Trabajos electronics technician en Los Angeles, CaliforniaCrear alertas

Job Description As an Army National Guard Military Intelligence (MI) Systems Maintainer/Integrator, you’ll earn a security clearance and play a vital role in ensuring MI computer systems, networks, electronic warfare and intercept devices operate on the battlefield without fail. As the subject matter expert on MI systems, you ensure MI Soldiers can find and never lose the enemy. You enable the ongoing process of military intelligence collection and analysis, so our military experts can better defend our Nation. Specific duties as an MI Systems Maintainer/Integrator include: maintaining, testing, and repairing communications equipment; maintaining and integrating MI computers and networks; assessing and extracting data from fixed, portable, and wireless storage/communication devices; and performing operational checks on MI aerial platforms, sensors, and systems. Some of the Skills You’ll Learn • Virtual Machine, Server, and Database Administration and Management, • Microsoft, Linux, Unix Operating System Administration, • Cisco and Dell Network device administration; Hardware and Software, • Network Attached Storage (NAS) principles, • Electronic principles, • Maintenance procedures, • Basics of maintaining equipment used for intelligence gathering, • Interest in math, • Ease with computer systems, digital networks and electronic equipment, • Strong attention to detail Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance and certifications. Job training for an MI Systems Maintainer/Integrator consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 42 weeks of Advanced Individual Training (AIT), giving you hands-on experience using sophisticated intelligence systems and networks. Your initial entry training in the Army National Guard could also lead to additional college credit. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Earn a security clearance, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans Requirements • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards

Job Description Communication is the pulse of Army National Guard units, and it’s up to the Signal Support Systems Specialist to ensure the information keeps flowing so the military doesn’t miss a beat. Signal Support Systems Specialists are responsible for integrating signal systems and networks; performing signal support functions and unit-level maintenance on authorized signal equipment; and installing, operating, and maintaining radio and data distribution systems. Advanced team members supervise and train other Soldiers; maintain and install signal support systems and terminal devices; provide technical assistance and training for automation and communications equipment; prepare maintenance and supply requests for unit-level signal support; and operate and perform preventative maintenance checks and services on assigned vehicles. Job Duties • Maintain radio and data distribution systems • Perform signal support functions and technical assistance for computer systems • Provide technical assistance and training for local area networks • Maintenance for equipment, terminal devices, assigned vehicles, and power generators Some of the Skills You’ll Learn • Mechanical and electrical principles • Preventive maintenance procedures • Line installation and wiring techniques • Communication security policies and procedures Helpful Skills • Interest in working with electronic equipment • Interest in problem solving Through your training, you will develop the skills and experience to enjoy a civilian career with companies that produce communications and electronic equipment. Additional study and two years of electronics experience will also qualify you for certification as an Associate Certified Electronics Technician. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for Signal Support Systems Specialists consists of 10 weeks of Basic Training, where you’ll learn basic Soldiering skills, and 18 weeks of Advanced Individual Training (AIT) which will include a combination of hands-on and classroom training. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Email me jobs like this

Job Description Professional Search Group (PSG) is seeking a Test Technician to join their client's team! This is an exciting role in a growing company. The ideal Test Technician for the position is someone who has experience in product development, manufacturing, electronics, and mechanical assembly. The role is critical to success and will be responsible for RF circuit board testing. This Test Technician will also be flexible and support electro-mechanical assembly and harness building as required. Responsibilities: • Understands, plans, and executes testing and troubleshooting activities to produce a prototype, MIL-STD understanding desired, • Assembles LRU and element array with direction from Engineers, • Utilizes standard laboratory test equipment including: oscilloscopes, logic analyzers, spectrum analyzers, network analyzers, voltmeters, and other measurement equipment to perform engineering support functions, • Troubleshoots equipment using standard documentation packages including assembly drawings and schematics, • Works with various levels of the system (from the board and component level to the LRU, to the system level) to identify and resolve performance problems, • Mentors less experienced peers and provides feedback on assembly work, • Experience with electro-mechanical assembly, • Minimum of 2 years RF test experience, • Testing and troubleshooting skills with the capability of defining and configuring standard and special test equipment to perform tests at the circuit card, LRU or system level, • Ability to work with standard laboratory test equipment, • Knowledge of Environmental, Health and Safety elements, especially related to RF testing, • Good written and oral communication skills, • Computer skills to use MES system, JIRA, etc., • Collaborative; capable of working across all levels of the organization, • Associates Degree in technical field or equivalent trade school or military training., • 2-4 years of related experience, • Soldering certification and experience soldering cables and harnesses (circuit boards come pre-assembled), • Aerospace/Defense experience and/or military experience, • Knowledge of Production Systems and Lean Manufacturing elements, • Experience with ISO9001/AS9100 quality management systems elements Apply for this amazing opportunity today! Donovan Aranda Division Manage

Aviation Electronics Technician. As an Aviation Electronics Technician (AT), you'll maintain, troubleshoot, repair and test complex electronic systems related to aviation on tactical jets, fixed wing aircraft or rotary winged helicopter systems. Advanced training as an Aviation Electronics Technicia

Job Description MME - We Are Family - We are seeking entry level applicants to be trained for a new career in 12V/24V Mobile Electronics Installation and Service. If you possess the correct basic skills (working with your hands and small hand tools), a desire to thrive and do well at work, and an exceptional customer service attitude, we want to talk to you! Regional 12V/24V GPS/Telematics/Dash Cam Installation & Service Technicians • Are you seeking a career with an innovative and growing company?, • Do you like placing things in order and solving problems that make a positive impact?, • Are you reliable? Do you show up on time, every day, with no excuses?, • Do you take pride in your appearance and prefer to present a professional image, so you stand out from the competition? The 411 : Role Title: Regional 12V/24V GPS/Telematics/Dash Cam Installation & Service Technicians Employment Type: Full Time, Year Round work Location: Based in the Southern California Area -- approximately 20% overnight and out of town travel required after training is completed. Compensation: Pay range is commensurate with experience and skills, both for installation and organization. A 90-day trial period is mandatory, after which full employment is offered to successful candidates. Comments: Strong possibility of advancement as company growth continues, based on job performance and adherence to company policies and processes. Metro Mobile Electronics, LLC., is an equal opportunity employer specializing in 12V/24V Telematics installation and service. All applicants are required to pass a complete background investigation including criminal, driving, and drug testing. Employment Benefits include: Paid Vacation, Paid Holidays, Sick Leave, Incentive Programs, Group Health, Dental, Life, 401K, Vision Insurance Plans, available short and long term disability, accident and critical illness plans, Performance Pay program, as well as company provided vehicle, iPhone, iPad, and uniforms. Metro Mobile Electronics, LLC. is an EEO employer. While all applicants are thanked for sending in their applications, only those selected for interviews will be contacted. No phone calls please. Please reply with: 1. Resume, 2. Salary History, 3. Salary Requirements Job Type: Full-time Job Location:

Job Description All Temperatures Controlled, Inc. is actively seeking dedicated and reliable Commercial HVAC and Refrigeration technicians to join our expanding team! For over 45 years, we have cemented ourselves throughout the San Fernando Valley and all of Los Angeles with our ability to service, repair, install, and perform maintenance on a diverse range of HVAC, refrigeration, and industrial scale equipment. As a technician, not only will be welcomed into a family, but we will focus on your career growth and knowledge. ABOUT US: Established in 1978, we are a family-owned company that has a strong foundation and longevity in the marketplace with many years to come. Staying true to our core values of People First, Integrity in All Things, Quality, and Reliability, our clients trust us to perform honest, high-quality services. We are an established company that takes pride in our ability to handle residential, light commercial, and industrial HVAC and refrigeration projects with sincere professionalism and true dedication to our craft. If you share in these values and work ethic, then we want you on our team! BENEFITS: • Aggressive and competitive pay, • Paid medical insurance, • Paid vision/dental insurance, • A Matching 401(k) plan, • Paid vacation, sick, holiday, and attendance pay, • Additional voluntary benefits, including disability and life insurance, • Paid training and continuing education, • Company vehicle, cell phone, and uniforms, • Dispatched from home daily, • Year-round diverse work, • 3+ years experience in troubleshooting and repair of Refrigeration and HVAC/R Commercial equipment, • Have own industry-specific tools, • Strong work ethic and desire to gain industry knowledge, • Problem solving, critical thinking, and mechanical aptitude skills, • Excellent verbal, written, and interpersonal skills, • Physical ability to perform the requirements of the position, • A valid driver's license and clean driving record, • Available and willing to work overtime and the 24 emergency on-call cycle Our Commercial HVAC/R Technicians are responsible for the operations, repairs, replacement and preventative maintenance of commercial and industrial air conditioning and heating systems. This includes walk in boxes and refrigerators, ice machines, kairak refrigeration systems, air handlers, fan coil units, cooling towers, chillers, controls and other building mechanical and electrical equipment. Job duties include: • Perform skilled repair or maintenance operations, using equipment such as hand or power tools, • Provide quality customer service while troubleshooting and diagnosing air conditioning, refrigeration, heating units and various other associated equipment, • Maintain detailed documentation of service work performed, with complete reports, parts needed, and condition of systems needed for any follow ups, • Assist with providing estimates, proposals, follow-ups, bid preparation and parts orders when assigned or needed, • Participate in rotating on-call schedule as needed, • Maintain good working order of company vehicle, equipment, and electronics, • Travel to job sites in service area and work with dispatcher to ensure schedule is maintained and delays are properly communicated to customer Pay: $30 - $50 an hour If you are excited about this HVAC/R tech opportunity, don't delay. Apply today!

Job Description OVERVIEW: All Temperatures Controlled, Inc. is actively seeking dedicated and reliable HVAC service technicians to join our expanding team! For over 45 years, we have cemented ourselves throughout the San Fernando Valley and all of Los Angeles with our ability to service, repair, install, and perform maintenance on a diverse range of HVAC, refrigeration, and industrial scale equipment. As a technician, not only will be welcomed into a family, but we will focus on your career growth and knowledge. SERVICE AREA: Throughout the San Fernando Valley and all of Los Angeles. ABOUT US: Established in 1978, we are a family-owned company that has a strong foundation and longevity in the marketplace with many years to come. Staying true to our core values of People First, Integrity in All Things, Quality, and Reliability, our clients trust us to perform honest, high-quality services. We are an established company that takes pride in our ability to handle residential, light commercial, and industrial HVAC and refrigeration projects with sincere professionalism and true dedication to our craft. If you share in these values and work ethic, then we want you on our team! BENEFITS: • Aggressive and competitive pay, • Paid medical insurance, • Paid vision/dental insurance, • A Matching 401(k) plan, • Paid vacation, sick, holiday, and attendance pay, • Additional voluntary benefits, including disability and life insurance, • Paid training and continuing education, • Company vehicle, cell phone, and uniforms, • Dispatched from home daily, • Year-round diverse work, • 1+ years experience in HVAC preventative maintenance, service, and repair, • Have own industry-specific tools, • Strong work ethic and desire to gain industry knowledge, • Problem solving, critical thinking, and mechanical aptitude skills, • Excellent verbal, written, and interpersonal skills, • Physical ability to perform the requirements of the position, • A valid driver's license and clean driving record, • Available and willing to work overtime and the 24 emergency on-call cycle Our HVAC Service Technicians are responsible for the operations, repairs, replacement and preventative maintenance of commercial air conditioning, heating systems, and refrigeration systems. This includes air handlers, fan coil units, exhaust fans, make-up air units, reach-in refrigeration, walk-in refrigeration, and ice machines. Job duties include: • Perform skilled repair or maintenance operations, using equipment such as hand or power tools, • Provide quality customer service while troubleshooting and diagnosing air conditioning, refrigeration, heating units and various other associated equipment, • Maintain detailed documentation of service work performed, with complete reports, parts needed, and condition of systems needed for any follow ups, • Assist with providing estimates, proposals, follow-ups, bid preparation and parts orders when assigned or needed, • Participate in rotating on-call schedule as needed, • Maintain good working order of company vehicle, equipment, and electronics, • Travel to job sites in service area and work with dispatcher to ensure schedule is maintained and delays are properly communicated to customer Pay: $25 - $35 an hour If you are excited about this HVAC/R tech opportunity, don't delay. Apply today!

MAKS is a globally recognized leader in the rebuilding and restoration of electronic automotive modules, including TIPMs (Totally Integrated Power Modules) and ECMs (Engine Control Modules). These modules serve as the nerve center of modern vehicles, controlling critical electrical and power distribution systems. At MAKS, we are not simply repairing parts—we are rewriting automotive history by developing reliable aftermarket solutions for complex electronic failures. Our work supports a wide network of consumers, professional mechanics, dealerships, and major retailers who depend on us to diagnose and solve difficult vehicle electrical issues. Our culture is built on five core values that guide everything we do: • Trailblazers – We innovate fearlessly in automotive electronics, • Value of Reputation – We earn trust through quality and reliability, • Accountability – We take ownership of our work and outcomes, • Empathy – We support our team and customers, • Evolve or Bust – We continuously improve and adapt We are currently expanding and hiring Electronics Technicians at our facility in Canoga Park, California. If you enjoy hands-on electronics work, problem solving, and working with precision tools, this is a great opportunity to grow in a specialized and in-demand field. Learn more about our work: Responsibilities • Diagnose and test printed circuit boards (PCBs) containing both through-hole and surface-mounted components, • Perform SMT/SMD chip removal and replacement using soldering irons and hot-air rework stations, • Remove and replace through-hole components, • Identify and recognize electronic components and IC packages, • Perform trace repair and board-level troubleshooting, • Use diagnostic tools such as digital multimeters (DVM), oscilloscopes, and other electronic testing equipment, • Conduct testing and inspection to ensure repaired modules meet quality standards, • Assist with TIPM module testing, repair, and refurbishment Must-Have Qualifications • Basic knowledge of electronic components and circuits, • Hands-on experience using soldering irons, hot-air rework stations, and bench tools, • Experience removing and replacing surface-mounted components, • Familiarity with DVMs, oscilloscopes, and other common PCB testing tools, • Ability to perform PCB trace repair, • Strong attention to detail and quality workmanship Nice-to-Have Qualifications • IPC or soldering certification, • Degree or training in electronics technology or hardware repair, • Experience working with automotive electronics, • 2+ years of professional electronics repair experience Position Details • Schedule: Monday – Friday, • Shift options: Between 7:00 AM – 5:00 PM, • Full-time, • On-site only – Canoga Park, CA Benefits • Medical, Dental, and Vision insurance, • Paid Time Off If you’re passionate about electronics and want to build expertise in a highly specialized field, MAKS offers a unique opportunity to work on the systems that keep modern vehicles running.

Now hiring Electronics Technician Location Monrovia, CA Pay Rate: $22.00 per hour Start your next chapter with Staffmark, where people come first, and every role makes an impact. Ready for an Electronics Technician job where you're seen, supported, and appreciated? We're hiring people who make a real impact behind the scenes - because nothing runs without a strong team. You take initiative. You drive results. Here's what we're looking for. • Minimum 3 years of related electronics experience (college coursework may supplement experience), • Associate (AA) Degree preferred, • Ability to read schematics and troubleshoot electronic systems, • Strong electronics aptitude and diagnostic skills, • Experience working with power electronic components such as IGBTs, MOSFETs, transformers, and related components Responsibilities • Build, calibrate, test, and repair power electronic systems, • Perform functional and performance testing to ensure products meet specifications, • Diagnose malfunctions and production issues based on test results, • Disassemble equipment and repair or replace defective components and assemblies, • Rework printed circuit boards (PCBs) as required, • Calibrate and configure products using PC-based software tools, • Calibrate and maintain electronic test instrumentation, • Accurately complete computer-based data entry and maintain service records Join a Team That Works for You At Staffmark, we're more than just a staffing company-we're your career partner. As part of RGF Staffing and Recruit Group, anHR powerhouse behind big names like Indeed and Glassdoor, we've got the muscle and the know-how to get you where you want to go. With more than half a century of experience and a track record of putting hundreds of thousands of people to work every year, we've got your back. Whether you're looking to level up, switch gears, or just get to work fast, we make it happen. Join us and experience the advantage of working with a trusted name in recruiting-because your success is our success. The base pay range listed reflects what we reasonably expect to offer for this role. Actual pay may vary based on location, experience, and performance. Depending on the position, benefits may include medical, dental, and vision coverage; retirement and savings plans; paid holidays and time off; supplemental insurance; and additional wellness or incentive programs. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

Job Description Professional Search Group (PSG) is seeking an Assembly Technician to join their client's team! This is an exciting role in a growing company. The ideal Assembly Technician for the position is a flexible candidate who has experience in product development, manufacturing, electronics, and mechanical assembly. The Assembly Technician is critical to success and will be responsible for electromechanical assembly, harness building, and RF circuit board testing as required. Responsibilities: • Assembly of small to medium sized electromechanical builds, • Harness building, including soldering and crimping, • Assembles LRU and element array with direction from Engineers, • Works with various levels of the system (from the board and component level to the LRU, to the system level), • Experience with electro-mechanical assembly, • Soldering certification and experience soldering cables and harnesses (circuit boards come pre-assembled), • Ability to work with standard manufacturing equipment, • Knowledge of Environmental, Health and Safety elements, • Good written and oral communication skills, • Collaborative; capable of working across all levels of the organization, • Associates Degree in technical field or equivalent trade school or military training, • 2 years of related experience, • Aerospace/Defense experience and/or military experience, • Knowledge of Production Systems and Lean Manufacturing elements, • Experience with ISO9001/AS9100 quality management systems elements

Job DescriptionJob Title: Mechanical AssemblerJob Description Join our team as a Mechanical Assembler, where you will be responsible for assembling high-speed turbo motor, generator, and turbo machinery equipment. Your role will involve performing sub-assembly and full system level testing in accordance with aerospace defense industry standards, using applicable drawings, schematics, and specifications. Responsibilities • Assemble and test motor/generator components and subassemblies., • Utilize metrology tools such as height gauges, calipers, and micrometers for assembly processes., • Calculate stack-up tolerancing of subassemblies., • Use advanced machine assembly tooling, including hoists, cranes, and fixtures., • Conduct electrical checks such as resistance, inductance, and hi-pot using appropriate meters., • Perform functional tests of motors and record pertinent information in build worksheets using Excel., • Collaborate with engineering and manufacturing teams to address design and build issues., • Provide feedback on design and processing to support continuous improvement.Essential Skills, • 3+ years of experience as a technician in a production environment or equivalent education/experience., • Proficiency in mechanical assembly and blueprint reading., • Ability to lift up to 50 lbs., • Understanding of motor/generator theory, power electronics, and magnetic bearing components., • Ability to produce assemblies following routers, work instructions, and blueprints., • Competence in conducting in-process checks of assemblies., • Experience using digital multi-meters, inductance meters, and hi-pot meters., • Proficiency in Microsoft Office tools, including Excel and Word., • Ability to conduct basic verification and troubleshooting of own work.Additional Skills & Qualifications, • Understanding of motor/generator theory is advantageous. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cypress,CA. Application Deadline This position is anticipated to close on Mar 27, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Now hiring Electrical Technician Location Burbank, CA Pay Rate: $25.00 - $28.00 per hour Shift: Day shift At Staffmark, you're not just filling an Electrical Technician position - you're becoming a valued part of a team that wants you to succeed. Want an Electrical Technician job where you're treated like part of the team, not just part of the process? We're hiring motivated individuals who keep things moving - and we don't take that lightly. Every role makes an impact. Here's what it takes to make yours count. • Associate degree in Electronics, or a minimum of 5 years of hands-on experience using related electronic repair and troubleshooting skills., • Fluent written and verbal English communication skills required; Spanish language skills are a plus., • Demonstrated ability to troubleshoot electronic systems down to the component level., • Hands-on experience soldering and desoldering surface mount components., • Working knowledge of Microsoft Office programs, with familiarity in Orcad design software considered a plus., • An understanding of C programming or other related programming languages is preferred., • Proficiency using electronic test equipment, including oscilloscopes, multimeters, and other diagnostic tools., • Mechanical aptitude to support assembly, repair, and troubleshooting tasks., • Familiarity with the movie or film industry is considered an advantage. Right in the Mix. Work side by side with a team that appreciates what you do. Pay That Adds Up. Competitive weekly pay for your time and talent. Health and Happiness. Medical, dental, vision, and life insurance included. Everyday Extras. Employee discounts that make life a little easier. Growth Ahead. Learn, advance, and keep moving forward. Responsibilities • Diagnose and repair microprocessor-controlled motor control systems and various printed circuit board assemblies (PCBAs)., • Perform testing and quality control inspections on electronic and electro-mechanical systems to ensure product performance and reliability., • Troubleshoot and repair customer equipment related to electronic and electrical system issues., • Assemble cable harnesses and electrical assemblies according to specifications and production requirements., • Design and build electronic test jigs to support manufacturing, quality control, and product development processes. Join a Team That Works for You At Staffmark, we're more than just a staffing company-we're your career partner. As part of RGF Staffing and Recruit Group, anHR powerhouse behind big names like Indeed and Glassdoor, we've got the muscle and the know-how to get you where you want to go. With more than half a century of experience and a track record of putting hundreds of thousands of people to work every year, we've got your back. Whether you're looking to level up, switch gears, or just get to work fast, we make it happen. Join us and experience the advantage of working with a trusted name in recruiting-because your success is our success. The base pay range listed reflects what we reasonably expect to offer for this role. Actual pay may vary based on location, experience, and performance. Depending on the position, benefits may include medical, dental, and vision coverage; retirement and savings plans; paid holidays and time off; supplemental insurance; and additional wellness or incentive programs. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

• Job Identification 116507, • Job Category Operations, • Posting Date 03/05/2026, 12:37 AM, • Locations 900 Watson Center Road, Carson, CA, 90745, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Howmet Fastening Systems (HFS) is seeking an Machine Maintenance Technician (Electronics) for our Carson, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Primary Purpose The primary function of this position is to maintain, repair, adjust, and modify the facilities machinery and equipment, as well as the building and its grounds, according to a set schedule and in emergency and non-emergency situations. Responsibilities • Perform technician skills including but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Connects power supply wires to machines and equipment and connects cables and wires between machines and equipment., • Diagnoses malfunctioning apparatus such as transformers, motors and lighting fixtures and replaces damaged or broken wires and cables., • Tests malfunctioning machinery and discusses malfunction with other appropriate personnel to diagnose malfunction., • Replaces faulty electrical components such as relays, switches, motors, and sensors., • Replaces PLC's., • Plans layout of wiring and installs wiring, conduit, and electrical devices in manufacturing equipment., • Strictly adhere to safety regulations and plant policies., • Perform highly diversified duties to install and maintain production machines and the plant facility's tools and equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, repair or replace parts, test and make adjustments., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • High School Diploma or GED equivalent, • Minimum +1 years of experience troubleshooting and repairing production and/or manufacturing equipment, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position, • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items Preferred Knowledge & Skills • +3 years of experience with diagnosing, repairing, and troubleshooting electrical systems for production equipment, • Experience maintaining machinery such as CNC Machines, machine washers, salt lines, and etc., • Familiarity with Davenport, Traub, Sasspi and/or Waterbury machines, • Experience working with PLC (Siemens, Allen Bradley, etc.), • Knowledge of or experience in working with Screw Machines, Drillers, Tappers, and other manufacturing equipment, as well as troubleshooting the above-mentioned machines., • Detail oriented and has the ability to follow both oral and written directions, ability to work unsupervised, • Demonstrable knowledge and/or understanding of codes, rules, regulations and standards of electrical equipment, • Ability to read and interpret electrical, hydraulic and pneumatic schematics and drawings, • Familiar with commercial building codes Additional Requirements • Must be able to work on site in Carson, California, • Must be able to work on the 1st shift and overtime and/or weekends as needed, • 1st Shift: 4 AM - 2 PM, • Able to lift 15-30lbs. Unassisted and repetitively, • Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position, • Benefits/Salary:, • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The pay range for this position is $22-$29/hr.

GROW WITH US: Tandem Diabetes Care creates new possibilities for people living with diabetes, their loved ones, and their healthcare providers through a positively different experience. We'd love for you to team up with us to "innovate every day," put "people first," and take the "no-shortcuts" approach that has propelled us to become a leader in the diabetes technology industry. STAY AWESOME: Tandem Diabetes Care is proud to manufacture and sell the Tandem Mobi system and t:slim X2 insulin pump with Control-IQ+ technology - an advanced predictive algorithm that automates insulin delivery. But we're so much more than that. Our company's human-centered approach to design, development, and support delivers innovative products and services for people who use insulin. Because many of our own team members live with diabetes, or have a loved one impacted by diabetes, the work is personal, and we are committed to the cause. Learn more at ___ A DAY IN THE LIFE: Performs functions associated with all manufacturing operations. Works with engineers in set-up and development of support processes. Assists in the development and execution of protocols and test runs. Design, implement and maintain production support processes. Assess manufacturing processes for compliance with written policies and procedures including QSR's and cGMP practices. Assembles and initiates documentation change order packages. Proactively communicates notifications on problems and issues. Manufacturing Engineering Technician II's at Tandem are also responsible for: • Maintains, operates and develops processes in support of manufacturing operations., • Performs assessments of procedures within the manufacturing environment, identifying non-conformances, recommending and implementing corrective and preventative actions., • Performs all manufacturing assignments in accordance with established safety procedures and applicable regulatory requirements., • Contributes to and develops equipment operating procedures (EOPs) and preventative maintenance (PMs) plans as requested., • Develops and releases written and picture-based work instructions., • Participates in continual process improvement activities designed to optimize quality, compliance, process efficiency, and lead times., • Executes process validation and qualification protocols and documents results and findings as required., • Provides training, as required, to production personnel on procedure, and process changes., • Assists in the implementation Lean Manufacturing and 6 sigma techniques., • Other duties as assigned. WHEN & WHERE YOU'LL WORK: Onsite: This position is fully onsite and open to candidates located in San Diego, California. Equipment for the role will be provided and training will occur onsite. Schedule: This position will work Monday - Thursday from 2:30 PM - 1:45 AM PST. WHAT YOU'LL NEED: 1. Knowledge, skills & abilities: • Knowledgeable with QSRs., • Must have strong cGMP documentation skills., • Working knowledge of small scale electromechanical device assembly operation,, • Ability to effectively share information regarding issues in written or verbal form and making recommendations in a clear and concise manner., • Skilled at promoting team cooperation and a commitment to team success., • Demonstrated ability to effectively prioritize and handle multiple priorities and complete assignments on time and with minimal errors., • Proficient with Microsoft Office and Internet. 2. Minimum certifications/educational level: • Associate degree in a technical discipline, or applicable job experience and education. 3. Minimum experience: • 4+ years of experience in Instrumentation or Biomedical Industries, or Consumer Electronics., • Experience in FDA/GMP/ISO environment., • Lean Manufacturing experience desirable. COMPENSATION: The starting base pay range for this position is $25.19 to $31.47 per hour. Base pay will vary based on job-related knowledge, skills, experience and may also fluctuate depending on candidate's location and the overall job market. Please note that is a temporary position. As a temporary employee you will be employed through a staff agency partner. Benefits during your temporary assignment may be provided by the staffing agency. Access to Tandem sponsored benefits is contingent upon conversion from temporary to regular full-time status. Conversion is determined based upon business need and job performance. YOU SHOULD KNOW: Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable state and local Fair Chance laws and regulations. A conditional offer of employment from Tandem is contingent upon successful completion of a pre-employment screening process comprised of a drug test (excluding marijuana) and background check, which includes a review of criminal history information. Tandem has good cause to conduct a review of criminal history information of candidates for this position, as this role may involve access to proprietary, sensitive and/or confidential information, including customer protected health information. This review is required to ensure that individuals in such roles uphold high standards of trust and integrity so as to protect the interests of our customers, employees, and stakeholders. SPONSORSHIP: Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time WHY YOU'LL LOVE WORKING HERE: At Tandem, we believe joy fuels excellence. That's why we've built a workplace that celebrates your achievements and supports your well-being. Our team thrives on pushing boundaries and fostering growth, all while maintaining a spirit of fun and camaraderie. This is just one of the ways we stay awesome! Explore the benefits and reasons to love Tandem at ___. BE YOU, WITH US! We embrace the value that every single one of us brings to the table. But sometimes we forget that when we don't meet 100% of a job description's criteria - maybe you're feeling that way right now? We encourage you to apply anyway. Because we want you to be you, with us. Tandem is firmly committed to being an equal opportunity employer and does not discriminate on the basis of age, disability, sex, race, religion or belief, gender identity or expression, marriage/civil partnership, pregnancy/maternity, or sexual orientation. We are an inclusive organization, and we welcome applications from a wide range of candidates. Selection for roles will be based on individual merit alone. REFERRALS: We love a good referral! If you know someone who would be a great fit for this position, please share! APPLICATION DEADLINE: The position will be posted until a final candidate is selected for the requisition or the requisition has a sufficient number of applications. Make a move that matters. Join Tandem Diabetes Care, where we're turning challenges into triumphs every day and where your talents will help shape a healthier, happier tomorrow. #LI-HJ1

Location(s): Compton, CA, US, 90222 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68483 Job Title: Instrumentation Technician Department: Compton Maintenance Department PURPOSE OF THE JOB Instrumentation Technician coordinates and executes maintenance electrical functions safely in the facility to ensure that plant equipment and services perform at maximum levels while minimizing unscheduled interruption of the plant operation. Additionally, this individual is also responsible for training, coaching, teaching and counseling otherson electrical maintenance procedures and best practices. Strong skills in planning, organizing, knowledge of programmable logic controllers, electrical systems, and process control systems is required. This position reports to the plant Maintenance Supervisor. The base salary for this position is $56.74/hourly. We also offer a substantial benefits package including insurance (medical/dental/vision/life/disability/supplemental offerings), 401k (company contribution regardless of employee participation - plus match), paid time off (vacation, standard holidays), Employee Assistance Services, Stock Purchase Program - and more. JOB RESPONSIBILITIES Safety • Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Follows the plant safety process and ensures that good safety habits are instilled in the maintenance team., • Maintains an awareness of all safety issues within area of responsibility, and responds with appropriate urgency to correct safety issues identified., • Designs program safety into the electrical systems., • Partners with key stakeholders on capital projects to understand and educate others on the safety of equipment, • Ensures operation of machinery and electrical equipment by completing preventive maintenance requirements on drives, backup power systems, motors, pneumatic tools, conveyor systems, and other electrical related systems; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications, • Maintains electrical control software in support of programming for the facility, • Programs HMIs, PLCs, Servos, and other electrical systems, • Makes timely and appropriate decisions when an emergency or breakdown occurs so that production interruption is minimized, • For equipment or processes where maintenance costs are high, where reliability is low, or where chronic problems exist, performs additional analysis to identify appropriate maintenance practices (e.g., Root Cause Failure Analysis, Failure Modes and Effects Analysis, Reliability-centered maintenance analysis)., • Diagnoses electrical problems and determines how to correct them, checking schematics, repair manuals, and parts catalogs as necessary, • Uses PLC, computer interfaces for troubleshooting as needed, • Uses the manufacturing communications network effectively, • Proactively makes suggestions/proposals to strive for continuous improvement of plant performance., • Demonstrates flexibility to perform various job roles within the maintenance department as assigned., • Responds to emergency maintenance service requests accordingly, • Instructs maintenance team members on proper electrical installation and repair techniques as appropriate, • Coordinates contract electrical installations or repairs in the facility, • Inspects electrical work in progress to ensure correct labor utilization and evaluate electrical training requirements, • Provides direction for downtime and shop work for electrical activities with respect to work requests, downtime lists and assigned projects, • Trains, coaches, and counsels otherson electrical maintenance procedures, required trainings and best practices, • Recommends to the Maintenance Leader training and development of others in support of plant electrical power and control equipment, • Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing professional and intercompany networks, • Accountable for keeping the Maintenance Leader appraised of electrical equipment conditions so that situations of major significance can be planned for to avoid major production downtime, • Prepares electrical maintenance reports by collecting, analyzing, and summarizing information and trends, • Coordinates and executes maintenance electrical functions in the facility so the plant equipment and services perform at maximum levels and minimize unscheduled interruption of the plant operation, • Provides technical information to support planned electrical preventive maintenance to minimize production downtime, • Tracks electrical maintenance costs and failures, • Specifies electricalparts, supplies, and equipment from catalogs and suppliers, or obtains them from storerooms, • Defines electrical spare parts needs, such that inventories are maintained at appropriate levels, • Plans and lays out repair work, using diagrams, drawings, maintenance manuals, and schematic diagrams, • For planned new equipment purchases and installations where no maintenance history exists, applies maintenance and repair "best practices" to assure maximum reliability, • Designs and installs electrical and process control systems, • Proactively assesses and identifies obsolete parts on critical equipment and identifies optimal solutions to correct issues. JOB REQUIREMENTS EDUCATION AND EXPERIENCE • Two year Associates degree in technical related field preferred; Associates degree in electrical technology is a plus, • 3 years or more of relevant industrial electrical maintenance experience preferred, • Must be 18 years or older, • Must be a US citizen or have the right to work in the US, • Must be drug and alcohol free KNOWLEDGE, SKILLS & ABILITIES • Must read, write, and speak English, • Must understand verbal and written instructions, • Must possess strong communication and organizational skills, • Must multi-task, • Must have strong internal and external customer service skills, • Must secure and maintain job related qualifications and certifications as required by the nature of this position, • Programmable Logic Controllers: PLC components, I/O Systems, instructions, PLC programming, communication protocols, drivers, power supplies, expansion/retrofits, and system development (Allen Bradley Suite preferred), • Electrical Systems: servos, variable frequency drives, measuring systems, DC circuits, batteries, transformers, AC circuits, DC equipment/controls, three-phase systems, wiring, DC shunt motors, control relays, across-the-line starters, limit switches, electronic switching and electrical energy and power relationships, • Process Control Systems: speed and rotation sensors, human machine interfaces, control loop operations, data transmission, PID controller/loop tuning, final control elements, process modeling, instrumentation, measurement level detectors, and transducers, • Electrical Maintenance: voltmeters, ammeters, wattmeters, digital meters; schematics and symbols; short circuits, reversible motors, current probes, and relays, • Safety: First aid for shock victims, National Electrical Code, static electricity, grounding, double-insulated tools, National Fire Protection Association (NFPA) - 70e, and hazardous electrical locations, • Electronics: Analog and digital devices, • Mechanical Systems: Pneumatic control systems, air-piloted valves, and hydraulics Skills: • Troubleshooting/Equipment Selection: Determine causes of operating errors and determine appropriate course of action, • Complex Problem Solving: Identify complex problems and reviewing related information to develop and evaluate options and implement solutions, • Systems Analysis: Determine how a system should work and how changes in conditions, operations, and the environment will affect outcomes, • Installation: Install equipment, machines, wiring, or programs to meet specifications, • Equipment Maintenance: Performing routine and preventative maintenance on equipment, • Decision Making:Gather, analyze and interpret information to understand problems and identifyand opportunities; draw conclusions and generates alternatives; chooses a course of action based on facts; and ensures buy-in and understanding of the resulting decisions, • Self-Knowledge: Demonstrate a strong self-awareness of one's strengths, development needs and the impact of one's own behavior on others; and consistently takes action to be better, • Teamwork: Work effectively and cooperatively with others; establishes and maintains good working relationships, • Persistence: Persistence in dealing with obstacles, • Stress Tolerance: Accepting criticism and dealing calmly and effectively with high stress situations, • Independence:Guiding oneself with little or no supervision, and depending on oneself to get things done, • Mathematical Reasoning: To choose the right mathematical methods or formulas to solve a problem, • Adaptability: Being open to change and to considerable variety in the workplace ADDITIONAL REQUIRED TRAINING • All annual safety and role specific training, as required by the nature of this position ESSENTIAL PHYSICAL REQUIREMENTS • Stand for extended, prolonged periods, • Work overtime as needed, • Meet the physical demands of the work environment This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Background Check:Owens Corning is a Fair Chance employer and will consider all qualified applicants, including those with criminal histories. Except as otherwise permissible under applicable laws, you will not be asked to provide information about a conviction history unless you receive a conditional offer of employment. We will make a written individualized assessment of whether your conviction history has a direct or adverse relationship with the specific duties of the job, and will also consider potential mitigating factors, including, but not limited to, evidence and extent of rehabilitation, recency of the offense(s), and age at the time of the offense(s). If asked to provide information about a conviction history, any convictions or court records which are exempted by a valid court order do not have to be disclosed. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18. Nearest Major Market: Los Angeles

Job Description Emerald Technologies is excited to welcome a Maintenance Technician to our Brea, CA team! In this role, you’ll play a critical part in keeping our PCBA manufacturing operations running safely, efficiently, and reliably. You’ll service and maintain SMT equipment, troubleshoot facility and production machinery, perform preventative maintenance, and ensure compliance with safety and HAZMAT handling standards. Your work directly supports the quality and performance of the products we build for high‑reliability industries. At Emerald Technologies, every employee contributes to creating innovative products that power aerospace, medical, industrial, and other mission‑critical markets. Join a supportive, hands‑on team environment where your technical expertise makes a real impact and your career can grow without limits. Responsibilities of the Maintenance Technician: • Perform preventative maintenance, troubleshooting, and repairs on SMT machines and PCB assembly equipment to ensure optimal performance., • Diagnose and repair mechanical, electrical, and facility‑related issues across production and building systems., • Assist with the installation, setup, calibration, and integration of new SMT and manufacturing equipment., • Conduct routine inspections and maintain preventative maintenance schedules for equipment and facility systems., • Perform basic facility maintenance, including electrical, plumbing, and general building repairs., • Safely handle, label, store, and dispose of HAZMAT waste in compliance with OSHA, EPA, and local regulations., • Collaborate with production, engineering, and external vendors to resolve equipment issues and support continuous improvement efforts. Benefits of the Job: • Competitive medical, dental, and vision benefits, • Health Savings Account/Flexible Spending Account, • 401K and company matching with no vesting period, • PTO for rest and relaxation, • Gym reimbursement (through Anthem), • Employee Assistance Program, • A safe and inclusive work environment with team and management support, • Employee training and development, • Community service and philanthropic initiatives, • Employee appreciation and events, • Career advancement opportunities, • Employee Referral program, • Employee discounts Qualifications of the Maintenance Technician: • High School Diploma or equivalent required; technical certificate or degree in a related field preferred., • Experience servicing SMT machines or electronics manufacturing equipment (strongly preferred)., • Hands‑on experience with facility maintenance, including mechanical, electrical, and basic plumbing repairs., • Knowledge of OSHA/EPA safety regulations and proper handling of hazardous materials (HAZMAT)., • Strong troubleshooting, problem‑solving, and diagnostic skills across equipment and facility systems., • Ability to read and interpret maintenance procedures, equipment manuals, and safety documentation., • Physical ability to perform hands‑on maintenance tasks, including lifting, standing, kneeling, and working with tools and equipment. Emerald Technologies is an electronics manufacturing services (EMS) provider for original equipment manufacturer (OEM) customers, focusing on high-reliability electronic assemblies. With design and manufacturing facilities in California, Michigan, New Hampshire, Oregon as well as in China and Malaysia. Emerald Technologies specializes in high mix, low- to medium-volume manufacturing for high-reliability markets in the Aerospace/Defense, Life Sciences, Renewable Energy, Industrial Controls, Power & Infrastructure, Semiconductor and Telecommunications sectors. However, our rapid turnaround times, responsive customer service, and collaborative problem-solving approach distinguishes us from the competition. At Emerald Technologies, we are committed to fully understanding and meeting the needs of our customers through quality excellence, advanced engineering, and a solid commitment to customer relationships. Emerald Technologies, is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Schedule & Budgeted Hours Mid Shift: Shift Hours: Monday–Friday, 11:00 AM – 7:30 PM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break) PM Shift: Shift Hours: Monday–Friday, 3:30 PM – 12:00 AM Paid Hours Per Day: 8 hours (includes one 30‑minute unpaid meal break) Overtime: May be required based on production needs and will be compensated in accordance with California labor law. Budgeted Hours Budgeted Weekly Hours: 40 hours (5 shifts × 8 hours). Overtime: May be required based on production needs and will be compensated in accordance with California labor law.

Job DescriptionDescription: Who We Are Advanced Cooling Technologies, Inc. (ACT) is a leading provider of thermal management solutions and engineered structures serving Defense, Aerospace, HVAC, Power Electronics, and Medical markets. Recognized as a “Best Place to Work,” ACT supports customers including Lockheed Martin, Northrop Grumman, Boeing, NASA, DOD, and DOE. Job Summary The Lead Composite Assembly Technician is responsible for assembling, bonding, and finishing composite parts and subassemblies in accordance with engineering drawings, work instructions, and quality standards. In addition to hands-on post-cure operations—including bonding, hardware installation, and final assembly—this role provides daily leadership to assigned technicians to ensure safe, efficient, and high-quality production while supporting workflow coordination, training, and continuous improvement. Key Responsibilities Technical • Assemble, bond, and finish composite parts and subassemblies, • Perform secondary bonding, hardware installation, drilling, trimming, and sanding, • Prepare bonding surfaces and mix/apply structural adhesives per specifications, • Align, fit, and inspect parts to meet dimensional and tolerance requirements, • Follow assembly drawings, travelers, and work instructions, • Complete required manufacturing and quality documentation, • Support rework, repair, and continuous improvement activities, • Provide daily direction and task assignments to composite assembly personnel, • Serve as the primary technical resource for troubleshooting bonding and assembly issues, • Train and mentor technicians on proper techniques, safety practices, and quality standards, • Monitor workflow to ensure schedule adherence and efficiency, • Coordinate with production supervisors, engineering, and quality to resolve issues, • Promote a safe, organized, and compliant work environment, • Provide input on performance feedback and serve as acting supervisor when requiredRequirements:, • Ability to read and interpret engineering and assembly drawings, • Familiarity with hand tools, measuring equipment, and bonding tools, • Understanding of adhesive bonding and surface preparation techniques preferred, • Strong mechanical aptitude and attention to detail, • Ability to work safely with chemicals and adhesives, • Effective communication and leadership skills, • Strong organizational and problem-solving abilities Education and Experience • High school diploma or equivalent required, • Prior experience in composite assembly, aerospace manufacturing, or mechanical assembly preferred, • On-the-job training may be provided for entry-level candidates ACT offers competitive pay, excellent benefits (medical, dental, vision, paid time off, holidays, company-paid life & disability insurance, 401(k) match, and profit-sharing), and a supportive team environment. ACT is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected characteristic. ACT participates in E-Verify. California Applicants: ACT collects personal information for hiring purposes. California residents may have rights under the CCPA/CPRA. Contact HR at .

Job DescriptionDescription: ACT pioneers innovative heat transfer technologies that shape the future of electronics, aerospace, medical, military capabilities, and renewable energy. With a commitment to innovation, Advanced Cooling Technologies, Inc. (ACT) provides a dynamic environment where your expertise can flourish, driving technological advancement and global impact with locations in Lancaster and York, Pennsylvania, and Anaheim, California. Position Summary: Advanced Cooling Technologies, Inc. (ACT) is looking for a Lead Maintenance Technician to support our Anaheim, CA composite manufacturing facility. This role combines hands-on maintenance work with planning and coordination responsibilities. The Lead Maintenance Technician is responsible for maintaining the building and manufacturing equipment, developing and carrying out preventive maintenance schedules, and coordinating repairs with outside service providers when needed. This position also includes responsibility for hazardous waste handling and disposal and may involve providing day-to-day guidance to another maintenance technician. Requirements: Building Maintenance • Handle basic building repairs such as lighting, plumbing, ventilation, and general upkeep., • Call and work with outside repair companies when needed., • Perform basic maintenance and small repairs on equipment such as:, • Autoclaves, presses, air compressors, vacuum pumps, and other machine shop equipment., • Contact external repairpersons as needed for larger repairs, • Set up regular maintenance schedules for equipment and building systems., • Perform scheduled maintenance tasks., • Keep records of work that has been done., • Collect, label, store, and arrange disposal of hazardous waste according to company procedures and safety rules., • Keep required records related to hazardous waste handling and disposal., • Help direct the work of other assigned maintenance personnel, • Decide what maintenance work should be done first., • Work with supervisors and production staff to avoid disrupting operations., • High school diploma or GED., • 3- 5 years of maintenance experience in a factory, shop, or industrial setting., • Ability to plan maintenance work and keep basic records., • Comfortable using basic computer programs (email, simple tracking)., • Able to lift materials, use tools, and work safely around machinery., • Good communication skills are required., • Good organizational skills a plus, • Computer competencies (Outlook, Word, Excel) required., • Ability to work at elevated heights, must be able to lift, carry, push, and pull 25-50 pounds frequently and up to 50 pounds occasionally, • Must be self-driven and willing to step up to ensure company expectations are met, • Comfortable working on ladders or at heights when needed., • Valid driver’s license., • Previous lead or supervisor experience., • Experience in machine shop/composite facilities., • Electrical, mechanical, HVAC, pneumatic, or hydraulic experience., • Experience handling hazardous materials or waste., • Forklift or manlift experience. ACT offers competitive pay, excellent benefits (medical, dental, vision, paid time off, holidays, company-paid life & disability insurance, 401(k) match, and profit-sharing), and a supportive team environment. ACT is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected characteristic. ACT participates in E-Verify. California Applicants: ACT collects personal information for hiring purposes. California residents may have rights under the CCPA/CPRA. Contact HR at .

Job Description Classification: Non-Exempt Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. $37.00 - $41.00 per hour depending on experience. Los Angeles City Boiler Operator License required Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred., • Some locations may require relevant certifications, a boiler license or PLC programming. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. Our full-time employees may enjoy: • 401 K Plan with Company Match, • Medical, Dental, Vision, and FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Employee Assistance Program (EAP), • Career Advancement, • Development Opportunities For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. About Us: We are Alsco Uniforms. We've been committed to our customers since 1889, proudly pioneering the uniform and linen rental industry and growing into a global leader serving over 350,000 customers across 13 countries. We provide exceptional service and create solutions that strengthen our customers' operations. At Alsco, our diverse workforce drives performance, innovation, and exceptional service. We're looking for individuals who want to build a rewarding career while making a meaningful impact. Explore how Alsco helps you build a successful career with competitive compensation, benefits, and ongoing opportunities for growth. Join our team and build your career with Alsco Uniforms! Alsco Uniforms is an Equal Employment Opportunity Employer Alsco Uniforms considers candidates for employment without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, or gender identity. Additionally, we do not discriminate based on genetic information, military status, protected veteran status, or other classification protected by applicable federal, state, or local law. Specifically, protected veteran status includes status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active-duty wartime or campaign badge veteran. Thank You for Considering Alsco Uniforms Thank you for your interest in joining Alsco Uniforms. Employment is contingent upon successful completion of background and safety sensitive drug screening. Revised: 04/29/2022

The PLC Controls Specialist is responsible for designing, programming, repairing, & maintaining manufacturing and packaging control systems and equipment used within Altium Packaging. This position requires strong mechanical & electrical skills in areas such as hydraulics, pneumatics, packaging equipment, material transfers, blow molders and PLC systems. The technician will inspect equipment for proper operation and perform preventative maintenance duties per manufacturer's specifications. Troubleshoot equipment malfunctions and make repairs or adjustments as needed. Most job duties and responsibilities require continuous work near heat, noise, hydraulic, gas, and melted plastic. Hiring Requirements Job Details • Designing, programming, repairing and troubleshooting control systems, often working with PLC's and HMI systems., • Perform preventative maintenance on PLC systems., • Download & save programs for all PLC systems on every line to back them up., • Upgrade production lines with new equipment and technology., • Install and test new manufacturing, packaging and processing equipment. Interface with machine tools and special equipment or test modules, troubleshoot existing equipment for electrical or electronics failures and change or modify machines to improve or update them., • Work with IT and equipment manufacturers to troubleshoot and repair control systems., • Inspect, repair, install, modify, and maintain electrical/electronic systems, control circuits and other production equipment., • Responsible for developing user interfaces and ensuring systems meet safety and efficiency standards., • Troubleshoot and repair pneumatic, hydraulic, mechanical systems, blow molders, packaging equipment, resin transferring systems and support equipment., • Work with production to make rapid, educated decisions regarding the issue at hand., • Ensure safety of electrical networks and cables., • Participate and direct troubleshooting activities in the event of equipment failure including participation in failure analysis, problem solving and prevention., • Support repairs and installations for advanced production/manufacturing equipment., • Maintain machines in optimal processing conditions., • Perform mold, pin and other mechanical changes., • Execute preventative maintenance and repairs when required in addition to planned mechanical maintenance duties., • Participate in continuous improvement culture while following safe workplace practices., • Develop positive and respectful interactions with managers, supervisors, maintenance technicians, and machine operators., • Perform welding and fabrication as needed., • Perform other duties as required by supervisor/manager., • Mentor and provide support to less experienced technicians., • Enforce GMP, safety, & audit standards., • Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies. • Five (5) plus years of experience in industrial manufacturing controls & automation maintenance required., • Experience with PLCs/VFDs replacement and configuration., • Electrical/electronic troubleshooting and repair skills required., • Experience with basic electrical systems (e.g., starters, fuses, contacts, relays)., • Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.)., • Experience with product manuals (e.g., reading and applying knowledge to make repairs)., • Experience with schematics (e.g., electrical blueprints with switches, starters, maps, relays)., • Experience with troubleshooting (e.g., diagnostics, problem solving, etc.). Position-Specific Skills: • Requires strong Automation, Electrical, and diagnostics skills along with Network and Computer hardware fundamentals knowledge., • Must be able to use RS Logix 5000, RS Logix 500, RS Logix 5, or similar software for machine troubleshooting., • Basic mathematical skills are required., • Must be able to download and/ or modify PLC programs if necessary., • Must be able to use a multimeter and work in control panels with up to 480VAC., • Understands symbols on P&ID’s and tag references online layout drawing., • Should be able to replace Panelview series HMI’s and download application using the proper programs & tools., • Excellent communication skills., • OSHA forklift certification., • Aptitude for further development of technical skills.

Description The National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Telecommunications Engineering Technician to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in El Segundo, CA. The ideal candidate will support the daily operations of the Telecommunications System. This new system will replace outdated infrastructure including radar, software, hardware and telecommunications networks to manage modern travel. Telecommunications Engineering Technician Job Duties Include: • Review FAA databases and provide input and or draft Site Survey Reports (SSR)., • Conduct site surveys to provide input and/or draft Site Survey Reports., • Coordinate schedules with SSC, ES, and vendor personnel., • Draft Project Risk Plans (PRP) and Operational Risk Management Plans (ORMP)., • Generate and/or update drawings, sketches, and artifacts., • Draft project plans for site preparation activities., • Coordinate scheduled outages with SSC, Air Traffic and Operations personnel., • Develop transition plans., • Resolve schedule conflicts., • Accompany unbadged personnel at facilities., • Work with LECs on schedules., • Develop briefings/information/reports on District status., • Work with other Districts/SSC on interstate service flows, transitions, cutovers, planning, etc., • Support District POC and SSCs with day-to-day work activities., • Review and provide comments on vendor Site Specific Implementation Plans (SSIP). Telecommunications Engineering Technician Required Qualifications: • Bachelor’s degree in Electronics Engineering and 4 to 8 years of relevant experience OR a Master's degree and 2 to 6 years. Additional experience may be substituted/considered/accepted in lieu of degree., • Ability to travel 75-100%., • Ability to obtain a Public Trust Security Clearance Suitability (To be eligible for Public Trust Security Clearance, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years of the past 5 years consecutively with no breaks)., • Proficiency in MS Office Suites. Desired Qualifications: • 2+ years of experience working with Telco systems performing Network Troubleshooting., • Proficient working with AutoCAD or similar tools., • Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment Tower., • Knowledge of OSHA and general construction and electrical safety standards., • Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG. Leidos is a Fortune 500™ company aimed at embracing and solving some of the world’s most pressing challenges through science and technology. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job DescriptionOrange County, CA General Laborer/Plumbing Apprentice Founded over 40 years ago, American Leak Detection is the world leader in the accurate, non-destructive detection of hidden water, sewer, gas and swimming pool leaks. American Leak Detection sets the standard for non-invasive leak detection and repair using proprietary methods and the most advanced, sophisticated technology. Our customers include residential homeowners and industry professionals like plumbers, building contractors, insurance adjusters, apartment managers, drain cleaners, restoration specialists, HOA’s, and municipalities. American Leak Detection is looking for a highly motivated, independent worker to join our team as a General Laborer. Great candidates will be mechanically inclined, comfortable with learning and using new technology, and also be ready to work outside in all weather conditions. This position requires intermittent, often heavy, physical labor. We provide paid training, all the tools needed to perform your job duties, and also a company vehicle for business use. * Plumbing related repairs for: * Suction lines * Return lines * Jet lines * Skimmers * Light concrete work Required Qualifications: * Valid California Driver’s License * Clean driving record * Must be able to pass a criminal background check and drug screening * Ability to move/lift up to 100 pounds * Must be able to swim * Experience using power tools * Excellent communication skills, both written and verbal * Ability to work independently * Neat, professional appearance * Must be able to meet physical labor requirements Preferred Qualifications: * Familiarity with leak detection or pool plumbing system, pumps, pop-up cleaning systems * Mechanical/electronics background * Willing to train motivated candidate Education Level: High School or equivalent Wage: $16-$18 negotiable with experience. Opportunity to become a technician and be paid considerably more. Benefits: Paid vacation, paid holidays, 401K matching, paid training, Health insurance Start a career today with American Leak Detection!

Job Description Position Summary Maintenance technician is a customer support position, focusing on the needs of the organization. Repair and preventative maintenance of a variety of machinery, tools, equipment used in all of our facilities. Duties will also include but are not limited to … routine maintenance and repair of facilities and grounds. A strong attention to detail and the ability to work autonomously for long periods of time. This position requires a high sense of urgency with a focus on safety. Essential Duties and Responsibilities • Good communication and computer skills, document repair work, write reports, create documents, • Ability to work in & with diverse teams both internally & externally, • Flexible to work various hours & schedules, pending business needs and urgency, • Safety first mentality, highest of quality standards, self-starter and results driven, • Positive mindset, proactive thinking, address issues & implement solutions quickly, • Repair / replace defective equipment using hand tools, power tools, & assemble equipment, • Perform routine preventive maintenance ensuring machines continue to run smoothly, operate efficiently, and the physical condition does not deteriorate, • Diagnose mechanical & electrical problems … determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary, • Assemble, install and/or repair wiring, electrical and electronic components, pipe systems and plumbing, machinery, and equipment, • Train, and where needed lead others in department to ensure departmental objectives are met To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: • 7+ years of hands on repair of electrical and mechanical systems on machinery, • Experienced with hydraulic systems – repair and maintenance, • Experienced with mechanical machine alignment checks and adjustments, • Education / training in electronics and electrical systems desirable, • Forklift license Knowledge • Strong troubleshooting skills with electrical and mechanical metal cutting equipment, • Strong troubleshooting skills with electrical and mechanical metal cutting equipment

Quality Control Technician Broadata Communications, Inc. (BCI) - Torrance, CA On-site Company Overview Broadata Communications, Inc. (BCI) is a privately held California-based corporation and a leader in developing innovative, market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients include world leaders in industries spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. Job Summary We are seeking a talented and motivated Quality Control Technician focused on Video & Audio systems. This hands-on role is critical in ensuring the quality and reliability of our Pro AV products, directly contributing to our reputation for excellence. The QC Technician will work closely with the Engineering and Production Departments to verify product integrity and ensure adherence to specifications before release and shipment. A key responsibility of this role is the inspection of incoming raw materials using industry-standard tools. We offer a dynamic and stimulating work environment with opportunities for professional growth and development within BCI. This is a hands-on position. This is NOT a remote or hybrid position. Key Responsibilities\n • Take ownership of incoming inspection activities, ensuring raw materials and components meet company and customer specifications.\n, • Implement and execute AQL-based incoming inspection processes.\n, • Perform inspection of AV hardware, electronic assemblies, mechanical components, and cable assemblies.\n, • Verify dimensional requirements, labeling accuracy, configuration control, workmanship, and packaging.\n, • Identify, document, and process nonconforming material within the Quality Management System (QMS) or ERP system.\n, • Perform failure analysis and assist in structured root cause investigations.\n, • Conduct First Article Inspection (FAI) and support Production Part Approval Process (PPAP) activities as required.\n, • Assist in resolving internal and customer quality issues through technical evaluation and documentation.\n, • Develop and update inspection instructions, procedures, and technical documentation.\n, • Collaborate with Engineering to address hardware concerns and recommend corrective or preventive actions.\n, • Support continuous improvement efforts within manufacturing and quality processes.\n, • Other responsibilities as assigned.\n\nEducation & Experience\n, • High School Diploma or GED required.\n, • Associates degree preferred.\n, • 4-6+ years of hands-on experience in quality control within electronics, AV hardware, or similar manufacturing environments.\n, • Strong understanding of electronic, mechanical, and cable assemblies.\n, • Experience with soldering and rework per IPC-A-610 and/or IPC-A-620 standards (certification preferred).\n, • Proficient with precision measuring instruments such as calipers, micrometers, vision measurement systems (VMS), and related inspection tools.\n, • Ability to read and interpret electrical schematics, BOMs, and mechanical drawings.\n, • Experience documenting inspections and nonconformances within QMS or ERP systems.\n, • Familiarity with ISO 9001 environments required; ISO 13485 experience is a plus.\n, • Exposure to Lean/5S or structured problem-solving methods preferred.\n, • Degree in Engineering or related technical field is beneficial but not required.\n\nSkills & Abilities\n, • Strong organizational skills, attention to detail, problem solving, and analytical abilities.\n, • Ability to manage multiple projects and tasks simultaneously while adhering to strict deadlines.\n, • Highly responsible, self-motivated, and able to thrive in an energetic, fast pace, high growth, entrepreneurial environment.\n, • Strong team player who can build strong relationships at all levels of the organization.\n, • Ability to work independently, prioritize tasks, meet aggressive deadlines, and work extended hours, as needed.\n, • Proficient in using lab equipment and tools relevant to AV product testing.\n, • Demonstrated commitment to personal career growth and a willingness to self-learn and work in new technology domains. \n, • Detail-oriented team player with excellent documentation and communication skills.\n\nBenefits\n, • Medical, vision and dental insurance\n, • 401(k) with company match (100% of the first 4% in eligible compensation)\n, • Flexible Spending Account \n, • 2 weeks paid vacation\n, • 1 Week sick pay\n, • 10 company holidays\n, • Group life insurance\n\nSalary Range, • Hourly: $32 - $44Pay may vary depending on experience, qualifications, and other job-related factors.

Job Description Magnakom is an R2:2013, ISO 14001:2015, ISO 45001:2018, and ISO 9001:2015 certified company specializing in the lifecycle management of consumer electronics including remarketing, refurbishing, and recycling. We are actively seeking tech-savvy individuals interested in a full-time permanent position in our company. This position has potential for growth, dependent on the skillsets of the applicant. JOB DESCRIPTION: The duties of a Cell Phone Repair Technician are to troubleshoot issues with mobile phones, diagnose the cause of a particular problem, then replace parts or perform software updates to repair the device and restore it to full functionality. • Perform professional-level repairs on iPhones, Samsung, and other Android devices, • Identify broken parts and place orders for replacement parts, • Document part prices for account purposes, • Perform data-entry within inventory management system, • Maintain inventory accuracy and a high level of attention to detail at all times, • Keep a clean and safe workspace and optimize process efficiencies, • Communicate and cooperate with supervisors and coworkers, • Follow quality control standards and comply with procedures, rules and regulations 1. Must have prior personal or professional experience in mobile device repair, 2. Must be able to perform the following repairs: Battery, Screen, Speaker, Charge Port (non-soldering), and other basic repairs, 3. Knowledge in other types of electronics repair is a plus (Consoles, Tablets, Laptops, etc), 4. Interest in tech, mobile devices, and computers, 5. Must be able to pass a basic background check., 6. Must be permitted to work in the US Job Type: Full-time

Job Type Full-time Description Who We Are Advanced Cooling Technologies, Inc. (ACT) is a leading provider of thermal management solutions and engineered structures serving Defense, Aerospace, HVAC, Power Electronics, and Medical markets. Recognized as a "Best Place to Work," ACT supports customers including Lockheed Martin, Northrop Grumman, Boeing, NASA, DOD, and DOE. Job Summary The Lead Composite Assembly Technician is responsible for assembling, bonding, and finishing composite parts and subassemblies in accordance with engineering drawings, work instructions, and quality standards. In addition to hands-on post-cure operations-including bonding, hardware installation, and final assembly-this role provides daily leadership to assigned technicians to ensure safe, efficient, and high-quality production while supporting workflow coordination, training, and continuous improvement. Key Responsibilities Technical \n • Assemble, bond, and finish composite parts and subassemblies\n, • Perform secondary bonding, hardware installation, drilling, trimming, and sanding\n, • Prepare bonding surfaces and mix/apply structural adhesives per specifications\n, • Align, fit, and inspect parts to meet dimensional and tolerance requirements\n, • Follow assembly drawings, travelers, and work instructions\n, • Complete required manufacturing and quality documentation\n, • Support rework, repair, and continuous improvement activities\n, • Provide daily direction and task assignments to composite assembly personnel\n, • Serve as the primary technical resource for troubleshooting bonding and assembly issues\n, • Train and mentor technicians on proper techniques, safety practices, and quality standards\n, • Monitor workflow to ensure schedule adherence and efficiency\n, • Coordinate with production supervisors, engineering, and quality to resolve issues\n, • Promote a safe, organized, and compliant work environment\n, • Provide input on performance feedback and serve as acting supervisor when required\n\n Requirements \n • Ability to read and interpret engineering and assembly drawings\n, • Familiarity with hand tools, measuring equipment, and bonding tools\n, • Understanding of adhesive bonding and surface preparation techniques preferred\n, • Strong mechanical aptitude and attention to detail\n, • Ability to work safely with chemicals and adhesives\n, • Effective communication and leadership skills\n, • High school diploma or equivalent required\n, • Prior experience in composite assembly, aerospace manufacturing, or mechanical assembly preferred\n, • On-the-job training may be provided for entry-level candidates\n\n ACT offers competitive pay, excellent benefits (medical, dental, vision, paid time off, holidays, company-paid life & disability insurance, 401(k) match, and profit-sharing), and a supportive team environment. ACT is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected characteristic. ACT participates in E-Verify. California Applicants: ACT collects personal information for hiring purposes. California residents may have rights under the CCPA/CPRA. Contact HR at [email protected] . Salary Description $27-$35/hour

Company Overview At Motorola Solutions, we believe that everything starts with our people. We're a global close-knit community, united by the relentless pursuit to help keep people safer everywhere. We build and connect technologies to help protect people, property and places. Our solutions foster the collaboration that's critical for safer communities, safer schools, safer hospitals, safer businesses, and ultimately, safer nations. Connect with a career that matters, and help us build a safer future. Department Overview Silvus Technologies was acquired by Motorola Solutions in 2025, and is now part of its ecosystem of safety and security technologies. With deep roots in DARPA research, Silvus Technologies develops world-class advanced communications technologies that are reshaping the tactical communications landscape. From pure line-of-sight to extreme non-line-of-sight, Silvus radios form a self-healing, self-forming mesh network, enabling secure and reliable connectivity, including video and high-bandwidth data. Job Description Silvus Technologies is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons. Silvus StreamCaster™ radios are being rapidly adopted by customers all over the world ranging from the U.S. and Allied Nations Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Superbowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers. Would you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of "Keeping Our Heroes Connected"? Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can be the next chapter of your career. THE OPPORTUNITY Silvus is seeking an entry level Electronics Technician-I for the production team of Silvus' StreamCaster line of MIMO radios. This role will work closely with operations management and engineering to ensure high quality and timely delivery as well as provide feedback for continuous improvement of the product. This is a fully on-site position, Monday through Friday, from 4:00 am to 12:30 pm. The location for this role is Silvus Technologies' HQ in the heart of vibrant West Los Angeles. The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion. ROLE AND RESPONSIBILITIES \n • Testing of sensitive electronic assemblies and printed circuit boards (PCBs).\n, • Final assembly and inspection of finished products.\n, • System testing and quality control testing in production.\n, • Statistics logging and reporting with daily feedback to the team.\n, • Perform other related duties of which the above are representative.\n\n REQUIRED QUALIFICATIONS \n • High School Diploma or GED.\n, • Good manual dexterity and strong hand skills with tools (tweezers, screw/bolt drivers, torque wrenches).\n, • Competent as a PC user, and computer savvy.\n, • Collaborative spirit, committed to team success.\n, • Excellent organizational skills and ability to manage multiple tasks.\n, • Excellent communication skills and teamwork.\n, • Enjoys hands-on work; is careful and detail oriented.\n, • NOTE - Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.\n, • All employment is contingent upon the successful clearance of a background check and drug test.\n\n PREFERRED KNOWLEDGE SKILLS AND ABILITIES \n • Experience in an electronics manufacturing and testing environment.\n, • Linux experience is a plus.\n\n WORKING CONDITIONS AND PHYSICAL REQUIREMENTS \n • Indoor air-conditioned facility.\n, • Occasional exposure to heat and cold.\n, • Lift up to 25 lbs.\n, • Walking/Moving in the labs.\n\n\n\n COMPENSATION: $21.63 - $22.66 / hourly This salary range is NOT guaranteed. It is based on market research and peer data and will vary depending on the candidate's experience and qualifications. Basic Requirements \n • High School Diploma or GED.\n, • Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.\n Our U.S. Benefits include: \n • Incentive Bonus Plans\n, • Medical, Dental, Vision benefits\n, • 401K with Company Match\n, • 10 Paid Holidays\n, • Generous Paid Time Off Packages\n, • Employee Stock Purchase Plan\n, • Paid Parental & Family Leave\n, • and more!\n\n EEO Statement Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic. We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you'd like to join our team but feel that you don't quite meet all of the preferred skills, we'd still love to hear why you think you'd be a great addition to our team. We're committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions. To request an accommodation, please complete this Reasonable Accommodations Form so we can assist you.

Company Overview At Motorola Solutions, we believe that everything starts with our people. We're a global close-knit community, united by the relentless pursuit to help keep people safer everywhere. We build and connect technologies to help protect people, property and places. Our solutions foster the collaboration that's critical for safer communities, safer schools, safer hospitals, safer businesses, and ultimately, safer nations. Connect with a career that matters, and help us build a safer future. Department Overview Silvus Technologies was acquired by Motorola Solutions in 2025, and is now part of its ecosystem of safety and security technologies. With deep roots in DARPA research, Silvus Technologies develops world-class advanced communications technologies that are reshaping the tactical communications landscape. From pure line-of-sight to extreme non-line-of-sight, Silvus radios form a self-healing, self-forming mesh network, enabling secure and reliable connectivity, including video and high-bandwidth data. Job Description Silvus Technologies is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons. Silvus StreamCaster™ radios are being rapidly adopted by customers all over the world ranging from the U.S. and Allied Nations Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Superbowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers. Would you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of "Keeping Our Heroes Connected"? Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can be the next chapter of your career. THE OPPORTUNITY Silvus is seeking an entry level Electronics Technician-I for the production team of Silvus' StreamCaster line of MIMO radios. This role will work closely with operations management and engineering to ensure high quality and timely delivery as well as provide feedback for continuous improvement of the product. This is a fully on-site position, Monday through Friday, from 12:00 pm to 8:30 pm. The location for this role is Silvus Technologies' HQ in the heart of vibrant West Los Angeles. The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion. ROLE AND RESPONSIBILITIES \n • Testing of sensitive electronic assemblies and printed circuit boards (PCBs).\n, • Final assembly and inspection of finished products.\n, • System testing and quality control testing in production.\n, • Statistics logging and reporting with daily feedback to the team.\n, • Perform other related duties of which the above are representative.\n\n REQUIRED QUALIFICATIONS \n • High School Diploma or GED.\n, • Good manual dexterity and strong hand skills with tools (tweezers, screw/bolt drivers, torque wrenches).\n, • Competent as a PC user, and computer savvy.\n, • Collaborative spirit, committed to team success.\n, • Excellent organizational skills and ability to manage multiple tasks.\n, • Excellent communication skills and teamwork.\n, • Enjoys hands-on work; is careful and detail oriented.\n, • NOTE - Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.\n, • All employment is contingent upon the successful clearance of a background check and drug test.\n\n PREFERRED KNOWLEDGE SKILLS AND ABILITIES \n • Experience in an electronics manufacturing and testing environment.\n, • Linux experience is a plus.\n\n WORKING CONDITIONS AND PHYSICAL REQUIREMENTS \n • Indoor air-conditioned facility.\n, • Occasional exposure to heat and cold.\n, • Lift up to 25 lbs.\n, • Walking/Moving in the labs.\n\n\n\n COMPENSATION: $21.63 - $22.66 / hourly This salary range is NOT guaranteed. It is based on market research and peer data and will vary depending on the candidate's experience and qualifications. Basic Requirements \n • High School Diploma or GED.\n, • Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.\n Our U.S. Benefits include: \n • Incentive Bonus Plans\n, • Medical, Dental, Vision benefits\n, • 401K with Company Match\n, • 10 Paid Holidays\n, • Generous Paid Time Off Packages\n, • Employee Stock Purchase Plan\n, • Paid Parental & Family Leave\n, • and more!\n\n EEO Statement Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic. We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you'd like to join our team but feel that you don't quite meet all of the preferred skills, we'd still love to hear why you think you'd be a great addition to our team. We're committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions. To request an accommodation, please complete this Reasonable Accommodations Form so we can assist you.

Job DescriptionNorth OC, CA: Service Repair Technician - seeking someone with 1-2 years, but open to others, someone who went to DeVry, monitor repairs is KEY, electronic based Overall Responsibilities: Diagnose and troubleshoot problems in order to conduct Board and Component level repairs on LCD monitors. These would be in-house as well as on site repairs. Assist on Technical Support matters to Clients as well as to Sales Personnel. Have a good overall understanding of Computers, Computer components and Operating Systems. Detailed Responsibilities: Maintenance of in-house computers and system. Light maintenance of Network System. Repair of defective product sent in for service. Onsite service when assigned. Keeping records of Repairs. Update Database system. Maintenance and Organization of Service Lab, tools and equipment. Keep track of Repair Parts and organize and arrange for the return of defective product to Head Quarters in California or Japan Qualifications: Good communication skills. Certification in Electronics Technology. Understanding of Technology operations. Be able to follow instructions. Technology: Word Processing Software - Microsoft Word Spreadsheet Software - Microsoft Excel Email - Microsoft Outlook Internet Explorer or similar Internet - Helix (Service Department Database) 100% in-office position Salary DOE Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: The pay transparency policy is available here: For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. AppleOne participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #1090 Company DescriptionThis company offers growth and a great group of people to work with.This company offers growth and a great group of people to work with.

Job Description Mobile Creations LLC is looking for mobile electronic installers to support our company's growth. Our company provides installation and repair solutions for numerous clients who use products such as GPS tracking, cameras and various 12-volt devices. As a family-owned business for +30 years, our clients trust that they can count on us for the timeliness and quality of our services. We have immediate positions available for Field Technicians located in Southern Californian and Northern California. Your role as a Field Technician requires the successful installation of these products in both light and heavy-duty vehicles. Applicants should have professional experience installing mobile electronics such as GPS equipment, cameras, etc. This position requires a reliable vehicle, tools, and a smartphone. This role is available to applicants seeking part-time work with the possibility of full-time work in the future. Work will be available 6-7 days a week. Traveling is required as job sites will vary in location. Mileage will be compensated. Compensation: $25 - $35 per hour Knowledge/Skills/Abilities: Prior 12-volt installation experience (tracking systems, camera systems, etc.) is required. Fleet Installation experience is a plus. Ability to work independently (Minimal training provided). Must have basic computer skills (email, data entry, photo taking) Must possess a Valid Driver's License Must be dependable and possess a good work ethic.

Job Description Position Summary The Medical Field Service Technician provides front-line support to clients by performing installation, troubleshooting, maintenance, and repair of medical and dental equipment both remotely and on-site. This role ensures high levels of customer satisfaction by delivering technical solutions aligned with the company’s service standards. The technician is expected to work independently in the field, support equipment training, and contribute to continuous improvement efforts. Key Responsibilities • Serve as the first point of contact for client equipment-related inquiries and service requests, • Install, troubleshoot, configure, inspect, and test medical and dental field equipment at client sites, • Diagnose and resolve technical issues via phone, email, and field visits, • Maintain accurate documentation of service cases, including resolutions and follow-up actions, • Escalate unresolved or critical issues to internal teams with clear documentation, • Provide basic training to clients on equipment operation and maintenance, • Monitor and track service metrics such as resolution time, customer satisfaction, and call quality, • Travel weekly to client job sites (average duration: 2–7 days per assignment), • Handle and transport equipment (up to 50 lbs), ensuring safe handling and setup, • Operate tools and testing devices to verify functionality of repaired units, • Support internal training initiatives and participate in service process improvements, • Perform other duties as assigned by management Required Qualifications • High School Diploma or GED required; Associate degree in IT, electronics, biomedical equipment, or related field preferred, • Valid driver’s license and ability to travel regularly, • Strong mechanical aptitude and 2+ years of field service experience with hardware or devices, • Technical training in medical imaging systems a plus., • Familiarity with diagnostic software and calibration tools used in medical device servicing a plus., • Basic networking knowledge for equipment with integrated software or remote monitoring capabilities, • Customer service training or experience., • Excellent communication and interpersonal skills, • Ability to collaborate with cross-functional teams, including sales and customer support, • Proficiency in Microsoft Office (Word, Excel, Outlook), • Ability to work independently, manage multiple tasks, and adapt to changing priorities, • Must be able to kneel, bend, and stand for extended periods and operate in tight spaces, • Ability to lift up to 50 pounds and push/pull service carts BENEFITS • Medical Insurance up to 100% company-sponsored, • Dental and Vision,100% company-sponsored, • Basic Life Insurance and AD&D, 100% Company sponsored, • Short-Term and Long-Term Disability Insurance, 100% company-sponsored., • 401(k) plan with a company match up to 3%, • Generous Paid Time Off (PTO) & Paid Sick Time Off

Responsibilities About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Howmet Fastening Systems (HFS) is seeking an Machine Maintenance Technician (Electronics) for our Carson, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Primary Purpose The primary function of this position is to maintain, repair, adjust, and modify the facilities machinery and equipment, as well as the building and its grounds, according to a set schedule and in emergency and non-emergency situations. Responsibilities \n • Perform technician skills including but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines. \n, • Connects power supply wires to machines and equipment and connects cables and wires between machines and equipment.\n, • Diagnoses malfunctioning apparatus such as transformers, motors and lighting fixtures and replaces damaged or broken wires and cables.\n, • Tests malfunctioning machinery and discusses malfunction with other appropriate personnel to diagnose malfunction.\n, • Replaces faulty electrical components such as relays, switches, motors, and sensors.\n, • Replaces PLC's.\n, • Plans layout of wiring and installs wiring, conduit, and electrical devices in manufacturing equipment.\n, • Strictly adhere to safety regulations and plant policies.\n, • Perform highly diversified duties to install and maintain production machines and the plant facility's tools and equipment.\n, • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service.\n, • Read and interpret equipment manuals and work orders to perform required maintenance and service.\n, • Diagnose problems, repair or replace parts, test and make adjustments.\n, • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.\n, • Detect faulty operations, defective material and report those and any unusual situations to proper supervision.\n, • Perform all other duties as assigned or needed.\n\n Qualifications Basic Qualifications \n • High School Diploma or GED equivalent\n, • Minimum +1 years of experience troubleshooting and repairing production and/or manufacturing equipment \n, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position\n, • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items\n\n Preferred Knowledge & Skills \n • +3 years of experience with diagnosing, repairing, and troubleshooting electrical systems for production equipment\n, • Experience maintaining machinery such as CNC Machines, machine washers, salt lines, and etc.\n, • Familiarity with Davenport, Traub, Sasspi and/or Waterbury machines\n, • Experience working with PLC (Siemens, Allen Bradley, etc.)\n, • Knowledge of or experience in working with Screw Machines, Drillers, Tappers, and other manufacturing equipment, as well as troubleshooting the above-mentioned machines.\n, • Detail oriented and has the ability to follow both oral and written directions, ability to work unsupervised\n, • Demonstrable knowledge and/or understanding of codes, rules, regulations and standards of electrical equipment\n, • Ability to read and interpret electrical, hydraulic and pneumatic schematics and drawings\n, • Familiar with commercial building codes\n\n Additional Requirements \n • Must be able to work on site in Carson, California\n, • Must be able to work on the 1st shift and overtime and/or weekends as needed, • 1st Shift: 4 AM - 2 PM\n\n, • Able to lift 15-30lbs. Unassisted and repetitively\n, • Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position\n, • Benefits/Salary:\n, • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The pay range for this position is $22-$29/hr.\n\n About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected]

Description The National Airspace Systems Integration Support (NISC) program at Leidos is seeking a Telecommunications Engineering Technician to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in El Segundo, CA. The ideal candidate will support the daily operations of the Telecommunications System. This new system will replace outdated infrastructure including radar, software, hardware and telecommunications networks to manage modern travel. Telecommunications Engineering Technician Job Duties Include: • Review FAA databases and provide input and or draft Site Survey Reports (SSR)., • Conduct site surveys to provide input and/or draft Site Survey Reports., • Coordinate schedules with SSC, ES, and vendor personnel., • Draft Project Risk Plans (PRP) and Operational Risk Management Plans (ORMP)., • Generate and/or update drawings, sketches, and artifacts., • Draft project plans for site preparation activities., • Coordinate scheduled outages with SSC, Air Traffic and Operations personnel., • Develop transition plans., • Resolve schedule conflicts., • Accompany unbadged personnel at facilities., • Work with LECs on schedules., • Develop briefings/information/reports on District status., • Work with other Districts/SSC on interstate service flows, transitions, cutovers, planning, etc., • Support District POC and SSCs with day-to-day work activities., • Review and provide comments on vendor Site Specific Implementation Plans (SSIP). Telecommunications Engineering Technician Required Qualifications: • Bachelor's degree in Electronics Engineering and 4 to 8 years of relevant experience OR a Master's degree and 2 to 6 years. Additional experience may be substituted/considered/accepted in lieu of degree., • Ability to travel 75-100%., • Ability to obtain a Public Trust Security Clearance Suitability (To be eligible for Public Trust Security Clearance, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years of the past 5 years consecutively with no breaks)., • Proficiency in MS Office Suites. Desired Qualifications: • 2+ years of experience working with Telco systems performing Network Troubleshooting., • Proficient working with AutoCAD or similar tools., • Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment Tower., • Knowledge of OSHA and general construction and electrical safety standards., • Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG. Leidos is a Fortune 500 company aimed at embracing and solving some of the world's most pressing challenges through science and technology. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. March 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Classification: Non-Exempt Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. $37.00 - $41.00 per hour depending on experience. Los Angeles City Boiler Operator License required Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers' manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred., • Some locations may require relevant certifications, a boiler license or PLC programming. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. Our full-time employees may enjoy: • 401 K Plan with Company Match, • Medical, Dental, Vision, and FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Employee Assistance Program (EAP), • Career Advancement, • Development Opportunities For a general description of benefits that are being offered for this position, please visit ___. About Us: We are Alsco Uniforms. We've been committed to our customers since 1889, proudly pioneering the uniform and linen rental industry and growing into a global leader serving over 350,000 customers across 13 countries. We provide exceptional service and create solutions that strengthen our customers' operations. At Alsco, our diverse workforce drives performance, innovation, and exceptional service. We're looking for individuals who want to build a rewarding career while making a meaningful impact. Explore how Alsco helps you build a successful career with competitive compensation, benefits, and ongoing opportunities for growth. Join our team and build your career with Alsco Uniforms! Alsco Uniforms is an Equal Employment Opportunity Employer Alsco Uniforms considers candidates for employment without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, or gender identity. Additionally, we do not discriminate based on genetic information, military status, protected veteran status, or other classification protected by applicable federal, state, or local law. Specifically, protected veteran status includes status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active-duty wartime or campaign badge veteran. Thank You for Considering Alsco Uniforms Thank you for your interest in joining Alsco Uniforms. Employment is contingent upon successful completion of background and safety sensitive drug screening. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Back Machine Technician II #NHBC-267 Chatsworth, California, United States Apply X Facebook LinkedIn Email Copy Chatsworth, California, United States1st Shift New Hampshire Ball Bearings, Inc. (NHBB) is a leading manufacturer of precision bearings and complex bearing assemblies for the aerospace, defense, medical, dental, and high technology markets. Founded in Peterborough, NH in 1946, our almost 8 decades of success are rooted in our commitment to the safety, health and wellness of our employees, and partnerships with our customers, suppliers and the communities that surround us. NHBB's Precision Division is based in the western corner of the San Fernando Valley surrounded by the Santa Susanna Mountains to the west and Los Angeles to the east. We are always on the lookout for outstanding individuals with a strong work ethic, creative spirit and positive attitude. If you have what it takes to be successful and our NHBB Values speak to you, apply now. JOB DESCRIPTION: Occupational Summary: Primary responsibility of a Senior Machine Maintenance is to perform a variety of diversified duties that involve the repair and maintenance of fixtures and machinery in support of manufacturing operations. Requirements: Education: High School diploma or equivalent or better Experience: 1 year of experience working with AC/DC current and basic theory Job Skills: Basic understanding of AC/DC and fundamental theory Demonstrated ability to perform competently a minimum of 10 of the identified Machine Maintenance skills OR demonstrated ability to perform competently any 1 of the following skills: Robotics PLC (including ability to debug PLC software) VFD Servo Encoder HMI, MMI or GUI Engineering Abilities: Ability to self diagnose and repair all CNC equipment and all critical high precision mechanical equipment Ability to self diagnose problems and perform troubleshooting to satisfactory conclusion (completing the repair) Ability to define needed equipment and parts to repair issues Understanding of electrical control systems including motor control, relay control Able to troubleshoot for AC/DC and some electronics Ability to work efficiently without constant supervision Other Requirements: Note: Physical job requirements may include standing, use of hands to assemble and or carry out job functions as well as sitting, lifting, carrying, bending and stooping during the course of the job. Ability to lift 40 lbs. Machine Maintenance Skills: • Automation for Industrial Controllers, • Robotics, • PLC, • VFD, • SERVO, • Stepping Motor, • Encoder, • Relays, • Circuit Breaker & Disconnect Switches, • Trouble Shooting, • Engineering, • Instrumentations, • HMI, MMI or GUI, • Electronics (General), • Electrical (General), • Programming, • Mechanical, • Plumbing, • Manufacturing, • Part Feeding, • Packaging, • Measuring, • Chemical, • Pneumatics, • Material, • Gasket/Seals/O-Rings, • PUMPS (Vacuum, Compressor, Centrifugal, Gear and Diaphragms, • Sheet Metal Fabrication, • Welding, • Heat Treat Duties and Responsibilities: Perform diversified duties to plan procedures, repair, rebuild, maintain and install a wide variety of complex standard and special purpose precision machine tools and equipment. Works from manufacturer's machine design prints; Electrical circuits diagrams, specifications and hydraulic diagrams as well as pneumatics. Use scale, calipers, levels, micrometers, parallels, jo-blocks, and various gauging devices, and DVM or diversify Electrical or Electronics test meters for measuring. Use a wide variety of hand and/or power tools incidental to work assignments and various types of hoisting equipment. Diagnose machine malfunctions and operating difficulties, determine extent of repairs necessary and estimate labor time; effect repairs and adjustments. Improvise and make adjustments to improve performance of machinery and equipment, increase speed and accuracy and minimize needed maintenance. Rebuild and repair machines and troublesome components and attachments. Dismantle, inspect, make-up or requisition replacement parts; assemble, test and adjust. Fit and align bearings, spindles and shafts; scrape ways; fit, align and calibrate measuring devices, moving parts and adjusting and feeding mechanisms. May lay out repair parts. Set-up and operate machine tools such as milling machines, surface grinders and metal-working lathes to machine parts to close tolerances, select tooling, speeds, feeds, operating sequences and methods involved. May perform welding, brazing, flame coating and sheet metal operations involved in repairing. May act as project leader on jobs; assign work to, instruct and inspect work of other area personnel and coordinate operations with Electricians General Maintenance personnel and others. Maintain necessary records. Detect and report unusual conditions and special problems to proper supervisor. Move materials, machinery, equipment and components, as required, in performance of duties or as directed. Follow prescribed safety rules and regulations. Keep work area in clean and orderly condition. Perform other duties as required or directed. Disclaimer: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. The duties and responsibilities described are not a comprehensive list and additional tasks may be assigned to the employee from time to time. The job description doesn't constitute a contract of employment and the company may exercise its employment-at-will rights at any time. The above lists all of the essential functions, education, knowledge, skills and abilities required for this job. These are the minimum requirements; employees must also demonstrate good interpersonal skills, proper attitude and professionalism, acceptable attendance and work behaviors - at a minimum. Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance PAY RANGE: $25 TO $30/HR DOE THE ABOVE DESCRIPTION COVERS THE MOST SIGNIFICANT DUTIES PERFORMED BUT DOES NOT EXCLUDE OTHER OCCASIONAL WORK ASSIGNMENTS NOT MENTIONED. THE INCLUSION OF WHICH WOULD BE IN CONFORMITY WITH THE FACTOR DEGREES ASSIGNED TO THIS JOB. #nhb123 #NHBBC

Maintenance Technician (Beverage Experience Desired) - Up tp $37 per hour / 1st shift This Jobot Job is hosted by: Gabriel Ozuna Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $37 per hour A bit about us: We are a leading producer, packager and distributor of high quality, great tasting, health-focused beverages. We continue to experience significant growth and are looking to expand our maintenance & engineering team by adding an experienced Maintenance Technician. Why join us? We value our people as much we value our products. When you put your people first, you can't lose. We strive to provide our employees with a great work environment, we offer industry leading pay & benefits. The future is bright here, come join us on this amazing journey! Job Details • Complete preventive maintenance work orders as assigned and recommend revisions to improve reliability, • Compiles shift information to lead shift “pass down” meetings., • Works with Maintenance Manager, Operations Manager, and Director of Engineering to drive Root Cause Failure Analysis., • 5 years of manufacturing maintenance experience, • 2 years of experience in Food, Beverage, or other consumer packaged goods. Preferred experience working on Krones bottling lines., • Mechanical/Electrical experience maintaining production equipment in a continuous production environment., • Preferred experience with Industrial Electrical Wiring, Mechanical/Electrical Devices, Circuits, Robotics, PLC, and computer controlled., • Know, understand and be compliant with Confined Space Entry procedure, NFPA 70E, and Lockout procedure is essential, • Experience with Krones bottling lines, • Experience with packaging/high-speed production (e.g., bottling, consumer products, etc.)., • Experience with basic electrical systems (e.g., starters, fuses, contacts, relays)., • Experience with compressors/ammonia systems (e.g., refrigeration systems)., • Experience with conveyors (air cylinders, diverters, sensors, motor/speed controls)., • Experience with electrical systems (installation, frequency drive, troubleshooting), • Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.)., • Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts)., • Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting)., • Experience with kinematics (e.g., line speed/sprocket size ratios, etc.)., • Experience with PLC (e.g., industrial maintenance, computer control systems, etc.)., • Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting)., • Experience with pneumatics/air compression (e.g., valves, cylinders, etc.)., • Experience with preventative maintenance (computerized preventative charts/data)., • Experience with pumps (e.g., troubleshooting, replacing seals/motors, understanding specs)., • Experience with schematics (e.g., electrical blueprints with switches, starters, maps, relays)., • Experience with SERVO (e.g., intelligent/robotic motors, in-coders, etc.), • Experience with troubleshooting (e.g., diagnostics, problem solving, etc.). Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionCandidate should be based in central CA and prepared to go to job sites from Mendocino county to Fresno county. Position Overview The Field Install Technician is responsible for the installation, calibration, and troubleshooting of Dirt Prep systems at customer sites. This role is highly technical, focused on ensuring that equipment and GPS systems are correctly set up, optimized, and integrated into customer workflows. Unlike sales-oriented positions, this role emphasizes technical expertise, customer support, and hands-on fieldwork to ensure maximum performance of our products. Key Responsibilities * Install, configure, and calibrate GPS-enabled equipment on earth-moving machinery and related construction equipment. * Perform system diagnostics, software updates, and troubleshooting on hardware and software. * Train operators and site personnel on system use, maintenance, and basic troubleshooting. * Conduct quality checks to ensure installations meet Dirt Prep technical standards. * Collaborate with engineering and product support teams to resolve complex technical issues. * Document installation processes, site conditions, and any adjustments for internal tracking and customer records. * Provide field feedback to the product team regarding system performance, customer usage, and potential improvements. * Maintain tools, testing equipment, and installation vehicles in good working order. * Adhere to all safety regulations and site-specific requirements. Qualifications * Required: * Strong mechanical and electrical aptitude. * Experience with heavy equipment, GPS systems, or construction machinery. * Ability to read and interpret technical manuals, schematics, and installation guides. * Proficiency with basic computer systems, software installation, and troubleshooting. * Strong problem-solving skills and attention to detail. * Valid driver’s license and ability to travel frequently to customer sites. * Preferred: * Previous experience with Leica, Trimble, or other GPS construction systems. * Experience working in construction, earthmoving, or survey-related industries. * Associate’s or technical degree in electronics, mechanical engineering, or related field. * OSHA or other safety certifications. Physical Requirements * Ability to lift up to 50 lbs. * Comfort working outdoors in varying weather conditions. * Willingness to work on active construction sites with appropriate safety gear. Travel Requirements: 25% - 75% overnight travel potential.

Description Are you interested in joining a dynamic, fast-paced environment? Under the general direction of the Manager of Support Services and Supervisors of Support Services the Anesthesia Tech/Patient Specialty Services Tech primary function is to assist the anesthesiologist in preparation of equipment needed to administer anesthesia; setting up invasive lines for patient monitoring, performing cell saving procedures, setting up laser and video equipment and assisting in laser procedures, setting up other O.R. equipment and performing clerical and coordinating duties as assigned by OR Leadership. Job duties will be performed following department protocols and manufacturer's recommendations in operating equipment; adherence to established procedures based on anesthesiologist's preference in setting up invasive lines. May convert to career Qualifications • We strongly prefer candidates with either certifications recognized by ASATT: Certified Anesthesia Technologist (Cer.A.T.T.) or Certified Anesthesia Technician (Cer.A.T.)., • Experience with Rapid Transfuser and invasive intravenous patient lines required., • Skills in setting priorities, organizing workload effectively and integrating multiple assignments with multilevel personnel., • Skill in speaking English language with medical/surgical terminology., • Ability to comply with department standards inclusive of attendance, dress code and varied work schedule., • Knowledge of Infection control and health surveillance, OSHA, Universal Precautions, Waste Management, handling of hazardous substances and medical Device Act., • Ability to meet physical requirements of the job relating to lifting, carrying, pulling, or pushing 50lbs. or more., • Extensive walking, standing and manual dexterity in operating equipment., • Should have strong electronics background recommended as well as experience with anesthesia machines., • Current CPR certification required., • BLS from American Red Cross or American Heart Association required.

You might serve in one of three roles: a Search & Rescue Medical Technician, a Dive Medical Technician or as a Special Operations Independent Duty Corpsman. Deep Sea Diving Medical Technician (DMT). Specialized training received and work experience gained in the course of service can lead to valuabl

Job Description If interested and you meet the qualifications, apply here directly or text Mike Dominguez at 562 566 4712 Pay: • 1st Shift, 6:00am - 4:30pm OR 8am - 6:30pm, • Monday - Friday, heavy overtime and weekends if needed. MUST be open to this Key Responsibilities • Support electrical engineers with testing, validation, and troubleshooting of aerospace electrical systems and components, • Assist in the build, modification, and repair of electrical assemblies, wire harnesses, PCBAs, and test fixtures, • Perform electrical tests and measurements using multimeters, hipot testers, continuity testers, oscilloscopes, and other test equipment, • Read and interpret electrical schematics, wiring diagrams, engineering drawings, and work instructions, • Document test results, engineering changes, and non‑conformances in accordance with AS9100 and aerospace quality standards, • Assist with failure analysis, root cause investigations, and corrective actions, • Support production and manufacturing teams with process improvements and technical troubleshooting, • Maintain tools, test equipment, and lab areas; ensure calibration and compliance, • Follow safety, ESD, quality, and regulatory procedures at all times Required Qualifications • Associate degree or technical certification in Electrical Engineering Technology, Electronics, or related field (or equivalent hands‑on aerospace experience), • Strong understanding of electrical principles, wiring, and circuit functionality, • Experience working with electrical assemblies, harnesses, or PCBAs, • Ability to read and interpret schematics, wiring diagrams, and BOMs, • Hands‑on experience using hand tools, power tools, and electrical test equipment, • Strong attention to detail and ability to follow aerospace procedures and documentation Preferred Qualifications • Aerospace industry experience (commercial, defense, space, or UAV), • Familiarity with AS9100, IPC‑A‑610, IPC/WHMA‑A‑620, or similar standards, • Experience with wire harness fabrication, termination, crimping, soldering, and rework, • Exposure to environmental, vibration, or functional testing, • Experience supporting engineering change orders (ECOs) or R&D builds, • Basic knowledge of CAD tools or electrical design software Common Alternate Titles (Aerospace) • Electrical Engineering Technician, • Electronics Engineering Technician, • Aerospace Engineering Technician, • Test Engineering Technician (Electrical) Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Long Beach,CA. Application Deadline This position is anticipated to close on Apr 8, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Factory Test team designs, builds, and operates the infrastructure needed to test nearly every part of Terran R right here at our headquarters in Long Beach, CA. This centralized approach provides engineers and technicians with exposure to the entire product lifecycle across a wide range of part sizes and complexities. The scope and scale are significant, with test stands capable of handling millions of pounds of force. Team members lead multiple projects in parallel, avoiding silos and gaining broad technical experience without needing a background in aerospace. With high-impact campaigns ahead, now is the time to join. You won't just execute, but you'll help shape and scale the test infrastructure required to meet the demands of a rapidly growing launch program. About the Role: As a Data and Control System Hardware Engineer, you will be responsible for the design, build, and integration of data systems at our Long Beach facilities. When working with standard low voltage control and instrumentation, you will design robust systems that can be integrated and operated by engineers without an electrical background. For high voltage or more unique applications, you will be responsible for designing a complete solution and training future operators. You will be required to be hands on with the hardware, working side-by-side with our technician team to build and debug your projects. We want all of our engineers to be multidisciplinary, and you will have frequent opportunities to branch into operations and test planning roles. Your projects will span a variety of construction methods, sizes, and applications. These could include anything from portable data systems to large motion control cabinets. The kinds of hardware you will design and work with may include: • Motion Control Systems, • AC / DC Power Distribution Systems, • Wiring Harnesses, • Portable Data Systems, • PCB's (signal routing and power management focus), • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field, • 5+ years of experience developing, activating, and troubleshooting electrical systems. Preferably in a highly cross-functional environment, • Strong electrical engineering fundamental knowledge, • Experience designing and working with high voltage DC electronics, • Demonstrated ability to identify and mitigate risks in complex systems, • Familiarity with data and control systems (SCADA, PLC's, NI, Beckhoff, etc.), • Familiar with scripting languages such as Python or MATLAB for preforming analysis or writing automation tools., • Comfortable using schematic capture and PCB design tools such as Altium. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$124,000—$170,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description The purpose of this position is to maintain electronics, computers, and other various broadcast equipment through reverse engineering and/or finding replacement parts as available and ensures all equipment is operational prior to shipment into the field and various job sites. A strong work history working with Electronic equipment is required. We are seeking a person with a minimum 3 -5 years of experience working with equipment in the Broadcast Industry, Sports, and Entertainment. This is a Full-Time hourly position, Monday through Friday, 8:00AM - 5:00PM, on-site at our Van Nuys, CA location. There will be some overtime as needed. Wage is $40 - $42 per hour. Key Duties: • Repair, calibrate, and test electronic equipment at the component level., • Provide technical assistance and troubleshoot various issues both in person and remotely., • Document faults and problems with equipment and make proper orders for repairs., • Repair and assemble various specialized copper cables as deemed necessary., • Ensure “in progress” repairs are identified, documented, and organized., • Supports Shop team to communicate and coordinate repairs that need to go out of house., • Collaborate with internal Engineers to assist with custom solutions as needed. Requirements: • Technical or Bachelor’s Degree in Engineering or equivalent work experience, • Valid US Drivers License and an ability to operate company vehicles for deliveries and movement of various equipment., • Requires industry-related experience as a repair/maintenance technician or engineer., • Demonstrate basic knowledge of broadcast and computer technology, equipment, and facilities, • Must be able a self-motivated problem solver who thinks outside the box, • Strong communication and organizational skills., • Aptitude for continuous growth of equipment knowledge and troubleshooting skills. Benefits: • Medical, Dental, and Vision coverage, • Vacation Days, • Sick Days, • 401(k), • Discount Programs, • Life Insurance, • Disability Insurance, • Employee Assistance Program, • Flexible Spending Account You might not know our name, but you’ve probably seen our work – on stage, on screen or on the field. Our technology solutions and unique Global Production Ecosystem empower content creators and rights holders to tell their stories in breakthrough ways. We’ve supported some of the world’s most watched productions and live events in sports, entertainment, concerts, festivals, film, TV and more. For over 35 years our clients have trusted us to deliver live production, live events, and virtual production solutions for them, anytime, anywhere. Put simply, we bring content to life. Why Join Us? Check us out at

Job Description Tool Calibration Technician Location: Van Nuys, CA Pay Range: $18.00 – $26.00 per hour (depending on experience and qualifications) Employment Type: Full-Time | Technical | Hands-On About the Role CAPS Aviation is seeking a detail-oriented and mechanically inclined Tool Calibration Technician to join our in-house calibration lab. In this role, you’ll be responsible for inspecting, testing, and calibrating precision tools and equipment to ensure compliance with manufacturer specifications and traceable industry standards. This is an excellent opportunity for someone with a background or interest in metrology, mechanics, quality assurance, or electrical testing. Prior calibration experience is helpful but not required—we provide full training for candidates with strong technical aptitude and a desire to learn. About CAPS Aviation CAPS Aviation is a 100% women-owned FAA Certified Part 145 Repair Station with facilities in Los Angeles and Austin. Our in-house calibration lab supports both internal and external clients, delivering reliable, standards-based calibration services for aviation maintenance and manufacturing tools. We are committed to quality, traceability, and exceptional service. Responsibilities * Calibrate and verify accuracy of mechanical, electrical, pressure, torque, and dimensional tools * Operate and maintain calibration standards such as multimeters, torque testers, pressure gauges, calipers, micrometers, and scales * Record “as found” and “as left” data in accordance with ISO/IEC 17025 principles * Identify tools out of tolerance and assist with basic troubleshooting and minor adjustments * Clean, label, and package tools following service completion * Ensure proper documentation for compliance and traceability * Work from established procedures while maintaining a clean, organized lab environment * Communicate tool status and updates with team members and customers as needed Qualifications * High school diploma or GED required * Mechanical or technical background preferred (e.g., automotive, machining, electronics, quality control) * Familiarity with hand tools, test equipment, or precision measurement devices * Strong attention to detail and ability to follow detailed procedures * Basic math and computer skills, including data entry * Strong reading comprehension and documentation skills * Ability to lift up to 40 lbs and remain focused in a detail-driven environment * Willingness to learn and grow within a structured process Why CAPS Aviation? * Industry-specific training with room to grow * Exposure to precision tools and traceable calibration standards * Stable, full-time work in a professional lab environment * Supportive team culture that values quality, consistency, and curiosity * Opportunity to develop highly transferable technical skills CAPS Aviation is an Equal Opportunity Employer. We welcome applicants from all backgrounds and make hiring decisions based on qualifications, skills, and potential. Company DescriptionCAPS Aviation is a 100% women-owned FAA Certified Part 145 Repair Station with locations in Los Angeles and Austin. Since 1988, we’ve specialized in the repair and overhaul of aviation safety equipment including life rafts, life vests, and survival kits. Our customers range from private jet operators to major OEMs, and our work directly supports aviation safety. We take pride in our quality, compliance, and team culture. At CAPS, we train smart, capable people—no aviation experience required. If you’re reliable, hands-on, and curious about how things work, you’ll fit right in. We offer full training, steady hours, and the chance to build a career in an exciting and essential industry.CAPS Aviation is a 100% women-owned FAA Certified Part 145 Repair Station with locations in Los Angeles and Austin. Since 1988, we’ve specialized in the repair and overhaul of aviation safety equipment including life rafts, life vests, and survival kits. Our customers range from private jet operators to major OEMs, and our work directly supports aviation safety.\r\n\r\nWe take pride in our quality, compliance, and team culture. At CAPS, we train smart, capable people—no aviation experience required. If you’re reliable, hands-on, and curious about how things work, you’ll fit right in. We offer full training, steady hours, and the chance to build a career in an exciting and essential industry.

Job Description Solid State Devices, Inc. High Density, High Performance, and High Reliability Products for Aerospace & Defense SSDI has been a pioneer in semiconductor manufacturing for over 50 years and has earned a reputation for setting the highest standards of reliability and performance. SSDI's high power and high voltage semiconductors and electronic systems meet the critical needs of many Aerospace and Defense applications. Equipment Technician Job Summary: We are currently seeking an experienced Equipment Technician to join our Wafer Fabrication team at Solid State Devices, Inc. This is a technical maintenance role in a manufacturing environment where equipment reliability and cleanroom or ESD protocols are critical. Key Responsibilities include troubleshooting, diagnosing, and fixing mechanical, electrical, or control system issues on production tools and equipment, minimizing downtime, interpret error codes, and replace worn components, install or swap out interface hardware, which could be part of automated testers or production jigs, test setups, wiring, or fixture alignment, ensure all stations are ESD-compliant, using ESD testers and documenting results, familiar with ESD wrist strap checkers, grounding points, and ISO/ANSI ESD standards, track, organize, and possibly tag equipment, coordinate with external contacts for parts, service, or technical support, proactively maintain equipment based on schedules, logs, or usage data to avoid breakdowns, cover infrastructure systems-HVAC, DI water, compressed air, vacuums, etc., work on facility support systems or coordinate with building maintenance teams. Preferred Qualifications: • Able to interpret electrical and mechanical diagrams, • Understand how production machinery operates and are familiar with automation or control systems, • Experience working with industrial furnaces-possibly in heat treatment, semiconductor, or ceramics manufacturing, • Familiar with systems that produce ultra-pure water, often used in semiconductor processes, • Knowledge of water quality standards (e.g., resistivity), filters, or maintenance protocols, • Preventive maintenance, leak detection, or rebuild experience, • Experience setting up or calibrating temperature control systems, • Understand how temperature regulation works-possibly with PID controllers, thermocouples, RTDs, etc. Education: Associate's Degree (preferred) - Electronics Technology, Industrial Maintenance, Mechatronics Experience: Minimum of 3 years work experience in a related technical or equipment maintenance field. Related work experience or hands-on training or certifications (e.g., IPC, OSHA, ESD, etc.) Schedule: Full-time / Monday - Friday / 6:00am-2:30pm Salary: $25.00 - $30.00 per hour / Bi-Weekly Pay Schedule (Direct Deposit) This is not a guarantee of compensation or salary, as final offer amount may vary based on experience. Solid State Devices, Inc. proudly offers a comprehensive benefits package to all regular full-time employees, which includes: * Medical, Dental, and Vision Insurance * Group Life Insurance & AD&D (Accidental Death and Dismemberment) * Voluntary Term Life Insurance & AD&D * Paid Time Off (PTO) * 8 Paid Holidays * 401(k) Retirement Plan with Company Match We are committed to supporting the health, financial security, and well-being of our employees and their families. Solid State Devices, Inc. is an Equal Opportunity Employer We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. I understand that if I am extended an offer of employment, it will be conditional upon my successfully passing a post-offer, pre-employment Background and Drug Screen. Upon employment, I agree to the following: • Signing an Employee Creation Assignment & Non-Disclosure, • Abiding by all rules, regulations, and performance standards of Solid State Devices, Inc., • Application forms and materials are the property of Solid State Devices, Inc.

Job Description Job Title: Electrical Mechanical Technician PAY: $30-$39 Job Description We are seeking a detail-oriented Electrical Mechanical Technician to join our team. The ideal candidate will excel in high-precision electromechanical assembly and rework, adhering to engineering directions and maintaining ESD-safe practices. You will be responsible for precision torquing and mechanical integration according to specifications, conducting surface inspections, and maintaining detailed documentation. You will also interpret technical drawings, schematics, and build instructions while supporting prototype builds and iterative engineering changes. Responsibilities • Perform high-precision electromechanical assembly and rework following engineering directions., • Handle PCBA with care, ensuring adherence to ESD-safe practices., • Execute precision torquing and mechanical integration to specifications., • Conduct thorough surface inspections and maintain detailed documentation., • Interpret technical drawings, schematics, and build instructions accurately., • Proficiency in electrical, mechanical, and electronics systems., • Strong soldering skills., • Familiarity with IPC-A-620 (Cable & Wire Harness Assembly) is beneficial., • Knowledge of J-STD-001 (Soldering Standards) is an advantage. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About Mynaric USA With offices in Munich, Germany and Hawthorne, California, Mynaric produces optical fiber for the skies and, as a pioneer in laser communications, enables extremely fast and secure wireless data transmission between satellites, aircraft, drones, and the ground. The products are used by well-known international technology companies to build global communication networks. The emerging Internet over the clouds will connect the un- or under-connected 3 billion people, bring the Internet of Things to the most remote corners of the earth and make international communication more secure than ever. Position Summary We are seeking a skilled, hands-on Test Technician to perform and maintain environmental testing for our electronics products. You will work closely with test engineering, production, and test teams to ensure quality, reliability, and manufacturability. Success in this role is measured by accurate and efficient testing, proper documentation, and reliable operation of test equipment. Job Type: Hourly, Full-time Essential Duties and Responsibilities: • Responsible for setting up and operating vibe and thermal equipment (including equipment calibration/maintenance duties) and other related duties as required., • Set up, operate, and maintain environmental test equipment, including vibration tables, thermal chambers, and related equipment; perform routine calibration and maintenance., • Conduct functional, environmental, and reliability testing on electronic assemblies and finished products., • Identify test failures or equipment issues and assist in troubleshooting to support engineering and production teams., • Perform routine checks, maintenance, and reporting for test systems and support equipment., • Help ensure test throughput and scheduling targets are met while maintaining accuracy and quality standards., • Bachelor’s degree in engineering, Mechanical, Manufacturing or a related field preferred., • Demonstrated experience working in a highly adaptive and iterative environment. Experience in aerospace, semiconductor, or electronic test environments., • Excellent organizational skills and attention to detail., • Analytical and problem-solving skills., • Team player that has a service mentality and thrives in fast paced environments., • Ability to work independently and to reliably “get things done “, even in high-pressure situations., • Experience within a rapidly changing and growing environment., • Experience working with ERP, MRP, or MES systems., • This position has no supervisory responsibilities., • Prolong sitting or standing for long periods of time, bending, grasping, sitting, pulling, pushing, and crouching., • Must be willing to work extended hours and weekends as needed., • Must be able to lift a minimum of 25 lbs. unassisted., • Must be able to use tools such as microscopes, for long periods., • Medical, Dental, Vision, • Flexible Spending Account (FSA), • Disability Insurance/ Basic Life Insurance, • 401(k) with matching, • Paid Time Off, • Gym Pass, • A dynamic work environment, • A flexible work environment Essential Job Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • 2–3 years of test or systems experience, preferably in electronics or environmental testing., • Experience with automation in testing or developing test fixtures., • Familiarity with ERP, MRP, or MES systems. Supervisory Responsibilities • Prolong sitting or standing for long periods of time, bending, grasping, sitting, pulling, pushing, and crouching., • Must be willing to work extended hours and weekends as needed., • Must be able to lift a minimum of 25 lbs. unassisted., • Medical, Dental, Vision, • Flexible Spending Account (FSA), • Disability Insurance/ Basic Life Insurance, • 401(k) with matching, • Paid Time Off, • Gym Pass, • A dynamic work environment

Job DescriptionDescriptionAs a PCBA Technician, you will perform a wide range of spacecraft assembly, rework, and diagnostic tasks to support the development and production of high-reliability avionics and flight hardware. You will work closely with electrical engineering, manufacturing, and test teams to ensure the highest levels of workmanship, quality and mission readiness. Responsibilities • Read and interpret schematics, PCB layer stacks, BOMs, ECOs, and assembly drawings with high accuracy., • Perform high-quality soldering and SMT assembly/rework on a wide range of componentsizes and package types, including fine-pitch and high-density devices., • Assemble, modify, and repair PCBAs according to engineering instructions, including component replacements, wiring updates, and mechanical integration steps., • Conduct visual inspections and basic electrical checks to verify workmanship quality and identify assembly defects., • Operate and maintain standard electronics lab equipment, including microscopes, soldering stations, reflow tools, multimeters, and oscilloscopes., • Perform underfill, conformal coating, staking, and potting per spacecraft environmental requirements., • Follow strict ESD, FOD, and cleanroom protocols during all manufacturing evolutions., • 5+ years of hands-on experience in PCBA assembly, rework, or electronics technician roles., • Familiarity with IPC-A-610 or IPC-7711/7721 workmanship standards (formal certification is a plus), • Proficiency in soldering and rework of SMT and through-hole components, including fine-pitch packages., • Strong ability to read and interpret electrical schematics, assembly drawings, and PCB documentation., • Demonstrated experience performing component replacements, wire mods, jumpers, and board-level repairs., • Experience working with underfilling, conformal coating, staking, or potting materials., • Ability to follow detailed engineering instructions, work orders, and ECO-drive modifications., • Strong attention to detail and commitment to high-reliability workmanship., • Ability to work and collaborate effectively in a team-first environment, supporting cross-functional engineering, manufacturing, and test groups., • Prior experience working on aerospace, spaceflight, defense, or other high-reliability electronic systems., • IPC-A-610 or IPC-7711/7721 certification, or equivalent industry-recognized training., • Experience supporting prototype hardware builds, first-article assemblies, or rapid-turn engineering modifications., • Working knowledge of cable and harness fabrication. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionOverview Are you a hands-on problem-solver with a passion for precision mechanics and cutting-edge electronics? We are seeking a talented Electromechanical Technician to join our dynamic team in Northridge, CA. This isn't just a job; it's an opportunity to be at the forefront of innovation, working on complex systems that integrate mechanical, electrical, and software components. If you thrive in an environment where your technical expertise directly contributes to groundbreaking solutions and you're eager to continuously learn and grow, this role offers an exciting career path with significant impact. Our company fosters a collaborative and supportive culture where curiosity is encouraged, and professional development is a priority. We believe in empowering our team members with the tools and knowledge they need to excel, providing ample opportunities for skill enhancement and career advancement. You'll work alongside experienced engineers and technicians, contributing to projects that challenge your abilities and expand your understanding of sophisticated electromechanical systems. This role is ideal for a dedicated individual looking to deepen their technical skills and take on increasing levels of responsibility within a forward-thinking organization. Join us and become a vital part of a team that values ingenuity, quality, and a commitment to excellence. We're looking for someone who is not only proficient in their craft but also eager to share knowledge, embrace new challenges, and contribute to a positive and productive work environment. If you're ready to make a tangible difference and grow your career in a supportive and innovative setting, we invite you to explore this exciting opportunity. Duties & Responsibilities As an Electromechanical Technician, your responsibilities will include a diverse range of tasks focused on the assembly, testing, maintenance, and troubleshooting of advanced electromechanical systems. Your contributions will be critical to ensuring the reliability and performance of our products. • Perform precise assembly and integration of mechanical and electrical components according to schematics, blueprints, and engineering specifications., • Conduct diagnostic tests and troubleshooting of complex electromechanical systems to identify root causes of malfunctions and implement effective solutions., • Calibrate and adjust sensors, actuators, and control systems to meet performance requirements., • Execute preventive maintenance procedures on equipment to ensure optimal functionality and extend lifespan., • Document all testing, maintenance, and repair activities accurately and thoroughly, maintaining detailed records., • Collaborate closely with engineering teams to provide feedback on design improvements and assist in the development of new products., • Assist in the setup and validation of new equipment and processes., • Participate in cross-functional teams to resolve technical challenges and improve operational efficiency., • Adhere to all safety protocols and quality standards in a fast-paced manufacturing or R&D environment., • Health and Wellness:Medical, dental, and vision insurance plans with various coverage options., • Financial Security:401(k) retirement plan with company matching contributions to help you plan for your future., • Paid Time Off:Generous paid time off (PTO) policy, including vacation, sick leave, and company-paid holidays., • Professional Development:Opportunities for continuous learning through internal training programs, workshops, and tuition reimbursement for approved courses and certifications., • Work-Life Balance:Potential for flexible work arrangements and a supportive environment that values personal well-being., • Minimum of 3 years of hands-on experience as an Electromechanical Technician or in a similar role., • Associate's degree or technical certification in Electromechanical Technology, Electronics, Mechatronics, or a related field., • Proficiency in reading and interpreting electrical schematics, mechanical drawings, and assembly instructions., • Demonstrated ability to use a variety of hand tools, power tools, and precision measurement equipment (e.g., multimeters, oscilloscopes, calipers)., • Strong understanding of electrical circuits, control systems, motors, sensors, and mechanical assemblies., • Experience with soldering and wiring techniques., • Basic computer skills, including familiarity with diagnostic software and Microsoft Office Suite., • A proactive and independent problem-solver who can diagnose issues efficiently and implement effective solutions., • Possesses excellent communication skills, capable of clearly explaining technical issues and collaborating effectively with team members and engineers., • Demonstrates a strong commitment to quality, accuracy, and safety in all aspects of their work., • Adaptable and eager to learn new technologies and processes as they evolve., • Exhibits a positive attitude, strong work ethic, and ability to work effectively both independently and as part of a team., • Someone who takes pride in their craftsmanship and contributes to a culture of continuous improvement., • Work Location:This is an onsite position located at our facility in Northridge, CA., • Travel Requirements:Minimal to no travel is anticipated for this role.