Trabajos field service technician en Harrison, New YorkCrear alertas

Job DescriptionNEW YORK METRO AREA Established in 1978, Digital Media Systems, Inc. (DMS) is a recognized leader providing best-in-class audiovisual solutions to the motion picture, post-production, distribution, and broadcast fields. Position OverviewThe commercial Cinema Technician is a full-time position that directly supports our efforts to provide world-class service to our wide range of clients, including commercial and independent theater owners, private and corporate screening rooms, post-production facilities, universities, museums, and more. With a focus on cinema, you’ll work with a passionate and talented group of field technicians and installers to take commercial AV projects from concept to creation, and subsequently operate and maintain those systems, once in place. This is a permanent, full-time, benefited position. Job Responsibilities • Identify and diagnose audiovisual presentation issues and equipment failures., • Provide remote and onsite support/troubleshooting assistance and guide non-technical theater and venue staff, communicating step-by-step instructions in understandable terms., • Complete routine and emergency onsite equipment service and preventative maintenance, including but not limited to equipment installation, consumable and part replacement, deep cleaning of projection system and optics, and device firmware updates and backups., • Perform routine calibration of video/imaging and audio equipment, including but not limited to image luminance/color calibration, image geometry/focus adjustment, graphic equalization, synchronization, and SPL measurement of audio channels., • Ensure the highest industry presentation quality standards are met at high profile film premieres, screenings, and other special events., • Daily travel throughout the New York metro area and occasionally out of town/out of state.Mandatory Qualifications, • Read, interpret, diagnose and affect repair of semi complex electronic equipment, e.g. printed circuit boards, power supplies, multiplexing systems, amplifiers, etc., • Provide technical guidance and training for above to other technicians., • Printed Circuit Board (PCB) / Electronics Repair SkillsMinimum Qualifications, • 3+ years’ experience operating/servicing professional audiovisual equipment., • Comprehension of AV system schematics, signal flow, and modern audio and video formats., • Experience with AV and electrical test equipment, including but not limited to: light meters, colorimeters/spectroradiometers, oscilloscopes, real-time analyzers (RTA), SPL meters, signal generators, and multimeters., • Demonstrate modern computing skills, including experience with Windows and macOS, and competencies in word processing, spreadsheets, data entry, and research., • Experience configuring and troubleshooting basic wired and wireless networks., • Excellent verbal and written communication skills., • Ability to work diligently, calmly, and professionally, under tight run-of-show deadlines., • Valid driver’s license and reliable transportation., • Flexibility in scheduling with a willingness to work nights, weekends, and holidays (paid) depending on business needs., • Ability to engage in physical activity, including lifting (up to 50lbs), standing for long periods, walking up and down stairs, and climbing ladders/scaffolding., • Must be authorized to work in the United States.Preferred Qualifications, • Knowledge and proficiency with commercial Digital Cinema equipment, including Christie, Barco, NEC, Sony, Dolby/Doremi, GDC, QSC/USL, etc., • Experience with DSP systems, audio over IP, and other distributed audio systems such as Q-SYS/Q-LAN, AES67, Dante, etc., • Understanding of control systems, such as Q-SYS, Crestron, Extron, AMX, etc, and third-party control methods and equipment such as electrical relays/switches, contact closure, GPIO, and TCP/UDP IP control., • Experience with commercial digital signage systems and LED walls., • Ability to solder and terminate cables and connectors., • CTS and related professional certifications.We Offer, • Starting salary: $70,000-$90,000/year, commensurate with experience., • Additional compensation: annual bonus based on performance., • Benefits: Health insurance, 401K, PTO in addition to sick days and paid holidays., • 401(k), • Bonus based on performance, • Health insurance, • Opportunity for advancement, • Paid time off Digital Media Systems, Inc. is an equal opportunity employer. We value diversity and encourage applications from all qualified candidates. Only shortlisted candidates will be contacted for interviews. Join us to lead with impact and help shape the future of Digital Media Systems, Inc. About Us Digital Media Systems, Inc. is a leading provider of audio-visual solutions for the motion picture industry. We have represented the high-profile interests of Hollywood film studios, postproduction, and cinema exhibition facilities, as well as industry defining product manufacturers. Our goal is to provide superior products, technologies, support, and services to the entertainment industry in an efficient and comprehensive manor. Visit us at for more information about our company and offerings.

Job Description Job Overview As a Client Support Technician, you will have the opportunity to be an IT superhero, saving the day for our Hedge Fund and Private Equity clients when technical issues arise. As the face of our organization for your primary clients, you will spend your time responding to client issues, collaborating internally and externally to resolve issues, and providing exceptional white glove service to our clients. Your role will be pivotal in ensuring our clients' operations run smoothly, allowing them to focus on their core business objectives and succeed in their endeavors. Responsibilities (including, but not limited to the following): • Provide client support and technical issue resolution via onsite visits to client's offices and via email and phone support, • Provide on-site client support 4-5 days a week, • Client on-site visits throughout the work week, resolving assigned tickets, • Answer inbound phone support requests and triage issues to the appropriate department or technician for prompt resolution, • Support all workstations, printers and peripherals for clients, • Communicate with clients and colleagues early and often, • Record all work via time entries in our ticketing system (ConnectWise) in a timely manner, • Actively manage all tickets in your queue by ensuring all notes and statuses are up to date, • Troubleshoot client issues and document all steps up to resolution in ticketing system, • Self-manage distributed workload and actively address on-going tickets, • Establish a Primary and/or Secondary onsite relationship with your assigned clients, • Home visits to set-up or troubleshoot client equipment when necessary, • Provide analysis and input in a team environment, • Must be able to multi-task client issues when applicable, • Document technical issues and take ownership of escalating issues to the appropriate resource, • Must meet the minimum standard for personal key performance indicators and contribute to the overall success of team mandated goals, • Must be flexible regarding duties and hours of work, • Ability to lift over 25lbs. of equipment, • Fundamental knowledge of client/server, Active Directory and Operating system technologies to identify and correct issues in client computer systems, • Strong technical skills in the following areas:, • Duo Security and other two factor authentication applications, • Microsoft Exchange Administration, • Familiarity with Azure Active Directory, • Familiarity with Office 365 admin portal, • Citrix XenApp, • Publish/Manage Citrix applications, • Removing hung sessions, • Familiarity with Citrix director and Citrix studio a plus, • Troubleshoot hardware (video cards, USB & peripheral devices and drivers, etc.), • Mobile device management technologies (Intune and Xen Mobile), • Understanding of networking concepts, • VMware vSphere, • Virtual server administration:, • Disk remediation, • Increasing resources, RAM CPU, • Managing and viewing GPO's, • Troubleshooting server performance, • Configuring and managing server roles, • Install, configure & manage print queues, • Troubleshoot DNS, DHCP and TCP/IP issues, • Self-motivated, detail-oriented and organized, • Excellent communication (oral and written), collaboration, organizational, and presentation skills, • Ability to manage/troubleshoot hardware (video cards, USB & peripheral devices and drivers), • Ability to troubleshoot ActiveSync and other mobile device technologies, • Ability to work independently and efficiently to meet deadlines, • Ability to assess and prioritize work in a fast-paced environment, • HS diploma required, • Bachelor's degree a plus, • Technical certifications and training a plus, • Valid Driver's License and working Vehicle, • 3 years minimum experience in a relevant field, • GREAT ATTITUDE, team player, always willing to pitch in and take on new tasks, • Competitive compensation, • Robust benefits package: medical, dental, vision, disability, life insurance, 401k, and PTO, • Exposure to diverse array of technologies, • Part of a team of experienced technicians that aim to deliver exceptional service, • Opportunities to further technical education through certification programs, • Positive, friendly, supportive office environment 85k-95K

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Utility Technician will operate various Class A, B, and/or C vehicles (pumper truck, P&D truck, fence truck, container truck, etc.) in support of the operation's needs Responsibilities: • Conducts daily pre-shift & post-shift vehicle inspection & report deficiencies to shop immediately., • Also, report improper operation, faulty equipment, and unusual conditions to the Operations. Manager., • Operates service truck to and from pre-designated work sites based on daily routing information., • Services portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines., • Notifies management of any issues encountered on back-up route assigned., • Maintains telephone or radio contact with dispatch to receive additional instructions, changes to work locations, etc., • Maintains truck log according to state and federal regulations., • Follow all established safety rules & regulations., • Operates flat bed truck to and from pre-designated work sites based on daily routing information to deliver or pick-up portable restroom units, hand sinks, holding tanks or containers., • Updates tickets with relevant delivery or pick-up detail., • Operates fence truck to and from pre-designated work sites based on daily routing information to deliver or pick-up fence (chain link, panel, materials, etc.), • Will also act as a lead on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment., • Operates tanker/transfer truck to and from local dump and completes required paperwork as necessary., • Special projects as assigned by management. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $25.08 – $35.12 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Job Description Join a practice of ten Ophthalmologists and one Optometrist. We are a collaborative group of physicians, technicians and administrators offering an unparalleled care experience for patients with access to world-class quality eye care in the convenience of their local neighborhoods. Our service lines include: Comprehensive Ophthalmology, Glaucoma, Cataract Surgery, Corneal Disease Care, Audiology, Ophthalmic Plastic Surgery, Pediatric Ophthalmology, Retina, Botox and dermal fillers, contact lens exams and hearing aid services. Westchester County: Located in the Hudson Valley of New York, this is one of the centrally located regions within the New York metropolitan area and a great environment to work and live. Access NYC with ease while enjoying the suburban lifestyle. Experience Art and Cultural, excellent schools, trendy restaurants, the Hudson river, beaches, boating, shopping, sporting events, and diverse communities. SightMD Offers: Competitive compensation, Bonus Incentives and Growth Potential • Mentorship for newly assigned physicians, Physician Ambassador Program, • Autonomous practice, Collegial team of physicians / cross-specialty collaboration, • Equity Partnership opportunities within your first 3 years of practice, • Jumpstart your career as part of our Young Leadership Council, • Break ground in your field as part of our Clinical Research Division, • Full technician and scribe support, • Comprehensive Benefits include Health, Dental, Life, and other insurance programs, 401(k) matching, paid malpractice, • Relocation/Sign on Bonus, CME, PTO, 5 Day work week, Work/Life Balance CV Submission Please Contact: Frank Zura, M. Ed. Physician Recruitment Manager 609.833.0858 Saj Cherian Physician Recruiter 551.206.8473

Job Description Service Manager Company Miller Proctor Nickolas Inc Location [Westchester County NY. Travel across NYC Metro region] Employment type Full time About Miller Proctor Nickolas Miller Proctor Nickolas is a leading provider of commercial and industrial boiler and burner solutions serving the NYC Metro region. We are known for safety, technical excellence, and dependable service. Our values are Safety, Accountability, Integrity, and Teamwork. Summary of the role The Service Manager owns the performance of the Service Parts and Warehouse teams. The leader in this role delivers safe operations, customer satisfaction, profitable growth, and a strong culture. Success is measured by labor utilization, on time response, first visit resolution, margin on service work and parts, safety results, employee engagement, and clear communication across teams. Reports to CEO of Miller Proctor Nickolas, Inc. What you will do • Lead the Service team with clear goals, coaching, and timely feedback, • Plan the daily dispatch schedule to maximize technician utilization and customer responsiveness, • Ensure safe and high-quality startup, commissioning, and field service for new and existing systems, • Drive service contract growth and aftermarket capture in partnership with Sales, • Maintain departmental KPIs for profitability, efficiency, response time, and quality. Report monthly performance and actions, • Implement standard work for dispatch, documentation, and closeout to improve consistency and speed, • Identify training needs and arrange technical and safety training for technicians and coordinators, • Build relationships with key customers and suppliers. Ensure timely communication and resolution of issues, • Partner with Accounting on accurate billing, collections support, and period cost control, • Partner with the Safety Committee to maintain safe operations and achieve safety targets, • Recruit, retain, and develop team members. Set expectations, conduct reviews, and address performance gaps promptly What success looks like in the first year • Labor utilization at or above target with a visible schedule and zero missed commitments without escalation, • First visit resolution rate and callback rate meeting plan, • On time preventive maintenance completion across the contract base, • Documented technician training matrix with required certifications current, • Month end service and parts results that meet revenue and margin targets Qualifications • Bachelor's degree in a related field or equivalent experience preferred, • Ten or more years of field service and maintenance experience with fuel fired boiler and burner equipment, • Three or more years of team leadership or supervision in a service environment, • Strong planning and dispatch skills with attention to detail in documentation and reporting, • Proven communication skills with customers technicians and suppliers, • Demonstrated ability to mentor and develop people and to resolve conflict professionally, • Working knowledge of safety practices and OSHA expectations, • Valid driver's license with a clean driving record, • Ability to visit job sites across NYC Metro and Westchester and to work in mechanical rooms as needed Preferred • Experience with Cleaver Brooks or similar manufacturers, • Experience with service contracts parts operations or warehouse leadership, • Familiarity with CRM and service dispatch tools and with KPI management Benefits • Competitive base salary with performance incentive opportunity, • Medical dental vision and life insurance, • Retirement plan participation, • Paid time off and holidays, • Training and professional development EEO Miller Proctor Nickolas Inc is an equal opportunity employer. We consider all qualified applicants without regard to race color religion sex national origin age disability veteran status or any other protected status. We value a workplace that is safe respectful and inclusive. Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.

Job Description Shop Mechanic - Larchmont, NY This opportunity is with a company that is a Regional Leader in Load Bank Testing and Rental of Mechanical and Electrical Equipment in the Critical Facilities Environment. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Their Service Offering supports Critical Facilities / Data Centers for the Hyperscale, COLO, and Enterprise Data Center Market. A fully competent Shop Mechanical / Electrical Technician applies an intensive and diversified knowledge of complete HVAC start-up, testing and operations. Responsible for maintaining and providing emergency support on critical cooling units including but not limited to chillers, cooling towers, CRAC and CRAH units, air handler units, and other HVAC equipment onsite primarily at HQ and occasionally at customers' sites within regional area. Will be involved in preventive maintenance, emergency response, equipment start-up. Candidate will work at the company's headquarters testing equipment or rebuilding older systems. Discuss with technical support problems related to maintenance or operation of equipment. Consults with supervisor concerning unusual problems and developments. Responsibilities: • Check-in rental equipment upon return/termination of rental to ensure all equipment is returned in satisfactory condition, • Perform Preventative maintenance on rental equipment to include operations and appearance, • Maintain cable inventory to include inspection of condition/testing/repairs if needed and ensuring all cables are kept in a clean & orderly condition, • Perform testing on rental equipment to ensure that the equipment is available and ready-to-rent at all times, • Troubleshoot and repair equipment found to not be operating as intended, • Travel to customer sites to troubleshoot and repair problematic rental equipment in the field (on occasion), • Fill in and maintain test documents/reports, • Maintain shop and storage areas in a neat, clean and orderly condition, • Deliver and pick-up equipment as needed, • Assist customers as needed to ensure that rentals run as smooth as possible, • Maintain all shop equipment in good, safe working order, • Assist with shop projects which will include but are not limited to fabrication of new equipment and upgrades to existing equipment, • Load and unload rental equipment on company vehicles, customer vehicles, and 3rd party carrier vehicles, • Assist in design and fabrication but not limited to accessories, cable sets, pigtails enclosures and shipping cages, • Must be RELIABLE!!!!, • Preferably 2-6+ years' experience in Mechanical and Electrical field and ability to troubleshoot down to component level on equipment such as CRAC, CRAH, Air Handlers, Chillers, Cooling Towers, etc, • Possess general knowledge of experience working with electrical equipment a plus: UPS, batteries, PDU's / Power Distribution Units, Static Automatic Transfer Switches, Branch Circuit Monitoring, and other electrical equipment, • Must be able to understand one line drawings and schematics, • Must understand Electrical / Mechanical Theory, • Journeyman or Master HVAC License a HUGE plus, • HVAC OEM factory training or hands on experience in Trane, Liebert, Stultz, and other major HVAC brands a MUST, • Experience with Liebert DX units a HUGE plus, • CFC / EPA Universal Certification a HUGE plus, • Utilizes hand tools and test equipment to perform work, • Must be able to provide high level of quality customer service, • Requires knowledge of equipment manufacturer's specifications, • Ability to work independently and resourceful, • Knowledge of general computer hardware & software applications, • Requires excellent verbal, written communication skills & customer relation skills, • Have a high school diploma / Technical degree a plus, • Be able to fill out logs/test sheets, • Be willing to travel on occasion to job sites to perform work. After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Opportunity for advancement We offer opportunities for career growth and advancement, as well as training and certification programs to help you develop your skills. We promote from within and offer a safe and secure working environment. With a variety of projects and tasks, you'll never be bored. Responsibilities: Drive & Transport: Safely operate a 16-foot box truck to and from job sites. Power Washing & Equipment Maintenance: Perform power washing on commercial and residential properties; troubleshoot and maintain equipment (hoses, nozzles, pumps, etc.). Site Safety & Risk Mitigation: Identify and address potential hazards (e.g., chemical exposure, plant damage, furniture protection) to prevent property damage or injuries. Team Leadership: Supervise and mentor a junior technician, ensuring adherence to safety protocols and quality standards. Client Interaction: Communicate effectively with customers, address their concerns, and deliver outstanding service. Quality Control: Maintain a keen eye for detail; ensure thorough cleaning, proper rinsing of chemicals, and post-job cleanup. Qualifications: Experience: 1+ year(s) in a hands-on, labor-intensive role (construction, landscaping, janitorial, or similar). Power washing experience is a plus but not required. Leadership Skills: 1+ year(s) experience in a role supervising or training others. Drivers License: Valid license with a clean driving record; experience driving larger vehicles (e.g., box trucks) is highly desirable. Dependability: Proven track record of punctuality and consistent work ethic. Attention to Detail: Ability to spot potential issues before they become problems (e.g., chemical overspray, unprotected surfaces). Customer Service Acumen: Comfortable interacting with clients; professional, polite, and solution-oriented. Physical Requirements: Comfortable working outdoors in varying weather conditions, able to lift and maneuver heavy equipment or hoses, and stand for extended periods. Benefits and Perks: • Competitive salary and benefits package, • Opportunities for career growth and advancement, • Use of company tools, equipment, and vehicles, • Training and certification programs, • Promotion from within, • Safe and secure working environment, • Variety of projects and tasks, • Optional weekend shifts are availableJoin our team and be part of a dynamic company that values its employees and is committed to providing excellent service to our customers. Apply now and take the next step in your career as a Power Washing Field Service Manager!

Job Description Join a practice of ten Ophthalmologists and one Optometrist. We are a collaborative group of physicians, technicians and administrators offering an unparalleled care experience for patients with access to world-class quality eye care in the convenience of their local neighborhoods. Our service lines include: Comprehensive Ophthalmology, Glaucoma, Cataract Surgery, Corneal Disease Care, Audiology, Ophthalmic Plastic Surgery, Pediatric Ophthalmology, Retina, Botox and dermal fillers, contact lens exams and hearing aid services. Westchester County: Located in the Hudson Valley of New York, this is one of the centrally located regions within the New York metropolitan area and a great environment to work and live. Access NYC with ease while enjoying the suburban lifestyle. Experience Art and Cultural, excellent schools, trendy restaurants, the Hudson river, beaches, boating, shopping, sporting events, and diverse communities. SightMD Offers: Competitive compensation, Bonus Incentives and Growth Potential • Mentorship for newly assigned physicians, Physician Ambassador Program, • Autonomous practice, Collegial team of physicians / cross-specialty collaboration, • Equity Partnership opportunities within your first 3 years of practice, • Jumpstart your career as part of our Young Leadership Council, • Break ground in your field as part of our Clinical Research Division, • Full technician and scribe support, • Comprehensive Benefits include Health, Dental, Life, and other insurance programs, 401(k) matching, paid malpractice, • Relocation/Sign on Bonus, CME, PTO, 5 Day work week, Work/Life Balance CV Submission Please Contact: Frank Zura, M. Ed. Physician Recruitment Manager 609.833.0858 Saj Cherian Physician Recruiter 551.206.8473

Job Description • We are hiring immediately for full time CENTRAL STERILE TECH positions., • Location: Westchester Medical Center - 100 Woods Road, Valhalla, NY 10595 Note: online applications accepted only., • Schedule: Full time schedule. Days may vary, 7:00 am - 3:00 pm, 3:00 pm - 11:00 pm, or 11:00 pm - 7:00 am. Must be able to work every other weekend/holiday. More details upon interview., • Requirement: Required Certifications: Certified Registered Central Service Technician (CRCST)., • Pay Range: $20.00 per hour to $24.00 per hour. Make a difference in the lives of people, your community, and yourself. Join a culture of opportunity with Crothall Healthcare. Our careers are filled with purpose and empower you to transform healthcare experiences. Take a look for yourself at the Power of Clean! Crothall Healthcare is a Compass One Healthcare sector that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall is the market leader in Environmental Services (EVS), and many of the almost 1,300 accounts it serves are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work, and Best Place to Work in Pennsylvania, since 2013. Crothall has almost 30,000 dedicated team members across its core services, which include: Environmental Services, Patient Transportation, Patient Observation, Facilities Management, Healthcare Technology Solutions, Ambulatory Services, and Sterile Processing. Job Summary Summary: Carry out reprocessing tasks in Sterile Processing and Equipment Distribution, which involve decontamination, sterilization, assembly, creation of case carts, storage, and distribution of medical and surgical supplies, as well as mobile equipment, for patient care and treatment. Essential Duties and Responsibilities: • Practices efficient use of cleaning techniques, solutions preparation, equipment and tool operation., • Performs all decontamination cleaning and project assignments within area of responsibility or as directed by supervisor with high level of consistency, accuracy and reliability. This also includes executing cleanroom cleaning SOP’s., • Must wear PPE appropriately and in the appropriate area of the department., • Read and understand Manufacturer IFU in relation to the cleaning and maintenance of all small movable equipment., • Pick up soiled utility bins from soiled utility rooms and replace with clean bins to designated areas., • Pick up all bulk supplies for Central Sterile Department from Receiving Dock and deliver to storage area for proper storage., • Cleans, decontaminates, inspects, assembles, sterilizes, and transports equipment, supplies and instruments according to manufacturer’s IFU and prescribed procedures and techniques., • Decontaminates the full range of reusable patient care equipment and medical supplies, including but not limited to containers and equipment such as aspirators, croupettes, oxygen suppliers and small movable equipment using detergents and disinfecting solutions all according to manufacturer’s IFU., • Deliver daily to O.R, Clinics and Nursing Unit inventory to their assigned destination on a timely basis., • Retrieve all Sterile Processing Unit cargo trucks and soiled utility bins from nursing units on a timely basis., • Pick up on a daily basis all soiled Small Movable Equipment from soiled utility rooms on all Nursing Units and return to Central Sterile Decontamination Room for processing., • Prepares list of contents and affixes list to package or groups of packages. Uses central system for supplies being processed., • May gather used supplies for hospital facilities and/or departments and return them after sterilization. Qualifications: • Highschool Diploma/GED required, • College level courses and related experience may substitute for Associate, • Degree., • Associates Degree in Healthcare or Business related field preferred., • Minimum Work Experience:, • One year experience in the Sterile Processing Department preferred., • Training on the Job required Work Environment: • Ability to lift and move instrument sets and equipment of various weights., • Exposure to cleaning, High Level Disinfecting Chemicals and Enzymatic Detergents, • Exposure to strong chemical odors, • Extended Standing, Walking, Crouching, Bending, Sitting., • Pushing and pulling carts <50lbs • Lifting < 50lbs., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Crothall is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Crothall maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job Description Digital Home Systems is a premier luxury AV company specializing in creating exceptional experiences for our clients. We are currently seeking an experienced Alarm Technician to join our dedicated team. If you have a passion for cutting-edge technology and a keen eye for detail, we invite you to apply. Responsibilities: • Install, program, and troubleshoot high-end alarm systems., • Conduct comprehensive system evaluations to identify any issues or areas of improvement., • Troubleshoot and resolve issues with alarms and security systems, • Collaborate with clients to determine their specific security needs and provide expert recommendations., • Coordinate with the office team to ensure timely and efficient execution of installations and upgrades., • Maintain accurate documentation of all installations, repairs, and customer interactions., • Monitor inventory of service parts, • Conduct routine preventative maintenance on alarm systems, • Stay updated on the latest advancements in alarm systems technology to enhance our service offerings., • Proven experience as an Alarm Technician, preferably within a high-end residential setting., • Proficient knowledge of alarm system components, wiring, and programming., • Strong technical skills to install and configure complex alarm systems., • Attention to detail and ability to execute installations with precision and accuracy., • Excellent problem-solving skills to diagnose and resolve technical issues efficiently., • Strong communication skills, both written and verbal, to effectively interact with clients and team members., • Professional and polished demeanor, reflecting our luxury brand image., • Ability to work independently as well as collaboratively within a team., • Certification or training in alarm system installation or a related field., • Familiarity with luxury brands and products in the AV industry. About Digital Home Systems: The mission of Digital Home Systems is to delight clients with a fully-customized digital platform that meets their entertainment, computer, electronic, security, and home needs of today -- and tomorrow. We accomplish this by pairing best-in-class home technologies with painstaking attention to detail and craftsmanship in systems design, customization, installation and customer service. We serve as a trusted resource to building trade partners, including architects, interior designers, builders--as well as homeowners--on new construction and remodeling projects. We offer vision, technical expertise, and end-to-end solutions that unobtrusively blend home technology with every aspect of a client’s lifestyle and home décor. We stake our reputation on providing personalized, high-end, and easy-to-use systems that work as intelligently as our clients do. We stand by those systems with the highest level of customer support and responsiveness. This is a very exciting time to join a company that is rapidly growing! Why work at Digital Home Systems? • Competitive Salary, • Health Insurance (Dental & Vision), • (9) Paid Holidays, • Paid Time Off (PTO)

Job Description Salary: 65,000 - 70,000 / year based on experience Other Forms of Compensation: Flexible Paid Time Off, Benefits, 401K, Training Pay Grade: [[payGrade_obj]] Morrison Healthcare is a leading national food and nutrition services company exclusively dedicated to serving more than 600 hospitals and healthcare systems. Morrison's hospital kitchens, restaurants, and cafés feature socially responsible practices and exceptional guest experiences. The company's comprehensive Mindful Choices® wellness and sustainability platform includes the latest in healthful eating and an understanding of behavioral change in food consumption. Morrison's alignment with Partnership for a Healthier America's (PHA) Hospital Healthy Food Initiative positively impacts up to 41 million patients and 500 million hospital meals annually. Morrison has been named one of Modern Healthcare's "Top 100 Best Places to Work in Healthcare" for the past five years, and Training Magazine's Top 125 organizations for the past six consecutive years. The company is a division of Compass Group and has more than 1,200 registered dietitians, 300 executive chefs, and 17,000 professional food service team members. Ready to lead with purpose? Discover how our Patient Services Manager makes a difference every day—watch now! Job Summary We are seeking a Patient Services Manager to lead our Patient Services Team in an Acute Care setting in Westchester County. Key Responsibilities: • Establishes goals and oversees implementation of patient food services needs based upon medical direction and patient population, • Hires, directs, coaches, trains, and develops patient service team members, • Complies with dietary restrictions on special or modified diets to ensure optimal food preferences are met within guidelines of the diet order limitations, • Ensures patient services staff assists in achieving stated patient satisfaction goals, • Complies with regulatory standards, including federal, state, and accrediting agencies while adhering to facility confidentiality, HIPAA regulations, and patient rights policies, • Participates in/ leads patient satisfaction programs, departmental meetings, and facility wide Quality Assurance/Performance Improvement programs Qualifications: • Associate degree with one (1) year work experience in food services or related field, or bachelor’s degree in food service technology/management or related field, • Certified Dietary Manager certificate, Registered Diet Technician or Registered Dietitian, preferred, • Minimum of one (1) year experience in food service management preferred in an acute care setting, • ServSafe® certified, desirable Morrison Healthcare is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Morrison Healthcare are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Paid Parental Leave, • Holiday Time Off (varies by site/state), • Personal Leave, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Morrison Healthcare maintains a drug-free workplace. Req ID: 1431323 Morrison Healthcare AMY S MILLER [[req_classification]]

Job Description Start strong, stay strong! Join our winning team and receive our Stay and Thrive Bonus. A career that changes lives. SightMD is a rapidly growing integrated ophthalmic provider group, extending the reach of exceptional eye care to patients across New York, New Jersey, Pennsylvania, Connecticut and Massachusetts. With over 127 eye care providers and the convenience of 60 locations, our commitment to delivering unparalleled services is at the heart of everything we do. As we embark on our mission, we are actively seeking teammates who are eager to contribute to our legacy of eye excellence, a tradition that spans more than 50 years. Position Summary: As an Ophthalmic Technician, you will play a vital role as an assistant to our physicians. You will be cross trained to perform a range of administrative and clinical duties. These duties include preparing the patient to see the physician, preparing examination rooms, performing basic and routine vision screening examinations, administering eye medications, cleaning, and maintaining ophthalmic instruments and assisting physicians during minor surgical and laser procedures. Job Duties & Essential Functions: • Meet and greet patients, gather medical history, and document findings., • Perform a comprehensive range of pre-exam and advanced diagnostic tests (e.g., OCT, Fundus photography, visual field testing)., • Educate patients on medications and pre/post-operative care as directed by the physician., • Assist with contact lens fitting and care instruction., • Perform refractometry to determine refractive errors and assist with minor surgical procedures., • Maintain inventory of ophthalmic supplies and instruments., • Assist with clinical equipment upkeep and cleaning., • Adhere to all safety protocols., • Participate in continuing education to maintain best practices., • Process prescription refills with proper authorization., • High School diploma or equivalent required, • Excellent written, verbal, and listening skills, • Strong interpersonal, time management, and organizational skills, • Strong customer service skills, • Ability to work a flexible schedule, including weekends, • Ability to stand for long periods of time, • Ophthalmic Scribe Certification (OSC) required or completion within 45 days of hire, • $24.50 per hour Benefits: We aim to take care of our teammates the same way we take care of our patients. All SightMD employees receive the following benefits: • Medical/Dental/Vision Insurance, • Prescription Drug Coverage, • Company Paid Term Life Insurance & Long-Term Disability, • Supplemental Insurance Benefits, • Employee Assistance Program (EAP), • Retirement Plan - 401(k), • Paid Time Off (PTO), • Paid Holidays, • Career Development Programs, • All benefits are subject to eligibility requirements. Equal Employment Opportunity Statement: SightMD is an equal opportunity employer and does not discriminate on the basis of race, color, national origin, religion, creed, age, disability, sex, gender identity or expression, sexual orientation, familial status, pregnancy, predisposing genetic characteristics, military status, domestic violence victim status, criminal conviction, and all other protected classes under federal, state and local laws. If you are an individual with a disability and need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please contact People Services at #SMD123

Job DescriptionThe Line Service Manager is responsible for all aspects of all Line Services activities. The Line Service Manager will insure departmental compliance with appropriate rules, regulations, and policies of the Company, the Airport Authority, and all local or State agencies affecting the Airport and FBO operations. The Line Service Manager sets the tone for the overall quality of the operation and must strive to be a technical subject matter expert with regard to all areas of the operation. Headquartered in Plano, Texas, Atlantic Aviation welcomes customers at more than 100 fixed base operator (FBO) locations – from the Hawaiian Islands to Caribbean islands and all points in between throughout the US. We offer a wide range of aircraft ground handling and flight hospitality services, including fueling and line services, hangar and ramp storage, modern executive terminals for passengers and crews, and much more. We are firmly committed to diversity, equity, and inclusion throughout our network and aspire to be the employer of choice in our dynamic segment of aviation. We invest in enhancements to our safety, service, technology, and strategic infrastructure in order to provide more choices, improved experiences, and better value for customers. Atlantic Aviation intends to lead the way to a more sustainable future for business and general aviation. Atlantic Aviation is “local everywhere” - providing a safe, friendly, and familiar experience across North America. To learn more about Atlantic Aviation or to make a reservation at any of our 100+ FBOs, visit AtlanticAviation.com. Website duties and responsibilities include (but not limited to): • Maintain site practices and procedures that contribute to a safe, profitable, positive, and enjoyable work environment while applying the “Atlantic Attitude” at all times., • Supervise ramp, hangar, and fuel storage facility activities to assure safe, efficient and timely delivery of service to our customers. Communication of work progress and significant issues with the Operations Manager or General Manager., • Ensure proper staffing and delegate work assignments for all Line Service workers. Monitor and update daily aircraft arrivals and departure requirements. Ensure that timely service meets customer expectations., • Design and facilitate appropriate daily communication with Customer Service Representatives to ensure service accuracy and completeness., • Interface with customers to ensure all servicing requirements are met and that customers are satisfied with our service. Resolve customer service issues., • Understand the departmental profit and loss statement, quarterly forecasting, and annual budget processes and the effects of business decisions made for the department., • Responsible for understanding opportunities and risks of the operation and developing strategic goals and objectives to maximize operating profit for the base., • Responsible for the design and implementation of the workplace culture that strives for the highest degree of excellence in safety and environmental compliance, customer service and support standards, and employee retention and performance development., • Enforce company policy and procedures. Administer disciplinary action as directed by the Operations Manager and General Manager., • Inspect entire facility for cleanliness and proper equipment operation. Report all facility discrepancies to the Facility Supervisor., • Operate fuel trucks, tugs, baggage handling and various other pieces of equipment as needed., • Initiate incident reporting, investigation, and assist solution planning for preventing reoccurrence., • Inspect and sign off all aircraft cleaning service orders., • Monitor and maintain proper fuel inventory at the storage facility., • Daily quality assurance and accuracy of paperwork and auditing of fuel paperwork., • New employee interviewing, indoctrination and training., • Overtime staffing and approval., • Conduct Manpower analysis., • Payroll submittal and vacation approvals, maintaining vacation balances., • Any additional duties that may be specific or unique to your location assigned by Management which may include functioning as a Line Service Technician or Customer Service Representative.Required SkillsEDUCATION AND QUALIFICATIONS, • High school graduation., • 5 years of line service experience or equivalent in aviation field., • Valid state driver’s license and meet the company’s insurability requirements., • Meet Atlantic Aviation’s operations and safety training requirements., • At least 18 years of age, • Consistently demonstrated good organizational and leadership skills., • Participation in Atlantic Leadership Training., • Good communication skills, both written and oral., • Basic proficiency in Microsoft Office applications including Word, Excel and Outlook., • Excellent customer relations skills required. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk and hear. The employee is required to stand and walk. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust and focus.

Hazle Township PA, a dynamic market leader in the area of end-of-line automated packaging machinery and consumable strapping solutions, is seeking a driven Field Service Technician for the New York region.EAM-Mosca is privately held and retains a unique, focused, entrepreneurial culture.EAM-Mosca al

Are you a Field Technician/Engineer/Service Technician? Or do you want to become a member of this field? Are you tech savvy with mechanical aptitude and a good communicator? Can you help us to provide best-in-class service and work with an industry leader?. As a Field Service Technician/Customer Ser

Job Description About the Role: The Service Technician plays a crucial role in ensuring the optimal performance and reliability of HVAC systems within residential and commercial settings. This position involves diagnosing, repairing, and maintaining various HVAC equipment to provide a comfortable environment for clients. Technicians will be responsible for performing routine inspections and preventative maintenance to extend the lifespan of HVAC systems. Additionally, they will troubleshoot complex issues and implement effective solutions to minimize downtime. Ultimately, the Service Technician contributes to customer satisfaction by delivering high-quality service and ensuring that HVAC systems operate efficiently and safely. Minimum Qualifications: • High school diploma or equivalent., • Valid HVAC technician certification or relevant trade license., • Associate degree in HVAC technology or a related field., • Experience with advanced HVAC control systems., • Conduct routine maintenance and inspections on HVAC systems to ensure optimal performance., • Diagnose and repair HVAC equipment, including heating, ventilation, and air conditioning units., • Install new HVAC systems and components according to industry standards and safety regulations., • Respond to service calls and provide timely solutions to HVAC-related issues. The required skills in HVAC repairs and maintenance are essential for diagnosing and resolving issues efficiently on a daily basis. Technicians will utilize their knowledge of HVAC electrical systems to troubleshoot and repair electrical components of HVAC units. Proficiency in HVAC installation is critical for setting up new systems and ensuring they meet safety and performance standards. Skills in HVAC controls systems will enable technicians to optimize system performance and energy efficiency. Additionally, strong communication skills are necessary for interacting with clients and providing clear explanations of services performed.

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. The Role We are looking for Field Service Technicians who have experience working with Fuel Dispensers and/or Point of Sale equipment. Don't have the experience but interested in working with us, don't worry we will train!! Ideal technician must be able to complete tasks including hanging hardware (repair and/or replacement) and mechanical/electrical issues with both fuel dispensers and point of sale equipment. Must be willing to learn about other systems within the properties to assist in general maintenance needs. • Perform petroleum equipment service and installation calls in a professional, timely, and quality manner., • Complete job paperwork for each service call, at the time of service., • Complete training courses in a timely manner to maintain current certifications and equipment knowledge., • Act as a resource for customers; aid and product support to maintain long term relationships., • Juggle multiple tasks in a fast-paced ever-changing work environment., • Communicate skillfully and effectively in person or over the phone., • High School Diploma or GED, • Positive Attitude, • Attention to Detail, • Minimum of 2 years’ experience or schooling in a Mechanical, Electrical, or Computer Trades, • Proficient in Microsoft Office Suite, • Written and verbal communication skills, • Willingness to work in all varied weather conditions, • Experience with Point-of-Sale installation and repair a plus, • Experience working with Wayne or Gilbarco Dispensers is a plus, • Experience working with Verifone a plus, • Experience in computer networking a plus, • Clean driving record and the ability to work safely, • 10 Paid Holidays, • Flexible Time Off, • 401(k) Company Match, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP)

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1224B - New Rochelle, NY

Job Description Company Overview: At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters . We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation to make the communities we serve more sustainable and livable. Our mission is to offer the best combination of multi-modal sharing technology and seamless customer service, so users can unlock joy in their day! We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own solutions. Shifts: Monday to Thursday 10am to 2pm (Part-Time) Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking part-time repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hours Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1135B - White Plains, NY

Job Description We are a growing IT support and Consulting business Serving Residential and Business Customers. We provide Managed IT Services, Onsite Field Service and repair, and Preventative Maintenance Service for home users, small and medium businesses. All of our work is always client facing and most everything we do involves direct interaction with end users - in person, email or phone. The field service technician must have significant technical knowledge to be able to solve problems and communicate effectively with users of varied technical knowledge and abilities in both onsite and remote support small business and consumer environments. Duties and Responsibilities: Resolve requests in an efficient and courteous manner. Document all steps taken in troubleshooting for escalation, as necessary. Maintain strict confidentiality regarding individual and corporate information as well as corporate intellectual property. Perform hands-on and remote support at the desktop level, including installing and upgrading software, installing hardware, configuring systems and applications, and performing preventative maintenance Determine the best solution to effectively resolve the issue the first time Follow-up with users as needed to drive issue to resolution Identify and suggest possible improvements on processes and procedures Minimum Qualifications: Good knowledge of Windows operating systems, Microsoft Office 365, Chrome and Edge web browsers, and Active Directory required. Good knowledge of Mac OS and software, and iOS required. Good knowledge of PC and MAC hardware, standalone and networked. Good knowledge of WIFI troubleshooting, solutions and implementation including router setup, access points, ethernet, and mesh solutions. Good knowledge of network peripherals, especially printers for deployment and setup and troubleshooting. Good knowledge Of Setting up Hosted Voip Phones and Troubleshooting Knowledge of network wiring, installs and troubleshooting a plus. Basic knowledge of mobile device setup and use including iPhones, iPads, and Androids. Basic knowledge of IP networking Ability to diagnose and resolve basic software and hardware problems. Excellent verbal and written communications skills, including explaining technical details to end users in a n easy to understand way. Ability to work independently and with minimal supervision. Ability to use work ticketing system requiring good skills and maintaining and updating tickets. Must have reliable car and clean license, as you will be traveling to clients offices. Salary commensurate with experience. + Auto expense allowance Company DescriptionWe are a growing IT support and Consulting business Serving Residential and Business Customers. We provide Managed IT Services, Onsite Field Service and repair, and Preventative Maintenance Service for home users, small and medium businesses. All of our work is always client facing and most everything we do involves direct interaction with end users - in person, email or phone.We are a growing IT support and Consulting business Serving Residential and Business Customers. We provide Managed IT Services, Onsite Field Service and repair, and Preventative Maintenance Service for home users, small and medium businesses. All of our work is always client facing and most everything we do involves direct interaction with end users - in person, email or phone.

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Field Service Technician - Earthmoving. Milton CAT is seeking an experienced Earthmoving Field Service Technician. Three years experience as an Earthmoving Shop Technician working with heavy equipment.

Committed to being a "world class supplier," they provide solutio Field Service Technician, Service Technician, Field Service, Service Tech, Technician, Mechanical, Retail, Staffing. For over 50 years, our client has been a trusted source for metal fabricating machinery, offering services in Pennsyl

Lens - Achromatic, Fluorite, Apochromatic, Immersion, Huygens, Ramsden, Periplan, Wide-Field, Super-Field, Abbe Condenser, Achromatic Condenser, Universal Condenser, and similar lens. We use an email quality control service to maintain security and a remove and dead address filter.

Committed to being a "world class supplier," they provide solutio Field Service Technician, Service Technician, Field Service, Service Tech, Technician, Mechanical, Retail, Staffing. For over 50 years, our client has been a trusted source for metal fabricating machinery, offering services in Pennsyl

Install transformers, junction boxes, circuit breakers, service panels, switches, electrical boxes and lightning rods. Part of this time is spent in the classroom and part in the field with on-the-job instructions, including on-the-job instruction for installation and repair.

Assistant Project Manager – Bergen County, NJ.Join a growing, family-owned Developer/General Contractor based in Bergen County, NJ.My client is looking for a motivated and detail-oriented Assistant Project Manager to support our management team across a range of construction projects, including co

Giordano Industrial Services (GIS) is looking for an experienced Field Engineer to assist in multiple large scale industrial and commercial construction applications. Competent in reading drawings, specifications, and procedures to support field work in concrete construction, steel construction, mas

A Field Engineer works with Project Managers, Project Engineers, and Superintendents to safely and cost-effectively build heavy-highway construction projects in New York, New Jersey, and Connecticut. Bachelors Degree in Civil Engineering, Mechanical Engineering, Construction Management, Business Adm

Manage and grow customer relationships through excellent customer service. Bachelor's degree in Construction Management or a related field preferred but not required. Experience in the industrial electrical field is a plus.

Set up and monitor job cost budgets, field purchases, and labor tracking. Coordinate a smooth project turnover process with field staff. Bachelor’s degree in Construction Management, Engineering, Architecture, or a related field.

Strong documentation and communication skills are required to maintain the level of service expected of a Project Manager. Prior use of Field management software a bonus (i.

Bachelor's degree in Construction Management, Engineering, or related field preferred but NOT required.

Construction Project Manager Needed for Top-10 ENR Design-Build Contractor - White Plains or NYC.I'm partnered with a leading US contractor hiring for a highly-motivated Project Engineer/Manager specializing in construction & engineering to join their team based in New York.We are looking to introdu

We own and operate leading entertainment and news brands, including NBC, NBC News, MSNBC, CNBC, NBC Sports, Telemundo, NBC Local Stations, Bravo, USA Network, and Peacock, our premium ad-supported streaming service. NBCUniversal's policy is to provide equal employment opportunities to all applicants

Experience in the industrial electrical field is a plus. Exceptional customer service skills and the ability to maintain positive client relationships. Collaborate with field supervision to identify work opportunities, manage obstacles, and ensure project progress.

At Sand Cherry Associates, we excel in the design and delivery of strategic customer-centric initiatives through digitally native, data-empowered solutions.Our client's confidence in us is centered on exceptionally skilled, high-energy talent working with the support of the full Sand Cherry team.Fin

We have a strong in-house group of field technicians that services top U.

This Project Manager will lead strategic mobile initiatives for our top telecom client, managing the full project lifecycle from planning through execution.The role is heavily focused on driving key milestones, maintaining scope, budget, and timelines, and ensuring effective communication across sta

We have a strong in-house group of field technicians that services top U. Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits.

Giordano Industrial Services (GIS) is looking for an experienced Field Engineer to assist in multiple large scale industrial and commercial construction applications. Current work scope includes civil/structural site improvements, mechanical process/automation field support, as well as renovations t

Bachelors Degree in Civil Engineering, Mechanical Engineering, Construction Management, Business Administration or related field. A Field Engineer works with Project Managers, Project Engineers, and Superintendents to safely and cost-effectively build heavy-highway construction projects in New York,

Required Skills: Project Manager - infra/cloud 8+ year experience.

Staffing Industry Analysts for our accelerated growth of 300% in the last 3 years with over 5500+ employees globally, with over 30+ locations in the US and global operations in 32 countries.We believe in providing staffing solutions to address the current talent gap Right Talent Right Time Right Pla

Manage the operations of nurse training at new and existing studios to ensure Rowan opens with as many piercing services as possible and continues to provide quality service to all customers. Constantly look for areas of improvement, structure, and standardization across field and corporate projects

Assistant Project Manager Bergen County, NJ.Join a growing, family-owned Developer/General Contractor based in Bergen County, NJ.My client is looking for a motivated and detail-oriented Assistant Project Manager to support our management team across a range of construction projects, including comme

We have a strong in-house group of field technicians that services top U. Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits.