Trabajos electrical designer en Chicago, IllinoisCrear alertas

The Controls Engineer serves as technical designer of software specialized in Mecalux Systems of Warehouses. This role is responsible for creating the programs in our proprietary Galileo and performing all the tests of controllers, inverters, and security systems to put the installation in service. Responsibilities: • Engage in proprietary software development by utilizing Designer AWS and Galileo to create warehouse solutions for customers and modifying these programs based off of the client need., • Create control programs using internal tools such as Designer AWS and Galileo by configuring the Profibus or Profinet network using Sycon.net software and using Sycon.net in addition to Galileo to perform all of the tests for the controllers., • Conduct installation startup by checking the Profibus/Profinet network by running diagnostic tests using programs such as Sycon.net, TIA Portal, Galileo, and Proneta. Validate wire connections, device addresses, input/output quantities, and signal quality., • Load control programs to the VFD control drive, operator panels, barcode scanners, and PCs., • Check that safety devices are properly installed and working using easySoft-Safety software and conducting physical inspections., • Delegate daily tasks to electromechanics assisting at the installation, ensuring they are completed properly and on time, reporting deviations to the Project Manager and Site Manager., • Assist Project Managers in determining the human resources demand for a project including duties and work schedules for electromechanics and electricians., • Commission the on-site control program by uploading proprietary software to the solution. Debug and troubleshoot on-site., • Collaborate with Project Manager and clients to ensure project is satisfying their needs., • Conduct training courses for customers. Train the customer’s maintenance and/or other personnel on how to properly operate Galileo software and HMI interfaces. Schedule trainings on site or virtually, accommodating customer’s availability., • Provide work progress reports to the department manager and Project Manager. Include updates on daily completed technical tasks and what is to be accomplished the following day in order to keep an accurate record of the project timeline and to prevent any delays in Minimum Requirements: • Bachelor’s degree in Engineering (electrical, industrial, or mechanical)., • At least 1 year of professional exposure to the field of Industrial Automation., • Knowledge of PLC, HMI and SCADA programming preferred., • C programming language knowledge preferred., • Ability to read mechanical drawings and electrical wiring diagrams., • Knowledge of Frequency Inverters parameterization and operation (preferable SEW and Lenze) preferred., • Knowledge of the Fieldbus networks (Profibus, Profinet, etc.) preferred., • Spanish fluency is ideal., • Personality: Candidates must be organized and methodical in their work, with the ability to learn quickly and adapt easily to change. Candidates must be able to persevere through difficult work challenges with the highest degree of dedication. Candidates must have strong interpersonal skills with the confidence to interact and communicate effectively with personnel from all levels of the organization. Ability to work under time pressure., • Able and willing to travel at least 50%. We offer: • Competitive compensation., • The ability to become a part of an industry-leading dynamic team with a high focus on delivering results and continuous improvement., • 401(k) plan through Fidelity, with a generous company match; 100% vested immediately upon contributing and no waiting period to start participating., • Paid Holidays and Paid Time Off with the option to cash out unused PTO every year., • Possibility for telework days, depending on position, with flexible make-up time for exempt employees., • Blue Cross Blue Shield medical insurance plans, along with dental and vision benefits., • Opportunities for career development and advancement; enhance your technical, specialized knowledge and gain new skills through promotions from within.

Description The Senior Controls Design Engineer is responsible for leading the design and development of complex HVAC/industrial control systems, with a strong focus on PLC logic design, HMI/SCADA architecture, and electrical control systems engineering. This role emphasizes upfront design, programming, and documentation using industry-standard platforms including Rockwell Automation, Emerson, GE, Schneider Electric, Ignition and others. The position requires strong understanding of systems, and a commitment to delivering high-quality design packages and control solutions. In this position your duties will include: • Developing PLC logic design and programming based on control narratives, sequences of operation, and project requirements., • Designing HMI/SCADA system architecture, graphics, and standards., • Creating and reviewing detailed electrical control schematics and panel designs., • Preparing design documentation including I/O lists, network architectures, control narratives, and bill of materials., • Supporting field activities such as commissioning, functional testing, and design validation., • Integrating systems using a wide variety of serial and Ethernet-based industrial communication protocols., • Leading and/or supporting Factory Acceptance Testing and design reviews., • Supporting proposal development, including reviewing plans, specifications, and scope documents., • Presenting technical designs and solutions to customers and internal stakeholders., • Preparing technical reports, and design deliverables. Position Parameters: This role requires approximately 30% national travel, including travel to client sites, regional offices, and project locations as needed to support business operations. • 7+ years of PLC/PAC logic design and programming experience using IEC-61131 languages., • 7+ years of HMI/SCADA system design experience, including multi-node or distributed architectures., • 5+ years of electrical design experience related to control panels and industrial automation systems., • Demonstrated experience with industrial communication protocols including Modbus TCP/IP, Ethernet/IP, PROFINET, and serial equivalents., • Strong written and verbal communication skills., • Bachelor’s degree in electrical engineering, Mechanical Engineering, Robotics, Computer Science, or related field; or equivalent demonstrated experience. Preferred Certifications (or willingness to obtain): • Rockwell Automation Certified Programmer or equivalent RA technical certifications (e.g., ControlLogix/Studio 5000)., • Siemens or Schneider Electric automation certifications., • ISA certifications such as ISA CAP (Certified Automation Professional)., • Ignition (Inductive Automation) Core or Gold Certification., • UL 508A Industrial Control Panel certification familiarity (designer-level knowledge)., • OSHA 10 or OSHA 30 safety certification. Salary Range: $140k - $160k/yr. DOE. Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionDescription: Job Description KDM Engineering is seeking a self-motivated designer who will prepare clear, complete and accurate detailed drawings using AutoCAD from field sketches, original drawings or satellite images, mark-ups, existing as-builts, site maps, photos, and field notes. The candidate will be designing drawings using AutoCAD applying engineering standards and specifications. It is expected that they will complete drawing packages in a timely manner using personal knowledge and exercising discretion and judgement to maintain a high level of quality, accuracy, and professionalism, and acute attention to detail. Salary Range: $80,000.00 - $100,000.00 per year Job Requirements • Associate of Applied Science degree (AAS) and Certification in AutoCAD or the equivalent education or experience., • Design knowledge of electrical utility and engineering is a plus, • Ability to communicate effectively and clearly, both verbally and in written form, • Comfortable in a self-directed environment, • Detail oriented, organized, able to multitask, prioritize and meet deadlines, • Be a self-starter, ability to perform duties with limited supervision and be a cooperative team player., • Versatility, flexibility, and a willingness to work within constantly changing priorities Primary responsibilities • Analyze client requests/engineering sketches, • Understand the use of Adobe Acrobat (pdf files), digital photographs (jpeg files), google earth, Microsoft Office products and internet search engines, • Scale engineering drawings using AutoCAD, • Calculating lay outs of right-of-way and/or street dimensions and angles, • Creating preliminary and/or final sketch of proposed drawings, • Modifying drawings based on engineer designs, • Creating as-build drawings upon completion of project, • Performing miscellaneous job-related duties as necessary Additional Requirements: • Must be willing to comply with all pre-employment screening, including but not limited to, drug testing, reference verification, education and employment verification, and background screening, • Must be legally authorized to work in the U.S., • Possess a valid Driver’s License Why Choose KDM Established in 2012 on a promise to alter the face of engineering, KDM Engineering has built a reputation of excellence in providing outstanding technical services, maintaining the highest standards of safety and quality assurance, and offering a truly inclusive work environment. Our clients and partners in the public and private sectors consistently recognize KDM for our responsiveness to their needs, budgets, and schedules. Our peers distinguished KDM with Edison Electric Institute's Diverse Supplier Award, Capital One and Women Presidents’ Organization’s (WPO) 50 Fastest Growing Women-Owned/Led Companies, and Chicago’s Best and Brightest Companies to Work For annually for seven years. Our talented, experienced team delivers exceptional engineering designs, project management, and customer support services to each of our projects. Our enduring commitment to diversity, equity, and inclusion is unmatched in our industry. Because our team comes from diverse backgrounds, cultures, and experiences, we bring uniquely different and diverse perspectives to solving complex engineering problems. Top Reasons to Work for Us: • Challenging and Meaningful Work, • Competitive Base Salary, • Comprehensive Benefits Package, • Company Paid Holidays, • Great Work-Life Balance, • Fun and Flexible Work Environment, • Organization with People-First Mentality, • Dynamic Leadership Team, • A Culture that Values Your Input Full List of Benefits & Perks: • Positive team environment, • Competitive salaries, • Flexible schedules, • Growth opportunities, • Training and professional development, • Health, dental, and vision insurance, • 401(k), • Life, long-term disability, and short-term disability insurances, • Paid time-off., • Paid holidays., • Volunteer leave, • HAS and HRA, • Transit program, • Sabbatical leave, • Parental and maternity leave, • Supportive management, • Professional development assistance, • Employee discounts, • Employee Assistance Program, • team-building outings, • Laidback office culture, including pool table, arcade games, and happy hour, • Meditation space, nap room, and nursing mothers’ room Equal Employment Opportunity: KDM Engineering strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law. KDM Engineering, what's next!kdmengineering.comRequirements:

Job DescriptionAbout Us Solar Landscape is the leading commercial rooftop solar developer in the U.S. Only 4% of commercial rooftops host solar today — we’re changing that, fast. Commercial rooftop solar is the fastest, smartest way to build new clean power — delivering megawatts of generation in months, not years, and powering America’s energy and future right where it’s needed most. By turning rooftops into local power plants, we’re reshaping how — and how fast — energy gets built in the U.S. Recognized as the #1 Distributed Generation Developer by New Project Media, the #1 National Commercial Rooftop Solar Developer by Solar Power World, and winner of the U.S. Department of Energy’s Grand Prize for Clean Energy, Solar Landscape is defining the future of energy generation in America. Headquartered in Asbury Park, New Jersey, Solar Landscape has offices in Chicago, Baltimore, and New York City and operates in over a dozen states nationwide. We move fast, solve hard problems, and take our work seriously — but never ourselves. We value clear thinking, accountability, and execution. At the same time, we’re collaborative by default, and believe the best work happens when people enjoy working together. Our team is made up of smart, grounded people who show up for each other — whether that’s troubleshooting a system design or catching up over lunch. If you’re looking to do meaningful work in a high-performance environment — and be part of the team reshaping how energy gets built in the U.S. — we’d love to meet you. About The Role We are seeking a Solar Project Engineer to join our dynamic team and contribute to the development and execution of high-quality solar energy projects. As a Project Engineer at Solar Landscape, you will be responsible for hands-on design and overseeing external consultant design development of Solar Photovoltaic systems. This is an excellent opportunity for an engineering professional passionate about renewable energy and innovative solutions. Responsibilities • Deliver design and problem-solving services that support project schedules to the assigned project teams., • Plan and lead the design development effort for all assigned project teams., • Support Design team as part of initial training process and where needed thereafter., • Oversee/Design/Support commercial and grid supplied Solar Photovoltaic systems., • Prepare technical drawings, specifications of PV systems to ensure that installation and operations conform to standards and customer requirements., • Conduct detailed site evaluations., • Coordinate with structural, electrical, geotechnical, and civil Professional Engineers during design process to assure the design meets technical and code requirements. Manage professional engineer review process to obtain PE stamps on drawing packages., • Provide technical support to Commercial Sales and Finance for the development of technical proposals and customer presentations., • Participate in meetings and technical presentations to customers, investors, and PV technical community., • Provide engineering/technical input and direction to site evaluation, interconnect agreements and other associated tasks., • Work with appropriate electric utilities to prepare and process interconnection paperwork., • Review specifications for purchases of materials or equipment., • Identify appropriate equipment for use in PV systems and perform technical qualification of vendors., • Support Project Management and construction team with ongoing technical support, RFI’s, and As-builts., • Review of other design engineers’ work during design phase., • Lead cross-functional design reviews., • Develop necessary customer deliverables such as concept module layouts, single line diagrams, equipment or material specifications, engineering validation, 3-D renderings, and photo simulations., • Assist with Request for Proposal (RFP) reviews, technical writing, and response coordination.Qualifications, • Bachelor’s degree in Engineering (Electrical, Mechanical, Structural, or Civil preferred)., • Proficiency in AutoCAD, SolarEdge Designer Tool, and MS Office Suite., • Experience in electrical, mechanical, structural, or civil engineering design., • Strong organizational, analytical, and problem-solving skills with the ability to manage priorities effectively., • Excellent verbal and written communication skills., • Ability to work independently and collaboratively in a fast-paced environment., • Acute attention to detail and strong judgment in decision-making., • Demonstrated ability to plan, organize, and execute projects effectively.Salary will vary depending on your location and job-related skills and experience. This is an incentive-based position with the potential to earn more. For part-time roles, your compensation will be adjusted to reflect your hours.Benefits and Perks We offer competitive compensation and benefits designed to support you inside and outside of work: · Training / Professional development opportunities · 401(k) with 4% company match· Summer Fridays· Flexible remote/hybrid work options· Paid parental leave· Team lunches, events, and stocked kitchens· Modern, collaborative office spaces in Asbury Park, New York City, Boston, Chicago, and Baltimore· Medical, dental, and vision coverage· Company-paid life and long-term disability insurance We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: $65,000-$85,000 Summary The Solar Designer is responsible for providing technical expertise for commercial solar installations, including solar rooftop, ground mount, and battery storage projects. You will collaborate with project managers and electrical foremen to drive the engineering process, identifying and solving issues to ensure the successful completion of each project. What You'll Do: • Review and generate technical drawings, ensuring accuracy and compliance with all codes and product requirements., • Oversee design sets through various stages (Interconnection, Permit, Construction) while coordinating with the design team to ensure accuracy at each phase., • Adhere to all relevant codes, including NEC, IFC, and IBC, throughout the design process., • Evaluate and recommend products (e.g., racking, inverters, modules) based on the projects needs and their potential impact on the overall design., • Meet with project managers and electrical foremen to assess scope and identify potential project obstacles. Proactively resolve issues during the project lifecycle. What You'll Need for Success: • Bachelors degree in electrical engineering is preferred, • Minimum 3+ years in the commercial solar field, with at least 3 years of professional experience in commercial electrical engineering and design., • NABCEP Certification is desired, • Strong understanding of solar photovoltaic, energy storage, and microgrid applications., • Proficient in AutoCAD and other BIM software., • In-depth knowledge of NEC, IFC, and IBC codes., • Familiarity with common solar energy and storage products., • Ability to read and create detailed engineering drawings., • Understanding of project schedules and timelines., • Excellent oral and written communication skills, along with proven organizational, analytical, and leadership abilities. Continental Energy Solutions (CES) offers end-to-end commercial renewable energy solutions. We design, engineer, procure, install, commission, monitor, and maintain solar arrays, solar plus battery storage, and full microgrid solutions. Our experienced team, including NABCEP Certified Professionals, plus our extensive project portfolio of both rooftop and ground mount systems for big-box retail, warehouse, and campus solutions have put CES at the top of our industry in the Midwest. Working for Continental Energy Solutions provides: • Assistance, tools, and resources for success, • A collaborative, engaging and respectful workplace, • Fulfilling career opportunities and skills development, • A value basedworking environment: E: EveryoneUnited N: Nurture Communication E: Enforce Accountability R: Relationships Matter G: Growth and Development Y: You Make the Difference Continental Energy Solutions offers a competitivesalarymay vary based on the scope and responsibilities of the role and the candidates relevant experience, education, and skills. We also offer a rich benefits program that includes medical insurance with a generous company subsidy and HRA; dental and vision; 401(k) with 100% match up to 5% of salary deferrals; profit sharing; retirement benefit; company-provided life and disability insurance; liberal paid time off including PTO, paid holidays, parental leave and volunteer time off; tuition assistance; Employee Assistance Program and company subsidized wellness . Continental Energy Solutions is an equal opportunity employer, and does not discriminate in employment on account of race, color, religion, national origin, citizenship status, ancestry, age, gender, gender identity, sexual orientation, marital status, pregnancy, physical or mental disability, military status or unfavorable discharge from military service, arrest or conviction record, source of income or credit history.

Job Description Title: Substation Designer Location: Chicago, IL Hire Type: Direct Hire Salary: $92K–$110K Benefits: Medical, dental, vision Sterling Engineering is looking for Substation Designers in Chicago, IL. This opportunity supports utility and infrastructure projects with a focus on design and drafting. Job Duties: • Analyze client requests and interpret engineering sketches, • Create and modify drawings using AutoCAD, • Develop preliminary and final design layouts, • Calculate right-of-way, street dimensions, and angles, • Prepare as-built drawings upon project completion, • Utilize tools such as Adobe Acrobat, Google Earth, and MS Office, • Support additional drafting and design tasks as needed Qualifications: • Associate’s degree (AAS) or equivalent experience, • AutoCAD Certification or relevant experience, • Up to 5+ years of related experience (flexible based on skill level), • Experience with electrical utility design is a plus, • Proficient in AutoCAD, Microsoft Office, Adobe Acrobat, and Google Earth Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin,

Job Description Electrical Designer - Mission Critical The Electrical Designer builds upon foundational experience to deepen technical capabilities and take greater ownership of assigned design work. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary Operating with increasing autonomy, this role is focused on the development of electrical design documentation, performing electrical calculations, and coordination across disciplines. The Electrical Designer contributes meaningfully to project execution and supports innovation through curiosity and collaboration within the team. This individual is engaged in developing a deeper understanding of electrical building systems and design tools and begins taking responsibility for portions of electrical design packages with guidance from project engineers. Essential Functions: • Produce the sheet list for projects, determine project sheet requirements and complete the project set up in Revit., • Participate in the completion of the BIM Project Execution Plan., • Participate in construction administration activities such as submittal reviews and develop RFI responses with supervision from lead engineer., • Collaborate with the project engineers on the required system components—such as panelboards, transformers, lighting control systems— coordinate with all impacted disciplines., • Primarily working in Revit, modeling electrical components and systems based on code and client requirements, as well as engineering guidance, • Produce redline markups for electrical drawings to delegate tasks to other team members., • Participate in mentorship relationships with all levels of engineers to understand and teach the “how” and “why” of engineering for the built environment., • Edit specifications, primarily Division 26, for project requirements alongside the project engineers., • Complete system sizing and energy code compliance calculations alongside the project engineers, including lighting power density, voltage drop, and fault current calculations., • Develop familiarity with code compliance and engineering best practices., • Check your work for graphical and technical issues to resolve prior to deliverable issuance., • Collaborate in the QAQC effort per HED’s Design Process, • Attend client and project team meetings alongside the project lead to review and coordinate project requirements., • Participate in coordination meetings and lead follow-up efforts to resolve action items., • Work with sub-contracted firm(s) to delegate workload, • Work in different sectors to gain experience as a generalist, • Engage in DWP process and estimate hours required to complete project tasks, • Manage assigned project hours for self-performed and delegated work. Requirements • Bachelor's degree in directly related field or equivalent experience required., • 2+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description Watch your engineering work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking an AutoCAD/BIM Digital Designer II - IV to join our team in Chicago, IL. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As a CAD/BIM Digital Designer II- IV, you will draft, convert, produce, and edit plans for drawings and other CAD/BIM generated products. Digital Designer responsibilities: • Produce setup drawings/sheets/views consistent with instruction, guidelines, and CAD/BIM standards., • Modify Architectural CAD/BIM files for use in MEP design drawings (clean-up, audit, reference, basic troubleshoot., • Draft/generate redlines for plans, diagrams, and schedule drawings in AutoCAD and/or Revit from redlined drawings, • Provide design assistance and calculations to Designers and Engineers, • Produce drawings/projects consistent with instruction, guidelines, and CAD/BIM standards, • Modify Architectural CAD/BIM files for use in MEP design drawings (clean-up, audit, reference, troubleshooting), • Review BIM models for coordination using Revit and Navisworks, • Support the BIM manager in setting up Revit templates, family creation, and staff support, • Prepare projects for client submissions, • Assist with the management of Revit files and projects Job Requirements This is a great opportunity for a CAD/BIM Digital Designer with experience working with AutoCAD and REVIT MEP. To succeed in this role, you will need effective organizational skills, the ability to prioritize workload and be a team player with strong communication skills. Additional requirements: • Associate's degree or completion of trade school or equivalent formal training, • 1 years to 10 years of working experience with an MEP firm in a CAD/BIM role, • Knowledge of drawings to understand red marks, • Able to read floor plans, sections, and elevations, • Possess basic drafting skills, • Experience with manipulating and receiving various file formats, • Available to work necessary hours in order to meet project deadlines, • Familiar with at least one: Mechanical, Electrical, or Plumbing trades, • Experience with the MS Office Suite, Adobe Acrobat, and Reader Benefits As a CAD/BIM Digital Designer with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership of their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group – Creating Exceptional Environments Let's Work Together! The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. Chicago Pay Range$51,786—$93,991 USD

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking an Electrical Engineer III - IV to join our Chicago, IL office. As a Supervising Engineer, you will be responsible for representing the Firm in all interactions with clients, contractors, architects, and other project team members. You will be responsible for supervising, coordinating, and assigning various projects to be performed by the team. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As an Electrical Engineer III, you will be responsible for providing trade-specific system design: layout, calculations (utilizing appropriate software), and coordination with the designs of other trades (architectural, engineering / internal, and external) Additional responsibilities include: • Participates in various trade organizations and prepare presentations., • As appropriate, manages CAD/BIM and other technical staff that is assigned for particular project or task as directed by the senior engineer and/or senior designer., • Assists with employee reviews as requested., • Estimates construction costs and to evaluate feasibility of construction using ROM (Rough Order of Magnitude), • Writes engineering proposals under the direction of a senior engineer or senior designer for projects Job Requirements Someone with a history of working with Critical Facilities projects would be a good fit for this dynamic role. Additional requirements include: • Bachelor's degree from accredited university in Mechanical, Plumbing or Electrical discipline is required., • 3.5+ to 7+ years of relevant experience in the MEP field, • EIT certification is required, • PE is preferred or alternate certification (Plbg – CPD, BMS – CEM, FLS – NICET & NFPA)., • Demonstrates ability to make proper system selections with/without supervision of senior designer/senior engineer., • Demonstrates ability to understand the work of the other trades., • Exhibits thorough understanding of applying LEED principles to building design., • Possesses expertise in trade specific design and calculation software., • Possesses good dispute resolution skills., • Possesses sufficient knowledge to prepare red marks for CAD personnel to pick-up knowledge to read, review and evaluate floor plans, sections and elevations and visualize three-dimensional space in building construction. Benefits As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we have cultivated a community that supports learning and provides guidance for professional development and furthers our culture of excellence. We promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership of their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. Chicago Pay Range$78,853—$116,279 USD

Job Description Growing firm with offices in multiple states is seeking an I & C Designer/Engineer for their team in Chicago! Responsibilities: • Responsible for design, development, and implementation of control systems for water/wastewater treatment facilities, • Work closely with multidisciplinary engineering teams to ensure all systems meet the required specifications/quality standards, • Create electrical drawings/schematics using AutoCAD, • Ensure all projects meet safety and quality standards Requirements: • Bachelor’s degree in electrical engineering, automation, or a related field, • 5+ years of experience in designing/implementing control systems, • Proficient in AutoCAD Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job DescriptionDescription: 2026 Summer Internship Grow your expertise, skills, and experience through the KDM Engineering 2026 Internship Program. KDM is a growing, award-winning, minority- and woman-owned professional engineering firm focusing on electric, gas, site civil, and telecommunications engineering designs and support services. KDM Engineering provides a one-of-a-kind, client-recognized training and mentorship program. We give our new recruits the opportunity to become effective and knowledgeable engineers at a much faster pace than our competitors. Interns will be exposed to multiple departments and projects through our hands-on learning approach. What you will learn: Engineering Internship After on-site training, our Interns will be exposed to and able to create detailed designs of mid voltage distribution projects up to and including 34kV. Candidate will interface closely with client and utilize company, OSHA, and IEEE standards to facilitate design projects. Distribution projects may include but will not be limited to 4 to 12kV conversions, Overhead to Underground conversions, smart grid, cable, and conduit design. You will be working closely with other engineering and design team members to coordinate overall design basis, providing direction and guidance to drafters and designers, directing the flow of drafting and designer duties, ensuring design schedules are met, including regularly providing project status updates to project engineer. Interns are expected to work to develop advanced skills, and work both independently and within a team. Qualifications • Actively enrolled in an accredited Electrical Engineering or related Undergraduate Program or Master’s program., • We’re ideally looking for students currently in their Sophomore or Junior year College, • Demonstrate interest in infrastructure or related field., • Competent interpersonal and communication skills, • Basic proficiency with office software, spreadsheets, technology, and tools backgrounds • Internship length: 1 year- We are looking for interns who can commit to the program for at least 1 year., • Summer schedule: Part-time, 3- 4 days a week in person, • Once school starts, we will accommodate their class schedule, • Expected start date: around mid-June, • Primary location: 550 W Jackson Blvd., FL11, Chicago, IL 60661, • Salary Range: $16 - $21 per hour., • Authorization to work in the United States at the start of the internship., • Must be willing to comply with all pre-employment screening, including but not limited to, drug testing, reference verification, education and employment verification, and background screening Why Choose KDM? Established in 2012 on a promise to alter the face of engineering, KDM Engineering has built a reputation of excellence in providing outstanding technical services, maintaining the highest standards of safety and quality assurance, and offering a truly inclusive work environment. Our clients and partners in the public and private sectors consistently recognize KDM for our responsiveness to their needs, budgets, and schedules. Our peers distinguished KDM with Edison Electric Institute's Diverse Supplier Award, Capital One and Women Presidents’ Organization’s (WPO) 50 Fastest Growing Women-Owned/Led Companies, and Chicago’s Best and Brightest Companies to Work For annually. Our talented, experienced team delivers exceptional engineering designs, project management, and customer support services to each of our projects. Our enduring commitment to diversity, equity, and inclusion is unmatched in our industry. Because our team comes from different backgrounds, cultures, and experiences, we bring uniquely different and diverse perspectives to solving complex engineering problems. Top Reasons to Work for Us: • Challenging and Meaningful Work, • People-First Work Environment, • Dynamic Leadership Team, • A Culture that Values You, • Our Motto: We Work Hard to Play Hard, • Positive team environment, • Training and professional development, • Supportive management, • Laidback office culture, including pool table, arcade games, and happy hour, • Meditation space, nap room, and nursing mothers’ room Equal Employment Opportunity: KDM Engineering strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law. KDM Engineering, What's Next!kdmengineering.comRequirements:

Job Description Electrical Designer - Healthcare Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Healthcare facilities, with knowledge of California building codes, OSHPD/HCAI requirements, and energy efficiency standards. This role also involves collaborating with architects, project managers, and contractors to design, specify, and deliver reliable electrical systems that meet the unique needs of Healthcare environments. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a high-level technical role responsible for driving electrical project delivery and engineering quality across large and complex projects. This individual is an electrical system expert, Revit authority, and go-to mentor within the discipline. They are expected to guide project teams through all design phases, resolve complex coordination challenges, and ensure quality and consistency across documentation. The Electrical Designer serves as a bridge between technical execution and strategic planning and is expected to influence standards, coach team members, and represent the firm in advanced technical discussions with clients and consultants. Essential Functions: • Lead the production and coordination of full electrical design packages for large-scale or highly complex projects., • Standardize Revit workflows across teams and lead development of firmwide modeling resources, families, and templates., • Resolve advanced technical modeling challenges and mentor staff in efficient BIM strategies for electrical systems., • Review and approve project documentation for compliance with code, performance objectives, and client requirements., • Author and edit electrical project narratives, design briefs, and owner-facing documents with minimal oversight., • Integrate multiple complex systems across disciplines; resolve electrical system conflicts with other discipline teams., • Perform advanced electrical system analysis, including lifecycle assessments, decarbonization strategies, and code interpretations., • Lead project lighting simulation or energy modeling coordination to inform electrical system decisions., • Develop and implement firm tools for electrical load calculations, system sizing, and code compliance checking., • Define project design strategies, workflows, and milestone deliverables in collaboration with engineers and project managers., • Independently scope and plan project phases, including resourcing and delegation across disciplines and offices., • Ensure technical delivery aligns with project budgets, schedules, and quality expectations., • Provide cross-project mentorship in system design, QAQC strategies, and advanced documentation techniques., • Guide emerging designers and engineers in technical decision-making and problem-solving approaches., • Develop structured onboarding or training content for new electrical staff or designers., • Model team collaboration and delegate electrical design work strategically to grow others’ confidence and capability., • Lead technical segments of client and consultant meetings related to electrical systems, including design presentations and technical decision-making forums., • Communicate clearly and confidently about technical decisions, trade-offs, and performance metrics with diverse audiences., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Influence client and project partner expectations around technical scope, documentation quality, and system performance., • Travel to client meetings, existing buildings or construction sites on occasion (Local - once per week during certain phases of a project, overnight - once or twice per month). Requirements • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Familiarity with California HCAI/OSHPD agency, processes and requirements preferred., • Experience with Kaiser Permanente projects preferred., • 10+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionSalary: $80,000-$130,000 Summary: The VDC Modeler II assists the Field Design Lead and Electrical Systems Designer by following BIM Manager-established standards and workflows for electrical commercial construction projects. The VDC Modeler II will design electrical layouts, create and place annotations, manage sheets and revisions, plotting, and export views and sheets. What youll do: Layout of Electrical Systems Create electrical room layouts Develop homerun schedules and layouts Review single line / riser drawings Design large conduits & all raceways for power and low voltage systems Create families and project content to be used in models by VDC modelers Create shop drawings Review and set up detailed shop drawings for prefabrication and field installation. Create drafting views and detailed drawings. Maintain project drawings and details through addendums, bulletins, and updates. Produce and manage record drawings. Model Designs Review equipment submittals for modeling and manage project templates, blocks, details, and plotting standards. Perform daily model management, including administration and maintenance. Model designs in AutoCAD or Revit according to job specifications. Update models with coordination changes and reflect as-built conditions for record-keeping. Communicate with field and other trades for BIM process Participate in coordination meetings and document changes and action items. Communicate with team members outside of meetings as needed. Technical Software Knowledge Develop relationships with BIM/VDC software vendors. Create training guides for software used by field and office teams. Provide training on VDC software for field and office personnel. What youll need for success: Associates degree in engineering or electrical design. • A minimum of 5 years of experience in commercial electrical construction and designing electrical systems with AutoCAD and/or Revit. Ability to independently design electrical room layouts and understand project schedules, electrical risers, and system layouts. General construction knowledge, capability to read manufacturers shop drawings, and equipment cut sheets. Willingness to travel 15% to local job sites. Founded in 1912, Continental Electrical Construction Company is the number one electrical construction company in Chicago and its suburbs, as well as one of the largest in the Midwest. Dozens of landmark structures bear our imprint. From high rises to health care facilities, factories to financial centers, data centers to educational facilities, hotels to recreational and shopping centers, Continental satisfies all electrical construction needs. Working for Continental Electrical Construction provides: Assistance, tools, and resources for success A collaborative, engaging, and respectful workplace Fulfilling career opportunities and skills development A values-based working environment: E: Everyone United N: Nurture Communication E: Enforce Accountability R: Relationships Matter G: Growth and Development Y: You Make the Difference Continental Electrical Construction offers a competitive salary that may vary based on the scope and responsibilities of the role and the candidates relevant experience, education, and skills. We also offer a comprehensive benefits program including medical, dental, and vision insurance; 401(k) with company match; profit sharing; retirement benefits; company-provided life and disability insurance; generous paid time off; paid holidays; parental leave; volunteer time off; tuition assistance; Employee Assistance Program; and company-subsidized wellness programs. Continental Electrical Construction is an equal opportunity employer and does not discriminate in employment on account of race, color, religion, national origin, citizenship status, ancestry, age, gender, gender identity, sexual orientation, marital status, pregnancy, physical or mental disability, military status, arrest or conviction record, source of income, or credit history.

Job Description Allen + Shariff is an international MEP engineering firm providing consulting and design services from four locations in the United States and project management services in the Middle East. Our mission is to engineer an exceptional level of personal care and connection designed to help our clients, employees, and communities thrive. We have fun at work doing what we love to do and are proud to be certified as a “Great Place to Work.” A+S is seeking an experienced and responsible Electrical Engineer to join our team. The Engineer will work independently on multiple concurrent projects, both in design and construction, and be responsible for the preparation of contract documents and specifications for complex building systems. This encompasses advanced calculations, systems analysis, quality control of finished projects, and field/construction coordination activities. Responsibilities • Perform full design of lighting, power, and fire alarm systems, including full equipment selection, for all size projects., • Analyze system options and evaluate existing systems where appropriate., • Coordinate all aspects of project document completion within A+S and externally with clients., • Complete full design in accordance with code. Production is performed using AutoCAD & Revit depending on preference of architect., • Write specifications., • Provide bid and construction phase services including reviewing bids, answering RFIs, reviewing shop drawings, participating in project walk-throughs, and providing field observation reports., • Must be proficient in building electrical systems and shall be considered a technical expert and resource to the office. Requirements • Bachelor’s degree in Electrical Engineering or Architectural Engineering with an electrical focus., • At least 6 years of relevant experience (Chicago experience preferred)., • PE certification preferred., • CAD & Revit proficiency. #LI-Onsite Benefits · • Bonus Pay, • Generous Paid Time Off, • Employee Referral Program, • Medical Insurance, • Flexible Spending Account, • Health Savings Account, • Employee Assistance Program, • Dental Insurance, • Vision Insurance, • Life Insurance, • Short & Long-Term Disability Insurance, • 401(k) Plan with Company Matching, • Tuition Reimbursement Program, • Professional Development Assistance, • Paid Pregnancy Leave, • Paid Parental Leave

Job Description ICT Designer - Mission Critical HED is looking to add a talented person to our ICT team. The ICT Designer builds on foundational design knowledge to contribute to the execution of complex mission critical technology infrastructure projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role emphasizes developing expertise in systems such as structured cabling and security while deepening coordination capabilities and technical acumen. Essential Functions: • Model ICT system components in Revit including pathways, outlets, equipment, and devices based on code, client requirements, and engineering guidance. Assist in developing project documentation including floor plans, riser diagrams, and device schedules. • Perform basic calculations for conduit fill, cabling distances, and equipment loads with limited oversight., • Collaborate with project engineers and architects to coordinate technology system layouts with building design., • Contribute to redline markups and assist in delegating documentation tasks., • Participate in QA/QC reviews and resolve technical or graphical issues in documentation., • Review and edit specifications under the guidance of project engineers., • Attend project meetings and site visits to support coordination and client interaction, • Manage assigned project hours and report progress to team leads., • Engage in HED’s Design Work Planning (DWP) process and estimate time required for task completion.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2+ years of experience in technology infrastructure design or a related AEC discipline is required., • RCDD certification is greatly preferred., • Proficient in Revit; experience with AutoCAD, Bluebeam, and Microsoft Office., • Familiarity with standards such as BICSI, EIA/TIA, and NEC., • Strong organizational and communication skills., • Self-motivated with a collaborative mindset and enthusiasm for innovation.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities.Work Environment We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture. The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

Rewst is a tool designed for Managed Service Providers (MSPs) to streamline and automate their processes, saving valuable time and effort.Our platform helps MSPs achieve big automation wins, resulting in increased productivity and efficiency.We value the flexibility of remote work and enjoy opportun

Veeva Systems is a mission-driven organization and pioneer in industry cloud, helping life sciences companies bring therapies to patients faster.As one of the fastest-growing SaaS companies in history, we surpassed $2B in revenue in our last fiscal year with extensive growth potential ahead.At the h

We offer breakthrough tech solutions and have worked with companies, hospitals, universities and government organizations.A proven partner with a passion for client satisfaction, we combine technology innovation, business process expertise, and a global, collaborative workforce that exemplifies the

Bachelor's degree in Electrical Engineering, Computer Science, or equivalent practical experience.

This role is a common entry point from the Designer path. Designers build engineering, production, and project management capability before participating in a TEECOM Grow career development discussion to determine long-term path alignment.

Are you a Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We develo

As an employee-owned company, Providence Engineering’s benefits and perks are designed to foster a rewarding work/life balance and truly support our employee-owners throughout their career.Employee Stock Ownership Plan (ESOP).Providence is 100% employee owned.Our ESOP serves as a retirement plan f

We specialize in solving complex problems through website and web app strategy, design, and development using open-source content management systems (primarily Drupal and WordPress, and headless or composable architectures).Our clients include some of the most well-known museums, nonprofits, univers

That is, a love for people, for improvement, for human advancement through information technology.We are a people-centered business with a desire to serve others.We are diverse and unified; creative and collaborative; a collection of complementary, not competing talents.And though on the surface we

Möchtest Du die Arbeitswelt von morgen mitgestalten und dabei helfen, dass Gebäude nachhaltiger und effizienter werden? .Als Quality Assurance & Test Engineer (m/w/d) bei Thing-it wirst Du Teil eines stark wachsenden jungen Tech Unternehmens und hilfst uns, unsere Produktqualität, System Perform

Founded in 1952 and formerly known as Heery International Inc.United States as part of Turner & Townsend.It specializes in project and program management for public sector organizations, with industry-leading experts in corporate, cultural, healthcare, justice, sports, K-12 education, higher educati

Flock Safety is the leading safety technology platform, helping communities thrive by taking a proactive approach to crime prevention and security.Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public-private safety network.Tr

Customer Success Project Manager.LiveData | Remote, United States (Eastern Time preferred) | Full-Time.LiveData is a healthcare technology company automating clinical and operational workflows across Electronic Health Record (EHR) systems.Our engineering team treats AI coding assistants as standard

We are driven to always be the firm of the future, to challenge the status quo, and to provide holistic business solutions to our clients in new and innovative ways.We are the world's largest global law firm, with 12,000+ people across 80+ countries.Driven by the diverse perspectives of our people,

Kasisto is seeking a skilled and versatile Technical Project Manager to work with customers on the implementation of agentic applications for financial services.This role will include extensive customer communications as well as development of tools to accelerate implementation and integration with

MicroHealth is seeking a Technical Project Manager to provide critical PMO and Technical Project Management support for the Department of Veterans Affairs (VA) within the BAM PMO TMS project.The Technical Project Manager will work directly with VA government product managers to oversee Agile

While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to fumes, airborne particles or electrical hazards. Electrical Control Engineer Dallas, NC. Experience level: Mid-senior Experience required: 10 Years Education level: Associat

This program provides IT services focused on building, securing, and operating the Department of Veteran Affairs LGY’s home loan product-line technology.The contract’s purpose is to modernize and sustain critical home loan technology systems that support LGY’s delivery of mortgage-related serv

Reporting to the Vice President of Engineering, this role functions as both a hands‑on technical contributor and a team leader, responsible for driving timely, high‑quality delivery of multidisciplinary engineering work, including; civil, structural, mechanical, instrumentation, and electrical,

Are you looking for your next challenge? Are you ready to work with a performance-based small company? At Zantech, we are a dynamic Woman Owned Small Business focused on providing complex, mission-focused solutions with a proven track record of outstanding customer performance and high employee sati

Prowess Consulting is a consulting firm that specializes in helping the largest enterprises in the technology industry define, manage, benchmark, and market their solutions and services.We take great pride in investing the time and effort to gain a deep understanding of our clients’ technologies,

Bachelor’s degree in Mechanical, Electrical, Software, Robotics, Automotive Engineering, or related field (Master’s preferred).

The Autonomous Vehicle (AV) Test Engineering team at Motional is responsible for validating the safety, functionality, and performance of our self-driving technology through rigorous, system-level testing.As a Senior AV Test Engineer, you will take a lead role in the strategy, planning, and executio

Prowess Consulting is a consulting firm that specializes in helping the largest enterprises in the technology industry define, manage, benchmark, and market their solutions and services.We take great pride in investing the time and effort to gain a deep understanding of our clients’ technologies,

Veeva Systems is a mission-driven organization and pioneer in industry cloud, helping life sciences companies bring therapies to patients faster.As one of the fastest-growing SaaS companies in history, we surpassed $2B in revenue in our last fiscal year with extensive growth potential ahead.At the h

HHAeXchange is the leading technology platform for home and community-based care.Founded in 2008, HHAeXchange was born out of an idea to create a fully comprehensive end-to-end homecare solution to help people who are aging or have disabilities thrive in their homes and communities.Our employees are

Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program.Employee Resource Groups and Programs offered include the Young Professionals Group

Are you a Senior Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We

We are a diverse team that is united by this common purpose and we are hiring the world’s best engineers, scientists, designers, product managers, operations experts, and customer service and business professionals. Engage in cross-functional collaboration to support all engineering efforts (elect

Veeva Systems is a mission-driven organization and pioneer in industry cloud, helping life sciences companies bring therapies to patients faster.As one of the fastest-growing SaaS companies in history, we surpassed $2B in revenue in our last fiscal year with extensive growth potential ahead.At the h