Trabajos welder en Inglewood, CaliforniaCrear alertas

Job DescriptionDescription: Job Title: HVAC Technician Supervisor: Service Manager Hours: Full-Time, OT when needed Schedule: M-F, Rotating weekends and on call Exempt / Non Exempt : Non Exempt/hourly Salary/ Rate of Pay: $20+ DOE DUTIES AND RESPONSIBILITIES: • Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes., • Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers., • Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves., • Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory., • Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines., • Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels., • Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion., • Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment., • Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps., • Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary., • Maintain related records concerning time, labor and materials; maintain log of, • tasks performed and write reports as required., • Perform other duties as assigned., • Maintain regular attendance. KNOWLEDGE AND ABILITIES: KNOWLEDGE OF: • Standard practices of the HVAC and refrigeration trade., • Theory of HVAC and refrigeration systems., • Materials, methods and tools used in the operation and repair of HVAC and, • refrigeration systems., • Applicable building codes, ordinances and regulations of State and local, • authorities pertaining to HVAC, refrigeration and boilers., • Air compressors and pneumatic controls., • Cooling tower and boiler water treatment., • Manual and electrical tools and equipment applicable to the HVAC and, • refrigeration trade., • Welding and soldering techniques., • Health and safety regulations., • Basic record-keeping techniques., • Proper methods of storing equipment, materials and supplies. ABILITY TO: • Perform skilled mechanical maintenance duties in the inspection, repair,, • installation and alteration of District heating, ventilation, air conditioning and, • refrigeration systems and related equipment and facilities., • Calibrate systems., • Perform preventive maintenance and routine servicing of equipment., • Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration,, • and air-conditioning units., • Follow oral and written instructions., • Operate specialized machinery, equipment and tools utilized in the repair,, • installation and maintenance of heating, ventilation, air conditioning and, • refrigeration systems., • Communicate effectively both orally and in writing., • Understand and follow oral and written directions., • Work cooperatively with others., • Work independently with little direction., • Meet schedules and time lines., • Maintain routine records and prepare reports., • Routinely lift objects weighing up to 75 pounds., • Lift heavy objects. PHYSICAL DEMANDS: • Work is performed while standing, sitting, and/or crouching for full shift., • Requires the ability to communicate effectively using speech, vision and hearing., • Requires the use of hands for simple grasping and fine manipulations., • Requires bending, squatting, crawling, climbing, reaching., • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds., • Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day., • Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.Requirements:

Job Description Job Overview We are seeking a highly skilled and motivated TIG Welder to join our manufacturing team. You will be using specialized equipment to weld & assemble new Tube Duct & Sheet Metal. ESSENTIAL FUNCTIONS Perform precision TIG welding on a variety of metals including stainless steel, aluminum and carbon steel. Follow blueprints to meet product specifications Weld process as per AWS D17.1 Prepare and align metal components before welding, ensuring proper fit and measurement. Conduct tests to evaluate weld quality and tolerance Assist in training and developing others within the team Operate welding equipment including TIG machines, grinders, and buffing tools. PROCEDURES AND RESPONSIBILITIES Ensure all welding work meets blueprint, dimensions, tolerances and quality standards. Regulate gas flow and pressure using cylinder gauges or valves. Maintain safety protocols and ensure proper operation of welding equipment Communicate effectively with supervisors, engineers, quality inspectors, and coworkers Responsible for keeping equipment clean and orderly An effective candidate must have the ability to meet tight deadlines and have strong interpersonal skills. Strong analytical and critical thinking skills. Must be detailed oriented. Learn and adhere to company policies and quality processes as well as safety requirements. Excellent written and verbal communication skills Must establish and maintain a professional working relationship with external and internal teams. May perform other duties as assigned. PERIPHERAL DUTIES 1. Interact with organizational team members and other departments in a professional manner., 2. Assists in formulating a strategic plan., 3. Perform other duties as assigned. WORKING CONDITIONS Manufacturing environment; may be exposed to loud noises, unique smells, changing temperatures, machinery with moving parts and other dangers associated with manufacturing (cutting, deburring, etc.). CPI has safety equipment and safety standards in place to help maintain a safe work environment. WORKING HOURS Monday – Friday 7:00 AM – 3:30 PM. Overtime maybe required on an as needed basis. Company DescriptionAerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and SatellitesAerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and Satellites

Job Description Now hiring a TIG Welder for the city of Los Angeles, CA! Job Type: Full-Time Schedule: Monday–Friday 7am-3:30pm (Saturdays & Overtime as needed) Payrate: $19.50 to start (Depending on Experience) Location: Los Angeles We are seeking a skilled and experienced TIG Welder to join our manufacturing team. The ideal candidate has experience welding stainless steel, aluminum, and other metals while producing high-quality welds. The TIG Welder will read blueprints, prepare materials, inspect finished work, and maintain a safe and organized work environment Responsibilities • Perform TIG welding on stainless steel, aluminum, and other metals., • Read and interpret blueprints, work orders, and welding symbols., • Set up and operate TIG welding equipment safely and efficiently., • Prepare materials by cutting, grinding, fitting, and cleaning parts prior to welding., • Inspect completed welds to ensure quality and dimensional accuracy., • Use measuring tools including calipers, tape measures, squares, and gauges., • Perform minor equipment maintenance and report repair needs., • Follow all company safety procedures and OSHA guidelines. Long term - Temp to Hire company! For more information please call 3109350880 Address: 4433 Slauson Ave, Maywood, CA 90270

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will be responsible for helping set up, operate, and optimize K2 Space's development shop. This pivotal role will support development projects which will inform the design of our Mega Class satellite. You will work closely with engineering teams and operations management to fabricate tooling and ground support equipment. You will be highly motivated, detail oriented, and execute at the highest level. Responsibilities • Support the establishment of the K2 Space Development shop, including the selection and initial set up of equipment, • Perform Class A weld quality, including TIG, MIG, and other specialized welding processes, • Process sheet metal utilizing water jet cutting, and various other machine tools, • Operate a wide variety of fabrication equipment (CNC press brake, shear roller, mill, lathe, horizontal and vertical bandsaw, and sanding equipment), • Troubleshoot issues with equipment and perform preventative maintenance, • Identify and self-start projects that improve the overall program success and progress, • Inspect finished products to ensure they meet the highest quality standards, • Communicate with engineering teams and leadership for general alignment, capability, and support prioritization, • Maintain a clean, organized, and safe working environment in compliance with EH&S standards, • Consistently provide process improvement ideas and design feedback to improve manufacturability Qualifications • 5+ years of experience with Class A TIG/MIG welding and thin sheet metal, • 5+ years of experience with sheet metal fabrication and forming experience, • Strong proficiency in GD&T tolerances and technical drawing interpretation Nice to Have • Experience working in a space hardware development program, • Experience working in a high-pace development environment with ability to adapt to short production schedules, • Operate with a high sense of urgency, with strong attention to detail and strong communication skills Additional Requirements • Must be able to work extended hours and/or weekends as needed, • Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or equipment, • Must be able to stand for extended periods of time, • Must be able to lift up to 50 lbs. unassisted Compensation and Benefits: • Hourly rate range for this non-exempt role is $30 – $42 + equity in the company, • Compensation will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description TIG Welder Job Type: Full-Time Schedule: Monday–Friday 7 am - 3:30pm (Saturdays & Overtime as needed) Payrate: $19.50 to start (Depending on Experience) Location: Los Angeles We are seeking a skilled TIG Welder to join our manufacturing team. The ideal candidate has experience welding stainless steel, aluminum, and other metals while producing high-quality welds that meet engineering specifications and quality standards. The TIG Welder will read blueprints, prepare materials, inspect finished work, and maintain a safe and organized work environment Responsibilities • Perform TIG welding on stainless steel, aluminum, and other metals., • Read and interpret blueprints, work orders, and welding symbols., • Set up and operate TIG welding equipment safely and efficiently., • Prepare materials by cutting, grinding, fitting, and cleaning parts prior to welding., • Inspect completed welds to ensure quality and dimensional accuracy., • Use measuring tools including calipers, tape measures, squares, and gauges., • Perform minor equipment maintenance and report repair needs., • Maintain a clean and organized work area., • Follow all company safety procedures and OSHA guidelines., • Collaborate with production and quality teams to meet production schedules.

Job Description JOB SUMMARY: Responsible for the creation and accumulation of first article detailed inspection reports, daily inspection records, tooling inspection reports, welder qualification reports, first piece inspection sign off, and any AS9100D reports. Responsible for forwarding this information to final inspection with detail or assembly parts manufactured to Customer requirements. Also, will perform reverse engineering. MATERIALS, TOOLS, AND EQUIPMENT USED: · All forms of purchased parts and assemblies of vendor or company design in ferrous or non-ferrous metals and other types of materials and supplies. · PCMM (Verisurf 2018) and · Precision measuring instruments such as micrometers, height gauges, dial indicators, calipers, profilometer, thread gauges, pin gauges, and special gauges. Also, fixtures, templates, scales, and inspection stamps. · PCMM (Verisurf 2018), surface plate and accessory equipment, and templates. Computer for utilization of customer portals (Net Inspect, etc.) REQUIRED SKILLS, ABILITIES, QUALIFICATIONS: · Ability to perform reverse engineering and interpret complex blueprints, which are difficult to visualize. · Complete any type inspection of purchased detail parts and major assemblies. · Use precision measuring instruments and hardness testing equipment. · Have a thorough knowledge of all forms of different metals. Have a thorough knowledge of process engineering standards and finish requirements. · Know arithmetic involving addition, subtraction, and conversion of fractions and decimals, and also geometry. · Ability to perform data entry in Microsoft programs. Company DescriptionSince 1949 ACE Clearwater Enterprises has been building complex formed and welded assemblies for the aerospace and power generation industries. We say that "If it flies, we have parts on it". Operating from three facilities within a 10 sq. mile radius in Southern California, our employees are the best problem solving team in the business. ACE is the place for Engineering, Forming, Bending, Welding, Machining , Waterjet and Assembly. We have over 400,000 square feet of pure manufacturing agility and people with the experience to make it happen. www.aceclearwater.comSince 1949 ACE Clearwater Enterprises has been building complex formed and welded assemblies for the aerospace and power generation industries. We say that "If it flies, we have parts on it". Operating from three facilities within a 10 sq. mile radius in Southern California, our employees are the best problem solving team in the business. ACE is the place for Engineering, Forming, Bending, Welding, Machining , Waterjet and Assembly. We have over 400,000 square feet of pure manufacturing agility and people with the experience to make it happen.\r\nwww.aceclearwater.com

Job DescriptionDescriptionAs an Orbital Tube Welder at Impulse, you will be responsible for the precision assembly, welding, inspection and documentation of high-reliability orbital welds used in space flight hardware. This role is hands-on, detail-oriented and critical to delivering flight-worthy hardware on aggressive timelines. Responsibilities • Follow detailed work instructions, engineering drawings, and procedures for flight and development hardware, • Setup, maintain and operate the orbital welding system to produce high quality orbital welds, • Document build steps, nonconformances, and test results in manufacturing and quality systems, • Maintain cleanliness and configuration control of flight hardware, • Work closely with engineers, quality, and other technicians to resolve issues and improve processes, • Support rework, repair, and root-cause investigations as needed Minimum Qualifications • High school diploma or equivalency certificate, • 1+ year of orbital welding, machining or manufacturing experience, • Ability to read and interpret mechanical drawings and GD&T as well as assembly procedures and specifications, • Proficient with hand tools, torque tools, and measurement equipment (calipers, micrometers, torque wrenches) Preferred Skills and Experience • Certification from a formal orbital weld training program, • 5+ years of orbital welding experience using Orbitalum or similar OTW equipment, • TIG welding experience in an aerospace manufacturing environment, • Familiarity with welding stainless steel, Inconel and titanium tubing, • Familiarity developing weld schedules and able to weld parameters based on welding defectsAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Overview Tradesmen International is immediately hiring experienced Welders for projects located in the Rancho Dominguez, CA area. This is a first shift opportunity, and the pay rate is $30-32/hour based on experience and skill level. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Perform high-precision TIG (GTAW) welding on cooling coil systems, • Repair and rebuild UBends, • Grind and reweld joints, • Remove discoloration for proper finish and integrity, • Complete butt welds to connect UBends to fin tubes, • Weld fin tubes to headers, • Install flanges and a 90-degree elbow Responsibilities • All PPE, • Tools, and welding equipment Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description Description: If you have MIG Welder experience and you're looking for a new position ASAP, then this is the position for you! A popular Construction company in Pacoima is looking for a Construction Laborers to join the team! There is a rapid interview process with the company so you can start ASAP! Relevant Skills (not required): MIG Welder / Aluminum – Steel / Fabrication Experience Level: Entry - Expert Level Location: Pacoima Pay: $20-30 depending on experience maybe more Shift: Mon - Fri 5am – 3:30pm Apply right now and expect a call/text from Ryan with Aerotek 😊 Positions with this company are limited and will be filled quickly! Job Type & Location This is a Contract to Hire position based out of Hansen Hills, CA 91331. Pay and Benefits The pay range for this position is $18.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Hansen Hills,CA 91331. Application Deadline This position is anticipated to close on Aug 16, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Welding business searching for Ornamental fabricator welder with experience in welding and fabricating fences, gates, doors, handrails, etc. Minimum 5 years experience. No contractors or subcontractors. Only laborers. Pay is commensurate with experience and work quality. Call to schedule an interview PLEASE CALL 818-849-1026 Negocio de soldadura busca un FABRICADOR con experiencia en soldadura ornamental, y fabricador portones, pasa manos, puertas, etc. Mínimo 5 años de experiencia. Pago es basado es su experiencia y calidad de trabajo. No contratistas, se busca trabajador. LLAME AL 818-849-1026 Tipo de puesto: Tiempo completo Sueldo: $18.00 - $20.00 la hora Consideraciones ante el COVID-19: please wear mask. por favor use mascara. Tipo de puesto: Tiempo completo Sueldo: A partir de $15.00 la hora Consideraciones ante el COVID-19: Please wear a mask. Por favor de usar mascara.

Job Description Job Details Pay Range: $20.00 (plus weekly production bonus) FIRST DAY ORIENTATION: 2:00PM 2ndShift: 3:00pm-1:30am Monday- Friday + Saturday Saturday Shift: 12:30pm-9:00pm Basic Job Functions: 1. Weld low carbon steel working with 16-7 gauges (thin welding) and 0.125”-0.500” wall thicknesses (structural welding). Ideal candidate will be AWS / ASME certified or certifiable., 2. Perform routine maintenance of the MIG welder and related equipment., 3. Perform welding repairs as needed., 4. Weld components in flat and vertical positions., 5. Perform 360 degree welds., 6. Position and secure parts, using hoists, cranes, wire, and banding machine hand tools., 7. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., 8. Detect faulty operation of equipment or defective materials., 9. Monitor the fitting, burning, and welding processes to avoid overheating of parts, warping, shrinking, distortion, pin holes, or blow through., 10. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance to specifications., 11. Complete all paperwork as required at each station., 12. Participate in job rotation through each cell which addresses cross training and ergonomic issues., 13. Assist as necessary to relieve bottlenecks in manufacturing processes., 14. Monitor the output of quality parts through inspection, scrap records, statistical process controls, and station control sheets., 15. Perform 5S activities., 16. Comply with all safety work rules, policies and procedures and best practices. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: • Candidate will be required to complete and pass an internal welding test., • Must have the ability to read and comprehend blueprints, work instructions, safety rules, operating and maintenance instructions., • Must have the ability to write simple correspondence., • Must have the ability to add, subtract, multiply, and divide., • Ability to read tape measure., • Ability to read and understand calibrations., • Must be able to work any shifts and hours (overtime), including weekends. Preferred Qualifications: • 1-2 years of welding experience, • High School diploma, General Education Degree (GED) or equivalent., • Must possess the ability to work with hand tools.

Job Description WELDER ENTRY LEVEL MONDAY - FRIDAY 7:00-330 PM

Job Description Job Description TIG Welder Company: United Employment Solutions, Inc. Location: Torrance, CA Pay: $20.00-$23.00 per hour (DOE) Schedule: Monday-Friday | 7:30 AM-4:30 PM | Occasional overtime as needed Job Type: Full-Time | Temporary Job Summary United Employment Solutions is seeking an experienced TIG Welder to join a growing manufacturing team in Torrance. We are looking for a dependable, detail-oriented professional with strong TIG welding experience who takes pride in producing high-quality work. If you have experience welding stainless steel and aluminum and enjoy working in a fast-paced manufacturing environment, we want to hear from you! Responsibilities • Perform TIG welding on aluminum, stainless steel, and other metal materials., • Read and interpret blueprints, welding symbols, and technical drawings., • Set up and operate TIG welding equipment safely and efficiently., • Measure, cut, fit, and fabricate metal components according to specifications., • Inspect completed welds to ensure quality, strength, and compliance with company standards., • Perform grinding, polishing, and finishing work as required., • Maintain welding equipment and perform routine maintenance checks., • Follow all safety procedures and wear required personal protective equipment (PPE)., • Collaborate with supervisors, engineers, and production staff to meet production goals., • Maintain a clean and organized work environment. Qualifications • Minimum 2+ years of TIG welding experience required., • Experience welding aluminum and stainless steel preferred., • Ability to read and interpret blueprints, schematics, and weld symbols., • Strong knowledge of welding techniques, materials, and fabrication processes., • Experience using measuring tools such as tape measures, calipers, squares, and gauges., • Ability to work independently and in a team environment., • Excellent attention to detail and commitment to quality., • Welding certification is a plus.Company DescriptionAt United Employment Solutions, we are a rapidly growing team that prioritizes quality over quantity in every aspect of our business. Our foundation is built upon the core values of Honesty, Passion, Professionalism, and Respect, principles that are championed by every member of our staff and integrated into every department. We pride ourselves on maintaining a dynamic workplace environment where innovation is the heart of our success. We don't just accept new ideas; we actively thrive on them, and we encourage every employee to contribute their perspective, whether it’s a specific departmental improvement or a visionary concept for the entire company. Beyond a collaborative culture, we offer a comprehensive benefits package designed to support your well-being, including Medical coverage with company contributions, affordable Dental and Vision insurance, and company-sponsored Life Insurance. Our team also enjoys robust time-off benefits, including paid holidays, vacation pay, and five annual sick days. If you are looking for a professional home that values your voice and your growth, we invite you to come join our team!At United Employment Solutions, we are a rapidly growing team that prioritizes quality over quantity in every aspect of our business. Our foundation is built upon the core values of Honesty, Passion, Professionalism, and Respect, principles that are championed by every member of our staff and integrated into every department. We pride ourselves on maintaining a dynamic workplace environment where innovation is the heart of our success. We don't just accept new ideas; we actively thrive on them, and we encourage every employee to contribute their perspective, whether it’s a specific departmental improvement or a visionary concept for the entire company. Beyond a collaborative culture, we offer a comprehensive benefits package designed to support your well-being, including Medical coverage with company contributions, affordable Dental and Vision insurance, and company-sponsored Life Insurance. Our team also enjoys robust time-off benefits, including paid holidays, vacation pay, and five annual sick days. If you are looking for a professional home that values your voice and your growth, we invite you to come join our team!

Job DescriptionTIG WELDER Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a TIG Welder, you will work closely with our engineering and manufacturing teams to fabricate high-precision stainless-steel tubing and structural assemblies used throughout our next-generation metal 3D printing systems. You will perform high-quality TIG welds on thin-walled pipes, tubes, and custom fixtures that supports our internal factory infrastructure. The ideal candidate is detail-oriented, takes pride in craftsmanship, and thrives in a fast-paced environment where quality and reliability matter. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative individuals who love solving hard problems and creating amazing technology! Responsibilities: • TIG welding thin-walled stainless steel tubes, pipes, and other various structures using Miller Syncrowave 180 TIG Welder, • Use of fixturing equipment such as magnetic and corner clamps, • Use of fabrication equipment including miter saws, band saws, and grinders, • Welding structures for the worlds highest throughput metal 3D printing system Basic Requirements: • 3+ years of TIG welding experience, • Experience welding stainless steel and aluminum Preferred Skills and Experience: • 5+ years of TIG welding experience, • Experience with precision welding, • Experience welding in an aerospace environment, • Experience welding thin-walled pipes, tubes, or other various structures, • Ability to perform other fabrication duties in the machine shop if interest / time permits Location: • Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country., • Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated pay range for this role is $30-50/hour, with compensation expectations outside of this range taken on a case by case basis., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Summary of Position: We are looking for welders to work on fabrication, maintenance, and installation of welding projects. Other duties may include maintenance of welding equipment in shop facility. Description of Duties, Including but Not Limited To: · Aluminum MIG welding · TIG welding: steel, stainless steel, aluminum · Sheet metal fabrication · Spot welding: steel, stainless steel, aluminum · Use gas torch for welding, brazing, soldering and cutting · Work with a variety of materials · Measure for dimensional requirements, squareness, flatness, etc., using appropriate tools such as calipers, squares, mics, height gauge, and surface plate inspection · Interpret blueprints, sketches, and drawings and follow written and verbal instructions · Apply appropriate finishing: grinding, sanding, deburring, cosmetics and functional · Maintain tools and equipment · Working hours: 6AM to 2:45PM. (Longer days might be required when we are busy). Job Requirements: · Minimum (4) years welding experience · General math skills · Knowledgeable of various welding and fabrication processes, tools, and equipment. (specify as needed) · Ability to work long hours as needed · Full-time on-site role, available to work in our office in Pacoima, CA daily · Able to lift 50-70lbs as needed · Able to maintain and stay on schedule Company DescriptionThe Scenic Route is a design-build production company that provides services for the entertainment, live event, touring, museum, government and trade show industries. We offer services ranging from master planning, concept design and project management to fabrication, construction and installation. Our customer service and commitment to finding the finest solutions to even the most complex problems have made The Scenic Route one of the most sought-after creative resources in the country.The Scenic Route is a design-build production company that provides services for the entertainment, live event, touring, museum, government and trade show industries. We offer services ranging from master planning, concept design and project management to fabrication, construction and installation. Our customer service and commitment to finding the finest solutions to even the most complex problems have made The Scenic Route one of the most sought-after creative resources in the country.

Job DescriptionHermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: As a Welder, you will play a key role in fabricating, assembling, and joining structural and piping components critical to our production and mission operations. You’ll work closely with engineering and manufacturing teams to execute precise, high-quality welds across a variety of materials, ensuring all products meet rigorous performance and safety standards. This role is hands-on and suited for an experienced professional who thrives in a fast-paced, technical, and safety-focused environment. Responsibilities • Perform precision TIG, MIG, and arc welding on carbon steel, stainless steel, and high-nickel alloys., • Interpret engineering drawings and welding symbols to ensure dimensional accuracy and conformance., • Execute high-precision laser welding on thin-gauge and high-strength alloys, maintaining tight control of heat input, distortion, and weld integrity in mission-critical hardware., • Fabricate, assemble, and pressure-test structural and piping systems supporting aerospace and defense operations., • Maintain compliance with ASME, AWS, and company weld standards, following approved procedures., • Uphold strict safety, cleanliness, and quality standards in all work areas., • Collaborate with engineering, quality, and production teams to resolve fabrication challenges., • Support continuous improvement initiatives and contribute to process optimization. Requirements, • High school diploma or GED; technical welding certification preferred., • 5+ years of experience in aerospace, defense, or high-precision fabrication., • Skilled in blueprint interpretation and all-position welding (flat, horizontal, vertical, overhead)., • Proven ability to fabricate and weld carbon and stainless structures and pipe to spec., • Must pass company-administered weld qualification tests and internal inspections., • Available to work overtime and varied shifts to meet mission timelines., • Physically able to lift 50 lbs, work at heights, and operate in confined or outdoor environments. Preferred Skills and Experience, • 5+ years of GTAW welding experience with stainless, carbon, Inconel, aluminum, or titanium., • Knowledge of ASME Section IX, AWS D17.1, or MIL-STD welding codes., • Experience in aerospace component fabrication or ground support systems., • Skilled in tube and pipe cutting, grinding, and precision assembly., • Familiar with pressure testing, inspection, and NDE methods., • Proficient with precision measuring instruments and quality documentation., • Understanding of welding metallurgy and heat control for high-integrity welds., • Familiarity with advanced tooling and fixturing practices used in precision welded assembly fabrication. Physical Requirements:, • Prolonged periods of sitting at a desk and working on a computer., • Frequent walking through office, manufacturing, and test facility environments., • Occasional standing, bending, or reaching as part of employee engagement or site walkthroughs.U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITYHermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Assemble thin metal structures and large frame structures by use of a welder.

Assemble thin metal structures and large frame structures by use of a welder.

Assemble thin metal structures and large frame structures by use of a welder.

Our client is seeking a skilled and experienced Welder with expertise in MIG & TIG welding processes.

Tradesmen International is immediately hiring experienced Welders for projects located in the Rancho Dominguez, CA area. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career!.

Senior Welding & Structural Inspection Specialist.At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing

Join our relentless pursuit of excellence at Singer Vehicle Design, where every nut, bolt, stitch, and finish matters when we restore and reimagine Porsche 911s into some of the most beautiful and respected cars in the world.

Robinson Helicopter Company is a leading manufacturer of civil rotorcraft with a 50-year history of providing affordable helicopters for a wide range of applications. Robinson Helicopter Company, located in Torrance, CA, is an engineering-focused organization that provides unique, challenging, and exciting opportunities to contribute to the future of vertical flight. We are actively seeking a Welder in our Weld Bay Department, reporting to the Manager of Fabrication and Assembly. This is a full-time, non-exempt position. Eligible for overtime. We offer comprehensive group health plans including Medical, Dental, Vision, and other supplementary plans. We also offer a competitive 401k Retirement Plan. Robinson Helicopter Company is an Equal Opportunity Employer JOB DESCRIPTION: TIG Welders are responsible for the fabrication and welding of aluminum, steel, and stainless-steel parts using the TIG process in accordance with RHC procedures and other data acceptable to or approved by the FAA. TIG Welders certify to AWS D1731 Aerospace Specification as required to manually weld aviation hardware from 0.020" to 0.300" thickness, in all positions. ESSENTIAL FUNCTIONS & COMPETENCIES: TIG welding of aluminum, steel, and stainless-steel components based on the specifications of the blueprints and/or drawings by means of TIG welding in all positions including the use of rotary turntables for welding. Set up machines according to work instructions to trim, size, form, inspect, and GTAW (TIG) weld materials to meet drawing requirements. Inspection of welds for accuracy, an inspection of root side weld defects, visual weld inspection using fillet weld gauges, calipers, micrometers, height gauges, and final weld fixtures. Weld inspection for weld size, face, and root reinforcement, cracks, inclusions, and porosity. Proficiency in pre-heating and post-heating of weld elements. Ability to read and interpret blueprints, drawings, and geometric tolerances. Drawing review for compliance for final dimensions, weld note callouts, base material, and filler material selection. Basic mathematic skills include but are not limited to adding, subtracting, multiplication, division, geometry, and algebra for calculating material fabrication. Full compliance with the Company's DOT Antidrug and Alcohol Misuse Prevention Program. Regular and predictable attendance. Pay Range: $22.00-$26.00/hour

Labor One is currently hiring pipe welders in San Diego, CA at a shipyard.$160 per diem, if eligible. Job requirements include three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficiency in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, TIG welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Pipe welding assessment includes FCAW fillet weld plates: 2F 3F 4F (VT test)Fillet testing shall take 1-2 hours Steel backing butt joint 6X6 3/8" thick: 2G 3G 4G (VT and UT test )All butt joint testing takes a welder an average of 1-2 days Butt joint with ceramic backing 12X8 " thick: 1G 2G 3G (VT and UT test)All butt joint testing takes a welder an average of 1-2 days Simulation: Wraps 2F 3F 36" in length Diagonal 3F 4F 36" in length In and out corners 2F 4F 6" Water tight collar Air arc fillet welds (VT testing)All simulation testing takes average welder 1-2 days GTAW pipe welding assessment 6G position - 2.5 "copper nickel pipe butt joint schedule 40 (VT and bent test) 5F, 4F position - 3" copper nickel pipe sleeve 200 (VT and macro etch test) 5F, 4Fposition - 1" mild steel pipe schedule socket weld 40 (VT and macro etch test)*All pipe testing takes average welder 1-2 days

Pay range: TIG Welder/Level 1: $23.

Job Description Job Summary The Plant Maintenance will be responsible for all aspects of plant repair including: conveyor systems, electrical, plumbing, pneumatics and welding. Job Responsibilities • Utilize all tools safely and in compliance with manufactures specifications. Ensure that all equipment is serviced, repaired and maintained per manufacturer’s specifications and Company policy., • Assist in the scheduling of plant and equipment for work and repair. Adhere to the priorities of work specified by the supervisor to ensure that the operational needs are met., • Know and follow Lock-Out Tag-Out and all safety procedures when working on equipment. Follow all safety and environmental rules and regulations; make corrections on a priority basis. Must comply with company safety rules and regulations. Must wear proper safety equipment (PPE) while working and on plant grounds. Ensure that all items related to safety are identified, logged, and corrective action is taken in a time period that provides the safe operation of the plant., • Ability to utilize crane equipment, hydraulic equipment and specialized tools within the safety limits specified by the manufacture., • Must comply and fill out all necessary daily paper work. Includes daily log, plant repair request, Job Hazard Analysis, Permits, etc, checking in at each plant when you arrive and leave. Checking with supervisor on daily regular basis., • Ability to work scheduled hours, which could include 1st, 2nd or 3rd shifts, or overtime including weekends. Carry a company cell phone and be available to answer phone. Phone is for company business and scheduling. Qualifications • High school diploma or general education degree (GED). Trade school certification, • One year related experience and/or training; or equivalent combination of education and experience. Must be qualified experienced welder, • Must pass a physical welding exam. Knowledge, Skills, and Abilities Experience in pneumatic and hydraulic equipment functions and troubleshooting. Must be familiar with conveyors, belts, gearboxes and drives. Have electrical experience with 120V to 460V 3 phase. Be able to troubleshoot control circuits and change electric motors and components. Data entry computer skills, including work order entry and e-mail. Working Conditions • While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around heavy rolling equipment, • Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors, • Must wear protective equipment while at the location Physical Requirements • Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree, • Exerting 50 – 100 pounds of force occasionally, • Exerting 25 – 50 pounds of force frequently, • Exerting 10 – 20 pounds of force continually, • Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls Legal Notices CEMEX is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. CEMEX will consider for employment qualified applicants with criminal histories in a manner consistent with all local, state and federal laws. CEMEX is an E-Verify participating employer. Arizona Smoke-Free Act. CEMEX complies with the State of Arizona’s Smoke-Free Act (Arizona Revised Statutes § 36-601.01). Smoking and/or the use of tobacco or related products is prohibited in and on CEMEX property as well as any building and/or vehicle owned or leased by CEMEX. CEMEX offers both competitive pay and benefits. Benefits applicable to this position may include, but are not limited to, medical, dental, vision, 401(k), Paid Time Off, and Holiday Pay, as well as a comprehensive wellness program to help keep employees and their families healthy and well. You can learn more about CEMEX Benefits by visiting the CEMEX USA Benefits and Well-Being page. (https://www.cemexusa.com/careers/life-at-cemex/benefits-well-being). EEO Statement - En Español CEMEX es una institución EEO/AA (igualdad de oportunidad/acción afirmativa) y no discrimina en base al sexo, edad, raza, color, religión, discapacidad física o mental, credo, origen nacional, estatus veterano, orientación sexual, información genética, identidad de género, o expresión de género en los programas o actividades los cuales opera. The expected base compensation for this position ranges from $32.55 to $38.16 per hour, depending on, but not limited to, market location, job-related knowledge, skill sets, experience, and education Company DescriptionFounded in 1906, over the last 110+ years' CEMEX has grown into a global building materials company that provides high quality products and reliable service to customers and communities throughout the Americas, Europe, Africa, the Middle East, and Asia. Here at CEMEX we offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee assistance program and retirement plan options, along with over a century of stability to build your next career on! To learn more about our company culture and why you should join us, visit us at www.cemexusa.com/careers. For direct access to CEMEX Career Opportunities, visit us at https://jobs.cemex.com/.Founded in 1906, over the last 110+ years' CEMEX has grown into a global building materials company that provides high quality products and reliable service to customers and communities throughout the Americas, Europe, Africa, the Middle East, and Asia. Here at CEMEX we offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee assistance program and retirement plan options, along with over a century of stability to build your next career on! To learn more about our company culture and why you should join us, visit us at www.cemexusa.com/careers. For direct access to CEMEX Career Opportunities, visit us at https://jobs.cemex.com/.

Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Per Hour Welder - 2Nd Shift Job Description Branch Details Welder 2nd Huntington Park CA 3051.

Welder 1St & 2Nd Shift Job Description Branch Details WELDER Proficiency in various welding processes (MIG) and techniques to join, repair or modify metal components.

Tradesmen International - - Responsibilities: Perform high-precision TIG (GTAW) welding on cooling coil systems; Repair and rebuild UBends; Grind and reweld joints; Weld fin tubes to headers; Install flanges and a 90-degree elbow.

Tank Builder / Welder (Nationwide). Welder plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and "goat"/tractor).

Oshkosh Corporation - - Responsibilities: Fabricates, joins, and/or repairs equipment, fixtures and various types of metal objects and structures using MIG, TIG, stick, or other welding processes; Welds according to specifications and company/customer requirements; Performs minor maintenance duties

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role Hadrian is building the most advanced manufacturing platform in the world. As we win new programs and stand up new factories, the workforce question gets decided early, usually before a contract is signed and almost always before anyone has validated whether the labor assumptions hold. Getting that wrong means delayed milestones, unmet contractual obligations, and a workforce that cannot ramp to meet production. Getting it right is a prerequisite for every program we take on. We are looking for a Workforce Programs Manager to own the scoping of workforce for new Hadrian programs end to end. This is the person who sits with the sales and federal teams while a deal is still being shaped, reads the statement of work, and translates it into a labor model, a headcount plan, a training strategy, and a clear build-versus-partner decision. It is a new function. You are the first hire in it, and it is tied directly to our program and factory expansion roadmap. You will build the labor models that tell us what a program actually costs in people. You will design the training strategy for capabilities we have never run before, including regulated programs like NAVSEA-compliant welder workmanship and new NDT certification tracks. You will own the framework for what Hadrian builds internally versus what we source through partners, and you will manage the institutional partnerships that follow from that decision. You will be the forward-looking input to the Workforce Development organization, working with the team on what is coming so they can scale ahead of demand instead of reacting to it. The right person has been in the room where program commitments are made and understands what those commitments mean for the workforce before anyone else does. They are equally comfortable in a business development review with a prime contractor, building a headcount model in a spreadsheet, and walking a community college president through what a partnership would require. They default to building capability internally and treat partnerships as a deliberate tool, not a first response. What You'll Do Program Workforce Scoping Embed with the sales and federal teams during program pursuit to scope workforce requirements before commitments are finalized Read and interpret statements of work, contract terms, and program milestones, and translate them into executable workforce plans Identify the labor, training, and certification obligations a program creates, and surface the risks and gaps while there is still time to address them Labor Modeling and Headcount Planning Build labor models and headcount plans for new programs and capability expansions, covering Factory Technician, Weld Technician, and NDT Technician roles as well as the indirect and support headcount programs require Validate that labor assumptions in deal and operational models are internally consistent and flow through to real headcount outputs Own the workforce-cost view of a program and defend it to finance, operations, and program leadership Training Strategy for New Capabilities Design the training and certification strategy for capabilities Hadrian has not run before, including regulated programs such as NAVSEA welder workmanship and new NDT method tracks Map external certification and audit requirements into the training plan so compliance is built in from the start Define cohort timing, trainer ratios, and lead times from hire to certified, working backward from program readiness dates Build-versus-Partner Strategy and Partnerships Own the framework for determining whether a workforce need is best met by building internally or sourcing through an external partner, with a default toward insourcing Manage the portfolio of institutional partnerships that follow from that decision, including community colleges, trade schools, universities, veteran programs, and high school pathways Represent Hadrian in partner negotiations, MOU development, and ongoing relationship management, and hold partners to defined quality and output standards Treat partnerships as foundational pre-employment pipeline tools, not a substitute for building Hadrian's own capability Workforce Org Readiness Work closely with the Director of Workforce Development to ensure the Workforce organization is staffed and structured to scale with the program portfolio Provide the forward-looking inputs the WFD org needs to hire, build curriculum, and stand up training operations ahead of program demand Maintain visibility for internal stakeholders into the workforce pipeline across all active and pursued programs What We're Looking For 7+ years in workforce planning, labor modeling, program management, or business development, with demonstrated experience translating program or contract requirements into operational workforce plans Background in or strong familiarity with manufacturing, defense, or government contracting environments Track record of building headcount or labor models for new programs or capability expansions, where the output was an executable plan rather than a strategy document Experience in customer-facing or federal program work, including interpreting a government SOW and presenting a workforce plan to a customer A business and commercial mindset: you understand what Hadrian is signing up for when a deal closes, and you can quantify it Strong cross-functional communication, with the ability to represent workforce realities to program and factory leadership and translate them back to institutional partners Comfort operating where the playbook is still being written Bachelor's degree in Business, Engineering, Workforce Development, Public Policy, or a related field; advanced degree a plus; equivalent experience considered What Will Set You Apart Defense business development or proposal development experience with a workforce or labor component Familiarity with NAVSEA, SUBSAFE, or similar regulated certification and audit frameworks Experience standing up training programs in regulated manufacturing environments Background in advanced or precision manufacturing Experience with workforce development grants, government funding programs, or public-private partnerships Familiarity with community college systems and dual-enrollment or early college program design A genuine point of view on what manufacturing workforce development should look like for the next generation, grounded in what programs actually require rather than how it has always been done Benefits for Full-time Employees Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy Equity ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions. Compensation Range: $150K - $225K

At Parker Hannifin's Bioscience & Water Filtration Division, we provide reliable clean water solutions using advanced reverse osmosis technology.Our Water makers filter, purify, discharge, recapture, and reuse industrial, process, and sea water to meet the highest standards.With over 40 years of exp