Trabajos Engineering en Latham, New York - Page 2Crear alertas

Job DescriptionSalary: $86,773-$108,413 (EE I) or $93,659-$118,388 (EE II) The New York State Environmental Facilities Corporation (EFC), a public benefit corporation, aids local governments and other eligible applicants throughout New York State to undertake critical water quality infrastructure projects by providing access to low-cost financing capital, grants, and expert technical assistance. EFC is committed to fostering an inclusive workplace that values respect, diversity, and the unique perspectives of all individuals. To support our employees, EFC provides an outstanding benefits package similar to that offered to New York State employees. Our total compensation package includes, but is not limited to, leave benefits (Paid Parental Leave, 13 holidays and paid vacation, sick, and personal leave); a comprehensive health insurance program including medical, prescription drug, dental, and vision plans; and membership in either the NYS and Local Retirement System, which is a defined retirement plan, or the Voluntary Defined Contribution Program. Position Description Under the direction and supervision of the Unit Manager/Environmental Engineer III, the Environmental Engineer (EE) I or II is responsible for the technical engineering support for the New York Clean Water State Revolving Fund (CWSRF) Program and other funding programs administered by EFC. Primary responsibilities include the review of contracts, planning and design documents, co-funding information, and environmental review documentation from municipal applicants seeking funding for their water quality protection and wastewater treatment projects. The EE I or II applies engineering principles to establish that the submissions are consistent with applicable technical standards and State and Federal regulations. This includes issuing comments, approvals or eligibility determinations to applicants. In addition, the EE I or II acts as the engineering project manager interacting with other internal divisions and government agencies, including but not limited to close coordination with New York State Department of Environmental Conservation and the New York State Department of Health. Essential Duties • Contact and establish working relationships with municipal officials and their engineers to determine need for, and interest in, EFC assistance for water quality and water pollution control projects. Based on information obtained from municipal representatives, present project priority and eligibility for CWSRF financial assistance, and participate and present to CWSRF scoring panel., • Review and make recommendations for approval or eligibility of engineering reports, plans, specifications, change orders, and other technical documents for the planning, design, and construction of CWSRF eligible water quality protection and wastewater treatment facilities and various point, non-point, and National Estuary projects. Coordinate the review of these documents with other interested State and/or Federal agencies for conformance with applicable technical standards., • Manage multiple projects at various stages of development from concept through construction completion by providing appropriate technical and application assistance to municipal representatives. Organize and participate in conferences with potential recipients of financial assistance to discuss program requirements and policies., • Proactively maintain and update project database to reflect the current status of the project and ensure program requirements (permits, approvals, etc.) are met. Develop and maintain spreadsheets and other project documents in MS Word and Excel to monitor project status., • Visit construction sites throughout the State to monitor construction activities, including observing construction for compliance with the program requirements, securing appropriate programmatic documents, and performance of interim and final project site visits on large and complex projects. Complete reports to record observations. In addition to the above duties, EE IIs may serve as a mentor to other engineering staff (EE I) and will be assigned more complex projects and tasks, and perform tasks with greater independence than EE I. Qualifications All applicants must possess a valid New York State drivers license as travel is necessary to conduct meetings and site visits in various parts of the state. Engineers are assigned to geographically based project sections and will typically handle projects within the regional area they are assigned to. However, candidates must be willing to work in, and travel to, any part of New York State as their regional assignment may require shifting due to staffing, workload, or other considerations. EE I Minimum required qualifications include a Bachelors degree in Environmental, Civil, or Chemical Engineering and successful passage of Part 1 of the National Council of Examiners for Engineering and Surveying Fundamentals of Engineering (FE) examination. Three years of full-time wastewater related engineering experience can be substituted for the FE examination. EE II Environmental Engineer II candidates must possess a New York State Professional Engineers (PE) license and current registration; and demonstrate the experience and judgement necessary to work independently at the EE II level, as well as the ability to provide mentorship/leadership as needed. At the Corporations discretion, years of engineering experience, Professional licensure or certification (EIT/PE) and/or a masters level degree in a related field may be considered when determining salary level. Knowledge/Skills Knowledge of methods, materials and terminology used in the planning, design and construction of water quality and wastewater collection and treatment systems; including the ability to understand, interpret and analyze technical material, such as engineering reports, construction plans and specifications, contracts, technical reference materials and instructions is required. Knowledge in the following areas is desired: • Water quality and wastewater engineering, including familiarity with green stormwater practices, • Construction cost estimating and engineering economics, • Environmental permits and impact analysis, • Federal and State environmental regulations, • Energy efficiency and evaluation, • Pumps, motors, and drives, • Bidding mechanisms including requests for proposal and request for qualifications, • Contracting mechanisms including Design, Bid, Build; Energy Services Contracts (ESCO); Design-Build; and Contract Manager At-Risk (CMAR) Skill in the following areas is required: • Compiling and organizing large volumes of data and information clearly and concisely, • Management of multiple projects and strong ability to prioritize, • Strong verbal and written communication skills and an ability to interact effectively with people from diverse backgrounds in a professional manner, • Computers and applicable software (Microsoft Word and Excel), • Ability to manage multiple stakeholders with proficiency in navigating roles and responsibilities for scopes and contracts Working Conditions and Physical Abilities Work is primarily performed in an office setting, with prolonged periods of sitting and fine manipulation skills required for computer use. Application Requirements and Related Information Salary will be based on experience and qualifications, as well as market and business considerations. Employees may request to telecommute up to two days per week after the completion of their training period. In compliance with Public Law 99-603, candidates selected for appointment must provide, within three (3) business days of the employees first day of employment, an original copy of documentation proving citizenship and/or legal right to work in the United States. It is the policy of the State of New York and EFC to provide for and promote equal opportunity employment, compensation, and other terms and conditions of employment without discrimination on the basis of age, race, color, religion, physical or mental ability, national origin, gender, sexual orientation, veteran or military service member status, marital status, domestic violence victim status, genetic predisposition or carrier status, or arrest and/or criminal conviction record, unless based upon a bona fide occupational qualification or other exception. All individuals with disabilities are encouraged to apply to positions that they are qualified to perform. It is the policy of EFC to provide qualified persons with disabilities an equal opportunity to participate in and receive the benefits, services, programs, and activities of EFC, and to provide such persons with reasonable accommodations and reasonable modifications as are necessary, to enjoy such equal opportunity, including accommodations in the recruitment process. EFC will provide reasonable accommodation to ensure effective communication of information to individuals with disabilities. If you need an auxiliary aid or service to make this information available to you, please contact EFCs Human Resources Office at (518) 486-9267. It is the policy of EFC to provide reasonable accommodation for religious observers.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Engineer I (Controls/Automation focus) to work within a project team to develop, program, and commission Rockwell PLCs and HMI software. You Will: • Automate engineering design, programming, and testing for configuration of Rockwell PLCs and HMI software, • Independently provide project support activities such as detailed design, design review, implementation, program changes, testing/debug, and troubleshooting, • Work Schedule is 3rd shift (Midnight to 10AM), but you can transfer to another shift after 24 months, • Work Week consists of four days on and 3 days off (4 10s). One of the days will fall on a weekend, • Associate's Degree in Engineering, • Minimum of 2 years of automation experience using Rockwell PLCs and HMI software, • Experience in the Life Science Industry a plus, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry, • Prompt enrollment into Medical, Dental, and Vision benefits, • Generous paid time off that includes paid vacation, paid holidays, paid family leave and personal/sick time off E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. #BB-LI1

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Engineering data centers with precision and expertise. At Strategic Mission Critical, we are more than just engineers; we are experts focusing solely on mission critical facilities. Our seasoned leadership team brings together decades of experience, equipping data center providers worldwide with robust, reliable solutions that keep pace with the evolving digital landscape. With a rapidly expanding market and the anticipated increase in demand driven by AI advancements, SMC is at the forefront of industry growth. We offer not just jobs, but career paths that reward innovation and expertise. If you want to work alongside highly skilled professionals with years of mission critical experience, then we want you to be part of a team, a team that works on major projects for top-tier data center providers. Your work will ensure the resilience and efficiency of data infrastructure that millions depend on. SMC is actively looking for Entry Level Mechanical Engineer/Designer to help execute mechanical design for mission critical projects. Typical project types may include design of greenfield and brownfield data center facilities, design of fit-out packages for hyperscale and enterprise clients of colocation providers, data center campus planning, conceptual designs and feasibility studies, and various system calculations. This candidate will execute specific design tasks as part of a broader mechanical team while furthering their own knowledge and developing their skills. The candidate will typically work under the guidance of senior and/or mid-level engineers. The mechanical design scope will be a part of a broader project and therefore this candidate will learn to interface with design leads within SMC (electrical, telecommunications, fire protection, plumbing) as well as externally including architectural, civil, structural, etc. The ideal candidate has a strong work ethic, is eager to learn, and wants to grow their expertise and career at as rapid a pace as suits them. This position is open to full time, part time, and internship/co-op applicants. RESPONSIBILITIES This candidate will have the opportunity to execute specific mechanical design tasks for various project types while working and coordinating with clients and design leads from all disciplines. This candidate shall have the ability to communicate effectively with co-workers and with clients while being able to meet scheduled project deadlines. They will be a self-starter not afraid to do independent research in addition to directly-assigned project work in order to further their career growth. Responsibilities include but are not limited to: • Utilize Autodesk Revit to produce detailed design documents., • Assist with performing airside and hydronic calculations for multiple mechanical systems., • Build an understanding and ability to develop hydronic & airflow flow diagrams., • Learn how to select and specify HVAC equipment, • Assist with meeting project deadlines, including working necessary hours to complete major deliverables., • Review and gain an understanding of local and national construction codes and project specifications to grow a broader understanding of the construction process., • Have experience with the use of Microsoft tools such as Word, Power Point, Excel, and Teams., • Have the ability to travel when required to project sites (less than 10% travel)., • Have the ability to clearly communicate with others in both written and spoken forms., • Be willing to take direction from senior and mid-level engineers and designers in order to execute delivery of specific design elements., • Be able to work independently while coordinating with senior personnel and other disciplines., • Be an active participant in training and mentoring opportunities in order to grow knowledge and capabilities., • Maintain excellent organizational skills, with the ability to manage multiple tasks simultaneously QUALIFICATIONS • 2 or 4-year degree in mechanical engineering or mechanical engineering technology preferred, HVAC construction experience with a drafting certification will be considered as well., • Past internship, co-op, or work experience in a consulting engineering role is a plus., • Experience working in the construction industry is a plus., • Experience using Revit in either an educational or professional context is a plus., • Engineer-in-Training (EIT) is a plus. COMPENSATION Base Compensation: $45,000-$150,000 (Actual compensation is subject to variation due to factors such as education, experience, skills and/or location) SMC offers a competitive benefits package, with a 36-hour standard work week, hybrid working arrangement, 13 paid holidays, 100% coverage of medical, health, and dental insurance premiums for our full-time employees, and reimbursement of professional licensing costs. Spouse and family insurance premiums are subsidized by SMC. All full-time employees are additionally eligible for employer-sponsored life and long-term disability insurance as well as participation in our 401(k) plan, with annual safe harbor contribution.

Job Description About NECI NECI is an Emerson Impact Partner and provider of industrial automation and digital transformation solutions and services. We solve process, automation, and data integration challenges in therapeutics, energy, and manufacturing with a broad portfolio of product, project, and service capabilities. Our experienced team has a deep knowledge of people, process and systems and relentlessly seeks to drive the outcomes that empower our partners to advance the world. Join in our mission! Role Summary We are looking for an Application Engineer to work closely to support our Account Executives, Sales Executives, and Order Management Specialists in pursuit of sales opportunities. As an Application Engineer, you will collaborate with the customer to provide guidance regarding product orders and proposal requirements, while assuring high levels of customer service and customer satisfaction in accordance with our Core Values. Benefits • Competitive Medical, Dental & Vison Insurance, • Flexible Spending or Health Savings Accounts, • Unlimited Vacation Time Policy, • 10 Paid Holidays, • 12 Paid Weeks Maternity Leave, • Retirement Savings: 401(k) and Employee Stock Ownership Plan, • Pet Insurance, • Employee Referral Bonus, • Tuition Reimbursement, • Company Paid STD, LTD, and Life Insurance, • Produce and provide proposals for customer solutions by listening to and evaluating our customer’s requirements and selecting and proposing innovative control solutions according to our customer’s and principal’s standards and practices., • Grow our valve automation business to meet annual company sales goals targets in our coverage area by promoting and fostering NECI’s reputation as a total valve supplier for ball valves, butterfly valves, valve automation, and solutions. Includes participating in training, developing a sufficient knowledge base of all product lines our company represents, being able to readily access all necessary information to develop and price valve automation solutions, and demonstrating a satisfactory competency level to meet the expected standards of performance necessary to deliver valve automation solutions to our customer base in a timely manner., • Achieve desired sales results for annual new product initiatives by participating in NECI and principal new product launches, probing and uncovering customer needs and pain points, and applying our new technology and product solution offerings., • Provide support & technical services to customers by assisting users with start-up, checkout, and calibration, and resolving product and/or service problems based on our principal’s standards and practices and NECI internal procedures., • Additionally, being responsible and accountable for following through on all customer orders, returns, credits, and invoicing issues etc. to a satisfactory resolution in accordance with Think Customer principals., • Support on time delivery to customer by assessing customers’ needs, determining the factories’ abilities to meet those needs, and negotiating mutually agreeable due dates with the customer. As appropriate, to also assist in expediting products and services with our suppliers and principals to meet or exceed committed customer expectations. This includes anticipating or recognizing situations or circumstances when total customer satisfaction is at risk and taking ownership of resolution., • Identify new sales opportunities and ensure consistent service by maintaining accurate customer information data utilizing IFS and identifying and qualifying new opportunities with our customers, and fully supporting our Account Managers’ plans and strategies for account growth and penetration., • Understand and actively participate in our quality management system by adopting our quality policy and all appropriate elements of our quality management system, dedicating your efforts to the reduction, elimination, and prevention of quality deficiencies, and initiating proper actions to prevent the occurrence of nonconformities related to our products, services, processes, and quality system. This also includes your timely participation as required in Corrective and Preventive Action Requests, Quality Circles/Teams, and collaboration with other Company Departments on continuous improvement initiatives., • Participate in the company’s safety and health program by understanding and following the established policies and procedures of our Safety and Health Manual, notifying appropriate Supervisors/Managers of any observed workplace safety and health compliance issues, and implementing appropriate recommendations to help improve our Company’s overall Safety and Health Program., • Maintain and develop professional and technical competence by attending periodic factory or principal-based training sessions, appropriate web-based training classes/seminars, periodic “hands-on” training, departmental meetings, as well as periodic professional development workshops or classes., • Bachelor’s degree in engineering: Mechanical, Industrial, or Chemical, • 0-3 years of relevant work experience, • Competitive Spirit: we are seeking someone self-motivated and driven by the pursuit and satisfaction in exceeding goals and delivering growth to the business. Must be currently authorized to work in the United States. Policy on Third-Party Unsolicited Resume Submissions: Please note that any third-party unsolicited resume submissions will immediately become the property of Stellix and its affiliates. Stellix and its affiliates will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Please Note: Stellix and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status or any other characteristic protected by law.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Position Summary In the role of Managed Services Network Architect, you will collaborate with cross-functional teams to design and optimize technology solutions that align with FirstLight Fiber’s strategic goals. Your responsibilities will include creating architectural standards, guiding technical decisions, driving innovation, and ensuring that systems and services meet high performance, security, and reliability standards. You will be shaping the future of our technology landscape through thoughtful design, comprehensive planning, testing, and effective collaboration. Key Responsibilities 1. Architectural Design & Strategy • Develop and maintain architectural documentation that addresses immediate technical needs while supporting long-term scalability and flexibility., • Establish and enforce architectural principles, design patterns, and documentation protocols that foster consistency and interoperability., • Stay informed about emerging technologies, evaluating their potential impact and feasibility within FirstLight’s environment. 2. Collaboration with Product & Engineering Teams • Work closely with product management and engineering to translate business and product requirements into effective, scalable designs., • Collaborate with operations, and security teams to ensure seamless integration of architectural solutions., • Provide subject-matter expertise to support decision-making around emerging technologies, frameworks, and third-party solutions. 3. Systems Integration & Implementation • Design and oversee the integration of complex systems, services, and applications to ensure interoperability and alignment with architectural standards., • Provide escalation and assistance in guiding projects from inception to production, ensuring that designs are properly implemented, tested, and optimized for performance., • Maintain comprehensive documentation—diagrams, data flowcharts, and architecture roadmaps. 4. Performance Optimization & Troubleshooting • Define key performance indicators for systems and processes, setting up monitoring strategies to detect bottlenecks and inefficiencies., • Conduct regular reviews of existing architectures, identifying areas for enhancement or refactoring to improve reliability and cost-effectiveness., • Collaborate with engineering and operations teams to resolve critical issues, performing root-cause analysis and recommending long-term solutions. 5. Security, Compliance & Risk Management • Integrate security best practices at every stage of design, ensuring confidentiality, integrity, and availability of systems and data., • Stay updated on relevant industry regulations and standards, incorporating them into design principles and documentation., • Evaluate potential vulnerabilities or architectural gaps, proposing mitigation strategies to maintain robust and secure systems. 6. Vendor & Stakeholder Management • Assess equipment, services, and solutions for technical fit, cost-effectiveness, and alignment with FirstLight Fiber standards., • Maintain productive relationships with key vendors and providers, ensuring service-level agreements (SLAs) and deliverables are met., • Collaborate with finance and leadership to manage operational and capital expenditures, optimizing costs while upholding architectural and operational integrity. 7. Leadership & Mentorship • Offer direction and support to junior architects, developers, and engineers, fostering a culture of learning and innovation., • Conduct training sessions, workshops, and design reviews to promote best practices and professional development across the organization., • Advocate for architectural integrity and forward-thinking solutions, ensuring technology initiatives align with broader objectives. 8. Sales Engineering support • Support Sales Engineering team pre-sale efforts by reviewing complex opportunities to determine viability and costing as requested through established review processes., • Provide regular technology and network status updates to the Sales Engineering team to ensure they understand operational capabilities and limitations., • Develop tools and processes for the Sales Engineering team to promote autonomy regarding product choices and costing for business case development. 9. Managed Services functionality validation specifics • Provide architectural responsibility and feature functionality validation for vendor agnostic SD-WAN platforms including Application and Flow Visibility, QoS / Traffic Shaping, Application Aware Routing, Dynamic Routing Capabilities, Multi-cloud support, Security / SASE Capabilities, Voice Support, Multigigabit Capabilities, Scalability and Operational Simplicity, • Provide architectural responsibility and feature functionality validation for vendor agnostic Security / SASE platforms including Multitenancy Support, Firewall as a Service, Intrusion Protection System (IPS), Malware Threat Protection, SSL Decryption, Zero Trust Network Access, Secure Web Gateway Inspection, Remote Access VPN, VPN site-to-site Tunnels, Dynamic Routing Protocols and Network Address Translation (NAT), • Provide architectural responsibility for and feature functionality validation for vendor agnostic switching and wireless platforms including Wi-Fi 7, Wi-Fi 6, Radios, Antennas & Coverage, IoT Ready, Security, Captive Portals, Guest Access, Traffic Shaping, and device standard for Indoor, Outdoor & Hospitality Models. 10. Managed Services product validation and platform assessment • Coordinate closely with the FirstLight Product Management team and other key stakeholders to thoroughly evaluate existing Managed Services offerings, ensuring that each product aligns with industry best practices and FirstLight’s overarching network architecture., • Validate product definitions, roles, and responsibilities to confirm both technical viability and strategic fit. Leverage market insights and evolving customer needs to identify additional product opportunities, ranging from enhancements and feature expansions to entirely new solutions., • Maintain a strong focus on operational efficiencies, service quality, and continuous innovation within the Managed Services portfolio., • Ongoing platform assessment, vendor validation and future growth evaluation including upgrading and testing new major software releases and patches, testing new device models, integration of emerging technologies (i.e. AI), throughput benchmark testing, logging capabilities, alerting capabilities, general reporting, monitoring traffic & performance issues, multi-tenancy support and platform management (cloud vs on-premises). Qualifications • Bachelor’s degree in Network Engineering, Information Technology, Computer Science, Cybersecurity, Telecommunications, or related field; or equivalent professional experience., • Strong understanding of enterprise routing and switching technologies including BGP, OSPF, VLANs, VRFs, NAT, and high-availability designs., • Firsthand experience supporting SD-WAN and/or SASE platforms from major vendors such as Fortinet, Cisco, VMware, or Palo Alto, • Working knowledge of next-generation firewall technologies including policy management, threat inspection, SSL inspection, and network segmentation., • Experience configuring and troubleshooting VPN technologies including IPSEC site-to-site and remote access solutions., • Familiarity with network access control and identity-based networking such as Cisco ISE, RADIUS, TACACS+, and 802.1X authentication., • Understanding network monitoring, alerting, and troubleshooting methodologies using SNMP, NetFlow, logging platforms, and performance monitoring tools., • Strong documentation, troubleshooting, and communication skills., • Minimum 6+ years of experience supporting or engineering enterprise network environments., • Experience managing customer-facing network infrastructure in a managed services, MSP, CLEC, or enterprise IT environment., • Demonstrated experience supporting firewalls, SD-WAN deployments, VPN connectivity, and secure remote access solutions in production environments., • Experience supporting hybrid WAN and cloud-connected enterprise networks., • Exposure to VoIP, SIP, and unified communications or voice engineering experience is a plus.

Job DescriptionDescription: Minimum Requirements Education: Minimum 4 Year Degree - Bachelor of Science in Mechanical Engineering Actual Field Experience: 10-15 years of working in building construction. Direct Hourly Salary: $60/hr - $75/hr dependent on education, experience level, skillset and benefit package selected, rates will vary. Daily PPE: Wear full-faced respirator, hard hat, safety glasses, Tyvek clothing, safety shoes every day during site inspections and oversight services. Position Location: Watervliet, New York Computer Knowledge: Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Government uses software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, AutoCAD. Program Knowledge: Familiarity USACE EM 385-1-1 and Unified Facilities Criteria (UFC) Requirements & Criteria is a plus. Previous Employment Exposure: US Army, NAVFAC, DOD installations a plus Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, work in the field 80% of the time, while providing 20% of the time daily reporting to Owner project management team and record management file repository. During field work, PPE must be worn 100% of the time. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to: Mechanical, Electrical, Plumbing, Fire Protection: prepare daily QA reports during mechanical walkdown inspections, perform site surveys, collect existing condition data in the field, documenting QA inspections and observe QC tests, ensure daily Punch Lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities, interpret construction drawings & specifications, observe and document construction activities with photographs and videos, observe Health and Safety plan conformance, including any lead or asbestos abatement, review and comment on Contractor daily QC reports, prepare meeting minutes, monitor supply chain and procurement deliverables, observe and document startup, turnover and commissioning activities. Other Daily Position Qualifications: • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings, • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions, • Must perform tasks as quality inspector to maintain conformance with specifications. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Employment is contingent upon successful completion of a background check. Requirements:

Job Description Senior Data Integration & ETL Engineer Location : One Day in a week on site Albany NY Duration : Long-term Contract Client : Government Agency Start Date : ASAP About the Role We are seeking a highly skilled Senior Data Integration & ETL Engineer to support a large-scale data analytics and data interchange initiative for a government client. The ideal consultant will have deep experience building and maintaining complex data pipelines, integrating diverse data sources, and supporting analytics environments. This role requires a strong foundation in ETL development, data modeling, SQL, and data interchange systems. Candidates must meet all minimum qualifications to be considered. Minimum Qualifications (Required) Candidates must meet all of the following: ✔ M1 — Education Experience developing and maintaining data interchange systems involving: • Flat files, • Direct database connections, • XML transactions Hands-on experience with ETL tools such as: • Informatica, Talend, SSIS, DataStage, Pentaho Experience designing: • Logical and physical data models, • Dimensional models (star/snowflake) Experience developing ETL pipelines specifically to support: • Data analytics, • BI environments Strong SQL experience including: • Complex joins, • Stored procedures, • Query optimization Preferred Qualifications (Nice to Have) P1 — Python scripting experience P2 — Tableau Server Administration (1+ year) P3 — Customer-facing experience in data validation, troubleshooting, or requirements gathering P4 — Statistics coursework or 1+ year using statistics professionally P5 — SQL or PL/SQL database development P6 — ETL pipelines supporting Tableau analytics P7 — ETL experience supporting a government data analytics program Key Responsibilities • Develop and maintain ETL pipelines to support analytics and reporting, • Integrate data from diverse sources including flat files, XML, and direct DB connections, • Design and optimize data models for analytics, • Collaborate with business users on data validation and requirements, • Support data quality, data governance, and troubleshooting efforts, • Work with BI teams to ensure data readiness for dashboards and reporting Required Skills • ETL development, • SQL (advanced), • Data modeling, • Data integration, • XML, flat files, relational databases, • Analytics-focused data engineering

Job DescriptionONLY CONSIDERING CANDIDATES WITH 5+ YEARS OF EXPERIENCE WHO RESIDE WITHIN A COMMUTABLE DISTANCE TO ALBANY, NY- NOT OPEN TO RELOCATION “Join GD Resources for dynamic opportunities in business management and IT, where innovation meets excellence.” About the Company: GD Resources is a Veteran Women-Owned Business Management and Information Technology company committed to excellence. GD Resources provides dynamic opportunities for veterans and professionals alike to contribute to innovative projects and drive success in a collaborative and supportive environment. Join us to make a difference, advance your career, and grow with a company that values integrity, diversity, and continuous improvement. Job Title: Senior Network Architect Task Order: HBITS-07-14336 Agency: State of New York – Office of Information Technology Services (ITS) Location: Hybrid – Albany, NY Duration: 24 Months Rate: Depends on experience Position Overview This HBITS role designs, builds, and supports large-scale, secure enterprise networks for State of New York operations. You’ll architect solutions aligned to NYS ITS technical/security standards, troubleshoot complex LAN/WAN issues, and guide field deployments. Deep experience with Cisco (IOS), routing (OSPF/BGP), VPNs (DMVPN/IPSEC), Wi-Fi platforms, and automation (Python/Ansible) is essential. Responsibilities • Architect network solutions that meet business needs and NYS ITS technical/security standards., • Troubleshoot and optimize LAN/WAN hardware for DOL; analyze logs, performance, and security., • Coordinate vendor and agency installs/configurations; pre-configure field devices., • Review existing architecture; recommend upgrades/replacements with detailed specs., • Provide L3 support for enterprise environments and update inventory in agency systems., • 5 years experience configuring and troubleshooting LAN Networking equipment in a complex networking environment of at least 1,000 remote endpoints that includes switches, routers/firewalls and VPN devices. This includes troubleshooting issues using protocol analysis tools (i.e. Wireshark) and conducting in-depth analysis on network data captures., • 5 years of experience in network engineering, configuring and troubleshooting DMVPN, IPSEC, OSPF, and BGP to support secure enterprise connectivity., • 5 years experience with Cisco hardware and Cisco IOS software in a complex TCP/IP environment including routing, port forwarding/NAT, VPN management., • 5 years experience supporting and configuring wireless network equipment from vendors such as Cisco/Meraki, Ubiquiti, Aruba., • Résumé, • Copy of candidate identification (driver’s license, passport, visa if applicable), • Degree/certifications (if applicable), • Three professional references ZIoJmoBszx

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Mid-level Geotechnical Engineer to join our team. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 3 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations

Job Description We are currently hiring a Senior Mechanical Engineer in our Building Engineering division at our Albany, Poughkeepsie, White Plains, or Brooklyn NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Mechanical Engineer will work with clients to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a mechanical leadership role for the office. Responsibilities • Supervise mechanical engineering staff to develop concepts, strategies, construction documents and engineering reports for new building renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including HVAC, plumbing, process piping systems and fire protection design., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing mechanical project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Full-time role based in Philadelphia, PA, Newark, NJ, or Albany, NY areas Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description Job Description We are seeking a Data Center Design Engineer to oversee new common system and infrastructure of installation / capacity augment projects. The candidate would be responsible for monthly common system capacity reporting for assigned facilities and day to day maintenance and PMs of assigned FirstLight facilities. This role has combined responsibility for data center process and compliance activities. The expectation is that the Data Center/Facilities engineer would oversee common systems, operations and maintenance of FirstLight facilities. They will coordinate projects with the Facilities Director, department managers and project managers. The duties listed require strict adherence to budgets and formal bid process. Job requirements include (but are not limited to): The main job function along with the facilities engineer responsibilities is to take a data center expansion project - designing, costing and construction of the new space. • Take a raw space and make it a colocation data center room., • Design, • Floor, • Ceiling, • Power, • Cooling, • Generator backup, • Switchgear, • Fire protection, • Bid process, • Construction, • Final turnup, • Responsible for maintenance and installation activities on major network infrastructure components, • Coordination and oversight of purchasing, installation, repair, and routine maintenance for each assigned facilities asset, • Coordination of internal resources, contractors/vendors for existing facilities and new construction, cabinet installations and service cross connections, • Monthly common system capacity reporting for assigned facilities, • SP Marketplace documentation of All Facilities / assets assigned, • Works with Network Design Engineering to facilitate clean SOW packages, Understands power and grounding, HVAC / UPS architecture fundamentals, • Network Facilities Technician must understand access procedures for all relevant sites under their area of operation, • Preventative maintenance / reporting for infrastructure components i.e., HVAC, Emergency Generators, transfer switching, remote gen set operation, maintenance, and interface connections, • Network Facilities Engineer has oversight of contract labor for end-to-end installation, test, turn-up, and maintenance of all infrastructure and common systems related projects, • Be available as Essential Personnel in emergency scenarios, • When necessary, assist Field Operations installation tasks, • Completes special projects and other duties as assigned, • Proficiency with SP Marketplace essential, • Basic understanding of test equipment i.e., Power/grounding / HVAC / UPS, all related / required testing equipment to conduct and troubleshoot the FirstLight infrastructure, • Ability to read and understand CLR’s, Floor plan diagrams and one line power diagrams, • Knowledge of inventory control protocols, • Experience in troubleshooting process [i.e. point to point analysis], • Knowledge of AC/DC power architecture and operational fundamentals, • Familiarity with industry standard installation practices [lacing and sewing, planning for network installations, ordering and gathering equipment, verifying and testing circuits, equipments and alarms] FirstLight, headquartered in Albany, New York, provides fiber-optic data, Internet, data center, cloud and voice services to enterprise and carrier customers throughout the Northeast connecting more than 13,000 locations in service with more than 125,000 locations serviceable by our more than 25,000-route mile network. FirstLight offers a robust suite of advanced telecommunications products featuring a comprehensive portfolio of high bandwidth connectivity solutions including Ethernet, wavelength, and dark fiber services as well as dedicated Internet access solutions, data center, cloud and voice services. FirstLight’s clientele includes national cellular providers and wireline carriers and many leading enterprises, spanning high tech manufacturing and research, hospitals and healthcare, banking and financial, secondary education, colleges and universities, and local and state governments. FirstLight Fiber is an equal opportunity employer. In accordance with state and federal laws, FirstLight’s equal opportunity policy is that all applicants and employees are treated equally by the company with respect to employment opportunities, regardless of race, color, religion, sex, sexual orientation, disability, or veteran status or veteran disability.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Precast Design Engineer • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Create meaningful community impact through engaging precast engineering projects while advancing your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Bridge Engineer– Civil/Structural Launch Your Career in Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career Bridge Engineer eager to build a strong foundation in bridge design and transportation engineering? Fisher Associates is seeking a motivated Bridge Engineer to join our collaborative Bridge and Transportation Engineering team. In this hybrid role, you will gain hands-on experience supporting bridge design, analysis, and transportation infrastructure projects that enhance safety, mobility, and connectivity in the communities we serve. You’ll also benefit from mentorship, professional development opportunities, and a clear path toward PE licensure. If you’re ready to take the next step in your engineering career and help design the bridges of tomorrow, we encourage you to apply today. About Fisher Associates: At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Engineer • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects that create positive community impact while offering diverse, challenging opportunities to grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Why This Role Matters: As a member of the BSE Team, the Electrical Engineer I supports and assists experienced engineers and other multidisciplined team members throughout the planning and design of a variety of projects. Those in this role assist in the design of building systems for projects across our practice areas, improving the built environment, and creating a more sustainable world in the process. Reporting to a Senior BSE Team Member, the BSE I participates in the production of associated project plans and specifications and provides oversight throughout the construction administration phase. You are moderately independent and work on projects of all project sizes and complexities. What You’ll Do: • Collect owner drawings and documentation, • Perform Codes and Standards review, • Set up and produce Revit drawings efficiently while using internal standards and templates, • Prepare drawings including plans, details, schematics, and schedules, • Review and understand existing drawings, determine limits of demolition work, and how new systems interconnect, • Perform site investigations and document existing conditions, • Implement changes to design or project documentation based on written or verbal descriptions from senior engineers, • Perform file management functions such as posting models, downloading model updates, and managing links, • Attend internal coordination meetings and communicate with other disciplines, • Attend client meetings along with senior team members and create meeting minutes, • Prepare draft engineering reports for review by senior staff, • Perform building condition evaluations and prepare reports, • Produces designs that have minimal QA/QC comments and minimal drawing presentation mistakes, • Avoids making repetitive design errors, • Demonstrates growth from project-to-project, • Prepare draft specifications, • Review and approve submittals with oversight, • Perform construction punch lists, • Perform accurate electrical load calculations to determine electrical system service and distribution system sizes, • Normal/emergency power, lighting, and systems design. Systems design includes the following: fire alarm, public address, nurse call, and tele/data., • Electrical equipment sizing and selections of panelboards and emergency power systems (generators and automatic transfer switches), • Electrical room layout considering fit, form, and function, • Utility company coordination, • Evaluate system types and review with senior staff, • Contact vendors for equipment selections and review selections for accuracy, • BS in Electrical Engineering or related field, or an equivalent combination of education and experience, • A minimum of four (4) years of experience, • Professional Licensure, • An ability to perform difficult technical computations and consolidate acquired data, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines, • Familiarity with building systems such as HVAC, plumbing, power distribution, lighting and low-voltage systems, and structural components, • Working knowledge of Revit and other relevant design programs, • Proficient in utilizing Microsoft Office tools, • Effective leadership, and strong verbal, written, and interpersonal skills, • Engineering, analytical, and technical writing skills with attention to detail, • Healthcare for you and your family: Medical, Dental& Vision insurance. Single HDHP Medical plan with 100% paid premium., • Health Savings Account (HSA) with employer match., • Medical and Dependent Care Flexible Spending Accounts., • Long-Term Disability Insurance Company/team member sharing., • FREE Life Insurance and AD+D Insurance + Voluntary Life Insurance for you and your family., • FREE Short-Term and Long-Term Disability Insurance., • PTO + Sick Time + 8 Holidays a year., • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Internal Mobility & Career Advancement. We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law.

Job Description HRP Associates, Inc. is seeking highly skilled and motivated Remedial Environmental Engineers with 10+ years of experience to join one of our offices in either Farmington, CT, Clifton Park, NY, Plymouth, MA, or Greenville, SC. Successful candidates will be responsible for designing and implementing remedial solutions for soil, groundwater, and soil vapor contamination projects. This role requires a strong technical background, excellent problem-solving skills, and the ability to work collaboratively with multidisciplinary teams. If this sounds like the career move you have been waiting to make and if you meet our qualifications, we want to talk with you! Responsibilities: • Develop and design remedial strategies for soil, groundwater, and soil vapor contamination, • Conduct site assessments, including soil and groundwater sampling and analysis, • Prepare detailed reports, including remedial design plans, cost estimates, and project schedules, • Oversee the implementation of remediation projects, ensuring compliance with environmental regulations and standards, • Collaborate with clients, regulatory agencies, and other stakeholders to ensure project success, • Monitor and evaluate the effectiveness of remediation efforts and make necessary adjustments, • Bachelor's degree in Environmental Engineering or a related field- Master's degree is a plus, • Must have a Professional Engineer (PE) license, • Minimum of 10 years of experience in environmental engineering, with a focus on remedial design for soil, groundwater, and soil vapor projects, • Familiarity with remedial technologies such as:, • In Situ Chemical Oxidation (ISCO), • Bioremediation, • Soil Vapor Extraction (SVE), • Air Sparging, • Permeable Reactive Barriers (PRBs), • Multi-Phase Extraction (MPE), • In Situ Stabilization (ISS), • Strong knowledge of environmental regulations and standards, • Proficiency in using environmental modeling and design software, • Excellent written and verbal communication skills, • Ability to work independently and as part of a team The vision of HRP Associates, Inc., is reliant on the expertise of our dedicated professionals who provide excellent consultation to our loyal clientele. We lead the industry in our commitment to employee growth and satisfaction in a positive, gratifying, and challenging workplace environment. We offer professional development opportunities, competitive salaries, and an excellent benefits package to qualified employees. We are always searching for top talent to join our growing team throughout HRP’s various locations. We constantly promote a fun and dynamic company culture, as well as a great work-life balance. Ideal candidates will enjoy working in team settings, participating in company-wide events and outings, possess a positive attitude, and can relate to our internal cultural motto of, “Work hard, play hard!” Other major benefits include: • Medical, Dental and Vision Coverage, • Life/Disability Insurance, • Company-sponsored Profit-Sharing Pension Plan, • 401(k) Retirement Plan, • Paid Holidays and Vacations Employee Resource Groups (ERGs) such as: • HRP Women - supports the professional and personal development for women employees while bringing awareness to women’s issues and fostering an inclusive environment., • 312 Committee - organizes employee events to support our culture and employee relationships, • Giving Group - coordinates events with local charities and organizations HRP Associates, Inc. is a full-service environmental engineering and hydrogeology firm headquartered in Farmington, CT, with regional offices in Derby (CT); Plymouth, Massachusetts; Saint Charles, Missouri; Clifton Park, New York; Greenville & Charleston, South Carolina; and Winston-Salem, North Carolina. We also have satellite offices in Charlotte, North Carolina; San Diego, California; and Houston, Texas. HRP's staff of professionals includes chemical, civil, geotechnical, and environmental engineers; inspectors; geologists; hydrogeologists; and industrial hygienists. For more information on job postings in all our offices and to find out more about the company, please visit our website at and our YouTube channel at . HRP is an Equal Opportunity/Affirmative Action Employer.

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Position Overview: The Hampton Inn Western Ave is seeking an experienced Maintenance Technician! As part of the Maintenance team, this position performs all necessary repairs and preventative maintenance as directed by the Chief Engineer/Engineering Supervisor, to maintain a safe, attractive, and efficiently operated hotel. He/she is responsible for performing other duties as assigned. Job Responsibilities: As a Maintenance Technician, you will be responsible for giving our guests the best hospitality experience you can by: • Completes maintenance requests in a timely manner. Works on improvement projects and preventative maintenance programs as directed., • Performs Suite Care, to maintain suites for guest satisfaction., • Performs exterior property maintenance, such as carpentry repair, painting, and all other functions necessary to the facility., • Exhibits friendly, caring attitude toward guest and co-workers., • Consistently leaves maintenance slip in guest suite when work is completed., • Practices safety throughout work shift by removing/correcting and hazards identified., • On call (emergency) rotation and works close with the housekeeping department., • Maintain high standards of personal appearance and grooming, which include compliance with Company dress code and wearing a nametag when working., • Always maintain a professional and friendly demeanor., • Must always be attentive, courteous, and efficient in the dealings with guests, managers and all other employees., • Establish and maintain good communications and teamwork with fellow employees and other departments within the hotel., • Routinely communicate with the Housekeeping Manager and all other employees on issues of maintaining the property in excellent condition., • Communicate with other hotel staff to accommodate special guest requests., • Comply with compliance standards and regulations to encourage safe and efficient hotel operations., • Responsible for maintaining the physical structure and grounds of the hotel property in like-new condition, including landscaping, walkways, pool area and sport courts, as directed by Engineering Manager., • Assign or handle maintenance requests, improvement projects and develop preventative maintenance programs., • Must be able to use two-way radios, telephones, general office equipment and various types of maintenance equipment., • Follow compliance with company standards, safety rules, and health and sanitation regulations., • Previous hotel or related field maintenance experience is required., • A working ability with HVAC, electrical, plumbing, and carpentry is needed, and formal training in at least one of these disciplines is preferred., • English skills are required., • All state and local age and licensing requirements must be met prior to operating and handling any hand or power tools, torches, chemicals, etc., as well as for driving the hotel van., • Must have a valid driver’s license., • Long and flexible hours are sometimes required., • Must be able to work evenings, weekends, and holidays as needed., • Heavy work - Exerting up to 100 pounds of force occasionally, up to 50 pounds of force frequently and up to 20 pounds constantly to lift, carry, push, pull, or otherwise move objects., • Ability to stand during the entire shift., • Ability to reach overhead, utilize both hands, bend over, and stoop and kneel., • Must be capable of climbing and descending stairs during their shift., • Must be able to understand and follow directions, guidelines, and work objectives as set forth by the Engineering Manager., • Must be able to understand the potential hazards and subsequent procedures involved in working around commercial chemical agents and various types of machinery., • Must use common sense and integrity in ensuring the security of guest belongings while working in occupied suites., • Must be able to work in a self-managed and self-directed environment. Powered by JazzHR m8JMtnZQnh

Job DescriptionCloud Systems Architect Employment Type: Full-Time, Mid-levelDepartment: Information Technology We are seeking a Cloud Systems Architect with experience with cloud infrastructure to engineer and support public, private and hybrid clouds. The ideal candidate will be proficient in a variety of cloud hosts including Amazon Web Services and Microsoft Azure at a minimum. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- The candidate will be knowledgeable of the most recent updates and developments and act as an advisor to our customer in reference to the cloud management strategies to be employed to take advantage of the benefits offered by cloud computing such as being able to function without any restrictions to the workload, initiate as many workstations as necessary per time period and pay only for what they actually use. - The candidate will also work with the IT Security team to manage and maintain cloud systems security of the data and network resources. - The candidate will also be responsible for engineering on customer premise applications and systems interconnected to cloud resources. - Designs and defines system architecture for new or existing complex computer systems. - Determines systems specifications, input/output processes, and working parameters for hardware/software compatibility and maintenance of system security. - Coordinates design of subsystems and integration of total system. Identifies, analyzes, and resolves program support deficiencies. - Develops and recommends corrective actions. - May provide technical guidance for database administrators and software developers. Qualifications:- Experience with and a complete understanding of the technology required for cloud computing.- Experience with the skills to migrate applications to the cloud.- Be able to build relationships between the customers and the team members.- The ability and the knowledge to integrate services and tools to any and all areas to be used such as networks and data processing.- The ability and the knowledge to implement security information and event management to keep the customer's assets safe.- Experience with meeting or exceeding the requirements of cloud provider service-level agreements Experience with AWS and Azure.- Knowledge of a multitude of programming languages including Python, PHP, Java, Node and Ruby on Rails.- Typically a Bachelor's Degree and 6 years work experience or equivalent experience. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board: For more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We're adding to our team! We are seeking a Principal Engineer who has a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Within 3 hours driving time of Albany, NY You will: • Lead a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team., • Anticipate and provide solutions to the customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • BS Engineering degree., • Hands on experience executing automation projects for process plants, minimum of 8-10 years in industry, preferably in Life Sciences domain., • GMP, controls design, and facility start-up, • Rockwell, Ignition, Servers, • Understanding of recipe development in a Batch/DCS,, • Experience programming equipment phases within ControlLogix PLCs., • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job Description Engineering data centers with precision and expertise. At Strategic Mission Critical, we are more than just engineers; we are experts focusing solely on mission critical facilities. Our seasoned leadership team brings together decades of experience, equipping data center providers worldwide with robust, reliable solutions that keep pace with the evolving digital landscape. With a rapidly expanding market and the anticipated increase in demand driven by AI advancements, SMC is at the forefront of industry growth. We offer not just jobs, but career paths that reward innovation and expertise. If you want to work alongside highly skilled professionals with years of mission critical experience, then we want you to be part of our team, a team that works on major projects for top-tier data center providers. Your work will ensure the resilience and efficiency of data infrastructure that millions depend on. SMC is actively looking for an Entry Level Electrical Engineer / Designer to help execute electrical design for mission critical projects. Typical project types may include design of greenfield and brownfield data center facilities, design of fit-out packages for hyperscale and enterprise clients of colocation providers, data center campus planning, conceptual designs and feasibility studies, and power systems studies such as Neher-McGrath, short circuit, coordination, and arc flash. This candidate will execute specific design tasks as part of a broader electrical team while furthering their own knowledge and developing their skills. The candidate will typically work under the guidance of senior and/or mid-level engineers. The electrical design scope will be a part of a broader project and therefore this candidate will learn to interface with design leads within SMC (mechanical, telecommunications, fire protection, plumbing) as well as externally including architectural, civil, structural, etc. The ideal candidate has a strong work ethic, is eager to learn, and wants to grow their expertise and career at as rapid a pace as suits them. This position is open to full time, part time, and internship/co-op applicants. RESPONSIBILITIES This candidate will have the opportunity to execute specific electrical design tasks for various project types while working and coordinating with clients and design leads from all disciplines. This candidate shall have the ability to communicate effectively with co-workers and with clients while being able to meet scheduled project deadlines. They will be a self-starter not afraid to do independent research in addition to directly-assigned project work in order to further their career growth. Responsibilities include but are not limited to: • Assist with the design and drawing of electrical infrastructure for mission critical buildings and campuses including medium voltage distribution; highly redundant power systems including various redundancy topologies such as distributed and block redundant; on-site generation and UPS backup; typical building systems such as small power, lighting, grounding, and fire alarm., • Assist with coordination between internal and external disciplines for required electrical power connections to equipment., • Review and understand client standards, design criteria, applicable codes, and best practices and work with senior engineers to understand how they impact the design of each project., • Review and gain an understanding of local and national construction codes and project specifications to grow a broader understanding of the construction process., • Utilize Autodesk Revit on a daily basis to produce detailed design documents., • Have experience with the use of Microsoft tools such as Word, Power Point, Excel, and Teams., • Meet project deadlines, including working necessary hours to complete major deliverables., • Have the ability to travel when required to project sites and/or meetings (less than 10% travel)., • Have the ability to clearly communicate with others in both written and spoken forms., • Be willing to take direction from senior and mid-level engineers and designers in order to execute delivery of specific design elements., • Be an active participant in training and mentoring opportunities in order to grow knowledge and capabilities., • 2 or 4-year degree in electrical engineering or electrical engineering technology preferred, electrical construction experience with a drafting certification will be considered as well., • Past internship, co-op, or work experience in consulting engineering role is a plus., • Experience working in the construction industry is a plus., • Experience using Revit in either an educational or professional context is a plus. Base Compensation: $45,000-$150,000 (Actual compensation is subject to variation due to factors such as education, experience, skills, and/or location) SMC offers a competitive benefits package, with a 36-hour standard work week, hybrid working arrangement, 13 paid holidays, 100% coverage of medical, health, and dental insurance premiums for our full-time employees, and reimbursement of professional licensing costs. Spouse and family insurance premiums are subsidized by SMC. All full-time employees are additionally eligible for employer-sponsored life and long-term disability insurance as well as participation in our 401(k) plan, with annual safe harbor contribution.

Job DescriptionDescription: Fisher Associates is seeking a Senior Highway Transportation Engineer (PE) with 20+ years of progressive highway and roadway design experience, including NYSDOT projects, to serve as a technical leader within our Infrastructure + Mobility team. This role is well suited for a seasoned Professional Engineer who is driven by technical excellence, sound engineering judgment, and the opportunity to shape meaningful transportation improvements within the communities we serve. With a strong backlog of transportation work and a major upcoming NYSDOT project, this role offers immediate involvement in high-profile, technically complex assignments for state and municipal clients. As a Senior Highway Engineer, you will serve as a technical authority on roadway reconstruction, corridor improvements, intersection upgrades, and other transportation infrastructure projects. You will provide advanced design oversight, ensure quality and regulatory compliance, guide engineering standards, and mentor staff while strengthening our transportation practice. This position offers the opportunity to apply your expertise to impactful projects you can see take shape, delivering roadway solutions that enhance safety, mobility, and long-term performance across the region. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Senior Highway Transportation Engineer • Serve as senior technical lead and subject matter expert for the development of highway design plans and construction cost estimates for new and rehabilitation projects., • Perform and oversee advanced geometric roadway design, including alignments, profiles, cross-sections, grading, and interchange layouts., • Manage complex design challenges independently., • Serve as the technical authority conducting comprehensive reviews to ensure quality, constructability, and compliance with applicable standards., • Opportunity to serve as Engineer of Record, assuming full responsibility for the technical integrity of roadway design documents., • Ensure compliance with state and local design standards, regulations, and safety requirements., • Support project managers in maintaining scope, schedule, and budget alignment., • Provide technical support during construction, including responding to RFIs and participating in site visits., • Lead coordination with clients, subconsultants, regulatory agencies, and internal teams., • Professional Engineering License (PE), • B.S. degree in Civil Engineering or related field (MS preferred), • 20+ years of progressive highway design experience, • Advanced proficiency in MicroStation or OpenRoads., • Experience working with and adhering to NYSDOT design standards, • Demonstrated experience serving as senior technical reviewer and design authority., • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation will vary based on experience, qualifications, and other factors. The listed salary range does not guarantee specific pay or reflect total compensation and excludes the value of benefits. Why You’ll Love Working at Fisher • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Lead meaningful highway design work, influence technical standards, and grow your career within a firm that values expertise and leadership. We offer competitive compensation and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid #LI-CA1

Job DescriptionDescription: Why this role existsWe deliver in-building wireless (DAS), small-cell, and network integration projects that require on-site RF expertise for surveys, install & turn-up, optimization, and acceptance testing—often in active facilities (healthcare, enterprise campuses, carrier COs) where precision, safety, and documentation are critical. What you’ll do (key outcomes) • Own on-site RF work: perform pre-integration site surveys; validate head-end/POI equipment; confirm fiber/RF connectivity; and plan the “last-mile” details for successful turn-up. ?, • Install & integrate radio interfaces and DAS components (e.g., Radios, jumpers, POI connections), coordinate power/fiber, and complete on-site configuration for go-live. ?, • Execute RF testing: line sweeps, return loss/VSWR, PIM, and over the air performance checks; interpret results and drive corrective actions to hit pass/fail criteria. ?, • Optimize and troubleshoot live systems; collaborate with tower/field crews to resolve issues efficiently and safely., • Document relentlessly: produce pre-/post-integration reports, annotated photos, speed-test captures, and close-out packages that stand up to customer audits. ?, • Coordinate materials/BOM with project leads as needed (e.g., grounding hardware, RF terminations, jumpers) to keep site work unblocked. ? Requirements: What you’ll bring (minimum qualifications) • 2+ years in RF field work (DAS, small cell, or macro), including hands-on terminations & testing with PIM/line sweep tools and interpretation of VSWR/return-loss data. ?, • Working knowledge of DAS head-end/POI architecture, RF jumpers/connectors, and fiber hygiene and validation practices. ?, • Ability to read MOPs, one-lines, and test plans; strong documentation habits for customer-ready deliverables. ?, • Comfortable collaborating with field crews and following established jobsite safety practices., • Ability to perform, interpret, and post-process scanner and test phone tests., • Valid driver’s license and ability to travel within UPNY or OH markets (overnight travel as needed).Nice to have, • OEM or carrier certifications related to DAS. ?, • Experience preparing BOMs/material requests (e.g., grounding kits, RF terminations) and coordinating with supply chain., • Familiarity with acceptance criteria/checklists used in RF standards. ?, • Comfort working in customer environments like hospitals, malls, campuses, or carrier central offices.Work & travel, • Work split: ~50% in the field / ~50% office or remote., • Field presence: ~50% (site surveys, install/integration, testing, optimization)., • Core markets: Upstate NY and Ohio; occasional travel to adjacent markets by project assignment., • RF analyzers for line sweep/return-loss and PIM testing; fiber inspection/cleaning kits; standard RF jumpers and connectors; DAS head-end/POI equipment; structured reports and close-out templates consistent with our pre-integration and acceptance workflows.

Job DescriptionCompany Description Who are we? At Scalian, we are a leading multinational engineering consulting firm with 6,000 specialists and over 35 years of experience. We are specialized in Industrial Performance (Quality Assurance, Supply Chain, and Project Management) and Digital Systems (IT & Software and Systems Engineering). Our expertise serves various technological sectors such as the aerospace, defense, rail, and energy industries while providing distinctive support to their development and operations. Are you an experienced Quality Engineer? If your answer is yes, it’s your lucky day as we are looking for a dynamic and talented person to join our team in the US! What will your role be? We are seeking a detail-oriented and highly organized Quality Engineer (QE) to join our team. The QE serves as a technical leader, working cross-functionally with Engineering, Operations, Planning, and Supplier teams to ensure the organization achieves its quality and delivery objectives. In this role, you will leverage strong analytical and problem-solving capabilities to address quality issues, drive continuous improvement, and ensure products and processes meet customer, regulatory, and internal standards. You will identify process gaps, mitigate risks, and implement improvements that enhance product reliability, operational efficiency, and overall customer satisfaction. Job Description • Ensure customer requirements are clearly understood, implemented, and fully met, • Lead and coordinate new product launch and engineering design changes as assigned, • Supervise daily activities of quality inspectors and auditors, enhancing quality control processes to maintain high product standards, • Investigate customer complaints and product returns while supporting effective customer communication, • Drive continuous improvement initiatives to enhance customer satisfaction and competitiveness using Six Sigma and Lean methodologies, • Support internal and external audit activities to ensure compliance with applicable standards and regulations, • Contribute to the definition and implementation of product quality and reliability standards, • Support supplier quality initiatives and continuous improvement efforts, • Collect, analyze, and interpret statistical data related to product performance and reliability, • Develop and implement corrective and preventive action plans, • Partner with cross-functional teams to maintain PFMEAs, Control Plans, and risk-based quality tools, • Perform configuration audits, process capability analyses, and trend/risk assessmentsQualifications, • Bachelor’s degree in Engineering, Quality Assurance, or a related field preferred, • Minimum of 5+ years of experience in Quality Engineering, Process Engineering, or Engineering Project Management within a manufacturing environment, • Strong knowledge of quality management systems, regulatory requirements, and inspection processes (ISO/AS standards preferred), • Experience with root cause analysis and supporting corrective and preventive actions, • Familiarity with PFMEAs, Control Plans, GD&T, and CMM programming preferred, • Proficiency with inspection tools such as calipers, micrometers, CMM, and imaging systems, • Experience with MS Office, Oracle, Minitab, and SQL, • Strong organizational skills with the ability to manage multiple priorities in a fast-paced environment, • Excellent collaboration, written, and verbal communication skills, • ASQ Certified Quality Engineer certification preferred, • Willingness to travel to address customer and/or supplier-related issues, • Demonstrated commitment to safety, compliance, and continuous improvement Additional Information • To acquire experience in different critical industries and projects while working for the same company;, • To have a competitive salary and a great benefits package, • To access trainings that focus on expanding your knowledge while staying up to date with cutting edge technologies and best practices;, • To have a clear career development plan that suits your goals;, • To have the possibility of working abroad through our mobility program thanks to our international presence;, • To join a dynamic, specialized and fast-growing group where communication is key and where every team member is valued, • To be part of a team where having fun is essential #LI-GO1

Job Description About NECI NECI is the leading Automation solutions provider transforming manufacturing, lab operations, process development and process control across a range of process industries in Northeast. NECI relentlessly seeks to drive the outcomes that ‘change the game’ for our clients and is seeking team members to join in our mission. The Role We are currently looking for an Application Engineer II who will support customer process control needs by pursuing sales opportunities individually, and by partnering with Account Managers and Sales Associates in obtaining product orders. The individual in this role will ensure high levels of customer service and satisfaction in accordance with our “Think Customer” principles. What You’ll Do * Propose and sell customer solutions by listening to and evaluating our customer’s requirements and selecting and proposing innovative control solutions according to our customer’s and principal's standards and practices. * Grow our valve automation business to meet annual company sales goals targets in our coverage area by promoting and fostering NECI's reputation as a total valve supplier for ball valves, butterfly valves, valve automation, and solutions. Includes participating in training, developing a sufficient knowledge base of all product lines our company represents, being able to readily access all necessary information to develop and price valve automation solutions, and demonstrating a satisfactory competency level to meet the expected standards of performance necessary to deliver valve automation solutions to our customer base in a timely manner. * Achieve desired sales results for annual new product initiatives by participating in NECI and principal new product launches, probing and uncovering customer needs and pain points, and applying our new technology and product solution offerings. * Provide support & technical services to customers by assisting users with start-up, checkout, and calibration, and resolving product and/or service problems based on our principal's standards and practices and NECI’ internal procedures. Additionally, being responsible and accountable for following through on all customer orders, returns, credits, and invoicing issues etc. to a satisfactory resolution in accordance with Think Customer principals. * Support on time delivery to customers by assessing customers’ needs, determining the factories’ abilities to meet those needs, and negotiating mutually agreeable due dates with the customer. As appropriate, to also assist in expediting products and services with our suppliers and principles in order to meet or exceed committed customer expectations. This includes anticipating or recognizing situations or circumstances when total customer satisfaction is at risk and taking ownership of resolution. * Identify new sales opportunities and ensure consistent service by maintaining accurate customer information data utilizing IFS and identifying and qualifying new opportunities with our customers, and fully supporting our Account Managers’ plans and strategies for account growth and penetration. * Understand and actively participate in our quality management system by adopting our quality policy and all appropriate elements of our quality management system, dedicating your efforts to the reduction, elimination, and prevention of quality deficiencies, and initiating proper actions to prevent the occurrence of nonconformities related to our products, services, processes, and quality system. This also includes your timely participation as required in Corrective and Preventive Action Requests, Quality Circles/Teams, and collaboration with other Company Departments on continuous improvement initiatives. * Participate in the company’s safety and health program by understanding and following the established policies and procedures of our Safety and Health Manual, notifying appropriate Supervisors/Managers of any observed workplace safety and health compliance issues, and implementing appropriate recommendations to help improve our Company’s overall Safety and Health Program. * Maintain and develop professional and technical competence by attending periodic factory or principal-based training sessions, appropriate web-based training classes/seminars, periodic “hands-on” training, departmental meetings, as well as periodic professional development workshops or classes. * Inform supervisor/manager and appropriate NECI personnel of market conditions\ providing timely reporting of key customer and competitor activities within the territory. * Contribute to overall team effort by participating in the pursuit and accomplishment of Company and Departmental Goals as part of the Company’s Annual Strategic Business Plan and accomplishing related results. * Safety & health coordinator (as applicable) by Performing safety and health site coordinator duties as defined in the Safety and Health Manual What You’ll Bring • Bachelor’s Degree in Engineering: Mechanical, Industrial, or Chemical, • 3-5 years of relevant work experience, • Competitive Spirit: while sales are compensated for a job well done, we are seeking someone self-motivated and driven by the pursuit and satisfaction in exceeding goals and delivering growth to the business., • Highly competitive Medical, Dental, and Vision Insurance, • Flexible Spending or Health Savings Accounts, • Unlimited Vacation Time, • 10 Paid Holidays, • 12 Paid Weeks Maternity Leave, • Pet Insurance, • Retirement Savings: 401(k) and Employee Stock Ownership Plan, • Employee Referral Bonus, • Professional Development Reimbursement Must be currently authorized to work in the United States. Policy on Third-Party Unsolicited Resume Submissions: Please note that any third-party unsolicited resume submissions will immediately become the property of Stellix and its affiliates. Stellix and its affiliates will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Please Note: Stellix and its affiliates is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status or any other characteristic protected by law.

Job DescriptionTeam Description: Kitware is seeking a Software Developer with CMake experience for the Software Solutions team. Kitware works in a variety of exciting scientific computing domains, including computer vision, scientific visualization, and high-performance computing, medical imaging, data and analytics, and high-quality software process development. This position offers an opportunity to help Kitware’s customers build meaningful software that will stand the test of time. Through this position, you will work alongside our talented software developers, algorithm experts, external collaborators, and customers. About the Projects:We are looking for talented individuals who will support the software application needs of our customers and internal teams. The types of projects we work on include, but are not limited to:- Integrating Kitware’s open source software into commercial applications- Extending our open source toolkits to meet customer needs- Proposing new solutions for real-world applications- Supporting customers by providing expertise on software developmentIn This Position You Will: • Help customers create CMake-based build systems, • Contribute to the Open Source CMake program, • Contribute your strong programming ability and experience to develop robust solutions for real-world problems, • Collaborate with customers on projects to improve and develop build systems for large C++ and mixed-language projectsRequired Qualifications:, • Bachelor's degree + 2 years or Master's degree + 1 year in Computer Science, Electrical and Computer Engineering, or related field, • Experience with the compiled language build process for C++, • Experience with the CMake build tool, including the CMake language, • Proficient programming skills and experience with C++, • Ability to develop software for Unix, Linux, MacOS, and/or Windows operating systems, • Due to contractual restrictions, only candidates who are US Persons (citizens, permanent residents, asylees, or refugees) will be considered for this positionPreferred Qualifications:, • Experience using Github or Gitlab for code reviews, documentation, and release management, • Experience with CI/CD systems and automated testing, • Interest and experience in open source software development

Job DescriptionTeam Description: Kitware is a leader in advanced research and algorithm development in artificial intelligence (AI), spanning computer vision (CV), natural language processing (NLP), vision-language models (VLMs), and other generative AI technologies. Our solutions embracing AI add measurable value to government agencies, commercial organizations, and academic institutions worldwide. We have developed a deep understanding in extracting useful, actionable information from multiple data sources like images, video, metadata, audio, and text, and we recognize the need for robust, affordable solutions. We seek to advance AI, CV, and other related fields through research and development and collaborative projects that can contribute to our open source software platforms, such as XAITK, NRTK, and GeoWATCH. About the Projects: Kitware’s employees have unique opportunities to interact and collaborate directly with customers, visit interesting customer sites, and participate in live field tests and demonstrations. Much of Kitware’s work involves applying state-of-the-art artificial intelligence approaches to dynamic, real-world problems. We consider the work that we do on our government contracts as one of the ways that we give back to the community. We partner with premier government R&D agencies such as DARPA, IARPA, AFRL, Army C5ISR, NOAA, and other branches of the US Government on a range of efforts, including prime contracts, SBIRs, and STTRs. In addition, we provide commercial services to companies ranging from startups to Fortune 500 companies. Kitware employs an open source business model to foster extended, collaborative communities and to provide effective, flexible, and high-quality technical solutions.In This Position You Will: • Collaborate with researchers on projects related to machine learning, artificial intelligence, and computer vision, • Perform rapid prototyping and enhanced development to be integrated into operational systems, • Contribute your strong programming ability and experience to develop robust solutions for real-world problems, • Validate, optimize, and deploy advanced exploitation algorithms, • Perform troubleshooting, bug fixes, and maintenance of existing and new code to ensure stability and robustnessRequired Qualifications:, • Bachelor's degree or Master's degree in Computer Science, Electrical and Computer Engineering, or related field, • Proficiency in Python, • Experience with deep learning libraries (PyTorch, TensorFlow, etc.), • Strong background in both classical and modern (deep learning) machine learning, including model selection, architecting, training, validation, testing, and deployment, • Machine learning experience using visual data, • Understanding of a variety of machine learning tasks, e.g. Object Detection, Segmentation, Re-Identification, Tracking, Pose, Super Resolution, Natural Language Processing, • A high level of comfort with academic literature and the ability to adapt research products to solve real-world problems, • Due to contractual requirements, only US Citizens will be considered for this position, • If not already cleared TS/SCI, willingness and ability to apply for and maintain a TS/SCI security clearance, • Some travel is required, typically 5-25%, • Full-time on-site work at the Kitware OfficePreferred Qualifications:, • Active SECRET, TS, or TS/SCI security clearance, • Experience curating quality, real-world datasets for training deep learning models

Job Description Job Opening: Senior Mechanical Engineering Consultant Engineering data centers with precision and expertise. At Strategic Mission Critical, we are more than just engineers; we are experts focusing solely on mission critical facilities. Our seasoned leadership team brings together decades of experience, equipping data center providers worldwide with robust, reliable solutions that keep pace with the evolving digital landscape. With a rapidly expanding market and the AI adoption driving huge growth in the data center market, SMC is at the forefront of industry growth. We offer not just jobs, but career paths that reward innovation and expertise. If you want to work alongside highly skilled professionals with years of mission critical experience, then we want you to be part of our team, a team that works on major projects for top-tier data center providers. Your work will ensure the resilience and efficiency of data infrastructure that millions depend on. SMC’s Solutions Team is actively looking for a Senior Mechanical Engineering Consultant to support live mission critical operations and manage commissioning services for mission critical projects. Typical project types may include in-depth audits of live data center facilities, root cause analysis (RCA) investigations, operations training, auditing project deliverables, oversite of project commissioning firm for ownership, and commissioning process guidance for contractors. This candidate shall be capable of analyzing mission critical system operations offering technical guidance to resolve identified deficiencies in efficiency, operation, or maintenance, evaluating and conduct training for facility operations staff, and reviewing design and construction deliverables for accuracy and quality. Additionally, this candidate shall be skilled in building commissioning management for assisting data center providers in onboarding commissioning agents, defining deliverables, schedule, and testing rigor, and guiding contractors through the commissioning process. The ideal candidate will also be involved in growing the expertise within the company, through internal training; development and implementation of design standards; oversight and execution of quality control practices. RESPONSIBILITIES This candidate will have the opportunity to engage with client’s construction and operations teams bring engineering guidance and commissioning expertise out into the field. This candidate shall have the ability to communicate effectively with co-workers and with clients while being able to meet scheduled project deadlines. Responsibilities include but are not limited to: • Audit facility mechanical equipment and systems for end-of-life replacement, sale/purchase, and maintenance efficacy., • Perform technical analysis of mechanical systems operation versus design intent and efficiency opportunities., • Conduct quality reviews of project documentation such as Testing, Adjusting, and Balancing (TAB) reports, commissioning reports, O&M procedures, etc., • Oversee commissioning agent engagement, deliverables, and execution., • Lead others through the commissioning process including documentation, scheduling, and logistics., • Meet project milestones, including working necessary hours to conduct scope., • When required, travel to project sites to conduct scope (approximately 30-50% travel)., • Clearly communicate with others in both written and spoken forms., • Lead other engineers and consultants coordinating the tasks of multiple teams to execute project delivery of several projects simultaneously., • Mentor and train other engineers and consultants to develop knowledge base., • Be able to work independently while coordinating with senior personnel and other disciplines., • Maintain a strong working knowledge of mechanical systems., • Maintain excellent organizational skills, with the ability to manage multiple tasks simultaneously. QUALIFICATIONS • Preferred four (4) year degree in mechanical engineering or architectural engineering with a mechanical focus. Two (2) year degrees and MET degrees with work experience will be considered., • Minimum ten (10) years of experience in engineering consulting or building commissioning., • Experience in larger industrial and commercial buildings is preferred, with experience in mission critical a strong emphasis., • Familiarity with chilled water, airside, plumbing, fire protection, and fuel oil systems is of high importance., • Experience working across the entire construction process, from schematic design through construction administration, including review of design drawings, specifications, and submittals, and field work such as site surveys, site observations, and punch lists., • Experience interfacing with client, contractor, and operation teams is strongly preferred., • Strong knowledge of controls and monitoring systems for mechanical systems is an emphasis., • Experience with commissioning management tools such as CxAlloy and BIM360 and construction management tools such as Procore, Autodesk Construction Cloud, and Helix., • Professional Engineer (PE) License or Engineer-In-Training (EIT) path to PE is a plus; however unlicensed candidates with appropriate on-the-job experience are welcome to apply., • Have experience with the use of Bluebeam and Microsoft tools such as Word, Power Point, Excel, and Teams. COMPENSATION Base Compensation: $150,000 - $300,000 Annually (Actual compensation is subject to variation due to factors such as education, experience, skills and/or location) SMC offers a competitive benefits package, with a 36-hour standard work week, hybrid working arrangement, 13 paid holidays, 100% coverage of medical, health, and dental insurance premiums for our full-time employees, and reimbursement of professional licensing costs. Spouse and family insurance premiums are subsidized by SMC. All full-time employees are additionally eligible for employer-sponsored life and long-term disability insurance as well as participation in our 401(k) plan, with annual safe harbor contribution.

Job Description SENIOR MECHANICAL ENGINEER / PROJECT MANAGER (15+ years of experience) BBS is currently seeking a Senior Mechanical Engineer/Project Manager for the firm’s Albany office. This senior-level position is perfect for an independent professional who will be responsible for the day-to-day organizational, technical and production aspects for projects of varying types, complexities, scopes and budgets, and will be required to "shepherd" the project development process from conceptual design through substantial completion and final closeout. Working at BBS, you are part of a multi-disciplined firm with a wide range of consulting services located in-house, successfully delivering building and site projects for clients predominantly with K-12/higher educational backgrounds for over 40 years. With 75% of our valued staff being employed at BBS for over 10 years, and many for over 20 years, our vision is long term, and it includes the most talented individuals in the industry. At BBS you will contribute to a wide range of projects that help our clients understand the challenges placed before them today while connecting them to the future. We support a workplace culture that encourages innovation, creativity and camaraderie. BBS Architects, Landscape Architects & Engineers, P.C. is Long Island-based, ENR New York Top 100 design firm that continually strives for excellence in providing integrated architectural, landscape architectural and M/E/P engineering solutions to help our clients successfully plan, design, and build their projects. WHO ARE WE LOOKING FOR? We are looking for an ambitious and dedicated self-starter with extensive experience in the A/E/C environment. The selected candidate will be a licensed engineer with a minimum of 15 years of successful project management experience on K-12/higher educational and other type of projects. The candidate will also have successful experience with the direct management of employees including other Senior Engineers/Project Managers, project-level architects and engineers, technical designers, and a demonstrated success in winning new business. The candidate should have a dedication to the profession with a strong, self-driven desire to progress. DUTIES AND RESPONSIBILITIES: * • Independently manages projects from conceptual design through construction closeout, multiple at one time. Provides support on larger projects to other Senior Project Managers., • Leads in-house design teams of project engineers, project designers, technicians and outside consultants, and works well with Construction Managers and client representatives., • Assesses, understands and designs building engineering systems, i.e. building HVAC, heating plant, piping and plumbing systems., • Provides, coordinates and oversees production of construction documents and technical specifications for public bidding. Follows production schedules and is able to meet multiple simultaneous deadlines., • In charge of all Construction Administration on assigned projects including but not limited to adhering to public bidding procedures, Contractor submittal review and management, payment requisition review, attending project meetings, field visits, coordinating with multiple trades/contractors., • Delivers projects that comply with all applicable codes, standards and regulations., • Supports project administration activities including but not limited to staffing projections, time requirements, project fees, cost estimating, billing., • Applies quality, cost, and time control measures as necessary to ensure highest level of client satisfaction., • Supervises other project staff and technical teams of different disciplines, sizes, and skill-levels., • Bachelor of Mechanical Engineering degree or equivalent., • 15 years of experience as a professional engineer (PE)., • Minimum 5 years of HVAC design experience and minimum 10 years of project management experience in consulting environment., • Understand the process and workflow of an A/E project team, work within established cost budgets., • Excellent verbal, written and visual communication skills. Self-driven desire to grow professionally, independence, strong leadership and organizational skills, ability to set and adhere to goals. High-level time management capabilities, meet multiple simultaneous deadlines, delegate tasks, conflict mitigation, client interaction and negotiations, training of staff as needed., • Public presentation capabilities, travel/driving required, occasional night meetings., • High-level of proficiency in AutoCAD and MS Office. Knowledge of Revit advantageous., • Successful project track record in the local A/E/C industry within the Capital District, Hudson Valley, Mohawk Valley and Central New York regions. Experience in interacting with various level government agencies and municipalities is a plus., • Comprehensive, competitive compensation package., • Group health insurance, dental insurance, and vision insurance plans, • Health and Dependent Care Flexible Spending Accounts (FSAs), • Company-paid group life insurance., • Supplemental life, spousal and dependent life and AFLAC plans available., • 401k plan., • Company-paid vacation and sick/personal time., • Professional development program, professional licensing/certifications reimbursement. If Interested, please send resume to Fred Seeba, PE at BBS is an Equal Opportunity Employer. All qualified applicants are encouraged to apply and will be considered without regard to age, race, creed, color, national origin, ancestry, martial status, affectional or sexual orientation, gender identity or expression, disability, nationality or sex.

Job Description Senior Electrical Engineer BBS is currently seeking a Senior Electrical Engineer/Project Manager for the firm’s Albany office. This senior-level position is perfect for an independent professional who will be responsible for the day-to-day organizational, technical and production aspects for projects of varying types, complexities, scopes and budgets, and will be required to "shepherd" the project development process from conceptual design through substantial completion and final closeout. Working at BBS, you are part of a multi-disciplined firm with a wide range of consulting services located in-house, successfully delivering building and site projects for clients predominantly with K-12/higher educational backgrounds for over 40 years. With 75% of our valued staff being employed at BBS for over 10 years, and many for over 20 years, our vision is long term, and it includes the most talented individuals in the industry. At BBS you will contribute to a wide range of projects that help our clients understand the challenges placed before them today while connecting them to the future. We support a workplace culture that encourages innovation, creativity and camaraderie. BBS Architects, Landscape Architects & Engineers, P.C. is Long Island-based, ENR New York Top 100 design firm that continually strives for excellence in providing integrated architectural, landscape architectural and M/E/P engineering solutions to help our clients successfully plan, design, and build their projects. WHO ARE WE LOOKING FOR? We are looking for an ambitious and dedicated self-starter with extensive experience in the A/E/C environment. The selected candidate will be a licensed engineer with a minimum of 15 years of successful project management experience on K-12/higher educational and other type of projects. The candidate will also have successful experience with the direct management of employees including other Senior Engineers/Project Managers, project-level architects and engineers, technical designers, and a demonstrated success in winning new business. The candidate should have a dedication to the profession with a strong, self-driven desire to progress. DUTIES AND RESPONSIBILITIES: * • Independently manages projects from conceptual design through construction closeout, multiple at one time. Provides support on larger projects to other Senior Project Managers., • Leads in-house design teams of project engineers, project designers, technicians and outside consultants, and works well with Construction Managers and client representatives., • Assesses, understands and designs building engineering systems, i.e. building power, lighting, low-voltage systems and photovoltaic project systems., • Provides, coordinates and oversees production of construction documents and technical specifications for public bidding. Follows production schedules and is able to meet multiple simultaneous deadlines., • In charge of all Construction Administration on assigned projects including but not limited to adhering to public bidding procedures, Contractor submittal review and management, payment requisition review, attending project meetings, field visits, coordinating with multiple trades/contractors., • Delivers projects that comply with all applicable codes, standards and regulations., • Supports project administration activities including but not limited to staffing projections, time requirements, project fees, cost estimating, billing., • Applies quality, cost, and time control measures as necessary to ensure highest level of client satisfaction., • Supervises other project staff and technical teams of different disciplines, sizes, and skill-levels., • Bachelor of Electrical Engineering degree or equivalent., • 15 years of experience as a professional engineer (PE)., • Minimum 5 years of electrical design experience and minimum 10 years of project management experience in consulting environment., • Understand the process and workflow of an A/E project team, work within established cost budgets., • Excellent verbal, written and visual communication skills. Self-driven desire to grow professionally, independence, strong leadership and organizational skills, ability to set and adhere to goals. High-level time management capabilities, meet multiple simultaneous deadlines, delegate tasks, conflict mitigation, client interaction and negotiations, training of staff as needed., • Public presentation capabilities, travel/driving required, occasional night meetings., • High-level of proficiency in AutoCAD and MS Office. Knowledge of Revit advantageous., • Successful project track record in the local A/E/C industry within the Capital District, Hudson Valley, Mohawk Valley and Central New York regions. Experience in interacting with various level government agencies and municipalities is a plus., • Comprehensive, competitive compensation package., • Group health insurance, dental insurance, and vision insurance plans, • Health Care & Dependent Care Flexible Spending Accounts, • Company-paid group life insurance., • Supplemental life, spousal and dependent life and AFLAC plans available., • 401k plan., • Company-paid vacation starting and sick/personal time.

Job Description Vistrada is seeking a highly motivated and experienced candidate to serve as an ETL Developer / Data Architect on our Business Intelligence ("BI") team supporting key clients. Vistrada’s clients look to us to provide technical leadership and assist them in solving many of today’s most challenging digital transformation issues and complex data analytics needs. In this role, you will help address operational challenges associated with data modeling, system architectures, data warehousing, integration, and other BI / analytics needs by applying advanced capabilities, modern technology, and best practices to real-world scenarios. This candidate must have at least 4+ years of relevant experience, as described below: Key Responsibilities: Work closely with clients on a broad range of Data / BI-oriented areas, including: • Analytics data warehouse architecture design, development, and testing., • ETL environment implementation and migration., • Report / Dashboard creation using leading visualization technology platforms (e.g., Tableau; Power BI; Qlik; OBIEE)., • Data modeling, involving both structured and unstructured data sets., • Relational data architectures., • Data integration processes., • Bachelor of Science Degree, or equivalent 4-year degree, in computer science or related information technology field, or a masters or doctorate in computer science or related information technology field., • 4+ years of related experience developing and maintaining data interchange systems, interfacing with a broad array of varying data sets, including flat files, direct database connection, and XML transactions., • 4+ years of experience with ETL tools (e.g., Informatica)., • 4+ years of experience with data modeling., • 4+ years of experience developing data analytics ETL environments to support data analytics capabilities., • 4+ years of experience coding with SQL., • Experience with leading visualization technology platforms (e.g., Tableau; Power BI; Qlik; OBIEE)., • Ability to work independently and eager to learn new technologies, techniques, processes, software languages, platforms, and systems., • Passionate, goal driven, team-oriented, and outgoing., • Flexible, self-starter, and demonstrated ability to operate effectively with ambiguous and evolving objectives in a client-facing environment., • 3 years of experience using scripting languages (e.g., Python)., • 1 year of experience with Tableau Server Administration., • 2 years of experience working with customers in data validation, troubleshooting, and business requirements definition activities., • 7 years of experience performing database development using SQL or PL/SQL., • 1 year of experience developing a data analytics ETL environment to specifically support Tableau visualizations., • 1 year of experience using ETL techniques to support a data analytics program for a government entity., • 2 satisfactorily completed statistics courses from an accredited college, or 1 year of professional experience using statistics., • Strong written communication skills. Company Background: Vistrada is a business, technology and operations services organization dedicated to helping clients plan, design, implement and manage initiatives to generate revenue, manage costs, build and sustain operations, and analyze and optimize their business. Vistrada distinguishes itself by providing seasoned expertise with a flexible team structure allowing agility and responsiveness to our client’s evolving needs. This ensures we bring the right team at the right time while optimizing the client’s investment. Powered by JazzHR KXc5aG17BD

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match!Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees.What You'll Do • Assist with field investigations, including soil sampling, site inspections, and data collection., • Support laboratory testing and interpretation of geotechnical, environmental, and geological data., • Participate in the preparation of technical reports, drawings, and documentation., • Work closely with senior staff to observe construction activities and ensure project specifications are met., • Help manage project logistics, including coordinating equipment, scheduling fieldwork, and tracking project progress., • Collaborate with a multi-disciplinary team of engineers and scientists to find practical solutions to field challenges., • Travel to various project sites as needed (including occasional overnight stays).What We’re Looking For, • We value enthusiasm, • Curiosity, and a willingness to learn, • While prior experience is a plus, we welcome candidates with 1 year of professional experience who are eager to grow in a supportive environment.Must-Haves, • Bachelor’s degree in Civil Engineering, Geotechnical Engineering, Geology, Environmental Science, or a related field., • Strong communication and teamwork skills., • A desire to work both in the field and in an office setting., • Valid U.S. driver’s license and reliable transportation., • Proficiency in Microsoft Office (Word, Excel, Outlook)., • Openness to travel, including fieldwork with variable hours and occasional weekends.Nice-to-Haves, • Internship or coursework experience related to field investigations, environmental assessments, or geotechnical studies., • Familiarity with basic field equipment (soil sampling tools, DCP testing, etc.)., • Exposure to AutoCAD, GIS software, or geotechnical data programs (e.g., gINT, GeoStudio)., • Previous involvement in student chapters of professional societies or community organizations., • Passion for renewable energy and infrastructure projects.Why ANS?, • Work on high-impact projects that shape communities and the environment., • Be part of a team that values collaboration, mentorship, and professional growth., • Gain hands-on field experience while developing technical and project management skills., • Enjoy a supportive workplace culture that encourages innovation and creative problem-solving., • Take advantage of career development opportunities, including continuing education and industry involvement.Your Growth Path, • Take on increasing project responsibilities., • Participate in training and development sessions., • Work toward professional certifications (e.g., EIT, GIT).

Job DescriptionSenior Veritas eDiscovery Platform (eDP) EngineerEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas eDiscovery Platform (eDP) Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas eDiscovery Platform (eDP) Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:Personnel assigned to this task must have the ability to adjust to changing priorities and work well under pressure. In addition, personnel may provide support along with OGC, to other FBI Divisions, such as CTD. At the Government’s discretion, available funding, and need this position will support Criminal Discovery Program. The Senior Veritas eDiscovery Platform is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed;- Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor Shall facilitate the migration of the system implementation into cloud infrastructures. - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Location: New York, NY Start date: ASAP Languages: English (required) About the Role Pragmatike is hiring on behalf of a high-growth AI cybersecurity company backed by top-tier investors and strategic AI leaders. The company is building the security layer for the AI era, protecting enterprises against AI-powered threats such as deepfakes, smishing, and synthetic voice attacks. Following a major Series B funding round led by industry-leading AI and venture partners, the company is entering a critical growth phase. Trusted by major banks, technology companies, and healthcare organizations, they are scaling rapidly to meet enterprise demand in a $200B+ market opportunity. We are looking for a Staff Machine Learning Engineer to define and build the companys ML capabilities from the ground up. ML is central to the product vision. This role is not about incremental optimization — it is about owning the strategy, infrastructure, and execution of machine learning across the organization. There is currently no dedicated ML infrastructure or ML team. You will establish the foundations: define where ML drives product value, design production systems end-to-end, and set the technical direction for how ML evolves across the company. This is a high-impact, highly autonomous role suited for someone who has built ML systems in production and is ready to architect an ML function from zero to scale. What Youll Do * Define the companys ML strategy: where ML should be applied across products, what infrastructure is required, and how to approach build vs. buy decisions. * Design and build production ML systems end-to-end — including data pipelines, model training workflows, evaluation frameworks, and inference serving. * Establish rigorous evaluation methodology to measure model quality, detect regressions, and support data-driven iteration. * Own the data strategy: determine what data is needed, how it should be labeled, how feedback loops are structured, and how models continuously improve. * Partner closely with product and backend engineers to integrate ML into customer-facing systems. * Write production-quality code within the existing codebase and contribute to architectural decisions. * Over time, help recruit, mentor, and lead the ML team as the function expands. What Were Looking For * 8+ years of experience building ML systems in production environments. * Experience standing up ML infrastructure at an early-stage startup or serving as the senior/lead ML engineer at a company. * Strong software engineering fundamentals with production experience in languages such as Python, Java, or TypeScript. * Experience with cloud-based ML infrastructure (e.g., SageMaker, Bedrock, Modal, Baseten, or similar platforms). * Hands-on experience with ML and data frameworks such as PyTorch, TensorFlow, Spark, or equivalent tools. * Comfortable working across the stack — infrastructure, backend systems, and data platforms. * Demonstrated ability to mentor engineers and elevate technical standards within a team. * High autonomy and ownership mindset, with the ability to define direction and execute without predefined playbooks. Bonus Points * Experience building ML systems for security, fraud detection, or adversarial environments. * Experience working with LLMs in production (evaluation, fine-tuning, retrieval systems, guardrails). * Background in real-time inference systems or high-throughput distributed systems. * Experience making strategic build vs. buy infrastructure decisions. * Previous startup experience in high-growth environments. Why This Role Will Pivot Your Career * Strategic AI backing: Supported by leading AI and venture investors shaping the future of AI infrastructure and cybersecurity. * Founding-level impact: Build and define the ML function from zero in a company where ML is core to product value. * Enterprise traction: Products already trusted by major banks, tech firms, and healthcare organizations. * Massive market opportunity: Positioned in a rapidly expanding AI cybersecurity space. * Leadership path: Opportunity to evolve into Head of ML as the organization scales. * Ownership & autonomy: Direct influence over architecture, infrastructure, and long-term technical direction. Benefits * Competitive salary & equity options * Health, Dental, and Vision * 401k * Hybrid flexibility Pragmatike is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all applicants without discrimination. We recruit on behalf of our clients and prohibit discrimination and harassment based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.We are committed to a fair and inclusive hiring process. We process your personal data solely for recruitment purposes, in accordance with applicable privacy laws, and maintain reasonable safeguards to protect your information. Your data may be shared with our client(s) for hiring consideration, but will not be disclosed to third parties outside of the recruitment process.

Location: Anywhere in Country At EY, we're all in to shape your future with confidence. We'll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. Join EY and help to build a better working world. ServiceNow - ServiceNow AI Architect Senior Manager ?In the digital economy, it takes more than good ideas and strong leadership to thrive. Upgrading outdated processes, systems and information is vital - but can be a risky investment in such a rapidly changing environment. That's why some of the most prestigious businesses worldwide look to us for authoritative, agile, and efficient solutions for business decision-making. As a ServiceNow Consulting Senior Manager you will play a leading role in that mission, providing the competitive edge our clients need to overcome some of the biggest creative and technical challenges around. The opportunity You will lead ServiceNow Transformation teams in a rapidly growing area of the business. It is a client facing role, in which you will have opportunities to showcase your ability to not only motivate and develop teams but also establish and maintain client relationships. You will have an opportunity to grow your consulting, technical and team leadership skills, as well as build relationships and obtain experiences that will define your career. It's a client visible role, you will spearhead EY's AI thought leadership, shaping our strategic point of view and driving innovation through the design and development of cutting-edge solutions and assets. You will collaborate closely with our clients to enable AI-driven transformation across user experience, agentic workflows, and robust AI governance frameworks. Your responsibilities will include leading the build and deployment of AI-native solutions, partnering with EY's AI & Data (AI&D) team to define and deliver comprehensive, end-to-end AI strategies that address complex business challenges and unlock new opportunities for growth. You will provide assurance to leadership by managing timelines, costs, and quality, while leading both technical and non-technical project teams in the development and implementation of technology solutions and infrastructure. Your key responsibilities As a Senior Manager, you will play a pivotal role in the effective management and delivery of complex processes, solutions, and projects. You will navigate operational and organizational dynamics while maintaining a strong focus on quality and risk management. This position offers a unique opportunity to develop your leadership skills and expand your professional network. Key responsibilities include: * Leading engagement delivery and managing client relationships on a daily basis. * Accountable for program/project management, ensuring that all objectives are met. * Developing resource plans and budgets for engagements, managing engagement economics effectively. Skills and attributes for success Here, you will serve a wide portfolio of clients - each with their own backgrounds, strengths, and ambitions, so no two days will be the same. That could mean working to transform a clients' enterprise capabilities with ServiceNow or evaluating how AI can streamline service delivery. Wherever you find yourself, you will be making a visible impact on projects that cross borders and challenge conventional wisdom to encourage transformation. To thrive in this role, you will need a blend of technical expertise and strong interpersonal skills. The following attributes will make a significant impact: * Ability to drive and support sales activities along-side EY pursuit teams demonstrating how EY's services can solve a clients business challenges - this can include but not limited to developing proposals, engagement estimates, and participating in sales presentations * Lead and develop strategies for ServiceNow enabled transformations, working with senior client executives on developing a business case, transformation roadmap, detailed plans and solution architectures * Act as an engagement manager across all aspects of a ServiceNow AI project and solution delivery including but not limited to design, configuration/development, testing and deployment phases * Ability to manage 2-3 engagements and mentor multi-disciplinary teams of 10+ resources including offshore resources (e.g., consultants, developers, and testers) * Ability to build and foster client relationships and demonstrate the value of EY services * Excellent business acumen with the ability to make fact-based decisions and resolve conflicts * Provide guidance and industry leading practice expertise for ServiceNow service management implementations across business functions (non-IT), including how specific business objectives can be met through process and technology transformation * Ability to analyze a company's service management functional capabilities people, process, and technology capabilities, provide leading practice recommendations and contribute insights to strategic roadmaps * Ability to lead client process design sessions and facilitate requirements workshops with functional and/or business process area subject matter resources * Experience in waterfall and agile delivery models - including supporting management activities such as planning, status reporting, budgets and risk and issue logs * Ability to create high quality deliverables and project artifacts * Ability to drive and support sales activities alongside EY pursuit teams, showing how EY's services address client business challenges-this includes developing proposals, engagement estimates, and participating in sales presentations. * Lead and develop strategies for ServiceNow-enabled transformations, partnering with senior client executives to create business cases, transformation roadmaps, detailed plans, and solution architectures. * Act as an engagement manager across all aspects of a ServiceNow AI project and solution delivery including but not limited to design, configuration/development, testing and deployment phases * Ability to manage 2-3 engagements and mentor multi-disciplinary teams of 10+ resources including offshore resources (e.g., consultants, developers, and testers) * Ability to build and foster client relationships and demonstrate the value of EY services * Excellent business acumen with the ability to make fact-based decisions and resolve conflicts * Provide guidance and industry-leading practice expertise for ServiceNow service management implementations across business functions (non-IT), including how specific business objectives can be met through process and technology transformation * Ability to analyze a company's service management functional capabilities-people, process, and technology-provide leading practice recommendations, and contribute insights to strategic roadmaps * Ability to lead client process design sessions and facilitate requirements workshops with functional and/or business process area subject matter resources * Expertise in ServiceNow AI capabilities, including NOW Assist, Moveworks, and AI Control Tower * Demonstrated experience designing and implementing multi-LLM architectures using various large language models * Proficiency in developing and optimizing data pipelines for AI-driven solutions * Skill in prompt engineering and Retrieval-Augmented Generation (RAG) techniques for improving AI accuracy and relevance * Advanced knowledge of multi-agent system design and agentic workflow implementation * Hands-on experience with MCP servers and Agent-to-Agent protocols for automating end-to-end AI processes To qualify for the role you must have * Bachelor's degree required (4-year degree); Master's degree preferred * Typically, no less than 5 - 7 years relevant experience in ServiceNow implementation experience and/or equivalent platform implementation experience * Typically, no less than 2 - 5 years of relevant ServiceNow NOW Assist implementation experience * Experience implementing ServiceNow's AI solutions (Now Assist, Agentic, or AI Control Tower) * Minimum of 1 of the following ServiceNow certifications: * Suite Certification - NOW Assist for ITSM * Suite Certification - NOW Assist for HRSD * Suite Certification - NOW Assist for CSM * 5 - 7 years of Big 4 or equivalent consulting experience preferably at the Senior Manager or Director level * Excellent consulting and interpersonal skills - executive communication (written/verbal), adaptability, problem solving, teamwork, relationship building, dependability, and organization * Ability to effectively develop presentations, functional and technical roadmaps as well as present ideas and proposals to all levels of management and technical expertise * Experience with defining contextual, conceptual, and logical models that align both business and technical capabilities to explain the architecture * Experience leading teams and supervising others * A driver's license valid in the U.S (United States). * Ability to travel to meet client needs (up to 60%) Ideally, you will also have * ServiceNow Certified Master Architect (CMA) or Certified Technical Architect (CTA) * Prior experience implementing Moveworks capabilities is highly desired What we look for We are interested in intellectually curious people, with a genuine passion for finding and implementing innovative ways to nurture growth. You will also need excellent communication and negotiation skills, as well as the ability to express big ideas to senior leaders, often without technical backgrounds. If you are ready to take ownership of a team that is poised to take the industry by storm, this role is for you. What we offer you At EY, we'll develop you with future-focused skills and equip you with world-class experiences. We'll empower you in a flexible environment, and fuel you and your extraordinary talents in a diverse and inclusive culture of globally connected teams. Learn more . * We offer a comprehensive compensation and benefits package where you'll be rewarded based on your performance and recognized for the value you bring to the business. The base salary range for this job in all geographic locations in the US is $171,600 to $392,100. The base salary range for New York City Metro Area, Washington State and California (excluding Sacramento) is $205,900 to $445,700. Individual salaries within those ranges are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills and geography. In addition, our Total Rewards package includes medical and dental coverage, pension and 401(k) plans, and a wide range of paid time off options. * Join us in our team-led and leader-enabled hybrid model. Our expectation is for most people in external, client serving roles to work together in person 40-60% of the time over the course of an engagement, project or year. * Under our flexible vacation policy, you'll decide how much vacation time you need based on your own personal circumstances. You'll also be granted time off for designated EY Paid Holidays, Winter/Summer breaks, Personal/Family Care, and other leaves of absence when needed to support your physical, financial, and emotional well-being. Are you ready to shape your future with confidence? Apply today. EY accepts applications for this position on an on-going basis. For those living in California, please click here for additional information. EY focuses on high-ethical standards and integrity among its employees and expects all candidates to demonstrate these qualities. EY | Building a better working world EY is building a better working world by creating new value for clients, people, society and the planet, while building trust in capital markets. Enabled by data, AI and advanced technology, EY teams help clients shape the future with confidence and develop answers for the most pressing issues of today and tomorrow. EY teams work across a full spectrum of services in assurance, consulting, tax, strategy and transactions. Fueled by sector insights, a globally connected, multi-disciplinary network and diverse ecosystem partners, EY teams can provide services in more than 150 countries and territories. EY provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally protected basis, including arrest and conviction records, in accordance with applicable law. EY is committed to providing reasonable accommodation to qualified individuals with disabilities including veterans with disabilities. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at .

The SMX Space and Intelligence (S&I) Business Unit (BU) is on the ground floor across the future remote sensing ecosystem for all orbital regimes (LEO, MEO, HEO, and GEO). We build, integrate, and operationally support our customer's emerging space-ground systems to include real-time data processing frameworks, sensor data processing, and data visualization. We are teamed with the most passionate companies in industry, dedicated to bringing best-of-breed capabilities to address our customers most pressing needs. We have an immediate opportunity for a Redhat Openshift Engineer who is excited to apply their talents to our customer's challenging project and one who will thrive in a collaborative environment. The ideal candidate is a recognized professional with hands-on expertise and an excellent understanding of engineering processes supporting large, National Defense, Agile software development programs. Work will be performed in Colorado. Please apply to this role if you have interest in relocating to Colorado. Essential Duties & Responsibilities * Design, deploy, operate, and maintain Red Hat OpenShift Container Platform (OCP) 4.x environments * Administer and support Kubernetes clusters, including upgrades, scaling, monitoring, and troubleshooting * Implement and maintain Infrastructure as Code (IaC) solutions for repeatable and reliable platform deployments * Develop, maintain, and execute Ansible playbooks for system and platform automation * Support CI/CD pipelines enabling DevSecOps workflows (e.g., GitLab CI, Jenkins) * Integrate container platforms with underlying compute, storage, and networking infrastructure * Apply and maintain security hardening in accordance with DoD and DISA requirements * Support compliance activities, including DISA STIGs, SCAP scans, and remediation * Monitor platform health, performance, and capacity; troubleshoot and resolve issues across the stack * Collaborate with application teams to onboard, deploy, and optimize containerized workloads * Document architectures, configurations, procedures, and operational runbooks * Participate in Agile ceremonies and cross-functional technical reviews * Perform other duties as assigned Required Skills & Experience * Secret clearance * 2+ years of professional experience building and maintaining Kubernetes environments using Red Hat OpenShift Container Platform (OCP) 4.x or later * 3+ years of professional experience administering Linux systems * Strong understanding of Ansible and automation using playbooks * Strong understanding of Infrastructure as Code (IaC) concepts and tooling * Experience operating container platforms in a secure or regulated environment * Bachelor's degree in Computer Science, Engineering, Information Technology, or a related field * Strong problem-solving and communication skills Desired Skills & Experience * Strong development or operational experience with Docker, docker-compose, and Kubernetes * Experience deploying and maintaining CI/CD pipelines for DevSecOps (e.g., GitLab CI, Jenkins) * Experience developing and maintaining Ansible playbooks for automation and orchestration * Experience hardening Red Hat Enterprise Linux (RHEL) systems using DISA SCAP and STIG Viewer * Experience with VMware compute, storage, and networking * Experience with Dell servers, switches, and SAN solutions Scripting experience using Bash, Python, or Perl * Familiarity with monitoring, logging, and alerting solutions in containerized environments Application Deadline: March 30, 2026 #CJPost #LI-onsite The SMX salary determination process takes into account a number of factors, including but not limited to, geographic location, Federal Government contract labor categories, relevant prior work experience, specific skills, education and certifications. At SMX, one of our Core Values is to Invest in Our People so we offer a competitive mix of compensation, learning & development opportunities, and benefits. Some key components of our robust benefits include health insurance, paid leave, and retirement. $123,900-$206,400 USD At SMX, we are a team of technical and domain experts dedicated to enabling your mission. From priority national security initiatives for the DoD to highly assured and compliant solutions for healthcare, we understand that digital transformation is key to your future success. We share your vision for the future and strive to accelerate your impact on the world. We bring both cutting edge technology and an expansive view of what's possible to every engagement. Our delivery model and unique approaches harness our deep technical and domain knowledge, providing forward-looking insights and practical solutions to power secure mission acceleration. SMX is an Equal Opportunity employer including disabilities and veterans. Selected applicant may be subject to a background investigation and/or education verification. SMX does not sponsor a new applicant for employment authorization or immigration related support for this position (i.e. H1B, F-1 OPT, F-1 STEM OPT, F-1 CPT, J-1, TN, E-2, E-3, L-1 and O-1, or any EADs or other forms of work authorization that require immigration support from an employer).

Applicant Side - Accepting Defense Candidates looking to switch.This Jobot Job is hosted by: Scott Rundlett.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $145,000 - $200,000 per year.We are a longstanding litigation firm focused on represen

A full-service HVAC controls, building automation, and energy management contractor.This Jobot Job is hosted by: Courtney Hoogervorst.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.A full-service HVAC controls, building automation, and energy manage

This Jobot Job is hosted by: Scott Dennis.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $60,000 - $85,000 per year.We are seeking a highly motivated and detail-oriented Project Accountant to join our dynamic team in the Construction industr

About Mercor’s talent network Join our Frontend Engineer Expert Network to connect with leading AI labs and companies seeking your expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in Frontend Engineering - Creating tasks and deliverable

About Mercor’s talent network Join our Backend Engineer Expert Network to connect with leading AI labs and companies seeking your expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in Backend Engineering - Creating tasks and deliverables