Trabajos master control en Los Angeles, California - Page 2Crear alertas

Job Description Location: Torrance Job Summary: The Sanitation Manager leads, trains, and manages the sanitation staff to ensure the facility meets regulatory (FDA/USDA) and food safety standards (SQF/GFSI). They develop and implement master sanitation schedules (MSS), Sanitation Standard Operating Procedures (SSOPs), and manage chemical inventory and pest control, while ensuring all cleaning is completed before production. Responsible for plant sanitation and environment Key Responsibilities • Oversee daily wet/dry cleaning, equipment tear-down/assembly, and allergen changovers., • Ensure compliance with Food Safety Plans (FSMA), SQF, FDA, and USDA regulations, conduct environmental monitoring and pre-op inspections., • Train, schedule, and supervise sanitation staff; ensure compliance with safety protocols (e.g., LOTO, PPE)., • Maintain the Master Sanitation Schedule (MSS), SSOPs, and Safety Data Sheet (SDS) documentation., • Manage chemical inventory, usage, and safety compliance., • Identify sanitation risks, perform root cause investigations, and implement corrective actions., • Conducting effective, risk-based sanitation audits to identify gaps and improvement opportunities to ensure food safety and compliance with applicable regulatory requirements, company policies/procedures, and customer expectations., • Monitor and verify equipment cleaning methods, including recommendations to meet plant sanitation., • Interact daily with Quality Assurance and Production on sanitation activities and performance., • Evaluate and develop Sanitation Standard Operating Procedures (SSOP), • Development of the company training program as it pertains to the sanitation of the facility., • Manage the cleanliness of the facility, equipment, and grounds., • Executes and addresses sanitation requirements using Master Cleaning Schedules (MCS) and Sanitation Standard Operating Procedures (SSOP)., • Manage pre-op check sheets for all areas of the facility that include trending issues found., • Support floor sanitation team members, including scheduling of team members., • Conduct daily post-sanitation performance inspections to ensure the quality of work is being performed., • Develops, orders, and maintains chemical inventories and supplies., • Keep and maintain reports or statistical data as needed., • All employees are required to immediately report and assist in the elimination or control of any food safety issues they observe to their supervisor., • Monitors and enforces cGMPs within the Sanitation department., • 5+ years in food manufacturing sanitation, with experience in a managerial role., • Strong understanding of sanitation techniques, chemicals, and food safety standards (GFSI/SQF)., • Strong leadership, organizational, and communication skills; proficiency in computer systems for documentation., • Bachelor’s degree in food science, Microbiology, or related field preferred, or a combination of experience and education., • Bi-Lingual English/Spanish highly desirable, • Push/pull 10-100 pounds approximately 10-50 feet., • frequent lifting between 10 and 50 pounds of supplies and trash with the aid of co-workers., • This work requires working in cold, wet, and noisy environments. Supervisor: Q.A Manager Pay range: $70,400 - $80,000 FLSA Status: Exempt Benefits: • Health insurance, • Dental, • Life insurance, • Paid time off, • Vision insurance, • Retirement Saving Plan

OK International is a global manufacturer of electronic benchtop tools and precision dispensing solutions worldwide. We have two major product lines: Metcal electronics bench tool solutions and Techcon dispensing Systems. We have facilities in Cypress California (US), Chandlers Ford (UK) and Shenzhen (China) supporting our customers worldwide. The OK International Team is dedicated at putting customers first, having an entrepreneurship mindset, innovative culture, cultivating relationships and never compromising on integrity. Welcome to our team! OK International is part of the Dover Engineered Products segment of the Dover Corporation. Dover is a diversified global manufacturer with annual revenue of over $7 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." JOB SUMMARY: The Quality Assurance Manager leads the Quality Management System, leads quality improvement efforts based on customer feedback, manages supplier quality, supports new product introductions, manufacturing, and continuous improvement initiatives. This role collaborates with cross-functional and global teams to drive operational excellence and supports the OKI Shenzhen, China operation and product lines JOB DUTIES • In charge of managing the Quality Management System with the goal of achieving its targets as specified in the established quality policy & objectives., • Ensure Quality Management System compliance to applicable standards., • Propose and Implement process changes to improve efficiency, productivity and overall effectiveness of Products, • Plan short-range and long-range action-steps to carry out goals to meet targets., • Assign/delegate jobs to subordinates., • Train Q.E. subordinates., • Conduct performance evaluations of subordinates., • Leads internal audits and 3rd party audits for the Quality Management System., • Oversee Technical Service Manager., • Develop and initiate standards and methods for inspection, testing, and evaluation utilizing knowledge in engineering fields such as electrical and mechanical., • Determine critical dimensions and devise control plans, sampling plan and procedures., • Design and develop forms and instructions for recording, evaluating, and reporting quality and reliability data., • Evaluate and participate in design of products according to specifications and quality standards in accordance with the Product Development Process (PDP)., • Evaluate existing and potential supplier systems and processes., • Drive the Quality department to meeting established goals for warranty, scrap, and FPY., • Participate in the Design Control Process, review design inputs (specifications) and design outputs (reports, prints, etc.) to assure that appropriate design requirements are specified and to evaluate/confirm quality requirements prior to successful design transfer., • Review, approve and develop (as needed) product verification plans, validations and respective test methods through the development of a protocol and Final Reports., • Participate in Engineering Change Notification (ECN) process to review and approve engineering change requests., • Manage Material Review Board (MRB) to review and disposition nonconformities and to work with Supplier Quality Engineering to coordinate supplier corrective actions., • Work with Manufacturing to coordinate, and monitor production processes to ensure compliance to applicable regulatory requirements, to ensure that safe and effective products are produced and to identify continuous improvement opportunities., • Support manufacturing readiness for new product launch buy designing assembly process & required custom tooling., • Ensure that assembly cycle times meet required goals., • Provide validation qualification support by applying manufacturing quality tools including, but not limited to: FMEA, control plans, process verification/validation plans, protocol and final report development, Cpk, SPC, DOE and process data analysis., • Ensure that all documentation is provided to establish compliant product and process qualifications., • Monitor performance aspects by gathering relevant data and producing statistical reports., • Participate in complaint investigations, failure analysis of returned products, and issues resulting in a stop ship/stop production; document findings, provide reports and analysis, & document health risk assessment., • Liaise with Customer Support group and ensure the execution of Compliance actions in support of regulatory requirements., • Routine management and execution of the Custom Product process., • Performs other duties as assigned.\nWORK EXPERIENCE REQUIREMENTS, • 8+ years of quality assurance management experience directly related experience in electro-mechanical assembly and component design. Strong manufacturing and Lean Principle background. Effective verbal and written communication skills.\nSKILLS REQUIRED, • Bilingual, English & Mandarin highly desirable, • Must have strong problem solving and time management skills., • Results-oriented work ethic., • High energy and the ability to multi-task across projects., • Must be able to understand the product as a system as it encompasses mechanical, electrical, and software integration., • Must be familiar with general Quality Assurance practices and procedures., • Able to Read, analyze, and interpret technical procedures and governmental regulations., • Write technical reports, business correspondence, technical procedures, as well as, administrative procedures., • Must be able to determine and develop an approach to a wide range of issues and problems. Solutions must be thorough, practical, and consistent with organization objectives., • Must be familiar with sampling plans and techniques., • Inspection plan creation., • Proficient using SolidWorks software, • Knowledge of drawing and schematic interpretation, product models, geometric dimensioning and tolerance establishment., • Knowledge of injection molding process., • PCBA, wire harness, electro-mechanical, machining, casting and sheet metal fabrication, assembly and inspection process knowledge., • Lead the Quality Assurance team which includes the Technical Service team & Technical Services Manager., • Experienced in use of statistical tools and techniques for quality management., • ISO 9001-2015 Quality Management System., • Office tools and equipment including Microsoft Office and ERP systems., • Strong written and oral communications skills with ability to interface with all levels. Pay Range: $100,000.00 - $120,000.00 annually We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 10 paid holidays per calendar year, paid vacation days beginning at 120 hours annually, 40 paid sick leave hours annually or as provided under state and local paid sick leave laws, business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Job Function : Quality & Continous Improvement Job Segment: Quality Assurance, QA, Testing, Quality Manager, Inspector, Technology, Quality

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off The R&D Associate performs various project duties supporting the product development of a contract manufacture of Nutraceuticals and Dietary Supplements. This includes FPS process, formulation, bill of materials database maintenance, and record retention SOPs and new product process. DUTIES & RESPONSIBILITIES: The following responsibilities would characterize the requirements of this position. Must possess the skills necessary to perform the majority of the listed functions: 1. Interpret customers explanations, descriptions and requests and convert them to the chemical components and formula combinations, 2. Meet with suppliers and technical experts for product information collecting newest developments and formulating appropriate applications., 3. Assemble chemicals and materials into laboratory batches and test formula for efficacy/performance, 4. Modify, substitute, and reformulate materials to meet highest level of customer expectations, and quality while maintaining lowest formulation costs, 5. Evaluate alternate chemical suppliers, 6. Enter and review formulas in computer system, 7. Trouble shoot formula issues related to manufacturing/compounding, 8. Revise priorities keeping all deadlines under control according to production demands, customer needs and company interests., 9. Maintain professional expertise through individual study, continuing education and professional development, 10. Must communicate progress, problems and needs with management, vendors, customers as appropriate, 11. Assist with managing the product development process from the concept phase to the post-launch analysis phase, 12. Involvement in new product concept brainstorming meetings, 13. Primary liaison with overseas vendors for Product Development from artwork to product specifications, sculpting, and sample approval, 14. Negotiate pricing with oversees vendors, 15. Set up item number and other development information in item master while updating and maintaining it, 16. Ensure the accuracy of product and packaging samples and seek approvals, 17. Guarantees deadlines are met to obtain samples for tradeshows & licensor, 18. Initiates collateral requests within the Creative Department and/or with outside service vendors, 19. Works with Quality Compliance department regarding compliance issues REQUIREMENTS: Competencies 1. M.S or B.S. degree in Chemistry, Biology, Food Science or other physical science, 2. 2-3 years experience in formulation of new and innovative personal care products, preferably in a contract manufacturing environment, 3. Ability to multitask handling 4-5 bench projects at a time, 4. Ability to thrive within a team environment, 5. Working knowledge of claim substantiation, 6. Current knowledge of ingredient technology and familiar with working within customer and international, 7. Extensive knowledge of laboratory procedures, test instrumentation, and experimental design, 8. Advance writing, reading, and math skills including statistical analysis, 9. Ability to interpret, analyze, reason, and plan

Key Responsibilities \n • Assemble Product by referring to the Engineering Drawings The assembler will refer to Bill of Material's, sales / assembly drawings, and master comments from the QAD system and correctly interpret them. Assembler will evaluate product for correct performance and visual characteristics.\n, • Correctly interpret production documentation which includes work instructions, assembly processes and test procedures. Input test results into the First Pass Yield database and accurately complete First Article Inspection.\n, • Work as part of a team to achieve departmental goals. Should be able to meet the hourly targets set for the assigned area. Must attend daily morning huddles and All Hands Meetings, Update work station KPI\n, • Maintain work area in accordance with Safety policies and 5S principles. Apply continuous improvement techniques to the work area. Should adhere to PPE policies.\n, • Follow quality control checks to ensure products meets standards and report safety incidents and quality issues on the floor.\n\n Professional Experience/ Qualifications \n • Must pass a basic Math and English test with 75% accuracy and dexterity test\n, • Must be a high school graduate or equivalent/GED, and ability to read and write English.\n, • Ability to read blueprints, use pneumatic and basic hand tools\n, • Ability to meet consistent attendance\n\n\n, • Must be a quick learner and be able to follow procedures and written documentation to build product\n, • Willing to learn and complete audits on 5S, kanban, and participate in continuous improvement activities\n, • Must be able to sit or stand for long periods of time. Position demands some repetitive motion tasks (pushing/pulling and gripping)\n, • Ability to lift up to 35 lbs. \n\n, • Computer usage to the point of data input. \n $20.80-$24.92 This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Key Responsibilities \n • Assemble Product by referring to the Engineering Drawings The assembler will refer to Bill of Material's, sales / assembly drawings, and master comments from the QAD system and correctly interpret them. Assembler will evaluate product for correct performance and visual characteristics.\n, • Correctly interpret production documentation which includes work instructions, assembly processes and test procedures. Input test results into the First Pass Yield database and accurately complete First Article Inspection.\n, • Work as part of a team to achieve departmental goals. Should be able to meet the hourly targets set for the assigned area. Must attend daily morning huddles and All Hands Meetings, Update work station KPI\n, • Maintain work area in accordance with Safety policies and 5S principles. Apply continuous improvement techniques to the work area. Should adhere to PPE policies.\n, • Follow quality control checks to ensure products meets standards and report safety incidents and quality issues on the floor.\n\n Professional Experience/ Qualifications \n • Must pass a basic Math and English test with 75% accuracy and dexterity test\n, • Must be a high school graduate or equivalent/GED, and ability to read and write English.\n, • Ability to read blueprints, use pneumatic and basic hand tools\n, • Ability to meet consistent attendance\n\n\n, • Must be a quick learner and be able to follow procedures and written documentation to build product\n, • Willing to learn and complete audits on 5S, kanban, and participate in continuous improvement activities\n, • Must be able to sit or stand for long periods of time. Position demands some repetitive motion tasks (pushing/pulling and gripping)\n, • Ability to lift up to 35 lbs. \n\n This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Photo-Sonics, Inc. is an international leader in state-of-the art optical tracking systems in Chatsworth and has an immediate opening for a Senior Manufacturing Engineer. \n We are seeking an experienced Senior Manufacturing Engineer to join our Production Control team to support production scaling from prototype to low-volume full rate production for our optical tracking mount systems. Beyond scaling up production, this Manufacturing Engineer will focus on implementing manufacturing best practices and continuous improvement initiatives. This role is highly cross-functional and focuses on enabling predictable production flow, supporting schedule execution, and bridging engineering, materials, and shop floor operations - especially in a prototype-to-production environment. \n This position reports directly under Production Control leadership and is a critical role in translating engineering intent into executable manufacturing plans. \n Responsibilities include but not limited to: \n Production Support & Execution \n\n • Identify and implement industry manufacturing best practices to scale up production.\n, • Support production schedules by ensuring manufacturing processes, routings, and work instructions are production-ready.\n, • Act as a technical liaison between Production Control, Manufacturing, Quality, Supply Chain, and Engineering.\n, • Support daily production execution by resolving manufacturing issues that impact schedule, quality, or throughput.\n, • Participate in production meetings to assess risks, constraints, and mitigation actions.\n, • Support product design through project lifecycle, from initial concept design through systems analysis/engineering, planning and execution within program budget and timelines\n, • Coordinate design reviews to ensure designs meets customer requirements (functional and performance)\n, • Develop designs to meet high quality standard and ease of manufacturing, assembly and test\n, • Support outsourcing analysis and decisions\n, • Support system design, integration and test efforts \n, • Support product transition to Operations and sustaining efforts\n, • Develop, maintain, and improve manufacturing processes, routings, travelers, and work instructions.\n, • Ensure BOMs, routings, and manufacturing documentation align with ERP/MRP requirements.\n, • Support engineering change (ECNs) implementation with minimal disruption to production flow.\n, • Identify bottlenecks, inefficiencies, and process variation impacting delivery performance.\n, • Drive root cause analysis for schedule misses, rework, scrap, and labor overruns.\n, • Support lean initiatives focused on flow, cycle time reduction, and work-in-process control.\n, • Conduct defects analysis and implement processes to reduce and/or eliminate defects/reworks. \n, • Support first article builds, in-process inspections, and corrective action implementation.\n, • Ensure manufacturing processes comply with quality system requirements.\n, • Assist with supplier and internal process validation as needed.\n, • 10+ years of experience in manufacturing engineering or production-focused roles.\n, • Experience supporting production schedules in a high-mix, low-volume or prototype environment.\n, • Strong understanding of manufacturing documentation, routings, and ERP/MRP systems.\n, • Hands-on experience with mechanical and/or electro-mechanical assembly.\n, • Strong problem-solving skills with the ability to work across multiple teams.\n, • Experience working closely with Production Control, Master Scheduling, or Materials teams.\n, • Demonstrated ability and experience working with product development engineering teams.\n, • Experience supporting prototype builds transitioning into early production.\n, • Lean manufacturing or continuous improvement experience.\n, • \n· Ability to interact with all levels of personnel and to promote collaboration and timely completion of milestones.\n, • Support product design activities through all phases of projects, from initial concept design through systems analysis/engineering, project planning/execution and reviews \n, • Support designing both large and small high precision mechanical systems as part of an overall opto-electro-mechanical system.\n, • Support packaging electronics boards, harnessing, and COTS electronics components for applications in harsh environments and tight packaging constraints.\n, • Experience with imaging camera and lens optical system mechanical and system integration desired\n, • Familiarity with thermal analysis and heat transfer principals for electronics packaging\n, • Utilize SolidWorks for design and drafting and SolidWorks Simulation tools for system analysis.\n, • Demonstrated ability to develop and review component drawings utilizing GD&T, per ASME Y14.5, and assembly drawings and associated engineering drawings.\n, • Demonstrated ability to perform tolerance stack calculations.\n, • Familiarity of engineering change control processes (ECN’s), SolidWorks PDM \n, • Professional experience desired.\n, • Possess strong written and verbal business communication, excellent problem solving and organizational skills.\n, • Working knowledge of Military standards and compliance rules and regulations mandated under the following quality and governmental standards.\n, • Physical Requirements of this position requires ability to walk, sit, talk, see, stand, use hands, reach, some lifting.\n

Key Responsibilities \n • Assemble Product by referring to the Engineering Drawings The assembler will refer to Bill of Material's, sales / assembly drawings, and master comments from the QAD system and correctly interpret them. Assembler will evaluate product for correct performance and visual characteristics.\n, • Correctly interpret production documentation which includes work instructions, assembly processes and test procedures. Input test results into the First Pass Yield database and accurately complete First Article Inspection.\n, • Work as part of a team to achieve departmental goals. Should be able to meet the hourly targets set for the assigned area. Must attend daily morning huddles and All Hands Meetings, Update work station KPI\n, • Maintain work area in accordance with Safety policies and 5S principles. Apply continuous improvement techniques to the work area. Should adhere to PPE policies.\n, • Follow quality control checks to ensure products meets standards and report safety incidents and quality issues on the floor.\n\n Professional Experience/ Qualifications \n • Must pass a basic Math and English test with 75% accuracy and dexterity test\n, • Must be a high school graduate or equivalent/GED, and ability to read and write English.\n, • Ability to read blueprints, use pneumatic and basic hand tools\n, • Ability to meet consistent attendance\n\n\n, • Must be a quick learner and be able to follow procedures and written documentation to build product\n, • Willing to learn and complete audits on 5S, kanban, and participate in continuous improvement activities\n, • Must be able to sit or stand for long periods of time. Position demands some repetitive motion tasks (pushing/pulling and gripping)\n, • Ability to lift up to 35 lbs. \n\n This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Space, Intelligence & Weapons Systems has an exciting opportunity for multiple ASIC/FPGA Verification Engineers (Experienced, Lead, or Senior) to join us as part of our Boeing Electronic Products team in either El Segundo or Huntington Beach, CA. An alternative location that may become available based on program needs could be Fairfax, VA. From complex digitally beamformed phased arrays for constellation satellite programs to computing and networking equipment for commercial airplanes, the Boeing Electronic Products group develops ASICs and FPGAs that are at the heart of Boeing’s products! We leverage leading-edge technology and work with world-class partners to provide some of the most complex SoCs in the world. We develop robust, high-performance custom processors using the latest ARM IP to enable high-integrity, low SWAP-C flight computers. We apply the latest digital IC design processes with industry-best tools to enable applications which cut across every domain at Boeing. Our diverse development portfolio provides opportunities to learn with exposure to the breadth of the Boeing product line – approximately half our design/verification work is within the Space & Launch business unit, and half is from other parts of Boeing (AvionX; Missiles & Weapons; Strike, Surveillance and Mobility; and Autonomous Systems). As an ASIC/FPGA Verification Engineer on the Boeing Electronic Products team you will verify state-of-the-art digital ICs/SoCs to support the most critical programs across the enterprise. We collaborate with other electronics groups across the company and around the world and support ASIC/FPGA design and verification for electronics which we build in El Segundo or various other Boeing sites. Position Responsibilities: * Design and implement an ASIC/FPGA verification environment utilizing UVM & System Verilog. * Develop self-checking and reusable test benches from the ground up, employing Object-Oriented Programming principles such as Inheritance and Polymorphism, while utilizing UVM to build drivers, monitors, predictors, and scoreboards. * Create Functional Coverage Models and conduct Code Coverage analysis to ensure thorough verification of designs during simulation. * Set up regression tests and collect coverage metrics to ensure comprehensive verification and track progress over time. * Assist in FPGA-based prototyping and validation based on program and system requirements and complexity. * Collaborate with cross-functional teams to ensure that verification strategies align with overall project goals and timelines. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): * Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement * 5+ years of proven experience in ASIC/FPGA verification processes * Familiarity with defining the architectural framework for ASIC/FPGA verification using SystemVerilog/UVM, including the delivery and release of production designs * Proficiency in hardware verification languages, particularly SystemVerilog and SystemVerilog Assertions * Demonstrated experience in implementing test plans effectively * Solid understanding of Object-Oriented Programming principles, such as Inheritance and Polymorphism * Capability to design self-checking and reusable testbenches from the ground up * Experience in developing Functional Coverage Models and achieving Code Coverage closure * Capable of collaborating with design and system engineering to establish accurate and verifiable ASIC/FPGA level specifications * Familiarity with waveform debug tools * Revision Control Systems: svn, cvs, git * Proficiency in Linux Environments Preferred Qualifications (Desired Skills/Experience): * Lead, Level 4: 10+ years of related work experience or an equivalent combination of education and experience * Senior, Level 5: 15+ years of related work experience or an equivalent combination of education and experience * Master's Degree in EE, Computer Engineering/Science, or related field, or equivalent experience * Experience with hardware-based integration and test of ASIC/FPGA designs * Experience with hardware emulators, especially Palladium * Experience with high-speed Serdes interfaces (JESD204C, PCIe, Ethernet) * Proficient in scripting languages: Make, Perl, Python, etc. * Familiarity with space-based design techniques and radiation mitigation * Demonstrated history of 1st pass success with ASIC designs Conflict of Interest: Successful candidate for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Typical Education/Experience: Experienced, Level 3: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Lead, Level 4: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Senior, Level 5: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift Work Statement: This position is for 1st shift. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced (Level 3) $119,850 - $162,150 Summary pay range for Lead (Level 4): $126,650 - $171.350 $146,200 - $197,800 Summary pay range for Senior (Level 5) : $176,800 - $239,200 Applications for this position will be accepted until Apr. 01, 2026 Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Summary/Objective This off shift position is responsible for supervising hourly employees in a manufacturing environment. The position plans and assigns work, implements policies and procedures and recommends improvements in production methods, equipment, operating procedures and working conditions. The Supervisor is also responsible for supervising hourly employees in Sanitation environment focused on plant cleanliness/hygiene and food safety. Generally responsible for the plant during the shift. Shift: 6pm-2:30am M-F, with weekends and OT when required Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Provide employee direction and required training to meet safety, quality, and performance standards and expectations;, • Enforce quality, regulatory, and operational policies and procedures;, • Maintain employee time and attendance in timekeeping system;;, • Maintain documentation and performance logs of employees; conduct annual employee reviews, • Communicate and direct production maintenance technicians as required;, • Conduct team meetings (daily/weekly/monthly as applicable), including team member participation;, • Support and mentor the Team Leads in enforcing Good Manufacturing Practices (GMP), employee relations, scheduling, and operational objectives;, • Control expenditures within the department to maintain budget;, • Monitor Key Performance Indicators (KPI’s) and communicate results regarding safety, quality, and performance; implement corrective actions as required;, • Utilize Labware, Overall Equipment Effectiveness (OEE), inventory management system (SAP), and maintenance historian system to complete investigation corrections and maintain awareness of issues;, • Conduct and participate in continuous improvement activities and short and long-term projects;, • Assures inspection ready state of plant and equipment at all times. Participates and manages USDA and other regulatory and third-party inspections. Assure plant meets regulatory requirements at all time, • Support projects and trials as necessary and maintain proper documentation;, • Assure production lines start on time, reduce changeover and idle time, and manage overtime and staffing to achieve target labor costs;, • Monitor and reduce ingredient and rework usage, washouts, shutdown events, and product and chemical waste to improve packaging yield, and material losses;, • Works with Team Lead and, Maintains and updates the sanitation master plan, work instructions, teardown/inspection Preventative Maintenance (PM), and environmental scheduled tasks including documentation, • Reports results, issues, and activities each shift;, • Assures employee routine and required training to meet safety, quality, and performance standards and expectations including being trained and competent in confined space entry and ammonia risks and PPE usage requirements, • Enforce employee safety by assuring procedures are followed regardless of department or shift, • Work closely with the Quality department to assure that proper checks, documentation, and awareness is completed and maintained by all employees, • Responsible for planning daily production runs and Sanitation, meeting schedule requirements;, • Monitor and reduce Sanitation cost impacts through improvement of shutdown events, and product and chemical waste to improve product yield, COD impact, and material losses, • Coordinates chemical inventory and delivery, • Assures chemical knowledge, handling, and usage training of all plant employees annually or as required, • Maintain and train a competent team to operate specific lines for startups and shutdowns as required, • Maintains regular, predictable attendance, • Other duties as assigned Required Education and Experience • High school diploma or equivalent;, • 3-5 years’ experience as production lead or supervisor in manufacturing;, • Proficient in Microsoft Office software;, • Leadership, problem solving, organizational, and strong communication skills. Preferred Education and Experience • Bachelor’s degree in a relevant field;, • Five - eight years of general manufacturing experience; dairy or food manufacturing, • SAP, OEE, and CIM experience;, • Continuous Improvement knowledge Affirmative Action Plan/Equal Employment Opportunity Statement Savencia Cheese USA provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of these characteristics. Discrimination of any type will not be tolerated.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Millennium Space Systems (MSS), a part of Boeing Defense, Space and Security (BDS), is a fast, agile small satellite company focused on national security space. Our missions have direct impact to global security, like missile warning and Earth observation. Our team is curious, bold and innovative. We take risks, innovate and explore new techniques and technologies. We influence change because we challenge the status quo. And when we watch our satellites launch, we know each one of us made it happen. Millennium Space Systems (MSS) has an exciting opportunity for a Senior Network Engineer (Level 5) to join the MSS team in El Segundo, CA! We are seeking a highly skilled and experienced Senior Network Engineer to join our dynamic IT team. This pivotal role will be responsible for the design, implementation, maintenance, and optimization of our organization's network infrastructure. The IT Network Engineer will provide technical leadership, mentor junior engineers, and ensure the security, reliability, and scalability of our network operations. This position requires a deep understanding of networking principles, hands-on experience with complex network environments, and strong problem-solving capabilities. Strong communication and organizational skills are critical to success in this position, along with the ability to build strong relationships, collaborate in a cross-functional environment, and utilize problem-solving skills to proactively identify and manage risks and opportunities. Position Responsibilities: • Design, plan, and implement robust, scalable, and secure network architectures, including LAN, WAN, wireless, and cloud networking solutions, • Manage network security, including firewall configuration, intrusion detection/prevention systems, and access control, • Lead the deployment of network hardware and software, including routers, switches, firewalls, VPNs, and load balancers, • Ensure network resilience and implement disaster recovery and business continuity plans, • Develop and maintain comprehensive network documentation, including diagrams, configurations, and policies This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications (Required Skills/Experience): • Bachelor's Degree and 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.), • Experienced with multi-vendor switching and routing (e.g., Juniper, Cisco, Dell), • Experience with Quality of Service (QOS), routing and switching protocols, • Experience with Palo Alto next generation firewall systems, • Experience deploying and maintaining VPN technologies (e.g., IPsec, SSL VPN, Azure ExpressRoute), • Experience with Palo Alto Networks Panorama, • Active IAT Level 2 certifications per DoD Instruction 8570 (8140) Preferred Qualifications (Desired Skills/Experience): • Experience with network automation and scripting (e.g., Python, Ansible), • Proficiency in network monitoring and analysis tools (e.g., SolarWinds, Wireshark), • Experience with cloud networking environments (e.g., AWS, Azure), • Knowledge of wireless networking standards and technologies, • Juniper Networks Certified Internet Associate (JNCIA) or higher, • Palo Alto Networks Certified Network Security Administrator (PCNSA) or higher, • Cisco Certified Network Associate (CCNA) or higher Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Travel: Up to 10 percent travel Shift: 1st Shift Drug Free Workplace: Millennium Space Systems, a Boeing Company, is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards & Pay Transparency: Millennium Space Systems, a Boeing Company, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: • Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with immediate 100% vesting, • Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for: $158,950-$215,050 Applications for this position will be accepted until April 9, 2026 Applications for this position will be accepted until Apr. 10, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Back Master Planner/ Scheduling Supervisor #NHBC-270 Chatsworth, California, United States Apply X Facebook LinkedIn Email Copy Chatsworth, California, United States1st Shift New Hampshire Ball Bearings, Inc. (NHBB) is a leading manufacturer of precision bearings and complex bearing assemblies for the aerospace, defense, medical, dental, and high technology markets. Founded in Peterborough, NH in 1946, our almost 8 decades of success are rooted in our commitment to the safety, health and wellness of our employees, and partnerships with our customers, suppliers and the communities that surround us. NHBB's Precision Division is based in the western corner of the San Fernando Valley surrounded by the Santa Susanna Mountains to the west and Los Angeles to the east. We are always on the lookout for outstanding individuals with a strong work ethic, creative spirit and positive attitude. If you have what it takes to be successful and our NHBB Values speak to you, apply now. Job Summary: As a key supervisory role, the Master Production Planner Supervisor oversees a team of planners and schedulers responsible for comprehensive manufacturing scheduling, inventory management, and production flow optimization. This position ensures inventory accuracy via cycle counting, identifies and resolves constrained work centers, and develops strategic plans to maintain seamless daily operations that align with the overall ship plan. The supervisor leads process improvements, mentors team members, and collaborates across departments to drive efficiency and on-time delivery. Essential Duties and Responsibilities: • Lead and supervise a team of production planners and schedulers, including task delegation, performance coaching, and professional development., • Plan, analyze, and prioritize production department requirements to optimize resource allocation and output., • Facilitate and participate in daily production meetings to monitor progress and ensure on-time delivery targets are met., • Interface with leads, supervisors, managers, and cross-functional teams on all production planning matters, providing guidance and resolution as needed., • Develop and distribute daily set-up plans to assembly teams, adjusting for real-time constraints., • Establish and refine processes for production planning to meet specifications, schedules, volume, cost, waste, and quality standards., • Liaise with various departments, advocating for the production team's needs and escalating issues to appropriate managers., • Review operations, confer with technical or administrative staff, and implement solutions to resolve production or processing challenges., • Foster a culture of continuous improvement using tools like 5S, Kaizen, Value Stream Mapping, and other lean manufacturing principles., • Proficiency with MRP/ERP systems is essential., • Expert-level skills in MS Excel for data analysis and reporting., • Proven leadership and supervisory skills, with experience managing teams in a fast-paced environment., • Excellent communication skills, both verbal and written., • Strong communicator who is detail-oriented and adept at conveying complex information clearly., • Demonstrated organizational and multi-tasking abilities to handle team oversight and individual responsibilities., • Excellent interpersonal skills for building team morale and cross-departmental relationships., • Analytical mindset with strong math skills for forecasting and problem-solving., • Ability to thrive under pressure, meeting tight deadlines while maintaining composure., • Demonstrated critical thinking in resolving issues and optimizing processes., • Consistent track record of meeting deadlines and driving team accountability., • Strong team player who collaborates effectively while leading by example., • Excellent attention to detail in planning and inventory management., • Ability to work within tight time frames with a sense of urgency, prioritizing based on customer demands, inventory levels, and team capacity., • Associate's or Bachelor's degree in business, logistics, supply chain management, or a closely related field, • APICS certification (e.g., CPIM or CSCP) preferred, • Minimum of 7 years' experience in production control or planning, • Prolonged periods sitting at a desk and working on a computer. Disclaimer: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. The duties and responsibilities described are not a comprehensive list and additional tasks may be assigned to the employee from time to time. The job description doesn't constitute a contract of employment and the company may exercise its employment-at-will rights at any time. The above lists all of the essential functions, education, knowledge, skills and abilities required for this job. These are the minimum requirements; employees must also demonstrate good interpersonal skills, proper attitude and professionalism, acceptable attendance and work behaviors - at a minimum. Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. Pay Range: $72k to $80k DOE Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance #nhb123 #NHBBC

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Advanced Concepts and Enterprise Engineering (ACE), supporting Blue Origin's mission of millions of people living and working in space for the benefit of Earth. The team fosters innovation and drives engineering workflows of the future, shared solutions and standards, simplicity and lower costs, and manufacturable design. As part of a small, passionate and accomplished team of experts in the Systems and Avionics Center of Excellence, you will provide experienced technical leadership to Blue Origin program personnel and the established Radiation Effects team. From mission inception to operation, you will ensure success of Blue Origin's systems. You will actively engage program leadership and engineers to drive intelligent system design, part selection, subcontracts, and analyses. Responsibilities: • Contribute strongly to validation of space program designs with respect to radiation control plans, requirements, implementation, and verification; provide design engineering support for avionics and electrical systems, • Lead program design personnel through simulation and verification of digital, analog, and mixed-signal circuit performance with considerations for radiation effects; recommend radiation mitigation techniques where required to meet performance requirements, • Analyze impacts of space radiation on avionics and materials (SEE rates, testing requirements, and failure analysis), • Incorporate radiation effects test data and analysis results into avionics designs, • Generate thorough part-level, circuit-level, and system-level radiation effects analysis documentation, • Contribute to group-wide, program-wide, and company-wide knowledgebase for radiation effects on avionics and materials Minimum Qualifications: • B.S. (or higher) in Electrical Engineering, Physics, Computer Science, Nuclear Science, or related field, • 7+ years of experience in design, analysis, and/or testing for radiation effects on electronics and materials, • Noteworthy experience in the following:, • performing or overseeing electrical circuit analysis and implementation of radiation effects mitigations, • standard radiation environment modeling tools (ex: IRENE, OMERE, SIRE2, SPENVIS, OLTARIS, CREME96, SAPPHIRE, ESP/PSYCHIC), • application of fundamental statistical methods, • presenting radiation requirements, results, and plans to peers and customers to meet program/customer needs, • Strong familiarity with the following:, • the effects of ionizing/non-ionizing radiation on electronics, • basic and complex discrete and integrated circuits (transistors, logic, memories, microcontrollers, FPGAs, etc.), • industry-standard radiation effects analyses (environment definition, SEECA, TID analysis, DDD analysis, etc.), • radiation effects testing (SEE, TID, DDD), • Excellent written and verbal communication skills, • Ability to work with minimal oversight regarding radiation effects on electronics, • Domestic travel required. Foreign travel possible. Preferred Qualifications: • Experience in the following:, • the use of commercial or automotive parts in a radiation environment, • producing detailed program-deliverable documentation (control plans, test plans/reports, design reviews, system-level analyses, etc.), • leading technical projects from inception to completion, • radiation transport and other analysis tools (ex: MCNP, NOVICE, FASTRAD, GEANT4, OLTARIS), • Familiarity with the following:, • radiation assessments and mitigation for human space crews, • radiation effects on spacecraft materials, • laboratory equipment for radiation effects test (power supplies, data acquisition systems, electronic loads, SMUs, etc.), • rad-tolerant and rad-hard offerings of space electronics providers, • Proficiency with the following programming languages, platforms, and protocols: Python, C, Gitlab, SQL, I2C, SPI, • Basic electronics lab skills include soldering; use of oscilloscopes, multimeters, and logic analyzers, • Project management skills and experience, • Experience with ownership of end-to-end radiation effects analysis, schedule execution, etc., for a program or product, • Experience in development, planning and execution of Integrated Master Schedules Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Alliant International University is a professional practice University committed to excellence in four areas:Education for Professional Practice, Scholarship, Multicultural and International Competence and Community Engagement.The University provides students with the highest quality of education through excellence and innovation in academic scholarship, applied training and research, and community service, particularly to underserved populations.Through its Mission, the University's goal is to equip students with the competencies they need to provide public benefit and make an impact in their communities by addressing major contemporary social issues.Core competencies of the University's training programs include cultural diversity, which is infused in courses and field placements and is manifest in the diversity of its students, faculty. Our Mission: Alliant International University prepares students for professional careers of service and leadership, and promotes the discovery and application of knowledge to improve the lives of people in diverse cultures and communities around the world. Our Vision: An inclusive world empowered by Alliant alumni. Position Summary: Adjunct Faculty for the Hospitality Management Concentration - MBA Program, under the direction of the Program Director of MBA, provides on campus instruction, guidance, and support to CSML students at the Los Angeles Campus for the following courses: • Entrepreneurship in Hospitality, • Trends in Hospitality, • Human Resources Management for Hospitality Each course has a duration of 8 weeks with 1 additional week for the instructor to prep and 1 additional week for grading. The course meets one day a week for 4 hours or is in the executive format. Starting Salary: $36.00 per hour. Minimum Qualifications: Education: Master's, Doctoral or other terminal degree from an accredited college or university, depending upon the needs of the course being taught. Experience: 5 years of appropriate experience in the areas(s) of specialization and expertise required for candidates with a Master's degree. Two (2) years of appropriate experience in the area(s) of specialization and expertise required for candidates with a doctoral degree. Certifications, Licenses, etc.: None Skills: • Proficient computer skills, including proficiency with Microsoft Office programs., • The ability to work independently and be self-motivated., • High level of accuracy and attention to detail and the ability to problem solve., • The ability to explain complex requirements in clear and concise terms., • The ability to be flexible with workflow to meet the needs of the department and students and to manage multiple tasks per required deadlines., • The drive to encourage, direct, hold accountable and guide candidates toward task completion., • Must demonstrate the ability to work as an effective team member and develop trusting relationships with students and Alliant employees, as well as the Registrar's Office and various academic departments., • Culturally competent and ability to communicate and interact effectively with diverse people., • Highly motivated, focused and results oriented., • Ability to exercise discretion and tact in all interpersonal interactions, and to maintain confidentiality., • Collaboration and partnering with other university stakeholders to support candidate success., • Ability to make administrative/procedural decisions and judgments. Duties & Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Facilitating Classroom and Distance/Distributed Learning, • Course and syllabus preparation, • Class curriculum coordination and planning, • Assessment and evaluation of learners, • Mentoring and advising of students, • Holding office hours and meeting with students Supervisory Responsibility: Direct Reports: Program Director, Master of Business Program (MBA). Indirect Reports: None. Contact Responsibility: Internal: Interacts with Program Director, Campus Director and Academic Program Coordinator to receive support and guidance throughout the instructional term. Main communication is between Adjunct Faculty and currently enrolled candidates. External: None. Primary Work Location, Hours & Travel Requirements: Office Location: Los Angeles Campus Work Hours: N/A Travel: None Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work environment is in a standard office setting. Frequently exposed to low to moderate noise, various odors, temperature changes, and equipment with moving parts, including but not limited to computers, phones, printers, and other standard office equipment. Physical Requirements: Ability to execute those physical activities required to perform the essential functions including, but not limited to, regular sitting and being mobile; continual communicating; regular keyboarding; regular reading of both print and digital material; and all other activities required to perform essential functions. Compliance: • Responsible to perform all work in a manner that complies with the organization policies, applicable regulations, applicable standards of professional performance, or other recognized laws or requirements as these policies, regulations, standards, laws or requirements relate to the position., • Responsible to participate and support in the organizational compliance activities and to take appropriate action in reporting issues related to compliance., • Responsible to perform all duties and responsibilities in a manner that complies with the Alliant International University Mission, Values, and Pillars, if applicable. Background Check Requirements: Employment is contingent upon successful completion of a background check (including criminal, prior employment and education verification). Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current University employees who apply for the position. Additional Information: Anti-Discrimination Policy: Alliant International University prohibits unlawful discrimination, harassment or retaliation in its educational programs, services and activities, and in employment practices, including but not limited to internal promotions, training, opportunities for advancement, terminations, relationships with outside vendors, use of contractors and consultants, and in its admission or access thereto, on the basis of race, ethnicity, national origin or descent, color, creed, religion, sex, age, marital status, disability (including physical, disease, psychiatric or psychological disability), medical condition, pregnancy, veteran status, sexual orientation, gender identification or expression, hair style or texture associated with race, or any other characteristics protected by applicable law. Alliant International University is an Equal Opportunity Employer, committed to ensuring a high quality of education through the diversity of the University community and the curriculum. Women, people of color, people with disabilities and people from other underrepresented groups are encouraged to apply, as we actively seek to increase diversity at all levels. The University will conduct its programs, services and activities consistent with applicable federal, state and local laws, regulations and orders. Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. Applicants with disabilities and applicants who require assistance completing an application may contact Human Resources at___or 858-635-4509. The California Consumer Privacy Act (CCPA) requires that we provide you with this ______.This notice is about the collection and use of your personal information.We encourage you to read this notice carefully. Governing legislation: Titles VI and VII of the Civil Rights Act of 1964, the Civil Rights Act of 1991, Title IX of the Education Amendments Act of 1972, Section 504 of the Rehabilitation Act of 1973, the Americans with Disabilities Act of 1990, the Age Discrimination Act of 1975, the regulations implementing these statutes, and applicable federal and California law. Alliant International University is a smoke and tobacco free environment. Company:Alliant University Country:United States of America State/Region:California City: Alhambra Postal Code:91803 Job ID:273135

Alliant International University is a professional practice University committed to excellence in four areas: Education for Professional Practice, Scholarship, Multicultural and International Competence, and Community Engagement. The University provides students with the highest quality of education through excellence and innovation in academic scholarship, applied training and research, and community service, particularly to underserved populations. Through its Mission, the University's goal is to equip students with the competencies they need to effectively practice in the professional setting, provide public benefit and make an impact in their communities by addressing major contemporary social issues. Our Mission:Alliant International University prepares students for professional careers of service and leadership and promotes the discovery and application of knowledge to improve the lives of people in diverse cultures and communities around the world. Our Vision:An inclusive world empowered by Alliant alumni. Our IMPACT Values: • Inclusion:We value and engage the rich diversity of the Alliant community., • Mentoring:We provide guidance and create enabling environments for success., • Passion:We bring enthusiasm, creativity, and authenticity to our work., • Accountability:We act with integrity and responsibility in all we do., • Communication:We are responsive, transparent, and respectful in our interactions., • Teamwork:We collaborate to develop innovative solutions for our community. Application Instructions: • All individuals interested in being considered for an Adjunct position, now or in the future, must submit the following items:, • Resume/CV, • Transcript (of your highest degree obtained) CSML is seeking qualified part-time instructors to teach in our STEM MSIST Master Science Information Systems Technology courses in our LA campus. Specifically, we are looking for candidates who can teach the following courses: • Database Design Principles and Technologies, • Information Systems Technology and Infrastructure Management, • Essentials of Computational Science Using Python, • Data Analytics for Decision Making, • Management of Information Security, • Enterprise Systems Analysis and Project Management, • Technology Tools for Managerial Decision Making, • Advanced Programming with Python, • Cybersecurity Technology, • Cloud Computing Concepts, Tools, and Applications Starting Salary: $32 hourly. You can learn more about CSML by visiting the Alliant web site at___. If you are interested in joining our team of experts or have other questions about our program, please contact us at___. CSML continually seeks subject matter experts to join our cadre of adjunct faculty. The following are the duties, responsibilities, skills and qualifications that Alliant requires from applicants for an Adjunct professor position: Pedagogical & Academic Skills: • Facilitating Classroom and Distance/Distributed Learning, • Course and syllabus preparation, • Class curriculum coordination and planning, • Assessment and evaluation of learners, • Mentoring and advising students, • Holding office hours and meeting with students, • Research/scholarship mentoring and supervision, particularly of MS theses, STEM projects, and PhD, EdD, DBA dissertations Skills: • Proficient computer skills, including proficiency with Microsoft Office programs., • The ability to work independently and be self-motivated., • High level of accuracy and attention to detail and the ability to solve problems., • The ability to explain complex requirements in clear and concise terms, • The ability to be flexible with workflow to meet the needs of the department and students and to manage multiple tasks by required deadlines, • The drive to encourage, direct, hold accountable and guide candidates toward task completion., • Must demonstrate the ability to work as an effective team member and develop trusting relationships with students and Alliant employees, as well as the Registrar's Office and various academic departments., • Culturally competent and ability to communicate and interact effectively with diverse people., • Highly motivated, focused and results oriented., • Ability to exercise discretion and tact in all interpersonal interactions, and to maintain confidentiality., • Collaboration and partnering with other university stakeholders to support candidate success., • Ability to make administrative/procedural decisions and judgments Technical & Subject Matter Expertise: • Expertise in machine learning, artificial intelligence, and predictive modeling, • Advanced knowledge of information systems, data management, and enterprise architecture, • Expertise in one or more of the following: cybersecurity, including network security, risk assessment, network engineering, CRM/ERP, compliance frameworks, • Proficiency in database systems, SQL, and modern data warehousing concepts, • Strong understanding of cloud computing and infrastructure technologies (e.g., AWS, Azure, GCP), • Knowledge of software engineering principles and system development life cycle (SDLC), • Familiarity with emerging technologies: AI/ML, blockchain, IoT, big data analytics, • Competence in programming languages (e.g., Python, Java, C++, R, or equivalent), • Experience with data visualization and analytics tools (e.g., Tableau, Power BI, RStudio, SAS), • Understanding of IT governance, compliance, and digital transformation strategies, • Knowledge of networking protocols, architectures, and security measures Minimum Requirements: • Education:Master's, Doctoral or other terminal degrees from an accredited college or university, depending upon the needs of the course being taught., • Experience: 5 years' appropriate industry experience in the areas(s) of specialization and expertise required Background Check Requirements: Employment is contingent upon successful completion of a background check (including criminal, prior employment and education verification). Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current University employees who apply for the position. Additional Information: Anti-Discrimination Policy: Alliant International University prohibits unlawful discrimination, harassment or retaliation in its educational programs, services and activities, and in employment practices, including but not limited to internal promotions, training, opportunities for advancement, terminations, relationships with outside vendors, use of contractors and consultants, and in its admission or access thereto, on the basis of race, ethnicity, national origin or descent, color, creed, religion, sex, age, marital status, disability (including physical, disease, psychiatric or psychological disability), medical condition, pregnancy, veteran status, sexual orientation, gender identification or expression, hair style or texture associated with race, or any other characteristics protected by applicable law. Alliant International University is an Equal Opportunity Employer, committed to ensuring a high quality of education through the diversity of the University community and the curriculum. Women, people of color, people with disabilities and people from other underrepresented groups are encouraged to apply, as we actively seek to increase diversity at all levels. The University will conduct its programs, services and activities consistent with applicable federal, state and local laws, regulations and orders. Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. Applicants with disabilities and applicants who require assistance completing an application may contact Human Resources at___or 858-635-4509. The California Consumer Privacy Act (CCPA) requires that we provide you with this ______.This notice is about the collection and use of your personal information.We encourage you to read this notice carefully. Governing legislation: Titles VI and VII of the Civil Rights Act of 1964, the Civil Rights Act of 1991, Title IX of the Education Amendments Act of 1972, Section 504 of the Rehabilitation Act of 1973, the Americans with Disabilities Act of 1990, the Age Discrimination Act of 1975, the regulations implementing these statutes, and applicable federal and California law. Alliant International University is a smoke and tobacco free environment. Company: Alliant International University, Inc. | Job ID: 283829

Alliant International University is a professional practice University committed to excellence in four areas:Education for Professional Practice, Scholarship, Multicultural and International Competence and Community Engagement.The University provides students with the highest quality of education through excellence and innovation in academic scholarship, applied training and research, and community service, particularly to underserved populations.Through its Mission, the University's goal is to equip students with the competencies they need to provide public benefit and make an impact in their communities by addressing major contemporary social issues.Core competencies of the University's training programs include cultural diversity, which is infused in courses and field placements and is manifest in the diversity of its students, faculty. Our Mission: Alliant International University prepares students for professional careers of service and leadership, and promotes the discovery and application of knowledge to improve the lives of people in diverse cultures and communities around the world. Our Vision: An inclusive world empowered by Alliant alumni. Position Summary: Adjunct Faculty for the Technology and Statistics - MBA Program, under the direction of the Program Director of MBA, provides on campus instruction, guidance, and support to CSML students at the Los Angeles Campus for the following courses: • Analysis of Financial and Accounting Data, • Technology Tools for Managerial Decision Making, • Statistical Analysis and Modeling for Business, • Technology Enabled Operations Management Each course has a duration of 8 weeks with 1 additional week for the instructor to prep and 1 additional week for grading. The course meets one day a week for 4 hours or is in the executive format. Starting Salary:$36 an hour. Minimum Qualifications: Education: Master's, Doctoral or other terminal degree from an accredited college or university, depending upon the needs of the course being taught. Experience: 5 years of appropriate experience in the areas(s) of specialization and expertise required for candidates with a Master's degree. Two (2) years of appropriate experience in the area(s) of specialization and expertise required for candidates with a doctoral degree. Certifications, Licenses, etc.: None Skills: • Proficient computer skills, including proficiency with Microsoft Office programs., • The ability to work independently and be self-motivated., • High level of accuracy and attention to detail and the ability to problem solve., • The ability to explain complex requirements in clear and concise terms., • The ability to be flexible with workflow to meet the needs of the department and students and to manage multiple tasks per required deadlines., • The drive to encourage, direct, hold accountable and guide candidates toward task completion., • Must demonstrate the ability to work as an effective team member and develop trusting relationships with students and Alliant employees, as well as the Registrar's Office and various academic departments., • Culturally competent and ability to communicate and interact effectively with diverse people., • Highly motivated, focused and results oriented., • Ability to exercise discretion and tact in all interpersonal interactions, and to maintain confidentiality., • Collaboration and partnering with other university stakeholders to support candidate success., • Ability to make administrative/procedural decisions and judgments. Duties & Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Facilitating Classroom and Distance/Distributed Learning, • Course and syllabus preparation, • Class curriculum coordination and planning, • Assessment and evaluation of learners, • Mentoring and advising of students, • Holding office hours and meeting with students Supervisory Responsibility: Direct Reports: Program Director, Master of Business Program (MBA). Indirect Reports: None. Contact Responsibility: Internal: Interacts with Program Director, Campus Director and Academic Program Coordinator to receive support and guidance throughout the instructional term. Main communication is between Adjunct Faculty and currently enrolled candidates. External: None. Primary Work Location, Hours & Travel Requirements: Office Location: Los Angeles Campus Work Hours: N/A Travel: None Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work environment is in a standard office setting. Frequently exposed to low to moderate noise, various odors, temperature changes, and equipment with moving parts, including but not limited to computers, phones, printers, and other standard office equipment. Physical Requirements: Ability to execute those physical activities required to perform the essential functions including, but not limited to, regular sitting and being mobile; continual communicating; regular keyboarding; regular reading of both print and digital material; and all other activities required to perform essential functions. Compliance: • Responsible to perform all work in a manner that complies with the organization policies, applicable regulations, applicable standards of professional performance, or other recognized laws or requirements as these policies, regulations, standards, laws or requirements relate to the position., • Responsible to participate and support in the organizational compliance activities and to take appropriate action in reporting issues related to compliance., • Responsible to perform all duties and responsibilities in a manner that complies with the Alliant International University Mission, Values, and Pillars, if applicable. Background Check Requirements: Employment is contingent upon successful completion of a background check (including criminal, prior employment and education verification). Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current University employees who apply for the position. Additional Information: Anti-Discrimination Policy: Alliant International University prohibits unlawful discrimination, harassment or retaliation in its educational programs, services and activities, and in employment practices, including but not limited to internal promotions, training, opportunities for advancement, terminations, relationships with outside vendors, use of contractors and consultants, and in its admission or access thereto, on the basis of race, ethnicity, national origin or descent, color, creed, religion, sex, age, marital status, disability (including physical, disease, psychiatric or psychological disability), medical condition, pregnancy, veteran status, sexual orientation, gender identification or expression, hair style or texture associated with race, or any other characteristics protected by applicable law. Alliant International University is an Equal Opportunity Employer, committed to ensuring a high quality of education through the diversity of the University community and the curriculum. Women, people of color, people with disabilities and people from other underrepresented groups are encouraged to apply, as we actively seek to increase diversity at all levels. The University will conduct its programs, services and activities consistent with applicable federal, state and local laws, regulations and orders. Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. Applicants with disabilities and applicants who require assistance completing an application may contact Human Resources at___or 858-635-4509. The California Consumer Privacy Act (CCPA) requires that we provide you with this ______.This notice is about the collection and use of your personal information.We encourage you to read this notice carefully. Governing legislation: Titles VI and VII of the Civil Rights Act of 1964, the Civil Rights Act of 1991, Title IX of the Education Amendments Act of 1972, Section 504 of the Rehabilitation Act of 1973, the Americans with Disabilities Act of 1990, the Age Discrimination Act of 1975, the regulations implementing these statutes, and applicable federal and California law. Alliant International University is a smoke and tobacco free environment. Company:Alliant University Country:United States of America State/Region:California City: Alhambra Postal Code:91803 Job ID:273134

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the Lunar Permanence business unit, which develops Blue Origin's Blue Moon landers and related products. To further Blue Origin's mission of millions of people living and working in space for the benefit of Earth, we are building sustainable infrastructure for our transport of crew and cargo from Earth to the lunar surface. As a Firmware and Embedded Software Engineering Operations Lead on the Lunar Avionics Team, you will work directly with the Integrated Product Team (IPT) to deliver the embedded software and firmware systems that will power human flight to and on the surface of the moon. You will perform project management functions across the entire embedded software and firmware lifecycle from requirements definition, design development, integration with flight hardware, verification, and deployment to production systems. You will assist communicating status, risks & opportunities, variances, and recovery plans to engineering and program management. You will play a key role in developing the Lunar Transportation system that will return humans to the Moon and extend human presence permanently beyond the bounds of Earth. If you have experience delivering integrated firmware and embedded software systems that interface with electronics, mechanical systems, and hardware platforms and you want to be a part of history, come join us at Blue Origin. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! Responsibilities include but are not limited to: • Maintain the team's operating cadence through communication to stakeholders, management of key performance indicators and project meetings to report key performance metrics (technical, cost, schedule, and risk) for firmware and embedded software development, • Generate boards/tools necessary for project and product health to Lunar Product Engineering, including data for Weekly Business Reviews (WBR) and Lunar Program Weekly Review and Program Management Reviews (PMRs), • Performs scrum master role for firmware and embedded software teams following agile development methods, including defining and executing team sprints, • Supports team representation in agile product planning sessions and release planning activities, • Define, monitor, and track all receivables and deliverable products from the firmware and embedded software IPT, • Maintain an integrated management schedule factoring in dependencies and deliverables across the Lunar program for the embedded software and firmware scope, • Work closely with internal and external hardware integration facilities and test environments to coordinate on-time delivery of firmware and embedded software systems, • Coordinate firmware integration with hardware systems, ensuring seamless operation between embedded software and avionics hardware platforms, • Lead tiger teams for critical firmware issues and integration challenges, • Be a mentor and offer leadership, putting those around you first Minimum Qualifications: • B.A. or B.S. degree or equivalent experience in Computer Engineering, Electrical Engineering, Computer Science, Software Engineering, or related technical disciplines, • 3+ years in Aerospace, Automotive, Consumer Electronics, Defense, Industrial or similar industries, executing design or production of firmware and embedded software systems that interface with hardware, • 3+ years of experience in technical program management managing integrated firmware, embedded software, and hardware engineering development projects, managing requirements, priorities, scope, schedule, and cost, • 3+ years working directly with hardware integration teams or suppliers in the execution of firmware deployment, hardware-software integration, or embedded systems development, • 5+ years working directly with firmware and embedded software engineering teams in bringing integrated hardware-software products from concept to production, • Experienced at collecting and synthesizing information from multiple stakeholders and translating data into firmware/software project requirements, scoping and planning documents, • Experience with Agile or Scaled Agile, MS Project, P6 Primavera, or similar project management tools, • Strong background in embedded software development lifecycle and firmware integration processes with hardware systems, • Ability to work collaboratively in a fast-paced, dynamic work environment while regularly providing imaginative and detailed technical solutions to complex embedded systems problems Preferred Qualifications: • Master's Degree in Computer Engineering, Electrical Engineering, Computer Science, or MBA, • 5+ years of experience in technical program management managing complex integrated firmware, embedded software, and hardware engineering development projects, managing requirements, priorities, scope, schedule, and cost, • 7+ years working directly with firmware and/or embedded software engineering teams in bringing integrated hardware-software products from concept to production, • Project Management Professional (PMP) certification, • Experience with DO-178C, DO-254 and other relevant certification standards for safety-critical embedded systems, • Experience with real-time operating systems (RTOS) and flight software development, • Knowledge of embedded software testing, verification, and validation processes, • Experience with version control systems, continuous integration, and DevOps practices for embedded systems Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Alliant International University is a professional practice University committed to excellence in four areas:Education for Professional Practice, Scholarship, Multicultural and International Competence and Community Engagement.The University provides students with the highest quality of education through excellence and innovation in academic scholarship, applied training and research, and community service, particularly to underserved populations.Through its Mission, the University's goal is to equip students with the competencies they need to provide public benefit and make an impact in their communities by addressing major contemporary social issues.Core competencies of the University's training programs include cultural diversity, which is infused in courses and field placements and is manifest in the diversity of its students, faculty. Our Mission: Alliant International University prepares students for professional careers of service and leadership, and promotes the discovery and application of knowledge to improve the lives of people in diverse cultures and communities around the world. Our Vision: An inclusive world empowered by Alliant alumni. Position Summary: Adjunct Faculty for the Management - MBA Program, under the direction of the Program Director of MBA, provides on campus instruction, guidance, and support to CSML students at the Los Angeles Campus for the following courses: • Strategic Management, • Capstone: Management in a New Age, • Technology Enabled Operations Management Each course has a duration of 8 weeks with 1 additional week for the instructor to prep and 1 additional week for grading. The course meets one day a week for 4 hours or is in the executive format. Starting salary:$36 an hour. Minimum Qualifications: Education: Master's, Doctoral or other terminal degree from an accredited college or university, depending upon the needs of the course being taught. Experience: Five (5) years of appropriate experience in the areas(s) of specialization and expertise required for candidates with a master's degree. Two (2) years of appropriate experience in the area(s) of specialization and expertise required for candidates with a doctoral degree. Certifications, Licenses, etc.: None. Skills: • Proficient computer skills, including proficiency with Microsoft Office programs., • The ability to work independently and be self-motivated., • High level of accuracy and attention to detail and the ability to problem solve., • The ability to explain complex requirements in clear and concise terms., • The ability to be flexible with workflow to meet the needs of the department and students and to manage multiple tasks per required deadlines., • The drive to encourage, direct, hold accountable and guide candidates toward task completion., • Must demonstrate the ability to work as an effective team member and develop trusting relationships with students and Alliant employees, as well as the Registrar's Office and various academic departments., • Culturally competent and ability to communicate and interact effectively with diverse people., • Highly motivated, focused and results oriented., • Ability to exercise discretion and tact in all interpersonal interactions, and to maintain confidentiality., • Collaboration and partnering with other university stakeholders to support candidate success., • Ability to make administrative/procedural decisions and judgments Duties & Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Facilitating Classroom and Distance/Distributed Learning., • Course and syllabus preparation., • Class curriculum coordination and planning., • Assessment and evaluation of learners., • Mentoring and advising of students., • Holding office hours and meeting with students. Supervisory Responsibility: Direct Reports: Program Director, Master of Business Program (MBA). Indirect Reports: None. Contact Responsibility: Internal: Interacts with Program Director, Campus Director and Academic Program Coordinator to receive support and guidance throughout the instructional term. Main communication is between Adjunct Faculty and currently enrolled candidates. External: None. Primary Work Location, Hours & Travel Requirements: Office Location: Los Angeles Campus. Work Hours: N/A. Travel: None. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work environment is in a standard office setting. Frequently exposed to low to moderate noise, various odors, temperature changes, and equipment with moving parts, including but not limited to computers, phones, printers, and other standard office equipment. Physical Requirements: Ability to execute those physical activities required to perform the essential functions including, but not limited to, regular sitting and being mobile; continual communicating; regular keyboarding; regular reading of both print and digital material; and all other activities required to perform essential functions. Compliance: • Responsible to perform all work in a manner that complies with the organization policies, applicable regulations, applicable standards of professional performance, or other recognized laws or requirements as these policies, regulations, standards, laws or requirements relate to the position., • Responsible to participate and support in the organizational compliance activities and to take appropriate action in reporting issues related to compliance., • Responsible to perform all duties and responsibilities in a manner that complies with the Alliant International University Mission, Values, and Pillars, if applicable. Background Check Requirements: Employment is contingent upon successful completion of a background check (including criminal, prior employment and education verification). Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current University employees who apply for the position. Additional Information: Anti-Discrimination Policy: Alliant International University prohibits unlawful discrimination, harassment or retaliation in its educational programs, services and activities, and in employment practices, including but not limited to internal promotions, training, opportunities for advancement, terminations, relationships with outside vendors, use of contractors and consultants, and in its admission or access thereto, on the basis of race, ethnicity, national origin or descent, color, creed, religion, sex, age, marital status, disability (including physical, disease, psychiatric or psychological disability), medical condition, pregnancy, veteran status, sexual orientation, gender identification or expression, hair style or texture associated with race, or any other characteristics protected by applicable law. Alliant International University is an Equal Opportunity Employer, committed to ensuring a high quality of education through the diversity of the University community and the curriculum. Women, people of color, people with disabilities and people from other underrepresented groups are encouraged to apply, as we actively seek to increase diversity at all levels. The University will conduct its programs, services and activities consistent with applicable federal, state and local laws, regulations and orders. Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. Applicants with disabilities and applicants who require assistance completing an application may contact Human Resources at___or 858-635-4509. The California Consumer Privacy Act (CCPA) requires that we provide you with this ______.This notice is about the collection and use of your personal information.We encourage you to read this notice carefully. Governing legislation: Titles VI and VII of the Civil Rights Act of 1964, the Civil Rights Act of 1991, Title IX of the Education Amendments Act of 1972, Section 504 of the Rehabilitation Act of 1973, the Americans with Disabilities Act of 1990, the Age Discrimination Act of 1975, the regulations implementing these statutes, and applicable federal and California law. Alliant International University is a smoke and tobacco free environment. Company:Alliant University Country:United States of America State/Region:California City: Alhambra Postal Code:91803 Job ID:273131

The Position ITOT supports Pharma Technical Manufacturing (PTM), PTM is responsible for managing all aspects of end-to-end drug substance and drug product manufacturing and supply. From the raw material to the final medicine, we contribute to deliver Roche's ground-breaking therapies to more than 120 million patients around the world. We make our medicines at 9 sites around the world and coordinate all aspects of production of Roche medicines in all disease areas and dosage forms. To ensure readiness for a step-change in the standard of care that Roche delivers in the area of Cardiovascular, Renal and Metabolism (CVRM), PTM will construct a new manufacturing site in the U.S. in Holly Spring, North Carolina. ITOT will own and operate Manufacturing Technology stack at the site working with Global IT. The new site will focus on large volume low cost Drug Product manufacturing (Component Prep & Compounding, Liquid PFS Filling, Automated Inspection, Autoinjector Assembly, Packaging/Finished Products). The Opportunity A Senior Principal Automation Engineer is being hired to participate in Greenfield Project execution and then support the facility after going live. Initially, you will perform a mix of remote and onsite work (first at the General Planner's office, later at construction site/plant). You will transition to local full time on-site work once the site buildings are built and equipment delivered. Travel of up to 30% of the time is expected during the project phase. Senior Principal Automation Engineer (Department: ITOT/Automation Engineering - Leadership Role) will be responsible for providing automation and instrumentation and controls engineering capabilities and experience to the ITOT / Automation Engineering Group including generating qualification protocols and maintaining the validated state of systems and processes. Initially, participates in Basic Design, Detailed Design and Facility Startup. Eventually focuses on providing long-term support for newly built facilities with respect to the automation and instrumentation and control systems for process, utility and building systems. Lead automation impacting projects with large and/or complex scope. Drive strategic initiatives to improve business processes. Be both a People Leader/ Coach and at times hands on SME. What You'll Do • Provide automation, instrumentation, and control engineering design services for facility projects, including upgrades, capacity expansions, and equipment replacements.., • Produce and review design drawings and specification documents (URS, FS, DS, etc.)., • Support end-to-end system qualification, including test creation, execution, review and approval., • Manage personal project activities (design and qualification) following Genentech/Roche business processes to deliver results that are right first time, on-time with schedule requirements and reconciled to the budget., • Review and approve vendor information packages, including drawings and specifications as directed to ensure user requirements are met., • Support plant operations to assess discrepant events and changes for automation impact, deliver automation solutions to resolve operational issues, assist in troubleshooting and providing real time on floor support of manufacturing operations, participate in site coordination meetings and attend network meetings., • Author and then Adhere to site SOPs and work instructions for daily and project deliverables. Drive improvements to business processes., • Support inspection activities to present automation design and qualification deliverables and strategy (e.g. Qualification Project Plans and Master Plans)., • Adhere to company policies regarding performance management, department time reporting and notification requirements, budget, and expense reporting guidelines., • Automation lead for equipment/software FAT, field testing and commissioning, • Provide scope, qualification, resource, and budget estimates for automation impacting projects., • Manage employees/ contractor staff, track project deliverables, and provide status updates to the project team., • Manage teams (contractor and FTE staff) by setting clear expectations for work delivered and behaviors. Monitor performance and ensure contractual obligations are met. Complete timely review of time sheets and invoices., • Provide input into network/global business processes and procedures (e.g. GSPs)., • All employees with jobs that require access to the Warehouse must be able to pass the Transportation Security Administration (TSA) Security Threat Assessment (STA)., • Ensures the integration of environmental health, safety, and security into the business processes, systems, and programs while reporting safety and environmental incidents including injuries, illnesses, and safety suggestions within one's functional area. Fosters a positive safety culture in which no one gets hurt., • Support work of the Engineering Group, which includes research/evaluate instrumentation and control components, review/modify control system concept/logic as a result of troubleshooting. Who You Are • Bachelor's or Master's degree in Engineering (Chemical, Mechanical, Electrical, or Computer Science preferred) and 8 years experience, or Master's degree in Engineering (Chemical, Mechanical, Electrical, or Computer Science preferred) and 7years experience., • Minimum of 8 years applicable automation and/or instrument and control system experience preferably majority in drug product function, • 5 years in the pharmaceutical/biotech industry/GMP experience., • 24X7 on call support, participate in an on-call environment to meet business continuity requirements, including weekends and holidays as required. Knowledge, Skills and Abilities • Experience with Biopharmaceutical manufacturing, design or/and construction., • Knowledge of Industrial Ethernet networks for manufacturing., • Knowledge of vision systems, • Knowledge of Drug Product Manufacturing processes including aseptic or robotic fillings systems, vial handling, environmental monitoring and clean utilities., • Knowledge of communication protocols for devices (OPC, Modbus, MQTT, Ethernet IO, IOT), • Knowledge of integration and data transfer with Level 2, 3, and 4 systems., • Qualification experience related to control and computer systems., • Ability to generate engineering drawings and specifications., • Knowledge of ISA standards and practices for instrumentation., • Knowledge of PID control theories and techniques., • Knowledge of programmable logic controllers, and associated programming languages (RS Logix Preferred)., • Practical knowledge of process automation systems, and associated programming languages (Rockwell and Siemens preferred)., • Demonstrate strong organizational, communication, and interpersonal skills to effectively manage tasks and collaborate with diverse teams., • Ability to comply with cGMP requirements (gowning, documentation, and procedures) for performing work within the manufacturing facility., • Demonstrate strong working knowledge of PC based programs and web based systems., • Ability to work independently with no direct supervision., • Knowledge of GAMP5, • Work in a standard office environment., • May work in the clean room environment that requires gowning in the form of hospital scrubs, coveralls, gloves and steel toe boots. No make-up or jewelry can be worn when working in the clean room environment., • May work with hazardous materials and chemicals. Relocation funding is available for this role. The expected salary range for this position based on the primary location of Holly Springs, North Carolina is $114,400 - $212,400. Actual pay will be determined based on experience, qualifications, geographic location, and other job-related factors permitted by law. A discretionary annual bonus may be available based on individual and Company performance. This position also qualifies for the benefits detailed at the link provided below. Genentech is an equal opportunity employer. It is our policy and practice to employ, promote, and otherwise treat any and all employees and applicants on the basis of merit, qualifications, and competence. The company's policy prohibits unlawful discrimination, including but not limited to, discrimination on the basis of Protected Veteran status, individuals with disabilities status, and consistent with all federal, state, or local laws. If you have a disability and need an accommodation in relation to the online application process, please contact us by completing this form ___.

DESCRIPTION: West Basin Municipal Water District (West Basin) is a leader in the water industry in water recycling, conservation, water resource management, and youth and adult education. West Basin provides wholesale drinking water and recycled water to eight local retail water agencies including four cities, three private water companies, and one county water agency. The District serves a population of nearly one million residents in 17 cities and unincorporated areas along the coastal corridor of southern Los Angeles County. The District is governed by an elected five-member Board of Directors and is a member agency of the Metropolitan Water District of Southern California. West Basin operates the Edward C. Little Water Recycling Facility and three satellite locations. It is the largest treatment and water purification facility of its type providing nearly 40 million gallons of water each day to over 300 sites. West Basin utilizes various advanced treatment processes to produce five types of ?fit-for-purpose? waters used for commercial, industrial, and landscape purposes, including three ultra-pure waters. West Basin utilizes a contract operator to run the facilities. West Basin owns and operates over 100 miles of recycled water pipelines and supplies recycled water to customers for non-potable use. To expand the use of recycled water, the District assists customers with the process of converting their sites to utilize recycled water. In addition, the District conducts site inspections to ensure compliance with the safe use of recycled water. West Basin is an equal-opportunity employer, promoting diversity in its recruitment process and programs. The District is committed to customer service and seeks to provide its customers with the most qualified and exceptional professional services through those they employ while offering an excellent benefits package to its employees THE POSITION: West Basin is seeking an experienced Water Quality & Environmental Compliance Supervisor who thrives in a fast-paced and dynamic work environment, who is flexible to change, can prioritize and expedite tasks and provide excellent customer service to both internal and external customers. The Water Quality & Environmental Compliance Supervisor will organize and supervise a staff of professionals focused on the water quality/environmental compliance needs of West Basin, including overseeing various permit compliance and reporting. The desired incumbent will also ensure compliance with permits and regulation with attention to work quality and adherence to established West Basin policies and procedures. Under general direction, the Water Quality & Environmental Compliance Supervisor will manage and oversee the District?s water quality reporting and compliance programs; track and ensure the contract operators is providing data to the District; obtain complex permits; research, develop and recommend procedures and strategies to ensure compliance with federal and state environmental laws and regulations. This position will also ensure all reports to local, state and federal regulators are submitted on time in compliance with District operating permits for recycled water; respond to a variety of inquiries, questions, and issues; present to public or Board on occasion; respond to all water quality and compliance issues related to the operation of the recycled water facilities as well as District drinking water programs. Key responsibilities are: · Provides day-to-day leadership and supervises a diverse multi-disciplinary staff, providing a high performance, customer service-oriented work environment, and ensuing for timely delivery of required reports to local, state and federal regulators. · Leads division efforts towards obtaining new permits. · Manages program related to the environmental and regulatory requirements affecting District operations. · Develops strategies and creative solutions to complex permitting and environmental problems; effectively articulates and implements organizational goals and objectives. · Prepares detailed project plans and reports; conducts negotiations with federal, state and local regulators; and communicates sensitive water quality information with external agency representatives. · Prepares and delivers clear, well-organized, and interesting presentations to a wide variety of audiences having varying levels of technical knowledge; establishes effective and cooperative working relationships with governmental representatives, member agencies and the public. · Assesses environmental issues and determines compliance requirements; oversees large sampling plan with in-house and contract laboratories to comply with recycled water permits. · Assesses resource needs, establishes priorities and schedules, and directs staff and consultants to accomplish work requirements. · Supervises drinking water programs for purveyors in compliance with Title 22 standards; assists in the development of planning strategies and interpreting and directing compliance with District policies. · Plans, organizes, and supervises environmental compliance including hazardous material management, sewer discharge, air quality permitting, etc. related to the operation of recycled water facilities. · Performs environmental regulatory compliance auditing and reporting for the District. Serves as liaison to various regulators, such as the USEPA, State Water Resource Control Board, Regional Water Quality Control Board, Air Quality Management District, Department of Public Health, County Environmental Health, Sanitation Districts, Department of Toxic Substance Control, Local Fire Department?s and other federal, state and local environmental regulatory agencies and organizations. · Serves as the District liaison during environmental audits and inspections of the District?s operations and coordinates the District?s response to regulatory actions. · Review and research federal, state and local laws, statutes, regulations, rules, compliance orders and court decisions relating to environmental protection issues; write interpretations and recommend changes in compliance procedures and policies to comply with environmental regulations; coordinate the development of new operating procedures to maintain compliance. · Serves as an expert technical resource on environmental compliance issues; advises management on environmental compliance strategies and arranges for resources to address issues as necessary; responds to plant spills and other emergency situations; and supervises the preparation of all required reports. · Supervises and manages staff as well as contract operator?s compliance team for compiling, analyzing and reporting data and information to regulators related to recycled water, desalinated water and drinking water programs. · Manages and supervises reporting to state and local regulatory agencies to comply with Title 22 Standards, the National Pollutant Discharge System (NPDES), Industrial Stormwater Programs, Air Emissions Reporting, Hazardous Waste Reporting and Sewer Discharge Reports. · Supervises staff responsible for assuring QA/QC of water quality data reports, water quality laboratory contracts, invoicing, and budgets; oversees programs to maintain water quality databases, records, files and other information · Serve as a District representative in internal and external interactions related to water quality concerns between District customers and the Metropolitan Water District. · Responds to inquiries in a courteous manner; provides information within area of assignment; resolves complaints in an efficient and timely manner. · Works with staff to prepare and manage compliance and water quality program budgets. · Provides direction, management and supervision of assigned staff responsible for District compliance with water quality and environmental regulation standards. · Performs related duties as assigned. QUALIFICATIONS: The ideal candidate will have: · A Bachelor's degree from an accredited four-year college or university with major coursework in environmental science, environmental engineering, biology, chemistry, engineering, or a closely related field; AND six (6) years of progressively responsible environmental compliance experience related to water quality, including two years in a program management or supervisory capacity; or an equivalent combination of training and experience. A master?s degree in a closely related field is desirable. · California certification Grade 1 as treatment or distribution operator within one year of employment required. · Knowledge of advanced principles, theories, methods and techniques of environmental science, water resources management, and environmental protection; experience with laboratories, analysis, and QA/QC of water sampling. · Knowledge of local, state and federal laws and regulations pertaining to areas of assignment, including Clean Water Act and Title 22. · Knowledge of administrative principles and methods including goal setting, program development and implementation. · Knowledge of principles and practices of environmental compliance program administration, including permitting and reporting requirements. · Knowledge of principles and practices of sound business communication. · Knowledge of principles, practices and techniques of developing and administering contracts. · Knowledge of the District?s water recycling plant functions/operations and associated environmental compliance issues/requirements. · Knowledge of conflict resolution; methods and techniques of water treatment and distribution; general laboratory standards; research methods and analysis techniques. Ability to: · Plan, organize and coordinate the environmental compliance activities of a large, complex recycled water treatment and distribution system. · Prioritize and execute regulatory deadlines particularly during heavy reporting periods. · Understand laboratory functions including analysis of data and methods, analyze and make sound recommendations on complex compliance issues · Understand, interpret, explain and apply applicable environmental laws, regulations, policies and procedures related to the production of recycled water. · Collaborate effectively with District managers and external stakeholders to gain agreement and cooperation on environmental program provisions. · Analyze and resolve complex operational and regulatory problems, present proposals and recommendations clearly and logically in public meetings. · Prepare clear, concise and comprehensive correspondence, reports, studies and other written materials. · Exercise sound independent judgment within general policy guidelines; plan and organize work to meet changing priorities and deadlines. · Work independently in the absence of supervision; exercise tact and diplomacy in dealing with sensitive, complex and confidential issues and situations. · Operate office equipment including computers and supporting word processing, spreadsheet, and database applications. · Communicate clearly and concisely, both orally and in writing. · Establish and maintain effective working relationships with the District Board, management, staff, all levels of representatives of governmental and member agencies, the public and others encountered in the course of work. · Occasional after hour/weekend response may be required for urgent compliance matters. · Possession of a valid Class C California Driver's License, proof of insurance and an acceptable driving record are required at the time of appointment and as a condition of continued employment. Employee is required to use his or her own vehicle with mileage reimbursed at the standard IRS rate. SUPPLEMENTAL INFORMATION: There is one (1) vacancy currently available for this position. The salary range is $138,534 to $173,167 annually, depending on qualifications. This position is eligible for benefits. Application deadline: April 03, 2026. Apply online at: ___. For questions or additional information, please contact: West Basin Municipal Water District, Human Resources Department, 17140 S. Avalon Boulevard, Carson, CA 90746, (310) 660-6275. Email: ___ Supplemental Questions: 1. Briefly describe your experience working in organizations that treat and/or distribute recycled water, drinking water and/or wastewater., 2. Please describe your experience reporting for the Regional Board, Division of Drinking Water and other regulators you have worked with. What platforms of reporting did you utilize?, 3. Briefly describe your experience supervising compliance work and associated staff., 4. Please describe your experience with water quality laboratories, water sampling, and analysis., 5. Briefly describe your experience with any professional associations, committee participation and public speaking.

West Coast Arborists, Inc. a union company and industry leader in tree maintenance, is hiring Payroll Clerk to work at the corporate office in Anaheim. Provide general assistance to West Coast Arborists by coordinating the payroll functions with emphasis in quality control. WORK HOURS 8:00 a.m. to 5:00 p.m., Monday through Friday. SALARY RANGE Salary range is $22.75- $27.50 per hour DOE. COMPENSATION Health Insurance Dental Insurance - shared cost (50/50) Vacation Holiday Pay 401K Retirement Plan Paid Sick Time Credit Union Bonuses QUALIFICATIONS Education to include High School diploma with some college preferred. Must be data entry proficient and computer literate. Bilingual English/Spanish-required. Payroll and LCP Track experience preferred. REGULAR JOB DUTIES - All duties must provide excellent customers service, communication skills while maintaining confidentiality. Payroll/Data Entry: Review and edit requested payroll records using internal software program. Input time records weekly and as requested. Problem solves any discrepancies while maintaining accuracy and quality control. Payroll Clerical: Weekly payroll preparation and distribution. Address payroll related inquires and resolve discrepancies. Address requests from employees related to payroll. Administrative: Enter, update, and review employee information as requested/needed using internal software program, while maintaining confidentiality. Filing/Scanning: Maintain, organize, and update employee filing systems, including master files. Scan payroll and personnel documents and save to internal digital file system. Coordinator with other clerical duties and various administrative tasks as directed/necessary. Copying/Mailing: Sort weekly payroll checks and prepare for FedEx delivery and/or internal delivery. Other: Assists the Payroll Manager and Payroll SOFTWARE • Microsoft Outlook • Microsoft Excel • Microsoft Word • PayChex System CERTIFICATION/LICENSES RECOMMENDED • Valid Driver’s License POTENTIAL ADVERSE CONDITIONS Working on deadlines Ability to multitask in challenging environment with specific deadlines Interested candidates can apply online at and submit resume to Inquiries Hiring Coordinator at 800-521-3714 Tree Care Professionals Serving Communities Who Care About Trees Tags: Payroll, data entry, accuracy, filing, scanning, Paychex, communication skills, bilingual spanish, payroll preparation, clerical, LCP tracker, customer service. E.O.E.

You've Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you'll do exactly that. You'll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You'll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we're transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because "good enough" builds the past. You're here to build what's next, on a team that outperforms every norm. Visit us here to learn more about ?Accenture Infrastructure & Capital Projects () * You'll review and coordinate work conducted by environmental site assessment Master Services Agreement (MSA) contractors in the areas of: Phase I Environmental Site Assessment, Soils Disposition Evaluation (Compliance with Specification 01 4524), Soils Evaluations (applicability of SCAQMD) Rule 1466), Health/Safety Risk Assessment, Preliminary Environmental Assessment, Remedial Investigation / Feasibility Study, Public Participation Plan, Preparation and implementation of Removal Action Workplans / Remedial Action Plans, Poly chlorinated biphenyl survey and mitigation. * You'll assist in contract development and oversight of remediation contractors. * You'll establish and maintain project budgets, including contract management, and schedules pertaining to environmental investigations and remediation efforts. * You'll provide technical advice to Office of Environmental Health & Safety (OEHS) Management in terms of oversight of environmental site assessment contractors as well as contractor budget and schedule control. * You'll prepare and coordinate the environmental review process for individual projects with the Facilities Services Division ("Facilities") requirements for: Project scheduling, Budgeting, School design and construction, Emergency response, Waste disposal, Demolition. * Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships. $145,600 - $160,160 a year Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in Illinois, Minnesota, California, Colorado, District of Columbia, Maryland, New Jersey, New York or Washington as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply. HERE'S WHAT YOU'LL NEED: * Graduation from a recognized college or university with a bachelor's degree, preferably in Geology, Engineering or related field * Seven (7) years' full-time paid experience in management of environmental investigations and remediation conducted under the direction of the Department of Toxic Substances Control (DTSC) or comparable regulatory agency * Site investigation and remedial strategies; federal, state and local environmental regulations; DTSC, Regional Water Quality Control (RWQCB) and South Coast Air Quality Management District (SCAQMD) protocols Accenture is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Accenture and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with Accenture and have accommodation needs such as for a disability or religious observance, please call us toll free at 1 (877) 889-9009 or send us an email () or speak with your recruiter. Equal Employment Opportunity Statement We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity and Affirmative Action Policy Statement () Accenture is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women. Other Employment Statements Applicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States. Candidates who are currently employed by a client of Accenture or an affiliated Accenture business may not be eligible for consideration. Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process. Further, at Accenture a criminal conviction history is not an absolute bar to employment. The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Additionally, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information. California requires additional notifications for applicants and employees. If you are a California resident, live in or plan to work from Los Angeles County upon being hired for this position, please click here for additional important information. Please read Accenture's Recruiting and Hiring Statement () for more information on how we process your data during the Recruiting and Hiring process.

Pay rates starting at: $20.00 / hour plus cash incentives Crew member opportunities are available anytime: breakfast, lunch, late nights, and weekends. * Must be 16 years of age or older to work at McDonald's * Must be a legal U.S. citizen * Must have a California Food Handler Card verified by an accredited source (training provided at orientation) To be successful in this position, you'll need: * A humble and hospitable demeanor * Passion for helping and serving others (customers and fellow team members) * A desire to learn and grow * The ability to communicate effectively and anticipate customer needs. Job Description & Responsibilities: This role is vital in the restaurant because you'll: * Work different positions and master station skills (grill, drive-thru, guest experience) with opportunity to move into management * Lead the experience: Connect with customers to ensure they have a positive experience * Have a side of smile: Help customers order their favorite McDonald's menu items and/or make menu recommendations * Focus on the food: Prepare all of McDonald's World Famous food * Ensure a memorable visit: Help maintain a welcoming, friendly, and clean restaurant environment * Understand that teamwork is key: Work hand in hand with your team to meet goals and most importantly, have fun! * Free employee meals - Applicable immediately before, during or after shifts * Free uniforms - 2 sets of uniforms provided at orientation * Flexible scheduling - Choose the hours that work for you * College tuition assistance - Up to $2500/year for eligible employees * High School Diploma Program - Earn your HS Diploma at your pace and at no cost through Career Online High School * English Under the Arches - Improve your English skills for FREE through our ESL Classes * Education & Career Advising - Schedule 1-on-1 advising sessions, available in both English and Spanish * Colorado Technical University - Earn a 100% tuition-covered college degree through our partnership with CTU * Leadership development program - Growth opportunity and on-the-job skills training classes * Celebrations - Employee recognition events, birthday and anniversary celebrations * Company awards - Contests and prizes (Employee of the Month, drive-thru contests, anniversary awards) In accordance with California law, we also provide paid sick time to eligible employees. The MPMC McDonald's Organization is a locally owned McDonald's franchise serving the San Gabriel Valley since 1967. We operate 13 store locations in Pasadena, Altadena, Arcadia, Temple City, Rosemead, El Monte, Duarte, Irwindale, Pico Rivera, and Monrovia. We care about our employees and that's why we provide them with an opportunity to learn, grow, and succeed every day. By offering industry-leading education programs and world-class training, we provide opportunities that inspire confidence and foster valuable skills to help employees thrive wherever they are on their journey, whether they stay at McDonald's or go elsewhere. A Crew Team Member at McDonald's is more than just a paycheck - it's a chance to gain life skills and grow as an individual. And for anyone willing to take advantage of these opportunities...we're committed to becoming America's Best First Job. See a day in the life of a Crew Team Member at McDonald's: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin or ancestry, sex, gender, gender expression, sexual orientation, pregnancy, age, marital status, veteran status, physical or mental disability status, genetic information, citizenship or any other class characteristic protected by federal or applicable state law. We will ensure that individuals with disabilities are provided reasonable accommodation(s) to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact the restaurant you are applying to request accommodation(s). This job posting is for a position in a restaurant owned and operated by an independent franchisee, not McDonald's USA. This franchisee owns a license to use McDonald's logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald's USA. Thus, if you are hired for the job described in this posting, the franchisee will be your employer, not McDonald's USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald's USA has no control over employment matters at the restaurant. McDonald's USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired. This job posting contains some general information about what it is like to work in this restaurant but is not a complete description of all duties of the job. People who work in this restaurant perform a number of different tasks every day and this posting does not list every essential function of the job. Requsition ID: PDX_MC_184CFB6E-9C89-4666-A5F9-A73BA9580A87_15492 McDonald's Corporation and McDonald's USA, LLC (the "Company") are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee of the Company, including any corporate-owned restaurant, on the basis of age, sex, sexual orientation, race, color, creed, religion, ethnicity, national origin, alienage or citizenship, disability, marital status, veteran or military status, genetic information, or any other legally-recognized protected basis under federal, state or local laws, regulations or ordinances. Applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. A reasonable accommodation is a change in the way things are normally done that will ensure an equal employment opportunity without imposing an undue hardship on the Company. Please contact if you need assistance completing any forms or to otherwise participate in the application process or to request or discuss an accommodation in connection with a job at the Company or at a McDonald's corporate-owned restaurant to which you are applying. McDonald's and its franchisees are taking proactive steps in response to the COVID-19 outbreak to ensure the safety in our restaurants across all communities. Our values of quality, service, and cleanliness continue to guide us. We're following direction from the CDC, state, and local governments and adhering to our deep cleaning procedures in every restaurant, every day. We also fully support employees who stay home from work if they are feeling sick. Read more about the ways we are prioritizing health at . McDonald's and its franchisees are always looking for top candidates and encourage you to apply online. If you have any questions, please first call the restaurant as this will help the restaurant comply with any social distancing guidelines or other compliance obligations. For corporate roles, please proceed to the online application, or if you already applied, contact @us.mcd.com. There may be a short delay in response time while we continue to monitor the impacts of COVID-19. We sincerely thank you for your continued trust in the Golden Arches. /

Alliant International University is a professional practice University committed to excellence in four areas: Education for Professional Practice, Scholarship, Multicultural and International Competence, and Community Engagement. The University provides students with the highest quality of education through excellence and innovation in academic scholarship, applied training and research, and community service, particularly to underserved populations. Through its Mission, the University's goal is to equip students with the competencies they need to effectively practice in the professional setting, provide public benefit and make an impact in their communities by addressing major contemporary social issues. Our Mission:Alliant International University prepares students for professional careers of service and leadership and promotes the discovery and application of knowledge to improve the lives of people in diverse cultures and communities around the world. Our Vision:An inclusive world empowered by Alliant alumni. Our IMPACT Values: • Inclusion:We value and engage the rich diversity of the Alliant community., • Mentoring:We provide guidance and create enabling environments for success., • Passion:We bring enthusiasm, creativity, and authenticity to our work., • Accountability:We act with integrity and responsibility in all we do., • Communication:We are responsive, transparent, and respectful in our interactions., • Teamwork:We collaborate to develop innovative solutions for our community. Application Instructions: • All individuals interested in being considered for an Adjunct position, now or in the future, must submit the following items:, • Resume/CV, • Transcript (of your highest degree obtained), • Three (3) professional references Application Description: Applicants to this position will be considered for a candidate pool encompassing one or more of the subject areas outlined in the job description. This pool will be used to identify qualified candidates for potential appointments during the 2025-2026 academic year. The California School of Management and Leadership (CSML) has a long history of more than 35 years with an alumni base spread globally. Graduates from our programs are employed in diverse industries, disciplines and positions in several types of organizations in more than 50 countries around the world. CSML is known for multicultural and multinational education to a student population with diverse backgrounds. Stalwarts such as Dr. Igor Ansoff and Dr. Efraim Turban laid the conceptual foundation of the school's academic mission in preparing tomorrow's global leaders. CSML concentrates on professional practice, applied theory and contemporary techniques. Our goal is to educate individuals who will go out into the world to accomplish great things in the communities around the world they serve. The Management School is in growth mode and plans to continue to grow the ground programs, expand in the online modality, as well as expand geographically to Alliant's other California campuses. The programs have a strong global dimension with many of the professors and students having a global background coming from different countries and having worked abroad. This multiculturalism is thoroughly integrated into the classes at CSML. Students benefit from having an accomplished cohort- many who are working professionals or international students and/or former US military. This experience creates a network that enhances the student learning environments in their programs and in co-curricular activities. Many of our doctoral students publish either by writing books or conference papers or journal articles, which further enhances their professional stature. The school offers programs at the Masters and Doctoral levels. Los Angeles Campus - MSDA- STEM - Master Science Data Analytics Program CSML is seeking qualified part-time instructors to teach in our STEM MSDA Master Science Data Analytics courses in our LA campus. Specifically, we are looking for candidates who can teach the following courses: • Foundations of Data and Decision-Making Algorithms, • Database Design Principles and Technologies, • Management and Marketing Models for Managerial Decision Making, • Essentials of Computational Science Using Python, • Data Analytics for Decision Making, • Basic Applied Statistics, • Technology Tools for Managerial Decision Making, • Advanced Programming with Python, • Architectures and Methods for Data Mining, • Big Data Tools Starting Salary: $32 hourly. You can learn more about CSML by visiting the Alliant web site at___. If you are interested in joining our team of experts or have other questions about our program, please contact us at___. CSML continually seeks subject matter experts to join our cadre of adjunct faculty. The following are the duties, responsibilities, skills and qualifications that Alliant requires from applicants for an Adjunct professor position: Pedagogical & Academic Skills: • Facilitating Classroom and Distance/Distributed Learning, • Course and syllabus preparation, • Class curriculum coordination and planning, • Assessment and evaluation of learners, • Mentoring and advising students, • Holding office hours and meeting with students, • Research/scholarship mentoring and supervision, particularly of MS theses, STEM projects, and PhD, EdD, DBA dissertations Skills: • Proficient computer skills, including proficiency with Microsoft Office programs., • The ability to work independently and be self-motivated., • High level of accuracy and attention to detail and the ability to solve problems., • The ability to explain complex requirements in clear and concise terms., • The ability to be flexible with workflow to meet the needs of the department and students and to manage multiple tasks by required deadlines., • The drive to encourage, direct, hold accountable and guide candidates toward task completion., • Must demonstrate the ability to work as an effective team member and develop trusting relationships with students and Alliant employees, as well as the Registrar's Office and various academic departments., • Culturally competent and ability to communicate and interact effectively with diverse people., • Highly motivated, focused and results oriented., • Ability to exercise discretion and tact in all interpersonal interactions, and to maintain confidentiality., • Collaboration and partnering with other university stakeholders to support candidate success., • Ability to make administrative/procedural decisions and judgments. Technical & Subject Matter Expertise: • Advanced knowledge of data analytics, statistical modeling, and data-driven decision-making., • Expertise in machine learning, artificial intelligence, and predictive modeling., • Proficiency in data wrangling, data preprocessing, and feature engineering., • Strong command of programming languages commonly used in analytics (e.g., Python, R, SQL, Julia)., • Experience with big data technologies (e.g., Hadoop, Spark, Databricks)., • Proficiency in data visualization tools (e.g., Tableau, Power BI, matplotlib, ggplot2)., • Expertise in statistical software and libraries (e.g., scikit-learn, TensorFlow, PyTorch, SAS, SPSS)., • Familiarity with cloud platforms for analytics (e.g., AWS, Azure, GCP)., • Knowledge of database management systems, data warehousing, and ETL pipelines., • Understanding of data governance, data ethics, and privacy regulations (e.g., GDPR, HIPAA). Minimum Requirements: • Education:Master's, Doctoral or other terminal degrees from an accredited college or university, depending upon the needs of the course being taught., • Experience: 5 years' appropriate industry experience in the areas(s) of specialization and expertise required. Background Check Requirements: Employment is contingent upon successful completion of a background check (including criminal, prior employment and education verification). Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current University employees who apply for the position. Additional Information: Anti-Discrimination Policy: Alliant International University prohibits unlawful discrimination, harassment or retaliation in its educational programs, services and activities, and in employment practices, including but not limited to internal promotions, training, opportunities for advancement, terminations, relationships with outside vendors, use of contractors and consultants, and in its admission or access thereto, on the basis of race, ethnicity, national origin or descent, color, creed, religion, sex, age, marital status, disability (including physical, disease, psychiatric or psychological disability), medical condition, pregnancy, veteran status, sexual orientation, gender identification or expression, hair style or texture associated with race, or any other characteristics protected by applicable law. Alliant International University is an Equal Opportunity Employer, committed to ensuring a high quality of education through the diversity of the University community and the curriculum. Women, people of color, people with disabilities and people from other underrepresented groups are encouraged to apply, as we actively seek to increase diversity at all levels. The University will conduct its programs, services and activities consistent with applicable federal, state and local laws, regulations and orders. Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. Applicants with disabilities and applicants who require assistance completing an application may contact Human Resources at___or 858-635-4509. The California Consumer Privacy Act (CCPA) requires that we provide you with this ______.This notice is about the collection and use of your personal information.We encourage you to read this notice carefully. Governing legislation: Titles VI and VII of the Civil Rights Act of 1964, the Civil Rights Act of 1991, Title IX of the Education Amendments Act of 1972, Section 504 of the Rehabilitation Act of 1973, the Americans with Disabilities Act of 1990, the Age Discrimination Act of 1975, the regulations implementing these statutes, and applicable federal and California law. Alliant International University is a smoke and tobacco free environment. Company: Alliant International University, Inc. | Job ID: 283826

Alliant International University is a professional practice University committed to excellence in four areas:Education for Professional Practice, Scholarship, Multicultural and International Competence and Community Engagement.The University provides students with the highest quality of education through excellence and innovation in academic scholarship, applied training and research, and community service, particularly to underserved populations.Through its Mission, the University's goal is to equip students with the competencies they need to provide public benefit and make an impact in their communities by addressing major contemporary social issues.Core competencies of the University's training programs include cultural diversity, which is infused in courses and field placements and is manifest in the diversity of its students, faculty. Our Mission: Alliant International University prepares students for professional careers of service and leadership, and promotes the discovery and application of knowledge to improve the lives of people in diverse cultures and communities around the world. Our Vision: An inclusive world empowered by Alliant alumni. Position Summary: Adjunct Faculty for the Marketing - MBA Program, under the direction of the Program Director of MBA, provides on campus instruction, guidance, and support to CSML students at the Los Angeles Campus for the following courses: • Marketing Management in the Digital Age, • Marketing Research and Data Analytics, • Digital and Social Media Sales and Marketing Each course has a duration of 8 weeks with 1 additional week for the instructor to prep and 1 additional week for grading. The course meets one day a week for 4 hours or is in the executive format. Starting Salary:$36 an hour. Minimum Qualifications: Education: Master's, Doctoral or other terminal degree from an accredited college or university, depending upon the needs of the course being taught. Experience: 5 years of appropriate experience in the areas(s) of specialization and expertise required for candidates with a master's degree. Two (2) years of appropriate experience in the area(s) of specialization and expertise required for candidates with a doctoral degree. Certifications, Licenses, etc.: None. Skills: • Proficient computer skills, including proficiency with Microsoft Office programs., • The ability to work independently and be self-motivated., • High level of accuracy and attention to detail and the ability to problem solve., • The ability to explain complex requirements in clear and concise terms., • The ability to be flexible with workflow to meet the needs of the department and students and to manage multiple tasks per required deadlines., • The drive to encourage, direct, hold accountable and guide candidates toward task completion., • Must demonstrate the ability to work as an effective team member and develop trusting relationships with students and Alliant employees, as well as the Registrar's Office and various academic departments., • Culturally competent and ability to communicate and interact effectively with diverse people., • Highly motivated, focused and results oriented., • Ability to exercise discretion and tact in all interpersonal interactions, and to maintain confidentiality., • Collaboration and partnering with other university stakeholders to support candidate success., • Ability to make administrative/procedural decisions and judgments. Duties & Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Facilitating Classroom and Distance/Distributed Learning, • Course and syllabus preparation, • Class curriculum coordination and planning, • Assessment and evaluation of learners, • Mentoring and advising of students, • Holding office hours and meeting with students Supervisory Responsibility: Direct Reports: Program Director, Master of Business Program (MBA). Indirect Reports: None. Contact Responsibility: Internal: Interacts with Program Director, Campus Director and Academic Program Coordinator to receive support and guidance throughout the instructional term. Main communication is between Adjunct Faculty and currently enrolled candidates. External: None. Primary Work Location, Hours & Travel Requirements: Office Location: Los Angeles Campus. Work Hours: N/A. Travel: None. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work environment is in a standard office setting. Frequently exposed to low to moderate noise, various odors, temperature changes, and equipment with moving parts, including but not limited to computers, phones, printers, and other standard office equipment. Physical Requirements: Ability to execute those physical activities required to perform the essential functions including, but not limited to, regular sitting and being mobile; continual communicating; regular keyboarding; regular reading of both print and digital material; and all other activities required to perform essential functions. Compliance: • Responsible to perform all work in a manner that complies with the organization policies, applicable regulations, applicable standards of professional performance, or other recognized laws or requirements as these policies, regulations, standards, laws or requirements relate to the position., • Responsible to participate and support in the organizational compliance activities and to take appropriate action in reporting issues related to compliance., • Responsible to perform all duties and responsibilities in a manner that complies with the Alliant International University Mission, Values, and Pillars, if applicable. Background Check Requirements: Employment is contingent upon successful completion of a background check (including criminal, prior employment and education verification). Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current University employees who apply for the position. Additional Information: Anti-Discrimination Policy: Alliant International University prohibits unlawful discrimination, harassment or retaliation in its educational programs, services and activities, and in employment practices, including but not limited to internal promotions, training, opportunities for advancement, terminations, relationships with outside vendors, use of contractors and consultants, and in its admission or access thereto, on the basis of race, ethnicity, national origin or descent, color, creed, religion, sex, age, marital status, disability (including physical, disease, psychiatric or psychological disability), medical condition, pregnancy, veteran status, sexual orientation, gender identification or expression, hair style or texture associated with race, or any other characteristics protected by applicable law. Alliant International University is an Equal Opportunity Employer, committed to ensuring a high quality of education through the diversity of the University community and the curriculum. Women, people of color, people with disabilities and people from other underrepresented groups are encouraged to apply, as we actively seek to increase diversity at all levels. The University will conduct its programs, services and activities consistent with applicable federal, state and local laws, regulations and orders. Applicants must currently be authorized to work in the United States on a full-time basis. Offers of employment are contingent upon the presentation of documents that demonstrate a person's identity and authorization to work in the United States, which are consistent with the provisions of the Immigration Reform and Control Act. Applicants with disabilities and applicants who require assistance completing an application may contact Human Resources at___or 858-635-4509. The California Consumer Privacy Act (CCPA) requires that we provide you with this ______.This notice is about the collection and use of your personal information.We encourage you to read this notice carefully. Governing legislation: Titles VI and VII of the Civil Rights Act of 1964, the Civil Rights Act of 1991, Title IX of the Education Amendments Act of 1972, Section 504 of the Rehabilitation Act of 1973, the Americans with Disabilities Act of 1990, the Age Discrimination Act of 1975, the regulations implementing these statutes, and applicable federal and California law. Alliant International University is a smoke and tobacco free environment. Company:Alliant University Country:United States of America State/Region:California City: Alhambra Postal Code:91803 Job ID:273133

Job Description Western Truck Exchange is looking for a Master Diesel Foreman to lead in rebuilding and growing our service department. We need a hands-on diagnostic leader who can bring structure to the shop floor: diagnose trucks correctly, map the repair path, dispatch work to the right technician, and drive quality and accountability—so our Service Manager can focus on customer relationships and bringing in more work. This role is the communication hub between technicians, advisors, and parts, ensuring repairs are completed properly, efficiently, and safely. Compensation & perks * Competitive pay: $100,000–$120,000/year (DOE). * Profit sharing plan. * Quarterly incentive opportunities. * Paid training. * Employee referral bonus. * CDL reimbursement support (as applicable for renewals/endorsements). * A real leadership seat: you’ll help rebuild systems and standards, and you’ll see your impact immediately. Core ResponsibilitiesDiagnostics Leadership (Hands-On) * Perform advanced diesel engine diagnostics and electrical troubleshooting * Triage incoming commercial truck repair work * Assign jobs based on technician skill level * Provide coaching and hands-on support to technicians * Improve first-time-fix accuracy Shop Operations and Dispatch * Own workflow and daily communication between technicians, service advisors, and parts * Run daily production meetings (10–25 minutes) * Monitor open repair orders, promised times, and parts availability * Walk the floor regularly to remove bottlenecks * Adjust priorities in real time Quality Control and Documentation * Final review and sign-off on repair orders * Confirm documentation accuracy and proper road testing * Enforce a no-comeback mindset * Ensure technician notes clearly document root cause and repair Parts, Warranty, and Shop Standards * Coordinate with Parts on warranty and core returns * Maintain a safe and organized shop environment * Ensure diagnostic tools and shop equipment accountability Team Leadership and Staffing * Support technician recruiting, interviewing, and onboarding * Coach and develop Diesel Technician * Participate in performance management and staffing decisions * Build a high-performing commercial truck repair team AI-Enabled Diagnostics * Utilize modern diagnostic software and AI-assisted diagnostic tools * Improve troubleshooting speed and root-cause accuracy * Apply strong mechanical judgment and safe repair practices Required Qualifications * Valid Class A CDL (or willing to obtain if not currently held). * 5+ years of medium/heavy-duty truck repair experience. * Strong technical knowledge and diagnostic problem-solving ability. * Strong communication and organization skills; ability to lead and support technicians. * Ability to road test vehicles as needed to diagnose and verify repairs. * Ability to speak Spanish fluently. Strongly Preferred * Familiarity with OEM and warranty processes and dealership operations. * Comfort driving workflow discipline: clear documentation, daily planning, and real-time floor management. * Familiarity with CDK. Who We Are At Western Truck Exchange, we believe our people are the driving force that keeps our customers — and the trucking industry — moving forward. That’s why we foster a culture of respect, appreciation, and opportunity, recognizing every employee’s contribution to our shared success. Western Truck Exchange is the leading retailer of used and new medium-duty commercial trucks in Los Angeles. Established in 1922, we’re one of California’s oldest licensed dealerships—and we’re proud to be an International dealership with a service team focused on doing the job right, safely, and professionally. We are fully certified for CAT and Cummins repairs, and qualified to provide Allison maintenance and rebuild services. We’re always looking for motivated, hardworking professionals who are passionate about helping fleets stay on the road and businesses keep moving. Whether in sales, service, or parts, teamwork drives everything we do — and it’s what allows us to deliver for our customers, every time. If you’re ready to bring your skills to an industry where reliability matters most, we’d love to hear from you. We are an equal opportunity employer and prohibit discrimination/harassment in accordance with applicable laws.

Job Description Company Overview Born in San Diego in 2007, Club Pilates has expanded across the nation, bringing Pilates to hundreds of thousands of people. We serve up over eight million workouts each year to our dedicated members…and we’re just getting started. Pure to Joseph Pilates’ original Reformer-based Contrology Method, but modernized with group practice and expanded state-of-the-art equipment, Club Pilates offers high-quality, life-changing training at a surprisingly affordable price. We believe that Pilates is the path to a fuller, more satisfying physical existence. We believe that being in control of your body helps you to be in control of your life. And best of all, we believe that you can start anytime. Job Summary The ideal Manager will oversee all Studio functionality including managing and growing multiple streams of revenue, new member acquisition and retention, and staff management and development. Responsibilities and Duties • Lead generation including grass roots marketing and networking, • Implement sales process to schedule prospects into Intro class, • Membership sales, • Manage staff schedule, • Directly coordinate with all vendors, ensuring that studio retail/products are stocked with accurate inventory counts, • Supervise Sales Representatives, • Hire/Manage all instructors at the studio, • Proficiency in ClubReady, to include revenue reports, attendance reports, etc., • Review instructor evaluations performed by Master Trainers, • Independently make decisions related to high level customer service, • Collect out-standing dues, • Maintain cleanliness and organization of the Pilates Studio, • Enforce Club Pilates policies and procedures, • Ensure all forms, administrative supplies, and studio literature is stocked and visible, • Schedule and participate in networking/community events and studio promotions, • Strategically manage marketing campaigns to generate leads for the studio, • 2+ years of fitness or relevant sales experience., • Experience in the Fitness Industry preferred, • Confident in generating personal sales and training Sales Reps in sales, • Ability to manage and drive 4 revenue streams: memberships, retail, private training, and teacher training, • Must be fluent in English and have excellent communication and strong interpersonal skills in person, on the telephone and via email, • Ability to excel in a fast changing, diverse environment., • Ability to recognize areas of improvement and make changes using good judgement., • An affinity and passion for fitness., • Solid writing and grammar skills., • Highly organized, proficient in data management, ability to prioritize and meet deadlines., • Professional, punctual, reliable and neat., • Strong attention to detail and accuracy., • Trustworthy and ability to handle confidential information., • Ability to work harmoniously with co-workers, clients and the general public., • Proficiency with computers and Studio software. Benefits and Perks • Base salary based on experience & performance: $18 to $30 per hour, • Commission paid on sales, • Opportunity to bonus, based on performance gW9cMlieIW

Production scheduling, Master production scheduler, Planner, Mrp, Inventory management, aerospace, manufacturing industry, Production planning, Supply chain, Sap, Erp, Inventory, Schedule planning, Planning scheduling, Production control, Materials management, Inventory control. The role is responsi

Job DescriptionDescription: About Us: Unis accelerates logistics success with our Transportation Management System that offers unparalleled control, visibility, and adaptability. Unis strives in elevating our employees and operations toward new heights of excellence. As client’s partner with us, we focus on more than just a business relationship; it's an opportunity to unlock a world of value-added services that will enhance operational standards and elevate success by unifying our clients’ supply chain networks through superior technology, assets, and information services. Job Description Purpose and Scope: • The General Manager is responsible for the operation and financial performance by providing strategic direction and leadership for all warehouse activities associated with shipping, receiving, warehouse and inventory management, • Leading the development of a high-performance work environment., • Full P& L responsibility, process management and customer Relations., • Manages all warehouse activities including receiving, storing, picking, and shipping materials., • Reviews, analyzes, modifies, and implements efficient and effective department processes, policies, and procedures., • KPI measurement implementation includes labor control, inbound/outbound metrics, and inventory., • Ensures the physical condition of warehouse and equipment are properly maintained., • Effectively manages the budget and P&L of the operation., • Partners with engineering to implement and maintain proper layout of warehouse and product placement., • Performs quarterly and/or annual physical inventories; provides inventory reports., • Partners with the customers to maintain a high level of customer satisfaction by providing consistent communication and following up on customers’ concerns and requests., • Identifies, documents, and implements opportunities for continuous improvement., • Maintains a working knowledge of all operating systems pertaining to the work area., • Hires, trains, supervises, motivates, and develops warehouse staff; manages schedules and workflow., • Assigns duties and monitors quality of work; assures staff conforms to organizational policies and procedures and government regulations including TAPA, AIB, and OSHA., • Keeps up to date on team activities, identifying problem areas and taking corrective actions., • Performs other related duties as required and assigned by management. Requirements: Required PPE: • Strategic thinking and planning skills., • Understanding of budget management and financial monitoring., • Excellent leadership skills, including goal setting, motivating, training and mentorship., • Exceptional interpersonal and communication skills, including writing, speaking and active listening., • Effective conflict resolution and problem-solving skills., • Good organization and time management., • Comfortable in a fast-paced or high-pressure environment. Education/ Training: • Bachelor's degree in business administration, Economics, Finance, Logistics or Transportation., • High proficient in MS Office, Excel, Word, and PowerPoint., • Minimum 10 years of management experience in Third Party Logistics (3PL) required. BENEFITS • Medical insurance, • Dental insurance, • Vision insurance, • Paid Time Off #ZR DISCLAIMER: EQUAL EMPLOYMENT OPPORTUNITY POLICY Unis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race (including traits historically or culturally associated with race, such as hair texture and protective hairstyles), religion (including religious dress and religious grooming), color, age (40 and over), genetic information, disability (mental and physical), medical condition (as defined under state law), national origin (including language use restrictions and possession of a driver’s license issued under section 12801.9 of the California Vehicle Code), ancestry, sex (including gender, gender identity, gender expression), sexual orientation, marital status, familial status, parental status, domestic partner status, citizenship status, pregnancy (including perceived pregnancy, childbirth, lactation, or pregnancy-related conditions), military caregiver status, military status, veteran status, or any other status protected by federal, state, or local law. Unis complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Unis expressly prohibits any form of unlawful employee harassment or discrimination based on any of these protected categories. The duties and responsibilities described above are not a comprehensive list and additional tasks may be assigned. The scope of the job may change as necessitated by business demands.

Reviews master production schedule with Production Control Manager. Compiles reports concerning progress of work and downtime due to failures of machines and equipment to apprise production planning personnel of production delays. Oversees production control functions when supervisor is unavailable.

Job Description Company Profile: At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: • Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others., • Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious., • Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt., • Passion for Positivity: We greet each day with warmth and possibility. In the role of Assistant General Manager (“AGM”), you will be responsible for bringing our mission, values, and competencies to life for our guests and Team Members in our restaurants. You will partner with the General Manager and Area Leader in the establishment of store action plans, financial metric results, and the development of hourly Team Members in the restaurant. You will be responsible for supporting the General Manager in the overall restaurant operations at an exceptional level including but not limited to schedules, forecasting, labor management and inventory. As an AGM, you will be expected to learn and master competency-based leadership and operational skills. What You’ll Do: • Assist the General Manager in managing daily restaurant operations, including opening and closing procedures., • Ensure adherence to CAVA’s standards for food quality, service, and cleanliness., • Oversee inventory management, supply ordering, and cost control to maintain profitability., • Supervise and support Team Members with training, coaching, and performance feedback., • Support the General Manager with scheduling and staffing., • Assist with addressing Team Member issues and conflicts to maintain a positive work environment., • Enhance the guest experience by upholding high service standards and promptly addressing customer concerns., • Implement strategies to help with boosting customer satisfaction and loyalty., • Lead by example in customer service and encourage the team to follow suit., • Support with managing financial aspects including tracking sales, cash handling, and adhering to budget guidelines., • Assist with preparing financial reports, analyze performance metrics, and identify areas for improvement., • Assist with ensuring accurate financial record-keeping and compliance with cash handling procedures., • Assist with overseeing food safety practices and ensure team training on proper procedures., • Assist with administrative tasks such as inventory management and maintaining operational records., • Support the General Manager in report preparation and action plan implementation., • Participate in special projects and initiatives to drive restaurant success and support the General Manager as needed., • Assist with any additional duties as assigned by the General Manager or higher management. The Qualifications: • 1- 2 years of experience in a supervisory or management role within the restaurant or hospitality industry., • Strong leadership and team management skills., • Excellent communication and interpersonal abilities., • Proven track record of delivering exceptional customer service., • Adapt to changing circumstances and develop solutions to enhance restaurant performance., • Ability to manage financial aspects, including budgeting and cost control., • Knowledge of legal, health, safety, and sanitation regulations., • Ability to adapt to a fast-paced environment and solve problems effectively., • Flexibility to work various shifts, including nights and weekends, as needed., • Consistently exhibits a generous and friendly demeanor when engaging with guests., • Completes tasks and projects within established timelines., • Promotes and upholds a culture of inclusivity and respect within the team., • Actively seeks and incorporates feedback from team members to improve performance and operations., • Applies effective decision-making skills to guide the team towards achieving success., • Remains open to and actively explores new ideas to drive business success., • The ability to regularly work overtime, • Must be able to bend and reach overhead often, • Must possess dexterity to handle tongs, pots/pans, and other equipment, • Must be comfortable working in temperatures ranging from hot to cold, • Must be comfortable working near open flames, • May be required to work in tight spaces, • Must maintain near constant communication with multiple people, • Close vision, distance vision, and peripheral vision are required, • Must be able to sit, squat and kneel occasionally, • Must be able to work in a constant state of alertness and safe manner, • May be required to occasionally work in outdoor weather conditions, • May stand for long periods of time and lift up to 50 pounds What We Offer:, • We’ve got you covered. Here are just some of the benefits available to CAVA team members:, • Early Wage Access*, • Health, Dental, Vision, Telemedicine, Pet Insurance plus more!*, • 401k enrollment with CAVA contribution*, • Paid sick leave, parental leave, and community service leave*, • FREE CAVA Meal for every shift worked, • The opportunity to be on the ground floor of a rapidly growing brand *indicates eligible qualifying positions This job description is not intended to be a comprehensive list of all the duties and responsibilities of the position, and such duties and responsibilities may change without notice. As an equal opportunity employer, CAVA considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state, or local law. CAVA – joining “a culture, not a concept”

Production Chemist Clinical Torrance, California, US Shift: Monday-Friday 8-5pm, with occasional shift to 2nd (2pm-10pm) Must have : 1 year of HPLC Responsibilities: * Perform purification process by chromatography, crystallization and other techniques, and in-process test method * Follow approved GMP manufacture directions such as Master Batch Records, Standard Operation Procedures, Standard Test Procedures and other procedures to manufacture GMP materials, perform in-process test, package the product including other related activities * Perform project-planning and initiate raw material order-request. Receive raw materials, coordinate with QA/QC and Material Management for material release and monitor raw material inventories * Install, test equipment, operate and maintain equipment for manufacturing and in-process testing. The equipment includes analytical HPLC and prep HPLC system, Lyophilizes, balances, reactors, HF cleavage equipment, diafiltration systems, water purification systems, oven, washing systems and others used in manufacture * Develop processes for purification of chemicals other than peptides * Follow and maintain GMP Documentation System. Investigate any process deviation and write process deviation report. Initiate document change request. Help quality control and assurance unit to maintain equipment calibration program * Routinely maintain/organize work areas (Hood, bench, floor, wall, etc.) and other designated areas at the manufacturing facility * Develop peptide-manufacturing processes including peptide/protein purification by chromatography, crystallization, and other techniques, and in process test methods * Assist QA/QC for monitoring raw material inventories * Write Standard Operation Procedures, Standard Test Procedures, Master Batch Records and other related GMP documents * Follow SOPs and approved directions to clean equipment used in GMP processes, maintain cleaning log for each equipment, assist in equipment calibration program, and dispose chemical waste generated in the manufacture * Monitor compliance of Maintenance and Cleaning procedures of equipment and instruments used in GMP processes by periodically reviewing and signing off on maintenance and cleaning log for each equipment Requirements: * BS degree in Chemistry or related field * 1-5 years' work experience * Experience with HPLC and chromatography * May work with hazardous materials and chemicals * Excellent written and oral communication skills * Basic computer knowledge, including Microsoft Word, Excel and PowerPoint * Ability to effectively organize, multitask, and work in a fast-paced, deadline driven work environment * Ability to communicate in a proactive and solution-focused manner, including keeping management aware of potential issues. * Detail oriented with the ability to troubleshoot and resolve problems * Ability to work independently and manage one's time * Communicate effectively and ability to function well in a team environment * Flexibility of working hours based on business needs, may include some nights and occasional weekends We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist Software Engineer Job Code: 35496 Job Location: Anaheim Ca Schedule: 9/80 Summary: Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Specialist Software Engineer shall lead a small software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. Essential Duties: * Development and integration of software projects for existing and new products. * Interpret customer specifications to define requirements for software design. * Provide software technical leadership for the software developer team members. * Perform requirement analysis and software coverage analysis for software code base. * Compose software use case and review test procedures for validation and verification of software development. * Capture and document existing software products to meet qualification standards at highly regulated and safety critical government contracts. * Ability to work simultaneously on a variety of projects. * Reviews project progress and help with earned value reporting. Recommend corrections in technical approach to maximize efficiency of engineering resources. * Responsible to lead and operate Agile sprint/Kanban team, sprint planning, Jira ticket-based workflow management, and tracking toward team deliverable objectives. * Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining. * Support activity effort estimation in development of software bid and proposals. * Support new programs from conceptual design, through detail design to completion. * Provides expert guidance with a variety of software engineering concepts, practices, and procedures * Coordinate directions from Project and/or System Engineering Department Manager. Qualifications: * Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment. * Or a Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience. * Or in lieu of a degree, minimum of 10 years of prior related experience. * Ability to obtain and maintain a secret/security clearance. * Expertise in embedded real-time systems software design. * Experienced in object and service-based software architectures, a plus. * Experienced in embedded C and C++ programming. * Expertise with communication protocols, such as RS-232, RS-485, and Ethernet. * Proven effective communication with Senior Project Management and customer representatives is essential. Preferred Additional Skills: * Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred. * Design familiarity with control systems and power conversion concepts is highly preferred. * Knowledge of power electronics and analog circuits, a plus. * Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers * Knowledge of Python or C-Sharp is beneficial. In compliance with pay transparency requirements, the salary range for this role in California is $97,000- $180,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-BR2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English () or Spanish () . For information regarding your Right To Work, please click here for English () or Spanish () .

Specialty/Competency: Operations Industry/Sector: Not Applicable Time Type: Full time Travel Requirements: Up to 60% At PwC, our people in operations consulting specialise in providing consulting services on optimising operational efficiency and effectiveness. These individuals analyse client needs, develop operational strategies, and offer guidance and support to help clients streamline processes, improve productivity, and drive business performance. In connected supply chain at PwC, you will focus on optimising supply chain operations and improving end-to-end visibility and collaboration. You will work closely with clients to analyse supply chain processes, identify areas for improvement, and develop strategies to enhance efficiency, reduce costs, and increase responsiveness. Working in this area, you will provide guidance on technology and data analytics to create a connected and agile supply chain network. Focused on relationships, you are building meaningful client connections, and learning how to manage and inspire others. Navigating increasingly complex situations, you are growing your personal brand, deepening technical expertise and awareness of your strengths. You are expected to anticipate the needs of your teams and clients, and to deliver quality. Embracing increased ambiguity, you are comfortable when the path forward isn't clear, you ask questions, and you use these moments as opportunities to grow. Examples of the skills, knowledge, and experiences you need to lead and deliver value at this level include but are not limited to: * Respond effectively to the diverse perspectives, needs, and feelings of others. * Use a broad range of tools, methodologies and techniques to generate new ideas and solve problems. * Use critical thinking to break down complex concepts. * Understand the broader objectives of your project or role and how your work fits into the overall strategy. * Develop a deeper understanding of the business context and how it is changing. * Use reflection to develop self awareness, enhance strengths and address development areas. * Interpret data to inform insights and recommendations. * Uphold and reinforce professional and technical standards (e.g. refer to specific PwC tax and audit guidance), the Firm's code of conduct, and independence requirements. Minimum Degree Required : Bachelor Degree Required Fields of Study : Accounting, Economics, Business Administration/Management, Health Administration, Industrial Engineering Minimum Years of Experience : 3 year(s) Degree Preferred : Master of Business Administration Certification(s) Preferred : American Production and Inventory Control Society (APICS), APICS CSCP, APICS CPIM, ISM CPSM, ISM CSM, or ISC CPSD Preferred Knowledge/Skills : Demonstrates thorough abilities and/or a proven record of success in: * Designing and implementing Kinaxis technology to drive measurable results in industry or consulting environments; * Understanding demand planning and forecast development, impact of forecast accuracy on inventory levels, manufacturing costs, transportation costs, warehousing costs and customer service; * Demonstrating ability to present complex supply optimization analytics in simple supply chain cost and performance terms; and, * Demonstrating experience in quantitative analytical and problem-solving skills in addition to critical thinking and the ability to manage details in context of the overall supply chain performance. Demonstrates thorough abilities and/or a proven record of success as a team leader including: * Understanding of capabilities of Kinaxis planning and control tower tools; * Understanding the components of a demand planning process including: maintenance of demand data, statistical forecast, customer input process, internal input process, execution; * Planning demand and supply for CPG manufacturing, Industrial Products, Paper and Pulp and Pharma Life Science; * Managing Inventory management including tiered inventory levels and cost optimization with respect to customer service performance; * Optimizing of supply plans consistent with overall corporate objectives; * Understanding key performance indicators, roles and responsibilities and tools that support sales and operations planning processes (S&OP); * Assessing current supply planning processes and systems, and identifying opportunities to improve fulfillment of the demand plans while achieving inventory objectives across the tactical and strategic horizons; * Developing and implementing of supply chain network planning, material planning and capacity planning optimization (Processes/People/Systems); and, * Understanding and executing global inventory management The salary range for this position is: $77,000 - $202,000. Actual compensation within the range will be dependent upon the individual's skills, experience, qualifications and location, and applicable employment laws. All hired individuals are eligible for an annual discretionary bonus. PwC offers a wide range of benefits, including medical, dental, vision, 401k, holiday pay, vacation, personal and family sick leave, and more. To view our benefits at a glance, please visit the following link: As PwC is an equal opportunity employer, all qualified applicants will receive consideration for employment at PwC without regard to race; color; religion; national origin; sex (including pregnancy, sexual orientation, and gender identity); age; disability; genetic information (including family medical history); veteran, marital, or citizenship status; or, any other status protected by law. PwC does not intend to hire experienced or entry level job seekers who will need, now or in the future, PwC sponsorship through the H-1B lottery, except as set forth within the following policy: . Learn more about how we work: For only those qualified applicants that are impacted by the Los Angeles County Fair Chance Ordinance for Employers, the Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, San Diego County Fair Chance Ordinance, and the California Fair Chance Act, where applicable, arrest or conviction records will be considered for Employment in accordance with these laws. At PwC, we recognize that conviction records may have a direct, adverse, and negative relationship to responsibilities such as accessing sensitive company or customer information, handling proprietary assets, or collaborating closely with team members. We evaluate these factors thoughtfully to establish a secure and trusted workplace for all. Applications will be accepted until the position is filled or the posting is removed, unless otherwise set forth on the following webpage. Please visit this link for information about anticipated application deadlines:

Division: San Diego Project Location(s): San Diego, CA 92101 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt * This position is for a full-time traveling assignment supporting projects across the United States. We are looking for project experience within Aviation/Airports, Data Center, Pharmaceutical/Life Sciences, Healthcare, Industrial/Manufacturing, and EV/Battery/Renewables market segments. * Position Description: Leads, directs and coordinates the work of subcontractors and/or Turner trade labor with regard to the Mechanical and Electrical systems included in the project. Responsible for ensuring safety, schedule delivery, quality of work performed and adherence to budget of the project. The Superintendent Mechanical-Electrical has supervisory responsibility for Assistant Superintendents, Field Engineers, Interns and trade labor in his/her area of responsibility. Reports to: Senior Project Superintendent, Project Superintendent, Project Manager or MEP Manager Essential Duties & Responsibilities: Specifically relating to the mechanical and/or electrical systems (e.g. HVAC, Plumbing, Electrical, Low Voltage, Fire Sprinkler): • Managing and making decisions related to the performance of work related to scheduling, delivery, logistics, quality control and trade employee staffing levels., • Managing work among assigned trades to promote a coordinated project operation. Resolving local area problems regarding procedures, precedence, design clarifications, adequate labor and equipment, schedule and all other appropriate matters., • Managing the overall site safety program as required and ensuring subcontractor compliance with Turner standards and all applicable safety codes and regulations., • Supervising and developing Assistant Superintendents, Field Engineers and/or interns, as assigned, including providing input on or completing performance appraisals., • Ensure strict adherence to ethics and compliance requirements at all times., • Creating schedules and determining sequencing of work. Developing and implementing recovery strategies to maintain project schedule and budget., • Communicating with owners and architects/engineers in connection with field issues. Investigating and resolving such issues., • Managing the billing process as it relates to work in place and overseeing the monthly estimate of work completed, payrolls, material invoices and subcontractor payment applications., • Managing the work to ensure that it is installed in compliance with and conforms to the approved contract documents., • Working with the Engineer on the coordination effort for all mechanical and electrical systems, equipment and piping layouts for all trades on a master coordination set of drawings and 3D model securing the approval of the architects and engineers., • Leading project inspections, startup, commissioning, turnover and training process, and punchlist required for acceptance and handover of all the systems., • Coordinating, directing, and monitoring the activities of subcontractors and suppliers, to insure conformance with plans, specifications, local and national codes., • Reviewing project changes in conjunction with the Project Engineer., • Keeping detailed daily records of MEPS trade contractors' work progress., • Participating in preconstruction efforts (e.g. constructability, logistics)., • Other duties, actions, and responsibilities as assigned. The salary range for this position is estimated to be 130,000.00 - 190,000.00 USD annualized. Qualifications: • Bachelor's degree with a minimum four (4) years of formal superintendent experience and a minimum of six (6) years of mechanical/electrical/plumbing construction experience required, or an equivalent combination of education, training and/or experience., • Knowledge of building construction, means and methods, scheduling and cost control procedures, general contract, general conditions, subcontract documents, drawings and specifications., • Specific knowledge of Mechanical and Electrical Systems., • Thorough knowledge of building information modeling and its use in coordination of the Mechanical and Electrical systems and other project systems., • Proven written and verbal communication abilities; proficiency with computer applications, including Microsoft Office suite., • Ability to read, understand and interpret contract documents, drawings, specifications, scopes of work and project schedule., • Demonstrated leadership and interpersonal skills. Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 75 pounds. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. *May perform other duties as assigned. #LI-SC1 Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Avionics Operations Supervisor (Strategy, Analytics, and Planning). The Production Control Scheduling team is responsible for developing, monitoring, and fulfilling a Master Schedule to meet the part demands of Avionics customers, including launch manifest and development hardware. Avionics Operatio

Job Description JOB DESCRIPTION Departments Distribution * Record inventories and quantities of linen ready for delivery * Utilize handheld devices to create shipping routes for the service department * Appropriately stages linen carts for delivery * Prepare, review and place linen orders, log linen distribution, and run and prepare linen distribution reports * Loads and unloads carts of linen * Sort and place linens on racks, shelves, or in carts according to organizational distribution standards * Prepare departmental exchange carts as needed * Maintain a safe and clean work environment by keeping customer orders, linen carts, racks, and work stations neat: Organize neatly packed linen carts and assures cleanliness of cart * Meets established productivity standards * Follow directions and safety precautions * Maintain logs and records of units produced including a record of errors resulted in rejected or discarded pieces * Notifies Distribution Team Leader if problems are impacting the ability to meet production standards * Comply with all company policies and procedures * Must maintain regular and punctual attendance * Perform other duties as assigned Flat * Place washed wet/damp linens into a bin (cart) near production lines * Separate linen into proper categories (account, item, material, color, garment tag, etc.) * Feed and operate press machinery while inspecting for any defects in linen * Place linens in an automated stacker or conveyor * Place garments onto metal hangers * Hang garments on conveyor for processing * Assist with changeovers as needed * Sort and fold linen for final finishing * Cover all clean linen at the end of the shift * Observe flat press machinery for linen jams and miss folds * Notifies Flat Team Leader if problems are impacting the ability to meet production standards * Maintain a clean, safe, and orderly work area * Meet established productivity standards * Follow directions and safety precautions * Comply with all company policies and procedures * Must maintain regular and punctual attendance * Perform other duties as assigned Garment * Create delivery routes for the service department * Process new customer information and their orders * Must follow customer’s request on approved Garment Request Form * Operate sewing machine to repair defects such as tears and holes in garments, linens, and other material per customer’s request * May shorten or lengthen hems to alter size of garments * May sew identifying labels and emblems on uniforms and linens as instructed * May repair defective stitching on garments * Sort finished garments according to customer requests * Ensure daily accuracy and productivity of work for inventory control * Maintain a clean, safe and orderly work area * Meet established productivity standards * Follow directions and safety precautions * Maintain logs and records of units produced including a record of errors resulted in rejected or discarded pieces * Notifies Distribution Team Leader if problems are impacting the ability to meet production standards * Comply with all company policies and procedures * Must maintain regular and punctual attendance * Perform other duties as assigned Soil Sorter * Manually opens bags containing soiled linen * Accurately weighs sorted linen in carts/bags to note the weight * Must sort, count, tag, and list soiled linens in Spindle screen in their designated work station * Send linen via vacuum air system in their assigned station * Move soiled linen to the conveyor to be sorted by type * Sort linen by hand to identify and separate by type * Pick up and place linen in the appropriate bins * Report any instruments, sharp items, and other foreign objects in linens to Soil Team Leader * Completely clean and disinfect soil sorting area at end of shift * Inspect each linen for tears, stains, and holes * Maintain a clean, safe and orderly work area * Meet established productivity standards * Follow directions and safety precautions * Complies with all company policies and procedures * Must maintain regular and punctual attendance * Performs other duties as assigned Washer * Select appropriate wash formulas based on the degree of soiled linen, load size, and fabric * Inspect linens throughout shift to ensure the proper pH level is maintained in the washers * Must perform spotting procedures to remove stains utilizing a variety of special chemicals * Monitor use of all chemicals used in a washroom process, ensuring proper amounts of chemicals are on hand for each load be washed during a shift * Has complete understanding of wash-overs and the process * Responsible for satisfactory and timely completion of assigned linen according to schedule * Safely and properly uses detergents and adheres to all safety precautions * Report equipment/cleaning product needs and/or malfunctions to Washroom Team Leader * Have a process understanding of the tunnels and the material that comes out * Maintain a clean, safe and orderly work area * Meet established productivity standards * Follow directions and safety precautions * Complies with all company policies and procedures * Must maintain regular and punctual attendance * Performs other duties as assigned This job description is not intended to be all-inclusive and employees will also perform other duties as assigned by management as needed. An employee is not entitled to work in one specific department and can be changed departments at any time. Some departments may require you to do repetitive lifting and bending over 50 pounds. Republic Master Chefs reserves the right to revise or change job duties and responsibilities as the need arises. This job description does not constitute a written or implied contract of employment

Job DescriptionDescription: The Data Management Coordinator owns the input of data as defined by the IBP data framework, with a focus on data quality through an end-to-end process, from entry of new items, to review of master data at the global level. This role assists in the preparation of reports to support inventory analysis conducted by the Manager, Inventory Control & Data Management. Essential Job Functions • Accountable for creation of new products and accuracy of data attributes within the data governance framework, • Accountable for on time maintenance of all life cycle management changes, • Responsible for education and awareness of all business functions of the importance of data governance, • Accountable to maintain the cadence of review of master data per the data governance framework for accuracy of all functional business data, • ERP, DRP, MRP master data experience, NetSuite ERP and Blue Ridge a plus, • Excellent written/oral communication, • Ability to learn and adapt with a continuous improvement mindset, • Strong planning and organizational skills with a sense of priority for deadlines and attention to detail, with a complimentary ability to recognize and react to changing work demandsRequirements:, • Bachelor’s degree preferred, • 1 to 2 years of relevant supply chain operations, or data and process management, or inventory experience preferred, • Proficiency with Excel (pivot table, VLook ups)

Job Description Gavin de Becker & Associates (GDBA) protects the world's most influential and at-risk public figures. Founded in 1978 by 3-time Presidential appointee, Gavin de Becker, our firm's Protectors, Analysts, and Investigators are committed to our mission of protecting human life through the assessment, prediction, and management of violence. GDBA's Mission: The Safety, Privacy, and Wellbeing of our Clients A newly hired Protector in Los Angeles will earn no less than $81,000 in base earnings during their first year with GDBA. Los Angeles-based Protectors could earn up to $100,000 in first year earnings when accounting for prior relevant experience, GDBA Training Academy performance, and promotion opportunities. Who You Are: We are actively seeking high-performing athletes and fitness training professionals where physical readiness, mental discipline, and precise decision-making matter. GDBA incorporates physical fitness standards into its selection process and our deployment of anti-assassination strategies each and every day. Many applicants that possess the following skill sets and professional certifications have gone on to have successful GDBA careers: • Collegiate / Professional Athletes (All sports welcome), • Certified Personal Trainers - NASM, ACE, ISSA, NCSF, ACSM, • Military Fitness Trainers - Master Fitness Trainer (Army, Navy, Air Force), Force Fitness Instructor (Marine Corps), • Bodybuilders - NPC, OCB, NFF, IFBB, • Pilates / Yoga Instructors, • Olympic Powerlifters Your Role as a Protector: • Monitor property while utilizing the tools and technology of a GDBA Command Center, • Screen visitors and vendors; control all access to protected site, • Coordinate and execute security plans and respond to medical emergencies, • Provide physical protection and logistical support at clients' homes and when they travel, • Provide secure transportation as needed, • Survey and prepare (advance) locations prior to arrival of client, • Prepare detailed documentation of suspicious activity, • 12-Day Introductory Training Academy in San Antonio, TX, • Be able to pass physical readiness test (Pull-ups, Push-ups, Sit-ups, 800m run), • Must be able to swim, • Must be drug and nicotine free, • Background check required, • $15,000 employer contribution for First-Year Associates, • $3,000 employer contribution each year thereafter GDBA will consider for employment qualified applicants with criminal histories in a manner consistent with the Fair Chance laws and ordinances respective to the applicant's position; applicants are to take note, criminal background checks are required for this position, per L.A. County Code § 8.300.050; L.A. Municipal Code § 189.07 (City of Los Angeles); Bus. & Prof. Code § 7583.23 (CA Firearms Permit); 18 U.S. Code § 922 (Firearms - Federal); 34 U.S. Code § 41106 (Private Security Officers).

Job DescriptionJOB ANNOUNCEMENT: DENTAL CAREER APPRENTICESHIP Position Title: Paid Extern: Dental Clinical & Business Operations Starting Pay: $20.00 per hour Location: All Zak Dental Southern California Locations Forget the Lecture Hall. Start Your Career Today. Are you looking for a career that offers more than just a paycheck? At Zak Dental, we believe the best professionals are built through hands-on experience, not just textbooks. We are a family-owned, multi-specialty dental group that has served Southern California for over 30 years. We are seeking disciplined, high-achieving individuals who want to skip the student loans and dive directly into a high-demand, AI-resilient healthcare career. The Opportunity: A Dual-Track Apprenticeship This is a paid, entry-level externship designed for candidates with zero prior dental experience. Unlike traditional schools, we provide the training, mentorship, and financial sponsorship for your required dental certifications and licensing. You will master two essential sides of the industry: 1. Clinical Excellence (The Art of Care) * Assist dentists and specialists during complex procedures. * Learn to take high-quality dental records and x-rays. * Master clinical workflows, sterilization, and infection control. * Directly support patient comfort and wellness. 2. Business Operations (The Science of Success) * Insurance Billing: Understand the mechanics of healthcare finance and claims. * Sales & Case Presentation: Learn how to communicate treatment plans effectively. * Case Acceptance: Master the interpersonal skills required to help patients say "yes" to their health. Requirements We hire for character and train for skill. To be considered, you must meet the following: * Education: High School Diploma or GED. * Proven Discipline: A minimum cumulative GPA of 3.0 or equivalent, demonstrating your reliability and strong work ethic. * Mindset: You must be dependable, punctual, and highly coachable. * Commitment: An interest in building a long-term career in healthcare. Benefits & Growth * Comprehensive Training: Full on-the-job clinical and business training. * Professional Sponsorship: We pay for your certifications and licensing. * Full Benefits: Medical Insurance, Dental Insurance, Paid Time Off and Holidays. * Career Path: Clear advancement opportunities through our Wellness32 Program. Apply today to launch your hands-on healthcare career with Zak Dental.

Job Description General Description of Duties The R&D Product Development Manager analyzes and oversees the improvements on all product development projects which includes any new and/or existing products by utilizing existing and/or new raw materials. Matches products supplied by customers and internal personnel from competitors. Calculates costing and suggested selling prices on all products developed. Directs the evaluation and testing of prototypes. Assists in the organization of all product development projects with other managers and leads within the department. Supervises and guides the work of all R&D Product Development Chemists as well as Lab Technicians. This individual must maintain a positive working relationship with internal departments such as Quality Control, Analytical and Production and all other inter and intra-company lab personnel regarding resources, production, Q.C. procedures and analytical testing requirements, as well as behaving and communicating in ways that foster good relationships with those outside the company, while achieving and enhancing performance standards. Essential Job Functions • Manages and overseas all product development within the department originates and/or develops new and/or existing products which include Juice Concentrates, Flavors Based and/or Beverage Bases per defined customer or in-house requirements with little to no direction or instructions., • Supervises, creates and/or provides direction, guidance and any needed support to the R&D Staff., • Determines feasibility of certain projects based on production capacity, technology, equipment, and any other potential limitations., • Performs cost analysis and suggests selling prices on all work performed by the department., • Reviews to ensure Master Formulas and compounding instructions are sufficiently documented as needed., • Reviews and approves all product specification sheets., • Contacts customers technical staff to determine customers' requirements with regard, • to product development and ensure that developed products meet or exceed customer's needs and application., • Ensures that all products developed meet SQF (Safe Quality Food) requirements., • Provides technical assistance and support to customers and AFF Sales Staff., • Provides on-site technical support to customers for first time productions and/or any required trouble shooting assistance., • Monitors the transition of all new, first-time productions from the lab to production to ensure product quality. Requirements • Minimum B.S. in Food Science Technology or Nutrition and/or related/equivalent degree., • Minimum 4 years supervisory and/or management experience and some supervisory/ management training., • Must demonstrate taste/aroma sense acuity., • Proficient with Microsoft Office Suite; good math skills up to algebra., • Must have effective written and verbal English communication skills., • Must report to any AFF facility according to company need. Primary reports-to our San Fernando facility. Company DescriptionAFF manufactures custom juice and flavor blends for a wide variety of industrial users worldwide. Companies come to us for the latest and best ingredient blends and flavor systems for their products. In business over 50 years, we have two manufacturing plants and a distribution warehouse in Southern California. On April 1, 2016, American Fruits and Flavors was acquired by Monster Energy Company which expanded American Fruits and Flavors’ resources, significantly. American Fruits and Flavors, LLC is an equal employment opportunity employer and does not discriminate in hiring or employment upon any basis prohibited by law, including race, color, creed, religion, age, sex, national origin, cancer, genetic characteristics, genetic information, pregnancy, ancestry, sexual orientation, marital status, veteran status, or disability. None of the questions or information sought in this application is intended to discriminate based upon any status protected by law. Compensation Range: Actual salary/hourly wages are determined upon a variety of factors such as level of experience, skills, education and /or certifications, location, and position level **AFF manufactures custom juice and flavor blends for a wide variety of industrial users worldwide. Companies come to us for the latest and best ingredient blends and flavor systems for their products. In business over 50 years, we have two manufacturing plants and a distribution warehouse in Southern California. On April 1, 2016, American Fruits and Flavors was acquired by Monster Energy Company which expanded American Fruits and Flavors’ resources, significantly.\r\n \r\nAmerican Fruits and Flavors, LLC is an equal employment opportunity employer and does not discriminate in hiring or employment upon any basis prohibited by law, including race, color, creed, religion, age, sex, national origin, cancer, genetic characteristics, genetic information, pregnancy, ancestry, sexual orientation, marital status, veteran status, or disability. None of the questions or information sought in this application is intended to discriminate based upon any status protected by law.\r\nCompensation Range: Actual salary/hourly wages are determined upon a variety of factors such as level of experience, skills, education and /or certifications, location, and position level **

Job DescriptionDescriptionWe are seeking an exceptional Diesel Truck Chassis Master Mechanic to lead our service team. This senior-level position requires extensive expertise in all aspects of heavy-duty diesel truck repair, diagnostics, and the ability to mentor junior technicians. Key Responsibilities • Diagnose and repair complex diesel engine problems including electronic fuel systems, turbochargers, and emissions controls, • Perform advanced diagnostics on transmissions, differentials, and drivetrain components, • Troubleshoot and repair sophisticated electrical systems and multiplexed networks, • Execute complex brake system repairs including ABS, air disc brakes, and electronic stability control, • Repair and rebuild suspension systems, steering components, and air ride systems, • Lead diagnostic efforts on difficult or unusual repair scenarios, • Mentor and train junior mechanics and apprentices, • Perform comprehensive DOT inspections and ensure regulatory compliance, • Review and approve work performed by other technicians, • Maintain manufacturer certifications and stay current with evolving technologies, • Provide technical support and guidance to service advisors, • Estimate repair costs and timeframes for complex jobs Skills, Knowledge and Expertise Required Qualifications • Minimum 7-10 years experience as a heavy-duty diesel mechanic, • Multiple ASE Master Technician certifications (T-series required), • Comprehensive knowledge of all major truck brands and systems, • Expert-level proficiency with diagnostic software and scan tools, • Proven track record of complex problem-solving and troubleshooting, • Strong leadership and communication skills, • Ability to read wiring diagrams, technical service bulletins, and schematics, • Valid driver's license with clean record, • Own comprehensive set of professional tools Preferred Qualifications • ASE Master Heavy Duty Truck Technician certification, • CDL Class A or B license, • Manufacturer-specific certifications (Cummins, Detroit, Paccar, etc.), • Experience with alternative fuel systems (CNG, electric, hybrid), • Welding and fabrication capabilities, • Previous shop foreman or lead technician experience, • Technical school degree or equivalent Benefits • Premium compensation: $38-$49/hour based on experience and certifications, • Fully paid health insurance, • 401(k) retirement plan, • Paid time off, sick leave, and holidays, • Company-provided uniforms and safety equipment, • Opportunities for advancement Work Environment • Full-time position with consistent schedule, • Monday through Friday, • Collaborative team environment with experienced professionals, • Clean, organized, well-lit facility

Job Description Who We Are Our Education team partners with K-12 school districts, community colleges, and universities to design and manage transformative programs that align with their goals. We partner with institutions on projects including: • Modernization and expansion of facilities, • Infrastructure improvements for safety and sustainability Position Description: • Lead a construction team in accordance with district and program policies and procedures for College construction bond operations, • Train team on all PMO policies and procedures, • Follow and successfully execute program Quality Management System, • Report and collaborate with Program Management Office on all project matters, • Review and develop contract documents, • Plan, Organize, direct, coordinate, and report performance of College Project Management team and construction projects, • Identify risk and create risk mitigation plans successfully, • Documents and reports all project data accurately and in a timely manner, • Create and present project and college data clearly to multiple stakeholder groups, • Successfully manage and execute 5 to 10 projects simultaneously, ranging in construction value and complexity from $5M to $100M each, • Successfully delivering construction projects on schedule and within budget, • Coordination of budget and schedule information with the Relocation Project Manager regarding FF&E, Asset Disposition/Surplus, and Relocation, • Review all deliverables from designers in the different design phases. While in construction, the Project Manager will review the construction change documents (CCD’s) and provide written comments to the Design Team prior to submittal to DSA., • Successfully closeout projects to include DSA closeout and PMO/District closeout, • Tracks all project status and provides management reports relative to overall program relative to construction project delivery schedules, • Tracks status and provides management reports relative to scheduling, cost control, staffing and other related construction contract requirements, • Reviews and inspects construction site offices to assess performance of construction teams and adherence to legal requirements, • Reviews recommended actions in resolving disputes relative to construction projects, • Directs and assists in outreach efforts to provide information about college projects, • Performs other related duties as assigned, • 7+ years experience in Management of multiple construction projects; experience within a large capital improvement program and familiarity with relevant Public Codes, • 2 years experience in Educational Facility Construction, • BA or BS in Architecture, Engineering, Urban Planning, Construction Management or a closely related field. Additional qualifying experience in excess to the minimum stated above may be substituted for the required education on a year for year basis., • Experience with Division of the State Architect (DSA) construction/design processes or similar, • Knowledge of all parts of the project life cycle, to include master planning, design and closeout, • Experience utilizing Building Information Modeling (BIM), • Experience in various delivery methods including design bid build, design build, lease-leaseback, • Experience with using a web based project management system such as Proliance and/or Procore., • OSHA-10 certification (required within 1 month of hiring), • Experience in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS), • Experience in Formal Construction Partnering, • A valid Certificate of Registration as an Architect by the California Architectural Board or Professional Engineer by the California State Board for Professional Engineers and Land Surveyors, • A valid Construction Manager (CCM) credential by the Construction Manager Certification Institute (CMCI) Harris fosters a collaborative work environment, understanding that diverse perspectives enhance our ability to better serve our clients and their communities. We are deeply passionate about our work, our clients, our team’s personal and professional growth. We offer a mentorship program, on-the-job training, Harris University, and an annual staff summit all aimed at developing well-rounded consultants proficient in the full spectrum of services we provide. Additionally, we prioritize a healthy work-life balance and organized social and team building events. Compensation & Benefits The annual salary range offered for this position is $140-175K. Actual pay offered will be dependent on the experience and expertise of the incoming candidate. In addition to base salary, we also offer: • Medical, dental, vision, and life insurance, • ESOP, • 401K Match, • PTO, 8 Paid Holidays + "1 WorkAversary" paid holiday to celebrate you!, • Health & Well-Being Allowance, • Tuition reimbursement, • Paid Leave Programs such as maternity, parentally, and family medical leave Harris & Associates is an Equal Opportunity Employer (EOE AA M/F/Vet/Disability) and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Harris expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. #LI-ONSITE Powered by JazzHR 6Q2YGlfgJ2

Job Description Summary: A Quality Control (QC) Supervisor for dietary supplements oversees the daily inspection and testing of products and materials to ensure they meet stringent industry regulations and company standards. This includes enforcing the FDA's Current Good Manufacturing Practices (cGMP) for dietary supplements (21 CFR Part 111) and managing the team of QC technicians who perform the test. Duties and Responsibilities: • Supervise QC team: Lead, train, and manage QC technicians and inspectors on day-to-day tasks. Conduct performance reviews, provide feedback, and coordinate work schedules., • Manage inspection and testing: Oversee the inspection of incoming raw materials, in-process goods, and finished products. This involves physical, chemical, and organoleptic (taste, odor, color) testing., • Enforce cGMP compliance: Ensure all QC activities, documentation, and processes adhere to the strict requirements of 21 CFR Part 111., • Control non-conformance: Direct the investigation of non-conforming products and deviations from specifications. Lead root cause analysis and implement corrective and preventive actions (CAPA)., • Handle product disposition: Manage the "hold and release" process for raw materials and finished products within the company's system. Authorize the acceptance, rejection, or rework of materials based on test results., • Maintain documentation: Ensure all quality tests, inspections, and activities are thoroughly documented. Review and approve Master Manufacturing Records (MMRs) and other relevant paperwork., • Support audits and inspections: Assist with internal and external audits, including those from the FDA or third-party certifiers. Act as a point of contact during inspections., • Oversee lab operations: For supervisors in lab settings, manage the use, maintenance, and calibration of analytical instruments like HPLCs. Conduct and document stability testing on products. · Minimum of 3 years’ relevant work experience in quality control laboratories or related field within the food, dietary supplement, or pharmaceutical industry, including at least 1 year supervisory or leadership experience. · Knowledge of QC methodologies, laboratory testing techniques, and the use of analytical instruments. Experience with quality management systems (QMS) and enterprise resource planning (ERP) software is often preferred · Excellent leadership, communication, and problem-solving skills to effectively manage a team and collaborate with other departments. Education Requirements: · BA Degree or equivalent in relevant scientific fields (chemistry, Food Science, Microbiology...ect) is preferred. · PCQI and or HCAAP certification preferred. Work Environment: · The work environment characteristics described here represent those an employee encounters while performing this job's essential functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts, fumes, or airborne particles and risk of electrical shock. · The noise level in the work environment is usually moderate. · While in the plant, the employee must utilize the required personal protective equipment. Physical Demands: · The physical demands described here represent those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Physical demands require sitting and walking for extended periods of time, bending, reaching, carrying. Specific vision abilities required by this job include close vision, peripheral vision, and the ability to adjust focus. While performing the duties of this job, the employee is required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear.

Job Description Ready to take your finance career to the next level? We’re hiring a Regional Assistant Controller – Americas to oversee financial operations for multiple entities within our parent company’s Measurement Systems (MS) division, including DTS, DSI, and VPG Canada. This role goes beyond traditional accounting—it’s a chance to lead cross-border finance teams, support strategic decision-making, and drive operational excellence across a dynamic, multi-entity environment. If you're ready to bring your financial expertise to a role with real influence, we want to hear from you. Summary The Regional Assistant Controller/Americas is responsible for overseeing the Finance Department activities for the US Region Measurement Systems companies (DTS, DSI, VPG Canada) as well as assisting the Regional Controller regarding the management of regional finance activities. Oversees the financial operations and performance of assigned regional branches, including but not limited to managing financial data, presenting insights to regional and global management, developing budgets, ensuring regulatory compliance, and leading finance teams within the region. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Additional responsibilities and requirements may be added or changed at any time with or without notice. Responsibilities and Duties include but are not limited to: • Provides financial and accounting support to the Regional Controller by overseeing the financial operations and performance of assigned regional branches. Ensures the accuracy of financial data and reports., • Provides finance administration support, including but not limited, by coordinating budging processes, monitoring expenses, analyzing financial data for insights, and developing forecasts., • Prepares and presents accurate, timely financial statements, reports, and analyses to regional and/or global leadership. Effectively communicates with various stakeholders, including regional and global teams., • Supervises, leads, and develops site finance and accounting teams, fostering high performance, and managing staff development., • Implements and enforces financial policies and procedures, monitor internal controls, and ensure compliance with applicable regulations, including GAAP and SOX., • Provides financial recommendations to management, supports strategic decision-making, and contributes to achieving regional and organizational goals. Recommends process improvements as needed., • Oversees regional audit and internal controls functions. May serve the primary liaison between external auditors and regional finance team by managing the flow of information and responding to inquiries., • Perform other related duties and responsibilities as requested by Regional Finance management. Experience and Skills: To perform this job successfully, an individual must be able to perform the Responsibilities and Duties satisfactorily. The qualifications and skills listed below are representative of the knowledge, skills, and/or abilities for the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential duties and responsibilities of this job. • Bachelor’s or Master’s degree with emphasis in finance, accounting, or similar discipline and significant related experience (approx. 5+ years) encompassing finance, accounting, financial planning, reporting and analysis in a manufacturing, multi-location/company, or public entity environment; or an equivalent combination of education and experience is necessary. CPA certification is strongly desired., • Working knowledge in GAAP accounting and cost accounting. Previous experience working with an ERP system. Experience using SYSPRO is a plus., • Previous supervisory experience as well as the ability to lead/manage a finance team, in person and remote, at various locations utilizing strong analytical, reasoning, interpersonal communication, problem-solving, and conflict resolution skills is necessary., • Demonstrated ability to appropriately address and document details, simultaneously manage multiple tasks, meet deadlines, and collaborate effectively with other individuals/departments is necessary. The ability to effectively communicate, verbally and in writing, in a professional, diplomatic manner is also necessary., • Demonstrated proficiency using MS Outlook, Excel (advanced level), Word, and Powerpoint as well as, the ability to learn and master other essential software products, such as SYSPRO. Why Join DTS? For six consecutive years, DTS has been recognized as one of the “Best Places to Work”—and for good reason. We believe happy, empowered employees lead to exceptional customer outcomes. Here's what we offer: • Competitive base salary and performance bonus structure, • Flexible work schedules, • Six paid company holidays plus the final week of the year off (paid), • Free on-site EV charging stations, • Comprehensive medical, dental, and vision insurance, • Employer-paid life insurance, • Voluntary insurance plans including accident and critical illness coverage, • Tuition and training assistance The estimated salary range listed below allows for candidates with various levels of skill and experience to be considered, as well as room for growth achieved within the role over time. Offers extended to a candidate will be based upon their unique set of knowledge, skills, education, and experience as well as internal equity. $140k - $165k annualized Work Environment, Physical Demands, and Equipment Use This position works in an environment in which safety, environmental and health concerns may demand constant attention. The work environment is a production and engineering area and typical business office. The employee is frequently required to stand, walk, sit, and have the ability to lift and carry up to 50 lbs. Occasional US and/or international travel to customer, vendor, corporate, and/or other sites may be necessary based on business or customer needs. Company DescriptionDATA ACQUISITION SYSTEMS & SENSORS Headquartered in Seal Beach, CA, DTS has been a leading manufacturer of data acquisition systems and sensors for occupant safety testing and product testing in automotive, aerospace, biomechanics, blast, and in-dummy applications. DTS specializes in advanced measurement solutions that require high-speed, miniature, rugged DAS and sensors for critical tests in extreme environments. We sustain a culture of hard-working and highly motivated teams that move the company forward within the fields of automotive, aerospace, and sports injury prevention on a global scale. As of June, 2021, DTS joined the Vishay Precision Group (VPG) family of companies. VPG is a global leader in precision measurement sensing technologies. For more information about DTS, please visit our website - . ITAR Statement: This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. Equal Opportunity Statement: DTS is committed to a diverse and inclusive workplace. We are proud to be an Equal Opportunity Employer and make employment decisions without regard to race, religion, sex/gender, sexual orientation, age, disability, veteran status, or any other characteristic protected by federal, state, or local regulations.DATA ACQUISITION SYSTEMS & SENSORS\r\nHeadquartered in Seal Beach, CA, DTS has been a leading manufacturer of data acquisition systems and sensors for occupant safety testing and product testing in automotive, aerospace, biomechanics, blast, and in-dummy applications. DTS specializes in advanced measurement solutions that require high-speed, miniature, rugged DAS and sensors for critical tests in extreme environments.\r\n\r\nWe sustain a culture of hard-working and highly motivated teams that move the company forward within the fields of automotive, aerospace, and sports injury prevention on a global scale. \r\n\r\nAs of June, 2021, DTS joined the Vishay Precision Group (VPG) family of companies. VPG is a global leader in precision measurement sensing technologies.\r\n\r\nFor more information about DTS, please visit our website - Statement:\r\nThis position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.\r\n\r\nEqual Opportunity Statement:\r\nDTS is committed to a diverse and inclusive workplace. We are proud to be an Equal Opportunity Employer and make employment decisions without regard to race, religion, sex/gender, sexual orientation, age, disability, veteran status, or any other characteristic protected by federal, state, or local regulations.

Job Description At Griffith Company, we recognize that people are our most valuable resource. We nurture that resource by fostering a work environment that encourages communication, respect and recognition. In this environment, Griffith Company employees flourish, taking their careers to new levels. In addition to offering a 120+ year history of quality, safety and excellence, Griffith Company has a dynamic, exciting and supportive culture where opportunity for growth abounds. We are looking for an experienced estimator to join our Alternative Delivery team. Our Alternative Delivery team oversees Griffith Company's successful bid and execution of alternative delivery projects such as Construction Manager/General Contractor (CMGC) and Progressive Design Build. This position is responsible for the development of accurate and timely estimates for both private and public works projects. Essential Functions • Review proposal specifications, drawings, soils reports and existing site conditions to determine scope of work., • Attend pre-bid meetings., • Oversee the good faith effort process and communicate the DBE requirements to the estimating team., • Coordinate bid preparation requirements with the Contract Administrator., • Perform risk and contract management responsibilities as required, and report findings to Chief Estimator and Division Manager., • Track work history., • Coordinate pre-bid RFI’s prior to specification cutoff date., • Prepare estimates by calculating complete take off of scope of work., • Coordinate total estimating effort relevant to particular bid/project as assigned., • Maintain files of working documents as backup for estimating figures., • Monitor post bid submission dates towards contract procurement, • Ensure proper project handoff if project is taken over by another PM/Team., • Coordinate scope of work with other Griffith Division and subcontractors., • Interface with Owner and other contractors to provide engineering and cost data regarding project feasibility., • Draft subcontract agreements and coordinate subcontract and purchase order administration., • Prepare budgets, subcontracts, purchase orders and assist in preliminary project schedules., • Follow awarded contracts as assigned. May include estimating extra work items, change orders, credits, procuring material, monitoring progress, cost/budget, revenue, etc., • Mentor and manage Junior Estimators and Interns as assigned., • Take an active role in managing Owner relations/business development. Minimum of a Bachelor’s degree would be preferred, or equivalent combinations of technical training and related experience. Experience • Minimum 3 years of estimating for heavy civil projects (e.g. highway, rail, underground, paving, materials manufacturing, bridge and airport infrastructure), • Proficient in understanding staging/phasing and project scope., • Must have a strong work ethic and excellent time management skills., • Must have high attention to detail., • Excellent writing, presentation, and computer skills, • Develop a thorough knowledge of company procedures, estimating techniques, all engineering disciplines, cost control systems and accounts required., • Must master Bid2Win Estimating software., • Must master Blue Beam, Agtek, and Sketch up., • Must master the process of reading plans and specifications, • Must master the process of doing takeoffs., • Must have an understanding of time impact analysis and time related overhead, • Must master Primavera P6, SureTrak, MS Project, • Must be familiar with Contract Accounting, • Must have an understanding of critical path and track delays., • Must have a valid driver’s license., • Collaboration Skills, • Detail Oriented, • Results Driven, • Process Oriented, • Analysis/Solution Driven, • Communication Proficiency, • Ethical Conduct, • Time Management, • Negotiation, • Organization Skills The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Regularly required to sit., • Frequently required to stand and walk at jobsites. In addition to offering a comprehensive benefits package for all employees — including a superior health benefits package — Griffith Company also offers generous performance-based compensation. As part of an Employee Stock Ownership Plan (ESOP) Corporation, Griffith Company employees have the opportunity to directly and financially benefit from the Company's success. Other benefits include vacation time, sick days, paid holidays, and a 401K program. (Benefits are subject to eligibility requirements) Annual Salary Range: $80,000 - $150,000. Relocation assistance will be provided to candidates outside of the local area on a case-by-case basis. Visit us at: Griffith Company is an equal opportunity employer and an employee-owned company. Important Notice to Staffing Agencies/Recruiting Firms Griffith Company will not accept unsolicited resumes from any sources other than directly from a candidate, Griffith Company employee or any of our external recruiting partners whom we already have an executed written agreement with. Any unsolicited resumes sent to any of the following will be considered Griffith Company property: Griffith Company mailing address, fax machine or email address; Griffith Company employees; or to Griffith Company's applicant/candidate database. Griffith Company will NOT pay a fee for any candidate placement resulting from the receipt of an unsolicited resume. Griffith Company will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. Agencies must obtain advance written approval from Griffith Company’s Human Resources team to submit resumes, and then only in conjunction with a valid fully-executed contract for service and in response to a specific job opening. Griffith Company will not pay a fee to any Agency that does not have such agreement in place. Agency agreements will only be valid if in writing and signed by Griffith Company’s CEO, Executive Vice President or Human Resources Director. No other Griffith Company employee is authorized to bind Griffith Company to any agreement regarding the placement of candidates by Agencies. Powered by JazzHR zsnXfgiDG6

Job DescriptionDescription About the Position We are seeking an exceptional Diesel Truck Chassis Master Mechanic to lead our service team. This senior-level position requires extensive expertise in all aspects of heavy-duty diesel truck repair, diagnostics, and the ability to mentor junior technicians. Key Responsibilities • Diagnose and repair complex diesel engine problems including electronic fuel systems, turbochargers, and emissions controls, • Perform advanced diagnostics on transmissions, differentials, and drivetrain components, • Troubleshoot and repair sophisticated electrical systems and multiplexed networks, • Execute complex brake system repairs including ABS, air disc brakes, and electronic stability control, • Repair and rebuild suspension systems, steering components, and air ride systems, • Lead diagnostic efforts on difficult or unusual repair scenarios, • Mentor and train junior mechanics and apprentices, • Perform comprehensive DOT inspections and ensure regulatory compliance, • Review and approve work performed by other technicians, • Maintain manufacturer certifications and stay current with evolving technologies, • Provide technical support and guidance to service advisors, • Estimate repair costs and timeframes for complex jobs Skills, Knowledge and Expertise • Minimum 7-10 years experience as a heavy-duty diesel mechanic, • Multiple ASE Master Technician certifications (T-series required), • Comprehensive knowledge of all major truck brands and systems, • Expert-level proficiency with diagnostic software and scan tools, • Proven track record of complex problem-solving and troubleshooting, • Strong leadership and communication skills, • Ability to read wiring diagrams, technical service bulletins, and schematics, • Valid driver's license with clean record, • ASE Master Heavy Duty Truck Technician certification, • CDL Class A or B license, • Manufacturer-specific certifications (Cummins, Detroit, Paccar, etc.), • Experience with alternative fuel systems (CNG, electric, hybrid), • Welding and fabrication capabilities, • Previous shop foreman or lead technician experience, • Technical school degree or equivalent

Job Description QA Frontline Coordinator Irwindale, CA Hourly rate: $22.00 Shift: 1st shift Main Purpose of the Job Home of the original Bistro Bowl® complete meal salad, Southern California-based Ready Pac Foods has been giving people the freedom to eat healthier for nearly 50 years as a premier producer of convenience fresh meal solutions, salads and fresh cut produce. With processing facilities throughout the United States, Ready Pac Foods manufactures a complete range of products featuring fresh produce and protein under the company’s Bistro®, Ready Snax®, Cool Cuts® and elevĀte™ brands. Offerings include fresh-cut salads, fruits, vegetables, snacking and complete meals distributed where consumers buy groceries and in restaurant chains across North America. For more information, visit . This role is a position that requires work exposure in multiple areas in our refrigerated production environment. The candidate of this position must be self-motivated, problem solver with excellent communication skills and strong interpersonal skills. The QA Lead (Coordinator) is responsible for the training of new QA hires and current QA associates. He/she will assist QA Team Lead in auditing QA and Production Quality / Food Safety related activities; review of OLQC and related activities validating compliance with customer requirements (Standard Operating Procedures and Specifications). QA Lead will be heavily involved in daily activities to help achieve quality, safety, food safety and productivity goals through the effective use of the resources. Key Outputs (list the main areas in which the job must deliver in order to achieve its purpose) Outputs Measurements/Performance Indicators Drive profitability of our products Performance efficiency, rework, OEE, Product Specification compliance Delight consumers with a commitment to quality FO, KPI, Quality Response, Consumer Complaints, 3rd Party Audit Scores Maintain a safe work environment TCIR, LWCR Drive growth of our products Fill Rate, Labor & Yield Efficiencies 100% engaged on the Company’s RCE Culture Engagement Survey and RCE Phase Assessment results Tasks (what are the standard processes/tasks performed in the position?) Follows & enforces GMP/PPE, Safety guidelines Complete daily schedule Follows & maintains HACCP & Sanitation guidelines & processes Lead/Coach/Train/Delegate Tasks to team members Communicate (verbally & in writing) to complete KPI reports Maintain KPI data Oversee and maintain good housekeeping practices / GMPs Assign and oversee GMP audits to QA Techs. Communicate and educate line associates on good product and quality Comply with SQF Regulatory Requirements Review and sign CCP documentation, Audits CCP and CQP records for compliance with Food Safety and Quality Plans Reviews prints and files CCP1 related graphs for wash water. Audits and monitors critical control records and process control points for compliance to product quality, food safety requirements Assists in the investigation of quality problems and foreign object and recommending solution for the prevention of reoccurrences Audits plant sanitation, and monitors / verifies completion of Master Sanitation. Develops and trains fellow associates in the team and production departments coaching and training Certifies personnel by providing training on assigned tasks, policies and procedures Assists in product withdrawal tracing product information using electronic and manual systems Audits environmental monitoring compliance with established enterprise / customer requirements Coordinates QA activities as needed, provides leadership Confirms compliance with Weights by auditing MAV database Conduct Packaging Integrity and labeling audits (as needed) Knowledge (What special information does the person need to know?) • B.S in Food Science or related fields, • Reading, Writing, Speaking English, • Comprehension of basic math, • Basic computer skills (RPDMS, JDE, Microsoft Office. Key Experiences (What experiences are key to the success to this job?) • Willingness to work in a cold environment, • Able to work flexible schedule, • Ability to work in fast paced environment, • Team player-able to work on a team, • Ability to multi-task, • Ability to understand plant KPI’s (production, quality & safety), • Ability to drive results to meet KPI goals, • Ability to motivate a team, • Works well across cultures, • Developing talent, • Can make tough decisions, • Ability to execute a strategy, • Interpersonal skills, • Integrity or ethics, • Technical expertise, • Bringing in the numbers, • Bilingual a plus (Spanish) Core Competencies (individual skill, talent or insight that allows a person to perform a task masterfully) Competency D or HD (Developed or Highly Developed) Drives the Business Results Orientation-the ability to identify actions necessary to achieve task completion and to obtain results; the ability to meet schedules, deadlines, quotes, and performance goals. HD Develop – the ability to work within a team to collectively execute a process. Is skilled at listening to different points of view, offers own perspective and is focused on the greater good of the team than on personal gain HD Priority Setting – is able to manage competing demands and identify those that are most important to complete first in order to ensure efficient operations. HD Urgency- The job requires decisiveness, quick response, fast action. It will often be involved in critical situations demanding that on-the -spot decision be made with good judgment. The job will repeatedly face important deadlines that must met on time. HD Commitment to Excellence Attention to Detail-The ability to see and pay attention to details; the ability to recognize the component parts of a procedure or object, and to verify the correctness or error in an individual part or procedure. HD Flexibility-The ability to readily modify, respond to, and integrate change with minimal personal resistance. HD Following Direction- The ability to effectively hear, understand, and follow directions or instructions; the willingness to postpone making personal decisions, or taking action, until you have openly listed to what you are being to do. HD Problem Solving/Critical thinking - ability to analyze information and see future impacts HD Make the Difference Commitment to the job- Motivation from within oneself to stay focused and committed to a task. HD Emotional Control-The ability to maintain a rational and objective demeanor when faced with stressful or emotional situations; a measure of self-composure in a difficult situation and the ability to act objectively, rather than impulsively or emotionally. HD Communicate Effectively – can get messages across that have the desired effect, can clearly articulate an instruction or message, is able to understand communication from leaders and translate into day-today actions. HD Personal Accountability-The ability to be responsible for the consequences of one’s own actions and decisions; taking responsibly for these decision and not shifting focus on blame or poor performance somewhere else or on others. HD Initiative-The ability to direct one’s energies towards the completion of a goal, without an external catalyst; the ability to initiate actions based on one’s own interpretation or understanding of a situation. HD Core Values/Other Personal Qualities (Behaviors the person needs to exhibit) Respect Treats everyone with dignity and makes others feel appreciated Is candid with peers in a ways that maintains self-esteem Leverages diversity of backgrounds and experience in their work Results for Orientation Can be counted on to achieve or exceed expectations Uses metrics to understand, communicate and monitor progress Makes necessary course corrections to achieve results Bias for Action Seizes opportunities and acts decisively Maintains a sense of urgency Takes responsible risks in order to move quickly Learning Demonstrates curiosity and gains insights through asking questions Shares information and teaches others Creates an environment that is comfortable for others to speak and actively listens Fun Takes winning seriously while not taking themselves too seriously Truly enjoys others achievements as much as their own Spontaneously celebrates victories and actively finds ways to make work fun

Job DescriptionOverview Are you a meticulous problem-solver with a passion for precision engineering and a keen eye for detail? We are seeking a dedicated Quality Control Technician I to join our dynamic team in Northridge, CA. This is an exceptional opportunity to launch or advance your career in a thriving engineering environment where your contributions directly impact product excellence and customer satisfaction. You'll work within a supportive culture that values innovation, continuous improvement, and professional growth, offering a clear pathway for skill development and career advancement within our organization. Our company fosters a collaborative and engaging workplace where every team member is empowered to contribute their unique talents. We believe in investing in our people, providing comprehensive training and mentorship to help you master cutting-edge quality assurance techniques and tools. This role offers the chance to become an integral part of a forward-thinking engineering firm, contributing to the development and manufacturing of high-quality products that meet stringent industry standards. If you're looking for a role where your attention to detail and commitment to quality are celebrated, and where you can grow your expertise, this is the perfect opportunity. Join us in Northridge, CA, and become a vital link in our quality chain, ensuring that every product leaving our facility meets the highest benchmarks. This position offers not just a job, but a career trajectory within a company that is at the forefront of engineering innovation, providing ample opportunities to expand your technical skills, take on new challenges, and achieve your professional aspirations. Duties & Responsibilities • Perform detailed quality inspections of incoming materials, in-process components, and finished products using established procedures and specifications., • Utilize a variety of precision measuring instruments, including calipers, micrometers, gauges, and optical comparators, for accurate dimensional measurement., • Document inspection results thoroughly, maintaining accurate records, and generating comprehensive quality reports., • Identify and document non-conforming materials or products, initiating corrective action requests and collaborating with production teams to resolve issues., • Conduct first article inspections (FAI) and in-process checks to ensure compliance with engineering drawings and quality standards., • Assist in the calibration and maintenance of inspection equipment to ensure accuracy and reliability., • Participate in root cause analysis for quality defects and contribute to the implementation of preventive and corrective actions., • Apply Statistical Process Control (SPC) techniques to monitor and improve product quality and process stability., • Collaborate cross-functionally with engineering, production, and supply chain teams to uphold quality standards throughout the product lifecycle., • Competitive Salary Range: $58,000 - $82,000 per year, commensurate with experience and qualifications. This range exceeds the local market median and maximum for similar roles, reflecting our commitment to valuing our employees., • Overtime Pay: Opportunities for additional income through overtime, with an average annual overtime earning potential of $6,750., • Comprehensive Health Insurance: Medical, dental, and vision coverage for employees and their families, with employer contributions., • Retirement Savings Plan: 401(k) with robust company matching to help you plan for your financial future., • Generous Paid Time Off (PTO): Including vacation, sick leave, and company holidays to support work-life balance., • Shift Differentials: Additional compensation for specific shifts, where applicable., • Performance Bonuses: Rewarding individual and team contributions to company success., • Professional Development: Access to training programs, workshops, and certifications to advance your skills and career., • Employee Assistance Program (EAP): Confidential support services for personal and work-related challenges., • Life and Disability Insurance: Company-paid coverage for peace of mind. Qualifications & Requirements, • High school diploma or equivalent., • 1-2 years of experience in quality control, manufacturing, or a related engineering field., • Demonstrated proficiency in using precision measurement tools such as calipers, micrometers, and gauges., • Ability to accurately read and interpret engineering drawings, blueprints, and technical specifications., • Strong mechanical aptitude and understanding of manufacturing processes., • Familiarity with Quality Management Systems (QMS) and Good Manufacturing Practices (GMP)., • Basic computer proficiency, including experience with data entry and generating reports (e.g., Microsoft Office Suite)., • Excellent attention to detail and strong observational skills for defect identification., • Ability to work effectively in a fast-paced, dynamic engineering and manufacturing environment., • Strong verbal and written communication skills for effective collaboration and documentation. Preferred Qualifications, • Associate's degree in a technical field (e.g., Quality Assurance, Engineering Technology)., • Experience with Statistical Process Control (SPC) software., • Knowledge of ISO 9001 standards., • Prior experience in aerospace, medical device, or similar high-precision manufacturing industries., • Familiarity with CMM (Coordinate Measuring Machine) operation or programming. Skills Technical Skills, • Quality inspection methodologies, • Dimensional measurement techniques, • Calibration procedures, • Data recording and analysis, • Blueprint reading, • Proficiency with calipers and micrometers, • Statistical Process Control (SPC), • Defect identification Soft Skills, • Attention to detail, • Problem-solving, • Critical thinking, • Effective communication, • Team collaboration, • Adaptability Certifications, • Required: No specific certifications are strictly required for this entry-level role, but a strong foundational understanding of quality principles is essential., • Preferred/Beneficial:, • ASQ Certified Quality Technician (CQT), • ISO 9001 Internal Auditor, • Six Sigma Green Belt (or Yellow Belt), • ASNT Level II (relevant to specific NDT applications), • IPC-A-610 Specialist Certification (for electronics manufacturing) We are an equal opportunity employer and value diversity at our organization. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. If you require an accommodation during the application process, please contact the hiring team. We actively encourage applications from individuals of all backgrounds, experiences, abilities, and perspectives. Veterans, individuals with disabilities, and members of underrepresented groups are strongly encouraged to apply.