Electrical designer jobs in San Diego, CaliforniaCreate job alerts

Job Description ICT Designer HED is looking to add a talented person to our ICT team. The person filling this position will be responsible designing ICT systems for complex projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The ICT Designer is a trusted contributor with advanced technical experience in low-voltage and communication systems. This role combines deep design execution with growing project leadership responsibilities. Operating with a high degree of autonomy, the ICT Designer contributes to project delivery, leads coordination efforts, mentors junior staff, and supports the refinement of internal standards and best practices across the discipline. Essential Functions • Lead the development of mid to large-scale ICT design packages including floor plans, riser diagrams, and device layouts in Revit., • Independently create and manage Revit families, system templates, and modeling workflows for ICT., • Ensure alignment of documentation with applicable codes, client standards, and project specifications., • Perform advanced calculations related to cable routing, backbone sizing, and equipment loads., • Oversee QAQC of deliverables and provide technical guidance to junior team members., • Lead internal and cross-discipline coordination meetings and resolve design conflicts., • Edit and generate technical narratives, basis of design documents, and specifications., • Participate in construction administration including field surveys, submittal reviews, and RFI responses., • Estimate and manage time budgets for own work and delegated tasks; monitor progress against DWP plans., • Train team members in ICT design standards, tools, and workflows, and contribute to knowledge sharing within the discipline.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2-5 years of experience in technology infrastructure or low-voltage systems design in the AEC industry., • Proficient in Revit and experienced with AutoCAD, Bluebeam, and Office Suite., • Strong understanding of BICSI standards and telecommunications codes such as NEC, EIA/TIA, and NFPA., • Ability to lead technical portions of meetings and mentor junior staff., • Demonstrated organizational, problem-solving, and leadership skills.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. JOB DESCRIPTION:As an Architect designer on the HMS Architecture Team, you’ll be at the forefront of designing next-generation autonomous solutions by defining, managing, and governing a key system domain. You’ll collaborate closely with Hivemind (HM) counterparts—across Pilot, Foundation, Forge, and Commander—to seamlessly integrate your domain into the larger ecosystem. Balancing bold innovation with program objectives, you’ll proactively tackle emerging challenges before they impact HMS programs, all while building architectures that stand the test of time. In addition to driving the HMS technical roadmap, you’ll play a pivotal role on the Future Concepts team, pioneering cutting-edge autonomy applications for Shield AI in maritime and space environments. This unique vantage point gives you the chance to explore uncharted territory, pushing technical boundaries and unlocking novel possibilities for next-generation systems. You’ll serve as the “belly button” for technical alignment between HM and HMS, ensuring both organizations remain in sync on roadmaps, designs, and execution strategies. Through close partnership with Chief Engineers and the joint Architecture Board, you’ll have significant influence over the technical roadmap, systems engineering processes, and strategic decision-making. In short, you’ll be the catalyst driving cohesive, forward-thinking solutions that turn big ideas into operational reality. KEY RESPONSIBILITIES: • Domain & Design Ownership, • Lead the architecture for your specialized domain, defining designs, interfaces, and dependencies that effortlessly fit into the broader system., • Stay ahead of evolving requirements, creating both short- and long-term technical strategies that spark innovation., • Collaboration & Integration, • Partner with fellow architects and the Architecture Board to synchronize roadmaps, eliminate cross-domain hurdles, and keep complex programs on track., • Act as the central conduit between Hivemind (HM) and HMS, proactively tackling challenges before they escalate., • Technical Roadmap & Innovation, • Shape the future of your domain by driving a dynamic technical roadmap aligned with customer and program objectives., • Champion IRAD opportunities and new concepts, ensuring cutting-edge ideas are tested, validated, and swiftly integrated., • Governance & Stakeholder Engagement, • Influence Systems Engineering processes and program strategies in close coordination with Chief Engineers, keeping all decisions grounded in cohesive governance standards., • Gather insights from diverse stakeholders—Systems Engineers, Program Managers, Business Development—to inform design choices and maintain continuous alignment., • Testing & Evolution, • Define rigorous testing strategies that validate architectural integrity, ensuring every solution meets system-level objectives and user needs., • Evaluate emerging technologies and novel applications for feasibility, helping guide HMS and HM into groundbreaking new territory.KEY OUTCOMES:, • Delivery of robust, scalable architectures for their assigned domain, fully integrated into the overall system., • Comprehensive documentation of MBSE artifacts, designs, interfaces, and testing strategies., • Clear alignment of HM and HMS technical roadmaps and development strategies, communicated effectively to stakeholders., • Technical innovation driven by a balance of short- and long-term program needs., • Effective collaboration across architects, stakeholders, and teams to ensure alignment and coherence in execution.WHAT YOU'LL DO:, • Lead the design and integration of complex system architectures for autonomous systems., • Develop and maintain a technical roadmap that aligns with both immediate product milestones and broader strategic objectives., • Participate in architecture reviews and provide technical guidance on best practices, design patterns, and technology choices., • Proactively identify potential risks or bottlenecks and lead the effort to mitigate them.REQUIRED QUALIFICATIONS:, • Master’s degree in Computer Science, Electrical Engineering, Systems Engineering, or a related technical field., • 8+ years of experience in systems or software architecture for complex, distributed, or mission-critical applications., • Demonstrated expertise in creating and managing architectural artifacts (e.g., system context diagrams, UML/SysML models, interface definitions, design patterns)., • Proven success coordinating diverse technical teams, resolving stakeholder conflicts, and ensuring cohesive end-to-end solutions., • Solid understanding of DevOps practices, CI/CD pipelines, and modern software development methodologies in an Agile environment., • Familiarity with architecture frameworks such as DoDAF, particularly in regulated or defense-oriented contexts. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description DIRECT HIRE OPPORTUNITY Job Description We are seeking a skilled CAD Drafter / Modeler to support large-scale design/build projects involving complex mechanical, structural, and electrical systems. This position is ideal for someone who enjoys working on detailed assemblies, technical drawings, and collaborating closely with engineers and project teams to bring unique designs to life. Hours Monday - Friday 7:00AM - 3:30PM Pay $77,000 - $138,000 annually Job Duties • Develop and update 3D models, detailed part drawings, and full assembly layouts for complex systems and equipment., • Create construction, fabrication, and installation drawings for mechanical, civil, structural, and electrical disciplines., • Prepare Piping & Instrumentation Diagrams (P&IDs), piping layouts, and tubing assemblies following ASME standards., • Generate pressure vessel and weldment drawings with accurate dimensions, tolerances, and material specifications., • Support engineers by converting design concepts into manufacturable models and assemblies., • Perform BOM creation and management, ensuring all components, fasteners, and subassemblies are properly detailed for procurement., • Collaborate with engineers and project managers to review designs for accuracy, manufacturability, and safety compliance., • Work directly with vendors and fabrication teams to resolve design challenges, review redlines, and verify drawing accuracy., • Manage drawing tree structures, revision histories, and documentation control within PLM or ERP systems., • High school diploma or equivalent required; degree or certification in CAD, mechanical design, or related field preferred., • 5+ years of experience as a CAD Drafter, Designer, or Modeler in a manufacturing, engineering, or fabrication environment., • Advanced proficiency with Autodesk Inventor 2019 or newer and AutoCAD 2019 or newer., • Hands-on experience with P&ID drafting and assembly design required., • Familiarity with ASME piping, pressure vessel codes, and mechanical fabrication standards preferred., • Strong understanding of dimensioning, tolerancing, and GD&T practices., • Working knowledge of PLM/ERP systems for BOM management and revision control., • Proficient in Microsoft Outlook, Excel, Word, and Adobe Acrobat., • Excellent communication skills and attention to detail, with the ability to manage multiple projects and deadlines.Company DescriptionOur Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.Our Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.

Wireless Hardware Product Architect & Designer Location: Nationwide – Remote (U S) The Opportunity Our confidential client is re-imagining last-mile connectivity with breakthrough multi-gigabit wireless platforms. Join a nimble, venture-backed engineering organization where you will design the hardware brains behind systems that deliver fiber-class speeds - without the fiber. Your work will shape a product line already attracting tier-one carriers and poised for rapid global expansion. About the Role As the senior technical owner, you will transform ideas into carrier-grade hardware - guiding architecture, schematics, layout, validation, and ramp-to-production. Key Responsibilities • Own end-to-end hardware architecture, from concept and schematic capture through lab bring-up and manufacturing release, • Lead multilayer PCB design for 10 G/25 G/40 G SerDes, high-speed Ethernet, and advanced 802.3bt PoE power delivery, • Model and optimize signal- and power-integrity; drive SI/PI simulations and hands-on validation with oscilloscopes, VNAs, and high-frequency probes, • Define power budgets and implement DC-DC, PoE, and thermal solutions that withstand outdoor and telecom environments, • Partner with RF, mechanical, firmware, and manufacturing teams to secure EMI/EMC certifications and seamless system integration, • Generate BOMs, test plans, and manufacturing guides; champion DFM and DFT best practices, • Mentor junior engineers and act as the primary technical liaison for suppliers and CMs Required Skills & Experience • S. or M.S. in Electrical Engineering (or similar), • 7 + yrs designing complex digital or mixed-signal hardware for wireless/telecom, edge compute, or networking products, • Mastery of high-speed PCB layout, differential pair design, and PoE circuitry; strong Altium/Cadence/KiCad proficiency, • Lab expertise with scopes, logic & spectrum analyzers, and automated SI/PI measurement setups, • Track record releasing products to volume production and managing overseas contract manufacturers, • Comfortable driving agile, distributed design reviews; excellent written and verbal communication Bonus Points • Experience with mmWave radios or antenna arrays, • Familiarity with carrier-class outdoor enclosures and environmental testing Why You’ll Love It • Competitive compensation plus meaningful equity in a high-growth startup, • Remote-first culture with flexible hours and periodic meet-ups in sunny San Diego, • Green-field ownership and direct influence on next-generation connectivity hardware, • Streamlined two-round interview process and option to begin part-time consulting during notice period About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Job Description Electrical Designer - Mission Critical Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Mission Critical (Data centers) facilities. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a seasoned contributor with advanced Revit expertise, proven documentation skills, and growing leadership capability. This role balances deep technical contributions with oversight responsibilities, including mentorship, QAQC, and project coordination. The Electrical Designer operates independently on complex electrical tasks, delegates work to others, and acts as a key resource for electrical system integration and design strategy across the team. Essential Functions: • Lead the development of medium-to-large scale electrical design packages in Revit with minimal redlines or rework., • Develop and enforce Revit standards, families, and workflows for electrical modeling across teams., • Create advanced electrical system layouts and manage complex modeling tasks independently., • Oversee electrical drawing production, ensuring code compliance and graphic clarity across all documents., • Generate and review technical documentation including primarily Division 26 specifications and report narratives., • Perform and validate electrical system sizing and load calculations without oversight., • Lead cross-discipline coordination meetings and resolve system conflicts with internal and external teams., • Oversee energy code compliance and ensure documentation supports lighting and power performance verification., • Develop and apply standard electrical calculation methods and templates for internal use., • Manage portions of the project scope independently, delegating drafting or research tasks to staff., • Estimate, track, and manage hours for self-performed and delegated electrical work., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Train and mentor team members on design practices, tools, and standards., • Delegate work strategically based on skill level and workload capacity of team members., • Lead QAQC efforts on both self-produced and delegated work, ensuring conformance to HED standards., • Provide constructive feedback and contribute to staff development through mentorship., • Act as the lead technical representative in client meetings, confidently presenting technical aspects of electrical design intent., • Document meeting outcomes and action items related to electrical systems clearly, sharing responsibility for technical coordination follow-up., • Engage in early project scoping discussions and support proposal efforts with technical narratives and fee input., • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Experience with large power infrastructure projects preferred., • Experience with hyperscale data center projects preferred., • Revit experience required., • 5+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

Job Description HIRING NOW: MEP Design Engineer/ Associate Engineer - San Diego, CA About Us: We're an award-winning MEP Engineering firm with our HQ in San Diego and offices throughout the Southwest, including Phoenix, AZ. We specialize in providing MEP and Engineering services to regional and national clients across a wide range of diverse project types, including, but not limited to commercial, Hospitality, Residential, Mixed-Use, Retail, Healthcare, S&T, Labs, and Industrial. We have a welcoming and supportive culture, collaborative team, and open door policy, and offer uncapped career advancement opportunities. We're consistently ranked as a top workplace and awarded for our projects, culture, and client satisfaction. Job Title: MEP Design Engineer / Associate Engineer Location: Phoenix, AZ - Full-time, On-Site/Hybrid About the Role: We are seeking a driven Associate Engineer to join our dynamic team and contribute to cutting-edge MEP (mechanical, electrical, and plumbing) projects across diverse sectors such as commercial, multifamily, mixed-use, and life sciences. This position offers a growth-oriented pathway where your expertise will be nurtured alongside experienced professionals in a collaborative environment committed to excellence and sustainability. Key Responsibilities: • Lead the design and drafting of comprehensive MEP systems for various building projects, aligning with industry standards and client specifications., • Execute detailed analyses, including load calculations, design layouts, and system distribution., • Collaborate with interdisciplinary teams to produce high-quality design packages, construction documents, and technical specifications., • Review and evaluate contractor submissions, shop drawings, and RFIs for adherence to design intentions and code compliance., • Mentor junior engineers and guide project development while maintaining rigorous quality standards., • Interface with clients, architects, and project teams, contributing expert knowledge and fostering seamless project execution., • Stay informed on evolving codes and trends in MEP engineering to continually enhance project quality and innovation. Qualifications: • Bachelor’s degree in Mechanical, Electrical, or a related engineering field (preferred)., • 3-5 years of relevant experience in MEP engineering., • PE licensure or commitment to obtaining within a reasonable period (preferred)., • Proficiency with AutoCAD, Revit, and related design software., • Strong problem-solving skills and meticulous attention to detail., • Comprehensive understanding of California building codes and MEP regulations., • Effective communication and leadership skills to manage projects and mentor team members. Compensation & Benefits Package - Competitive: • Competitive salary based on experience - $75,000-100,000/year starting year 1, flexible, • Full Benefits: Comprehensive health benefits including dental and vision (50% coverage), • 401(k) with employer matching up to 10%., • Generous PTO and company holidays., • Access to on-site gym and pool facilities., • Professional development support., • Flexible work schedules and a collaborative, growth-friendly environment. Join Us & Apply Today!: Be part of an innovative engineering firm where your ideas and expertise drive impactful projects. Apply now and advance your career in a role that blends technical challenges with professional development! If you're interested in a Mechanical Designer Engineer/Associate and local in San Diego, CA then please apply today and email your updated resume to

Job Description Q Microwave, a leader in the precision RF manufacturing, design and manufacture of cutting-edge military and defense microwave solutions, is seeking a PCB Layout Designer to join our entrepreneurial, collaborative, and fast-paced team located in El Cajon, CA. Q Microwave is recognized for its advanced capabilities in RF filtering and custom RF subassemblies—technologies that require deep technical knowledge and a passion for precision. Our fully vertically integrated facility in San Diego enables close collaboration between design and manufacturing, ensuring unmatched quality and performance in RF product development. As a part of Amphenol’s global network of over 130 business units, Q Microwave operates with the technical focus and agility of a specialized design center while leveraging the strength, stability, and resources of one of the world’s largest interconnect solution providers. As a PCB Layout Designer, you will play a critical role in developing cutting-edge RF and microwave subassemblies for mission-critical military and aerospace radar and communications systems. You will collaborate closely as part of a highly skilled, cross-functional engineering team—working alongside RF, mechanical, firmware, and test engineers—to design and integrate advanced digital hardware systems, including complex CCAs, flexible circuits, and custom test interfaces. Key Responsibilities: • Read, interpret, and capture electrical schematics., • Capture layouts following standard and HDI processes for board layer count from 2 to 16 with standard, blind, and buried vias and double-sided component placements., • Experience with layout of digital, analog, and power converter systems., • Manage and maintain shared component libraries, databases, and shared building block designs., • Capture new symbols and footprints, including mechanical information., • Generate manufacturing collateral, including draftsman mechanical drawings and technical specifications., • Participate in design for manufacturing (DFM) reviews., • Work closely with power electronic engineers and contract manufacturers, including international manufacturers., • Ensure processes are followed to comply with quality controls., • Setup and manage design rules and stack-ups, pad-stacks for various types of designs., • Advise on cost reduction or high-performance techniques., • Help establish new and efficient design procedures., • Provide technical guidance and mentor team members., • Utilize schematic capture and PCB layout tools (e.g., Allegro or similar) to create robust, space- and noise-optimized designs suitable for high-reliability applications., • Participate in technical design reviews and work collaboratively with cross-disciplinary teams including RF, mechanical, manufacturing, and quality engineering., • Support risk management efforts by identifying electrical design risks and developing mitigation strategies. Minimum: • In-depth knowledge of the PCB design process., • Associate or bachelor's degree in a technical field (eg. Electrical Engineering, Computer Science, Drafting), • 3+ years of experience in using Allegro[preferred], Altium, EAGLE, or similar PCB layout software. Including in-depth knowledge of working with a database, net classes, high voltage rules, variants, and job files., • Experience in working collaboratively with electrical engineering defining PCB design., • Knowledge of signal integrity, power distribution, and noise mitigation best practices in high-speed digital designs is a plus., • Proficient in basic office tools including Microsoft Office (Excel, Word, PowerPoint) and email platforms, • This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a “US Person” under US export laws (or eligible for approval under a U.S. Government export license)., • Five (5) to Eight (8+) years experience., • Active Security Clearance., • Familiarity with component selection for high-reliability/aerospace/defense applications., • Hands-on experience with digital and mixed-signal simulation tools (e.g., SPICE-based simulators)., • Ability to lift 25–50 lbs. of test equipment with assistance., • Fast-paced environment with frequent interaction with supervisors., • Work in a collaborative environment with growth opportunities., • Be part of a supportive team focused on quality and efficiency., • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off This position is an excellent opportunity for motivated individuals who are ready to take the next step in their careers in manufacturing and production. Applicants must be U.S. citizens. Q Microwave is an Equal Opportunity Employer. Ready to take the next step in your career? Apply today!

Job Description Electrical Designer - Healthcare Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Healthcare facilities, with knowledge of California building codes, OSHPD/HCAI requirements, and energy efficiency standards. This role also involves collaborating with architects, project managers, and contractors to design, specify, and deliver reliable electrical systems that meet the unique needs of Healthcare environments. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a high-level technical role responsible for driving electrical project delivery and engineering quality across large and complex projects. This individual is an electrical system expert, Revit authority, and go-to mentor within the discipline. They are expected to guide project teams through all design phases, resolve complex coordination challenges, and ensure quality and consistency across documentation. The Electrical Designer serves as a bridge between technical execution and strategic planning and is expected to influence standards, coach team members, and represent the firm in advanced technical discussions with clients and consultants. Essential Functions: • Lead the production and coordination of full electrical design packages for large-scale or highly complex projects., • Standardize Revit workflows across teams and lead development of firmwide modeling resources, families, and templates., • Resolve advanced technical modeling challenges and mentor staff in efficient BIM strategies for electrical systems., • Review and approve project documentation for compliance with code, performance objectives, and client requirements., • Author and edit electrical project narratives, design briefs, and owner-facing documents with minimal oversight., • Integrate multiple complex systems across disciplines; resolve electrical system conflicts with other discipline teams., • Perform advanced electrical system analysis, including lifecycle assessments, decarbonization strategies, and code interpretations., • Lead project lighting simulation or energy modeling coordination to inform electrical system decisions., • Develop and implement firm tools for electrical load calculations, system sizing, and code compliance checking., • Define project design strategies, workflows, and milestone deliverables in collaboration with engineers and project managers., • Independently scope and plan project phases, including resourcing and delegation across disciplines and offices., • Ensure technical delivery aligns with project budgets, schedules, and quality expectations., • Provide cross-project mentorship in system design, QAQC strategies, and advanced documentation techniques., • Guide emerging designers and engineers in technical decision-making and problem-solving approaches., • Develop structured onboarding or training content for new electrical staff or designers., • Model team collaboration and delegate electrical design work strategically to grow others’ confidence and capability., • Lead technical segments of client and consultant meetings related to electrical systems, including design presentations and technical decision-making forums., • Communicate clearly and confidently about technical decisions, trade-offs, and performance metrics with diverse audiences., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Influence client and project partner expectations around technical scope, documentation quality, and system performance., • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Familiarity with California HCAI/OSHPD agency, processes and requirements preferred., • Experience with Kaiser Permanente projects preferred., • 10+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

Job Description Job Overview We are seeking an experienced Senior Aerospace Electrical Engineer with extensive expertise in Unmanned Aerial Vehicles (UAVs) to lead and innovate within our engineering team. The ideal candidate will have a strong background in guidance systems, servo control, rugged design, design assurance, verification testing, and quality control, coupled with proven leadership and mentoring skills. This role demands hands-on technical proficiency and the ability to guide multidisciplinary teams in delivering high-performance electrical systems for aerospace applications. Key Responsibilities • System Design and Innovation: Lead the design and development of advanced electrical systems for UAVs, including guidance systems, servo control mechanisms, and power management solutions, ensuring alignment with mission-critical requirements., • Rugged Design: Oversee the development of durable electrical components and systems engineered to withstand harsh environmental conditions, including extreme temperatures, vibrations, and electromagnetic interference., • Guidance Systems: Direct the integration of sophisticated guidance and navigation systems, incorporating sensors, GPS, and inertial navigation units, to achieve precise and reliable UAV performance., • Servo Control: Spearhead the design and optimization of servo control systems for precise actuation and stabilization of UAV components, such as control surfaces, gimbals, and payloads., • Design Assurance: Establish and enforce design assurance processes to ensure compliance with aerospace standards (e.g., DO-160, DO-254, MIL-STD), driving reliability and safety in all designs., • Verification Testing: Develop and lead comprehensive verification and validation testing strategies, overseeing test execution to confirm system performance, durability, and compliance under simulated and operational conditions., • Quality Leadership: Collaborate with quality assurance teams to define and uphold rigorous quality standards, leading root cause analysis and implementing corrective actions to maintain product excellence., • Hands-On Expertise: Actively participate in prototyping, troubleshooting, and system integration, leveraging hands-on skills to resolve complex technical challenges and validate designs., • Team Leadership and Mentorship: Mentor and guide junior engineers, fostering technical growth and collaboration while leading cross-functional teams to achieve project milestones and objectives., • Education: Bachelor’s degree in Electrical Engineering, Aerospace Engineering, or a related field; Master’s degree strongly preferred., • Experience:, • Minimum of 8 years of experience in aerospace electrical engineering, with at least 5 years focused on UAV systems., • Demonstrated expertise in guidance systems, servo control, ruggedized design, and verification testing., • Proven leadership experience, including managing teams and mentoring engineers., • Technical Skills:, • Advanced proficiency in CAD tools (e.g., Altium Designer, Cadence) for circuit design and PCB layout., • Expertise in embedded systems, microcontrollers, and real-time operating systems., • In-depth knowledge of aerospace standards (e.g., DO-178C, DO-254, MIL-STD-810)., • Proficiency with test equipment, including oscilloscopes, signal analyzers, and environmental test chambers., • Leadership Skills:, • Strong ability to lead and inspire technical teams, manage projects, and drive innovation., • Excellent communication skills to collaborate with stakeholders and present complex technical information clearly., • Proven mentoring skills to develop junior engineers and foster a culture of excellence., • Soft Skills:, • Exceptional problem-solving and analytical skills with a focus on quality and precision., • Extensive experience with UAV flight control systems, autopilot integration, and sensor fusion., • Familiarity with FAA and international certification processes for UAVs., • Background in designing fault-tolerant and redundant systems for high-reliability aerospace applications.

Job Description Position Summary The Electrical Designer is a seasoned contributor with advanced Revit expertise, proven documentation skills, and growing leadership capability. This role balances deep technical contributions with oversight responsibilities, including mentorship, QAQC, and project coordination. The Electrical Designer III operates independently on complex electrical tasks, delegates work to others, and acts as a key resource for electrical system integration and design strategy across the team. Essential Functions: • Lead the development of medium-to-large scale electrical design packages in Revit with minimal redlines or rework., • Develop and enforce Revit standards, families, and workflows for electrical modeling across teams., • Create advanced electrical system layouts and manage complex modeling tasks independently., • Oversee electrical drawing production, ensuring code compliance and graphic clarity across all documents., • Generate and review technical documentation including primarily Division 26 specifications and report narratives., • Perform and validate electrical system sizing and load calculations without oversight., • Lead cross-discipline coordination meetings and resolve system conflicts with internal and external teams., • Oversee energy code compliance and ensure documentation supports lighting and power performance verification., • Develop and apply standard electrical calculation methods and templates for internal use., • Manage portions of the project scope independently, delegating drafting or research tasks to staff., • Estimate, track, and manage hours for self-performed and delegated electrical work., • Lead electrical field surveys, construction administration responses, and RFI reviews as a primary contact., • Train and mentor team members on design practices, tools, and standards., • Delegate work strategically based on skill level and workload capacity of team members., • Lead QAQC efforts on both self-produced and delegated work, ensuring conformance to HED standards., • Provide constructive feedback and contribute to staff development through mentorship., • Act as the lead technical representative in client meetings, confidently presenting technical aspects of electrical design intent., • Document meeting outcomes and action items related to electrical systems clearly, sharing responsibility for technical coordination follow-up., • Engage in early project scoping discussions and support proposal efforts with technical narratives and fee input. Requirements • Bachelor's degree in directly related field or equivalent experience required., • 5+ years of experience in the AEC industry required., • 2+ years of experience in DSA projects required, LAUSD experience is desired., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description ICT Designer HED is looking to add a talented person to our ICT team. The person filling this position will be responsible designing ICT systems for complex Mission Critical projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The ICT Designer builds on foundational design knowledge to contribute to the execution of complex low-voltage and technology infrastructure projects. This role emphasizes developing expertise in systems such as structured cabling, AV, and security while deepening coordination capabilities and technical acumen. Working under the guidance of senior designers and engineers, this individual begins to take ownership of portions of technology packages and demonstrates initiative in problem-solving, design coordination, and client communication. Essential Functions: • Model ICT system components in Revit including pathways, outlets, equipment, and devices based on code, client requirements, and engineering guidance., • Assist in developing project documentation including floor plans, riser diagrams, and device schedules., • Perform basic calculations for conduit fill, cabling distances, and equipment loads with limited oversight., • Collaborate with project engineers and architects to coordinate technology system layouts with building design., • Contribute to redline markups and assist in delegating documentation tasks., • Participate in QA/QC reviews and resolve technical or graphical issues in documentation., • Review and edit specifications under the guidance of project engineers., • Attend project meetings and site visits to support coordination and client interaction., • Manage assigned project hours and report progress to team leads., • Engage in HED’s Design Work Planning (DWP) process and estimate time required for task completion.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2+ years of experience in technology infrastructure design or a related AEC discipline., • Proficient in Revit; experience with AutoCAD, Bluebeam, and Microsoft Office., • Familiarity with standards such as BICSI, EIA/TIA, and NEC., • Strong organizational and communication skills., • Self-motivated with a collaborative mindset and enthusiasm for innovation.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.

Job Description We are seeking an experienced Senior Substrate Designer to support the development of advanced IC packaging solutions. In this role, you will design high performance substrates that enable next generation semiconductor products. You will work closely with design engineering test engineering and operations teams to ensure high quality manufacturable solutions that meet electrical mechanical and thermal requirements. Key Responsibilities Substrate Design and Layout • Create complex multi layer substrate designs for high speed mixed signal and power ICs, • Develop detailed layout including routing stackups via structures and design rules, • Optimize layouts for signal integrity power integrity and thermal performance Cross Functional Collaboration • Partner with IC design teams to understand die level requirements and translate them to substrate architecture, • Work with packaging operations suppliers and manufacturing partners to ensure design feasibility and high yield, • Collaborate with test and product engineering to support bring up qualification and debug Technical Ownership • Define substrate design guidelines standards and best practices, • Conduct design reviews and provide expert guidance on tradeoffs and constraints, • Create and maintain documentation including drawings BOMs and release files Analysis and Validation • Perform signal integrity power integrity and thermal simulations as needed, • Validate layout decisions with modeling and characterization data, • Support root cause analysis for substrate related issues in development and production Required Qualifications • Bachelor’s degree in electrical engineering, Mechanical Engineering, Materials Engineering or related field, • 5+ years of experience in substrate design or advanced IC packaging, • Strong expertise with substrate CAD tools such as Cadence Allegro or equivalent, • Deep understanding of high speed routing impedance control stackup design via structures and manufacturing constraints, • Knowledge of SI and PI fundamentals including loss crosstalk return paths and decoupling strategies, • Experience working with OSATs and substrate vendors Preferred Qualifications • Experience with advanced packaging technologies such as flip chip 2.5D 3D or chiplet architectures, • Familiarity with thermal modeling and materials selection, • Strong documentation and communication skills, • 100% Employer Paid Health Insurance (Medical, Dental, Vision), • Unlimited Paid Time Off, • Performance Bonuses, • Free Lunch Catered in by Local Restaurants, • Private Equity Options, • Retirement Plans, • Sabbatical Program, • Tuition Reimbursement, • Volunteer Days, • Relocation Assistance, • Conference Attendance Support, • Biweekly Phone Stipend

Job DescriptionPosition Summary The ICT Engineer contributes advanced technical expertise to the design and coordination of information and communication technology systems on complex projects. Operating with limited guidance, this role produces ICT design deliverables, resolves cross-discipline issues, and supports client communication. ICT Engineers at this level demonstrate strong technical judgment, contribute to quality efforts, and begin to take ownership of key project components, while still collaborating closely with senior staff for overall project direction. Essential Functions: • Develop ICT and security system designs for complex projects, producing calculations and documentation with limited supervision., • Manage Revit models and low-voltage system views to support project deliverables., • Perform and validate calculations for cabling distances, voltage drops, and equipment loads, applying results to project design decisions., • Resolve cross-discipline coordination issues in collaboration with architects, structural, and civil engineers., • Support site visits, field reports, punch lists, and construction administration activities., • Contribute to QA/QC processes by reviewing design accuracy and compliance with project standards., • Mentor junior staff on project tasks and workflows, with guidance from senior engineers., • Participate in technical meetings and client discussions, supporting senior staff in presentations., • Assist in proposal preparation and scoping efforts by providing technical input.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, or a related field, or equivalent experience., • Registered Communications Distribution Designer (RCDD) and/or PSP or CPP certification required., • 2–5 years of experience in ICT, Physical Security or low-voltage systems design within the AEC industry., • Familiarity with BICSI, EIA/TIA, NEC, and other applicable telecommunications standards., • Proficiency in Revit with experience producing and coordinating low-voltage design documentation., • Strong communication, problem-solving, and organizational skills.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.