Electrical designer jobs in Tampa, FloridaCreate job alerts

Emerald Engineering is seeking a Mechanical Designer or Engineer to join our growing Tampa team. This role is ideal for someone with hands-on HVAC production experience in healthcare environments who enjoys turning design concepts into coordinated, buildable systems. If you have experience designing HVAC systems for hospitals or other healthcare facilities and are comfortable working in Revit and AutoCAD, we want to hear from you! About the Role In this role, you’ll contribute to the design and production of HVAC systems for healthcare facilities, working alongside our talented team of designers and engineers to develop coordinated construction documents. You’ll participate in projects from early design through construction documentation, assisting with system layouts, equipment selection, and multidisciplinary coordination to ensure projects move forward efficiently and accurately. What You'll Bring to Emerald • 3+ years of experience in mechanical design or engineering, with a focus on HVAC production for healthcare facilities, • Strong proficiency in Revit and AutoCAD for mechanical system design and production, • Familiarity with healthcare ventilation standards and design considerations, including pressure relationships and critical airflow requirements, • Experience assisting with HVAC equipment selection and system layout for healthcare environments, • Experience coordinating mechanical systems with architectural, structural, and MEP disciplines, • Strong attention to detail and a production mindset, with the ability to keep projects moving forward on schedule, • Clear communication and collaboration skills when working with engineers, designers, and multidisciplinary project teams What You'll Get From Emerald • Annual bonuses, • Generous PTO + a paid Winter Break closure in December, • Employee-only premiums covered at 100% for select medical, dental, vision, short-term disability, and life insurance coverages. Additional benefit plans are available to support you and your family's well-being., • 401(k) retirement plan with company contribution, • A hardworking but relaxed and collaborative environment, • Development and growth opportunities, • Monthly team building activities A Little Bit About Emerald Founded in 2007, Emerald is a privately held consulting engineering firm based in Tampa, FL, providing comprehensive mechanical, electrical, plumbing, fire protection, and telecommunications engineering services. We handle hundreds of diverse projects annually across the United States, ranging from minor renovations to large-scale new constructions, with specialties in areas like healthcare, higher education, hospitality, and high-rise developments. Our team is made up of a diverse group of professional engineers, degreed engineers, designers, and support staff, holding licensure in numerous states. Joining Emerald Engineering means becoming a key player in our continued growth, with ample opportunity to make a tangible impact on both our diverse projects and our people. This is a salaried position offering the chance to work in a supportive and engaging environment where your expertise genuinely helps shape our future. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently looking for a BIM Technician to be based out of Tampa, FL reporting to the Drafting Manager. This person will be responsible for working with the project team to develop accurate and complete modeling drawing sets. The BIM Technician will ensure the integrity of project drawings while maintaining privileged information per the customer and company requirements. What you'll do: • Accurately identify product specifications and understand of detail assemblies and their application for installation., • Create or revise/update construction drawings, maintaining a tracking log of drawings., • Review drawings for accuracy and scope of work, ensuring quality of final drawings., • Collaborate with team and customers to ensure that projects are successfully completed, and best practices/technical issues are addressed., • Run the multi trade coordination for clashes to assist project team with the design process., • Conduct clash detection and visual walkthroughs using Navisworks Manage., • Research ways to continuously improve our process including providing insight into new time saving methodologies and best practices., • Bachelor's (preferred) or Associates Degree in Architecture, Engineering, and Construction (AEC) related field with 1 to 3 years of industry experience., • 1+ years' experience in 3D Revit or 3D AutoCAD., • Technical certificates in Drafting and ED BIM Modeling training (preferred)., • Experience with Autodesk Revit, CAD, and BIM procedures (Preferred)., • Familiarity with Overhead coordination process including 3D Modeling utilizing Revit in project environment, Project As-builts and turnover for Facility management., • Complete the onboarding material and training on companies' products and drafting processes., • Collecting information from multiple plans and incorporating them into a model which can be used to build structural support., • Produce 2D shop drawings and 3D models projects with assistance of PM and BIM Designer., • Communicate effectively with PM's and other team members in order to gather the information needed for each project., • Develop strong knowledge of the companies' products and produce accurate designs based on each project needs., • Produce structural models and drawings using Revit and manage coordination projects., • Manipulate and develop CAD library components for AutoCAD and Revit or other related software. With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions. Join our team and align yourself with an industry leader! Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Salary: $70,000 - $90,000 per year A bit about us: We are a growing Engineering firm looking to add a Electrical Revit Designer to our already established team! Why join us? Great pay/benefits! Room for upward mobility! Flexible hours! Job Details Job Details: We're on the hunt for a talented and ex

Job Description Be a Star at the Straz Center for the Performing Arts! Straz Center for the Performing Arts is seeking a Technical Director - Opera & Internal to join our production team. This position oversees all aspects of the technical production related to Opera Tampa events and Straz produced events. The Technical Director will also serve to advise and supplement planning operations for internal Straz events, including fundraising events. Located in downtown Tampa, the 335,000 square-foot Straz Center, one of the largest performing arts complexes in the country, offers a team-based work environment that shows our dedication to the community every day. We reward our full-time employees with a strong benefits package including options for health/dental, vision, etc., discounted downtown parking, food and show discounts, plus a generous 403(b) plan and up to 27 days of PTO/Holidays per year. Essential Functions: Opera Tampa and Straz Produced Events • Oversees the planning, scheduling, implementation, and engineering of all scenic elements; collaborates and coordinates with lighting, sound, and production departments to facilitate purchasing and planning., • Creates detailed material and labor cost and builds schedules for each production, working closely with designers, Senior Director of Production, and stage directors to establish build priorities. Schedules and moderates all design meetings, production meetings, technical rehearsals, and performances., • Actively participates in budget planning for current and future seasons., • Oversees construction, load ins, and load outs of scenery and set pieces. Provides additional construction support as needed., • Maintains inventory control of Straz assets and stock scenery pieces., • Works closely with guest designers to leverage stock pieces to the greatest extent possible to minimize cost and redundancy., • Reviews, evaluates, and coordinates all Opera Tampa and Straz Produced production requirements., • Researches and recommends rental set and costumes options., • Compiles all relevant regulatory and insurance related documents for rental vendors., • Recommends Lighting Designers and oversees the installation of lighting plot., • Recommends Wig and Makeup Artists, Production Stage Managers, and Assistant Stage Managers., • Compiles, orders, or oversees the construction of all required props for Opera Tampa and Straz Produced productions., • Partners with Lighting Designer, Center's Master Electrician, and Head Carpenter to determine the hanging plot and positioning of the set on stage., • Compiles or creates all required drawings associated with scenic layouts and design documentation to facilitate the rehearsal process and scenic construction processes. Responsible for the procurement and collation of all shop drawings., • Orders supplemental lighting equipment in coordination with the Lighting Designer, as required by production., • Coordinates orchestra pit setup with the Pit Orchestra Contractor and Artistic Director., • Schedules Fire Watch if warranted by special effects., • Oversees the overall safety of the production to ensure safe, organized, and efficient working conditions; communicates and implements Straz Center's standard operating procedures as they relate to safety, evacuation procedures, crisis communication, and security., • Determines necessary alterations or additions to production elements to meet artistic vision., • Supervises and coordinates all aspects of production on events, including compliance of the technical rider, as contracted., • Acts as Stage Manager when necessary., • Serves as liaison between visiting production personnel and Straz Center's technical, house, and Security staff members., • Ensures that visiting Company's production needs are understood and fulfilled to the best of Straz Center's ability., • Compiles and delivers production settlement information., • Assists in producing weekly schedules for production crews., • May temporarily perform some duties as Senior Director of Production, if necessary, in their absence., • Outstanding interpersonal and organizational skills as well as a meticulous attention to detail., • An industrious work ethic., • A high level of computer proficiency, including the MS Office suite., • An ability to work independently, under pressure in a multi-task environment, and as a dynamic and supportive part of a team., • Experience drafting, editing, reading, and interpreting lighting plots, ground plans and construction drawings., • Experience implementing technical riders, providing scrutiny and negotiation of production elements requested., • Design knowledge in CAD, Vectorworks, or other design programs is an added asset for this position., • Must have a valid Florida Driver License., • Bachelor's degree or equivalent work experience in the industry. The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. • The nature of this job requires the employee to work on-site as a regular work routine., • Work may require moving event materials or theatrical equipment weighing up to 40 lbs., • Work regularly requires traversing the facility; approximately 50% of performance facility is reachable only by stairs or ladder., • Work regularly requires ascending and descending narrow ladders between floors backstage., • Ability to identify visual and auditory difficulties occurring during events/productions., • Some work may be completed in low light areas and/or areas of restricted access., • May operate electrical or sound equipment. The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. • The noise level in the work environment is usually moderate to high. The David A. Straz, Jr. Center for the Performing Arts, Inc. is an equal opportunity employer committed to being an inclusive workplace and strongly believes in the importance of having a diverse group of individuals represented. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, sexual orientation, age, disability, gender identity, marital or veteran status, or any other protected class. Please visit our website at to learn more about the Straz Center. Job Posted by ApplicantPro

Job Description BIM Designer Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders and communities are building better together - a future focused on serving customers and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently looking for a BIM Designer to be based out of Addison, IL or Tampa, FL. Reporting to the Drafting Manager, this person will be responsible for developing complete system designs in CAD or Revit for customers. Applicants must be authorized to work in the US without requiring sponsorship now or in the future. What you'll do: • BIM Modeling, Clash Detection, Design, and Drafting., • Coordinate and Manage Revit Models., • Create/ Modify/ Update Revit Families., • Provide prompt and accurate progress status reports on a regular and consistent basis to supervisor and project team members., • Review all work for errors and mistakes prior to releasing as complete., • Create, maintain, and follow standard work/ check lists to ensure consistency and quality of work on every project., • Identify training opportunities and areas for improvement based on day-to-day experiences and exposure to various projects., • Develop complete system designs in CAD or Revit for customers., • Independently execute assignments and accurately identify product specifications., • Applicants must be authorized to work in the US without requiring sponsorship now or in the future., • AS, BS or MS degree in Engineering (Mechanical, Electrical, Computer Science), Architecture or similar building design profession., • 2+ years of professional Revit experience, • 2+ years of Navisworks experience., • Experience in a construction environment and/ or Structural or MEP industry preferred., • Knowledge of basic construction processes/ procedures, specifically overhead systems., • Capability to read and understand construction drawings and details., • Ability to manipulate and adapt files created by others., • Experience with Microsoft Office and BIM 360., • Extensive knowledge of current AutoCAD Navisworks, and Revit software., • 3D Model Quantity Extraction and 4D Scheduling using Navisworks., • Communicate effectively with PM’s and other team members to gather information needed for each project., • Creating BIM models via Revit Software using the companies’ products and libraries., • Set up linked models from different practices and coordinate companies’ models across other disciplines., • Independently handle BIM project from start to finish by assisting to BIM Coordination and providing daily management of BIM project data., • Perform clash Detection when needed and resolving coordination issues., • Provide BIM training internally to existing team members and new hired and offer cross-team support, • Responsible for organization wide BIM standards, implementation, and enforcement of best practice Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $63,000 - $87,000. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications are being accepted on an ongoing basis. #LI-KB1

Job Description Hazen and Sawyer is seeking a CAD/BIM Designer to join Hazen’s HVAC/Plumbing group. The candidate will work with project lead engineers to produce BIM (Revit) models, families, and contract drawings for the HVAC/Plumbing discipline. The ideal candidate is a team player and self-starter with exceptional organizational skills and has the ability to work independently, as well as in a team environment. The candidate must be detail oriented and have good communication and interpersonal skills. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Preparing plan, section, isometric, and detail drawings for various HVAC/Plumbing systems., • Coordinating with the other disciplines (Structural, Architectural, Process Mechanical, Electrical, I&C, Site Civil) regarding the HVAC/Plumbing design, • Performing BIM model clash detection., • Ensuring HVAC/Plumbing models meet Hazen design standards., • Ensuring compliance with the established Hazen and/or client CADBIM standards., • Providing input on CAD/BIM standards and workflows., • Minimum 2 years’ experience using Revit., • Proven proficiency in Revit and knowledge in design drawing production., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Embedded Electronics Engineer Tampa, FL Company Overview Detect-ION is a deep-tech startup founded in 2021 and develops next generation sensors for enhanced CBRNE (Chemical, Biological, Radiological, Nuclear, Explosives) awareness for a broad range of applications including, but not limited to, environmental monitoring, biomedical/health sciences, warfighter protection, situational awareness, and national defense/security. The Detect-ION team has a collective 75+ years of contract research and development experience, and through several recent prestigious DTRA, IARPA, DARPA awards, has developed several disruptive sensor technologies for a broad range of high-value chemical/biological sensing applications. Detect-ION develops sensors and systems in a dedicated 4000 sqft laboratory space located in Tampa, FL. We thrive in solving hard, high-value detection problems that require a multidisciplinary effort at the intersection of organic chemistry, biochemistry, gas chromatography, mass spectrometry, vacuum technology, data analytics, system engineering and AI/ML algorithms to produce the most pioneering sensing capability driven by mission-specific requirements from the US government and the industry. As a recent startup, Detect-ION is built on an agile and enthusiastic sponsored research and development model to continue to serve our US government stakeholders and clients, while we explore commercial markets for our maturing technologies. We thrive on efficient project execution through astute scientific problem-solving experience and diligent program management and risk mitigation ensuring the highest ROI to our clients. Position Overview Detect-Ion is seeking a seasoned Embedded Electronics Engineer (EEE) to join our scientific and system engineering team to support the development of next generation chemical-biological detection technologies. The position will be part of a highly coordinated technical team of research scientists, engineers and program managers working on innovative R&D projects for the US government and commercial stakeholders. The projects range from conceptual benchtop testbeds to prove the viability of a scientific concept to optimizing a fully integrated sensor prototype; to characterizing the repeatability and durability of the prototype system over prolonged periods of operation; to deploy our sensors/systems in operational environments for testing and validation. The EEE will interface with the scientists, system engineers (SEs), mechanical engineers (MEs) and program managers (PMs), and occasionally with subject matter expert contractors, to understand the envisioned system requirements and develop the control electronics requirements, electronic designs/circuit schematics, board layout and outsource the board fabrication and build up. Upon receiving these boards, the EEE will independently test and validate the board functionalities, troubleshoot issues, optimize circuit/layout designs, and support SEs and MEs in system-level integration, testing and optimization. This will require the EEE to be fully independent and accountable across embedded circuit design, layout, testing and firmware development to get to a working brassboard or prototype. Equally important, the candidate will provide compelling technical inputs to support program reviews, proposals, and business development activities for US Department of Defense (DoD) and Intelligence Community (IC) customers, as well as commercial clients, to expand our portfolio into innovative technologies and application base. The candidate will have the room to display their initiatives and passion with the potential to lead current and incoming projects/tasks. The right candidate will also have the opportunity to lead the system engineering team with the growth of the company and as we transition into the commercial markets. The candidate will report directly to the Founder/CEO of the company. Minimum Qualifications – BS/MS/PhD degree in Electrical Engineering. – 15-20 years in hardware design, testing and optimization. – Extremely proficient in Electronic Circuit Design: Analog, Digital, Embedded Control System Design utilizing Microcontrollers / DSP (8, 16, 32 bit), FPGA and CPLD, Motor Control, Communication Standards (RS485 / RS-422, RS-232, CAN, USB 2.0, LIN, SPI, I2C, JTAG), Power Supply Design (Linear and DC/DC Switching Regulator) – Proficient in Altium Designer, Mentor Graphics Schematic Capture, OrCAD Schematic Capture and PSpice, Microsoft Excel, Word, Power Point, Project, Visio, Mathcad. – Programming ability: C, VHDL, Intel 8051, Motorola 6800 and Microchip Assembly, Pascal, Basic. – Proficient with benchtop electronics lab instruments (such as oscilloscopes, LCR meters, and logic analyzers) to conduct early testing and validation. Desirables Experience – Design, development, testing and certification (such as IEC 60601-1) of biomedical devices. – Familiarity with FDA regulatory strategies. – Design for manufacturing. – Environmental testing to meet ruggedization standards (such as MIL-STD-810H). – Knowledge of analytical instrumentation design such as air samplers, gas chromatograph, mass spectrometers, electron multipliers, switching high-voltage waveforms, vacuum component and integration, high-speed DC motor drivers, and RF electronics. – Critical and independent thinker with a keen sense of accountability about their design and performance. – Ability to work in an agile team environment. – Strong project management skills within budget and schedule. – Capability to work under pressure and with a sense of urgency. – Excellent verbal and written communication skills – Ability and passion to lead a system engineering team. Employment Status Full Time Other Requirements U.S. Permanent Resident or U.S. Citizen EOE/AA Detect-Ion is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. Background Check Candidates who receive a conditional offer of employment will be subject to a background check. Company DescriptionDetect-ION is a deep-tech startup founded in 2021 and develops next generation sensors for enhanced CBRNE (Chemical, Biological, Radiological, Nuclear, Explosives) awareness for a broad range of applications including, but not limited to, environmental monitoring, biomedical/health sciences, warfighter protection, situational awareness, and national defense/security. The Detect-ION team has a collective 75+ years of contract research and development experience, and through several recent prestigious DTRA, IARPA, DARPA awards, has developed several disruptive sensor technologies for a broad range of high-value chemical/biological sensing applications. Detect-ION develops sensors and systems in a dedicated 4000 sqft laboratory space located in Tampa, FL. We thrive in solving hard, high-value detection problems that require a multidisciplinary effort at the intersection of organic chemistry, biochemistry, gas chromatography, mass spectrometry, vacuum technology, data analytics, system engineering and AI/ML algorithms to produce the most pioneering sensing capability driven by mission-specific requirements from the US government and the industry. As a recent startup, Detect-ION is built on an agile and enthusiastic sponsored research and development model to continue to serve our US government stakeholders and clients, while we explore commercial markets for our maturing technologies. We thrive on efficient project execution through astute scientific problem-solving experience and diligent program management and risk mitigation ensuring the highest ROI to our clients.Detect-ION is a deep-tech startup founded in 2021 and develops next generation sensors for enhanced CBRNE (Chemical, Biological, Radiological, Nuclear, Explosives) awareness for a broad range of applications including, but not limited to, environmental monitoring, biomedical/health sciences, warfighter protection, situational awareness, and national defense/security. The Detect-ION team has a collective 75+ years of contract research and development experience, and through several recent prestigious DTRA, IARPA, DARPA awards, has developed several disruptive sensor technologies for a broad range of high-value chemical/biological sensing applications. \r\nDetect-ION develops sensors and systems in a dedicated 4000 sqft laboratory space located in Tampa, FL. We thrive in solving hard, high-value detection problems that require a multidisciplinary effort at the intersection of organic chemistry, biochemistry, gas chromatography, mass spectrometry, vacuum technology, data analytics, system engineering and AI/ML algorithms to produce the most pioneering sensing capability driven by mission-specific requirements from the US government and the industry.\r\nAs a recent startup, Detect-ION is built on an agile and enthusiastic sponsored research and development model to continue to serve our US government stakeholders and clients, while we explore commercial markets for our maturing technologies. We thrive on efficient project execution through astute scientific problem-solving experience and diligent program management and risk mitigation ensuring the highest ROI to our clients.

Job DescriptionDescription: Smiths Interconnect, Inc. is a leading provider of technically differentiated electronic components, subsystems, microwave and radio frequency products that ensure high speed, secure connectivity of critical applications in the defense, aerospace, communications and industrial markets. Our microwave technology is used in radar, communication and surveillance systems that are mission-critical and operate in extreme environments in aerospace and defense. Our microwave components and connectors ensure optimal performance, durability and safety of space satellites. Our semi-conductor test products are used to test highly sophisticated semi-conductors and electronic circuits in communication systems, gaming products and computing devices. Our in-flight antenna systems provide passengers with internet connectivity gate-to-gate on planes around the world. Our connector and cable solutions ensure reliability of critical medical equipment, and safe operation of trains and transport systems. Our products and services are often critical to our customers’ operations, while our proprietary technology and high service levels help create competitive advantage. As such, we welcome colleagues with a curious mind, who are happy with responsibility, and enjoy a challenge. Smiths Interconnect, Inc. is currently seeking new talent for a PCB Designer position. This position will primarily work with Designers, Manufacturing Engineers, Electrical Engineers, and Mechanical Engineers to create printed circuit board (PCB) layouts along with PCB fabrication and assembly documentation. We are looking for the right individual who thrives in creating, enjoys problem-solving, and pays attention to detail, while operating in a rewarding, friendly, forward-thinking environment. Your previous education or experience must demonstrate your desire to create and problem solve whether this was in high school, trade school, college, university, industry, or the military. We will provide training that will build on your core aptitudes and problem-solving capabilities. We are looking for a team player who is friendly, energetic, cognitive, and eager to learn. U.S. Citizenship Required. U.S. Citizenship is required to obtain government security clearance. Key traits for this position should include: • Sound reasoning and strong problem-solving abilities, • Understanding basic electrical theory and material properties (Examples include conductivity, impedance, inductance, PCB materials/finishes, etc.), • Attention to detail which is crucial in this role, • Being a fast learner, flexible, and adaptable, • Having great personal and communication skills for internal and external interactions, • The ability to speak and write clearly when describing technical issues, • Use Schematic creation and PCB layout design software (DxDesigner, PADS), • Create PCB drawings and Gerber files for PCB fabrication (PADS, AutoCAD), • Use and modify CAD models and drawings (PADS, AutoCAD), • Create and check component footprints according to IPC and company standards, • Interface with other Engineers about component footprints and circuit layouts, • The design and layout of printed circuit boards for Radio Frequency (RF), mixed signal, and hi-speed circuits based on industry and company standards and procedures, • Generation, modification and release of accurately detailed documents, drawings, 3D models and files for schematics, PCB fabrication, bill of materials, and assembly drawings using CAD tools along with Product Lifecycle Management (PLM) systems, • Support Engineers during prototyping, design verification, and updates to designs, • Collaboration with Electrical, Mechanical, and Manufacturing Engineers, and Designers, • Support of technical proposal generation, peer/customer design reviews, and supplier enquiries, • Other duties as requiredRequirements: Experience: • Must have creative & problem-solving skills demonstrated through projects, experience, or training., • Shall have a minimum of 2 years of experience with PCB design, CAD, electronics assembly or test, or applicable experience in military or aerospace industry. Security: U.S. Citizenship Required. U.S. Citizenship is required to obtain government security clearance.

Job DescriptionDescription Job Title: Senior Electrical Engineer (P.E.) Location: Tampa, Florida (Onsite Required) Employment Type: Full-Time, W2 Compensation: $120,000 to $145,000 annual salary (Hard cap: $150,000) Schedule: Monday through Friday, 7:30 AM to 4:30 PM Travel Expectations: Occasional in-state travel for site visits. No regular overnight or out-of-state travel expected. About the Opportunity: Join a 52-year-old, privately owned, multi-disciplinary architecture and engineering firm based in South Tampa with a strong book of government and institutional work across the state of Florida. Long & Associates Architects/Engineers, Inc. offers a hands-on, in-house environment where collaboration across architecture, structural, mechanical, and electrical teams is the norm. This role is the result of planned succession: our long-tenured Senior Electrical PE is preparing for retirement, and we seek a capable, Florida-licensed P.E. to step into both current leadership and future ownership opportunity. Position Overview: The Senior Electrical Engineer (P.E.) will lead the design and documentation of electrical systems across a variety of building types, including K-12 schools, higher education campuses, municipal buildings, libraries, and industrial facilities. You will coordinate closely with architectural and mechanical disciplines and serve as both designer and project leader, with full responsibility for signing and sealing your work. This is a succession-focused hire, and we are prioritizing individuals who demonstrate leadership, accountability, and long-term commitment. Key Responsibilities Design & Engineering Leadership • Lead the electrical design for new construction and renovation projects, • Design power distribution, lighting, low-voltage, and signaling systems, • Conduct field investigations and project punchouts, • Sign and seal electrical documents in accordance with Florida law Cross-Disciplinary Coordination • Collaborate with architectural and mechanical teams to ensure design integration, • Review and incorporate LEED standards and sustainable practices in design Project Oversight & Client Interaction • Serve as lead electrical engineer on assigned projects, • Interface directly with clients and attend design meetings, • Prepare estimates, fee proposals, and participate in scheduling decisions Technical Tools & Documentation • Prepare documentation using AutoCAD and Revit (BIM), • Use EasyPower and other software for load calculations and system coordination, • Perform lighting calculations to comply with ASHRAE and Florida Energy Code Skills, Knowledge and Expertise Required Qualifications: • Bachelor’s degree in Electrical Engineering (ABET-accredited); Master’s preferred, • Active Florida Professional Engineer (P.E.) license, • Minimum 5 years of post-licensure experience in building systems design, • Demonstrated experience signing and sealing electrical documents, • Proficiency with Revit (BIM) and AutoCAD, • Knowledge of EasyPower or equivalent power design software, • Experience with Division 27/28 systems including data, fire alarm, CCTV, and security, • Ability to pass FDLE Level II background check and obtain school/port access credentials, • U.S. work authorization and E-Verify compliant Preferred Qualifications: • RCDD certification, • LEED AP or LEED BD+C accreditation, • Experience with daylight harvesting and alternative energy design, • Prior involvement with LEED-certified or energy-conscious projects Benefits • Health Insurance (75% employer-paid), • Dental and Vision Insurance (available through pre-tax payroll deduction), • $20,000 Company-Paid Life Insurance, • Company-Provided Long-Term Disability Insurance (required participation), • 401(k) Plan with employee-managed contributions, • Profit Sharing (based on firm performance), • Paid Time Off: Two weeks vacation (accrued), 3 personal days, 6 paid holidays, • Paid licensure exam time (up to 8 hours) and fee reimbursement upon passing (after 1 year), • Education expense reimbursement (case-by-case approval) Background & Clearance Requirements: • Must pass FDLE Level II background screening, • Must meet E-Verify eligibility, • Must be able to obtain security badges for school and port job sites Ideal Candidate Profile: • Mid-to-senior career electrical engineer with leadership intent, • Looking to own their discipline and grow into a principal-level role, • Experienced in designing for public sector/governmental clients, • Comfortable working onsite and participating in a close-knit office culture, • Proactive communicator with clients and team members

Job Description Electrical Engineer/Designer Location is onsite in Tampa, FL. This is not a remote or hybrid position. PD Power Systems LLC is seeking an Electrical Engineer/Designer responsible for designing electrical and control systems for electrical power generation and distribution systems and equipment. The candidate will work closely with Mechanical Designers and Engineers in integrating controls into the electrical systems. The candidate must be familiar with electrical power generation, distribution, and various control systems to include PLCs, generator digital controls, and human machine interfaces. Experience with 2D CAD is required, experience with 3D CAD is desirable. The position requires close teamwork with other employees in engineering as well as support, both within the company and with subcontractors. Roles and Responsibilities • Prepare, edit and maintain electrical schematics, panel diagrams, cable assembles, and wiring drawings using AutoCAD software., • Create, maintain and troubleshoot PLC systems., • Be able to source components based upon customer requirements and specifications., • Education: 4-year Electrical Engineering degree with 1-5+ years of hands-on experience. OR, • Experience designing electrical control systems and power generation and distribution systems., • To include prototype builds, production builds, schematic designs, and troubleshooting and diagnosing system issues., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Experience with electrical power from low voltage AC (120/208V) through medium voltage (15kV)., • Understanding electrical design techniques, circuit protections, and principals involved in development of electrical drawings for Technical Data Packages (TDP)., • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Hazen and Sawyer is seeking a CAD/BIM Designer-Revit MEP in our Tampa, Hollywood, Fort Myers or Orlando, Florida office. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Creation of Revit models, Revit families, and CAD base files for use in creating contract documents., • Ability to design piping layouts in Revit to produce enlarged plans, sections, and details for various process mechanical systems., • Coordinate with other disciplines (Site Civil, Structural, Architectural, HVAC, Electrical, and I&C) to help resolve design conflicts and challenges., • Executing redlines from Engineers and senior CAD/BIM Designers., • Ensure drawing compliance with company and client CAD standards., • Completion of a technical school with CAD design certificate or Associate’s degree with emphasis on Revit MEP preferred., • Minimum 2 years’ experience using Revit MEP and AutoCAD required., • Experience leading and coordinating drawing production for small to medium sized projects., • Some design experience with water and/or wastewater projects desired., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Engineer Your Future With Us VoltAir is an award-winning consulting engineering firm with a passion (some call it an obsession) for quality engineering. Our friendly and relaxed culture allows you to dig into incredible projects alongside talented colleagues while making career-building impacts in your local and national communities. We attract and reward skilled individuals who share a passion for engineering design. Our modern, spacious headquarters are in sunny Tampa Bay, with several offices around the country. Position Overview The Architectural Lighting Designer is a full-time, on-site role in the Tampa, FL office. This role is responsible for developing and implementing innovative, yet constructable lighting and control designs that incorporate architectural, interior design and landscape architectural considerations. Day-to-day tasks include but are not limited to: Creating lighting and control strategies; Luminaire research; Collaboration with architects, interior designers, landscape architects and owners; and Project management, ensuring the aesthetic, functional and budget requirements of lighting and control systems are met for new and renovated projects. The role will also involve reviewing standards, codes, and specifications to ensure compliance and excellence in project delivery. Minimum Qualifications • Bachelor’s degree in Lighting Design, Interior Design, Architecture, Engineering, or a related design industry field, • 3 years of experience with applied knowledge in Lighting Design, creating innovative and functional lighting and control solutions for a variety of interior and exterior space types., • Basic knowledge of varying luminaire/lamp types and their application in the design of interior and exterior spaces., • Knowledge of Lighting Control systems and their integration into the lighting design., • Familiarity with Architectural, Interior Design and Landscape Architectural principles to complement project aesthetics and functionality., • Strong communication and collaboration skills to work effectively with clients, architects, interior designers, landscape architects and other design and construction trades on project teams., • General understanding of industry standards, building codes, and sustainability principles., • Proficiency in relevant design software and tools such as AutoCAD, Revit, AGi32, Bluebeam, InDesign., • Familiarity with the lighting industry vendors, their equipment, and their reps/agents., • Accreditation (LC, CLD) or a proven track record/service within IALD/IES is strongly desired Must have the ability to perform the necessary job-related functions with or without reasonable accommodation. • Travel up to 20% for site investigations and assessments, or client meetings, • Remain in a stationary standing or sitting position, for prolonged periods at a computer., • Work extended hours, evenings and weekends when necessary to meet business deadlines and attend lighting industry tradeshows and conferences., • Regular use of office equipment such as a computer/laptop and computer screens, • Dexterity of hands and fingers to operate a computer keyboard, mouse and other computer components, • Ability to see differences between colors, shades and brightness, • Depth perception (three-dimensional vision, ability to judge distances and spatial relationships), • Competitive compensation and benefits package, • Unlimited PTO, • Generous paid holiday schedule, • Parental leave, • 401k plan with company match, • Paid company events and extracurricular activities, • Employee perks and discounts, • Educational assistance & professional development VoltAir, Inc, founded in 2006, is an engineering firm that provides Mechanical, Electrical, Plumbing, Fire Protection, and Information Technology design and commissioning services. Our projects span aviation, office, restaurant, retail, higher education, parking, K-12, multi-family, healthcare, labs, recreational facilities and central energy plants. We are a certified minority-owned corporation and employ nearly 50 professionals. We are headquartered in Tampa, Florida, with additional locations in Orlando, Florida; Houston, Dallas/Ft. Worth, Texas, and Atlanta, Georgia. Equal Employment Opportunity VoltAir does not discriminate in recruitment, hiring, training, promotion, or other employment policies on the basis of any protected characteristics. All qualified applicants will receive consideration for employment without regard to age, race or color, religion, sex or sexual orientation, gender identity or expression, national origin, physical or mental disability status, pregnancy status, genetics, protected veteran status, or any other characteristic as protected by applicable federal, state, or local law. In addition, we make reasonable accommodation to the needs of disabled applicants and employees, so long as this does not create an undue hardship on the business or threaten the health or safety of others at work.