Electrical designer jobs in Aurora, ColoradoCreate job alerts

Senior Electronics Engineer Denver, CO Our exciting Space client in the Denver area are looking for a Senior Electrical Engineer with a strong background across Digital and Mixed-Signal Electronics Design In this role you will work across the full concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. JOB DUTIES AND RESPONSIBILITIES: • Own end-to-end design of electronics modules, from concept and architecture through schematic, layout, test, and production, • Design mixed-signal electronics & own the digital and mixed-signal portions of complex RF electronics., • Design circuits with FPGAs, processors, microcontrollers, and other complex programmable targets, • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives, • Perform detailed PCB layout in Altium Designer for complex boards, sometimes working with a PCB Designer, • Complete analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, • Develop bring-up plans and design verification plans for new electronics modules, • Perform bring-up and key verification testing of modules, often working with a technician to complete validation, • Release modules to production, working with the Manufacturing and Test Engineering teams, • Mentor junior engineers to build technical understanding and professional development JOB REQUIREMENTS: • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Ideally 6+ years of industry or university research experience in board-level electronics design, analysis, and test., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Experience owning the design phase of circuits or boards, including trade studies, key part selection, and detailed design., • Experience delivering subcircuit or board designs to production and deployment., • Experience performing complex PCB layout, such as high-density interconnect (HDI) and high-speed digital or power electronics., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Proficiency in electronics design tools such as Altium., • Strong lab experience for bring-up and verification of new hardware. If you are interested then please apply today.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Associate Distribution Engineers in the Denver, CO area who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! This position is hybrid in nature, where 3 days/week are spent working in our office, collaborating with internal teams, and 2 days/week can be spent working remotely. As an Associate Distribution Engineer, You can expect to: • Perform design engineering support for electric utility projects under guidance from senior engineers, • Assist in developing work packages for OH, UG, URD, Make Ready, and Street Light projects using customer GIS and WMS systems (e.g., DDS, GDT, GE Smallworld, Bentley Expert Designer, Maximo), • Support tracking of assigned tasks to help meet project schedules and client expectations, • Assist with routine planning activities and customer follow-up as needed, • Review assigned work for completeness and escalate issues or conflicts to senior team members, • Contribute to process improvements by identifying opportunities to increase efficiency and quality, • Gain familiarity with utility coordination, permitting requirements, easements, and ROW documentation, • Participate in both office and occasional field activities to collect data and support project development; must have a valid U.S. driver’s license for local travel as needed, • Work out of the Denver area office on a hybrid schedule What Sets You Apart (Background Requirements): • Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree., • Ability to demonstrate proficiency with the NESC., • Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates)., • Ability to demonstrate strong written, verbal and interpersonal communications skills Preferred Qualifications: • EIT Certification, • Providing estimated costs, development of a BOM, calculating the CIAC, • Design tools such as Pole Foreman, SOCKET, Spida-Calc, DDS, • MicroStation -performing Electrical Distribution design, • Work management software and job estimating software, • CAD tools At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $50,700.00 - $91,650.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers in the Denver, CO area who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! This position is hybrid in nature, where 3 days/week are spent working in our office, collaborating with internal teams, and 2 days/week can be spent working remotely. As a Distribution Engineer, You can expect to: * Perform design engineering for Leidos electric utility customers * Develop work packages for OH, UG, URD, Make Ready, and Street Light projects, using customer GIS and WMS systems such as DDS, GDT, GE Smallworld, Bentley Expert Designer, and Maximo * Manage scope, schedule, and budget of work assigned. * Perform functional tasks, planning, and/or customer follow-up * Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities * Initiate continuous improvement to workflow processes that drive efficiency and high-quality standards in client design deliverables * Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications * Be comfortable in both a field and office setting: the role may require local or regional customer-site visits to collect field data that will assist in developing work packages; Candidates should possess a valid US driver's license in order to be available for in-person meetings and assignments in the area on an as-needed basis. * Work out of our Denver area office on a hybrid schedule. What Sets You Apart (Background Requirements): * 2+ years of prior relevant experience is required. * Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree * Experience and demonstrated proficiency with the National Electric Safety Code (NESC) * Some Prior experience with structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations. * Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates). * Ability to demonstrate strong written, verbal and interpersonal communications skills Preferred Qualifications: * EIT Certification * Providing estimated costs, development of a BOM, calculating the CIAC. * Design tools such as Pole Foreman, SOCKET, Spida-Calc, DDS. * MicroStation -performing Electrical Distribution design. * Work management software and job estimating software. * CAD tools At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Associate Distribution Engineers in the Denver, CO area who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! This position is hybrid in nature, where 3 days/week are spent working in our office, collaborating with internal teams, and 2 days/week can be spent working remotely. As an Associate Distribution Engineer, You can expect to: • Perform design engineering support for electric utility projects under guidance from senior engineers, • Assist in developing work packages for OH, UG, URD, Make Ready, and Street Light projects using customer GIS and WMS systems (e.g., DDS, GDT, GE Smallworld, Bentley Expert Designer, Maximo), • Support tracking of assigned tasks to help meet project schedules and client expectations, • Assist with routine planning activities and customer follow-up as needed, • Review assigned work for completeness and escalate issues or conflicts to senior team members, • Contribute to process improvements by identifying opportunities to increase efficiency and quality, • Gain familiarity with utility coordination, permitting requirements, easements, and ROW documentation, • Participate in both office and occasional field activities to collect data and support project development; must have a valid U.S. driver’s license for local travel as needed, • Work out of the Denver area office on a hybrid schedule What Sets You Apart (Background Requirements): • Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree., • Ability to demonstrate proficiency with the NESC., • Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates)., • Ability to demonstrate strong written, verbal and interpersonal communications skills Preferred Qualifications: • EIT Certification, • Providing estimated costs, development of a BOM, calculating the CIAC, • Design tools such as Pole Foreman, SOCKET, Spida-Calc, DDS, • MicroStation -performing Electrical Distribution design, • Work management software and job estimating software, • CAD tools At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $50,700.00 - $91,650.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description Leidos is seeking Distribution Designers to work in Denver, CO. The contract opportunity is to work with our team on the MYR Master Design Build contract. In this mission we are tasked with providing distribution design engineering for overhead and underground feeders across the client's distribution footprint. The successful Distribution Designer candidate will have an interest in developing construction work packages for the electric distribution system using various software systems and construction standards. Distribution systems may be in an OH, UG, or URD environment. Project work may include joint use make ready, and street light projects. Work packages will be developed using Geographic Information Systems (GIS), Computer Aided Design (CAD) tools, Work Management Systems (WMS), and other client systems. This position requires the successful candidate to work for a contractor in a temp-to-perm format with the possibility of converting to a direct Leidos employee in approximately 6 months from the initial hire date. Project work will require performing engineering calculations that may include: structural analysis of poles, guying, cable pulling, electric demand, fault currents, and coordination of protective devices. Assignments may also include: preparing forestry trimming requests, facilitating permit and Right-of-Way acquisition, development of a BOM, estimating costs, and customer advocacy such as acquiring easements or calculating a customer Contribution in Aid of Construction (CIAC). Distribution DesignerResponsibilities: Duties may include work package development of overhead, underground residential distribution, and underground cable/conduit, field visits or field engineering of project requirements, identification of conflicting utilities, engineering and design calculations, and post-construction reviews. Distribution Designer Required Education & Experience: * 2-year technical degree or H.S. Diplomaw with less than 2 years of relevant experience. Preferred Qualifications * Experience with STORMS, Katapult, ESRI, AutoCAD, PDS, and Geographic Information Systems (GIS) is a plus * Familiarity with Pole Loading software (DDS, O-Calc, SPIDA Calc, Pole Foreman, LD Field) * Proven ability to communicate with clients and project teams * Excellent verbal and written communication skills * Experience with projects in 3rd party make-ready design with electric utility distribution design being a plus. * Experience with development of civil & electrical packages associated with proposed work for each 3rd party carrier. * Ability to read and seek information through various client supplied documents/standards. * Familiarity with Microsoft Office programs. * Strong understanding of mathematics. No two career paths will ever look the same. At___we know the most talented and diverse engineering professionals will always have a multitude of career choices; your time at Leidos will be a wise investment in your career and in yourself. Protect yourself and your family with the___of working for a world-class employer.___you join a Fortune 500 company and one of Ethisphere Institute's "World's Most Ethical Companies." Successful Distribution Designer candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth. In this role, you can also expect to gain experience / expertise in: * NESC * Structural Pole Modeling * Electrical Power Calculations * DDS design * Project management Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don't wear capes (they're a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for "how it's always been done." December 31, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $35,100.00 - $63,450.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role supports the development and operations of New Glenn, a single-configuration, heavy-lift orbital launch vehicle capable of routinely carrying people and payloads to low-Earth orbit, geostationary transfer orbit, cislunar, and beyond. Its first stage is fully reusable, and the vehicle was designed from the beginning to be human-capable. As part of a small, hardworking and accomplished team of engineers, you will be in charge of engineering, designing, and installing of electrical harnesses for various spaceflight systems. This is a hands-on position that will involve you in all aspects of engineering, design, fabrication, installation and test. • Design of electrical harnesses for power distribution, RF, communication and high-speed data signal, • Selection of harness components and hardware, connectors, backshells, cable and wire, • Understanding and application of EMI/RFI and harness shielding, • Build 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD), • Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets, • Design and integration of harness support brackets, • Support design configuration development and trade studies, • Provide technical guidance for hardware installation, • Support the assembly and testing of cables and harnesses, • Maintain and report on activity schedule and technical status, • Find opportunities for improvements and operational cost and schedule savings We are looking for someone to apply their technical expertise, leadership skills, and dedication to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! • B.S. degree or higher in Mechanical or an appropriate engineering field, • 7+ years of experience designing Wire Harnesses for the Aerospace industry, • Experience with Creo and Windchill and Routed System Designer (RSD), • Understanding and application of wire derating analysis, • Familiar with existing applicable harness standards: IPC/WHMA-A-620A, NASA-STD-8739.4, • Strong electrical/mechanical design and integration skills using 3-D CAD software, • Experience with Pro/E Piping, • Experience with other high-end CAD routing software such as Unigraphics NX Electrical and Mechanical Routing, • Knowledge of harness fabrication and installation processes, • Experience with launch vehicle or spacecraft electrical/mechanical systems Compensation Range for: CO applicants is $119,814.00 - $167,738.55 WA applicants is $130,706.00 - $182,987.70 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Associate Distribution Engineers in the Denver, CO area who are passionate about electric utility design engineering. We're looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! This position is hybrid in nature, where 3 days/week are spent working in our office, collaborating with internal teams, and 2 days/week can be spent working remotely. As an Associate Distribution Engineer, You can expect to: • Perform design engineering support for electric utility projects under guidance from senior engineers, • Assist in developing work packages for OH, UG, URD, Make Ready, and Street Light projects using customer GIS and WMS systems (e.g., DDS, GDT, GE Smallworld, Bentley Expert Designer, Maximo), • Support tracking of assigned tasks to help meet project schedules and client expectations, • Assist with routine planning activities and customer follow-up as needed, • Review assigned work for completeness and escalate issues or conflicts to senior team members, • Contribute to process improvements by identifying opportunities to increase efficiency and quality, • Gain familiarity with utility coordination, permitting requirements, easements, and ROW documentation, • Participate in both office and occasional field activities to collect data and support project development; must have a valid U.S. driver's license for local travel as needed, • Work out of the Denver area office on a hybrid schedule What Sets You Apart (Background Requirements): • Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree., • Ability to demonstrate proficiency with the NESC., • Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates)., • Ability to demonstrate strong written, verbal and interpersonal communications skills Preferred Qualifications: • EIT Certification, • Providing estimated costs, development of a BOM, calculating the CIAC, • Design tools such as Pole Foreman, SOCKET, Spida-Calc, DDS, • MicroStation -performing Electrical Distribution design, • Work management software and job estimating software, • CAD tools At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $50,700.00 - $91,650.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Minimum Qualifications: 2-7 years in a CAD drafting/designer role, related to industrial electrical systems Proficient skills in Revit 3D Strong understanding of industrial projects BIM experience, preferably with some introductory knowledge of NavisWorks or BIM 360 Seniority level Associate Employm

Job DescriptionDescription: Oneida Engineering Solutions (OES) was awarded the Outstanding Tribally Owned Business of the Year award in 2023. We are an 8(a), minority business enterprise (MBE) that provides engineering, environmental, science, and specialized professional services solutions for customers nationwide. OES has openings for a Construction Inspector at Buckley AFB, in Aurora, CO, subject to the award of a pending contract. Key Responsibilities: • Inspect construction projects to verify that plans and specifications are followed., • Complete detailed daily reports and photo log., • Work collaboratively with coworkers, staff, construction contractors, and the designer of record to troubleshoot problems that arise during construction., • Coordinate with the designer of record to answer RFIs, evaluate submittals, and prepare modification paperwork with updated drawings and cost estimates., • A bachelor’s degree in engineering, architecture, or construction management., • 5+ years of experience in quality control management of Department of Defense construction projects., • 3+ years of civil and/or construction practices, procedures, and testing., • Completion of the USACE Quality Control Management course within the last five years., • Knowledge of Federal and National Guard Engineering and Acquisition Standards., • Possess a valid Driver’s License., • Possess a valid Secret Clearance or ability to attain before employment start., • The ability to use AutoCAD to complete red-line drawings., • Experience with vertical construction projects involving electrical, mechanical, fire protection, structural, and/or architectural systems., • Experience with projects abating hazardous materials, such as asbestos or lead-based paint, • The ability to review construction submittals. About Us: The Oneida ESC Group is a family of companies owned by the Oneida Nation of Wisconsin that delivers customer-focused engineering, science, and construction services worldwide. • Our family of companies includes:, • Oneida ESC Group (OESC), • Oneida Professional Services (OPS), • Oneida Total Integrated Enterprises (OTIE), • Mission Support Services (MS2), • Sustainment & Restoration Services (SRS), • Oneida Engineering Solutions (OES), • General Mechanical Corporation (GMC), • LG2 Environmental Solutions (LG2) Equal Employment Opportunity: Oneida ESC Group is an equal opportunity employer committed to inclusion and diversity in the workplace. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws, national origin, disability, veteran status, or other legally protected characteristics. Oneida ESC Group participates in the E-Verify program. Learn more about the E-Verify program. Oneida ESC Group is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Oneida ESC Group makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description JOB DESCRIPTION POSITION TITLE: Hardware Designer PAY TYPE: Salaried DEPARTMENT: Engineering & Automation FLSA STATUS: Exempt REPORTS TO: Project Manager or Engineering Lead This role is a key technical contributor within a highly respected systems integration firm that serves a broad range of industries—from biotechnology and pharmaceuticals to metals, mining, and specialty manufacturing. The Hardware Designer plays a critical role in delivering customized automation and control solutions to meet client needs across North America. Hardware Designer Duties & Responsibilities • Draft and develop engineering drawings for control and automation systems in collaboration with the CAD/Design Department., • Execute all tasks related to control panel design, PLC layout, system implementation, and documentation of control and information systems in accordance with client requirements and project timelines., • Interpret engineering concepts and translate them into highly detailed and accurate design documentation., • Support instrumentation design including mechanical installation, interconnection, schematics, power distribution, conduit, and cabling., • Perform hardware testing and assist in building in-house test setups for system development., • Collaborate with project managers and engineers to resolve technical conflicts and ensure project alignment., • Follow internal procedures and standards for consistency, quality, and compliance., • Contribute to the improvement of engineering processes and design standards to enhance quality and productivity., • Assist in estimating future projects and may occasionally travel to customer sites for assessment or support. Qualifications of ideal candidate for the Hardware Designer • BS Engineering, • Proficiency in drafting and electrical design for control systems., • Strong working knowledge of industrial automation and instrumentation practices., • Ability to work effectively in a collaborative, fast-paced project environment., • Excellent verbal and written communication skills., • Experience working under established quality procedures and contributing to process improvements., • Familiarity with control panel fabrication and system testing is highly preferred. We ensure the following Benefits are Offered: • Competitive salary depending on experience, • Comprehensive benefits package, • Medical, dental, and vision insurance, • Generous vacation time/ PTO, • 401(k) with company match, • Opportunity for career or skills growth Must be authorized to work in the United States without sponsorship

Job Description At AE Design, we believe great design starts with great people. Founded in 2004 on a foundation of friendship and shared vision, our firm has grown into a dynamic team dedicated to delivering exceptional design solutions. Our culture is built on collaboration, curiosity, and a commitment to excellence. We foster an environment where knowledge is shared, ideas are valued, and every team member is empowered to contribute to our success. Through proactive communication and meticulous attention to detail, we create seamless experiences for our clients-anticipating needs, solving challenges, and delivering thoughtful, responsible designs. As an integral part of the Denver AEC community, we take pride in supporting industry organizations and local nonprofits that align with our values. Sustainability, innovation, and partnership are at the heart of everything we do, ensuring that our work not only meets today's needs but also contributes to a better future. At AE Design, we don't just complete projects-we build lasting relationships, provide high-touch service, and make our clients' lives easier. Our passion for design and dedication to excellence drive us forward, shaping the spaces and communities we serve. General Role Description As a senior lighting designer, you will provide creative and proactive solutions for our clients and their projects. The position requires strong leadership in training designers, delegating tasks, and driving project technical design strategy from kickoff through completion. This role collaborates with and teaches other designers to ensure we continue to excel at a very high level in design. You will be working on some of our larger and more complex projects and will collaborate closely with project teams and clients to help bring your, and the team's, vision to reality. This position reports to the Lighting Studio Lead and has direct supervisory responsibilities over the Lighting Designer position. Key Responsibilities • Lead execution of design projects from start to finish, ensuring compliance with codes and sound engineering principles, • Function as project lead, coordinating with project managers, architects, engineers, and internal teams to meet deadlines and maintain quality standards, • Strategize and implement a design workflow for the project design team. Manage project schedules, budgets, and resources effectively; adjust timelines and delegate tasks to ensure timely delivery, • Oversee design intent in construction documents, shop drawings, and RFIs; review work for quality assurance and regulatory compliance to ensure consistency with client needs and design objectives, • Apply broad engineering knowledge to design engineered systems and oversee projects through construction and completion, • Serve as secondary client contact: respond promptly to emails, facilitate meetings, resolve complex design issues, and coordinate internal team participation in meetings and calls, on select projects, • Drive consensus in meetings and guide project strategy, task assignments, and internal progress planning, • Lead specification writing, editing, and formatting; leverage internal resources for document preparation, • Conduct frequent check-ins with design teams, review project goals, develop internal project milestone check-ins, follow SOP, and assess progress; intervene when client satisfaction or deadlines are at risk, • Own the completion of all deliverables. Responsible for project deliverables review prior to sending, • Take ownership of design risk management and project completion accuracy; ensure readiness for QA/QC review, • Proactive studio communication with other Studio Seniors, • Actively engage in business development opportunities with current and prospective clients, • Train and coach designers in technical skills, time management, and consulting practices; support foundational learning programs and educational initiatives, • Participate in performance review process for assigned direct reports, • Communicate effectively across all stakeholders-clients, engineers, PMs, and design teams-to ensure clarity and alignment, • Assist Principals and Project Managers with proposal preparation for new project opportunities and active project additional service proposals, • Continuing education with new industry knowledge and products, approaching opportunities with the "Passion" core value standards, • Demonstrate leadership in industry and/or client related organizations, • Lead by example by engaging and participating with internal company initiatives, • Establishing relations with peers at the Client's firm to yield repeat work, • Participates in Client presentations, such as Lunch and Learns, • Work with the Lighting Studio Lead to assist with guiding the future of AE Design as it relates to Lighting Design, • Assist the Lighting Studio Lead with the development of new processes and standards, • A minimum of 2 years working in a senior / lead lighting designer role, with a minimum 5 years of industry experience, • An undergraduate degree in Architectural Engineering, Electrical Engineering or a closely related discipline, • Experience in drafting client-consultant agreements and fee preparation, • Experience with state and local lighting requirements and energy codes, • Experience with AutoCAD, REVIT, Bluebeam, and photometric software, • The ability to communicate effectively with owners, clients, contractors as well as co-consultants, • The ability to excite, engage, and develop younger staff, • The ability to work as a team player on the design teams and within the office structure, • Positive financial management for projects, • An active presence in professional and client-related organizations, • Competitive salary and benefit plan (401k, HSA and more), • An environment which supports continued education, professional development and personal growth with opportunities to learn outside of the office and through our mentorship program, • An open office, enthusiastic and collaborative coworkers, and out of office events ranging from happy hours to ski trips, • A dedication to a true work-life balance, • The chance to work on a variety of projects, and learn about low-voltage, audio/visual, special systems, commissioning and the other services we provide, • The opportunity to get out of the office for site visits, client visits, seminars and networking opportunities, • A condensed 4.5 day work week - we work full time, but we love our half day Fridays!, • A great bonus incentive program, • Opportunity to help grow with a highly reputable company who does beautiful work

Job DescriptionElectrical Engineer – MEP Consulting (Buildings) Industry: Building Systems / MEP Consulting Experience Level: 3–8+ Years Schedule: Full-Time | Flexible Schedule Location: Denver CO Prefer local candidates (limited relocation considered for exceptional talent) The Opportunity We are seeking an Electrical Engineer to join a long-established MEP consulting engineering firm with an outstanding reputation and diverse project portfolio. This role is ideal for an engineer with hands-on experience designing electrical systems for buildings who is looking for a stable, long-term career in consulting engineering. You will support the design of healthcare, education, commercial, and government facilities, working closely with mechanical and plumbing engineers in a fully integrated MEP environment. Key Responsibilities • Design electrical systems for institutional and commercial buildings, including:, • Power distribution, • Lighting systems, • Fire alarm systems, • Low-voltage and building systems, • Develop detailed electrical layouts, one-lines, and electrical room designs, • Perform load calculations, photometric calculations, short-circuit studies, and arc-flash analyses, • Produce and coordinate 3D Revit models and 2D AutoCAD drawings, • Prepare construction documents, specifications, and technical narratives, • Support construction administration, including RFIs, submittals, and field coordination, • Bachelor’s degree in Electrical Engineering or related discipline from an accredited university, • 3+ years of experience in MEP consulting or building systems design, • Demonstrated experience with electrical power, lighting, and fire alarm design for buildings, • Strong Revit experience (minimum 3 years), • Strong AutoCAD experience (minimum 4 years), • Solid understanding of MEP coordination (HVAC & Plumbing exposure required), • Excellent written and verbal communication skills, • Strong attention to detail and ability to manage multiple projects, • Professional, team-oriented mindset with a positive, dependable work ethic Preferred Qualifications • Colorado Professional Engineer (PE) license or Engineer-in-Training (EIT), • Experience with Ajera or similar project management software, • Experience supporting healthcare or institutional projects, • 100% employer-paid medical, dental, and vision coverage for employees, • 401(k), Flexible Spending Plan, and Health/Fitness programs, • Employer-paid short- and long-term disability and life insurance, • Flexible work schedule: 9-hour days Monday–Thursday, half-days Friday, • Generous paid holidays and PTO, • Monthly company activities and employee longevity recognition Who This Role Is For • An Electrical Engineer with true MEP consulting experience, • Someone who values stability, craftsmanship, and professional growth, • A hands-on designer who wants to stay technical while growing in responsibility Who This Role Is Not For, • Engineers without building-systems (MEP) experience, • Candidates with frequent job changes, • Individuals seeking short-term or contract roles

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Mechanical EngineerLocation - Austin, TX \u007C Chicago, IL \u007C Denver, CO (Centennial) \u007C Minneapolis, MN \u007C or Muscatine, IAJob Type – HybridRequisition ID - 11201 Stanley Consultants is looking for a Mechanical Engineer with facility design experience to join one of our offices. The successful candidate must be knowledgeable in mechanical system design for diverse project types. Building mechanical systems including HVAC, plumbing, steam, hydronic heating and cooling, and compressed air, along with a basic understanding of Building Automation Systems (BAS) and ability to write sequence of operations for building systems. Project types include renovations and new construction. Design tasks include general arrangements, piping and ductwork layout, and equipment selections while working with equipment / manufacturer representatives. Work focuses primarily on these services; central heating and cooling plants, campus utility distribution systems, industrial/process facilities, power, and other infrastructure projects. The projects are large and small; local, nationwide, and possible worldwide; and for industrial, higher education, utility, federal, and municipal clients. The senior mechanical engineer role is responsible for determining the technical approach, validating the design criteria, directing more junior staff, and reviewing and / or performing detailed design tasks such as calculations, specifications, and drawing preparation, as needed. This person must coordinate with others on multidiscipline design team and prepare high quality deliverables. This individual will be expected to perform design duties with minimal supervision and have ability to communicate within a team environment. This opportunity offers interaction with a variety of clients in multiple markets, with the possibility of working on international projects. This position is for a candidate with 8-15 years of experience performing functions which require the application of standard mechanical engineering techniques, procedures and criteria in performing a sequence of related engineering tasks. You will work as a design engineer or discipline lead depending on the size and complexity of the project with mentoring opportunities for building project management skills and capabilities on a variety of projects. You must have experience in state or federal building design, university central plants, industrial facilities, mission critical facilities, or related fields. Work is expected to include new building design, existing building retrofits and upgrades (such as HVAC or plumbing systems), industrial/process facilities, and other energy infrastructure projects. The projects will vary in size and location. What You Will Be Doing: • Serves as technical liaison with clients on project efforts and coordinates technical efforts within discipline areas. Participate in mechanical design development from conceptual design through detailed design, this includes coordinating with other team or project members including other disciplines (architectural, structural, electrical, civil, and I&C), • Prepare and check design computations for system design, equipment and pipe sizing, and determining conditions of service, • Project experience as a task lead, project engineer, or project manager is a plus., • Consults with construction personnel concerning design constructability as related to field conditions, sequencing, and scheduling of construction activities., • Is in responsible charge (holds) or attends both client and construction Contractor meetings., • Uses computer assisted engineering and design software and equipment to prepare engineering and design documents. Desirable experience in Revit, AutoCadd, Trane TRACE 3D, Caesar II, and Pipe-Flo Professional/Trane Pipe Designer., • Candidate will be expected to lead and mentor less experienced engineers and designers through the design process., • Other related duties as assigned by the Department Manager or Project Manager, • Required Qualifications:, • Bachelor’s degree in mechanical engineering from and ABET accredited College or University with 8-10 years of experience., • P.E. Licensure and willingness to get licensed in additional states is required, • Ability to travel approximately 5-10% of the time (domestic and international)., • Candidate should be familiar with Microsoft Office., • Experience with ProjectWise or similar enterprise content management tools is a plus., • Energy modeling experience preferred but not required., • AABC CxA certification preferred but not required.Preferred Qualifications:, • Experience designing HVAC systems, plumbing systems, central utility plants, and mechanical distribution systems, • Experience using Trane Trace, Revit, Pipe-Flo, COMcheck, and/or BLCC software

Job Description Job Summary This Electrical Designer I position creates basic designs for electrical power and control systems utilizing skills, knowledge, acceptable concepts, practices, and procedures recognized within the electrical engineering field. This position relies on instructions, pre-established guidelines, and design standards combined with the computer-aided design (CAD) to perform the required functions. This position provides support to Senior Designers, Engineers, and Project Managers This position receives assignments from a Project Manager, Engineer or Senior Designer Guidant provides best-in-class electrical safety solutions—Arc Flash Assessments, Infrared Thermography, and Electrical Safety Training—helping organizations meet compliance, reduce risk, and protect their people. We're not just checking boxes—we're driving a culture of safety. Key Responsibilities • Familiar with safety equipment, uses it as required, comply with company safety policies, demonstrate awareness and concern for safety of self and co-workers at all times, • Answerable for assigned responsibilities, • Develop and maintain professional, cooperative, positive relationships with colleagues, • Set high expectations of performance for self, strives for accuracy, attention to details, completes tasks per schedule, pro-active sense of commitment and enthusiasm, • Take proactive actions to respond promptly in appropriate capacity necessary to meet project demands, • Communicate timely, clearly, and to the point; respectful of other person’s opinion and exhibits excellent listening skills and comprehension, • To be professional, tactful, responsive, strong client relationship and sensitive to client’s needs, • Identify and clarify the problem, gather and assess causes and solutions, derive well-reasoned conclusions, test against relevant criteria and standards, chooses the best alternative, • To be organized, tidy, on time, quiet, non-intrusive, productive and maintains composure and professionalism under stress, • Treats people with respect and honesty, and keeps commitments, • Provide basic electrical power and control designs and details for installations of electrical and control systems, • Utilize Morrow Engineering established practices, standards and procedures to perform tasks, • Develop or revise designs, details, and drawings from experience, existing designs, sketches, verbal instructions, and written directions, • Review drawings and designs to ensure adherence to established CAD standards, • Develop or revise designs, details, and drawings in accordance with established CAD guidelines, • Review all designs for accuracy and completeness prior to submitting, • Prepare as-built drawings from field generated markups, • Perform work under the technical supervision of a Project Manager, Engineer, or Senior Designer, • Cooperate with the project team to maximize the success of the project, • Must be effective at communicating with written and oral communication skills, • Work on concurrent projects and proportions time appropriately, • Complete assigned work within agreed upon schedule, • Demonstrate initiative in seeking additional tasks and responsibilities, • Complete work assignments with a strong emphasis on technical accuracy and overall attention to detail, • Prepare and assemble documents for shipment (i.e., photocopying, binding, etc.), • Operate peripheral equipment (i.e., printers, copiers, plotters, etc.), • Participate in occasional trips to project sites to gather/verify existing information, • Associates or Technology Degree and/or 2 years of experience in the field of industrial electrical power, power distribution, and control system design, • Excellent oral and written communication skills, • Demonstrated knowledge of, and ability to apply, the current National Electrical Code, NFPA 70, Chapters 1, 2, 3, 4, and 9, • Demonstrated basic knowledge of industrial type electrical distribution systems, • Demonstrated basic knowledge of industrial type electrical distribution equipment, • Capable of reading and understanding single line diagrams, riser diagrams, power, lighting, grounding, and instrument plans, • Capable of reading and understanding schematic, wiring, instrument loop diagrams, and P&ID’s, • Familiar with industrial and/or manufacturing facilities, • Basic ability of reading, understanding, and utilizing building and mechanical drawings, • Demonstrated knowledge of commonly used electrical design concepts, practices, and procedures, • Demonstrated ability to apply AutoCAD techniques and drafting skills specifically related to electrical power and control systems, • Demonstrated basic ability to apply applicable electrical design software such as conductor sizing, conductor de-rating, lighting, cable pulling, and cable tray loading., • Must have working knowledge of Microsoft Word, Excel, and Outlook, • Must be capable of accurately performing technical calculations, • Competitive base salary, • 401(k) with company match, • Health, dental, vision insurance, • Paid time off and holidays, • Professional development opportunities eHeLJUvWRC

Job Description ICT Designer - Mission Critical HED is looking to add a talented person to our ICT team. The ICT Designer builds on foundational design knowledge to contribute to the execution of complex mission critical technology infrastructure projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role emphasizes developing expertise in systems such as structured cabling and security while deepening coordination capabilities and technical acumen. Essential Functions: • Perform basic calculations for conduit fill, cabling distances, and equipment loads with limited oversight., • Collaborate with project engineers and architects to coordinate technology system layouts with building design., • Contribute to redline markups and assist in delegating documentation tasks., • Participate in QA/QC reviews and resolve technical or graphical issues in documentation., • Review and edit specifications under the guidance of project engineers., • Attend project meetings and site visits to support coordination and client interaction, • Manage assigned project hours and report progress to team leads., • Engage in HED’s Design Work Planning (DWP) process and estimate time required for task completion.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2+ years of experience in technology infrastructure design or a related AEC discipline is required., • RCDD certification is greatly preferred., • Proficient in Revit; experience with AutoCAD, Bluebeam, and Microsoft Office., • Familiarity with standards such as BICSI, EIA/TIA, and NEC., • Strong organizational and communication skills., • Self-motivated with a collaborative mindset and enthusiasm for innovation.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.

Job DescriptionSalary: BranchPattern is an engineering and building science firm committed to creating spaces that perform at the highest level, technically, environmentally, and humanly. Our Technology group sits at the intersection of built-environment expertiseand emerging digital intelligence, delivering ICTandSecurityon projects across the country. Wedon'tjust designbuildingsystems; we shape how people experience buildings. We are scaling. Our 10x vision is not a metaphor; it is a strategic roadmap to grow our practice into a nationally recognized leader in smart, human-centered building technology consulting. To get there, we need people who are technically sharp, intellectually curious, and motivated by the idea that buildings can, and should, work better for the humans inside them. This is not a siloed drafting position. This is a role for someone who wants to own the technical narrative of a project from schematic design through construction administration and who understands that great ICT and security design is inseparable from great architecture. As an ICT & Security Consultant / Designer, you will serve dual roles: a hands-on technical designer producing construction documents and specifications, and a consulting partner engaging clients, coordinating with multidisciplinary teams, and translating complex infrastructure into clear, actionable design intent. You will be an active contributor toBranchPattern's growth, participatingin business development, client relationships, and thought leadership as we expand our presence. Design & Technical Delivery • Lead and produce ICT system designs: structured cabling (ISP/OSP copper and fiber), horizontal distribution, telecom room layouts,bondingand pathways, • Design and specify security systems including Access Control, Video Surveillance (CCTV/IP), and Intrusion Detection, • Author complete construction document packages schematic design through 100% CDs including drawings, specifications, and basis-of-design narratives, • Develop network topology diagrams and schematic interface documents supporting integrated ICT, AV, security, and smart building infrastructures (BMS, EMS, lighting), • Perform construction administration: respond to RFIs, review submittals, supportcommissioning,and close-out, • Conduct site surveys and existing condition assessments to inform design decisions, • Produce deliverables in Revit and AutoCAD;proficiencyin BIM coordination expected Consulting & Client Engagement • Serve as a primary technical contact for clients across sectors, including education, healthcare, commercial, and civic, • Lead project meetings, present design concepts, and translate technical requirements into compelling, client-ready narratives, • Coordinate closely with architects, MEP engineers, AV consultants, and general contractors to deliver seamlessly integrated solutions, • Participate in business development activities, including RFP responses, client presentations, and market outreach upon request., • Contribute toBranchPattern's external presence, white papers, industry events, thought leadership content, as the firm scales its profile nationally Team & Practice Development • Mentor junior designers and support a culture of continuous technical growth within the Technology group, • Perform QA/QC review of ICT/security design documents, • Stay current on emerging technologies and embed innovation deliberately, not just for novelty, but in service of better building performance, • Maintain and expand knowledge of TIA/BICSI standards, IBC, NFPA, and relevant codes Required Qualifications • 3+ years of experience in ICT and/or security systems design within an A/E consulting environment, • Demonstrated experience designing structured cabling (ISP/OSP), access control, video surveillance, and intrusion detection systems, • Proficiencyin producing full construction document packages including drawings and specifications, • Experience working within multidisciplinary design teams (architects, MEP, structural), • Strong client communication and presentation skills comfort in front of a room is essential, • Proficiencywith Revit and/or AutoCAD; Bluebeam Revu; Microsoft Office Suite, • Bachelor's degree in Electrical Engineering, Technology, Telecommunications, or a closely related field, or equivalent demonstrated experience Preferred Qualifications • RCDD (Registered Communications Distribution Designer) strongly preferred, • PSP (Physical Security Professional) or CPP credential, • BICSI DCDC, OSP, or RTPM credential, • Experience with BIM coordination and smart building network integration (BMS, EMS, metering, lighting control), • 10+ years of experience for a senior-level consideration BranchPattern is a great place to work! We are building a practice that thinks differently about built environments. The people who do well here are not just technically excellent, they'recurious about why systemsfail toservepeople, andmotivated to do something about it. They bring a point of view to their work. Theyaskhard questionsindesign reviews. They see business development not as a distraction from craft but as an extension of it. If you are looking for a seat at abigfirm where you execute the same playbook on repeat, this is not that. If you want to help define what smart building consulting looks like as the industry matures, and to grow your career in step with a firm that is growing strategically and intentionally, we want to hear from you.If you are ready to make a difference and improve the lives of our communities, apply today. • Flexible work hours that allow you to balance work and life., • Casual work environment where you can dress for your day., • Employee ownership and the freedom to be an entrepreneur., • Paid volunteer time and parental leave so you can care for others., • Paid birthday holidays and wellness initiatives so you can care for yourself., • Genuine and progressive leadership who put people first., • Clear career paths and mentors that want you to excel., • Paid certifications and memberships to build your leadership in the industry., • Fully paid medical, dental, and vision insurance for all employees., • Employee Stock Ownership Plan (ESOP) Shares and Profit Sharing., • 401k with a company match. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin.

Job Description At BSA, we design spaces that inspire and support healing, learning, and discovery. We are seeking an upcoming graduate in Electrical or Architectural Engineering to join our Denver team as an Electrical Designer. In this role, you will collaborate with a talented, multidisciplinary team to help create environments that make a lasting, meaningful impact on communities. What You'll Do: • Provide support to the Electrical Engineer on assigned projects., • May attend client, consultant, or design committee meetings., • Develop quality project documents., • Assists in design and documentation of projects., • Participates in various design and construction phases of projects., • Participates in project debriefs and lesson’s learned sessions., • Educational Background: Bachelor's degree or Professional degree in Electrical or Architectural Engineering Why BSA? At BSA, we empower our team members to make a meaningful impact. As a 100% employee-owned firm recently recognized by Zweig Group as one of the 2025 Best Firms To Work For and a Top 25 Hot Firm, you'll have a direct financial stake in our growth and success while benefiting from a collaborative and innovative environment. Join us and be part of a team dedicated to creating spaces that support healing, learning, and discovery. Exceptional Benefits: We offer a comprehensive benefits package from day one, including: • Medical, dental, and vision coverage, • Flexible Time Off (FTO), • Parental leave, • Hybrid work schedule, • Paid volunteer time and a giving back Program, • Employer-matched retirement funds and Employee Stock Ownership Plan (ESOP), • Modern, collaborative work environment with free parking at all studios Why You’ll Thrive at BSA: Our core values define us: • Partners: We value team success as much as individual achievements., • Purposeful: Our designs are rooted in creating inspired solutions for healing, learning, and discovery., • Learners: We embrace growth, striving for expertise and sharing knowledge., • Owners: As employee-owners, we’re empowered to think and act with purpose. BSA is an equal opportunity employer. BSA is unable to offer visa sponsorship now or in the foreseeable future. Candidates must be legally authorized to work in the United States without the need for current or future visa sponsorship.

Job Description At AE Design, we believe great design starts with great people. Founded in 2004 on a foundation of friendship and shared vision, our firm has grown into a dynamic team dedicated to delivering exceptional design solutions. Our culture is built on collaboration, curiosity, and a commitment to excellence. We foster an environment where knowledge is shared, ideas are valued, and every team member is empowered to contribute to our success. Through proactive communication and meticulous attention to detail, we create seamless experiences for our clients-anticipating needs, solving challenges, and delivering thoughtful, responsible designs. As an integral part of the Denver AEC community, we take pride in supporting industry organizations and local nonprofits that align with our values. Sustainability, innovation, and partnership are at the heart of everything we do, ensuring that our work not only meets today's needs but also contributes to a better future. At AE Design, we don't just complete projects-we build lasting relationships, provide high-touch service, and make our clients' lives easier. Our passion for design and dedication to excellence drive us forward, shaping the spaces and communities we serve. General Role Description The Project Designer / Project Engineer provides creative and proactive solutions for our clients and their projects. The role collaborates with other design disciplines to ensure a complete design solution. The role takes direction from the Senior Project Designer / Senior Project Engineer and incorporates all design decisions into the design documents. This role is responsible for the day-to-day design, production, and collaboration for all sizes of projects. This role is a resource to the Senior Project Designer / Senior Project Engineer and should proactively assist in accomplishing the overall goals of the project. This position reports to the Senior Project Designer and/or Senior Project Engineer. Key Responsibilities • Assist with projects of varying complexity, ensuring timely completion of design tasks within budget and schedule., • Collaborate with clients, consultants, and internal teams to deliver programming, conceptual, and detailed design solutions., • Manage multiple project timelines effectively and demonstrate strong organizational skills., • Work within the agreed upon design workflow for the project design team. Ensure timely completion of design tasks, within their individual assigned budget; adjust timelines to ensure timely delivery., • Serve as secondary client contact: respond promptly to emails, facilitate meetings, resolve design issues, and coordinate internal team participation in meetings and calls, on select projects., • Be an active participant in design meetings to resolve design issues and build consensus., • Attend site visits as needed and document findings., • Ensure design materials comply with applicable codes, regulations, and project specific requirements., • Review construction documents, shop drawings, and RFIs for alignment with design intent and client objectives., • Understand the scope of the project and bring additional scope request(s) to the attention of the Senior Project Designer and Senior Project Engineer., • Assist senior team members with design risk management and resolution., • Be active in industry and/or client related organizations, • Establish relations with peers at the Client's firm to yield repeat work, • Contribute project-specific content for select RFPs and support client presentations., • Continue developing expertise in power, lighting, and technology design while adhering to quality control procedures., • Complete internal education programs, and foundations, for each studio they are involved with., • Continuously develop consulting skills while working with clients and internal team members., • An undergraduate degree in Architectural Engineering, Electrical Engineering or a closely related discipline, • 2-5 years of professional experience working in an architectural / lighting or MEP firm with an emphasis on electrical systems design, • The capability to apply Electrical Engineering and Lighting Design principles to projects of all sizes and categories, • Experience with AutoCAD, REVIT, and Bluebeam, • Capable of managing your time and activities for optimum productivity, • The talent and adaptability to work well with people at all levels of the organization, • A desire to build relationships and work directly with our clients - this is key to your success, • Not really interested in the status quo - you have a hunger for learning and growing professionally, • Competitive salary and benefit plan (401k, HSA and more), • An environment which supports continued education, professional development and personal growth with opportunities to learn outside of the office and through our mentorship program, • An open office, enthusiastic and collaborative coworkers, and out of office events ranging from happy hours to ski trips, • A dedication to a true work-life balance, • The chance to work on a variety of projects, and learn about low-voltage, audio/visual, special systems, commissioning and the other services we provide, • The opportunity to get out of the office for site visits, client visits, seminars and networking opportunities, • A condensed 4.5 day work week - we work full time, but we love our half day Fridays!, • A great bonus incentive program, • Opportunity to help grow with a highly reputable company who does beautiful work

Job Description Hazen and Sawyer is seeking a process mechanical CAD/BIM Designer based in Denver to work alongside staff Engineers and Senior CAD Designers, in the design and production of contract documents for various Water, Wastewater, Pump Station, and Pipeline projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK.Key Responsibilities:, • Prepare site plans, plans, sections, and details for water, wastewater and stormwater facilities., • Coordinate with other disciplines (Site Civil, Structural, Architectural, HVAC, Electrical, and I&C) to help resolve design conflicts and challenges., • Ensure drawings comply with company and client CAD/BIM standards and styles, • Create BIM models, Revit families, and CAD based files for use in the production of contract documents., • Revit knowledge and skills required, • Some 2D AutoCAD MEP skills desired, • Completion of technical school CAD design certificate with emphasis on Revit or Engineering Technology Associate’s degree, • Some design experience with water and/or wastewater projects desired, • Basic understanding of process and chemical piping materials and fittings helpful, • Hardworking, focused, and willingness to learn is important What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. As a Senior CAD Designer, you will join our growing civil engineering team and play a key role in delivering complex design solutions. The ideal candidate will lead civil engineering design efforts, mentor junior designers, and provide technical solutions using advanced 2D and 3D CAD knowledge. In this role, you will take ownership of design quality and accuracy, ensuring compliance with project standards and client requirements. You will work closely with engineers and other disciplines to develop detailed construction plans and exhibits for a variety of civil projects, including site development, grading, drainage, and stormwater management. This position also involves coordinating with survey, geotechnical, and structural teams, troubleshooting design challenges, and maintaining CAD standards and templates to support efficient workflows.Job Responsibilities: • Lead the development of civil engineering designs and construction plans, including grading, drainage, and site layout., • Utilize AutoCAD and Civil 3D for alignments, profiles, and grading features to produce engineered plans and sheet setups, including plan views, sections, elevations, and details., • Apply advanced concepts for site grading, storm drainage, erosion and sediment control, and stormwater best management practices., • Collaborate with civil engineers to interpret design intent and translate it into accurate CAD drawings., • Coordinate with other disciplines such as survey, electrical, geotechnical, and structural engineering to ensure seamless design integration., • Troubleshoot and solve design challenges with practical, client-focused solutions while applying creativity and independent thought.Position Requirements:, • An associate or technical degree in CAD, civil engineering technology, or a related field is required., • Eight or more years of experience in civil design, with strong proficiency in Civil 3D., • Advanced understanding of civil design principles, including grading, drainage, and stormwater management., • Ability to lead projects, mentor junior staff, and maintain design standards., • Ability to lead projects, mentor junior staff, and maintain design standards.

Job Description At AE Design, we believe great design starts with great people. Founded in 2004 on a foundation of friendship and shared vision, our firm has grown into a dynamic team dedicated to delivering exceptional design solutions. Our culture is built on collaboration, curiosity, and a commitment to excellence. We foster an environment where knowledge is shared, ideas are valued, and every team member is empowered to contribute to our success. Through proactive communication and meticulous attention to detail, we create seamless experiences for our clients-anticipating needs, solving challenges, and delivering thoughtful, responsible designs. As an integral part of the Denver AEC community, we take pride in supporting industry organizations and local nonprofits that align with our values. Sustainability, innovation, and partnership are at the heart of everything we do, ensuring that our work not only meets today's needs but also contributes to a better future. At AE Design, we don't just complete projects-we build lasting relationships, provide high-touch service, and make our clients' lives easier. Our passion for design and dedication to excellence drive us forward, shaping the spaces and communities we serve. General Role Description This role leads the successful execution of assigned design projects, serving as the primary point of coordination between clients, engineers, project managers, and design teams. Responsibilities include managing project schedules, budgets, and design-team resources while ensuring compliance with codes and quality standards. The position requires strong leadership in training designers, delegating tasks, and driving project technical design strategy from kickoff through completion. Individuals will actively engage in client relationship management, business development efforts, and risk management, while maintaining technical proficiency of the engineered design. Effective communication, time management, and commitment to team development are essential for success in this role. This position reports to Studio Lead and has direct supervisory responsibilities over the Project Designer/Project Engineer position. Key Responsibilities • Lead execution of design projects from start to finish, ensuring compliance with codes and sound engineering principles., • Function as project lead, coordinating with project managers, architects, engineers, and internal teams to meet deadlines and maintain quality standards., • Strategize and implement a design workflow for the project design team. Manage project schedules, budgets, and resources effectively; adjust timelines and delegate tasks to ensure timely delivery., • Oversee design intent in construction documents, shop drawings, and RFIs; review work for quality assurance and regulatory compliance to ensure consistency with client needs and design objectives., • Apply broad engineering knowledge to design engineered systems and oversee projects through construction and completion., • Serve as secondary client contact: respond promptly to emails, facilitate meetings, resolve complex design issues, and coordinate internal team participation in meetings and calls, on select projects., • Drive consensus in meetings and guide project strategy, task assignments, and internal progress planning., • Attend select predesign and construction phase site visits and document findings., • Lead specification writing, editing, and formatting; leverage internal resources for document preparation., • Conduct frequent check-ins with design teams, review project goals, develop internal project milestone check-ins, follow SOP, and assess progress; intervene when client satisfaction or deadlines are at risk., • Own the completion of all deliverables. Responsible for project deliverables review prior to sending., • Take ownership of design risk management and project completion accuracy; ensure readiness for QA/QC review., • Proactive studio communication with other Studio Seniors., • Participates in post-project debrief., • Actively engage in business development opportunities with current and prospective clients., • Train and coach designers in technical skills, time management, and consulting practices; support foundational learning programs and educational initiatives., • Participate in performance review process for assigned direct reports., • Communicate effectively across all stakeholders-clients, engineers, PMs, and design teams-to ensure clarity and alignment., • Assist Principals and Project Managers with proposal preparation for new project opportunities and active project additional service proposals., • Continuing education with new industry knowledge and products, approaching opportunities with the "Passion" core value standards., • Demonstrate leadership in industry and/or client related organizations., • Lead by example by engaging and participating with internal company initiatives, • Establishing relations with peers at the Client's firm to yield repeat work., • Participates in Client presentations, such as Lunch and Learns., • An undergraduate degree in Architectural Engineering, Electrical Engineering or a closely related discipline, • Experience in the AEC industry as an electrical engineering consultant for 5+ years, • An active presence in professional and client-related organizations, • The ability to communicate effectively with owners, clients, contractors as well as co-consultants, • The ability to excite, engage, and develop younger staff, • The ability to work as a team player on the design teams and within the office structure, • Experience in drafting client-consultant agreements and fee preparation, • Positive financial management for projects, • Experience with AutoCAD and REVIT

Job Description Candidate will provide electrical design for water and wastewater facility projects. Qualified candidate should have an interest in industrial power systems design, including low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities. Candidate should have familiarity with the NEC and related Codes. Candidate must also have good communication skills. Candidate will serve as an electrical designer on projects for water and wastewater facilities. Responsibilities include executing redline markups from more experienced engineers, sizing conduit and wire, laying out electrical distribution equipment, designing lighting systems, and interaction with engineers from other disciplines. Additional Qualifications/Skills: • Experience with Autocad and Revit BIM software is desirable, • Experience with Microsoft Office products is required, • Experience with SKM and/or ETAP software is desirable, • 0-4 years of experience required, • Passing or having the ability pass the Fundamentals of Engineering exam is desirable Educational Requirements:

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Electrical DesignerLocation - Denver, CO (Centennial)Job Type - HybridRequisition ID - 11124 Stanley Consultants is seeking an Electrical Designer with background in building services and plant facilities design for military, higher education, institutional, utility plant, and industrial clients. Technical responsibilities will include the design and layout of any / all of the following: site and building power distribution with medium and low voltage systems, switchgear, panelboards and motor control centers; convenience power, grounding, lighting, and lightning protection systems in REVIT or AutoCAD. Position will be responsible for design efforts, with expectations of performing design duties under supervision. Must be able to coordinate technical efforts within discipline areas as necessary, managing a design budget and schedule, and be able to demonstrate proficiency in these areas. Candidate should be familiar with Microsoft Office. Design experience with AutoCAD and REVIT are required. Design experience with AGi32 Lighting Analysts or similar lighting analysis software is preferred. Design experience with military bases, central plants and campus infrastructure is also a plus.Required Qualifications: • 3+ years of relevant design experience., • Great design experience with AutoCAD and REVIT, in both cases ability to set up electrical drawings, and pick up marks ups from electrical engineer., • Good understanding of the National Electrical Code., • Experience with designing lighting systems is preferred., • Experience with designing power distribution and grounding systems preferred., • Experience with designing communications and security systems preferred., • Understanding of developing engineering drawings and specifications., • Perform basic engineering design.

Electrical Designer, you will be the backbone of our electrical design team. A minimum of 5 years of experience as an Electrical Designer in the construction industry. Electrical Designer to join our vibrant team in the construction industry.

Abacus Corporation - - Responsibilities: Work as part of a team performing highway maintenance tasks; Perform general maintenance of potholes, fences, seed/sod, herbicide, etc.Respond to road incidents and debris as needed; Operate heavy equipment as required; Repair signs, bridges, guardrails, and

Packaging Corp of America - - Responsibilities: Diagnose, repair, rebuild, or replace mechanical, electrical, hydraulic, and pneumatic systems on plant equipment; Perform preventive maintenance activities in a production environment; Respond to breakdown calls in a timely manner; Work as part of a

Safeway - JobID: 685479 [Field Technician / Maintenance Mechanic] As a Maintenance Technician at Safeway, you'll: Ensure operation of electrical, mechanical, hydraulic & pneumatic equipment by completing preventative maintenance requirements.

Purina - JobID: 394800 [Maintenance Mechanic] As a Multicraft Mechanic Millwright Electrician at Purina, you'll: Troubleshoot and repair plant systems including mechanical, electrical, hydraulic, pneumatic, and instrumentation; Repair gear reducers, belt and screw conveyors, chain elevators, and pac

Albertsons - 4301 Forest Street - Responsibilities: Troubleshoot and repair electrical, mechanical, hydraulic, and pneumatic equipment; Perform preventive maintenance to minimize downtime; Maintain accurate maintenance records and paperwork; Collaborate with production teams to resolve issues; Procu

PrideStaff - - Responsibilities: Troubleshoot and replace defective electrical, hydraulic, pneumatic, and mechanical components; Maintain records of maintenance and repair work; prepare reports, documentation, and correspondence; Draw and read electrical and mechanical schematics, blueprints, and/o

Avenue5 Residential - - Responsibilities: Address an array of apartment and property maintenance duties as specified by the maintenance supervisor and/or property manager; Perform repairs to electrical, plumbing, appliances, flooring, carpentry, HVAC, grounds maintenance; Perform general carpentry

Responsibilities: Respond to work orders for minor repairs to equipment; Ordering/manage parts inventory, complete daily reports, and schedule/prioritize assignments to ensure efficiency; Read, understand, and follow service manual guidelines; Work safely and handle other duties as assigned; Tackle

Aerotek - - Responsibilities: Lead major repairs, rebuilds, and troubleshooting of mixers, pumps, gearboxes, hydraulic systems, electrical panels, and automated packaging equipment; Perform advanced mechanical, electrical, hydraulic, and PLC diagnostics with strong root cause analysis; Develop and

The Salvation Army (Western) - - Responsibilities: Assist in cleaning the assigned facility (inside and outside in a clean and sanitary condition, including but not limited to: replenishing bathroom and sanitation supplies, sanitizing areas such as bathrooms and general surfaces, vacuum/mop/sweep f

This includes troubleshooting, performing preventive maintenance, and repair work on furnaces, boilers, solar systems, plumbing, electrical, building systems, structures, HVAC equipment, commercial laundry facilities, fire protection systems and alarms, gas fuel piping, elevators, electrical systems

Temporary Maintenance & Custodial Technician.Job Category: Facilities/Maintenance/Janitorial.Requisition Number: TEMPO021805.Location: Denver, CO 80216, USA.Employment Type: Full Time - non-exempt.Reports To: Facilities or Operations Manager.Employment End Date: 12/31/2025.Benefits: Temporary; Full-

N-Hance is an innovative and affordable cabinet and floor renewal service that renews wood cabinets and floors without the dust, inconvenience and noxious fumes associated with traditional refinishing methods.Established in 2001, N-Hance Wood Renewal has been franchising since 2003.We are growing an

Maintenance and Custodial Technician.Job Category: Facilities/Maintenance/Janitorial.Requisition Number: MAINT022236.Location: Denver, CO 80216, USA.Job Title: Temporary Maintenance and Custodial Technician.FLSA Status: Temporary through 12/31/2025 - non-exempt.Reports to: Facilities Manager or Oper

This Jobot Job is hosted by: Tiffany D'Angelo.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $135,000 - $160,000 per year.Our client is a nationally recognized general contractor with a strong presence in the Rocky Mountain region and a long

This includes regular maintenance on HVAC, electrical, mechanical, utility systems, interior finishes, and appliances and coordinate work with journey level technicians and contractors. These work orders include requests for the repair of minor electrical items, including lighting, minor plumbing it

IPP/Developer votd BEST place to work - offering steady growth!!.This Jobot Consulting Job is hosted by: Ruby Voight.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $120,000 - $160,000 per year.We are a national renewable energy provider that

Team Coordination: Lead and coordinate efforts among designers, engineers, contractors, and subcontractors to ensure alignment and successful project execution.

FP & A Manager - Global leader in Engineered Metal Products.This Jobot Job is hosted by: Jamal Elkhateib.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $100,000 - $120,000 per year.We're not just another manufacturer.We're a global leade

Completes tasks associated with preventative maintenance, repairs and operational support for the following areas: plumbing, electrical, carpentry,.