Trabajos Engineering en Latham, New YorkCrear alertas

Job DescriptionJob Title: Field Service Engineer II – Onsite Reports to: Site Coordinator Classification: Non-Exempt Summary: This position entails the installation, service, troubleshooting and repair of complex electronic and electromechanical equipment, site service, field process applications, and qualifications. In addition, the position is accountable for being able to operate as an independent “product expert” on select EVG product lines. Capable of assisting in the implementation of detailed, complex customer installation plans for reliability, process qualification, and sign-off. Training customer personnel on advanced equipment operation, maintenance procedures and process related operations. Provides onsite technical support for development and implementation of equipment and process applications. Trains other Field Service Engineers on specific product lines. Essential Duties and Responsibilities: To perform this job successfully, the individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. • Provides professional and courteous service to customers with a primary goal of complete customer satisfaction., • Assists customers and other personnel in identifying and repairing equipment related process problems., • Performs onsite preventative maintenance, clean equipment as required and verify the operational quality of equipment., • Performs start-up, warranty, paid service, and service contract activities. Performs hardware set-up on specified systems within established time frames., • Keeps Management informed of down situations. Documents, logs, and reports activities as required., • Troubleshoots and corrects process variations on systems. Diagnoses sources of hardware or process problems on equipment, facilities, or wafers., • Participates in local customer meetings and communicates orally with customers in face-to-face, one-on-one settings, group settings and communicates professionally by email and telephone, as needed., • Prepares and submits all required paperwork on a timely, routine basis., • Maintains all assigned equipment logs and records promptly and thoroughly., • Records activities clearly in written pass down and communicates clearly face to face when handing work off to oncoming shift., • Complies with all OSHA and Customer Safety requirements. Stays current all prescribed and recurrent training courses for EVG and Customer to maintain uninterrupted access to customer site., • Works overtime and/or travel on short notice, including unscheduled callouts from home and other shifts, as needed., • Must be able to travel domestically and internationally overnight, as needed, up to 20% of the time. Must possess a valid passport., • This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver’s license and have acceptable driving privileges., • Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts), • Assists and completes onsite equipment installations or complex retrofits on equipment and obtains Final Acceptance by the customer., • Ability to utilize training skills to troubleshoot tools to resolve issues and minimize downtime. Keeps equipment running properly and efficiently to enhance customer satisfaction., • Other duties, as assigned. Additional Duties and Responsibilities: • Initiates purchase orders for parts and service., • Maintains and performs repairs on company demo cleanroom equipment., • Keeps informed and trained on company’s most current systems, methods, and procedures, including site safety., • Demonstrates excellent customer service skills (foreign and domestic)., • Exhibits good housekeeping practices in all work areas. Qualifications / Education / Skills and Experience: • This position requires an associate degree or bachelor’s degree in a related engineering field plus two (2) years of experience or up to four (4) years of experience installing/repairing semiconductor/electronic production equipment., • Advanced electromechanical troubleshooting skills., • Knowledge of quality improvement process methods and terminology., • Ability to identify and solve advanced process-related system problems., • Ability to communicate and demonstrate professional conduct with all levels of customers, management, and coworkers., • Must have advanced PC skills (Windows, MSOffice suite)., • Kepner-Tregoe Problem Solving and Decision Making training, preferred. Physical Demands: • While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally., • Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 75% of the time. This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. PI7f030ead064f-25405-39908083

Company Overview: Adesta(TM), an Allied Universal® company, specializes in the design and implementation of modern communications networks and infrastructure for public and private customers. Working in a fast-paced dynamic environment, join a team that creates meaningful and measurable solutions based on customers' project goals and budgets. Adesta not only offers engineering, technical, and management expertise of an established systems integrator, we also back our expertise with dependable maintenance support and training. Adesta, an Allied Universal® Company, is hiring a Technician I. The Technician I - Telecom is responsible for identifying underground utilities, construction oversight, general building maintenance, and reporting. Pay Range: $22/hr-$28/hr RESPONSIBILITIES: • Provide support for building inspections and maintenance of systems including but not limited to; 48VDC, UPS, HVAC and GenSet, • Utilize working knowledge of installation standards and procedures for fiber optic distribution panels, • General maintenance includes housekeeping, weed-whacking, snow removal, etc., • Observe active construction work and protect existing facilities through routine cable route surveillance, • Coordinate meetings with ROW owners to assess actual and/or potential conflicts with the company's fiber infrastructure; work with other team members to design a modified route, if necessary, • Perform routine inspections, • High school diploma or equivalency, • Valid driver's license, if driving a company or customer-owned vehicle, • Minimum of two (2) years of work experience with telecommunications systems, • Ability to read, analyze, and interpret engineering and construction drawings and specifications, common scientific and technical journals, financial reports, and other documents, • Communicate effectively in both oral and written English technical language, both in interpreting requirements and providing reports, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Previous experience in construction, telecommunications network maintenance, electrical work, security systems, and/or fiber optic splicing and testing, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . 2026-1550594

You can play an important part in disaster relief missions as a Geospatial Engineer for the Army National Guard. As a Geospatial Engineer, your primary responsibility will be to collect and process military geographic information from decentralized sources (remote sensed imagery, digital data, intel

Our client, a leading organization in facility management services, is seeking a Mobile HVAC/Maintenance Technician to join their team. As a Mobile HVAC/Maintenance Technician, you will be part of the Maintenance Department supporting multiple site locations. The ideal candidate will demonstrate strong problem-solving skills, reliability, and a proactive approach, which will align successfully in the organization. Job Title: Mobile HVAC/Maintenance Technician Location: Menands, NY What's the Job? • Perform ongoing preventive maintenance and respond to repair work orders on facility mechanical, electrical, and other installed systems., • Maintain, operate, and repair HVAC systems and related equipment, electrical distribution, plumbing, and building structures., • Conduct facility inspections and report on conditions affecting client occupancy and operations., • Respond effectively to emergency situations to ensure safety and operational continuity., • Minimum of four (4) years of technical experience in building engineering, with a focus on HVAC, plumbing, and electrical systems., • Universal EPA 608 Certification is required., • Valid state driver’s license and ability to lift up to 80 lbs. and climb ladders up to 30 ft., • Willingness to support after-hours activities and overtime as needed., • Opportunity to work in a dynamic environment supporting multiple sites., • Tools and resources provided to perform your duties effectively., • Potential to develop your skills through ongoing training and experience., • Supportive team environment focused on safety and excellence., • Medical and Prescription Drug Plans, • Dental Plan, • Vision Plan, • Health Savings Account, • Health Flexible Spending Account, • Dependent Care Flexible Spending Account, • Supplemental Life Insurance, • Short Term and Long Term Disability Insurance, • Business Travel Insurance, • 401(k), Plus Match, • Weekly Pay If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

NYSTEC is a nonprofit technology consulting company, advising agencies, organizations, institutions, and businesses since 1996. We're independent and vendor-neutral, so we have our clients' best interests at heart. At NYSTEC, we know that we succeed when individuals and teams flourish personally and professionally, so our benefits and perks support that mindset. As a Salesforce developer in the Emerging Technology Services practice area, you will serve as the technical lead during the implementation of Salesforce by an external system integrator for our clients and will transition to owning the platform for maintenance and ongoing enhancements after go-live. Serving as a Salesforce developer, your day-to-day role as a NYSTEC consultant will involve overseeing solution design, configuration, integration, and data architecture during implementation and later providing hands-on configuration, development, release management, and support. You will collaborate with internal teams and client stakeholders to guide digital transformation, ensure scalable architecture, and enable effective adoption of Salesforce-based low/no-code solutions. This position requires onsite work in Albany, NY. To be considered for this role, candidates must be permanent residents of the state of New York and reside within a commutable distance. • Serve as the primary technical liaison between client stakeholders and the external Salesforce implementation partner., • Review and validate vendor solution designs, data models, and custom code to ensure long-term maintainability and that best practices are followed., • Participate in requirements workshops, design sessions, sprint reviews, and user acceptance testing (UAT) activities., • Ensure that architectural decisions align with business strategy, security requirements, and compliance standards., • Identify risks, recommend mitigation strategies, and escalate issues when necessary., • Provide post-implementation support and enhancements., • Assume ownership of the configured Salesforce environment after go-live., • Perform ongoing configuration, customization, and development, including Salesforce Apex, Lightning Web Components (LWC), flows, and integrations., • Evaluate change requests, manage enhancements, and oversee release management., • Conduct platform health checks, performance optimization, and user access/security management., • Train users, support adoption, and serve as the primary Salesforce subject matter expert., • Provide guidance and mentoring to internal product owners, analysts, and technical team members., • Hands-on Salesforce development and configuration experience., • Proficiency in:, • Salesforce Apex (classes, triggers, test classes)., • LWC and/or Aura., • Salesforce flows and process automation., • Data modeling, security, and sharing rules., • Experience with representational state transfer/Simple Object Access Protocol (REST/SOAP) application programming interface (API) integrations and/or middleware (e.g., MuleSoft, Boomi)., • Proficient understanding of SDLC and Agile delivery frameworks., • Excellent written and verbal communication skills and ability to engage business and technical stakeholders., • Strategic thinking skills with the ability to translate business needs into technical design., • Ability to lead technical discussions and influence design and implementation decisions., • Self-starter able to work independently and in collaborative team environments., • Salesforce Platform Developer 2 certification., • Salesforce Administrator or Business Analyst certification., • Experience transitioning solutions from vendor implementation to in-house maintenance., • Experience in public sector or healthcare environments., • A bachelor's degree in computer science, data science, mathematics or a similar discipline and at least eight years of related experience. It is NYSTEC's policy to provide equal employment opportunity (EEO) to all individuals, regardless of actual or perceived race, color, creed, religion, sex, or gender (including pregnancy, childbirth, and related medical conditions), gender identity or gender expression (including transgender status), age, national origin, ancestry, citizenship status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, military service and veteran status, sexual orientation, marital status, or any other characteristic protected by local, state, or federal laws and ordinances. NYSTEC is strongly committed to this policy and believes in the concept and spirit of the law. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please contact ___ if you require a reasonable accommodation to apply for or to perform this job. Examples of reasonable accommodation include making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment. Applicants must be authorized to work in the United States without the need for visa sponsorship now or in the future. Learn more about NYSTEC by visiting ___. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

NYSTEC is a nonprofit technology consulting company, advising agencies, organizations, institutions, and businesses since 1996. We're independent and vendor-neutral, so we have our clients' best interests at heart. At NYSTEC, we know that we succeed when individuals and teams flourish personally and professionally, so our benefits and perks support that mindset. As a quality assurance (QA) engineer in the Technology Procurement and Implementation Services practice, you will collaborate with business analysts, developers, business owners, and QA counterparts to validate functionality across complex workflows and system integrations. • Design and conduct both manual and automated tests to ensure that developed software meets functional and performance requirements, • Develop and maintain technical and user-facing documentation, including user acceptance testing (UAT) strategies and metrics, • Support readiness for go-live and ensure test traceability., • Perform software engineering and quality assurance tasks within complex development environments, applying best practices from related technology fields., • Ensure that software applications meet technical and functional requirements., • Lead test planning, execution, and validation activities across the software development life cycle, including functional, regression, back-end, and end-to-end testing, • Analyze business requirements, perform code reviews, and oversee releases., • Conduct data validation through Structured Query Language (SQL) queries and assist in verifying application and data integration across Oracle and related systems, • Apply Agile or Scrum delivery methodologies to plan, execute, and iterate on development and testing work, • Provide feedback and retrospective demonstrations to developers and stakeholders regarding usability and functionality, • Establish and enforce validation criteria for deliverables, track key testing decisions, trace the completion of requirements through testing artifacts, and secure commitment and approvals from project participants., • At least three- four years of experience with software testing, including developing and executing test cases for web-based applications. Hands-on experience with automation testing tools., • Familiarity with functional, end-to-end, and back-end testing, • Exposure to Agile or Scrum methodologies and basic SQL knowledge for testing relational databases (e.g., Oracle, SQL Server)., • Experience with troubleshooting and debugging test automation failures., • Attention to detail and ability to multitask., • Motivated and willing to work on a collaborative, cross-functional team., • Experience testing, including functional, regression, integration, and UAT of applications, business processes, and data validations, • Experience coordinating or managing end-to-end testing across multiple applications, data flows, and teams, including data migration testing, • Experience with managing/coordinating large testing projects spanning multiple applications, data, and teams, • Experience with automated and manual tests needed to ensure the operation and precision of new product features and overall system behavior (e.g., regression testing), • Experience leveraging tools such as JIRA, Confluence, BitBucket, and Postman and experience with Git, continuous integration/continuous delivery (CI/CD) pipelines, and test automation frameworks (e.g., Playwright, Selenium, Visual Studies and mabl), • Experience with test application programming interfaces (APIs) using Postman or a similar tool to validate functionality, • A bachelor's degree in a computer-science-related field and five years of related experience It is NYSTEC's policy to provide equal employment opportunity (EEO) to all individuals, regardless of actual or perceived race, color, creed, religion, sex, or gender (including pregnancy, childbirth, and related medical conditions), gender identity or gender expression (including transgender status), age, national origin, ancestry, citizenship status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, military service and veteran status, sexual orientation, marital status, or any other characteristic protected by local, state, or federal laws and ordinances. NYSTEC is strongly committed to this policy and believes in the concept and spirit of the law. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please contact ___ if you require a reasonable accommodation to apply for or to perform this job. Examples of reasonable accommodation include making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment. Applicants must be authorized to work in the United States without the need for visa sponsorship now or in the future. Learn more about NYSTEC by visiting ___. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

About Us: NYSTEC is a nonprofit technology consulting company, advising agencies, organizations, institutions, and businesses since 1996. We're independent and vendor-neutral, so we have our clients' best interests at heart. At NYSTEC, we know that we succeed when individuals and teams flourish personally and professionally, so our benefits and perks support that mindset. About the Role: The endpoint management support engineer will collaborate with team members to provide advanced technical support and expertise, serves as an escalation point that focuses on complex issues, and contributes to the overall endpoint management strategy. You will also be responsible for developing and implementing endpoint management strategies and solutions within the NYSTEC environment, primarily leveraging Microsoft Intune for endpoint management. This includes tasks such as analyzing and troubleshooting complex endpoint issues, implementing security solutions for endpoints, and leveraging expertise in endpoint management tools and technologies, such as Microsoft 365 and Intune. Key Responsibilities: • Troubleshooting and Issue Resolution - Diagnosing and resolving technical problems related to endpoints, including hardware, software, and network connectivity., • Endpoint Management - Managing and maintaining endpoint systems using tools like Microsoft MECM, MDM solutions (Jamf, Intune, etc.)., • Software Deployment and Configuration - Ensuring proper installation and configuration of software on endpoints, including applications and operating systems., • Security and Compliance - Implementing and maintaining security policies and configurations on endpoints to ensure compliance with organizational standards and regulatory requirements., • Documentation and Reporting - Creating and maintaining documentation related to endpoint management processes and procedures, as well as generating reports on endpoint status and performance., • Collaboration - Working with other IT professionals, such as architects, security administrators, and other workload administrators, to implement and maintain the organization's IT strategy., • Automation - Designing and implementing automation solutions to improve the efficiency of endpoint management processes., • Inventory/Asset Management - Maintaining accurate records of endpoint devices and their associated hardware and software., • Manage Helpdesk Tickets - Utilize NYSTEC's internal ticketing system to track, priorities, and resolve user support requests., • After-Hours Support - Team members will periodically be required to provide technical assistance outside of standard business hours, including evenings and weekends., • Travel - Team members will periodically be required to travel to different NYSTEC office locations to provide hands-on technical support for issues that cannot be resolved remotely. About you: Required Qualifications • Microsoft Intune Expertise - Strong understanding of endpoint management technologies, including Microsoft Intune, Windows Autopilot, and other relevant tools., • Operating System Knowledge - Familiarity with various operating systems, particularly Microsoft Windows, Mac OS, Android, iOS, and their interaction with Intune., • Microsoft Entra ID Knowledge - Ability to manage users and groups, conditional access, identity protection, as well as a strong understanding of IAM concepts like RBAC, PIM, SSO, and identity federation., • Security Knowledge - Understanding endpoint security principles, including access control, encryption, and threat detection., • Troubleshooting Skills - Ability to diagnose and resolve technical issues related to hardware, software, and network connectivity., • Communication Skills- Excellent verbal and written communication skills to effectively interact with end-users and other teams within the organization., • Focus on Customer Service - A strong customer service mindset and ability to work closely with end users., • Documentation/Analytical Skills - Strong documentation and critical thinking skills., • Microsoft Certified: Fundamentals, Microsoft 365 Certified: Endpoint Administrator Associate, and Microsoft 365 Certified: Administrator Expert (preferred) Education and Experience • A bachelor's degree in a professional specialty or similar discipline and, • A minimum of four years of IT support, desktop and endpoint administration, application management or related fields. It is NYSTEC's policy to provide equal employment opportunity (EEO) to all individuals, regardless of actual or perceived race, color, creed, religion, sex, or gender (including pregnancy, childbirth, and related medical conditions), gender identity or gender expression (including transgender status), age, national origin, ancestry, citizenship status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, military service and veteran status, sexual orientation, marital status, or any other characteristic protected by local, state, or federal laws and ordinances. NYSTEC is strongly committed to this policy and believes in the concept and spirit of the law. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please contact ___ if you require a reasonable accommodation to apply for or to perform this job. Examples of reasonable accommodation include making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment. Applicants must be authorized to work in the United States without the need for visa sponsorship now or in the future. Learn more about NYSTEC by visiting ___. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

HVCC offers more than 80 degree and certificate programs in three schools: Business and Liberal Arts; Health Sciences; and Science, Technology, Engineering and Math (STEM). Dean of Science, Technology, Engineering and Math HV-MC-9926. Department: Science, Technology, Engineering and Math.

Teach courses in mechanical engineering, mechatronic engineering, or mechanical design. The College of Nanotechnology, Science, and Engineering (CNSE) at the University at Albany seeks a visionary and collaborative leader to serve as Associate or Full professor who will also serve as the founding Ch

The Nanoscale Science and Engineering Department within the College of Nanotechnology, Science, and Engineering at the University at Albany invites applications for a full-time, tenure-track position at the rank of Assistant Professor to begin Fall 2026. Successful candidates will be expected to wor

Mechanical Engineering Technology. MET495: Mechanical Engineering Technology Capstone. Doctorate or Master’s degree with significant professional experience in mechanical engineering technology or related fields.

The Database Engineer will design, implement, and maintain robust database systems while actively supporting enterprise integration initiatives. This role bridges database administration and integration engineering, ensuring seamless data flow across platforms and applications.

Description About Us: NYSTEC is a nonprofit technology consulting company, advising agencies, organizations, institutions, and businesses since 1996. We're independent and vendor-neutral, so we have our clients' best interests at heart. At NYSTEC, we know that we succeed when individuals and teams flourish personally and professionally, so our benefits and perks support that mindset. About the Role: The endpoint management support engineer will collaborate with team members to provide advanced technical support and expertise, serves as an escalation point that focuses on complex issues, and contributes to the overall endpoint management strategy. You will also be responsible for developing and implementing endpoint management strategies and solutions within the NYSTEC environment, primarily leveraging Microsoft Intune for endpoint management. This includes tasks such as analyzing and troubleshooting complex endpoint issues, implementing security solutions for endpoints, and leveraging expertise in endpoint management tools and technologies, such as Microsoft 365 and Intune. Key Responsibilities: Troubleshooting and Issue Resolution - Diagnosing and resolving technical problems related to endpoints, including hardware, software, and network connectivity. Endpoint Management - Managing and maintaining endpoint systems using tools like Microsoft MECM, MDM solutions (Jamf, Intune, etc.). Software Deployment and Configuration - Ensuring proper installation and configuration of software on endpoints, including applications and operating systems. Security and Compliance - Implementing and maintaining security policies and configurations on endpoints to ensure compliance with organizational standards and regulatory requirements. Documentation and Reporting - Creating and maintaining documentation related to endpoint management processes and procedures, as well as generating reports on endpoint status and performance. Collaboration - Working with other IT professionals, such as architects, security administrators, and other workload administrators, to implement and maintain the organization's IT strategy. Automation - Designing and implementing automation solutions to improve the efficiency of endpoint management processes. Inventory/Asset Management - Maintaining accurate records of endpoint devices and their associated hardware and software. Manage Helpdesk Tickets - Utilize NYSTEC's internal ticketing system to track, priorities, and resolve user support requests. After-Hours Support - Team members will periodically be required to provide technical assistance outside of standard business hours, including evenings and weekends. Travel - Team members will periodically be required to travel to different NYSTEC office locations to provide hands-on technical support for issues that cannot be resolved remotely. About you: Required Qualifications Microsoft Intune Expertise - Strong understanding of endpoint management technologies, including Microsoft Intune, Windows Autopilot, and other relevant tools. Operating System Knowledge - Familiarity with various operating systems, particularly Microsoft Windows, Mac OS, Android, iOS, and their interaction with Intune. Microsoft Entra ID Knowledge - Ability to manage users and groups, conditional access, identity protection, as well as a strong understanding of IAM concepts like RBAC, PIM, SSO, and identity federation. Security Knowledge - Understanding endpoint security principles, including access control, encryption, and threat detection. Troubleshooting Skills - Ability to diagnose and resolve technical issues related to hardware, software, and network connectivity. Communication Skills- Excellent verbal and written communication skills to effectively interact with end-users and other teams within the organization. Focus on Customer Service - A strong customer service mindset and ability to work closely with end users. Documentation/Analytical Skills - Strong documentation and critical thinking skills. Understands NYSTEC's mission, brand mindsets, and core values and can put the behaviors into practice. Preferred/Desired Qualifications Microsoft Certified: Fundamentals, Microsoft 365 Certified: Endpoint Administrator Associate, and Microsoft 365 Certified: Administrator Expert (preferred) Education and Experience A bachelor's degree in a professional specialty or similar discipline and A minimum of four years of IT support, desktop and endpoint administration, application management or related fields. An equivalent combination of advanced education, training, and experience will be considered. The target base salary for this position is $73,476 to $95,518 per year. When determining compensation, we analyze and carefully consider several factors, including skill set, experience, location, and job-related qualifications. It is NYSTEC's policy to provide equal employment opportunity (EEO) to all individuals, regardless of actual or perceived race, color, creed, religion, sex, or gender (including pregnancy, childbirth, and related medical conditions), gender identity or gender expression (including transgender status), age, national origin, ancestry, citizenship status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, military service and veteran status, sexual orientation, marital status, or any other characteristic protected by local, state, or federal laws and ordinances. NYSTEC is strongly committed to this policy and believes in the concept and spirit of the law. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please contact if you require a reasonable accommodation to apply for or to perform this job. Examples of reasonable accommodation include making a change to the application process or work procedures, providing documents in an alternate format, using a sign language interpreter, or using specialized equipment. Applicants must be authorized to work in the United States without the need for visa sponsorship now or in the future. Learn more about NYSTEC by visiting . Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Excelsior University is building a pool of part-time faculty and lab instructors to support its hybrid undergraduate Electrical Engineering Technology (EET) program. This posting is for a pool of part-time instructors. Master’s degree in Electrical Engineering, Electronics Engineering Technology,

Job Title: Standard Cell / GPIO Design Engineer (2 nm Technology Node) Team: Enablement / Foundation IP Development Location: Albany (NY), Santa Clara (CA), or Tokyo (Japan) Overview Rapidus Corporation is developing next-generation semiconductor technologies at the 2 nm node and beyond. We are seeking skilled engineers to join our Foundation IP Design Team, focusing on Standard Cell and GPIO (General Purpose I/O) development. Engineers with expertise in circuit design, layout, reliability, or DTCO are all welcome. This position involves close collaboration with process, device, and enablement teams to deliver high-quality, high-performance IP that supports leading-edge logic technologies. Key Responsibilities • Design and optimize standard cells and GPIO circuits (input/output buffers, level shifters, ESD structures, and special cells) for advanced technology nodes., • Perform transistor-level circuit design and HSPICE simulations for performance, leakage, and robustness verification across PVT corners., • Collaborate with layout engineers to ensure design rule compliance, area efficiency, and manufacturability., • Work with process integration and DTCO teams to co-optimize transistor architectures, layout patterns, and reliability structures., • Support characterization and model generation for timing, power, and noise modeling., • Participate in ESD and latch-up design verification, ensuring compliance with foundry reliability standards., • Analyze silicon test results and feedback for model correlation and IP quality improvement., • Cooperate with EDA vendors and PDK teams to validate design enablement and sign-off flows. Required Qualifications • B.S. or M.S. in Electrical Engineering, Electronics, or Microelectronics., • 3+ years of experience in standard cell, I/O, or custom circuit design for advanced CMOS nodes (≤ 5 nm preferred)., • Strong understanding of CMOS device behavior, low-power design techniques, and circuit optimization., • Hands-on experience with EDA tools for schematic design, simulation, and layout verification (e.g., Cadence Virtuoso, HSPICE, Calibre)., • Familiarity with DRC/LVS/EMIR verification flows and reliability checks., • Strong problem-solving, analytical, and cross-functional collaboration skills., • Effective communication and documentation skills in English. Preferred Qualifications • Experience with nanosheet / GAA transistor architectures or FinFET-based IP design., • Familiarity with DTCO and library automation / QA flows (Python, TCL, etc.)., • Experience with test-chip development or IP qualification (Level-1 / Level-2)., • Knowledge of characterization tools (Liberate, SiliconSmart) and Liberty model validation., • Understanding of ESD protection, latch-up prevention, and pad ring integration., • Japanese language proficiency is a plus.

PsiQuantum'smission is to build the first useful quantum computers-machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. Our architecture and approachisbased on silicon photonics. Byleveragingthe advanced semiconductor manufacturing industry-including partners like GlobalFoundries-we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photonsdon'tfeel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. In 2024,PsiQuantumannounced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining-and that now is the time to scale. PsiQuantumalso develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies-including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical-to prepare quantum solutions for real-world impact. Quantum computing is not an extension of classical computing. Itrepresentsa fundamental shift-and a path to mastering challenges that cannot besolvedany other way. The potential is enormous, and we have a clearpathto make it real. Come join us. Job Summary: PsiQuantum is building the world's first commercially viable quantum computer powered by silicon photonics. Our Foundry Engineering team partners with leading semiconductor manufacturers to co-develop advanced silicon-based photonic platforms that enable scalable quantum systems. In this role, you will lead the development and integration of optical interposer and advanced packaging technologies that form the foundation of PsiQuantum's photonic quantum architecture. This work spans wafer-level processing, heterogeneous integration, packaging co-design, and materials development to deliver high-yield, high-performance optical interfaces connecting photonic and electronic subsystems. The ideal candidate will have deep experience in optical interposer process integration, including photonic waveguide integration, optical I/O coupling, and wafer-level packaging. You will collaborate closely with PsiQuantum's design, packaging, and foundry partners to bring next-generation optical interconnect technologies from concept to production readiness. Responsibilities: • Lead the process development and integration of optical interposer modules, including photonic waveguide layers, and precision optical coupling structures., • Develop and qualify wafer-level processes for photonic and optoelectronic integration, including alignment, bonding, and encapsulation for optical performance and reliability., • Define design rules, process assumptions, and wafer acceptance criteria for optical interposer and packaging modules., • Drive co-design across photonic, electrical, and mechanical domains to optimize performance, manufacturability, and yield., • Partner with foundry and packaging vendors to develop optical I/O solutions, such as fiber attach, and photonic-electronic co-packaging., • Analyze inline metrology, optical loss measurements, and defect data to identify and resolve yield limiters., • Establish process controls, statistical methods (Cp/Cpk), and reliability test protocols for new optical and packaging modules., • M.S. or Ph.D. in Electrical Engineering, Materials Science, Applied Physics, or a related field., • 10+ years of experience in semiconductor or photonic process integration, optical packaging, or heterogeneous photonic integration., • Proven experience inoptical interposer development, including silicon photonics, glass/silicon interposer platforms, or wafer-level photonic packaging., • Familiarity withoptical coupling techniques (fiber attach, grating couplers, lens alignment) and low-loss photonic integration processes., • Demonstrated ability to managecross-functional development programs with external foundry and OSAT partners., • Experience withinline optical metrology, wafer-level testing, yield improvement, and defect reduction., • Understanding ofadvanced packaging technologies, including hybrid bonding, chiplet integration, or co-packaged optics, is strongly preferred., • Track record of developing and transferring new process modules from R&D to pilot or production environments. Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to ___. We are not accepting unsolicited resumes from employment agencies.

On-Site Quality Engineer in Albany, NY ADVENT Engineering, a Trinity Consultants Company, is an engineering and consulting firm providing expertise to the pharmaceutical and biotechnology industries. Head-quartered in Dallas, TX with operations in the Eastern US and Canada, our company is involved in almost every facet of global pharmaceutical and biotechnology facility design and process engineering and quality system projects. ADVENT's services include process engineering, automation engineering, project engineering, facility/system design, start up and commissioning, validation and compliance consulting for distinguished and successful biotechnology and pharmaceutical manufacturing companies. The successful candidate will work with a group of Compliance Specialists involved in the creation, tracking, and closure of CAPAs associated with facilities maintenance. Forming and working within cross functional teams is considered an asset. A combination of strong technical aptitude, preventative maintenance experience, and data analysis are the desired skill set. This is an outstanding opportunity to join our growing team! Qualifications: Bachelor’s Degree/Undergraduate degree in Engineering, Biology, or equivalent. At least 5 years of related work experience in a QA or Compliance setting. Requirements: • Acts as a liaison between the Facilities Department and onsite quality and regulatory groups to implement Corrective and Preventative Actions, • Manages and participates in Facilities Department CAPA Program. Ensures that all activities related to CAPAs are performed in a timely manner and in compliance with procedures and regulatory requirements., • Daily monitoring and tracking of CAPAs assigned to the facilities department., • Responsible for all aspects of CAPA ownership including facilitation of cross functional meetings with relevant stakeholders, completion of extension requests where applicable, and submission of evidence to QA., • Initiation and ownership of requests and workflows in Computerized Maintenance Management System (BMRAM), • Attend Weekly Meetings to discuss CAPA progress and escalation of obstacles, including presenting, taking notes, managing agenda items and invites., • Ownership of CAPA Effectiveness Checks including the review and analyzing of relevant data and completing reports documenting findings, • Provides support and training for Facilities personnel on regulatory and quality topics, such as proper documentation procedures and the use of QUMAS. Key responsibilities: • Well-developed communication skills, both verbal and written., • Outstanding Organization skills (required to handle multiple projects concurrently), • Strong data analysis skills (excel, performance metrics)., • Strong GMP background including working knowledge of preventative maintenance principles., • Familiar with a broad range of equipment used in pharmaceutical production, including but not limited to: bioreactors, chromatography skids, centrifuges/separators, air handlers, HEPA.

About This Position: We are seeking Junior Engineers (0-2 years of experience) to complement existing engineering staff in our Highway group. Responsibilities may include: field work, traffic engineering and analysis of roadways, design and layout of project components in 2d and 3d, preparing construction drawings and documents, field observation for adherence to construction plans and specifications, report writing and cost estimating. Proficiency with either AutoCAD or Microstation, Inroads, AutoTurn, Synchro, Vissim and GIS software a plus, but not required. Engineers I/II evaluate, select, and apply standard techniques, procedures and criteria to perform a task or sequence of tasks for conventional types of plans, investigations, or surveys with relatively few complex features under the general guidance of a Project Engineer or Project Manager. Work on small projects or portions of larger projects. Typical projects include highway design, long range transportation planning, and traffic impact studies. Other Possible Essential Job Functions: • Primary data collector in the field., • Perform specific portions of a broader assignment of an experienced engineer., • Perform standard computations or basic engineering analysis., • Maintain equipment inventory., • Attend project meetings with senior staff., • Responsible for basic QA/QC tasks; review of own work, as well as reviewing the work of Junior Engineers and Technicians., • Provide limited supervision to technicians., • Coordination with municipalities/agencies regarding background volumes, accident data, signal timings, etc. Bachelor's degree in engineering from an ABET/EAC accredited program or an approved equivalent. Hourly Pay Range: Albany, NY and Syracuse, NY: $31.50/hour - $39/hour Poughkeepsie, NY: $32/hour - $41/hour Westchester - White Plains, NY: $32.50/hour - $45/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. EducationBachelors of Engineering (required) Experience0 - 1 years: Related Experience (required) Licenses & CertificationsDriver's License (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Developing Advanced Electrical Systems for CNC Precision Machine Tools This Jobot Job is hosted by: Andrew Nguyen Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $90,000 - $120,000 per year A bit about us: We are a leading manufacturer of specializ

Ability to read and interpret engineering drawings and apply GD&T. Our automation systems support railway maintenance facilities as well as other manufacturing industries. Why join us? 90-130k Base! Annual Bonuses! Flex Schedule! 401K Matching! Accelerated Career Growth! Challenging Problems! Job De

Job Details Electrical Design & Engineering Design electrical power distribution systems including medium and low voltage, grounding, lighting, and emergency/backup power systems. Salary: $78,000 - $190,000 per year A bit about us: We are seeking a highly skilled Electrical Engineer (PE) with 4 to 1

In JOPP, the demand typically includes roles such as entry-level software programmer, Java full stack developer, Python/Java developer, data analyst, data engineer, data scientist, and machine learning/AI engineer. In other words, SynergisticIT focuses on building candidates across Java / Full Stack

Job DescriptionDesktop/Workstation Design EngineerEmployment Type: Full-Time, ExperiencedDepartment: Information Technology CGS is seeking an experienced Desktop/Workstation Design Engineer to participate in architecture discussions, system reviews, design planning, and technology roadmap planning for current and future desktop integration efforts. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Acts as the Subject Matter Expert for the development and implementation of the Desktop Operating System (OS) Images. - The candidate engineers’ robust solutions for large-scale deployment of software using OS deployment technologies such as Microsoft Endpoint Configuration Manager (MECM) and the Microsoft Deployment Toolkit (MDT). - Develops tests and implements software distribution packages, to include updates to software applications to be applied to desktops, laptops, tablets, and servers used within the enterprise. - Provides information and recommendations to meet various user-based software requirements. - Strong familiarity with scripting languages such as Powershell and VB script. - Implements server OS deployment methodologies to include automated server build processes. - Provides support for an OS patching infrastructure such as HCL BigFix or Windows Update/MECM that applies mandatory security updates to enterprise systems. - Analyzes, evaluates, and recommends desktop, laptop, tablet, and server hardware. - Performs security related tasks which include, documentation, vulnerability scan review, assessment support, patch management, and auditing as required. Qualifications:- The ideal candidate for this position will possess experience with integrating and upgrading desktops and laptops from the Windows 7 operating system to Windows 10 operating system, upgrading Microsoft and 3rd party applications, and have experience with litigating software such as Ipro and Concordance. - The ability to work independently with only minor guidance is a must. Our team is engineering a Windows 10 image on an Intel based system which will be integrated with Microsoft Exchange 2013, Microsoft Office 2013, and various 3rd party applications. · Windows OS engineering experience· Understanding of the application of security controls on the image· Microsoft Office engineering experience· Integrating anti-virus applications in an image· VPN/Remote access (Cisco Secure Access with RSA a plus)· Windows Scripting experience· Good writing skills Ideally, you will also have:- VB and/or VBA coding experience a plus· VDI/Citrix experience· SMS/SCCM experience a plus· Understanding of PKI· VMWare experience· Litigating software such as Ipro and Concordance Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: $75-90K cb20 is anaward-winning provider of managed IT and audio-visual services, proudly serving organizations acrossNew York, Massachusetts, and the greater New England region. With over 30 years of experience, a team of world-class engineers, and trusted partnerships with the worlds leading hardware and software providers, we deliver confidence, security, and above all "An Experience Above". cb20 won the Albany Business Review Best Places to Work and Albany Times Union Top Places to Work five years in a row. In 2025, cb20 achieved the #1 spot in the over 100 category at the ABR Best Places to Work event. People are cb20's greatest asset. As a Site Lead Support Center Engineer III, you will provide support for managed services customers. This role is responsible for providing customers with technical support, remotely and/or on-site so that they can complete core and essential duties of their roles with functional, required equipment. The candidate should be able to explain features of technical products, answer questions about installation, configuration, upgrades, customization, and usage of technical equipment. A Support Center Engineer applies basic diagnostic techniques to identify problems, investigate causes, recommend solutions to correct common failures, and escalate complex problems when required. Providing a high level of professionalism and day-to-day customer service. Responsibilities: • Acts as an incident and problem manager for major outages., • Is a technical knowledge escalation and subject matter expert point for the on-site team., • Triages and resolves high level escalated tickets., • Develops technical training and mentors on-site team for best practices of the Support Center and Managed Services., • Helps to make customer onboarding run smoothly., • Solve technically complex, strategic, high-profile, or long-running customer issues., • Assists in automation and efficiency practices for Managed Services, • Participates as an on call technical escalation point., • Assists and oversees tool development., • Oversees the customer experience feedback loop., • Participates in solutioning technology for customers that originate in the Support Center., • Works to have technology best practices in place for managed services customers that are included in their service., • Perform triaging, troubleshooting, and support to client via telephone, chat, email support, or tickets., • Document all pertinent end user information in ticketing system., • Provide support for users utilizing laptops, workstations, desktops, iOS, and Android devices., • Provide connectivity support for users devices., • Configure and install software for end user devices such as laptops, workstations, and tablets., • Support the systems and networks of customers., • Provide exemplary customer service., • Perform customer call backs as required., • Using problem-solving and people skills to ensure swift resolutions to technical issues., • Troubleshooting, and diagnosing error messages and failures., • Provide Tier 1, Tier 2, and Tier 3 support., • Ensure system backups are completed., • Create and maintain client and support documentation., • Testing, troubleshooting, and diagnosing error messages and failures., • Install, configure, maintain, and monitor Windows, Linux, VoIP, PC, Storage, Virtual, Mobile, Server, O365/M365, and Network environments., • Configure, deploy, and troubleshoot patching for devices., • Check and troubleshoot backup jobs/engines. Qualifications Requirements/Job Specifications Education: Bachelor's degree or higher in computer science or related field, OR equivalent combination of education and work experience.MCSE\MCITP certificate or equivalent knowledge. Meraki certification or equivalent knowledge. Experience: 8+ years of IT engineering experience and Windows Administration. Industry expertise with enterprise infrastructure solution development (physical computer, networking, storage, or data center concepts). Standards: Ability to follow standards as outlined in the cb20 Company Manual. Skills:Strong working experience in networking, WAN, LAN topology, and support; installing, configuring, and setting up workstations, servers, and printer. Working experience in building, troubleshooting, and maintaining VMWare and Hyper-V Virtual networks; Microsoft product portfolio; various technology OEMS. Excellent troubleshooting skills, the ability to multitask, and strong written and verbal communication skills. Working time: 40 hours/week. All other times as defined by the demands of the customers and departments needs. Lifting: Typically, no lifting more than 25 lbs.

Job DescriptionSalary: $45-$55K cb20 is the Capital Regions solution provider of choice for organizations that value IT and Managed Services expertise and category-leading customer service.We are an organization that puts Customers first, acts with Integrity, embraces innovation and values Self-Development and Contribution to our community. We partner with the worlds leading hardware and software companies to deliver end-to-end consulting, implementation and managed services across the U.S. With world-class engineering talent and 30+ years of experience cb20 delivers confidence, security, a true sense of control and the highest- quality, end-to-end customer experience in the business. As a Support Center Engineer I, you will provide Tier 1 support for customers. This role is responsible for providing customers with technical support, remotely and/or on-site so that they can complete core and essential duties of their roles with functional IT equipment. The candidate should be able to explain features of technical products, answer questions about installation, configuration, upgrades, customization, and usage of technical equipment. Duties and Responsibilities: • Perform customer support to clients via telephone, chat, email, or tickets., • Windows 11 imaging., • Migration from Windows 11 to 10., • Remove old assets and replace them with new assets., • Document all pertinent end user information in ticketing system., • Triaging, troubleshooting, and resolving error messages, failures, and customer issues., • Provide support for users utilizing laptops, workstations, desktops, iOS, and Android devices., • Provide connectivity support for users devices., • Configure and install software for end user devices such as laptops, workstations, and tablets., • Support and maintain customer systems and networks., • Provide exceptional customer service. Qualifications Requirements/Job Specifications Education: Associates degree in Computer Science OR equivalent combination of education and work experience. Desired: CompTIA A+ Certification. Experience: 0-3 years of IT experience. Experience working in a collaborative, collaborative environment. Standards: Ability to follow standards as outlined in the cb20 Company Manual. Skills: Knowledge of the following: O365/M365, Networking, Windows Servers, Virtualized Environments, PC Hardware, Backup Engines, VoIP, Cloud. Analytical and problem-solving abilities. Strong written, verbal communication, and documentation skills. Exceptional interpersonal skills, with a focus on rapport-building, listening, empathizing, and questioning skills. Ability to present technical terms in a user-friendly language. Ability to multitask and promote department success. Working time: 40 hours/week. All other times as defined by the demands of the customers and departments needs. Lifting: Typically, no lifting more than 25 lbs.

About This Position: We are seeking a qualified Project Engineer with 8-15 years' experience to become a part of our growing Highway Design Group for our Albany, Syracuse, and White Plains offices. Our highway engineers work on a variety of projects and interact with traffic engineers, structure engineers and our construction inspection staff. Responsibilities include: • Developing roadway, trail and sidewalk designs, • Intersection design and layout including roundabouts and traffic signals, • Checking design calculations prepared by others, • Preparation of construction contract documents, • Project coordination, report writing and estimating Engineer IV plans, schedules, conducts or coordinates detailed phases of the engineering work in part of a major project or in total project of a moderate scope. Perform work which involves conventional engineering practice but may include a variety of complex features. Typical projects include long-range transportation planning, traffic impact studies, site planning and design, highway and traffic signal design, transit planning and design, and bridge design. The Engineer IV level often requires efforts outside normal business hours to meet client requests and/or attend meetings. Essential Job Functions: • Perform broader assignments than an Engineer III., • Plan, schedule, conduct or coordinate detailed phases of engineering work in part of a major project., • Plan and conduct work requiring some judgment and independent evaluation., • Apply standard technology and procedures., • Conduct analysis choosing appropriate applications., • Anticipate bigger project objectives, • Complete intermediate and limited complex engineering assignments, • Perform cost and quantity estimating., • Attend project meetings and presents specific aspects of engineering assignments., • Responsible for report writing for basic projects and some intermediate projects., • Project engineer of basic projects - staffing, scope, schedule, budget., • Assume client relations for routine basic projects., • Provide some delegation and supervision of Engineer III's and Technicians., • Provide coordination for multi-discipline projects (intermediate level)., • Receive direction on technical guidance for complex problems., • Additional essential functions for an experienced person in this role:, • Prepares basic proposals including the scope of work, hours planning and estimate of fees., • Responsible for invoices., • Bachelor's degree in engineering from an ABET/EAC accredited program or an approved equivalent. Professional Engineering (P.E.) licensure required., • 4 years of experience in a similar engineering role required., • Proficiency with Microstation, Inroads and AutoTurn., • Working knowledge of the NYSDOT Highway Design Manual. Albany, NY, Syracuse, NY: $44/hour - $60/hour Westchester - White Plains, NY: $47/hour - $69/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. #LI-VL1 EducationBachelors of Engineering (required) ExperienceProficiency in MicroStation, Inroads, and AutoTurn (required) 4 years: Experience in a similar role (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Join the Creighton Manning team, a GAI Consultants Company... We are seeking an experienced Structural Project Engineer for bridge and other transportation-related projects to join our consulting firm in Albany, Poughkeepsie, Syracuse, or White Plains, New York. About This Position: A Project Engineer functions as a fully competent engineer in all aspects of the subject matter of assignments. Develops and evaluates plans and criteria for a variety of projects and activities to be carried out by junior staff. Assess the feasibility and soundness of proposal preparation. Generally performs as a staff advisor and consultant as to a technical specialty or a program function. Typical projects include bridge and culvert rehabilitations and replacements, retaining wall design, miscellaneous structural design for transportation infrastructure, and construction engineering support. Project Engineers often require efforts outside normal business hours to meet client requests and/or attend meetings. The ideal candidate will have: • Experience progressing transportation infrastructure design projects in New York State including culvert and bridge replacement or rehabilitation projects, • Strong organizational skills and an ability to manage multiple assignments and meet deadlines, • Strong communication, presentation, and client relation skills - both verbal and written Responsibilities include: • Ability to prepare or check calculations and/or direct the design procedures of others to ensure that calculations are in accordance with AASHTO and NYSDOT design standards., • Prepare Design Reports, specifications, plans, studies, permits, and designs for various bridge design projects., • Develop plan details for bridge replacement and rehabilitation projects in accordance with NYSDOT Standards., • Work within assigned task scope and budget, and coordinate with client and team to develop effective and efficient solutions., • Perform structural analysis and/or stability review of existing/new bridges/structures for proposed construction loading and temporary conditions., • Development of demolition/erection sequence plans; including the stability analysis of the structure during each of the different stages of construction., • Analysis and design of temporary shoring towers/systems for both gravity and lateral loads., • Design/Detailing of hydraulic jacking and structural lifting systems., • Development of Crane Pick Plans; including geometry and feasibility studies, Site Logistics, crane sizing and capacity checks, design of load distribution mats, custom rigging., • Serves as Project Engineer with autonomy for project related tasks and as a designated client contact. May have responsibilities on multiple projects. Essential Job Functions: • Plan, schedule, conduct or coordinate detailed phases of engineering work., • Plan and conduct work requiring judgment and independent evaluation., • Apply standard technology and procedures., • Conduct analysis choosing appropriate applications., • Anticipate bigger project objectives., • Complete complex engineering assignments., • Review cost and quantity estimating prepared by others., • Attend project meetings and presents specific aspects of engineering assignments., • Responsible for report writing for all complexity of projects., • Assume client relations for routine basic projects., • Provide delegation and supervision of Engineer I/II/III's and Technicians., • Provide coordination for multi-discipline projects., • Provide direction on technical guidance for complex problems., • QC/Peer review., • Oversee quality and standards., • Serve as a consultant and technical leader on proposals and projects. Provide technical guidance and strategy assistance in the development of design and/or planning proposals and concepts., • Develop innovative approaches to solve technical issues within the constraints of fiscal realities., • Seek technical challenges and troubleshoot technical issues on projects., • Capable to review product documents for technical quality assurance and compliance with standards. Job Requirements: • Bachelor's degree in engineering from an ABET/EAC accredited program or an approved equivalent., • 5-10 years of experience in a similar engineering role., • Professional Engineering (P.E.) licensure in NY or ability to obtain reciprocal licensure. Hourly Pay Range: Albany, NY, Poughkeepsie, NY, Syracuse, NY and White Plains, NY: $49.00/hour - $65.00/hour Pay is based on applicant's ability/experience and labor market, and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical or management track, and employees are encouraged to participate in our mentoring program to help them navigate their career. #INDHP EducationBachelors of Engineering (required) Experience5 - 10 years: Related Experience (required) Licenses & CertificationsDriver's License (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

About This Position: Project Engineer will assist with design development of commercial, institutional and residential related projects. Design experience should include layout, grading, water, wastewater, stormwater and other infrastructure facilities. Occasional field visits for purposes of investigations and construction phase support services. Essential Job Functions: • Site design and layout of vehicular and pedestrian circulation, parking and loading., • Roadway design, including street and sidewalk plans and profiles., • Utility design, including plans and profiles of water and sanitary sewer services., • Drainage and stormwater management design in accordance with NYSDEC requirements., • Grading and erosion control plans., • Proficiency with AutoCad/Civil 3D to assemble and manage AutoCAD set of design plans., • Coordinate with subconsultants regarding geotechnical services, landscape and lighting plans., • Construction administration and observation services., • Assist with developing application packages to be submitted to municipal board for review that comply with the following:, • SEQR review, including compliance with SEQR procedural requirements., • State and Federal environmental laws., • Local zoning, subdivision and land use regulations., • Local and generally accepted design and engineering standards., • Consistency with a municipality's Comprehensive Plan or other relevant Planning reports, • Bachelor's degree in civil engineering from an ABET accredited institution., • A Professional Engineer (P.E.) license in New York State or ability to obtain is required., • 5-10 years of experience in a similar role., • Excellent verbal and written communication skills are required., • Strong organizational skills are required., • Proficient with AutoCAD/Civil 3D software preferred., • Ability to multi-task and work under pressure in a fast-paced environment., • Ability to work efficiently, both independently and in a team environment., • Knowledge of construction methods of general excavation, pavement and utility installation., • Knowledge of federal, state and local permitting and the process involved., • Ability to verbally present site plans and reports to municipal land-use boards., • Contribute to a Project Manager's preparation of proposal scope & fees., • Knowledge is a plus for hydrologic and hydraulic modeling and design of stormwater management systems. Albany - $44/hour - $60/hour Poughkeepsie - $44/hour - $63/hour Westchester - White Plains - $47/hour - $66/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. EducationBachelors of Engineering (required) ExperienceProficient with AutoCAD/Civil 3D software (preferred) 5 - 10 years: Experience in a similar role. (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

As a quality assurance (QA) engineer in the Technology Procurement and Implementation Services practice, you will collaborate with business analysts, developers, business owners, and QA counterparts to validate functionality across complex workflows and system integrations. At least three- four year

Job Description About the Opportunity: HRP has an immediate full-time opening in our Clifton Park, NY office for a motivated, curious, and ambitious early‑career professional interested in air permitting and environmental compliance. If you’re excited by the idea of visiting client sites, navigating complex air regulations, developing emissions calculations, and preparing permit applications across a wide variety of industries, this role offers an excellent launchpad for your career. You’ll join a dynamic, collaborative team that tackles challenging environmental projects every day. HRP invests in your growth with hands-on training, mentorship, and opportunities to expand your technical expertise. If you're self‑driven, team‑oriented, and ready to make an impact, we want to meet you. Job Description: As an Entry-Level Air Permitting Engineer, you will support environmental compliance projects by collecting field data, interpreting regulatory requirements, and preparing technical documentation. You’ll gain exposure to federal and state air regulations, emissions modeling, multimedia compliance, and a wide range of environmental programs. This role blends technical analysis, fieldwork, and client interaction—ideal for someone who enjoys variety and continuous learning. Key Responsibilities: • Conduct air emission calculations for industrial and commercial operations, • Determine applicability of air permitting requirements, including NSPS and NESHAP standards, • Prepare air permit applications and supporting documentation, • Assist with air permitting recordkeeping and regulatory reporting, • Participate in multimedia compliance audits, • Support Process Safety Management (PSM) evaluations, • Assist with wastewater permitting (general and specific), • Support hazardous waste management compliance activities, • Prepare stormwater permits and spill control plans, • Learn and support air dispersion modeling (experience not required; interest is a plus), • Review and interpret technical documents, regulations, and engineering data, • Strong engineering math and chemistry foundation, • Ability to read, interpret, and apply technical and regulatory documents, • Excellent technical writing abilities, • Clear and effective verbal communication, • Strong organizational and interpersonal skills, • Bachelor’s degree in Environmental, Mechanical, or Chemical Engineering; Meteorology; or a related technical field, • Experience in environmental compliance or consulting (preferred but not required) Benefits & Company Culture: The vision of HRP Associates, Inc., is reliant on the expertise of our dedicated professionals who provide excellent consultation to our loyal clientele. We lead the industry in our commitment to employee growth and satisfaction in a positive, gratifying, and challenging workplace environment. We offer professional development opportunities, competitive salaries, and an excellent benefits package to qualified employees. We are always searching for top talent to join our growing team throughout HRP’s various locations. We constantly promote a fun and dynamic company culture, as well as a great work-life balance. Ideal candidates will enjoy working in team settings, participating in company-wide events and outings, possess a positive attitude, and can relate to our internal cultural motto of, “Work hard, play hard!” Other major benefits include: • Medical, Dental and Vision Coverage, • Life/Disability Insurance, • Company-sponsored Profit-Sharing Pension Plan, • 401(k) Retirement Plan, • Paid Holidays and Vacations Employee Resource Groups (ERGs) such as: • HRP Women - supports the professional and personal development for women employees while bringing awareness to women’s issues and fostering an inclusive environment., • 312 Committee - organizes employee events to support our culture and employee relationships, • Giving Group - coordinates events with local charities and organizations HRP Associates, Inc. is a full-service environmental engineering and hydrogeology firm headquartered in Farmington, CT, with regional offices in Derby (CT); Plymouth, Massachusetts; Saint Charles, Missouri; Clifton Park, New York; Greenville & Charleston, South Carolina; and Winston-Salem, North Carolina. We also have satellite offices in Charlotte, North Carolina; San Diego, California; and Houston, Texas. HRP's staff of professionals includes chemical, civil, geotechnical, and environmental engineers; inspectors; geologists; hydrogeologists; and industrial hygienists. For more information on job postings in all our offices and to find out more about the company, please visit our website at and our YouTube channel at . HRP is an Equal Opportunity/Affirmative Action Employer.

Job DescriptionDescription: Ready to lead bridge projects that strengthen and connect communities? At Fisher Associates, you’ll take ownership of high-impact bridge design and rehabilitation projects while advancing your career as a Bridge Project Manager. We’re seeking a motivated engineering professional with experience in bridge design, DOT coordination, and project delivery who is ready to step into a visible leadership role. If you’re driven by technical excellence, collaboration, and long-term career growth, this is your opportunity to make a measurable impact. Fisher Associates is seeking a motivated Project Manager – Bridge Engineering to join our growing transportation team. This role is ideal for professionals with experience in bridge design, structural analysis, transportation infrastructure, project management, and quality control who are ready to lead projects from concept development through final design and construction support. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Transportation Bridge Project Manager • Lead the planning, design, and delivery of bridge transportation projects., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy in collaboration with teams and clients to ensure alignment and seamless delivery., • Ensure compliance with federal, state, and local regulations, permitting requirements, and quality standards., • Identify project risks and implement proactive mitigation strategies., • Serve as the primary point of contact for clients, agencies, and stakeholders, • Cultivate and strengthen client relationships to support successful project outcomes and repeat business., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Support proposal development, scope definition, and fee estimates for new and existing clients., • B.S. degree in Civil Engineering, Master’s preferred, • 7+ years progressive transportation bridge design engineering and project management experience, • Demonstrated experience managing bridge design transportation projects from design through delivery., • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MS Office, MicroStation, STAAD and Bridge Design Software preferred, • Proven success in developing trusted, long-term client relationships, • Familiarity with NYSDOT design standards preferred, • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation will vary based on experience, qualifications, and other factors. The listed salary range does not guarantee specific pay or reflect total compensation and excludes the value of benefits. Why You’ll Love Working at Fisher • You are empowered to deliver exceptional results through collaborative design leadership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and project leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, collaborative atmosphere., • Your journey is supported by a team-driven environment promoting mentorship and continuous learning. Fisher offers competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking a motivated Entry Level Electrical Engineer to join our dynamic team. This is an exciting opportunity to launch your career with an industry leading architecture, engineering, and construction firm known for innovative solutions and a collaborative work environment. We believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. If you want your time, energy, talent, enthusiasm, and personal passion to result in meaningful impacts and improvements in our communities, you belong on the C&S team! Position Responsibilities • Works in the responsible charge of a licensed electrical engineer, • Assist in the design, analysis, and implementation of medium voltage, low voltage, telecommunication, and fire alarm systems for a variety of projects, including hospitality, theme parks, aviation, commercial, industrial, higher education, and healthcare., • Prepare drawings, specifications, and technical reports under the guidance of senior engineers., • Support project teams with calculations, cost estimates, and field investigations., • Collaborate with multidisciplinary teams to deliver high-quality, client-focused solutions., • Participate in site visits, inspections, and construction administration activities., • Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations, • Bachelor’s degree in Electrical Engineering from an accredited institution, • 0-4 years of relevant experience (internships or co-ops a plus), • Strong technical, analytical, and problem-solving skills, • Proficiency with AutoCAD, Revit, or similar design software preferred, • Excellent communication and teamwork abilities $78,000 - $95,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Bridge Design Engineer - Civil/Structural Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer with a civil or structural engineering background to join our growing Bridge and Transportation Engineering team. This role offers the opportunity to work on impactful bridge design and transportation infrastructure projects that enhance safety, resilience, and connectivity in the communities we serve. Whether you are already licensed or pursuing your Professional Engineering (PE) license, you’ll receive mentorship and hands-on experience across a variety of bridge and transportation projects. As a Bridge Design Engineer, you will collaborate with experienced professionals on the design, analysis, inspection, and rehabilitation of bridges, applying current DOT standards and industry best practices. This is an excellent opportunity to grow your career in bridge engineering and transportation infrastructure while making a lasting public impact. If you’re ready to advance your career and help shape the infrastructure of tomorrow, we encourage you to apply today. About Fisher Associates: At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Design Engineer • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Ensure all designs comply with applicable state and local standards, regulations and safety codes., • Support project managers with schedules, documentation, and presentations., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience with a background in structures/bridge design., • EIT required; Professional Engineering (PE) license preferred or ability to obtain licensure., • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge design engineering projects while gaining diverse, challenging experience that supports your professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionSalary: $86,773-$108,413 (EE I) or $93,659-$118,388 (EE II) The New York State Environmental Facilities Corporation (EFC), a public benefit corporation, aids local governments and other eligible applicants throughout New York State to undertake critical water quality infrastructure projects by providing access to low-cost financing capital, grants, and expert technical assistance. EFC is committed to fostering an inclusive workplace that values respect, diversity, and the unique perspectives of all individuals. To support our employees, EFC provides an outstanding benefits package similar to that offered to New York State employees. Our total compensation package includes, but is not limited to, leave benefits (Paid Parental Leave, 13 holidays and paid vacation, sick, and personal leave); a comprehensive health insurance program including medical, prescription drug, dental, and vision plans; and membership in either the NYS and Local Retirement System, which is a defined retirement plan, or the Voluntary Defined Contribution Program. Position Description Under the direction and supervision of the Unit Manager/Environmental Engineer III, the Environmental Engineer (EE) I or II is responsible for the technical engineering support for the New York Clean Water State Revolving Fund (CWSRF) Program and other funding programs administered by EFC. Primary responsibilities include the review of contracts, planning and design documents, co-funding information, and environmental review documentation from municipal applicants seeking funding for their water quality protection and wastewater treatment projects. The EE I or II applies engineering principles to establish that the submissions are consistent with applicable technical standards and State and Federal regulations. This includes issuing comments, approvals or eligibility determinations to applicants. In addition, the EE I or II acts as the engineering project manager interacting with other internal divisions and government agencies, including but not limited to close coordination with New York State Department of Environmental Conservation and the New York State Department of Health. Essential Duties • Contact and establish working relationships with municipal officials and their engineers to determine need for, and interest in, EFC assistance for water quality and water pollution control projects. Based on information obtained from municipal representatives, present project priority and eligibility for CWSRF financial assistance, and participate and present to CWSRF scoring panel., • Review and make recommendations for approval or eligibility of engineering reports, plans, specifications, change orders, and other technical documents for the planning, design, and construction of CWSRF eligible water quality protection and wastewater treatment facilities and various point, non-point, and National Estuary projects. Coordinate the review of these documents with other interested State and/or Federal agencies for conformance with applicable technical standards., • Manage multiple projects at various stages of development from concept through construction completion by providing appropriate technical and application assistance to municipal representatives. Organize and participate in conferences with potential recipients of financial assistance to discuss program requirements and policies., • Proactively maintain and update project database to reflect the current status of the project and ensure program requirements (permits, approvals, etc.) are met. Develop and maintain spreadsheets and other project documents in MS Word and Excel to monitor project status., • Visit construction sites throughout the State to monitor construction activities, including observing construction for compliance with the program requirements, securing appropriate programmatic documents, and performance of interim and final project site visits on large and complex projects. Complete reports to record observations. In addition to the above duties, EE IIs may serve as a mentor to other engineering staff (EE I) and will be assigned more complex projects and tasks, and perform tasks with greater independence than EE I. Qualifications All applicants must possess a valid New York State drivers license as travel is necessary to conduct meetings and site visits in various parts of the state. Engineers are assigned to geographically based project sections and will typically handle projects within the regional area they are assigned to. However, candidates must be willing to work in, and travel to, any part of New York State as their regional assignment may require shifting due to staffing, workload, or other considerations. EE I Minimum required qualifications include a Bachelors degree in Environmental, Civil, or Chemical Engineering and successful passage of Part 1 of the National Council of Examiners for Engineering and Surveying Fundamentals of Engineering (FE) examination. Three years of full-time wastewater related engineering experience can be substituted for the FE examination. EE II Environmental Engineer II candidates must possess a New York State Professional Engineers (PE) license and current registration; and demonstrate the experience and judgement necessary to work independently at the EE II level, as well as the ability to provide mentorship/leadership as needed. At the Corporations discretion, years of engineering experience, Professional licensure or certification (EIT/PE) and/or a masters level degree in a related field may be considered when determining salary level. Knowledge/Skills Knowledge of methods, materials and terminology used in the planning, design and construction of water quality and wastewater collection and treatment systems; including the ability to understand, interpret and analyze technical material, such as engineering reports, construction plans and specifications, contracts, technical reference materials and instructions is required. Knowledge in the following areas is desired: • Water quality and wastewater engineering, including familiarity with green stormwater practices, • Construction cost estimating and engineering economics, • Environmental permits and impact analysis, • Federal and State environmental regulations, • Energy efficiency and evaluation, • Pumps, motors, and drives, • Bidding mechanisms including requests for proposal and request for qualifications, • Contracting mechanisms including Design, Bid, Build; Energy Services Contracts (ESCO); Design-Build; and Contract Manager At-Risk (CMAR) Skill in the following areas is required: • Compiling and organizing large volumes of data and information clearly and concisely, • Management of multiple projects and strong ability to prioritize, • Strong verbal and written communication skills and an ability to interact effectively with people from diverse backgrounds in a professional manner, • Computers and applicable software (Microsoft Word and Excel), • Ability to manage multiple stakeholders with proficiency in navigating roles and responsibilities for scopes and contracts Working Conditions and Physical Abilities Work is primarily performed in an office setting, with prolonged periods of sitting and fine manipulation skills required for computer use. Application Requirements and Related Information Salary will be based on experience and qualifications, as well as market and business considerations. Employees may request to telecommute up to two days per week after the completion of their training period. In compliance with Public Law 99-603, candidates selected for appointment must provide, within three (3) business days of the employees first day of employment, an original copy of documentation proving citizenship and/or legal right to work in the United States. It is the policy of the State of New York and EFC to provide for and promote equal opportunity employment, compensation, and other terms and conditions of employment without discrimination on the basis of age, race, color, religion, physical or mental ability, national origin, gender, sexual orientation, veteran or military service member status, marital status, domestic violence victim status, genetic predisposition or carrier status, or arrest and/or criminal conviction record, unless based upon a bona fide occupational qualification or other exception. All individuals with disabilities are encouraged to apply to positions that they are qualified to perform. It is the policy of EFC to provide qualified persons with disabilities an equal opportunity to participate in and receive the benefits, services, programs, and activities of EFC, and to provide such persons with reasonable accommodations and reasonable modifications as are necessary, to enjoy such equal opportunity, including accommodations in the recruitment process. EFC will provide reasonable accommodation to ensure effective communication of information to individuals with disabilities. If you need an auxiliary aid or service to make this information available to you, please contact EFCs Human Resources Office at (518) 486-9267. It is the policy of EFC to provide reasonable accommodation for religious observers.

Job Description Navarro Research and Engineering is recruiting a Mechanical Engineer in Niskayuna, NY. A DOE L Clearance (or DOD equivalent) is required to be considered for this position. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. The candidate will work within a project team environment to support construction projects at the Knolls Site. Develop and define project scope with sponsors. Work with a project team to develop specifications, cost estimates, drawing reviews, and provide engineering support during construction phase for buildings and utility projects. Oversee architectural engineering firms in developing concept designs, construction documents, and cost estimates. Coordinate and interact with facility staff and contractors. Requirements • A DOE L Clearance (or DOD equivalent) is required to be considered for this position., • B.S. Mechanical Engineering., • Experience performing mechanical engineering tasks including the development of contract documents, calculations and cost estimates., • Working knowledge of building codes and standards. Experience in construction administration (submittal review, RFl's, construction inspections, etc.). Desired Knowledge, Skills, and Abilities • EIT certificate and or P.E. License Engineering consulting experience, • Working knowledge of ASME codes Working knowledge of HVAC systems Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability $90K to $180K annually

Job Description Position Summary In the role of Managed Services Network Architect, you will collaborate with cross-functional teams to design and optimize technology solutions that align with FirstLight Fiber’s strategic goals. Your responsibilities will include creating architectural standards, guiding technical decisions, driving innovation, and ensuring that systems and services meet high performance, security, and reliability standards. You will be shaping the future of our technology landscape through thoughtful design, comprehensive planning, testing, and effective collaboration. Key Responsibilities 1. Architectural Design & Strategy • Develop and maintain architectural documentation that addresses immediate technical needs while supporting long-term scalability and flexibility., • Establish and enforce architectural principles, design patterns, and documentation protocols that foster consistency and interoperability., • Stay informed about emerging technologies, evaluating their potential impact and feasibility within FirstLight’s environment. 2. Collaboration with Product & Engineering Teams • Work closely with product management and engineering to translate business and product requirements into effective, scalable designs., • Collaborate with operations, and security teams to ensure seamless integration of architectural solutions., • Provide subject-matter expertise to support decision-making around emerging technologies, frameworks, and third-party solutions. 3. Systems Integration & Implementation • Design and oversee the integration of complex systems, services, and applications to ensure interoperability and alignment with architectural standards., • Provide escalation and assistance in guiding projects from inception to production, ensuring that designs are properly implemented, tested, and optimized for performance., • Maintain comprehensive documentation—diagrams, data flowcharts, and architecture roadmaps. 4. Performance Optimization & Troubleshooting • Define key performance indicators for systems and processes, setting up monitoring strategies to detect bottlenecks and inefficiencies., • Conduct regular reviews of existing architectures, identifying areas for enhancement or refactoring to improve reliability and cost-effectiveness., • Collaborate with engineering and operations teams to resolve critical issues, performing root-cause analysis and recommending long-term solutions. 5. Security, Compliance & Risk Management • Integrate security best practices at every stage of design, ensuring confidentiality, integrity, and availability of systems and data., • Stay updated on relevant industry regulations and standards, incorporating them into design principles and documentation., • Evaluate potential vulnerabilities or architectural gaps, proposing mitigation strategies to maintain robust and secure systems. 6. Vendor & Stakeholder Management • Assess equipment, services, and solutions for technical fit, cost-effectiveness, and alignment with FirstLight Fiber standards., • Maintain productive relationships with key vendors and providers, ensuring service-level agreements (SLAs) and deliverables are met., • Collaborate with finance and leadership to manage operational and capital expenditures, optimizing costs while upholding architectural and operational integrity. 7. Leadership & Mentorship • Offer direction and support to junior architects, developers, and engineers, fostering a culture of learning and innovation., • Conduct training sessions, workshops, and design reviews to promote best practices and professional development across the organization., • Advocate for architectural integrity and forward-thinking solutions, ensuring technology initiatives align with broader objectives. 8. Sales Engineering support • Support Sales Engineering team pre-sale efforts by reviewing complex opportunities to determine viability and costing as requested through established review processes., • Provide regular technology and network status updates to the Sales Engineering team to ensure they understand operational capabilities and limitations., • Develop tools and processes for the Sales Engineering team to promote autonomy regarding product choices and costing for business case development. 9. Managed Services functionality validation specifics • Provide architectural responsibility and feature functionality validation for vendor agnostic SD-WAN platforms including Application and Flow Visibility, QoS / Traffic Shaping, Application Aware Routing, Dynamic Routing Capabilities, Multi-cloud support, Security / SASE Capabilities, Voice Support, Multigigabit Capabilities, Scalability and Operational Simplicity, • Provide architectural responsibility and feature functionality validation for vendor agnostic Security / SASE platforms including Multitenancy Support, Firewall as a Service, Intrusion Protection System (IPS), Malware Threat Protection, SSL Decryption, Zero Trust Network Access, Secure Web Gateway Inspection, Remote Access VPN, VPN site-to-site Tunnels, Dynamic Routing Protocols and Network Address Translation (NAT), • Provide architectural responsibility for and feature functionality validation for vendor agnostic switching and wireless platforms including Wi-Fi 7, Wi-Fi 6, Radios, Antennas & Coverage, IoT Ready, Security, Captive Portals, Guest Access, Traffic Shaping, and device standard for Indoor, Outdoor & Hospitality Models. 10. Managed Services product validation and platform assessment • Coordinate closely with the FirstLight Product Management team and other key stakeholders to thoroughly evaluate existing Managed Services offerings, ensuring that each product aligns with industry best practices and FirstLight’s overarching network architecture., • Validate product definitions, roles, and responsibilities to confirm both technical viability and strategic fit. Leverage market insights and evolving customer needs to identify additional product opportunities, ranging from enhancements and feature expansions to entirely new solutions., • Maintain a strong focus on operational efficiencies, service quality, and continuous innovation within the Managed Services portfolio., • Ongoing platform assessment, vendor validation and future growth evaluation including upgrading and testing new major software releases and patches, testing new device models, integration of emerging technologies (i.e. AI), throughput benchmark testing, logging capabilities, alerting capabilities, general reporting, monitoring traffic & performance issues, multi-tenancy support and platform management (cloud vs on-premises). Qualifications • Bachelor’s degree in Network Engineering, Information Technology, Computer Science, Cybersecurity, Telecommunications, or related field; or equivalent professional experience., • Strong understanding of enterprise routing and switching technologies including BGP, OSPF, VLANs, VRFs, NAT, and high-availability designs., • Firsthand experience supporting SD-WAN and/or SASE platforms from major vendors such as Fortinet, Cisco, VMware, or Palo Alto, • Working knowledge of next-generation firewall technologies including policy management, threat inspection, SSL inspection, and network segmentation., • Experience configuring and troubleshooting VPN technologies including IPSEC site-to-site and remote access solutions., • Familiarity with network access control and identity-based networking such as Cisco ISE, RADIUS, TACACS+, and 802.1X authentication., • Understanding network monitoring, alerting, and troubleshooting methodologies using SNMP, NetFlow, logging platforms, and performance monitoring tools., • Strong documentation, troubleshooting, and communication skills., • Minimum 6+ years of experience supporting or engineering enterprise network environments., • Experience managing customer-facing network infrastructure in a managed services, MSP, CLEC, or enterprise IT environment., • Demonstrated experience supporting firewalls, SD-WAN deployments, VPN connectivity, and secure remote access solutions in production environments., • Experience supporting hybrid WAN and cloud-connected enterprise networks., • Exposure to VoIP, SIP, and unified communications or voice engineering experience is a plus.

Job Description About NECI NECI is an Emerson Impact Partner and provider of industrial automation and digital transformation solutions and services. We solve process, automation, and data integration challenges in therapeutics, energy, and manufacturing with a broad portfolio of product, project, and service capabilities. Our experienced team has a deep knowledge of people, process and systems and relentlessly seeks to drive the outcomes that empower our partners to advance the world. Join in our mission! Role Summary We are looking for an Application Engineer to work closely to support our Account Executives, Sales Executives, and Order Management Specialists in pursuit of sales opportunities. As an Application Engineer, you will collaborate with the customer to provide guidance regarding product orders and proposal requirements, while assuring high levels of customer service and customer satisfaction in accordance with our Core Values. Benefits • Competitive Medical, Dental & Vison Insurance, • Flexible Spending or Health Savings Accounts, • Unlimited Vacation Time Policy, • 10 Paid Holidays, • 12 Paid Weeks Maternity Leave, • Retirement Savings: 401(k) and Employee Stock Ownership Plan, • Pet Insurance, • Employee Referral Bonus, • Tuition Reimbursement, • Company Paid STD, LTD, and Life Insurance, • Produce and provide proposals for customer solutions by listening to and evaluating our customer’s requirements and selecting and proposing innovative control solutions according to our customer’s and principal’s standards and practices., • Grow our valve automation business to meet annual company sales goals targets in our coverage area by promoting and fostering NECI’s reputation as a total valve supplier for ball valves, butterfly valves, valve automation, and solutions. Includes participating in training, developing a sufficient knowledge base of all product lines our company represents, being able to readily access all necessary information to develop and price valve automation solutions, and demonstrating a satisfactory competency level to meet the expected standards of performance necessary to deliver valve automation solutions to our customer base in a timely manner., • Achieve desired sales results for annual new product initiatives by participating in NECI and principal new product launches, probing and uncovering customer needs and pain points, and applying our new technology and product solution offerings., • Provide support & technical services to customers by assisting users with start-up, checkout, and calibration, and resolving product and/or service problems based on our principal’s standards and practices and NECI internal procedures., • Additionally, being responsible and accountable for following through on all customer orders, returns, credits, and invoicing issues etc. to a satisfactory resolution in accordance with Think Customer principals., • Support on time delivery to customer by assessing customers’ needs, determining the factories’ abilities to meet those needs, and negotiating mutually agreeable due dates with the customer. As appropriate, to also assist in expediting products and services with our suppliers and principals to meet or exceed committed customer expectations. This includes anticipating or recognizing situations or circumstances when total customer satisfaction is at risk and taking ownership of resolution., • Identify new sales opportunities and ensure consistent service by maintaining accurate customer information data utilizing IFS and identifying and qualifying new opportunities with our customers, and fully supporting our Account Managers’ plans and strategies for account growth and penetration., • Understand and actively participate in our quality management system by adopting our quality policy and all appropriate elements of our quality management system, dedicating your efforts to the reduction, elimination, and prevention of quality deficiencies, and initiating proper actions to prevent the occurrence of nonconformities related to our products, services, processes, and quality system. This also includes your timely participation as required in Corrective and Preventive Action Requests, Quality Circles/Teams, and collaboration with other Company Departments on continuous improvement initiatives., • Participate in the company’s safety and health program by understanding and following the established policies and procedures of our Safety and Health Manual, notifying appropriate Supervisors/Managers of any observed workplace safety and health compliance issues, and implementing appropriate recommendations to help improve our Company’s overall Safety and Health Program., • Maintain and develop professional and technical competence by attending periodic factory or principal-based training sessions, appropriate web-based training classes/seminars, periodic “hands-on” training, departmental meetings, as well as periodic professional development workshops or classes., • Bachelor’s degree in engineering: Mechanical, Industrial, or Chemical, • 0-3 years of relevant work experience, • Competitive Spirit: we are seeking someone self-motivated and driven by the pursuit and satisfaction in exceeding goals and delivering growth to the business. Must be currently authorized to work in the United States. Policy on Third-Party Unsolicited Resume Submissions: Please note that any third-party unsolicited resume submissions will immediately become the property of Stellix and its affiliates. Stellix and its affiliates will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Please Note: Stellix and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status or any other characteristic protected by law.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description Position Overview: The Hampton Inn Western Ave is seeking an experienced Maintenance Technician! As part of the Maintenance team, this position performs all necessary repairs and preventative maintenance as directed by the Chief Engineer/Engineering Supervisor, to maintain a safe, attractive, and efficiently operated hotel. He/she is responsible for performing other duties as assigned. Job Responsibilities: As a Maintenance Technician, you will be responsible for giving our guests the best hospitality experience you can by: • Completes maintenance requests in a timely manner. Works on improvement projects and preventative maintenance programs as directed., • Performs Suite Care, to maintain suites for guest satisfaction., • Performs exterior property maintenance, such as carpentry repair, painting, and all other functions necessary to the facility., • Exhibits friendly, caring attitude toward guest and co-workers., • Consistently leaves maintenance slip in guest suite when work is completed., • Practices safety throughout work shift by removing/correcting and hazards identified., • On call (emergency) rotation and works close with the housekeeping department., • Maintain high standards of personal appearance and grooming, which include compliance with Company dress code and wearing a nametag when working., • Always maintain a professional and friendly demeanor., • Must always be attentive, courteous, and efficient in the dealings with guests, managers and all other employees., • Establish and maintain good communications and teamwork with fellow employees and other departments within the hotel., • Routinely communicate with the Housekeeping Manager and all other employees on issues of maintaining the property in excellent condition., • Communicate with other hotel staff to accommodate special guest requests., • Comply with compliance standards and regulations to encourage safe and efficient hotel operations., • Responsible for maintaining the physical structure and grounds of the hotel property in like-new condition, including landscaping, walkways, pool area and sport courts, as directed by Engineering Manager., • Assign or handle maintenance requests, improvement projects and develop preventative maintenance programs., • Must be able to use two-way radios, telephones, general office equipment and various types of maintenance equipment., • Follow compliance with company standards, safety rules, and health and sanitation regulations., • Previous hotel or related field maintenance experience is required., • A working ability with HVAC, electrical, plumbing, and carpentry is needed, and formal training in at least one of these disciplines is preferred., • English skills are required., • All state and local age and licensing requirements must be met prior to operating and handling any hand or power tools, torches, chemicals, etc., as well as for driving the hotel van., • Must have a valid driver’s license., • Long and flexible hours are sometimes required., • Must be able to work evenings, weekends, and holidays as needed., • Heavy work - Exerting up to 100 pounds of force occasionally, up to 50 pounds of force frequently and up to 20 pounds constantly to lift, carry, push, pull, or otherwise move objects., • Ability to stand during the entire shift., • Ability to reach overhead, utilize both hands, bend over, and stoop and kneel., • Must be capable of climbing and descending stairs during their shift., • Must be able to understand and follow directions, guidelines, and work objectives as set forth by the Engineering Manager., • Must be able to understand the potential hazards and subsequent procedures involved in working around commercial chemical agents and various types of machinery., • Must use common sense and integrity in ensuring the security of guest belongings while working in occupied suites., • Must be able to work in a self-managed and self-directed environment. Powered by JazzHR m8JMtnZQnh

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Full-time role based in Philadelphia, PA, Newark, NJ, or Albany, NY areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description Engineering data centers with precision and expertise. At Strategic Mission Critical, we are more than just engineers; we are experts focusing solely on mission critical facilities. Our seasoned leadership team brings together decades of experience, equipping data center providers worldwide with robust, reliable solutions that keep pace with the evolving digital landscape. With a rapidly expanding market and the anticipated increase in demand driven by AI advancements, SMC is at the forefront of industry growth. We offer not just jobs, but career paths that reward innovation and expertise. If you want to work alongside highly skilled professionals with years of mission critical experience, then we want you to be part of a team, a team that works on major projects for top-tier data center providers. Your work will ensure the resilience and efficiency of data infrastructure that millions depend on. SMC is actively looking for Entry Level Mechanical Engineer/Designer to help execute mechanical design for mission critical projects. Typical project types may include design of greenfield and brownfield data center facilities, design of fit-out packages for hyperscale and enterprise clients of colocation providers, data center campus planning, conceptual designs and feasibility studies, and various system calculations. This candidate will execute specific design tasks as part of a broader mechanical team while furthering their own knowledge and developing their skills. The candidate will typically work under the guidance of senior and/or mid-level engineers. The mechanical design scope will be a part of a broader project and therefore this candidate will learn to interface with design leads within SMC (electrical, telecommunications, fire protection, plumbing) as well as externally including architectural, civil, structural, etc. The ideal candidate has a strong work ethic, is eager to learn, and wants to grow their expertise and career at as rapid a pace as suits them. This position is open to full time, part time, and internship/co-op applicants. RESPONSIBILITIES This candidate will have the opportunity to execute specific mechanical design tasks for various project types while working and coordinating with clients and design leads from all disciplines. This candidate shall have the ability to communicate effectively with co-workers and with clients while being able to meet scheduled project deadlines. They will be a self-starter not afraid to do independent research in addition to directly-assigned project work in order to further their career growth. Responsibilities include but are not limited to: • Utilize Autodesk Revit to produce detailed design documents., • Assist with performing airside and hydronic calculations for multiple mechanical systems., • Build an understanding and ability to develop hydronic & airflow flow diagrams., • Learn how to select and specify HVAC equipment, • Assist with meeting project deadlines, including working necessary hours to complete major deliverables., • Review and gain an understanding of local and national construction codes and project specifications to grow a broader understanding of the construction process., • Have experience with the use of Microsoft tools such as Word, Power Point, Excel, and Teams., • Have the ability to travel when required to project sites (less than 10% travel)., • Have the ability to clearly communicate with others in both written and spoken forms., • Be willing to take direction from senior and mid-level engineers and designers in order to execute delivery of specific design elements., • Be able to work independently while coordinating with senior personnel and other disciplines., • Be an active participant in training and mentoring opportunities in order to grow knowledge and capabilities., • Maintain excellent organizational skills, with the ability to manage multiple tasks simultaneously QUALIFICATIONS • 2 or 4-year degree in mechanical engineering or mechanical engineering technology preferred, HVAC construction experience with a drafting certification will be considered as well., • Past internship, co-op, or work experience in a consulting engineering role is a plus., • Experience working in the construction industry is a plus., • Experience using Revit in either an educational or professional context is a plus., • Engineer-in-Training (EIT) is a plus. COMPENSATION Base Compensation: $45,000-$150,000 (Actual compensation is subject to variation due to factors such as education, experience, skills and/or location) SMC offers a competitive benefits package, with a 36-hour standard work week, hybrid working arrangement, 13 paid holidays, 100% coverage of medical, health, and dental insurance premiums for our full-time employees, and reimbursement of professional licensing costs. Spouse and family insurance premiums are subsidized by SMC. All full-time employees are additionally eligible for employer-sponsored life and long-term disability insurance as well as participation in our 401(k) plan, with annual safe harbor contribution.

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Precast Design Engineer • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Create meaningful community impact through engaging precast engineering projects while advancing your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Engineer I (Controls/Automation focus) to work within a project team to develop, program, and commission Rockwell PLCs and HMI software. You Will: • Automate engineering design, programming, and testing for configuration of Rockwell PLCs and HMI software, • Independently provide project support activities such as detailed design, design review, implementation, program changes, testing/debug, and troubleshooting, • Work Schedule is 3rd shift (Midnight to 10AM), but you can transfer to another shift after 24 months, • Work Week consists of four days on and 3 days off (4 10s). One of the days will fall on a weekend, • Associate's Degree in Engineering, • Minimum of 2 years of automation experience using Rockwell PLCs and HMI software, • Experience in the Life Science Industry a plus, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry, • Prompt enrollment into Medical, Dental, and Vision benefits, • Generous paid time off that includes paid vacation, paid holidays, paid family leave and personal/sick time off E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. #BB-LI1

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.