Trabajos electrical designer en Milwaukee, WisconsinCrear alertas

Job Description Digital Design Engineer Job Description This role focuses on designing, implementing, and validating FPGA-based digital systems and advanced power control firmware. You will write, simulate, and debug HDL code, develop command-line tools for testing FPGA designs, and use Matlab and Simulink to model electrical power systems. You will collaborate closely with electrical power and controls engineers to optimize system performance by integrating both digital hardware and software expertise. Responsibilities • Write, simulate, and debug HDL code for FPGA designs, ensuring robust and reliable digital implementations., • Develop and maintain command-line tooling, primarily in Python, to test and validate FPGA designs efficiently., • Use Matlab and Simulink to model and analyze electrical power systems and support the development of advanced control algorithms., • Apply combined digital hardware and software knowledge to optimize overall system design and performance., • Collaborate with electrical power engineers and controls engineers to develop advanced power control firmware for power systems and power electronics applications., • Implement and support embedded systems HDL designs involving communication protocols such as SPI, I2C, memory buses, ARM AMBA AHB or AXI, CAN, RS485, Ethernet, EtherCAT, USB, and Fiber Optics., • Develop HDL designs for digital signal processing, switching power converter control, and motor control applications., • Use lab equipment such as oscilloscopes, logic analyzers, and network analyzers to probe, test, and debug digital hardware., • Use Python to create scripted workflows and tooling integrated with version control systems to support repeatable testing and development., • Work with FPGA toolchains and related software to synthesize, implement, and verify designs on target hardware., • Document designs, test procedures, and results clearly to support ongoing development and future maintenance. Essential Skills • Bachelor of Science degree., • 5+ years of industry experience with embedded systems HDL design., • Experience with one or more communication protocols such as SPI, I2C, memory bus, ARM AMBA AHB or AXI, CAN, RS485, Ethernet, EtherCAT, USB, or Fiber Optics., • Experience with digital signal processing (DSP) in embedded or FPGA-based systems., • Experience with switching power converter control in power electronics applications., • Experience with motor control implementations using HDL or embedded systems., • Proficiency using Verilog or VHDL for FPGA and digital logic design., • Ability to use lab equipment such as oscilloscopes, logic analyzers, and network analyzers to probe and debug digital hardware., • Experience using Python to create command-line tooling and scripted workflows., • Experience using Git or similar version control systems for source code and HDL management., • Hands-on experience with FPGA design and implementation., • Knowledge of power systems and power electronics concepts relevant to digital control., • Familiarity with HDL-based development flows including simulation, synthesis, and hardware debugging. Additional Skills & Qualifications • Experience using Matlab and Simulink, including HDL Coder, to model and generate code for electrical power systems., • Experience working with AMD/Xilinx Vivado tool suite and related FPGA platforms., • Experience with fixed-point mathematics and its application in digital control and DSP implementations., • Experience with both Verilog and VHDL for greater flexibility in digital design., • Experience designing ARM AMBA AXI and AXI-Stream connected modules., • Understanding of clock domain management and clock domain crossing techniques in digital systems., • Experience with CMake for build configuration and automation., • Experience with digital hardware design using Altium Designer or similar electronic design automation tools., • Experience with C or C++ for embedded systems development., • Experience with embedded Linux and microcontroller (MCU) development., • Experience with power systems and power electronics design and control., • Strong problem-solving skills and the ability to debug complex digital and embedded systems., • Ability to work collaboratively with multidisciplinary engineering teams. Work Environment This position is based in a research and development center located in Milwaukee, WI. The role is on-site, providing direct access to lab facilities, FPGA development platforms, and test equipment such as oscilloscopes, logic analyzers, and network analyzers. The environment supports hands-on work with digital hardware, FPGA boards, and power electronics systems, as well as software tools including Matlab, Simulink, HDL Coder, AMD/Xilinx Vivado, Altium Designer, Git, Python, and CMake. Job Type & Location This is a Permanent position based out of Milwaukee, WI. Pay and Benefits The pay range for this position is $100000.00 - $150000.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Full benefits- health, dental, vision, 401K Workplace Type This is a fully onsite position in Milwaukee,WI. Application Deadline This position is anticipated to close on Sep 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: Power Distribution and Make Ready Designer Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work Location: Milwaukee, WI area / Remote (U.S.) Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth. ABOUT THIS OPPORTUNITY We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems. In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered. Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters. WHAT YOU WILL DO • Execute overhead distribution or make-ready design work orders while meeting quality, time, and budget expectations, • Apply established engineering design standards, NESC requirements, and internal processes, • Perform end-to-end make-ready, joint-use, and/or general distribution design, • Conduct permitting and easement research (pole ownership, ROW, property rights, approvals), • Collaborate with team members to resolve design challenges and ensure accurate deliverables, • Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems, • Perform quality control reviews when required, • Support additional duties as assigned TOP COMPETENCIES & SKILLS Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready Requirements: WHAT WE’RE LOOKING FOR • High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred, • Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred), • Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages, • Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred, • Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently, • Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings, • Authorization to work in the United States is required, • Willingness to travel occasionally, including minimal overnight travel when project needs require, • Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate PHYSICAL REQUIREMENTS • Ability to work for extended periods using a computer keyboard, monitor, and telephone, • Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment, • Ability to communicate effectively through oral and written channels ABOUT SIGMA TECHNOLOGIES Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™. *To learn more about working at Sigma, view our video and career page. • If you do not have Power Design experience, please refer to our other open positions: https://bit.ly/TeamSigmaJobs *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles. WHAT WE OFFER We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus: • No-cost monthly healthcare plan option for employees, • Competitive pay, • Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma, • 401(k) plan with matching contributions up to 5% of salary, • Paid holidays, vacation, and sick time, • Education and professional licensing assistance programs This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs. Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law. PM22

Job Description Electrical Power Distribution Design & Estimating Engineer | West Allis, Wisconsin | $85,000–$100,000/year + estimated $8,500–$10,000 commission If you can take an electrical project from power distribution design to a solid construction estimate, this is an opportunity to put both sides of your expertise to work. You’ll contribute to projects from design through construction, developing power distribution systems, preparing accurate estimates, and working alongside architects, engineers, contractors, and construction teams. Your work will directly influence both the technical quality and financial success of each project. What you’ll do: • Design electrical power distribution systems, including service entrances, feeders, panels, and lighting, • Develop one-line diagrams, load calculations, and electrical layouts using AutoCAD and Revit, • Perform lighting design, voltage drop calculations, and coordination studies, • Prepare cost estimates using Accubid or comparable estimating software, • Review construction documents and develop material take-offs and labor estimates, • Collaborate with project teams to align designs with project requirements and budgets, • Respond to RFIs and provide technical support during construction, • Ensure designs comply with NEC and applicable construction standards, • Manage multiple design and estimating assignments while maintaining accuracy and deadlines What you bring: • 3–7 years of experience in electrical design and estimating, • Experience in design-build, electrical contracting, or general contractor environments, • Proficiency with AutoCAD, Revit, Bluebeam, and Accubid or comparable estimating software, • Strong working knowledge of the National Electrical Code and construction standards, • Ability to manage multiple electrical designs and estimates simultaneously, • Strong analytical, organizational, communication, and problem-solving skills, • Bachelor’s degree in Electrical Engineering, or a PE license or Designer of Engineering Systems license may be considered in lieu of the degree LEED certification and BIM experience are a plus. If you’re an electrical engineer or designer who understands both power distribution design and construction estimating, this role gives you the opportunity to have an impact well beyond the drawing board.

Job DescriptionDescription: Since 1913, Hooper has grown to become a well-respected electric power and mechanical contractor. With headquarters in Wisconsin and regional offices in the states of Colorado, Florida, and Ohio, Hooper provides a wide range of services to support commercial and residential clients. Hooper provides competitive compensation and many supportive benefits including Health, Dental, and Vision Insurance, Matching 401(k) plan, Paid Time Off (PTO), 9 paid holidays, Identity Theft Protection, Life Insurance, as well as Short-Term and Long-Term Disability coverage. The Mechanical VDC Designer is responsible for designing plumbing projects and managing all aspects of 3D Building Information Modeling (BIM). This includes creating, obtaining, evaluating, coordinating, and distributing BIM models for use in estimating, purchasing, and operations, using BIM modeling software and related tools. Principal Accountabilities: • Coordinate design drawings and piping layouts with various trades on a per project basis to ensure proper fit (HVAC, plumbing, electrical etc.)., • Provide design oversight to all design-build projects and assistance to project managers on design-assist projects as well as coordination efforts for typical construction sites., • Ability to read, understand and interpret the Wisconsin Plumbing Code., • Represent Hooper Corporation in matters of project coordination and technical assistance as required., • Communicate with appropriate parties to resolve design issues, change orders, and approvals. Maintains organized records of active projects., • Assist with technical interpretation and writing of RFI's as need arises., • Create and maintain standard processes & procedures., • Troubleshoot problems as they arise., • Maintain high level of competency of software through continued use, training, conferences, seminars, and workshops., • Help with project estimating as it relates to potential design details and design hours required., • Provide project kick-off information and attend meetings., • Perform field surveys when necessary to determine actual field conditions to ensure the designed system will fit the given building structure., • Assist with the Revit to fabrication process to maintain viable database., • Perform additional assignments per project manager's direction., • Build and maintain strategic relationships in the BIM and software industries., • Performs other duties/special projects as assigned.Requirements:, • 2-year associate degree in 3D design or relevant plumbing experience., • Minimum of two years’ experience with AutoCAD, Autodesk Fabrication, NAVIS works, REVIT, or other applicable software. Additional training provided., • Proficiency utilizing Microsoft Word, Excel, and Outlook., • Must have excellent organizational and communication skills., • Must be able to handle multi-tasking and set priorities., • Must have the ability to work as part of a team., • Good analytical and problem solving, verbal and written communication skills and interpersonal skills to work effectively within a team environment., • Valid Driver’s License., • Comfortable working in a team environment with 30 - 40 personnel, designing approximately 20 - 30 jobs per year. Description of Physical Working Environment: • Works in normal office environment from a sitting position with a computer. Repetitive typing and computer use required. Regular bending, twisting, and light lifting with or without reasonable accommodation., • Makes job site visits as necessary requiring driving personal vehicle., • Works on field construction sites in all kinds of weather to survey site conditions and resolve coordination issues with the trades., • The ability to climb up and down ladders and steps on site is required with or without reasonable accommodation. Hooper is an equal opportunity/affirmative action employer, considering candidates regardless of age, color, creed, disability, gender identity, national origin, protected veteran status, race, religion, sex, sexual orientation, or any other status protected by applicable local, state, or federal law.

Job DescriptionDescription: The Design Engineer-II provides the workforce that produces most of the firm’s work. No longer ranked as in training, these individuals are assigned specific tasks on project teams and are expected to use their education, intelligence, and experience to resolve the engineering problems and tasks they are assigned with minimal oversight. More experienced staff, however, are always available to help when the Design Engineer needs assistance. Typical Duties The following duties are typical of the position, but are not all-encompassing. Each person is expected to help in whatever duties are required to deliver a quality product on schedule. • Makes calculations, using engineering formulas and skills for design such as heating and cooling loads, lighting calculations, power distribution calculations, and equipment sizing., • Prepare schematic layouts and/or supervise/direct/assist lower-level team members to prepare layouts., • Layout portions of ductwork and piping systems or branch circuitry based on schematic layout or per instructions provided by Project Engineer/Manager., • Specialized drawings, such as plumbing isometrics and risers or electrical riser diagrams., • Select equipment based on basis of design recommendations or the Project Engineer and fill out equipment schedules., • Provide drawings for own designs and produce sketches to incorporate in drawings by CAD designers., • Research design options and document findings for Project Engineer/Manager., • Provide information to the Project Engineer/Manager for incorporation into specifications., • Review shop drawings independently if needed., • Research code issues and ask general questions of code officials., • Organize and maintain project files. Maintain a neat and organized work area that allows efficient access to information required by other team members., • Assure that drawings and designs are in accordance with the company's production and design standards., • Keep the Project Manager informed of workload and any changes in project scope or additional services Limits of Authority Has authority to perform moderately complex design duties, which are checked for accuracy by themselves and others. May not exceed budgeted hours on task without approval of the Project Manager. May not change the scope of work or deviate from any other part of the contractual document without the Program Manager’s approval. Relationship to Others Reports to the Project Manager. Within team, has contact with CAD designers, designers, and more experienced design staff. Has contact with equipment suppliers. Limited contact with clients and contractors. Works directly for various Project Designers/Engineers, according to assignment. Requirements: Knowledge and Experience Required 1. Minimum 2 years’ previous design experience at the Design Engineer 1 level or equivalent., 2. Bachelor of Engineering Degree in Mechanical or Electrical Engineering from an accredited university or equivalent., 3. Experience with Autodesk Revit and load calculation software such as IES VE, Trane TRACE 3D, or Carrier HAP. Experience with IES VE is a plus., 4. Understanding of applicable design codes., 5. Continues learning process by attending in-house seminars and continuing education opportunities outside of the office., 6. Passing the Engineering-in-Training exam or obtaining a discipline-focused designer license is encouraged.

Job DescriptionDescription: The Design Engineer 1 is assigned specific tasks on project teams and are expected to use their education, intelligence, and experience to resolve the engineering problems and tasks that are assigned. They are expected to utilize experience gained in the application of engineering fundamentals and continue to learn and apply theoretical knowledge to practical application, but with greater independence than at the designer level. More experienced staff are always available to help when the Design Engineer-1 needs assistance. Typical Duties The following duties are typical of the position, but are not all-encompassing. Each person is expected to assist in whatever duties are required to deliver a quality product on schedule. 1. Makes calculations, using engineering formulas and skills for design such as heating and cooling loads, lighting calculations, power distribution calculations and equipment sizing., 2. Layout portions of ductwork and piping systems or branch circuitry based on schematic layout by Project Designer/Engineer., 3. Specialized drawings, such as plumbing isometrics and risers or electrical riser diagrams., 4. Select equipment based on recommendations of more experienced staff and fill out equipment schedules., 5. Generally expected to produce design drawings themselves., 6. Research design options and document findings for Project Designer/Engineer., 7. Provide information to the Project Designer/Engineer for incorporation into specifications., 8. Review shop drawings with help from more experienced staff., 9. Research code issues and ask general questions of code officials., 10. Organize and maintain project files. Maintain a neat and organized work area that allows efficient access to information required by other team members., 11. Assure that drawings and designs are in accordance with company production and design standards., 12. Keep the Project Manager informed of workload and any changes in project scope or additional services., 13. Complete a minimum of 10 training hours annually towards professional growth and development. Limits of Authority Has authority to perform simple to moderately complex design duties, which are checked for accuracy by themselves & others. May not exceed budgeted hours on task without approval of the Project Manager. May not change the scope of work or deviate from any other part of the contractual document without the Project Manager’s approval. Relationship to Others Reports to the Project Manager. Within the team, has contact with CAD designers, designers, and more experienced design staff. Has contact with equipment suppliers. Limited contact with clients and contractors. Works directly for various Project Designers/Engineers, according to assignment. Requirements: Knowledge and Experience Required 1. Minimum 2 years’ previous design experience at the Designer level or equivalent., 2. Bachelor of Engineering Degree in Mechanical or Electrical Engineering from an accredited university or equivalent., 3. Experience with Autodesk Revit and load calculation software such as IES VE, Trane TRACE 3D, or Carrier HAP. Experience with IES VE is a plus., 4. Understanding of applicable design codes., 5. Continues learning process by attending in-house seminars and continuing education opportunities outside of the office., 6. Completion of the Engineering-in-training exam is encouraged.

Job DescriptionDescription: A Designer is involved in the application of engineering fundamentals to the design of building HVAC, plumbing, fire protection, and/or electrical systems. This is a developmental position in which the designer learns to apply theoretical knowledge to practical application. Typical Duties The following duties are typical of the position but are not all-encompassing. Each person is expected to help in whatever duties are required to deliver a quality product on schedule. • Performs routine design tasks such as ductwork, pipe sizing, or electrical branch circuitry. Works on portions of projects under the direction of others., • Is encouraged to try to solve engineering problems using experience, judgment, and education, but is expected to ask for assistance when needed., • Input of data into pre-written computer programs, • Research equipment selection from catalogs under the direction of the Project/Designer/Engineer., • May prepare the drawings of designs he/she has originated or from sketches provided by others., • Maintain a neat and organized work area that allows efficient access to project information required by other team members. Limits of Authority Has authority to perform design duties, which are checked for accuracy by themselves & others. Keeps the Project/Designer/Engineer aware of workload and requests work when needed. Requirements: Knowledge and Experience Required 1. Bachelor of Engineering Degree in Mechanical or Electrical Engineering from an accredited university or equivalent., 2. Continue the learning process by attending in-house seminars and continuing education opportunities outside of the office. Completion of the Engineering-in-Training exam is encouraged., 3. Experience with Autodesk Revit and load calculation software such as IES VE, Trane TRACE 3D, or Carrier HAP. Experience with IES VE is a plus.

Job DescriptionAbout Kapur: Kapur & Associates is a well-established, employee-owned consulting engineering firm that has been providing engineering, survey, site design, transportation, municipal, construction inspection, and construction management services to clients across the United States for over 40 years. We have grown to over 400 professionals and have multiple offices in Wisconsin, Illinois, Kentucky, Indiana, Pennsylvania, and Florida. At Kapur, we’re looking for candidates who share our ALL-IN commitment to excellence. We are seeking individuals who are passionate about their work, have a strong work ethic, and are committed to delivering outstanding results. We value teamwork, and we are looking for individuals who are collaborative and enjoy working in a team environment Summary: Kapur is seeking a talented and detail-oriented Designer to join our team to provide electric and gas design services for residential, commercial, and industrial customers within the We Energies territory. In this role, you will be responsible for creating detailed service designs and small distribution plans using MicroStation software. As a Designer, you will play a crucial role in supporting the implementation of gas and electric services to customers while collaborating with contractors and internal We Energies team members. This is a union designer position – as part of the position you will enroll in the International Brotherhood of Electrical Workers (IBEW) 2150. Responsibilities: • Utilize the software tool, MicroStation, to create accurate and detailed designs for gas and electric systems for residential, commercial, and industrial customers., • Collaborate with builders to understand project requirements and effectively communicate design specifications and progress updates., • Effectively document and communicate project updates on a weekly basis to internal team members., • Develop and maintain strong working relationships with internal teams and external partners to ensure seamless project execution., • Create site plans, determine meter locations, and evaluate routes that align with regulatory standards, industry best practices, and We Energies guidelines., • Meet with We Energy customers onsite to determine equipment and utility locations., • Provide a list of quantities and develop cost estimate for the gas and/or electric installation., • Effectively manage multiple projects simultaneously, ensuring deadlines are met and high-quality deliverables are produced., • Evaluate electric and gas loads to determine proper service and meter size., • Conduct thorough research and analysis to identify potential design issues or improvements and propose appropriate solutions., • Assist in the development and improvement of design processes, tools, and workflows to enhance efficiency and productivity., • Stay up to date with industry trends, technologies, and regulations related to gas and electric design services. Qualifications: • A minimum of a high school diploma is required., • Secondary education in Civil, Mechanical or Electrical is preferred., • Driver license and reliable vehicle required., • Willing to complete site visits and travel to office in inclement weather., • Experience in gas and/or electric design services, residential, commercial, or industrial properties is a plus., • Proficient using design software, specifically MicroStation, with a strong understanding of design principles and best practices is a plus., • Excellent verbal and written communication skills to effectively interact with builders, stakeholders, and team members., • Strong organizational skills and ability to handle a high workload, managing up to 20 projects concurrently., • Detail-oriented mindset with a focus on producing accurate and error-free designs., • Patient and adaptable approach to problem-solving, with the ability to navigate challenges and changes in project requirements., • Ability to accept constructive criticism and discuss design options in a professional manner., • Self-motivated and proactive attitude, demonstrating a strong work ethic and commitment to meeting deadlines., • Ability to work both independently and collaboratively within a team environment., • Familiarity with regulatory requirements and industry standards related to gas and electric design services is a plus. Kapur is an Affirmative Action / Equal Opportunity Employer. We use E Verify to confirm the eligibility of employees to work in the United States. Powered by JazzHR 4D20mAVuqH

Rockwell Automation is a global technology leader focused on helping the world’s manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world better every day, we know we have something special. Behind our customers - amazing companies that help feed the world, provide life-saving medicine on a global scale, and focus on clean water and green mobility - our people are energized problem solvers that take pride in how the work we do changes the world for the better.We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that’s you we would love to have you join us!Job DescriptionEmulate3D digital twin software empowers people to better envision, test, and create automation systems. As a Digital Twin Technical Consultant, you will solve real-world engineering challenges using Emulate3D and related digital engineering tools. This is a mostly customer-facing sales role with a goal of driving adoption and revenue, both from software and services sales. As part of Rockwell Automation's broader Secure Digital Operations sales team, you will help accelerate the success of digital transformation initiatives.We are looking for a well-rounded engineer who has a depth of experience in industrial simulation, controls engineering, robotics, and digital design tools. Your primary responsibility is to provide technical consultation to clients: transforming ambiguous solution objectives (the "what") to specific design architectures, proofs of concept, and functional prototypes (the "how"). You will be a guiding figure for clients with your subject matter expertise, continuing to assist them as their adoption scales with value-added success. This may include mentorship, training, and small project delivery as availability permits. While your focus will be Emulate3D software, you should also be comfortable working with connected software tools for robot programming, PLC programming, and mechanical/electrical CAD.This is a fully remote role requiring the Digital Twin Technical Consultant to reside and work in the United States. You'll join a dynamic, collaborative, and efficient global team that is passionate about digital engineering. As part of Rockwell Automation, we serve clients worldwide across diverse industries and cultures.Your Responsibilities:Provide technical support during strategic pre-sales engagements, including demos and proof-of-concept modeling.Be an expert in digital engineering, representing Emulate3D in customer engagements and internal strategy discussions.Lead and contribute to client meetings, pre-sales workshops, and industry events. Manage virtual versus in-person participation as needed.Deliver consulting microservices to global clients using Emulate3D and related digital engineering tools, including: project delivery, personalized training services, and custom Emulate3D catalog development.Communicate with the product team to influence roadmap decisions through customer feedback and technical insights.Create technical documentation, including modeling standards, reference architectures, and best practices.Support integrations with complementary tools such as robot programming environments, PLC software, and CAD platforms.The Essentials - You Will Have:Bachelor's Degree in Relevant Field.Legal authorization to work in the U.S. We will not sponsor individuals for employment visas, now or in the future, for this job opening.The Preferred - You Might Also Have:Typically requires 5 or more years of related experience.Solid experience using Emulate3D or related digital twin / digital engineering tools, especially in the context of emulation, controls testing, and virtual commissioning.Solid experience with Rockwell Automation products, especially Studio 5000 Logix Designer, ControlLogix, CompactLogix, and FactoryTalk Logix Echo. Understanding of how a PLC functions, including interpreting and writing PLC logic.Basic experience with robot simulation software, including one/more of: FANUC ROBOGUIDE, ABB RobotStudio, Yaskawa Motosim, or Siemens Technomatix Process Simulate. Understanding concepts related to robot programming.Basic experience with mechanical CAD software, including one/more of: SOLIDWORKS, AutoDesk Inventor, and PTC Creo. Understanding 3D CAD concepts such as joints, assemblies, distinction between parametric geometry and mesh-based representations.Basic experience or familiarity with electrical CAD software, such as EPLAN. Ability to interpret electrical/networking schematics into electrical model.Basic experience with scripting and programming, especially in object-oriented languages such as C#. Can create lightweight scripts for task automation or customization activities.What We Offer:Health Insurance including Medical, Dental and Vision401kPaid Time offParental and Caregiver LeaveFlexible Work Schedule where you will work with your manager to enjoy a work schedule that can be flexible with your personal life.To learn more about our benefits package, please visit at www.raquickfind.com.At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles.This position is part of a job family. Experience will be the determining factor for position level and compensation.For this role, the Total Target Compensation is from $111,200.00 - 166,800.00 USD of which 80% is base salary and 20% is variable. Our benefits for the US can be found here. Actual pay will be based on factors such as skills, knowledge, education, and experience.We are an Equal Opportunity Employer including disability and veterans. If you are an individual with a disability and you need assistance or a reasonable accommodation during the application process, please contact our services team at +1 (844) 404-7247.SummaryLocation: Mayfield Heights, Ohio, United States; Atlanta, Georgia, United States; Denver, Colorado, United States; Detroit, Michigan, United States; Milwaukee, Wisconsin, United States; Chicago, Illinois, United StatesType: Full time

Job Description:If you think in transfer functions and Bode plots but still love the smell of a freshly stuffed prototype board, keep reading. Miller Electric Mfg. LLC, a leading U.S. designer and manufacturer of welding equipment, is growing its Central Engineering team. We are looking for a Senior Power Electronics & Controls Engineer whose deep power electronics instinct is backed by solid control theory; someone who can model a plant, close a loop, and then prove it on the bench. This is advanced development: you will evaluate technologies, deliver proof-of-concept prototypes, and build the design libraries and reference architectures that our divisions turn into the products that welders depend on. The technologies and architectures you develop will become the foundation for future Miller welding platforms used by customers around the world. You will work elbow-to-elbow with electrical, software, mechanical, and weld engineers, and partner with division representatives to deliver what they need to delight our customers. Whether you prefer Milwaukee's urban energy or the exceptional quality of life, affordability, and outdoor access of Wisconsin's Fox Valley, you'll find a strong engineering community, room to make an outsized impact, and the freedom to spend less time commuting and more time building great technology. If building the platform behind the product is the kind of challenge that excites you, let's talk. If you're the sort of engineer who can turn theory into hardware and hardware into results, you'll fit right in. You don't need to check every box; if your strengths are rooted in controls, power conversion, and bringing ideas to life, we'd love to hear from you!How you will make an impact: Architect and model the control systems that define how the next generation of welding engines behave. Take new power conversion concepts from control simulation to working proof-of-concept prototypes that show what is possible. Create the reference designs that help our divisions reach the market faster and with less risk. Prove out emerging power conversion technology and define what it takes to make it robust, manufacturable, and repeatable. Partner with division representatives to turn their customer needs into the right technology bets. Mentor across the engineering community and raise the bar for control and power electronics design throughout Miller. What you need to be successful in this role: Power electronics command – You bring hands-on mastery of multi-kW switch-mode conversion, including hard-switched full-bridge topologies, SiC and other wide-bandgap devices, gate drive, and magnetics. Control theory depth – You are fluent in feedback control, plant modeling, loop compensation, and analog and digital control. Whether you came up through controls, power electronics, or both, you understand how to design, analyze, and validate stable high-performance systems. Real-world implementation – You put that theory to work, implementing control laws on microcontrollers or DSPs with hands-on experience in hardware bring-up, ADC and PWM peripherals, and timing-critical firmware. A systems lens – You connect control, power stage, thermal, EMC, and manufacturability so the whole technology wins, not just the loop. Bench instinct – You trust hard measurements over assumptions and love proving a design in copper and silicon, not just in simulation. Curiosity and ownership – You are self-directed, customer-focused, eager to learn, and ready to roll up your sleeves when the project calls for it. Minimum education and experience: Bachelor's Degree in Electrical Engineering required; an advanced degree with a controls or power electronics focus is a plus. 5-10+ years of relevant control systems and power electronics experience, or 5+ years for an exceptional engineer who has been a key contributor across many successful designs. Demonstrated experience designing and stabilizing digital control loops for switch-mode power conversion. Proven multi-kW switch-mode design experience, including SiC or other wide-bandgap devices, full-bridge topologies, gate drive, and magnetics. A track record of taking concepts from modeling and simulation through working hardware and measured results. Working knowledge of PCB layout for power and mixed-signal designs, with familiarity with design-for-manufacturing and third-party standards such as UL, CSA, and CE. A self-starter with strong analytical instincts who thrives in a hands-on R&D environment. Why ITW Welding? At ITW Welding, we’re not just a place to work – we’re a community that empowers you to grow and make a real impact. Join us and build a career that makes a difference! Here are some benefits we offer to help you build the future you want: Generous Retirement Benefits – 401(k) match PLUS an additional retirement contribution to help you plan for the future. Paid Time Off – 11 paid holidays, 5 sick days, and vacation time to take time for what matters. Company-Paid Insurance – Life, AD&D, Short-Term &Long-Term Disability insurance to give you peace of mind. Family-Friendly Benefits – 4 weeks of paid parental leave and adoption reimbursement to support your family journey. Education Assistance – tuition reimbursement; because we believe in investing in your personal and professional development. Relocation Assistance – Relocation support is available for qualified candidates joining our team in Milwaukee or Appleton, WI. Company Description: Comprised of a market-leading portfolio of best-in-class brands, the businesses of ITW Welding work together to provide premium performance delivered through a breadth of solutions encompassing welding, cutting, consumables, and accessories. ITW Welding North America represents Miller Electric Welding Equipment, Safety & Accessories, Hobart Filler Metals, and Bernard / Tregaskiss MIG Guns. Miller Electric Mfg. LLC, is headquartered in Appleton, Wisconsin, and wholly owned by Illinois Tool Works (NYSE: ITW). The company maintains its industry leadership by setting the standard for reliability, quality and responsiveness. Our tagline, “The Power of Blue,” is inspired by the blue color of Miller equipment. The company began with an innovation that responded to customer needs, growing from a one-man operation in 1929, to the world’s largest manufacturer of arc welding products. Miller keeps the tradition alive by focusing on its top priority: people. Additional Information: ITW Welding is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status, age, or any other characteristic protected by law. ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. Job SummaryJob number: JR9095Profession: Engineering

Job DescriptionAbout Kapur: Kapur & Associates is a well-established, employee-owned consulting engineering firm that has been providing engineering, survey, site design, transportation, municipal, construction inspection, and construction management services to clients across the United States for over 40 years. We have grown to over 400 professionals and have multiple offices in Wisconsin, Illinois, Kentucky, Indiana, Pennsylvania, and Florida. At Kapur, we’re looking for candidates who share our ALL-IN commitment to excellence. We are seeking individuals who are passionate about their work, have a strong work ethic, and are committed to delivering outstanding results. We value teamwork, and we are looking for individuals who are collaborative and enjoy working in a team environment Summary: Kapur is seeking a talented and detail-oriented Designer to join our team to provide electric and gas design services for residential, commercial, and industrial customers within the We Energies territory. In this role, you will be responsible for creating detailed service designs and small distribution plans using MicroStation software. As a Designer, you will play a crucial role in supporting the implementation of gas and electric services to customers while collaborating with contractors and internal We Energies team members. This is a union designer position – as part of the position you will enroll in the International Brotherhood of Electrical Workers (IBEW) 2150. Responsibilities: • Utilize the software tool, MicroStation, to create accurate and detailed designs for gas and electric systems for residential, commercial, and industrial customers., • Collaborate with builders to understand project requirements and effectively communicate design specifications and progress updates., • Effectively document and communicate project updates on a weekly basis to internal team members., • Develop and maintain strong working relationships with internal teams and external partners to ensure seamless project execution., • Create site plans, determine meter locations, and evaluate routes that align with regulatory standards, industry best practices, and We Energies guidelines., • Meet with We Energy customers onsite to determine equipment and utility locations., • Provide a list of quantities and develop cost estimate for the gas and/or electric installation., • Effectively manage multiple projects simultaneously, ensuring deadlines are met and high-quality deliverables are produced., • Evaluate electric and gas loads to determine proper service and meter size., • Conduct thorough research and analysis to identify potential design issues or improvements and propose appropriate solutions., • Assist in the development and improvement of design processes, tools, and workflows to enhance efficiency and productivity., • Stay up to date with industry trends, technologies, and regulations related to gas and electric design services. Qualifications: • A minimum of a high school diploma is required., • Secondary education in Civil, Mechanical or Electrical is preferred., • Driver license and reliable vehicle required., • Willing to complete site visits and travel to office in inclement weather., • Experience in gas and/or electric design services, residential, commercial, or industrial properties is a plus., • Proficient using design software, specifically MicroStation, with a strong understanding of design principles and best practices is a plus., • Excellent verbal and written communication skills to effectively interact with builders, stakeholders, and team members., • Strong organizational skills and ability to handle a high workload, managing up to 20 projects concurrently., • Detail-oriented mindset with a focus on producing accurate and error-free designs., • Patient and adaptable approach to problem-solving, with the ability to navigate challenges and changes in project requirements., • Ability to accept constructive criticism and discuss design options in a professional manner., • Self-motivated and proactive attitude, demonstrating a strong work ethic and commitment to meeting deadlines., • Ability to work both independently and collaboratively within a team environment., • Familiarity with regulatory requirements and industry standards related to gas and electric design services is a plus. Kapur is an Affirmative Action / Equal Opportunity Employer. We use E Verify to confirm the eligibility of employees to work in the United States. Powered by JazzHR FMKNd18USF

Job Description Electrical Engineer / Designer – Power Systems & Estimating Location: West Allis, WI Company: Roman Electric Co., Inc. Job Type: Full-Time About Us: Roman Electric Co., Inc. is a trusted name in the electrical industry, delivering high-quality design-build solutions across residential, commercial, industrial, and institutional sectors. We’re seeking a skilled and detail-oriented Electrical Engineer/Designer to join our team and take ownership of both design and estimating functions. Job Summary: As an Electrical Engineer/Designer, you will play a key role in designing power distribution systems and preparing accurate cost estimates for construction projects. This is a dynamic opportunity to impact both the technical and financial success of our projects. Key Responsibilities: • Design electrical power distribution systems (service entrance, feeders, panels, lighting, etc.) per NEC and local codes., • Develop one-line diagrams, load calculations, and layouts using AutoCAD, Revit, and related tools., • Conduct lighting design, voltage drop calculations, and coordination studies., • Prepare cost estimates for all design phases, using Accubid or equivalent software., • Analyze construction documents to produce accurate material take-offs and labor estimates., • Collaborate with architects, engineers, and contractors to align design with project budgets., • Respond to RFIs and support construction teams during project execution., • Ensure compliance with applicable codes and promote sustainable design practices. Qualifications: • Bachelor’s Degree in Electrical Engineering preferred; however, candidates without a degree may be considered if they hold a Professional Engineer (PE) license or a Designer of Engineering Systems license, which is preferred in lieu of a degree., • 3–7 years of experience in electrical design and estimating., • Experience in design-build or general contractor environments., • Proficiency in AutoCAD, Revit, Bluebeam, and Accubid (or similar estimating tools)., • Strong knowledge of NEC and construction standards., • Proven ability to manage multiple estimates and designs simultaneously., • LEED certification and BIM experience are a plus. Benefits: • Competitive pay based on experience, • 100% employer-paid health, dental, and vision insurance for both single and family plans, • Employer-paid employee life insurance and short-term disability, • 401(k) with employer match, • Generous paid time off (PTO) and holidays, • Professional development support and training opportunities, • And more! Apply Today! If you’re ready to contribute to high-impact electrical projects and grow your expertise in both design and estimating, we want to hear from you!

Job DescriptionTop Reasons To Work With Our Client : • “Wisconsin’s most trusted team — a century of innovation.”, • “Projects that challenge, inspire, and showcase your skills.”, • “A team that never settles — always pushes boundaries.”, • “Bring your talent to a company that values safety and tech.”, • “Shape the future with a team ready for the next big idea.”Job Type : Full Time Location : West Allis, Wisconsin Pay : Excellent Job Description Job Summary As an Electrical Engineer / Designer, you will play a key role in designing power distribution systems and preparing accurate cost estimates for construction projects. This position offers the opportunity to contribute to both the technical and financial success of projects from design through construction. Key Responsibilities • Design electrical power distribution systems, including service entrances, feeders, panels, lighting, and related systems, in accordance with NEC and local codes., • Develop one-line diagrams, load calculations, and electrical layouts using AutoCAD, Revit, and related design tools., • Perform lighting design, voltage drop calculations, and coordination studies., • Prepare detailed cost estimates throughout all design phases using Accubid or equivalent estimating software., • Review and analyze construction documents to develop accurate material take-offs and labor estimates., • Collaborate with architects, engineers, contractors, and internal teams to align electrical designs with project requirements and budgets., • Respond to RFIs and provide technical support to construction teams during project execution., • Ensure designs comply with applicable electrical codes, construction standards, and sustainable design practices., • Manage multiple design and estimating assignments simultaneously while maintaining accuracy and deadlines. Qualifications • Bachelor’s Degree in Electrical Engineering preferred., • Candidates without a bachelor’s degree may also be considered if they hold a Professional Engineer (PE) license or Designer of Engineering Systems license, which is preferred in lieu of a degree., • 3–7 years of experience in electrical design and estimating., • Experience working in design-build, electrical contracting, or general contractor environments., • Proficiency with AutoCAD, Revit, Bluebeam, and Accubid or comparable estimating software., • Strong working knowledge of the National Electrical Code (NEC) and applicable construction standards., • Demonstrated ability to manage multiple estimates and electrical designs concurrently., • Strong analytical, organizational, communication, and problem-solving skills., • LEED certification and BIM experience are a plus. Our client asked me to submit 3 great people within the next few days. We work directly with the hiring manager and can arrange interviews within a few days Nick Vyas #INDEH123

AI data lab for training frontier models and evaluating AI agents.Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more.AI systems learn, reason, and perform.Our platform identifies and vets top talent through an AI recruiter

Brookwood Group is a boutique owner's representative and program management firm with roots tracing back to 1945.We manage programs across healthcare, education, government, and commercial sectors—always exclusively on the owner's side of the table.We're growing, and we're looking for early-career

Veeva Systems is a mission-driven organization and pioneer in industry cloud, helping life sciences companies bring therapies to patients faster.As one of the fastest-growing SaaS companies in history, we surpassed $2B in revenue in our last fiscal year with extensive growth potential ahead.At the h

Affirm is reinventing credit to make it more honest and friendly, giving consumers the flexibility to buy now and pay later without any hidden fees or compounding interest.Affirm is reinventing credit to make it more honest and friendly, giving consumers the flexibility to buy now and pay later with

We are a devoted and capable team that includes world-renowned engineers and distinguished business leaders united by a common goal – To build the future of predictive maintenance.As we enter the next phase of rapid growth, we are seeking people to help lead the journey.AssetWatch helps industrial

This person serves as the lead electrical engineer and provides technical and design services in support of projects as part of a multi-discipline project team. They will direct and conduct technical evaluations of electrical equipment/systems, control systems, and prepare design computations and

Contáctica is the leading Martech Creative Agency in Puerto Rico, a strong challenger in Latin America, and a dynamic catalyst for growth in the U.For over 20 years we have challenged the .Martech Solutions, and full-spectrum Marketing Agency Services.With headquarters in Puerto Rico and Colombia,

Engineering (Traffic, Civil, Transportation, or Electrical) or Computer.

Pair program with other engineers and collaborate closely with other roles such as product managers and designers.

Strong mechanical and electrical skills.

Project Manager – Mechanical Construction.All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description.A growing mechanical contractor is seeking an experienced.This is an excellent opportunity to join a stable, employee-focus

On Site - Brookfield, Wisconsin, United States.Drywall, Commercial, Steel Stud, Framing, Painting, Acoustic.Find out more about this role by reading the information below, then apply to be considered.About the Construction Company / The Opportunity:.Join a respected and growing commercial constructi

Project Manager - Underground Utilities / Heavy Civil Construction.Please read the information in this job post thoroughly to understand exactly what is expected of potential candidates.We're partnering with a well-established contractor specializing in heavy civil and underground utility constructi

Project Manager (Structural Steel Fabrication).Is this your next job Read the full description below to find out, and do not hesitate to make an application.Competitive health, dental, and vision insurance.Paid time off and company holidays.Career advancement opportunities with a growing steel fabri

Project Manager – Civil Engineering / Construction-.Maximise your chances of a successful application to this job by ensuring your CV and skills are a good match.Up to $125K Base + 10–20% Performance Bonus.We are partnering with a growing civil engineering and construction firm in the Milwaukee

Project Manager (Structural Steel Fabrication).Is this your next job Read the full description below to find out, and do not hesitate to make an application.Competitive health, dental, and vision insurance.Paid time off and company holidays.Career advancement opportunities with a growing steel fabri

Project Manager – Civil Engineering / Construction-.Maximise your chances of a successful application to this job by ensuring your CV and skills are a good match.Up to $125K Base + 10–20% Performance Bonus.We are partnering with a growing civil engineering and construction firm in the Milwaukee

On Site - Brookfield, Wisconsin, United States.Drywall, Commercial, Steel Stud, Framing, Painting, Acoustic.Find out more about this role by reading the information below, then apply to be considered.About the Construction Company / The Opportunity:.Join a respected and growing commercial constructi

Project Manager - Underground Utilities / Heavy Civil Construction.Please read the information in this job post thoroughly to understand exactly what is expected of potential candidates.We're partnering with a well-established contractor specializing in heavy civil and underground utility constructi

Project Manager – Civil Engineering / Construction-.Maximise your chances of a successful application to this job by ensuring your CV and skills are a good match.Up to $125K Base + 10–20% Performance Bonus.We are partnering with a growing civil engineering and construction firm in the Milwaukee

On Site - Brookfield, Wisconsin, United States.Drywall, Commercial, Steel Stud, Framing, Painting, Acoustic.Find out more about this role by reading the information below, then apply to be considered.About the Construction Company / The Opportunity:.Join a respected and growing commercial constructi

Project Manager – Mechanical Construction.All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description.A growing mechanical contractor is seeking an experienced.This is an excellent opportunity to join a stable, employee-focus

Project Manager (Structural Steel Fabrication).Is this your next job Read the full description below to find out, and do not hesitate to make an application.Competitive health, dental, and vision insurance.Paid time off and company holidays.Career advancement opportunities with a growing steel fabri

Project Manager - Underground Utilities / Heavy Civil Construction.Please read the information in this job post thoroughly to understand exactly what is expected of potential candidates.We're partnering with a well-established contractor specializing in heavy civil and underground utility constructi

Project Manager – Mechanical Construction.All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description.A growing mechanical contractor is seeking an experienced.This is an excellent opportunity to join a stable, employee-focus

MSA Professional Services is seeking a Project Manager Field to lead construction-phase services for roadway and infrastructure projects in the Southeast region of Wisconsin.This position is ideal for a skilled field professional who thrives on collaboration, problem-solving, and delivering high-qu

Drinking Water Project Manager.HDR is seeking an experienced Project Manager to help lead Drinking Water projects in our Minnesota/Wisconsin region.Candidates for this position should desire a role in the water/wastewater engineering industry that includes working closely with both clients and inter

Manage multidisciplinary project teams, coordinating engineers, designers, subconsultants, contractors, and other stakeholders.

Lead Commercial Construction Project Manager.My client is one of the most respected general contractors in the midwest and is consistently ranked on ENR's top 100 construction firms in the United States.While this firm is doing $1Billion in annual revenue across multiple states, they currently sit a

Industrial Wastewater Project Manager.At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is valued and respected, a place where everyone is empowered to bring their authentic selves and novel ideas to work every day.As we foster a culture of inclusion

Jacobs is seeking an experienced Senior Project Manager to join our growing Municipal Infrastructure team in Wisconsin.This is an opportunity to lead high-impact projects that improve the transportation networks and public infrastructure serving communities throughout southeastern and south-central

We're hiring for an experienced Project Manager.We're looking for reliable and hard-working individuals that take pride in their work.The Project Manager will oversee ground up commercial construction projects.The Project Manager will be expected to oversee and manage the successful execution and co

We have been retained by a local electrical contractor in the area to find an Electrical Project Manager / Estimator to join their team. Gpac is a national executive search firm specializing in recruitment for the electrical construction industry. Prepare detailed estimates for commercial, industria

We are a team of engineers, hydrologists, scientists, designers, and technicians who work on a variety of projects related to designing, modeling, and developing storm water drainage and management systems for DOT, county, and city projects in the upper Midwest, Class I railroad projects nationwide,

Project Manager (Renewable Energy).Grounded in safety, quality, and ethics, our experts lead their fields with dedication, a creative spirit, and a vision for growth.We draw from more than 20 technical specialties worldwide and are devoted to fostering a community of diverse talents, backgrounds, an