Electrical designer jobs in Inglewood, CaliforniaCreate job alerts

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Engineer I to our Digital and Mixed-Signal Electronics team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior level, you will be tasked with full-stack hardware development for complex modules. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of electronics modules, from concept and architecture through schematic, layout, test, and production, • Own the digital and mixed-signal portions of complex RF electronics, such as phased array control circuitry, • Design circuits with FPGAs, processors, microcontrollers, and other complex programmable targets, • Design mixed-signal electronics ranging from software-defined radios to telemetry subsystems, • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives, • Perform detailed PCB layout in Altium Designer for complex boards, sometimes working with a PCB Designer, • Complete analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, • Develop bring-up plans and design verification plans for new electronics modules, • Perform bring-up and key verification testing of modules, often working with a technician to complete validation, • Release modules to production, working with the Manufacturing and Test Engineering teams, • Mentor junior engineers to build technical understanding and professional development, • Use working knowledge of adjacent fields, such as software and mechanical, to streamline development of electronics modulesJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 4 years of industry or university research experience in board-level electronics design, analysis, and test., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Experience owning the design phase of circuits or boards, including trade studies, key part selection, and detailed design., • Experience delivering subcircuit or board designs to production and deployment., • Experience performing complex PCB layout, such as high-density interconnect (HDI) and high-speed digital or power electronics., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Working knowledge of adjacent fields, such as software and mechanical., • Proficiency in electronics design tools such as Altium., • Strong lab experience for bring-up and verification of new hardware., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE

Job DescriptionDescriptionAs a Senior Avionics Electrical Engineer, you will design and test custom circuit boards and other avionics devices, mentor less experienced engineers, set high standards, and guide the technical direction of the avionics team. You will work directly with software engineers, propulsion engineers, GNC engineers, and others. You will have the opportunity to contribute to all aspects of spacecraft electronics development, from architecting new systems to building and operating them. Responsibilities • Contribute to new spacecraft avionics architecture trades, • Develop circuit boards for spacecraft, with an emphasis on digital electronics, • Perform rigorous analyses and simulations of avionics devices and systems, • Perform development testing of hardware in the lab, from a single circuit board to an entire system including non-avionics elements, • Own hardware through qualification and flight operations, • Bachelor’s degree in Electrical Engineering or related field, • 4+ years professional experience designing digital electronics for rockets, spacecraft, or other vehicles, • Proficiency with electronics component selection, analysis, simulation, schematics, and layout, • Knowledge of digital circuit design concepts including signal integrity, timing, etc., • Experience troubleshooting electronics problems at the board level or system level, • Desire to improve team processes and train other team members, • Master’s degree in Electrical Engineering or related field, • Experience with Altium Designer, • Experience doing new development work for any of the following: processors, FPGAs, DSPs, cameras, ethernet switches, or any other specialized area relevant to spacecraft or rockets, • Experience designing high speed digital interfaces such as DDR4/5, PCIe, RGMII/SGMII, Ethernet, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description ICT Designer Downtown Los Angeles, CA Direct Hire/ Permanent Placement $80k – $140k, Bonuses, Full benefits (med, dent, vision), Hybrid, 401k match THE CLIENT This particular client is a mid-sized firm who work on large-scale, complex building systems in the Sports, Education, Retail and Commercial sectors. OVERVIEW The ideal Candidate will be experienced designing and specifying building technology systems like data cabling, IP phone, servers/ storage, security cameras, intrusion detection, access control. ROLE/ RESPONSIBILITIES AND REQUIRED/ HIGHLY PREFERRED SKILLS/ EXPERIENCE • Technology systems background with an emphasis on the following: audio/ video systems, security systems, WAN, LAN and WLAN systems, SAN/ Server/ firewalls, phone systems, public address systems, copper and fiber network cabling., • AS or BS in IT, Electrical engineering, Computer Science, Architectural Engineering, or similar, • 3+ years of US experience post degree, • AutoCAD and/ or Revit experience, • Client/ site visits and Project Management responsibilities, • CTS, RCDD or other industry credentials (preferred but not required)

Job Description ICT Designer HED is looking to add a talented person to our ICT team. The person filling this position will be responsible designing ICT systems for complex Mission Critical projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The ICT Designer builds on foundational design knowledge to contribute to the execution of complex low-voltage and technology infrastructure projects. This role emphasizes developing expertise in systems such as structured cabling, AV, and security while deepening coordination capabilities and technical acumen. Working under the guidance of senior designers and engineers, this individual begins to take ownership of portions of technology packages and demonstrates initiative in problem-solving, design coordination, and client communication. Essential Functions: • Model ICT system components in Revit including pathways, outlets, equipment, and devices based on code, client requirements, and engineering guidance., • Assist in developing project documentation including floor plans, riser diagrams, and device schedules., • Perform basic calculations for conduit fill, cabling distances, and equipment loads with limited oversight., • Collaborate with project engineers and architects to coordinate technology system layouts with building design., • Contribute to redline markups and assist in delegating documentation tasks., • Participate in QA/QC reviews and resolve technical or graphical issues in documentation., • Review and edit specifications under the guidance of project engineers., • Attend project meetings and site visits to support coordination and client interaction., • Manage assigned project hours and report progress to team leads., • Engage in HED’s Design Work Planning (DWP) process and estimate time required for task completion.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2+ years of experience in technology infrastructure design or a related AEC discipline., • Proficient in Revit; experience with AutoCAD, Bluebeam, and Microsoft Office., • Familiarity with standards such as BICSI, EIA/TIA, and NEC., • Strong organizational and communication skills., • Self-motivated with a collaborative mindset and enthusiasm for innovation.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.

Job Description SitelogIQ Commercial Markets delivers turnkey energy efficiency and property improvement programs that transform built environments and breathe life into the sustainability, financial, and ESG goals of real estate teams and corporations across the U.S. Our mission is to make it easy for our clients to accelerate progress and ensure their facilities are healthy, optimized, and exceed the needs of their occupants. The Electrical Designer Level II will work out of our Commercial Markets Division. is responsible for the assembly of design layouts, specifications, and drawing sets needed to support the sales, engineering and development, and construction departments. Daily components of this role include drafting, product specification, product research, and the preparation of proposal, design and engineering, and construction resource documents. An effective SitelogIQ Designer will need to collaborate with team members to build positive working relationships, analyze and resolve solution design and assembly issues expediently, collaborate with peers to meet deadlines and identify supplier, contractor, and internal resources to successfully complete project development deliverables. A successful SitelogIQ employee will share knowledge with others by serving as a constant contributor, trainer, mentor, and resource. Target Salary: $80,000 - $95,000+ depending on experience Electrical Designer Level II Responsibilities: • Assist Sales to determine customers’ specific technical requirements, project scope, definition of work and product/system feature, • With a focus on electrical design, primarily to support EV charging applications., • Conduct and/or perform the following activities and tasks:, • Prepare drawing packages which contain Electrical, Civil & Structural drawings., • Communicate to third parties to assemble drawing packages., • Understand the requirements for Civil & Structural designs and drawings where applicable., • Apply knowledge of building codes, including NEC, ADA, and local codes., • Coordinate with utilities., • Participate in site-surveys, pre-bid and pre-construction meetings as needed, including single line diagrams, schematics, wiring diagrams, and other drawings as required by project scope., • Create drawings needed for engineering and development, proposals, and construction., • Generate submittal packages (product data sheets; bill of materials; drawings, including layout and detail drawings, permit sets, )., • Maintain all internal documentation in a collaborative file sharing and storage environment., • Assist in large RFP and business development opportunities which will include creation of detailed submittal, • Participate in quality control review of peer project development team, • Technical or Bachelor degree in electrical related field, • 2+ years of relevant drafting design and detailing experience with EV Charging a plus, • Experience with AutoCAD, Bluebeam or an equivalent, • Experience understanding audit and field survey data and translating that into design documents and drawings., • Proficiency with Microsoft Office products such as Word, Excel, Outlook, etc. Benefits We offer a highly competitive salary, and comprehensive benefits, including: • Medical, dental, and vision insurance, • Disability and life insurance, • 401K, • Flex time off, • 12 paid holidays, • Tuition reimbursement, • Opportunities to drive our DE&I efforts by joining our affinity groups, Veterans and Allies Leadership Organization, or Women Inspiring & Strengthening Everyone At SitelogIQ, we’re focused on creating a great environment for our team first so that it is more energizing and rewarding to focus on creating a great customer experience. That’s what we call a win-win. We partner with clients in K-12, higher ed, government, healthcare, multifamily housing, and industry to optimize energy efficiency, improve indoor air quality, address lighting, and improve the customer experience. With offices across the country, it’s rewarding to make a difference in the communities where our teammates live and work. SitelogIQ is an Equal Opportunity Employer and participates in the E-Verify program. #LI-MB1

Job Description Essential Duties: The following is a list of the primary tasks of the Construction Superintendent, some of which may be delegated to jobsite personnel, but which require his or her close supervision: • Safety - The primary responsibility for job safety rests with the Superintendent. Ensure safety is properly incorporated into job planning and execution; promote accountability among staff members and subcontractors as it relates to the project safety policies; and enforce these policies by actively participating in all safety-related functions., • Quality – The Superintendent is responsible for all quality control on the project, both Company and subcontractors. Any repetitive quality problems with a subcontractor or vendor should be called to upper management's attention. The Company has a policy and past record of providing high quality work and this high-quality standard is to be maintained on each project., • Job Planning - Development and implementation of the pre-job plan. Make course corrections to the plan as required. Create material handling and site utilization plans., • Scheduling - Participate in the project scheduling to the extent necessary to ensure that it is "their schedule " and that it complies with the job planning., • Mobilization - Complete specific tasks as assigned in pre-job planning sessions., • Coordinate and supervise all Company work forces on the project including employment of laborers and craft persons. The Superintendent has the authority to hire and fire all hourly paid personnel under his or her direct supervision. This also includes the indoctrination of Foreman and holding them accountable., • Develop Assistant Superintendents, Coordinators, Engineers, Foremen and craft persons., • Personnel evaluation, development, and retention. The Superintendent will be consulted in the assignment of salaried staff. They are responsible for defining what is expected of (goal setting), providing feedback to, and evaluating salaried personnel under his or her direction. They are to recommend promotion, transfers, or termination according to the project's needs and personnel evaluations., • Coordinate and schedule all subcontractors – Hold weekly scheduling meetings with all subcontractors' Foremen., • Develop forms detailing and special construction methods for job efficiency., • Maintain accurate time keeping and cost records., • Study labor recaps and cost controls carefully to determine areas needing special attention and initiate changes and procedures to bring costs back into budget., • Expedite vendors and subcontractors on a daily and weekly basis., • Material Receiving - Be sure that material received is properly inspected for quantity and quality, and that the receiving tickets are properly signed and coded and submitted., • Equipment - Equipment needs should be reviewed with their supervisor., • Owner Relations – Participate in the Owner/Architect/Contractor meetings. Along with the Project Manager, ensure Owner and Owner's Representatives are aware of changes to schedule, potential conflicts, etc., • Be sensitive to special requirements of the customer or neighbors to ensure satisfactory relations., • Maintain Project Logs. Physical Work Classification & Demands: • Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects., • The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity., • Walking - The person in this position needs to frequently move about the jobsite., • Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone., • The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration., • Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements., • Climbing – Ascending or descending ladders, stairs, scaffolding and ramps at various heights., • Balancing – Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch., • Stooping – Bending the body downward and forward by the spine at the waist., • Reaching – Extending hand(s) and arm(s) in any direction for various lengths of time., • Grasping – Needs to apply pressure to an object with fingers and palm regularly., • Visual acuity and ability to operate a vehicle as certified and appropriate., • Occasionally exposed to high and low temperatures. Preferred Qualifications: Bachelor's degree in construction management, Engineering, or Business. Professional accreditations, including DBIA, LEED, etc.

Job Description The Mission At GRAM, we believe the next great leap for humanity will be physical, not digital. What AGI is to bits, Self-Replication (SR) is to atoms. As an SR research and deployment company, our mission is to make humanity galactic by enabling physical exponential growth. To achieve this, we are conducting foundational research across general-purpose robotics, artificial intelligence, biology, and materials science to enable SR within our lifetimes. Our first step is to challenge the consensus that robots should look like us. We believe true progress comes from optimizing for function over form. We are creating a new embodiment for intelligence, designed from first principles to build the future physical economy, on and off-world. The Role At GRAM, we are not integrating off-the-shelf components; we are building a novel physical being from the ground up. This role is for the engineers who build the machine itself: the bones, muscles, and nerves of our Insectoid robot. You will be responsible for inventing the core hardware that pushes the boundaries of performance and efficiency, creating a system that is greater than the sum of its parts. This is a unique opportunity to solve fundamental challenges in mechatronics, power density, and biomechanics for a completely new robotic morphology. You will work at the intersection of mechanical design, electronics, and firmware to bring our vision to life, creating the physical foundation upon which all of our advanced AI will run. Key Responsibilities: * Architect the complete electrical system for the robot, including power distribution, high-performance compute, sensing, and actuation. * Design, lay out, and validate complex, high-density PCBs, from the main system processor board to custom motor drivers and sensor breakout boards. * Own the selection, integration, and validation of all electrical components, including processors, FPGAs, sensors, and connectors. * Manage system-level electrical challenges, including power budget, signal integrity, and EMI/EMC compliance and testing. * Collaborate closely with firmware and mechanical teams to define requirements, debug integration issues, and bring up new hardware. About You You are a first-principles thinker who is energized by solving problems that have no playbook. You are drawn to ambitious, long-term missions and want to build technology that fundamentally changes our physical capabilities. You thrive in a high-agency environment where you are given the ownership and resources to tackle core challenges. Basic Qualifications: * MS in Electrical Engineering or a related field with 3+ years of experience designing complex electronic systems for robotics or other high-performance products. * Proficiency in PCB design software (e.g., Altium Designer, KiCad). * Experience with high-speed digital design and layout. * Hands-on experience with board bring-up, testing, and debugging using lab equipment like oscilloscopes and logic analyzers. Preferred Qualifications: * A PhD in a relevant discipline. * Experience designing robotic systems with a large number of actuators, sensors, and complex power distribution networks. * Expertise in power electronics, including BLDC motor driver design. * Familiarity with regulatory and compliance testing (e.g., FCC, CE, UL). * Experience with FPGAs and Verilog/VHDL. Location This is an on-site role at our research lab in El Segundo, California. We offer significant relocation assistance for exceptional candidates. Interview Process After submitting your application, we review your portfolio and any exceptional work you've shipped. If your application demonstrates the caliber we seek, you'll enter our interview process, which is designed for speed and substance. We aim to complete it within one week from start to finish. Compensation Your total compensation reflects both the significance of early-stage equity and competitive market rates. The following is the general framework for all roles at GRAM. • Company-Wide Base Salary Range: $75,000 - $300,000 USD, calibrated to your impact potential, • Equity: Substantial ownership stake befitting founding team members Why Join? We are an early, focused team of scientists and engineers building the system that builds itself. GRAM is funded by leading investors and long-term visionaries. We operate without bureaucracy. Ownership and leadership flow to those who demonstrate exceptional capability, and every team member works directly on our core technology. We are based in El Segundo, the heart of America's industrial future, focused on solving one of the most important problems of our time.

Job Description Electrical Designer - Healthcare Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Healthcare facilities, with knowledge of California building codes, OSHPD/HCAI requirements, and energy efficiency standards. This role also involves collaborating with architects, project managers, and contractors to design, specify, and deliver reliable electrical systems that meet the unique needs of Healthcare environments. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a high-level technical role responsible for driving electrical project delivery and engineering quality across large and complex projects. This individual is an electrical system expert, Revit authority, and go-to mentor within the discipline. They are expected to guide project teams through all design phases, resolve complex coordination challenges, and ensure quality and consistency across documentation. The Electrical Designer serves as a bridge between technical execution and strategic planning and is expected to influence standards, coach team members, and represent the firm in advanced technical discussions with clients and consultants. Essential Functions: • Lead the production and coordination of full electrical design packages for large-scale or highly complex projects., • Standardize Revit workflows across teams and lead development of firmwide modeling resources, families, and templates., • Resolve advanced technical modeling challenges and mentor staff in efficient BIM strategies for electrical systems., • Review and approve project documentation for compliance with code, performance objectives, and client requirements., • Author and edit electrical project narratives, design briefs, and owner-facing documents with minimal oversight., • Integrate multiple complex systems across disciplines; resolve electrical system conflicts with other discipline teams., • Perform advanced electrical system analysis, including lifecycle assessments, decarbonization strategies, and code interpretations., • Lead project lighting simulation or energy modeling coordination to inform electrical system decisions., • Develop and implement firm tools for electrical load calculations, system sizing, and code compliance checking., • Define project design strategies, workflows, and milestone deliverables in collaboration with engineers and project managers., • Independently scope and plan project phases, including resourcing and delegation across disciplines and offices., • Ensure technical delivery aligns with project budgets, schedules, and quality expectations., • Provide cross-project mentorship in system design, QAQC strategies, and advanced documentation techniques., • Guide emerging designers and engineers in technical decision-making and problem-solving approaches., • Develop structured onboarding or training content for new electrical staff or designers., • Model team collaboration and delegate electrical design work strategically to grow others’ confidence and capability., • Lead technical segments of client and consultant meetings related to electrical systems, including design presentations and technical decision-making forums., • Communicate clearly and confidently about technical decisions, trade-offs, and performance metrics with diverse audiences., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Influence client and project partner expectations around technical scope, documentation quality, and system performance., • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Familiarity with California HCAI/OSHPD agency, processes and requirements preferred., • Experience with Kaiser Permanente projects preferred., • 10+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

Job DescriptionThe Propulsion team at Hermeus is seeking a highly skilled and motivated Senior Power Electronics Electrical Engineer. In this role you will be responsible for cradle to grave ownership of the electrical power architecture and components for all new vehicle development at Hermeus in addition to mentoring junior engineers and establishing standards and tools that level up the whole team. This role will be embedded in the propulsion team where you will be working with a cross functional team of electrical and mechanical engineers to architect the power system to provide electrical, fluid and mechanical power to critical vehicle components for supersonic and hypersonic aircraft, with the ultimate goal of enabling hypersonic commercial transport. The ideal candidate will be able to act as the bridge between mechanical and electrical disciplines. In this role you will be responsible for the design of flight hardware in addition to all necessary ground and test equipment. In addition to working on custom designs you will also be responsible for working with vendors to identify commercial off the shelf and custom solutions. Finally, you will be hands on hardware and support the build and test of multiple prototype vehicles as we continually push Hermeus’ capabilities forward. We emphasize a fast paced and iterative build and test environment. If you are looking to broaden your experience and get to try out novel solutions to difficult problems this is the job for you. Minimum Requirements • BS Electrical Engineering or Mechanical/Aerospace with significant industry experience working with development of electrical component & systems, • 5+ years of experience in multiple of the following areas: Battery design, motor controller design, harness design and fabrication, design for high EMI environments and appropriate mitigations, power conditioning, communication hubs/busses, bus converters, and PCB layout, • Demonstrated project experience designing high power (>5kw) electronic components and or distributed systems, • Strong analysis and troubleshooting skills, • Willing to get your hands dirty and turn wrenches (or wield a soldering iron if that is more your speed) Preferred Skills and Experience, • Master’s degree in Electrical, Mechanical, Aerospace Engineering, or a related discipline., • Direct experience working with high-voltage DC systems and components (e.g., batteries, motors, generators)., • Hands-on experience with HV systems, including proper safety procedures and precautions., • Strong working knowledge of aerospace systems engineering practices, including requirements development, verification and validation, component qualification and acceptance testing, system diagramming/modeling, and risk management., • Experience executing hardware test and certification campaigns., • Proficiency with relevant software tools and programming languages such as Python, Capital Harness, Siemens NX/Teamcenter, and Altium Designer., • Experience with simulation and test tools (e.g., Fluke process meters, ammeters, Simulink, ANSYS)., • Familiarity with industry standards such as IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, and DO-160G., • Experience working with avionics devices and communication protocols (CAN bus, RS-422, ARINC 825) and connectors (e.g., D38999)., • Strong ability to collaborate across mechanical and electrical engineering domains.

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. Hermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighterResponsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Senior Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an Avionics Electrical Engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 5+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness designPreferred Skills and Experience:, • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Strong analysis and troubleshooting skills, • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experience Additional Requirements: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescriptionAs a Senior Avionics Test Engineer, you will develop and run tests for all kinds of flight electrical devices, from individual circuit boards to entire vehicles. You will develop, build, and maintain test systems to support hardware from development to production. You will work directly with avionics hardware engineers, propulsion engineers, GNC engineers, production engineers, production technicians, and others. You will have the opportunity to contribute to all the stages of spacecraft development, from initial concepts to on-orbit operations. Responsibilities • Develop end-to-end test systems that validate flight electrical hardware including circuit boards, optical devices, and electromechanical assemblies, • Own the setup, operation, and troubleshooting of electrical test equipment and ground support hardware, • Develop automated testing solutions to collect, analyze, and document test data, • Build and maintain test systems, racks, and setups for component level and integrated testbeds, • Provide feedback to design engineers to improve Impulse’s overall avionics ecosystem., • Collaborate with avionics, propulsion, GNC, software, and integration engineers to verify complete test coverage of existing and new test systems., • Bachelor’s degree in any relevant engineering field, • 5+ years of demonstrated experience testing electrical systems, • Proficiency in circuit board design using Altium Designer, • Experience designing and owning test systems from concept to implementation, • Experience executing tests to support product development and prototyping, • Comfortable working with design engineers to anticipate and derive test requirements for under-defined systems, • 5+ years of demonstrated experience working on a vehicle project of any kind (spacecraft, rocket, car, boat, plane, drone, etc.), • Experience designing test stands and/or hardware racks, • Experience designing tests for a production environment, • Experience working with NI hardware (cRIO, cDAQ etc.), • Experience safely operating hazardous systems (high voltage, high pressure, etc.), • Experience with vibe tables, thermal chambers, or other aerospace test equipment, • Familiarity with spacecraft systems and test campaigns Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern computing and autonomy. This approach has been validated through design, build, and test of the company’s first combined turbojet-ramjet engine and is now being scaled through its first flight vehicle program, Quarterhorse. Hermeus is also developing Darkhorse — an uncrewed hypersonic aircraft designed to deliver unique asymmetric capabilities to the warfighter Responsibilities: • You will shape the future of commercial supersonic and hypersonic flight. Our team is responsible for the design, testing, and integration of GNC systems, electrical hardware, control software, power distribution, and RF communications., • The Electrical Engineer position requires system-level architects who are also experts in their specialized areas., • As an avionics electrical engineer, you'll take charge of designing and testing custom electrical systems for both ground test and flight applications., • You will ensure the seamless integration and compatibility of your designs at the sub-system and integrated system level., • As a member of the avionics team, you'll have the opportunity to work across disciplines to create control and instrumentation systems for engine, structural, hydraulic, and electrical systems. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 1+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness design Preferred Skills and Experience:, • Master's degree in Electrical, Mechanical, Aerospace Engineering or similar disciplines, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • Strong analysis and troubleshooting skills, • A bias towards action, and a willingness to work hands-on to make it happen, • Engineering project team experienceAdditional Requirements:

Job Description K2 Space is building large, high-powered spacecraft for the next generation of space development. Backed by Lightspeed Venture Partners, Altimeter Capital, and many others ($200M raised to date), we intend to mass produce the highest-powered satellite platforms ever built for missions across LEO to Deep Space. The rise of launch vehicles like Falcon 9 and Starship enables the move from an era of mass constraint to one of mass abundance. We believe this new era requires spacecraft with a fundamentally different design in order to fully utilize the massive rockets coming to market. We're a team that believes the future lies in building large, high-powered satellites that can handle multiple orbits. This is a necessity if we ever want to develop the solar system, and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series B space startup, we'd love for you to apply. The Role You'll work closely with Electrical Engineers to design critical electronics across all K2 Space satellites, ranging from kW-scale power converters to high-performance flight computers. You'll be responsible for driving the creation of foundational engineering processes for electrical design, including design for manufacture (DFM), design for test (DFT), and library management. In your first six months, you will complete design of your first PCBAs to be tested and integrated in flight hardware. In your first year you will expand your work to develop the tools to support multiple flight designs. In your first two years you will have flown your electronics in space and developed processes that inform K2 Space designs for novel satellite architectures. Responsibilities • Serve as the subject matter expert for PCB layout and design stack-ups for power, analog, digital, and RF printed circuit boards, • Develop library part creation and maintenance best practices, • Bachelor's degree in engineering AND/OR 10+ years of professional experience in PCB Layout, • Experience with Altium Designer, • Experience with relevant industry standards and specifications such as IPC-6012 and J-STD-001, • Expertise in full-cycle PCB design and manufacture, floor planning, power integrity, signal integrity, material selection, and through-hole and surface mount assembly techniques, • Experience with high-speed digital layout of microprocessor, FPGA, and DRAM designs, impedance control, and transmission lines, • Experience with kW scale power converter PCB layout, including both isolated and non-isolated topologies, • Experience with high voltage design, multi-gigabit SerDes design and clock distribution, • Familiarity with standard interfaces such as Ethernet, SPI, I2C, and PCIe, • Experience with EMC and EMI mitigation, • Experience with high-density BGA fanout and routing, • Experience with PCB array design and manufacturing documentation, • Base salary range for this role is $150,000 - $200,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionBenefits: • Paid Holidays, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Note: Construction Schedulers with less experience may be needed in the near future. Candidates are welcome to contact Pacific Pros for consideration for the upcoming opportunities. Work Location: LAWA has required the candidates be local for this position. Region: Los Angeles, CA Status: Full-time on-site. Opening: Winter 2024, Immediate Position Description Summary Participate as integral member of an owners program and project controls team, being directly responsible for scheduling multiple, interdependent projects of a large scale ($100m+ in value). Work collaboratively with other elements of the owners team, including project managers, construction managers, other controls discipline leads, and claims staff to monitor, report on, and negotiate issues on assigned projects. Review designer and contractor submitted schedules and perform analysis as needed. Provide owner with objective assessments of schedule delays (using Time Impact Analysis or other means), present summary and detailed findings to owner and/or third parties as needed. Engage in direct discussions with contractor, as needed, to understand basis of delay claims and support owners understanding of potential liabilities for the negotiation of appropriate settlements. Essential Job Duties for this position The duties for this position include, but are not limited to, the following: • Review Contractors Baseline Construction Schedule for conformance with the Plans and Specification to ensuring proper WBS breakdown, sequencing, critical path and logic ties, and inclusion of all activities, resource loading, etc. necessary for approval., • Perform and coordinate constructability review on Contractors Baseline Schedule submittal and identify any missing activities, float sequestering or suppression techniques/issues or any other conflicts or shortcomings., • Ensure that project WBS are properly coded and resource loaded., • Provide written evaluation, comments and responses on Baseline Schedule submittal., • Review Contractors Monthly Schedule updates in conformance with the plans and specification and identifying any logic changes or inaccurate progress reporting, critical path changes or other pertinent items necessary., • Identify variations from the plan and analyses and report on the cause of the variations., • Review construction progress and inspection reports and maintain an accurate as built schedule for use during construction and for evaluation of Contractors Monthly Schedule updates and any Time Impact Analysis (TIA) submittal., • Attend weekly construction meeting and monitor 3 Week Look Ahead Schedules for accuracy and identify any inconsistency with Baseline/Schedule updates. Promptly reporting schedule slippage, other unsatisfactory performance or other variances., • Identify any critical path changes or near critical path changes that could impact individual phase, milestones or project duration., • Provide written response and approval recommendation submittal response., • Coordinate schedule comments and corrections with Contractors., • Schedule deficiencies., • Maintain a Owner shadow Schedule identifying actual construction activities dates from various sources including daily inspection and quality control reports, site visits, etc. Project and identify potential delays or schedule adjustments based upon Owner Schedule and utilize to assist in evaluating the Contractors Monthly Schedule updates., • Review Time Impact Analysis (TIA) submitted by the Contractor and provide written responses, evaluation and recommendation for time extension as appropriate. Identify schedule variances and opportunities and proactively develop mitigation strategies for the Project Management team., • Provide LAWA What if schedule impacts for contemplated additional work, potential re-sequencing of phases or construction activities. Evaluate, and forecast project status against an established baseline schedule. Assess the impact of project milestones and report status to Management in order to mitigate project overruns and schedule slippage., • Provides direct scheduling related support on multiple projects on reporting to multiple Project Managers., • May require monthly support for projects in Planning or Design along with supporting Construction projects within a Master Program Schedule Plan and would report to the Airside Element Management Team., • May be required to maintain master schedule system to track project interfaces for time frame impacts to electrical airfield systems, mechanical systems, airfield operations and other aviation related disciplines and projects., • Provides development and analysis of man-hour resources, equipment resources and cost loaded, time-phased schedules., • Prepare detailed plans; time scaled charts, diagrams and tracking various quantities to measure construction performance., • Maintain simplified logic schedules to highlight status of key interfaces for critical path review., • Provide progress reporting documents and briefing materials as required. Develop creative reporting tools to communicate complex project sequencing and/or progress assessments., • Participate and review with third-party schedulers to address and provide written comments., • Analyze and assess project milestones and reports the fiscal impact and risk to Management., • Contribute to the advancement of PDGs goals through commitment to productive collaboration with all stakeholders and in development of planning and design schedules., • Support overlapping project scheduling tasks, issue management, meeting facilitation, document control and monthly status reporting to the Project Management Team.Hardware/Software Knowledge, • Mastery of Oracle Primavera P6 Version 8.3 or higher., • Experience with Microsoft Office Suite software Word, Excel, PowerPoint, and Outlook., • Knowledge of Prolog and other Project Management Systems is preferred., • Experience with Adobe Acrobat., • Knowledgeable of presenting graphical data as related to scheduling., • Use of other related software tools such as Schedule Analyzer, MS Project, Claim Digger, etc.Required Qualifications, • US Employment Authorization without needing sponsorship, • See Education/Training requirements, • Excellent written and oral communication skills, • A valid Drivers License and compliance with PACIFICs Vehicle Policy, • Proficiency with common Microsoft Office Applications (Word, Excel, PowerPoint and Outlook), SharePoint and Adobe Acrobat (PDF files), • 3+ References from Clients, • 10 years or more of scheduling experience with 5+ years in direct support of an active construction project, • Demonstrated experience scheduling the design and construction of large-scale, complex projects including developing and managing a progress reporting methodology for multi-million-dollar construction projects within the range of $30M $150M., • Requires knowledge and experience of Project Management principles and Project Control Cycles., • Must be capable of reporting earned value performance measurement techniques., • Understanding of critical path method (CPM) scheduling techniques and principles, including ability to handle and prioritize multiple projects concurrently., • Must be able to track field progress weekly in reporting Contractors performance., • Developed reporting tools to communicate complex project sequencing and/or progress assessments., • Worked in a master schedule/sub project system environment including programs in determining progress impacts., • Must possess capability to report on all levels of project schedules, quality, monitor project progress, risk and ensure project milestones are met., • Demonstrated experience in working and reviewing third-party design and/or construction schedules and addressing comments., • Must clearly and concisely be capable of presenting project trends, risks and forecast performance reports to management and to make recommendations on strategies and mitigation measures to resolve project issues is required., • Demonstrated experience in progress reporting documents and ability to understand a demanding, technical and complicated construction program plus the ability to communicate progress and issues both verbally and written communications on technical and non-technical matters for various levels of management., • Demonstrated success on the job, as evidenced by satisfactory performance, acceptance of responsibility, and growth in previous position(s)., • Must possess the ability to effectively interact with various departments to maintain open lines of communication., • Proven accuracy, reliability and completeness in job accomplishment., • Self-starter with results-driven focus and ability to work with others.Education/Training, • A Bachelors degree in Engineering, Construction Management or related field is preferred.Registration/Certification, • Planning and Scheduling Professional (PSP) certification is preferred.Element-Specific Requirements/Notes, • Aviation experience preferred., • May assume other duties as required/needed, • Maybe required to work past regular work shift, • Maybe required to work various shifts as needed, • This position offers a hybrid/telework schedule per LAWAs current Pilot Telework Policy for details; however, LAWA has required the candidates be local for this position.

Job Description ICT Designer HED is looking to add a talented person to our ICT team. The person filling this position will be responsible designing ICT systems for complex projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The ICT Designer is a trusted contributor with advanced technical experience in low-voltage and communication systems. This role combines deep design execution with growing project leadership responsibilities. Operating with a high degree of autonomy, the ICT Designer contributes to project delivery, leads coordination efforts, mentors junior staff, and supports the refinement of internal standards and best practices across the discipline. Essential Functions • Lead the development of mid to large-scale ICT design packages including floor plans, riser diagrams, and device layouts in Revit., • Independently create and manage Revit families, system templates, and modeling workflows for ICT., • Ensure alignment of documentation with applicable codes, client standards, and project specifications., • Perform advanced calculations related to cable routing, backbone sizing, and equipment loads., • Oversee QAQC of deliverables and provide technical guidance to junior team members., • Lead internal and cross-discipline coordination meetings and resolve design conflicts., • Edit and generate technical narratives, basis of design documents, and specifications., • Participate in construction administration including field surveys, submittal reviews, and RFI responses., • Estimate and manage time budgets for own work and delegated tasks; monitor progress against DWP plans., • Train team members in ICT design standards, tools, and workflows, and contribute to knowledge sharing within the discipline.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2-5 years of experience in technology infrastructure or low-voltage systems design in the AEC industry., • Proficient in Revit and experienced with AutoCAD, Bluebeam, and Office Suite., • Strong understanding of BICSI standards and telecommunications codes such as NEC, EIA/TIA, and NFPA., • Ability to lead technical portions of meetings and mentor junior staff., • Demonstrated organizational, problem-solving, and leadership skills.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Power Electronics Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge power electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior level, you will be tasked with full-stack power electronics development. You will have the opportunity to start at concept development and progress through detailed design, analysis, board layout, testing, and delivery, doing hands-on work at each phase. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of power converters, and power management and control circuits, from concept and architecture definition to schematic, printed circuit board (PCB) design, testing, qualification, production transition and production support., • Perform detailed and complete schematic design for low to high complexity power electronics designs , ranging from single power converters to mukti-output power supply modules and power management circuitry., • Perform detailed PCB layout in Altium Designer independently or in collaboration with a PCB Drafter., • Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis, stress analysis, small signal and stability analysis, power loss and efficiency optimization analysis, and power integrity analysis., • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs., • Perform bring-up and design verification testing of power electronics circuits and modules, often working with a technician or junior engineer to complete design verification., • Collaborate with multi-discipline engineering team and lead system integration and qualification campaigns, and release analog and power electronics designs to production., • Mentor junior engineers to build technical understanding and foster professional development of team., • Perform research and keep up with new power electronics technology and industry trends to drive innovation and generation of intellectual property.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 6 years of industry or university research experience in board-level power electronics design, analysis, and test., • Experience owning the design phase of power electronics or power subsystems, including power architecture and requirements definition, trade studies, power converter and analog electronics design, component selection, and detailed design., • Experience performing or guiding complex PCB layout for analog and power electronics., • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, or MathCAD, • Strong laboratory testing and troubleshooting experience for prototyping, design verification testing and qualification of analog and power electronics hardware., • Direct experience designing high-reliability electronics for automotive, space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience delivering subcircuit or board designs to production and deployment., • Proficiency in printed circuit board design tools such as Altium, OrCAD/Allegro, PADS/Xpedition, or similar., • Experience running board-level power integrity simulation tools such as Ansys SiWave, ADS SIPro, or HyperLynx.

Job Description Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement. We are seeking a detail-oriented Senior Project Engineer to lead the design and development of advanced medical devices. The role involves driving electronics and embedded systems from concept to production while ensuring technical excellence, regulatory compliance ISO 13485, and successful product launches. The candidate must be able to communicate effectively with contract manufacturers (CMs) to support design transfer, production builds, and troubleshooting. This critical, hands-on role in Product Development and Engineering is based in Torrance, CA, and is not a remote or hybrid position. We offer a fast-paced, high impact and stimulating work environment with opportunities for professional growth within BCI. Veterans welcome! BASIC JOB RESPONSIBILITIES: • Lead electronics and embedded system development across the full product lifecycle — from concept, architecture, and design through to testing, validation, and manufacturing transfer., • Collaborating with Production, Marketing, and Sales for product requirements, releases, supports, and testing., • Conduct design review including schematics and PCB layouts and FW for embedded systems, video/audio signal chains, and power subsystems., • Work closely with contract manufacturers (CMs) daily to ensure product designs are implemented correctly and manufacturing aligns with specifications., • Validate conceptual problem solutions by performing trade studies and analyses., • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups., • Support and drive root cause analysis and resolution for design, validation, and field issues., • Create and maintain documentation required for design history files (DHF).Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management. EDUCATION, EXPERIENCE, & KNOWLEDGE: • Bachelor of Science in Electrical Engineering, or related field., • 7+ years of experience in electronic hardware and embedded systems design., • Knowledgeable in high-speed video/audio/data transmission, switching, and/or processing for products such as video analyzers, video scalers, video matrix switchers, video wall, etc. are highly desired., • Hands-on experience with schematics (Altium Designer or equivalent), and PCB layout., • Experience with CPLD, FPGA, and Microprocessor programming and coding, • Solid understanding of signal integrity, analog/digital design, and debugging using lab instruments (oscilloscope, spectrum analyzer, etc.)., • Prior experience in ISO 13485 environment. Demonstrable past capabilities in solving complex video design problems.PREFERRED EDUCATION, EXPERIENCE, & KNOWLEDGE, • Master’s in Electrical Engineering, Computer Engineering, or related field, preferred, • Prior experience in FDA-regulated product development., • Experience with medical-grade video and audio signal processing (e.g., HDMI, SDI, audio ADC/DAC, compression)., • Understanding of power system design, including DC-DC converters, LDOs, and isolated supplies for medical equipment., • Familiarity with real-time operating systems (RTOS) and/or low-latency firmware development., • Knowledge of Network configuration and setup., • Knowledge of Design for Manufacturing (DFM) and Design for Test (DFT) principles.SKILLS, ABILITIES, & ATTRIBUTES:, • Strong attention to detail, problem solving, organizational, time and risk management skills, and analytical abilities., • Proactive, detail-oriented, and capable of managing multiple priorities., • Comfortable working in a fast-paced, cross-functional team environment and work extended hours (as needed).., • Strong self-motivation and attitude for personal career growth, willingness to self-learn, and work in new technology domains, • Advanced proficiency in Microsoft Excel and working knowledge of Microsoft Office Suite.BENEFITS:, • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 Week sick pay, • 10 company holidays, • Group Life InsurancePAY RANGE:, • 120,000 - $150,000 annual base salaryPay may vary depending on experience, qualifications, and other job-related factors. Powered by JazzHR kspJViDTqo

Job DescriptionIf you are interested in multiple locations please only apply once, your preference will be discussed during the screening process. As an Experienced Complete Streets Designer/Civil Engineer, you will lead the evaluation, selection, and design of various transportation system solutions for a range of communities, with an emphasis on Safe Systems and Complete Streets design. You will be involved in generating conceptual designs and construction documents, collaborating with staff at all levels while conducting field work, coordinating closely with members of complete streets engineering and planning teams, engaging in discussions with clients and communities, and on-the-job training. Your focus will be to offer innovative and well-thought-out design solutions that align with client objectives and adhere to the latest best practices established by NACTO and similar organizations. Additionally, you will be responsible for project management, overseeing tasks, and assigning technical staff as necessary to deliver projects to clients. We partner with public, private, and institutional clients while embracing and striving to embody the diversity of our market area. We aim to be our clients’ most trusted partner by delivering cutting-edge technical expertise. For public sector clients, we lead PS&E, corridor studies, master plans, conceptual designs, environmental documents, and everything in between. Our private sector clients include civil engineers, urban designers, developers, and technology firms. We are a group of passionate planners and engineers who work to help communities by expanding accessibility, enhancing safety, and improving mobility. By joining Fehr & Peers, you can expect to grow your career with support at every stage while maintaining flexibility and work-life balance. Responsibilities • Preparing plans, specifications, and estimates (PS&E) for transportation engineering projects, including all ages and abilities bikeways, bus speed and reliability improvements, traffic signals, and lighting projects, • Marketing and bringing in new projects by building client relationships, preparing proposals, and presenting in interviews, • Mentoring and training your colleagues and receiving mentorship from senior staff, • Developing scopes of work and fees for multi-disciplinary traffic engineering design projects, • Managing direct client interaction and communication with members of the public through community engagement, • Preparing conceptual designs that are accurate, feasible, and visually engaging, • Leading and managing design tasks for transportation engineering and planning studies, • Performing field work, such as site review preceding design, and support during construction Qualifications, • 5-12 years of experience in transportation engineering, • A bachelor’s or master’s degree in transportation, civil or electrical engineering, urban and regional planning, or a related major (e.g., geography, math, statistics, economics), • Currently hold a California professional engineer’s (PE) license in Civil Engineering, or have the ability to obtain through reciprocity within one year, • Demonstrated understanding of complete streets, including separated bikeways, protected intersections, and roundabout layout, • Experience applying Caltrans, MUTCD, NACTO, and AASHTO design standards/guidelines on a variety of projects, • Experience developing construction documents (final design, PS&E) for traffic engineering projects, • Familiarity with preparing and reviewing signing, striping, and traffic signal plans, • Familiarity with safety countermeasure selection and design, • Familiarity with mobility issues and how they affect transportation engineering, • Familiarity with the Safe System approach to safety, • Experience leading proposals and building client relationships, • Interest and experience with mentoring and training staff Additional Desired Qualifications, • Road Safety Professional (RSP) certification, • Traffic Engineer (TE) certification, • ADA and PROWAG expertise, • Quick-build project design and implementation, • Active transportation planning and design, • Road safety planning and design

Job Description Photonic IC Designer – Help Launch the Next Generation of Optical Computing! Gardena, CA (Onsite) Opportunity Summary A stealth-mode deep tech startup is on a mission to redefine high-speed computing by building full-stack optical systems, from silicon to factory floor. Backed by experienced founders and early-stage investors, we’re developing a scalable platform that blends photonics, advanced manufacturing, and custom hardware into a vertically integrated solution. We’re hiring a Photonic Integrated Circuit (PIC) Designer to own the development of our core photonic chips. This role combines simulation, layout, tape-out, and close collaboration with test and packaging teams to ensure our first product meets performance, yield, and production readiness standards. About Us We’re a Los Angeles-based startup operating in stealth, focused on building the foundation for scalable, light-powered computing. Our founding team includes deep tech veterans with experience across hardware, optics, and manufacturing automation. We’re creating novel optical hardware alongside custom software and facilities designed to manufacture it at scale all under one roof. Job Duties • Own design and layout of next-gen silicon photonics chips for high-performance optical interconnects, • Work with foundry PDKs, and extend them where needed with custom compact models, layout cells, or verification checks, • Use FDTD and EM solvers to simulate and optimize waveguides, couplers, interferometers, and other photonic components for loss, phase, and bandwidth, • Develop and oversee test plans, including wafer probing and benchtop measurements to validate device behavior against simulation, • Collaborate across electrical, mechanical, and software teams to optimize full-system link budgets, thermal profiles, and control schemes, • Support bring-up, debug, and iteration during prototype validation and production ramp-up, • Mentor junior engineers and contribute to building a high-performance photonic design team Qualifications • MS or PhD in Optics, Photonics, Electrical Engineering, or Applied Physics, • 5+ years of hands-on experience designing photonic ICs, with at least one completed tape-out for production, • Proficiency with photonic layout tools and FDTD/EM simulation software, • Understanding of optical link characterization and integration with electronic drivers, • Strong fundamentals in waveguide design, optical loss modeling, and photonic systems, • Ability to thrive in a fast-paced, iterative development environment Preferred Experience • Experience with LiNbO₃, SOA/EDFA integration, or coherent Tx/Rx architectures, • Familiarity with control firmware (Python, C++) for electro-optic and thermo-optic tuning, • Understanding of high-speed modulation formats and photonic packaging strategies, • Comfort designing for manufacturing yield and reliability in volume production environments Why Join Us • Be a key contributor to the development of core photonic technology in a venture-backed startup, • Work closely with a multidisciplinary technical team on cutting-edge hardware, • Early equity and ownership opportunities in a company poised for scale, • Flexible work culture and high autonomy, • Paid parental leave and generous vacation policy, • Comprehensive health, dental, and vision insurance, • Relocation support to Los Angeles Compensation Details $140,000 - $200,000 plus equity

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. We are seeking a highly skilled and experienced Lead Avionics Engineer to join our dynamic team and contribute to the development of the next generation of hypersonic vehicles. As a Lead Avionics Engineer at Hermeus, you will play a pivotal role in leading the design, analysis, and testing of electrical systems for our hypersonic vehicles. You will collaborate closely with a multidisciplinary team of engineers to ensure the safe and efficient operation of our electrical systems. This position offers a unique opportunity to work on groundbreaking technology in a fast-paced and collaborative environment. Responsibilities: • Provide technical leadership across the organization, manage related risk and change across the program, drive new technology introduction, and provide mentoring for less senior engineers., • Drive system trades, requirements capture, component selection, analysis, schematic capture, prototyping, bring-up, debugging, documentation, manufacturing, and test., • Create development and qualification testing campaigns and exercise designs to their limits., • Support hardware through production, integration, and flight., • Work with experts from other teams and departments to drive changes that make the system more efficient, manufacturable, and reliable. Challenge assumptions and build strong professional relationships. Minimum Requirements:, • Bachelor's degree in Electrical Engineering, • 5+ years of experience in multiple of the following areas: electrical hardware design, control systems, instrumentation and signal conditioning, digital communication busses, analog design and simulation, power electronics, harness design, • 1+ years leading a technical engineering team. Preferred Skills and Experience:, • Breadth of experience across various electrical technical fields including RF, digital, analog, and video systems, • Demonstrated project experience with embedded design, device integration, V&V, environmental qualification and/or flight testing, • Hands-on experience designing, building, and/or servicing electrical power distribution systems and/or networks, • Familiarity with test and simulation tools (DMM, Oscilloscope, power supplies, SPICE, Ansys), • Experience with electrical and mechanical design and version control software (Altium Designer, Siemens NX, Teamcenter, Capital Harness, Git, Teamcenter), • Experience with avionics devices and protocols (RS-485, ARINC-685, FPGAs, GPS, INS, D38999 style connectors, etc.), • Strong analysis and troubleshooting skills, • Familiarity with aerospace industry standards (IPC-620, MIL-STD-810, MIL-STD-704, MIL-HDBK-516C, MIL-STD-464D, DO-160G), • Experience working with DC power systems (Batteries, Motors, Generators, etc.), • Self-motivated with strong organizational, written, and oral communication skills, • Writing software in Python or similar for analysis or data review, • A bias towards action, and a willingness to work hands-on to make it happen Additional Requirements: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary The Electrical Designer is a seasoned contributor with advanced Revit expertise, proven documentation skills, and growing leadership capability. This role balances deep technical contributions with oversight responsibilities, including mentorship, QAQC, and project coordination. The Electrical Designer III operates independently on complex electrical tasks, delegates work to others, and acts as a key resource for electrical system integration and design strategy across the team. Essential Functions: • Lead the development of medium-to-large scale electrical design packages in Revit with minimal redlines or rework., • Develop and enforce Revit standards, families, and workflows for electrical modeling across teams., • Create advanced electrical system layouts and manage complex modeling tasks independently., • Oversee electrical drawing production, ensuring code compliance and graphic clarity across all documents., • Generate and review technical documentation including primarily Division 26 specifications and report narratives., • Perform and validate electrical system sizing and load calculations without oversight., • Lead cross-discipline coordination meetings and resolve system conflicts with internal and external teams., • Oversee energy code compliance and ensure documentation supports lighting and power performance verification., • Develop and apply standard electrical calculation methods and templates for internal use., • Manage portions of the project scope independently, delegating drafting or research tasks to staff., • Estimate, track, and manage hours for self-performed and delegated electrical work., • Lead electrical field surveys, construction administration responses, and RFI reviews as a primary contact., • Train and mentor team members on design practices, tools, and standards., • Delegate work strategically based on skill level and workload capacity of team members., • Lead QAQC efforts on both self-produced and delegated work, ensuring conformance to HED standards., • Provide constructive feedback and contribute to staff development through mentorship., • Act as the lead technical representative in client meetings, confidently presenting technical aspects of electrical design intent., • Document meeting outcomes and action items related to electrical systems clearly, sharing responsibility for technical coordination follow-up., • Engage in early project scoping discussions and support proposal efforts with technical narratives and fee input. Requirements • Bachelor's degree in directly related field or equivalent experience required., • 5+ years of experience in the AEC industry required., • 2+ years of experience in DSA projects required, LAUSD experience is desired., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description Electrical Designer - Mission Critical Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Mission Critical (Data centers) facilities. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a seasoned contributor with advanced Revit expertise, proven documentation skills, and growing leadership capability. This role balances deep technical contributions with oversight responsibilities, including mentorship, QAQC, and project coordination. The Electrical Designer operates independently on complex electrical tasks, delegates work to others, and acts as a key resource for electrical system integration and design strategy across the team. Essential Functions: • Lead the development of medium-to-large scale electrical design packages in Revit with minimal redlines or rework., • Develop and enforce Revit standards, families, and workflows for electrical modeling across teams., • Create advanced electrical system layouts and manage complex modeling tasks independently., • Oversee electrical drawing production, ensuring code compliance and graphic clarity across all documents., • Generate and review technical documentation including primarily Division 26 specifications and report narratives., • Perform and validate electrical system sizing and load calculations without oversight., • Lead cross-discipline coordination meetings and resolve system conflicts with internal and external teams., • Oversee energy code compliance and ensure documentation supports lighting and power performance verification., • Develop and apply standard electrical calculation methods and templates for internal use., • Manage portions of the project scope independently, delegating drafting or research tasks to staff., • Estimate, track, and manage hours for self-performed and delegated electrical work., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Train and mentor team members on design practices, tools, and standards., • Delegate work strategically based on skill level and workload capacity of team members., • Lead QAQC efforts on both self-produced and delegated work, ensuring conformance to HED standards., • Provide constructive feedback and contribute to staff development through mentorship., • Act as the lead technical representative in client meetings, confidently presenting technical aspects of electrical design intent., • Document meeting outcomes and action items related to electrical systems clearly, sharing responsibility for technical coordination follow-up., • Engage in early project scoping discussions and support proposal efforts with technical narratives and fee input., • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Experience with large power infrastructure projects preferred., • Experience with hyperscale data center projects preferred., • Revit experience required., • 5+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

Job Description JOB SUMMARY:Under the direction of the Managing Principal, the Senior Interior Designer will be responsible for the initial design conception, technical development and execution of assigned project phases and assembly and maintenance of related documents. The Senior Interior Designer is expected to perform at an advanced level as a result of their extensive training and/or experience. The ideal candidate will have experience developing hotel and resort interiors as well as large scale luxury residences. REPORTING RELATIONSHIPS:The Senior Interior Designer reports to the Managing Principal, and can report to the project manager on project related issues. The Interior Designer, Designer and Design Intern positions may take direction from the Senior Interior Designer on design project related matters. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Assume a lead role in design presentations in communicating directly with clients and insure that format is compatible with office and client standards.• Conceptualize design direction for overall project and communicate to project team.• Ability to function as a team with other project members and work in a positive, collaborative manner., • Review and understand with professional proficiency detailed construction documents including floor plans, elevations and sections, electrical details, schedules (finish, plumbing fixture, decorative hardware), furniture floor plans, FF&E specifications, materials and finishes to determine compliance in quality, code (ie accessibility, flammability, etc.} and design.• Direct and review furniture installation plans and shop drawings for content and accuracy and insure that they are fully coordinated with all pertinent consultant drawings.• Generate schematic design development and final FF&E design based on project criteria, program and budget.• Develop FF&E and architectural finish specifications for documentation, review and approve FF&E purchase orders, coordinate FF&E installation with all parties involved and maintain budget for all phases of the project interiors.• Coordinate all architectural finishes with Project Coordinator and review plans and details to ensure proper coordination of finishes and item numbers.• Have knowledge of contractual responsibilities as they relate to FF&E in all phases of the project., • Maintain a strong working knowledge of FF&E specification minimum standards, informational requirements for specification and computer specification program requirements.• Provide direction related to furniture and equipment inventories to purchasing agent or expediter., • Serve as principal contact for purchasing agent and vendors while working with them to select design elements that are to be specified and establish all required information for documentation.• Coordinate design direction and in conjunction with the project manager the management of outside consultants., • Participate in the solicitation of proposals for services to be provided by outside consultants as it relates to FF&E.• Communicate project status to Managing Principal on a regular basis and develop and maintain communication with all project team members.• Review samples, strike-offs, etc. for compliance with specifications and overall design intent., • Attend site meetings and assist in the process of reviewing properties along with the project manager., • Participate in maintaining relationships with existing clients and nurture relationships with potential new clients., • Participate in the establishment and maintenance of design standards for the firm., • Keep abreast of new hospitality industry trends that may influence design scheme., • Function as Project Manager on limited scope renovation projects., • Provide senior level technical aptitude when formulating design parameters and executing design work., • Ability to establish logical action plans to complete work and provide technically sound solutions within deadline and budget constraints.• Strong comprehension of hospitality design and products.• Solid background interior architecture and FF&E.• Computer skills: Photoshop and/ or Indesign, working knowledge of Bluebeam, Auto CAD, Word, Excel, Sketchup and SPEXX., • Experienced presentation skills., • Excellent written, verbal and management communication skills., • Must have strong organizational skills and be able to handle multiple projects simultaneously and meet deadlines consistently.• Ability to perform efficiently in a fast-paced, deadline oriented environment., • Exceptional customer-focus with an emphasis on relationship building.• Strong ability to resolve issues utilizing sound judgment and reasoning skills., • Professional, Ethical and committed to excellence in communications., • Ability to collaborate and work effectively with other co-workers, departments or business units., • Assertive and motivated to generate results., • Ability to work independently and take initiative in identifying and resolving problems utilizing sound judgment and reasoning skills.• Exceptional time management skills., • Ability to employ creative and innovative thought processes.• Ability to be flexible and adaptable.• Ability to exercise and employ effective leadership skills and influence others across functions; builds support and engagement., • Ability to effectively train and motivate other staff members.• Proficiency in Microsoft Windows, Word. Excel, Outlook and Design Manager.• Ability to travel up to 25%. EDUCATION & EXPERIENCE:Minimum of 8-1O year’s hospitality design experience preferred. Two or four year degree from an accredited interior design program.

Job DescriptionPosition Summary The ICT Engineer contributes advanced technical expertise to the design and coordination of information and communication technology systems on complex projects. Operating with limited guidance, this role produces ICT design deliverables, resolves cross-discipline issues, and supports client communication. ICT Engineers at this level demonstrate strong technical judgment, contribute to quality efforts, and begin to take ownership of key project components, while still collaborating closely with senior staff for overall project direction. Essential Functions: • Develop ICT and security system designs for complex projects, producing calculations and documentation with limited supervision., • Manage Revit models and low-voltage system views to support project deliverables., • Perform and validate calculations for cabling distances, voltage drops, and equipment loads, applying results to project design decisions., • Resolve cross-discipline coordination issues in collaboration with architects, structural, and civil engineers., • Support site visits, field reports, punch lists, and construction administration activities., • Contribute to QA/QC processes by reviewing design accuracy and compliance with project standards., • Mentor junior staff on project tasks and workflows, with guidance from senior engineers., • Participate in technical meetings and client discussions, supporting senior staff in presentations., • Assist in proposal preparation and scoping efforts by providing technical input.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, or a related field, or equivalent experience., • Registered Communications Distribution Designer (RCDD) and/or PSP or CPP certification required., • 2–5 years of experience in ICT, Physical Security or low-voltage systems design within the AEC industry., • Familiarity with BICSI, EIA/TIA, NEC, and other applicable telecommunications standards., • Proficiency in Revit with experience producing and coordinating low-voltage design documentation., • Strong communication, problem-solving, and organizational skills.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.