Trabajos medical testing en Houston, Texas - Page 8Crear alertas

Job Description POSITION SUMMARY: Under the general supervision of the Laboratory Service Director and according to established policies and procedures, performs various Clinical Laboratory tests in one or more sections of the Laboratory. Analyzes and interprets test results and ensures accuracy of same. Uses technical competencies and judgment to respond and handle situations as they arise. Assists with the Laboratory PI program, ordering of supplies, developing procedures and other areas as needed. Senior technologists assume responsibility for charge duties when the Lab Service Director or Assistant Lab Director is not on-site. SHIFT DETAILS: Service • Consistently supports and communicates the Mission, Vision, and Values of St. Joseph Medical Center., • Upholds the Standards of Conduct and Corporate compliance, • Volunteers to fill shift vacancies and accommodates schedule to meet department needs., • Consistently follows patient and facility guidelines and procedures in performance., • Collaborates with inter and interprofessional colleagues to ensure quality outcomes., • Communicable conditions., • Identifies risks and hazards to patients through various risk assessments, with actions taken to mitigate patient harm., • Other duties as assigned., • Follows the St. Joseph Medical Center Guidelines related to the Health Insurance Portability and Accountability Act (HIPAA), designed to prevent or detect unauthorized disclosure of Protected Health Information (PHI)., • Handles, processes, tests, analyzes, prepares reports on and maintains records of specimens ana patient test results according to established policies and procedures., • Applies knowledge on the clinical significance of test results and according to established procedures, communicates these results to the appropriate medical personnel., • Operates, performs quality control, maintains instrumentation* calibration, maintenance and take function check on following equipment as attached., • Be able to monitor, troubleshoot and/or take correct action., • Inform appropriate personnel when problems arise., • Performs and documents proficiency testing in same manner as patient samples., • Supportive of the compliance program set forth by St. Joseph Medical Center and demonstrated by:, • Upholds the Code of Ethics and Corporate Compliance., • Adheres to and helps to enforce all compliance policies relevant co his/her area., • Maintains competency and knowledge of current standards of practice, trends, and developments., • Enhances the patient's experience by fostering a positive relationship with customers., • Contributes to improving HCAHPS results., • Maintains knowledge of current trends and development in the field., • Promotes stewardship of hospital resources while ensuring quality patient care. Education • Critical thinking and interpersonal skills relevant to area in order to effectively communicate with physicians, health team members, patients, and families., • Ability to prioritize work with minimal supervision, to independently carry out the duties of the position., • Able to communicate effectively, both verbally and in writing., • Basic computer knowledge., • Ability to work under stress to perform effectively in the position., • Demonstrates flexibility and initiative in workflow management., • Medical Laboratory Technician Certification: MLT (ASCP), MLT (AMT) upon hire is preferred. Welcome to St. Joseph Medical Center (SJMC), Houston's first and only downtown hospital delivering world-class care for the last 137 years and looking forward to the next century of exceptional care to Houstonians when they need us most. Whether it's for a scheduled surgery, the birth of a baby, an unexpected emergency, or an outpatient visit, we have staff available around the clock to provide you access to immediate, quality health care. SJMC has been providing health care services to Greater Houston residents for over 130 years, which should give you great comfort in knowing that we have a great tradition of caring for our community. We strive to meet our patients' expectations and encourage our patients to provide us with feedback on how we can help them have the best experience possible while they're in our care. Over the last years we have expanded our services to include the Advanced Wound Care Center, Comprehensive Cardiac and Vascular Services, the Women's Center, the St. Joseph Maternal Fetal Medicine Center, and a Weight Loss Surgery Program, just to name a few. As you work with our physicians, nurses, case managers, educators, and other staff, you will be guided through your health care journey, from diagnosis to treatment, with compassion every step of the way. Diversity, equity, inclusion, and belonging are at the foundation of the care St Joseph Medical Center provides to our community we are privileged to support in all of our employment practices. We do not discriminate on the grounds of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or expression or any other non-job-related characteristic.

Job Description Are we the road to your future? We are currently searching for an experienced Senior Roadway Project Engineer to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, 10 years of relevant experience in roadway design. What you’ll be doing: • Familiarity with calculating plans quantities and engineering estimates, developing construction specifications, and coordinating with subconsultants, • Leading or assisting in the development of project designs and directing EIs and designers to successfully execute and deliver project work, while implementing client focused strategies, • Applying established and well-defined engineering techniques, procedures, policies or standards, • Prepares and modifies reports, specifications, plans, construction schedules, and designs for projects, • Aspires to work in a team environment and is willing to participate in business development efforts and meetings with clients. Work as part of a team to deliver a range of transportation and civil design projects, • Participates in ongoing development, communication and implementation of team concepts, programs and policies. Coordinates work to ensure best practices with all team members, • Attends appropriate team meetings, • Work on detailed engineering assignments including calculations and relatively standard work activities, • Adjusts and correlates data, recognizes discrepancies in results, • Identify and analyze problems using reasoning to arrive at conclusions, • Applies standard practices and techniques to accomplish work assignments, • Understands and adheres to assigned phase and task schedules and budgets to ensure timely and cost-effective completion of project, • BS degree in Civil Engineering from an accredited four-year college or university, • 10+ years relevant experience in roadway design, • Must have proven skills in meeting DOT expectations, schedules and budgets, • TxDOT experience is preferred but not required, • PE is required, • Experienced in DOT design methods, plan preparation, standards, and specifications, • Proficient with OpenRoads Designer, • Strong interpersonal and communication skills, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Austin Houston McKinney Rockwall Round Rock San Antonio Tyler TX #LI-SD1

Job DescriptionAre we the road to your future? We are currently searching for an experienced Senior Civil Project Engineer - Transportation to support our Southwest Region located in Texas. The ideal candidate will be responsible for coordination and oversight of geometric design projects. What you’ll be doing: • Prepares and modifies reports, specifications, plans, construction schedules, environmental studies, and designs for projects, • Evaluates need for design changes and makes appropriate recommendations, • Serves as technical liaison with clients on project efforts and coordinates technical efforts within discipline areas, • Consults with construction personnel concerning design constructability as related to field conditions, sequencing and scheduling of construction activities, • Attends onsite and offsite client meetings. Must be a good communicator, • Uses computer-assisted engineering and design software and equipment to prepare engineering and design documents, • Adheres to company standards for quality assurance and quality control as defined in the quality manual, • Participates in project scoping and fee estimating and proposal preparation, interviews, and negotiations, • Reviews assigned project(s) after award to define project scope, determine work procedures/sequences and develops schedules, budgets, staffing, sub-consultant involvement, and progress billings, • Assigns responsibilities and sees the execution of tasks are begun and completed according to schedule, • BS degree in Civil Engineering from an accredited four-year college or university, • 7-10 years relevant experience with 5 years of experience at the Project Manager level with DOT projects, • Must have proven skills in meeting DOT expectations, schedules, and budgets, • PE required, • Experienced in DOT design methods, plan preparation, standards, and specifications, • Demonstrated capabilities and success in managing medium to large projects, multi-office projects, and/or multiple projects, • Proven leadership, communication, mentoring and client liaison skills, • Proficient with OpenRoads Designer, • Strong interpersonal and communication skills, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Austin Houston McKinney Rockwall Round Rock San Antonio Tyler TX #LI-SD1

Job Description Coordinate, manage, and execute Whole Exome Sequencing (WES) and Whole Genome Sequencing (WGS) product line initiatives, including product planning, strategy, design, roadmap execution, and launch. Formulate strategies for current and future products, create Market Requirements Documents (MRDs) and Product Requirements Documents (PRDs), and oversee the product lifecycle from development to post-launch support. Collaborate with cross-functional teams (Medical Affairs, Sales, Marketing, R&D, Clinical Operations, and Quality Management) to ensure operational and commercial readiness. Commercialize new technologies, such as RNA Sequencing, Optical Genome Mapping (OGM) technologies, leading efforts to develop, launch, and scale innovative solutions that address emerging market needs. Conduct market research and feasibility analyses to identify and capture opportunities for new products, working closely with finance and laboratory teams on costing and value assessments. Gather customer insights through VOC processes, network with Key Opinion Leaders (KOLs), and monitor market trends to inform product design and anticipate future market needs. Publish and maintain the product roadmap, educating stakeholders on its process and execution. Support product marketing teams in creating strategies, messaging, and materials while driving execution roadmaps to scale up genetic testing and laboratory solutions. Monitor competitors and key players in the industry. Lead and manage multiple concurrent projects with varying complexity, overcoming obstacles to ensure success. Minimum Education Requirement: Master’s degree in Biotechnology. Minimum Experience Requirement: 5 years of experience in product management and/or product development in molecular diagnostics, experiencing in launching clinical-grade diagnostic genetic testing products including experience evaluating and launching new technology products, such as transcriptomics and other up and coming genome sequencing and mapping technologies, direct involvement in the launch of research testing for the Undiagnosed Disease Network (UDN) backed by NIH, experience demonstrating proficiency in creating and executing comprehensive product roadmaps, ensuring alignment with business objectives and market needs, experience utilizing Smartsheet, Tableau, Microsoft Excel, Microsoft PowerPoint, JIRA to create, manage, and launch products, experience communicating and presenting complex information to C-suite level executives, with presentations. Travel Requirement: 25% US Domestic Travel

Job Description Location: • First-Year Completion Bonus, • Sign-on Bonus Continuity Global Solutions CGS - Kosovo, LLC (CGS - Kosovo) is advertising in your community for an exciting opportunity to work overseas on a U.S. Government contract in the Eastern European Country of Kosovo -in the city of Pristina. Whether you are just looking for a job in an exciting location with opportunities for growth or simply want to get your foot in the door in Government contracting where we could help you gain or maintain a security clearance – this opportunity is for you! Summary: The Armed Security Guard provides security, installation access control, roving patrols, surveillance, monitoring and overall safeguarding to the installation and its tenants. This is a United States Army installation, which includes all access gym and workout facility as well as a PX, Burger King, and MWR. Requirements • Candidates must be a U.S. Citizen, • If U.S. military experience is included as referenced experience, candidate must have a DD214 within the last 10 years as verification, • May require a U.S. Secret Security Clearance (CGS-Kosovo can sponsor new clearances), • Have two (2) years’ experience in armed security, armed law enforcement, or have performed operations within the Armed Forces, civilian police or commercial security while armed within the past 10 years, • Must have completed a State recognized civilian security or law enforcement academy, or the completion of an armed forces security or law enforcement training program. (Verification of training, such as a training certificate/s or DD214 (honorable discharge) must be provided), • Have a current/active U.S. Passport, • Be willing to undergo an NCIC/FBI criminal background report to include fingerprints. Must have a clean criminal history with no convictions or major traffic offenses, • Must have experience and knowledge of security operations, • Must have experience with basic force protection, • Must have excellent written and oral communication skills, • Must be medically fit and undergo medical testing, • Must pass a Physical Ability Test (to include - run 1.5 miles in 17:30 minutes and 21 pushups in two minutes). This is strictly enforced, and exceptions or waivers will not be allowed, • Must be willing to undergo random drug testing upon request, • Regular working hours are 48 hours per week. Due to the nature of the proposed employment, the employee may work on different schedules on different days of the week as assigned by a supervisor and may also be required to work additional hours beyond scheduled time, • Physical Requirements/Working Environment:, • The candidate must maintain the necessary physical fitness to ensure accomplishment of assigned missions. This includes guard duties under local types of weather and terrain. The candidate must meet all physical and medical requirements as dictated by the U.S. Government client's contract.

Job Description Who We Are Worldwide Oilfield Machine (WOM) is a global manufacturer of premium flow control and pressure-containment systems. With over four decades of engineering and manufacturing expertise, we deliver reliable, innovative, and cost-effective solutions to the oil and gas industry. We are seeking a Quality Engineer to support the Elastomers team at our Northwest Houston facility. The role focuses on quality control, compliance, and manufacturing support for rubber seals used in RAM and annular BOPs, following API and ISO quality standards. Key Responsibilities: • Create and manage NCRs; follow up on dispositions., • Oversee manufacturing-related quality requirements for elastomer molding, inspection, assembly, and testing., • Ensure manufacturing processes comply with API 16A, ISO 9001, ASME, and related standards., • Review inspection reports and verify product conformance., • Create and manage TPI POs and Inspection & Test Plans (ITPs)., • Conduct contract reviews and hold kickoff meetings with customers and TPIs., • Monitor job packet completion and ensure full final traceability prior to assembly., • Coordinate customer and TPI involvement for assembly and testing., • Witness hydrostatic testing and review test charts., • Maintain calibration logs; coordinate external calibrations as required., • Investigate customer complaints and support corrective and preventive actions., • Perform internal audits to ensure readiness for API and ISO recertification audits., • Develop and maintain a quality management system (QMS) to ensure successful API and ISO audits., • Conduct supplier audits and support vendor-quality issues., • Bachelor’s degree in Mechanical Engineering., • 2–3 years of quality engineering experience in oil & gas; elastomer/polymers experience preferred., • Experience working in an API 16A or ISO 9001 environment., • Familiarity with API, ISO 9001, ASME, ASTM standards., • Experience with root cause analysis, risk assessment, and CAPA., • Ability to analyze data and identify trends., • Strong documentation and attention to detail., • Proficiency with MS Office (Word, Excel, PowerPoint, Outlook). WOM employees enjoy a fast-paced environment, where your day-to-day contributions make a real impact on the organization. We enjoy celebrating cultural diversity and success as a team. We provide an excellent compensation and benefits package, including medical/dental/vision insurance, a 401(k) plan with company match, short- and long-term disability, paid holidays, vacation and more.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a dynamic and experienced Senior R&D Engineer to lead projects and design new products for Panelmatic’s power distribution division. The ideal candidate will bring a deep technical knowledge of switchgear and switchboard design, a passion for mentoring engineers, and a strong understanding of industry standards and requirements. Requirements Job Duties: • Design, create, and develop complex mechanical assemblies for multiple product lines, • Create drawings for parts, weldments, and assemblies, • Create test samples for projects, • Order material, obtain quotes from suppliers, and order parts, • Develop BOM for test samples and standard configurations, • Release BOM for test samples, • Create Standard configurations upon completion of testing, • Assist in the development of test plans, product documentation, and training documents, • Interact with nationally recognized test labs to coordinate test schedule and execute, • Manage time effectively and reallocate as necessary with minimal input from supervisors, • Seek opportunities for cost savings and increased efficiencies, • Attend IEEE conferences to develop and maintain a presence within the industry, • Use of DFM in R&D design, • Support the creation and maintenance of standard designs and configurations, • Provide support to manufacturing regarding product related questions and issues, • Provide technical support to purchasing and strategic sourcing as required, • Interact with organization to provide technical assistance as needed, • Communicate project status, including possible issues, with key stakeholders, • Support the creation and maintenance of engineering systems and processes, • Mentor and guide others on the R&D team Minimum Qualifications: • BS in Mechanical Engineering with 5+ years of experience in medium voltage switchgear and switchboard design, • Knowledge of the typical mechanical design of medium and low voltage switchgear and switchboards, • Experience designing parts for sheet metal fabrication, • A strong level of understanding in the mechanical design of switchgear and switchboards including clearances required at different voltage levels, • Strong knowledge of ANSI, ASME, NEC and UL standards, • Advanced proficiency in AutoCAD, Inventor and SolidWorks required, • Strong organizational and time management skills required, • Ability to work in a multi project multitask environment with changing priorities required, • Analytical abilities and problem-solving skills required, • Excellent communication skills both written and verbal required, • US work authorization without sponsorship required, • Growth mindset with the ability to accept challenges required, • Ability to physically push, pull, and lift 50lbs or more required Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K benefits, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages

Job Description Corporate Director of Behavioral Health Services Location: Houston, TX (Corporate Office) Reports to: Vice President of Clinical Services ABOUT NEXUS HEALTH SYSTEMS For more than three decades, Nexus Health Systems has been a national leader in providing specialized medical and behavioral care for individuals recovering from brain injury, neurological disorders, and complex behavioral health conditions. Through our network of hospitals and residential programs across Texas, Nexus bridges medical and behavioral care — ensuring that every individual receives personalized, compassionate treatment designed to restore independence and quality of life. At Nexus, we’re mending minds and rebuilding lives. POSITION SUMMARY The Corporate Director of Behavioral Health Services provides strategic, clinical, and operational leadership for Nexus Health Systems’ behavioral health programs across all facilities. Reporting directly to the Vice President of Clinical Services, this position is responsible for ensuring consistent standards of care, program alignment, and clinical excellence system-wide. This leader will oversee behavioral health program development, implementation, and evaluation; support multidisciplinary teams; and ensure that all services adhere to Nexus’ mission, evidence-based practices, and regulatory compliance standards. The Corporate Director will also serve as a resource for clinical consultation, training, and program performance improvement. Candidates with BCBA certification or licensed behavioral health credentials (LPC, LCSW, or Psychologist) are encouraged to apply. PRIMARY RESPONSIBILITIES * Provide corporate-level oversight of all behavioral health programs across Nexus Health Systems facilities, ensuring high-quality, patient-centered care and program consistency. * Collaborate with clinical and operational leadership to design, evaluate, and enhance behavioral health programming in alignment with organizational goals and best practices. * Develop, review, and maintain Nexus’ Programming With Purpose (PWP) model to reflect current evidence-based interventions and regulatory standards. * Provide clinical consultation and direction for patient treatment planning, including behavioral interventions, family support, and interdisciplinary coordination. * Offer ongoing training, mentoring, and performance evaluations for behavioral health teams across facilities. * Monitor, analyze, and report on program outcomes, quality metrics, and compliance data to ensure continuous improvement and regulatory readiness. * Serve as an advocate for behavioral health initiatives and represent the department in strategic planning, policy development, and leadership meetings. * Oversee the hiring, onboarding, and professional development of behavioral health program staff. * Participate in complex case reviews, crisis resolution, and consultation for high-acuity patients when needed. * Foster a collaborative, innovative, and supportive work environment consistent with Nexus’ mission and values. QUALIFICATIONS Education: * Doctorate (Ph.D., Psy.D.) in Behavioral Health, Psychology, Counseling, or related field preferred. * Master’s degree in Social Work or Applied Behavioral Analysis with BCBA certification will be considered. Licensure/Certification: * Active licensure as a Licensed Psychologist, LPC, LCSW, or BCBA (in good standing in the State of Texas). * Current AHA BLS/CPR certification (or must obtain within 30 days of hire). * Must maintain annual TB testing and other facility-required health compliance standards. Experience: * Minimum five (5) years of progressive leadership experience and program development in behavioral health, preferably within hospital, neurorehabilitation, or residential settings. * Demonstrated success in managing multidisciplinary teams and developing behavioral health programs. * Strong knowledge of clinical care standards, trauma-informed practices, and behavioral intervention strategies. * Experience with data-driven quality improvement and outcomes management. WHY JOIN NEXUS At Nexus Health Systems, you’ll be part of a mission-driven organization that values integrity, compassion, and collaboration. We offer competitive compensation, comprehensive benefits, and professional growth opportunities within an expanding national healthcare network. Together, we’re mending minds and rebuilding lives.

Job Description Position Type: Part-time, exempt Job Location: In-person Company Overview Leading the charge in healthcare innovation, Theoria Medical offers a unique blend of medical excellence and technological advancement, primarily serving the post-acute and primary care sectors. Our extensive network includes multispecialty physician services and RPM, covering skilled nursing facilities across the country. In our national push for expansion, we're scouting for the brightest nurse practitioners and physicians eager to drive change and deliver superior care. Join us for a rewarding career that promises professional growth, flexibility, and the chance to shape the future of healthcare. Job Highlights • Work-Life Balance: Competitive compensation with balanced hours., • On-Call Freedom: No on-call, • Always Supported: NP/PA support at all locations, always., • Pre-Screened Patient Interactions: Virtual care team and APP triage before physician contact., • Flexible Scheduling: Your schedule, tailored to fit your life. No set daily shift times., • No Overnight Duties: Sleep peacefully with no overnight call/requirements., • Effortless documentation: Conversational and Dragon dictation., • Meaningful Connections: Establish lasting relationships with patients and staff., • Culture of Appreciation: Your work is valued and rewarded., • $1,500 CME and Conference Allowance: Invest in your growth., • Full Gear: iPad with LTE, • Licensure Reimbursed: We cover your medical licensure costs., • Malpractice & Tail Covered: Full insurance peace of mind., • Benefits: 401k match, Medical/Dental/Vision, Disability, Employer-paid Life Insurance., • Relocation Help: Assistance for a smooth move., • Referral Bonus: Earn more by expanding our team., • Travel Reimbursed: Gas and mileage for work travel., • Career Advancement: Leadership opportunities promoted., • The physician serves as medical director for skilled nursing facilities (SNF) and participates in administrative and quality initiatives for the facilities he or she is responsible for;, • Medical directorship functions include attending and participating in monthly quality assurance and process improvement meetings; participating in quality improvement initiatives; providing guidance to facility staff; reviewing and revising (if necessary) facility's clinical guidelines; insuring compliance with state and federal regulations, training facility staff; and supervising facility clinical staff., • In addition to the medical director role, the physician also serves as the attending physician for the residents residing at each facility;, • The physician collaborates with Nurse Practitioners and Physician Assistants to manage day to day resident care at each facility. Typically, each facility will have a full-time PA or NP assigned to the facility depending on the acuity and volume of the patient population;, • Physician will provide high quality, patient-centered, comprehensive primary care services by rounding on patients residing in SNFs;, • Physician is responsible for diagnosing and treating patients with acute illness, such as bacterial and viral infections, as well as chronic diseases and conditions, such as hypertension, heart disease, or diabetes, • Provider documentation is completed in Theoria's proprietary electronic health record (EHR) system, ChartEasy™, • PointClickCare, MatrixCare, and American HealthTech are the most commonly used facility EHR systems, • Participating in Theoria's Chronic Care Management, Transitional Care, RPM and other medical quality initiatives and programs, • Physician must be able to supervise collaborating nurse practitioners and physicians assistants, • Shifts are flexible depending on physicians' schedule;, • Typically, medical directors work a minimum of 2-3 days/week at each facility they oversee;, • Rounding times are flexible with no set start and end time. Preferably, physicians start in the morning between 7-10 a.m. and finish their day when their caseload has been seen;, • No nights, or on-call, • Call is covered by Theoria's virtual care team, • Competitive compensation package, including Medical Director stipend Theoria Medical conducts background screening and pre-employment drug testing on job candidates upon acceptance of a contingent job offer and may use a third party administrator to conduct background screenings. Background screenings are performed in compliance with the Fair Credit Report Act. Pre-employment drug testing, fingerprinting or other screening may also be required for certain types of positions at the Theoria Medical (ex: direct-patient care) or where required for compliance with state or federal laws, contracts or grants. #LI-Onsite #LI-JT1 #TSMD2

Job Description Supreme Integrated Technology is looking for candidates who want to take the next step in their career to join our 100% employee-owned company. SIT’s engineering expertise transforms ideas into success for hydraulic and electric-powered movable structures. SIT specializes in custom systems and projects, making every project unique and offering the opportunity to solve challenging problems for customers. Our projects are typically for marine, oil & gas, defense, civil (movable bridges), and industrial power unit applications. We pride ourselves on a culture of teamwork - because we are a smaller company you have the opportunity to be involved in every aspect of a project and make an impact from start to finish. The Valve Automation Engineer is accountable for researching, planning, and preparing accurate and efficient technical proposals for product designs, modifications, changes and/or upgrades to valve automation projects. As well assist project management, local management and engineering with technical knowledge and expertise to fulfill customer requirements and project deadlines. Specific responsibilities and Authorities may include: • Assist Production Engineering Manager with managing of valve automation projects,, • Acts as engineering support for Project Management on valve automation projects,, • Work independently on small and medium projects, require supervision for only more complex problems., • Confident and capable of handling client communications and face-to-face meetings., • Competent in system troubleshooting and problem-solving during testing and commissioning., • Independent in specifying components, sourcing, and finding alternative products to meet project deadlines or customer requirements., • Assist Sales Department with calculations, sizing, and specifications., • Prepare Shop Manufacturing drawings., • Prepare layouts and various drawings of parts and assemblies using conventional and limited CAD techniques and a working knowledge of the terms and procedures requiring the use of mathematical formulas to compute weights, dimensions, quantities of materials, etc., • Make final sketches checking dimensions of parts, materials to be used, relationships of one part to another, and relationship of various parts., • Work from sketches, customer drawings, actual visual review, and verbal information supplied by an engineer or designer and determine the appropriate views, detail drawings, and supplementary information needed to complete assignments., • Participate in on-going product improvement/cost reduction., • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application., • Research required information from technical guides and client requirements to identify/understand testing requirements per industry and classification society standards where applicable., • Support and participate in the organization’s continual improvement program to conform to ISO 9001 and understand the implications of not complying with the quality management system. Education and Training: • Bachelors’ degree in Mechanical Engineering., • 2-6 years of experience in engineering., • Experience working in an ISO 9001 environment a plus., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Knowledge of hydraulic fluid conveyance systems, hydraulic assembly and testing., • In-depth knowledge of symbols and drafting techniques., • Software proficiencies include AutoCAD, Solidworks, Microsoft Word, Microsoft Excel, and Microsoft Outlook., • Ability to efficiently operate CAD workstation requiring use of a personal computer and drafting and design software – including mechanical drawings and plotting devices., • Ability to make sketches checking dimensions of parts, materials to be used, relationships of one part to another, and relationship of various parts to whole structure of project., • Ability to interact positively with all levels of management. • Ability to work under pressure of schedules., • Fluency in verbal and written English language., • Ability to communicate clearly with all types of individuals., • Ability to read, interpret and comprehend technical and legal specifications, reports and procedures., • Ability to effectively present information and respond to questions from groups of managers, clients, customers and certification authorities., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to perform engineering design calculations., • Ability to solve practical problems and deal with a variety of situations where limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Able to regularly lift and/or move up to 25 lbs. and occasionally lift and/or move up to 50 lbs., • Able to use close vision, distance vision, depth perception, and adjustment of focus., • Able to work flexible hours., • Occasional exposure to a production environment., • Displays attention to detail., • Produces error-free work., • Is deadline-oriented., • Makes sure that customers’ requests come first., • Is a self-starter who thinks of innovative, faster ways to accomplish tasks., • Works with minimal supervision., • Is flexible and able to adapt to our dynamic environment. As contracts with the U.S. government have required this position to be held by a U.S. citizen, please confirm status as a U.S. citizen. Benefits We offer a competitive salary and benefits package, including medical, dental, vision, life and disability insurance, and 401(k) plans with company match. A unique benefit SIT offers as part of Employee Owned Holdings, Inc. is an employee stock ownership plan. What is an ESOP? ESOP is a special retirement program that allows employees to own stock in the company. When you join EOHI, you automatically begin investing in your future (without having to purchase shares). We are a high growth company committed to training our employee owners to develop their skills and advance in their careers. • Studies also show that retirement account balances for ESOP companies are 2.5 times higher., • ESOP companies grow 2.5 times faster than those companies without employee ownership., • Research shows employee owned companies are superior in performance, employee benefits and employee morale because everyone is working towards a common goal.

Job Description At Compu Dynamics, we don't just build infrastructure—we create the backbone of the digital future. As North America's premier technology infrastructure design-build partner, we design, construct, and maintain mission-critical data centers for some of the world's most innovative companies. With roots in one of the fastest-growing data center markets in the world, our growth is as intentional as our impact. About Compu Dynamics Modular Compu Dynamics Modular (CDM) is at the forefront of innovative modular solutions, specializing in Modular Data Centers (MDC), metal frame systems, and fully integrated enclosures. Our designs are scalable, efficient, and sustainable, tailored to meet the evolving needs of our clients in a dynamic industry. Summary/Objective: The Vice President of Modular Manufacturing is responsible for launching and leading Compu Dynamics Modular's (CDM) state-of-the-art modular data center manufacturing facility. This executive role combines strategic leadership with operational execution to spearhead CDM's transition from traditional modular construction to precision manufacturing of cutting-edge AI/HPC infrastructure. The VPMM will lead all aspects of facility planning, organizational development, operations, engineering integration, and cross-functional alignment—ensuring on-time, high-quality delivery of world-class modular solutions. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. 1. Strategic Facility Development & Operational Launch • Lead the full lifecycle of facility design, development, and commissioning., • Define and execute the operational blueprint, manufacturing workflows, layout, and equipment selection., • Launch manufacturing capabilities supporting GPU-optimized modules, integrated power and network systems, and liquid cooling solutions. 2. Executive Leadership & Organizational Development • Build and lead the modular manufacturing division, including engineering, production, QA/QC, logistics, and safety., • Develop and implement the full organizational structure; hire and mentor high-performing teams., • Drive a culture of accountability, safety, quality, and innovation throughout the organization. 3. Operational Excellence & Production Oversight • Oversee all production domains including welding, painting, mechanical/electrical integration, testing, and final module shipment., • Establish robust operational systems including ERP, inventory control, and capacity planning., • Implement lean manufacturing and Six Sigma principles to optimize throughput and minimize waste. 4. Quality, Compliance & Safety Systems • Develop rigorous QA/QC processes for high-density computing environments and complex infrastructure modules., • Maintain ISO 9000 and other relevant certifications, ensuring compliance with all regulatory and industry standards., • Promote and enforce a culture of continuous improvement, safety, and operational discipline. 5. Strategic Planning & Cross-Functional Integration • Align manufacturing strategy with CDM's business objectives, collaborating with executive leadership, engineering, sales, and project teams., • Lead forecasting, budgeting, and P&L management for the manufacturing division., • Develop vendor-agnostic integration practices with support for diverse OEM platforms. Competencies: • Visionary leadership with proven executive experience in manufacturing or modular construction., • Expertise in modular data center fabrication and complex mechanical/electrical systems integration., • Exceptional cross-functional collaboration and communication skills., • Deep understanding of lean manufacturing, ISO compliance, and AI/HPC infrastructure requirements., • Financial and strategic acumen including P&L ownership and budget management., • Strong track record in facility launch, team scaling, and sustainable growth. Supervisory Responsibility: This role has executive responsibility for all manufacturing personnel and operations. The VPMM will initially lead the hiring and development of a 25+ person team across production, engineering, QA/QC, and logistics—with potential for future expansion. Travel: Up to 20% for vendor coordination, site visits, executive meetings, and industry events. Required Education and Experience: • Bachelor's degree in Engineering, Construction, Manufacturing, or related field., • 10+ years of senior/executive leadership experience in modular manufacturing, prefabrication, or industrial facility operations., • Experience launching new manufacturing facilities or product lines from concept to full-scale production., • Demonstrated success leading multidisciplinary technical teams across engineering, logistics, and production., • Background in quality systems (ISO 9000+), lean principles, and modular integration technologies. Preferred Education and Experience: • Advanced degree (MBA, MS in Engineering or Operations)., • Experience in data center, critical infrastructure, or high-tech modular environments., • Familiarity with liquid cooling systems and advanced thermal management., • ERP implementation experience and vendor-agnostic manufacturing leadership., • Recognized certifications in operations, quality, or safety (e.g., Six Sigma Black Belt, PMP). Physical Demands: While performing the duties of this job, the employee is regularly required to walk manufacturing floors, climb stairs, and inspect equipment installations. Must be able to lift materials up to 50 pounds occasionally and work in manufacturing environments with varying temperatures, noise levels, and safety requirements. Requires extended standing and walking on manufacturing floors. Position Type: This is a full-time, exempt position. EEO Statement: Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type will not be tolerated. Other Duties: Please note this job description is not designed to cover or contain a comprehensive list of activities or responsibilities that may be required. Duties and responsibilities may change at any time with or without notice. Military Codes: 120A, 6042, & 5915 #PM23 Compu Dynamics Pay Range$180,000—$250,000 USD Compu Dynamics offers a comprehensive benefits package that supports the health, well-being, and growth of our team members. Full-time employees are eligible for: * Medical, Dental, and Vision Insurance – effective the first of the month following hire, with plans currently offered through Cigna. * 401(k) Retirement Plan – automatic enrollment at 3% on your date of hire; company match up to 4% (with a 7% contribution needed to receive the full match), plus profit-sharing opportunities. * Employer-Paid Life Insurance – coverage equal to 1x your salary. * Short-Term Disability (STD) – fully paid by Compu Dynamics. * Voluntary Benefits – including Long-Term Disability, supplemental life insurance (employee, spouse, children), Accident, Critical Illness, and Hospital Indemnity coverage. * Paid Time Off (PTO) – accrue up to 160 hours (4 weeks) annually, beginning after 60 days of employment. * Paid Holidays – 7 company-observed holidays plus a floating holiday. * Birthday Time Off – 8 hours of paid time off during your birthday month. * Paid Parental Leave – 8 weeks maternity leave and 2 weeks paternity leave, concurrent with FMLA. * Volunteer Time Off (VTO) – 40 hours annually for community service. • Boot Reimbursement – up to $150 annually, available from your first day. Tool Reimbursement – $250 annually, available after 60 days. * Tuition Reimbursement – up to $5,000 annually for approved educational programs. Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of these characteristics. All employment offers are contingent upon successful completion of our pre-employment drug screening, background/criminal check, and motor vehicle check.

Job Description The System Analyst will play a key role in enhancing Perry Homes’ enterprise systems through Dynamics 365 Finance & Operations. The System Analyst will gather requirements, analyze business processes, and connect technical teams with business stakeholders to deliver effective, scalable solutions. Working closely with the IT PMO and teams across Finance, Supply Chain, and Operations, this role supports the design and implementation of smart system improvements that drive efficiency, innovation, and business growth. Essential Duties and Responsibilities • Collaborate with product owners and stakeholders to define, prioritize, and deliver features aligned with the product roadmap., • Gather, document, and refine business requirements, user stories, and workflows to ensure clear communication between business and technical teams., • Lead workshops and translate business needs into functional specifications for engineering and quality assurance teams., • Configure and maintain Dynamics 365 Finance & Operations to support evolving business processes and operational needs., • Support user acceptance testing (UAT), troubleshoot issues, and ensure successful implementation and go-live of new capabilities., • Develop and maintain process documentation, training materials, and user guides to support system adoption and ongoing improvements., • Perform post-deployment reviews to identify enhancement opportunities and maintain system optimization., • Other duties as assigned. Job Competencies • Customer/Client Focus, • Communication/Building Relationships, • Time Management, • Flexibility, • Business Acumen, • High school diploma or equivalent required; associate degree in IT or related field preferred., • 2+ years of experience as a Systems Analyst or Functional Consultant with Dynamics 365 Finance & Operations, • 2+ years working in Agile teams (Scrum, Kanban, etc.)., • Strong analytical, communication, and problem-solving skills, with a talent for turning business challenges into effective technical solutions., • Detail-oriented individual with a proven ability to meticulously analyze data, processes, and systems to identify inefficiencies and implement precise, effective solutions., • Strong business analysis skills to elicit, visualize, and document business requirements in the form of user stories., • Skilled in refining requirements with business and IT stakeholders by creating process maps, wireframes, and mockups, and documenting them in Azure DevOps or similar tools., • Comprehensive expertise in Dynamics 365 F&O, paired with strong communication skills to discuss technical matters with engineers and assess various technical options., • Adept at switching between strategic discussions and detailed technical explorations., • Strong communicator; at ease when leading meetings and sharing insights with colleagues throughout the organization., • Demonstrated capability to develop and sustain trusted partnerships with cross-functional stakeholders across all organizational levels., • Skilled at handling multiple tasks efficiently, staying organized and precise, and meeting deadlines in fast-paced environments. Health & Wellness • Medical, Dental & Vision Coverage, • Employee Assistance Program (EAP), • 401(k) with Company Match, • Company-Paid Life & Disability Insurance, • PTO & Paid Holidays, • Perry Homes Family College Fund, • New Home & Employee Discounts, • Pet Perks, Travel Assistance, & More Perry Homes is an Equal Opportunity Employer Disclaimer: Recruitment Fraud – Any communication regarding job opportunities from our organization will be initiated through official channels only, including our company email domain, @perryhomes.com and verified social media accounts. We advise candidates to exercise caution and refrain from sharing personal or sensitive information with any party claiming to represent our company outside of these channels. We do not at any early stage of recruitment process solicit personal information (e.g., passport and bank account info), financial details, or any form of payment (e.g., application fee). If you receive suspicious communications, encounter job postings that appear fraudulent, or want to confirm any employment postings, please contact .

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. The Construction Project Coordinator is an integral member of the Econolite Systems team responsible for coordination of ITS and traffic signal construction and maintenance projects primarily located in the Houston area. DUTIES • Provide support to the management team in the coordination and oversight of construction and maintenance projects, • Oversee maintenance management software data entries for billing of maintenance contracts on time & material basis, • Prepare project records with labor and equipment hours and inventory utilization details for project billing, • Prepare project change orders, and work orders / task orders for maintenance activities, • Obtain pricing from vendors for projects and work orders; prepare associated procurement requisitions;, • Write project status reports for submission to customers, • Use Microsoft Project (or similar) to prepare project schedules for presentation to customers, as well as to monitor staffing needs and remaining project working days, • Obtain material & equipment product datasheets and prepare material submittals for project approval by customers, • Review construction plans and prepare quantity takeoffs, • Conduct field reviews as needed for estimating, planning and verification of completed project work, • Streamline inventory processes for maintenance & construction projects, • Perform other duties as required and assigned QUALIFICATIONS • Bachelor’s degree in construction management or engineering, or equivalent combination of education and experience, • Proficiency in Microsoft Project (or equivalent), Excel, Word, PowerPoint and Adobe Acrobat, • Traffic Signal and Transportation Systems experience is preferred but not mandatory, • Strong organizational and project management skills, • Effective oral, written communication and interpersonal skills, • Ability to work as part of a cooperative team, • High customer service orientation BUSINESS TRAVEL May include travel within Texas and / or within the US. PRE-EMPLOYMENT All candidates who accept employment will be subject to a background investigation and drug screening. For applicable roles, candidates who accept employment will also be subject to a Motor Vehicle/Driving Record screening. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Other voluntary benefits include: identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran's status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job Description Job Title: Applications Security Administrator Location: Houston, TX Employment Type: Full-Time | Exempt 100k-150k Benefits: This position is eligible for medical, dental, vision, 401(k), disability leave, bonus program, and PTO. About the Role: We are seeking an experienced Applications Security Administrator to join our IT team. In this role, you will be responsible for securing enterprise applications, managing user access, and supporting audit and compliance activities. You’ll play a key role in implementing and maintaining identity and access management tools, with a strong focus on SOX compliance, enterprise security tools, and application security best practices. Key Responsibilities: Security Management: • Administer and monitor user access across enterprise applications and systems, • Lead and manage the implementation of identity and access management tools, • Ensure compliance with SOX requirements related to application security and access controls., • Monitor application security logs for unusual activity or policy violations., • Conduct periodic risk assessments of applications and systems., • Create and maintain application security policies, procedures, and standards., • Ensure alignment with corporate IT governance and compliance frameworks.Qualifications:, • Bachelor’s degree in Information Technology, Cybersecurity, or related field—or equivalent experience., • 5+ years of experience in application security, cybersecurity, IAM, and/or network security., • Hands-on experience with identity/access management tools, • Strong understanding of SOX compliance and segregation of duties, • Excellent analytical, troubleshooting, and communication skills.Preferred Certifications:, • CISSP, • CCNP, • CRISC

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description What to expect as a Commercial Security Senior Service Technician: The Senior Service Technician will be responsible for service, maintenance, repairs, and troubleshooting/diagnostics on access control equipment and IP-based video systems, including but not limited to: electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems, and intercom systems. As a Security Senior Service Technician, this person is expected to be a highly proactive and skilled individual and, at all times, maintain performance consistent with Allied Universal Technology Services' core values. • Travel to commercial client sites to service, repair, troubleshoot, and detect access control equipment and IP-based video security systems. including, but not limited to:, • (Electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems and intercom systems), • Troubleshoot system installations in a such a manner as to identify issues and apply the most effective and efficient resolution consistent with company installation standards; identify and repair physical security systems as required to ensure operability and compliance with any applicable building code, • Apply all necessary documentation for tracking of service-related issues, • Demonstrate knowledge and skill in the safe use of hand and power tools, analog/digital test equipment and CCTV testing devices, • Demonstrate proficiency in reading and understanding electrical schematics, CAD drawings and related documents for their use in low-voltage applications, • Establish and maintain effective working relationships with both internal and external customers, • Provide phone and on-line remote diagnostic support, • Drive to commercial client sites, with a company-issued vehicle to perform service, • High School Degree, Vocational School or equivalent required, • 5+ years of field experience, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possession of state-specific licensing (i.e. Class D or Alarm Installer, etc.) or ability to hold license once hired, • Understanding of Windows operating systems and overall IT network topology, • Highly proactive and skilled individual, and at all times maintain performance consistent with Allied Universal Technology Services (AUTS) core values, • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal & external customers, • Available for scheduled “on-call" duties to respond to emergency service calls, • Strong troubleshooting skills, mechanical and electronic aptitude, • Capable of lifting up to 50lbs and work on ladder heights of up to 16', • Be able to work independently or as a member of a team, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1460457

Build your best future with the Johnson Controls team: As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer * Competitive salary * Paid vacation/holidays/sick-time- 15 days of vacation first year plus 5 days sick time and 3 flex holidays * Comprehensive benefits package including 401K, medical, dental, and vision care – Available day one * Encouraging and collaborative team environment * Dedication to safety through our Zero Harm policy * Check us out!: ___ What will you do The Fire Sprinkler Service Supervisor is responsible for the proper coordination, execution, and follow-up of service jobs. Supervise and Schedule Day to day activities of technicians working with the Scheduler. Responsible for managing service operations and programs designed to meet Branches objectives in the areas of revenue, sales, margin, implement action plans, train and mentor technicians to meet Branches objectives. How you will do it * Revenue responsibility- Including implementing plans, programs and processes designed to meet and exceed corporate goals and objectives as well as maximizing market potential of the service business including new bookings (sales), revenue and profitability. * Customer Satisfaction: Responsible for maintaining effective customer communications along with building solid customer relationships from initial contact through order acquisition, delivery, installation and service. Ensure contractual obligations are fulfilled while quickly resolving customer complaints concerning service and collection issues thereby minimizing customer concerns and enhancing customer relations. * Productivity Improvement: Responsible for setting fair and manageable territories for technicians. Ensure that fair and effective performance measurements are assigned and that employees are motivated to achieve and/or exceed their assigned goals and objectives utilizing management tools and practices. Also responsible to be proficient at, perform as required and instruct/train all new and existing clerical and dispatch personnel in all specific job procedures including our CRM system. * Safety Compliance: Ensure that all employees comply with corporate safety programs. Responsible to ensure that employee safety training id through, complete and up to date. Identify safety issues and hazards and notify corporate safety office of those conditions that require corrective action. What we look for Required * Candidate must have understanding and knowledge of different types of applications of water-based fire protections systems. (Wet systems, Dry systems, Pre-Action systems, Foam systems, and Fire Pumps) * Demonstrate supervisory/leadership abilities to include training, team building, presentation and negotiation skills, district administration and effective interaction with customers. * Associate degree or equivalent experience. * Minimum of 5-10 years’ experience in a supervisory position. * Available for local/regional travel, which may include nights and weekends to accommodate customer's schedule. Preferred * BA Degree * NICET Level II in Inspection, Testing of Water Based Fire Protection Systems HIRING SALARY RANGE: $82-104k (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This role offers a competitive Bonus plan that will take into account individual, group, and corporate performance. This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ #TechHiring

As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Join the Johnson Controls family and thrive in a culture that values your voice and ideas. Your next incredible opportunity is just a few clicks away! Here's what we have to offer: • Competitive pay., • Paid vacation, holidays, and sick time - 10 days of vacation for the first year (plus sick time)., • Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one., • Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources., • Encouraging and collaborative team environment., • Dedication to safety through our Zero Harm policy., • Scheduling and management support., • JCI Employee discount programs (The Loop by Perk Spot). What you will do Asthe leader in the fire protection and security industry, we've been keeping buildings safe for decades. But we're always looking for ways to do more. And as we look to make our systems and technologies even smarter and more connected, it's vital that we have talented Installation and Service Technicians on hand to make sure our solutions are always at their best. This is your opportunity to contribute to the world around you, to add real value to our customers, and to help us deliver solutions that will have a lasting impact. Our extensive training program includes on the job training online courses and instructor led certification courses by manufacturer. How you will do it • This skilled position involves troubling shooting and repairing installed systems. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing., • Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks., • Candidate must possess excellent written/verbal communication and outstanding customer service skills., • Position involves the programming of fire alarm, security, and access control system panels., • Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner., • CCNA, A+ and Network+ certifications a plus., • On-call and after-hours work required as the customer needs. What we look for Required • High school diploma or equivalent required., • 5+ years’ experience with fire alarm, access control, security intrusion, sound, and communications systems., • Fire Alarm License is required., • Programming experience for any proprietary systems is required., • Must be able to interpret blueprints, diagrams, and specifications., • A good working knowledge of computers is necessary., • Ability to follow verbal and written instructions., • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc., • Ability to work flexible hours including weekends to meet customer requirements., • Overnight travel may be required., • On-call is required and mandatory., • Demonstrate a high level of customer service., • Maintain truck inventory to ensure timely response to customer needs., • Ability to adhere to, implement, and always follow safety guidelines and procedures., • Strong organizational skills, positive attitude, and ability to learn quickly., • Possess a valid driver’s license and driving record that meets company requirements., • Retain any licenses that are required by National, State and Local codes. Preferred • Technical training preferred., • NICET II preferred or ability to acquire within the first year. HIRING HOURLY RANGE: $24.52 - $31.25 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide. #LI-Onsite #TechHiring

We are searching for a Registered Pharmacy Technician -- someone who works well in a fast-paced setting. In this position, you will assist the pharmacist in the preparation related to the repackaging and compounding, filling, and delivery of medications, and other tasks associated with dispensing in a manner developmentally appropriate for the ages of patients served (0-adult). This role also assists in the procurement, record keeping, storage, and distribution of all controlled substances. Think you've got what it takes? Responsibilities: • Processes prescriptions/medication orders and prepares medication, • Ensures proper distribution/delivery of pharmaceutical and supply shipments, • Ensures the doses are delivered within established departmental time-frame standards, • Completes and documents daily and monthly activity checklists including expired drug checking, cleaning assignments, and ordering supplies and forms, • Checks all available means of communication including e-mail, and mailbox every shift, • Completes all daily filing, including medication orders and stop orders, • Works with Materials and Logistics to maintain adequate stock of medications and supplies, • Assists in the implementation of new formulations for manufactured products, new repackaged products, or any product deletions including updating the Master Formulation Book in the pharmacy areas, distributing, or pulling stock, and maintaining the M&R computer program Qualifications: • RPHT-TX - Registered Pharmacy Technician from the State Board of Pharmacy required, OR, • PHAR INT - Pharmacy Intern, • CPHT certification from the Pharmacy Technician Certification Board preferred, • 2 years pharmacy technician experience preferred, • 40 hours of training in compounding sterile products accredited by the Accreditation Council for Pharmacy Education or the American Society of Health-System Pharmacists preferred ABOUT US Since 1954, Texas Children's has been leading the charge in patient care, education and research to accelerate health care for children and women around the world. When you love what you do, it truly shows in the smiles of our patient families, employees and our numerous accolades such as being consistently ranked as the best children's hospital in Texas, and among the top in the nation by U.S. News & World Report as well as recognition from Houston Business Journal as one of this city's Best Places to Work for ten consecutive years. Texas Children's comprehensive health care network includes our primary hospital in the Texas Medical Center with expertise in over 40 pediatric subspecialties; the Jan and Dan Duncan Neurological Research Institute (NRI); the Feigin Tower for pediatric research; Texas Children's Pavilion for Women, a comprehensive obstetrics/gynecology facility focusing on high-risk births; Texas Children's Hospital West Campus, a community hospital in suburban West Houston; Texas Children's Hospital The Woodlands, the first hospital devoted to children's care for communities north of Houston; and Texas Children's Hospital North Austin, the new state-of-the-art facility providing world-class pediatric and maternal care to Austin and Central Texas families. We have also created Texas Children's Health Plan, the nation's first HMO focused on children; Texas Children's Pediatrics, the largest pediatric primary care network in the country; Texas Children's Urgent Care clinics that specialize in after-hours care tailored specifically for children; and a global health program that is channeling care to children and women all over the world. Texas Children's Hospital is affiliated with Baylor College of Medicine, one of the largest, most diverse and successful pediatric programs in the nation. To join our community of 15,000+ dedicated team members, visit texaschildrenspeople.org for career opportunities. Texas Children's is proud to be an equal opportunity employer. All applicants and employees are considered and evaluated for positions at Texas Children's without regard to mental or physical disability, race, color, religion, gender, national origin, age, genetic information, military or veteran status, sexual orientation, gender identity, marital status or any other protected Federal, State/Province or Local status unrelated to the performance of the work involved.

We are searching for clinical pharmacy specialists. In the clinical specialist position, you will manage and promote activities appropriate to ensure the medication use process, to serve as mentor to pharmacists who provide services to the medical specialty, and to assist in direct patient care activities to promote optimal drug therapy and resolve medication use problems in a manner developmentally appropriate for the ages of patients served. Job Duties & Responsibilities Responsibility A: Utilizes practice knowledge and skills to serve as Clinical Practitioner. • Actively participates in multi-disciplinary rounds with medical specialty services., • Identifies patients with special medication needs and oversees coordination of activities to ensure proper delivery of drug therapy, including patients requiring extracorporeal therapies., • Serves as member of patient care committees for medical specialty service. Makes recommendations and implements change to improve patient care, • Performs outcome-directed therapeutic drug monitoring for patients according to guidelines., • Monitors therapies for drug-drug, drug-nutrient, and drug-laboratory interactions and discusses interactions with appropriate health care professionals to help ensure patient safety and compliance., • Performs outcome-directed pharmacokinetics monitoring for patients according to guidelines and discusses recommendations with appropriate medical professionals to help provide the best care for the patient., • Creates and maintains appropriate and useful policies and procedures affecting areas of responsibility. Makes recommendations as to how services, methods, and procedures can be improved. Establishes action plans to implement appropriate changes., • Promotes the use of the formulary and follows procedures to obtain non-formulary medications., • Identifies opportunities for improvement for area of practice; seeks to accomplish these improvements., • Identifies and suggests agents to be added, deleted, or modified to/within the formulary and database., • Participates in the education and training of pharmacy employees, pharmacy students, pharmacy residents, and non-pharmacy personnel. Develops an educational program and a plan and incorporates into pharmacist's routine increasing their clinical knowledge., • Provides correct and timely drug information to medical, nursing, and pharmacy staff as needed., • Perpetuates self-development through publications and/or presentations at a professional society level each year., • Demonstrates current professional, managerial, and technical knowledge and skills., • Coordinates performance improvement or quality improvement activities to contribute to improved patient outcomes., • Develops educational programs, both practice-area specific and general education for pharmacists to ensure good patient care., • Serves as a preceptor to pharmacists, pharmacy residents and students., • Actively participates in the development of evidence-based clinical guidelines group to ensure appropriate provision of medical therapy in TCH guidelines., • Attends one pharmacy or service based professional meeting each year., • Collaborates effectively with other members of health care disciplines to provide comprehensive care to patients., • Communicates positively and appropriately to work effectively as a team., • Utilizes appropriate skills to help develop a care plan., • Checks all available means of communication including e-mail, mailbox, and voice mail if applicable every day/shift. Responds to pages and messages within departmental standards., • Communicates and treats all coworkers with respect and courtesy, avoiding loud and disruptive conversation, and/or actions and remarks indicating disrespect., • Keeps immediate supervisor informed of issues., • Maintain patient confidentiality as documented by lack of complaints and peer review., • Performs additional duties as assigned within specified deadline., • Ensures a work environment that is clean, neat, and organized according to departmental standards., • Completes mandatory health, safety, and training/in-services requirements by deadline., • Demonstrates initiative when opportunities are presented as evidenced by successful completion of projects., • Knowledge and Skills, • Technical and extensive knowledge of medication, pediatrics, and clinical therapeutics., • Knowledge regarding effectively communicating medications' effects, education about medications, and establishing programs specific to patient care and training is required., • Maintaining validation of departmental and area specific competencies., • Must be able to work under pressure and work closely with others continuously throughout the day. Requirements • Required Doctor of Pharmacy (Pharm.D.) or Bachelor's Degree Science in Pharmacy, • Required Licensed Pharmacist by the State of Texas or eligible for licensure in Texas., • Required PGY1 ASHP-accredited Pharmacy Practice Residency AND a PGY2 Pharmacy Practice Residency in an Advanced Area of Pharmacy Practice (PGY2 Critical Care, PGY2 Pediatrics preferred), or, • Required PGY1 ASHP-accredited Pharmacy Practice Residency with four (4) years' experience in an inpatient hospital pharmacy setting with clinical responsibilities, pediatric experience preferred. ABOUT US Since 1954, Texas Children's has been leading the charge in patient care, education and research to accelerate health care for children and women around the world. When you love what you do, it truly shows in the smiles of our patient families, employees and our numerous accolades such as being consistently ranked as the best children's hospital in Texas, and among the top in the nation by U.S. News & World Report as well as recognition from Houston Business Journal as one of this city's Best Places to Work for ten consecutive years. Texas Children's comprehensive health care network includes our primary hospital in the Texas Medical Center with expertise in over 40 pediatric subspecialties; the Jan and Dan Duncan Neurological Research Institute (NRI); the Feigin Tower for pediatric research; Texas Children's Pavilion for Women, a comprehensive obstetrics/gynecology facility focusing on high-risk births; Texas Children's Hospital West Campus, a community hospital in suburban West Houston; Texas Children's Hospital The Woodlands, the first hospital devoted to children's care for communities north of Houston; and Texas Children's Hospital North Austin, the new state-of-the-art facility providing world-class pediatric and maternal care to Austin and Central Texas families. We have also created Texas Children's Health Plan, the nation's first HMO focused on children; Texas Children's Pediatrics, the largest pediatric primary care network in the country; Texas Children's Urgent Care clinics that specialize in after-hours care tailored specifically for children; and a global health program that is channeling care to children and women all over the world. Texas Children's Hospital is affiliated with Baylor College of Medicine, one of the largest, most diverse and successful pediatric programs in the nation. To join our community of 15,000+ dedicated team members, visit texaschildrenspeople.org for career opportunities. Texas Children's is proud to be an equal opportunity employer. All applicants and employees are considered and evaluated for positions at Texas Children's without regard to mental or physical disability, race, color, religion, gender, national origin, age, genetic information, military or veteran status, sexual orientation, gender identity, marital status or any other protected Federal, State/Province or Local status unrelated to the performance of the work involved.

Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! Summary: The Pump Mechanic will repair/fabricate a variety of centrifugal, gear, diaphragm, and reciprocating pumps, gear reducers and related rotating equipment, troubleshoot, disassemble, inspect and repair a variety of rotating equipment including centrifugal pumps (both single and multi-stage), gear pumps, reciprocating pumps and metering pumps, gear reducers, blowers (both vacuum and pressure), mechanical seals, and many other types of equipment. Currently seeking an ANSI Pump Mechanic to join our Deer Park, Pasadena, TX location Responsibilities of the ANSI Pump Mechanic include, but are not limited to: • Receive, disassemble, inspect, repair, fabricate, paint, package/prep API centrifugal pumps as well as other related rotating equipment, • Safely load, unload, and move equipment as needed #LI-CB1 #zrcb Qualifications of the ANSI Pump Mechanic include, but are not limited to: • 5 years of experience working in a pump repair facility with previous experience repairing API centrifugal pumps and other related rotating equipment, • Experience repairing IPM pumps, creating details, and making technical decisions, • In-depth understanding of API 610, and other applicable standards, • Ability to read pump sectional, machine drawings, and OEM pump manuals, • Disassembly, inspection, ability to write up a detailed rotating equipment report to all necessary repairs and or replacement parts needed, Ex: assembly prep, assembly, pneumatic pressure testing of assembled equipment, painting of finished repair and final inspection, • Safely use hand, power, pneumatic and hydraulic tools, • Experience with pneumatic and hydrostatic testing of parts and equipment, • Ability to read and understand mechanical seal drawings, mechanical seal removal, installation, and pneumatic pressure testing preferred, • Ability to work with multiple and competing priorities in a fast-paced environment, • Ability to achieve results with minimal supervision Physical Demand: Ability to lift up to 50 lbs. Working Conditions: Must be able to work in a shop environment without AC and heat, with possible exposure to dirt, heat, and noise. Training/Certifications: N/A Shift Time/Overtime: 6:00 am to 4:30 pm CDT, must be able to work OT hours as required. Education: High School Diploma or GED Education: High School Diploma or GE Location: USA:TX:Pasadena DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package for full-time regular employees, normally working a minimum of 30 hours per week including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. All part-time and temporary employees are eligible for 401(k). Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job DescriptionWay Mechanical is one of the nation’s largest and most experienced mechanical contractors. We specialize in commercial air conditioning, plumbing, piping, and the maintenance of these systems. Way Mechanical is at the forefront of design build/design assist, pre-construction, commissioning, building information modeling, and quality control. We are currently seeking a Service HVAC Technician to join our team! Responsibilities: • Perform Preventative Maintenance, troubleshooting and repairs of Commercial HVAC equipment, • Ability to troubleshoot commercial equipment, • Diagnoses HVAC, performance through observation, refrigeration, testing and setup, • Able to read and comprehend wiring diagrams, installation/operation service manuals, • Provide timely documentation using Company Service software on Company iPad, • Provide effective communication to Customers and to Office to ensure Customer Satisfaction, • Demonstrate accountability for assigned work, to include managing time and follow-ups, • Follow Safety Protocols Qualifications:, • 3-5+ Years Commercial HVAC Experience, • Ability to follow a scope, • Must be able to pass a drug screen, • Must have a valid driver’s license and good driving record, • MUST have an EPA license, • Ability to understand use of gauges meters, measuring instruments, and hand/power tools, • Able to explain work performed to management and customers, • This position requires driving on company time for company-related tasks. All candidates are subject to a driving background check prior to hire Perks of the Trade:, • Medical, Dental, and Vision, • Referral Bonuses, • Weekly Pay, • Profit Sharing Program, • 401k, • Company Vehicle, • Company Fuel Card, • Company Phone, • Company iPad, • Paid Vacation, • 7 Paid Holidays, • Years of Service Appreciation Program

Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! Summary: The Pump Mechanic will repair/fabricate a variety of centrifugal, gear, diaphragm, and reciprocating pumps, gear reducers and related rotating equipment, troubleshoot, disassemble, inspect and repair a variety of rotating equipment including centrifugal pumps (both single and multi-stage), gear pumps, reciprocating pumps and metering pumps, gear reducers, blowers (both vacuum and pressure), mechanical seals, and many other types of equipment. Currently seeking an API Pump Mechanic to join our Deer Park, Pasadena, TX location. Responsibilities of the API Pump Mechanic include, but are not limited to: • Receive, disassemble, inspect, repair, fabricate, paint, package/prep API centrifugal pumps as well as other related rotating equipment, • Safely load, unload, and move equipment as needed #LI-CB1 #zrcb Qualifications of the API Pump Mechanic include, but are not limited to: • 5 years of experience working in a pump repair facility, • Experience repairing IPM pumps, creating details, and making technical decisions, • In-depth understanding of API 610, and other applicable standards, • Ability to read pump sectional, machine drawings, and OEM pump manuals, • Disassembly, inspection, ability to write up a detailed rotating equipment report to all necessary repairs and or replacement parts needed, Ex: assembly prep, assembly, pneumatic pressure testing of assembled equipment, painting of finished repair and final inspection, • Safely use hand, power, pneumatic and hydraulic tools, • Experience with pneumatic and hydrostatic testing of parts and equipment, • Ability to read and understand mechanical seal drawings, mechanical seal removal, installation, and pneumatic pressure testing preferred, • Ability to work with multiple and competing priorities in a fast-paced environment, • Ability to achieve results with minimal supervision Physical Demand: Ability to lift up to 50 lbs. Working Conditions: Must be able to work in a shop environment without AC and heat, with possible exposure to dirt, heat, and noise. Training/Certifications: N/A Shift Time/Overtime: 6:00 am to 4:30 pm CDT, must be able to work OT hours as required. Education: High School Diploma or GED Location: USA:TX:Pasadena DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package for full-time regular employees, normally working a minimum of 30 hours per week including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. All part-time and temporary employees are eligible for 401(k). Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job DescriptionWho is Flock? Flock Safety is the leading safety technology platform, helping communities thrive by taking a proactive approach to crime prevention and security. Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public-private safety network. Trusted by over 5,000 communities, 4,500 law enforcement agencies, and 1,000 businesses, Flock delivers real-time intelligence while prioritizing privacy and responsible innovation. We’re a high-performance, low-ego team driven by urgency, collaboration, and bold thinking. Working at Flock means tackling big challenges, moving fast, and continuously improving. It’s intense but deeply rewarding for those who want to make an impact. With nearly $700M in venture funding and a $7.5B valuation, we’re scaling intentionally and seeking top talent to help build the impossible. If you value teamwork, ownership, and solving tough problems, Flock could be the place for you. Pay: $75,000-$111,000/year + overtime eligible + stock options + benefits Travel: 50% The Opportunity Flock Safety is looking for a Journeyman Electrician to join our Field Operations team. You’ll be installing and maintaining electrical systems that power Flock’s safety technology—cameras, radar, and other equipment. This is a hands-on role for someone who takes pride in doing quality work, follows safety standards, and is comfortable on the road. What You’ll Do: * Install and troubleshoot wiring, switches, breakers, panels, and other electrical components * Use electrical testing tools (multimeters, voltage testers, etc.) * Work safely, following NEC codes and OSHA guidelines * Perform installs using ladders or bucket trucks (up to 30’ high) * Meet with customers on-site and document work in our field app * Travel frequently (up to 90%), often a couple weeks at a time * Occasionally dig and set poles for equipment installs The Skillset * Valid Journeyman Electrician license in Texas (4+ years of experience) * Solid knowledge of NEC codes and electrical troubleshooting * Ability to read blueprints/schematics and use testing equipment * Physically able to lift 75 lbs, climb ladders, and work outdoors * Comfortable with basic computer systems * Must possess a valid, unrestricted driver’s license and maintain a driving record that meets company motor vehicle standards. The Perks ????Flexible PTO: We seriously mean it, plus 11 company holidays. ⚕️Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. Tools & Gear: Flock Safety-branded uniforms, tools, and safety gear as well as an annual $250 uniform expense allowance ????Work Vehicle: The use of a well-equipped Flock Safety owned Sprinter van and fully-paid-for gas card ????Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. ????Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. Flock will provide a $50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. ????Spring Health: Spring Health offers a variety of mental health benefits, including therapy, coaching, medication management, and digital tools, all tailored to each individual's needs. ????Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support ????Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. ????ERGs: We want all employees to thrive and feel like they belong at Flock. We offer three ERGs today - Women of Flock, Flock Proud, and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know. ????Productivity Stipend: $250 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. ????WFH Stipend: $150 per month to cover the costs of working from home. #ZR Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at . This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Flock Safety is aware of fraudulent individuals and agencies falsely claiming to represent our company. All legitimate communication from Flock Safety will come from an email address ending in @flocksafety.com. We do not make job offers through messaging apps, social platforms, or unauthorized third parties, and we will never request payment or sensitive personal information during the hiring process. If you encounter suspicious outreach related to a Flock Safety role, please report it to Compensation Range: $75K - $111K

Job Description Job Title: Pump Mechanic Job Description We are seeking a skilled pump mechanic to disassemble, assemble, service, and repair various types of pumps. Ideal candidates will have experience in pump manufacturing or servicing and will be adept at reading blueprints and drawings. The role involves some lifting, and you will have your own workstation while occasionally collaborating with others. Responsibilities • Assemble reciprocating pumps and systems., • Assemble centrifugal pumps and systems., • Perform liquid nitrogen testing and hydrostatic pressure testing., • Assemble expander packaged systems., • Repair centrifugal and piston pumps, as well as expanders., • Troubleshoot mechanical equipment and components., • Clean and assemble equipment to oxygen service standards., • Follow all relevant procedures and instructions., • Work independently and collaboratively in the workshop., • Understanding of rotating equipment., • Ability to read blueprints., • 3-5 years of experience with hydraulics., • Ability to use and read calipers and micrometers., • Experience in pump assembly. This role offers a contract-to-hire opportunity with comprehensive benefits and a 401k match up to 5% upon direct hire. The company boasts a stable work environment, having not experienced layoffs in the last 20 years. Work Environment Work in a clean, non-climate controlled shop during first shift hours, from 7:00am to 4:30pm, Monday through Friday. Overtime opportunities are available. Job Type & Location This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX. Application Deadline This position is anticipated to close on Dec 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Title: Lab Technician Location: Houston, TX Type: Contract Pay Rate: $25-$28/hour Shift: Rotating Schedule Overview: Specialty Chemical Company is seeking a Laboratory Technician to be a critical member of the Quality Control team to ensure the purity, safety, and quality of all materials processed by the company. The ideal candidate would have a foundational knowledge of chemistry and laboratory techniques, strong attention to detail and familiar with hazardous waste/chemical safety. Responsibilities: Sample Analysis & Testing Receive, log, and prepare diverse chemical samples, including raw materials, in-process streams (especially spent acid and regenerated acid), and final virgin acid products. Conduct routine quantitative and qualitative chemical and physical tests, such as titrations, density, specific gravity, pH measurement, and acid concentration analysis (wet chemistry). Operate, calibrate, and maintain analytical instruments (e.g., spectrophotometers, balances, conductivity meters) following established Standard Operating Procedures (SOPs). Perform trace impurity analysis to ensure high-purity grade acid meets demanding customer specifications (e.g., in the electronics and battery sectors). Quality Assurance & Compliance Compare test results against established product specifications to determine final product approval (approve, hold, or reject). Accurately record and document all test data, observations, and procedures in the Laboratory Information Management System (LIMS) and/or official lab records. Prepare and standardize chemical solutions, buffers, and reagents needed for daily analysis. Assist in maintaining documentation for compliance with ISO and/or other internal Quality Management Systems (QMS). Strictly adhere to all company, federal, and state safety regulations (OSHA, EPA) and Good Laboratory Practices (GLP), particularly when handling concentrated and spent sulfuric acid. Requirements: Minimum of an associate’s degree (A.A.S.) in Chemistry, Chemical Technology, Applied Science, or a closely related technical field, OR a minimum of 1 year of equivalent hands-on experience in a production or industrial lab environment. Solid foundation in basic chemical principles, laboratory math, and wet chemistry techniques. Proficiency with Microsoft Office Suite (especially Excel) for data entry and basic reporting. Ability to work a rotating shift schedule, which may include nights, weekends, or holidays, as dictated by 24/7 plant operations. Preferred Bachelor's Degree (B.S.) in Chemistry or Chemical Engineering. Experience with advanced analytical techniques such as ICP-OES or Atomic Absorption (AA). Familiarity with chemical process control, manufacturing quality control, or LIMS. Prior experience working with corrosive and hazardous materials (acids, bases). System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M-3 Ref: #558-Scientific

Job Description Position Title: Vehicle Mechanic- Diesel Join our team of heroes! Are you looking for more than a job? We are hiring results-oriented Vehicle Mechanics to join our team. The Vehicle Mechanic performs preventive maintenance and minor repairs to Gulf Coast Blood vehicles. This role is influential to the organization’s ability to host blood drives and ensure hospitals receive necessary blood products to save lives. This role is great for those who enjoy using their talents to add value to critical operations. JUST FOR YOU: • Monday to Friday, 12 PM to 8 PM Schedule with Rotating on-call availability., • Career advancement opportunities., • Competitive compensation and benefits package., • Texas Medical Center location with free parking., • Engaging and exciting opportunity to SAVE LIVES. Tips to thrive in our culture: • Embody our Core Values of Commitment, Integrity, and Respect, • Work to actively create experiences that inspire others to save lives, each and every day., • Embrace doing it right, making connections, and creating desired experiences., • Comply with all organizational policies and standards, including safety rules, and be willing to report actual and potential violations to the appropriate supervisor or manager. In this role, you’ll: • Perform preventive maintenance such as changing fluids and filters, brake rebuilding, tune-ups transmission service, tire rotation; perform repairs on vehicles such as electrical, brakes, cooling system, transmission, air conditioning, minor vehicle equipment repairs, etc., • Identify reported vehicle problems., • Inspect vehicles on a routine basis., • Account for tools and supplies, making purchases as instructed., • Log vehicle mileage and check fuel levels., • Maintain Vehicle Maintenance area and assist with special projects and reports upon request. Who We Are: Since 1975, Gulf Coast Blood has been one of the nation’s largest community blood centers, serving 170 hospitals across 26 counties. Headquartered in Houston, we support the world’s largest medical complex—the Texas Medical Center—while operating 18 donor centers and hosting more than 7,000 mobile blood drives each year. As an FDA-accredited nonprofit, we provide high-quality human cellular material for both scientific and therapeutic use. Some Jobs Change Lives. Others Save Them. Think you have what it takes to save lives with us? We want to hear from you. EQUAL OPPORTUNITY EMPLOYER STATEMENT Gulf Coast Blood is an Equal Employment Opportunity Employer. Qualified applicants for positions are considered without regard to race/ethnicity, color, religion, national origin, age, pregnancy, sex, sexual orientation, gender identity, transgender status, military status, protected veteran status, disability status, genetic testing results, or any other basis or characteristic prohibited by applicable law, statute, regulation or Executive Order.

Job DescriptionDescription: VETERANS ARE ENCOURAGED TO APPLY Lonestar Integrated Solutions is a dynamic and rapidly growing organization in the field of electrical solutions. We are currently seeking an experienced and motivated Electrical Technician to join our team. This is an excellent opportunity to be part of an exciting new venture from the ground level, where your skills and expertise will contribute to the success and growth of the company. Responsibilities: • Install, maintain, and repair electrical and electronic systems and equipment following industry best practices and in compliance with the National Electric Code (NEC)., • Perform routine inspections, diagnostics, and troubleshooting to identify electrical issues and implement appropriate solutions., • Use electrical hand and power tools, as well as testing equipment to complete installations, repairs, and upgrades efficiently and safely., • Collaborate with team members and project managers to ensure projects are completed on time and within specifications., • Maintain accurate records of work performed, including repairs, modifications, and upgrades made to electrical systems., • Read and interpret engineering schematics to build wire control panels in accordance with ul508 standards, industry best practices and other specifications as required., • High school diploma or GED equivalent., • Minimum 5 years of experience as an Electrical Technician, or comparable role, preferably in a similar industry., • Strong knowledge of the National Electric Code (NEC) and ability to apply industry best practices., • Proficiency in using electrical hand tools, power tools, and testing equipment., • Excellent troubleshooting and problem-solving skills to identify and resolve electrical issues efficiently., • Ability to read and interpret electrical schematics, blueprints, and technical manuals., • Effective communication skills and the ability to work well within a team., • May be required to move up to 40 lbs., • Regularly works around moving mechanical parts and in warehouse conditions that are not always climate controlled and may include, heat and humidity., • Noise level may be loud at times., • Medical, dental, life and vision insurance, • 401(k) Retirement Plan and Match, • Paid Time Off This job description is a general outline of the day-to-day duties to be expected and may not cover all job responsibilities that may be assigned by management. Requirements:

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for a Senior Propulsion Engineer to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Reports NASA JSC EP4 Branch, • Extensive knowledge in component and system certification and the impacts of component design and operating environment on certification, • Provides support to national and international customers for Gateway and International Space, visiting vehicles, and Commercial Crew customers, • Extensive knowledge in the design and development of major elements of ground test and space flight systems required to demonstrate the utilization of propulsion and fluid systems, • Writes technical and progress reports covering assigned tasks which are made available to other technical groups and agencies, • Resolves unique or novel problems, conditions, and issues as related to Propulsion Subsystems, • Provide support for flight Anomaly Resolution review and In-Flight Investigation review, capable of solving propulsion questions with low levels of information This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a minimum of a bachelor's degree in Engineering and normally possess 5-10 years of related experience. License and certification may be required., • Spacecraft propulsion experience with a focus on fluid and mechanical aspects, • Experience in the design, assembly, testing, certification, and operation of space propulsion systems and components - Experience coordinating space propulsion systems requirements verification and validation between multiple organizations, • Basic knowledge of commonly used concepts, practices, and procedures in the field, such as mechanical system design, engineering drawings and sketches, material selection, testing, and office software, • Excellent organizational skills, oral and written communication skills, and the ability to coordinate support from a wide range of technical disciplines, • Confident in knowledge and experience, and able to discuss propulsion topics with subject matter experts Preferred Qualifications: • Requires a minimum of a bachelor's degree in engineering and may be expected to have a related master's degree and possess 2 plus years of related experience, • Familiar with JSC organizations, processes, and procedures, • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job DescriptionDescription: We are hiring a highly skilled and compassionate Nurse Practitioner with a passion for providing exceptional care to patients undergoing lung transplantation? Look no further! We are seeking a dedicated and experienced Medical Lung Transplant Nurse Practitioner/Physician Assistant to join our dynamic team in Houston Texas! This provider will play a vital role in the care and management of patients before, during, and after lung transplantation. You will work closely with our multidisciplinary team, including transplant surgeons, pulmonologists, and other healthcare professionals, to ensure optimal patient outcomes throughout the entire transplantation process including but not limited to Conducting comprehensive pre-transplant evaluations, including medical history review, physical assessments, and diagnostic testing. Collaborating with the transplant team to determine patient eligibility for lung transplantation. Assist in the coordination and execution of the lung transplant process, including patient education, evaluation of potential donors, and post-operative care. Provide specialized nursing care to patients undergoing lung transplantation, including monitoring vital signs, administering medications, and managing post-operative complications. This is a nonsurgical medical position within the Lung Transplant Team** Qualifications: • Active NP or PA Certification in Good Standing., • Minimum of 2 years of experience in a critical care or transplant setting, preferably with exposure to lung transplantation. Offered: Competitive Compensation, Fantastic Benefits, PTO, Company Retirement + Match, CMEs, Direct Training with Physicians and PA Manager. If you are a highly skilled and experienced Lung Transplant PA-C/NP-C looking for a challenging and rewarding opportunity, we invite you to apply for this position today. Join our team and help us provide exceptional care to patients in need of lung transplantation. Apply today with your most up to date CV for immediate consideration and don't miss this fantastic opportunity!

Job Description Key Responsibilities IT BA experience in trading (Front/Middle Office), Exchange-traded derivatives & trade lifecycle, Commodity trading – Oil & Gas, Regulatory knowledge (MiFID II, EMIR, FCA), Market data systems (Bloomberg, Refinitiv, TradingScreen), FIX engineering, Scripting (Python, PowerShell, C#, SQL), Messaging systems & network protocols Top 5 Responsibilities / Capabilities: • Analytical and detail-oriented thinker, • Builds strong relationships with traders and business stakeholders, • Works collaboratively with global teams; approachable and team-focused, • Proactively identifies areas for improvement and drives change, • Strong understanding of commodity trading (oil & gas), particularly front-office environments, • Ability to analyze application functionality and propose enhancements with a product mindset, • Experience writing Agile stories, epics, and acceptance criteria, and performing regression/functional testing, • Background working in fast-paced, complex trading systems with end-to-end visibility, • Confidence collaborating with developers, UI teams, and trading desks ** Our Company offers a very competitive benefits program including paid time off, medical, dental, vision, and a 401K. Company DescriptionFounded in 2015 and backed by two decades of hands-on experience, our strong insight on the enterprise ecosystem and its dynamics helps to offer a complete end-to-end solution. We automate recruitment processes with intelligent solutions to save time and money. Synkriom leads the industry with experience authentication of candidates.Founded in 2015 and backed by two decades of hands-on experience, our strong insight on the enterprise ecosystem and its dynamics helps to offer a complete end-to-end solution. We automate recruitment processes with intelligent solutions to save time and money. Synkriom leads the industry with experience authentication of candidates.

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for a Senior Aerospace Textile Engineer to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Support various NASA programs by providing non-metallic and fibrous materials expertise for the selection of soft goods exposed to different atmospheres, high vacuum, and extreme temperatures. This support applies to any type of soft goods: semi-rigid plastics, films, textiles, nonwovens, and their finishing treatments., • Provide technical leadership on development of non-metallic material and fibrous materials (i.e. films, textiles, nonwovens) to use in Government Furnished Equipment (GFE) development for various NASA programs, this includes space suit materials, spacecraft interior hardware, inflatable structure, as well as hygiene and sanitation for lunar and Martian environments., • Serve as a subject matter expert in textile materials, guiding the design, development, and qualification of advanced softgoods for next-generation lunar and Martian space suits., • Provide technical support related to non-metallic and fibrous materials for R&D activities under the Small Business Innovation Research (SBIR) and the Small Business Technology Transfer (STTR) NASA programs., • Review NASA reports, requirement documents, proposals, conference papers, journal articles related to non-metallic and fibrous materials., • Support NASA Materials and Processes (M&P) engineers with respect to the evaluation and selection of non-metallic and fibrous materials., • Perform testing and characterization on non-metallic materials as needed. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a minimum of a bachelor's degree in Engineering and may be expected to have a related master's degree and normally possess 10-15 years of related experience., • BS or higher education in Textile Engineering, Fiber Science, Material Science and Engineering, or related field., • Minimum of 10 years of direct experience in textile manufacturing industry., • Strong understanding of textiles and the textile manufacturing industry - from fiber and yarn formation to fabric construction, coating, lamination, and finishing., • Proven experience in textile product development and scale-up from prototype to production., • Solid knowledge of fiber properties, textile structures (woven, knit, nonwoven), and their associated manufacturing methods., • Hands-on experience with textile testing and performance evaluation per ASTM, AATCC, ISO, or equivalent standards., • Ability to analyze test data and translate performance requirements into material design improvements and process adjustments., • Demonstrated ability to work both independently and collaboratively across multidisciplinary teams, including materials, systems, and mechanical engineers., • Strong problem-solving, organization, and multitasking skills within a fast-paced environment., • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job DescriptionAbout Tevpro At Tevpro, we don’t just write code — we deploy elite, mission-first software developers with a Navy SEAL mindset to solve your toughest financial and technology challenges. From legacy system modernization to custom application development or integrating complex APIs, our team specializes in building adaptable, high-performance software tailored to your exact business needs. The Role We’re looking for a QA Automation Engineer who thrives in complex environments and has the technical chops to ensure quality at scale. This isn’t a “check-the-box” testing role—this is about building automation frameworks, breaking things in smart ways, and guaranteeing excellence before products reach the client. The ideal candidate has a consulting or start-up background, knows how to work independently with minimal direction, and has 5+ years of QA automation experience in fast-paced software environments. What You’ll Do • Design, develop, and maintain automated testing frameworks for web and API applications., • Write, execute, and refine automated test scripts to validate functionality, performance, and scalability., • Collaborate with product managers, engineers, and clients to ensure quality is baked into every step., • Identify bugs, track defects, and champion solutions with engineering teams., • Balance speed with precision—delivering thorough testing without slowing down delivery., • Act as the final gatekeeper of quality before products reach our clients.What We’re Looking For, • 5+ years of hands-on experience in QA automation (Selenium, Cypress, Playwright, or similar)., • Strong scripting skills (JavaScript, Python, Java, or similar)., • Deep understanding of CI/CD pipelines and how automated testing fits in., • Ability to create test strategies for complex, multi-system environments., • Experience in consulting or fast-moving start-up environments preferred., • Action-oriented mindset—you don’t just find problems, you help solve them., • Bonus points if you’ve worked with performance/load testing tools or have DevOps exposure.Why Join Tevpro?, • Be part of a high-performing consulting team solving big, complex problems., • Work with top engineers and product leaders where quality isn’t an afterthought—it’s the standard., • Autonomy, ownership, and impact on projects that matter., • Competitive salary + bonus, • Internal and external training, • PTO, • Matching 401k Houston, TX (hybrid work environment, in-office 1+ days per week required). We are unable to offer sponsorship. Candidates MUST be authorized to work for any employer in the USA. Powered by JazzHR jffqK35js0

Job Description RMS is seeking a skilled Lead Nondestructive Testing (NDT) Technician to perform inspections and evaluations that determine the acceptance or rejection of components in accordance with written procedures and industry standards. This role is responsible for setting up and calibrating NDT equipment, accurately interpreting and evaluating test results, and ensuring compliance with all applicable codes, standards, and specifications. With a thorough understanding of the capabilities and limitations of NDT methods, the Lead NDT Technician provides technical expertise on the shop floor while offering on-the-job training and guidance to Assistants and Level I Technicians to ensure safe, efficient, and high-quality inspection practices. SKILLS REQURIED ORGANIZATIONAL - Leadership & Organization: ● Organize and prioritize NDT work to align with production and shipping schedules ● Maintain accurate and thorough NDT records, including RMS and third-party documentation ensuring traceability and compliance ● Exceptional attention to details. ● Display ownership and accountability for tasks and responsibilities. ● Adaptable to changing schedules. INTERPERSONAL - Experience Required: ● Excellent interpersonal and customer service skills. ● Excellent verbal and written communication skills. ● Ability to work within a team. EFFICIENCY - Experience Preferred: ● Ability to manage other projects and responsibilities that may be added at the company’s discretion. ● Exceptional ability to multitask, prioritize, and manage time and resources effectively. ● Excellent time management skills with a proven ability to meet deadlines. PRIMARY ROLE RESPONSIBILITIES ● Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection. ● Establish techniques for proper examination of components or assemblies being inspected. ● Apply testing criteria in accordance with applicable specifications or standards and evaluate results. ● Generate and maintain nonconformance reports to ensure that all discrepant components and assemblies are evaluated in accordance with company requirements. ● Generate inspection/test reports and associated documentation. ● Instruct/ train others. General: ● The above list of activities is not all-inclusive but a general representation of the requirements of the RMS Lead NDT Technician. This above list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS ● Minimum of three years’ experience with Nondestructive testing ● NDT Level II Certification in Magnetic Particle and Liquid Penetrant testing ● MPI Bench experience preferred REQUIRED EDUCATION ● High School Diploma or GED from accredited institution ADDITIONAL REQUIREMENTS ● The position may be based in RMS’s Houston, TX facility.. ● Travel time is expected less than 15% ● This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs. ● This position can be required to participate in the company random or customer specific drug and alcohol screening and background check. ● Ability to act professionally under stressful situations. ● Able to understand, read, write and speak English. ● Ability and willingness to lift objects weighing up to 50 lbs.(with assistance), walk, climb, reach, kneel, crawl, and balance. ● Must be able to use hands for assembling and tool usage ● While performing the duties of this position the employee will be required to stand, sit, bend, and walk for significant portions of the shift ● Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steel. ● Authorized to work in the United States ● RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. WHAT WE OFFER: • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS: Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Are we the road to your future? We are currently searching for an experienced Junior Structural CAD Technician to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, a degree in Computer Aided Drafting or similar field and 3 years of prior experience with structural drafting. What you’ll be doing: • Provide assistance to engineers using OpenBridge Designer to create bridge detail plans and perform minor design work on bridge projects, • Contribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plans, • Prepare minor mathematical calculations and quantity calculations for roadway/bridge projects, • Work with engineers to develop 3D models using both Open Road Designer and Open Bridge Designer, • Research applicable design codes and guidelines to ensure design compliance, • Research design options and documents findings, • Coordinates assignments with project team and supervisor, • Perform quality control reviews of design plans and calculations, • Perform other duties as assigned by supervisor, • Be a team player and assist other groups as needed What you need to have: • Associate degree from a technical or four-year school, • 3-10 years of prior experience with structural and/or roadway drafting, • Degree in Computer Aided Drafting or similar field is preferred, • Familiar with TxDOT Bridge Detailing Manual and TxDOT Bridge Standards, • Experience in Open Road Designer is preferred, • Experience in Autodesk Civil 3D is a plus, • Excellent communication skills and ability to work within a team environment, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 TX

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for a Spaceflight Hardware Propulsion Refueling Lead to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Serve as the Chemical Propulsion Refueling Lead acting as the cross-project point of contact for the Gateway Integrated Refueling Circuit which implements the Refueling architecture., • Lead the Gateway Refueling Working Group, involving planning agenda topics related to current, and forward risks, issues, and challenges., • Develop a detailed understanding of the Gateway Refueling Requirements Document and apply working knowledge to lead domestic and international partners in technical discussions on requirement compliance., • Lead the development and implementation of the Gateway Refueling Concept of Operations., • Assist the System Manager in the development of Flight Rules and operational constraints related to Flight operations of the Gateway Station., • Communicate mission baseline, mission risk, and issues to mission management teams, across a variety of NASA and commercial partnership leadership., • Travel to commercial partners facilities, both domestic and international, for insight/oversight of critical operations and other mission essential technical meetings. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a minimum of a bachelor's degree in Engineering and normally possess 5-10 years of related experience., • Spacecraft propulsion experience with a focus on fluid and mechanical aspects, • Experience in the design, assembly, testing, certification, and operation of space propulsion systems and components, • Experience coordinating space propulsion systems requirements verification and validation between multiple organizations, • Basic knowledge of commonly used concepts, practices, and procedures in the field, such as mechanical system design, engineering drawings and sketches, material selection, testing, and office software, • Excellent organizational skills, oral and written communication skills, and the ability to coordinate support from a wide range of technical disciplines, • Confident in knowledge and experience, and able to discuss propulsion topics with subject matter experts, • Experience with NASA JSC Flight Hardware Life Cycle, Certification, and Engineering processes, • Knowledge and work experience in a Systems Engineering role in a NASA, DoD, or Aerospace environment, • Experience with requirements management, verification and validation definition and execution, design trades, risk analysis, and system analysis of space hardware, • Familiar with JSC organizations, processes, and procedures, • Experience with NASA JSC Flight Hardware Life Cycle, Certification, and Engineering processes, • Experience with requirements management, verification and validation definition and execution, design trades, risk analysis, and system analysis of space hardware, • Working knowledge of NASA, JSC, and ISS standard practices and requirements including safety, fault tolerance, and unique disciplines, • Familiarity with NASA/JSC documentation databases and share point sites as well as typical systems engineering software products, • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job DescriptionSynthesis HealthWho We Are We're a mission and values driven company with tremendous dedication to our customers. Our 100% remote team, spread across the US and Canada, is dedicated to a common goal – to revolutionize healthcare through innovation, collaboration, and commitment to our core values and behaviors. About the Opportunity The Senior Clinical Applications Specialist at Synthesis Health is a key member of the implementation team and operates at the intersection of clinical workflows, customer engagement, product development, and technical operations. This individual leads and supports end-to-end customer onboarding, from pre-sales product demonstrations through implementation, training, and post-go-live support. The role requires deep expertise in imaging workflows, including DICOM, RIS/PACS, structured reporting and clinical training. This position is responsible for delivering effective and personalized training to radiologists, technologists, and administrators—both remotely and onsite—while also configuring administrative and user preferences, mapping exams, and providing high-level technical support for software and hardware environments. Key Responsibilities:50%: Training, Onboarding & Customer Engagement • Conducts comprehensive training sessions—onsite and virtual—for radiologists, technologists, and administrative staff, tailored to their specific roles and workflows., • Leads the creation and delivery of role-specific training content to maximize adoption, increase user proficiency and drive clinical workflow optimization., • Configures and customizes administrative settings, including customer account preferences, user groups and workflow configurations to align with organizational goals., • Provides hands-on support during go-live events, ensuring smooth transitions, clinical readiness, and successful user adoption., • Acts as the primary point of contact for clinical users, providing prompt support and ensuring ongoing satisfaction with the system., • Partners with sales and product teams during pre-sales engagements to deliver impactful product demonstrations and address workflow-specific inquiries.20%: Data Management, Exam Mapping & Workflow Optimization, • Manages study compendium normalization, including regex-based exam name standardization and exam mapping across disparate systems., • Oversees DICOM data integrity and structured report parsing (DSR), ensuring accurate ingestion, classification, and accessibility of imaging studies., • Collaborates with internal teams to optimize data-driven workflows, facilitating seamless integration across clinical and technical systems., • Assists with ongoing system assessments to enhance reporting, image routing, and interoperability between Synthesis platforms and third-party systems.10%: Technical Support & Troubleshooting, • Provides advanced software and hardware support related to Synthesis clinical applications, including troubleshooting connectivity issues, DICOM configurations, and workstation setups., • Partners with engineering and QA to escalate and resolve system bugs, performance concerns, and workflow blockers., • Works closely with integration specialists to ensure technical implementations meet the required specifications and user expectations.10%: Cross-functional Collaboration, • Collaborates with product, engineering, and implementation teams to relay customer feedback and help shape future development., • Participates in testing, validation, and quality assurance processes for new features and updates., • Develops internal knowledge resources, standard operating procedures, and job aids to support customer-facing teams.5%: Process Improvement & Innovation, • Continuously evaluates training approaches, implementation strategies, and user feedback to identify areas for process improvement., • Other duties as assigned. Qualifications • 3+ years in a healthcare setting and/or working on clinical applications., • Experience with DICOM data workflows, structured reporting, and interoperability standards., • Strong understanding of radiology workflows, DICOM standards, and clinical data management., • Proficiency in developing regex rules and troubleshooting clinical software., • Excellent verbal and written communication skills, with the ability to deliver engaging training sessions., • Proven ability to manage multiple tasks and prioritize effectively in a dynamic environment., • Customer-focused mindset with a proactive approach to problem-solving.Preferred Qualifications, • ARRT certification., • 3+ years in radiology, sonography, or healthcare administration You will adhere to our company's values and behaviors and incorporate them in your interactions with colleagues and customers. Values: Other benefits include but not limited to: Medical, Dental, Vision, "Use as needed" vacation policy, and participation in our employee option program. Synthesis Health is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law.

Job Description Position: Field Supervisor Location: Houston, TX, US Salary Range: $28.00 - $35.00 Hourly About Us: We are a leader in petroleum and industrial facility inspection, maintenance, repair, and environmental services. We pride ourselves on our commitment to quality work, safety, and integrity. Our experienced teams use state-of-the-art equipment and adhere to the highest industry standards. About the Role: We are seeking a highly motivated and experienced Field Supervisor to oversee daily operations of industrial services crews in Channelview, TX. This key leadership role bridges field employees and division management, ensuring safety, productivity, and customer satisfaction on every job. Ideal candidates will have at least 2½ years of industry experience and a proven track record in team supervision. This is a safety sensitive role. Key Responsibilities: • Provide daily supervision over assigned field crews and ensure high performance standards, • Conduct job hazard assessments and enforce safety practices, • Assign personnel and equipment to meet job requirements, • Investigate and resolve customer complaints in a timely manner and communicating with upper management of complaints., • Conduct safety meetings and accident investigations, • Evaluate, train, and mentor employees including "on-the job" performance appraisal and disciplinary actions in accordance with company policy., • Inspect equipment periodically to ensure equipment meets safety and maintenance standards, • Monitor job productivity and customer satisfaction, and perform manual labor if necessary to assist team with the job, • Support staffing, scheduling, and resource planning, • Any other duties assigned Qualifications and Experience: • High school diploma or GED required, • Hydro excavation experience required, • Minimum 2½ years in an industrial setting, • Prior experience in leading a team and/or supervisory roles., • Strong communication, problem-solving, and leadership skills, • Ability to read reports, budgets, and job scopes, • TWIC card, • Valid driver's license Physical Requirements: • Pass a physical exam, drug testing and background checks, • Lift up to 50 lbs and work in extreme weather/environmental conditions, • Working in confided spaces, working at heights, outdoors, etc., • Capable of working long shifts (up to 16 hours/day, 14 days consecutively), • Operate high-pressure water equipment and vacuum hoses safely Workplace Policy: This is a drug and alcohol-free workplace. In addition to previous employment verification and background check, you must submit to a pre-employment physical, drug and alcohol screen, and ongoing random testing to maintain compliance with Federal, State, and customer requirements. Benefits: • 401(k) with employer match, • Medical, Dental, and Vision insurance, • Employer-paid LTD and Life insurance with employee buy-up options, • Additional supplemental insurance, • On-the-job training, • Opportunities for advancement, • Paid time off, • Paid holidays, • Overtime opportunity Schedule: • 8-10-12-16 hour shifts, • Overtime available, • Work Location: On-site or travel may be required to other job sites

Job DescriptionTop Ranked Employer is growing their team in Houston, Texas This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $85,000 - $110,000 per year A bit about us: Established Manufacturers Representative company that provides HVAC, Building Automation, and plumbing products throughout Texas . Why join us? • Comprehensive medical, dental, and vision plans ., • Competitive PTO package, • Paid Holidays, • Short Term, and Long Term Disability, • 401(k) Savings Plan Job Details We’re seeking a skilled Building Automation Controls Technician to join our dynamic team. In this role, you will be responsible for installing, maintaining, and troubleshooting advanced building automation systems—specifically Siemens BAS platforms—ensuring optimal performance, energy efficiency, and occupant comfort. Key Responsibilities • Install & Commission: Set up Siemens building automation systems (e.g., Desigo CC, Apogee) including controllers, sensors, valves, and network components., • Service & Maintenance: Diagnose and resolve operational issues such as HVAC control logic, network connectivity, and BAS device faults., • Programming & Configuration: Adjust control sequences, BACnet/IP or LonWorks networks, alarms, and schedules within BAS software applications., • System Integration: Coordinate ownership data, tag structures, graphics, and third-party integrations (e.g., meters, chillers, BMS)., • Testing & Validation: Conduct functional testing and performance validation during commissioning and after system updates or upgrades., • Technical Support & Training: Provide onsite and remote troubleshooting, firmware upgrades, and user training for facility staff., • Documentation: Maintain as-built drawings, point matrices, service reports, and update device inventories., • Minimum 3–5 years working with Siemens building automation systems., • Proficient with BAS platforms (Siemens Apogee, Desigo CC, DXR, etc.), BACnet/IP, analog/digital I/O, and field devices., • Hands-on experience installing controllers, sensors, valves, and conduits., • Skilled in diagnosing communication, logic, and hardware issues., • Certifications (Preferred): Siemens CERTIFIED (Apogee, Desigo), OSHA 10-hour, EPA Section 608., • Driver’s License: Valid TX driver’s license with clean driving record for travel between sites. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Description Become part of an inclusive organization with over 40,000 teammates, whose mission is to improve the health and well-being of the unique communities we serve. This position is eligible for our Clinical Laboratory Incentive Program. To learn more on the incentive program guidelines and eligible positions, visit Schedule: Monday - Friday 7:00am to 3:30pm with participation in rotating on-call schedule. Summary: Performs a variety of patient testing and administrative tasks in support of the clinical activities in the UNCHCS. Performs high complexity testing in the Flow Cytometry lab to support various programs for both Clinical Pathology and Hematopathology. Responsibilities: 1. Investigates problems with equipment, test results, specimens, and/or workflow., 2. May participate on teams or perform special projects/assignments., 3. May perform teaching of Clinical Laboratory Science students and Pathology residents and training of new employees. May serve as a technical resource., 4. Performs quality control and equipment maintenance in the appropriate laboratory., 5. Performs routine and less standardized test procedures which includes special chemical, microscopic and bacteriologic laboratory tests. Observes tests and reactions and provides data., 6. Prepares specimens and reagents, solutions, heat, or filters as required., 7. Reports results to healthcare providers. Consults/confers with health care providers regarding test results., 8. Reviews test results to ensure accuracy of report and timely correction of errors. Other Information Other information: Education Requirements: ● Requires Bachelor's of Science degree. Must meet eligibility requirements upon hire to sit for MT exam within 12 months of hire. Licensure/Certification Requirements: ● Must obtain certification within one year of becoming exam eligible. Professional Experience Requirements: ● No prior experience required. Knowledge/Skills/and Abilities Requirements: Job Details Legal Employer: STATE Entity: UNC Medical Center Organization Unit: Transplant Services Labs Work Type: Full Time Standard Hours Per Week: 40.00 Work Schedule: Day Job Location of Job: US:NC:Chapel Hill Exempt From Overtime: Exempt: No Work Assignment Type: Onsite Salary Range: $26.59-$38.23 (Hiring Range) Pay offers are determined by experience and internal equity Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. UNC Health makes reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as applicants and employees with disabilities. All interested applicants are invited to apply for career opportunities. Please email if you need a reasonable accommodation to search and/or to apply for a career opportunity. Company DescriptionUNC Health is an integrated health care system owned by the state of North Carolina and based in Chapel Hill. UNC Health is committed to empowering health, not just health care. From Magnet recognition to being named one of America's Best Employers by Forbes Magazine, we're proud to say that our hard work is consistently recognized, awarded, and celebrated.UNC Health is an integrated health care system owned by the state of North Carolina and based in Chapel Hill. UNC Health is committed to empowering health, not just health care. From Magnet recognition to being named one of America's Best Employers by Forbes Magazine, we're proud to say that our hard work is consistently recognized, awarded, and celebrated.

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for a Orion Thermal Protection System (TPS) Engineer to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Lead subsystem management for the Orion Heatshield, including certification planning, testing, and build oversight., • Oversee the development of thermal models, stress analyses, and test techniques to ensure successful heatshield certification., • Evaluate proposed designs and specifications for Avcoat blocks, identifying deficiencies and recommending alternative approaches to meet technical and safety requirements., • Direct thermal analysis and test efforts performed by NASA civil servants and contractors across multiple centers., • Assess all heatshield related hardware designs and supporting data at critical design and hardware acceptance reviews., • Coordinate material property testing to support thermal and mechanical model development, delivering ablative thermal material models to Lockheed Martin for thermal sizing., • Define and manage test plans for arc jet and radiant heatshield test programs., • Provide on-site technical expertise for block bonding and gap filling operations at Kennedy Space Center., • Compile certification evidence, track verification completion, and develop certification of flight readiness statements., • Provides status and update reports to the Organization Chief and to Directorate management., • Provide technical authority and consultation on Entry, Descent and Landing (EDL) system design, testing, and analysis to programs across NASA., • Develop strategies for advancing EDL technologies for current and future exploration spacecraft., • Lead technical meetings, represent the organization at conferences, and build partnerships with industry, government agencies, and universities., • Mentor junior engineers, interns, and academic researchers in EDL systems analysis and testing., • Advise management on priorities, feasibility, and risks of EDL technology development projects. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a minimum of a bachelor's degree in Engineering and normally possess 5-10 years of related experience. License and certification may be required., • BS degree in Mechanical or Aerospace Engineering from an accredited engineering school., • Minimum of 5 years of engineering analysis experience related to thermal control systems., • Experience working with complex, vehicle level models with multiple system interactions, • Excellent technical writing skills and the ability to use data to draw conclusions and - support the conclusions when challenged., • Excellent presentation skills., • Experience with developing and reviewing simulation models of spacecraft hardware and systems at varying levels of fidelity ranging from detailed, first-principal - models to more descriptive lumped-parameter models., • Experience with flight hardware test plan development and execution., • Experience with requirements definition and validation of space flight hardware., • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job DescriptionSalary: $110,000 - $140,000 CONTROLLER Position Overview: The Controller at Cherco plays a key role in the financial team, ensuring the accuracy, reliability, and integrity of the company's financial records. This position involves detailed financial operations, including account reconciliations, financial reporting, and support for special projects and financial audits. The Accounting Analyst's diligent efforts underpin Chercos commitment to excellence and strategic goals. The position is full-time and in-office. Key Responsibilities: Financial Record Integrity & Reconciliation: Conduct detailed bank and account reconciliations, maintain ledger integrity, identify necessary accruals, and collaborate on financial data management improvements to achieve 100% accuracy in financial records. Month-End Financial Close Process: Prepare and post journal entries accurately, collaborate with departments to gather financial information, assist in the preparation of financial statements, actively support the Accounts Receivable team, and ensure adherence to accounting standards, thereby meeting month-end closing deadlines consistently. Documentation of Accounting Processes & Procedures: Develop and maintain documentation for accounting processes and procedures, identify areas for improvement, and conduct training on these procedures to establish a detailed, efficient, and standardized accounting process. Special Projects & Financial Audit Support: Support special projects as requested by management, participate in accounting system testing and reconciliation, prepare financial documents for audits, and provide auditors with necessary information and explanations, ensuring the successful completion of special projects and financial audits. Qualifications: Technical Proficiency in accounting principles 1+ year of NetSuite ERP experience, or similar 6-10 years of experience in Accounting (public or industry) Analytical abilities for detailed financial analysis Attention to Detail in all financial documentation Commute to this job's location in Northwest Houston Adaptability to manage various tasks and changes Problem-Solving skills to address and resolve issues effectively Communication skills for effective collaboration Time Management to prioritize work and meet deadlines Collaboration and Teamwork in line with company culture Continuous Improvement mindset for personal and process enhancement Ethics and Integrity to uphold financial accuracy and compliance Company Overview: Headquartered in Houston, Texas, CherCo is an energy infrastructure company specializing in contracted compression and aftermarket services. Founded in 2021, CherCo provides dual-fuel (gas and electric) compression services in a wide range of horsepower (HP) offerings to operators throughout Texas, New Mexico, Louisiana and Oklahoma. CherCos aftermarket services division provides preventive maintenance, overhauls and equipment rebuild, engine overhauls and swing engines, part sales and used equipment sales for those who chose to own their own compressors. Featured benefits Medical insurance Vision insurance Dental insurance 401(k) Skills Financial Close Process, Account Reconciliation, Accounting, Accounting Standards, Financial Audits, NetSuite and MS Excel. Business Intelligence reporting software a plus but not required.

Job DescriptionAbout OptiSigns OptiSigns is a Houston-based B2B SaaS company that helps more than 22,000 businesses engage customers and employees through intuitive digital-screen solutions. We believe great software should feel effortless—even to non-technical users—and that thoughtful design is as critical as solid engineering. Why this role exists We’re expanding our product line and need a craft-obsessed engineer who can own the entire front-end experience—from Figma designs to pixel-perfect production code. If you love sweating the details of typography and motion and thrive in a codebase, you’ll fit right in. What you’ll do 40% – Design delightful UIs in Figma: information architecture, low- to hi-fi mock-ups, interactive prototypes, component libraries, accessibility states, and responsive breakpoints. 40% – Build the designs using modern HTML, semantic CSS/SCSS (or Tailwind), TypeScript, and React (Next.js) or Angular. Maintain a clean, reusable component system. 10% – User-test & iterate: run quick usability tests, interpret analytics/heatmaps, and turn findings into improvements. 10% – Collaborate & ship: work with product managers, full-stack/backend engineers, and QA to deliver features end-to-end, review PRs, and improve our DX tooling (Storybook, ESLint, Husky, etc.). Requirements What you bring • 0–3 years building customer-facing web apps (portfolio or live products required)., • Mastery of Figma (auto-layout, variants, design tokens, FigJam)., • Production experience with React or Angular, modern TypeScript, and component architectures., • Deep understanding of HTML semantics, CSS layouts (Flexbox / Grid), responsive design, accessibility (WCAG 2.2), and performance optimizations., • Familiarity with design systems (Material, Ant, Radix, or your own), animation libraries (Framer Motion, GSAP), and testing (Jest, Testing Library, Cypress)., • Comfort working in an Agile, CI/CD environment (GitLab CI/CD, Vercel/AWS)., • A user-centric mindset—ability to translate business goals into intuitive flows and elegant interactions., • Excellent written & verbal communication. Bonus points, • Experience with data-heavy dashboards or B2B SaaS UX., • Knowledge of Node.js, • Medical, dental, and vision insurance, • Flexible schedule & remote-friendly culture (Houston HQ for those who prefer in-office), • Generous PTO & paid holidays, • 401(k) with match (coming 2025), • Monthly learning stipend (courses, conferences, books), • Latest MacBook Pro / dev setup of your choice We review every application personally and respond within a week. Ready to craft experiences that thousands of businesses use every day? Apply now and let’s build something beautiful together.

Job Description Receptionist - Gillman Subaru The Gillman Companies is an established group of family-owned automobile dealerships based out of Houston, TX. We have served the automotive needs of Texas since 1938 by maintaining a long-established tradition of excellence and customer satisfaction. Gillman has been named one of the Houston Chronicle's Top 100 Workplaces for 11 years! Duties and Responsibilities: • Greets customers at the cashier window in a pleasant and professional manner., • Computes customer bills., • Receives cash, checks, and credit card payments from customers; records amount received., • Make changes and issues receipts to customers., • Provides cash refunds or credit memorandums to customers for returned merchandise., • Operates cash register., • Reconciles cash drawer daily., • Refers customers who have questions about the work that is performed, additional maintenance or repairs, etc. to the services advisor or other appropriate individual., • Handles customer complaints with integrity and poise and, when necessary, refers dissatisfied customers to the appropriate individuals for resolution., • Maintains and files repair orders and rental forms; lists missing documents., • Closes all open invoices., • Assists the service department with telephone coverage., • Provides clerical assistance to the service department., • Works with department managers to keep abreast of new products and services offers, their features and value, and any changes in price., • Maintains a professional appearance., • Keeps work area neat and clean., • Ability to read, comprehend and write instructions and information, • 2+ years of experience, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals, • Basic skills with computer and other office machines (copier, credit card machine, telephone, adding machine) necessary to perform the cashiering/clerical duties, • Professional personal appearance, • Ability to work well with customers and present a friendly, helpful attitude at all times, • Medical/Dental/Vision/Life, • 401K with company match, • Paid vacation, • Employee discounts, • Drug-Free work environment E.O.E About: Since 1938, The Gillman Companies have been a family-owned and operated group of automobile dealerships. With over 80 years of success, the Houston-based automotive group has 10 dealerships across Houston, Rosenberg, San Benito, Harlingen, and San Antonio representing Honda, Mitsubishi, Nissan, Chevrolet, GMC, Chrysler, Dodge, Jeep, and Subaru. The company was founded by Frank Gillman when the first dealership opened on Milam Street in downtown Houston. Frank knew the importance of customer loyalty. He also understood that loyalty had to be earned. 80 years later, the location and scope of the business have changed, but the constant emphasis on customer satisfaction remains the same. Now run by Frank's Granddaughter Stacey Gillman, under her leadership, the Gillman Companies have grown to become one of the largest retail automotive groups in America. And today, the third Gillman generation is active in the business. Success has not altered the organization's founding principle. Every employee in every Gillman dealership knows customer satisfaction is paramount. And, they understand continued prosperity, as well as future growth, depends upon maintaining this long-established tradition of excellence.

Job Description Overview Are you looking for a career you can feel good about? We hire only those that strive to do their best. By joining our family, you'll receive the honor and recognition that comes with working for the industry's global leader in evidenced based rehabilitation. Who We Are: GEO provides complementary, turnkey solutions for numerous government partners worldwide across a spectrum of diversified correctional and community reentry services. From the development of state-of-the-art facilities and the provision of management services and evidence-based rehabilitation to the post-release reintegration and supervision of individuals in the community, GEO offers fully diversified, cost-effective services that deliver enhanced quality and improved outcomes. Why Work for GEO: • We believe that work is more than a place you go to every day. It is about being inspired and motivated to achieve extraordinary things., • Employee benefits play an important role in making The GEO Group a great place to work. At GEO, we believe in the three pillars of employee wellbeing: physical, emotional, and financial. With comprehensive benefits and competitive wages, we trust that you will find all the resources you need here to be successful. Responsibilities Summary Under direct supervision, maintain continuous state of alertness and awareness to control and secure the facility and residents. Operate within legal constraints and contract agency stipulations. Primary Duties and Responsibilities • Prior to relieving the watch, ensure that the equipment necessary for each watch is operational, radios, flashlights, and keys. Prepare shift documentation (i.e., end of shift reports, work orders, security reports, unusual incidents, etc.) that is legible and concise and that meets standards and contracting agency requirements., • Receive from the Monitor I leaving the watch all information pertaining to events that transpired during the shift, (resident medical problems, disciplinary problems, new arrivals, etc.) and any special instructions. Make an entry in the security log showing the time the watch was relieved noting name and title., • Conduct radio checks, reporting radio malfunctions immediately., • Conduct facility counts at the prescribed times and ensure the logbooks in the buildings are accurate as to count., • Frequently patrol building to observe and listen to individual residents and groups of residents and monitor the state of the building. Examples of activities include smelling for marijuana and/or unauthorized tobacco use; listening to conversations; ensuring doors and windows are properly secured., • Organize and supervise resident work details to assist in maintaining facility cleanliness to ensure that facility meets and contracting agency requirements., • Perform the following activities on both a scheduled and random basis: urinalysis testing, pat downs, shakedowns, counts, breath tests, etc., to maintain control and security of the residents and facility., • Document disciplinary action for rule violations according to procedure, to comply with contracting agency requirements, and log accordingly., • Conduct scheduled and impromptu cleanliness checks of the facility to maintain it in an orderly and clean fashion to meet health and environmental requirements. (Includes all rooms within the facility and residents’ personal belongings.), • Make initial contact with any visitors and verify their identity. Be professional and courteous while assisting visitor or government officials with resident affairs (e.g., arrival, release, etc.)., • Communicate with residents and staff in a professional manner to affirm and enhance self-esteem and dignity, and to maintain positive resident/staff relations., • Participate in staff meetings by sharing observations and recommendations regarding the facility, residents and staff relations to identify and resolve problems and function as a unified team., • Maintain confidentiality obtained through job duties regarding employees, vendors, residents, outside agencies, etc., so that sensitive information is only given on a "need to know" basis., • Comply with policies and work rules as described in the company Employee Handbook, the Statement of Work, and the Facility Policies and Procedures Manual, including directives of managers and supervisors in a cooperative spirit to ensure conformance to company standards., • Adhere to attendance policy; be available to work all shifts; work overtime as required, to ensure adequate coverage of the program and to ensure the safety and security of the residents., • Comply with facility safety rules; take appropriate corrective action to ensure work is performed in a safe manner and without injury to self or others., • Communicate effectively with all levels of staff in a manner that promotes a team spirit and a sense of cooperation. Qualifications Minimum Requirements • High School Diploma or GED., • One (1) year general work experience. Experience in a related field is preferred., • Must hold a current and active Driver’s License., • Sufficient organizational skills to keep the workflow on-going in an orderly manner., • Express thoughts logically, in both written and verbal form using correct grammar., • Demonstrate flexibility in order to perform a wide range of duties.

Job Description about Climatec For over 40 years, Climatec has steadily invested in their people, technology, and services to be a trusted business partner for building solutions. As part of the Bosch Building Technologies Integrator Business in North America, Climatec is one of the leading providers of building technologies and energy solutions in the nation – delivering results for thousands of customers, every day. Climatec’s strategic business partners include the world’s leading suppliers of building automation, security, life safety, and energy efficiency technologies. about Bosch The Bosch Group is a privately held supplier of innovative technology and services with over 400,000 associates worldwide. Its unique private ownership structure was established to promote entrepreneurial freedom and long-term business focus. Bosch’s operations serve millions of customers across four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. Job Duties and Responsibilities: • Establish contact with prospects and qualify potential buyers by scheduling sales calls, following up on leads, and utilizing Climatec marketing strategies and maintaining a high level of sales activity (i.e. prospecting, first calls, proposals, etc.), • Determine customer needs and develop a sales strategy to gain customer understanding of Company product offerings., • Demonstrate a proficient working knowledge in implementing the selling cycle from identifying and qualifying prospects and then successfully closing the sale., • Develop and maintain an active proposal backlog that will support achieving the designated sales plan., • Development of estimate and proposal for projects. Coordinate subcontractors for estimating purposes., • Develop a sales plan for assigned accounts and sales opportunities to include qualifying and prioritizing opportunities and maintain appropriate sales activity records. Allocate time effectively with the goal of meeting or exceeding assigned goals., • Assume account management responsibility to assure complete customer satisfaction., • Develop technical skills to thoroughly understand the functionality of Climatec products and our competitor’s products as they relate to overall building function while addressing customer needs and position Climatec favorably in the market., • Be aware of local and national codes that drive specific systems and building configurations., • Provide leadership and input to others as requested or required to assist in the accurate estimation, design, installation, start up, commissioning, and training for building systems., • Communicate and establish relationships with sales related entities as required such as consulting engineers, building owners, and contractors to assist in advancing Climatec’s competitive position on projects., • Ability to work as a team member, which may require working with other sales representatives in Climatec., • Actively participate in outside organizations associated with the aspects of construction deliverables., • Provide support for ongoing service engineering and support for existing building systems., • Development and maintenance of all required sales and expense reports in a timely manner. Minimum Qualifications • Minimum of a high school diploma or GED., • An understanding of basic computer systems including MS Office Suite of products., • An understanding of Project Design and Construction Tier Knowledge., • 2+ years’ experience working in a sales environment with the understanding of meeting and/exceeding sales targets, quota’s and performance metrics., • Two year technical degree in HVAC or Electronics related studies preferred. An undergraduate degree in Electrical, Mechanical, Construction Management, or other related studies is highly desirable., • Experience leading sales teams within the HVAC or Building Automation Systems industry, • Experience working with Building Automation Systems such as Tridium/Niagara, Alerton, or Honeywell, • 2+ years’ experience identifying, developing, and closing new business opportunities in building automation systems (BAS), and/or HVAC controls., • 2+ years’ experience of working knowledge of Building Automation Systems and HVAC controls, • 2+ years’ experience prospecting and qualifying new business opportunities in and/or outside of your assigned territory., • Be able to lift and carry drawings, personal computers, material, etc., • Maintain a satisfactory driving record which, per Climatec’s vehicle policy, allows the individual to operate a vehicle for company-related business., • Be physically able to kneel, stoop and crawl., • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionDescription: AES Drilling Fluids is a dynamic, every changing, innovative organization that is adding a Full Stack Developer position. At AES Drilling Fluids we offer great benefits, competitive salary, paid overtime, opportunity for bonuses and a stable work environment with advancement opportunities. We seek local candidates that want to build a career and join our great culture! AES is looking for someone that enjoys taking ownership of projects from concept to completion. This position will work with a small team and have freedom to learn a variety of new technologies, make sweeping code changes without months of QA, and truly makes an impact on the business. Fantastic benefits! • Employer paid life and disability insurance, • Low-cost medical / dental / vision insurance, • Paid time off / generous holidays, • Hybrid work schedule, • 401K (6% match) WORK LOCATION: Houston, TX RESPONSIBILITIES: • Participates in analysis, design, and development of efficient connections between our ERP and a number of other technologies., • Designs and develops applications across multiple modules utilizing .NET, C#, Angular, .NET Core, Entity Framework Core, etc., • Writes optimal and efficient code using object-oriented programming, design patterns and best practices., • Provides full technical documentation to a given standard while storing as directed., • Confirms program operation by coordinating with colleagues to conduct necessary tests; while debugging and modifying program sequence and/or code., • Performs scheduled maintenance as required and supports existing application., • Arranges project requirements in programming sequence, providing estimations on deliverables using knowledge of computer capabilities, subject matter, programming language, and logic., • Develops solutions for all tiers of the application: user interface, business logic, database, workflows, and reporting and be a key contributor to innovation while building proof of concept examples that can be leveraged across current and future solutions., • Performs other duties as assigned.Requirements:, • Associates or Bachelor’s degree in Computer Science or related is preferred., • (5-10) Five to ten years of developer experience with a preference in some front and back-end experience., • (5) Five years working with the .NET stack to deliver back-end web and service applications using C#, .Net Core and Entity Framework Core., • (2) Five years of experience working with either a relational database (SQL Server, MySQL etc.) or a NoSql database (MongoDb, RavenDb etc.)., • Experience developing responsive web applications using Angular 9 or 10, Angular Material, Typescript, RxJs, Redux, HTML and CSS3., • Experience creating micro services using C#, .NET Core, and a message queue broker such as RabbitMQ or Redis., • Experience with testing and documenting back-end APIs using tools such as Postman and Swagger., • Knowledge in creating back-end automation and processing tasks using a library such as Hangfire. AES Drilling Fluids regrets that it is unable to sponsor employment Visas or consider individuals on time-limited Visa status or to offer relocation for this position. AES Drilling Fluids is currently not engaging third party firms for candidate sourcing.

Job Description One Behavioral offers a continuum of psychiatric services for children and adolescents, ages 4-17, and for adults, age 18 and older. Located in Houston, Pearland, Pasadena, Friendswood, Sugar Land and Katy, we strive to provide a warm environment that promotes crisis resolution, positive self-awareness, social skills, and personal growth. We are proud to be your community partner in mental health. Who Are We? Our mission at One Behavioral is to cultivate empowered and self-aware human beings. Our values are guided by five principles: client-centric care, judgment-free care, environmental awareness, striving for innovative treatment, and commitment to our staff. One Behavioral consists of multiple providers of all levels, working together to address every type of psychological concern with skill and sensitivity. Our approach to behavioral health is all-encompassing, including new and innovative treatment options, therapy, medication management, and psychological testing. We believe in comprehensive care and key collaboration. What Are We Looking For? One Behavioral is on a continued path for growth. We are looking to add full-time Psychiatric Mental Health Nurse Practitioners (PMHNP) or Physician Assistants (PA) specializing in Behavioral Health to our team. This position is Monday - Friday with no weekend calls. We hope that our providers will contribute to our mission and embody our values. In addition to patient care, employee satisfaction is our top priority. Opportunity Details: • Outpatient setting, treating patients across the lifespan., • Bi-monthly team meetings with supervising physicians and bi-monthly Continuing Education Symposiums with peer providers and supervisors., • Skills and knowledge-based fit to accommodate the correct fit for Supervisor-Supervisee relationships., • One Behavioral is ideal for new graduates and those early in their careers, as we strive to educate and help our providers grow with the help of our supervising providers., • Flexible work schedule (Full-Time, Part-Time , or 1099 Contract), • Our salary offers include a comprehensive benefits package, including competitive salaries, medical, dental, vision, 401k with match, PTO, paid holidays, malpractice coverage, reimbursement for DEA and Licensing renewals, catered lunches, and other workplace perks. Requirements: • Board-certified Psychiatric Mental Health Nurse Practitioner (PMHNP) or Physician Assistant (PA)., • Bi-lingual (preferred)., • Licensed to practice (license in good standing) in Texas is required at the time of hire. You can learn more about us at . Powered by JazzHR WTrrC9CoHy

Job DescriptionBenefits: • 401(k), • Health insurance, • Paid time off AGT Food Testing (Formerly part of A&B Labs) provides analytical testing to the Food Manufacturing, Agricultural, and Cosmetic and Pharmaceutical industry. We are rapidly growing and expanding our capabilities in the Food and related industries. Job highlights Qualifications 8 years or more applicable industry experience. Ability to travel 50% of the time. Bachelors degree in Biological Sciences. Familiar with ISO/IEC 17025:2017, cGMP, FSMA and FSIS guidelines. Excellent communication skill, positive attitude and self-motivated. Proficient in LIMS and other software applications. Responsibilities Expand sales & promote company vision and objectives. Identify new business opportunity and grow total sales. Develop Strategic Business Development Plan targeting the Food, Cosmetic and Pharmaceutical Industry. Develop Monthly Sales Forecast, Budget and meet the target. Develop short-, medium- and long-term business strategies for business growth. Procure contracts with schools, multinational food companies and agricultural corporations. Pursue leads on FDA Red Alert and FSVP Importers and convert them into clients. Maintain all client information regarding visits, communication, quotes in the LIMS. Food Testing Houston, Texas Job Title Sales Manager Job Description Sales Location Houston, Texas Contact Salary $75,000 - $100,000 Keep management informed of latest development in the industry, services, market opportunities and competitors. Identify client technical needs and capacity. Identify new market leads. Set and achieve financial goals. Work with client services, lab operations and marketing to ensure existing client requests are met. Visit and call clients on a regular basis. Maintain and grow current accounts. Conduct SWOT analysis to maintain sales growth. Work Authorization Must be a citizen of United States of America. Benefits Eligible for sales commission as per AGT sales structure. Medical Insurance, Dental Insurance, 401k as per company policy. Vacation: Paid 10 vacation days after one year of continuous employment and 5 sick days each year.