Trabajos medical device design en Inglewood, CaliforniaCrear alertas

Company Description ANEUVO is a platform and therapy development company focused on treating disabling diseases and conditions that are not curable through traditional pharmaceutical approaches. The ANEUVO ExaStim® Stimulation System is a non-invasive neuromodulation system that has received CE Mark approval and FDA Breakthrough Device Designation for treating spinal cord injury. ExaStim® is currently cleared for use only in Europe, and its use is limited by United States law to investigational purposes. Key Responsibilities: 1. Process Development (In-House) a. Design, develop, and validate in-house manufacturing processes, including assembly, labeling, packaging, and testing. b. Create process documentation such as work instructions, manufacturing travelers, and validation protocols (IQ/OQ/PQ). c. Identify and implement process improvements to enhance quality, efficiency, and yield. d. Support setup and qualification of new equipment, tooling, and fixtures. 2. Contract Manufacturer (CM) Support a. Collaborate with contract manufacturers to transfer processes, troubleshoot production issues, and ensure alignment with company quality and performance standards. b. Review and approve CM process documentation, validations, and change controls. c. Serve as the technical liaison between internal engineering and external manufacturing partners. 3. New Product Introduction (NPI) a. Participate in design reviews to ensure manufacturability and scalability of new designs. b. Support pilot builds, process qualifications, and ramp-up to full production. c. Coordinate process transfer from development to manufacturing. 4. Continuous Improvement & Quality a. Drive continuous improvement through Lean and Six Sigma methodologies. b. Investigate root causes of non-conformances and lead corrective/preventive action implementation. c. Ensure compliance with applicable quality system regulations (e.g., FDA 21 CFR Part 820, ISO 13485). 5. Documentation & Compliance a. Maintain accurate and complete process documentation. b. Support audits and regulatory inspections by providing technical documentation and process evidence. c. Ensure processes meet safety and environmental standards. Qualifications 1. Education: • Bachelor’s degree in Electrical, Mechanical, Manufacturing, Industrial, or Biomedical Engineering (or equivalent). 2. Experience: • 7+ years of experience in manufacturing engineering, preferably within a regulated industry (medical device, pharma, or aerospace)., • Hands-on experience with process development, validation, and supplier/CM management. 3. Skills: • Strong problem-solving and analytical skills., • Experience with statistical analysis tools (e.g., Minitab, JMP) and validation methodologies., • Proficient in CAD tools and solid understanding of GD&T and design documentation., • Excellent communication and project management skills.

Paid Media and Email Marketing Designer – Beauty & Wellness Shape the Visual Future of Waterless Beauty with Oliveda Waterless Beauty is the fastest growing sector in the entire beauty industry, and we are the fastest growing waterless beauty brand disrupting the industry. Oliveda, part of the Olive Tree People family and a pioneer in waterless, olive‑tree‑based skincare and wellness, is looking for a Paid Media and Email Marketing Designer is responsible for concepting, designing, and producing high-performing creative for digital advertising and email campaigns. This role blends visual design, marketing strategy, and performance data to create assets that drive clicks, conversions, and customer engagement. What Makes Oliveda Unique? We are not just “waterless beauty.” We are tree-to-beauty, powered by 3,000-year-old olive tree skincare science. Our formulations replace up to 70% industrial water with phytonutrient-rich antioxidants, delivering clinically proven results, long-term skin transformation, and a radically more sustainable approach to beauty. Your role? Translate our science, philosophy, and purpose into compelling, elevated visuals that inspire trust, desire, and long-term brand love, across digital, and campaign design. What You’ll Do • Design static and animated creatives for paid media campaigns (social ads, display, retargeting, search extensions, etc.)., • Design and build marketing emails, including promotional blasts, newsletters, and automated lifecycle flows., • Translate campaign briefs, brand guidelines, and messaging into clear, compelling visual concepts., • Create variations of ads and emails for A/B tests (headlines, imagery, layouts, CTAs)., • Collaborate with the marketing team to understand goals, and key messages for each campaign., • Optimize creative based on performance data and testing insights to improve CTR, conversion rate, and revenue., • Ensure all assets follow brand standards and are correctly formatted for each platform and device., • Maintain a well-organized asset library (templates, components, imagery, and design systems). What We’re Looking For • 2–4 years of experience in digital design, preferably in performance/paid media and email marketing., • Strong portfolio showcasing paid ads (social/display) and email designs., • Proficiency in design tools (e.g., Figma, Adobe Creative Cloud, or similar)., • Experience with email builders or ESPs (e.g., Klaviyo, Mailchimp, HubSpot)., • Understanding of digital marketing basics: funnels, CTAs, landing pages, and A/B testing., • Ability to interpret performance metrics and iterate on creative based on results., • Strong attention to detail, deadline-driven, and comfortable managing multiple projects at once. Nice to Have • Basic HTML/CSS for email edits and troubleshooting., • Experience with motion/short-form video for paid social., • Copywriting skills for ad and email headlines, body copy, and CTAs., • Experience in clean beauty, skincare, wellness, or supplements. Why Join Oliveda? • Be part of a global movement reshaping the future of skincare, • Play a key role in defining the visual identity of a fast-growing beauty brand, • Work closely with leadership, marketing, and product teams, • Join a purpose-driven company rooted in sustainability, innovation, and science, • Opportunity to make a lasting creative impact as the brand scales globally Job Details • Job Type: Full-Time, on-site (Culver City, CA), • Compensation: $65,000 – $95,000 per year (commensurate with experience), • Benefits: Medical, Dental, Vision, Life & Health Insurance, plus 401(k)

Location: Hayes Valley, San Francisco Saelo is a design-forward Korean skincare and medical spa redefining facial aesthetics through advanced technology and natural results. We’re seeking Saelo's first Medical Assistant to support our providers, maintain operational excellence, and deliver a refined client experience. Key Responsibilities • Front Desk & Patient Coordination: Serve as the first point of contact for clients, setting the tone for Saelo’s experience. Manage patient flow by confirming appointments, sending reminders, coordinating schedule adjustments during provider buffers, and calling clients as needed. Welcome and guide guests to the waiting area, oversee front-of-house presentation and organization, restock office and retail supplies, and sign for and manage incoming deliveries., • Inventory Management: Order, track, and restock monthly medical and skincare inventory including Botox, Sculptra, Oligio tips, exosomes, and McKesson supplies. Maintain digital inventory logs and communicate with vendors as needed., • Procedure Support: Prepare treatment rooms and trays, reconstitute Botox, apply numbing, and assist during injectable or device-based procedures as needed., • Room Turnover & Sterilization: Clean, sanitize, and reset treatment rooms following each service, ensuring compliance with medical standards., • Patient Experience: Greet and prepare clients for treatment, provide comfort throughout the procedure, and ensure a smooth handoff to the front desk or provider., • Photo & Documentation: Support Medical Providers in capturing before-and-after photos, label consistently, and upload to Google Cloud for tracking and marketing purposes., • Provider Assistance: Anticipate needs during procedures, handle consumables and disposables efficiently, and communicate any clinical or equipment issues promptly., • Inventory Forecasting: Monitor usage rates and proactively flag low stock or upcoming reorders to management., • Client Education & Upsell: Understand Saelo’s philosophy and assist in upselling the Idealist program or complementary treatments aligned with client goals., • General Support: Assist with light administrative tasks such as intake forms, client notes, and organizing medical charts. Ideal Candidate • 1 year of experience in a medical spa, dermatology, or aesthetics clinic preferred. Good opportunity for future medical providers, • Organized, proactive, and attentive to detail with a passion for aesthetics and skincare, aspiring medical provider, • Able to multitask in a fast-paced, high-touch environment while maintaining a calm, professional demeanor.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Job Summary Physical Sciences Laboratories (PSL) supports the effective andtimelydevelopment and operation of national security systems through scientific research and the application of advanced technologies. PSL has more than 150 specialized laboratories used to test, analyze, and troubleshootvirtually everyaspect of rocket and satellite system design, development, construction, deployment, and operation. Theexpertiseof the laboratories' technical staff allows PSL to stay abreast of new technological developments and program support issues associated with rapidly evolving space systems. The Microelectronics Technology Department (MTD) at The Aerospace Corporation conducts basic and applied research in aerospace parts for spaceapplications, andprovides technical support to national security space programs.The MTD is seeking aSeniorX-ray ImagingResearchScientist (Research Scientist/ Senior Scientist - Signal & Image Process Engineering & Physics)to support investigations of aerospace parts' reliability and physics of failure in advanced devices, materials, and processes for space applications. S/hewill perform materials and device characterization toidentifyroot cause of failure by various techniques including X-ray radiography and computed tomography. The staff member will apply and develop techniques for data and image analysis of X-ray computed tomography data and to enhance perceptivity of failures and anomalies in devices. S/he must alsoexhibitstrong written and verbal communication skills and desire to work in an environment requiring independence as well as project leadership and teamwork. Highlights of our lab's capabilities can be seen here: Virtual Tour The selected candidate willbe requiredto workfull timeon-site at our facility inEl Segundo, CA. WhatYou'llBe Doing • Conduct non-destructive fault isolation andconstruction analysisof aerospace parts: microelectronics, 3D-printed materials, and machined parts using X-ray CT machines, • Collect and interpret X-ray tomography data, and occasionally with customers, • Provide responsive technical support to national security space programs, • Work with contractors on the handling of delicate flight hardware, • Develop or evaluate new tools for X-ray data and image acquisition or analysis, • Conduct innovative basic and applied research to advance the scientific community's knowledge in X-ray imaging MinimumRequirements for ResearchScientist- Signal & Image Process Engineering and Physics: • PhD degree in electrical engineering, physics, chemistry, computer science, material science, or related fieldsis required, • A minimum of (6) or more years of increasingly responsible and relevant professional experience inelectrical engineering, physics, chemistry, computer science, material science is required, • Deep understanding of X-ray radiography imaging techniques, and detector physics, • Understanding of computational analysis techniques for image and tomography analysis, • Strong interpersonal skills, ability to effectively convey technical information to non-technical personnel via oral and written forms, • This position requires the ability to obtain andmaintaina DoD Secret security clearance, which is issued by the US government. U.S citizenship isrequiredto obtain a security clearance In addition to the above, theminimumrequirements for theSenior Scientist - Signal & Image Process Engineering & Physics include: • A minimum of (12) or more years of increasingly responsible and relevant professional experience conducting nondestructive evaluations is required How You Can Stand Out It would be impressive if you have one or more of these: • Candidates should have a strong background in one or more of the following areas: X-ray phase contrast imaging, spectral imaging, andlaminography, • Experience with volumetric imaging software (e.g.Volume Graphics, Dragonfly), and iterative reconstruction methods is strongly desired, • Familiarity with3D printing and CAD, • Proficient in Python, MATLAB, and/or C/C++, • Familiarity withusing machine learning methods for image analysis/anomaly identification, • A current and active Secret or TS/SCI security clearance, which is issued by the U.S. government is strongly preferred. U.S. citizenship isrequiredto obtain a security clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $129,000.00 - $249,600.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. As we continue to grow as one QuidelOrtho we are seeking a Program Lead, Digital Informatics QMS Strategy. This Program Lead is responsible for developing, maintaining, and communicating QuidelOrtho' s Quality Management System strategy for Digital Informatics, Software as a Medical Device (SaMD), Artificial Intelligence (AI/ML), and Automation platforms as they pertain to in vitro diagnostic (IVD) products and associated services across all global markets. This role serves as the strategic quality authority for digitalenabled products, ensuring that regulatory, quality, and compliance expectations are proactively embedded into product lifecycle processes, digital delivery models, and organizational ways of working. This position will be onsite in Rochester, NY. * Define and evolve the global QMS strategy for digital health technologies, including SaMD, AI/MLenabled systems, cloudbased platforms, and automated workflows. * Interpret and operationalize global regulatory and standards requirements (e.g., FDA, EU MDR/IVDR, ISO 13485, IEC 62304, ISO 62366, ISO 14971, GxP data integrity) as they apply to digital and informatics solutions. * Partner with R&D, IT, Product Management, Regulatory Affairs, PMO, and Technical Quality to ensure quality by design is embedded throughout the digital product lifecycle. * Establish governance models, procedural frameworks, and decision pathways that enable agile and scalable digital innovation while maintaining regulatory compliance. * Lead riskbased approaches for software lifecycle management, cybersecurity, data governance, AI/ML change control, and algorithm performance monitoring. * Serve as a thought leader and internal consultant on emerging regulatory expectations related to AI/ML, realworld data, automation, and digital transformation. * Perform other work-related duties as assigned. Required: * Bachelors and/or technical degree in Life Sciences, Pharmacy, Engineering, Computer Science, Biomedical Engineering or a related technical discipline. * 8-10 years of progressively responsible experience within a regulated Quality Management System environment, with significant exposure to software, digital health, or informatics solutions. * Demonstrated ability to lead QMS strategy development and influence senior stakeholders across complex, matrixed organizations. * Strong understanding of global regulatory frameworks applicable to digital health, SaMD, AI/ML, and automated systems. * Proven experience applying risk management, design controls, software lifecycle processes, and post market surveillance to digital products. * Ability to translate regulatory and quality requirements into practical, scalable processes that support innovation. * Bias toward action, with a track record of driving execution aligned to organizational strategy. * Excellent written and verbal communication skills, including the ability to represent quality positions to executive leadership. * Strong collaboration skills and the ability to operate effectively across technical, regulatory, and business functions. * Willingness and ability to travel approximately 10-15%. Preferred: * Advanced degree (MS, PhD, or PharmD) strongly preferred. * Experience with AI/ML governance, algorithm change management, or real-world performance monitoring. * Background in cloudbased systems, cybersecurity, data integrity, or regulated automation platforms. * Experience supporting global regulatory inspections involving software or digital health products. Internal: Operations, Supply Chain, R&D, Commercial, Regulatory Affairs, GSO, Quality & Compliance teams globally and regionally. External: Regulatory agencies, Notified Bodies, Contract manufacturers, Suppliers, and service providers. The work environment characteristics are representative of a manufacturing, laboratory, or warehouse environment. No strenuous physical activity. Standard activities include sitting, standing, walking, talking, hearing, and visual work. May include occasional travel for site visits, leadership meetings, or regulatory support. At QuidelOrtho, our culture is shaped by four core behaviors that guide how we collaborate, make decisions, and support each other and those we serve. The ideal candidate will exhibit these behaviors, as we believe they're essential to how we thrive as a team and achieve meaningful impact: * Thrive Together - Collaborate intentionally, grow as a team * Make It Happen - Focus on priorities, embrace continuous improvement * Commit to Service - Cultivate a service mindset * Embrace Inclusion - Be open and authentic, welcome diverse perspectives Salary range for this position takes into account a wide range of factors including: education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on that facts and circumstances of each case. Salary range for this position is $155,000 to $202,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time) and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-SP1

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Information Systems and Cyber Division (ISCD)staff couple the latest in information system technologies, such as elastic compute clouds, containerization, microservices, real-time operating systems, and visualization frameworks, with expertise in cyber security, software architecture, software engineering, data science, Artificial Intelligence, process improvement, and software development to deliver responsive, resilient, high-performance software intensive systems to our Intelligence Community, DoD, and civilian customers. The Embedded & Specialized Computing Department focuses on critical space systems R&D and rapid prototyping in the areas of Rapid Prototyping (HW & SW), Resilient/Novel/Accelerated Compute Solutions, and Hardware Security. The group supports a variety of customers including the Space Force's Space Systems Command (SSC), the National Reconnaissance Office (NRO), and other civil partners (e.g., NASA) to resolve unique challenges in implementation and research. The qualified candidate will become part of the Hardware Security and Specialty Engineering section of the Embedded & Specialized Computing Department. Work Model: This position is 100% onsite at El Segundo, Ca. What You'll Be Doing • Provide hardware security support to government and contracted personnel in the areas of security controls, configuration management, configurable logic device management, and microelectronic security assessments., • Review security architecture of space mission ground systems and provide recommendations on security improvements to the system's baseline., • Directly contribute to hardware security research, development, and applications while helping to secure National Security Space Systems., • Define threat paths and develop guidance on FPGA/ASIC/embedded systems vulnerability mitigations., • Support the development and improvement of microelectronics assurance policy, requirements and documentation., • Demonstrate the ability to diagnose, troubleshoot, and debug both hardware and firmware issues effectively., • Assist with developing and distributing project tasking to junior engineers., • Collaborate with other Aerospace departments and external organizations to develop new technical demonstrations and capabilities. What Corporate Skills You'll Bring • Strong verbal and written communication skills, including the ability to develop clear technical documentation and work collaboratively with cross-functional teams, • Possess organizational, time management and project management skills, • Demonstrate flexibility and ability to adapt to changing organizational need, • Interpersonal skills to coordinate efforts and work with other internal and external organizations What You Need to be Successful Minimum Requirements for the Engineering Specialist - Embedded Software Engineering • Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, or STEM related program., • 6 to 8 years of relevant experience in a position related to FPGA design and verification, embedded systems, hardware security or similar fields., • Knowledge of DoD information security policies, including DoD 5200 directives, • Proven ability to take initiative and successfully complete tasks, lead complex technical projects, and collaborate effectively., • Proven experience in FPGA design, including familiarity with HDLs (VHDL, Verilog, and SystemVerilog) and major vendor tools (AMD Xilinx, Microchip, and Intel Altera)., • Experience with embedded system design (e.g., Xilinx Zynq/Microblaze, ARM, Altera NIOS)., • Proficiency in coding and scripting with languages such as C, C++, Python, Perl, or Shell, • Experience using project management tools such as Jira or MS Project., • Willing to travel occasionally to work location or customer site up to 20% of the time if required., • This position requires ability to obtain and maintain a security clearance, which is issued by the US government. U.S citizenship is required to obtain a security clearance. In addition to the above, the minimum Requirements for the Senior Engineering Specialist - Embedded Software Engineering include: • 10 or more years of relevant experience in a position related to hardware security, FPGA design and verification, embedded systems, or similar fields., • Experience relating to multiple hardware security fields such as embedded systems security, hardware cryptographic accelerators, vulnerability analysis, or anti-tamper. How You Can Stand Out It would be impressive if you have one or more of these: • Advanced degree in Computer Engineering, Electrical Engineering, Computer Science, or STEM related program., • Exposure to and understanding of hardware security attacks in the following areas: Hardware Trojans, Side Channel Analysis, Fault Injection, and Reverse Engineering, • Possession of relevant industry certifications such as CompTIA Security+, CISSP, • Experience related to artificial intelligence or quantum computing applications, • Current and active TS/SCI clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $129,000.00 - $193,500.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. At the Mission Payloads Division (MPD), we are pioneers in remote sensing systems that guide our country's space enterprise. Our talented and dynamic people create and flourish in electronics, sensors, radar, artificial intelligence (AI), and advanced data network domains. We boldly advance technology through our research and development and then forward to demonstration and integration. With innovative laboratories and prototyping, MPD delivers groundbreaking results. We guide our Department of Defense, intelligence community, and civil clients to enhance national productivity and security and tackle the most critical missions. Bring your intelligence and creative spirit and join us at MPD! The Parts, Materials & Processes Department (PMPD) includes subject matter experts across a broad range of areas pertaining to electrical, electronic, and electromechanical (EEE) parts procurement, qualification, application, root cause failure analysis, as well as materials and processes. Our expertise combined with a sophisticated in-house electronic component laboratory deliver innovative analysis and PM&P program management capabilities to national space systems and civil customers. PMPD is seeking an Advanced Semiconductor Packaging Engineer (Engineering Specialist - Microelectronics / Semiconductor Engineering) with proficiency in packaging, assembly, and testing, related procurement standards, related control boards for program management and adjudication of nonconformities. Work Model: The selected candidate will be required to work full time on-site at our facility at either El Segundo, CA or Chantilly, VA . What You'll Be Doing * Provide ongoing technical consultation and advice to management, internal/external customers, and contractors on the evaluation, selection, and use of advanced semiconductor packaging (e.g., 2.5/3D, system in package, multi-chip module) for space and missile applications * May lead cross-organizational teams and organize interfaces within department * Collaborate with industry colleagues, and component supplier personnel to create/maintain guidance and requirements related to selection, screening, qualification, and root cause failure analysis * Act as organization's designated representative at technical meetings, presentation, and workshops * Mentor less experienced staff - as required - and serve as role model What You Need to be Successful- Engineering Specialist Minimum Requirements: * Bachelor's degree from an accredited university in materials science, electrical engineering, physics, or another appropriate discipline * At least eight years of increasingly responsible and related engineering/scientific experience (time spent obtaining advanced degree counts towards this). * Proficiency in industry PMP requirements standards development for advanced semiconductor packaging - including related, component selection, assembly materials, and processes (PMP), and selection of elements * Experience supporting parts, materials, and processes (PM&P) program management functions which include -- control boards, design reviews, and manufacturing readiness reviews * Excellent record of customer communication and interaction * Willingness to travel [domestically/internationally] approx. 25% of time * This position requires ability to obtain and maintain a TS/SSBI security clearance, which is issued by the US government. U.S citizenship is required to obtain a security clearance. How You Can Stand Out It would be impressive if you have one or more of these: * Advanced degree from an accredited university in materials science, electrical engineering, physics, or another appropriate discipline * 8+ years of experience in advanced semiconductor packaging (time spent obtaining advanced degree counts towards this). * Experience leading/managing teams to evaluate, select, and qualify electronic parts, materials, and processes (PMP) for space-related applications while balancing risks * Demonstrated ability to assess non-MIL PRF parts and develop appropriate methods for use in space and related high-reliability applications * Hold an active TS/SSBI security clearance * Proficiency in common root cause analysis tools during problem resolution * Experience collaborating with contractors, industry working groups, and/or associations such as NASA Electronics Parts Assurance Group, Defense Logistics Agency, Joint Electron Device Engineering Council, Automotive Electronics Council, during the evaluation, selection, and adaptation of active electronic parts for space-related applications] * Possess project management skills in applications such as MS Project, Jira, etc. We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300 - $175,900 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Physical Sciences Laboratories (PSL) supports the effective andtimelydevelopment and operation of national security systems through scientific research and the application of advanced technologies. PSL has more than 150 specialized laboratories used to test, analyze, and troubleshootvirtually everyaspect of rocket and satellite system design, development, construction, deployment, and operation. Theexpertiseof the laboratories' technical staff allows PSL to stay abreast of new technological developments and program support issues associated with rapidly evolving space systems. The Microelectronics Technology Department (MTD) is part of PSL with specialized laboratories for testing, accelerating, and analyzing, failures in electronics used for space system. MTD is comprised of two sections: one that performs radiation effects testing and discrete microelectronics testing, while the other section performs failure analysis on microelectronics using tools that can identify anomalies from the macroscopic down to the atomic scale. MTD is looking a Radiation Effects Scientist (Sr. MTS -Microelectronics/Semiconductor Engineering) to support the investigation of radiation effects, reliability- and radiation-hardness-by-design, and physics of failure of advanced CMOS, SiGe, SOI, III-V, II-VI, GaN, GaAs and other advanced technology for space applications. Highlights of our lab's capabilities can be seen here: Virtual Tour The selected candidate willbe requiredto work full-time, on-site at our facility in El Segundo, CA. What You'll Be Doing • Provide technical support to national security space programs, internal, and academic collaborators, • Conduct innovative basic and applied research on microelectronic device technologies and applications to space systems, including reliability and radiation hardness., • Present results of assessments/research internally, to customers, at scientific meetings, and publish research in refereed scientific journals., • Support the adoption and assessment of new technologies and applications, space systems, including reliability and radiation hardness., • Perform radiation testing on microelectronic and optoelectronic components using gamma-rays, x-rays, neutrons, energetic protons, and energetic heavy ions., • Duties, responsibilities and activities may change, or new ones may be assigned as needed. WhatCorporateSkillsYou'll Bring • Strong written and oral communication skills, • Must work well in a team environment, • Possess organizational, time management and project management skills, • Demonstrate flexibility and ability to adapt to changing organizational need, • Interpersonal skills to coordinate efforts and work with other internal and external organizations What You Need to be Successful Minimum Requirements: • Ph.D. degreefrom an accredited college/university programin Electrical Engineering, Physics, or related discipline (pursuing or conferred within last 12 months), • 0-1 year of industry work experience, • Coursework related to semiconductor reliability or radiation effects, • Knowledge of microelectronic and/or optoelectronic device physics, • Experience in testing semiconductor devices, • Knowledge of radiation environments and the effects of TID and SEE in microelectronics., • Experience with Python / Labview / Matlab or similar software for data analysis and collection., • Willing to travel domestically up to 10%of the year to customer site/radiation test facility/conferences, • This position requirestheability to obtain and maintain a securityclearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance., • Transcripts. How You Can Stand Out It would be impressive if you have one or more of these: • Strong publication record and demonstrated ability to develop and execute innovative research projects especially those related to microelectronics., • Experience designing advanced test structure using layout tools such as Cadence Virtuoso or L-Edit IC, • Experience with radiation hardness-by-design and reliability-by-design test chip development, • Experience in microelectronics reliability, RF testing and or radiation testing, • Experience with GaN, GaAS, SiGe or related RF/5G semiconductor technology, • Experience with modeling / simulation of radiation effects or radiation transport using TCAD tools, MCNP, SRIM, GEANT4, or CREME96, • Experience with VHDL/Verilog/FPGA/Microprocessor programming We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $125,000.00 - $140,000.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Job Summary Physical Sciences Laboratories (PSL) supports the effective andtimelydevelopment and operation of national security systems through scientific research and the application of advanced technologies. PSL has more than 150 specialized laboratories used to test, analyze, and troubleshootvirtually everyaspect of rocket and satellite system design, development, construction, deployment, and operation. The diverseexpertiseof the laboratories' technical staff allows PSL to stay abreast of new technological developments and program support issues associated with rapidly evolving space systems. The Microelectronics Technology Department (MTD) is part of PSL with specialized laboratoriesfortesting, accelerating, and analyzing, failures in electronics used for space system. MTD iscomprisedof two sections: one that performs radiation effects testing and discrete microelectronics testing, while the other section performs failure analysis on microelectronics using tools that canidentifyanomalies from the macroscopic down to the atomic scale. MTD is looking aRadiation EffectsResearchScientist(Research Scientist/ Senior Scientist - Microelectronics/Semiconductor Engineering)to support the investigation of radiation effects, reliability- andradiation-hardness-by-design,and physics of failure of advanced CMOS, SiGe, SOI, III-V(GaN, GaAs), II-VI,and other advanced technology for space applications. Highlights of our lab's capabilities can be seen here: Virtual Tour The selected candidate will be required to work full-time, onsite at our location in El Segundo, CA. WhatYou'llBe Doing • Provide technical support to national security space programs, internal,and academiccollaborators, • Conduct innovative basic and applied researchon microelectronic device technologies and applications to space systems, including reliability and radiation hardness, • Present results of assessments/research internally, to customers, at scientific meetings, and publish research in refereed scientific journals, • Support the adoption and assessment ofnew technologiesand applications, space systems, including reliability and radiation hardness, • Perform radiation testing on microelectronic and optoelectronic components using gamma-rays, x-rays, neutrons, energetic protons, and energetic heavy ions, • Innovation, velocity, and accountability will primarily be used to assess job performance What You Need to be Successful MinimumRequirements forResearch Scientist - Microelectronics/Semiconductor Engineering: • Master'sdegreein Electrical Engineering, Physics, or related disciplineis required, • A minimum of (6) or more years of increasingly responsible and relevant professional work experience is required, • Knowledge of microelectronic and/or optoelectronic device physics, • Experience in testing semiconductor devices, • Knowledge of radiation environments and the effects of TID and SEE in microelectronics, • Experience with Python /LabVIEW/MATLABor similar software for data analysis and collection, • Willing to travel domesticallyup to 10%ofthe year to customer site/radiation test facility/conferences(as needed), • This position requires ability to obtain andmaintaina security clearance, which is issued by the U.S. government. U.S. citizenship isrequiredto obtain a security clearance In addition to the above, theminimumrequirements forSenior Scientist - Microelectronics/Semiconductor Engineeringinclude: • A minimum of (12) or more years of increasingly responsible and relevant professional work experience is required, • Experience working directly with government space programs - NASA, DoD, etc. How You Can Stand Out It would be impressive if you have one or more of these: • PhD degreein Electrical Engineering, Physics, or related disciplineis strongly desired, • (15)years of experienceradiation effects testing and analysisis preferred, • Previous publication records anddemonstratedability to develop and execute innovative research projects especially those related to microelectronics, • Experience with radiation hardness-by-design and reliability-by-design test chip development, • Demonstrated success with modeling / simulation of radiation effects or radiation transport using TCAD tools, MCNP, SRIM, GEANT4, or CREME96, • Experience reviewing test plans, test reports, or other technical deliverables for U.S. government programs, • Strong proficiency in writing andsubmittingproposals for internal or external project funding (grants, IRADs, etc.) We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $129,000.00 - $249,600.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. QuidelOrtho is seeking a Manager, Data Analytics. The Manager, Data Analytics is a global people leader within QuidelOrtho' s Global Quality & Compliance (GQ&C) organization. This leader is responsible for developing and leading a team of Quality professionals to ensure the design, implementation, and continuous improvement of Quality systems, processes, and programs that enable QuidelOrtho' s Right to Operate and support business agility, innovation, and growth. This role provides strategic direction and operational oversight across Quality disciplines. operate under little to no direct supervision and provide independent guidance to the business. This position is considered a subject matter expert in Quality Data Analytics and Complaint Trending. They are accountable for the work of the Quality Data Analytics team and the success of team projects; and will have significant amounts of critical organizational and technical knowledge. This leader is responsible for the day-to-day management and supervision of Quality Engineers and Data Analysts and is also accountable for developing talent, strengthening scientific and compliance capabilities, and fostering a culture of engagement, collaboration, and performance. By integrating technical expertise, data-driven insights, and agile leadership behaviors, the Manager, Data Analytics ensures that Quality systems and teams deliver sustainable business and compliance outcomes. This position will be Hybrid in any global QuidelOrtho site. * Provides independent guidance to business partners on quality data handling and analytics. Establish dashboards and data visualizations to support product quality and continuous improvement. * Leads metrics and data analytics work for Complaints, Recalls, NC, CAPA, Audits/Compliance and other areas of Quality. * Ability to manage complaint trending activities and related software system validations * Ability to compile and present quality data and analysis to the business eg: Management Review. * Lead, develop, and inspire a team of Quality professionals to achieve organizational and individual performance objectives. * Establishclear priorities, assign responsibilities, and ensure effective resource allocation to meet business and compliance needs. * Provide technical, regulatory, and operational leadership to ensure Quality systemscomply withISO 13485, FDA 21 CFR 820, IVDR, and other applicable requirements. * Drive harmonization and standardization of Quality processes, procedures, and tools across sites and functions to strengthen compliance and efficiency. * Promote a culture of continuous improvement byidentifyingopportunities for simplification, process excellence, and digital enablement within the Quality Management System (QMS). * Ensure the teammaintainsa state ofinspectionreadiness and supports successful engagement with regulatory agencies, notified bodies, and internal audits. * MonitorQuality performance using metrics and data analytics toidentifyrisks, drive root cause analysis, and implement sustainable improvements. * Coach and mentor emerging Quality team members to build organizational capability and ensure robust succession planning. * Communicate Quality and Compliance strategy, progress, and risk mitigation plans to senior leadership and cross-functional stakeholders. * Ability to identify and drive process improvements; own process investigations, nonconformance records or corrective actions in response to audit findings. * Perform other work-related duties as assigned. Required: * Bachelor's degree in Life Sciences, Engineering, or a related technical discipline required. * 7+ years of progressive experience in Quality, Compliance, or related fields within the Medical Device, IVD, or Biopharmaceutical industries, including at least 3 years in people leadership. * Strong understanding of Quality System regulations and standards, including ISO 13485, FDA 21 CFR 820, and IVDR. * Proven ability to lead and develop high-performing teams and build future technical and people leaders * Demonstrated success driving Quality and Compliance initiatives that align with business strategy and regulatory expectations. • Excellent collaboration, influence, and communication skills across functional and organizational boundaries., • Strong analytical and problem-solving skills, with experience using data to drive decision-making and improvement., • Experience leading in a matrixed, global organization and managing competing priorities effectively., • Commitment to scientific integrity, compliance excellence, and continuous improvement. Preferred: * Advanced degree (MS, PhD, MBA, or equivalent) in a relevant discipline. * Experience implementing or optimizing global Quality Management Systems (QMS) and digital tools. * Lean Six Sigma, PMP, or similar certification demonstrating process improvement expertise. * Experience supporting or leading Health Authority or Notified Body inspections. Internal: Operations, Supply Chain, R&D, Commercial, Regulatory Affairs, GSO, Quality & Compliance teams globally and regionally. External: Regulatory agencies, Notified Bodies, Contract manufacturers, Suppliers, and service providers. Typical office or laboratory environment. May involve virtual collaboration across multiple global sites. No strenuous physical activity required. May include occasional travel for site visits, leadership meetings, or regulatory support. At QuidelOrtho, our culture is shaped by four core behaviors that guide how we collaborate, make decisions, and support each other and those we serve. The ideal candidate will exhibit these behaviors, as we believe they're essential to how we thrive as a team and achieve meaningful impact: * Thrive Together - Collaborate intentionally, grow as a team * Make It Happen - Focus on priorities, embrace continuous improvement * Commit to Service - Cultivate a service mindset * Embrace Inclusion - Be open and authentic, welcome diverse perspectives Salary range for this position takes into account a wide range of factors including: education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on that facts and circumstances of each case. Salary range for this position is $135,000 to $175,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time) and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-SP1

GROW WITH US: Tandem Diabetes Care creates new possibilities for people living with diabetes, their loved ones, and their healthcare providers through a positively different experience. We'd love for you to team up with us to "innovate every day," put "people first," and take the "no-shortcuts" approach that has propelled us to become a leader in the diabetes technology industry. STAY AWESOME: Tandem Diabetes Care is proud to manufacture and sell the Tandem Mobi system and t:slim X2 insulin pump with Control-IQ+ technology - an advanced predictive algorithm that automates insulin delivery. But we're so much more than that. Our company's human-centered approach to design, development, and support delivers innovative products and services for people who use insulin. Because many of our own team members live with diabetes, or have a loved one impacted by diabetes, the work is personal, and we are committed to the cause. Learn more at ___ A DAY IN THE LIFE: Provides technical leadership to the Manufacturing Engineering team under the guidance of the Product Development Engineering group. Performs all aspects of manufacturing engineering primarily for a disposable inserter system. Leads Manufacturing Engineering activities for both new development efforts, including all aspects of new product introduction, and sustaining. This position will report to R&D during product development and then will transition to the Manufacturing Engineering group to support scale-up, automation, and process transfer to a Contract Manufacturer (CM). Sr. Manufacturing Engineers at Tandem are also responsible for: • Supports the technical development of automated and manual assembly techniques/tooling and identifies electro/mechanical testing development to improve product manufacturability., • Supports operations with the creation/routing of BOMs, DHRs, Part Numbers, work instructions, drawings, inspection requirements, and metrics:, • Manages and releases change orders., • Manages design change assessments as applicable., • Supports Manufacturing Engineering Management in applicable Metrics, such as cost, schedule adherence, yield, lot tracking, etc., • Defines continual process improvement activities through review of metrics, Kaizen events, Lean Manufacturing, and/or Six Sigma designed to optimize process efficiency, reduce costs, and minimize line down time., • Leads supplier development and qualification activities., • Defines requirements for supplier manufacturing and test processes and assists in reviewing Supplier Capability., • Supports identification of second sourcing opportunities., • Provides training to manufacturing personnel on procedure, process, and equipment changes., • Working with the Quality and R&D groups, leads root cause failure investigations, and develops and implements corrective and preventive action, as required., • Tools include PFMECA, FMECA, DOE, Fault Tree analysis., • Supports R&D and Design Engineering in the transition of new products and processes to manufacturing:, • Leads the development of production test plans, requirements, and specifications., • Partners with Quality to qualify equipment and/or processes as required., • Leads Operations, Manufacturing, and Production leaders in Prototype Development Planning activities and pilot build activities., • Supports Manufacturing Engineering in the transition of products and processes to CM:, • Leads knowledge and document transfers., • Confirms new processes/equipment at CM are equivalent in performance., • Confirms new documentation at CM is accurate/equivalent in content., • Assists in process validation activities., • Confirms completion of required training plan before assuming job responsibilities., • Ensures work is performed in compliance with company policies including Privacy/HIPAA and other regulatory, legal, and safety requirements. WHEN & WHERE YOU'LL WORK: This role will be a mix of in-office work at our Barnes Canyon facility and remote work. This position is expected to be in office 4 days per week but may vary depending on business demands. This role will require car and air travel up to 30% of time, primarily day trips to in Tijuana & Santa Clarita, and some week long trips to the mid-west. WHAT YOU'LL NEED: • B.S. degree in Science or Engineering or a related field, or equivalent combination of education and applicable job experience., • 4-6 years of experience in medical device manufacturing., • Experience in an FDA/GMP/ISO environment., • Awareness of federal and other regulations, e.g., QSRs, ISO 14971 IEC 60601 series., • Knowledge of Good Documentation Practices (GDP)., • Good analytical and organizational skills with the ability to prioritize workload., • Skilled at clearly conveying in-depth knowledge to all levels within, and outside of, the organization., • Skilled at creating a cooperative team environment., • Ability to objectively evaluate situations and make recommendations for changes in light of overall project demands., • Ability to lead effective and efficient meetings with clear objectives and the necessary stakeholders., • Experienced with MS Office and Minitab EXTRA AWESOME: • Lean Manufacturing and Six Sigma., • Process design, development, test, and validation., • Manufacturing within a clean room environment., • Working with and supporting CM., • Working with and supporting a global supply chain., • Knowledge of SolidWorks software. COMPENSATION & BENEFITS: The starting base pay range for this position is $109,000 to $135,000 annually. Base pay will vary based on job-related knowledge, skills, experience and may also fluctuate depending on candidate's location and the overall job market. In addition to base pay, Tandem offers a competitive compensation package that includes bonus and a robust benefits package. YOU SHOULD KNOW: Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable state and local Fair Chance laws and regulations. A conditional offer of employment from Tandem is contingent upon successful completion of a pre-employment screening process comprised of a drug test (excluding marijuana) and background check, which includes a review of criminal history information. Tandem has good cause to conduct a review of criminal history information of candidates for this position, as this role may involve access to proprietary, sensitive and/or confidential information, including customer protected health information. This review is required to ensure that individuals in such roles uphold high standards of trust and integrity so as to protect the interests of our customers, employees, and stakeholders. SPONSORSHIP: Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. WHY YOU'LL LOVE WORKING HERE: At Tandem, we believe joy fuels excellence. That's why we've built a workplace that celebrates your achievements and supports your well-being. Our team thrives on pushing boundaries and fostering growth, all while maintaining a spirit of fun and camaraderie. This is just one of the ways we stay awesome! Explore the benefits and reasons to love Tandem at ___. BE YOU, WITH US! We embrace the value that every single one of us brings to the table. But sometimes we forget that when we don't meet 100% of a job description's criteria - maybe you're feeling that way right now? We encourage you to apply anyway. Because we want you to be you, with us. Tandem is firmly committed to being an equal opportunity employer and does not discriminate on the basis of age, disability, sex, race, religion or belief, gender identity or expression, marriage/civil partnership, pregnancy/maternity, or sexual orientation. We are an inclusive organization, and we welcome applications from a wide range of candidates. Selection for roles will be based on individual merit alone. REFERRALS: We love a good referral! If you know someone who would be a great fit for this position, please share! APPLICATION DEADLINE: The position will be posted until a final candidate is selected for the requisition or the requisition has a sufficient number of applications. Make a move that matters. Join Tandem Diabetes Care, where we're turning challenges into triumphs every day and where your talents will help shape a healthier, happier tomorrow. #LI-Hybrid #LI-KL1

Principal Biostatistician RWE -PhD Required (NA Only) Syneos Health is a leading fully-integrated life sciences services organization built to accelerate customer success. We partner with innovators at every point across the drug development and commercialization continuum, helping them navigate complexity, anticipate change and accelerate progress. Our Clinical Solutions team members act with a drug development mindset, applying their years of experience and deep expertise to truly understand customer needs and represent those in the solutions we shape. Whether you join us in a Functional Service Provider partnership or a Full-Service environment, you'll collaborate with passionate problem solvers, innovating as a team to help our customers achieve their goals. We are agile and driven to deliver - for one another, our customers, and, most importantly, for those in need. Discover what your 25,000 future colleagues already know: Why Syneos Health • We are passionate about developing our people, through career development and progression; supportive and engaged line management; technical and therapeutic area training; peer recognition and total rewards program., • We are committed to building an inclusive culture - where you can authentically be yourself. Central to this is our purpose - Driven to Deliver - which captures the passion of our colleagues to show up each day and shape solutions that have the ability to dramatically impact someone's life., • We are continuously building the company we all want to work for and our customers want to work with. Why? Because we know that when we bring together smart colleagues from across the world, we can shape the future of healthcare, driving impact for customers and defining the pace of patient progress. Job Responsibilities *Must be located in US or Canada with no sponsorship needs to be considered for this remote role. *Previous industry experience leading RWD studies is required. *PHD required. *Serves as a statistical department resource, mentors biostatisticians on job skills, oversees or develop training plans or materials for Biostatistics associates. Conducts training sessions, or otherwise trains new hires and enhance the skills of existing personnel. *Prepares Statistical Analysis Plans (SAPs), including development of well-presented mock-up displays for tables, listings, and figures. Collaborates with sponsor, if required. *Responsible for the statistical aspects of the protocol, generation of randomization schedule, and input to the clinical study report. *Reviews SAS annotated case report forms (CRFs), SAS database design, and other study documentation to ensure protocol criteria are met and all data is captured as required to support a high quality database and the planned analysis. *Creates or reviews programming specifications for analysis datasets, tables, listings, and figures. *Directs the activities of other biostatistics personnel on assigned projects to ensure timely completion of high quality work. Provides independent review of project work produced by other statisticians in the department. Experience with: • RCT, • CT, • eMR, • Claims and Billing Data, • Patient registries, • Patient-Generated Data, • Pharmacy Data, • TTE, • Mixed Methods, • Regression, • Subgroup analyses, • Sensitivity Analysis, • Missing data methods, • ML, • Predictive Modeling, • Meta-analysis, • Neural network analysis, • Comparative Effectiveness Research, • Exploratory Data Analysis including descriptive statistics, • Propensity Score Matching, • Causal Inference, • Health Economics and Outcome Research (HEOR), • Country specific Dossiers, • Risk modeling, • Signal detection, • Biomarker trends, • Interrupted Time Series Analysis, • Network Meta-Analyses using RWD Specifics of the position • Cardio medical health includes, • Obesity, • Cardiovascular disease, • Chronic kidney disease, • Diabetes, • Osteisarcopenic Obesity (deterioration of bone, muscle, excess fat leading to metabolic dysregulation, • Fast growing, • HEOR, HTA, cost effectiveness, • R will be important - matchit, mice (multiple imputation), • SQL, • Clarity and HealthVarity data (Claims and eMR record merged, • Primarily for marketing group, • Treatment patterns, • Goal is to execute as well as guide the client, • Free government data, • A lot of pre-processing, • Evaluation of data quality, • Feasibility check for different databases *Proficiency in programming. *Ability to apply extensive knowledge of statistical design, analysis, relevant regulatory guidelines, and programming techniques utilized in clinical research and to effectively communicate statistical concepts. *Experience with regulatory submissions preferred. Excellent written and verbal communication skills. *Ability to read, write, speak, and understand English. Get to know Syneos Health Over the past 5 years, we have worked with 94% of all Novel FDA Approved Drugs, 95% of EMA Authorized Products and over 200 Studies across 73,000 Sites and 675,000+ Trial patients. No matter what your role is, you'll take the initiative and challenge the status quo with us in a highly competitive and ever-changing environment. Learn more about Syneos Health. Additional Information Tasks, duties, and responsibilities as listed in this job description are not exhaustive. The Company, at its sole discretion and with no prior notice, may assign other tasks, duties, and job responsibilities. Equivalent experience, skills, and/or education will also be considered so qualifications of incumbents may differ from those listed in the Job Description. The Company, at its sole discretion, will determine what constitutes as equivalent to the qualifications described above. Further, nothing contained herein should be construed to create an employment contract. Occasionally, required skills/experiences for jobs are expressed in brief terms. Any language contained herein is intended to fully comply with all obligations imposed by the legislation of each country in which it operates, including the implementation of the EU Equality Directive, in relation to the recruitment and employment of its employees. The Company is committed to compliance with the Americans with Disabilities Act, including the provision of reasonable accommodations, when appropriate, to assist employees or applicants to perform the essential functions of the job.

Job Description We are recruiting on behalf of our client, a well-established medical device manufacturer in Hawthorne, CA specializing in high-precision orthopedic implants and surgical components. This ISO-certified facility produces life-saving medical devices with the highest quality standards. Position Overview Our client is seeking a skilled CNC Mill Operator to join their precision manufacturing team. This is an excellent opportunity to work with cutting-edge medical technology in a stable, quality-focused environment. Key Responsibilities • Operate CNC lathes and milling machines to manufacture precision parts, • Perform CNC programming and CAM programming for various machining tasks, • Utilize GD&T principles to ensure parts meet design specifications, • Conduct electrical discharge machining when required, • Read and interpret blueprints and technical drawings, • Use precision measuring instruments such as calipers, micrometers, bore gauges, and coordinate measuring machines to verify dimensions, • Maintain equipment by performing routine maintenance and troubleshooting issues, • Collaborate with team members to improve manufacturing processes through lean manufacturing principles, • Utilize hand tools and power tools for assembly and fabrication tasks, • Follow safety protocols and maintain a clean work environment Requirements • Minimum 1 year of CNC milling machine experience, • Minimum 1 year of CNC lathe experience, • Proven experience as a machinist with a strong understanding of machining processes, • Proficiency in CNC programming, CAD software, SolidWorks, and CAM programming is highly desirable, • Familiarity with precision measuring instruments and tooling techniques, • Blueprint reading skills, • Basic math skills for calculations related to machining tasks, • Mechanical knowledge with the ability to troubleshoot equipment issues effectively, • Strong attention to detail and commitment to quality work, • Excellent problem-solving skills and the ability to work independently or as part of a team, • Must be willing to work mandatory overtime, • Ability to commute to Hawthorne, CA 90250 (Required) Preferred Qualifications • Medical device, aerospace, or precision manufacturing background, • Knowledge of GD&T (Geometric Dimensioning & Tolerancing), • Familiarity with Fanuc controls, • Experience with welding is a plus, • Ability to operate forklifts safely is preferred, • Experience with tight tolerance work What's Offered • Competitive hourly compensation based on experience, • Comprehensive benefits package including:, • 401(k) with company match, • Health insurance, • Vision insurance, • Paid time off, • Overtime opportunities, • Stable, growing company in the medical device industry, • Opportunity to work on life-saving medical products Apply now, and if you meet the qualifications, a Pave Talent recruiter will contact you within 24-48 hours.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Job Summary Physical Sciences Laboratories (PSL) supports the effective and timely development and operation of national security systems through scientific research and the application of advanced technologies. PSL has more than 150 specialized laboratories used to test, analyze, and troubleshoot virtually every aspect of rocket and satellite system design, development, construction, deployment, and operation. The expertise of the laboratories' technical staff allows PSL to stay abreast of new technological developments and program support issues associated with rapidly evolving space systems. The Microelectronics Technology Department (MTD) within PSL is at the forefront of both basic and applied research in microelectronic and optoelectronic devices for space applications, while also delivering critical technical support to national security space programs. We are seeking a dynamic Section Manager (Microelectronics/Semiconductor Engineering) to spearhead our new section, dedicated to advancing the reliability, analysis, fabrication, and physics of failure of cutting-edge technologies-including advanced CMOS, SiGe, SOI, III-V semiconductors, optoelectronics, and nanoelectronics. In this strategic leadership role, you will guide and mentor a team of talented professionals, coordinate closely with the department director and other counterpart organizations, and contribute hands-on research in these critical areas. This is an exceptional opportunity to be at the helm of transformative projects in a well-established department renowned for its expertise and innovation in supporting space and national security missions. Highlights of our lab's capabilities can be seen here: Virtual Tour The selected candidate willbe requiredto workfull-timeon-site at our facility inEl Segundo, CA. WhatYou'llBe Doing • Uses cutting edge scientific knowledge to solve critical national security problems with high impact ~65%individual contributor work, includingthe following: * Interfaces with program offices to understand and perform work for customer needs * Conductsand leadslaboratory experiments, research projects,and analysis * Prepares written and oral reports of research activities, issues, and accomplishments, and presents to higher management, subordinates, collaborators,customersand the broader scientific community in the form ofproject briefings,journal publications, deliverable reports,and conference presentations * Participates in inter-organizational team assignments and educational activities ~35% management work, including the following: • Supervises 2-10technicalstaff, includingsupportingcareer development, transfers, and terminations. Conducts performance reviews and promotionalactions, anddetermineshiring needs.Ensurescorporatepractices and securitypoliciesare followed, • Workswith the department directorand business managerto develop and implement organizational R&D and program support strategies, provide input for budgetary planning, communicate and implement corporate policies to staff, and perform administration of section business.Advisesdirectorof resource needs and capabilities, • Providesstrategic and administrative guidanceand mentorshipto technical staff for the organization, execution, and work product documentation of technical activities, • Establishesinterfaces with internal programs and external collaborators, provide assignments of staff to projects,monitoringand evaluation of project progress.Identifiesopportunities forexpanded andnew business What You Need to be Successful MinimumRequirements: * Bachelor's degree in physics, chemistry, electrical engineering, or a closely related discipline from a recognized institution is required, ensuring a strong theoretical and practical foundation for success in this role * A minimum of (6) years of professional work experience in a related topic area is essential, demonstrating a robust track record of industry knowledge, problem-solving capabilities, and the ability to drive impactful results * In-depth knowledge of advanced microelectronic and optoelectronic devices, materials, and materials analysis. * Demonstrated experience in device design and fabrication, test and characterization, reliability studies, failure analysis (including destructive physical analysis), radiation effects assessment, and the use of simulation and modeling tools. * Proven ability to connect with and work effectively alongside a diverse range of customers, programs, and ETG organizations. * Strong aptitude for establishing and maintaining effective working relationships across all levels of customer organizations and internal corporate teams. * Highly motivated and goal-oriented, with exceptional interpersonal skills that drive success in inter-organizational and interdisciplinary teamwork * Willing to traveloccasionally (approx. every-other month) for program support(as needed) * This position requires the ability to obtain and maintain Secret security clearance, which is issued by the U.S. government. U.S. citizenship isrequiredto obtain a security clearance How You Can Stand Out It would be impressive if you have one or more of these: * PhD degree is strongly preferred, underscoring a deep theoretical and research-oriented foundation for advanced problem-solving * A minimum of 8 years of progressively responsible professional engineering or scientific experience, demonstrating a proven track record of technical leadership and innovation is preferred * Experience in technical projects or program leadership is highly desirable, indicating the ability to successfully manage complex initiatives and drive cross-functional collaboration * Candidates should have a robust background in one or more of the following areas: • Microelectronic radiation effects and reliability, • CMOS and semiconductor device operation, including physics of failure (e.g., TDDB, electromigration, hot carrier injection, BTI), • Microelectronic device cleanroom processing, fabrication, and device modeling, • Laser and detector diode technology, • Physical analysis techniques such as X-ray computed tomography or FIB/SEM (destructive physical analysis), • Hardware assurance methodologies, including counterfeit detection, • Applications of these technologies in relevant fields Experience supporting satellite programs, particularly on issues related to current or emerging space technologies, is strongly desired * A current and active TS/SCI is security clearance, which is issued by the U.S. government, is strongly preferred . U.S. citizenship isrequiredto obtain a security clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $147,600.00 - $221,400.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

Salary range: Full Salary Range: $69,379 - $157,481 Anticipated Hiring Pay Scale: $80,000 - $105,000 Open date: February 10, 2026 Next review date: Friday, Apr 10, 2026 at 11:59pm (Pacific Time) Apply by this date to ensure full consideration by the committee. Final date: Friday, Apr 10, 2026 at 11:59pm (Pacific Time) Applications will continue to be accepted until this date. Geffen Academy Educators approach teaching as an intellectual profession of the highest order, one in which knowledge is not only transmitted but created. Geffen Academy Educators possess a sophisticated and reflective understanding of their discipline and a record of achievement which demonstrates their ability to utilize and contribute to the robust connections we have with UCLA, a world-class research institution. Educators' innovation is guided by our school's mission to prioritize proven educational practices while also recognizing that teaching is a complex intellectual endeavor that defies rigid codification. We are committed to a humane working environment and also recognize that teaching goes beyond the life of the mind. Geffen Academy Educators seek to create trusting and caring relationships with their students and with their larger community. Job Summary Under the direction of the I-Track Department Chair at Geffen Academy and the respective Division Director, Geffen Academy I-Track Educators are responsible for the delivery of an innovative program of secondary school instruction. The Geffen Academy Entrepreneurship & Robotics Educator will be responsible for an array of duties, including participating in the creation of a course of study, offering exciting and engaging instruction to students in as many as five (5) courses each term, and participating in the life of the school in a robust and fully engaged manner. This is a bargaining unit covered position. Geffen Academy at UCLA is seeking an Educator with a background in robotics and entrepreneurship to teach core I-Track classes and develop competitive robotics teams at the middle school and upper school level. This is a great opportunity for an Educator to join our school and teach a challenging curriculum that seeks to integrate and collaborate with other disciplines. Geffen Academy's location on the UCLA campus offers unparalleled opportunities for collaborative experiences for students in a world class research institution. Job Duties • Participate in the design and development of curricula that helps develop an innovation mindset in Geffen Academy students by developing habits of mind such as systems thinking, human-centered design, iterative solutions development and persistence., • Collaborate with I-Track Department Chair to further the development of the I-Track structure within the overall Geffen Academy program., • Build excitement in robotics by creating opportunities for students to build and compete in local, state, and national competitions., • Collaborate with local cultural and educational institutions to bring students into the world beyond the doors of Geffen Academy., • Maintain an up-to-date understanding of design-thinking, entrepreneurship, robotics, and project-based learning within secondary schools in California and beyond., • Utilize software to create opportunities for students to develop their skills and understanding of time management, business communication, components of Google Suite, databases, and online research., • Collaborate with relevant UCLA faculty in devising programs that enable GeffenAcademy's students to take advantage of the school's relationship with a research university operating at the cutting edge of knowledge creation., • Evaluate and choose books, digital materials, experiential opportunities and other academic resources to further the student experience in robotics and entrepreneurship., • Communicate information about student progress to relevant student services colleagues, including but not limited to Department Chairs, Dean of Students, - Academic Advising and College Guidance staff, Registrar, and Athletics., • Participate in department representation at parent evenings and recruitment events as needed., • Assess the continued relevance and success of course offerings within the department, • Participate in committee work, whether the committee's focus is solely within the department, or reaches to other parts of Geffen Academy., • Participate in interdisciplinary instructional programs as needed., • Serve as instructors/mentors/advisers of students' independent projects., • Engage in co-curricular and extra-curricular activities., • Participate in continuing professional development and/or training activities, • Adhere to Geffen Academy and the University of California applicable policies, procedures, and established protocols. Read and adhere to the school norms, protocols and requirements as outlined in the school Handbooks., • The successful candidate must have a degree in an engineering/computer science discipline; advanced degree preferred, experience in design thinking and entrepreneurship., • Two to three years of secondary teaching experience, with the ability to design projectbased curricula for middle and upper school students that address realworld problems, along with experience working with robotics in an educational setting., • Strong background in education with a clear understanding and embrace of Geffen Academy's mission, vision, and values., • Multidisciplinary experience and the versatility to teach a combination of entrepreneurship and engineering, as well as an interest in leading an extra-curricular program in robotics., • A sincere commitment to professional development in pedagogy and respective content area., • A passionate commitment to innovation and design thinking applied to the real world, and a desire to work with all types of learners., • Experience in a "bring your own device" educational setting and/or commitment to a BYOD program., • Excellent interpersonal, written and verbal communication skills to articulate and explain instructional issues to colleagues, students, and families., • Self-directed and able to effectively prioritize and handle multiple tasks subject to frequent interruption., • Capable of developing and sustaining effective working relationships with colleagues in the department and with other UCLA and Geffen Academy staff on matters of interdisciplinary and institutional concern. Document requirements Curriculum Vitae - Your most recently updated C.V. * Cover Letter * Statement of Research (Optional) * Reference check authorization release form - Complete and upload the reference check authorization release form * UCLA Mission Statement - As the nation's premier public research university, UC's mission is the creation, dissemination, preservation and application of knowledge for the betterment of our global society. We have a particular responsibility to the people of California which we express in the excellence of the education we provide, the impact of the research we do, the comprehensive, life-saving medical services we provide, and the public service mission we are devoted to. The University of California promotes the social mobility of its students, equips them with the tools and experience that furthers their ambitions, and regards their accomplishments across the life span as evidence of the profoundly positive impact of higher education. The UCLA campus has expressed these goals in its strategic plan as follows: Deepen our engagement with Los Angeles Expand our reach as a global university Enhance our research and creative activities Elevate how we teach Become a more effective institution Prompt for candidates for recruitment: Reflecting on your personal and professional experiences, highlight your past contributions and future commitments to advancing UCLA's mission as embodied in the 2023-28 strategic plan. These accomplishments and ambitions may be discussed in the context of describing your teaching, scholarship, and service * Statement of Teaching Reference requirements As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements. The University of California is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected status under state or federal law. As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct. • "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment, discrimination, dishonesty, or unethical conduct, as defined by the employer., • UC Sexual Violence and Sexual Harassment Policy, • UC Anti-Discrimination Policy for Employees, Students and Third Parties, • APM - 035: Affirmative Action and Nondiscrimination in Employment Los Angeles, CA

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Advanced Concepts and Enterprise Engineering (ACE), supporting Blue Origin's mission of millions of people living and working in space for the benefit of Earth. The team fosters innovation and drives engineering workflows of the future, shared solutions and standards, simplicity and lower costs, and manufacturable design. In this hands-on role, you will be based entirely on-site at our Los Angeles Facility, collaborating closely with the Space Resources Program team. We are looking for an experienced, self-motivated, and hands-on software engineer. Your responsibilities will include ownership of subsystem-level scope with minimal day-to-day oversight, communication of technical rationale and risk trade-offs, and delivery of high-quality software in a safety- and mission-critical environment. We seek a candidate who brings technical know-how, leadership capabilities, and a dedication to quality, all of which are vital in making a positive impact on our mission. The pace at Blue Origin is brisk, with rapid cycles of design, analysis, and integration, aimed at delivering scalable solutions. Therefore, we need someone who is adaptable, proactive, eager to learn, and uncompromising on safety and quality. Creativity, a spirit of innovation, and the ability to manage changing requirements are key to thriving in this role. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! • Own the design, implementation, and verification of assigned real-time flight software components (e.g., command handling, telemetry, mode/state management, timing/synchronization, device control, health monitoring)., • Implement and verify fault management behaviors for your scope (limit checks, safe responses, retries/timeouts, watchdog patterns, degraded modes) aligned to system hazards and mission objectives., • Deliver configuration-controlled flight software releases including unit/integration tests, as-built notes, and release documentation., • Develop and maintain ground software for commanding, telemetry ingest/display, data archiving, and operator tooling, with an emphasis on reliability and repeatability for mission operations., • Support end-to-end connectivity and compatibility testing (lab systems, radios, ground interfaces as applicable); produce test reports and operator procedures for your scope., • Lead troubleshooting at the hardware/software interface; perform root-cause analysis on significant anomalies within your scope and drive corrective actions to closure with cross-functional partners., • Develop and maintain software requirements, acceptance criteria, and ICDs for owned components; ensure traceability to higher-level system requirements and ConOps., • Contribute to the software V&V plan and verification matrix; execute verification, document results, and support gated reviews/change control with audit-ready artifacts., • Operate in an agile rhythm: provide estimates, support sprint planning/backlog grooming, communicate progress/risks, and coordinate dependencies across systems, GNC, avionics/instruments, mission ops, and quality/mission assurance., • Participate in and help raise the bar for code reviews, coding standards, branching/release practices, and test/coverage expectations, mentor junior engineers through reviews and lab support., • B.S. degree or higher in computer science, computer/electrical engineering, aerospace engineering, or related field (or equivalent practical experience)., • 5+ years of professional experience delivering embedded and/or mission/safety-critical software, owning features from design through verification., • Proficiency in C/C++ (embedded/RTOS/Linux) and Python (tools/automation); strong experience with Git and collaborative development workflows., • Demonstrated experience with real-time concepts (concurrency, timing, determinism), robust error handling, and operational reliability., • Demonstrated ability to integrate and debug across software/firmware/hardware boundaries and to lead root-cause investigations within your scope., • Experience working in a structured environment with requirements, interfaces, verification planning, and test evidence (tooling such as DOORS/Jama is a plus)., • Strong written and verbal communication skills; able to present technical rationale and risk trade-offs for peer/senior review., • M.S. degree in a related field., • Flight/mission software experience (command/telemetry frameworks, time sync, data handling pipelines) and/or ground segment experience (mission control tooling, link testing, ground station integration, CCSDS-like protocols)., • Hands-on experience building/operating HIL and automated regression in CI/CD; familiarity with static/dynamic analysis and code quality tooling., • Experience implementing or validating fault management approaches informed by hazard analysis/FMECA/FDIR concepts., • Familiarity with secure communications practices and/or implementing cybersecurity controls for mission/ground systems. Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! As a Embedded Systems Engineer at Blue Origin, you will be instrumental in bringing our next-generation phased array and software-defined radio systems to life. You will be a foundational member of our in-house RF communications team, responsible for the embedded software and firmware that controls and orchestrates our advanced beamforming ASICs and digital communication systems. In this role, you will bridge the gap between hardware and high-level control systems, developing the embedded software stack that enables our spacecraft communication systems to operate autonomously and efficiently in the harsh space environment. This is an opportunity to work on mission-critical embedded systems from concept through flight qualification. Responsibilities: • Design and develop embedded firmware for FPGA-based and ASIC-based digital communication systems, including control interfaces, configuration management, and telemetry collection, • Implement real-time control algorithms and state machines for beamforming systems, phased array calibration, and adaptive communication protocols, • Develop device drivers and board support packages (BSPs) for custom RF and digital hardware, • Create and maintain embedded software architecture for spacecraft communication subsystems, ensuring deterministic behavior and fault tolerance, • Interface with DSP engineers to integrate signal processing algorithms into embedded runtime environments, • Implement health monitoring, diagnostics, and telemetry systems for communication hardware, • Collaborate with systems engineers to define and implement command and data handling (C&DH) interfaces, • Conduct software integration testing, hardware-in-the-loop testing, and system-level validation, • Support hardware bring-up activities and debug complex hardware-software integration issues procurement. Minimum Qualifications: • B.S. in Computer Engineering, Electrical Engineering, Computer Science, or related field with 3+ years of experience in embedded systems development, • Strong proficiency in C/C++ for embedded systems with constrained resources, • Experience developing firmware for real-time operating systems (RTOS) such as VxWorks, FreeRTOS, or equivalent, • Hands-on experience with embedded Linux and/or bare-metal firmware development, • Familiarity with hardware interfaces including SPI, I2C, UART, PCIe, Ethernet, and memory-mapped I/O, • Experience with embedded debugging tools, logic analyzers, and oscilloscopes, • Understanding of memory management, interrupt handling, and real-time constraints in embedded systems Preferred Qualifications: • M.S. in a related field, • Experience with FPGA co-processing and hardware acceleration, • Knowledge of space-grade processors (e.g., RAD750, Leon, ARM Cortex-R/M for space), • Experience with DO-178C, MISRA-C, or other safety-critical software standards, • Familiarity with digital communication protocols and RF system control, • Experience with version control (Git), continuous integration, and automated testing frameworks, • Previous work on aerospace, satellite, or mission-critical communication systems Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Advanced Concepts and Enterprise Engineering (ACE), supporting Blue Origin's mission of millions of people living and working in space for the benefit of Earth. The team fosters innovation and drives engineering workflows of the future, shared solutions and standards, simplicity and lower costs, and manufacturable design. We are a team of collaborators, doers, and problem-solvers who are relentlessly committed to a culture of safety. This position will directly impact the history of space exploration and will require your commitment and detailed attention towards safe and repeatable space flight. Join us in lowering the cost of access to space and enabling Blue Origin's vision of millions of people living and working in space to benefit Earth. As part of a hardworking team of analysts and engineers, you will help improve effectiveness and overall product quality across the product lifecycle through driving activities related to Configuration Management. In this position you will perform change analysis activities including managing change requests, supporting change impact identification, facilitating change boards, statusing change implementation tasks, and supporting transition of engineering through to manufacturing operations. These activities will support various groups within Blue Origin meet their commitment to accurate and on-time delivery of important artifacts and ensuring known-configuration is maintained. We are seeking an individual with excellent oral, written, interpersonal, and analytical skills who can thrive in a fast-paced environment. You will share in the team's impact on all aspects of the engine product lifecycle. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! Additional responsibilities include: • Work directly with product teams in providing timely configuration and data management services for all types of data, • Work with cross-functional stakeholders to facilitate development and improvement of configuration management processes with special Operations focus, • Review proposed configuration changes to understand and assess effect on overall product and system, • Ensure configuration and data management rules are enforced and meeting customer requirements, • Lead and/or support configuration change meetings to ensure risks and change impacts are well understood and documented, • Identify and implement system and process improvements as required to increase efficiency and quality, • Lead and support in the establishment of a world-class Configuration Management structure and organization Qualifications: • AA/AS or BA/BS in a related technical discipline, • 8+ years of direct product configuration management experience (Product structure, parts, drawings, documents, work orders, and manufacturing bills of materials), • 6+ years of experience working in a highly regulated environment (aerospace, nuclear, government, medical device, etc.), • Experience working with software and technologies related to configuration management of complex products, • Experience in configuration management of part libraries, • Working knowledge of configuration management principles and practices, • Familiar with product lifecycle management (PLM) and/or data management tools, • Proficient in at least one data processing and management technique - either scripting languages such as Python or advanced spreadsheet data processing, • Possess high attention to detail and strong organizational/coordination skills, • Excellent verbal and written communication skills, • Proficient in Microsoft Office applications (Word, Excel, PowerPoint). Desired: • Proficient in technical writing of processes and procedures, • Experience using Windchill, Creo, DOORS NextGen, Confluence, and Jira Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Job DescriptionDescription As an Automation & Controls Specialist at Impulse, you will be responsible for the execution and integration of industrial automation and controls systems. This role is hands-on and technical, with ownership of electrical installation, controls programming, system bring-up, and close collaboration with engineering on machine and test system development. Responsibilities • Own electrical and controls execution for assigned machines, production equipment, or test systems, • Install, wire, and modify industrial controls hardware in accordance with NFPA 70, NFPA 79, and UL 508A standards, • Program and configure industrial controls hardware, including PLCs, VFDs, motor starters, and related devices, • Lead controls system bring-up, checkout, and validation activities, • Troubleshoot complex electrical, controls, and instrumentation issues, • Review electrical schematics; create and own redlines and drive updates back into released drawings, • Collaborate with engineering on control architecture, device selection, and design improvements, • Use EPlan to generate reports, manufacturing data, and documentation, • Provide technical guidance to technicians on wiring practices and troubleshooting, • Maintain the electrical shop, tools, consumables, and controls hardware inventory, • Document work performed and update assigned tasks or project tracking Minimum Qualifications • High school diploma or equivalency certificate, • 7+ years of work in a relevant field (manufacturing/test/R&D), • 7+ years working on electrical control systems, • 1+ years working on pneumatic and/or hydraulic systems, • 10+ years' proven experience with EPlan and PLC-based control systems (TwinCAT preferred), • 10+ years of work in a relevant field (manufacturing/test/R&D), • Strong experience supporting systems up to 480 VAC, • Strong electrical and controls troubleshooting skills, • Ability to read and interpret electrical schematics Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Senior-Principal Electrical Engineer Location: Los Angeles, CA This position is responsible for electrical design and development of new medical device products, while also providing engineering support for commercialized and sustaining products. This role plays a critical part in design execution, verification, design transfer, and post-market improvements, working closely with Quality, Regulatory, Manufacturing, and cross-functional teams. My client is developing breakthrough neuromodulation devices and bioelectronic medicine to treat diseases and injuries that are incurable with conventional pharmacological agents. They are building a cohesive team with complementary and multidisciplinary expertise to develop and bring our products to market. What the team is looking for: • Senior-level engineer with 7+ years of industry experience in regulated product development, • Strong background in analog circuit design; system-level thinking preferred, • Experience supporting manufacturing and design transfer, including collaboration with contract manufacturers, • Comfort working within Class II or Class III medical device development environments (or similarly regulated industries such as aerospace), • Hands-on experience with verification, debugging, and failure analysis, • Leading electrical design for complex medical devices from early concept through design transfer, • Defining electrical architectures, developing schematics, selecting components, and supporting PCB layout, • Supporting system integration, prototyping, verification, and validation activities, • Contributing to design controls, including requirements definition, risk management, and formal design reviews, • Sustaining engineering and post-market design improvements, • Root cause investigations related to field issues, complaints, and CAPAs, • Component obsolescence, supplier changes, and cost or reliability-driven design updates, • Regulatory impact assessments and documentation support in collaboration with Quality and Regulatory Affairs This is a highly hands-on role, ideal for someone who enjoys working in the lab, troubleshooting and debugging hardware, and driving technical issues to closure in a regulated environment. The ideal candidate has familiarity with IEC 60601, EMC, and medical device safety standards, or brings transferable experience from another highly regulated industry with a strong foundation in documentation, quality systems, and compliance.

Job Description About Us At Prenuvo, we are on a mission to flip the paradigm from reactive "sick-care" to proactive health care. Our award-winning whole body scan is fast (under 1 hour), safe (MRI has no ionizing radiation), and non-invasive (no contrast). Our unique integrated stack of optimized hardware, software, and increasingly AI, coupled with the patient-centric experience across our domestic and global clinics, have allowed us to lead the change against "we caught it too late again". We are looking for a Systems Engineer to support the design and development of systems supporting AI-driven diagnostic tools, ensuring they comply with medical device regulations. Help reshape the world through proactive healthcare while working with cutting-edge technology and high performing teams with deep expertise - join us to make a difference in people's lives! What You'll Do • Support the design, development, and validation of Software as a Medical Device (SaMD) solutions, ensuring compliance with relevant medical device regulations and standards (e.g., ISO 13485, IEC 62304)., • Collaborate with cross-functional teams, including ML scientists, software developers, clinical experts, regulatory affairs, and quality assurance, to ensure seamless integration of system requirements., • Coordinate and document the development of system architecture that ensures scalability, reliability, and compliance with safety and performance standards., • Define and document system requirements, functional specifications, risk management strategies, and validation procedures., • Conduct risk assessments and manage risk mitigation activities related to system safety and performance., • Ensure compliance with FDA and other international medical device regulations and guidelines for SaMD., • Oversee verification and validation testing, ensuring traceability from requirements to system performance., • Provide technical support during regulatory submissions and audits, collaborating with regulatory teams to ensure successful clearance., • Stay current with technological advancements, industry trends, and evolving regulatory requirements for medical devices., • Develop design control documentation, including system requirements, design reviews, and traceability matrices., • Bachelor's or Master's degree in Systems Engineering, Biomedical Engineering, Computer Science, or a related field., • Proven experience in system engineering for medical device development, specifically for SaMD., • Must have strong knowledge of regulatory standards and frameworks for medical devices (e.g., FDA 21 CFR Part 820, ISO 13485, IEC 62304)., • Proficiency in system architecture design, risk management, and validation processes for SaMD., • Familiarity with software development lifecycle (SDLC) methodologies, Agile processes, and DevOps., • Experience with medical image processing, data security, and HIPAA/GDPR compliance is a plus., • Experience implementing automation for software development, such as automated traceability, documentation generation, or CI/CD pipelines supporting verification and validation processes., • Excellent problem-solving skills and ability to work in a fast-paced, collaborative environment., • Experience working with FDA and international regulatory bodies for medical device clearance., • Familiarity with AI/ML development in healthcare. First: we are Pioneers • An avenue to make a positive impact on people's lives and their health As part of the hiring process, successful candidates will undergo a background check in compliance to applicable federal, provincial, and state rules. Please be advised that official communication from our recruitment team will only come from our authorized domain [prenuvo.com]. If you are contacted by a recruiter, please ensure their email address ends with @prenuvo.com. We do not use third-party recruitment services or any other email domains for hiring purposes. If you receive communication that you believe to be fraudulent, please report it immediately to .

Job Description Hazen and Sawyer is seeking a candidate to provide electrical engineering and design for water and wastewater facility projects. • Qualified candidate should have basic knowledge in industrial power design, including medium and low voltage electrical power distribution, generator design, motor control, VFDs, lighting systems, equipment layout and related activities., • Candidate should have basic working knowledge of the NEC and related Codes., • Support the lead electrical engineer on multiple concurrent projects for water and wastewater facilities., • Prepare project specifications, • Perform conductor sizing, conduit sizing, protective device sizing, lighting, and other electrical calculations, • Coordinate with civil, process-mechanical, structural, architectural, HVAC, and instrumentation disciplines, • Perform site visits as needed, • Perform electrical design work in AutoCAD and/or Revit as required by the project, • Perform electrical power system studies in SKM and/or ETAP as required by the project, • Review shop drawings and respond to request for information, • Bachelor of Science in Electrical Engineering, • 3-5 years of relevant experience in heavy industrial Electrical Engineering and Design; Prior experience in water/wastewater industry is desirable, • Familiarity with industrial power distribution system, • Experience in Microsoft Office products, • Experience with SKM or ETAP power system software is desirable, • Experience with AutoCAD and/or Revit BIM software is desirable, • EIT certification is desirable We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond The Role In this role you'll build the infrastructure powering the future of automated manufacturing. As an Infrastructure/DevOps Engineer, you'll work hands-on with cutting-edge cloud technologies, Kubernetes, and edge computing to enable AI-driven factories. You'll automate everything from AWS infrastructure to IoT device deployments, create robust CI/CD pipelines, and ensure our systems scale reliably across multiple manufacturing sites. This role offers deep technical challenges, from real-time data pipelines to edge Kubernetes clusters, all while directly impacting how we revolutionize manufacturing. What You'll Do * Design and implement AWS infrastructure using Terraform for multi-region deployments * Deploy and manage Kubernetes clusters (EKS) with production workloads * Build CI/CD pipelines using GitHub Actions/GitLab for 50+ repositories * Implement GitOps workflows with ArgoCD for automated deployments * Configure site-to-site networking with VPN and AWS Direct Connect * Deploy edge Kubernetes clusters for factory floor computing * Automate IoT device provisioning and configuration management * Build monitoring dashboards and alerting with Prometheus/Grafana * Implement infrastructure security best practices and compliance controls * Write automation scripts in Python/Go for operational tasks * Participate in on-call rotation and incident response * Document infrastructure patterns and runbooks * Collaborate with software teams on application deployment strategies * Optimize cloud costs and resource utilization * Support manufacturing systems with real-time requirements What We're Looking For * Strong hands-on experience with AWS services and best practices * Proficient with Kubernetes operations and troubleshooting * Expert-level Terraform skills with module development experience * Experience building CI/CD pipelines and automation workflows * Strong scripting skills in Python, Go, or Bash * Understanding of networking concepts (TCP/IP, DNS, VPN, routing) * Experience with monitoring and observability tools * Git proficiency and understanding of GitOps principles * Strong troubleshooting and debugging skills * Experience with configuration management and automation * Understanding of security best practices and compliance * Excellent documentation and communication skills * Ability to work independently and drive projects to completion * Manufacturing or IoT experience preferred * Experience with service mesh (Istio, Linkerd) Compensation For this role, the target salary range is $160,000 - $200,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Senior IT Service Desk Engineer We're looking to hire a Senior IT Service Desk Engineer who thrives in fast-paced, high-pressure environments and brings strong technical acumen paired with a people-first attitude. This role is ideal for individuals with experience supporting, engineering or aerospace firms, DoD contractors, or high-growth startups. If you're the kind of person who stays cool when things go down and can turn a stressful IT moment into a positive interaction, we want to meet you. As the primary day-to-day support lead based out of our Allen, TX office, you'll be the face of IT for our local and remote teams. You'll troubleshoot and document incoming issues, respond to employee requests with urgency and empathy, and help drive improvements in our support processes. You'll have every opportunity to flash your talent we need top tier self-starters who love the energy and vibe of a focused, rapid-paced company that's working hard to impact their world. Responsibilities • Serve as the primary support point for all end-user IT issues (hardware, software, network, account access, etc.)., • Respond to, troubleshoot, and resolve service desk tickets in a timely and professional manner., • Document all support cases clearly, including resolution steps, and proactively contribute high quality articles to our internal knowledge base., • Support and maintain laptops, peripherals, and software in a 75% Windows / 25% Linux mixed environment., • Act as the primary onsite support contact for the Torrance HQ office., • Occasionally travel (5-10%) to other sites (e.g., Allen, TX) to provide onsite IT support or assist with deployments., • Identify and recommend process improvements to improve end-user experience and operational efficiency., • Help drive a culture of empathy and calm under pressure, improving team morale during high-stress moments., • 4+ years in a service desk or IT support role, with senior or lead-level experience., • Proven experience supporting engineering companies, DoD contractors, or fast-paced, startup-like environments., • Exceptional troubleshooting skills across hardware, OS (Windows/Linux), mobile, VPN, and enterprise software suites (e.g., Office 365)., • Work tightly with a range of other IT and engineering departments to find efficiency gaps and push for solutions that will make a real impact & save people time., • Excellent communication and interpersonal skills you make IT support feel like a positive experience., • Able to prioritize tasks effectively and work independently under pressure., • Experience working in or around SCIF environments or cleared facilities., • Eligibility for clearance., • Familiarity with device management (e.g., Microsoft Intune), asset inventory tracking, basic networking concepts, and user onboarding/offboarding workflows., • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. The ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will play a defining role in how K2 Space secures and scales its corporate operations. You'll architect the security foundations that protect our people, systems, and data while enabling the rapid development and operation of high-powered satellites. This role is about building security into the fabric of the company – across identity, endpoints, networks, and cloud platforms—so teams can move quickly and confidently. As K2 Space grows from early missions to sustained operations, your work will directly enable scale without friction. The security architecture and standards you establish will shape how the company operates and protects its most ambitious work for years to come. Responsibilities • Serve as the principal technical authority for corporate security engineering, defining the long-term security architecture that protects K2 Space's people, systems, and data, • Architect and govern security controls across corporate IT environments, including identity and access management, endpoint security, network security, SaaS platforms, and cloud services, • Establish and own enterprise security standards, reference architectures, and design patterns to ensure consistency, scalability, and defense-in-depth, • Lead the design and implementation of zero trust security principles across corporate operations, integrating identity, device posture, and network controls, • Act as the final technical escalation point for complex or high-impact security incidents, leading root-cause analysis and driving durable corrective actions, • Partner closely with IT, network, and infrastructure teams to embed security into systems design, operational processes, and automation workflows, • Influence executive leadership through clear risk assessments, threat modeling, and trade-off analysis tied to business impact and mission outcomes, • Evaluate, select, and govern security technologies and vendors; drive strategic adoption, optimization, and deprecation decisions, • Design and oversee security automation and detection capabilities, improving visibility, response time, and operational efficiency, • Ensure corporate systems meet regulatory, compliance, and contractual security requirements, translating controls into practical engineering implementations., • Mentor senior and staff-level security and IT engineers, raising the organization's security engineering maturity and technical bar, • 8+ years of experience in security operations or engineering roles preferably in a fast-paced startup or technology environment, • 3+ years of development experience with any modern programming language (including but not limited to Python, C++, Rust, Go), • Knowledge of operating systems, current equipment and technologies, networking, security best practices, and system performance monitoring tools, • Comfortable working with mission critical and sensitive systems, with a sense of urgency appropriate with responsibilities, • Bachelor's degree (or equivalent) in computer science or engineering, • Base salary range for this role is $155,000 – $185,000 and equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionBioPhase Solutions specializes in recruiting top talented professionals for Southern California's Scientific community. We are currently looking for a Regulatory Affairs Specialist to work for a leading Greater Los Angeles area medical device company.Salary: $100-105kResponsibilities: • Orchestrates the coordination and preparation of document packages and dossiers for regulatory submissions within and beyond the U.S., • Actively engages in project teams, contributing regulatory strategy, timelines, and deliverables., • Manages global regulatory submissions and ongoing responsibilities, ensuring thorough reviews of changes to ensure compliance with new standards., • Supports the formulation of a global regulatory strategy for post-market changes, encompassing aspects like design, manufacturing, and labeling., • Assists in GUDID submissions., • Represents the regulatory function in manufacturing and product development teams, providing regulatory insights for product lifecycle planning. This involves:, • Strategizing and presenting alternatives for meeting regulatory requirements, both within regulatory affairs and cross-functionally., • Resolving conflicts between regulatory requirements and development issues., • Escalating complex situations to management for guidance and training opportunities., • Overseeing documentation packages for submission to global regulatory agencies., • Tracking timelines and documenting milestone achievements for inclusion in regulatory submissions., • Assisting in interactions with regulatory agencies, including submission review and on-site audit support (e.g., FDA inspections for future 510(k)s, IVDR audits related to CE marking design dossiers and technical documentation)., • Providing guidance on regulatory requirements essential for contingency planning., • Monitoring proposed and current global regulations and guidance, assessing their impact on assigned projects, and proposing suggestions for leveraging regulatory updates to expedite the approval process., • Reviews labeling content, product and process changes, and product documentation to ensure compliance, consistency, and accuracy with regulatory requirements., • Collaborates with cross-functional teams to define the scope and assess strategies for managing the entire product lifecycle, including pre-market development and post-market changes. Applies design control principles and regulatory knowledge to guide teams through successful regulatory reviews., • Assists in developing regional regulatory strategy and adapts strategies based on regulatory changes for medical devices., • Anticipates and navigates regulatory obstacles based on information from international agencies and trends in the regulatory environment., • Determines and communicates submission and approval requirements, monitoring applications under regulatory review., • Assists in evaluating proposed preclinical, clinical, and manufacturing changes for regulatory filing strategies., • Maintains annual licenses, registrations, and listings., • Assists with document legalization for foreign country registrations., • Ensures compliance with product post-market approval requirements., • Reviews regulatory aspects of contracts and assesses external communications relative to regulations., • Assists with label development and reviews for compliance before release., • Participates in determining goals and objectives for projects., • Exercises judgment in selecting innovative, practical methods to achieve problem resolution., • Assists with required activities and electronic submissions for Medical Devices Reporting (MDR/MDVR), product recalls, field corrective actions, product holds, and health hazard evaluations. Coordinates meetings with the Cross-Functional Team to finalize the decision-making process and follows up to ensure time-sensitive pending tasks are completed accordingly., • Assists in preparing, reviewing, and maintaining Design History Files (DHFs), Device Master Records (DMRs), Technical Documentation packages (for CE Marking), and other documents and activities for new product development and regulatory submissions., • Collects, evaluates, and summarizes information for reporting to management to assist with decisions regarding the suitability and effectiveness of the quality management system., • Plans, coordinates, and prepares a variety of reports, surveys, research information, and special informational requests made by management., • Participates in the validation of equipment, instruments, facilities, utilities, software, processes, and other validation activities related to regulatory functions., • Performs special projects and other related duties as assigned by management.Experience:, • Bachelors degree in a related field, • RA Certification is preferred but not required, • 3+ years of experience in the med device with 1+ years of Regulatory Affairs experience, • Experience in preparing domestic and international product submissions, • Knowledge and understanding of global regulatory requirements for new products or product changes., • Knowledge of QSR820, IVD Regulation, ISO 13485, and Design Controls., • Familiarity with MDSAP (Medical Device Auditing Program) is preferred., • Experience in leading regulatory document submissions such as e-MDR/Recall, and direct interactions with regulatory agencies.

Job DescriptionAbout Circadia Health Circadia Health is a growth-stage healthcare AI company on a mission to prevent avoidable hospitalizations and transform senior-care operations. Our Circadia Intelligence Platform combines: 1. Clinical Study Execution- Execute clinical validation studies in nursing facilities, home health settings, and other care settings- Support participant recruitment and informed consent processes- Prepare and operate investigational and reference devices - Apply physiological sensors and ensure proper data capture- Troubleshoot device and data acquisition issues during study sessions- Maintain accurate source documentation and data recordsEnsure protocol adherence and data integrity- Work in accordance with internal quality procedures and Good Clinical Practice (GCP) principles- Following initial training, you will independently run study sessions in coordination with the research team, and learn how medical device clinical validation studies are conducted.

Job Description Drive the Future with Xos Xos (NASDAQ: XOS), is a technology company and electric truck manufacturer on a mission to decarbonize commercial transportation. We design and build state-of-the-art electric vehicles, develop advanced fleet management software, and create charging solutions that make fleet electrification seamless and cost-efficient. At Xos, we're problem-solvers, innovators, and go-getters, working together to drive a cleaner, more sustainable future. Join us and be part of the movement shaping the next generation of commercial transportation. The Role Xos is seeking a Vehicle Controls Software Engineer to help design, develop, and validate control software for our next generation electric vehicle platforms.This role involves defining software requirements, implementing and testing control algorithms, and preparing technical documentation with a strong emphasis on safety, quality, and reliability. The position collaborates closely with cross-functional engineering teams to gather subsystem requirements and translate them into robust, production-ready control strategies. The Vehicle Controls Software Engineer plays an integral role in both the design and testing phase of development and regularly travels to Xos manufacturing facilities and customer sites to support vehicle commissioning, system testing, and on-site troubleshooting. What You'll Do • Define, interpret, and refine vehicle control system requirements, ensuring alignment with performance, safety, and compliance goals., • Design, implement, and integrate embedded control algorithms for electric powertrain and vehicle systems using model-based development tools (MATLAB/Simulink/Stateflow)., • Develop and execute system-level tests on HIL benches, simulators, and actual vehicles to validate control logic, and software performance., • Support vehicle commissioning, end-of-line testing, and troubleshooting activities at Xos manufacturing facilities and customer locations, including diagnostics and root cause analysis., • Create comprehensive documentation for control software design, implementation, and testing to meet internal standards and regulatory requirements., • Review and assess the impact of software changes, participating in design and requirement reviews to ensure system-level consistency and reliability., • Support change control, version control, and requirements traceability in accordance with internal processes., • Provide technical feedback to support improvement tools, procedures, and software development standards., • Bachelor's degree in Electrical Engineering, Controls Engineering, or related field., • 2+ years of experience developing and validating vehicle-level control systems., • Proficiency in MATLAB, Simulink, and Stateflow for real-time embedded control design., • Familiarity with C/C++ programming and automotive communication protocols (CAN,LIN, J1939), • Hands-on experience with HIL systems, diagnostic tools (ETAS INCA, Vector CANalyzer), and vehicle testing., • Strong analytical and problem-solving skills with a proactive, ownership-driven mindset., • Experience in fast-paced environments, with the ability to work independently and cross-functionally., • A valid Driver's License and a clean driving record are required for this position, as driving is an essential function of the role., • Experience in electric vehicle systems and architecture., • Familiarity with ISO 26262 functional safety standards The salary range for this role is specific to the locations listed below and is the range Xos Inc. reasonably and in good faith expects to pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors including, but not limited to, job-related knowledge, skillset, relevant education, qualifications, certifications, geographic location, and other business or organizational factors. The total compensation package for this position may also include other elements dependent on the position offered. Xos is a people-focused company—we are committed to providing our employees with a comprehensive package of benefits and perks designed to support their well-being and professional growth. We continually evaluate and expand our offerings to best serve our team. • Comprehensive Medical, Dental, and Vision - Coverage for you and your family, with PPO and HMO (California) plans available. We offer plans with 100% covered employee premiums. Employees can also enroll in a variety of voluntary ancillary benefits to further support their needs., • HSA & FSA Plans - Set aside pre-tax dollars for qualified healthcare expenses., • PTO - Accrue vacation time over time, with additional days earned as your tenure grows, plus sick time and paid holidays!, • Generous Company Holidays - Enjoy a generous holiday calendar, including a winter holiday hiatus in December., • Basic Life & AD&D Insurance - 100% covered by Xos, with the option to purchase additional life insurance coverage for yourself and eligible dependents., • Betterment 401(k) - Save for retirement with our employer-sponsored plan through Betterment., • Pet Insurance - Coverage for your furry friends to keep them healthy and happy! Commitment to Equal Opportunity Xos is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, gender, pregnancy, sex, sexual orientation, gender identity, gender expression, national origin, age, genetic information, ancestry, protected veteran status, disability, or any other basis protected by local, state, or federal law. Xos provides equal access to services and employment to all qualified persons. For applicants with disabilities or limitations, such as those covered by the Americans with Disabilities Act, requiring accommodations to complete the application and/or interview process, please email us at Candidate Data Privacy This notice describes how Xos (as used in this Notice, the terms "Company," "Xos," "we," "our," or "us" in this Notice refers to Xos, Inc., together with its subsidiaries and other corporate affiliates, who may handle your candidacy and application for employment) may collect, process, and use your personal data in connection with the recruitment process when you apply for a position. Xos may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in the recruitment process ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Xos may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Xos may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform duties, including individuals on our People Operations Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Xos affiliates; and (iii) Xos's service providers, including providers of background checks, staffing services, and cloud services. Where permitted by applicable law, Xos may transfer or store internationally your Candidate Profile Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Notice to Recruitment Services Xos is not accepting applications from third-party recruitment services at this time. Unsolicited resumes or candidate profiles submitted in response to our job postings will not be subject to any referral or placement fees unless a written agreement is in place with Xos for the specific job opportunity.

Job DescriptionBenefits: • Bonus based on performance, • Company parties, • Dental insurance, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Training & development Are you an athlete at heart with a passion for teamwork and competition? Bring your sports background to a dynamic career as a Financial Advisor with The Fadil Group of Northwestern Mutual! Why Current and Former Athletes Could Thrive Here: We appreciate the strengths and mindset athletes often bring to a professional environment, habits like discipline, a competitive spirit, and a drive to grow. The career path we offer provides structure, coaching, and support while allowing for personal ownership and independence. Heres why this environment could feel like a strong fit for those with an athletic background: • Coaching-Focused Support System: Many who join our firm value being surrounded by people invested in their development. Our approach includes access to an Activity Coach, Client Building Coach, Performance & Mindset Coach, and Technology Coach, along with weekly opportunities for mentorship, skill-building, and accountability. While we dont manage people, we do offer guidance and leadership for those who are coachable and motivated to improve., • Resilience and Focus: Athletes are familiar with pushing through challenges, staying committed, and maintaining long-term focus, qualities that can be helpful when navigating new opportunities or building something of your own., • Goal-Oriented Approach: Setting and working toward goals is second nature to most athletes. That mindset often translates well in a career where goal-setting and progress tracking are part of the day-to-day rhythm., • Discipline and Priority Management: Athletes learn to balance intense schedules early on. Rather than focusing on time management, we talk about priority management, because everyone gets the same 1,440 minutes in a day. How those minutes are invested can make a meaningful difference. Our growing district office is located at: 18575 Jamboree Rd Irvine CA 92612 Meet some of our team: Alex Fadil, Chief Development Officer & Managing Director: • Time with NM: Since 2009, • Previous experience: Began his Northwestern Mutual career as an intern and has grown within the organization for 16 years, advancing into leadership through hands-on development, mentorship, and a deep understanding of the firms culture and growth model., • Passionate about: Spending time with his family, including his wife and two children, traveling, exploring fine dining, skiing, and creating meaningful experiences with those closest to him.Samantha Mayer, Director of Career Development:, • Time with NM: Since 2023, • Previous experience: Built her professional foundation in the apparel licensing industry before transitioning to Northwestern Mutual, bringing strong relationship-building skills and a creative, people-focused approach to career development., • Passionate about: Working out, traveling, discovering new coffee shops, spending time at the beach, snowboarding, and attending country concerts.Key Responsibilities: As a Financial Advisor, your primary role will be to engage with clients to understand their comprehensive financial needs, providing personalized guidance to help them achieve their financial protection and planning goals. You will design and implement tailored strategies that safeguard clients' assets, income, and overall financial well-being, ensuring their long-term security. Regularly reviewing and updating clients' financial plans and insurance policies to reflect any changes in their circumstances or goals will be crucial to ensure continuous protection. Additionally, you will cultivate a robust network of clients through referrals, active community involvement, and professional associations. Qualifications: We prefer candidates with a bachelor's degree in finance, business, or a related discipline. While prior experience in insurance, financial services, or business development is beneficial, it is not mandatory. Successful candidates will possess excellent interpersonal and communication abilities, strong analytical skills, and the capability to build lasting client relationships. We welcome individuals from business development-oriented organizations with uncapped earnings potential, including those from Medical Device, Education (teachers, administrators), Logistics, Solar, Payroll Services, Tech Business Development, Real Estate, Auto Rental and others. You will be required to obtain state insurance licenses, with training provided and sponsorship considered. Benefits: You will have continuous access to training and development programs, with sponsorship for advanced certifications to enhance your expertise. We offer a lucrative compensation structure including performance-based incentives and unlimited earning potential. You will receive extensive support from a dedicated planning team, marketing resources, and experienced mentors. Enjoy the flexibility to design a work schedule that aligns with your personal and professional goals. Most importantly, you will play a pivotal role in helping individuals and families secure their financial future, making a lasting difference in the community. Northwestern Mutual is the marketing name for The Northwestern Mutual Life Insurance Company (NM) and its subsidiaries in Milwaukee, WI. Alex Fadil is a Managing Director for NM and is not in legal partnership with NM, or its subsidiaries. Flexible work from home options available.

Job Description About Machina Labs: At Machina Labs, we’re reshaping manufacturing through advanced robotics and machine learning. Our platform uses the largest 7-axis robots on the market to form 2D sheets of metal into complex 3D parts, layer-by-layer. Traditional sheet metal production was designed for scale, not flexibility. It relies on costly dies and tooling that make lower volume projects prohibitively slow and expensive. We’re changing that. Whether you’re a defense prime building a few thousand airframes or an automaker building next-generation panels, Machina Labs gives you the ability to iterate and manufacture at the speed of software. With support from the venture arms of Toyota, NVIDIA, and Lockheed Martin, we’re accelerating the future of manufacturing, one where factories are flexible, production is on-demand, and innovation is unconstrained. Job Description: Machina Labs is seeking a Senior Industrial Automation Engineer to help design, develop, and deploy the automation systems that power our next-generation robotic manufacturing platform. In this role, you will work at the intersection of industrial automation, robotics, and software, developing control systems and automation infrastructure that enable our robotic forming cells and advanced manufacturing operations. You will collaborate closely with robotics, mechanical, and software engineers to integrate automation systems, industrial hardware, and software platforms that drive our factory of the future. This role is ideal for an engineer who enjoys working on both the controls and software side of automation, building reliable industrial systems while contributing to modern software-driven manufacturing platforms. Key Responsibilities: • Design and implement industrial automation systems on top of Beckhoff TwinCAT using Structured Text., • Develop and maintain automation software that connects industrial control systems with higher-level software platforms., • Integrate industrial robots, sensors, motion systems, and manufacturing equipment into robotic production cells., • Develop and support real-time and embedded software components used in industrial automation systems., • Help define and maintain scalable automation architecture, including industrial networking, device integration, and system monitoring., • Collaborate closely with robotics, mechanical, and software engineering teams to deploy and improve automation systems., • Support development of tooling and algorithms related to motion planning, geometry processing, and manufacturing automation.Required Background & Experience:, • 5+ years of experience in industrial automation, controls engineering, or robotics systems., • Experience with Beckhoff TwinCAT or similar., • Strong experience programming PLCs using Structured Text., • Familiarity with embedded software development, • Programming experience with C, C++, or Python., • Understanding of industrial robotics systems and automated manufacturing equipment., • Ability to work across both industrial controls and modern software development environments., • Strong problem-solving skills and comfort working in fast-paced engineering environments., • Willingness to learn new technologies and adapt quickly in a rapidly evolving technical environment.Preferred Qualifications:, • Experience working with robotic manufacturing systems or high-tech industrial robotics., • Exposure to computational geometry, toolpath generation, or geometric processing., • Experience with motion control systems and servo drives., • Experience integrating industrial sensors, machine vision, or inspection systems.

Job Description OrthoPediatrics Specialty Bracing: As a leader in specialized pediatric orthotics, we take great pride in having the industry's top clinicians, technicians, and administrative staff, led by an executive team dedicated to advancing the orthotics and prosthetics profession. We have recently joined forces with OrthoPediatrics as their Specialty Bracing division to help more KIDS! Our Vision: To be recognized as the premier provider of pediatric orthotic and prosthetic services and products in the United States. Our team believes in respectful truth and transparency when interacting with patients, referral sources, and our own team members. We hold ourselves accountable for providing only the best products and services to our patients. Our team is engaged and committed to continuous improvement of our products, our patient care, and ourselves. Responsibilities: Provides care to patients with disabling conditions of limbs and spine by fitting/preparing orthopedic braces under the direction of, and in consultation with, physicians by performing the following essential duties and responsibilities (other duties may be assigned): * Examine, interview, and measure patients to determine their appliance needs; identify factors affecting appliance fit. * Fit, test, and evaluate devices on patients; make adjustments for proper fit, function, and comfort. * Instruct patients in the use and care of orthoses/prostheses. * Design orthopedic devices, based on physicians' prescriptions and examination/measurement of patients. * Maintain patients' records. * Make and modify plaster casts of areas that will be fitted with orthoses, for use in the device construction process. * Select materials and components to be used based on device design. * Confer with physicians to formulate specifications and prescriptions for orthopedic devices. * Repair, rebuild, and modify orthopedic appliances. * Construct and fabricate appliances, or direct others constructing the appliances. Education/Experience: • Bachelor's degree (B.A.) from four-year college or university, • Two plus years related experience and/or training; equivalent combination of education and experience, • Masters of Science in Orthotics and Prosthetics (MSPO), • Medical Insurance, • Dental Insurance, • Vision Insurance, • Long & Short-Term Disability, • Life Insurance and AD&D, • Retirement Savings Plan OPSB is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law. #HP

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will own the success of Avionics testing involving the computing, data acquisition, RF, and power subsystems that are key to our satellite operation. In your first 6 months, you will be pivotal in developing production quality test hardware and software to deliver flight avionics through ATP and QTP for the first Mega satellite constellation. You will be working alongside the Electrical and RF Engineering teams to interface with Avionics hardware, validate prototype designs, define test requirements, and design test infrastructure to meet critical programmatic milestones such as delivery of flight hardware to vehicle integration. In your first year, you will lead multidisciplinary test campaigns, root cause investigations, and production improvements to ensure reliability and scalability. Responsibilities • Design and fabricate test hardware, harnessing, and test systems to support electrical and RF development testing, • Develop modular, reusable test automation software and drivers in Linux, Python, C++, Rust, etc., • Execute development and production tests to meet internal and external customer needs, • Lead satellite subsystem test campaigns from kickoff, through test report, and beyond, • Develop data acquisition, control, and instrumentation systems to test at the integrated level, • Own the project management of multiple test assets and acceptance testing of flight avionics including upgrades to support hardware lifecycle, • Design device simulators deployed across component subsystem and HITL testbeds, • Bachelor's degree in electrical, computer, or other relevant engineering discipline or any equivalent combination of education and experience, • 2+ years of experience with test hardware design and software management, • Strong programming abilities (Python, C++, Rust), • Experience with data acquisition, controls, and dedicated test equipment, • Familiarity with SMC-S-016 or MIL-STD-810 testing methods, including vibration, shock, and thermal testing, • Experience with software-defined radio hardware development, including high-speed RF data converters (digital to analog and analog to digital converters), clock trees, and data converter interfaces, • Experience with calibration of RF equipment, dataflow testing, and radiated end-to-end validation, • Experience with the practical application of serial and ethernet communications, • Understanding of the failure modes of electrical systems in space environments, • Demonstrated ability to own electrical hardware test systems within an integrated engineering team, • Base salary range for this role is $100,000 - $150,000 + equity in the company, • Salary will be based on several factors including, but not limited to knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Photonic Integrated Circuit Designer – Silicon Photonics & High-Speed Optical Systems Gardena, CA | On-site Opportunity Summary A venture-backed hardware company is developing advanced optical systems designed for high-performance applications at scale. The team is focused on bringing photonic technologies out of research environments and into production, with an emphasis on performance, reliability, and manufacturability. This role is centered on designing and delivering photonic integrated circuits that serve as the foundation of next-generation optical hardware. You will work across photonics, RF, and system-level engineering to translate circuit concepts into production-ready components. The position offers direct involvement in architecture, simulation, validation, and manufacturing integration. About Us We are an early-stage engineering team building integrated optical and electronic systems for high-volume deployment. The company combines deep technical expertise with a focus on scalable manufacturing, enabling advanced photonic technologies to move from prototype to production. Job Duties • Design and simulate photonic integrated circuit components including modulators, photodiodes, filters, waveguides, couplers, and switches, • Define performance requirements and interface specifications across optical and electrical domains, • Develop layouts and routing for PIC designs across multiple material platforms, • Model and optimize optical interfaces at the package level, including coupling strategies and alignment approaches, • Collaborate with cross-functional teams across DSP, ASIC, electro-optics, and system engineering to define system behavior, • Perform lab-based characterization of optical and electrical performance for PIC components, • Develop and automate test methodologies for validation, screening, and production metrology, • Support transition to manufacturing, including test development, qualification, and process feedback, • Utilize simulation tools to validate performance and guide design decisions, • Contribute to RF, analog, and mixed-signal design efforts where required, • Work with external partners and suppliers to refine processes and ensure reliable component performance Qualifications • Master’s degree in Electrical Engineering, Optical Engineering, Applied Physics, or a related field, • 2+ years of experience in photonic or electro-optical integrated circuit design, • Hands-on experience with optical and RF lab instrumentation such as spectrum analyzers, oscilloscopes, and network analyzers, • Strong understanding of photonic device behavior and system integration principles, • Ability to work across design, simulation, and lab validation environments, • Willingness to support demanding development timelines when needed Preferred Experience • PhD in Electrical Engineering, Optical Engineering, Applied Physics, or a related discipline, • Experience with electrical simulation tools such as SPICE or similar platforms, • Familiarity with DSP techniques and optical communication metrics such as OSNR and receiver sensitivity, • Experience designing high-speed circuits for optical communication systems, including bandwidths in the tens of GHz, • Knowledge of modulation formats such as NRZ and PAM4, • Experience with RF and mixed-signal circuit design including drivers, amplifiers, and filtering, • Experience with probe-card PCB design or high-speed test interfaces, • Experience characterizing integrated photonic and electronic systems for high-speed links Why Join Us • Equity participation and performance-based incentives, • Medical, dental, and vision coverage for employees and dependents, • Paid parental leave and flexible PTO policy, • Access to a 401(k) retirement plan, • Relocation support for candidates moving to the Los Angeles area Compensation Details Salary range: $160,000 – $200,000 #LI-AV

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Senior DCS/PLC Engineer to be responsible for leading or contributing to detailed hardware and software design of process automation control systems projects. This includes defining architecture requirements, developing detailed software design specifications, programming PLC and SCADA applications, configuring thin client server applications, configuring process-based historian databases, tuning control loops, providing control system startup and commissioning services, troubleshooting existing control systems and providing control system qualifications. This a fantastic opportunity to lead/work on projects from concept through commissioning phases. You will: • Provide application/control systems design and development for systems of varying complexity, • Develop and evaluate alternative system solutions that meet stated requirements, • Modifies program/system logic involving multiple systems and subsystems, • Develop proficiency in several programming languages and control device networks for PLCs, PCs, • Interact with customers to gain an understanding of the business environment. Defines scope, plans, and deliverables for assigned work, • Work successfully in a team environment; focused strongly on customer service and continuous improvement, • Have the ability to travel 20%, • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You have: • Bachelor's Degree in Engineering or related Engineering fields., • 5+ years of experience, or equivalent combination of education, • Consulting experience, • Proficiency in troubleshooting control systems and an understanding of process controls, • Delta V experience, • Rockwell experience with products such as: ControlLogix, CompactLogix, PlantPAx, Factory Talk Software Suite, Studio 5000, PLC5, SLC500, RSView, PanelView Plus, etc., • Other PLC platform experience (GE, Siemens, Modicon), • Other SCADA and HMI package experience (Proficy and Wonderware), • Experience implementing detailed control system electrical design packages, • Working knowledge of control system networks (Ethernet, ControlNet, DeviceNet, etc.), • Understanding of Biopharmaceutical processes, GMP and validation, • Knowledge of S88 Batch standards and experience implementing batch systems, • Instrumentation experience, • Excellent written and verbal communication skills, • A DNA comprised of collaboration and teamwork. Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. Salary: $140,000 - $160,000 E Tech Group is an Equal Opportunity Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. E Tech Group is an Affirmative Action Employer of individuals with disabilities and protected veterans.

Job Description Senior Machine Learning Engineer, Reinforcement Learning – Egofold About Snail Games USASnail Games strives to create the new high bar for gameplay experience in online gaming. We have been a global developer and publisher of digital entertainment since 2009 and are committed to pushing the boundaries of the industry. About EgofoldEgofold is an AI initiative within Snail Games focused on intelligent agents, simulation, and AI-driven workflows for interactive products. It operates with startup-style speed and broad ownership, backed by an established game company, and is currently building practical prototypes while shaping its longer-term direction. About the RoleWe are looking for a Senior Machine Learning Engineer with strong depth in machine learning and practical experience applying reinforcement learning and related methods to agent behavior and decision systems. This role is focused on the ML core of Egofold: designing experiments, training and improving models, shaping evaluation loops, and helping successful approaches become usable parts of the broader project. This is not a siloed research role. The best candidates stay engaged through evaluation, iteration, and practical integration, and bring enough adjacent breadth to be effective in a small, collaborative team. We value curiosity, ownership, sound judgment, and respectful, low-ego collaboration. Job Type: Full-TimeLocation: Hybrid – Los Angeles Area (1–2 in-office meetings per month) Responsibilities * Design, train, and iterate on machine learning models for intelligent agents and decision-making systems, with an emphasis on reinforcement learning and related approaches. * Define and refine state representations, action spaces, reward structures, and evaluation criteria to improve agent behavior. * Build and improve practical experimentation and training workflows, including data generation, experiment tracking, and reproducibility. * Analyze results, debug model behavior, and make pragmatic tradeoffs between model performance, iteration speed, and system complexity. * Work closely with engineers and other partners to help integrate successful ML work into usable product systems. * Contribute thoughtful technical input on next-step experiments, tooling, and ML direction as Egofold continues to evolve. Minimum Requirements * Strong foundation in machine learning, with hands-on experience building, training, and iterating on applied ML systems. * Professional or substantial project experience with reinforcement learning, agent-based systems, sequential decision-making, or closely related areas. * Strong Python skills and experience with modern ML frameworks such as PyTorch. * Experience designing experiments, evaluating model behavior, and improving results through systematic iteration. * T-shaped capability: deep machine learning expertise plus practical range across one or more adjacent areas such as simulation, evaluation, model integration, systems collaboration, or robotics-adjacent machine learning. * Strong problem-solving ability, sound judgment, and comfort working in ambiguous, fast-changing environments. * Respectful, low-ego collaborative style and willingness to work beyond a narrow specialty when the work requires it. Nice to Have Any of the following are valuable, but we do not expect depth in every area: * Experience with reinforcement learning methods such as PPO, SAC, DQN, actor-critic, or related approaches. * Familiarity with simulation environments, multi-agent systems, game AI, or interactive agent behaviors. * Familiarity with C++, inference runtimes, or collaborating with engineers who deploy machine learning models into production systems. * Exposure to robotics, embodied AI, or embedded / on-device machine learning constraints. Salary Range: $150,000 – $185,000 Annually Why Join the Snail Games USA Team? * True focus on work/life balance * Paid company holidays, vacation, and separate sick leave * Medical, dental, vision, and Life/LTD * 401k with company match Additional Information As part of the Company’s activities in video game development, publishing, and short-form video content creation, certain projects, discussions, or creative materials may include themes, visuals, language, or subject matter that some individuals could find mature, violent, sexual, graphic, or otherwise sensitive in nature (collectively referred to as “Mature Content”). Examples may include, but are not limited to, depictions or descriptions of combat, violence, adult themes or relationships, suggestive or satirical humor, or strong language. Employees are expected to engage with such material in a professional and creative context as part of their job duties.

Job Description Overview The Senior Quality Engineer is instrumental in establishing and upholding quality control measures throughout our product and process development lifecycle, and production activities to ensure manufacture of high quality and reliable products. This role entails close collaboration with Engineering & Production teams to create and execute impactful quality assurance strategies from the initial receiving phase to the release of the final product. This role includes oversight and management of quality inspections as well as equipment calibration, qualification and maintenance. The Senior Quality Engineer's responsibilities fall under four main areas: • Management, development and validation of internal inspection processes, metrology and equipment., • Evaluation of inspection and measurement systems, metrology techniques, and tooling using statistical measurement system analysis methods., • Collaborating with cross-functional teams and suppliers to implement solutions, lead quality improvement initiatives and problem-solving efforts. The Senior Quality Engineer will provide additional support to the Quality Management System's activities as assigned at the discretion of management. This is an on-site, full-time position. Reports to: Vice President of Quality Assurance & Regulatory Affairs. Duties and Responsibilities: The Senior Quality Engineer's responsibilities typically involve: • Work closely with the Engineering & Production teams to develop best practices and improve metrology and inspection techniques for product development, manufacturing processes, equipment and fixtures., • Evaluate inspection, measurement, and test equipment, metrology techniques, and tooling to ensure suitability for intended use and compliance with quality and regulatory requirements., • Plan, execute, and interpret Measurement System Analysis (MSA) studies, including Gage Repeatability and Reproducibility (Gage R&R), Gage Linearity, and Gage Bias studies for capability and identify sources of variation related to equipment, methods, operators, or environment., • Collaborate with the Engineering & Production teams to establish necessary controls and verification/validation procedures for production processes., • Develop and implement manufacturing process controls, including in-process inspections and sampling plans for receiving in-process, and final inspection., • Responsible for supporting Engineering & Production with problem solving, process improvements and resolution to product development and manufacturability issues., • Review Engineering drawings and changes to assure that they are properly dimensioned and conform to GD&T protocol and provide proper inspectability for the related components and assemblies., • Evaluation of changes to design and/or manufacturing process for impact to the Design History File. Leads and executes activities to close any gaps, such as additional verification testing or updates to risk documentation., • Collaborate with Engineering & Production teams to develop and maintain the risk management program for the manufacturing processes., • Lead process validation efforts to ensure consistency and reliability in manufacturing outputs., • Author process verification/validation protocols and reports., • Assessing the need for new gages and equipment., • Management of quality inspections as well as equipment calibration, qualification and maintenance., • Support internal audits and external audits as needed., • Lead efforts to address nonconformities and Supplier Corrective Actions relating to custom-made components., • Participate in, or coordinate Corrective/Preventive Actions, investigations and root cause analysis., • Additional support for the Quality Management System activities as assigned., • Strong understanding of quality management systems and regulatory requirements in medical device manufacturing- (ISO 13485:2016, FDA 21 CFR 820)., • Experience with process validation, statistical process control, and measurement system analysis., • Proficiency in quality tools and methodologies (e.g., Kaizen events, Lean Manufacturing, FMEA)., • Strong understanding of metrology principles and evaluation of measurement accuracy, precision, repeatability, and reproducibility, using MSA., • Ability to apply statistical analysis to measurement data and translate results into practical manufacturing and inspection improvements., • Excellent analytical and problem-solving skills., • Strong communication and interpersonal skills., • Ability to work effectively in a cross-functional team environment., • Self-starter who works with a sense of urgency and acts as a good team player working with other disciplines., • Adaptability and resourcefulness to roll up sleeves and multitask in order to thrive in a global company environment., • Bachelor's degree in engineering, Quality Assurance, or a related field (Master's degree preferred)., • 7+ years of experience in quality engineering, preferably in the medical device industry., • ASQ certification (CQE, CQA, or similar), preferred., • Experience with CAD software and GD&T principles. To conform to U.S. Government Department of Defense regulations, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Benefits: • 401(k) Safe Harbor Plan, • Healthcare Insurance: Medical, Dental and Vision, • Other Insurance: Life Insurance and Long-Term Disability (LTD) Insurance, • Time Off: Paid Time Off (PTO), Paid Sick Leave, Paid Holidays, and Paid Bereavement Leave, • Tuition Reimbursement Program, • Performance Bonus, • Incentive Unit Plan, • Flexible Schedule Salary $110,000-$150,000 per year Privacy Policy | Critical Innovations

Job Description Drive the Future with Xos Xos (NASDAQ: XOS), is a technology company and electric truck manufacturer on a mission to decarbonize commercial transportation. We design and build state-of-the-art electric vehicles, develop advanced fleet management software, and create charging solutions that make fleet electrification seamless and cost-efficient. At Xos, we're problem-solvers, innovators, and go-getters, working together to drive a cleaner, more sustainable future. Join us and be part of the movement shaping the next generation of commercial transportation. The Role Xos is hiring a driven, results-oriented Account Executive to help accelerate the adoption of commercial electric vehicles. In this role, you'll own the full sales cycle, prospecting new fleet customers, opening doors in untapped markets, and converting opportunities into long-term partnerships. You'll work directly with fleet operators to understand their business, identify challenges, and guide them through the transition to electric transportation. This role requires consistently exceeding targets, overcoming objections, and closing deals using a mix of creativity, persistence, and deep market knowledge. If you're excited about building relationships, winning new business, and expanding Xos' footprint in the commercial EV space, this role is for you. Responsibilities • Proactively identify, research, and pursue fleet prospects., • Break into new accounts through targeted outreach, networking, industry events, and referrals., • Develop and manage relationships with fleet operators from initial contact through contract close, vehicle build, and delivery., • Take a consultative sales approach by actively listening, understanding operational needs, and proposing tailored vehicle solutions., • Consistently meet or exceed established sales quotas, revenue goals, and key performance indicators (KPIs)., • Maintain accurate and timely sales activity tracking, pipeline management, and reporting in the CRM (HubSpot)., • Collaborate cross-functionally with engineering, operations, finance, and leadership to ensure technical alignment and seamless delivery., • Anticipate and address customer objections, finding solutions to advance deals., • Stay current on EV market trends, competitor activity, and customer challenges., • Provide market insights and feedback to help shape product offerings., • High school diploma/GED, Bachelor's degree preferred or equivalent work experience., • Proven B2B sales or account management experience, ideally in transportation, commercial vehicles, or industrial products, • Strong communication skills—verbal, written, and presentation, • Ability to manage multiple sales opportunities at various stages of the pipeline, • Experience with CRM tools (HubSpot) and Google Suite., • Demonstrated history of meeting or exceeding sales targets., • Experience selling to commercial fleets preferred but not required., • Familiarity with RFP processes and fleet procurement cycles is a plus., • Understanding of EV technology and fleet electrification is a plus., • Genuine and coachable character., • Ok with ambiguity and creating processes - problem solver., • Project management skills - follow up and engages with customers The salary range for this role is specific to the locations listed below and is the range Xos Inc. reasonably and in good faith expects to pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including not but limited to, job-related knowledge, skillset, relevant education, qualifications, certifications, geographic location, and other business or organizational factors.The total compensation package for this position may also include additional elements, such as bonus opportunity for qualifying sales. • $50,000 - $72,000 annual base salary (+) DOE ; $100,000 - 140,000 annual on-target earnings (OTE), with potential to exceed Benefits & Perks Xos is a people-focused company—we are committed to providing our employees with a comprehensive package of benefits and perks designed to support their well-being and professional growth. We continually evaluate and expand our offerings to best serve our team. • Comprehensive Medical, Dental, and Vision - Coverage for you and your family, with PPO and HMO (California) plans available. We offer plans with 100% covered employee premiums. Employees can also enroll in a variety of voluntary ancillary benefits to further support their needs., • HSA & FSA Plans - Set aside pre-tax dollars for qualified healthcare expenses., • PTO - Accrue vacation time over time, with additional days earned as your tenure grows, plus sick time and paid holidays!, • Generous Company Holidays - Enjoy a generous holiday calendar, including a winter holiday hiatus in December., • Basic Life & AD&D Insurance - 100% covered by Xos, with the option to purchase additional life insurance coverage for yourself and eligible dependents., • Betterment 401(k) - Save for retirement with our employer-sponsored plan through Betterment., • Pet Insurance - Coverage for your furry friends to keep them healthy and happy! Commitment to Equal Opportunity Xos is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, gender, pregnancy, sex, sexual orientation, gender identity, gender expression, national origin, age, genetic information, ancestry, protected veteran status, disability, or any other basis protected by local, state, or federal law. Xos provides equal access to services and employment to all qualified persons. For applicants with disabilities or limitations, such as those covered by the Americans with Disabilities Act, requiring accommodations to complete the application and/or interview process, please email us at Candidate Data Privacy This notice describes how Xos (as used in this Notice, the terms "Company," "Xos," "we," "our," or "us" in this Notice refers to Xos, Inc., together with its subsidiaries and other corporate affiliates, who may handle your candidacy and application for employment) may collect, process, and use your personal data in connection with the recruitment process when you apply for a position. Xos may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in the recruitment process ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Xos may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Xos may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform duties, including individuals on our People Operations Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Xos affiliates; and (iii) Xos's service providers, including providers of background checks, staffing services, and cloud services. Where permitted by applicable law, Xos may transfer or store internationally your Candidate Profile Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Notice to Recruitment Services Xos is not accepting applications from third-party recruitment services at this time. Unsolicited resumes or candidate profiles submitted in response to our job postings will not be subject to any referral or placement fees unless a written agreement is in place with Xos for the specific job opportunity.

Job Description Overview The Director of Preclinical & Clinical Science is the scientific and medical executive responsible for guiding Critical Innovations' scientific strategy, translational direction, clinical development, and medical oversight across all stages of the product lifecycle. This includes scientific leadership of preclinical research, development of translational and biomarker strategies, design and oversight of clinical studies, and medical contributions to the development of the Company's medical products. As a licensed physician, the Director of Preclinical & Clinical Science manages the Company's medical science, providing clinical justification for development decisions, overseeing medical safety during clinical studies, and ensuring that device usability, human factors considerations, risk management, and product performance align with clinical needs and patient safety requirements. The Director of Preclinical & Clinical Science ensures all scientific, preclinical, translational, and clinical work is aligned with applicable regulatory expectations for pharmaceuticals, medical devices, and combination products. The Director of Preclinical & Clinical Science also serves as Principal Investigator (PI) or as Co-Principal Investigator (Co-PI) for select grants/contracts, providing scientific and medical leadership for externally funded programs, overseeing technical direction, and serving as the scientific and clinical point of contact for sponsoring agencies. This position requires a comprehensive understanding of preclinical research, translational medicine, and early-phase clinical development. The role also requires familiarity with relevant quality and regulatory requirements such as FDA's Quality System Regulation (21 CFR Part 820), cGMP for drug products (21 CFR Parts 210 and 211), combination product regulations (21 CFR Part 4), GLP, GCP, and applicable ISO standards (e.g., ISO 13485). The Director of Preclinical & Clinical Science must be able to work independently while participating in cross-functional leadership and executive decision-making. This is an on-site full-time position within Leadership. Time at 80% (with benefits) may be considered to accommodate for part-time clinical work. Reports to: CEO Duties and Responsibilities: The responsibilities of the Director of Preclinical & Clinical Science typically include the following. Principal Investigator Responsibilities • Serving as PI or Co-PI for federally funded grants and contracts., • Leading the scientific, technical, and clinical direction of funded programs., • Assisting with the development of proposals, statements of work, technical reports, and milestone deliverables and their oversight., • Representing the Company in communications with sponsoring agencies and funders., • Overseeing and supporting scientific research activities performed by or for Critical Innovations, including preclinical studies, translational research, and biomarker development., • Providing management support to personnel within the Scientific & Clinical department., • Ensuring preclinical research, including benchtop work and animal studies, is aligned with clinical feasibility and regulatory expectations., • Designing, overseeing, and medically guiding early-phase clinical studies., • Assisting with the development of clinical protocols, investigator's brochures, informed consent forms, and clinical sections of regulatory submissions., • Providing medical input for device usability, human factors engineering, training materials, and clinical-use risk assessments., • Ensuring proper oversight of outsourced GCP studies in accordance with regulatory requirements., • Contributing scientific, preclinical, and clinical content to regulatory submissions., • Participating in regulatory meetings as one of the Company's medical and scientific representatives. The Director of Preclinical & Clinical Science should possess the following abilities to support medical technology development through clinical evaluation: • 5+ years of experience in biotech, pharmaceutical, and/or medical device clinical development preferred., • Experience serving as a Principal Investigator (clinical, translational, or grant-funded programs) preferred., • Excellent written and oral communication skills., • Demonstrated creativity to conceptualize scientific hypotheses, clinical strategies, and translational approaches., • Strong clinical judgment and ability to interpret medical and scientific data., • Ability to identify and mitigate product-related clinical and usability risks., • Strong leadership capabilities., • Proficiency in analyzing clinical and preclinical data, • Ability to work cross-functionally with scientific, engineering, manufacturing, and quality/regulatory teams., • Self-motivated with strong time management and organization skills to ensure completion of tasks within strict timelines., • Ability to work independently, prioritize multiple projects, address complex issues, and operate within a fast-paced hands-on environment., • M.D. or D.O. degree required; board certification in a clinically relevant specialty (e.g., Emergency Medicine) preferred. To conform to U.S. Government Department of Defense regulations, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Benefits: • 401(k) Safe Harbor Plan, • Healthcare Insurance: Medical, Dental and Vision, • Other Insurance: Life Insurance and Long-Term Disability (LTD) Insurance, • Time Off: Paid Time Off (PTO), Paid Sick Leave, Paid Holidays, and Paid Bereavement Leave, • Tuition Reimbursement Program, • Performance Bonus, • Incentive Unit Plan, • Flexible Schedule Salary: $200,000 - $260,000 per year Privacy Policy | Critical Innovations

Job Description Overview The Director of CMC is responsible for day-to-day leadership and execution of Critical Innovations' Chemistry, Manufacturing, and Controls (CMC) activities, with primary oversight over analytical development, CMC strategy, and CMC program management. This position plays a key role in ensuring that the Company's drug-led products meet internal scientific standards and applicable regulatory requirements. The Director of CMC leads the development, optimization, qualification, and transfer of analytical methods; oversees CMC documentation and regulatory-support activities; and provides cross-functional coordination to ensure alignment between other departmental partners. This position does not oversee formulation or process development but collaborates closely with those teams to ensure analytical readiness, CMC coherence, and timely development support. The ideal candidate possesses strong analytical chemistry/scientific expertise, excellent technical writing capabilities, a proven track record in CMC or analytical development for pharmaceuticals and/or combination products, and a deep familiarity with CMC regulatory expectations (e.g., 21 CFR Parts 210/211, 21 CFR Part 4, ICH Q8–Q11). The Director of CMC must be able to work independently, manage multiple projects, and operate effectively in a lean organization with extensive interaction with external contract research organizations (CROs) and cross-functional internal teams. This is an on-site, full-time position. Reports to: VP of Research Duties and Responsibilities: The responsibilities of the Director of CMC typically include: Analytical Development Oversight • Oversee development, optimization, qualification, and transfer of analytical methods for drug substance and drug product testing., • Develop and manage analytical method lifecycle activities, including aging studies, purity and potency assays, impurity profiling, and device-related analytical evaluations (e.g., extractables/ leachables, dose delivery assessments)., • Oversee outsourced analytical work, including method development, sample coordination, submission, review, and interpretation of test reports., • Support the Vice President of Research in establishing the Company's end-to-end CMC development and regulatory strategy., • Define analytical acceptance criteria and control strategies aligned with Critical Quality Attributes (CQAs), product requirements, and clinical needs., • Contribute to risk assessments related to analytical methods, stability, and drug–device compatibility., • Manage CMC timelines, milestones, deliverables, and cross-functional coordination., • Track and communicate progress on analytical development, stability studies, and CMC regulatory activities., • Coordinate CMC activities with other departments., • Draft, review, and contribute to CMC sections of regulatory submissions (e.g., IND Module 3), method descriptions, stability summaries, analytical justification narratives, and combination-product integration sections., • Contribute to development of CMC regulatory strategy., • Provide analytical and CMC subject-matter expertise during regulatory interactions., • Collaborate with engineering and quality/regulatory to ensure analytical and CMC readiness for combination-product development., • Support process and formulation development teams by providing analytical insight, specifications, and method support needed for process work., • Perform and document all work in accordance with ISO 13485:2016, FDA's Quality Management System Regulation (21 CFR Part 820), cGMP (21 CFR Parts 210 and 211), combination-product requirements (21 CFR Part 4), GLP, and internal Quality procedures., • Excellent written and oral communication skills., • Strong analytical and problem-solving abilities related to pharmaceutical analysis., • Track record of experience in direct management of key activities related to CMC development and strategy., • Experience with CMC activities for combination products preferred., • Extensive experience in analytical method development, optimization, and troubleshooting to support small- and large-molecule characterization., • Proven track record in analytical method development, optimization, and troubleshooting., • Experience leading a team of other scientists., • Demonstrated leadership for outsourced analytical work at CROs/CDMOs., • Proficiency in generating and reviewing CMC documentation for regulatory submissions., • Ability to work cross-functionally with scientific, engineering, and regulatory personnel., • Strong organization and time-management skills, with the ability to manage multiple concurrent tasks., • PhD or MS in analytical chemistry, pharmaceutical sciences, chemical engineering, or a related scientific discipline., • 7+ years of experience in CMC or analytical development for pharmaceuticals and/or combination products preferred., • Experience supporting IND or equivalent regulatory submissions preferred. To conform to U.S. Government Department of Defense regulations, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Benefits: • 401(k) Safe Harbor Plan, • Healthcare Insurance: Medical, Dental and Vision, • Other Insurance: Life Insurance and Long-Term Disability (LTD) Insurance, • Time Off: Paid Time Off (PTO), Paid Sick Leave, Paid Holidays, and Paid Bereavement Leave, • Tuition Reimbursement Program, • Performance Bonus, • Incentive Unit Plan, • Flexible Schedule Salary: $140,000 -180,000 per year Privacy Policy | Critical Innovations

Job DescriptionHardware Product Lead Location: Los Angeles, CA (Onsite) Compensation: $120,000-$145,000 About the Role The Hardware Product Lead owns SprintRay hardware products end-to-end—from concept through mass production. This is a highly technical, hands-on product role for someone with a strong engineering background (Mechanical, Electrical, or Industrial) who can translate complex technical constraints into clear product decisions. You will act as the single accountable owner for assigned hardware products, driving execution across engineering, manufacturing, firmware, regulatory, and go-to-market teams. You will lead EVT/DVT/PVT, partner closely with China manufacturing, and ensure products ship on time without compromising quality, performance, or reliability. This role sits at the intersection of engineering rigor and product judgment. You are fluent in hardware development details (DFM, tolerances, power systems, thermal considerations, manufacturability) while balancing timelines, cost, user needs, and business priorities. Key Responsibilities * Own hardware product execution from concept through mass production, including roadmap delivery, schedules, milestones, and risk management * Serve as the single product owner for assigned hardware platforms, accountable for technical, schedule, and quality outcomes * Partner with Mechanical, Electrical, and Firmware Engineering to define requirements, resolve design tradeoffs, and drive technical decisions * Lead EVT/DVT/PVT planning and execution, including test strategies, validation plans, and production readiness * Collaborate with China-based manufacturing partners on DFM, tooling, production ramp, quality control, and yield improvements * Work closely with Device Software Product Specialist to align firmware behavior, power management, connectivity, and system performance * Partner with Industrial Design and UX to deliver intuitive, clinically appropriate products while respecting engineering constraints * Interface with Regulatory and Quality to support risk assessments, testing requirements, and compliance activities * Use field data, telemetry, service feedback, and failure analysis to drive continuous reliability and design improvements * Identify and resolve cross-functional technical blockers across hardware, firmware, manufacturing, and supply chain * Communicate clear product status, risks, and mitigation plans to leadership; escalate early with options and recommendations * Manage hardware product lifecycle, including backward compatibility, hardware transitions, and end-of-life planning * Support product launches in partnership with Marketing and Sales, including positioning, packaging, pricing inputs, and adoption support Required Qualifications * Bachelor’s degree in a technical field (Mechanical, Electrical, Industrial, Manufacturing Engineering, or similar) * 3–5+ years of experience in hardware engineering, manufacturing engineering, or technical product roles * Strong technical fluency in electromechanical systems; able to review CAD, schematics, tolerances, and DFM considerations * Hands-on experience with full hardware development cycles (EVT/DVT/PVT, tooling, production ramp) * Manufacturing knowledge across processes such as injection molding, CNC machining, sheet metal, or PCB assembly * Proven ability to work cross-functionally with Engineering, Manufacturing, Regulatory, Quality, Design, and Operations * Data-driven problem solver who leverages test results, field data, and root cause analysis to guide decisions * Clear, concise communicator who can translate technical complexity into actionable product tradeoffs * Bias for action; comfortable making decisions in ambiguous, fast-moving environments Preferred Qualifications * Degree in Mechanical Engineering, Electrical Engineering, or Mechatronics * Experience in medical devices, dental products, consumer electronics, robotics, or precision hardware * Familiarity with additive manufacturing, 3D printing, optical systems, or imaging devices * Exposure to firmware, embedded systems, or connected/IoT hardware * Experience working directly with China-based manufacturers and suppliers * Verbal fluency in Chinese Travel * 20–30% travel, including China manufacturing sites, suppliers, and customer observation visits Employment Type Full-time, Onsite About SprintRay SprintRay is rewriting the rules of dentistry with technology that’s smart, fast, and designed to make life easier for dental professionals. Since 2014, we’ve been on a mission to deliver the most advanced 3D printing solutions in the industry—combining hardware, software, and materials into one seamless ecosystem. But what really makes SprintRay different is our people. We’re a bold, global team of innovators, problem-solvers, and doers who thrive on pushing boundaries and challenging the status quo. Every product we create is driven by a simple goal: help dentists spend less time on repetitive tasks and more time changing patients’ lives. Our culture is entrepreneurial, collaborative, and fueled by curiosity. We celebrate diverse perspectives and believe the best ideas can come from anywhere. Whether we’re building next-generation AI tools, designing new materials, or supporting our customers on the front lines, we’re united by the same passion—transforming digital dentistry and having fun while we do it. At SprintRay, the future of dentistry is being printed today. Want to be part of it? Equal Opportunity Employer SprintRay is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. To All Recruitment Agencies: Without a written agreement signed by an officer of SprintRay: a) SprintRay does not accept resumes from recruiting agencies, headhunters, or any other party expecting payment in the event SprintRay speaks with or hires a candidate from such submitted resume; b) SprintRay is not responsible for any fees related to unsolicited resumes or related Terms of Service, and c) Unsolicited resumes received will be considered the property of SprintRay and will be processed accordingly. Accessibility If you need a reasonable accommodation during the application or interview process, please contact us at .

Job DescriptionSaviynt's AI-powered identity platform manages and governs human and non-human access to all of an organization's applications, data, and business processes. Customers trust Saviynt to safeguard their digital assets, drive operational efficiency, and reduce compliance costs. Built for the AI age, Saviynt is today helping organizations safely accelerate their deployment and usage of AI. Saviynt is recognized as the leader in identity security, with solutions that protect and empower the world’s leading brands, Fortune 500 companies and government institutions. For more information, please visit . Vice President of Enterprise Systems (The Builder & Scaler) We are looking for a hands-on, results-oriented Vice President to take direct ownership of operational systems and processes within for Saviynt. This leader will not just advise but will be a primary builder, designer, and execution driver of the scalable systems and processes that fuel our high-growth environment. This role combines deep operational expertise with the technical rigor of an enterprise systems architect. What You’ll Be Building: Direct Impact & Ownership Your core focus will be the design, implementation, and optimization of the critical technology and operational infrastructure that drives efficiency and customer success.What You'll Be Doing: The Impact You'll Make • System Architecture & Deployment: Architect, maintain, and directly oversee the deployment and scaling of our enterprise computing systems, including cloud infrastructure, servers, storage, networking, and critical data platforms). This is a hands-on ownership role, ensuring maximum uptime and performance., • Operational Process Design: Design, implement, and own the playbooks and core operational processes for key functions like Sales and Marketing, Finance, Customer Operations, and HRT. Move beyond simple optimization to rebuild processes for consistency, automation, and scale., • Technology Roadmap Execution: Translate the corporate strategy into an actionable, near-term IT and technology build roadmap. You will be the primary driver of execution for this roadmap, ensuring projects are delivered on time and within budget., • Data & Analytics Engineering: Lead the hands-on engineering and deployment of business reporting and performance metrics using business intelligence tools ($Tableau) and operational systems ($Gainsight, $Salesforce). Ensure data integrity and actionable insights., • Vendor and Infrastructure Management: Directly manage and optimize critical vendor relationships, service-level agreements (SLAs), and contract negotiations, focusing on maximizing cost efficiency and system performance., • Team Development & Mentorship: Actively mentor and guide a high-performing team of operations and systems specialists, fostering a culture of technical excellence and continuous, hands-on improvement., • Security & Compliance: Ensure all operational and IT infrastructure adheres to best practices in data management, cybersecurity, and compliance standards.What You Bring: The Builder’s Toolkit \uD83D\uDD27 You are a technical expert and proven operator who thrives on getting into the details and delivering tangible results. • Technical Deep Dive (15+ years):15+ years of relevant, hands-on operations experience in high-growth Enterprise software/SaaS, with a proven history of personally designing, implementing, and scaling complex enterprise systems., • System Expert: Deep and current familiarity with cloud technologies (IaaS/PaaS), networking principles, data management, and the functional architecture of key SaaS platforms (Gainsight, Salesforce)., • Process Mastery: Direct experience applying Lean, Six Sigma, or other process improvement methodologies to rebuild and automate business processes for a high-volume, global operation., • Execution Leadership: A track record of personally managing and delivering complex, company-wide technology initiatives and large-scale organizational change projects (not just sponsoring them)., • Financial & Operational Acumen: Strong ability to connect system design decisions to their immediate impact on financial metrics, profitability, and operational efficiency., • Collaboration & Influence: Demonstrated ability to work closely with senior stakeholders across functional lines to drive alignment through technical credibility and demonstrable results. Benefits • Medical, Dental, Vision, Life Insurance, • 401K, • Unlimited PTO, • Sick Time, • Holiday Parties, • Daily Catered Lunches, • Employee Recognition Programs

Job DescriptionDescriptionAs a Senior Opto-Mechanical Manufacturing Engineer at Impulse, you will work with cross-discipline teams to build opto-mechanical assemblies. You will own the build and testing of optical assembly production. Your expertise will directly impact the reliability and performance of the systems we send into orbit and beyond. Leveling will be commensurate with experience. Responsibilities • · Develop, document, and optimize manufacturing processes for opto-mechanical assemblies., • Develop and optimize metrology processes for opto-mechanical assemblies in production., • Design tooling for complex alignment of lens assemblies and drive assembly, integration and test of camera sub-assemblies., • Collaborate with optical design engineers to ensure manufacturability, DFM/DFA of optical assemblies, including custom spherical and aspherical lenses/mirrors., • Collaborate with cross functional teams on quality and long-term reliability., • Manage the optics manufacturing cleanroom, including sourcing equipment and setting processes and policies., • Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields., • Provide guidance to opto-mechanical technicians., • Support environmental and functional testing (optical, vibe, thermal, etc.) in production. Minimum Qualifications • Bachelors' degree in Mechanical Engineering, Electrical Engineering, Physics or related field, • 5+ years of demonstrated manufacturing experience in high-precision opto-mechanical manufacturing, • 5+ years of optical metrology equipment experience, such as centration measurements, interferometry and wavefront sensors., • Knowledge of optical alignment using a laser or collimated light source, • Experience with designing tooling for optical assembly, • Skilled at mechanical design and GD&T using NX and Teamcenter, • Knowledge of CNC Machining Preferred Skills and Experience • MS/PhD degree in Mechanical Engineering, Electrical Engineering, Physics or related field, • 6+ years of demonstrated manufacturing experience opto-mechanical manufacturing for space applications., • Knowledge of thermal cycling, vibe and TVAC for space applications, • Experience with managing a cleanroom facility for optical device manufacturing, • Experience with STOP analysis, • Knowledge of Optical Design Programs: Zemax/Code V/FRED/LightTools/ Oslo/TracePro, • Experience with adhesives for space applications, • Knowledge of ultra-precision machining: CCP, SPDT, MRF, IBF, Fluid-Jet Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Claros is a power management solutions company that is innovating at the intersection of power and compute to make AI more sustainable and widely available. By driving down the cost and complexity of power delivery and leveraging innovative hardware and software, the company seeks to decrease energy consumption, optimize power delivery, increase compute performance, and maximize the efficiency of AI operations. Power Management Integrated Circuit (PMIC) Controls Engineer About Claros Claros innovates at the intersection of power and compute. We build advanced semiconductor power management solutions that improve AI compute capacity, efficiency and reliability. Claros is an early-stage startup company located in Torrance, CA. If you are looking for challenging work and a strong technical environment with the collaborative & supportive culture, then Claros Tech is the company for you. We offer industry the best competitive pay & benefits and early-stage stock options. Location: Minimum of 3 days a week in the office in Torrance, CA. About the Team: We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never "no, but…." instead "yes, if….". We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. About The Role Claros Inc. is seeking to hire an exceptional Power Management Integrated Circuit (PMIC) Controls Engineer to join our ASIC team in Torrance, CA. Candidate must be self-motivated individual to contribute to the evolution of Analog/Mixed-Signal (AMS) circuits, covering PMICs (Low-dropout (LDO) linear voltage regulators, Switching regulators, DC-DC Buck Converters), ADC/DAC, PLL, Gate Drivers, and PMIC chip integration). As a Senior level role you'll play a crucial role in system level strategies of Power management ICs from concepts into release to production, collaborating closely with other circuit designers, and leveraging sophisticated tools. What You Will Do In this role, you will be responsible for developing the algorithms for power sequencing, voltage scaling and implementing control loops for stability for PMICs used in a range of applications. • Collaborate with other engineers to define and implement design methodologies and best practices for PMIC design and related areas., • Work with multi-disciplinary teams including control, systems, testing to implement new ideas and in writing the specifications, design, characterization, verification and documentation., • Summarize and interpret results of highly complex performance checks and review it with team., • Use problem solving skills, experience, and supervise the layout circuit designers. Guide them with floor planning and in resolving DRC/LVS errors., • Behavior and transistor level circuit design, simulation and verification of power management blocks including LDO, Switch Mode Power Supplies (buck, boost), voltage reference and other analog circuits meeting power, performance and area specifications., • Work closely with PCB layout engineers to ensure performance and quality of the designs., • Work with team on best packaging approach for design and test., • Datasheet drafting and reviews., • Bachelor's degree in electrical engineering with 3+ years of overall experience in analog/mixed signal IC Design., • Knowledge of semiconductor manufacturing processes and their impact on analog circuit design. Experience in designing circuits in High voltage (BCD) technology processes and FinFET technology (like 12nm and below) is preferred., • Strong background in Power Management and circuit design principles, Buck or switching cap based topology, power converter control theory (voltage mode/current mode, PWM/PFM), Mixed Signal Design, Gate Drivers, PLL & Clock Chip Design., • Must have released at least one full IC design from Concept to release to production., • Good knowledge in device physics and device reliability analysis., • Proficiency in using Cadence IC Design Tools., • Familiarity with industry standard interface protocols such as SPI, I2C, PMBus/SMBus., • Ability to document design techniques, test and verification methodology., • Conduct design reviews, analyze and debug circuits, and perform system-level testing to validate performance and ensure compliance with specifications., • Full chip integration and Top-Level Simulations., • Strong analytical and problem-solving skills, with the ability to debug complex issues., • Excellent communication and collaboration skills to work effectively in a team environment., • Master's degree or higher., • Digital control theory, • Experience using Matlab/simulink, • Knowledge in writing Verilog/VHDL modeling., • Career track opportunity with potential for rapid advancement with strong performance as the firm grows., • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning. Our Red Cell Partners Benefits: • Career track opportunity with potential for rapid advancement with strong performance as the firm grows, • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning. By submitting an application, you acknowledge that Red Cell Partners, LLC ("Red Cell") uses third-party service providers to facilitate its recruitment and hiring processes. These providers include applicant tracking systems, candidate verification platforms, and fraud detection tools (collectively, "Hiring Platforms"). Your application materials, including your résumé, cover letter, work samples, responses to application questions, and any other information you submit, may be transmitted to and processed by these Hiring Platforms for the following purposes: • Managing and administering your application throughout the hiring process;, • Verifying the accuracy and authenticity of application materials, including by cross-referencing information you provide against publicly available sources and proprietary databases; Red Cell requires its Hiring Platform providers to process your information solely for the purposes described above and in accordance with applicable law. Your information will be retained only for as long as necessary to fulfill these purposes and any applicable legal obligations, after which it will be deleted in accordance with Red Cell's data retention policies. For more information about how your data is used, please refer to our Privacy Policy and Applicant Privacy Notice.

Job Description Drive the Future with Xos Xos (NASDAQ: XOS), is a technology company and electric truck manufacturer on a mission to decarbonize commercial transportation. We design and build state-of-the-art electric vehicles, develop advanced fleet management software, and create charging solutions that make fleet electrification seamless and cost-efficient. At Xos, we're problem-solvers, innovators, and go-getters, working together to drive a cleaner, more sustainable future. Join us and be part of the movement shaping the next generation of commercial transportation. The Role Xos is hiring an experienced Field Service Technician responsible for diagnosing, repairing, and reporting on Xos vehicles. Operating primarily in the field, this role requires a high level of productivity and self-reliance while traveling. The Field Service Technician is responsible for taking customers' stated concerns and quantifying those into actionable technical issues. Detailed reporting on the cause, root cause, and corrective actions will drive improved production quality as well as field fix development. Exceptional customer service, knowledge of the complete vehicle, in addition to battery systems, is key to success in this position. Responsibilities • Diagnose, repair, and report on quality and design concerns on Xos vehicles and products., • Collaborate with internal teams such as design, engineering, software, and external partners., • Demonstrate proficiency in low voltage (LV) and high voltage (HV) electrical diagnosis, controls, and module programming., • Apply in-depth knowledge of basic electrical concepts, including the use of various volt-ohm meters., • Possess strong mechanical knowledge of commercial truck mechanical systems with experience in motors and harness systems preferred., • Provide professional customer facing support face-to-face interactions and through phone and email communications., • Complete timely and accurate case notes, repair orders, and initiate new cases as required., • Demonstrate professional appearance and effective communication skills with customers on-site and in remote interactions., • Complete training objectives and certifications as assigned by management., • Perform additional duties as assigned. Qualifications • Proven proficiency with high and low voltage electrical systems., • Associates Degree or Vocational Certificate in automotive service technology related field or 4+ years of relevant experience., • ASE Certifications are a plus, • CDL class A or B preferred, • Proficiency in Google Suite applications, • Ability to read and interpret electrical schematics, • A valid Driver's License and a clean driving record are required for this position, as driving is an essential function of the role., • Ability to meet security clearance requirements for employment and comply with all applicable pre-employment conditions, including those required by federal or customer-regulated work environments., • Must be available to travel as business needs require (typically 60-80% of the time including overnight stays) , including weekends, holidays, and outside standard business hours. The salary range for this role is specific to the locations listed below and is the range Xos Inc. reasonably and in good faith expects to pay for this role at the time of this posting. We may ultimately pay more or less that the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including not but limited to, job-related knowledge, skillset, relevant education, qualifications, certifications, geographic location, and other business or organizational factors. • California (Los Angeles Metropolitan Area): $25.00 - $35.00(+) DOE per hour Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. While performing the essential functions of this job, the employee is regularly required to lift over 50 pounds, perform work under commercial vehicles with the use of personal protective equipment from the ground at various worksite locations, including outdoors and in varying weather conditions. Benefits & Perks Xos is a people-focused company—we are committed to providing our employees with a comprehensive package of benefits and perks designed to support their well-being and professional growth. We continually evaluate and expand our offerings to best serve our team. • Comprehensive Medical, Dental, and Vision - Coverage for you and your family, with PPO and HMO (California) plans available. We offer plans with 100% covered employee premiums. Employees can also enroll in a variety of voluntary ancillary benefits to further support their needs., • HSA & FSA Plans - Set aside pre-tax dollars for qualified healthcare expenses., • PTO - Accrue vacation time over time, with additional days earned as your tenure grows, plus sick time and paid holidays!, • Generous Company Holidays - Enjoy a generous holiday calendar, including a winter holiday hiatus in December., • Basic Life & AD&D Insurance - 100% covered by Xos, with the option to purchase additional life insurance coverage for yourself and eligible dependents., • Betterment 401(k) - Save for retirement with our employer-sponsored plan through Betterment., • Pet Insurance - Coverage for your furry friends to keep them healthy and happy! Commitment to Equal Opportunity Xos is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, gender, pregnancy, sex, sexual orientation, gender identity, gender expression, national origin, age, genetic information, ancestry, protected veteran status, disability, or any other basis protected by local, state, or federal law. Xos provides equal access to services and employment to all qualified persons. For applicants with disabilities or limitations, such as those covered by the Americans with Disabilities Act, requiring accommodations to complete the application and/or interview process, please email us at Candidate Data Privacy This notice describes how Xos (as used in this Notice, the terms "Company," "Xos," "we," "our," or "us" in this Notice refers to Xos, Inc., together with its subsidiaries and other corporate affiliates, who may handle your candidacy and application for employment) may collect, process, and use your personal data in connection with the recruitment process when you apply for a position. Xos may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in the recruitment process ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Xos may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Xos may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform duties, including individuals on our People Operations Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Xos affiliates; and (iii) Xos's service providers, including providers of background checks, staffing services, and cloud services. Where permitted by applicable law, Xos may transfer or store internationally your Candidate Profile Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Notice to Recruitment Services Xos is not accepting applications from third-party recruitment services at this time. Unsolicited resumes or candidate profiles submitted in response to our job postings will not be subject to any referral or placement fees unless a written agreement is in place with Xos for the specific job opportunity.

Job Description With over 40 successful years in business and having over 35 facilities across the USA this engineering firm has been named on the ENR Top 500 Design Firm list and has continued to climb in rank over the years. In addition, they have been named as a certified integrator by many vendors as they do not focus on just one platform, but their engineers will work with the customer choose the best platform for each application. With over 600 employees nationwide they have become one of the largest and established firms in the United States. Reasons to work for this company: • Opportunity to get involved with challenging projects across many different industries, • They offer comprehensive medical/dental insurance, • Profit Sharing/401K match and Employee Stock Ownership Plan Essential Duties and Responsibilities: All areas of responsibility listed below are essential to the satisfactory performance of this position, with reasonable accommodation, if necessary. • Design and implement DeltaV control systems for complex Life Sciences capital projects, • Develop and manage project schedules, budgets, and resources, ensuring on-time and within-budget project execution, • Lead system architecture development and control strategies to enhance manufacturing efficiency, • Design batch sequencing, phase logic, and recipe structures to optimize production efficiency and regulatory compliance, • Develop DeltaV graphics using DeltaV Live and DeltaV Operate in alignment with ISA-101 HMI guidelines, • Utilize a class-based approach in overall design to maximize scalability and standardization across projects, • Develop electrical designs, including power distribution, panel layouts, and grounding strategies for automation systems, • Specify and procure instrumentation and hardware components, • Design and implement industrial networking solutions, including Ethernet/IP, Modbus TCP/IP, Profibus, and Foundation Fieldbus, • Integrate 3rd party equipment with DeltaV systems using protocols such as OPC UA, Ethernet/IP, and Modbus, • Define computing infrastructure requirements, including server architecture, virtualization, cybersecurity, and redundancy planning, • Design, plan, and specify DeltaV system licensing based on user requirements and project scope to ensure cost-effective and scalable solutions, • Oversee the full project lifecycle, from requirements gathering to commissioning and validation, • Ensure project deliveries and execution methodology compliance with GAMP5, cGMP, 21 CFR Part 11, and industry best practices, • Develop acceptance protocols and manage the execution of Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) to validate system performance, • Mentor and provide technical leadership to junior engineers and cross-disciplinary teams, • Coordinate with clients, stakeholders, and regulatory bodies to ensure project success, • Implement advanced automation strategies, including ISA-88 batch processing, historian integration, and alarm management, • Troubleshoot complex automation challenges and drive continuous improvements in system performance, • 12+ years of hands-on experience with Emerson DeltaV systems, focusing on system design and project execution, • Proficiency in DeltaV Live and DeltaV Operate, including experience designing high-performance HMIs and operator interfaces, • Expertise in ISA-101 HMI design principles and high-performance graphic design strategies, • Strong experience in class-based configuration and design, • Expertise in ISA-88 batch processing, historian solutions, and advanced control strategies, • Proven experience managing large-scale capital projects in the Life Sciences industry, • Strong knowledge of automation protocols (HART, Foundation Fieldbus, Profibus, Modbus TCP/IP, Ethernet/IP, OPC UA, IO-Link), • Deep understanding of industrial networking for communication between controllers, servers, and HMIs, • Strong knowledge of cGMP, GAMP5, and regulatory compliance for biopharmaceutical manufacturing, • Experience integrating electrical and process control systems, • Strong leadership, organizational, and communication skills for cross-functional collaboration, • Experience specifying and designing electrical components, including MCCs, VFDs, control panels, and power distribution systems, • Knowledge of server infrastructure and virtualization technologies for robust DeltaV system deployment, • Extensive experience designing and implementing batch control systems within regulated Life Sciences environments, • Experience in OEM system integration using OPC UA, Ethernet/IP, and other industrial communication protocols, • Ability to plan, specify, and manage DeltaV system licensing to optimize project implementation

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. Astrolab is looking for an Application Support Engineer to provide administration, support, and optimization of critical engineering and enterprise applications used across the organization. This role provides technical support for design, simulation, and product lifecycle management (PLM) platforms while ensuring system reliability, licensing availability, and compliance with aerospace regulatory requirements. The ideal candidate has 3–5 years of experience supporting engineering applications within an aerospace or manufacturing environment, along with familiarity with IT service management processes and compliance frameworks such as EAR and ITAR. What you'll do:Engineering Application Support • Provide day-to-day support for engineering applications including Siemens NX, Teamcenter, MATLAB (MathWorks), and Altium, • Troubleshoot application issues, performance problems, and integration challenges affecting engineering teams, • Coordinate with engineering users to resolve software defects, configuration issues, and workflow problems, • Maintain application uptime and performance to support design, simulation, and manufacturing processesLicense Server Administration, • Administer and maintain software license servers for engineering tools, • Monitor license utilization and availability to ensure engineering teams have uninterrupted access, • Work with vendors to troubleshoot licensing issues and manage renewalsApplication Lifecycle & Maintenance, • Install, configure, patch, and upgrade engineering applications and supporting infrastructure, • Maintain documentation for system configurations, troubleshooting procedures, and operational processes, • Support integration between engineering tools and enterprise platforms when applicableIT Service Management (ITSM), • Manage support requests and incidents through the organization’s IT Service Management platform, • Follow established incident, change, and problem management processes, • Maintain service-level agreements (SLAs) and ensure timely resolution of support tickets, • Contribute to knowledge base documentation and operational playbooksCompliance & Security, • Ensure engineering applications and data handling align with Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) requirements, • Support secure handling of controlled technical data and ensure proper system access controls, • 3–5 years of experience supporting engineering or enterprise applications in an aerospace, defense, or advanced manufacturing environment, • Experience supporting:, • Siemens NX or similar tools, • Teamcenter (PLM) or similar tools, • MATLAB / MathWorks, • Altium, • Experience administering software license servers., • Familiarity with IT Service Management (ITSM) processes (incident, change, problem management)., • Understanding of EAR and ITAR compliance requirements., • Strong troubleshooting and problem-solving skills., • Ability to work directly with engineering teams to resolve technical issues. Preferred, • Experience with Microsoft Intune for device and application management., • Experience supporting Oracle NetSuite or other ERP systems., • Familiarity with engineering computing environments, CAD infrastructure, or PLM systems., • Knowledge of scripting or automation for application support tasks., • Regulatory compliance awareness., • Cross-functional communication., • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set up reimbursement, • Fully flexible and remote friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Once a month social hour on-site with food and drinks

Job Description MOTER Technologies, Inc. (“MOTER”) is working to unlock the world of connected vehicle data to power new products and services for the automotive, mobility and insurance industries. Our edge computing- based advanced data analytics and software platform creates new insights from vehicle data to power the next generation of driver scoring, risk analytics, and insurance solutions. Technology and business platforms allow automakers to finally realize their connected vehicle data monetization goals and improve their ROI in this growing space and make driving safer. Job Overview We are seeking a hands-on Software Engineer II with a strong focus on mobile application development to support iOS, Android, and Android Automotive OS (AAOS) platforms. This role will help design, build, and maintain high-quality mobile applications that interface with connected vehicle systems, cloud services, and edge devices. The Software Engineer will develop scalable, reliable, and user-friendly mobile solutions that enable real-time data visualization, driver interaction, and vehicle-centric workflows. As a key contributor, this role will collaborate closely with backend, edge systems, data science, and product teams to deliver end-to-end mobile solutions that support MOTER’s connected vehicle and insurance products. This role requires strong mobile development expertise, ownership of technical deliverables, and the ability to collaborate effectively across teams. Clear communication and the ability to translate complex technical concepts into practical implementations are essential for success. Essential Functions • Mobile Application Development: Design, develop, test, and maintain mobile applications for iOS, Android, and Android Automotive OS using modern frameworks and best practices., • Cross-Platform Development: Build and maintain shared mobile application logic using cross-platform technologies (e.g., React Native) while ensuring native performance, platform-specific user experiences., • Platform Integration: Integrate mobile applications with backend APIs, cloud services, and edge/vehicle systems to support real-time and near-real-time data flows,, • Architecture & Design: Contribute to mobile application architecture, ensuring scalability, performance, security, and maintainability., • UX/UI Design Collaboration: Partner closely with product managers and designers to translate requirements into intuitive, high-quality mobile experiences, contributing meaningfully to UX/UI design using tools such as Figma (or similar)., • Cross-Functional Collaboration: Work with product, UX, backend, data science, and edge systems teams to deliver cohesive end-to-end solutions., • Quality & Reliability: Implement unit tests, integration tests, and CI/CD pipelines to ensure high-quality, reliable mobile applications., • Performance & Optimization: Monitor, profile, and optimize mobile application performance, battery usage, and resource utilization., • Compliance & Security: Ensure mobile applications adhere to security best practices, privacy requirements, and relevant industry standards., • Continuous Improvement: Stay current with mobile development trends, SDK updates, and emerging technologies in iOS, Android, and automotive software ecosystems., • Other Duties: Perform other related duties and responsibilities as assigned. Minimum Qualifications: • Bachelor’s degree in Computer Science, Engineering, or related field required (Master’s degree preferred)., • 3+ years of hands-on software development experience, with a strong emphasis on mobile application development., • Proficiency in mobile programming languages and frameworks, including Java and/or Kotlin for Android development; Swift (and/or Objective-C) for iOS development; React Native for cross-platform mobile development, • Experience developing, testing, and deploying mobile applications to the Apple App Store and Google Play Store., • Familiarity with RESTful APIs, JSON, and mobile-to-backend communication patterns., • Strong problem-solving skills and the ability to work effectively in a fast-paced, collaborative environment., • Demonstrated ability to deliver production-quality software and support multiple releases., • Legal authorization to work in the United States without current or future employer sponsorship. Preferred Qualifications: • Experience developing applications for Android Automotive OS (AAOS) or in-vehicle infotainment (IVI) systems., • Familiarity with cloud platforms (e.g., AWS) and mobile integration with cloud-native services., • Experience with CI/CD tools for mobile development., • Knowledge of mobile security, authentication, and data privacy best practices., • Familiarity with automotive, IoT, or connected device ecosystems., • Exposure to telematics, sensor data visualization, or real-time data streaming in mobile applications. Office Location • Torrance, CA - Hybrid (Tuesday and Thursday in office) Compensation • For California based hires, the annual salary range is $110,000 - $120,000 depending on experience., • Comprehensive benefits package including medical, dental, and vision coverage; basic life and long-term disability insurance; Health Savings Account (HSA); Flexible Spending Account (FSA); generous paid time off and holiday pay; and a 401(k) with company match., • On-demand mental health and medical support through Teladoc., • Complimentary catered office lunches., • Flexible office hours to support work-life balance., • A collaborative culture where your input directly impacts the product and company trajectory., • A health and wellness-focused work environment with team social events., • Business casual dress code. EEO/AA/M/F/Vet/Disability Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. For accommodation or special assistance in applying for a posted position, please contact our Human Resources department at (424)322-9518.

Job Description Symmetrio is seeking for our client, a multi-national medical device company, a Clinical Applications Specialist with a dosimetry background. This position requires a thorough knowledge of treatment planning systems, OIS and clinical workflows within a hospital oncology environment. Candidate must reside in the Western US. The compensation OTE is $160K. Responsibilities: • Provide clinical applications training to customers both onsite and remotely to ensure safe, effective, and confident use of medical technology in accordance with established guidelines and best practices., • Support the management of customer clinical expectations by delivering high-quality education and ongoing guidance., • As appropriate, share customer feedback and competitive insights with internal teams such as marketing, product management, and engineering., • Coordinate and/or lead customer and internal employee training programs., • Deliver presentations to small and large groups at seminars, training programs, conferences, and trade shows., • Develop and maintain complementary training materials, including quick-reference guides, workbooks, video content, and implementation resources., • Collaborate cross-functionally to support service excellence and optimize customer relationships., • Must reside in Western US (CA, OR, WA, NV, AK, HI, MT, ID), • Certified Medical Dosimetrist required; additional RTT license preferred., • Strong clinical understanding of workflows and processes within a medical and/or radiation oncology environment., • Ability to travel extensively (up to 75–100%), including occasional weekends., • Excellent interpersonal and relationship-building skills., • Strong written, verbal, and listening communication skills., • Adaptable, positive, and open to new ideas and changing environments., • Highly motivated self-starter with the ability to work independently., • Eager learner with the ability to quickly absorb and apply new concepts and technologies.