Trabajos engineer manager en Rochester, New YorkCrear alertas

Job Description We are currently looking for a Substation Physical Engineer from 0 to 5 years of experience. Duties • Assist with create/modify detailed design for Substation:, • Control building (relay panels, facilities, cable raceways, trays, etc.), • Busbar and strain bus, • Equipment & support structures, • Assembly drawings, • Cables and connectors, • Lightning protection and lighting, • Grounding grid, • Conduit and tranches, • Perform basic calculations such as:, • Grounding, • Lighting and lightning, • Cable ampacity, • Tray sizing, • Trench sizing, • Conduit sizing, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • A Bachelor’s Degree in Electrical Engineering, Mechanical or Civil is preferred., • 0 to 5 years of experience in Substation Physical design., • Willing to pursue PE license in NY and NC., • Desired knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Periodic travel, ability to visit project sites. Salary Range: $60,000 - $86,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description LaBella is currently seeking a Project Manager in Civil Engineering in our Land Development Group out of our Rochester, Syracuse, or Buffalo Offices. • Independently manage Land Development Civil Engineering projects from start to finish with a team of junior engineers. Includes overseeing the preparation of Civil Engineering Site Plans from conceptual design through construction documents. Includes preparation of Stormwater Pollution Prevention Plans., • Bachelors Degree in Civil Engineering., • 8+ years of experience with demonstrated success in a professional consulting environment., • Strong Land Development Design experience including preparation of Site/Grading/Utility Plans, Construction Details, and Conceptual Layout plans. Stormwater Design experience including preparation of Stormwater Pollution Prevention Plans. Experience obtaining agency approvals., • Experience in project management. Ability to effectively manage project budgets and workload by delegating to junior staff., • Strong written and verbal communication skills. Candidate should possess the ability to interact effectively with clients, project teams, colleagues, and outside agencies. Ability to collaborate efficiently with teammates in different disciplines and in different locations., • Strong critical thinking, problem solving, and attention to detail skills. Ability to make decisions by weighing different factors from multiple points of view., • Registration as a Professional Engineer (PE) is encouraged., • AutoCAD and HydroCAD experience is preferred., • Construction administration experience is preferred. Salary Range: $90,000.00 - $120,000.00 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Senior Mechanical Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption, and modifications of standard techniques and procedures., • Works with the Principal, Associate, or Project Manager to finalize project scope and schedule of deliverables and understands priorities identified., • Applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies, and follows projects through program, schematic, design development, construction document, bidding, and construction phases., • Supervises, coordinates, and reviews work., • Schedules and assigns work to meet completion dates., • Develop reports, studies, and system analysis., • Works in an efficient and effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts clients directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs, schedules, and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR tlCG3S3mSI

Job DescriptionM/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Plumbing/Fire Protection Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of Project Engineer/Designer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer/Designer, Project Engineer/Designer, Group Manager, Associates and or Principal., • Performs assignments independently after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • In addition to duties of CAD Operator., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • May supervise or coordinates the work of CAD Operators., • Associate degree, bachelor's degree, or equivalent combination of experience and education., • CAD (Revit) experience preferred. Compensation Range Powered by JazzHR s8Yc4uhWj7

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR CUWEsjdzmC

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR iOhpgFyNQA

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Mechanical Design Engineer in our Rochester, NY office. We are a growing full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of the Project Engineer/Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Partner, Associate, and or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a partial or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate degree, Bachelor of Science degree, or equivalent combination of education and experience., • The compensation range for this position is $62,400 to $72,500 per year. M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR sYDiJ4F3xJ

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for a Plumbing/Fire Protection Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 1gMjSK2pvt

Job Description Torion USA is looking for an energetic, focused and interested employee that would like to work at a startup company that provides leading edge products and systems designed for the fuel cycle of commercial fusion companies. We are an agile team of people that are dedicated to research, product development, and engineering design under our quality assurance programs. Applicants should be willing to engage in a wide range of tasks from multiple disciplines and have a strong desire to “get in on the ground floor” of a growing company that is already positioned to disrupt the fusion fuel cycle market. More specifically, we are interested in hiring an applicant with a mechanical engineering degree, preferably with 5-10 years of experience in process engineering and project management. The candidate must show process engineering experience in generating process documentation such as P&IDs, PFDs, line lists, battery limit tables, relief load summaries, etc. The candidate must also show project management experience in maintaining project schedules, risk trackers, mitigation plans, document transmittals, handling customer interfacing and meetings. The ability to work with Gant Charts for scheduling, Solidworks for 3D modeling and Autocad for 2D drawings is a great asset. As well, technical aptitude and vacuum system experience would be a benefit. Applicants should provide an example of successful project management, a sample of process engineering documents and a sample of P&IDs and 3D process piping models.

Job Description Insero Talent Solutions is recruiting an Applications Engineer/Project Manager for a growing manufacturing company in Rochester, NY. Job Summary: The ERP Specialist will be a key member of the deployment and implementation team. This role requires a strong knowledge of the various business needs in a manufacturing environment including Sales, Scheduling, Engineering, Manufacturing, Quality and Finance. The position reports directly to the IT Manager locally, as well as the IT Manager internationally and interacts with all levels of the organization. Implementation Responsibilities: · Understand site business requirements · Work with the SAGE Central Team in the implementation of SAGE X3, propose the evolution of the Core Model and work with the team to analyze change requests · Support data preparation and migration · Follow-up on specific developments when needed · Animate workshops for acceptance tests · Conduct on-site training for end users and create training materials for specific user interfaces General Responsibilities: · Create, maintain and develop dashboards, forms, SSRS reports, BAQs, and other customizations to maximize utilization and productivity of the ERP system to meet the needs of the organization. · Test and implement new SAGE modules at other sites · Provide daily ERP support for system users in Honeoye Falls and Longwood. · Participate in ad-hoc or special projects. · Provide system training as needed to support a high level of competency across the organization. · Assist with developing and managing data exchanges with ERP system and other software systems. Required Skills and Experience: · At least five years experience in a manufacturing environment-must understand the common manufacturing processes and workflows. At least three years experience in implementing and working with ERP systems (SAGE preferred but not required) · BS in Computer Science or related IT field. · Experience in implementation and project management of systems in a manufacturing environment. · Understanding of common manufacturing processes and workflows. · Strong knowledge of SQL and SSRS and/or Crystal reporting tools. · Ability to understand the needs of various users in different departments, including Manufacturing, Sales, Engineering, Quality, Finance and Management. · Ability to interact professionally and effectively with all levels of the organization. · Excellent written and verbal communication skills. · Experience in multi-site ERP management Preferred Skills and Experience: · Experience with Visual Basic. · General IT support experience. · Experience in training and developing training materials · Ability to work solo and as part of a team

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description Job Title: Field Construction Inspector (FCI) Location: Rochester, NY Job Type: Full-time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Field Construction Inspector (FCI) to support railroad safety services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High school diploma or equivalent. Required Experience: Minimum 2 years of experience in one or more of the following, civil construction inspection involving grade separation projects, roadway paving/construction, utility work and/or experience with a Freight Railroad, Regional Short Line Railroad, Transit System, State DOT Highway or Rail Division, Railroad Supplier, Highway/Railroad Contractor, and/or Civil Engineering/Railroad Consultant. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the workplace and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and act before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various construction plans, OSHA/Railroad rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize workload to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables, • Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Civil Highway Construction, or Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes week(s) at a time., • Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: • Provide jobsite coordination., • Provide clear and concise communication with Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough safety briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities., • Enforce Project Site Safety in accordance Federal, State, Local and Railroad polices. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions. Keywords: Civil Engineer, Construction Inspector, Construction Foreman, Construction Manager, Project Superintendent, Civil Engineering Technician, Safety Manager, Safety Inspector, Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flag Person, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to always remain committed to safety while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important, and no service is so urgent that we may not take the time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true to our commitment to being the leader in safety throughout the railroad industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identify, age, veteran status, national origin, or any other status protected by law or regulation. Job Posted by ApplicantPro

Job Description We are looking for an experienced Transmission and Distribution Engineer to join our rapidly growing T&D team. The ideal candidate will have a background in both Overhead and Underground design and the ability to lead projects, mentor younger staff, and serve as the point of contact for Clients. This position will oversee multiple projects of various complexities, from Concept Design through Construction and As-Built. Duties: • Oversee design of projects including new lines, rebuilds, overhead and underground transmission and distribution., • Mentor younger staff and perform reviews of design drawings and documents., • Develop and manage project schedules, estimates, cashflows and invoicing., • Work with Program Manager to prioritize workload and manage deliverables., • Serve as main point of contact to the client for project., • Minimum of 7 years in Transmission and Distribution Design., • Valid PE license, NY is strongly preferred., • Excellent communication skills., • Experience in Project Management., • Proficiency working with PLS-CADD, AutoCAD Civil 3D, MFAD, CYMCAP and other industry software. Salary Range: $95,000 to $105,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer’s absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Providing detail drawings., • Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment., • Well versed in PLC and HMI programming., • Well versed in digital and analog AC/DC drive design, programming and installation., • Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software., • Manage new equipment installations and startups., • Design, install and startup equipment modifications., • Negotiate price and purchase equipment and services as needed., • Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items., • Fill out project item listings., • Provide managerial input to the maintenance department as well as outside contractors., • A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR., • Responsible for working safely and being a safety leader. Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm’s Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and hear, taste or smell. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or other related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvements actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionDescription: Join our team as a Highway Project Engineer and take the lead in designing, constructing, and maintaining vital transportation infrastructure! In this dynamic role, you'll combine engineering expertise with project management skills to ensure safe, efficient roads and highways. You'll tackle specialized design tasks and oversee small projects from start to finish, all while ensuring compliance with industry standards and codes. If you're ready to drive impactful projects and shape the future of transportation, we want to hear from you! Why Fisher Associates? At Fisher Associates, we believe in cultivating our gifts to create a legacy of infrastructure that improves the quality of life. Our work shapes communities, enhances sustainability, and creates meaningful connections that last for generations. • Be Heard, Be Valued – We foster an inclusive culture where leadership welcomes your ideas and feedback., • Collaborate & Innovate – Work with a highly skilled, multidisciplinary team on diverse and impactful projects., • Career Growth – Advance with clearly defined career paths, tuition assistance, and ongoing training., • Work-Life Balance – Enjoy a flexible hybrid schedule, optional half-day Fridays, and generous PTO., • Competitive Benefits – We offer a robust benefits package including immediate 401(k) enrollment with annual company contributions, comprehensive health insurance options and company-paid life and long-term disability insurance. Who We Are: Fisher Associates, P.E., L.S., L.A., D.P.C, is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. All services are delivered through the firm’s signature “Clientship” philosophy, which emphasizes not only customized, innovative quality solutions but also an exceptional client experience driven by clear communication, deep expertise, and proactive client advocacy. Salary Range: $100,000 - $130,000 annually Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Essential Functions • Effectively complete work assignments related to highway design, drainage design, alignments, and other duties applicable to these projects., • Develop preliminary and detailed final design plans and cost analysis for new highway projects or improvements to existing infrastructure that meet client’s goals., • Ensure designs adhere to safety standards, local regulations, and best practices., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • Coordinate with reviewers and other disciplines to ensure accuracy and quality of work., • Attend routine project design meetings and coordinate regularly with the technical staff, to complete the project within the assigned project budget and on schedule., • Provide mentoring, direction and oversight to internal design staff., • Assist Project Manager with project presentations, proposed project schedules and development tasks assigned by the Project Manager. #LI-Hybrid Requirements: Education & Experience • B.S. degree in Civil Engineering or related field (MS preferred), • 10-15 years minimum of transportation experience, highway engineering experience preferred., • Professional Engineering License required., • Uphold professional performance standards aligned with the company’s Mission, Vision, and Core Values., • Build and maintain strong client relationships in adherence to the Fisher Clientship philosophy., • Demonstrate high-quality work and a commitment to continuous improvement., • Collaborate effectively across all levels, fostering respect, trust, and active listening in all interactions., • Take ownership of responsibilities and outcomes with integrity, honesty, and transparency., • Exhibit a proactive, self-motivated attitude with a strong desire to learn and grow., • Apply critical thinking and problem-solving skills while demonstrating sound judgment., • Communicate professionally and effectively in both written and verbal formats., • Manage projects, time, and tasks efficiently in a fast-paced environment., • Maintain strong attention to detail while adapting to changing priorities., • Accept and respond positively to feedback. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Senior Commissioning Agent in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Group Manager to finalize Project Scope and Schedule of tasks and deliverables., • Is assisted on projects by other Engineers and/or Designers., • Assembles commissioning team and holds a scoping meeting to identify responsibilities for all parties., • Develops commissioning plan and update as required., • Chairs commissioning meetings as required., • Reviews the owner objectives documentation for clarity and completeness., • Coordinates the commissioning work during all phases of the project., • Conducts reviews of the design, drawings, and specifications at various stages of development., • Develops a design review report including all design related comments, suggestions, recommendations, and cost implications., • Develops project commissioning specifications., • Reviews and accepts contractor submittals applicable to systems being commissioned., • Reviews trade coordination drawings or building model., • Develops and distributes pre-functional checklists., • Reviews and comments on contractor start-up and initial systems checkout plan., • Performs site visits to observe project progress and attend selected jobsite meetings., • Witnesses and documents HVAC piping pressure test and flushing., • Witnesses and documents ductwork testing and cleaning., • Documents construction checklist completion., • Documents systems startups., • Reviews air and water systems balancing reports., • Develops functional performance test procedures for equipment and systems to be commissioned., • Verifies accuracy of air and water testing and balance reports., • Analyzes D.D.C. system trend logs., • Coordinates, witnesses and documents functional performance tests performed by installing contractors., • Maintains a masters issue log., • Reviews equipment warranties and convey owner's responsibilities., • Oversees and approves the training of the owner's personnel., • Reviews and accepts the operating and maintenance manuals for commissioned equipment., • Compiles a commissioning record, which includes a summary report, listing of all outstanding non-compliance items along with recommendations for improvements. Each non-compliance issue shall be referenced to the specific functional test, inspection, trend log, etc., where the deficiency is documented., • Includes Issues log, commissioning plan progress reports, submittal and operating and maintenance manual reviews, training record, test schedules, construction checklists, start-up reports, functional test procedures, and trend log analysis., • Coordinates and supervises required off-season or deferred testing., • Conducts 10-month to 12-month warranty period review., • Develops a pre-warranty expiration report outlining any deficiencies that should be brought to the attention of the representative contractor(s) prior to warranty expiration., • Documents building current operating conditions., • Performs site surveys of building systems., • Develops retro-commissioning plans and testing documentation., • Performs system diagnostics and field testing., • Develops a final report addressing results of retro-commissioning process and recommendations for system improvements., • Provides owner training regarding proper system operation and maintenance., • Compiles a client system manual to use as a tool in long term system operation and maintenance., • Bachelor or Associate of Applied Science Degree preferred., • Eight years of experience in project commissioning or design., • Possesses at least one Professional Commissioning Accreditation., • The compensation range for this position is $87,360 to $120,000 per year. M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR FAoDZjV1Vj

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for a Commissioning Agent in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Group Manager to finalize Project Scope and Schedule of tasks and deliverables., • Is assisted on projects by other Engineers and/or Designers., • Assembles commissioning team and holds a scoping meeting to identify responsibilities for all parties., • Develops commissioning plan and update as required., • Chairs commissioning meetings as required., • Reviews the owner objectives documentation for clarity and completeness., • Coordinates the commissioning work during all phases of the project., • Conducts reviews of the design, drawings, and specifications at various stages of development., • Develops a design review report including all design related comments, suggestions, recommendations, and cost implications., • Develops project commissioning specifications., • Reviews and accepts contractor submittals applicable to systems being commissioned., • Reviews trade coordination drawings or building model., • Develops and distributes pre-functional checklists., • Reviews and comments on contractor start-up and initial systems checkout plan., • Performs site visits to observe project progress and attend selected jobsite meetings., • Witnesses and documents HVAC piping pressure test and flushing., • Witnesses and documents ductwork testing and cleaning., • Documents construction checklist completion., • Documents systems startups., • Reviews air and water systems balancing reports., • Develops functional performance test procedures for equipment and systems to be commissioned., • Verifies accuracy of air and water testing and balance reports., • Analyzes D.D.C. system trend logs., • Coordinates, witnesses and documents functional performance tests performed by installing contractors., • Maintains a masters issue log., • Reviews equipment warranties and convey owner's responsibilities., • Oversees and approves the training of the owner's personnel., • Reviews and accepts the operating and maintenance manuals for commissioned equipment., • Compiles a commissioning record, which includes a summary report, listing of all outstanding non-compliance items along with recommendations for improvements. Each non-compliance issue shall be referenced to the specific functional test, inspection, trend log, etc., where the deficiency is documented., • Includes Issues log, commissioning plan progress reports, submittal and operating and maintenance manual reviews, training record, test schedules, construction checklists, start-up reports, functional test procedures, and trend log analysis., • Coordinates and supervises required off-season or deferred testing., • Conducts 10-month to 12-month warranty period review., • Develops a pre-warranty expiration report outlining any deficiencies that should be brought to the attention of the representative contractor(s) prior to warranty expiration., • Documents building current operating conditions., • Performs site surveys of building systems., • Develops retro-commissioning plans and testing documentation., • Performs system diagnostics and field testing., • Develops a final report addressing results of retro-commissioning process and recommendations for system improvements., • Provides owner training regarding proper system operation and maintenance., • Compiles a client system manual to use as a tool in long term system operation and maintenance., • Bachelor's or Associate's Degree of Applied Science preferred., • Four years of experience in project commissioning or design., • Possesses at least one Professional Commissioning Accreditation. Powered by JazzHR dE46jvVaCd

Job DescriptionManager, Mechanical Engineer Description If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Responsibilities • Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations., • Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs., • Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA., • Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite., • Ability to work in a team and communicate effectively both written and verbally., • BS in Mechanical Engineering/Engineering Technology, • NYS PE required, • 10+ years of post-college experience., • Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection., • Professional in-office environment, • The job requires prolonged periods of sitting at a computer., • Travel may be required within NY State. We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/04/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: A Maintenance Coordinator maintains supplies for all departments so they can meet production schedules and machines are kept in a good operating manner. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Purchasing: Purchase maintenance repair, and operational supplies for all departments, and occasional capital expenditure items. This includes researching parts, checking pricing, placing orders, entering purchase orders, tracking fulfillment, and solving invoice problems. When items deemed hazardous are purchased, obtain SDS information and forward it to the central filing system., • CMMS Maintenance and Administration: Regularly monitor and maintain the computerized maintenance management system, including administration of modifications and reporting as directed by engineering., • Inventory: Inventory Control includes putting parts away in the proper location, matching the receiver with the purchase order, and updating inventory daily by adding newly received or subtracting parts used for repairs from the database., • Physical Inventory: Adding parts to the database and completing physical inventory audits, including correcting the proper location, vendor, description, or part number., • Electronic Work Order Maintenance: Produce work order reports for department managers and supervisors to review. Generate weekly all scheduled preventative maintenance work orders and add new PMs or edit existing PMs, including tasks and schedules as needed., • Commitment Logs: Maintain the capital expenditure equipment logs, charitable contribution logs, contractor logs, and any insurance logs as necessary., • Calibrations: Facilitate all department calibration schedules, including entering and maintaining data with the specified calibration software., • Repairs: Manage items that must be sent for repairs by obtaining vendor quotes, obtaining manager approval or replacement, issuing purchase orders, preparing paperwork, packaging, arranging transportation, daily tracking, and monitoring to ensure timely returns and repairs., • Documentation: Accurate, timely, and organized documentation or filing of all related and necessary paperwork. Maintaining equipment manuals, manufacturer spec sheets, standard operating procedures, and updated maintenance or equipment documentation., • Meetings: Maintain agenda and meeting minutes for department and capital expenditure meetings., • Vendor Management: Meet with vendors and suppliers to review products or proposals and present them to the Plant Engineer, Maintenance Supervisor, or other department managers for consideration., • Bids: Obtain bids for ancillary plant services such as vending, janitorial, first aid supplies, and uniforms, procure these services, and establish schedules around production., • Purging Files: Purge purchase orders and call on any outstanding balances. Purge year-end work orders and purchase orders., • Monitor Timecards: Reconcile and correct maintenance electronic timecard entries for accuracy before payroll deadlines. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. While doing inventory you stand, climb, stoop frequently. While putting parts away you lift parts that usually weigh 1lb. to 35lbs. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job DescriptionDescription: Lead transportation projects, grow our regional presence, and advance your engineering career Fisher Associates is seeking a Senior Transportation Project Manager to lead high-impact highway and bridge design projects across the Harrisburg, Philadelphia, and Allentown corridor. This role offers a unique opportunity to help expand our presence in a key growth market while shaping the future of transportation infrastructure in Pennsylvania. Are you a licensed Professional Engineer (PE) or an Engineer-in-Training (EIT) nearing licensure? Join our mission-driven, multidisciplinary team and make a lasting impact through innovative civil and structural engineering solutions. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Remote #LI-CA1 Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years transportation design engineering and project management experience, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills, • Proficiency in MS Office; MicroStation preferred, • Familiarity PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Join our team as a Highway Project Engineer and take the lead in designing, constructing, and maintaining vital transportation infrastructure! In this dynamic role, you'll combine engineering expertise with project management skills to ensure safe, efficient roads and highways. You'll tackle specialized design tasks and oversee small projects from start to finish, all while ensuring compliance with industry standards and codes. If you're ready to drive impactful projects and shape the future of transportation, we want to hear from you! Why Fisher Associates? At Fisher Associates, we believe in cultivating our gifts to create a legacy of infrastructure that improves the quality of life. Our work shapes communities, enhances sustainability, and creates meaningful connections that last for generations. • Be Heard, Be Valued – We foster an inclusive culture where leadership welcomes your ideas and feedback., • Collaborate & Innovate – Work with a highly skilled, multidisciplinary team on diverse and impactful projects., • Career Growth – Advance with clearly defined career paths, tuition assistance, and ongoing training., • Work-Life Balance – Enjoy a flexible hybrid schedule, optional half-day Fridays, and generous PTO., • Competitive Benefits – We offer a robust benefits package including immediate 401(k) enrollment with annual company contributions, comprehensive health insurance options and company-paid life and long-term disability insurance. Who We Are: Fisher Associates, P.E., L.S., L.A., D.P.C, is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. All services are delivered through the firm’s signature “Clientship” philosophy, which emphasizes not only customized, innovative quality solutions but also an exceptional client experience driven by clear communication, deep expertise, and proactive client advocacy. Salary Range: $48.08-$62.50 Hourly Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Essential Functions • Effectively complete work assignments related to highway design, drainage design, alignments, and other duties applicable to these projects., • Develop preliminary and detailed final design plans and cost analysis for new highway projects or improvements to existing infrastructure that meet client’s goals., • Ensure designs adhere to safety standards, local regulations, and best practices., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • Coordinate with reviewers and other disciplines to ensure accuracy and quality of work., • Attend routine project design meetings and coordinate regularly with the technical staff, to complete the project within the assigned project budget and on schedule., • Provide mentoring, direction and oversight to internal design staff., • Assist Project Manager with project presentations, proposed project schedules and development tasks assigned by the Project Manager. #LI-Hybrid Requirements: Education & Experience • B.S. degree in Civil Engineering or related field (MS preferred), • 10-15 years minimum of transportation experience, highway engineering experience preferred., • Professional Engineering License required., • Uphold professional performance standards aligned with the company’s Mission, Vision, and Core Values., • Build and maintain strong client relationships in adherence to the Fisher Clientship philosophy., • Demonstrate high-quality work and a commitment to continuous improvement., • Collaborate effectively across all levels, fostering respect, trust, and active listening in all interactions., • Take ownership of responsibilities and outcomes with integrity, honesty, and transparency., • Exhibit a proactive, self-motivated attitude with a strong desire to learn and grow., • Apply critical thinking and problem-solving skills while demonstrating sound judgment., • Communicate professionally and effectively in both written and verbal formats., • Manage projects, time, and tasks efficiently in a fast-paced environment., • Maintain strong attention to detail while adapting to changing priorities., • Accept and respond positively to feedback. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Transportation Highway Group Manager – Civil Engineering Rochester, NY/ Hybrid Lead with Purpose. Design What Moves Communities. Fisher Associates is hiring a Transportation Highway Group Manager, an experienced Civil Engineer to lead the technical design of impactful highway and roadway projects across Upstate New York. If you're driven by engineering excellence, mentorship, and meaningful work, this is your opportunity to grow and make a difference. In this senior technical role, you’ll guide design development, ensure high-quality deliverables for clients like NYSDOT and local municipalities, and mentor junior engineers within a collaborative team environment. At Fisher Associates, we value innovation, integrity, and leadership. Join a firm where your skills are recognized and your career can thrive. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Deliver transportation projects that improve mobility, safety, and quality of life in local communities., • Foster a high-performing, motivated team through clear expectations, constructive feedback, mentoring, and career development., • Oversee the design and execution of highway engineering projects, ensuring compliance with industry standards, regulations, and client requirements., • Serve as a technical lead, guiding the team on best practices, decisions, and troubleshooting as needed., • Implement and oversee quality control processes and conduct technical audits to ensure high standards., • Maintain effective communication with project managers, clients, and cross-functional teams., • Ensure effective resource allocation, adequate staffing, and utilization to meet project and team goals., • Assist in recruiting top engineering talent who align with the team’s technical excellence and company culture., • Lead continuous improvement initiatives to enhance team performance., • Stay current with transportation design trends and emerging technologies, integrating them into project solutions. Your Impact Matters, Your Career Thrives. Work on engaging transportation projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Transportation Group Highway Manager • B.S. degree in Civil Engineering, • 8-15 years’ experience in civil transportation engineering, • Professional Engineering License (PE) preferred or ability to obtain it, • Prior staff management preferred, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for a Mechanical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR wWoIey1Uza

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for an Electrical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimations., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 0L6PZVARCg

Job Description We are currently looking for a P & C Engineer with a minimum of 5 years of experience in protection and control system detailed design, cost estimating, and bid document preparation for commercial, industrial, generation, renewables, and utility power systems. Duties • Create/modify one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, and cable lists for substations, relay settings and configuration files., • Design auxiliary AC and DC power systems., • Create/modify technical specifications for major equipment, such power transformers, power circuit breakers, control house, panel construction specification and other high-voltage substation related materials;, • Coordinate with and provide technical assistance to SCADA engineers, substation physical engineers, and control design staff in order to fully develop system integration of protection, control, and monitoring systems;, • Perform basic calculations such as voltage drop, CT burden and saturation, lighting, and short circuit with minimal supervision;, • Apply field mark-ups of project as-built drawings with minimal supervision;, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • Provide leadership, guidance and instruction to less experienced staff members;, • Take personal responsibility for the quality and accuracy of one's work;, • Panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations)., • Comfortable evaluating/reviewing control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as relay setting coordination., • A Bachelor’s Degree in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bid document preparation for medium voltage electrical power projects., • A PE license from a US State (NC and NY) is preferred., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Desired knowledge in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering Laboratories, General Electric and Basler equipment., • Periodic travel, ability to visit project sites., • Desired software knowledge in:, • ASPEN or similar, • Doble, • AutoCAD, • SKM, • ETAP Salary Range: $90,000 - $117,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job Description Project Manager – Precast Transportation and Underground Structures Design | Civil Engineering Lead Precast Projects That Move Communities Forward Are you a skilled Civil Engineering Project Manager with experience in precast concrete design for transportation infrastructure and underground structures projects? Fisher Associates is seeking a Project Manager to lead precast projects from concept through completion. In this role, you'll manage client relationships, guide multidisciplinary teams, and ensure the quality and accuracy of precast design deliverables. You'll be part of a collaborative, people-first culture where your leadership drives results and your growth is supported. At Fisher, your voice matters and your work makes an impact. Apply today to lead meaningful projects and bring innovative transportation solutions to life. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher · You are empowered to achieve exceptional results through collaboration and ownership. · Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback. · Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development. · You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day. · Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others. · Your success is supported by our flexible work environment empowering you to thrive both professionally and personally. What You’ll Do as a Precast Project Manager · Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. · Successfully lead projects from initial setup through planning, safety analysis, and project kick-off. · Manage project budgets, scope, schedule, and staffing to stay on plan. · Oversee project billing, client updates, QA/QC of deliverables, and project closeout. · Lead transportation and underground structures precast design projects, ensuring compliance with industry, regulation, and safety standards. · Support the preparation of project proposals by collaborating with senior staff and technical teams. · Coordinate with design teams to develop detailed plans, specifications, drawings and bid packages. · Perform technical reviews and provide guidance to resolve design challenges. · Manage a project team, fostering a collaborative and productive work environment. · Assign tasks, monitor progress, and provide guidance to ensure project milestones are met. · Mentor and develop team members to enhance their technical and professional skills. What We Offer Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program · Engage with dynamic groups such as the Community Impact and Fun Committees, Fisher Minds (ERG), and the Employee Advisory Group Salary Range $95,000-$130,000 Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. What You Bring, Your Expertise as a Precast Project Manager · Precast project management experience · Professional Engineering License (PE) preferred or ability to obtain it · Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO and IBC codes • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • Embrace feedback constructively and use it as an opportunity for growth. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local law.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Christa Construction – Customer Satisfaction through Quality, Service, and Value!! Christa promotes an environment of professional development and creative thinking that demonstrates our commitment to hiring and retaining the best people in the industry. Our team comes first, it’s known through our multiple awards such as Greater Rochester Chamber Top 100 Companies and Rochester’s Top Workplaces. As an employer, we’re focused on your growth in the company. From leadership development programs, state-of-the-art technology and an open-door policy to learn from each other, you own your personal growth and impact in the company as well as your career. We thrive on our outstanding client service and expertise. We are trying to ensure we are bringing the right kind of individual to join our team. • Does your work ethic typically outshine the ones around you?, • Do you know that you have the skills to impress, and the drive to deliver the highest quality in every situation?, • Is your history bursting with examples of your personal and professional success?, • Are you ready to catapult your career alongside the top professionals in the business?, • Are you the next best thing to happen to Christa? Let’s chat and see! Core Values: Christa’s Core Values inform our decisions and actions at all levels. They serve as ‘guard rails’ for behavior between employees, clients, subcontractors, suppliers, and other stakeholders. Communicating Christa’s Core Values and ensuring everyone internalizes them is essential to fostering and maintaining our amazing culture. Christa cares about: • Integrity: Clients, suppliers, employees, and communities we serve know we build with integrity., • Safety: We prioritize safety every day, on every job site., • Ownership mindset: We are responsible for our actions and accountable for results. Treat every project like it is your own., • Quality: We build every project with quality, exceptional service, & innovative construction methods., • Communication: We understand clients’ expectations, then deliver with clarity and transparency to the entire project team., • Balance: We are committed to hard work, balanced with creating time for family, friends, and fun. How will working for Christa benefit you? Not only will you be a part of a wonderful team of industry-leading professionals, but Christa offers great benefits including: Health Dental and Vision, generous 401K matching, PTO, Life & LTD, Tuition Reimbursement, Career Training and Development support, Valuable experience, and more! A successful Project Manager at Christa will provide project leadership while promoting Customer Satisfaction through quality, service and value. ESSENTIAL FUNCTIONS: • Supervises and directs the overall project. Duties include planning and coordinating activities with others; circumventing/resolving problem areas; and ensuring all company/project policies, procedures, and standards are maintained., • Achieves customer satisfaction by meeting or exceeding customer expectations. Customers include owners, architects, contractors, subcontractors, vendors, and employees., • Manages, directs, organizes, coordinates, and schedules the work of staff in their respective corporate divisions, • Ensures that projects are being managed effectively and are effectively operated, • Is responsible for the profitability of assigned projects and the completion of work per schedule and utilizes corporate standard operating procedures to accomplish this goal, • Solicits, purchases, writes, and manages contracts, contractors, and vendors in the execution of work, • Responsible for developing the financial schedule of values inclusive to the overall project budget., • Prepares and distributes payment applications on a monthly basis, • Tracks all project costs and prepares monthly cost to complete reports, • Cost codes all project invoices, • Solicits, procures, and manages the labor, material, and equipment necessary to execute the work of several projects, • Actively participates in the solicitation and procurement of new and future employees, • Ensures that standard administrative operating procedures are being complied with, • Creates, updates, and monitors construction schedules using Microsoft Project and adheres to company scheduling standards and practices, • Creates and submits all project RFIs and submittals, • Prepares and distributes all project meeting minutes, • Manages and maintains all changes to projects by posting drawings, updating Project Sight and creating as-built drawings, • Manages the closeout process at the end of projects to submit to appropriate parties, • Trains, mentors, and motivates the Assistant Project Manager and/or Project Engineer assigned to their projects QUALIFICATIONS & RESPONSIBILITIES: Top candidates will have 5-10 or more years of commercial construction project management experience (preferably in wood frame multi-family projects) and should be able to lead multiple projects. They will also take ownership of the project success with special consideration to schedule and budget adherence, and have the personal attributes to manage, direct, mentor and support employees through their daily work while demonstrating Christa’s corporate philosophy of outstanding business ethics and principles. Top candidates will also have advanced skills in the use of technology including MS Office products, PROCOR, and P6/Oracle. Advances skills in comparable programs will be considered equivalent. Project Managers typically have a range of physical requirements, including: • Mobility: Ability to move around job sites, which may involve climbing stairs, ladders, or scaffolding., • Stamina: Capability to work long hours, often on-site, which can include standing for extended periods and walking significant distances., • Vision: Good eyesight for reading blueprints, plans, and safety signage, as well as inspecting work., • Hearing: Ability to hear instructions, warnings, and safety alerts in a noisy construction environment., • Manual Dexterity: While not as hands-on as other roles, project managers may need to use tools or equipment occasionally, so basic manual skills can be beneficial., • Strength: While not always required, some physical strength may be necessary for tasks like lifting or carrying equipment, especially during site visits., • Coordination: Good hand-eye coordination is useful for tasks that require writing, reviewing plans, or interacting with technology., • Safety Awareness: Understanding and adhering to safety protocols is crucial, as construction sites can pose various hazards. Compensation for qualified candidates is determined by multiple factors including but not limited to verifiable experience, education, and technical skills. The pay range for this position is: $55-$100k annually Nestled on the shores of Lake Ontario, Rochester, is a vibrant city known for its rich history, dynamic economy, and diverse cultural scene. With a legacy of innovation and a strong sense of community, Rochester is the perfect place to live, work, and explore. The city boasts a history of groundbreaking achievements in technology and industry. As the headquarters for several major companies, Rochester continues to thrive as a center for innovation, research, and development. Rochester’s diverse economy includes strong sectors in healthcare, education, manufacturing, and technology. The region offers numerous opportunities for businesses and entrepreneurs, supported by a collaborative environment and a skilled workforce. You can also experience the arts and culture of Rochester through its world-class museums, theaters, and music venues. The George Eastman Museum, Rochester Philharmonic Orchestra, and the Strong National Museum of Play are just a few highlights of what is offered. Rochester is also home to an array of parks and outdoor spaces, including the scenic Highland Park and the picturesque Genesee Riverway Trail. Enjoy outdoor activities, festivals, and seasonal events throughout the year. Finally, Rochester is renowned for its high-quality educational institutions. These institutions drive research, innovation, and a culture of learning. Company DescriptionAffordable housing and apartmentsAffordable housing and apartments

Job Description Engineering Program Manager Department: Product Design Services FLSA Status: Exempt Reports to: Operations Manager, Product Design Services Pay Range: $101,100 - $146,700 annually Location: Rochester, NY The Role: D3 Embedded is seeking a skilled and experienced Engineering Program Manager to act in the role of Chief Engineer where they will lead a team of Engineers to design and develop and cutting-edge embedded systems. The systems are end-to-end solutions containing; sensors, cameras, mmWave Radar, connectivity, embedded processing and Artificial Intelligence (AI) for performance critical applications. The ideal candidate has experience with Embedded Realtime Operating Systems (RTOS) like Embedded Linux, digital imaging, electronics design, software architecture and development, computer vision and machine learning. This position requires strong problem-solving skills, the ability to mentor and guide engineering teams. The Responsibilities: • Lead a project team to develop and an embedded system and realize the solution using company core process, • Collaborate with key stakeholders to define program scope, timing, and deliverables and use them to execute the program and track progress, • Coordinate multi-disciplinary project team leads, • Manage project to milestones (Schedule and Outcomes), • Manage resources including; teams, budgets, and schedules, to maximize customer satisfaction, and project profitability, • Identify, assess, and mitigate risks that may affect program delivery, • Act as the technical decision maker driving complex technical decisions across multiple teams (Facilitates the discussion to define “done”), • Provide primary technical communication with project team and project stakeholders, • Maintain effective communication channels to keep stakeholders updated on project progress and changes, • Facilitate technical and stakeholder meetings, • Responsible for making sure the right people are on each task and the tasks are understood by the team, • Collaborate with management and technical teams on product strategies, • Prep and lead gate/design reviews and provide technical oversight, • Develop and finalize requirements, • Develop electrical and mechanical block diagrams, and high-level software architectures to meet requirements and guide design trade-off decisions, • Provide estimations for next phases of a current project using change requests, • Maintain project documentation, including plans, schedules, budgets, and status reports., • Requestor for Materials purchases and shipments for projects, • Approver for Design Releases (Arena ECOs), • Own the full life cycle of new products/solutions from proof of concept to integration with other components and teams, • Lead and/or participate in all phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • implementing software, • software/hardware integration, • verification and validation, and customer support, • Develop & identify tools / methods for better design reuse & process improvement Other duties as assigned The Right Person Will Have (Required): • 3+ years of experience working as a Technical Lead, Technical Project Manager, or Program Manager for both hardware/software projects., • Bachelor of Science Degree in Software Engineering, Electrical Engineering, Computer Science, Computer Engineering or a related field., • 5+ years of industry experience, • Experience with System Requirements Documentation, Requirements Allocation, Requirements Traceability, and Test Case development and execution. Experience with product and component-level FMEAs., • Self-driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills The Right Person Will Have (Preferred): • Master of Science or PhD in Computer Vision, Machine/Deep Learning, Computer Science, Computer/Electrical/Software Engineering, or a related field., • Experience with autonomous/industrial robotic platforms and applications, • Experience with embedded and edge processing platforms (Nvidia Jetson devices, Qualcomm Snapdragon devices, and Texas Instrument Jacinto devices in particular), • Experience with edge AI (accelerators, integration, model conversions, deployment, profiling, etc.), • Knowledge of intrinsic and extrinsic calibration procedures for multi-modal sensor systems, • Experience with sensor fusion techniques (calibration, early, mid, late fusion, etc.), • Knowledge of camera optics and computational geometry, • Gstreamer experience, • Robot Operating System (ROS) experience, • Experience with version control systems such as GIT and DVC, • Experience with GPU programming frameworks such as OpenCL and CUDA, • Experience with Embedded Real-Time Operating Systems (RTOS) and Embedded Linux The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit . D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR eptdMFVp5b

As a GTM Engineer Manager at Clay, you'll lead and scale a team of Go-To-Market Engineers who combine technical expertise with a passion for helping customers unlock Clay's full potential. You've had 4+ years of leading GTMEs, AEs, Solutions Engineers, Sales Engineers, or similar customer-facing tea

Job Description M/E Engineering (is now Salas O’Brien Consulting and Engineering Group of New York, Inc.) is interviewing for an Electrical Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop the skills of the Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Associate and/or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate Degree, Bachelor of Science Degree, or equivalent combination of education and experience. Powered by JazzHR uTZmuQFZiU

Title: Operations Manager- Traffic Control Classification: Exempt About the Organization RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. Position Summary: As an Operations Manager, you will be primarily responsible for managing

Manages patient care in home therapies programs while maintaining cost-effective clinical operations.Provides direction and guidance to the interdisciplinary team providing care to the Home Therapies patients to ensure that the highest standard of care is provided.Collaborates with the Business Unit

The Assistant Project manager is accountable for ensuring that customer service is delivered by hiring, training, supervising, and coordinating employees engaged in cleaning and maintaining facilities in his/her assigned account(s) in accordance with contract specifications. Assist the Project Manag

Manages patient care in home therapies programs while maintaining cost-effective clinical operations.Provides direction and guidance to the interdisciplinary team providing care to the Home Therapies patients to ensure that the highest standard of care is provided.Collaborates with the Business Unit

Engineering, a minimum 2 years Nuclear experience or related engineering experience Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Engineering, a minimum 5 years Nuclear experience or related engineering experience.

Skills and Experience: Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). Job Description: We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, a

Bachelor&rsquos degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) with 2 years of nuclear or related engineering experience. Bachelor&rsquos degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) with 5 year

Job Description: We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. Skills and Experience: Required Qualifications: Bachelor’s degree in Elec

Bachelor&rsquos degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) with 5 years of nuclear experience or related engineering experience. Bachelor&rsquos degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear)

The End User Computing Manager/IT Manager is responsible for providing exceptional end-user experience and driving operational efficiencies while staying current with technology and security best practices.

Bachelor&rsquos degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) with 2 years of nuclear or related engineering experience. Bachelor&rsquos degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) with 5 year

The Golisano Institute for Business & Entrepreneurship is seeking a passionate and collaborative IT Operations Manager to join our innovative technology team.

Bachelor&rsquos degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) with 5 years of nuclear experience or related engineering experience. This Engineering role can be filled at the Entry, Mid-level or Senior Engineer level. Bachelor&rsquos degree in en

Plastics, Injection Molding, Manufacturing, Production, Operations, Lean Manufacturing, Six Sigma, 5S, Continuous Improvement, KPIs, Root Cause, RCA, Safety, Quality, Industrial Engineering, CNC, Process Engineering, Mechanical, Industrial, Kaizan, Production Manager, Plant Operations, Supervisors,