Trabajos genetic engineering en Tampa, FloridaCrear alertas

A Snapshot of Your Day Will be working in the liner manufacturing production according to daily production requirements. Technicians are responsible for the condition and status of all liner inventory ready for molding. Role requires releasing all produced liners ready for molding in accordance with work instructions for each specific part number. Monitors all equipment systems according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. How You'll Make an Impact \n • Checking the daily schedule for parts specifically the number of liners to be produced and liner parts in process. \n, • Ensuring the correct practice is pulled up on production system screen creating liners according to engineering specifications and quality standards. \n, • Monitoring and maintaining good documentation practices and adjusting machines, setting controls, and performing troubleshooting as required by engineering and quality criteria. \n, • Ensures all equipment calibration is current and documented. \n, • Perform basic or specifically defined maintenance operations; cooperates with maintenance technicians and/or external service providers in repair issues. Continuously improve safety, productivity and raw material waste while organizing material inventory and storage. \n, • High school diploma or general education degree (GED) required. \n, • Knowledge of or interest in industrial machinery and ability to perform basic math functions using the metric system. \n, • Ability to read Engineering instructions and mechanical aptitude to learn blue light equipment software. \n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. \n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. \n\n About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities \n, • Supportive work culture! \n, • Great Company-paid Health and wellness benefits \n, • Paid Time Off and paid holidays! \n, • 401K savings plan with company match \n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

A Snapshot of Your Day Will be working in the liner manufacturing production according to daily production requirements. Technicians are responsible for the condition and status of all liner inventory ready for molding. Role requires releasing all produced liners ready for molding in accordance with work instructions for each specific part number. Monitors all equipment systems according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. How You'll Make an Impact \n • Checking the daily schedule for parts specifically the number of liners to be produced and liner parts in process. \n, • Ensuring the correct practice is pulled up on production system screen creating liners according to engineering specifications and quality standards. \n, • Monitoring and maintaining good documentation practices and adjusting machines, setting controls, and performing troubleshooting as required by engineering and quality criteria. \n, • Ensures all equipment calibration is current and documented. \n, • Perform basic or specifically defined maintenance operations; cooperates with maintenance technicians and/or external service providers in repair issues. Continuously improve safety, productivity and raw material waste while organizing material inventory and storage. \n, • High school diploma or general education degree (GED) required. \n, • Knowledge of or interest in industrial machinery and ability to perform basic math functions using the metric system. \n, • Ability to read Engineering instructions and mechanical aptitude to learn blue light equipment software. \n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. \n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. \n\n About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities \n, • Supportive work culture! \n, • Great Company-paid Health and wellness benefits \n, • Paid Time Off and paid holidays! \n, • 401K savings plan with company match \n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

A Snapshot of Your Day Will be testing wax patterns to ensure dimensional acceptance for mold processing. Participating in training and cross training in production areas. Inspecting and producing parts of exceptional quality in the Gibsonton Florida Location. How You'll Make an Impact \n • Dimensionally testing Wax patterns with ultrasonic testing equipment.\n, • Marking and engraving patterns to ensure proper identification and traceability.\n, • Record defects to identify where improvements can be made.\n, • Following written work instructions, updating and completing paperwork.\n, • Maintaining tools, equipment and work area clean.\n, • Evidence of High school diploma or general education degree (GED) required.\n, • Ability to perform basic math functions using the metric system, good attention to detail and eye/hand coordination skills.\n, • Ability to read Engineering instructions and learn ultrasonic testing equipment software.\n, • Ability to communicate effectively as position requires permanent communication with engineering and constant review of work instructions to ensure quality.\n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.\n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.\n\nAbout the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities\n, • Supportive work culture!\n, • Great Company-paid Health and wellness benefits\n, • Paid Time Off and paid holidays!\n, • 401K savings plan with company match\n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

A Snapshot of Your Day Will be working with slurry mixing and blending operations according to daily production requirements. Also, will review all slurry production and batch records, release slurries for molding usage, and monitor all equipment systems to produce parts of exceptional quality in the Gibsonton Florida location. How You'll Make an Impact \n • Trained and signed off on Demonstrated Skills Check List for Mercury, Slurry Technician and V-Blend Technician operations. Will complete Loto training and will be certified on motorized lift and forklifts in the building. \n, • Will check the daily schedule for the number of bulk batches, weigh and measure all components, performing audits and basic housekeeping throughout shift. \n, • Monitor and maintain good documentation practices. \n, • Adjust machines, set controls, and perform troubleshooting as required by operational and quality criteria. Request work orders for any equipment not operating to standard. \n, • Organizes and uses blending, slurry machine related tools, scales, pallet jacks, manipulators, hand tools, wrenches, allen wrenches, and screwdrivers. \n, • High school graduate or GED. \n, • Ability to read Engineering instructions. \n, • Demonstrated mechanical aptitude. \n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. \n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. \n\n About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines, and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities \n, • Supportive work culture! \n, • Great company-paid Health and wellness benefits \n, • Paid Time Off and paid holidays \n, • 401K savings plan with company match! \n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description Work Arrangement This is an onsite position with up to 10% CONUS/OCONUS travel. Job Overview The Explosive Handler supports explosive and energetic material operations in a DoD compliant aerospace environment. This role is responsible for the safe receipt, storage, transport, assembly, and processing of energetic materials, munitions, and explosive components used in production of munitions for fielded loitering munitions DoD systems. The Explosive Handler ensures all actions adhere to DoD explosives safety standards (e.g., DoDM 4145.26, DESR 6055.09, AFMAN 91-201) and supports operational explosive requirements across engineering, logistics, and production teams. Essential Functions • Explosive Material Handling, • Conduct safe handling, movement, preparation, and accountability of explosives, propellants, pyrotechnics, and associated energetic devices., • Able to obtain HazMat CDL certification in support of explosive transport operations., • Perform receiving, unpacking, inventory verification, and segregation of energetic materials in accordance with DoD and company standards., • Assemble and integrate secondary explosive components into aerospace subsystems under detailed technical procedures, work instructions, and engineering drawings., • Assist EOD personnel in conducting assembly of explosive components in support of program requirements., • Safety, Compliance, and Documentation, • Follow all requirements in DESR 6055.09, DoDM 4145.26, and service-specific explosives safety instructions., • Maintain strict adherence to QD criteria, hazard classifications, compatibility groups, and approved site plans., • Support explosive safety inspections, and audits., • Maintain logs, hazard sheets, lot traceability, inventory tracking, and documentation for all explosive movements and operations., • Facility & Equipment, • Maintain magazines, designated storage locations, and explosive operating facilities in audit-ready condition., • Operate logistic equipment such as forklifts, pallet jacks, and approved explosive transport vehicles., • Conduct daily, weekly, and monthly explosive facility inspections., • Perform other duties as required. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Strong understanding of explosive safe handling, compatibility groups, and hazard classifications., • Ability to read and follow technical data packages, and engineering work instructions., • Must meet physical requirements for lifting, PPE, and working within explosive safety environments., • Knowledge of energetic system integration processes. Education / Certifications • High school diploma or GED; technical school or military training preferred., • Certification in explosive handling (NAVSEA, USAF, or Army equivalent)., • Forklift certification and hazmat training. Experience • 10+ years of experience handling explosives, munitions, or energetic materials OR military MOS such as 89B, 2311, AO/GM, 2W0., • Prior experience supporting DoD ammunitions storage points (ASPs) Munition Storage Area (MSA)., • Prior experience supporting aerospace or unmanned systems. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to stand for extended periods of time Frequently required repetitive movements of wrists, hands, and/or fingers Constantly required to lift up to 50 pounds Constantly experience a high level of noise, adverse weather or temperature conditions Frequently required to operate motor vehicle • Work performed in explosive operating facilities, magazines, and production environments., • Exposure to energetic materials, loud noise, heavy equipment, and outdoor range conditions., • Requires use of PPE including FR clothing, hard hats, hearing protection, eye protection, and grounding straps. Security Clearance • Current Secret clearance preferred, with the ability to upgrade to Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

A Snapshot of Your Day Will be loading and unloading furnaces with crucibles containing cores. As well as unpacking the cores from the crucibles and completing required testing for the cores in the Gibsonton Florida location. How You'll Make an Impact \n • Operating electric and gas kilns.\n, • Loading and unloading ovens using both forklift and other lifting devices.\n, • Filling out kiln load maps to track where in the kilns the cores are located and inspecting the cores for any potential defects.\n, • Recording collected data from testing into the correct location.\n, • Cleaning, maintaining the unpack and kiln room and equipment for organization and safety.\n, • Evidence of a completed High school diploma or general education degree (GED) is required.\n, • Knowledge of or interest in industrial machinery, able to perform basic math functions using metric system and to read Engineering instructions.\n, • Demonstrated mechanical aptitude.\n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.\n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.\n\nAbout the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities\n, • Supportive work culture!\n, • Great Company-paid Health and wellness benefits\n, • Paid Time Off and paid holidays!\n, • 401K savings plan with company match\n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

A Snapshot of Your Day Will be working in the liner manufacturing production according to daily production requirements. Technicians are responsible for the condition and status of all liner inventory ready for molding. Role requires releasing all produced liners ready for molding in accordance with work instructions for each specific part number. Monitors all equipment systems according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. How You'll Make an Impact \n • Checking the daily schedule for parts specifically the number of liners to be produced and liner parts in process. \n, • Ensuring the correct practice is pulled up on production system screen creating liners according to engineering specifications and quality standards. \n, • Monitoring and maintaining good documentation practices and adjusting machines, setting controls, and performing troubleshooting as required by engineering and quality criteria. \n, • Ensures all equipment calibration is current and documented. \n, • Perform basic or specifically defined maintenance operations; cooperates with maintenance technicians and/or external service providers in repair issues. Continuously improve safety, productivity and raw material waste while organizing material inventory and storage. \n, • High school diploma or general education degree (GED) required. \n, • Knowledge of or interest in industrial machinery and ability to perform basic math functions using the metric system. \n, • Ability to read Engineering instructions and mechanical aptitude to learn blue light equipment software. \n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. \n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. \n\n About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards \n • Career growth and development opportunities \n, • Supportive work culture! \n, • Great Company-paid Health and wellness benefits \n, • Paid Time Off and paid holidays! \n, • 401K savings plan with company match \n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

A Snapshot of Your Day You will be part of the manufacturing process that will result in the production of quality castings in the Gibsonton Florida location. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines, and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. How You'll Make an Impact \n • Will work in the Core Department with X-Ray Equipment using process knowledge, basic engineering principles, previous experience, and creativity, to help develop and improve manufacturing processes that result in the production of quality castings.\n, • Reading and understanding engineering procedures to ensure adherence and compliance with approved processes.\n, • Participating in plant initiatives to support the reduction of scrap and overall casting costs.\n, • Performing metal rework required to eliminate typical defects observed on the casting surface.\n, • Completing the required manufacturing documentation in Mercury.\n, • A high school diploma or general education degree (GED) is required.\n, • Previous related manufacturing X-Ray or quality and visual inspection experience is a plus.\n, • Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.\n, • This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.\n\nAbout the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards \n • Career growth and development opportunities\n, • Supportive work culture!\n, • Great Company-paid Health and wellness benefits\n, • Paid Time Off and paid holidays!\n, • 401K savings plan with company match\n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description McAdams is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina, South Carolina, Texas, and Florida. We seek to partner with our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring experiences to the forefront of everything we do, and to do that takes special people. Position Overview The Crew Chief I is responsible for the overall execution of daily assigned project tasks. This position supervises survey crew employees, ensuring all work is completed efficiently and successfully, all while following established McAdams's guidelines for field work delivery. Key Responsibilities • Knowledgeable of the various disciplines of construction staking / surveying and accurately and effectively perform required tasks during a project, • Ensures field crew daily tasks are performed accurately and efficiently through the various project stages following McAdams's guidelines and company standards, • Read and interpret construction plans that include storm drainage, sewer tables, check pipe slopes/grades, contour interpolation, straight grading, and compute vertical curves for profile grade checks, • Identify potential plan, computation, and constructability issues, • Demonstrate an ability to perform Boundary, Topographic, ALTA and other various types of surveys with limited or no instruction, • Plan projects to be performed in the most efficient and accurate way possible and seeing the big picture for project execution, • Proactively communicates with group management regarding project status and/or issues, • Assist with maintenance of vehicles, equipment, and work sites, • Responsible for assessing potential hazards and unsafe working conditions, • Aids in maintaining a safe and respectful work environment by following company policies and procedures, • Follow guidelines and company standards set forth for the Geomatics department, • Act as the company representative in the field during client interactions, • Communicates respectfully with clients and / or project neighbors to insure a positive company image, • Executes JHA's, participates with pre and post job briefs, • Provides clear and concise direction to fellow crew members and ensure crew members perform daily tasks, • Defuse contentious situations that may arise from interaction with client or project neighbors, • Assist with maintenance of vehicles, equipment, and work sites, • Mentors and trains Junior Crew Chief members, • Prepares field notes that meet the McAdams standards and manages field data files in a manner that they can be easily interpreted and cyphered by office support staff, • High school diploma or GED, • Demonstrate core competencies of the Instrument Operator Level II, • Knowledge of TDS Software, Trimble Robotics, GPS equipment, Carlson Software, and Leica Robotics, • Punctual and dependable Hardworking and detail-oriented, • Successful completion of a functional assessment, • Must have a valid driver's license, • The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions., • Work will primarily be outside with varying environmental conditions., • Work will involve long-term standing and frequent walking as well as include common hazards encountered while maneuvering through project sites., • Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally., • Must be able to stand up or walk between 8-12 hours a day. If you need assistance with our online application system process, please contact the Human Resources Team at 919.361.5000 or . Please read these notices for important information regarding applying for work with McAdams. • Know Your Rights: Workplace Discrimination is Illegal, • E-Verify (English/Spanish), • Right to Work (English/Spanish)

Job Description Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. Under the direction of the Plant Manager, and Maintenance Manager, provide maintenance support for both mechanical and electrical equipment ensuring the plant operates at the highest level of uptime and efficiency. Perform all maintenance functions within company defined Environmental, Health and Safety guidelines and sustain a clean and organized maintenance department. Key Responsibilities • Adhere to all OSHA safety requirements as it relates to the duties of maintenance operations., • Complete all required OSHA or corporate training courses as defined by management before conducting tasks., • Wear proper PPE as required for the task at hand., • Under the direction of the Maintenance Manager, perform preventative and corrective maintenance activities., • Install or repair pumps, motors, conveyors, filler lines, plant equipment or other devices required to maintain production uptime., • Typical equipment includes, but not limited to: 1) process pumps and mixing equipment, 2) pneumatic components and control systems, 3) hydraulic components and control systems, 4) power transmission systems (gearboxes, chains, drives, etc), 4) relay logic, 5) field instrumentation, 6) PLC/DCS troubleshooting., • Troubleshoot equipment issues and provide supervisor or management a repair solution including parts list and timeline., • Perform basic electrical tasks such as wring motors, VFD’s control panels or other low and high voltage equipment., • Maintain maintenance shop in a clean, organized, professional condition, following all safety requirements for hazardous materials., • Keep all tools, power equipment, and other tools of the trade in a clean and safe working condition., • Ensure all documentation for LOTO, Confined Space, Hot Work and other related safety documents are completed before performing any work ., • Maintain effective and positive communication with production staff., • Keep supervisors and management aware of pending issues and status of installation or repair., • Coordinate preventative maintenance tasks on key plant equipment and ensure completion of those tasks., • Strive to meet safety targets or objectives set by the supervisor or management. Experience and Skills Requirements • A minimum of 5 years performing mechanical duties in a manufacturing or similar environment., • Highly experienced background installing/repairing air pumps, PD Pumps, pneumatic valves, gearboxes., • Ability to install and wire 100 hp electric motors, limit switches, photoelectric sensors, VFD’s., • Exhibit a strong problem-solving aptitude when it comes to mechanical equipment., • Operate Forklift, Man Lift, Scissor Lift, or other similar equipment., • Order parts, check paperwork on receipt of parts., • Attend safety meetings, conduct safety audits., • Safely perform all other duties as required by supervisor on an as needed basis., • Computer skills., • Welding certifications plus strong pipe fitting and electrical skills., • Able to read technical documents., • Experience with preventative maintenance programs., • Background working with asphalt related products or equipment., • Advanced education or training in engineering, mechanics or technical related fields., • Understanding of boiler and or hot oil systems., • Maintain effective and positive communication utilizing reading, writing, and documentation creation in English for manufacturing staff, Computerized Maintenance Management System (CMMS), and outside/inside support services. Working Conditions • Must have 20/20 or corrected 20/20 vision., • Strong communication skills., • Employee must have full range of motion to stand, walk, sit, reach, climb, stoop or kneel., • Employee must be able to stand for extended periods., • Employee must be able to complete repetitive strenuous work under varying climate conditions., • Employee must be able to safely lift up to 70 Lbs., • Must be able to work at heights in excess of 40 feet without concern., • Must be able to work in a plant environment with varying levels of temperature and physical requirements. ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Powered by JazzHR 0PJ4tpMPpQ

Job DescriptionAbout DST DST is a federal and commercial enterprise technology integrator specializing in secure, scalable IT solutions for complex environments. We support Fortune 500 clients, federal agencies, and major healthcare systems with modern infrastructure, cybersecurity, cloud, and data management solutions. As we expand our healthcare footprint across the Florida West Coast, we are seeking an experienced, relationship-driven Senior Outside Sales Account Executive to lead growth across regional hospital systems. Position Overview DST is looking for a seasoned healthcare sales professional with deep relationships across hospital systems on Floridas West Coast. The ideal candidate has sold high-value, enterprise-grade IT or technology solutions into hospitals and health networks and has established credibility with CIOs, IT leadership, construction/facilities teams, purchasing, and supply chain departments. You must bring a proven track record of successfully navigating complex sales cycles, working within group purchasing structures, presenting technical solutions, and driving multi-million-dollar opportunities from identification to close. Responsibilities • Own and grow DSTs hospital system accounts across the Florida West Coast region., • Build and maintain strong relationships with IT, construction/facilities, purchasing, supply chain, and capital planning teams., • Identify opportunities for DSTs large-scale IT offerings, including infrastructure modernization, cybersecurity, cloud, networking, and hardware solutions., • Manage long-cycle enterprise sales opportunities, including RFP/RFI responses, proposal development, pricing strategy, and executive presentations., • Work cross-functionally with DST delivery and engineering teams to ensure solution alignment and customer satisfaction., • Represent DST at industry events, hospital association meetings, and relevant networking forums., • Maintain accurate CRM documentation and forecasting.Required Qualifications, • 5+ years of outside sales experience selling into hospital systems or large medical groups., • Prior experience with a medical supply, medical device, or healthcare IT solutions company., • Demonstrated success selling enterprise-scale, high-value IT solutions (infrastructure, networking, cybersecurity, cloud, or similar)., • Existing relationships with key stakeholders across the Florida West Coast hospital ecosystem strongly preferred., • Strong understanding of hospital procurement processes, budgeting cycles, capital approvals, and compliance requirements., • Ability to navigate complex organizations, influence decision-makers, and close large, strategic deals., • Excellent communication, presentation, and contract negotiation skills.Preferred Qualifications, • Experience working with GPOs (Vizient, Premier, HPG, etc.)., • Familiarity with construction planning and technology build-outs for hospital expansions or new facilities., • Strong understanding of HIPAA, PHI handling, and hospital IT governance practices.What We Offer, • Competitive base salary + uncapped commission structure, • Health, dental, and vision benefits, • 401(k), • Mileage/travel reimbursement, • Career advancement within a fast-growing integratorPhysical Requirements, • Moderate lifting/carrying up to 25lbs.; heavier weights with assistance, • Sitting & standing for long periods of time, • Repetitive motions and/or prolonged computer use, • Working at a fast pace, subject to many interruptions, physical/mental demands This is a remote position.

Job DescriptionA Tampa‑based electrical engineering and lighting design firm This Jobot Job is hosted by: Gene Choi Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $140,000 - $170,000 per year A bit about us: Our client is a well-established and growing MEP engineering firm located in Tampa, FL and their services include electrical engineering, lighting design, mechanical engineering, low voltage systems, renewable energy and commissioning. They have completed hundreds of projects for all types of buildings and facilities. Why join us? • Competitive Base Salary!, • 401K, PTO, and excellent benefits!, • Accelerated Career Growth! Job Details • 10+ years’ experience, • Ability to perform detailed punch-list constituting construction observation reports, • Experience in reviewing submittals and responding to RFIs, • Ability to review work of others, • Performs Heat Gain calculations using Trane Trace, HAP and/or Elite load calculation software and can teach others, • Sizes and selects HVAC equipment, • Completes psychrometric analysis of dehumidification process, • Able to size and layout Mechanical equipment rooms, • Identifies chase requirements, • Proficient in air balancing analysis, • Proficient with HVAC equipment layouts, • Sizes and lays out HVAC ducts and can teach others, • Proficient with domestic water service and distribution piping, • Proficient at sizing sanitary waste and vent piping, • Knowledge of AutoCAD and/or Revit, • Ability to meet tight deadlines, • Strong oral and written communication skills, • Ability to work independently as well as supervisor others to produce desired results, • Background in mechanical utilities (chilled water, compressed air, natural gas, plumbing, fire protection, HVAC, kitchen systems, areas of public assembly), • Must be abreast of latest trends in mechanical engineering, ASRAE, Florida Energy Code, and NFPA, • Knowledge of IAQ is a plus, • Bachelor’s degree in Mechanical Engineering, • PE registration required Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description McAdams is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina, South Carolina, Texas, and Florida. We seek to partner with our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring experiences to the forefront of everything we do, and to do that takes special people. McAdams Internship Program About Us At McAdams, we believe in building more than just projects—we build people, relationships, and communities. Our culture is rooted in collaboration, mentorship, and innovation. As an intern, you'll gain hands-on experience, grow your skills, and see how your work directly impacts the success of real-world projects. Our Culture We thrive on teamwork, curiosity, and a drive to do great work together. At McAdams, you'll find an environment that encourages questions, values new perspectives, and celebrates growth. We invest in our interns by pairing you with mentors, providing opportunities to network with professionals across departments, and giving you real responsibility on meaningful projects. What You'll Do • Collaborate with experienced team members on active projects., • Participate in brainstorming sessions and team meetings to contribute ideas., • Gain exposure to tools, processes, and industry best practices., • Shadow mentors and leaders to understand how projects are managed from start to finish., • Current enrollment in a degree program related to Civil Engineering., • Strong communication and organizational skills., • Ability to work collaboratively in a team environment., • Gain practical experience that builds your resume., • Work in a supportive, growth-minded culture., • Build connections with professionals who want to see you succeed. If you need assistance with our online application system process, please contact the Human Resources Team at 919.361.5000 or . Please read these notices for important information regarding applying for work with McAdams. • Know Your Rights: Workplace Discrimination is Illegal, • E-Verify (English/Spanish), • Right to Work (English/Spanish)

Job Description Job Overview AEVEX Aerospace is looking for a skilled RC pilot to perform flight operations, testing, training, demonstrations, and maintenance in CONUS and OCONUS environments depending on customer requirements. This skilled chief test pilot will have proven experience operating Group 3+ VTOL, jet turbine aircraft, fixed wing, and rotary unmanned aircraft systems in military flight test and operational environments. Expert in manual Radio Control flight operations—including takeoff, landing, and emergency recovery—ensuring safe and precise control of UAS platforms for high-risk operations. Adept at supporting developmental testing, working collaboratively with flight test teams, excellent hand eye coordination, and responding swiftly under pressure. Essential Functions • Operate as External Pilot for electric-hybrid VTOL, fixed wing, gas, turbine UAS platforms exceeding 350 lbs in both test and operational missions., • Coordinate closely with engineering and systems teams to define test requirements and provide feedback on UAS performance., • Manually control aircraft via radio transmitter during launch, recovery, and emergency procedures., • Coordinate seamlessly with Internal Pilots, Mission Commanders, and GCS Operators for safe and effective mission execution., • Contribute to pre-flight briefings, post-flight debriefings, and overall flight test planning., • Contribute to Test Readiness Reviews to discuss hazards, risks, and procedures for safe flight operations on experimental high-risk tests., • Ensure flight operations adhere to airworthiness, risk mitigation, and test safety standards., • Assist in the development of test cards, flight procedures, and enhancements to flight control systems., • Observe, document, and help resolve flight anomalies and system irregularities., • Adhere to stringent safety protocols, mission SOPs, and applicable airspace regulations., • Deploy to both CONUS and OCONUS test sites in support of dynamic and high-priority mission requirements., • Mentor and train new UAS pilots to enhance team capability and mission readiness., • Log performance data and flight notes to support engineering analysis and continuous improvement., • Lead pilot to perform training and pilot proficiency check out of new personnel and existing External Pilots., • Conduct pre-flight planning, mission briefs, and post-flight debriefs., • Oversee flight readiness and aircrew training for assigned UAS systems., • Maintain and update test pilot logs, technical flight data, and reports., • Participate in accident/incident investigations and flight safety reviews., • Represent the company in customer and regulatory flight demonstrations as needed., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Strong working knowledge of FAA, DoD, and/or ICAO UAS flight regulations., • Familiar with military UAS operations and FAA regulatory frameworks., • Knowledge of airspace coordination, range safety, and risk management practices., • Strong attention to detail and a commitment to safety., • Ability to maintain a Class II flight physical., • Proficient in manual control of multi-rotor, fixed-wing, hybrid VTOL aircraft, including gas, electric, and turbine platforms., • Ability to fly complex systems with landing gear, high wing loading, high speeds, and in challenging environments., • Strong understanding of UAS flight control systems, aerodynamics, and recovery operations., • Excellent hand-eye coordination and spatial awareness., • Ability to display flight competency through simulation and live aircraft operation., • Proficiency in UAS mission planning software and flight control systems., • Familiar with Mission Planner and ArduPilot flight controllers, including associated hardware and software., • Familiar with tuning and operating 2-stroke gas engines and turbines, including performing maintenance., • Ability to train and sign off on incoming External Pilots and assist with maintaining proficiency in AEVEX emergency procedures., • Ability to work with Government Flight Representatives and customers in the capacity of lead pilot., • Capable of operating in austere field environments while maintaining VLOS and situational awareness., • Able to work in field environments and travel as needed for test campaigns., • Ability to work independently and as part of a team in dynamic and challenging environments., • High School Diploma/GED required, Bachelor's Degree preferred., • FAA Class II Medical (or ability to obtain), • FAA Part 107 Remote Pilot Certificate required (or military equivalent)., • Part-61 preferred, • Turbine Waiver, • 6-8 years of relative experience and knowledge of basic UAS flight systems and operations, large scale work on developmental UAS preferred., • Experience in relation to education level:, • 5 years of related experience (HS/GED), • 3 years of related experience (Bachelors), • 2 years of related experience (Masters), • 10+ years Radio Controlled flight experience with complex models up to 55 lbs., • Experience with test documentation, technical report writing, and flight data analysis., • Experience with software tools for flight planning, data analysis, and mission management is a plus., • Professional experience briefing both internal and external customers., • Professional experience with the U.S. Department of State, U.S. Department of Defense, or other Government contracting agencies., • Minimum of 500 hrs flight experience Radio Control and UAS Systems. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to stand for extended periods of time, • Frequently required to view objects up close and distant range with hand eye coordination, • Occasionally experience a high level of noise, adverse weather or temperature conditions, • Field and hangar/test range environments, • May involve occasional travel and extended deployments, • Ability to obtain/maintain a Secret DoD clearance, Top Secret preferred. AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description McAdams is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina, South Carolina, Texas, and Florida. We seek to partner with our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring experiences to the forefront of everything we do, and to do that takes special people. Position Overview A Designer III (DIII) plays a key role in leading and coordinating design efforts within a collaborative team environment to produce high-quality, accurate plans under tight deadlines. As the lead designer on most projects, the DIII oversees and executes the full spectrum of design tasks necessary for successful project delivery, from permitting through construction. They are skilled at delegating tasks and engaging additional team members to support project goals effectively. Additionally, the DIII is encouraged to mentor and train newer staff, providing guidance through one-on-one sessions and group training to foster professional development and strengthen team capabilities. Key Responsibilities • Lead the preparation of preliminary design plans including site plans, utility plans and grading plans for initial project feasibility analysis by clients and setting up the base design of the project for the inclusion of others in future design phases, • Uphold McAdams' CAD and design standards to ensure consistency and quality in plan production, • Set up comprehensive sheet packages for construction drawing plan sets, accurately incorporate internal and external redlines, and maintain precise documentation, • Compile detailed plan sheets, including standard notes, construction sequences, and relevant technical specifications to support project completeness, • Collaborate on conceptual designs and develop detailed site layout plans using due diligence documents to guide design accuracy and regulatory compliance, • Contribute to the development of both preliminary and final utility layouts, focusing on efficient water distribution and sanitary sewer infrastructure, • Assist in the creation of preliminary and final grading plans, generate 3D surface models, and conduct thorough earthwork volume analysis to ensure cost-effective project execution, • Utilize Civil 3D software proficiently to create and modify complex alignments, profiles, surfaces, and comprehensive pipe network designs, • Support storm drainage system planning and sediment/erosion control design efforts to align with environmental and project-specific requirements, • Act as a liaison by effectively communicating and coordinating tasks with various internal project teams to foster integrated project delivery, • Coordinate with regulatory review agencies to quickly and efficiently address comments following a review cycle., • Work collaboratively with the project team, following company standards from initial concept design through construction administration to achieve successful project outcomes., • Play an active role in maintaining the project schedule by understanding the time required to complete design tasks, • Actively participate in team discussions, share insights, and contribute to a collaborative work environment that enhances the overall McAdams experience and promotes professional growth across departments, • Provide guidance and mentorship to new team members, facilitating their integration into the McAdams team, • Four-year bachelor's degree from an accredited program in Civil Engineering, Environmental Engineering, Biological and Agricultural Engineering, Civil Engineering Technology, or related field required, • 2 - 5 years of experience in civil engineering or related field required, • Experience with AutoCAD Civil 3D preferred, • EI on path to PE preferred, • Strong attention to detail, effective communication skills, ability to work collaboratively, and willingness to learn, • Demonstrated ability to think critically and contribute to creative solutions for design challenges, • The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions., • Work will primarily be in an office setting with limited opportunities to be exposed to adverse environmental conditions., • Work will be primarily working with fingers by picking, pinching, typing, and grasping often with repetitive motion., • Must have visual acuity for viewing a computer screen, the ability to talk, hear and sit for extended periods of time., • Must be able to carry, lift and push/pull up to 5 pounds frequently and up to 30 pounds occasionally., • Additional physical duties may be required as necessary. McAdams is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard for race, color, religion, gender (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran's status, or any other legally protected status. If you need assistance with our online application system process, please contact the Human Resources Team at 919.361.5000 or . Please read these notices for important information regarding applying for work with McAdams. • Know Your Rights: Workplace Discrimination is Illegal, • E-Verify (English/Spanish), • Right to Work (English/Spanish)

Job DescriptionDescription: Who We Are Cloud Capital is a global investment management firm founded by Hossein Fateh, the Founder and CEO of CloudHQ LLC and Co-founder and former CEO of DuPont Fabros Technology (DFT). The firm was established to identify, manage, and capitalize on acquisitions of high-quality data centers across the globe. Led by a team of highly experienced investment professionals and supported by CloudHQ, Cloud Capital will acquire, manage, develop and operate data centers to become the long-term owner and operator of choice for tenants globally. What You Get to Do Lead Day-to-day Asset Management Initiatives: Proactively manage execution of asset management strategies, supporting senior leadership, including the CIO and Investment Management senior leadership • Development Project Oversight: Manage and report on data center development and capital improvement projects, ensuring timelines, budgets, and technical specifications are met., • Technical Oversight of Data Centers: Leverage strong engineering and technical skills to understand data center operational needs, • Performance Analysis: Collect, analyze, and review property management reports, including KPIs relevant to both technical performance and financial strategy. Identify and address potential investment risks and opportunities, • Asset Improvement: Drive improvements in asset management systems and processes, incorporating technological advancements and best practices in data center operations, • Issue Resolution: Effectively identify asset performance issues, escalate to senior leadership as needed, and collaboratively determine actionable solutions, • Tenant and Stakeholder Relationships: Build and maintain strong relationships with tenants, property managers, leasing brokers, and development managers. Act as the key liaison to ensure alignment between tenant needs and data center capabilities, • Leasing and Property Management: Oversee leasing activities, property management, facility upgrades, and construction management. Collaborate with brokers to fill vacancies and negotiate lease renewals, • Investment Support: Assist and provide input to the Investment Management team with business plans, quarterly reports, and budgets for acquisitions and during the hold period, • ESG Strategy: Develop and implement asset management ESG (Environmental, Social, and Governance) initiatives tailored to data center operations Requirements: What You Bring to The Role • Education: Bachelor’s Degree in Engineering, Business, Finance, or a related field from an accredited university. A Master’s Degree in Finance, Real Estate, or Engineering is preferred, • Experience: 10+ years of relevant experience in real estate investment management, with a minimum of 5 years in data center asset management. Demonstrated experience in overseeing technical development projects and managing real estate assets is required, • Technical Expertise: Deep understanding of data center infrastructure, engineering systems (e.g., power, cooling, and networking), and operational requirements, • Project Management: Proven ability to manage complex development and capital improvement projects, ensuring on-time and on-budget delivery, • Real Estate Expertise: Solid understanding of real estate fundamentals, including leasing, valuations, and property management, • Strategic and Analytical Mindset: Ability to identify risks and opportunities and develop actionable strategies to maximize investment value, • Financial Proficiency: Strong financial understanding with proficiency in Microsoft Excel and other financial modeling tools, • Communication Skills: Excellent verbal and written communication skills, with the ability to present complex technical and financial concepts to diverse stakeholders, • Proactive and Organized: Highly detail-oriented and organized, with the ability to prioritize tasks effectively in a fast-paced environment, • Collaborative Approach: Strong interpersonal skills with the ability to work effectively within multidisciplinary teams and foster positive relationships with internal and external partners, • Travel Requirements: Willingness to travel frequently to assets, both domestic and international, as required Our Ideal Candidate Will Also Possess • Commitment to continuous improvement and staying updated on industry trends, especially within the data center sector., • Entrepreneurial mindset with a focus on delivering high returns and long-term value for the fund. What We Offer CloudHQ’s people and culture are the most enriching aspects that make us a great place to work. We are strengthened by industry experts who bring extensive knowledge, skill, and experience; leaders who bring vision, innovation and commitment to our people; and an expanding team of individuals who believe in that vision, and bring their best to support their customers and team. Our employees enjoy competitive compensation and rewarding incentives, comprehensive benefits (medical, dental, vision, life insurance, disability), 401(k) with match, 12 paid holidays, generous PTO, development opportunities, and the ability to closely impact and contribute to the growth of an exceptional organization. Equal Employment Opportunity CloudHQ is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, age, national origin, disability, sexual orientation, gender identity or expression, marital status, genetic information, protected veteran status, or other legally protected status.

Job Description Barbaricum is a rapidly growing government contractor providing leading-edge support to federal customers, with a particular focus on Defense and National Security mission sets. We leverage more than 17 years of support to stakeholders across the federal government, with established and growing capabilities across Intelligence, Analytics, Engineering, Mission Support, and Communications disciplines. Founded in 2008, our mission is to transform the way our customers approach constantly changing and complex problem sets by bringing to bear the latest in technology and the highest caliber of talent. Headquartered in Washington, DC's historic Dupont Circle neighborhood, Barbaricum also has a corporate presence in Tampa, FL, Bedford, IN, and Dayton, OH, with team members across the United States and around the world. As a leader in our space, we partner with firms in the private sector, academic institutions, and industry associations with a goal of continually building our expertise and capabilities for the benefit of our employees and the customers we support. Through all of this, we have built a vibrant corporate culture diverse in expertise and perspectives with a focus on collaboration and innovation. Our teams are at the frontier of the Nation's most complex and rewarding challenges. Join our team. Barbaricum seeks an ICAM Integration Engineer. This position offers the opportunity to be a hands-on technical leader within a complex, multi-vendor Identity, Credential, and Access Management (ICAM) ecosystem. The selected candidate will design, implement, and maintain integrations across diverse platforms to ensure cohesive, secure operations. This role is critical to enabling a Zero Trust architecture by automating deployments, integrating platforms, and streamlining data flows across identity, governance, and privileged access solutions. Responsibilities: • Develop, test, and maintain Ansible playbooks to automate deployment and configuration of ICAM infrastructure across Windows and Linux (RHEL) environments., • Apply Infrastructure-as-Code (IaC) principles to ensure secure, consistent, and repeatable deployments., • Configure and maintain Active Directory (AD) and Red Hat Identity Management (IdM) trusts to enable unified authentication., • Implement and troubleshoot federation scenarios using Ping Federate, integrating with ADFS, SAML, OIDC, and mission partner environments., • Manage data synchronization and virtualization layers to deliver a unified Master User Record (MUR)., • Build and maintain API-driven integrations across SailPoint (IGA), Delinea (PAM), and One Identity Active Roles (ARS)., • Script workflows to connect SailPoint access requests with Delinea for Just-in-Time (JIT) privileged access., • Configure SailPoint connectors for account provisioning and de-provisioning in AD, Microsoft Entra ID, and other systems., • Experience scripting with PowerShell and/or Python for automation and systems integration., • Hands-on experience with Red Hat Ansible for configuration management., • Strong understanding of identity federation protocols (SAML, OIDC, WS-Federation) and directory services (LDAP, Kerberos)., • Proficiency with REST API integration for enterprise systems., • Familiarity with both Windows Server and Red Hat Enterprise Linux (RHEL)., • Experience with enterprise IGA, PAM, and IdP platforms (e.g., SailPoint, Delinea, Ping Federate)., • Knowledge of Active Directory and Microsoft Entra ID administration., • Experience configuring Red Hat IdM and establishing AD trusts., • Relevant scripting or API integration certifications. EEO Commitment All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law.

Job Description Work Arrangement Onsite, up to 25% CONUS and OCONUS travel Job Overview The Sr Project Engineer will be expected to lead internal execution of Engineering Project deliverables for Unmanned Aerial System with a strong sense of ownership and a focus on driving outcomes. Essential Functions • Ability to develop and manage engineering project plans in support of Program Requirements:, • Provide inputs to Business Development in support of new business opportunities, • Review contractual deliverables and build plan to define NRE scope, • Coordinate with Engineering team leads to determine detailed project execution plans aligned to contractual and technical objectives, to include tasking and sequencing and resource allocation projections, • Inform Program Management development of Integrated Master Schedule, • Support active management of project timelines and deliverables using common tools, such as JIRA, Microsoft Project and Teams, • Provide program/project briefings and status updates to internal leadership and customer stakeholders • Execute Technical Authority as delegated by the Chief Engineer, to include:, • Review and Approval Engineering Change Requests through the Program Change Control Board, • Review and Approval of internal design artifacts to support all aspects of product for the full life cycle development and sustainment from concept to retirement of assigned UAS platform. • Chair IPT meetings to align cross-discipline progress and resolve blockers, • Lead the development and presentation of standard phase gate Design Reviews (SRR, PDR, CDR, FDR) in accordance with company policies • Ability to lead structured (8D) problem solving to determine Root Cause and develop/implement robust Corrective Action • Perform other duties as assigned. Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Deep expertise in ISO 9001 and AS9100 standards with demonstrated application in complex design, production, and manufacturing environments; capable of driving compliance, certification readiness, and continuous improvement initiatives. • Exceptional communication skills, both verbal and written, with proven ability to interpret, author, and present technical documentation, requirements, and procedures clearly and persuasively across all organizational levels. • Advanced proficiency in Microsoft Office and related business productivity tools, with ability to develop and present data-driven reports, metrics, and executive summaries., • Demonstrated strength in analytical thinking and structured problem-solving, including root cause analysis, risk assessment, and corrective/preventive action implementation., • High degree of initiative, accountability, and execution discipline, consistently driving projects to successful completion and achieving organizational goals under minimal supervision., • Collaborative leadership mindset, committed to cross-functional teamwork, shared success, and fostering a culture of trust, respect, and performance excellence., • Delegate authority effectively while maintaining accountability. Education / Certifications • Bachelor of Science in any of the following fields: Aerospace, Mechanical, Electrical, or Systems Engineering or equivalent combination of education, training, and experience • Master's Degree in Engineering preferred, • Project Management Professional (PMP) preferred Experience • 10 years of relevant experience leading teams in the development of aircraft, unmanned systems, and/or other complex electro-mechanical systems., • Experience in developing and tailoring System Engineering processes based on program cost, schedule, and risk tolerance, • Experience in developing requirements traceability verification matrix (RVTM) and supporting the verification analysis and testing., • Experience in the following areas preferred:, • Model Based Systems Engineering (MBSE), • Flight testing, • RC Aircraft or UAS, • JIRA task management, • Demonstrated experience using System Engineering tools to document and manage project requirements Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment Occasionally required to stand for extended periods of time Security Clearance • Current Secret Government Security Clearance required, U.S. Citizenship required., • Ability to obtain a Top-Secret Government Security Clearance required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Senior Electrical Engineer/Designer Location is onsite in Tampa, FL. This is not a remote or hybrid position. PD Power Systems LLC is seeking a Senior Electrical Engineer/Designer responsible for designing electrical and control systems for electrical power generation and distribution systems and equipment. The candidate will work closely with Mechanical Designers and Engineers in integrating controls into the electrical systems. The candidate must be familiar with electrical power generation, distribution, and various control systems to include PLCs, generator digital controls, and human machine interfaces. Experience with 2D CAD is required, experience with 3D CAD is desirable. The position requires close teamwork with other employees in engineering as well as support, both within the company and with subcontractors. Roles and Responsibilities • Prepare, edit and maintain electrical schematics, panel diagrams, cable assembles, and wiring drawings using AutoCAD software., • Create, maintain and troubleshoot PLC systems., • Be able to source components based upon customer requirements and specifications., • Education: 4-year Electrical Engineering degree with 10+ years of hands-on experience. OR, • Experience designing electrical control systems and power generation and distribution systems., • To include prototype builds, production builds, schematic designs, and troubleshooting and diagnosing system issues., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Experience with electrical power from low voltage AC (120/208V) through medium voltage (15kV)., • Understanding electrical design techniques, circuit protections, and principals involved in development of electrical drawings for Technical Data Packages (TDP)., • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Job Overview The Project Analyst will play a critical role in supporting project planning, execution, and monitoring activities across various initiatives. Responsibilities will include data analysis, reporting, process improvement, and collaboration with team members to ensure projects remain on track. The analyst will contribute to the efficient delivery of project objectives by providing insights and administrative support. Essential Functions • Conduct data analysis to support project performance tracking and decision-making processes using key metrics and reporting tools, • Collaborate with program managers to gather, validate and analyze data to ensure data accuracy and usability., • Prepare and maintain project documentation, including charters, plans, timelines, status reports, reporting dashboards, and deliverables., • Collaborate with program managers and team members to identify challenges and risks, provide analysis and management recommendations., • Develop and analyze key performance indicators (KPIs) to monitor project health and success., • Assist in budget tracking, cost analysis, and resource allocation planning to help ensure projects remain within financial parameters., • Maintain and update project management tools and systems, • Generate detailed project reports, dashboards, and presentations for stakeholders., • Research best practices, recommend process improvements, and support the development of processes and tools to enhance project efficiency., • Facilitate and participate in post-project evaluations and recommend improvements for future initiatives., • Ensure that all project documentation is stored and organized according to PMO standards, • Perform additional duties as required to support the success of project initiatives., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Proficient in Microsoft Excel (e.g., dynamic arrays, PowerPivot) and project management tools (e.g., MS Project, Jira), as well as the Microsoft Office Suite (Word, Excel, PowerPoint), • Strong analytical and problem-solving skills with a focus on interpreting data and providing actionable insights., • Effective verbal and written communication, alongside strong interpersonal and collaboration skills., • Detail-oriented with a commitment to accuracy, data integrity, and confidentiality, • Ability to manage multiple tasks and priorities effectively in a fast-paced environment., • Self-starter with strong problem-solving skills; able to work independently with minimal oversight., • Collaborative team player with strong interpersonal skills., • Bachelor's degree in business administration, Data Analytics, or a related field (preferred)., • 2+ or more years of experience in project analysis, data analysis, or project management. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment, • Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required. AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Job Overview This is a Flight Test Engineer (FTE) position for UAS development testing and designing of Unmanned Aircraft Systems (UAS), aviation electronic systems, and loitering munitions. The ideal candidate has experience with UAS flight test and project execution and implementing management procedures and controls. This person will provide advisory support and recommend project execution focus areas. This position requires teamwork, patience, a firm understanding of test and evaluation, safety and technical reviews and approvals, and the ability to travel to testing sites. Essential Functions • Perform all facets of flight testing, from initial planning through execution, data collection, reduction and analysis, report writing and recommendations to ensure on-time completion, • Provide project officer leadership required to plan and execute developmental, operational and research test or operate as project engineer or flight test engineer as required, • Provide a strict flight test disciplined approach to every aspect of flight test planning, execution, and deployed operations, • Provide advisory assistance to facilitate problem-solving and provide recommendations to ensure all flight tests are accomplished and are on time, • Interface with the various test organizations to support technical and safety plan approvals, communicate program office priorities and work daily scheduling issues, • Interface with the prime contractor and subcontractors to support the prioritization and scheduling of test item modifications, maintenance and flight test requirements, • Review and identify potential issues relating to modification packages for air vehicles, ground control stations, and other support equipment, • Assess and/or evaluate both subjective and objective data acquired through test execution, • Assist the Government in planning/executing system configurations and troubleshoot those configurations to support required sorties, • Facilitate the scheduling of unique test resources (e.g., range, weapons, etc.) and flight test activities, • Review proposals for validity and identify potential discrepancies relating to flight test requirements, • Support the program and the other PMs by providing test advice, recommending priorities, performing resource planning, and identifying constraints, and recommending inputs into deficiency identification and correction actions, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Strong understanding of new concepts quickly and apply them accurately throughout an evolving environment, • Excellent communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals, • Strong ability to professionally represent the organization as a prime technical contact, • Bachelors or Masters Engineering degree required, • 8 + years of experience in engineering, • At least four (4) of which in the DoD (preferred), • Must possess test and evaluation experience in an aerospace program with knowledge, experience, and recognized ability to be considered an aviation test engineering expert, • Experience with UAS flight test preferred The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Constantly required to sit, and to reach to use computers and other office equipment, • Constantly required repetitive movements of wrists, hands, and/or fingers, • Frequently required to stand for extended periods of time, • Frequently required to lift up to 10 pounds, • Frequently required to lift up to 15 pounds, • Occasionally experience a high level of noise, adverse weather or temperature conditions, • Frequently required to reach overhead and frequently reach at/below shoulder level, • Occasionally experience a high level of noise, adverse weather or temperature conditions, • Occasionally required to operate hand tools, equipment, heavy machinery Security Clearance AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionDescription: This position is contingent upon successful contract award. Prevailance is seeking a highly skilled Senior Marine Air-Ground Task Force (MAGTF) Logistics/Plans Analyst to provide strategic and operational logistics planning support across combatant command and component-level operations. This role requires deep understanding of logistics processes, sustainment planning, inter-service coordination, and the Joint Staff Adaptive Planning and Execution (APEX) process. The ideal candidate brings extensive experience integrating supply, engineering, medical services, maintenance, transportation, and operational contract support considerations into comprehensive operational and contingency plans. Responsibilities include, but not limited to: • Provide expert logistics planning and analysis across strategic and operational levels in support of combatant command and component-level requirements, • Apply extensive knowledge of operational planning, concept planning, bi-lateral and multi-lateral planning, and exercise planning, • Integrate logistics considerations across supply, sustainment, medical services, engineering, facilities, maintenance, munitions, contract support, and transportation functions, • Support planning efforts aligned with the Joint Staff APEX process, • Provide logistics planning and advisory support to Marine Corps organizations operating within the CENTCOM area of responsibility, • Support planning for Special Access Programs (SAP), SCI-level plans, theater campaign plans, posture plans, and synchronization efforts, • Track and report on operational-level planning efforts at the Top Secret level, including contingency plans across the Middle East region, • Coordinate logistics support requirements with service components including AFCENT, ARCENT, NAVCENT, and SOCCENT, • Develop recommendations for logistics policy, sustainment concepts, and commodity distribution strategies, • Participate in crisis action teams (CAT) and Operational Planning Teams (OPTs) as required, • Assist staff and subordinate elements in achieving logistics training and exercise objectives, • Support development and refinement of SOPs, execution checklists, orders, directives, and training materials, • 8–10 years of experience in strategic and operational logistics planning within a Geographic Combatant Command environment, • Demonstrated expertise in operational, concept, bilateral, multilateral, and exercise planning across logistics functions, • Strong understanding of the Joint Staff APEX process, • Experience integrating logistics functions such as supply, sustainment, medical, engineering, facilities, maintenance, munitions, transportation, and contract support, • Senior-level planning experience in joint and combined operational environments, • Deep understanding of APEX, CONOPS development, and inter-service coordination, • Proficient across logistics planning domains including supply, medical, engineering, transportation, and contract support, • Ability to shape logistics doctrine, policies, and sustainment strategies, • Skilled in developing SOPs and integrating operational lessons learned, • Master’s degree (MA/MS) Prevailance, Inc. proudly supports veterans as a member of the V3 (Virginia Values Veterans) program and the Hire Vets initiative. Recognized as a Top Workplace in 2025, Prevailance fosters a supportive, mission-driven environment for its team members. We provide a comprehensive benefits package to eligible employees, designed to support health, wellness, and financial security. Our benefits include: • Medical Insurance, • TriCare Supplemental, • Dental Insurance, • Vision Insurance, • Life & Accidental Death & Dismemberment (AD&D) Coverage, • 401(k) Plan with Company Matching Contributions, • Paid Time Off (PTO), • 11 Paid Holidays, • Education Reimbursement Program

Job DescriptionAbout COURSER COURSER accelerates the growth of IT service provider companies. We forge dynamic partnerships, leveraging our values of Teamwork, Service, Growth-Mindedness, Trust, and Innovation to deliver impactful solutions and phenomenal customer experiences. If you thrive in a fast-paced IT environment, join our rapidly expanding team and contribute to our ongoing success. Builds Engineer I The Builds Engineer I is responsible for designing, configuring, and deploying IT environments for clients, including setting up new workstations, laptops, servers, networking solutions, virtual machines, and cloud-based infrastructure. This role involves building custom environments based on client needs, automating deployments, and ensuring solutions are optimized for performance, scalability, and security. The Builds Engineer I works closely with technical and project management teams to deliver robust infrastructure solutions and contributes to the Company’s service offerings by providing high-quality, reliable build processes. Key Responsibilities: • Configure and deploy laptops, workstations, servers, network equipment, virtual machines, and cloud-based resources to meet client specifications., • Design and build custom IT environments tailored to client requirements, ensuring adherence to industry best practices., • Set up and configure systems for scalability, performance, and security, leveraging virtualization and cloud technologies where applicable., • Develop and implement automation scripts and workflows to streamline the build process, improve efficiency, and reduce manual effort., • Use configuration management tools (e.g., Immybot, Ansible, Puppet, or Terraform) to automate deployments and maintain consistency across environments., • Regularly review and optimize scripts and automation processes to ensure they align with changing technologies and client needs., • Conduct thorough testing of new builds, including performance benchmarking, security checks, and functionality tests., • Ensure that all deployments meet quality standards, and work closely with QA and support teams to identify and resolve any issues before client handover., • Document test results and communicate findings to internal teams to support continuous improvement., • Document build configurations, processes, and system architectures to ensure clarity and consistency for ongoing maintenance., • Maintain an internal knowledge base of build standards, troubleshooting steps, and best practices for use by the broader technical team., • Provide technical guidance and documentation to clients on build processes, usage instructions, and system maintenance tips., • Work closely with project managers, account managers, and client representatives to understand project requirements and client goals., • Participate in client discussions to provide insights on technical feasibility, deployment timelines, and resource needs., • Offer post-deployment support and troubleshoot issues related to newly deployed environments., • Propose and implement improvements to build processes, infrastructure design, and automation to enhance service delivery and efficiency., • Ensure that all builds comply with relevant security standards, client policies, and regulatory requirements., • Implement security best practices in system configuration, including network segmentation, firewalls, access controls, and data encryption., • Conduct regular audits of build processes to ensure they meet compliance standards and proactively address any vulnerabilities.Qualifications:, • Bachelor’s degree in Information Technology, Computer Science, or a related field (or equivalent experience)., • 1+ years of experience in infrastructure deployment, systems engineering, or build engineering within an MSP or IT services environment., • Proficiency with virtualization technologies (VMware, Hyper-V) and cloud platforms (AWS, Azure, Google Cloud)., • Experience with scripting languages (e.g., Python, PowerShell) and automation tools (e.g., Ansible, Puppet, Terraform)., • Solid understanding of networking fundamentals, storage, and security best practices., • Familiarity with containerization (Docker, Kubernetes) is a plus.Key Skills and Competencies:, • Technical Proficiency: Strong expertise in IT infrastructure, virtualization, and cloud technologies; ability to design and deploy robust environments., • Automation Skills: Proficiency with scripting and configuration management tools to automate and streamline deployments., • Problem-Solving: Strong analytical and troubleshooting skills to resolve issues with builds and deployments efficiently., • Attention to Detail: Ensures accuracy and thoroughness in building configurations, testing, and documentation., • Communication: Ability to communicate technical information clearly to clients and internal teams., • Collaboration: Team player with a proactive approach to working with technical, project, and client teams.Why you’ll love working here At COURSER, we prioritize the personal and professional development of our employees. We offer best-in-class training, mentorship, and clear self-promotion paths to help you grow. We foster a culture of innovation and encourage challenging the status quo. With teams located across the country, we leverage a wealth of knowledge and a collaborative spirit, eager to share and grow together. Benefit Highlights · Competitive benefits package, including medical, dental, vision, and life insurance · 401k match · Unlimited vacation time* · Paid sick time · 10 Holidays including your Birthday and a Floating Holiday! · Healthy Lifestyle reimbursement · Amazon Prime reimbursement · 40 Hours for Volunteer Time · Paid parental leave · Reimbursement for ongoing education and certifications · Learning and development programs • Unlimited vacation time after completing one full year of employment. For the first year of employment, full-time team members are provided 10 vacation days. COURSER is an Equal Opportunity Employer. We support diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, gender, gender identity, genetic information, national origin, citizenship status, marital status, age, physical or mental disability, caregiver status, veteran status, uniformed service member status or any other category protected by applicable federal, state, or local laws. Powered by JazzHR sUbG8fVg9w

Job Description Manages full scope of work from preparation of proposal through construction. Duties include overseeing all technical aspects of airport projects, reviewing all documents for quality control and quality assurance, and coordinating engineers and sub-consultants. This position is based in AVCON's Tampa, Florida office. ESSENTIAL FUNCTIONS (may include but are not limited to): Project Management: • Responsible for design and management of airport and/or site development engineering projects including ensuring completeness and accuracy of design effort., • Responsible for the various design elements to complete a project, system, component, or system with other team members with clear and specified objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment., • Prepares complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data., • Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems., • Works on multiple projects of moderate to large size using time efficiently to stay within budget and timely delivery., • Develops proposals including bid documents, project reports, studies, and other documentation., • Attends project meetings and presents specific aspects of engineering assignments/projects., • Coordinates technical and administrative activities with other internal departments and disciplines participating in the project., • Ensures project engineering activities comply with firm and contract requirements and support overall project schedule, scope and budget., • Interprets contract specifications and resolves conflicts with contractor on such matters as interpretation of specifications, workmanship, quality of materials, and related matters., • Maintains list of project milestones and issues in-progress., • Prepares monthly project status reports and change orders., • Participates in client/contractor meetings, and resolves client, engineering and management project issues., • Assists in marketing and business development pursuits., • Attends and participates in industry forums., • Identifies potential clients., • Interacts and collaborates with clients, officials, contractors, and other project team members., • Bachelor's or Master's degree in Civil Engineering., • Minimum 7 years' experience., • Proficiency with AutoCAD., • Proficiency with AutoCAD Civil 3D., • Strong understanding of Federal/State funding and approval process., • Ability to work cooperatively and collaboratively with all levels of employees, management, and clients., • Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision., • Ability to maintain confidentiality and protect privileged client information and documents appropriately., • Valid drivers' license and maintenance of satisfactory driving record. There are supervisory responsibilities associated with this position. ENVIRONMENT Work usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS As dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand. DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER AVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge. Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position. Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality. NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job DescriptionDescription: This position is contingent upon successful contract award. Prevailance is seeking a highly experienced Senior Information Systems Architect to support the planning, engineering, implementation, and modernization of wide-area communications and satellite-based network systems. This role requires deep expertise in SATCOM architecture, RF/IF communications, commercial and tactical communications integration, and system-level engineering. The ideal candidate brings extensive experience configuring and troubleshooting multi-layer communications networks, activating and monitoring terminals, and producing detailed engineering documentation to support operational and commercial transition requirements. Responsibilities include, but not limited to: • Support planning, design, implementation, and optimization of wide-area communications networks and enterprise architecture solutions, • Provide expert-level technical support for FDMA, TDMA, UHF TACSAT, GBS, and a broad range of SATCOM networks, • Configure networks, activate and monitor remote terminals, and resolve SATCOM-related incidents involving baseband, IF, and RF layers, • Employ the Joint Integrated SATCOM Tool to submit, track, and analyze Satellite Access Requests and Gateway Access coordination, • Monitor and maintain a variety of network and transmission systems, including routers, servers, switches, microwave, and fiber-based systems, • Support engineering and commercialization efforts for deployed communication systems using COTS equipment and multi-technology network components, • Develop detailed engineering diagrams that capture system-level and operational-level views, • Execute robust engineering change management and ensure system documentation remains accurate and current, • Minimum 10 years of experience in network configuration, system monitoring, SATCOM terminal activation, and RF/IF communications troubleshooting, • Experience employing and analyzing Satellite Access and Gateway Access through the Joint Integrated SATCOM Tool, • Senior-level experience supporting complex SATCOM and network engineering environments, • Deep understanding of FDMA, TDMA, UHF TACSAT, GBS, and related satellite communications systems, • Skilled in multi-layer troubleshooting and resolving communications incidents, • Capable of producing detailed system and operational diagrams, • Experienced in engineering change management and supporting commercialization of deployed systems, • Bachelor’s degree (BA/BS), • Possesses Top Secret Clearance (SCI preferred) Prevailance, Inc. proudly supports veterans as a member of the V3 (Virginia Values Veterans) program and the Hire Vets initiative. Recognized as a Top Workplace in 2025, Prevailance fosters a supportive, mission-driven environment for its team members. We provide a comprehensive benefits package to eligible employees, designed to support health, wellness, and financial security. Our benefits include: • Medical Insurance, • TriCare Supplemental, • Dental Insurance, • Vision Insurance, • Life & Accidental Death & Dismemberment (AD&D) Coverage, • 401(k) Plan with Company Matching Contributions, • Paid Time Off (PTO), • 11 Paid Holidays, • Education Reimbursement Program

Job Description Barbaricum is a rapidly growing government contractor providing leading-edge support to federal customers, with a particular focus on Defense and National Security mission sets. We leverage more than 17 years of support to stakeholders across the federal government, with established and growing capabilities across Intelligence, Analytics, Engineering, Mission Support, and Communications disciplines. Founded in 2008, our mission is to transform the way our customers approach constantly changing and complex problem sets by bringing to bear the latest in technology and the highest caliber of talent. Headquartered in Washington, DC's historic Dupont Circle neighborhood, Barbaricum also has a corporate presence in Tampa, FL, Bedford, IN, and Dayton, OH, with team members across the United States and around the world. As a leader in our space, we partner with firms in the private sector, academic institutions, and industry associations with a goal of continually building our expertise and capabilities for the benefit of our employees and the customers we support. Through all of this, we have built a vibrant corporate culture diverse in expertise and perspectives with a focus on collaboration and innovation. Our teams are at the frontier of the Nation's most complex and rewarding challenges. Join our team. Barbaricum is seeking a highly skilled System Information Assurance and Security Engineer to support USSOCOM implementation and migration for next generation Identity, Credential, and Access Management (ICAM). This position supports engineering efforts to install, test, and implement this new framework as part of the broader Zero Trust (ZT) implementation efforts. The ICAM Engineers implement the design, integration, and governance of enterprise identity solutions that form the foundation of a Zero Trust security model. This role requires a proven track record in identity architecture, access governance, authentication technologies, and compliance with Department of Defense (DoD) cybersecurity standards. Responsibilities: • Execute engineering solutions for identity credential and access management for Zero Trust implementation across enterprise systems., • Design and maintain an enterprise-wide identity and access management strategy aligned with DoD Zero Trust principles, NIST 800-207, and DoD ICAM Reference Design., • Lead integration of federated identity, single sign-on (SSO), and multi-factor authentication (MFA) across cloud and on-prem environments., • Develop and maintain policies, standards, and reference architectures to enforce least-privilege and attribute-based access control (ABAC)., • Conduct the implementation of Privileged Access Management (PAM) and Identity Governance and Administration (IGA) solutions., • Collaborate with cybersecurity, network, and cloud teams to align ICAM solutions with Zero Trust pillars (identity, device, network, application, and data)., • Ensure compliance with DoD 8140/8570, RMF, FedRAMP, and other applicable frameworks., • Active DoD TS/SCI Clearance, • Bachelor's degree in Computer Science, Information Systems, Cybersecurity, or related field (Master's preferred)., • 10+ years of experience in enterprise identity and access management architecture, • Demonstrated expertise with Zero Trust frameworks and DoD ICAM standards., • Hands-on experience with SAML, OAuth2.0, OpenID Connect, PKI, and certificate management., • Experience with DoD enterprise solutions such as Radiant Logic, Okta, Ping Identity, SailPoint, ForgeRock, Microsoft Entra ID (Azure AD), or equivalent., • Deep knowledge of Privileged Access Management and Identity Governance & Administration solutions., • Strong understanding of DoD cybersecurity compliance frameworks (RMF, NIST SP 800-53, 800-207, 8140/8570)., • Advanced Certs (Preferred)CISSP, ISSAP, ISSEP, ISSMP, CISM, CAP, • Experience supporting DoD or Federal government environments., • Familiarity with Zero Trust Network Access (ZTNA) and continuous authentication models., • Strong communication skills with ability to brief senior leadership and interface with stakeholders. All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law.

Job Description Barbaricum is a rapidly growing government contractor providing leading-edge support to federal customers, with a particular focus on Defense and National Security mission sets. We leverage more than 17 years of support to stakeholders across the federal government, with established and growing capabilities across Intelligence, Analytics, Engineering, Mission Support, and Communications disciplines. Founded in 2008, our mission is to transform the way our customers approach constantly changing and complex problem sets by bringing to bear the latest in technology and the highest caliber of talent. Headquartered in Washington, DC's historic Dupont Circle neighborhood, Barbaricum also has a corporate presence in Tampa, FL, Bedford, IN, and Dayton, OH, with team members across the United States and around the world. As a leader in our space, we partner with firms in the private sector, academic institutions, and industry associations with a goal of continually building our expertise and capabilities for the benefit of our employees and the customers we support. Through all of this, we have built a vibrant corporate culture diverse in expertise and perspectives with a focus on collaboration and innovation. Our teams are at the frontier of the Nation's most complex and rewarding challenges. Join our team. Barbaricum is seeking a skilled Senior Full Stack Application Developer to support the ongoing development and modernization of the STRIKE Tool, a critical financial planning and execution platform used by the Department of Defense (DoD). This role is pivotal to transforming how senior leaders manage fiscal resources, increase operational transparency, and meet audit-readiness goals in support of national security objectives. The ideal candidate will combine deep technical experience with an understanding of DoD IT environments. This role offers the chance to work alongside mission-driven developers, analysts, and end users to build secure, scalable web applications tailored to real-world defense financial management needs. Responsibilities: • Design, develop, and maintain scalable and secure full stack applications that support DoD financial workflows, • Collaborate with UI/UX teams, QA engineers, and government stakeholders to define and implement tool capabilities, • Integrate and interface with existing federal financial management systems, • Develop RESTful APIs and microservices for secure, compliant data flow, • Apply secure coding practices aligned with DoD STIGs and RMF standards, • Implement and manage role-based access controls (RBAC) to support audit-compliant design, • Contribute to Agile sprint cycles, participate in code reviews, testing, and release coordination, • Active DoD TS, SCI eligibility preferred, • 7+ years of hands-on experience in full stack development, supporting web-based applications, • Front-end expertise using React, Angular, or Vue.js, • Back-end development experience with C#, Node.js, .NET Core, Java, or Python, • Familiarity with SQL and NoSQL databases (e.g., PostgreSQL), • Proven knowledge of DevSecOps practices, version control (Git), and CI/CD tools such as GitLab or Jenkins, • Experience deploying or maintaining solutions on cloud platforms like AWS, Azure, or GovCloud, • Strong understanding of secure API development and RBAC design principles, • Previous experience working in DoD or federal government environments, • Bachelor's or Master's degree in Computer Science, Information Systems, or related discipline, • Experience working with DoD budgeting processes (e.g., POM, O&M, RDT&E), • Familiarity with audit-compliant or traceable systems used for budgeting, forecasting, or contracting, • Understanding of STIG compliance, ACAS scanning, RMF documentation, and secure system hardening, • Relevant development certifications, such as:, • AWS Certified Developer or Solutions Architect, • Microsoft Certified: Azure Developer Associate, • Certified Kubernetes Application Developer (CKAD) All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law.

Job Description Job Overview A Software Engineer 2 is an experienced professional responsible for designing, developing, and maintaining software applications. This person serves as an independent contributor implementing software solutions with light supervision from more senior members of the software department. They have a strong understanding of programming languages, software development methodologies, and debugging techniques and contribute to the entire software development lifecycle, from initial design to testing and deployment. Essential Functions • Contribute during the entire software development process including requirements, design, implementation, test, debugging and deployment., • Develop Embedded Linux, Windows PC and microcontroller software applications using C, C++, and occasionally other programming languages., • Maintain computer programs using advanced software programming and/or scripting languages, techniques and standards., • Specification, design, development, maintenance, integration, documentation, debug and testing of software for Windows and embedded software applications in C and C++., • Embedded applications in custom headless devices with focus on real-time performance aspects including multi-threading, time synchronization., • Configuration, troubleshooting, data analysis, and integration of a wide variety of applications and equipment such as internal software libraries and products, GPS receivers, LiDAR sensors, Inertial sensors, network routers, radio modems, meteorological sensors, serial port hubs, etc., • Review and evaluate technological developments in hardware, software, and telecommunications for applicability to current or future requirements., • Analyze user requirements to derive software design and performance requirements., • Design, develop, deploy, configure, document and debug software, while properly escalating issues to meet deadlines., • Apply the appropriate standards, processes, procedures, and tools throughout the development lifecycle, and ensure reuse of code., • Design and code new software or modify existing software to add new features., • Troubleshoot and debug existing software and correct defects., • Integrate existing software into new or modified systems or operating environments., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Knowledge in one or multiple programming languages, such as C, C++, Python, Lua, Java, • Proficient in software development of microcontroller level embedded systems, • Knowledge of communication protocols (e.g., SPI, I2C, UART, CAN), • Prior experience developing Autopilot systems, ground control stations, or flight simulation software is highly desirable, • Analytical skills to interpret complex data sets, • Problem-solving skills to determine the cause of bugs and resolve complaints, • Ability to grow your professional skills and learn from challenges, • Possess good organization and problem-solving skills, • Knowledge of Linux, Linux programming or Embedded Linux concepts., • Experience using Git or other version control systems. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionYorktel is always seeking new talent to join our team. Therefore, we are advertising some key positions within the company where we can collect and store potential candidates. By submitting your Resume for this specific posting, you agree to have your details kept on file and to be contacted as and when open positions become available. Please ensure your Resume has your most recent experience and up to date contact details. If you do not hear from us, it is because we are not currently recruiting for this position. For over 35 years, Yorktel has been the video managed services partner around the world for some of the largest business and government agencies. With over 10,000 video systems under management worldwide – more than any other video communications service provider – Yorktel has the proven expertise and global reach to deliver enterprise-quality visual communications. Yorktel is currently seeking a Senior Field Engineer who will install, commission, and manage the technical aspects of large scale commercial networked Audio/Visual Presentation and Videoconferencing systems. This position regularly works within a project team of individuals with varying responsibilities, degrees of expertise and influence. This position reports directly to the Director of Yorkforce. The Director of Yorkforce will provide direction and support to the Sr. Field Engineer. The Sr. Field Engineer will help determine best strategy for remediation of any variation to client requirements and/or technical variables which may inhibit successful completion of any project or effort. The Director of Yorkforce will also support the Sr. Field Engineer on career development and escalation issues. Roles & Responsibilities • Communicate to stakeholders, any client, site and/or project specific issues, make recommendations to the PMO in regard to such issues and ensure agreed upon resolution of issues., • Regularly communicate answers to complex questions and respond to detailed inquiries regarding technical issues and the resolutions thereof., • Handles and is expected to protect all internal and external confidential information and must utilize discretion and judgment based on company policies and procedures., • Communicate daily technical and site specific information to the project team in a comprehensive, thorough and detailed manner., • Daily interaction with clients and job sites to document customer requirements and job site conditions., • Provide any and all post installation documentation, including red lined drawings, network information, MAC addresses, etc... back to Project Management., • Be capable of working effectively and efficiently with support from other members of the engineering team., • Maintain complete and accurate project documentation and records., • Communicate effectively with internal staff, client representatives, cooperative trades and subcontractors., • Daily oversight of subcontractors and other installation engineers., • Be responsible for successfully completing assignments on time and within budget and communicate effectively to the project team if budget and/or timeline is in jeopardy., • Conform to company technical standards and practices., • Correctly interpret multiple formats of technical specifications; schematic drawings and architectural diagrams., • Knowledge of and adherence to Yorktel policies and procedures., • Lead the installation, replacement and/or configuration of integrated system components, networked Video Conferencing Codecs, networked A/V Control Systems and networked Audio DSP Devices, • Test and commission the final installation of entire system prior to Client handover including proper installation, set-up, calibration and operation of DSP-based audiovisual components and networked AV control systems, • Daily communication with the Project Management Team of project status including immediate communication of any issues which may impact successful, timely completion of project, • Audio system calibration, including AEC and RF systems, • Display calibration for color, EDID and others., • Perform hands on Client training upon completion of project, • Ensure Customer Acceptance Form is signed and sent back to Project Management upon Client sign off of job completion, • Ensure all ‘red lined’ engineering drawings are completed and returned upon completion of project., • Provide post-installation support in transition to Yorktel tech services departments, • Knowledge of video/audio conferencing service standards., • Knowledge of audiovisual, videoconferencing and IT products and applications., • Must show professionalism, integrity and teamwork., • Exceptional customer service and problem solving skills., • Exceptional written, verbal and interpersonal skills., • 5 years of experience in Network, Audiovisual and/or video conferencing system integration., • College degree or military technical college graduate or equivalent and related work experience., • Polycom/Tandberg/Cisco certified Videoconference Engineer (TCE/CVE/etc) certification desirable, • Audio DSP (Polycom, ClearOne, BiAmp) certifications desirable, • AVIXA CTS certification with Advanced CTS-I, CompTia Network or CCNA certifications desirable, • May require occasional lifting (up to 50 lbs)., • Requires extensive sitting, standing and walking., • Domestic travel requiring multi-night stays within and at times outside the local work area., • Valid passport; International travel possible., • Valid U.S. driver’s license ., • If permissible by applicable law, may be required as a condition of employment to complete a background check and/or drug test if required by law or by current or future contracts/clients/vendors, etc. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, genetic information and testing, family and medical leave, sexual orientation and gender identity or expression, protected veteran status, or any other characteristics protected by law. We prohibit retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination

Job DescriptionWho we are.Platinum Technologies is a Northern Virginia based integrated solutions firm that specializes in Cybersecurity, Cloud and Digital Services to the Public Sector. Our team solves hard problems and helps our Mission Partners achieve their goals. If you are self-motivated, possess demonstrated learning agility, and are passionate about delivering high-quality work products – we want to hear from you. We lead with technical expertise, but that is just the tip of the iceberg – the ‘Why’ matters. At Platinum, we don’t hire people to do a job. We provide professional and leadership development to complement our self-motivated domain experts. Our teammates are dot-connecting leaders that operate in a mutually accountable environment to deliver thought leadership, expert technical analysis, and quality execution for our clients You.Platinum Technologies currently has an opportunity for an experienced Cyber Integration Engineer to ensure the successful integration and implementation of Zero Trust transformation, solve complex cross-Iplan integration challenges, develop detailed architectural artifacts, and provide targeted, expert-level engineering support to overcome technical roadblocks. We are offering a competitive sign-on bonus and relocation assistance for qualified candidates. Located at MacDill AFB in Tampa, Florida. Candidate must hold an active TS/SCI clearance. What you get to do.● Serve as the primary technical liaison between the Chief Zero Trust Architect and the 12 IPlan execution teams, ensuring alignment with the enterprise Zero Trust Reference Architecture.● Analyze and resolve complex cross-pillar integration challenges (e.g., integrating ICAM solutions with Network Segmentation policies and Data Access controls).● Develop and deliver detailed architectural and engineering artifacts, including integration patterns, Interface Control Documents (ICDs), sequence diagrams, and technical specifications.● Provide "surgical augmentation" to IPlan execution teams to overcome implementation roadblocks, troubleshoot complex issues, and accelerate delivery.● Ensure that Systems Security Engineering (SSE) principles (NIST 800-160) are applied throughout the system development lifecycle across all IPlans.● Validate integration feasibility and design patterns across diverse environments, including multi-cloud (AWS, Azure), hybrid, on-premises, and specialized SOF environments (Tactical Edge and Disconnected, Intermittent, and Limited (DIL) bandwidth operations).● Support the Chief Architect in conducting Architecture Review Boards (ARBs), technical deep dives, and solution validations.● Contribute to the development of Analysis of Alternatives (AoA) and decision support materials.● Identify and mitigate technical risks related to system integration, interoperability, and dependencies.● Evaluate proposed engineering solutions to determine the adequacy of the security design and ensure consistency with ZT principles.● Develop and document integration test plans and procedures to validate the interoperability and security of the ZT architecture.● Support the development of detailed transition plans for moving capabilities from the EDAT innovation phase to EOM sustainment. Required Skills.•BA/BS and minimum 12 years of progressive experience in IT/Cybersecurity with at least 5 years focused on systems engineering, security engineering, or technical integration of complex enterprise systems within the DOD>•Active TS/SCI Clearance.•Must possess an active DoD 8570 IASAE Level II certification (e.g., CASP+ CE, CISSP, CSSLP). •Technical certifications in relevant domains such as Cloud (AWS/Azure Specialty), Networking (CCNP/JNCIP), or Identity (e.g., Okta, Ping) are highly valued.•Hands-on technical expertise in cybersecurity, including security assessments, system auditing, and secure system development. Preferred Skills.● Broad technical expertise across multiple ZT pillars, including ICAM, Network Security (SDN, Segmentation), Cloud Security (AWS/Azure), Data Protection, and Endpoint Security.● Strong understanding of Zero Trust Architecture (ZTA) principles (NIST 800-207) and the DoD ZT Reference Architecture.● Proven experience in Systems Engineering processes, including requirements analysis, design, development, integration, and testing.● In-depth knowledge of Systems Security Engineering (SSE) principles (NIST 800-160) and the integration of security requirements into the system lifecycle.● Proven ability to troubleshoot and resolve complex integration issues involving disparate technologies, APIs, and platforms.● Skill in developing detailed technical documentation, including architectural diagrams, ICDs, and engineering plans.● Comprehensive knowledge of computer networking concepts, protocols, and network security methodologies.● Knowledge of authentication and authorization protocols (e.g., SAML, OAuth, OIDC) and access control methods (PKI, MFA, ABAC).● Strong analytical and problem-solving skills, with the ability to analyze complex systems and identify integration dependencies and risks.● Excellent communication and interpersonal skills, with the ability to collaborate effectively with diverse technical teams and advise senior architects and stakeholders.● Understanding of the operational requirements for systems functioning in DIL/Tactical Edge environments. The Company is an Equal Opportunity/Affirmative Action employer. All qualified candidates will receive consideration for employment without regard to disability, protected veteran status, race, color, religious creed, national origin, citizenship, marital status, sex, sexual orientation/gender identity, age, or genetic information. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Overview A software engineer is part of the software development team that creates software solutions for AEVEX. This person applies engineering principles and knowledge of programming languages to build these software solutions. This is mid-level position, and the ideal candidate will be an in-house expert for less experienced staff within the Engineering department. Essential Functions • Work with the Senior Software Engineer to define software requirements and take a leadership role on operational and technical projects., • Contribute during the entire software development process including requirements, design, implementation, test, debugging and deployment., • Develop Embedded Linux, Windows PC and microcontroller software applications using C, C++, Python and occasionally other programming languages., • Deploy and maintain software on Embedded Linux and Microsoft Windows PC based platforms., • Expand the capabilities of our software products by developing new features and Integrating data from hardware such as GPS/GNSS, LiDAR and Accelerometers., • Rapidly build and deploy moderately complex mobile applications leveraging Location Services, Maps, and other common Android/IOS libraries., • Manage coded components and design elements of a front-end design system in terms of versioning, technology, and requirements., • Be able to work creatively through and around perceived limitations to build fast and simplified user experiences., • Collaborate with other software developers, product owner/manager, and stakeholders to deliver creative and tailored custom solutions., • Ensure that design supports the client's goals and requirements and be willing to make adjustments to exceed expectations., • Assist in creating a vision for, and communicating creative solutions for a wide variety of user experience challenges (graphic creation/development, wireframes etc.), • Facilitate discussions on design and user experience and communicate clearly and effectively., • Stay up to date with the latest design trends and best practices., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Familiarity with Autopilot systems, ground control stations, or flight simulation software is highly desirable, • Knowledge of communication protocols (e.g. SPI, I2C, UART, CAN), • Proficient in software development of microcontroller level embedded systems, • Strong understanding of GPS, Inertial Navigation, Sensor fusion from a software architecture real-time processing perspective, • Ability to work independently with little supervision, • Possess excellent organization and problem-solving skills with extensive hands-on experience in software development, • 6+ years of software development experience, • Prior experience developing Autopilot systems, ground control stations, or flight simulation software is highly desirable The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description At Keeley Companies, we believe in empowering our people and fulfilling career aspirations. Keeley is a career destination with countless opportunities for advancement, and a world-class family culture that is centered around creating the best possible environment for our people to thrive. This role will be responsible for the overall management and leadership of the Lakeland, FL office specializing in Keeley's paving services. This role requires a deep understanding of paving operations, strong leadership skills, and the ability to drive business growth and ensure the highest levels of quality and customer satisfaction. Primary Responsibilities • Oversee and manage all branch operations, including project planning, execution, and quality control for paving projects., • Ensure that projects are completed on time, within budget, and in compliance with safety and quality standards., • Develop and implement strategies to grow the branch's customer base and revenue., • Identify new business opportunities, prepare bids and proposals, and negotiate contracts with clients., • Lead, mentor, and motivate a team of supervisors, project managers, paving crews, and support staff., • Provide guidance and training to enhance team performance and promote a safety-focused work environment., • Monitor and analyze financial performance, identifying areas for improvement., • Foster strong client relationships and ensure customer satisfaction by addressing concerns and delivering high-quality paving solutions., • Promote a culture of safety among employees and contractors., • Maintain accurate records, reports, and documentation related to projects, finances, and client interactions., • Provide regular reports to senior management on branch performance and progress.Minimum Qualifications, • Bachelor's Degree in Business, Engineering, Construction Management, related field, or equivalent work experience., • 10+ years' in the paving, asphalt, concrete or related industries performing the similar primary responsibilities listed., • Strong leadership and management skills in directing an organization, department, or group., • Advanced with Microsoft Office Suite #LI-BM1 All Keeley Brands (Keeley Construction Group, Keeley Properties, Keeley Restoration, Keeley Companies) do not accept unsolicited resumes from search firms, headhunters, or agencies. Any resume submitted to any employee of a Keeley company without a prior written search agreement will be considered unsolicited and the property of any Keeley Company. Please, no phone calls or emails. All Keeley companies are proud to be an equal opportunity employer regardless of race, color, gender, age, sexual orientation, gender identity, gender expression, religious beliefs, marital status, genetic information, national origin, disability, protected veteran status, or any other basis protected by federal, state, or local law.

Job Description Security Clearance • Active Top Secret DoD clearance preferred, U.S. Citizenship required. Work Arrangement Onsite with occasional travel. Job Overview Sr. Aeromechanical Engineers work to solve the nation's hardest problems through rapidly deployed technology solutions. Are you an aerospace or mechanical engineer stuck in a narrow job? Do you want to rapidly build autonomous systems aligned with your hobbies and interests? This job is a lead aeromechanical engineer that takes napkin sketches of airplanes and robots to final production. We work with small teams to move fast and make fielded systems. Here you will lead a small agile team to make these systems a reality from napkin sketch to 1.0 prototype. Essential Functions • Senior role within the engineering team that helps lead in the design and development of UAS products and subsystems., • Opportunity to build and tests prototype systems to validate designs, • Have decision-making abilities for design challenges and coordination with multidisciplinary engineering groups, • Performance of all vehicle designs from initial concept to complete production-ready design, • Conduct presentations (Formal and Informal) on designs., • Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes, • Makes complex decisions to meet stated and derived requirements, • Complete assigned tasks within the project schedule and budget, • Provide guidance and mentorship to others in both their discipline and company values, • Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts, • Act as an interface to customers as ideas are communicated, • Travel as required Standard Essential Functions Regular and reliable attendance on a full-time basis [or in accordance with posted schedule]. Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications and Competencies • Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving Thermodynamics problems, • Experienced in successfully designing mil-y electronics products, • Demonstrated understanding of metallic, plastic, and composite material properties, • Demonstrated ability to solve basic structural dynamics problems, • Proficiency in SolidWorks, Excel, Word, and PowerPoint is required, • Demonstrated understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.), • Experienced with designing: machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical assemblies for low, medium, and high-volume manufacturing processes, • Experienced with: mechanical, lab, field, flight, and environmental testing, • Demonstrated understanding of engineering configuration management processes, • Demonstrated ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team, • Demonstrated leadership experience, • Periods of development may require long irregular hours around deadlines, weekends, and some holidays and in-field test environments Education / Certifications • Bachelor's Degree in Mechanical or Aerospace Engineering Experience • Minimum of 8+ years of experience in a progressive technical capacity within an engineering organization Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Barbaricum is a rapidly growing government contractor providing leading-edge support to federal customers, with a particular focus on Defense and National Security mission sets. We leverage more than 17 years of support to stakeholders across the federal government, with established and growing capabilities across Intelligence, Analytics, Engineering, Mission Support, and Communications disciplines. Founded in 2008, our mission is to transform the way our customers approach constantly changing and complex problem sets by bringing to bear the latest in technology and the highest caliber of talent. Headquartered in Washington, DC's historic Dupont Circle neighborhood, Barbaricum also has a corporate presence in Tampa, FL, Bedford, IN, and Dayton, OH, with team members across the United States and around the world. As a leader in our space, we partner with firms in the private sector, academic institutions, and industry associations with a goal of continually building our expertise and capabilities for the benefit of our employees and the customers we support. Through all of this, we have built a vibrant corporate culture diverse in expertise and perspectives with a focus on collaboration and innovation. Our teams are at the frontier of the Nation's most complex and rewarding challenges. Join our team. We're looking for an experienced Senior Software Developer to support development, enhancement, and sustainment of enterprise-level applications within a dynamic mission environment. This is an opportunity to contribute to the architecture, design, and implementation of secure, scalable, and high-performing solutions that directly support critical operational requirements. The Senior Software Developer will design, build, and maintain modern web applications using .NET Core, Entity Framework Core, ReactJS, MS SQL Server, and supporting technologies. You will collaborate closely with product owners, UX/UI designers, and engineering teams to deliver intuitive user interfaces, efficient backend services, and seamless integrations within an enterprise environment. This position requires strong full-stack development experience, a commitment to secure coding standards, and the ability to support continuous integration and delivery pipelines in Azure DevOps. The ideal candidate is comfortable working across the entire development lifecycle—from architecture and design to deployment, troubleshooting, and optimization. Responsibilities: • Design, develop, and maintain web applications using .NET Core, Entity Framework Core, MS SQL Server, and ReactJS, • Build modern, responsive front-end experiences using Vite and contemporary JavaScript tooling, • Develop and maintain custom integrations and enhancements within SharePoint, • Architect and optimize SQL database structures, queries, functions, and stored procedures, • Partner with UX/UI designers, product owners, and engineering teammates to deliver high-quality solutions, • Manage source control and CI/CD pipelines using Azure DevOps, • Participate in technical planning sessions, code reviews, and architecture discussions, • Troubleshoot, debug, and resolve software issues across the stack, • Ensure adherence to best practices related to security, performance, scalability, and maintainability Required Qualifications: • Active DoD TS/SCI security clearance, • Bachelor's degree in IT, Cybersecurity, Computer Science, Information Systems, Data Science, or Software Engineering, • 10+ years of professional software development experience, • Active CSSLP, GSEC, or CISSP-ISSAP certification, • Strong proficiency in C#, .NET Core, Entity Framework Core, • Experience with ReactJS and modern front-end workflows (including Vite), • Strong understanding of MS SQL Server and relational database design, • Familiarity with SharePoint development and basic integration capabilities, • Proficiency with Azure DevOps, Git, and CI/CD pipeline management, • Experienced with Visual Studio and/or Visual Studio Code, • Strong problem-solving skills and ability to work in a fast-paced, collaborative environment Desired Qualifications: • Experience with Azure Cloud services, • Experience with containerization technologies (Docker, Kubernetes), • Knowledge of modern authentication protocols, including OAuth and OpenID Connect EEO Commitment All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law.

Job Description Job Overview As an Engineering Technician, you'll play a key role in supporting R&D projects and collaborating with cross-functional portfolio teams. You'll be involved in the end-to-end development of hardware prototypes, contributing to the design and assembly of PCB, mechanical components, and software scripts. Your work will include conducting tests and experiments that drive development toward manufacturing readiness, while maintaining thorough documentation and process records to track test data and results. This is a dynamic, fast-paced environment where collaboration is at the heart of everything we do. You'll have opportunities to explore a variety of projects and engage with a talented team of engineers to share knowledge and expertise. Essential Functions • Solder PCBs with Surface-Mounted Components (SMCs), • Solder wire harnesses and making cables based on minimal documentation, • Modify circuit boards using wire jumpers and PCB trace modifications, • Assist in the construction of testing platforms and event setups, • Review and interpret PCB layouts for accurate implementation, • Help design and model components using CAD software, including SolidWorks, for engineering applications., • Print 3D models and prototypes to support design validation and engineering development., • Collaborate in the fabrication process, ensuring quality control and precision in part creation., • Solder wire harnesses and making cables based on minimal documentation, • Assist in diagnosing and resolving technical challenges, contributing to project success., • Contribute to the design, assembly, and testing of UAV frames for advanced projects., • Implement and uphold 5S methodology to streamline workflows and develop efficient lean processes., • Meticulously document testing procedures and data to ensure accuracy and support repeatability in future projects., • Assist in diagnosing and resolving technical challenges, contributing to project success., • Provide support in the development and management of project timelines under the guidance of the lead engineer or program manager., • Carry out additional duties as assigned, contributing to the overall success of engineering and project goals., • Collaborate with Manufacturing team to help push products to delivery, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Knowledge of Electrical SMT and Software, • Knowledge of circuits, • Ability to understand schematics, assembly drawings, and PCB layout, • Ability to understand cable drawings, • Solid knowledge of Electrical and Aircraft Systems, • Associate degree in engineering or technical field preferred, • Preferred Certifications:, • J-STD-001, • 3-5 years of experience as an engineering technician or other relevant technical field, • Equivalent documented work experience in lieu of degree may be acceptable, • Experience with:, • CAD software, • 3D printing, • Altium PCB layout software, • Cable wiring for RC planes, • Understanding Gas engines, • Understanding electrical motors, • Solid Works The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to stand for extended periods of time Frequently required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a TS/SCI DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Job Overview As an Engineering Technician, you'll play a key role in supporting R&D projects and collaborating with cross-functional portfolio teams. You'll be involved in the end-to-end development of hardware prototypes, contributing to the design and assembly of PCB, mechanical components, and software scripts. Your work will include conducting tests and experiments that drive development toward manufacturing readiness, while maintaining thorough documentation and process records to track test data and results. This is a dynamic, fast-paced environment where collaboration is at the heart of everything we do. You'll have opportunities to explore a variety of projects and engage with a talented team of engineers to share knowledge and expertise. Essential Functions • Help Design and model components using CAD software, including SolidWorks, for engineering applications., • Print 3D models and prototypes to support design validation and engineering development., • Repairing 3D printers to ensure efficient printing and proper Software/ Firmware updates, • Operate CNC milling machines to fabricate precision parts for various engineering projects., • Collaborate in the fabrication process, ensuring quality control and precision in part creation., • Soldering wire harnesses and making cables based on minimal documentation, • Assist in diagnosing and resolving technical challenges, contributing to project success., • Contribute to the design, assembly, and testing of UAV frames for advanced projects., • Implement and uphold 5S methodology to streamline workflows and develop efficient lean processes., • Meticulously document testing procedures and data to ensure accuracy and support repeatability in future projects., • Work closely with cross-functional teams to facilitate the testing, completion, and optimization of components., • Assist in building and setting up platforms for both testing and event execution, ensuring functionality and safety., • Provide support in the development and management of project timelines under the guidance of the lead engineer or program manager., • Carry out additional duties as assigned, contributing to the overall success of engineering and project goals., • Collaborate with Manufacturing team to help push products to delivery, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Understanding and Knowledge in: • Electrical and Aircraft Systems, • Power and mechanical systems, • UAV and CUAV, • Electrical equipment (O-Scopes, DMM), • Gas engines, • Electrical motors, • Bamboo studios 3D print software, • Solid Works, • Proficient in Microsoft office (Excel, Word, Power point, ect.), • Ability to efficiently collaborate with others, • Ability to obtain new skills quickly, • 2-4 years of experience as an engineering technician or other relevant technical field, • Equivalent documented work experience in lieu of degree may be acceptable, • Experience with CAD software and 3D printing The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to stand for extended periods of time Frequently required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a TS/SCI DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Electrical Engineer/Designer Location is onsite in Tampa, FL. This is not a remote or hybrid position. PD Power Systems LLC is seeking an Electrical Engineer/Designer responsible for designing electrical and control systems for electrical power generation and distribution systems and equipment. The candidate will work closely with Mechanical Designers and Engineers in integrating controls into the electrical systems. The candidate must be familiar with electrical power generation, distribution, and various control systems to include PLCs, generator digital controls, and human machine interfaces. Experience with 2D CAD is required, experience with 3D CAD is desirable. The position requires close teamwork with other employees in engineering as well as support, both within the company and with subcontractors. Roles and Responsibilities • Prepare, edit and maintain electrical schematics, panel diagrams, cable assembles, and wiring drawings using AutoCAD software., • Create, maintain and troubleshoot PLC systems., • Be able to source components based upon customer requirements and specifications., • Education: 4-year Electrical Engineering degree with 5+ years of hands-on experience. OR, • Experience designing electrical control systems and power generation and distribution systems., • To include prototype builds, production builds, schematic designs, and troubleshooting and diagnosing system issues., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Experience with electrical power from low voltage AC (120/208V) through medium voltage (15kV)., • Understanding electrical design techniques, circuit protections, and principals involved in development of electrical drawings for Technical Data Packages (TDP)., • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description The Opportunity Are you a seasoned sales professional in the commercial construction industry with a passion for fostering relationships and closing deals? Triangle Fastener Corporation is seeking a National Account Representative to join our team. In this role, you’ll be the face of TFC when it comes to Metal Roofing and Insulated Metal Panel — cultivating long-term, trusting relationships with pre-engineered metal building manufacturers and metal roofing manufacturers, tailoring programs specific to each customer's unique needs and preferences. This is a field-based position requiring extensive travel both regionally and nationally About Triangle Fastener Corporation Since 1977, Triangle Fastener Corporation has been a trusted name in the construction industry. We are a leading wholesale distributor of standard and specialty fasteners, sealants, tools, and related construction products. With 30+ branches nationwide, including 3 distribution centers, and 9 paint facilities, we offer comprehensive solutions to builders across the U.S. Why Join Us? At TFC, we know that our people are the key to our success. We offer a collaborative, supportive work environment with industry-leading benefits, including: • Medical, Dental, and Vision Insurance, • Safe Harbor 401(k) with automatic employer contributions, • Company vehicle with insurance, maintenance, and fuel fully covered, • Company-paid short-term disability and life insurance, • Expense account, • Paid holidays starting Day 1, • Professional development through training and industry events What You’ll Do As a National Accounts Representative, you will: • Develop, build, maintain, and consistently grow the business while cultivating multi-level, trust-based relationships with pre-engineered metal building manufacturers and metal roofing manufacturers, tailoring programs to meet each customer's specific requirements., • Proactively engage with key purchasing and engineering decision makers within these accounts, nurturing influential relationships., • Conduct comprehensive presentations to educate and inform all key personnel within customer organizations., • Serve as a vital liaison and facilitate communication between customers and local branches, ensuring seamless updates on pricing, new products, and successes to meet or exceed customer expectations and satisfaction., • Monitor account performance through detailed sales reporting, collecting, and analyzing sales data to ensure exceptional service and maintenance by local branch field sales teams., • Promote TFC products, promotions, and services to enhance customer engagement and satisfaction., • Identify and strategically target potential new customers by leveraging trade associations, attending trade shows, networking, and other valuable lead sources. What You’ll Bring • A self-starting, goal-oriented mindset with strong problem-solving abilities, • Excellent communication and interpersonal skills, • Ability to manage a geographic territory effectively and independently, • Prior sales experience, especially in construction or industrial markets, is a strong plus, • Valid driver’s license and willingness to travel regularly Our Values Triangle Fastener Corporation is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Triangle Fastener Corporation's management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment.

Job Description Integrated Cooling Solutions (ICS) delivers HVAC solutions backed by technical expertise and strong manufacturer partnerships. With eight offices across Florida, we help clients design and implement the best systems for their space—backed by hands-on support and industry know-how. At ICS, people come first. We invest in our team's growth and success, creating a place where your work matters and your career can take off. If you're ready to be part of something dynamic and meaningful, we're excited you're here. The Opportunity Seeking a proven Service Sales individual with a demonstrated ability to navigate the existing building market and influence customers at multiple levels. Under minimal direction, this outside sales role is responsible for the sale of service solutions and products to targeted building owners and management companies. This position is commission based. Responsibilities • Identifies potential opportunities with existing and new customers by determines project needs, constraints and responsibilities to meet the customer's HVAC service requirements, • Use ROI selling strategies to address customer's operational and environmental objectives, needs and asset management requirements, • Demonstrates technical expertise to develop credibility, loyalty, trust and commitment, • Builds partnering relationships with the customers and individuals responsible for the decision-making process to steer the sale of service offerings, • Understands the customer's business and speaks their language, • Effectively writes, presents and communicates proposals. Negotiate value and close the sale, • Reviews, approves and presents the proposal, negotiates price, terms and conditions with customer, • Positively and credibly influences system / service solutions with customers. Frequently creates competitive, high quality and timely estimates, bids, proposals, and cost/benefit analysis, • Manages multiple, ongoing, opportunities focusing on selling service contracts, small turnkey projects and repairs., • Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing customer, • Solicits support from and communicates effectively with the entire service and sales team and support staff, • Keeps management informed of progress and account status. Knows when to call for assistance from management and team members to keep the sales process moving, • Provides weekly / monthly account business activity reports and annual forecasts, • Flexibility to work outside normal work hours, as required The Required Profile • Bachelor's Degree in Engineering, Business or related field and typically 1-10 years account management or project management/estimating experience; or equivalent experience, • HVAC, Mechanical Contracting, Engineering or Construction industry experience a PLUS, • Existing book of business and contacts in designated territory is preferred, • Excellent initiative, and interpersonal communications skills and a demonstrated ability to influence others, • Ability to prioritize, multi-task, deal with ambiguity and manage high volume projects, • Strong PC skills in Microsoft Office applications including Word, Excel, PowerPoint, and Outlook Other Skills/Abilities Strategic Skills Ability to learn new skills and knowledge. Ability to understand concepts and complexity comfortably. Open to change and will try anything to find solutions. Able to handle uncertainty and make decisions without knowing the whole story Operating Skills Ability to discern between tasks to determine how best to accomplish goals and organize task/people assignments to get results in a timely way. Ability to figure out processes and simplify them in order to maximize work flow. Behavior Skills Ability to manage people and situations when conflicts arise. Ability to seize opportunities with the drive to complete goals. Personal and Interpersonal Skills Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings. Negotiating Skills Ability to settle differences, compromise or reach agreement while avoiding argument and dispute. Presentation Skills Ability to communicate and transfer knowledge in a precise, concise and logical manner. Demonstrates professional facilitation skills and has a professional presence. Environmental Requirements Will be required to work in an office environment and frequently in the field. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description Barbaricum is a rapidly growing government contractor providing leading-edge support to federal customers, with a particular focus on Defense and National Security mission sets. We leverage more than 17 years of support to stakeholders across the federal government, with established and growing capabilities across Intelligence, Analytics, Engineering, Mission Support, and Communications disciplines. Founded in 2008, our mission is to transform the way our customers approach constantly changing and complex problem sets by bringing to bear the latest in technology and the highest caliber of talent. Headquartered in Washington, DC's historic Dupont Circle neighborhood, Barbaricum also has a corporate presence in Tampa, FL, Bedford, IN, and Dayton, OH, with team members across the United States and around the world. As a leader in our space, we partner with firms in the private sector, academic institutions, and industry associations with a goal of continually building our expertise and capabilities for the benefit of our employees and the customers we support. Through all of this, we have built a vibrant corporate culture diverse in expertise and perspectives with a focus on collaboration and innovation. Our teams are at the frontier of the Nation's most complex and rewarding challenges. Join our team. Barbaricum is seeking a Journeyman Full Stack Application Developer to support the USSOCOM J6 Budget Tool. This role will design, develop, test, and sustain enterprise-level applications that drive high availability, reliability, and performance. The developer will work as part of a cross-functional team supporting mission-critical financial systems, ensuring compliance with DoD standards, USSOCOM requirements, and cybersecurity policies. Candidates must bring demonstrated expertise in both front-end and back-end development, with proficiency in Angular, .NET, C#, SQL Server, and Windows Services. Responsibilities: • Design, develop, test, and maintain application features supporting the USSOCOM J6 Budget Tool, • Implement responsive front-end interfaces using Angular, • Develop back-end services and APIs with .NET and C#, • Design, optimize, and maintain SQL Server databases, queries, and stored procedures, • Develop and sustain Windows Services for workflow automation and integration, • Conduct code reviews, unit testing, and integration testing, • Ensure all applications adhere to DoD cybersecurity and secure coding standards, • Support lifecycle activities including requirements gathering, design documentation, deployment, and sustainment, • Active DoD TS/SCI clearance, • DoD 8140/8570 IAT Level II certification (e.g., Security+ CE, CCNA Security, CySA+, GICSP, GSEC, SSCP), • Bachelor's degree in Computer Science, Information Systems, Engineering, or related field; or equivalent experience, • 3–7 years of experience as an application developer, • Demonstrated expertise with:, • Angular (front-end development), • .NET and C# (back-end development), • SQL Server (database design and optimization), • Windows Services (design and sustainment), • Experience with Agile development methodologies, • Experience supporting USSOCOM or DoD financial systems, • Familiarity with DevSecOps tools, CI/CD pipelines, and automated testing frameworks, • Experience with containerization (Docker, Kubernetes) and cloud services, • Familiarity with PowerApps/O365 environments All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law.

Job Description Mechanical Engineer/Designer Located in Tampa, FL (Onsite). This is not a remote or hybrid position. The Mechanical Engineer is responsible for the design and development of electro-mechanical equipment. Potential hire will be working directly with the design team and manufacturing vendor. Candidate will design, troubleshoot, diagnose, and solve challenges related to product development. This includes root cause analysis, working with suppliers and in-house support personnel, and design improvements from concept to production. Candidate will also be responsible for maintaining, updating drawings and Bills of Material and offer test support. This position is onsite at our Springfield, VA office. Roles and Responsibilities • Design systems and integrate the multiple systems using SolidWorks from initial concept stage through production launch., • Generate and provide analysis of FEA studies in Solidworks., • Generate and analyze drawings from parts/assemblies IAW ASME 14.100 and MIL- STD-31000., • Assist in production problem solving by interfacing with the manufacturing team to find creative solutions., • Education: 4-year Mechanical Engineering degree with 5+ years of hands-on experience. OR, • Experience designing mechanical systems and power generation and distribution systems., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Excellent verbal and written communication skills, problem solving abilities., • Must be eligible to receive U.S. Security Clearance, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Senior Mechanical Engineer/Designer Located in Tampa, FL (Onsite). This is not a remote or hybrid position. The Senior Mechanical Engineer is responsible for the design and development of electro-mechanical equipment. Potential hire will be working directly with the design team and manufacturing vendor. Candidate will design, troubleshoot, diagnose, and solve challenges related to product development. This includes root cause analysis, working with suppliers and in-house support personnel, and design improvements from concept to production. Candidate will also be responsible for maintaining, updating drawings and Bills of Material and offer test support. This position is onsite at our Springfield, VA office. Roles and Responsibilities • Design systems and integrate the multiple systems using SolidWorks from initial concept stage through production launch., • Generate and provide analysis of FEA studies in Solidworks., • Generate and analyze drawings from parts/assemblies IAW ASME 14.100 and MIL- STD-31000., • Assist in production problem solving by interfacing with the manufacturing team to find creative solutions., • Education: 4-year Mechanical Engineering degree with 10+ years of hands-on experience. OR, • Experience designing mechanical systems and power generation and distribution systems., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Excellent verbal and written communication skills, problem solving abilities., • Must be eligible to receive U.S. Security Clearance, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description The Project Manager manages the full scope of work from preparation of proposal through construction. Duties include overseeing all technical aspects of transportation/roadway projects, reviewing all documents for quality control and quality assurance, and coordinating engineers and sub-consultants. This position is based in AVCON's Tampa, Florida office. ESSENTIAL FUNCTIONS (may include but are not limited to): Project Management: • Responsible for design and management of transportation/roadway engineering projects including ensuring completeness and accuracy of design effort., • Responsible for the various design elements to complete a project, system, component, or system with other team members with clear and specified objectives involving conventional types of plans, surveys, investigations, structures, and/or equipment., • Prepares complete project documentation to include plans, specifications, and engineer estimates including the collection, assembling, and organizing of project data., • Evaluates, selects, and adapts standard techniques, procedures, and criteria to project assignments; formulates and solves problems., • Works on multiple projects of moderate to large size using time efficiently to stay within budget and timely delivery., • Develops proposals including bid documents, project reports, studies, and other documentation., • Attends project meetings and presents specific aspects of engineering assignments/projects., • Coordinates technical and administrative activities with other internal departments and disciplines participating in the project., • Ensures project engineering activities comply with firm and contract requirements and support overall project schedule, scope and budget., • Interprets contract specifications and resolves conflicts with contractor on such matters as interpretation of specifications, workmanship, quality of materials, and related matters., • Maintains list of project milestones and issues in-progress., • Prepares monthly project status reports and change orders., • Participates in client/contractor meetings, and resolves client, engineering and management project issues., • Assists in marketing and business development pursuits., • Attends industry forums., • Identifies potential clients., • Interacts and collaborates with clients, officials, contractors, and other project team members., • Bachelor's or Master's degree in Civil Engineering., • 7+ years' experience., • Working knowledge of AutoCAD, AutoCAD Civil 3D or Bentley OpenRoads., • Ability to work cooperatively and collaboratively with all levels of employees, management, and clients., • Ability to organize work, set priorities, meet critical deadlines, and follow-up on assignments with minimal supervision., • Ability to maintain confidentially and protect privileged client information and documents appropriately., • Valid drivers' license and maintenance of satisfactory driving record. There are supervisory responsibilities associated with this position. ENVIRONMENT Work usually takes place in a clean, pleasant, and comfortable office setting. Site visits may occasionally take place in an outdoor environment. Nights and weekends are generally not required but may occasionally be necessary with little or no advanced notice. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit for long periods of time. The employee is occasionally required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to ten (10) pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. TOOL/PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS As dictated by client site protocol, candidate will be required to utilize proper personal protective equipment including but not limited to gloves, sleeves, leather protectors, hard hats, safety vests, safety glasses and shields, hearing protection, safety shoes, covers, helmets/hoods, and any additional tools required for the task at hand. DISCLAIMER This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Management reserves the right to make adjustments and/or assign or reassign any portion of this job description at any time with or without notice. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER AVCON, INC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, AVCON complies with applicable state and local laws governing nondiscrimination in employment at every location in which the company has facilities. This policy applies to all terms and conditions of employment including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. AVCON expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of AVCON's employees to perform their job duties may result in discipline up to and including discharge. Please CLICK HERE and scroll down to our Benefits section to learn more about the potential Benefits you may be eligible to receive with this position. Founded in 1988, AVCON, INC. (AVCON) serves the aviation, facilities, transportation, and development industries and employs over 130 professionals with expertise in all aspects of aviation planning and design; civil, structural, electrical, mechanical, and plumbing engineering; fire protection design; utilities coordination and design; traffic planning and highway design; and a full array of design and construction support services. AVCON has built its reputation on delivering innovative and practical engineering solutions to clients, blending economic, sustainable, and technological elements into each project. Whether working on a building facility, roadway, or airfield, AVCON offers high-level technical expertise based on more than three decades of hands-on experience-ensuring the job is done right the first time. AVCON prides itself on partnering with clients in Transforming Today's Ideas into Tomorrow's Reality. NOTICE TO THIRD PARTY AGENCIES: Please note that AVCON does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, AVCON will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, AVCON explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of AVCON. Job Posted by ApplicantPro

Job Description We are seeking a technically capable, business-minded Engineering and Procurement Specialist who is passionate about engaging with customers on-site to understand their engineering and manufacturing workflows, identify pain points, and drive solutions that generate measurable business impact. This role is pivotal in maximizing customer satisfaction and expanding adoption of meviy services.（Note: meviy is a free platform for on-demand manufacturing services provided by MISUMI.) The ideal candidate will possess a solid engineering foundation, a proactive mindset for problem-solving, and a strong drive to take ownership of the customer relationship from both a technical and strategic business perspective. A successful candidate will actively contribute to business growth by uncovering engineering challenges and proposing meviy-based solutions that not only align with the customer’s production goals, but also streamline their engineering and procurement processes, ultimately enhancing their competitiveness and driving our own revenue growth. Responsibilities include: • Independently develop and regularly visit assigned target customers to understand their on-site engineering and manufacturing processes, identify issues across the engineering chain, and provide meviy-based improvement proposals., • Develop and execute customer success and usage strategies aligned with customer goals to promote the continuous and habitual use of meviy., • Build strong relationships with key stakeholders such as engineers, purchasers, and project managers., • Collaborate with internal teams (engineering, operations, and product) to ensure customer needs are addressed effectively., • Track, analyze, and report customer success metrics and engagement outcomes to management., • Development of industry-specific sales strategies for meviy, • Travel may be required up to approximately 60% of the time., • Perform other related duties as assigned.Requirements:, • Bachelor’s degree in engineering, manufacturing, materials or related field., • Demonstrates a hands-on, solution-oriented approach to reaching out to customers independently, • Experience using 2D/3D CAD software, • Work experience in the manufacturing industry, • Basic knowledge of design and procurement processes, • Strong problem-solving skills with the ability to identify issues and implement effective solutions, • Excellent communication skills to collaborate with internal and external stakeholders and drive projects forward, • Strong verbal and written communication skills, with the ability to explain complex ideas clearly, develop strategies, and manage projectIn addition to these requirements, we prefer the following attributes:, • 5+ years of practical experience in Sales engineering or Equipment design, at a Line or Machine builder, • Possesses knowledge of the automotive, medical, and aerospace industries., • Experience using business intelligence tools such as Salesforce and Tableau, • Knowledge of enterprise systems such as PLM, PDM, and CRMPay Rate: a base salary in the 65k to 75k range plus an annual bonus. This is the lowest to highest salary we in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay within the salary range will be based on several factors including, but limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location and prevailing minimum wage, performance, shift, travel requirements, sales or revenue-based metrics, and business or organizational needs. Benefits Offered: We offer a comprehensive package of benefits including Medical (HMO/PPO/HDHP), Vision, Dental, Life (Basic and AD&D), Disability (STD and LTD), Legal, and Pet Insurance Plans, 401(k) Plan with match, Commuter Transit Benefits, Employee Resource (EAP and GEAS) Plans, Fitness Club Membership, Tax Savings (HAS and FSA) Plans, Parental Leave, Paid Time Off, and Paid Holidays. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or any other form of compensation for any particular employee remains in the Company’s sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law. Applicants must currently be authorized to work in the United States on a full-time basis. Sponsorship for work authorization is not available. MISUMI is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, veteran status, disability, marital status, sexual orientation, citizenship status, genetic information, gender identity, or any other protected status under applicable law. FOR CALIFORNIA RESIDENTS: MISUMI USA, Inc. (“MISUMI”) complies with the California Consumer Privacy Act (“CCPA”), California Privacy Rights Act (“CPRA”), and other applicable privacy laws. We may collect the following categories of personal information for purposes of the application and hiring process: name and contact information (phone number; mailing address; email address(es)); education and qualifications; employment history and experience; LinkedIn profile; and other information voluntarily provided by the applicant. Under the CCPA and CPRA, California residents have the right to know, correct, delete, and/or limit the use of certain information collected by MISUMI. For further information, see our full privacy policy at . If you have any concerns, please send an email to . Powered by JazzHR zAmkh2n6d3

Job DescriptionSyms Strategic Group (SSG) is seeking a talented Senior Database Engineer Location: Remote Department: Veterans Affairs Type: Full Time Min. Experience: Experienced Security Clearance Level: Public Trust (MBI) Military Veterans are highly encouraged to apply! Essential Duties and Responsibilities • Establish database management systems, standards, requirements, guidelines, and quality assurance for database deliverables, such as conceptual design and architecture, logical database, capacity planning, external data interface specification, data loading plan, data maintenance plan, and security policy, • Work with clients to translate business requirements into a logical model that will accurately support and represent the client’s entity relationship and flow of data, • Develop the appropriate database framework to convert the logical model into a physical model including the creation and maintenance of schemas containing windows, screens, tables, and columns and reports that support the model, • Make recommendations to maximize operating efficiency, support storage requirements and vendor software updates, enforce data governance, and ensure recovery is maintained, • Participate in quality assurance and develop test application code in client server environment Required Skills and Experience, • A proven track record of working with complex database systems and data warehousing solutions, • Experience with database design, architecture, and data modeling, • Proficiency in Structured Query Language (SQL) programming and query optimization, • Strong knowledge of database management systems (DBMS) such as Microsoft SQL Server, Oracle, MySQL, or PostgreSQL, • Experience with performance tuning, indexing, and database query optimization techniques, • An ability to write and troubleshoot complex SQL queries, stored procedures, and triggers, • Familiarity with Extract, Transform, and Load (ETL) processes and tools (e.g., SQL Server Integration Services (SSIS), Informatica, Talend), • An understanding of data warehousing concepts and technologies, • Knowledge of backup and recovery processes, • Experience with database security, user roles, and permissions, • Proficiency in scripting languages such as Python or PowerShell for database automation tasks, • Strong analytical and problem-solving skills, • Excellent communication and collaboration abilities, • Capability to work independently and as part of a team, • Attention to detail and commitment to high-quality work, • Ability to prioritize multiple tasks and meet deadlines, • A strong understanding of business processes and requirements gathering, • Ability to mentor and provide technical guidance to junior developers, • Experience in a high paced DevOps environment, • Experience in large scale Enterprise environments, • SSG will not make assumptions regarding your qualifications. Your answers to the mandatory screening questions must be supported by the information on your resume. Applications with inconsistencies will not be considered., • Recruiters or Third parties will not be considered., • This is a 100% U.S. based remote position. However, candidates from CA, CO, IL, NJ or NY will not be considered., • This can be a W-2 or a 1099 position, • All interviews will be conducted on Microsoft Teams with your camera on; there will be no exceptions Syms Strategic Group, LLC is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, marital status, disability, veteran status, sexual orientation, or genetic information. Powered by JazzHR pnJDjuEEVn

Job Description REMOTE PHARMACY TECHNICIAN Job Description We are seeking dedicated Registered Pharmacy Technicians to join our call-center team. This role involves managing a high volume of inbound phone calls and handling various tasks related to patient prescriptions. The ideal candidate will demonstrate strong communication skills, particularly in verifying HIPAA information and maintaining confidentiality while interacting with patients and providers. Responsibilities • Handle a high volume of inbound calls in a call-center environment., • Receive, review, and verify patient prescriptions., • Prepare and scan documents, verifying patient data, and submit prescription orders into the pharmacy data system., • Engage in active listening with callers, confirming or clarifying information, and diffusing upset patients or providers as needed., • Work closely with pharmacists and pharmacy teams to ensure timely fulfillment of patient and provider needs., • Coordinate with call center Hub program(s) as applicable., • Coordinate the order and enter prescriptions according to their urgency through the pharmacy processing system., • Maintain professionalism and document within processing systems according to policies and procedures., • Efficiently enter data and information into the pharmacy processing system., • Prioritize and organize work to meet deadlines., • Registered Pharmacy Technician license., • Proficiency in data entry and strong computer skills., • Knowledge of pharmacy operations, prescription processes, and customer service., • Experience working in a call center or retail pharmacy environment., • Ability to manage dosing and dosage inquiries., • 1-2 years of pharmacy work experience preferred., • Spanish language proficiency is an advantage., • Experience with non-commercial pharmacy settings., • Strong time management and organizational skills., • Adaptability and flexibility in a dynamic work environment., • Efficient typing skills., • High School Diploma or GED., • Florida Board of Pharmacy Registered Pharmacy Technician license., • Proficiency in email programs, instant messaging, and Microsoft Office Suite., • Ability to multitask and handle multiple requests simultaneously. This is a Contract to Hire position based out of Tampa, FL. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Dec 16, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Job Overview The Embedded Systems Group Lead serves both as lead engineer and as a technical manager. The Group Lead provides both technical direction and organizational leadership for the embedded systems software engineering team developing advanced autonomy, control, and mission systems for AEVEX's UAS platforms. This individual serves as an in-house expert, both for managers from other departments who need software solutions and the less experienced staff within the department. The Embedded Systems Group Lead serves as the primary leader and advocate for the software engineering team representing their needs, removing roadblocks, and acting as their voice to program management, customers, and company leadership. This role bridges technical execution and strategic alignment ensuring that software deliverables meet mission, schedule, and quality objectives while fostering a high-performance engineering culture. The Group Lead looks at different possible solutions and how feasible those options are. The Group Lead will oversee multiple concurrent projects, day-to-day leadership of engineers, resource management, and serve as the primary interface between the software team and program management, systems engineering, flight test, customers, and company leadership. The Group Lead is also responsible for keeping proprietary information confidential. Essential Functions • Lead a multidisciplinary software engineering group responsible for embedded, autonomy, and ground-station UAS software development., • Manage team workload, task assignment, and performance across multiple concurrent programs., • Balance staffing, priorities, and technical focus to meet both near-term deliverables and long-term capability growth., • Interface with Flight Test, Systems Engineering, and Hardware teams to ensure system-level integration and rapid iteration., • Serves as the primary interface between software engineering, program management, customers, and executives., • Coordinates seamlessly with systems, hardware, and test teams to deliver integrated UAS capabilities, • Implement networked and containerized system design., • Provide cradle-to-grave ownership of software developed after release, including updates, support, and technical oversight., • Integrate and maintain real-time systems for flight-critical and autonomy software components., • Design and oversee integration of sensors, GPS/INS fusion, and communication protocols (SPI, I2C, UART, CAN, TCP/UDP)., • Develop and maintain software for embedded Linux and microcontroller-based systems using C, C++, and Python and occasionally other programming languages (C#, Lua, etc)., • Guide implementation of frameworks such as Docker, ROS2, MAVLINK, and TCP/UDP communication for distributed autonomy and mesh networking., • Oversee embedded and UAV autonomy system software design and integration., • Oversee CI/CD pipelines, software-in-the-loop (SIL) and hardware-in-the-loop (HIL) testing environments., • Oversee communication protocol design and debugging across mixed hardware interfaces., • Oversee integration of sensors, radios, routers, and mission equipment into distributed UAV systems., • Evaluate and integrate new frameworks, open-source libraries, and technologies into the tech base., • Define and document software requirements, architectures, and interfaces across embedded and companion computing environments., • Conduct real-time performance optimization and deterministic behavior assurance., • Promote configuration management, versioning, and documentation discipline., • Encourages experimentation and technical excellence while ensuring disciplined engineering practices., • Anticipate technology needs and workforce scaling., • Perform other duties as required., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Understanding of configuration, troubleshooting, data analysis, and integration of a wide variety of applications and equipment such as internal software libraries and products, GPS receivers, LiDAR sensors, inertial sensors, network routers, radio modems, serial port hubs, etc., • Proficiency in C, C++, Python, and exposure to C#, Lua, or similar languages., • Hands-on experience with ArduPilot or PX4 frameworks preferred., • Familiarity with ROS, Docker, and distributed networked systems., • Understanding of DevOps, CI/CD, version control, and software verification in R&D environments., • Ability to clearly convey complex technical concepts and program status to diverse internal and external audiences., • Ability to aligns technical execution with program and company objectives., • Ability to task technical risks in a chaotic environment., • Champions AEVEX's culture and empowers employees to take responsibility for their jobs and goals., • Engages employees by creating a climate in which they want to do their best., • Sets performance standards and encourages employee engagement and results through delegation, continuous feedback, goal setting, and performance management., • Maintains employee work schedules., • Provides oversight and direction to the employees in accordance with AEVEX's policies and procedures., • Ability to serves as lead advocate for the Software team, consistently representing and supporting the engineering team's needs and perspectives to leadership., • Ability to build and develop high-performing teams through mentorship, accountability, and empowerment., • Ability to clearly articulates expectations to Software team and is transparent in decision making., • 7+ years of software development experience, with experience in technical leadership or teamlead roles preferred., • Proven experience developing autopilot systems, ground control stations, or flight simulation software., • Prior experience in robotics, autonomous systems, or multi-agent coordination is highly preferred., • Extensive experience with embedded systems and Linux-based environments., • Experience in communication protocol design and debugging across mixed hardware., • Experience across defense and commercial UAV applications., • Experience on both military and commercial applications. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Security Clearance AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionSyms Strategic Group (SSG) is seeking a talented Senior Functional Analyst Location: Remote Department: Veterans Affairs Type: Full Time Min. Experience: Experienced Security Clearance Level: Public Trust (MBI) Military Veterans are highly encouraged to apply! Essential Duties and ResponsibilitiesPrevious Federal Government experience and Security Clearance highly desired! • Lead the capture of business requirements for software development teams, • Collaborate with business users, Information Technology (IT), and leadership to elaborate and document requirements in an Application Lifecycle Management (ALM) tool, • Manage requirements in an ALM tool, • Perform Agile requirement management activities for a product team, • Perform the analysis of user needs to determine functional, cross-functional, and technical requirements, • Conduct user interviews, lead and facilitate sessions, and develop business process models and formal specifications, • Work with customers, team members, stakeholder users, and other contractors to gather and document business, functional, technical, and non-technical requirements, • Perform elaboration of user stories and decomposition of stories into backlog items and determine acceptance criteria, • Use an ALM tool (JIRA) for Requirements Management, Testing, and Defect Management to create and manage requirements, epics, sub-epics, and user stories, • Perform the collection, tracking, and monitoring of system and business requirements, • Validate requirements and integration, • Conduct backlog refinement sessions, • Coordinate with Systems Engineers to assess impact on technical solutions, • Manage and coordinate requirements for various projects, • Write and deliver project documents to the client, • Identify and manage risks and issues impacting the progress and outcome of the project, • Develop and maintain the scheduled project/product backlog(s), • Own and manage requirements change control, • Develop Change Requests per established policies and procedures, • Facilitate accurate configuration management for project-related artifacts, • Identify, document, verify, and track traceability amongst requirements, test cases, and potential risks and impediment, • Collect, analyze, manage, and report key Program and Product Team execution status and metrics across all aspects of the Agile product development lifecycle using SAFe, • Perform analysis to identify required tasks and their interrelationships to establish well-documented stories, • Become a product functional Subject Matter Expert (SME), • Lead and mentor junior analysts in accordance with strategy and direction established by the Team Lead, • Establish strong relationships with product and business owners, • Support development team as needed to help everyone understand the requirements’ details, • Follow Agile methodology (Scrum) and deliver requirements/specifications for Sprint teams, • Remove impediments from team members to achieve successful completion of Sprints, • Provide clear qualitative and quantitative information to teams and stakeholders, • Support change control processes established to monitor and control project scope Required Skills and Experience, • Must possess a strong background in software development and Agile/Scaled Agile Framework (SAFe) methodologies, • Must possess excellent oral and written communication skills with the demonstrated ability to communicate complex technical topics to the customer, management, and non-technical audiences, • Must possess excellent attention to detail, customer service skills, and problem-solving abilities, • Past experience conducting independent research to support the resolution of complex questions, • Must possess advanced experience with Microsoft (MS) Office, including Excel, • Must possess excellent analytical skills, including integrating information from several sources, • Expertise with JIRA tools, • SSG will not make assumptions regarding your qualifications. Your answers to the mandatory screening questions must be supported by the information on your resume. Applications with inconsistencies will not be considered., • Recruiters or Third parties will not be considered. Syms Strategic Group, LLC is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, marital status, disability, veteran status, sexual orientation, or genetic information. Powered by JazzHR u9ZqU5c5Zu