Electrical designer jobs in San Francisco, CaliforniaCreate job alerts

About the Role: As the Hardware Lead, you will serve as the technical cornerstone driving the architecture and implementation of Reconceive’s next-generation analog MAC IP and custom memory. At Reconceive, we believe the future of AI compute relies on achieving unprecedented power and performance through architectural innovation and fundamental analog physics, rather than relying solely on brute-force digital node-scaling. In this cross-functional leadership role, you will operate seamlessly across transistor-level circuit design, physical silicon characterization, and system-level architecture. You will be responsible for the design of highly optimized custom hardware in established commercial CMOS technologies, as well as the development of robust automated pipelines that correlate empirical silicon telemetry with behavioral models for continuous, post-silicon optimization. This role will interface closely with our AI team to co-develop model training capabilities and drive the adoption of AI-enabled automation across the design lifecycle. Responsibilities: • Mixed-Signal Hardware Architecture: Architect, model, and design Reconceive’s analog MAC IP. Champion advanced Design-for-Manufacturing (DFM) practices to aggressively mitigate variation, mismatch, and parasitic challenges inherent to highly optimized mixed-signal compute., • Custom Memory Leadership: Lead the end-to-end architecture, design, and layout optimization of custom, highly efficient SRAM tailored for low-power, high-throughput AI acceleration., • Data Converter Design: Architect high-performance, ultra-low-power data converters (with a strong emphasis on SAR ADCs) and switched-capacitor circuits optimized for stringent system-level power and area constraints., • Behavioral Modeling & Algorithmic Co-Design: Build and maintain high-fidelity behavioral models of the physical hardware. Provide critical feedback to the algorithm and systems teams to guide hardware-aware exploration., • Post-Silicon Characterization & Calibration: Design robust physical characterization protocols. Develop automated data pipelines (Python/MATLAB) with support from our SW/AI team to correlate empirical silicon telemetry with behavioral models, ensuring highly accurate post-silicon predictability., • Silicon Lifecycle Ownership: Perform rigorous feasibility studies to validate performance. Oversee third-party IP integration, chip bring-up, and system-level debugging., • Mentorship & Organization Building: Guide layout teams with strict best practices for parasitic mitigation and device matching. Mentor junior engineers and assist executive leadership with strategic hiring to scale the hardware organization. Qualifications: (Note: We recognize this is a highly multi-disciplinary role. We encourage applications from "T-shaped" engineering leaders who possess world-class depth in core areas—such as Custom Memory or Analog Design—paired with a strong aptitude and desire to master surrounding domains like Python automation and AI co-design.) Minimum Qualifications: • Education & Experience: MS or Ph.D. in Electrical Engineering (or equivalent) with 10+ years of proven, hands-on industry experience. Exceptional track record as a chip lead taking complex mixed-signal/analog designs to volume production., • Foundational Analog Mastery: Deep, practical expertise in system and circuit design. Must demonstrate a first-principles mastery of device physics, variation mitigation, mismatch analysis, and rigorous DFM methodologies, with a proven track record of successful tape-outs in commercial CMOS processes., • Custom SRAM (Mandatory): Extensive, demonstrable experience in the design, layout supervision, and silicon-proven implementation of custom, high-performance SRAM arrays., • Data Converters: Deep expertise designing energy-efficient data converters (with a strong emphasis on SAR ADCs, though experience with algorithmic or pipelined topologies is highly valued) and switched-capacitor circuits., • Data & Automation Proficiency: proficiency in Python and/or MATLAB. with demonstrated ability to build automated characterization pipelines that extract, process, and correlate physical silicon data with high-level system models., • Analog & Digital Design: Extensive experience designing essential analog functions (filters, op-amps, bias circuits, oscillators) and high-speed/low-power custom digital logic., • EDA Tool Mastery: Expert-level proficiency with industry-standard IC design and verification toolchains (e.g., Cadence Virtuoso, Siemens EDA / Calibre, SPICE/FastSPICE simulators)., • Startup DNA: Ability to thrive in a fast-paced, highly ambiguous environment; willing to roll up your sleeves, wear multiple hats, and execute with urgency while laying the groundwork for a scalable hardware team., • Reliability: Strong foundational knowledge of ESD, EMIR, and device lifetime reliability problems and their practical design solutions. Preferred Qualifications: • Experience with variation-aware design and high-sigma yield analysis tools (e.g., Siemens Solido Variation Designer)., • Advanced behavioral modeling experience (e.g., Verilog-A / Verilog-AMS) for mixed-signal system verification., • Direct exposure to machine learning platforms, neural network topologies, and hardware-aware training loops.

Principal Substrate and Packaging Engineer Fully onsite in the San Francisco Bay Area Full time opportunity $400-500K total compensation package- base, bonus, stock (depends on skillset/experience level) Industry leader in semiconductor design focused on advanced IC packaging and high‑speed interconnect technologies. In the role, you will have primarily be responsible for the layout, routing, and functionality of packages and substrates, including design of high-speed lines. What You’ll Do • Design and layout advanced IC packages, substrates, and interposers, including high‑speed signal routing, • Collaborate closely with electrical, mechanical, SI/PI, and program teams during front‑end and detailed layout, • Define layout rules, panelization strategies, and stack‑ups with substrate and package vendors, • Perform peer design reviews and contribute to layout best practices and flow improvements, • Execute DRC and LVS checks to ensure layout correctness, • Support post‑fab evaluation, including visual inspection, electrical validation, and high‑speed characterization, • Develop and apply script‑based layout automation to improve efficiency and quality, • Simulate layouts and recommend design optimizations to meet performance and reliability targets Required Background • BS/MS/PhD in Electrical, Computer, Mechanical Engineering, or related field, • 10+ years of hands‑on experience in IC substrate and package layout, • Deep expertise with EDA layout tools, such as: Calibre/Klayout, Cadence Allegro Package Designer, Innovus and Virtuoso, • Multilayer and high‑speed layout, • RF design fundamentals, • Package/substrate manufacturing processes and materials, • Surface‑mount technology (SMT)

IA Interior Architects translates client goals, brand and culture into powerful environments built around people, processes, technologies and business drivers. Our clients in diverse markets worldwide require high-performance, visually compelling and sustainable environments to move their enterprise forward, support their culture, engage their staff, integrate technology and drive efficiencies. As architects, designers, workplace strategists and environmental specialists in the largest global architecture firm concentrating exclusively on interiors, we help clients articulate and align their business strategies and core values with the dynamic use of space. Our team members are collaborative, creative, professional, expert and entrepreneurial. Joining our team requires skill, daring, leadership, teaming, humor and a love of interiors. We are presently searching for a Lighting Designer for our San Francisco Studio. The Lighting Designer, working under the leadership of a more senior Lighting team member or Project Manager, designs and develops architectural lighting from schematic through construction documents. May also be involved in design strategy and concept development depending on level of experience. Other responsibilities include: • Actively participates in and oversees the design, development and production of Lighting Designs, • Prepares lighting plans, lighting schedules, specifications, sections, elevations and drawing packages, • Creates innovative, creative and complete design concepts and may present to clients, • May mentor the work of Junior and Intermediate Lighting Designers Qualifications: • Bachelor's degree in Architecture, Interior Design, Lighting Design, Industrial Design; equivalent experience may be substituted, • 5+ years of experience or equivalent educational experience: architectural lighting design; custom light fixture design, detailing for lighting and 3D design/visualization Knowledge, Skills, and Abilities: • Demonstrated competency in all phases of architectural lighting, • Expert knowledge of working drawings and procedures, • Knowledge of electrical principles as they relate to artificial lighting, • Intermediate knowledge of lighting control systems, energy codes, and energy-efficient design principles, • Proven ability to work collaboratively, • Intermediate presentation and graphic communication skills As well as Advanced skills and/or knowledge in the following areas: • Knowledge of lighting products, • Sketching and rendering skills, • Revit skills, a plus, • Lighting calc skills (AGI132, Elumtools or similiar), • Adobe Creative Suite skills, • Verbal and written communication skills Salary: $70,000 - $90,000 annually, pending licensing, education, and industry experience.

About Us Foundation is developing the future of general purpose robotics with the goal to _ Our mission is to create advanced robots that can operate in complex environments, reducing human risk in conflict zones and enhancing efficiency in labor-intensive industries. We are on the lookout for extraordinary engineers and scientists to join our team. Your previous experience in robotics isn't a prerequisite — it's your talent and determination that truly count. We expect that many of our team members will bring diverse perspectives from various industries and fields. We are looking for individuals with a proven record of exceptional ability and a history of creating things that work. Our Culture We like to be frank and honest about who we are, so that people can decide for themselves if this is a culture they resonate with. Please read more about our culture here _. Who should join: • You like working in person with a team in San Francisco., • You deeply believe that this is the most important mission for humanity and needs to happen yesterday., • You are highly technical - regardless of the role you are in. We are building technology; you need to understand technology well., • You care about aesthetics and design inside out. If it's not the best product ever, it bothers you, and you need to “fix” it., • You don't need someone to motivate you; you get things done. Why We Are Hiring for This Role: • Own the end-to-end design of custom PCBs for robotic hand controllers, including schematics, layout, and BOM selection., • Develop new custom force and tactile sensors for robotics with aggressive size and reliability requirements., • Design and evaluate embedded systems and mixed-signal circuits (MCUs, FPGAs, sensors, power, communications)., • Collaborate with silicon partners to evaluate and integrate cutting-edge chips (e.g., motor drivers, IMUs, tactile sensors)., • Perform board bring-up, validation, and debugging using lab instruments and test infrastructure., • Guide junior engineers and review schematic/layout work to ensure performance, reliability, and compliance., • Drive continuous improvements in design for manufacturability (DFM), testability (DFT), and electromagnetic compatibility (EMC)., • Interface with firmware/software engineers to define board-level APIs and support hardware abstraction., • Support the transition from prototypes to production, working with contract manufacturers and test engineers., • Stay up to date with emerging technologies in embedded electronics, robotic sensing, and motor control. What Kind of Person We Are Looking For: • Experience with sensor integration (IMUs, force/tactile, encoders), motor control (BLDC, brushed, stepper), and power electronics., • Proven track record designing embedded systems (MCUs, DSPs, or FPGAs) in compact, high-reliability systems., • Strong debugging skills with oscilloscopes, logic analyzers, and JTAG tools., • Proficiency in ECAD tools such as Altium Designer, KiCad, or Cadence., • Solid understanding of signal integrity, thermal management, and power distribution for compact electronics., • Familiarity with firmware interactions and embedded C/C++ is a plus., • Experience working on robotics, prosthetics, or haptics-related hardware., • Knowledge of silicon evaluation and working with early-stage chip vendors., • Experience with wireless communication (BLE, Wi-Fi, etc.) and secure hardware design., • Exposure to safety standards (IEC, ISO) and EMI/EMC compliance testing., • Bachelor’s or Master’s in Electrical Engineering or a related field. Benefits • We provide market standard benefits (health, vision, dental, 401k, etc.) and equity. Join us for the culture and the mission, not for the benefits. Salary • The annual compensation is expected to be between $180,000 - $300,000. Exact compensation may vary based on skills, experience, and location.

Senior/Lead Plumbing Designer – MEP Consulting Engineering 📍 San Francisco Bay Area (Hybrid) We are seeking a Senior/Lead Plumbing Designer to join a highly technical MEP consulting team in the San Francisco Bay Area. This is a hands-on design role with leadership responsibility, focused on delivering complex plumbing systems for commercial, healthcare, and institutional projects. This role is best suited for an engineer/designer who wants to stay deeply involved in design while taking ownership of project coordination, technical execution, and delivery quality. 🏗️ Key Responsibilities • Design plumbing systems including:, • Domestic water systems (cold/hot water, booster systems, recirculation), • Sanitary waste and vent systems, • Storm drainage systems, • Natural gas systems (as applicable), • Develop SD, DD, and CD construction documents using Revit, • Perform plumbing calculations, equipment sizing, and system layout development, • Coordinate plumbing design with mechanical, electrical, structural, and architectural teams, • Lead technical resolution of design issues during coordination phases, • Review shop drawings, RFIs, and submittals during construction administration, • Support site visits and field coordination as required, • Assist in maintaining internal QA/QC standards for deliverables, • Mentor junior designers and contribute to technical development of the team 🎯 Qualifications • 5–10+ years of plumbing design experience in MEP consulting engineering, • Strong experience in commercial, healthcare, high-rise, or institutional projects, • Proficiency in Revit and AutoCAD, • Strong understanding of plumbing codes (UPC / CPC / NFPA as applicable), • Experience producing construction documents and supporting construction administration, • Strong coordination skills across multiple disciplines ⭐ Preferred Experience • EIT or PE license (not required but strongly preferred), • Healthcare project experience (hospitals, outpatient, surgical centers), • High-rise residential or mixed-use developments, • Experience in large-scale BIM coordination environments 💰 Compensation & Benefits • $135,000 – $175,000 base salary (DOE), • Performance bonus potential, • Full benefits package (medical, dental, vision), • 401(k) with employer contribution, • Hybrid work flexibility (project-dependent), • PTO + paid holidays 🚀 Why This Role This is a true technical growth role, not just production support. You will: • Work on complex, high-visibility Bay Area building projects, • Stay hands-on in design while growing leadership responsibility, • Collaborate with experienced engineers across multiple disciplines, • Gain exposure to healthcare, commercial, and institutional work at a high level, • Be part of a team that values technical quality and design ownership

Description The Senior Controls Design Engineer is responsible for leading the design and development of complex HVAC/industrial control systems, with a strong focus on PLC logic design, HMI/SCADA architecture, and electrical control systems engineering. This role emphasizes upfront design, programming, and documentation using industry-standard platforms including Rockwell Automation, Emerson, GE, Schneider Electric, Ignition and others. The position requires strong understanding of systems, and a commitment to delivering high-quality design packages and control solutions. In this position your duties will include: • Developing PLC logic design and programming based on control narratives, sequences of operation, and project requirements., • Designing HMI/SCADA system architecture, graphics, and standards., • Creating and reviewing detailed electrical control schematics and panel designs., • Preparing design documentation including I/O lists, network architectures, control narratives, and bill of materials., • Supporting field activities such as commissioning, functional testing, and design validation., • Integrating systems using a wide variety of serial and Ethernet-based industrial communication protocols., • Leading and/or supporting Factory Acceptance Testing and design reviews., • Supporting proposal development, including reviewing plans, specifications, and scope documents., • Presenting technical designs and solutions to customers and internal stakeholders., • Preparing technical reports, and design deliverables. Position Parameters: This role requires approximately 30% national travel, including travel to client sites, regional offices, and project locations as needed to support business operations. • 7+ years of PLC/PAC logic design and programming experience using IEC-61131 languages., • 7+ years of HMI/SCADA system design experience, including multi-node or distributed architectures., • 5+ years of electrical design experience related to control panels and industrial automation systems., • Demonstrated experience with industrial communication protocols including Modbus TCP/IP, Ethernet/IP, PROFINET, and serial equivalents., • Strong written and verbal communication skills., • Bachelor’s degree in electrical engineering, Mechanical Engineering, Robotics, Computer Science, or related field; or equivalent demonstrated experience. Preferred Certifications (or willingness to obtain): • Rockwell Automation Certified Programmer or equivalent RA technical certifications (e.g., ControlLogix/Studio 5000)., • Siemens or Schneider Electric automation certifications., • ISA certifications such as ISA CAP (Certified Automation Professional)., • Ignition (Inductive Automation) Core or Gold Certification., • UL 508A Industrial Control Panel certification familiarity (designer-level knowledge)., • OSHA 10 or OSHA 30 safety certification. Salary Range: $140k - $160k/yr. DOE. Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Electrical Designer - Healthcare Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Healthcare facilities, with knowledge of California building codes, OSHPD/HCAI requirements, and energy efficiency standards. This role also involves collaborating with architects, project managers, and contractors to design, specify, and deliver reliable electrical systems that meet the unique needs of Healthcare environments. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a high-level technical role responsible for driving electrical project delivery and engineering quality across large and complex projects. This individual is an electrical system expert, Revit authority, and go-to mentor within the discipline. They are expected to guide project teams through all design phases, resolve complex coordination challenges, and ensure quality and consistency across documentation. The Electrical Designer serves as a bridge between technical execution and strategic planning and is expected to influence standards, coach team members, and represent the firm in advanced technical discussions with clients and consultants. Essential Functions: • Lead the production and coordination of full electrical design packages for large-scale or highly complex projects., • Standardize Revit workflows across teams and lead development of firmwide modeling resources, families, and templates., • Resolve advanced technical modeling challenges and mentor staff in efficient BIM strategies for electrical systems., • Review and approve project documentation for compliance with code, performance objectives, and client requirements., • Author and edit electrical project narratives, design briefs, and owner-facing documents with minimal oversight., • Integrate multiple complex systems across disciplines; resolve electrical system conflicts with other discipline teams., • Perform advanced electrical system analysis, including lifecycle assessments, decarbonization strategies, and code interpretations., • Lead project lighting simulation or energy modeling coordination to inform electrical system decisions., • Develop and implement firm tools for electrical load calculations, system sizing, and code compliance checking., • Define project design strategies, workflows, and milestone deliverables in collaboration with engineers and project managers., • Independently scope and plan project phases, including resourcing and delegation across disciplines and offices., • Ensure technical delivery aligns with project budgets, schedules, and quality expectations., • Provide cross-project mentorship in system design, QAQC strategies, and advanced documentation techniques., • Guide emerging designers and engineers in technical decision-making and problem-solving approaches., • Develop structured onboarding or training content for new electrical staff or designers., • Model team collaboration and delegate electrical design work strategically to grow others’ confidence and capability., • Lead technical segments of client and consultant meetings related to electrical systems, including design presentations and technical decision-making forums., • Communicate clearly and confidently about technical decisions, trade-offs, and performance metrics with diverse audiences., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Influence client and project partner expectations around technical scope, documentation quality, and system performance., • Travel to client meetings, existing buildings or construction sites on occasion (Local - once per week during certain phases of a project, overnight - once or twice per month). Requirements • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Familiarity with California HCAI/OSHPD agency, processes and requirements preferred., • Experience with Kaiser Permanente projects preferred., • 10+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionDescriptionNICOLEHOLLIS, an award-winning, large size Interior Design firm seeks a talented and motivated Project Designer to assist our Residential Design Team. The ideal candidate will have 4-6 years of experience in the architecture and design industry, focusing on high-end residential design. KEY RESPONSIBILITIESSchematic Design, Design Development, and Construction Document Phase Responsibilities • Research and develop construction documents, drawings, elevations, details, specifications package, moodboards, renderings, design presentation for residential and/or hospitality project(s), to illustrate non-structural and/or non-seismic partition layouts; power and communications locations; reflected ceiling plans and lighting designs; materials and finishes; and furniture layouts, • Formulate preliminary space plans and two- and three-dimensional design concept studies and sketches that integrate the client's needs and are based on knowledge of the principles of interior design and theories of human behavior, • Assist with the implementation of interior design solutions for each project from concept stage through installation, • Confirm that preliminary space plans and design concepts are safe, functional, aesthetically appropriate, and meet all public health, safety and welfare requirements, • Adhere to regional building and fire codes, municipal codes, and any other jurisdictional statutes, regulations and guidelines applicable to the interior space, • Select colors, materials and finishes to appropriately convey the design concept, functional, life-cycle performance, environmental, and safety requirement, • Prepare specifications and schedules with accurate product information for all millwork, casework, appliances, plumbing, hardware, bath accessories, and interior finishes, • Coordination and collaboration with other design professionals who may be retained to provide consulting services, including but not limited to architects; structural, mechanical and electrical engineers, and various specialty consultants Construction Administration Phase Responsibilities • Participate in performing field visits/measurements and construction administration services including site visits, responding to RFIs, reviewing control samples and shop drawings, coordinating with consultants, manufacturers, and contractors, and completing and following up on punch list General Responsibilities • Create, implement, and provide training and training resources for company-wide standards, • Responsible for organization of project folder and ensuring filing system adheres to company standards, • Participate in the management of the interior design resource library and maintain vendor contacts for interior furnishings, fixtures and finishes, • Support project needs, including (but not limited to) meeting preparation, printing and binding presentations, wrapping, packing and shipping material samples, project filing, and creation of calendar invites and zoom links, • Mentor Design Assistants and Interns, and assist with coordinating Design Assistant and Intern project workload needs under the direction of Project Lead SKILLS, CORE COMPETENCIES, & PHYSICAL REQUIREMENTSSKILLS • Degree in Interior Architecture or Interior Design, • Minimum of 4 to 6 years interior design experience, • Comprehensive knowledge of Interior Architecture (IA) scopes in residential and hospitality design standards through all phases (Schematic Design, Design Development, Construction Documentation, and Construction Administration), • Proficiency in AutoCAD, Adobe InDesign and Photoshop, Microsoft Suite, Sketchup (or similar 3D modeling software). Enscape (or alternative rendering software) and SpecSources proficiency a plus, • Knowledge in creation of construction drawings, specifications and schedules, • Knowledge of specification writing, • Knowledge of trade resources, fabricators, and vendors, • Experience selecting and specifying lighting, furnishings, hardware, floor/window coverings, materials, and finishes, • Ability to interact effectively with the design team on multiple projects, • Must have excellent customer service and public speaking skills; be comfortable in interfacing with clients, consultants, vendors and internal staff, • Must be collaborative, self-motivated, positive, and flexible with strong verbal and written communication skills CORE COMPETENCIES • Task Focus: Delivers legendary service to clients and vendors that meets and exceeds expectations, • Ethics & Integrity: Adheres to the Company values, beliefs, and principles of innovation and excellence in design, • Composure: Remains calm, maintains perspective, and responds in a professional manner when faced with tough situations, • Personal Learning: Takes personal responsibility for the continuous learning of new knowledge, skills, and experiences, • Dealing with Ambiguity: Able to successfully function during times of uncertainty and changing priorities, • Decision-Making: Makes keen, timely decisions based on a mixture of analysis, wisdom, experience and judgment, • Interpersonal Savvy: Builds effective relationships with all people up, down and sideways, inside and outside of the Company, • Results Oriented: Gets results and achieves goals PHYSICAL REQUIREMENTS • This position will be working in a typical office setting, with no extremes in temperature or lighting, • Able to occasionally travel and present at offsite locations in the Bay Area, • Applicants should be able to work with equipment typically found in an office and should be able to perform the essential functions of the job, with or without accommodation. Possible accommodations needed should be discussed prior to the onset of employment and/or the interview process, • Ability to lift 25lbs and transport items in and out of vehicles. Ability to work on feet/run errands for 4+ hours per day as needed. Ability to sit at a desk for 6+ hours per day BENEFITS • Full Healthcare Coverage, • 401(k) Safe Harbor Matching, • Pre-Tax Flexible Spending Account, • Pre-Tax Transit Management Account, • Pre-Tax Traditional IRA Savings Account, • Paid Time Off, • Monthly Cell Phone Use Allowance, • Monthly Health and Fitness Allowance, • Remote Work Policy, • Mondays to Thursdays: In-Studio, • Fridays: Remote / Work From Home

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. We are looking for an Electrical Engineer II - III in our San Francisco, CA or Sacramento, CA offices. Job Responsibilities As an Electrical Engineer II- III you will be responsible for creating basic designs under the direction of senior engineers and/or senior designers, performing equipment selections, and load/energy and pressure drop calculations for a variety of projects and project sizes. Individuals in this position must demonstrate the ability to progress from basic design work assignments to more complicated and involved projects working in conjunction with a technical team. Additional responsibilities include: • Conducts field inspections to determine existing conditions and to coordinate new work then assists Senior Engineer in preparation of due diligence, feasibility, gap analysis and other technical reports and drawings., • Coordinates with other disciplines and work in close contact with the entire design team, • Creates basic designs under the direction of the senior engineer and/or senior designer perform equipment selections, load/energy and pressure drop calculations for a variety of projects and project sizes, • Represent Syska Hennessy Group and work in close contact with and effectively interact with the internal design team as well as external clients and consultants (including owners, builders, developers, program managers, architects, vendors, etc.), • Master drawing organization format and company standards, • Assists senior engineer and/or senior designer in the on-going determination of project scheduling requirements, manpower requirements, and project budgets., • Assists the senior engineer / senior designer in processing RFI's, Change Orders, Bulletins, and Addenda, • Begins to establish system application, design, and operational parameters / sequences under the direction of the senior engineer and/or senior designer., • Creates basic designs under the direction of the senior engineer and/or senior designer, develop specifications, system narratives and system layouts for a variety of projects and project sizes., • Participates in / Ensure / Oversee QA/QC process for your work and the work of others., • Performs construction administration and field investigation tasks for assigned projects including conducting field inspections and subsequent detailed inspections reports., • Represents Syska Hennessy Group and works in close contact with and effectively interact with the internal design team as well as external clients and consultants (including owners, builders, developers, program managers, architects, vendors, etc. Job Requirements Successful candidates for the Electrical Engineer role should demonstrate strong REVIT, and MEP skills from mark-ups through the production of detailed drawings, and have basic knowledge of construction documentation and design phase requirements. Someone with knowledge of trade specific design and calculation software including energy analysis software (eQuest, Trace, etc.) would be a good fit for this dynamic role. Additional requirements include: • Bachelor's Degree in Electrical Engineering from an Accredited Institution, • Minimum of 2 to 7+ years of relevant experience in the MEP field working with projects such as Aviation, Healthcare, Commercial, and Mission Critical., • Latest version of AutoCAD MEP and REVIT required, • Basic understanding of proper system selection, • Basic knowledge of applicable codes, • EIT certification required., • Experience in Mission Critical, Science + Technology, Healthcare and interest in Project Management greatly preferred. Benefits As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership of their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. California Pay range$66,249—$143,090 USD

Job Description Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. We currently have an entry level opportunity for an Electrical Engineering Graduate. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities: As an entry level engineer, you will support our engineering teams working toward our designs that are inspiring, demanding, and highly collaborative. You will learn from others, and they will expect to learn from you. You will share in the responsibility, rewards, and recognition of producing truly innovative solutions and complete client satisfaction. Some responsibilities include: • Create basic designs under the direction of the senior engineer and/or senior designer, • Learn drawing organization and company standards., • Perform CAD/BIM drafting for a variety of projects and project sizes to begin to understand architectural engineering design and documentation., • Coordination with the designs of other trades (architectural, engineering / internal, and external) under the guidance of more senior technical staff, • Support the design and engineering efforts of systems for new installations, system retrofits, system replacement, and system upgrades for a wide variety of projects and project types., • Take ownership of the completeness, accuracy, and timeliness of the work assignments., • Assist engineers with field investigations and construction site visits to observe and attend project coordination meetings., • Participate and regularly attend the EDT program training sessions and support activities that are part of the EDT program, • Attending our Engineering Development Program continuing education seminars on technical and professional enhancing topics. Job Requirements: The ideal candidate will enjoy a team environment and be flexible enough to work independently where needed. Candidates for this role will be eager to learn and will expand their knowledge and hands-on experience by challenging themselves and using the highly technical resources around them. Additional job requirements: • Bachelor's Degree from an accredited university in Electrical engineering, or Architectural Engineering with a graduation date of Winter 2025, Spring or Summer of 2026, • Previous engineering internship, a plus, • Knowledge of the latest version of MEP Auto CAD; REVIT experience is a plus., • Proficient in design and calculation software; MS Office Suite, • FE. or EIT Preferred. Benefits: As an employee at Syska Hennessy, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. Our Company is committed to developing engineers into respected technical experts and versatile business leaders through our Engineer Development Program (EDT). About the EDT Program Recent graduates interested in our Engineering Development Training (EDT) program can expect to participate in an accelerated, but thorough training curriculum. This curriculum will teach not only the technical aspects of our profession, but industry specific business aspects as well. Our senior engineers will work closely with each participant to foster a strong mentor/apprentice relationship. This time-honored program is a trademark of Syska's commitment to the development and education of young engineers through mentoring and technical training. As a member of our highly collaborative team, we provide our full-time employees with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we have cultivated a community that supports learning and provides guidance for professional development and furthering our culture of excellence. We promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership of their work and development and strive to continually improve themselves and our firm. We rely on the talent, drive, enthusiasm and the total job satisfaction of the great people who work here for our success! Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. California Pay range$65,155—$97,733 USD

Job DescriptionElectrical Engineer Electrical Engineer We are an innovative, investor-backed medical device manufacturing company committed to revolutionizing therapies for vascular conditions and lymphedema. Our cutting-edge wearable devices promote patient movement and independence, providing better results than conventional compression methods. Become part of an energetic, supportive team in a vibrant growth-phase setting that prioritizes honesty, modesty, diligence, teamwork, and enjoyment. With production scaling quickly, we emphasize ongoing enhancement to positively affect patient outcomes. Location: Hybrid in Oakland Key Responsibilities • Develop and review electronic schematics and PCB/PCA designs using Altium and other CAD tools., • Create and optimize analog and digital circuit designs for performance, cost, and manufacturability., • Collaborate with firmware engineers to define hardwaresoftware interfaces and support Nordic firmware development and C/C++ driver development., • Perform prototype bring-up, debugging, and validation testing; characterize circuits and resolve hardware issues., • Define and implement fabrication-ready PCB layouts, DFM/DFT guidelines, and BOM management for volume assembly., • Develop and maintain clear design documentation, schematics, layout notes, and test procedures., • Work with suppliers and fabrication partners to qualify components, PCBs, and assemblies; coordinate design for fabrication and assembly., • Run signal integrity, power integrity, and EMC/EMI analyses and implement mitigation strategies., • Participate in design reviews, risk assessments, and cross-functional project planning to meet cost, schedule, and quality targets., • Mentor junior engineers and contribute to continuous improvement of design processes and best practices. Qualifications • Bachelors or Masters degree in Electrical Engineering or related field., • 3+ years of professional experience in electronic hardware design, including schematic capture and PCB/PCA design., • Strong experience with Altium Designer or equivalent PCB CAD tools., • Proven background in analog circuit design (power management, sensors, amplifiers) and digital circuit design (microcontrollers, peripherals, interfaces)., • Hands-on experience with Nordic SoCs and firmware development, including C/C++ and driver development., • Familiarity with fabrication processes, DFM/DFT practices, PCB stack-up design, and working with fabrication houses., • Experience with prototype bring-up, lab instrumentation (oscilloscopes, logic analyzers, spectrum analyzers), and debugging methodologies., • Knowledge of EMC/EMI considerations, signal and power integrity, and regulatory compliance processes., • Excellent problem-solving, communication, and teamwork skills; ability to manage multiple priorities and meet project milestones., • Preferred: experience with embedded firmware toolchains, version control, and automated test frameworks; prior involvement in product qualification and production handoff. Benefits • 401K with match, • Bonus, • Health, Dental, Vision, LTD, and HSA, • 3 weeks PTO + 11 holidays - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 03/27/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Job DescriptionDescription: About GRID Alternatives GRID Alternatives is a national leader in making clean, affordable solar power and solar jobs accessible to low-income communities and communities of color. GRID is an entrepreneurial, high-growth non-profit organization that provides direct solar installation and project development; clean mobility options; workforce training and service-learning opportunities; and low-income solar policy advocacy. Our Vision: a rapid, equitable transition to a world powered by renewable energy that benefits everyone. Our Mission: to build community-powered solutions to advance economic and environmental justice through renewable energy. What it's like to work at GRID… At GRID, we care about each other and know that each employee has a whole self that includes life outside of work. Our culture supports learning, growth and well-being of all of our team members. Summary of the role: The Senior Commercial Design Engineer is a senior individual contributor role within GRID Alternatives’ commercial design team, reporting to the Commercial Design Manager. This position plays an important role in delivering high-quality, code-compliant designs for multifamily and light commercial projects, with most systems in the 50 kW–500 kW range. Rooftop solar is the core scope of this role, with additional opportunities to work on carport solar, battery-enabled microgrids, and EVSE infrastructure as GRID continues to diversify and expand its commercial portfolio. In this role, you’ll collaborate closely with other senior designers, junior designers, project managers, construction staff, and development teams to support design development, costing and estimating, and project execution. You’ll contribute technical expertise throughout the project lifecycle while also helping improve design standards, tools, and processes as the program grows. This role is ideal for an experienced commercial solar designer who enjoys solving complex technical problems, working collaboratively across teams, and contributing to a thoughtful, mission-driven organization. Job Duties include, but are not limited: • Produce complete design packages for utility and AHJ submittals for commercial solar and solar-plus-storage projects, generally ranging from 50 kW to 500 kW, • Develop CAD layouts, electrical diagrams, stringing plans, calculations, elevations, details, and bills of materials based on project requirements, • Support early-stage project development through technical input for project costing and estimating, • Serve as a key technical resource within the commercial design team, assisting with design questions, code interpretation, and troubleshooting, • Perform quality assurance reviews of colleagues’ work to ensure accuracy, constructability, and code compliance, • Clearly communicate design intent, assumptions, and constraints to internal teams and external partners, including project managers, construction teams, utilities, and AHJs, • Provide technical guidance and mentorship to junior designers through reviews, feedback, and informal training, • Contribute ideas and feedback on design standards, templates, tools, and workflows in partnership with the Commercial Design Manager and peers, • Coordinate with external engineering vendors as needed to support project deliveryRequirements: Technical experience • 5+ years of experience designing grid-tied commercial and/or multifamily solar projects, including solar-plus-storage, • Deep understanding of commercial PV system design, component selection, and production modeling, • Strong proficiency in AutoCAD and Excel, with experience using tools such as HelioScope, Aurora, PV Watts, NREL SAM, PVsyst, or similar, • Experience producing utility- and AHJ-ready plansets, including calculations, details, and as-built documentation Collaboration & communication • Ability to clearly explain technical concepts and design decisions to a range of audiences, • A collaborative working style that values shared problem-solving, consensus-building, and alignment across disciplines, • Comfort giving and receiving feedback in service of team goals and project outcomes Quality & judgment • Strong attention to detail and a quality-focused mindset, • Ability to exercise sound technical judgment while working within established standards, processes, and decision frameworks, • Growth & mindset, • Curiosity and interest in improving tools, templates, and workflows, • Openness to feedback from peers, construction teams, and managers, • Interest in mentoring and supporting junior designers as part of a collaborative team Compensation: The compensation range for this fulltime, exempt position is $90,000-$100,000. The base pay that will actually be offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Benefits: Medical, Dental, Vision/Eye Care insurance, 5 weeks paid time off (PTO),13 paid holidays, Commuter Checks, 403b Retirement Plan, Employee Assistance Program (EAP), Flexible Spending Account (FSA), Health Savings Account (HSA), STD, LTD, and AD&D insurance Where you will sit & the places you may go… The ideal candidate will sit in the United States (remote). This position may require up to 25% out-of-town travel to regional offices and special projects such as org-wide celebrations, team building exercises, etc. Availability to work nights and weekends may very rarely be required. GRID Alternatives may provide vehicles for work travel and/or travel reimbursement for personal vehicle use. In this instance, applicants must hold a valid driver’s license and have a good driving record. Important to note for California applicants: **Hired CA candidates must be able to pass a screening for drugs that are illegal in the state of California, including: amphetamine, cocaine metabolite, opiates, and PCP. Reasonable Accommodation for Job Seekers with a Disability: If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to: RECRUITING@GRIDALTERNATIVES.ORG Ready to Apply? Submit a resume describing your interest. Due to the high volume of inquiries, mailed and emailed applications are not accepted. GRID Alternatives provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability or genetics. Because we value EID at GRID Alternatives, we encourage folks from all backgrounds to apply, even if you do not meet all of the preferred qualifications. Every member of GRID Alternatives must be dedicated to participating in the organization's equity, inclusion, and diversity (EID) work.

Job Description Qualifications: • Bachelor's degree in Electrical Engineering or related field, • 2+ years of professional experience in hardware development or embedded systems design, • Experience with schematic capture and PCB layout for multi-layer boards, • Experience with microcontroller-based system design (ARM Cortex-M, MSP430, or similar) and standard digital interfaces (I2C, SPI, UART, USB), • Hands-on experience with board bring-up, debugging, and rework on high-density designs (0201, BGA, etc.), • Proficient with standard lab equipment (oscilloscopes, logic analyzers, multimeters, power supplies, soldering equipment, hot-air rework stations), • Proficiency with Altium Designer, • Experience with designs including battery management, Bluetooth LE, high-voltage circuits, and analog design, • Experience working in medical device development or highly regulated industry (aerospace, automotive), • Familiarity with EMI/EMC best practices and certification processes (FCC, CE, UL), • Basic proficiency in Python for test automation or C/C++ for firmware modifications, • Experience transitioning designs to manufacturing and applying DFM best practices Responsibilities: • Drive electrical design of embedded systems including component selection, schematic capture, and PCB layout for multi-layer, high-density boards, • Work at all stages of product development process from exploration and prototyping to detailed design, testing, and ramping to mass production, • Collaborate closely with mechanical, firmware, and senior electrical engineers on system architecture and integration, • Ensure design quality and meet medical device regulatory requirements with clear documentation and robust testing, • Support manufacturing and sustaining engineering by improving designs for reduced cost or improved manufacturability, and assist with failure analysisCompany DescriptionSince 2006, SoloPoint Solutions has helped hundreds of high-tech companies to identify, qualify and secure critical resources to ensure the success of their engineering and development process. To see all our open jobs, visit this website: https://jobs.solopointsolutions.com/ We greatly appreciate your interest in our positions and encourage you to apply. Please note: By applying to our job postings, you agree to receive communications from SoloPoint Solutions regarding this and other relevant jobs, as well as employment and industry-related news and updates. We look forward to working with you!Since 2006, SoloPoint Solutions has helped hundreds of high-tech companies to identify, qualify and secure critical resources to ensure the success of their engineering and development process.\r\n\r\nTo see all our open jobs, visit this website: https://jobs.solopointsolutions.com/\r\n\r\nWe greatly appreciate your interest in our positions and encourage you to apply.\r\nPlease note: By applying to our job postings, you agree to receive communications from SoloPoint Solutions regarding this and other relevant jobs, as well as employment and industry-related news and updates.\r\nWe look forward to working with you!

Job DescriptionAbout Humble RoboticsWorking at Humble Robotics means taking on the biggest change in ground transportation in decades. We’re building an autonomous, zero-emissions hauler that dramatically lowers the cost of freight with groundbreaking vision-based AI, designed for today’s global logistics network. We’re a fast-moving, close-knit team of AV industry veterans and innovative thinkers. We don’t believe culture can be engineered – but when it falls into place, it’s a once-in-a-lifetime adventure. Progress has never felt so present. Position OverviewOwn electrical design of next gen. hardware modules - architecture, schematic + layout prototype bring-up, validation, and transition to robust hardware. Key Responsibilities • Schematic capture and layout - power tree, high-speed interfaces, protection, grounding strategy, tolerances, derating. Produce release-quality design packages., • Prototype bring-up and debug: First power-on through stable system operation; instrument, isolate, and resolve issues across power integrity, signal integrity and EMI coupling., • Design for automotive robustness - transients/ESD, brownout behavior, fault containment, harness realities, and vehicle power conditions; incorporate EMC and functional safety considerations appropriate to the platform., • Design Validation: Define bench + vehicle validation plans (stress, thermal, vibration-informed checks, fault injection where relevant)., • Own PCB fab/assembly engagement, component selection strategy, alternates, DFM/DFT reviews, and build/test documentation; drive issues to closure through builds., • Unblock integration across teams, and drive design reviews and root-cause for complex failures., • Partner with firmware, autonomy, and systems to debug end-to-end issues; set best practices for bring-up, lab workflows, and design reviewsMinimum Qualifications, • BS/MS in Electrical, Computer or Mechatronics Engineering, • 8+ years relevant hardware engineering experience (or equivalent scope/impact), • Proven ownership of multiple PCB designs shipped into real systems, • Strong power design fundamentals (switching regulators, sequencing, protection, thermal/derating), • Comfort with mixed-signal + digital design tradeoffs; strong debug skills, • Expert in Altium Designer (schematic + constraints + outputs; ability to guide and perform layout review), • Eligible to work in the United StatesPreferred Qualifications, • Experience in Automotive/ Robotics/ Industrial/ Aerospace strongly preferred., • High-speed design and RF experience, • Sensor platform integration experience (Camera, Radar, Lidar, IMU, GNSS), and timesync, • Familiarity with DFM/DFT and production test strategy, • Embedded firmware competence (C/C++/Python) for board bring-up automation and validationCompensationSalary ranges are determined by role, level, and location. Within the range, individual pay is determined by additional factors, including qualifications, skills, experience, and location. We also offer competitive equity compensation and benefits.As part of the interview process, we may use Artificial Intelligence (AI) tools to compare your qualifications and experience to the job description. A human reviews all AI output and makes a final hiring decision. Humble Robotics does not rely on the output to make any employment decisions. Some applicants may have a legal right to opt-out of the use of AI as part of our interview process. Contact legal@humblerobotics.ai to exercise this right or if you have further questions on the use of AI tools in our hiring process. Humble Robotics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Humble Robotics will consider qualified applicants with arrest and conviction records in a manner consistent with local ordinances. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: About CRI: Over the past 30+ years, CRI has partnered with countless companies to create workplaces that become ecosystems for imagination, inspiration, and ideas. In the landscape of ever-changing office design, we strive to create resilient workplaces that become launch pads for teams to feel excited, motivated, and encouraged to do their best work. Our expertise is built upon a solid foundation of workplace strategy and furniture design, project management, and client advocacy. We are passionate about our values and strive to be an example of excellence in all that we do. About the Role: As a CRI Designer, you will turn strategy and intent into precise, orderable documentation. You’ll lead CAD deliverables that enable space plans, specifications, electrical/data layouts, and installation packages – while collaborating with Sales, Project Management, Ancillary/Workplace Strategy, vendors, A&D partners, and field teams. You’ll own the technical integrity of drawings and specs, validate code and site constraints, and present clear, client ready documentation that makes downstream work (pricing, ordering, installation) seamless. This role is eligible for our Flexible Workplace policy, where there is an expectation to work from our San Francisco office minimum of 3 day a week after successful completion of the Introductory Performance Period. Summary of Responsibilities: • Acknowledge and triage Creative Services Requests (CSR); confirming scope, deadline, and deliverables., • Attend “Kick-off”, internal & client meetings, and site visits/field measures to capture requirements, constraints, and opportunities., • Track tasks, milestones, and design hours; keeping shared trackers up to date., • Develop block/space plans and iterate to gain client approvals., • Create polished design visuals: 2D drawings and 3D renderings to help teams & clients understand the proposed solution., • Lead and assist finish selection collaboration with Product Application & Design; prepare finish sheets/boards that communicate intent., • Produce working/installation drawings that are precise, coordinated, and orderable., • Validate compliance by checking plans against construction, electrical engineering, and A&D drawings; confirm ADA/egress clearances and applicable code considerations., • Own Electrical/Data layouts for furniture systems with recommended locations and types., • Generate product specifications (e.g., CAP/CET/etc.) which are tagged correctly and audited for accuracy, so procurement and installation teams have exactly what they need., • Create packages for stakeholders that include client-ready documentation with organized deliverables for clarity (file structure, naming conventions, versions)., • Manage revisions with discipline by maintaining drawing files, change logs, and spec updates; communicate impacts on schedule/budget and keep the team aligned., • Participate in mock-ups and punch walks conducted in the field for verification and punch-list reviews with Field PMs/PMs; translate site findings into updates that protect design intent., • Document lessons learned and share improvements with Creative Services peers., • Stay current with product updates, discontinuations, technology, and trends; nurture vendor relationships and visit showrooms as needed., • Elevate team craft by contributing standards, tips, and best practices examples; present learnings at Design team meetings. Requirements: • Expertise in contract furniture, including order preparation, project management, and seamless delivery/installation processes., • In-depth understanding of interior design principles, space planning, and technical drawings., • Strong awareness of workplace trends such as wellness, technology integration, and collaboration strategies., • Proven ability to manage multiple projects simultaneously, ensuring timely and high-quality deliverables., • Degree in Interior Design, Architecture, or a related field preferred., • Outstanding interpersonal and communication skills, enabling effective interaction with diverse stakeholders., • Exceptional organizational abilities and attention to detail., • Commitment to professionalism, integrity, and sound judgment in business transactions., • A passion for exceeding client expectations and delivering transformative workplace experiences., • Proficiency in computer-aided drafting (CAD) and related 3D design software., • Preferred expertise in industry-standard tools such as CET, CAP, SketchUp, and Revit. CRI’s Values: • Be a Good Human – Be kind, be respectful, be positive. Have fun and always do the right thing., • Be the Best Teammate – Roll up your sleeves, share the wins and problem solve collaboratively., • Be Inquisitive – Find the why, value learning. Each day is an opportunity to be better., • Be a Design Thinker – From strategy to operations, question, ideate and solve with empathy., • Lead by example. – Go above and beyond. Expect the best of yourself and each other every day., • Be yourself. – Live our values with your personality. We want you to be you!

Job DescriptionAbout Humble RoboticsWorking at Humble Robotics means taking on the biggest change in ground transportation in decades. We’re building an autonomous, zero-emissions hauler that dramatically lowers the cost of freight with groundbreaking vision-based AI, designed for today’s global logistics network. We’re a fast-moving, close-knit team of AV industry veterans and innovative thinkers. We don’t believe culture can be engineered – but when it falls into place, it’s a once-in-a-lifetime adventure. Progress has never felt so present.Position OverviewOwn the design of new electronic hardware for autonomous automotive platforms end-to-end—from concept and architecture through schematic, layout, fabrication, and release to manufacturing. Key Responsibilities • Bring up new and existing PCBs: power-on, basic validation, programming, and root-causing board-level issues., • Integrate sensors, compute, and actuators on the bench and final platform; exercise UART, SPI, I²C, USB, CAN, etc., • Scout, buy, and stand up EVKs/dev kits; build simple test setups and report data to inform hardware choices., • Use Altium for schematic capture, small design changes, simple board spins (breakouts/adapters), and layout review., • Plan and run lab tests with oscilloscope, logic analyzer, supplies, and loads; document bring-up steps, test results, and known issues., • Work closely with Mechanical, Firmware and Systems engineers to debug system-level issues that trace back to electronics.Minimum Qualifications, • BS in Electrical Engineering, Computer Engineering, or related field; 0–5 years relevant experience (including projects/internships)., • Hands-on experience bringing up custom PCBs or complex dev boards., • Proficiency with Altium Designer (schematic, basic layout or review, and outputs: BOM, Gerbers, assembly files)., • Working knowledge of common peripherals and components: microcontrollers/SoCs, power regulators, basic analog, level shifting., • Practical experience with UART, SPI, I²C, and at least one of USB or CAN., • Comfortable with lab equipment (scope, logic analyzer, DMM, supplies) and reading datasheets/app notes.Preferred Qualifications, • Experience integrating sensors and compute for robotics or autonomy (e.g., cameras, radar, lidar, IMUs, GNSS)., • Basic embedded firmware skills (C/C++) for board bring-up and hardware testingCompensation Salary ranges are determined by role, level, and location. Within the range, individual pay is determined by additional factors, including qualifications, skills, experience, and location. We also offer competitive equity compensation and benefits. As part of the interview process, we may use Artificial Intelligence (AI) tools to compare your qualifications and experience to the job description. A human reviews all AI output and makes a final hiring decision. Humble Robotics does not rely on the output to make any employment decisions. Some applicants may have a legal right to opt-out of the use of AI as part of our interview process. Contact legal@humblerobotics.ai to exercise this right or if you have further questions on the use of AI tools in our hiring process. Humble Robotics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Humble Robotics will consider qualified applicants with arrest and conviction records in a manner consistent with local ordinances. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: About GRID Alternatives GRID Alternatives is a national leader in making clean, affordable solar power and solar jobs accessible to low-income communities and communities of color. GRID is an entrepreneurial, high-growth non-profit organization that provides direct solar installation and project development; clean mobility options; workforce training and service-learning opportunities; and low-income solar policy advocacy. Our Vision: a rapid, equitable transition to a world powered by renewable energy that benefits everyone. Our Mission: to build community-powered solutions to advance economic and environmental justice through renewable energy. What it's like to work at GRID… At GRID, we care about each other and know that each employee has a whole self that includes life outside of work. Our culture supports learning, growth and well-being of all of our team members. Summary of the role: The Commercial Desing Engineer is an individual contributor role within GRID Alternatives’ commercial build team, collaborating with the Director of Commercial Build and Engineering. This position plays an important role in delivering high-quality, code-compliant designs for multifamily and light commercial projects, with most systems in the 50 kW–500 kW range. Rooftop solar is the core scope of this role, with additional opportunities to work on carport solar, battery-enabled micro-grids, and EVSE infrastructure as GRID continues to diversify and expand its commercial portfolio. In this role, you’ll collaborate closely with other designers, construction coordinators, field supervisors, and development teams to support build development and project execution. You’ll contribute technical expertise throughout the project lifecycle while also helping improve design standards, tools, and processes as the program grows. This role is ideal for an experienced commercial solar designer who enjoys solving complex technical problems, working collaboratively across teams, and contributing to a thoughtful, purposeful organization. What you will be doing (essential responsibilities): • Remote within the U.S, preferably west coast, • Produce complete design packages for utility and AHJ submittals for commercial solar and solar-plus-storage projects, generally ranging from 50 kW to 500 kW, • Develop CAD layouts, electrical diagrams, stringing plans, calculations, elevations, details, and bills of materials based on project requirements, • Serve as a technical resource within the commercial design team, assisting with design questions, code interpretation, and troubleshooting, • Perform quality assurance reviews of colleagues’ work to ensure accuracy, constructability, and code compliance, • Clearly communicate design intent, assumptions, and constraints to internal teams and external partners, including project managers, construction teams, utilities, and AHJs, • Provide technical guidance to junior designers through reviews, feedback, and informal training, • Contribute ideas and feedback on design standards, templates, tools, and workflows in partnership with the Commercial Director of Design and Engineering and peers, • Coordinate with external engineering vendors as needed to support project deliveryRequirements: Your areas of knowledge and expertise... • 3+ years of experience designing grid-tied commercial and/or multifamily solar projects, including solar-plus-storage, • Deep understanding of commercial PV system design, component selection, and production modeling, • Strong proficiency in AutoCAD and Excel, with experience using tools such as Helioscope, Aurora, PV Watts, NREL SAM, PVsyst, or similar, • Experience producing utility- and AHJ-ready plan sets, including calculations, details, and as-built documentation, • Ability to clearly explain technical concepts and design decisions to a range of audiences, • A collaborative working style that values shared problem-solving, consensus-building, and alignment across fields, • Strong attention to detail and a quality-focused mentality, • Ability to exercise sound technical judgment while working within established standards, processes, and decision frameworks, • Curiosity and interest in improving tools, templates, and workflows, • Openness to feedback from peers, construction teams, and managers, • Interest in supporting junior designers as part of a collaborative team Benefits and how we take care of you Compensation: The compensation range for this fulltime position is xxxxx. The base pay that will actually be offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Benefits: Medical, Dental, Vision/Eye Care insurance, 5 weeks paid time off (PTO),13 paid holidays, Commuter Checks, 403b Retirement Plan, Employee Assistance Program (EAP), Flexible Spending Account (FSA), Health Savings Account (HSA), STD, LTD, and AD&D insurance Where you will sit & the places you may go… The ideal candidate will sit in xxxxx. This position may require up to 25% out-of-town travel to regional offices and special projects such as org-wide celebrations, team building exercises, etc. Availability to work nights and weekends may very rarely be required. GRID Alternatives may provide vehicles for work travel and/or travel reimbursement for personal vehicle use. In this instance, applicants must hold a valid driver’s license and have a good driving record. Important to note for California applicants: **Hired CA candidates must be able to pass a screening for drugs that are illegal in the state of California, including: amphetamine, cocaine metabolite, opiates, and PCP. Reasonable Accommodation for Job Seekers with a Disability: If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to: RECRUITING@GRIDALTERNATIVES.ORG Ready to Apply? Submit a resume describing your interest. Due to the high volume of inquiries, mailed and emailed applications are not accepted. GRID Alternatives provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability or genetics. Because we value EID at GRID Alternatives, we encourage folks from all backgrounds to apply, even if you do not meet all of the preferred qualifications. Every member of GRID Alternatives must be dedicated to participating in the organization's equity, inclusion, and diversity (EID) work.

Job DescriptionRETHINK MANUFACTURING The only way to ignite change is to build the best team. At Bright Machines®, we’re innovators and experts in our craft who have joined together to create a new category of manufacturing that will help transform the industry. We believe software and data are the answer, thoughtfully applied to solve our customers’ unique challenges. Through intelligent automation, we give factories newfound flexibility, scalability, and resilience. We deliver products to meet the demands of today while building a platform to take advantage of what comes next. Working with us means you’ll have the opportunity to make lasting, impactful changes for our company and our customers. If you’re ready to apply your exceptional skills to create the factory of the future, we’d love to speak with you. ABOUT THE ROLE Mechanical Engineers at Bright Machines sit at the intersection of hardware, software, and advanced automation—building the physical systems that power our intelligent factories. They design with intent and build with urgency, owning everything from precision components to complex subsystems that integrate seamlessly into our robotics platforms. The work is hands-on and deeply collaborative, partnering with electrical, software, and manufacturing teams to take ideas from concept to production-ready systems. At Bright Machines, mechanical engineers don’t just create parts—they solve real manufacturing challenges. They think in systems, move quickly, and iterate in the real world, where performance, reliability, and scalability matter. This is a role for engineers who want to see their work come to life on the factory floor and play a direct part in redefining how modern manufacturing gets done. WHAT YOU WILL BE DOING Innovative Design: Create components and complete products from scratch Detailed Documentation: Produce detailed drawings and maintain comprehensive product dossiers to allow fast and efficient turnaround from design to deployment System Integration: Lead mechanical system integration efforts and conduct rigorous testing to guarantee intended functionality Proof of Concept (PoC): Drive the PoC process from concept to design to implementation, showcasing your creativity and problem-solving abilities Performance Evaluation: Assess the final product's performance, reliability, and safety to ensure it meets our stringent quality standards Collaboration: Lead and collaborate with your team and subcontractors to maximize project success WHAT YOU WILL BRING BS in Mechanical Engineering (or demonstrated equivalency) A minimum of 5 years of experience as a mechanical designer, with a proven track record of success Experience in designing precision mechanisms for robotics and/or automation Proficiency in SolidWorks and PDM with at least 2 years of experience Hands-on experience in assembling complex mechanical systems Exceptional technical and problem-solving skills to tackle complex engineering challenges Strong communication skills to effectively communicate and collaborate within our global team Examples of personal or professional projects showing your problem-solving approach You - happy and fearless, surrounded by robots, controllers, mountains of test parts, and fixtures that you have built yourself IT WOULD BE GREAT IF YOU HAD Several years industry experience working with robotic or automation systems Experience programming robots Design team experience (for example: Formula SAE, robotics clubs, etc.) PLC or other controls experience BE EMPOWERED TO CHANGE AN INDUSTRY Bright Machines is a next-generation, AI-enabled manufacturer focused on data center infrastructure assembly operations. Bright Machines uses its proprietary AI-based robotics and software to assemble AI infrastructure hardware products (i.e., data center servers) for hyperscalers and leading Original Equipment Manufacturers (OEMs). With its new AI factory, Bright Machines addresses increasing market demands for computing power due to the surge of AI and the U.S. national mandate to reshore manufacturing by building data center infrastructure at scale with higher quality and shorter time-to-market. Bright Machines is headquartered in San Francisco, California, with an integration center in Guadalajara, Mexico. The company has been recognized as one of Forbes’ AI 50, awarded “Best AI-based Solution for Manufacturing” by AI Breakthrough, named a “Technology Pioneer” by the World Economic Forum, and highlighted by several other leading technology and innovation organizations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Electrical Designer - Mission Critical The Electrical Designer builds upon foundational experience to deepen technical capabilities and take greater ownership of assigned design work. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary Operating with increasing autonomy, this role is focused on the development of electrical design documentation, performing electrical calculations, and coordination across disciplines. The Electrical Designer contributes meaningfully to project execution and supports innovation through curiosity and collaboration within the team. This individual is engaged in developing a deeper understanding of electrical building systems and design tools and begins taking responsibility for portions of electrical design packages with guidance from project engineers. Essential Functions: • Produce the sheet list for projects, determine project sheet requirements and complete the project set up in Revit., • Participate in the completion of the BIM Project Execution Plan., • Participate in construction administration activities such as submittal reviews and develop RFI responses with supervision from lead engineer., • Collaborate with the project engineers on the required system components—such as panelboards, transformers, lighting control systems— coordinate with all impacted disciplines., • Primarily working in Revit, modeling electrical components and systems based on code and client requirements, as well as engineering guidance, • Produce redline markups for electrical drawings to delegate tasks to other team members., • Participate in mentorship relationships with all levels of engineers to understand and teach the “how” and “why” of engineering for the built environment., • Edit specifications, primarily Division 26, for project requirements alongside the project engineers., • Complete system sizing and energy code compliance calculations alongside the project engineers, including lighting power density, voltage drop, and fault current calculations., • Develop familiarity with code compliance and engineering best practices., • Check your work for graphical and technical issues to resolve prior to deliverable issuance., • Collaborate in the QAQC effort per HED’s Design Process, • Attend client and project team meetings alongside the project lead to review and coordinate project requirements., • Participate in coordination meetings and lead follow-up efforts to resolve action items., • Work with sub-contracted firm(s) to delegate workload, • Work in different sectors to gain experience as a generalist, • Engage in DWP process and estimate hours required to complete project tasks, • Manage assigned project hours for self-performed and delegated work. Requirements • Bachelor's degree in directly related field or equivalent experience required., • 2+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description ICT Designer - Mission Critical HED is looking to add a talented person to our ICT team. The ICT Designer builds on foundational design knowledge to contribute to the execution of complex mission critical technology infrastructure projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role emphasizes developing expertise in systems such as structured cabling and security while deepening coordination capabilities and technical acumen. Essential Functions: • Model ICT system components in Revit including pathways, outlets, equipment, and devices based on code, client requirements, and engineering guidance. Assist in developing project documentation including floor plans, riser diagrams, and device schedules. • Perform basic calculations for conduit fill, cabling distances, and equipment loads with limited oversight., • Collaborate with project engineers and architects to coordinate technology system layouts with building design., • Contribute to redline markups and assist in delegating documentation tasks., • Participate in QA/QC reviews and resolve technical or graphical issues in documentation., • Review and edit specifications under the guidance of project engineers., • Attend project meetings and site visits to support coordination and client interaction, • Manage assigned project hours and report progress to team leads., • Engage in HED’s Design Work Planning (DWP) process and estimate time required for task completion.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2+ years of experience in technology infrastructure design or a related AEC discipline is required., • RCDD certification is greatly preferred., • Proficient in Revit; experience with AutoCAD, Bluebeam, and Microsoft Office., • Familiarity with standards such as BICSI, EIA/TIA, and NEC., • Strong organizational and communication skills., • Self-motivated with a collaborative mindset and enthusiasm for innovation.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities.Work Environment We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture. The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description PIVOT INTERIORS Our organization includes a strategic team of big thinkers and creatives who truly work interdependently. Whether planning our Customer Experience program, developing multi-pronged marketing strategies, or designing projects for our innovative clients, we are constantly finding ways to underscore our promise to partner with our clients to make inspiring spaces that unlock their people’s greatest potential. The pace is fast, the learning is constant…but as part of a team this driven, the possibilities are endless. Your Role at Pivot As a Senior Designer, you will be responsible for applying Pivot’s creative expertise and design services to support new and existing clients. You will work alongside a team of dynamic, creative workplace designers, practicing high standards for design, providing a high level of customer satisfaction, and serving as a collaborative member of a dynamic project team including sales, project management, and procurement support. In addition to leading project design, you will partner closely with sales executives to support new business development efforts – participating in pitch strategies, co-creating presentation materials, and joining client meetings to help win new opportunities. You will engage customers and industry influencers in forward-thinking discussions and workshops to solve strategic challenges within their organizations and use your creativity, skills, and expertise to influence, persuade and shape others’ perceptions and beliefs about design and how physical space can improve people’s lives. In Addition, You Will • Assume responsibility for the overall completion of projects of all complexities including programming, strategic planning, conceptual designs, space planning, presentations, design development, and production; delegate and oversee fulfillment of design deliverables as required., • Drive project solutions and customer experience to new levels both in terms of engagement and business development, but also in terms of innovative, tailored solutions., • Partner with sales executives in early-stage client engagement efforts by providing creative direction, design input for proposals and RFP responses, and representing design strategy in sales presentations and discovery meetings., • Incorporate and execute creative design strategies., • Establish and manage design project budgets, project scope, and contracts, and coordinate deliverables with internal and outsourced design resources., • Navigate customer and industry partner interactions with ease, clearly articulating design ideas and rationale for decisions and outcomes., • Proactively identify project risks, offering creative solutions and alternatives; work independently to execute next steps, and evaluates results., • Participate in ongoing learning around strategic areas of focus, including partner products and solutions, sustainable design, design tools and technology, and workplace strategy., • Proactively champion designs operational excellence by implementing established design processes and documentation standards; manage and record billable hours, cultivate efficiencies, and reduce errors., • Demonstrate excellent time management skills and flexibility; effectively and confidently address competing priorities and urgent situations, making sound decisions in short timeframes with appropriate action., • Mentor and train design team members., • Perform other duties or special projects as assigned., • Demonstrate our Pivot values of Respect, Integrity, Teamwork, Initiative, Curiosity, and Accountability in all aspects of work. We’re Excited About You If You Have • 5+ years of professional experience and a bachelor’s degree in architecture or interior Design from an accredited 4-year university; or equivalent combination of education and industry experience including a proven track record of leading projects., • Must be a certified Interior Designer or working toward certification, or equivalent., • Active membership in a professional organization., • Experience creating and developing overall design concepts and formulating design presentation strategies with an understanding of design history and trends., • High proficiency in navigating and curating solutions from an expansive product portfolio, including furniture systems, ancillary, accessories, and bespoke., • Proficiency in building systems, building codes, electrical, and cabling., • Excellent analytical and problem-solving skills., • Outstanding graphic presentation skills., • Strong mentoring skills and ability to lead, train, and direct the work of others., • Proven track record of success in maintaining and growing client relationships, and a sense of business acumen to advise and guide clients as required., • Strong, persuasive communicator with excellent verbal presentation skills and the ability to communicate complex design concepts to clients., • Highly proficient and demonstrated ability to use 2D/3D software, CET Designer, AutoCAD, Sketch Up, and Adobe Creative Suite (Photoshop, In Design, and Illustrator). Revit is a plus., • Knowledge of the total project process including fee and project team management, schedules, and budgets. SUPERVISORY RESPONSIBILITIES This job has no direct supervisory responsibilities, but the position may require supervision of junior design staff members and contractors as project requirements dictate. CERTIFICATES, LICENSES, REGISTRATIONS, IMMUNIZATION RECORDS None. LANGUAGE SKILLS Ability to respond to complex inquiries or complaints from customers or members of the business community. Ability to effectively present information to top management in client organizations, public groups and other outside entities. REASONING ABILITY Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to stand. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT The physical environment is consistent with most professional service organizations. The noise level in the work environment is usually quiet. *Equal Opportunity Employer–minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity.

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

Qualifications Minimum: Bachelor's degree in Engineering from an accredited curriculum in the US or the equivalent from outside the US 3 years of cumulative experience in engineering and design Desired: Electrical transmission line engineering for 115kv-500kv Strong familiarity with GO 9

Qualifications Minimum: - Bachelor’s degree in Engineering from an accredited curriculum in the US or the equivalent from outside the US - 3 years of cumulative experience in engineering and design Desired: - Electrical transmission line engineering for 115kv-500kv - Strong familiarity with GO

Company Overview At Motorola Solutions, we believe that everything starts with our people.We’re a global close-knit community, united by the relentless pursuit to help keep people safer everywhere.We build and connect technologies to help protect people, property and places.Our solutions foster th

QR's reputation for product data management and consultancy has put us at the vanguard of transforming the automotive, aerospace and robotics industries across the globe, as they seek to build better products and a more sustainable future.As a team, we are excited to be supporting the development of

Are you looking to make an impactful difference in your work, yourself, and your community? Why settle for just a job when you can land a career? At ICW Group, we are hiring team members who are ready to use their skills, curiosity, and drive to be part of our journey as we strive to transform the i

Bachelor of Science in Electrical Engineering/Bachelor of Science in Computer Science or equivalent experience.

Job Title: Physical security Project Manager.Highly organized and detail-oriented individual responsible for overseeing the planning, implementation, and tracking of multiple simultaneous projects from inception to completion for Corporate Security technology projects.This may include software appli

We are seeking a Mechanical Systems Design Engineer to design, build, test, and deliver mechanical systems that perform reliably in real-world conditions.This role involves full lifecycle ownership of hardware, from early prototypes through production-ready systems.The engineer will collaborate with

Topa Group is partnered with a premier fire life safety company.We are seeking a Fire Sprinkler Project Manager who will oversee and manage fire sprinkler projects from inception to completion.This person will coordinate technicians, serve as client liaison, ensure code compliance, and deliver proje

Are you looking for an exciting new challenge in Project Management?.MIGSO-PCUBED is looking for an experienced and passionate Project Management Consultant with biotechnology industry experience to join our team and support our engagements.This position is onsite and requires you to commute through

We are seeking an experienced Senior Project Manager to lead large-scale mechanical construction projects from preconstruction through closeout.This role is ideal for a proven leader who thrives in a fast-paced environment, excels at managing complex projects, and is passionate about delivering high

Current experience working with corporate tenants, ownership groups, designers, and brokers, with a strong emphasis on communication and client relationship management.

Are you ready to become an expert in Project Management? This is the role for you!.MIGSO-PCUBED is looking for a passionate and communicative IT Project Management Consultant to join our team and support our engagements in San Francisco.This position is onsite and will require you to commute to our

Do you enjoy managing projects? Are you the go-to person everyone counts on to juggle multiple projects and deadlines? If this sounds like you, read on!.Project Management Team in the Bay Area to be responsible managing all aspects of a project to final close out including the responsibilities encom

Assistant Project Manager, Real Estate Development.Orange County, CA | Full-Time | On-Site (Initial).A rapidly growing real estate development firm is seeking an Assistant Project Manager to support the execution of large-scale multifamily and affordable housing projects across Southern California.T

Assistant Project Manager – Public Works / K-12 Construction.Our client is seeking an Assistant Project Manager to join their Bay Area-based team specializing in public works and K-12 school construction.This role is ideal for a detail-oriented, proactive leader who can manage multiple projects, m

BackOps is building AI-native automation for supply chain and back-office operations at the world's largest enterprises.Our products — Relay (exception detection and resolution) and the AI Process Center (workflow knowledge capture and automation) — replace manual firefighting and tribal knowled

Epiq Counsel is partnering with a global, market-leading medical technology organization to identify a senior-level CLM Implementation Project Manager to support a high-impact enterprise initiative.This 40-hour per week role will play a central part in a large-scale contract lifecycle management (CL

EXECUTIVE BUSINESS PARTNER | SF.High-trust executive partnership supporting a senior leader in a fast-moving environment.

ONSITE IN SAN FRANCISCO OR SAN RAMON 3 DAYS A WEEK!.Technical Project Manager – Cloud Operations, Observability & Disaster Recovery.We are seeking an experienced Technical Project Manager to lead and coordinate enterprise technology initiatives across Cloud Operations, AIOps, Monitoring &

Job Title: Electric Transmission Project Manager.Senior Project Manager position that requires mastery of the journey level Project Manager job duties.Under general direction, exercises judgment and discretion and is responsible for all aspects of the development and implementation of assigned proje

Construction Project Manager – Water/Wastewater.LOA (for travel roles) + comprehensive benefits.Multiple office locations across CA, CO, and ID.Construction Project Managers (PMs and Sr.These roles are available in two primary formats:.Supporting regional and local projects out of one of our estab