Electrical design engineer jobs in Paterson, New JerseyCreate job alerts

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work Lockheed Martin Rotary & Mission Systems is seeking a full-time Senior Radar Systems Engineer. In this role, you will lead the design, analysis, testing, and requirements development and verification of high performance Radar Signal Simulation and Processing systems. The successful candidate will have experience and/or knowledge of Radar Signal Simulation & Processing, MATLAB Simulation Development, Requirements Development and Testing and Model Based System Engineering. This position is located at a facility that requires special access and will require a government security clearance. U.S. Citizenship is required. #REAS Qualifications: • Bachelor's degree in Electrical or Computer Engineering or equivalent technical discipline, • Five or more years of Systems Engineering experience, • Experience developing system and software requirements and associated analysis and testing, • Ability to obtain & maintain a DoD Security Clearance at the SECRET level. U.S. Citizenship is required.

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking an experienced Electrical Engineer to support multiple programs in the Integrated Warfare Systems & Sensors business. This position requires knowledge of electrical engineering principles, working in a team environment, and general knowledge of other related disciplines. Specific tasking will be but not limited to overall design of launcher electrical systems, including the selection and use of Commercial Off the Shelf components, custom hardware design, and setting requirements for chassis/enclosure design. Responsibilities include: • Support the electrical design sustainment of the MK41 Vertical Launching System and new and exciting designs of the next generation of launcher and weapon systems across various platforms., • Apply electrical engineering and electronics skills and have applicable knowledge of other related disciplines supporting successful design activities., • Coordinate with more senior internal or external personnel on significant technical matters., • Conduct or participate in the design, development, and testing of electronic and electrical components, sub-systems and systems., • Develop technical documentation such as initial design specifications, schematics, assembly drawings and parts list as well as preparing test procedures and reports to ensure customer and company requirements are met. Position is located in Moorestown, NJ. Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Moorestown, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. #rmshotmiljobs #rmslaunchers Qualifications: • Bachelor Degree or higher in Electrical Engineering or other related engineering or scientific field, • Minimum 2 years professional experience, • Experience supporting multi-disciplinary engineering teams in electronic system development, • Working experience in one or more of the following technical areas:, • Electrical System Integration/Development, • Complex Cable Design, • Printed Wiring Board (PWB) Design, • Circuit Card Assembly Design, • Electrical Bonding and Grounding of Enclosures, • FPGA Selection/Programming, • Ability to obtain & maintain a DoD clearance at the SECRET level

Job Description: What We're Doing Here at Lockheed Martin Rotary and Mission Systems (RMS) we take on the biggest and baddest challenges in the world. We seek out innovative ideas and creative solutions to seemingly impossible problems facing our customers in the Integrated Warfare Systems & Sensors (IWSS) organization. We collaborate with the best Radar engineers in the business across the Moorestown, NJ and Syracuse, NY sites to invent solutions where they don’t exist yet. We keep pushing the boundaries of Electronic Protection solutions to stay ahead of the adversary in the ever-evolving game of cat-and-mouse that is Electronic Warfare. If you’re looking for the challenge of a lifetime on a team of the brightest minds in the world, then Rotary Mission Systems and the Electronic Protection team is the place for you. If you’re looking for life-long learning and a career where the hard work is the fun part, then you’re in the right place. Lockheed Martin. Your Mission is Ours. The Work In your role as a Senior Systems Engineer – Radar Electronic Protection, you will: • Develop models and/or detailed simulations to support system design evaluation., • Conduct data analysis to assess system performance., • Write verification plans and test procedures showing traceability to system and software specifications., • Support integration and test, evaluate test results, investigate discrepancies, provide technical assessment of anomalies, and drive issues to resolution., • Conduct system verification and support certification activities., • Participate in landmark reviews of Radar System products with internal and external customers, program and senior leadership, and multi-disciplinary engineering teams., • Mentor junior engineers and share knowledge of Electronic Protection concepts. Who We Are Our Electronic Protection team of systems engineers and sensor architects all working together to deliver quality designs and cutting-edge capabilities to our customers. We support a broad array of Radar products and customers including the Missile Defense Agency, US Navy, Air Force, US Army, Space Force, and foreign partners including Japan, Canada, Spain, Norway, Australia, UK and more. Radar at Lockheed Martin Who you are If you enjoy a technical challenge that will get you thinking outside the box. If you seek a collaborative environment working with other motivated engineers. If you like getting your hands dirty in architecting new designs, digging into the nuances of algorithm performance, developing novel models, supporting live testing of tactical systems, or anything in between. If you’re ready to take on the complexities of an ever-evolving adversary driving new Electronic Protection designs, then this is the place for you. Why Join Us At Lockheed Martin we value your unique skills and expertise, and we aim to give back continuously by offering a wide variety of benefits and amenities to help our employees live flexible, healthy, and fulfilling lives at and outside of work. Some of our favorite perks include: Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Computer Science/Engineering, Physics or equivalent combined with 5 years of related experience., • Functional knowledge of Radar Systems., • Demonstrated experience in one or more of the following areas: system analysis, architecture, requirements development, trade studies, modeling and simulation, or integration and test., • High proficiency in C++ or Matlab or Python., • U.S. Citizen with ability to obtain or maintain a DoD Secret level clearance.

Job Description: WHAT WE'RE DOING As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. THE WORK Radar Systems Engineering within Rotary & Mission Systems (RMS) is seeking a candidate to support the design, integration, and test verification of high performance radar systems. The successful candidate will have strong analytic and communication skills, and work well in a dynamic, multi-disciplinary environment. The Radar Systems Engineer will: WHO WE ARE Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Camden, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #buildradars #rmshotmiljobs #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Systems Engineering, Computer Science/Engineering, Physics or related STEM degree with minimum 2 years' related experience., • Experience with C++ or equivalent object-oriented computing language, Matlab, and, scripting languages., • Demonstrated experience in two or more of the following areas: systems engineering, software and system analysis, requirements development, verification and validation, trade studies, modeling and simulation, or integration and test., • Ability to obtain and maintain a U.S. DoD security clearance at the SECRET level. U.S. Citizenship required.

Job Description: As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. The Work Radar Systems Engineering within Rotary & Mission Systems (RMS) is seeking a candidate to support the design, integration, and test verification of high performance radar systems. The successful candidate will have strong analytic and communication skills, and work well in a dynamic, multi-disciplinary environment. The Radar Systems Engineer will: Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Camden, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Learn more about IWSS Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! Explore some of the cutting‑edge technologies we support: ___ #buildradars #rmshotmiljobs #REAS Qualifications: • Bachelor’s degree or higher in Electrical Engineering, Systems Engineering, Computer Science/Engineering, Physics or related STEM degree with minimum 5 years' related experience., • High proficiency in C++ or equivalent object-oriented computing language, Matlab, and, scripting languages., • Demonstrated experience in two or more of the following areas: systems engineering, software and system analysis, requirements development, verification and validation, trade studies, modeling and simulation, or integration and test., • Experience working with customers to drive complex technical issues/challenges to closure., • Ability to obtain and maintain a U.S. DoD security clearance at the SECRET level. U.S. Citizenship required.

Who We Are: We're powering a cleaner, brighter future. Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient. We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco). In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career. Are you in? Primary Purpose: The EMS support group (ESG) creates and maintains the digital representation of the transmission grid. ESG s responsible for the maintenance and support of the data and functionality in the Energy Management System (EMS) and Total Outage Application (iTOA). Maintain all model related changes in the EMS and responsible for all database changes in iTOA. The model maintenance includes adding and updating ratings for the transmission equipment and contingency definitions. The engineers also provide support for all EMS application functionality. Provide real time engineering / operations support to System Operations staff focused on State Estimator and Contingency Analysis solutions. Development and review of operating procedures. Develops studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, commissioning, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, vehicles or facilities. Reviews financial data from budget and actual costs of projects. Operates independently and seeks guidance when appropriate. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Kennett Square - PA office. Primary Duties: • Performs engineering tasks associated with critical engineering projects or a number of small projects with many complex features., • Performs assignments in areas where engineering precedents are incomplete, lacking or require broad experience., • Evaluates, develops and implements projects that have moderate financial and operational impact., • May serve as an expert for organization in a specific area or responsibility that may include the delivery of classroom training and/or OJT/OJE. Job Scope:, • Influences project decisions having a moderate impact on the company that may include leading employees or contractors in the commissioning of electrical systems and equipment to be placed On System., • Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications:, • Bachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3), • Ability to analyze and interpret complex electrical and mechanical systems., • Knowledge and ability to apply problem solving approaches and engineering theory, • Knowledge of engineering designs, principles and practices., • Knowledge of complex field test equipment., • 4-7 years of professional engineering experience (1) (3) (See Note)., • Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specific, • Minimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR, • Engineer in Training OR, • 50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification, • (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications:, • Graduate degree (1) or Graduate level work in Engineering, Business Administration or Project Management Certification, • Licensed Professional Engineer (2) (3), • Strong teamwork, interpersonal skills and the ability to communicate with all management levels., • Strong written and oral communication skills. Benefits:, • Annual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $92,000.00/Yr. – $126,500.00/Yr., • Annual Bonus for eligible positions: 15%, • 401(k) match and annual company contribution, • Medical, dental and vision insurance, • Life and disability insurance, • Generous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave, • Employee Assistance Program and resources for mental and emotional support, • Wellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursement, • Referral bonus program

A well-established food manufacturing company in Totowa, NJ is adding a senior-level Automation Engineer to its second shift team. This isn't a role where you wait to be told what to do. You will own the floor from 3:00 PM to midnight, keep production running independently, and contribute to a major automation buildout that is already underway. ⠀ 𝗔𝗕𝗢𝗨𝗧 𝗧𝗛𝗘 𝗖𝗢𝗠𝗣𝗔𝗡𝗬 Pave Talent is hiring on behalf of our client, a privately held, family-owned food manufacturing company based in Totowa, NJ with over 100 years of combined management experience. They produce for a portfolio of well-known national food service and retail brands from a single, world-class facility. The company has effectively doubled its production capacity in the last three years and is now expanding aggressively into robotics and next-generation automation -- a robotic palletizer is already installed, with vision inspection systems on the way. ⠀ 𝗧𝗛𝗘 𝗢𝗣𝗣𝗢𝗥𝗧𝗨𝗡𝗜𝗧𝗬 You will report to the Engineering Manager and serve as the senior automation presence on the second shift (3:00 PM to 12:00 AM). The plant runs up to 24 hours a day, seven days a week. When something goes wrong on your shift, you are the person who resolves it -- not escalates it. Beyond production support, you will contribute to a significant pipeline of capital projects including new equipment controls, a plant-wide transport system rewrite, and an HMI migration from FactoryTalk View SE to Ignition Perspective. A companion junior role is also being filled for the morning shift. ⠀ 𝗪𝗛𝗔𝗧 𝗬𝗢𝗨'𝗟𝗟 𝗗𝗢 • Own automation troubleshooting and production support on second shift, operating independently with minimal supervision, • Write, modify, and improve PLC code (Rockwell Studio 5000 / ControlLogix) for production systems and capital projects, • Troubleshoot point-level sensors, VFDs, burner controllers, conveyors, operator interfaces, and networking issues as they arise on the floor, • Contribute to the plant's HMI migration from FactoryTalk View SE to Ignition Perspective and ongoing ISA-101 standardization, • Execute controls and automation upgrades for production equipment and the plant-wide automated transport system, • Build and design electrical control panels for capital projects using AutoCAD Electrical or Visio, • Support integration of automation systems with the company's Plex ERP platform, • Collaborate with the morning shift engineering team on cross-shift projects and handoffs, • Support growing robotics and end-of-line automation initiatives including the newly installed robotic palletizer and upcoming vision inspection systems ⠀ 𝗥𝗘𝗔𝗟 𝗧𝗔𝗟𝗞 The Engineering Manager is direct about what this shift requires: "We're looking for someone that's more of a self-starter and can do things unguided." You will have support from the broader engineering team, but second shift means real autonomy. If you need someone looking over your shoulder to feel confident, this isn't the right fit. If you thrive with ownership and want your work to be visible, this is exactly the right setup. Production runs around the clock. On-call coverage is part of the job, and occasionally that means a weekend. When it does, you get that time back. There is no overtime pay -- the flexibility goes both ways. ⠀ 𝗤𝗨𝗔𝗟𝗜𝗙𝗜𝗖𝗔𝗧𝗜𝗢𝗡𝗦 𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗱: • PLC programming experience -- ability to write and modify code confidently, not just troubleshoot, • Electrical troubleshooting skills: read and interpret schematics and control circuits, • Self-starter who can work independently with minimal supervision on second shift, • Comfortable in a live production environment where uptime is everything, • 3 to 5 years of experience in manufacturing, factory automation, system integration, or machine building, • Ability to speak to past project work with technical specificity -- not just buzzwords, • Authorized to work in the US without sponsorship 𝗕𝗼𝗻𝘂𝘀 𝗣𝗼𝗶𝗻𝘁𝘀: • Rockwell Studio 5000 / Logix Designer (ControlLogix or CompactLogix), • Ignition Perspective or SCADA system experience, • FactoryTalk View SE/ME, • Electrical control panel design (AutoCAD Electrical or Visio), • Bilingual English/Spanish (preferred for second shift, not required), • ERP integration experience (Plex or similar), • Background from system integrator, machine builder, or manufacturing company ⠀ 𝗖𝗢𝗠𝗣𝗘𝗡𝗦𝗔𝗧𝗜𝗢𝗡 𝗔𝗡𝗗 𝗕𝗘𝗡𝗘𝗙𝗜𝗧𝗦 𝗕𝗮𝘀𝗲 𝗦𝗮𝗹𝗮𝗿𝘆: $125,000 𝗕𝗼𝗻𝘂𝘀: Performance-based; historically up to 15% end-of-year, plus raises up to 10% 𝗦𝗰𝗵𝗲𝗱𝘂𝗹𝗲: Second shift, 3:00 PM to 12:00 AM 𝗢𝗻-𝗖𝗮𝗹𝗹: Rotating; comp time provided for weekend coverage (no overtime pay) 𝗕𝗶𝗹𝗶𝗻𝗴𝘂𝗮𝗹: English/Spanish preferred for this shift, not required 𝗪𝗼𝗿𝗸 𝗠𝗼𝗱𝗲𝗹: Fully on-site, Totowa, NJ (easily accessible from most of Northern NJ) 𝗖𝘂𝗹𝘁𝘂𝗿𝗲: Family-owned, tight-knit team -- strong performers have direct visibility to upper management and internal mobility is real ⠀ Interested? Apply via LinkedIn and we'll be in touch. Confidential search; your application is fully private. ⠀ 𝗣𝗮𝘃𝗲 𝗧𝗮𝗹𝗲𝗻𝘁 | 𝗛𝗶𝗿𝗶𝗻𝗴 𝗥𝗲𝗶𝗺𝗮𝗴𝗶𝗻𝗲𝗱

Title: Sr Electrical Engineer Location: Lodi, NJ (Relocation available) Compensation: $120–150k Benefits: Medical, Dental, Vision, 401k matching, product discounts, annual bonus potential Preferred Skills: Consumer product (CPG) electrical design and testing Overview: We’re hiring a Senior Electrical Engineer to play a key role in the full product development lifecycle of commercial-grade equipment, from concept and design through validation, production, and continuous improvement. This role combines hands-on testing, electromechanical troubleshooting, and cross-functional collaboration. You’ll partner closely with engineering, sourcing, marketing, sales, and production teams to ensure products meet real-world performance, reliability, and durability requirements. Job Duties: • Support electrical and electromechanical design throughout the full product development lifecycle, including concept, prototyping, validation, and production release., • Work with electromechanical components (motors, solenoids, sensors, etc.) across multiple product lines., • Lead product durability, performance testing, failure analysis, and continuous improvement initiatives., • Perform hands-on testing and validation in the Lodi workshop and provide technical guidance to in-house technicians., • Collaborate with overseas manufacturing partners to support design for manufacturability, quality standards, and production efficiency., • Conduct competitive benchmarking and translate findings into actionable design and performance improvements., • Create and maintain CAD models, schematics, and technical documentation using SolidWorks or Pro/Engineer (Creo)., • Provide cross-disciplinary troubleshooting support, including mechanical-focused issues when required., • Occasional travel (2–3 trips/year) for supplier visits, manufacturing support, and team collaboration. Qualifications: • 5–8 years of electrical or electromechanical engineering experience supporting mass-produced products., • Demonstrated experience working through the full product development lifecycle in a commercial or consumer product environment., • Background in rugged, commercial-grade, high-volume products., • Proficiency in SolidWorks or Pro/Engineer (Creo)., • Strong communicator with the ability to collaborate across engineering, manufacturing, and business teams., • Passion for designing and delivering durable, reliable, and high-performing products. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

ELECTRICAL ENGINEER/DESIGNER(ASSOC DEGREE, B.S E.E)SALARY 80-100K SCHEMATICS/WIRING Growing equipment company needs someone to design new electrical schematic diagrams from existing OEM ones. Will utilize Solidworks Electrical to design, oversee testing of electrical systems, assisting shop floor personnel in troubleshooting electro-mechanical problems. Will document bills of materials, assembly instructions, test instructions, corrected schematic diagrams, and provide audits and revisions of schematics. Position will require 2+ years experience in electro-mechanical design of equipment. Should be able to read electrical schematics, mechanical prints, and technical documents. Please email

Senior Electrical Engineer This Jobot Job is hosted by: Jim Forman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $155,000 - $175,000 per year A bit about us: We are seeking a dynamic and motivated Electrical Engineer to join our fast-paced engineering team. This role offers a fantastic opportunity for an experienced professional to work on a variety of projects, applying their expertise in electrical design, circuit design, and consulting. The successful candidate will be responsible for designing and developing electrical systems, working closely with various teams to ensure project objectives and timelines are met. The role requires a deep understanding of BIM, Arcc Flash, AutoCAD or Revit. Why join us? This is a fantastic opportunity for an experienced Electrical Engineer to join a dynamic and innovative team, working on a variety of exciting projects. If you have the required skills and experience, we would love to hear from you. Job Details Responsibilities: • Design and develop complex electrical systems and circuits, ensuring compliance with all relevant regulations and standards., • Use software such as AutoCAD or Revit to create detailed electrical design drawings., • Conduct detailed calculations to establish manufacturing, construction, and installation standards and specifications., • Collaborate with multidisciplinary project teams, providing electrical engineering expertise., • Use BIM and Arcc Flash for effective project management and coordination., • Provide consulting services to clients, advising on best practices, potential improvements, and cost-effective strategies., • Conduct thorough inspections to identify faults and issues, implementing corrective actions where necessary., • Stay updated with the latest advancements in electrical engineering and propose new innovative solutions to improve project efficiency and effectiveness., • Bachelor’s degree in Electrical Engineering or a related field from an accredited institution., • A minimum of 5 years of experience in electrical engineering, specifically in design and consulting., • Proficient in the use of design software such as AutoCAD or Revit., • Extensive experience with BIM and Arcc Flash., • Proven experience in developing complex electrical designs and circuit designs., • Excellent analytical and problem-solving skills., • Strong communication and consulting skills, with the ability to effectively present complex technical information., • Detail-oriented with a strong focus on quality and accuracy., • Ability to manage multiple projects concurrently and meet tight deadlines., • Professional Engineering (PE) license is preferred. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications Your job scope will include: * Build and qualify next-generation chemical metrology tools. * Read and interpret schematics and electrical drawings. * Test and troubleshoot using diagnostic equipment, including test programs, signal generators, oscilloscopes, and specialized test apparatus. * Partner with the engineering team to bring new products into manufacturing. * Act as a two-way conduit of information between design teams, tech support, and field teams. * Demonstrate strong oral and written communication skills. * Redline and help update documentation, including assembly and test procedures. * Assist with training new team members and transferring knowledge to production. * Travel to domestic and international beta sites to support new tool installations/upgrades and provide escalation support for new products. Required Qualifications: * Practical Engineer or B.S degree in Electrical Engineering or Electronics Engineering. * Experience troubleshooting down to the component level is required. * Ability to travel up to 35% to support customers worldwide. Minimum Qualifications: * Minimum 4 years of experience in various engineering areas such as Electrical, Manufacturing, Equipment, Systems, or related fields. * Broad technical system vision. * Proficient in English, including reading and writing technical reports, procedures, and drawings. Soft Skills: * Strong interpersonal and communication skills; able to work collaboratively. * Willingness to work overtime, including day or night shifts and weekends. Minimum Qualifications Requires a minimum of 4 - 6 years of related experience Base Pay Range: $25.97 - $44.14 Per Hour Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications With over 40 years of semiconductor process control experience, chipmakers around the globe rely on KLA to ensure that their fabs ramp next-generation devices to volume production quickly and cost-effectively. Enabling the movement towards advanced chip design through greater chemical process control is KLA's ECI Technology division. ECI is an industry leader of in-process chemistry control, providing the precision of analysis the industry requires for consistent wafer quality while reducing chip feature size. Advanced wafer design drives the need for precision with reliability; ECI strives to lead the design of analytical equipment which can withstand the rigorous demands of the chemical processes for damascene, wafer-level packaging, clean and wet etch processes, with our Prima, Libra, Quanta and QualiSurf product lines. A successful Mechanical Design Engineer will work in the Mechanical Department of KLA ECI division based in Totowa, NJ. You will be responsible for the design process of mechanical part of new systems, including conceptual and detailed design using CAD systems (Autodesk Inventor, AutoCAD), detailed drawings, design review presentations. • Independently execute sustaining engineering projects by creating and updating 3D CAD models, subassemblies, and system layouts for analyzers and dosers derived from existing platforms., • Develop flow diagrams and system schematics based on customer requirements and engineering specifications., • Design and integrate mechanical, fluidic, and optical assemblies (e.g., pumps, valves, tubing, fittings, spectrometers, light sources, optics, electrodes, and motors) to ensure proper mounting, alignment, routing, and service access., • Create and maintain bills of material (BOMs) to support manufacturing, service, and supply chain., • Prepare documentation packages for release (e.g., drawings, assembly instructions, installation layouts, labeling, and supporting engineering documents) in accordance with internal standards., • Adapt designs for different chemistries, including material compatibility, wetted-path requirements, sealing approaches, tubing/fitting selection, and corrosion/chemical resistance considerations., • Adapt designs for varying tank counts and configurations, including sizing/arrangement, mounting, plumbing routing, access/service clearances, and shipping constraints., • Define facility requirements (utilities, footprint, clearances, and interface constraints) for system layouts based on customer site requirements., • Create and process Engineering Change Orders (ECOs) / Change Orders (COs) to release new or revised parts, assemblies, and documentation; maintain traceability and accurate revision history., • Bachelor's degree in Mechanical Engineering or related discipline (or equivalent practical experience)., • 2-5 years of mechanical design experience in electro-mechanical products, instruments, or industrial equipment; sustaining engineering experience preferred., • Proficiency with 3D CAD and drawing creation (e.g., SolidWorks, Creo, Inventor, or similar), including assemblies, subassemblies, and configuration management., • Ability to create/read system schematics and flow diagrams (P&ID-style) and translate customer requirements into mechanical layouts., • Working knowledge of fluidic component selection and integration (pumps, valves, tubing, fittings) including routing, serviceability, and leak prevention., • Exposure to optical/electrochemical/mechatronic hardware integration (mounting, alignment, cable/tube management, access for calibration and maintenance)., • Experience creating and maintaining Bills of Material (BOMs) and supporting documentation packages (drawings, assembly instructions, installation layouts, labeling) to internal standards., • Understanding of material compatibility and chemical resistance considerations for wetted-path designs (seals, elastomers, plastics, metals) and corrosion/compatibility tradeoffs., • Knowledge of basic manufacturing methods and DFM/DFA principles; ability to assess tolerance stack-ups and perform fit checks., • Familiarity with engineering change control processes (ECO/CO), revision history, and traceability in a PLM/ERP environment., • Hands-on prototype/build support and troubleshooting skills, including root-cause analysis and implementation of corrective actions., • Strong communication and cross-functional collaboration skills (manufacturing, service, supply chain, and systems/electrical engineering); able to work independently and manage multiple priorities. Minimum Qualifications Master's Level Degree and 0 years related work experience; Bachelor's Level Degree and related work experience of 2 years Base Pay Range: $85,600.00 - $145,500.00 Annually Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications With over 40 years of semiconductor process control experience, chipmakers around the globe rely on KLA to ensure that their fabs ramp next-generation devices to volume production quickly and cost-effectively. Enabling the movement towards advanced chip design through greater chemical process control is KLA's ECI Technology division. ECI is an industry leader of in-process chemistry control, providing the precision of analysis the industry requires for consistent wafer quality while reducing chip feature size. Advanced wafer design drives the need for precision with reliability; ECI strives to lead the design of analytical equipment which can withstand the rigorous demands of the chemical processes for damascene, wafer-level packaging, clean and wet etch processes, with our Prima, Libra, Quanta and QualiSurf product lines. Successful Product Development Engineer will work in the System Engineering group based in Totowa, NJ.You will be working in the Engineering Technology team to conceptualize, develop and test the next generation of devices which will be used to advance our chemical analysis technology. This is a wide-ranging requirement which covers aspects from microfluidic dispensing to spectrophotometric measurements. This role will involve requirements analysis, theoretical evaluation on the capabilities of available technologies, identification of the gaps and definition of the actions required to close those gaps, conceptual design, and requirements of new devices if existing technologies are not a fit and testing of the designs with reports generated to support the conclusions. Communication skills are important, there are requirements for communication with suppliers and the internal KLA groups. Job Definition: * Work with Applications, R&D and engineering to define requirements and develop specifications for the chemical analysis process. * Develop improvement plans and test plans required to meet our requirements, drive the vendors to execute those plans. * Evaluate and test to validate materials used for devices or new designs, to determine compatibility to the chemistry used in the application. * Conceptualize and bring to fruition new device designs when none exist. Define the requirements, gaps that the device fills, error budget and constraints. * Work with mechanical, electrical and software engineering groups to define and review designs and test plans. Create and execute test plans and perform analysis to validate device or system performance. Troubleshoot system and subsystem issues and work with various subsystem teams to find and implement solutions. * Support internal and external customers in implementing processes to build and use the tool effectively and optimize tool performance. Lead advanced troubleshooting efforts in manufacturing and in the field * Occasional domestic and international travel will be required (<20%) Preferred Qualifications: * Master's Level Degree and 0 years related work experience; Bachelor's Level Degree and related work experience of 2 years. * Experience with electrical design ecosystems such as OrCAD PCB, Altium, PADS, or Eagle; exposure to SI/PI or simulation tools is a plus. * Familiarity with AC power distribution, industrial equipment cabling, interlocks, and serviceability-driven design. * Exposure to PLC/control systems, motion control, sensors, and system-level debug of integrated mechatronic equipment. * Comfortable building and executing test plans, analyzing data, and reporting conclusions (MATLAB/Python/LabVIEW experience is a plus in our environment). * Strong collaboration and communication skills for cross-disciplinary execution and vendor engagement. * Experience supporting products through manufacturing/field life cycle and writing crisp, usable documentation Minimum Qualifications Master's Level Degree and 0 years related work experience; Bachelor's Level Degree and related work experience of 2 years Base Pay Range: $85,600.00 - $145,500.00 Annually Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Job Title: RF Test Technician Job Description This role focuses on the design, development, documentation, and production support of RF and Microwave components, including active and passive devices, for the telecommunications industry. The RF Test Engineer performs hands-on testing, troubleshooting, and optimization of RF components and systems across prototype and production stages, ensuring high performance and reliability for a growing portfolio of products. Responsibilities • Design, develop, and document RF and Microwave components, including active and passive devices, for telecommunications applications., • Follow established RF test procedures and accurately complete detailed test reports for all tested products., • Troubleshoot and optimize discrete power amplifier modules and low noise amplifiers (LNAs) at both prototype and production stages., • Define and construct RF test setups to measure VSWR, gain, group delay, phase variation, IP3, P1dB/P3dB compression points, noise figure, and harmonics for narrowband and broadband high-power amplifiers., • Perform RF testing using network analyzers, power meters, noise figure meters, and other RF laboratory test equipment., • Define and construct test setups to measure VSWR, insertion loss, group delay, and phase variation for passive filtering products., • Test, characterize, and optimize Distributed Antenna Systems (DAS) related equipment such as bi-directional amplifiers and tower-mounted amplifiers for public safety and carrier applications., • Read, interpret, and work from electronic and mechanical blueprints to support testing and troubleshooting activities., • Communicate technical information clearly and professionally with internal teams and clients., • Manage multiple tasks and priorities simultaneously while adapting quickly to changes in production requirements., • Document new RF designs and test configurations to support future repeat orders and ongoing production., • Perform component-level troubleshooting and board repair using oscilloscopes, spectrum analyzers, network analyzers, and other test equipment., • Use test equipment and tools, including microscopes, to support detailed inspection, soldering, and rework activities., • Apply strong electronics and electrical knowledge to analyze schematics, PCB layouts, and test results., • 3–5 years of hands-on experience in testing and optimizing active and passive discrete RF components., • Strong RF testing experience using network analyzers, spectrum analyzers, power meters, noise figure meters, and other RF laboratory test equipment., • Proficiency in defining and building RF test setups to measure VSWR, gain, group delay, phase variation, IP3, compression points, noise figure, harmonics, and other key RF parameters., • Experience in testing and optimizing power amplifier modules and low noise amplifiers (LNAs) in both prototype and production environments., • Ability to test and characterize passive RF filtering products, including measurement of VSWR, insertion loss, group delay, and phase variation., • Full understanding of Distributed Antenna Systems (DAS) and the ability to test and optimize bi-directional and tower-mounted amplifiers for public safety and carrier systems., • Component-level troubleshooting skills for RF and electronic assemblies, including board-level repair., • Ability to read and interpret electronic and mechanical blueprints, schematics, and technical drawings., • Proficiency with general electronic test equipment such as oscilloscopes, network analyzers, spectrum analyzers, and other laboratory instruments., • Strong electronics and electrical fundamentals, including practical experience with PCB-level diagnostics and soldering., • Ability to read and speak English and interpret documents such as safety rules and operating procedures., • Strong interpersonal and communication skills, with the ability to work effectively within a team and independently., • Experience documenting new RF designs and test configurations for repeat production orders., • Experience working within a structured RF test engineering or RF test technician team., • Ability to communicate technical concepts clearly to both technical and non-technical stakeholders, including clients., • Strong organizational skills with the ability to manage multiple tasks and shifting priorities in a production environment., • Attention to detail in test execution, data recording, and reporting., • AutoCAD experience or familiarity is a plus for working with mechanical drawings and layouts., • Experience using microscopes and fine-pitch soldering techniques for board-level rework is beneficial., • Demonstrated ability to contribute to continuous improvement in test processes and product performance. The RF Test Engineer works as part of a dedicated RF Test Technician and Engineering team, collaborating closely with test engineering and design engineering leadership. The environment is laboratory and production oriented, with daily use of RF test equipment such as network analyzers, spectrum analyzers, power meters, noise figure meters, oscilloscopes, and microscopes. The role involves hands-on work at test benches and production lines, supporting both prototype development and volume manufacturing. The organization is experiencing significant growth, introducing new RF and Microwave products, which creates opportunities to support new designs, improve processes, and contribute to the expansion of the business. The culture emphasizes teamwork, clear communication, adherence to safety rules and operating procedures, and a balance of independent and collaborative work. Job Type & Location This is a Contract to Hire position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $25.00 - $33.65/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Embedded Engineer (Microprocessors) We are seeking a seasoned Electrical Engineer, embedded engineer to design and program complex electrical systems. Responsibilities: • Engineered and designed microprocessor-based, mixed-signal circuit boards for specialized products, • Developed C language embedded software for servos, ensuring smooth interaction with external systems., • Led the construction and testing of prototype circuits, providing guidance to design and technical teams., • Authored comprehensive product documentation, including user instructions, project logs, test reports, and design evaluations., • Collaborated with Manufacturing to facilitate product commercialization, manage bills of materials, and develop documentation and test fixtures., • A minimum of 8+ years of experience in electro-mechanical applications, • Strong theoretical background, • Proficiency in circuit board design, schematic generation, and PCB layout tools, • Expertise in open/closed-loop servo mechanisms, motor design, and inverter development., • Experience in power supply development and industrial process control., • Ability to multitask in a hands-on environment., • Proven ability to work effectively in team settings and independently., • Provides project management assistance for control systems as needed., • Microsoft Office products to perform engineering and project management tasks., • Ability to write routine reports and correspondence., • Effectively present information to top management, customers, and employees., • Apply mathematical operations to such tasks as determination of test reliability and validity, analysis of variance, correlation techniques, and factor analysis., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Close vision, and color vision ability required, • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, reaching, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base & bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success. We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description We are seeking a dedicated Electrical Control Engineer to lead the design and development of industrial automation systems for web processing machinery. This role focuses on creating high-performance electrical control equipment and advanced software solutions in a stable, long-term engineering environment. Responsibilities * Design and develop electrical control systems, PLC software, HMI interfaces, and servo programs for industrial machinery. * Provide electrical design and programming based on existing PID algorithms and motion control requirements. * Install and provide technical support for PLC based hardware and software systems. * Inspect, install, troubleshoot, and debug machinery throughout the manufacturing process and prior to shipment. * Perform internal acceptance testing and support Factory Acceptance Testing and Site Acceptance Testing. * Manage equipment startup at client sites with domestic and international travel of approximately 15 percent. * Coordinate with international customers which may require interface during off-normal hours. * Design electrical panels and integrate control components into final machinery designs. * Estimate project costs, reliability factors, and safety requirements. * Generate detailed electrical panel layouts, electrical schematics, and Bills of Materials for component procurement. * Collaborate with purchasing and manufacturing teams to facilitate system assembly and parts procurement. * Determine project specifications by analyzing product design, customer needs, and performance standards. * Maintain and update engineering drawings, electrical schematics, and technical documentation for new and existing equipment. * Execute projects effectively both as part of a collaborative team and as an independent contributor. Qualifications * Bachelor of Science or Bachelor of Arts degree in Electrical Engineering is required. * Minimum of 5 years of experience in electrical controls engineering or industrial automation. * Direct experience with Allen Bradley PLCs and FactoryTalk View software. * Proficiency with Lenze VFDs including 8400 and 9400 series. * Strong background in motion control, servo motors, AC/DC motors, and tuning PID loops. * Expertise in industrial networking, including switches, routers, and Ethernet I/P protocols. * Experience designing power distribution systems for 220VAC and 480VAC industrial environments. * Working knowledge of electrical design standards including UL, NEMA, and CE codes. * Familiarity with equipment safety codes, SIL ratings, and the use of safety PLCs and relays. * High proficiency in AutoCAD or equivalent electrical design software. * Advanced skills in Microsoft Office Suite for technical documentation and project tracking. Compensation & Benefits • Competitive compensation package, • Health insurance, • 401(k) retirement plan, • Life and disability insurance, • Paid time off (PTO), • Stable, long-term career opportunity, • Salary Position, $100,000 – $120,000 depending on relevant experience

Job DescriptionJob Requirements Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communication, and mentorship of engineering and design staff, you elevate project quality, improve constructability, reduce risk, and strengthen Stark Tech's reputation for delivering high-performance mechanical infrastructure. Work Experience • Associate degree required; Bachelor's degree preferred. Advanced degree a plus., • 10+ years of experience in mechanical building systems or energy-driven infrastructure projects., • Proven experience leading projects and managing engineering or cross-functional teams., • Expertise in HVAC system design, load calculations, equipment selection, air and fluid distribution, and central plant systems., • Experience defining sequences of operation and integrating mechanical systems with BAS platforms., • Proven ability to conduct system retrofits, upgrades, and performance optimization analyses., • Thorough knowledge of applicable codes, safety standards, and environmental/regulatory considerations., • Skilled in creating Basis of Design documents, narratives, specifications, and construction documentation., • Experience coordinating mechanical designs with electrical, structural, controls, and architectural teams., • Proven ability to mentor junior engineers and influence cross-functional project teams., • Strong customer-facing communication skills. Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment.

Job Description Director of Data Center Facility Operations - Totowa, NJ This opportunity is working directly with a leading mission-critical data center developer. This company provides turnkey data center solutions custom-fit to the requirements of their client's ever-changing mission-critical facility's operational needs. They accomplish this by providing reliability of mission-critical facilities for many of the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for an experienced Data Center Facility Operations Director to support a major critical data center. The Director will be responsible for managing the overall quality and service of the operation and maintenance of critical facility infrastructure systems in accordance with company's policies and procedures. This Data Centers is a 7x24x365 a year operation. The director will work with the Chief Engineer in maintaining relationships with various customers. The successful candidate will oversee the work performed by in-house facilities team to ensure the site is meeting the high and dynamic standards of its internal customers. The successful candidate will also provide consistent leadership and support through planning, communicating, and managing a team of professionals responsible to deliver data center facility services. Responsibilities include the delivery of quality and consistent services and support as established by the Corporation while satisfying unique customer requirements, managing issue resolution and ensuring proper performance reporting of key metrics for the site, establishing goals and objectives for the region based on strategic and business plans of the corporation. Responsibilities: • Performing periodic site walk-throughs in order to ensure Company's procedures (SOPS and MOPS) and standards are followed. This includes assisting the Facilities Manager, Technicians and any other contracted vendors, • Identifying any vulnerabilities while overseeing 3rd Party Critical Facilities onsite team, • Communicating the status of the operation process with senior management and onsite customers, • Site acceptance and commissioning of the facility to ensure the site meets the superior and dynamic standards of Company Standards, • Acting as liaison and coordinating efforts between the contracted vendors and the onsite customers, • Oversee the development of procedures/Method of Procedures (MOPs) for the DC build in addition to approving MOPs for data hall work, • Participating in the interview process for prospective candidates applying to this critical facility, • Auditing installed data center components. This audit will be used to verify the completion of the job scope by the vendor in addition to verifying the design documentation for the build-out and ongoing operations of the data hall space, • Provide strategic / tactical leadership with a background in best practices related to operations for performance and reliability on a variety of state of the art critical systems such as: medium voltage switchgear, diesel generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, fire detection / suppression; building monitoring systems; etc., • Supervise the on-site management; the facility manager, facility technicians, sub-contractors and vendors, ensuring that all work is performed according to established practices and procedures, • Manage Customer Relationship and act as escalation point of contact for the company at this site, • Manage the establishment of performance benchmarks, conduct analyses and prepare reports on all aspects of the critical facility operations and maintenance., • Work with business leaders to coordinate projects, manage capacity and optimize plant safety, performance, reliability and efficiency, • Review MOPs and SOPs for all work on critical data center facility equipment, • 10-15+ years of data center facility operations and maintenance experience, • 5 years leadership experience in data center facility operations, • Budget / P/L responsibility, • Solid Understanding of Critical Electrical and Mechanical / HVAC equipment, • Experience supervising a technical data center operations staff, • Previous experience as a Data Center Facility Manager a must, • Strong verbal and written communications skills, • Good presentation skills in leading meetings (both conference and in person), • Superior analytical, planning and problem resolution skills Knowledge of Company Services and operations structure and support operations, • Highly organized with proved project management abilities, • Ability to multitask, establish priorities, manage conflicts, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus - Navy Nukes that were part of the Navy Nuke Program - EMN, ETN, MMNs; Seabees; Army - Power Generation; Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.) Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description We are a premier architectural lighting design and manufacturing company in northern New Jersey seeking a Lighting Applications Product Engineer to join our team. This role is ideal for someone who enjoys working at the intersection of architectural design, product engineering, and real-world manufacturing. You will play a key role in supporting sales by translating architectural requirements conveyed in ceiling plans into functional configurations of our products, providing approval and manufacturing drawings, and helping support the manufacturing process to ensure successful production execution. Key Responsibilities • Extract detailed requirements from architectural drawings in support of sales process., • Collaborate with sales teams to evaluate fixture capabilities that align with project goals, • Design and layout companies commercial lighting fixtures to meet architectural and performance requirements, • Create and/or revise detailed CAD drawing submittals for client approval, • Create drawings and CNC control programs for factory fabrication of lighting fixtures, • Work closely with manufacturing to ensure feasibility, efficiency, and quality, • Troubleshoot and resolve technical issues related to fabrication and installation Qualifications • Bachelor’s degree in Engineering, Industrial Design, or related field (or equivalent experience), • Experience in:, • Lighting industry, OR, • Product design / engineered-to-order manufacturing, • Proficiency in AutoCAD, SolidWorks, or similar CAD software, • Strong understanding of:, • LED lighting systems and components, • Electrical fundamentals (drivers, wiring, controls), • Manufacturing processes (sheet metal, extrusion, assembly), • Ability to interpret architectural drawings and specifications, • Strong communication and problem-solving skills Compensation & Benefits • Salary: $60,000 – $80,000 (based on experience), • Health benefits, • Paid time off, • Opportunity to work on custom, high-impact projects in a growing company Why Join Us • Work on unique, custom-engineered products—not commodity items, • Direct impact on projects from concept through manufacturing, • Collaborative environment with engineering, sales, and production, • Opportunity for growth in a specialized, high-value niche Apply Now If you are a motivated engineer who enjoys solving real-world design challenges and working with both customers and manufacturing teams, we’d like to hear from you.

Job Description Job Title: Senior Electrical Engineer Location: Hackensack, NJ (Relocation assistance available) Compensation: $135,000 - $150,000/year Benefits: Medical, Dental, Vision, 401k matching, product discounts, annual bonus potential Preferred Skills: Consumer product (CPG) electrical design and testing Position Summary: We’re hiring a Senior Electrical Engineer to play a key role in the full product development lifecycle of commercial-grade equipment, from concept and design through validation, production, and continuous improvement. This role combines hands-on testing, electromechanical troubleshooting, and cross-functional collaboration. You’ll partner closely with engineering, sourcing, marketing, sales, and production teams to ensure products meet real-world performance, reliability, and durability requirements. Job Duties: • Support electrical and electromechanical design throughout the full product development lifecycle, including concept, prototyping, validation, and production release., • Work with electromechanical components (motors, solenoids, sensors, etc.) across multiple product lines., • Lead product durability, performance testing, failure analysis, and continuous improvement initiatives., • Perform hands-on testing and validation in the Lodi workshop and provide technical guidance to in-house technicians., • Collaborate with overseas manufacturing partners to support design for manufacturability, quality standards, and production efficiency., • Conduct competitive benchmarking and translate findings into actionable design and performance improvements., • Create and maintain CAD models, schematics, and technical documentation using SolidWorks or Pro/Engineer (Creo)., • Provide cross-disciplinary troubleshooting support, including mechanical-focused issues when required., • Occasional travel (2–3 trips/year) for supplier visits, manufacturing support, and team collaboration. Qualifications: • 5–8 years of electrical or electromechanical engineering experience supporting mass-produced products., • Demonstrated experience working through the full product development lifecycle in a commercial or consumer product environment., • Background in rugged, commercial-grade, high-volume products., • Proficiency in SolidWorks or Pro/Engineer (Creo)., • Strong communicator with the ability to collaborate across engineering, manufacturing, and business teams., • Passion for designing and delivering durable, reliable, and high-performing products.

Job Description Title: Sr Electrical Engineer Location: Lodi, NJ (Relocation available) Compensation: $120–150k Benefits: Medical, Dental, Vision, 401k matching, product discounts, annual bonus potential Preferred Skills: Consumer product (CPG) electrical design and testing Overview: We’re hiring a Senior Electrical Engineer to play a key role in the full product development lifecycle of commercial-grade equipment, from concept and design through validation, production, and continuous improvement. This role combines hands-on testing, electromechanical troubleshooting, and cross-functional collaboration. You’ll partner closely with engineering, sourcing, marketing, sales, and production teams to ensure products meet real-world performance, reliability, and durability requirements. Job Duties: • Support electrical and electromechanical design throughout the full product development lifecycle, including concept, prototyping, validation, and production release., • Work with electromechanical components (motors, solenoids, sensors, etc.) across multiple product lines., • Lead product durability, performance testing, failure analysis, and continuous improvement initiatives., • Perform hands-on testing and validation in the Lodi workshop and provide technical guidance to in-house technicians., • Collaborate with overseas manufacturing partners to support design for manufacturability, quality standards, and production efficiency., • Conduct competitive benchmarking and translate findings into actionable design and performance improvements., • Create and maintain CAD models, schematics, and technical documentation using SolidWorks or Pro/Engineer (Creo)., • Provide cross-disciplinary troubleshooting support, including mechanical-focused issues when required., • Occasional travel (2–3 trips/year) for supplier visits, manufacturing support, and team collaboration. Qualifications: • 5–8 years of electrical or electromechanical engineering experience supporting mass-produced products., • Demonstrated experience working through the full product development lifecycle in a commercial or consumer product environment., • Background in rugged, commercial-grade, high-volume products., • Proficiency in SolidWorks or Pro/Engineer (Creo)., • Strong communicator with the ability to collaborate across engineering, manufacturing, and business teams., • Passion for designing and delivering durable, reliable, and high-performing products. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description The Role We are looking for a Senior Project Engineer to provide comprehensive applications/project engineering support for our distributed energy and microgrid projects. Our projects typically include managing a variety of DER and microgrid assets such as solar, energy storage, controls, and reciprocating engines. You will report to our VP of Project Engineering and Preconstruction and will work a hybrid schedule out of one of our offices in Ridgewood, NJ, NYC, Oakland, CA, or Santa Monica, CA. Key responsibilities will include: • Utilize your strong technical and communication skills to interface with all aspects of the business and customers., • Work extensively with our execution (project management) team to deliver turn-key solutions for our customers within budget and per schedule., • Work with the business development, execution, and commercial teams on specific projects to ensure the integration of the microgrid is technically correct, practical, and cost-effective. This includes working with existing service entrance one-line drawings or creating new ones, to provide the best design interface for functionality and cost., • Investigate the interconnection, which includes modifications to existing design concepts that are applicable for each site., • Work with switchgear manufacturers and other equipment OEMs to develop innovative designs and costing that are scalable to many jobs and customer sites. This includes working at voltage levels of 23kV, 3.8kV, 4.16kV, 480V, and 208V, depending on site and system size., • Provide significant input to the solar, battery, and generator designs to optimize performance, reliability, and sustainability for each customer site., • Directly manage engineering consultants in the preparation of detailed engineering and construction drawings and specifications for 30%, 60%, 90% Issue for Permit, and 100% Issue for Construction drawing packages. The Ideal Candidate • 7+ years of experience in the design and construction of power/generation/renewable energy projects, • Thorough technical understanding of distributed energy technologies, including some combination of solar, battery, and reciprocating engines/turbines, • Understanding of rotating power with reciprocating engines in the 200 to 2000 kW size range per engine. This includes parallel operation with the utility as well as with other DERs, both in grid parallel and island mode operations., • Solid understanding of the utility side of the interconnection., • Knowledge of the various DER power sources within the Microgrid and how they best interface with the utility to provide the most efficient system., • Knowledge of emissions from the utility side, as well as each of the DERs., • Knowledge of systems controls for all the DERs and how they can be utilized to accomplish specific operating goals while part of the Microgrid. These goals provide economic return to the customer and us., • Experience in submitting interconnection applications, reviewing Utility studies, which may include Detailed Studies, Facility Studies, and System Impact Studies., • Excellent communication skills, including the ability to communicate with technical and non-technical people to make projects work., • AutoCAD experience (for creating conceptual one-line diagrams and site layouts), • BS in Electrical Engineering with a focus on the power side, • PE in power or progressing towards that license

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job Description Civil Engineer – Wayne, NJ Municipal/Civil Engineering design and construction phase support for our Wayne, NJ office. B.S. in Civil Engineering, minimum EIT Certified and 3+ years of related public sector experience preferred. This is a full-time position with a strong benefits package. About our Company For over fifty-five years, Alaimo Group has provided engineering and planning services throughout the State of New Jersey and in the neighboring states of Pennsylvania and Delaware. Our firm is a composite of civil, sanitary, environmental, architectural, planning, structural, mechanical, electrical and hydraulic engineering individuals. We are one of the few firms that specialize in work for the public sector, thus avoiding any appearance of conflict in providing service to our clients. We have experienced continued growth in the number of people and the range of disciplines represented, and the capabilities of our professional and support staff. We now have some 100 employees, including some fifty registered engineers, surveyors, planners and scientists and three registered architects. These design professionals are supported by technicians, designers, drafters, survey and mapping teams and field services representatives. In the last fifty-five years, Alaimo Group designed and provided construction administration services for projects with a total estimated construction value in excess of $10 billion dollars. Alaimo Group, Inc. is an Affirmative Action / Equal Opportunity Employer.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $70-$85/hr (depending on prior experience) Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR QpHnpP1sVI

Job Description T&M Associates is seeking a highly motivated Group Manager to lead our Mechanical, Electrical, and Plumbing (MEP) team in New Jersey. This position can support from any of our NJ offices and offers a hybrid work arrangement, combining remote work with in-office collaboration The Group Manager will play a key leadership role in managing team operations, ensuring project excellence, and supporting strategic business growth. With support from our local disciplines and a well-established MEP Practice in other regions, this individual will be instrumental in strengthening client relationships and driving new opportunities across both public and private sectors. Key Responsibilities: • Lead, mentor, and manage a team of mechanical, electrical, plumbing, and fire protection engineers., • Oversee day-to-day team operations to ensure high-quality, timely project delivery., • Supervise design and construction administration tasks across disciplines., • Serve as the primary liaison between clients and internal project teams., • Participate in strategic business planning and assist with project selection., • Drive continuous improvement in technical execution and team processes., • Ensure all work complies with applicable codes, standards, and industry best practices., • Monitor group performance against departmental KPIs and support overall business goals., • Foster and maintain client relationships to support ongoing and future business., • Identify and pursue new business development and acquisition opportunities., • Bachelor’s Degree in Mechanical Engineering or a related field is required., • 10+ years of experience in mechanical engineering, including MEP/facilities design., • Professional Engineer (P.E.) license preferred, • Proven project management and team leadership experience., • Strong understanding of industry codes, standards, and compliance., • Proficient in AutoCAD and Revit; hands-on design experience preferred. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description T&M Associates is seeking a Senior Staff Designer / Engineer with 4+ years of experience to join one of our New Jersey Offices. This position will be in the MEP Practice with a primary focus on plumbing and fire protection engineering. Qualifications: • Design of plumbing and fire protection systems for buildings. This may include domestic hot and cold water, sanitary and vent, storm drainage, natural and medical gas, compressed air, sprinkler, fire pump, and clean agent fire suppression systems., • Preparation of construction documents including calculations, drawings, details, and specifications., • Construction administration services such as site visits, construction meetings, review of submittals, and responding to RFI’s., • B.S. in Mechanical Engineering or a related field required., • EIT Certification or PE License is preferred, not required., • 4+ years prior experience in designing plumbing and fire protection systems., • Experience with and knowledge of Microsoft Word, Excel, AutoCAD and Revit required., • Ability to interact with all levels of employees, especially Mechanical, Electrical and Structural Engineers., • Willing to learn new interesting technical fields., • Excellent written and verbal communication skills., • Ability to work on several projects at once. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. #LI-HYBRID

Job Description Bosch Building Technologies LLC seeks Software Engineer II (Multiple Positions) at its facility located at 300 Broadacres Dr, Bloomfield, New Jersey 07003. Provide controls database, graphics, programming, etc. for contract sequences as provided by the Design Specialist, project specifications, or other applicable sources (10%). Develop the software necessary for a comprehensive integrated building automation system or energy management system (10%). Integrate with other 3rd party systems into building management systems using protocols like MQTT and RESTful API (10%). Work with multiple proprietary systems to make them talk on a unified platform using specialized software and specialized code (10%). Work with other building equipment suppliers to resolve issues as they arise (5%). Develop project reports to measure building analytics and provide energy savings recommendations (3%). Support installation and startup personnel with adjustments to software as required (3%). Support field teams with system data communication trouble shooting using protocol analyzers like WireShark® and Visual BACnet® (3%). As required, attend project coordination meetings and provide technical support (2%). Provide site specific customer training on projects (2%). Provide information and support for other contractors on project site (2%). Debug mechanical and installation issues that can come up when executing the static and dynamic start up and commissioning of building controls (5%). Develop branch standards for building management system software and client graphic user interface systemS (10%). Develop enhancements to existing office standards to increase functionality and efficiency (5%). Provide new product support and training to employee personnel (3%). Provide service support on existing systems ensuring proper and efficient operation as well as providing ongoing support to the facility’s building engineers (3%). Work with the internal project design engineers and outside engineer consultant firms to resolve project design issues and suggest project enhancements (3%). Participate in the transition between Operations Team and Service Team (1%). Support the sales team during project bid and estimating process, including potential customer system demonstrations (2%). Mentor and train junior software engineers on products, software and processes (5%). Complete all office safety requirements and demonstrate safe practices while working in the office or on-site (1%). Complete time sheets, service work orders, and other paperwork required for this position in an accurate and timely manner (2%). REQS: This position requires a bachelor’s degree, or foreign equivalent in Mechanical Engineering, Electronic Engineering, Electrical Engineering, Mechatronic Engineering, HVAC Controls or a related field. Plus 5 years of experience as a System Specialist, System Engineer, or occupation involving HVAC Controls engineering. Additionally, the applicant must have employment experience with: (1) Building systems including HVAC, plumbing, mechanical and electrical systems; (2) HVAC systems control strategies; (3) BMS systems software programming; (4) Networking system switch design and programming; (5) Electronic test equipment (volt meters, amp meters, or oscilloscopes); and (6) BACnet and Modbus protocols. Telecommuting: No Telecommuting Allowed. Applicants who are interested in this position should apply to Careers | Bosch Building Technologies | Building Technologies, search (Software Engineer II 9036780)

Job Description T&M Associates is seeking an Electrical Engineer/Designer with 3-5 years of experience to join our MEP team in New Jersey. The ideal candidate will have experience contributing to the design of electrical systems for commercial, institutional, and residential facilities and is looking to continue developing technical skills and project responsibility within a collaborative team environment. Responsibilities: • Support and contribute to the design of electrical systems for commercial, institutional, and residential projects, • Prepare drawings, calculations, and construction documents, • Participate in project meetings and coordinate with project teams, • Perform field surveys and assist with construction administration, • Bachelor’s Degree in Electrical Engineering, • 3–5 years of building electrical systems design experience, • AutoCAD proficiency required; Revit experience preferred, • EIT preferred or on track to obtain T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID #LI-HYBRID

Job Description Senior Structural Engineer We are seeking a Senior Structural Engineer with strong experience in temporary structures, including scaffolding systems, shoring, bracing, and construction support design. This role involves working closely with contractors, project managers, and field teams to develop safe, efficient, and code-compliant solutions for complex construction projects. Responsibilities • Design and analysis of temporary structures including scaffolding, shoring, formwork, and excavation support systems, • Perform structural calculations and prepare detailed drawings and specifications, • Review contractor submittals and provide engineering support during construction, • Conduct site visits to assess conditions and ensure compliance with design intent, • Collaborate with multidisciplinary teams to support project delivery, • Bachelor’s degree in Civil or Structural Engineering, • Professional Engineer (PE) license required, • 8+ years of structural engineering experience with a focus on temporary structures or construction engineering, • Strong knowledge of OSHA regulations and relevant building codes, • Proficiency with structural analysis and design software To apply, submit resume to Joseph P. Durkin Liberty Personnel Services, Inc. 1001 Conshohocken State Rd, Ste 2-410 West Conshohocken, PA 19428 Direct Line: #midsenior #CivilMEP #li-hybrid Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Construction Estimator Opportunity With Private Equity & Venture Capital Backed EV and Retail Operator! Great Compensation Package, Full Benefits, Bonus and Hybrid Flexibility! This Jobot Job is hosted by: Ben Kimbrel Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: We specialize in deploying EV charging infrastructure along major highway corridors. we handle every aspect of our charging stations in-house, from design and development to operations and maintenance, all supported by strong partnerships with top DC fast-charging suppliers. Based in New Jersey, we are committed to expanding nationwide and making sustainable, accessible transportation a reality for all. This is a great opportunity for a construction Estimator or Cost Engineer with 3+ years of experience at an owners rep or a GC and looking to transition to the owners representative side of construction! Why join us? • Health, Dental, Vision and Life insurance, • Remote flexibility, • 401k match, • HSA and FSA plans, • Annual performance based bonuses, • Paid time off and holidays, • Parental leave Job Details Is your background a fit? Apply if you meet this criteria: • 4-Year Degree in Architecture, Construction Management, Engineering, Project Management, or a related discipline, • 3+ years construction procurement management experience (required), • Experience estimating commercial vertical construction, utilities, site work or electrical projects Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Electrical Engineer, Circuit Design We are seeking an Electrical Engineer to design and program electrical systems. • Ability to work within Electrical Engineering’s R&D and Manufacturing teams, you will be designing and developing state-of-the-art digital controllers & control systems, including related software, for operating our specialized equipment., • PLC- Allen Bradley, Rockwell preferred, not required., • The ideal candidate should have the ability to work with test equipment such as oscilloscopes, logic analyzers, and in-circuit emulators., • You will need to possess the ability to work with C, C++. Additional knowledge of languages such as C#, Visual Basic, VBA and Assembler would be a plus, not a requirement, as would be working knowledge of embedded systems, including microprocessors (8 to 32 bit) and support hardware., • Knowledge of industrial data communications protocols would be an asset, although not required., • The ability to read schematics and interpret hardware to facilitate software design is a requirement., • The ideal candidate should have the ability to work with test equipment such as oscilloscopes, logic analyzers, and in-circuit emulators., • Proficiency in AutoCAD, or AutoCAD electrical preferred, electrical design, analysis, and simulation tools, • Panel layout and design preferred, • BOM exposure preferred, not required, • Solid understanding of electronic components and their applications., • Relevant experience in electrical engineering, product design, or a related field., • Demonstrated ability to think creatively and contribute to the development of innovative solutions., • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination. Degree in electrical engineering, Industrial Engineering, Mechanical Engineering and/or Computer Science, similar or equivalency years of experience Looking forward to getting to know you... We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Crane Aerospace and Electronics has an exciting opportunity for a Sr. Manufacturing Engineer Managerat our West Caldwell, NJlocation. About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Every time you use phone navigation, make a bank transaction or have food delivered to your home, Crane Aerospace & Electronics Microwave product is hard at work. Located in the tight-knit, family-first West Caldwell, NJ., community, our West Caldwell facility supplies industry-leading microwave components and systems for use in space, defense and commercial applications, including GPS III satellites. With more than 60 years of expertise, our Microwave group has proven capabilities in major military, communications, electronic warfare, radar and satellite systems. Start the next chapter of your career with Crane Aerospace & Electronics! Job Summary: The Senior Manufacturing Engineer Manager leads the Manufacturing Engineering team, overseeing machining and special process development, CNC and CMM programming, tool and fixture design, and process validation. This role supports Value Stream leadership in productivity improvement, lead time reduction, and New Product Development (NPD) activities, ensuring all customer and internal cost requirements are met or exceeded. Key Responsibilities: • Oversee development and optimization of manufacturing processes including assembly, testing, tooling, fabrication, and SPC while ensuring compliance with company policies, customer requirements, and AS9100 standards., • Drive continuous improvement through setup reduction, visual standard work, cost-reduction initiatives, Value Stream Mapping, and Kaizen activities aligned with Crane Business Systems (CBS)., • Evaluate and approve engineering requests, determining feasibility, make/buy status, and workload priorities; collaborate cross-functionally to ensure cost-effective manufacturing for new and revised products., • Prepare and manage departmental budgets; oversee justification, selection, and acquisition of capital equipment to support operational efficiency., • Support New Product Introduction (NPI) activities through participation in IPTs and ensure successful internal manufacturing readiness., • Provide leadership and guidance to assigned personnel, ensuring adherence to company policies, work rules, and applicable Bargaining Unit Agreements. Minimum Qualifications: * Experience: 8+ years of relevant experience demonstrating expertise in manufacturing engineering and process development. * Knowledge: Strong understanding of continuous improvement tools, raw materials, production processes, quality control, and cost optimization techniques. * Skills: Critical thinking, time management, decision-making, and excellent communication skills; ability to motivate and develop teams effectively. * Education: Bachelor's degree in electrical, Electro-mechanical, Industrial, or Mechanical * Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR). Preferred Qualifications: • Advanced degree (MBA or MS) preferred. Working Conditions: • Working conditions are normal for a manufacturing environment, • Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE, • May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes, • Schedule will fluctuate depending on the needs of the business Standing: up to 100% *percentage is approximate and may vary depending on work task Sitting: up to 100% *percentage is approximate and may vary depending on work task Lifting (in pounds): up to 25 pounds Pushing (in pounds): up to 25 pounds Mental/Visual: use of computer Workspace (line, cube, etc):work bench Top Benefits: As a team member at Crane Aerospace and Electronics, you'll enjoy: * Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month * Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. * 401k Retirement Plan: 401k plan with company match * Education Reimbursement: eligible after 6 months of employment You can see a list of our benefits at or visit our website at for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. Salary range: $185,500.00 to $220,000.00. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

ELECTRICAL ENGINEER/DESIGNER(ASSOC DEGREE, B.Growing equipment company needs someone to design new electrical schematic diagrams from existing OEM ones.Will utilize Solidworks Electrical to design, oversee testing of electrical systems, assisting shop floor personnel in troubleshooting electro-mecha

We’re hiring a Senior Electrical Engineer to play a key role in the full product development lifecycle of commercial-grade equipment, from concept and design through validation, production, and continuous improvement. You’ll partner closely with engineering, sourcing, marketing, sales, and produ

A leading technology infrastructure company is seeking a Principal Electrical Engineer. The ideal candidate has a Bachelor's Degree in Electrical Engineering and over 12 years of relevant experience. You will be responsible for leading designs and managing cross-functional teams to ensure high-quali

About First Environment Headquartered in Butler, New Jersey, First Environment is a veteran-owned, multi-disciplinary environmental consulting and engineering firm. Direct experience with New Jersey Department of Environmental Protection (NJDEP), the United States Army Corps of Engineers (USACE), fe

Associate Producer - The Inception Company.Based out of Fairfield, NJ or Ambler, PA, with event-based travel as needed.The Inception Company provides innovative technology-driven, fully managed event and creative solutions to enhance engagement for key Life Sciences partners.With state-of-the-art st

Anderson Electric Corp is looking to bring on an experienced electrical mechanic due to increased.

Support the creation of functional specifications by collaborating with project team members to confirm that documentation accurately reflects project needs and solution design.

Act as the central coordination point between Client Implementations, Product Engineering Sales Client Success and Operations.

Collaborate with engineering and design teams to implement modifications and improvements. Maintain design documentation and update project databases with revisions. Ability to perform technical calculations and interpret design specifications.

Bachelors Degree in Mechanical Engineering or Chemical Engineering. Determine project specifications by analyzing product design, customer requirements, and performance standards. GEA Group, founded in Germany in 1881, is a global leader in engineering solutions, serving industries such as food and