Electrical design engineer jobs in Deer Park, New YorkCreate job alerts

Job Description Embedded Design Engineer For over sixty years, the Orbit Electronics Group has designed and manufactured customized electronic subsystems and major components for military aircraft, shipboard, handheld, and ground-based programs, as well as designing hardware to support rugged non-military applications. Advanced in-house technologies, proven design expertise and diligent analysis of the relationships between human and machine enable the Orbit Electronics Group to deliver products that increase user productivity, reliability, and overall performance in mission-critical applications. Our products include Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more. Our goal is to ensure Total Customer Satisfaction by providing our customers with the best available equipment and service so they will recognize Orbit as the source for their Human Machine Interface (HMI) needs. Job Description This position primarily involves software/firmware and hardware design as part of the Orbit Electronics Group engineering team. The right candidate should be able to bring an embedded design from concept to completion. • Software/firmware and hardware design and implementation of embedded systems to use in Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more., • Use computer-assisted engineering and design software and equipment to perform assignments, applying principles and techniques of electrical engineering to accomplish goals., • Design of test software and test suite packages including selection of accompanying commercially available test equipment and design of non-standard test equipment., • Participation in preparation of specifications and documentation related to new and legacy designs., • Assist in troubleshooting of new and legacy embedded designs, which include a broad mix of communication protocols. Work with other members of the multi-disciplinary engineering team to bring designs to realization. Requirements US citizenship or permanent residency required Minimum of 2-years’ experience in an embedded systems or software design role Bachelor’s degree in Computer Engineering, Electrical Engineering, or a related field Experience in embedded software development, including firmware design and low-level programming Experience with Schematic Capture and PCB design tools is preferred Experience designing mixed-signal circuits (combining analog and digital components) is preferred Experience writing code in C or C++ is a plus Experience with Real Time Operating Systems is a plus Organized and detail oriented Good interpersonal skills, along with verbal and written communication skills Ability to work in both a team environment and independently Benefits *401K *Health Insurance *Vision and Dental Insurance *Paid Time off (Vacation, Holidays, sick leave etc.) *Flexible Spending Accounts *Tuition Assistance *End of year time off *Opportunities for advancement Salary $70,000 - $80,000 Depending on experience. Schedule Monday – Friday 8:00am – 5:00pm (onsite) Company DescriptionLong Island, NY company founded over fifty years ago as an engineering, manufacturing and consulting firm for power products. Over the past fifty plus years, our company has grown to become a world class provider of the highest quality Standard, Modified Standard, Custom and COTS AC Power Sources, Frequency Converters, Inverters, DC-DC, AC-DC, DC-AC, and Uninterruptible Power Sources (UPS) for commercial, industrial and military mission-critical applications. We have a proven ability to solve any power requirement, and we support our products with personal service that exceeds even your highest expectations.Long Island, NY company founded over fifty years ago as an engineering, manufacturing and consulting firm for power products. Over the past fifty plus years, our company has grown to become a world class provider of the highest quality Standard, Modified Standard, Custom and COTS AC Power Sources, Frequency Converters, Inverters, DC-DC, AC-DC, DC-AC, and Uninterruptible Power Sources (UPS) for commercial, industrial and military mission-critical applications. We have a proven ability to solve any power requirement, and we support our products with personal service that exceeds even your highest expectations.

Job DescriptionDescription: Position Summary: An Automated Systems Engineer is responsible for providing hands-on controls and electrical engineering support to correct, repair, and improve machinery, equipment and systems company-wide. This position is full-time, Monday through Friday, from 8:00AM - 4:00PM. Responsibilities: Responsibilities include, but are not limited to: • Troubleshoot and repair PLC electrical and control related issues., • Design and implement machine changes and improvements, including creating new control systems., • Draft new electrical drawings and modify existing electrical drawings., • Organize and maintain latest machine PLC programs, HMI programs, electrical drawings, and user manuals., • Communicate and work with maintenance and engineering personnel to resolve issues in a timely manner., • Procure parts and materials required for machine maintenance., • Assist in initiation of change control if new parts deviate from original specifications., • Assist in qualification of equipment., • Supervise, mentor, and advise mechanics to ensure machine repairs and operations are conducted in a safe, responsible manner., • Execute engineering support and maintenance to meet all requirements and yield a greater than 90% first time right., • Keep current and implement technology to enhance operation performance., • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect and accountability., • Bachelor’s Degree in Electrical Engineering or equivalent hands-on experience, • Knowledge of controls software (PLC, HMI, and Servo) from Allen-Bradley, Siemens, and Mitsubishi., • Knowledge of drafting software (AutoCAD) preferred., • Knowledge of OSHA and NEC code requirements., • Ability to follow company policies and procedures, including all SOPs., • Computer skills must include Microsoft Office, Word and Outlook., • May be required to lift up to 50 lbs, climb ladders, use tools, and manipulate machine parts., • Required to use hands to use computer controls, demonstrate equipment usage, etc., • Required to be present in-house to provide daily engineering support to multiple departments and management including VPs, directors, managers and to collaborate / mentor other personnel as required., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Indoor manufacturing environment including enclosed areas with dust and loud noises., • Potential to move between production operations sites/areas to complete job functions. $90,000 - $120,000 yearly

Job Description The Senior Building Controls Technician will provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties: * Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents * Ability to program projects with various levels of complexity * Capable of performing network troubleshooting, database troubleshooting and repair programming * Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations * Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems * Maintains accurate and thorough project documentation and redlines * Provides owner training as required by the project * Executes system commissioning and functional testing * Assist in installation of control hardware * Startup and commission new hardware installations * Provide project management assistance on projects as required, interfacing directly to customers * Supervise sub-contractors and suppliers as needed * Help educate lower-level technicians through on the job training as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job DescriptionA multi-discipline engineering firm with over 70 years in business is looking for a Senior Electrical Engineer for their Huntington, New York office! Responsibilities: • Design electrical systems (power distribution, stand-by power generation, lighting, communication, fire alarm, security systems), • Manage team of electrical engineers in a variety of project design and development tasks:, • drawings, • calculations, • cost estimates, • specifications, • client communication, • contractor submittal reviews, • Review design documents, • Ensure department adheres to QA/QC standards, • Assist with developing QA/QC standards, • Assist with business development initiatives, • Mentor/train junior staff Requirements: • B.S. degree in Electrical Engineering from an accredited program, • 5+ years of consulting experience (designing building power, lighting, communication and security systems), • Experience with HVAC and plumbing systems preferred, • PE License, • Extensive knowledge of the architectural/engineering industry (Federal, State, and local laws/regulations), • Experience using Outlook and Microsoft Office (or similar software), • LEED Accreditation, • Working knowledge of AutoCAD, Revit, and Easy Power preferred Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description Full-time career opportunity for a Senior Engineer to design and implement high-performance digital systems using VHDL. This role involves FPGA-based design, validation, troubleshooting, and collaboration with cross-functional teams. Key Responsibilities: • Lead design, development, and optimization of digital circuits/systems using VHDL., • Verify and validate designs through simulations and testing., • Collaborate with architects, hardware, and software teams to define requirements and solutions., • Debug and optimize FPGA hardware/software interactions., • Document design processes and results., • Plan and manage development schedules and resources., • Mentor junior engineers and promote best practices., • Bachelor's or Master's in Electrical/Computer Engineering., • 8–15 years of digital design experience with FPGA projects., • Proficiency in VHDL and FPGA design tools (Xilinx, Altera)., • Experience with PCIe, Ethernet (1G/10G), TSN, and system-level design/verification., • Strong knowledge of FPGA architectures, high-speed design, and DO-254 certification processes., • Excellent problem-solving, communication, and teamwork skills. Well-established, stable company. Long-term projects featuring great technology. They are a great group of people to work with.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Field Construction Coordinator to join our team at K&A Engineering in Ithaca, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Field Support to Resolve Problems – Being Proactive, • Must do Reporting – Weekly Report, Monthly Reports, tracking of weekly PayId’s completed., • Monitor Schedule - Look Ahead vs. PM, • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting., • Maintain and update as needed the onsite H&S, Environment and Quality project binder., • Be organized, and document all project progress to provide a good paper trail, • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting. Request the contractor two week look ahead schedule at each weekly meeting., • Present onsite when work is being performed (make frequent observation of contractor’s activities)., • Immediate notification to PM of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate Material delivery between Customer Stockroom, and Contractor., • Inspect all project related construction material for damage and completeness for the project execution., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Facilitate resolving construction problems, discrepancies, procedures, and methods by working with engineering personnel, inspectors, contractors and suppliers. Must have strong communications skills., • Minimize Change Orders. Support Project Manager to review any requested Change, • Orders/Notices or other claims submitted by Construction Contractors which relate to additional payments, schedule adjustments or other modifications to the Project, and make such recommendations to the PM regarding the legitimacy of such claims and review the, • Construction Contractor’s proposed mitigation., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Maintain a daily on-site as-build project plans., • Continuously communicate (written and verbally) with the associated PM., • Adhere to company policies, programs and procedures as well as Critical Infrastructure, • Protection (CIP). Ensure all requirements are maintained throughout the project execution, • Promote a proactive safety culture by encouraging open communication, reporting unsafe conditions, and suggesting improvements to safety practices., • Minimum of five (5) years’ experience in progressive related electric utility industry experience, with transmission facilities construction management, • Two (2) years of college is preferred, • Construction Project Engineer Background Preferred, • Distribution line work experience required, • MS Suite Required – with high competency in MS Excel, • Knowledge of NRA clearances and switching orders would be beneficial, • Applicants should have the knowledge, experience and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Must have current US Work authorization and valid US Driver License in good standing, • Minimum of 5 years of supervisory capacity experience, • Knowledge of GPS Systems & knowledge of SAP are preferred, • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written and interpersonal communication skills, • Must be able and willing to attend training in E-STAR/CONVEX (switching and tagging). Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Narda MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The RF/microwave Amplifier Design Engineer is an experienced professional with the capability to design discrete transistor and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies. Able to synthesize and develop new amplifier components using CAE analysis tools and has hands-on bench troubleshooting and test skills. The individual effectively communicates with contacts inside and outside of own department, customers, and suppliers. Recommends enhancements to systems and processes. Possesses practical project management skills and will work under general supervision to achieve technical performance while meeting schedule and cost operational targets for specific programs and projects with moderate impact on departmental results. Essential Functions: • Design, develop, test and support production of discrete and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies., • Conceptualize and develop new RF and microwave circuits, packages, and products., • Perform linear and nonlinear circuit simulations of microwave active and passive circuits., • Provide direction on hi-reliability specifications, i.e., the screening and testing for our products to be compliant., • Develop specifications for microwave components and subassemblies., • Generate design review presentations and test reports., • Design for ease of manufacturing., • Estimate and track project schedules and labor for engineering developments., • Bachelor’s Degree in Electrical Engineering and a minimum of 4 years prior relevant experience or a Graduate Degree and a minimum of 2 years prior related experience., • A minimum of 2 years designing and simulating low noise amplifiers., • Experience designing RF/Microwave passive components, e.g., couplers, power dividers and attenuators., • Ability to manage projects and interface to other areas., • Experience designing products for manufacturing., • Proficient in linear CAE and experience with non-linear CAE., • Ability to work under a microscope in a clean room environment to test and tune circuits., • Experienced user of microwave test equipment; including network analyzers, noise figure analyzers, spectrum analyzers, power meters and signal generators., • Familiarity with device semiconductors, such as GaAs and GaN., • Ability to gain Secret Level Security Clearance., • Familiarity with MIL specifications, such as MIL-PRF-38534 and MIL-STD-202., • Hands-on experience testing and aligning fine pitch circuits under a microscope., • Design experience with oscillators, synthesizers, and PIN diode circuits., • Knowledge/application of filter synthesis and design., • System analysis experience comprising both cascade and spur analysis., • Proficient use of Keysight ADS, Keysight RFPro, and/or Ansys HFSS simulation tools., • Perform EM simulations of microwave housings, boards, transitions, and passive circuits., • Use of CAD tools such as AutoDesk Inventor and AutoCAD., • Design/test experience of circuits operating through 26GHz is favored, with operation up through 40GHz further preferred., • Experience with both chip and wire hybrid and PCB surface mount manufacturing methods., • 401k, • Health/Dental/Vision insurance, • Life Insurance, • Paid time off, • Tuition Reimbursement Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionAssociate Electrical Engineer Long Island, NY (Suffolk County) On-site | Full-time | Aerospace, Defense & High-Reliability Electronics • Must be US Citizen or Green Card Holder, • No Visa Candidates If you’re looking for a place where you can grow your technical depth, work alongside seasoned engineers, and see your ideas come to life in real products — this is the place to do it. The Opportunity As an Associate Electrical Engineer, you’ll be part of a collaborative team developing and testing advanced semiconductor and microelectronic products. You’ll gain hands-on exposure to real-world applications — from building and qualifying test systems to supporting product launches and improving reliability across complex assemblies. This is an ideal role for someone with a strong technical foundation who wants to bridge theory and practice, working in a lab environment that values curiosity, precision, and continuous learning. What You’ll Do * Design, build, and troubleshoot test setups for new and existing products * Support qualification and production testing of semiconductor and microelectronic devices * Contribute to PCB layout and assembly, test box development, and documentation * Assist in ATE (Automated Test Equipment) integration and code development (C# preferred) * Prepare and maintain test traveler documentation for production runs * Partner closely with production and engineering teams to ensure smooth product transitions from prototype to manufacturing What You Bring * B.S. in Electrical Engineering (BSEE) or equivalent technical background / relevant military training * Foundational knowledge of power electronics and analog/digital circuit design * Ability to analyze and troubleshoot circuits — both theoretically and hands-on * Exposure to C++, embedded code development, or C# test software (a plus, not required) * Eagerness to learn, collaborate, and take ownership in a fast-paced, high-impact environment Why You’ll Love It Here * Work directly with senior engineers and technical leaders who mentor and invest in your growth * See your work directly impact mission-critical systems for aerospace, defense, and medical applications * Be part of a stable, established company with a start-up feel in the lab — where innovation still happens daily

Job Description About Us: At Apogee Lighting, we design and manufacture cutting-edge lighting solutions for commercial and industrial applications. Our team is passionate about innovation, sustainability, and creating high-quality products that illuminate and inspire. Join us and be part of a bright future. Job Summary: We are seeking a motivated and detail-oriented Lighting Engineer to join our engineering team. This position is ideal for experienced professionals looking to apply their skills in product development, testing, and support within the lighting industry. Key Responsibilities: • Assist in the design and development of lighting products and components, • Conduct testing and validation of new designs for performance, safety, and compliance, • Support product documentation including CAD drawings, BOMs, and technical specifications, • Collaborate with cross-functional teams including design, manufacturing, and quality assurance, • Troubleshoot technical issues and provide engineering support for production and field problems, • Participate in continuous improvement initiatives for products and processes, • Bachelor’s degree in Mechanical Engineering, or a related field, • 3-5 years of relevant engineering experience (internships or co-op experience a plus), • Strong CAD skills (e.g., SolidWorks, AutoCAD), • Basic knowledge of LED lighting technologies and electrical components is preferred, • Strong problem-solving skills and attention to detail, • Effective communication and teamwork abilities, • Competitive salary and benefits package, • Opportunities for career development and advancement, • A collaborative and inclusive team environment, • Training and mentorship from experienced engineers To Apply: Please submit your resume and a brief cover letter outlining your interest in the position. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class.

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do * Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers * Build new RF and microwave circuits, components, and products * Perform linear and nonlinear simulations for active and passive circuits * Define specs for microwave components and subassemblies * Support high-reliability testing and screening requirements * Generate design reviews, test reports, and documentation * Work with manufacturing teams to ensure efficient build processes * Estimate project schedules, track engineering labor, and support technical proposals What You Need * Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ * At least 2 years designing and simulating low noise amplifiers * Experience designing passive RF/microwave components (couplers, dividers, attenuators) * Experience designing for manufacturability and managing engineering projects * Proficient with linear CAE tools plus exposure to nonlinear CAE * Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators * Ability to work under a microscope in a cleanroom environment * Familiarity with semiconductor devices like GaAs and GaN * Strong communication skills * Must be able to obtain a Secret-level security clearance Preferred Experience * Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 * Experience aligning and tuning fine-pitch circuits under a microscope * Knowledge of oscillator, synthesizer, PIN-diode, and filter design * System-level cascade and spur analysis * Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools * CAD familiarity: AutoCAD, Inventor * Design/test experience up to 26 GHz or higher (40 GHz preferred) * Hybrid chip-and-wire and PCB SMT manufacturing exposure * Wire bonding experience

RF Design Engineer to join our Engineering team. Position: Senior Engineer – RF Electrical Engineer Company: NAPCO Security Technologies, Inc. This Senior Engineering position involves the design of sub-GHz RF Transmitters, Receivers, Transceivers and Antennas utilizing RF SoC products such as TI

One of our clients, a major electronics manufacturer is looking for a talented RELIABILITY ENGINEER Permanent position with excellent compensation package and benefits. Salary range is 100 - 117K Location: Metro NY area (onsite) ** Must be authorized to work for ANY employer in US Sorry, No H1B candidates Please read the description below and to be considered immediately email your resume to barryr @brainsworkgroup.com RELIABILITY ENGINEER QUALIFICATIONS: 3+ years experience as a Reliability Engineer in Electronics or equivalent industry. Familiarity with common industry standards including JEDEC, MIL-STD-883, MIL-STD-202 and AEC-Q. Experience with Reliability Qualification by Similarity. Experience with Environmental, Mechanical and ESD stresses. Understanding of failure analysis techniques including Scanning Acoustic Microscopy (SEM), Radiographic Inspection (X-Ray), Cross-Section methods. Familiarity with MTTF, MTBF Calculations. Experience with Reliability prediction modeling and tools like Weibull++ (or equivalent reliability software) Experience with Data analysis tools including Advanced Excel, JMP, Minitab. Ability to analyze component performance data in reliability tests, including large variety of test parts and multiple design variations. Experience with Design of Experiments, FMEA, product design reviews and DFM. SKILLS: Participate in the product development meetings and guide the team to develop reliable products that meet internal specifications and customer requirements. Develop qualification plans for new products, primarily MMICs but also support other product lines including but not limited to Low Temperature Co-Fired Ceramics, PCBA products, RF accessories and Core & Wire Products. Analyze new products for similarity with existing released products in terms of package, die process and design to determine Qualification by Similarity, thus streamlining qualification testing. Design and execute both device level and package level qualification tests including but not limited to MSL pre-conditioning, Thermal cycling, UHAST, HTSL, ESD and Life Tests. Define ESD Human Body Model (HBM) and Charged Device Model (CDM) tests as per JEDEC standards. Collaborate with Engineering Test Teams to execute Accelerate Life Tests, High Temperature Operating Life Test. Execute Mechanical stresses such as Vibration, Mechanical Shock, Constant Acceleration & Bend Testing. Co-ordinate with external labs for outsourced tests. Review RF Test data before and after stresses to analyze changes is performance. Collaborate with Failure Analysis teams to understand the root cause of failures. Identify and record any non-conformities. Monitor solution implementations to verify effectiveness of corrective actions. Present Qualification results with all relevant stakeholders to help Design teams initiate changes to improve reliability performance. Interface with customers and suppliers on product reliability and with suppliers to purchase lab equipment. Support reliability assessments originating from production of released products or customer returns. Promotes ISO9001/AS9100 Quality. BS in Mechanical Engineering, Electrical Engineering, Materials, Reliability, Industrial Engineering or Physics. Advanced degree preferred. Use this link to apply directly: Or email: Check ALL our Jobs:

Senior Electrical Engineer Summary We are seeking a highly motivated and seasoned Senior Electrical Engineer to join our client's team. The ideal candidate possesses an in-depth knowledge of power system design and a solid foundation in electrical engineering principles. Technical Knowledge: In-dept

Mechanical Design Engineer (experienced). Lead design and engineering analysis from initial planning through development and testing. BSc or MSc in Electrical Engineering with a focus on power electronics; PhD is a plus.

Lead and participate in design reviews, including Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), and Test Readiness Reviews (TRR), to ensure the spacecraft bus design meets all requirements and is ready for production and testing. A successful track record of planning and directing

Estimating Coordinator – Junior Project Manager Track.No relocation assistance provided.Build your career in construction while staying close to home.This is a great opportunity for someone who wants to grow into a junior project management role over time, while working in a stable, office-based e

Skills and Experience: Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). Job Description: We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis

Collaborate with architects, clients, and other engineering disciplines to integrate HVAC and MEP systems seamlessly into building designs. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and p

Skills and Experience: Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). Job Description: We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, a

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Integrated Construction, Design and Technology Solutions”. Bachelor’s degree in Construction Management, En

Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance—and the proven ability to r

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Integrated Construction, Design and Technology Solutions”. Bachelor’s degree in Construction Management, En

Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance—an

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Integrated Construction, Design and Technology Solutions”. Bachelor’s Degree in Construction Management, En

Skills and Experience: Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). Job Description: We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis

Be proficient in completing Cx Design reviews including OPR, BOD, Plans and Specification, submittals and shop drawings. Possess a high-level understanding of engineering knowledge specifically in the built environment. Professional Engineering License is a plus.

Bachelor's Degree in Mechanical Engineering, Master's Degree a plus * Professional Engineering (PE) license required * Min 12 years of industry experience * Proven track record of managing and designing multiple projects at the same time and meet deadlines * Knowledge of NYS / NYC / International Bu

Skills and Experience: Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from c

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. We are proud to be known as an "Integrated Construction, Design and Technology Solutions" firm and we have deli

Troubleshoots electrical wiring and components. Residential electrical experience preferred but not required. Ability to use appropriate tools and diagnostic equipment to repair, install, replace, and test PV related electrical circuits and associated equipment.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. We are proud to be known as an "Integrated Construction, Design and Technology Solutions" firm and we have deli

The work includes electrical design to support for new building construction and renovation projects, as well as lighting, utility and distributed energy projects. Mechanical Electrical Plumbing Department.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Minimum 20+ years of successful construction project management experience with emphasis on major healthcare pr

The energy management team is committed to enhancing the bottom line by effectively managing energy, water and waste through design and operation of our facilities. The Eastern region is supported by a single energy engineer who will focus on the 5 major sites within this region. The Eastern Region

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. We are proud to be known as an "Integrated Construction, Design and Technology Solutions" firm and we have deli

BS Degree in an applicable engineering or engineering technology field or a BA Degree in Business Administration or similar with a strong technical mindset and applicable experience. Learn in-house software to provide assistance, or in some cases, to perform customer design and quoting. Role will be

Stay updated on industry trends, advancement, and best practices in HVAC design and engineering. This role as Senior Mechanical Engineer will be focused on a mix of project types, everything from critical environment healthcare designs to energy performance work and large public infrastructure proje

We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Integrated Construction, Design and Technology Solutions". BS degree in a technical discipline such as Eng

Diagnose errors across mechanical, electrical, and fluid power systems. Test electrical systems and circuits using meters and other diagnostic tools to ensure safe and proper operation. Install, maintain, and troubleshoot electrical systems in compliance with the.

Working under minimal supervision, the skilled trades Electrician Journeyperson is responsible for layout, installation, repair and preventative maintenance of complicated electrical equipment and circuits, troubleshooting and technical expertise on control systems. Responsible for the maintenance a

We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Integrated Construction, Design and Technology Solutions". Bachelor's Degree in Construction Management, E

This role is responsible for electrical installation, troubleshooting, and maintenance in a complex commercial and industrial environment.

Disassembles defective electrical equipment, replaces defective or worn parts, and reassembles equipment. Some electrical knowledge helpful.

We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with pro

Proven expertise in diagnosing and fixing electrical issues in residential settings. Reimer Home Services is seeking a Residential Service Electrician to join our trusted team and deliver top-tier electrical solutions to homeowners across Upstate New York. With a legacy dating back to 1921, Reimer h

We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. How you will impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide r