Manufacturing process engineer jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000 - $85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR FRVKwUedJI

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Sheet Metal Process Engineer Reports to: Fabrication Director Your Role: The Sheet Metal Process Engineer is responsible for shepherding products through the production process, while ensuring customer delivery and quality requirements are satisfied. This high impact role requires innovative thinking, a high sense of urgency and collaborating in a cross-functional environment. Responsibilities Include: • Develop and validate manufacturing processes for new products, including tooling, fixtures, and assembly methods., • Participate in design reviews to ensure manufacturability and cost-effectiveness., • Interpret and clarify engineering drawings, BOMs, and specifications for internal teams and external suppliers., • Serve as the primary point of contact for technical questions related to the TDP., • Ensure documentation is complete, accurate, and production-ready., • Define and optimize processes., • Support root cause analysis and corrective actions for production issues., • Implement lean manufacturing principles and continuous improvement initiatives., • Work closely with procurement, quality, and supplier engineering teams to ensure alignment on technical requirements., • Collaborate with design and R&D teams to ensure manufacturability of new products., • 5+ years hands-on experience of bending, forming, welding and finishing processes., • .AS/BS in relevant technical field., • Strong understanding of NPI processes and design-for-manufacturing (DFM) principles., • Familiarity with ERP and PLM systems., • Experience working with suppliers and contract manufacturers., • Proficiency in CAD software (e.g., SolidWorks) and manufacturing systems (e.g., PDM, Autodesk Vault, SW Composer)., • Knowledgeable in programming., • Proficiency in interpreting engineering drawings, GD&T, and BOMs., • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision ProductsA reasonable estimate of the compensation range for this position is $60,000.00 - $90,000.00 per year. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR UUQJBe6ntM

Job Description Title Senior Thin Film Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: We are seeking a highly experienced and innovative Senior Thin Film Coating Engineer to lead the design, development, and optimization of advanced optical coatings for precision optics applications. This role is pivotal in supporting high-performance imaging systems, spectroscopy, aerospace, defense, and semiconductor technologies. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: * Design and optimize complex thin film coatings (e.g., AR, beam splitters, bandpass filters) using industry-standard software (TFCalc, Macleod, FilmStar). * Lead development of coating processes using PVD technologies including magnetron sputtering, ion beam sputtering, and electron beam evaporation. * Collaborate with cross-functional teams to translate customer specifications into manufacturable coating solutions. * Perform spectral and interferometric measurements using spectrophotometers and other metrology tools. * Develop and maintain process documentation including FMEA, control plans, and PPAPs. * Troubleshoot coating defects and implement root cause corrective actions. * Mentor junior engineers and technicians; provide technical leadership across coating operations. * Support continuous improvement initiatives using Six Sigma, SPC, and Lean methodologies. * Interface with customers to present technical solutions and ensure product compliance. * Participate in Material Review Board (MRB) activities and disposition of discrepant materials. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics. 8–10 years of experience in optical thin film coating design and manufacturing. * Deep understanding of high vacuum systems, deposition physics, and thin film characterization. * Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. * Experience in low-volume, high-mix production environments is a plus. • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs, • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description Akkodis is recruiting for a Controls Engineer in Rochester, NY. As a Controls Engineer, you will be responsible for the design, development, and implementation of electromechanical hardware and software solutions. Expertise in PLC programming, schematic design, electrical testing, and troubleshooting is required. The salary for this Controls Engineer is from 90K to 100K. The rate may be negotiable based on experience, education, geographic location, and other factors. Key Responsibilities for the Controls Engineer include: * Create and review electrical schematics, wiring diagrams, and other technical documentation. * Develop and maintain PLC software for various applications, including automation, process control, and robotics. * Assist in creating specifications, critical parameters and statement of work. * Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development. * Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability. * Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment. * Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies. Participate in all phases of the product lifecycle, from concept and design to manufacturing, testing, and installation. Requirements for the Controls Engineer include: Bachelor's degree in Electrical Engineering or a related field. * 3 years of experience in electromechanical hardware and software design and development. * Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell). * Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN). * Experience with electrical testing equipment and procedures. * Excellent analytical, problem-solving, and troubleshooting skills. * Strong communication, interpersonal, and teamwork skills. * Ability to work independently and as part of a team. * Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing). * Knowledge of C programming * Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. If you are interested in this Controls Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to . If you have questions about the position, please contact Mike Keegan at 585-465-1236 or mailto:"> Benefit offerings available for our associates include medical, dental, vision, and a 401K plan. Pay Details: $90,000.00 to $100,000.00 per year Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job DescriptionDescription: Addison Precision Manufacturing is a world-class contract manufacturer of precision-machined components. Our focus reflects a commitment to machining excellence, and we strive to deploy the latest technologies to meet the highest standards of any industry requiring precision machined components, including customers in the aerospace, aircraft, medical and precision manufacturing industries. In 2019 we built a brand new, air conditioned, state of the art, manufacturing facility. We are looking to build our team here. Addison Precision Manufacturing is looking for Process Engineer who will develop and maintain processes in a lean manufacturing setting. The Process Engineer works with both the customer and fellow departments to develop and improve the manufacturing process by studying product and manufacturing methods. Process Engineers have the ability to contribute their knowledge and ideas to improve upon current processes, resulting in reduced cycle times, improved quality of product and increased cost savings. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Duties & Responsibilities: • Support manufacturing in productivity and quality improvements, • Assure product and process quality by designing testing methods, establishing standards., • Develop and maintain manufacturing process flows., • Collaborate with Engineers, Contractors and Suppliers, • Optimize processing capabilities through use of continuous improvement principles, • Assist in the development (design and machine) new/existing features., • Support Root Cause Analysis and Corrective Action determination, • Bachelor's or Master's degree in Engineering preferred or equivalent experience., • Previous experience as a process engineer or similar role preferred., • Familiarity with manufacturing equipment and quality assurance techniques., • Project management skills, • Problem solving ability, • Strong GD&T knowledge, • Continuous commitment to health and safety standards., • Contribute to a team effort as well as being able to work independently.

Job Description Research Engineer Founded in 2017 and headquartered in Rochester, NY, REMADE℠ is a 170+ member public-private partnership funded in part by the U.S. Department of Energy’s Office of Advanced Materials and Manufacturing Technologies (AMMTO) with an initial investment of $140 million. REMADE is the only national institute focused entirely on developing innovative technologies to accelerate the U.S.’s transition to a Circular Economy. In partnership with industry, academia, trade organizations, and national laboratories, REMADE enables early-stage applied research and development that will create jobs, dramatically reduce embodied energy and greenhouse gas emissions, and increase the supply and use of recycled materials. For more information about REMADE (Reducing EMbodied Energy And Decreasing Emissions), visit . Position Summary The primary responsibility of this position is to support the development and administration of state grant programs that support the creation of technologies to expand the waste tire market and fund demonstration projects aimed at increasing the use of waste tires. This role is vital for driving innovation and fostering sustainable solutions for waste tire management throughout New York State and beyond. The successful candidate will play a major role in managing these grant programs, collaborate with stakeholders, and guide the development of both technology initiatives and demonstration projects focused on expanding the use of waste tires. In addition to managing the tire recycling program, the research engineer will support the broader mission of the Institute by fostering relationships with stakeholders in industry, academia, and government, conducting research on market trends, opportunities, and barriers to new technologies, assisting in the preparation of proposals for securing government or private funding, and contributing to other Institute initiatives as needed. This job is based in the Rochester, NY office. Salary Range: $75k to $90k Primary Responsibilities • Support the development and oversight of a state-funded grant program for waste tire management and the expansion of recycling markets. This includes designing and administering the grant application process, establishing criteria and evaluating proposals, and overseeing the selection and contracting of recipients., • Establish clear objectives, timelines, and milestones for grant recipients. Monitor progress and ensure that projects remain within scope, budget, and timeframe. Conduct site visits and inspections as necessary to evaluate project outcomes and compliance., • Provide technical expertise and guidance to applicants and stakeholders, ensuring that the proposed technologies or solutions meet industry needs and demonstrate feasibility, scalability, and sustainability., • Submit all necessary reporting to state and regulatory bodies. Ensure all activities comply with state laws, regulations, and grant guidelines., • Build strong relationships and promote engagement with stakeholders from industry, academia, and government agencies., • Promote knowledge sharing and best practices in the rubber and tire recycling industry., • Conduct online research to identify market trends, evaluate market opportunities and identify technical, economic, environmental and institutional barriers to the implementation and deployment of new technologies relevant to building a circular economy, • Assist in the preparation of proposals to obtain government and/or private funding of new projects or initiatives, • Experience in one of the following areas:, • Markets for recycled products, preferably rubber, • Technologies for tire recycling, • Rubber compound formulations and manufacturing processes, • Regulations governing waste tire disposal, • Familiarity with New York State businesses involved in tire disposal, recycling, and related activities, • Experience working with federal and/or state agencies, with a preference for candidates who have managed government-funded grant programs, • Project management experience with technical projects in a research environment preferred, • Capable of conducting technology assessments for new and emerging technologies using tools such as technoeconomic analysis, net energy analysis, Lifecyle analysis, and market opportunity analysis., • Benchmarking of new or emerging technology relative to the state-of-the-art, • Ability to systematically analyze complex, technology centric problems, identify technical, economic, market, and institutional barriers to the adoption of emerging technologies, and develop and implement effective solutions., • Strong verbal and written communication skills, and ability to convey complex information in a way that others can readily understand, • Strong attention to detail, ability to multi-task and work effectively in a fast-paced environment, • Grant/proposal writing experience a plus, • Bachelor’s Degree required in engineering or other technical related fieldThe REMADE Institute does not discriminate in the screening or submission of candidates on the basis of race, color, religion, sex, age, national origin, marital status, disability, or other protected status. All applicants must be U.S. citizens or lawful permanent residents Powered by JazzHR pIoDypAmPf

Job DescriptionAchieve more with Volt Volt is immediately hiring for a Manufacturing Engineer in Rochester, NY As a Manufacturing Engineer you will: The Manufacturing Engineer II operates with minimal supervision and is responsible for designing, implementing, and optimizing manufacturing processes within a single facility. This role supports the production of both new and existing products by improving efficiency, quality, cost, and safety. It may also involve planning assembly layouts, testing new systems, and managing capital projects, all while ensuring compliance with regulatory standards. • Plans and designs basic manufacturing processes, • Determines equipment and tooling needs, • Develops and implements efficiency, safety, and cost-focused projects, • May lead small teams, • Advises on design concepts and specifications, • Ensures processes meet regulatory standards, • Applies technical standards and principles, • Investigates and resolves quality issues, • Suggests corrective actions, • Performs other duties as assigned This is a full time, Direct Hire opportunity. The ideal candidate will have: • Bachelor’s Degree in Engineering or related field, • 2–5 years of relevant experience, • Proficient in applying engineering concepts to solution lines, • Strong analytical and problem-solving skills, • Experience with continuous improvement methods (e.g., pull systems, JIT, process mapping), • Working knowledge of:, • Data structures and database programming, • CAD/CAM and computer-aided manufacturing systems, • Standard business and data analysis software, • Engineering drawings and specifications, • Geometric dimensioning and tolerancing (GD&T), • Strong verbal and written communication skills, • Well-organized, detail-oriented, and able to multitask, • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Access, Outlook) Salary: $70,000-$80,000 *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description Insero Talent Solutions is recruiting a Senior Quality/Industrial Engineer for an electronics manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Responsible for documentation control and with analyzing, designing, and improving processes and systems to enhance efficiency and quality in electronics manufacturing operations. This role will also be responsible for manufacturing support and quality initiatives, including creating and maintaining product and component data within the SAP System, and change control for both production and R&D. SPECIFIC RESPONSIBILITIES: Responsible for site management of SAP master data such as the generation of part numbers, BOMs, and routings. • Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release for manufacturing., • Lead quality assurance initiatives to ensure compliance with industry standards and regulations., • Develop and maintain documentation of processes, standard operating procedures (SOPs), engineering/manufacturing changes and training materials in accordance with ISO 9001:2015 and industry standards., • Review and coordinate with Engineering, Sales, and Safety Agencies on product manuals and labeling, • Bachelor's degree in Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field., • Relevant certifications (e.g., Six Sigma, ASQ Certified Quality Engineer) would be beneficial., • Strong knowledge of general manufacturing, quality control, and lean principles., • Skilled in MS Word and Excel; experience with SAP preferred., • Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions., • Effective written and verbal communication.

Job Description Job purpose Individual will be responsible for producing, modifying and repairing tools used in the manufacturing process. Must have 10+ years of experience reading prints and using mills, lathe, surface grinders and other standard tool room machines to make parts to print. Must have good attention to detail and accustom to working and measuring to close tolerance and delicate parts. Responsible for maintaining work quality and doing in process inspection. Essential Duties • Assembling, fitting and repairing tools, • Following engineering drawings, including interpreting GD&T, • Using 2D and 3D computer aided design and manufacturing software (CAD/CAM), • Assisting with tool maintenance, • Teach basic machine operation to floor operators as required, • Give experienced input to tooling designs for better manufacturability, • Complete production operations requiring tool room machines, • Other tasks not listed here that arise from an ever-growing environment, • Other duties as assigned Key Responsibilities Responsibilities Measurement Make tools to engineer parts Parts measured to print Assemble and debug prototype tools Tools made for production put to use Readily assist production and engineer as required Tasks completed in a timely manor Minimum Qualifications • Education: High school diploma or GED/Technical Training Certificate/Equivalent experience., • Work experience: Journeyman Tool & Die Maker or equivalent with 5+ years of experience., • Ability to read engineering prints with high understanding of GD& T, • High competency using micrometers, indicators, calipers, etc., • Requires intermittent long periods of standing and/or walking, • Periodic lifting of materials not to exceed 40 pounds, • Willing to work beyond normal hours if needed, • Subject to stressful situations, • An understanding of both Metric and English measuring systems, • Ability to write and edit programs with understanding of cutting parameters, • Ability to use Manual Knee Mill, Manual Lathe, Grinder, Machine Tools, Inspection and measuring instruments such as micrometers, calipers, and indicators and power hand tools Physical Demands and Work Environment • Standard work week is Monday through Friday, hours to be consistent with business unit; some off hours work expected, • Generally working in Office with some activities in production environment., • Repetitive motion, • Some day or overnight travel domestically could be required.

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Job Summary: The Sr Manufacturing Engineer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to optimize cycle times, improve yields, increase machine efficiencies, and introduce new products into the factory. They will also support the manufacturing operations to deliver quality products on-time to customers. Essential Duties and Responsibilities: • Process development, machine programming, and prototype development work., • Provide technical support to machinists and operators to ensure smooth production runs., • Troubleshooting of equipment issues and resolution of problems related to tooling, setup, and machine performance., • Use CAD and CAM software to create part models, toolpaths, and detailed machining instructions for CNC machines., • Consulting with Chief Manufacturing Engineer, Program Management, Quality, and Engineering regarding part quality requirements and to ensure that designs are manufacturable and meet tolerance requirements., • Consulting with customers and internal applications engineering regarding current projects and upcoming projects., • Participate in strategic improvement events focused on improving throughput, profit margins, and overall manufacturing efficiency., • Lead Quality improvement efforts for assigned work areas / programs., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to operate machinery and tools., • The employee may be required to lift up to 50 pounds occasionally., • The work environment includes exposure to noise from machinery and a variety of physical demands, including the use of precision instruments., • Protective equipment such as safety goggles, hearing protection and other safety equipment required to perform the job effectively and in a safe manor., • Bachelor’s of Engineering Degree from a four year college or >5 years related work experience., • Relevant certifications (i.e. MasterCam programming) are highly desired., • Hands-on experience with CNC machines, milling machines, lathes, grinders, and other precision machining equipment. Expertise with horizontal and vertical 5 axis milling as well as multi axis turning and mill turn is a must., • Experience using precision measurement instruments (e.g. micrometers, calipers, height gauges, CMM machines), • Solid knowledge of manufacturing quality control processes and standards., • Ability to work independently and in teams in a fast-paced, high-tech environment., • Excellent communication and interpersonal skills aligned with our Mission-Vision-Values., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) and other relevant software for managing production and performance metrics.

Job Description Title Quality Engineer Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis · Cleaning, inspection and evaluation of product to specifications and requirements · Lead and participate in internal audits · Functions as auditor escort during external audits · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers · Assess gage system status and adequacy · Make final decisions on product acceptability · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval · Perform / coordinate environmental, durability, reliability and other testing as needed · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages · Work with Supply Chain to improve and control RPO supply base · Issue, manage, validate and close CAPAs · Create, manage and participate in ECOs · Implement and manage RPO document control system · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required · Identifies and recommends improvement opportunities · Other duties as assigned You have: · Familiarity with QC inspection equipment and techniques · Computer skills, including Microsoft Office. Minitab preferred · Ability to interpret optical and mechanical drawings, standards and specifications. · Familiarity with ISO 9001, AS-9100, AS9102, MIL-STD-810, MIL-PRF-13830, ISO 10-110 and other standards preferred. · Familiarity with control of government property preferred · Ability to use test equipment such as thermal, salt and humidity chambers and other test equipment preferred. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, etc. · Ability to work well with people · Self-starter, capable of working with very little direction · Good oral and written communication skills · Good Multi-Tasking skills · Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management. · Ability to apply advanced mathematical concepts. · 5 years’ experience in quality, manufacturing, optical or engineering fields. · A.A.S. in Quality, Engineering, Technology or Business discipline · B.S. Preferred · ASQ Certifications favorable You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: · Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain) • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. · Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) · Generally works in a clean environment and works to maintain the environment as such. · Safety Glasses are required · May require area specific safety training • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program. · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans. · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance. · Balance: 11 paid holidays, generous paid vacation and sick time · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday 7am - 3:30pm

Job Description Javlyn Process Systems a member of Krones Process Group North America is seeking a skilled Electrical Controls Engineer to develop, design, and implement electrical and automation systems for liquid processing facilities. The ideal candidate will have a strong background in industrial control systems, electrical schematics, and process automation specific to fluid handling systems. Javlyn Process Systems is a process engineering and control system integration company employing degreed Computer, Electrical, Chemical, and Mechanical engineers. Our focus is on providing automated process system solutions for the food, beverage, dairy, and pharmaceutical industries. We fulfill a niche within these industries by offering custom solutions and professional services to design and operate manufacturing facilities under optimal conditions. We are a subsidiary of Krones AG, an international firm with over 20,000 employees worldwide. Key Responsibilities: • Electrical Design & Documentation, • Develop detailed electrical design packages including control panel layouts, wiring, • diagrams/schematics and I/O lists., • Develop Motor Control Center designs and layouts., • Select and specify electrical components (PLC I/O, Safety Equipment, VFDs, Enclosures,, • etc.) suitable for liquid processing environments., • Ensure compliance with industry standards., • Process Integration, • Collaborate with process engineers to integrate control systems with pumps, valves and field instrumentation that measure temperatures, flows, pressures, levels, etc., • Project Execution & Support, • Participate in cost estimating., • Lead electrical checkout efforts at control panel fabrication shops., • 5 to 15 years of experience in electrical and automation design, preferably in the liquid processing industry (e.g., dairy, food, brewing, chemical, etc)., • Experience designing control systems with PLC’s, • Proficiency with AutoCAD and/or AutoCAD Electrical., • Proficiency with Microsoft Word and Excel., • Knowledge of applicable electrical codes and standards., • Degree or diploma in Electrical Engineering, Automation, or related field., • Familiarity with process instrumentation., • Combination of office-based design work and field/site visits. Travel (20-25%) throughout the U.S. is required. The amount of travel varies based on project assignments, project location, and level of responsibility.

Job Description PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Quality Engineer Your Role: Under the direction of the Quality Director, you will assist in elevating and systematizing engineering and manufacturing processes. Daily activities will require you to proactively identify potential issues to mitigate risk, improve product quality, manage industry and regulatory compliance and assist in delivering corporate strategic initiatives. Responsibilities Include: • Analyzes quality performance data and metrics to identify and drive improvement opportunities. Actively promote and participate in a cross-functional teamwork environment. * Facilitate and promote the use of appropriate problem-solving techniques for effective root cause analysis and successful corrective action for customer complaints and internal nonconformances. * Understand and promote overall compliance with AS9100/ISO9001 and 13485 specifications as they relate to product conformance and contractual requirements. * Understanding of inspection methodologies used to determine compliance for machined and assembled products. * Manage, conduct, and support internal and external audits, publishing findings and recommendations. * Lead in the implementation of assurances, process controls, and corrective and preventative actions (CAPA) related systems designed to meet or exceed internal and external requirements. * Drives continuous improvement and prevention of future failures by helping facilitate the implementation of corrective action. * May be accountable for projects/ programs and developing methods and parameters, project methodology, and/ or project proposals. * Demonstrate a productive work ethic and commitment to quality that sets the standard for PEKO Standards. Basic Qualifications: * Associate degree in Engineering or equivalent. * 2+ years of quality control experience in a manufacturing environment * 4+ years of experience utilization of Quality Management Systems (QMS) * 4+ years of creating and/or managing Design History Files (DHF) and Device Master Records (DMR). * Knowledge of ISO 13485 and AS9100; ability to establish quality protocols and procedures that align with requirements. Preferred Qualifications: * Bachelor’s degree in engineering or equivalent * Strong communication, negotiation, team moderation skills, and ability to manage time and workload constraints. * Good understanding of QA methodologies, tools, and processes. * Knowledge in the application of quality methods and problem-solving tools (TQM, Six Sigma, 8D, 5-Why, Lean Manufacturing, or other continuous improvement methodologies). Work Authorization: US Persons PEKO Perks: * Competitive Compensation * Tuition Reimbursement (IRS Allowable pre-tax Max) * 401K, Medical, Dental, Vision * Flexible Spending & Health Savings Accounts * Life, Short and Long-Term Disability * Recognition Awards & Discretionary Benefits Our Core Values: * We care about our talented and loyal PEKO family. * We are committed to providing a safe, clean, and positive workplace. * We believe in transparency, honesty, and respect for all stakeholders. * We are dedicated to maintaining an agile and financially prudent organization. * We foster the belief that PEKO people are resilient problem-solvers impacting the future. * Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: * This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice A reasonable estimate of the compensation range for this position is $60,000 - $89,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.. Powered by JazzHR 0pm10NwpBM

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job DescriptionJob Summary Vanteon is seeking applicants for senior-level hardware roles, including as Principal Hardware Engineer and Senior Principal Hardware Engineer. The specific level will be dependent on the applicant's level of experience. In general, this role is responsible for planning the architecture and development of high-speed hardware design. Experience with RF design is a plus. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Board-level high-speed digital design and schematic capture, • Digital system architecture development & partitioning, • Analyze systems for developing System Requirement Specifications, • Develop detailed designs and technical documentation, • Provide training and mentoring to junior level engineers, • Provide project estimates and technical support for the Sales Process, • Collaborate with other engineers in design and integration efforts.Required Specialized Skills/Knowledge, • Understanding high-speed PCB design and EMC compliance issues, • Design for Testability and Manufacturing, • System and Timing Analysis, • Extensive experience with Altium Designer, • FPGA design experience (100K+ Gates), • Expertise in digital systems, • Experience designing with Bluetooth, USB, Ethernet, Wi-Fi and flash memory, • Excellent analytical and communication skills, • Project leadership skills, • Highly motivated, well-organized self-starterEducation and Experience, • Bachelor of Science in Electrical Engineering (MS Preferred), • 10 years of hardware design experienceOther Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Please note that all offers for hire are contingent on passing e-verify, background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Position is eligible for a variety of bonuses including client referrals, employee referral, publications, and extra effort. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job Description We are seeking a hands-on and technically driven Quality Engineer to support and strengthen our Quality and Engineering team within a precision CNC machining environment serving the aerospace and defense industries. This role requires strong analytical and problem-solving skills, a proactive floor presence, and the ability to bridge theoretical quality principles with real-time production support. The successful candidate will play a key role in driving continuous improvement, ensuring compliance with industry standards (AS9100, ISO9001, NADCAP), and mentoring quality personnel. Key Responsibilities: • Maintain a strong presence on the production floor to support real-time resolution of quality issues., • Guide operators through inspection procedures and troubleshooting quality concerns on the spot., • Conduct and support various inspection types, including:, • First-Piece, In-Process, Final, and Open Plate Inspections, • Source Inspections and First Article Inspections (FAI), • Oversee CMM operations and programming using Zeiss Calypso (required)., • Utilize precision measuring tools (micrometers, calipers, height gauges, comparators) to validate dimensional tolerances, finishes, and part conformity per GD&T., • Lead and document non-conformances (NCR/INCR), perform root cause analyses (RCA) using tools like 5 Whys, Fishbone Diagrams, FMEA, and develop CAPAs., • Assist with preparing and maintaining PPAP, FAIR, and other aerospace quality documentation., • Audit and ensure adherence to company procedures, quality systems, and regulatory compliance., • Support process control development and collaborate with operations to improve quality at the source., • Specify and order inspection gauges and oversee calibration and gauge control requirements., • Create user-friendly visual aids and inspection documentation for operator use., • Education:, • Bachelor’s degree in engineering, manufacturing, or related field with 3–6 years of quality engineering experience, • OR associate degree with 5+ years of progressive quality experience and strong understanding of quality principles. (Must Have)Required Technical Skills & Experience: * • Expertise in AS9100 (or AS9100D), aerospace quality compliance standards, is required, NADCAP is preferred, and ISO 9001 compliance is required., • Prior experience in aerospace precision CNC machining environments, required., • Proficiency in GD&T interpretation and aerospace blueprint reading, required., • Zeiss Calypso CMM programming experience (required), • Experience with ERP/MRP systems (Epicor preferred), • Familiarity with CAD/CAM models and software like Mastercam or PartMaker, required., • Experience conducting and documenting First Article Inspections (FAI), PPAP, and FAIR, required.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description TekPro is partnered with a premier contract machining company in the Rochester, NY area in their search for a Manufacturing Engineer! This position is focused on MasterCAM programming, tooling/fixture design, and process engineering for complex parts in the aerospace, defense, and medical industries. This position typically offers high hourly pay and lots of overtime for tremendous earning potential, but can be flexible for a salaried job offer as well. Position Summary Responsible for developing and optimizing manufacturing processes. Analyze products and methods to innovate both new and existing operations. Drive enhancements that reduce cycle times, elevate product quality, and generate significant cost savings. Duties and Responsibilities: • Ensure product stability and support manufacturing by designing robust process capabilities, establishing standards, and continually improving the manufacturing process., • Optimize & innovate manufacturing, production process, machine operations and overall performance.  Collaborate with management, manufacturing & other departments to troubleshoot production needs., • Upgrade systems and processes with new technology., • Meet customer deadlines on quotes., • BS degree in Engineering or commensurate work experience, • Previous experience as a manufacturing engineer or similar role preferred., • Proficient in CAD/CAM software (SolidWorks, Mastercam, Part Maker)., • Familiarity with manufacturing equipment and quality assurance techniques (CNC equipped)., • Proficient in Microsoft Office and ERP systems., • Strong project management, problem-solving, and multitasking abilities., • Continuous commitment to health and safety standards., • GD&T, • CNC Tooling, • CNC Programming, • Design for Manufacturability (DFM), • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC), • CNC Lathe (2-4 axis), • CAM Software (Mastercam), • CNC Mill (5+ axis VMC)

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: COE SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer’s absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Providing detail drawings., • Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment., • Well versed in PLC and HMI programming., • Well versed in digital and analog AC/DC drive design, programming and installation., • Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software., • Manage new equipment installations and startups., • Design, install and startup equipment modifications., • Negotiate price and purchase equipment and services as needed., • Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items., • Fill out project item listings., • Provide managerial input to the maintenance department as well as outside contractors., • A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR., • Responsible for working safely and being a safety leader. Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm’s Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. The employee must occasionally lift and/or move more than 100 pounds. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description Insero Talent Solutions is recruiting a Senior Magnetics Design Engineer for a manufacturing company in Rochester, NY. Job Summary: A leading designer and manufacturer of high- reliability passive components and precision subsystems is seeking an experienced Senior Magnetics Design Engineer to join our Magnetics Design Center Team. In this role, you will develop electrical designs and mechanical configurations for custom transformers, inductors, filters, and other magnetic components. Your responsibilities will include contributing to the design and specification of custom tooling, assembly fixtures, inspection fixtures, BOMs, and process instructions. As a Senior Magnetics Design Engineer, you will leverage your expertise to enhance the company's competitive edge in quotations, new product developments, and successful production, while also engaging in the trial and verification of new technologies. Responsibilities: • Translate customer magnetics requirements into success criteria and specifications for components and processes., • Develop and leverage computer aided modeling and simulation methods for design trade-off analyses, including finite element analyses., • Communicate effectively with customers, suppliers, and team members to support collaborative new product development., • Analyze experimental results from designs of models and prototypes to recommend improvements and cost reduction strategies., • Monitor external technology developments related to power electronics and magnetics design tools and advise management on opportunities and risks., • Participate in daily team huddles to review project statuses and collaborate on overcoming, • Develop milestone plans and deadlines for project completion, ensuring accountability and timely updates on progress., • Establish initial concepts of magnetics solutions in quotations and prototypes, with related manufacturing processes including provision for custom tooling and new special machines, while working with suppliers to create cost-effective designs., • Propose improvements during production to reduce labor time and enhance safety and process, • Develop control plans and test circuits for new magnetics products including custom electrical testing involving sinusoidal, resonant, and non-sinusoidal methods to simulate waveforms and amplitudes of application in measuring dissipation, partial discharge or other selected parameters., • Participate in problem solving sessions involving DFMEA, PFMEA, HALT and PPAP (including MSA & PCP for target factories)., • Support assigned projects, guiding design reviews from prototype through First Article to production, including lifecycle product change control. Collaborate with the Design Center Tiger Team to understand and enhance manufacturing processes for magnetic components, addressing any roadblocks., • Provide technical support to factories by resolving production issues related to manufacturing processes, materials, and inspection., • Attend weekly training sessions on configuration control, drawing requirements, supplier management, and related engineering processes. Qualifications: • BS degree in Electrical Engineering., • 5-10 years of experience in designing custom passive magnetic components for demanding power electronics applications and a demonstrated record of successful results., • Passion for continued professional development in magnetics design methods, materials and, • Proficient in Ansys, Comsol, SolidWorks, and electrical circuit simulation tools (e.g., PSPICE,, • Matlab-Simulink)., • Strong organizational and communication skills to collaborate effectively with global colleagues and suppliers., • Ability to coordinate multiple projects and manage time and resources efficiently., • Must meet eligibility requirements for access to export-controlled data.

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Company Overview Röchling Medical Rochester is a leader in the medical device manufacturing sector, part of The Röchling Group. With a strong focus on contract manufacturing, product design, and mold making, we deliver high-quality surgical, laboratory, and diagnostic devices through precise engineering and robust program management. Job Summary: The Quality Engineer/Supplier QE is responsible for ensuring that products and processes meet established quality standards by identifying shortfalls, developing corrective measures, and implementing quality control systems, acceptance sampling, validations of injection molded, medical device and purchased components used in validated processes. Essential Duties/Responsibilities: • Support Engineering Development and Validation activities., • IQ, OQ, PQ Submissions, • Document IQ, OQ, PQ Protocols, • Document IQ, OQ, PQ Submissions, • Develop PPAP Qualification Documentation per customer PPAP Requirements., • Develop Control Plans, • Develop PFMEA, • Develop Process Flow, • Perform Data Analysis using Minitab, • Capability Analysis, • ANOVA Studies, • Measurement System Analysis (MSA), • Using Problem Solving & Root-cause Analysis Tools:, • 5-why Analysis, • Fishbone Analysis, • Scheduling Brainstorm sessions, • Documenting Continuous Improvement Activities, • Internal Auditor, • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Strong analytical and problem-solving skills., • Strong leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Ability to function well in a high-paced and at times stressful environment., • Proficient with Microsoft Office Suite and Minitab software., • Proficient print reading skills Education and Experience: BS degree preferred. At least 5 years’ related experience required. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at times. Visual acuity for inspections, color differentiation, reading electronic documentation. Work Environment: Manufacturing environment requiring appropriate eye protection. Exposure to high noise level in the work environment requiring hearing protection. Gowning and sanitation for manufacturing in a clean room, as applicable. Roechling Medical Rochester is an Equal Opportunity Employer. RMR does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Job Type: Full-time Pay: $75,000.00 - $95,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Compensation Package: • 8 hour shift, • Rochester, NY 14615 (Preferred) If you are ready to make a significant impact in the medical device industry with your engineering expertise, we invite you to apply today to join our innovative team at Röchling Medical!

Participate in targeting strategic processes and skills, and participate in implementing processes, procedures, and training to accomplish those skills. Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements. Assists with preparation of accurate cost anal

Job Description Christa Construction – Customer Satisfaction through Quality, Service, and Value!! Christa promotes an environment of professional development and creative thinking that demonstrates our commitment to hiring and retaining the best people in the industry. Our team comes first, it’s known through our multiple awards such as Greater Rochester Chamber Top 100 Companies and Rochester’s Top Workplaces. As an employer, we’re focused on your growth in the company. From leadership development programs, state-of-the-art technology and an open-door policy to learn from each other, you own your personal growth and impact in the company as well as your career. We thrive on our outstanding client service and expertise. We are trying to ensure we are bringing the right kind of individual to join our team. • Does your work ethic typically outshine the ones around you?, • Do you know that you have the skills to impress, and the drive to deliver the highest quality in every situation?, • Is your history bursting with examples of your personal and professional success?, • Are you ready to catapult your career alongside the top professionals in the business?, • Are you the next best thing to happen to Christa? Let’s chat and see! Core Values: Christa’s Core Values inform our decisions and actions at all levels. They serve as ‘guard rails’ for behavior between employees, clients, subcontractors, suppliers, and other stakeholders. Communicating Christa’s Core Values and ensuring everyone internalizes them is essential to fostering and maintaining our amazing culture. Christa cares about: • Integrity: Clients, suppliers, employees, and communities we serve know we build with integrity., • Safety: We prioritize safety every day, on every job site., • Ownership mindset: We are responsible for our actions and accountable for results. Treat every project like it is your own., • Quality: We build every project with quality, exceptional service, & innovative construction methods., • Communication: We understand clients’ expectations, then deliver with clarity and transparency to the entire project team., • Balance: We are committed to hard work, balanced with creating time for family, friends, and fun. How will working for Christa benefit you? Not only will you be a part of a wonderful team of industry-leading professionals, but Christa offers great benefits including: Health Dental and Vision, generous 401K matching, PTO, Life & LTD, Tuition Reimbursement, Career Training and Development support, Valuable experience, and more! A successful Project Manager at Christa will provide project leadership while promoting Customer Satisfaction through quality, service and value. ESSENTIAL FUNCTIONS: • Supervises and directs the overall project. Duties include planning and coordinating activities with others; circumventing/resolving problem areas; and ensuring all company/project policies, procedures, and standards are maintained., • Achieves customer satisfaction by meeting or exceeding customer expectations. Customers include owners, architects, contractors, subcontractors, vendors, and employees., • Manages, directs, organizes, coordinates, and schedules the work of staff in their respective corporate divisions, • Ensures that projects are being managed effectively and are effectively operated, • Is responsible for the profitability of assigned projects and the completion of work per schedule and utilizes corporate standard operating procedures to accomplish this goal, • Solicits, purchases, writes, and manages contracts, contractors, and vendors in the execution of work, • Responsible for developing the financial schedule of values inclusive to the overall project budget., • Prepares and distributes payment applications on a monthly basis, • Tracks all project costs and prepares monthly cost to complete reports, • Cost codes all project invoices, • Solicits, procures, and manages the labor, material, and equipment necessary to execute the work of several projects, • Actively participates in the solicitation and procurement of new and future employees, • Ensures that standard administrative operating procedures are being complied with, • Creates, updates, and monitors construction schedules using Microsoft Project and adheres to company scheduling standards and practices, • Creates and submits all project RFIs and submittals, • Prepares and distributes all project meeting minutes, • Manages and maintains all changes to projects by posting drawings, updating Project Sight and creating as-built drawings, • Manages the closeout process at the end of projects to submit to appropriate parties, • Trains, mentors, and motivates the Assistant Project Manager and/or Project Engineer assigned to their projects QUALIFICATIONS & RESPONSIBILITIES: Top candidates will have 5-10 or more years of commercial construction project management experience (preferably in wood frame multi-family projects) and should be able to lead multiple projects. They will also take ownership of the project success with special consideration to schedule and budget adherence, and have the personal attributes to manage, direct, mentor and support employees through their daily work while demonstrating Christa’s corporate philosophy of outstanding business ethics and principles. Top candidates will also have advanced skills in the use of technology including MS Office products, PROCOR, and P6/Oracle. Advances skills in comparable programs will be considered equivalent. Project Managers typically have a range of physical requirements, including: • Mobility: Ability to move around job sites, which may involve climbing stairs, ladders, or scaffolding., • Stamina: Capability to work long hours, often on-site, which can include standing for extended periods and walking significant distances., • Vision: Good eyesight for reading blueprints, plans, and safety signage, as well as inspecting work., • Hearing: Ability to hear instructions, warnings, and safety alerts in a noisy construction environment., • Manual Dexterity: While not as hands-on as other roles, project managers may need to use tools or equipment occasionally, so basic manual skills can be beneficial., • Strength: While not always required, some physical strength may be necessary for tasks like lifting or carrying equipment, especially during site visits., • Coordination: Good hand-eye coordination is useful for tasks that require writing, reviewing plans, or interacting with technology., • Safety Awareness: Understanding and adhering to safety protocols is crucial, as construction sites can pose various hazards. Compensation for qualified candidates is determined by multiple factors including but not limited to verifiable experience, education, and technical skills. The pay range for this position is: $55-$100k annually Nestled on the shores of Lake Ontario, Rochester, is a vibrant city known for its rich history, dynamic economy, and diverse cultural scene. With a legacy of innovation and a strong sense of community, Rochester is the perfect place to live, work, and explore. The city boasts a history of groundbreaking achievements in technology and industry. As the headquarters for several major companies, Rochester continues to thrive as a center for innovation, research, and development. Rochester’s diverse economy includes strong sectors in healthcare, education, manufacturing, and technology. The region offers numerous opportunities for businesses and entrepreneurs, supported by a collaborative environment and a skilled workforce. You can also experience the arts and culture of Rochester through its world-class museums, theaters, and music venues. The George Eastman Museum, Rochester Philharmonic Orchestra, and the Strong National Museum of Play are just a few highlights of what is offered. Rochester is also home to an array of parks and outdoor spaces, including the scenic Highland Park and the picturesque Genesee Riverway Trail. Enjoy outdoor activities, festivals, and seasonal events throughout the year. Finally, Rochester is renowned for its high-quality educational institutions. These institutions drive research, innovation, and a culture of learning. Company DescriptionAffordable housing and apartmentsAffordable housing and apartments

Responsibilities Generate preliminary and final design documentation for highway construction and rehabilitation initiatives Engineer roadway components including geometric alignment, earthwork grading, stormwater management systems, and traffic control elements Supervise technical work of engineeri

The Assistant Project manager is accountable for ensuring that customer service is delivered by hiring, training, supervising and coordinating employees engaged in cleaning and maintaining facilities in his/her assigned account(s) in accordance with contract specifications.Assign duties and tasks to

RESPONSIBILITIES Execute structural design and load analysis for bridge projects and foundation systems Develop technical drawings, specifications, engineering reports, and project cost assessments Oversee construction activities through site inspections, contractor coordination, and design clarific

Manpower - JobID: 5737432 [Production Operator / Assembly Line Worker] As an Assembler at Manpower, you'll: Assemble products according to specifications; Inspect finished products for quality control; Operate machinery and tools to complete tasks; Follow safety protocols and guidelines at all times

Aerotek - JobID: JP-005578252 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Manpower - JobID: 5773517 [Production Operator / Assembly Line Worker] As an Assembler at Manpower, you'll: Assemble products according to specifications; Inspect finished products for quality control; Operate machinery and tools to complete tasks; Follow safety protocols and guidelines at all times

BS in Mechanical Engineering/Engineering Technology. Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection. Project Engineer-Mechanical_Rochester, NY_Full-Time (FTE)_Direct Hire.

Project Engineer, Bridge Design. If you are a team player with a passion to drive your career in Bridge Design, we are the place for you! We are seeking a Project Engineer to add to our growing and talented Transportation team. As a Project Engineer specializing in Bridge design, your role will incl

Project Manager For Fairport Expansion.Duration: 9 months contract with possible extension.Job Description: We are seeking a highly organized and proactive Project Manager to support the final stages of equipment acceptance for Phases 3 and 4 of the Fairport Expansion.This role will work closely wit

Experience in multiple IT disciplines including infrastructure/data center, application development, or business process improvement projects.

Come work for Diversified Maintenance, a leading company in the Facilities Services Industry since 1973.At Diversified Maintenance we believe that details matter, as do each of our employees and customers.Through our core values of loyalty, honesty, and integrity, we strive to create a culture of gr

Partner with ownership and management to improve processes, achieve KPIs, and strengthen team culture. Drive membership growth through our proven Elements Wellness Program sales process.

Focus on the core content of the job post, removing all extra metadata and navigation elements.The job title and description are presented in a clean and beautiful format.

Job Opportunity At The University Of Rochester.As a community, the University of Rochester is defined by a deep commitment to Meliora - Ever Better.Embedded in that ideal are the values we share: equity, leadership, integrity, openness, respect, and accountability.Together, we will set the highest s

Support early integration of safety into the design process. Professional Engineering licenses is optional. AtkinsRéalis is one of the world's most respected design, engineering, and project management consultancies.

Utilize engineering knowledge and expertise to oversee the integration of various engineering systems and automation technologies. The Automation Project Manager has accountability for leading efforts in the planning and delivery of large, complex, or multi-location capital projects including, but n

Communicate manufacturing strategies so that they may provide guidance and support to manufacturing, thus ensuring quality processes and products. Partner with R&D, Quality Assurance, Engineering, and Supply Chain to support new product introductions, process validations, and troubleshooting. Bachel

As a community, the University of Rochester is defined by a deep commitment to Meliora - Ever Better.Embedded in that ideal are the values we share: equity, leadership, integrity, openness, respect, and accountability.Together, we will set the highest standards for how we treat each other to ensure

Communicate manufacturing strategies so that they may provide guidance and support to manufacturing, thus ensuring quality processes and products. Partner with R&D, Quality Assurance, Engineering, and Supply Chain to support new product introductions, process validations, and troubleshooting. Must h