Noise jobs in Wayne, New JerseyCreate job alerts

PURPOSE AND SCOPE: The professional registered nurse Outpatient RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. · Performs all essential functions under the direction of the Supervisor and with guidance from the Clinical Educator, Preceptor or in collaboration with other Registered Nurses. · Performs ongoing, systematic collection and analysis of patient data pre – during – post hemodialysis treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Team Leader, Charge Nurse, Supervisor or Physician as needed. · Assesses, collaborates, and documents patient/family’s basic learning needs to provide initial and ongoing education to patients and family. · Directs and provides, in collaboration with direct and ancillary patient care staff, all aspects of the daily provision of safe and effective delivery of hemodialysis therapy to assigned patients. · Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. · Initiates or assists with emergency response measures. · Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. · Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. · Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. · Ensures patient awareness related to transplant and treatment modality options. · Required to complete CAP requirements to advance. · Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. · This position requires frequent, prolonged periods of standing and the employee must be able to bend over. · The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. · The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. · May be exposed to infectious and contagious diseases/materials. · Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. · The position may require travel to training sites or other facilities. · May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above. SUPERVISION: Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a Team Leader or designated Nurse in Charge, after meeting all the following: · Successful completion of all FKC education and training requirements for new employees. · Must have a minimum of 9 months experience as a RN. · Must have a minimum of 3 months experience in chronic/acute hemodialysis as a RN. EDUCATION and LICENSURE: · Graduate of an accredited School of Nursing. · Current appropriate state licensure. · Current or successful completion of CPR BLS Certification. · Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: · Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. · Chronic/acute hemodialysis experience (preferred). ACKNOWLEDGEMENT: I acknowledge that I have read and accepted this job description. I understand what is expected of me in this position, and I am able to perform the essential functions as outlined with or without reasonable accommodation. Furthermore, I understand that the duties and responsibilities listed in this job description are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. If I have any questions about duties and responsibilities not specified in this job description that I am asked to perform, I should discuss them with my immediate Supervisor or my Human Resources representative. ADDENDUM: FTN Group- International RN EDUCATION and LICENSURE: · Bachelor’s degree in nursing required and either a CGFNS (Commission on Graduates of Foreign Nursing Schools) Visa Screen Certificate OR an NCLEX (National Council Licensure Examination) pass letter OR a Registered Nursing License in the state of intended employment required. · Current appropriate state licensure. · Current or successful completion of CPR BLS Certification. · Must meet the practice requirements in the state in which he or she is employed EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! CNC Machinist III - Turning (2nd Shift) Overview This position's primary responsibility is to set-up and operate a variety of CNC Turning Centers including but not limited to: single and dual spindle, single and dual turret, Swiss type, gang tool, and conversation control machines to produce high quality - close tolerance products in a safe, effective/efficient manner to meet operational requirements. The candidate's expertise will be applied in a proactive manner utilizing best practices when conducting documentation review, troubleshooting, continuous improvement, equipment set-up/operation and component inspection related activities. The incumbent must be an individual who can multi-task and perform various machine shop related activities which are to be conducted in a manner that complies with company requirements (i.e., regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people within the organization to successfully support operations and the corporate strategic vision. SKILLS/EXPERIENCE: • 5+ years of related experience involving set-up and operation of precision CNC Turning Centers in an effective, efficient, safe and consistent manner (Aerospace mfg. environment preferred)., • High School/(GED) Diploma or Vocational/Technical school equivalent, • Self-motivated individual who possesses the ability to analyze, organize, plan, multi-task and achieve results through effective interaction with others., • Possess math skills required to effectively and efficiently read, interpret documents (i.e., blueprints/technical drawings, operation/tool/set-up sheets, procedures, ECN's, routers, etc.)., • Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel within the organization., • Knowledgeable in GT&D practices, inspection methods, effective utilization of measuring equipment/instruments, root cause investigations, troubleshooting, and performance metrics., • Consistently demonstrate commitment to company values, strategic plan and vision, • Must demonstrate creative thinking as it relates to machine shop processes., • Must be a US Citizen Additional Duties / Responsibilities : • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements., • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals, • Assist in the training of personnel to perform required technical tasks (as directed), • Consistently demonstrate commitment to company values, • Keep management informed of area activities and of any significant problems., • Assume responsibility for related duties as required or assigned., • Ensure that work area is clean, secure, and well maintained., • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Overtime and weekend work may be required, as job duties demand., • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility., • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. This position is at our Montville, NJ corporate offices location. Pay Range: $29-$40/hour + shift differential Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $29 - $40 per hour

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! CNC Machinist - Turning Overview This position's primary responsibility is to set-up and operate a variety of CNC Turning Centers including but not limited to: single and dual spindle, single and dual turret, Swiss type, gang tool, and conversation control machines to produce high quality - close tolerance products in a safe, effective/efficient manner to meet operational requirements. The candidate's expertise will be applied in a proactive manner utilizing best practices when conducting documentation review, troubleshooting, continuous improvement, equipment set-up/operation and component inspection related activities. The incumbent must be an individual who can multi-task and perform various machine shop related activities which are to be conducted in a manner that complies with company requirements (i.e., regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people within the organization to successfully support operations and the corporate strategic vision. SKILLS/EXPERIENCE: • 5+ years of related experience involving set-up and operation of precision CNC Turning Centers in an effective, efficient, safe and consistent manner (Aerospace mfg. environment preferred)., • High School/(GED) Diploma or Vocational/Technical school equivalent, • Self-motivated individual who possesses the ability to analyze, organize, plan, multi-task and achieve results through effective interaction with others., • Possess math skills required to effectively and efficiently read, interpret documents (i.e., blueprints/technical drawings, operation/tool/set-up sheets, procedures, ECN's, routers, etc.)., • Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel within the organization., • Knowledgeable in GT&D practices, inspection methods, effective utilization of measuring equipment/instruments, root cause investigations, troubleshooting, and performance metrics., • Consistently demonstrate commitment to company values, strategic plan and vision, • Must demonstrate creative thinking as it relates to machine shop processes., • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements., • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals, • Assist in the training of personnel to perform required technical tasks (as directed), • Consistently demonstrate commitment to company values, • Keep management informed of area activities and of any significant problems., • Assume responsibility for related duties as required or assigned., • Ensure that work area is clean, secure, and well maintained., • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Overtime and weekend work may be required, as job duties demand., • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility., • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs. This position is at our Montville, NJ corporate offices location. Pay Range: $26.00-34.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $21 - $29 per hour

Job Description Position Title: Mailroom Clerk Job Classification: Non-Exempt Type of Position: Full-time Location: Williamstown, NJ Reports to: Accounting Manager Requirements: No experience Education: High School Diploma or Equivalent TRAVEL: Approximately 0-15% Company Overview: A growing company with local roots, COPS Monitoring offers a competitive salary along with many great benefits such as Health Insurance, 401(K), Tuition Reimbursement, and great company events! The security industry is exciting, and the company offers opportunities for growth and advancement, all while maintaining a family atmosphere. Position Overview: The Mailroom Clerk will help sort, process, and distribute incoming and outgoing mail and packages for the company. They will also assist with general tasks as needed. Essential Duties: • Receive, sort, and deliver mail to the correct departments within the organization, • Process outgoing mail, • Track incoming packages, log their arrival, and arrange pickups with delivery services, • Monitor and maintain inventory of the mailroom supplies, • Maintain logs and records of mail volume, shipping costs and package tracking, • Keep the mailroom clean, organized, and stocked, • Assist with daily filing and sorting, • Assist with other general duties as needed Qualifications/Skills: • Strong verbal and written communication skills, • Ability to work independently as well as a team member, • Reliable, • High Degree of accuracy and attention to detail Physical demands, work environment, and attendance requirements: The physical demands, work environment, and attendance requirements characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Physical Demands: Minimal physical demands., • Work Environment: The noise level in the work environment is usually minimal.

Job Description Center Administrator - RN North Jersey Gastroenterology & Endoscopy Center 1852 Route 23 South Wayne, NJ Company Overview: AMSURG is an independent leader in ambulatory surgery center services, operating a network of more than 250 surgery centers nationwide. In partnership with physicians and health systems, the organization delivers high-quality care for patients across a diverse spectrum of medical specialties, including gastroenterology, ophthalmology and orthopedics. To learn more about AMSURG, visit: . Position Summary: The Center Administrator - RN is responsible for coordinating and directing activities of the Center according to accepted standards. Responsible for the fiscal activities of the center. Works collaboratively with Nurse Manager, Clinical Director, or Charge Nurse (as required) to oversee the supervision and direction of nursing care and patient scheduling, according to the centers policies, procedures, and objectives. Responsible for management of all aspects of personnel, education of personnel, and administrative duties. Works closely with the Governor’s Board and center staff in coordinating patient and staff service functions. Essential Duties and Responsibilities: Operations • Monitor FTE utilization and recommend cost-effective practices, • Oversee new employee orientation for all clinical areas, • Participate in committees, meetings, and Center activities, • Provide input on Center’s short- and long-term goals, • Ensure facility and equipment compliance and cleanliness, • Maintain operational efficiency and effective scheduling, • Supervise contracted providers (e.g., pathology, radiology, housekeeping), • Prepare staffing schedules based on skill, experience, and coverage needs, • Cross-train staff where appropriate, • Review time and attendance, manage personnel performance, • Make recommendations for staff promotions, terminations, etc., • Analyze quality assurance data and implement improvements, • Maintain regular attendance and attend required education, • Communicate regularly with Medical Director, Anesthesia Director, QAPI Chair, • Oversee and maintain credentialing programs, • Stay current on applicable laws, rules, and professional standards, • Submit required reports timely, • Interpret and implement policies, procedures, and best practices, • Support implementation of quality assessment and performance improvement plans, • Maintain and educate on policies and compliance programs, • Analyze and report QAPI data and develop action plans, • Implement best practices to ensure safety in the workplace, • Monitor environmental safety and cleanliness, • Work with Safety Officer to address safety violations, • Evaluate supply needs and manage inventory, • Monitor purchasing and equipment implementation, • Assist in developing and executing marketing plans, • Network with managed care and physician offices, • Monitor and analyze monthly operating reports (MOR), • Promote efficient use of Center resources, • Assist in budgeting and resource reporting, • Conduct cost-benefit analysis, • Engage in continuing education, • Maintain professional memberships, • Associates and/or Bachelor’s Degree from a four-year accredited College or University; Master’s Degree preferred., • Active RN License., • At least five (5) years of healthcare-management experience., • At least one (1) year experience in an ASC., • CPR Certification and ACLS-PALS Certification., • Evidence of leadership qualities., • Strong ethical and moral character references., • Language skills adequate for high-level written, interpersonal, and telephone communications in American English., • Follow the Code of Conduct and Scope of Practice, • Promote safety and report incidents, • Maintain HIPAA confidentiality, • Be detail-oriented and exhibit professionalism, • Communicate effectively in writing and speech, • Add, subtract, multiply, and divide in all units of measure, • Read, write, and speak English fluently (bilingual if required), • Interpret business documents, journals, procedures, and regulations, • Define problems, collect data, analyze, and draw conclusions, • Interpret abstract and concrete instructions, • Stand or walk for 6–8 hours per day, • Lift/push/pull up to 50 lbs, • Perform physically demanding tasks, • Good balance, coordination, and endurance, • Work hours vary, • May involve decreased lighting (e.g., laser rooms), • Quiet to moderate noise levels, • Exposure to infectious materials, blood, and cleaning agents Must pass a background check and drug screen. EOE Statement: AMSURG is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age (40 or older), race, color, religion, gender, sex, national origin, pregnancy, sexual orientation, disability, genetic information or any other status protected under applicable federal, state, or local laws. We strive to also provide a disability inclusive application and interview process. If you are a candidate with a disability and require reasonable accommodation in order to submit an application, please contact us at: careers@. Please include your full name, the role you’re applying for and the accommodation necessary to assist you with the recruiting process.

Job Description Ingenus Pharmaceuticals offers a generous Paid Time Off policy, as well as, 14 paid holidays per year. Medical, Dental and Vision benefits are offered to all associates and are effective on the 1st day of the following month after hire. Enrollment in 401k after 90 days. The Manufacturing Operator/Technician II is responsible for all functions relating to the processing of drug products; consistent with established Current Good Manufacturing Practices (cGMP), customer requirements and in conjunction with all Standard Operating Procedures (SOP). Responsible for the safe and efficient execution of their job duties, while ensuring product compliance to established standards. Major Areas of Responsibility  Execute Batch Record and logbook documentation with clear details and accuracy.  Execute the procedures used to clean pharmaceutical production equipment and facilities.  Operates pharmaceutical production machinery and executes procedures for manufacturing such as dispensing, mixing, coating, encapsulating, granulating, drying, milling, blending, compressing etc.,  Executes total changeovers and cleaning.  Identifies and assists in the corrective actions of processing related issues.  Maintains production reporting for assigned work unit operation.  Performs required in-process product quality checks and document accurately.  Execute procedures to complete tasks in a safe, compliant and efficient manner.  Works in collaboration with others as part of a team.  Assists with on the job training of other production trainees and operators.  May determine methods and procedures on new assignments and may provide assistance to other support personnel.  Effectively communicates issues to supervisor.  Adheres to all cGMPs, compliance/regulatory mandates and quality requirements.  Assists in the identification and implementation of continuous improvement opportunities.  Performs other related duties as assigned to meet departmental and Company objectives. Required Knowledge, Skills and Abilities  Knowledge of Metric and English weighing and measurements systems.  Basic understanding of mechanical machinery and the operating principles of control systems.  Demonstrated mathematical ability in addition, subtraction, multiplication, division, ratios and percentages.  Ability to use a calculator.  Ability to follow both verbal and written instructions including SOP’s and Batch Record documentation.  Accurate and precise in recording data and batch information.  Ability to work in both independent and team environments.  Proficient in reading and writing English to understand work instructions and document results.  Ability to operate pharmaceutical processing equipment.  Ability to meet required standards of cGMPs.  Demonstrated understanding of the unit operations and the ability to assist with on-the-job training of manufacturing trainees and operators. Education and Experience  High school diploma or general education diploma (GED).  Two years’ related experience or equivalent technical training/certification preferred; or a combination of related experience and technical training/certification. Physical Demands The physical demands described here are representative of those that must be met by an individual to successfully perform the essential functions of this job:  Stand, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, and hear without any aids.  Capable of lifting or carrying and walk with a minimum of 30 kg alone without any support or aid and higher weights with support or aid as required.  Capable of moving the machines, filled containers, and other accessories alone or with support or aid as required.  Work different operational shifts from time to time as required.  Weekends / holidays and extended hours as required.  Have clarity of vision at 20 feet or more and 20 inches or less with the ability to judge distance and space relationships, bring object into sharp focus and see up and down or to the right or left while fixed on a point. Must also have the ability to identify and distinguish colors.  Operate trucks and other industrial vehicles to transfer the containers/production equipment.  Manufacturing operator/technician II are expected to operate any industrial machinery such as Forklifts, Hi-Lo, Reach Truck, Hand truck, Pallet Jack, Drum lifter etc. to lift, carry, push, pull or otherwise move objects. Work Environment The work environment characteristics described here are representative of those an individual encounter while performing the essential functions of this job:  Sufficient noise to occasionally cause the individual to shout in order to be heard above the ambient noise level.  Individual is in a proximity to moving mechanical parts, electrical current and exposure to chemicals.  Atmospheric conditions sometimes expose individual to dust, for which protective equipment is available.  Individual may be required to wear respiratory devices that include but are not limited to: Air Purifying Respirators (APR) which include half-face (Dust / Mist Respirator & Half-Face Air Purifying Respirator) and full-face negative pressure respirators  Individual may be required to wear hearing protection under certain conditions  Any employee required to use any type of Air Purifying Respirator must not have facial hair and must be cleanly shaven to assure a proper seal. Ingenus Pharmaceuticals LLC. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Company DescriptionIngenus Pharmaceuticals wants to hear from you. Ingenus Pharmaceuticals is at the forefront of the rapidly growing generic medication industry, delivering access to safe, quality medications to U.S. consumers all across the healthcare continuum. Our company is built around the principles of innovation and ingenuity, a world-class leadership team, and—most importantly—the best and brightest people in the pharmaceutical industry. Are you ready for a new challenge? Do you enjoy working with a diverse group of patients, suppliers and partners? Then come to Ingenus, where you can truly make a difference; where together, we change the world, one medication at a time. We set high standards and reward them with competitive benefits. If you consider yourself a standout in your profession, let’s talk to find out if we are the right fit for you.Ingenus Pharmaceuticals wants to hear from you. Ingenus Pharmaceuticals is at the forefront of the rapidly growing generic medication industry, delivering access to safe, quality medications to U.S. consumers all across the healthcare continuum. Our company is built around the principles of innovation and ingenuity, a world-class leadership team, and—most importantly—the best and brightest people in the pharmaceutical industry. Are you ready for a new challenge? Do you enjoy working with a diverse group of patients, suppliers and partners? Then come to Ingenus, where you can truly make a difference; where together, we change the world, one medication at a time. We set high standards and reward them with competitive benefits. If you consider yourself a standout in your profession, let’s talk to find out if we are the right fit for you.

Job DescriptionDescription: Allstate Can, a division of The Ohio Art Company, is in search of a Maintenance & Set Up Mechanic. This position will be required to work 4 days a week (M-Th 6a-4:30pm) with overtime potential on Fridays. The Maintenance & Set-Up Mechanic will be responsible for installing, maintaining, and repairing high-speed production equipment used in the manufacturing of metal cans. Working under the terms outlined in the collective bargaining agreement, this role will ensures optimal machine performance, contribute to minimizing downtime, and support the overall production goals. Key Responsibilities: • Set up, adjust, and maintain production machinery such as body makers, neckers, trimmers, flangers, and other can-making equipment., • Perform scheduled preventative maintenance (PM) tasks on automation equipment, focusing on electrical, pneumatic, and mechanical systems., • Interpret and modify electrical schematics, ensuring system integrity., • Diagnose and repair issues in PLCs, VFDs, and other control systems., • Troubleshoot mechanical, pneumatic, and hydraulic issues to ensure minimal downtime., • Use precision tools and measuring instruments to ensure accurate setups and alignments., • Maintain detailed and accurate maintenance logs and equipment service records, following all documentation procedures., • Comply with all plant safety policies and procedures, including proper lockout/tagout practices and use of PPE., • Participate in safety meetings, training sessions, and job audits as required., • Collaborate with electricians, shop foremens and production operators per union craft jurisdiction guidelines., • Support and contribute to continuous improvement initiatives and lean manufacturing practices.Requirements:, • High school diploma or GED required; technical or trades school certification preferred., • Minimum 3 years of experience in a manufacturing or industrial maintenance role, preferably within can-making or metal packaging industries., • Proficient in reading and interpreting mechanical blueprints, schematics, and technical manuals., • Strong mechanical aptitude, including experience with gears, belts, bearings, and alignment of moving parts., • Ability to operate hand and power tools, grinders, and basic machining tools safely and effectively., • Familiarity with union shop protocols and maintenance work rules under a collective bargaining agreement. Working Conditions: • This is a full-time, hourly position governed by the International Association of Machinists & Aerospace Workers (IAMS contract)., • Work to be performed in a manufacturing environment with exposure to noise, heat, and moving equipment., • Physical requirements include standing for extended periods, lifting up to 50 lbs, and working in confined or elevated spaces. Benefits: • Overtime opportunities per seniority and operational need, • Company-offered medical and life insurance plans & Union-sponsored dental, vision, and retirement benefits., • Paid holidays, vacation, and other time off as outlined in the CBA

Job Description We are seeking a dedicated and knowledgeable Boiler Room Tech to join our facilities team. This role is primarily responsible for the maintenance, operation, and troubleshooting of boiler systems, steam rooms, and related utilities. The ideal candidate will have hands-on experience with industrial boiler systems, steam generation equipment, and a solid understanding of utilities engineering principles. This position is during our 2nd Shift from 5PM-1:30AM Responsibilities • Operate, monitor, and maintain high- and low-pressure boiler systems and steam room equipment., • Conduct routine inspections and preventive maintenance to ensure safe and efficient system performance., • Troubleshoot and repair equipment issues to minimize downtime and ensure consistent utilities support., • Maintain logs, records, and documentation for compliance with safety and operational standards., • Collaborate with other maintenance staff and departments to support production needs., • Ensure compliance with OSHA, EPA, and other regulatory bodies as applicable., • Assist with utility upgrades, system installations, and equipment modifications as needed., • High School Diploma or GED (required)., • Proven experience working with boiler systems and steam room equipment (minimum 2 years preferred)., • Knowledge of utilities engineering principles, including steam, water, and compressed air systems., • Familiarity with mechanical, electrical, and control systems related to boiler operations., • Ability to read and interpret technical manuals, blueprints, and schematics., • Strong troubleshooting and problem-solving skills., • Basic computer skills for logging maintenance data and communicating with the team., • Physical ability to lift equipment and perform maintenance in various environments., • Boiler Operator License or certification (Blue Seal). Working Conditions • Exposure to heat, steam, noise, and industrial equipment., • May require standing, climbing, and lifting for extended periods., • Availability to work weekends, holidays, and rotating shifts, if necessary.

Job Description SUMMARY: This position is primarily responsible for maintaining and repairing physical structures of buildings, including electrical and plumbing; repairing/replacing appliances; and maintaining grounds by performing the following duties. DUTIES AND RESPONSIBILITIES: • Receives written work orders or verbal instructions from supervisor for completion, • Cuts grass and trims weeds on organization's property., • Digs flower beds and plants flowers., • Constructs decorative flower garden borders from wood., • Cleans internal areas of buildings, including buffing, dusting, sweeping, and mopping., • Maintains the grounds by picking up trash., • Washes windows., • Empties trash cans and consolidates trash for weekly pickup., • Must possess basic knowledge of hand tools., • Paints interior and exterior walls and trim., • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete., • Operates snow removal equipment to maintain parking lots and sidewalks., • Maintains and repairs buildings' plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses., • Repairs or replaces building brick, stone, and concrete., • Maintains and repairs wood parts of buildings., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper, and riding mower., • Assists other departments with moving furniture, appliances and unloading and storing supplies, • If part of on-call rotation, required to respond to all emergency calls onsite within 30 minutes of receiving call., • Performs other related duties as assigned by management. SUPERVISORY RESPONSIBILITIES: • This job has no supervisory responsibilities. QUALIFICATIONS: • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence clearly and informatively., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Must have competent skills using a variety of tools., • Demonstrated ability to plan and prioritize tasks in a self-directed work environment and maintain high levels of productivity without direct supervision., • Detail oriented., • Able to work in a team environment and take direction., • Able to stand and exert fast-paced mobility for entire shift., • Able to maintain balance, lift, bend, kneel, stoop, and wipe COMPETENCIES: • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce., • Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly, • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Responds timely to after hour emergencies when on-call., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. PHYSICAL DEMANDS AND WORK ENVIORNMENT: • Continually required to stand, • Continually required to walk, • Occasionally required to sit, • Continually required to utilize hand and finger dexterity, • Frequently required to climb, balance, • Continually required to bend, stoop, kneel or crawl, • Continually required to talk or hear, • Occasionally required to smell, • Frequently exposed to wet and/or humid conditions (non-weather), • Frequently work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • Frequently exposed to outside weather conditions, • While performing the duties of this job, the noise level in the work environment is usually moderate to loud, • The employee must continually lift and /or move up to 10 pounds; frequently lift and/or move up to 25 pounds; and occasionaly lift and/or move up to 50 pounds and more than 100 pounds, • Specific vision abilities required by this job include: Close vision; Distance vision; Color vision; Peripheral vision; Depth perception and ability to adjust focus

Job Description Boiler & Steam Room Summary We are seeking a dedicated and knowledgeable Utilities Tech to join our facilities team. This role is primarily responsible for the maintenance, operation, and troubleshooting of boiler systems, steam rooms, and related utilities. The ideal candidate will have hands-on experience with industrial boiler systems, steam generation equipment, and a solid understanding of utilities engineering principles. Responsibilities • Operate, monitor, and maintain high- and low-pressure boiler systems and steam room equipment., • Conduct routine inspections and preventive maintenance to ensure safe and efficient system performance., • Troubleshoot and repair equipment issues to minimize downtime and ensure consistent utilities support., • Maintain logs, records, and documentation for compliance with safety and operational standards., • Collaborate with other maintenance staff and departments to support production needs., • Ensure compliance with OSHA, EPA, and other regulatory bodies as applicable., • Assist with utility upgrades, system installations, and equipment modifications as needed., • High School Diploma or GED (required)., • Proven experience working with boiler systems and steam room equipment (minimum 2 years preferred)., • Knowledge of utilities engineering principles, including steam, water, and compressed air systems., • Familiarity with mechanical, electrical, and control systems related to boiler operations., • Ability to read and interpret technical manuals, blueprints, and schematics., • Strong troubleshooting and problem-solving skills., • Basic computer skills for logging maintenance data and communicating with the team., • Physical ability to lift equipment and perform maintenance in various environments., • Exposure to heat, steam, noise, and industrial equipment., • May require standing, climbing, and lifting for extended periods., • Availability to work weekends, holidays, and rotating shifts, if necessary.Industry

Job Description • We have an opening for a full time TECHNICIAN, MAINTENANCE MASTER position., • Location: Mondelez - 200 DeForest Ave, East Hanover, NJ 07936 Note: online applications accepted only., • Schedule: Full Time: Monday-Friday, 7:00 am-3:30 pm, • Requirement: Plumbing, Electrical, HVAC-R, Mechanical experience, • Pay Range: $35.00 per hour to $44.00 per hour ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1452521. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Performs a variety of maintenance duties. Essential Duties and Responsibilities May Include: • Maintains, repairs, cleans and operates the plant, shops, mechanical areas, exterior grounds and campus facilities., • Performs basic maintenance duties and repairs as assigned; contacts supervisors, skilled trade vendors or on-call personnel as instructed., • Updates work statuses, timing, and costs of repairs using a variety of company tech systems., • Provides fleet maintenance support including but not limited to welding, plumbing, electrical, food truck kitchen maintenance, driving of vehicles, on campus fleet troubleshooting support, generator fixes, and general maintenance., • Assists in making decisions on all minor and routine repairs; reports major problems to the supervisor, foreman or journeyman., • Cleans sidewalks and parking areas; picks up and disposes of trash, debris, branches and similar items., • Operates electrical and gasoline-powered equipment., • Maintains equipment; performs minor equipment repairs using power and hand tools., • Performs a variety of other unskilled or semi-skilled tasks such as minor carpentry, plumbing, painting, minor electrical work, lamp changing and drywall maintenance., • Responds to emergency problems in the facility; performs emergency repairs as needed., • Maintains logs, performs rounds and completes maintenance work orders, tests and inspections., • Reads, comprehends and transmits complicated detailed instructions verbally and in writing., • Serves as a member of facility's emergency response team., • Performs other duties as assigned. Qualifications May Include: • One year of related experience as a maintenance worker/technician in a similar-sized institution or in a grounds maintenance occupation., • Valid driver's license. Working Conditions: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job Description We are seeking a highly organized and experienced Warehouse/Shipping Supervisor to oversee the daily operations of our warehouse in Garfield, NJ. This role is responsible for ensuring the efficient fulfillment of orders, as well as receipt and storage of a wide range of goods. The ideal candidate will have strong leadership skills, attention to detail, and the ability to manage people, processes, and systems effectively. Key Responsibilities • Supervise and coordinate the activities of warehouse personnel (e.g., shipping clerks. pickers, packers, receiving and inventory control specialist)., • Monitor workflow, assign daily tasks, and ensure timely and accurate order fulfillment., • Maintain inventory accuracy by conducting regular cycle counts and audits., • Ensure safe and efficient operation of all warehouse equipment., • Enforce safety protocols and ensure OSHA and company compliance., • Oversee receiving and shipping processes to meet customer expectations and deadlines., • Train, evaluate, and coach warehouse staff to promote a high-performance team., • Monitor KPIs and operational metrics (e.g., pick accuracy, fulfillment speed, safety incidents)., • Collaborate with other departments (Purchasing, Customer Service, Transportation) to optimize supply chain efficiency., • Investigate and resolve inventory discrepancies and operational issues., • Lead continuous improvement initiatives for processes, space utilization, and cost reduction.Qualifications, • High school diploma or equivalent required., • Minimum of 5+ years of warehouse or logistics experience, including at least 1 year in a people supervisory or leadership role., • Experience in a fast paced, high volume warehouse., • Proficient in warehouse management systems (WMS) and basic computer skills (Excel, email, inventory software)., • Strong leadership, communication, and interpersonal skills., • Ability to lift up to 50 lbs and stand/walk for extended periods., • Forklift certification

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton NJ Inbound/Internal Transfers Warehouse Operations ManagerAbout the role The ideal candidate will be responsible for managing warehouse operations in our Clifton, NJ location. The Inbound/Internal Transfers Operations Manager will ensure the Clifton facility's inbound and internal transfer processes operate safely, efficiently, and accurately. This role will prioritize workplace safety, oversee inbound freight scheduling, receiving, put away accuracy, internal stock movements, and dock-to-stock cycle times to maintain high service standards and inventory readiness for downstream operations. Responsibilities: • Safety, dock-to-stock Efficiency, inbound inventory accuracy, internal transfer accuracy & timeliness, and people management., • Lead Inbound & Internal Transfers – Serve as the senior leader for all inbound functions (unloading, inspection, put away) and own internal stock transfers between zones/buildings/sister facilities, including scheduling and documentation to keep materials flowing., • People Leadership & Development – Mentor and coach inbound team leaders and supervisors; set clear expectations, create development plans, provide ongoing feedback, and build a high-performance, accountable culture., • Inbound Labor Planning & Productivity – Optimize staffing for inbound peaks and container/truck schedules using forecasts and internal tools; deploy labor to demand, meet productivity KPIs, and address performance gaps quickly., • Operational Excellence & Inventory Accuracy (Dock-to-Stock) – Eliminate receiving-dock bottlenecks by enforcing SOPs and standardized workflows; improve receiving checks, run root-cause analysis on discrepancies, take corrective actions, and process goods within target timelines., • Safety & Compliance – Prioritize a safe inbound work environment through proactive dock safety monitoring, safety training, and adherence to all compliance requirements to minimize incidents and liability., • Cross-Functional Alignment, DC Capacity & Cost Control – Partner with procurement, transportation, replenishment, and outbound to align inbound scheduling and transfers; collaborate on space utilization and peak planning; reduce waste and costs in labor, detention/demurrage, and space usage., • Contribute to team effort by accomplishing related results as needed., • Work in an environment where the noise level varies and can be loud, • Work in an environment where the temperature can be low.(refrigerator temperature at or below 40°ree; F (4°ree; C). The freezer temperature should be 0°ree; F (-18°ree; C), • Able to stand/walk for up to 12 hours during shiftsQualifications, • Bachelor's degree (or equivalent experience), • 10+ years in warehouse or manufacturing operations, • 5+ years in a supervisory or management role, • Experience with Warehouse Management Systems (WMS), • Proficient computer skills (Excel, reporting tools), • Knowledge of health & safety regulations (OSHA), • Experience managing high-volume or fast-paced distribution environments, • Proven track record of leading large teams (50+ associates), • Strong understanding of inventory control and cycle counting processes, • Demonstrated success in reducing labor costs or improving productivity metrics, • Bilingual (Spanish), • Six Sigma (Green Belt), • Food Safety Certification, • OSHA Certification, • Project management certification, • Prior experience in Automated warehouses/manufacturingCompany Benefit, • Comprehensive health insurance package, including medical, dental, and vision, • 401k match, • Bi-annual Performance bonus, • Vacation and holiday time off, • The US base salary range for this full-time position is $92,000 - $108,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job Description: WHY CHOOSE US? Joining The American Red Cross is like nothing else – it’s as much something you feel as something you do. You become a vital part of the world’s largest humanitarian network. Joining a team of welcoming individuals who are exceptional, yet unassuming. Diverse, yet uncompromising in unity. You grow your career within a movement that matters, where success is measured in people helped, communities made whole, and individuals equipped to never stop changing lives and situations for the better. When you choose to be a force for good, you’ll have mentors who empower your growth along a purposeful career path. You align your life’s work with an ongoing mission that’s bigger than all of us. As you care for others, you’re cared for with competitive compensation and benefits. You join a community that respects who you are away from work as much as what you do while at work. WHAT YOU NEED TO KNOW ABOUT THE JOB: The Salesforce System Architect is a strategic technology leader within the Agile Release Train (ART), responsible for defining and evolving the architectural runway across Salesforce and adjacent platforms. This role partners closely with senior business leaders and enterprise architecture to align technology strategy with business outcomes, ensuring scalable, secure, and cost-effective solutions. We are hiring for American Red Cross within our Training Services line of business. The work location for this position is hybrid working 3+ days a week from the American Red Cross office located in Fairfield, New Jersey. This role may be eligible for relocation assistance. WHERE YOUR CAREER IS A FORCE FOR GOOD (Key Responsibilities): • Define and maintain the architectural vision and roadmap for Salesforce and integrated systems., • Collaborate with Product Management, Release Train Engineer, and Business Owners to ensure alignment between business strategy and technical execution., • Guide solution design across teams, ensuring consistency with enterprise architecture and SAFe principles., • Evaluate emerging technologies (e.g., AI, cloud, integration platforms) to enhance business capabilities., • Ensure architectural runway supports near-term features and long-term scalability., • Provide hands-on technical leadership when needed, especially in critical design decisions., • Foster strong relationships with vendors and ensure continuity of operations across platforms. Scope: Individual contributor that works under limited supervision. Apply subject matter knowledge. Capacity to understand specific needs or requirements to apply skills/knowledge. Note: Qualified candidates must be authorized to work in the United States. The American Red Cross does not sponsor employment visas. WHAT YOU NEED TO SUCCEED (required/minimum qualifications): • 10+ years in enterprise technology leadership, including 5+ years managing large-scale Salesforce programs. Strong preference for eCommerce, learning management, product delivery background., • Bachelor's degree in IT, Computer Science, Engineering, or related field; advanced degree preferred., • Deep expertise in Salesforce architecture and development, including Service Cloud and Community/ Experience Cloud., • Strong background in cloud platforms (AWS, Azure, GCP), integration technologies (API, ESB, iPaaS), and data architecture (MDM, BI, Data Warehousing)., • Familiarity with ITIL, service management tools (e.g., EasyVista), and enterprise-grade security and privacy standards., • Strategic thinker with a passion for emerging tech (AI, automation) and its application to business innovation., • Excellent communicator and collaborator, able to influence senior stakeholders and drive consensus. WHAT WILL GIVE YOU A COMPETITIVE EDGE (preferred qualifications): • Preferred: Proven experience as a System Architect in a SAFe Agile environment., • Preferred certifications: Salesforce CTA, System Architect, Application Architect, Platform Developer, Advanced Admin, App Builder, and relevant consultant certs. • Combination of candidate’s education and general experience satisfies requirements so long as the total years equate to description’s minimum education and general experience years combined (Management experience cannot be substituted). +++++++++++++++++++++++++++++ PAY INFORMATION: The annual salary range for this position is $190K - $225K. We do not offer an annual bonus for this role. Note that American Red Cross salaries are aligned to the specific geographic location in which the work is primarily performed. Other factors that may be used to determine your actual salary may include your specific skills, how many years of experience you have and comparison to other employees already in this role. We will review specific salary information at the time of phone screening based upon your location & experience. This job will be posted for a minimum of five business days and extended if the applicant pool needs to be expanded. BENEFITS FOR YOU: As a mission-based organization, we believe our team needs great support to do great work. Our comprehensive package includes: • Medical, Dental Vision plans, • Health Spending Accounts & Flexible Spending Accounts, • PTO: Starting at 19 days a year; based on type of job and tenure, • Holidays: 11 paid holidays comprised of six core holidays and five floating holidays, • 401K with up to 6% match, • Paid Family Leave, • Employee Assistance, • Disability and Insurance: Short + Long Term, • Service Awards and recognition *LI-EH1 IND123 Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit; use hands to handle or feel; and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 15 pounds and occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment will consist of moderate noise (i.e. business office with computers, phones and printers, light traffic). The employee must have the ability to work in a small cubicle and have the ability to sit at a computer terminal for an extended period of time. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be construed as an exhaustive list of responsibilities, duties and skills required of personnel so classified. The American Red Cross is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, San Diego Fair Chance Ordinance, the California Fair Chance Act and any other applicable state and local laws. AmeriCorps, the federal agency that brings people together through service, and its partners — the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance — launched Employers of National Service to connect national service alumni with opportunities in the workforce. American Red Cross is proud to be an ___ partner and share our employment opportunities with the network of organizations. Interested in Volunteering? Visit___ to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: ___ To view the EEOC Summary of Rights, click here:

Job Title: Picker/Packer Job Summary: As a Picker/Packer at Walmart, you will play a critical role in the fulfillment process by accurately selecting and packing merchandise for shipping to customers or Walmart stores. Working in a fast-paced environment, you will use handheld devices and picking equipment to locate, retrieve, and package items according to customer orders or store requirements. Your attention to detail, efficiency, and commitment to quality will ensure that orders are fulfilled accurately and promptly, contributing to Walmart's reputation for exceptional service and customer satisfaction. Key Responsibilities: 1. Order Picking: • Use handheld devices or picking lists to locate and select merchandise from designated storage locations within the warehouse., • Navigate through aisles and storage racks to retrieve items efficiently, ensuring accuracy and completeness of each order., • Verify product details, quantities, and quality before packing to ensure customer satisfaction. 2. Product Packaging: • Pack merchandise securely and appropriately for shipping, using packaging materials such as boxes, bubble wrap, and packing peanuts., • Label packages with shipping information, barcodes, and tracking numbers., • Ensure that packages are sealed properly to prevent damage during transit. 3. Quality Control: • Inspect merchandise for any defects, damages, or discrepancies before packing, and report any issues to supervisors., • Follow quality control procedures to maintain high standards of product quality and customer satisfaction., • Handle fragile or delicate items with care to prevent breakage or damage during packing and shipping. 4. Inventory Management: • Update inventory records in the warehouse management system to reflect items picked and packed for shipment., • Communicate any inventory discrepancies or shortages to supervisors for resolution., • Assist in conducting regular cycle counts and inventory audits to maintain accurate inventory levels. 5. Safety and Compliance: • Adhere to safety protocols and guidelines to prevent accidents and injuries in the warehouse., • Operate picking equipment and machinery safely and responsibly., • Follow company policies and procedures regarding workplace safety, security, and regulatory compliance. 6. Team Collaboration: • Work collaboratively with other warehouse associates and team members to achieve daily picking and packing targets., • Communicate effectively with supervisors and managers to coordinate tasks, resolve issues, and ensure efficient workflow. Qualifications: • High school diploma or equivalent preferred., • Previous experience in warehouse operations, order picking, or packing is advantageous., • Familiarity with handheld devices and warehouse management systems is desirable., • Ability to lift and carry heavy objects (up to 50 pounds) and maneuver bulky items using appropriate equipment., • Strong attention to detail and accuracy in picking and packing merchandise., • Excellent organizational and time management skills., • Ability to work independently and as part of a team in a fast-paced environment. Physical Requirements: • Ability to lift and carry heavy objects (up to 50 pounds) and maneuver bulky items using appropriate equipment., • Physical agility to bend, stoop, reach, and stand for extended periods. Working Conditions: • Warehouse environment with exposure to varying temperatures and noise levels., • Use of warehouse equipment and machinery, including picking devices and packing stations., • Interaction with team members, supervisors, and delivery personnel throughout the shift. Conclusion: As a Picker/Packer at Walmart, you will play a key role in ensuring the accurate and efficient fulfillment of customer orders. Your contributions will directly impact the speed and accuracy of order processing, ultimately enhancing the customer experience. If you are detail-oriented, physically capable, and thrive in a fast-paced work environment, this position offers a rewarding opportunity to be part of the Walmart team.

Job Title: Safety Coordinator Location: Paterson, NJ Employment Type: Full Time Job Summary: We are seeking a proactive and detail-oriented Safety Coordinator to join our team at our food manufacturing facility in Paterson, NJ. This role is responsible for promoting a safe working environment by developing, implementing, and monitoring health and safety programs that comply with OSHA, FDA, USDA, and other regulatory standards. The ideal candidate will have experience in a manufacturing setting, strong communication skills, and a hands-on approach to safety culture improvement. Key Responsibilities: • Monitor daily operations to ensure compliance with company safety policies and government regulations (OSHA, FDA, USDA, etc.)., • Conduct regular safety audits, inspections, and risk assessments throughout the plant., • Assist in developing and updating safety procedures, manuals, and training materials specific to food manufacturing operations., • Lead and participate in incident investigations, root cause analyses, and the development of corrective actions., • Maintain accurate records of incidents, inspections, trainings, and compliance reports., • Coordinate and conduct employee safety training programs, including new hire orientation and annual refresher courses., • Support the implementation of Food Safety Programs (GMPs, HACCP) from a workplace safety perspective., • Serve as the liaison for internal teams and regulatory agencies during safety inspections or audits., • Track and manage PPE inventory and ensure proper usage across all departments., • Promote a culture of continuous improvement and employee involvement in workplace safety initiatives. Qualifications: • 2+ years of safety experience in a manufacturing environment; food manufacturing experience preferred., • Working knowledge of OSHA regulations; familiarity with FDA and USDA compliance is a plus., • Strong understanding of hazard identification, job hazard analysis, and incident investigation procedures., • Excellent written and verbal communication skills., • Proficient in Microsoft Office (Word, Excel, PowerPoint); experience with safety management systems is a plus., • Ability to work independently and collaboratively in a fast-paced production environment., • Ability to speak Spanish is a plus Physical Requirements: • Ability to walk for extended periods in a manufacturing environment., • May require occasional lifting (up to 50 lbs), bending, and working in hot or cold environments., • Ability to wear required PPE and adhere to hygiene and food safety protocols., • Plant work may involve exposure to cold, heat, loud noise, moving machinery, heights, dust, mist, gas, fumes, and frequent walking or climbing

Warehouse environment with exposure to varying temperatures and noise levels. As an Order Picker at Walmart, you will play a crucial role in fulfilling customer orders and maintaining optimal inventory levels within the warehouse. Use of warehouse equipment and machinery, including picking devices a

Job Description JANITOR - Montclair State University Ice Arena Sports Facilities Management, LLC LOCATION: Little Falls, NJ DEPARTMENT: MAINTENANCE REPORTS TO: OPERATIONS MANAGER STATUS: FULL-TIME (NON-EXEMPT) ABOUT THE COMPANY: Montclair State University Ice Arena is a premier sport, recreation and entertainment destination focused on improving the health and economic vitality of Little Fall, NJ You will be joining a championship level team focused on fun, fulfillment and service built to enrich the community as well as your career and personal growth. Montclair State University Ice Arena is managed by Sports Facilities Management, LLC (SFM), a Sports Facilities Companies (SFC) Organization. SFC is the nation's leading resource for managing and developing sports, recreation, wellness, and events facilities. We provide a highly collaborative and supportive culture that raises our team members to new levels of career growth. Together, we will carve a path in a hyper-growing industry where you will enjoy the journey and learn from the industry's best while having some fun. SFC was awarded national recognition as a Top Workplace and is considered a workplace of choice. Our mission-focused company is highly entrepreneurial, team-oriented with a culture centered on collaboration, accountability, excellence, and service. We are growing rapidly and looking for high performers at every level to grow with us. POSITION SUMMARY: The Janitor role will be responsible for the cleaning and sanitizing of public areas, meeting rooms, and bathrooms. PRIMARY RESPONSIBILITIES WILL INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING: • Performs general clean-up of all areas of the building as directed, • Monitors for spills throughout the facility and clean as needed, • Cleans all floor surfaces and glass in facility, • Cleans and maintain all bathrooms (toilets, sinks, floors, restock supplies, etc.), • Cleans all guest seating and lobby area, • Facility trash & recycles removal, • Complete special projects, daily assignments and other duties as directed by management, • Provide courteous and friendly service to all guests provide answers and directions as needed, • Complete non-routine cleaning according to specified job orders, • Remove garbage and recycling daily and prepare bins for weekly pick-up, • Housekeeping/janitorial/porter experience preferred, • High school diploma/GED required or working towards it, • Willingness to work a variety of shifts, • Ability to work well under minimal supervision, • Capacity to take direction and follow through, • Strong attention to detail, • Physically capable of lifting and moving objects up to 50 pounds as necessary, • May be required to sit or stand for extended periods of time whether indoors or outdoors, and squat, stoop, or bend, • Ability to navigate around the facility for long periods of time, • Facility has intermittent noise Job Posted by ApplicantPro

Job DescriptionJoin the Team at PROSTAR Staffing! We’ve partnered with a well-established pharmaceutical packaging warehouse in Whippany, NJ, and they’re looking for motivated warehouse packers to join their team! Is that you? Key Responsibilities: • Ensure a safe and clean work environment at all times., • Adhere to all safety procedures and regulations., • Accurately weigh and label packages., • Inspect packages to ensure they are undamaged., • Organize and store items in designated areas., • Schedule: Monday to Friday, 11:00 PM – 7:15 AM, • Fast-paced production/plant environment #ZIP

Job Description Manual Machinist **Overview SKILLS/EXPERIENCE: **- 5+ years of related experience involving set-up/operation of precision (high tolerance), machine shop equipment (Aerospace mfg. environment preferred) * High School/(GED) Diploma or Vocational/Technical school equivalent * Self-motivated individual who possesses the ability to analyze, organize, plan, multi-task and achieve results through effective interaction with others * Possess math skills required to effectively and efficiently read, interpret documents (i.e., blueprints/technical drawings, operation/tool/set-up sheets, procedures, ECN’s, routers, etc.). Ability to interpret various types of graphs and data used in problem solving, SPC, monitoring of performance metrics, etc. * Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel within the organization * Ability to set-up and operate machine shop equipment in a effective, efficient, safe and consistent manner * Knowledgeable in the areas of Lean Manufacturing concepts, employee training, GT&D practices, interpretation of machine shop documentation (blueprints, ECN’s, operation/tooling sheets, routers, etc.), inspection methods, effective utilization of measuring equipment/instruments, root cause investigations, troubleshooting, and performance metrics * Consistently demonstrate commitment to company values, strategic plan and vision * Must demonstrate creative thinking as it relates to machine shop, inspection and assembly and test fixture manufacture and design input. * Must be a US Citizen **Additional Duties / Responsibilities :**- Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required). * Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements. * Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization * Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals * Assist in the training of personnel to perform required technical tasks (as directed) * Consistently demonstrate commitment to company values * Keep management informed of area activities and of any significant problems. * Assume responsibility for related duties as required or assigned. * Ensure that work area is clean, secure, and well maintained. * Complete special projects and miscellaneous assignments as required. **Work Environment :**- While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • This is a full-time position;, • Overtime and weekend work may be required, as job duties demand. :**- While performing the duties of this job, the employee is regularly required to talk and hear. • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility. You should be proficient in: • Troubleshooting Skills, • Manual Machining Skills

Job Description RF Field Engineer Location: Clifton, NJ C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C2 Systems is currently seeking a Radio Frequency (RF)/Field Engineer to join our team. If you are highly motivated and have the ability to work in a fast paced environment, this may be the role for you. You will be interacting with customers and co-workers on a daily basis and providing timely and detailed updates. This position will require you to be in the field 90% of the time. Primary Responsibilities: • Takes the lead on system commissioning, integrations, and activations, • Performs system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment, • Performs site surveys and in-depth walkthroughs, • Works (hands on) with system components such as antennas, fiber optics, coax, and RF amplifiers, • Troubleshoots and repairs systems for optimal performance, • Application of RF principles/theory (signal path, power, frequency, noise, modulations, etc.), • Multi-tasks on projects on a day-to-day basis, • Maintains test equipment and tools for continuous use, • Travels to various job sites within Maryland and outlying regions (DC, Northern Virginia, Pennsylvania and Delaware) Skills/Qualifications: • 2 year college degree (preferably technical) with relevant coursework, • 2+ years of related experience preferred (previous experience with DAS architecture and other cellular systems), • Knowledge of various wireless technologies (CDMA, WCDMA, GSM, LTE, etc.), • Possess strong technical aptitude and the desire to learn and advance within a technical field, • Comfortable working in high pressure situations, • Ability to receive and give direction on an as needed basis, • Knowledge of RF optimization techniques and best practices, • Proficient in basic computer applications (MS Office, etc.), • Must have a valid driver’s license with reliable transportation In addition, you should have the following characteristics: • Self-motivated and have the ability to work effectively under minimal supervision and direction, • Ability to work in groups, • Passion for learning new technologies, • Ability to work in a fast-paced environment, • Strong written and verbal English communication skills

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices. Our practices are led by top-tier dentists committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and fostering a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will support the clinical needs of patients and doctors. Responsibilities include patient care, recordkeeping, and appointment coordination. You will work under the supervision of dentists and closely with dental hygienists in daily clinical operations. Duties and Responsibilities The duties include, but are not limited to: * Demonstrate knowledge of dental instruments and assist the dentist chairside during patient care. * Maintain inventory control in treatment areas. * Adhere to OSHA, HIPAA, and CDC guidelines. * Provide excellent patient interactions regarding scheduling, follow-up care, post-surgical instructions, and documentation. * Perform basic lab procedures such as taking impressions, pouring models, and preparing cases for external labs. * Perform other job-related duties as assigned. Qualifications * High school diploma or GED required. * Quick to learn new technologies and systems; eagerness to grow professionally. * Applicable licensing required depending on the state of employment. * 1+ years of experience as a Dental Assistant preferred. * Ability to work in a fast-paced environment. * Flexibility to work evenings and weekends as needed. * X-ray license required. Knowledge and Skills/Expected Competencies * Familiarity with dental instruments and patient care practices. * Clear communication skills for conveying clinical information. * Strong organizational, time management, and prioritization skills. * Ability to manage multiple tasks and deadlines efficiently. Benefits We value the dedication of our team and offer a comprehensive benefits package including: * PPE provided at or above industry standards * Competitive pay * Health and dental insurance * Dental discounts * Paid time off and holidays * 401(k) retirement plan * Opportunities for professional growth * Continuing education * Flexible scheduling * Training and development support Physical/Mental Demands and Work Environment This position requires the ability to stand and walk regularly, use hands and arms to operate equipment, and occasionally lift up to 25 pounds. Vision requirements include close vision and focus adjustment. The role may involve travel to clinical locations. The work environment is typically low to moderate in noise level. ProSmile reserves the right to modify the job description as needed and may require additional duties beyond those listed. This description does not constitute a contract of employment. Equal Employment Opportunity We foster a culture of inclusion, personal development, and innovation. ProSmile is an Equal Opportunity Employer and encourages applications from diverse backgrounds, including individuals from underrepresented communities and those with non-traditional educational or career paths. Company Safety Commitment ProSmile prioritizes safety for all staff and patients. All employees are required to follow CDC safety standards and wear appropriate Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more, as needed. Company DescriptionProSmile is a leading multi-specialty dental services organization with a network of more than 1,800 premier healthcare professionals serving patients in more than 80 locations throughout the mid-Atlantic & mid-West regions of the U.S. ProSmile’s practices offer a range of services from basic exams and cleanings to specialty services, including pediatrics, endodontics, periodontics, orthodontics, and oral surgery.ProSmile is a leading multi-specialty dental services organization with a network of more than 1,800 premier healthcare professionals serving patients in more than 80 locations throughout the mid-Atlantic & mid-West regions of the U.S. ProSmile’s practices offer a range of services from basic exams and cleanings to specialty services, including pediatrics, endodontics, periodontics, orthodontics, and oral surgery.

Job Description WHAT THE ROLE DELIVERS: The Director of Quality is responsible for ensuring excellent quality practices across 3 Roehm Business Units in Region Americas. This includes overseeing the development, implementation, and control of quality standards, methodologies, and metrics. The role involves providing clear leadership to uphold high quality standards and fostering a culture of quality excellence. The Director of Quality also leads the continuous improvement program, collaborating with various levels of management and employees. Additionally, the role involves managing compliance with ISO, RC, and IATF standards and documentation. WHAT YOU WILL DO • Implement global BU-specific Quality strategies in alignment regional interface functions., • Develop and implement a regional quality strategy aligned with current business strategies., • Continuously work on the reduction of cost of poor quality with the right initiatives globally for the Business units., • Collaborate closely with Operations and site managers and enforce globally determined quality standards and methods., • Execute and support internal audits (as Lead Auditor where required), ensure corrective and preventive actions are implemented., • Ensure compliance with complaints management processes and drive resolution, ensuring data consistency within relevant systems (e.g., SAP-QM)., • Ensure compliance with quality requirements set by customers, company, and regulatory agencies., • Lead and manage various quality projects, establishing universally applied standards., • Develop and manage quality KPIs for each business function and review ongoing performance., • Act as the Parsippany site ESHQ representative, overseeing internal audits, incident investigations, and participating in the regional ESHQ network., • Update and modify in-house systems to meet external certification body needs as outlined in the Global QM System., • Foster effective communication and knowledge sharing with Roehm RAM locations and global ESHQ personnel., • Report monthly against agreed quality metrics to the Regional Management Team (RMT)., • Responsible to actively work on the improvement of BU quality performance. Leads the Quality Referent Americas Functional responsibilities & required skills: • Ensure customer-centric quality processes through the implementation of best practices., • Support continuous improvement initiatives and the implementation of Quality performance improvements at regional level., • Maintain and enforce quality-related processes in alignment with the global BU’s guidelines (e.g., work instructions, standards, management system updates)., • Ensure proper execution of quality test methods and equipment harmonization as directed by global BU Quality Managers., • Conduct root cause analysis for quality complaints and champion the concept within the business., • Lead ‘correct at source’ and problem-solving initiates., • Establish universally applied quality standards and drive continuous improvement., • Manage the Roehm America Intellaquest document management system. Leadership responsibilities & required skills: • Manage and develop the Quality Specialist role in Region America., • Cultivate an organizational culture focused on quality excellence, providing clear leadership in its development., • Promotes a culture of Quality excellence (i.e. problems/issue detection and corresponding solution definition and implementation) fostering collaboration across departments and continuous improvement initiatives., • Track and document corrective and preventive actions resulting from audit findings and oversee their execution., • Other duties as assigned by manager., • Communicates with personnel at all levels, internally and externally in relation to quality matters., • The incumbent interfaces with all regional BU Heads and Plant Site Management and Global Quality Management Teams., • This position also interfaces with corporate and service functions like procurement, financial services, IT, and ESHQ to ensure that agreed quality standards are considered and implemented., • Works collaboratively, negotiates and engages with key stakeholders to facilitate delivery and compliance with quality strategy, • Develops and maintains strong relationships with internal and external stakeholders to achieve organization’s quality targets., • Works with regional Roehm management team to share ideas and improve operations, recommending, supporting and implementing continuous improvement activities in line with company and customer requirements., • Works with global Head of ESHQ Management and global SCB team to develop and implement global quality projects and initiatives., • Works with customer to incorporate customer needs and requirements into the quality processes and quality KPI & performance management concept. WHAT WE ARE SEEKING • Minimum of a Bachelor's Degree in Science or Engineering or related discipline required, MBA preferred, • 6 Sigma/LEAN Certified – preferred, • 7 + years’ experience in the areas of Quality Management Systems and Continuous Improvement Process, • Experience in the chemical, plastics, or manufacturing fields desired. Quality certification(s) preferred., • Experience in implementing, managing, and maintaining ISO compliance is required, experience in implementing, managing, and maintaining IATF 16949 compliance is preferred., • Excellent written, verbal and presentation skills., • Proficient in Microsoft Office Suite: Outlook, Excel/Pivot Tables, PowerPoint and Word, • Experience in SAP preferred., • QM systems (e.g., IQ, SAP, LIMS), project mgmt., Lead Auditor, Lean Six Sigma, data analysis & reporting, • Ability to travel domestically and internationally to manufacturing sites and other facilities up to 50%. PHYSICAL DEMANDS & WORKING CONDITIONS • Hazardous Exposures: hazardous materials, loud noise, extreme heat or cold, • Physical Lifting Requirements and frequency: sedentary (up to 10 pounds), light (up to 20 pounds), medium (up to 50 pounds), heavy (over 50 pounds), • Other Physical Requirements and frequency: occasional (up to 1 hr/day), regular (up to 3 hrs/day), frequent (over 3 hrs/day), • Climbing, • Walking, • Standing, • Stooping/Kneeling lRhnBc1pKk

Job DescriptionBenefits: • Referral program, • 401(k), • Bonus based on performance, • Company parties, • Employee discounts, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Paid time off, • Competitive massage rate when booked, • Gratuity, commission and potential bonus, • Steady clientele, • Healthcare benefits for full-time employees, • Paid continuing education credits for full-time employees, • $100 Annual Self Care reimbursement, • Earned PTO, • Product discounts, • Flexible scheduling, • No mandatory sales goals or scripts; focus on your craft and guest's needs, • All service supplies and wardrobe requirements are provided, • Top-of-the-line hydraulic massage tables and all new equipment, • Inspiring, calming work environment for both clients and therapists, • Strong teamwork ethic with an emphasis on massage therapist support, • A positive and supportive team with a present general manager and engaged owners, • Off-site events and team building opportunities, • Celebratory lunchesSchedule / Expected Work Hours:, • Ability to work flexible hours, including evenings, weekends and holidays, • Availability for at least one PM and one-weekend shiftResponsibilities:, • Share the healing power of touch to inspire and transform through the benefits of massage therapy., • Provide therapeutic massage through a variety of modalities (Prenatal, Sports, Stretching Techniques, etc.), • Ensure the service room, equipment, and tools are kept clean and in compliance with established licensure standards. All required supplies are provided., • Full and Part-Time positions available., • Weekend availability is requiredteam members must be available to work either Saturday or Sunday, including both day and evening shifts., • Weekend, Holidays, Day shift, Night shift, • Will consider qualified candidates beginning their careers in massage therapy who possess the right qualities and demonstrate an innate talent for and understanding of therapeutic massage.Qualifications:, • Desire to be part of a team that has an infectious passion for health and wellness., • License/certification required in state of practice. Must present New Jersey license during the interview process and maintain original license throughout employment if hired., • Knowledge of Swedish and Deep Tissue Massage and other modalities., • Availability during prime earning potential periods including nights, weekends, and holidays., • Must be able to stand and exert well-paced mobility for up to 6 hours in length. Length of time of these tasks may vary from day to day and task to task., • Should be able to bend, stoop, squat, and stretch to fulfill room resetting tasks and all massage service protocols. Requires grasping, standing, sitting, walking, repetitive motions, bending, climbing, listening, and hearing ability and visual acuity. Company Purpose/Mission: Self-Care is Essential The NOW is designed as a refuge to help you disconnect from the outside world and reconnect within. We are where you go to turn down the noise so you can listen to what your body needs. We say show up for yourself so you can better support others. Relax your body. Reset your soul. Start NOW. We design our services to be convenient, affordable, and high-quality always. The menu of customizable enhancements makes personalizing your service simple. Our interiors are recognized for their elevated aesthetic, inspired by exotic destinations from around the world. Company Values: Brand Truths LIVE IN THE NOW Be Present. Take time to recharge and reconnect within. KINDNESS IS MAGIC Positive energy always. Create a circle of warmth and compassion from welcoming guests to giving back to your community. CARE FOR THOSE WHO CARE FOR OTHERS Foster an environment where team members feel valued, recognized, and rewarded. AUTHENTICITY ALWAYS Open and transparent communication with our inner circle and guests.

Job DescriptionService Manager - Essex County, NJ ABOUT HONEYGROWhoneygrow is a thriving Philadelphia-based fast-casual restaurant with a growing number of locations in the mid-Atlantic and northeast regions. Founded on the principles of bringing people together over quality, wholesome, and simple foods, honeygrow remains committed to its roots. Yet it's our key ingredient – our team – that truly propels and differentiates us in becoming a sustaining, great brand. We believe that our team members are the heart and soul of honeygrow, driving our success and embodying our core values of grit, pride, compassion, and focus. At honeygrow, creating and building a distinctive brand is in our DNA. As a company on the cusp of substantial growth, we are looking for like-minded individuals who share our passion and values to join us in shaping the future of honeygrow. We invite you to be a part of our story and contribute to our journey as we continue to redefine the fast-casual dining experience. honeygrow’s success depends on our people. Our restaurants can only prosper and provide opportunities for employment and growth when we continually improve ourselves, and the work we do. We believe that a commitment to uncompromising values and integrity should always support our decisions and actions as we pursue our goals. The following Core Values will guide our team as we move forward: • Work hard at work worth doing, • Your work directly betters people’s lives and happiness, • Enlighten each other to enlighten our guests, • Always be learning, always be improving, • Be mindful of your surroundings, • Exceed expectationsBENEFITS:, • Paid Time Off: Enjoy earned paid time off and one week of sick time granted annually., • Holiday Closures: Closed on Thanksgiving, Christmas, New Year’s Day, Memorial Day, Fourth of July, and Labor Day., • Financial Wellness: 401(k) with company match and free financial wellness counseling, • Insurance: Medical, Dental, Vision, FSA, Commuter Benefits, and Pet Insurance for qualifying employees., • Rewards: Achieve your work goals and get gift cards to popular retailers., • Wellness, Perks, & Discounts: Health resources and exclusive savings on entertainment, shopping, and hotels., • Meal Benefits: Free shift meals and discounts on meals and drinks on your days off., • Competitive Pay: Earn competitive wages plus tips, with instant access to your earnings via DailyPay., • Performance Reviews: Annual performance reviews with merit increases for qualifying employees., • Referral Bonus: Earn up to $500 for referring a friend., • Anniversary Gifts: Celebrate your work anniversaries with special gifts., • Career Growth: Opportunities for advancement and training in culinary and hospitality.ROLES + RESPONSIBILITIES:, • Lead honeygrow restaurant operations through understanding and enforcing all policies, procedures, standards, training programs, and cultural points., • Strive to be a honeygrow top performer, someone who has the desire and ability to perform excellent work, and whose constant effort elevates them, their team and honeygrow., • Support the General Manager in teaching the team how to be top performers empowered to achieve hg Standards., • Demonstrate integrity, honesty, knowledge, and the ability to exceed expectations of guests and team members alike while promoting the culture, values, and mission of honeygrow., • Fully comprehend and be able to perform every station in the restaurant and be trained on all functions through the Service Manager level., • Oversee cash management, nightly report packaging, and all other administrative work relative to daily operations., • Actively train, coach, and develop all employees with patience and diligence., • Ensure that we deliver a fantastic guest experience executing our hg Engine efficiently with every guest on every shift. Our hg Engine is comprised of speed, accuracy, cleanliness, superior product, and hospitality., • Ensure that we follow all the food safety guidelines and procedures., • Effectively supervise scheduled shifts., • Uphold the restaurant to hg facilities standards and lead the restaurant’s preventative maintenance plan., • Complete facilities and food safety processes, including but not limited to completion of opening/closing checklists, line checks, and daily/weekly cleaning checklists.REQUIREMENTS:, • Must be at least 18 years of age., • Must be able to meet the scheduling needs of the restaurant., • Strong food prep experience., • ServSafe Certification preferred., • Previous training experience preferred., • Minimum one year of restaurant experience.PHYSICAL REQUIREMENTS:, • Must be able to stand and walk for extended periods., • Must be able to lift and carry up to 50 pounds., • Must possess close vision, distance vision, and peripheral vision., • Must be able to frequently bend, stoop, and reach., • Must have dexterity to handle kitchen equipment., • Must be comfortable working near open flames., • Must be able to work in a fast-paced environment with hot and cold areas., • Must be able to work in tight spaces. The estimated range is the budgeted amount for this position. Final offers are based on various factors, including skill set, experience, location, qualifications and other job-related reasons.

Job DescriptionJob Title: Orthodontic Registered Dental Assistant Department: Operations FLSA Status: Non-Exempt Direct Reports: Operations Manager Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary We are seeking a skilled Orthodontic Registered Dental Assistant (RDA) to join our dynamic dental practice. The ideal candidate will provide exceptional patient care and support our orthodontic team in delivering high-quality orthodontic services. The Ortho RDA will assist the orthodontist during patient procedures, perform orthodontic procedures under the direction of the orthodontist, and ensure a comfortable and positive experience for our patients. Duties and Responsibilities The duties include, but are not limited to: • Assist the orthodontist during orthodontic procedures, including but not limited to, braces adjustments, wire changes, and placement of orthodontic appliances., • Prepare treatment rooms and equipment for orthodontic procedures., • Take and develop dental radiographs (X-rays) as directed by the orthodontist., • Take Orthodontic records, • Fabricate retainers, • Educate patients on proper orthodontic care and oral hygiene techniques., • Maintain accurate patient records and documentation., • Sterilize and maintain dental instruments and equipment., • Provide support to the orthodontic team as needed., • Valid Registered Dental Assistant (RDA) license., • Completion of an accredited dental assisting program., • Previous experience in orthodontic assisting preferred., • Proficiency in taking dental radiographs (X-rays)., • Excellent communication and interpersonal skills., • Ability to work effectively in a fast-paced environment., • Strong attention to detail and organizational skills., • Commitment to providing exceptional patient care., • Ability to work well within a team., • X-ray License required, • Current NJ Registered Dental Assistant license, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required, • Certified Dental Assistant certificate, • 1+ years work experience as a Dental Assistant, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • Active CPR Certification is required., • Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR 3fQWRSt3H5

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in civil engineering with a minimum of 3-5 years of field or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Professional Engineer (PE) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • Trains research assistants and graduate students, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Preparation of proposal estimates of time and expenses required to complete project. Qualifications: • Bachelor’s degree in related field, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license preferred., • 40-hour OSHA HAZWOPER certification, • Licensed Site Remediation Professional (LSRP) license preferred, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $100,000–$140,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in related field with a minimum of 3-5 years of field or related experience where a LSRP license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $85,000–$115,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference—apply today!CNC Machinist - Turning OverviewThis position’s primary responsibility is to set-up and operate a variety of CNC Turning Centers including but not limited to: single and dual spindle, single and dual turret, Swiss type, gang tool, and conversation control machines to produce high quality – close tolerance products in a safe, effective/efficient manner to meet operational requirements. The candidate’s expertise will be applied in a proactive manner utilizing best practices when conducting documentation review, troubleshooting, continuous improvement, equipment set-up/operation and component inspection related activities.The incumbent must be an individual who can multi-task and perform various machine shop related activities which are to be conducted in a manner that complies with company requirements (i.e., regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people within the organization to successfully support operations and the corporate strategic vision.SKILLS/EXPERIENCE:5+ years of related experience involving set-up and operation of precision CNC Turning Centers in an effective, efficient, safe and consistent manner (Aerospace mfg. environment preferred).High School/(GED) Diploma or Vocational/Technical school equivalentSelf-motivated individual who possesses the ability to analyze, organize, plan, multi-task and achieve results through effective interaction with others.Possess math skills required to effectively and efficiently read, interpret documents (i.e., blueprints/technical drawings, operation/tool/set-up sheets, procedures, ECN’s, routers, etc.).Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel within the organization.Knowledgeable in GT&D practices, inspection methods, effective utilization of measuring equipment/instruments, root cause investigations, troubleshooting, and performance metrics. Consistently demonstrate commitment to company values, strategic plan and visionMust demonstrate creative thinking as it relates to machine shop processes. Must be a US CitizenAdditional Duties / Responsibilities:Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements. Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organizationActively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goalsAssist in the training of personnel to perform required technical tasks (as directed)Consistently demonstrate commitment to company valuesKeep management informed of area activities and of any significant problems.Assume responsibility for related duties as required or assigned.Ensure that work area is clean, secure, and well maintained.Complete special projects and miscellaneous assignments as required.Work Environment:While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibrationThis job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).Temperature of work environment may be affected by outside/external temperatures, machining processes, etc.Overtime and weekend work may be required, as job duties demand.No travel is expected for this positionPhysical Requirements:While performing the duties of this job, the employee is regularly required to talk and hear.The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feelSpecific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility.The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs.This position is at our Montville, NJ corporate offices location.Pay Range: $26.00-34.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts.At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed.Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency.Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture.If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at ARE ENCOURAGED TO APPLYNo agencies, please. | | | | You should be proficient in: • CNC Tooling, • CNC Programming, • CNC Machine Repair, • CNC Machine Installation

Job Description Job Title: Orthodontic Treatment Plan Coordinator Department: Operations Reports To: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary Coordinating communications with patients and parents to ensure a commitment to dental treatment plans. Adept at establishing effective relationships between doctors staff members and patients. Committed to clearly presenting treatment options. Duties and Responsibilities The duties include, but are not limited to: • Provide patients and parents with detailed information on dental financing options., • Respond to all patient and parent inquiries in a timely courteous manner., • Follow up with missed appointment letters, • Provide patients with a thorough explanation of the orthodontic procedures., • Maintain strong relationships with all patients and dental staff., • Discuss follow-up procedures with patients, • Maintain inventory of dental supplies and reorder as necessary., • Convince patients to commit to follow-up treatments., • Address any billing and insurance issues in a timely manner., • Address patient concerns and grievances in a timely manner., • Greet patients and answer any immediate questions., • Contact patients with appointment reminders., • Verify and update all patient demographic data, • Collect all insurance information from patient / parent, • Verify Insurance Benefits, • Verify both, insurance, and patient payments, are up to date., • Follow up with unpaid insurance, • Promote in office marketing items, • Gather and submit claims and documents required by Insurance companies, • Set up patient account in auto pay system (OrthoBanc), • Perform hard credit inquiries and set up financing (Care Credit), • Ensure office profitability by building productive schedules, • Follow up with patients’ Recall visits, • Enter transactions and post payments, • Review Provider’s schedule and charts (if applicable), • Ensure accuracy of accounts (set up properly / Guarantor / FRP in account /correct provider & clinic), • Collect signatures on contracts and consent forms, • Ensure lab cases are both sent to the lab and follow up for lab cases returned from lab, • Prepare accounts for Debond (retention agreements, termination waivers, reconcile final balances), • Ability to travel daily, by personal car, to multiple dental practices and corporate office, • Ensure that the provider will reach Goal production, • High school degree or GED required, • Substantial familiarity with Ortho treatments and procedures, • Strong knowledge of financing options and dental payment processing, • Proficient in the use of MS Office software applications, • Remarkable understanding of dental insurance claims, • Excellent interpersonal skills and communications abilities, • Impressive ability to efficiently manage multiple tasks Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR oyN9Ptssn3

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. Applies engineering or applicable education and participates in civil, geotechnical, and environmental projects such as construction of buildings, dams, roadways, and other types of construction to expand industry skills and knowledge. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Assists in the conduct of civil, environmental, and geotechnical engineering related services, • Performs tasks to make Staff Engineer/Associates more efficient, • Assists with inspection of compacted fills, utilities, asphalt, concrete, sitework elements, • Experiments with new growth strategies and ideas to develop technical skills, • Conducts geotechnical engineering laboratory tests, • Prepares samples of materials for laboratory testing, • Performs research and data entry, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Must have strong attention to detail with excellent analytical and willing to spend the majority of work hours in the field., • BS in Civil Engineering or related field with a Minimum cumulative GPA 3.0., • Excellent written and verbal communication skills., • Valid Driver's License and possess reliable transportation to access job sites., • Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Able to apply concepts of basic algebra and geometry., • Proficient or familiarity with AutoCAD, NitroPro, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Hourly Rate: $17/hr. -$21/hr., + overtime & mileage reimbursement.

Job Description Job Title: Dental Assistant w/ X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR w0ex38NrfM

Job Description Job Summary: Montclair Breast Center, a member of Genesis Health, is dedicated to saving lives through proactive healthcare. Our patients enjoy the unique experience of state-of-the-art, personalized care linked seamlessly to the latest screening, diagnostic and preventive technologies. MBC is seeking a mammography tech, responsible for detecting breast tissue abnormalities by completing mammographic imaging studies; presenting them for diagnosis. Essential Functions: • Minimizes radiation to patient and staff by practicing radiation protection techniques. adjustments for optimum results; retaking mammograms as required; forwarding completed studies to radiologist for interpretation. inventories. • Maintains safe, secure, and healthy work environment by following, and enforcing standards and procedures., • Documents patient mammogram services by completing patient record charting., • Quality Assurance- daily, monthly test on mammo stereo bone density., • Making CO’s + downloading., • Risk Assessment on all patients., • Also see attached Flat Field Digital QC Tests 2000DS, Flat Field Digital QC Test Essential, and QA Assurance Policy. Qualifications: • Current State License and ARRT registry, • Specialized training in mammography (continuing education/certificates), • Continuing education- this requirement specifies that an average of 5 ECE’s/year be specific to mammography), • Continuing experience in mammography (effective 4/1999), • High school graduate or equivalent, • Current BLS- Preferred, • Technologists (ARRT) and/or Certified Radiologic Technologist (CRT) Certified sonographer., • Mammographic Radiologic Technology certified., • Able to operate sophisticated computer equipment, • Strong interest in scientific and technical skill and knowledge, • Able to interact compassionately and effectively with the sick or injured, • Able to communicate effectively, • Able to perform well independently, • Able to follow detailed instructions, • Exact and precise, • Highly self-motivated Lifting Requirements Heavy lifting: up to 100 lbs. maximum with frequent lifting and/or carrying objects weighing up to 50lbs. Must be able to stand, stoop and lift and walk without restrictions Workplace Conditions: Workplace Environment Conditions • Medical office environment, • The noise level in this workplace is mild to moderate Visit us at MBC is part of Genesis Health and Genesis Global Group and is an equal opportunity employer. Company DescriptionGenesis Global Group is a privately held collection of vertically integrated domestic and international companies that delivers deep expertise, objective solutions, customized products and unparalleled service spanning the sectors of biotechnology, health care, manufacturing, real estate, and hospitality.Genesis Global Group is a privately held collection of vertically integrated domestic and international companies that delivers deep expertise, objective solutions, customized products and unparalleled service spanning the sectors of biotechnology, health care, manufacturing, real estate, and hospitality.

Job Description About the Job The primary function of this position is to oversee a full portfolio of approved and unapproved ANDA products. The incumbent might also be designated as U.S. Agent (back-up) for the U.S. Office for both ANDAs (GPI USA) and API (GLS India). The position includes a number of responsibilities that will require excellent communication to support both internal and external customers (globally) including the U.S. FDA. Job Responsibilities Note: These statements are not intended to be an exhaustive list of all responsibilities and duties. • Manage at least one (1) and possibly up to (2) direct reports to ensure their assigned responsibilities are completed accurately and on a timely basis to support the needs of the business for internal/external customers., • Support the U.S. Office for more than 170 approved ANDAs and all unapproved (under review ANDAs) as U.S. Agent back-up for all Glenmark subsidiaries including GPL, GSSA, GPI and GLS. The successful candidate will need to be able to review and sign various submissions to FDA. It will include ANDA cover letter, Form 356H for Original ANDAs, Amendments to ANDAs and/or Supplements to post-approval work. Form 2252 for Annual Reports., • Provide support/RA strategy needed to achieve timely approvals with the Agency., • Update the internal tracker that records all incoming and outgoing regulatory activities/communications for ANDAs/OTCs which may include submissions to FDA and Corresponding Acknowledgements, ANDA Amendments and Responses to CRL (minor/major), DRLs and IRs. The US Office is responsible to communicate these updates to the identified Sr. Management on a timely basis including R&D for unapproved products, RA India including post-approval team for post-approval activities. The email list is provided for such communications which includes Commercial Division Heads, R&D, QA, Legal, Business Development, Project Management, Demand Planning, Marketing and others identified on the list. It’s very important that these communications be shared with the FDA on a timely basis (typically the same day received from the FDA). Separate communications received from the FDA to support GLS will be sent to the GLS leadership team as identified., • Support OTC submissions, as needed, for ANDA conversion to OTC or OTC Monograph direct including any labeling reviews and updates., • Ensure all manufacturing, packaging, labeling, testing and BA/BE sites are registered with FDA in the CDER Portal, as applicable, • Ensure the payments are made on the scheduled due date to support all manufacturing sites., • Submit all Recalls and FARS to FDA for ANDAs and OTCs, as needed to support commercial. Submit subsequent updates to Recalls / FARS to FDA on a timely basis to meet the required deadline., • Submit controlled correspondences for R&D through CDER NextGen Portal., • Submission of PLAIRS accurately and timely as provided to the US Office., • Shipping samples to the FDA for CDRH evaluation of devices., • Submit pre-ANDA Meeting Packages to FDA, as needed, • Submit Responses to FDA Observations to support manufacturing sites, as needed Qualifications Education • Extensive experience in the pharmaceutical industry with at least 10+ years’ experience in a regulatory affairs., • Primary experience must be managing a significant number of generic drug products (ANDAs & OTCs)., • Capable and has the desire to manage at direct reports, as assigned., • Excellent communication skills including: verbal, reading and writing., • Use various labeling software tools such as TVT and/or Global Vision. Can be trained and have direct reports trained according to support labeling., • Proficient using MS word, MS excel, reviewing Drugs@FDA databases, USP database, FDA Orange Book, DP Specifie Bioequivalence Guideline and Dailymed Labeling, • The successful candidate must be proactive in reading and understanding assigned materials including FDA guidance, 21 CFR, USP general chapters, USP specific monographs, and internal SOPs as assigned., • The candidate must be a highly motivated, willing to be trained and be a self-learner in order to execute assigned tasks with attention to the details., • This will require direct prior experience doing the described activities., • It will in some instances require training, reading internal Standard Operating Procedures (SOPs), in-person training, and training by viewing FDA SBIA learning on-line video seminars or reading FDA guidance., • Read and understand current FDA guidance(s) and trends, USP general/specific DS/DP monographs, and be familiar with ICH guidelines and post-approval change guidance(s) accordingly., • Communicate with Supervisor and other Sr. Management on a timely basis when potential issues/concerns arise., • Use critical thinking skills and attention to detail is essential., • Ask questions and/or advice when in doubt., • The incumbent typically works in an office environment and uses a computer, telephone and other office equipment as needed to perform duties., • The noise level in the work environment is typical of that of an office, • Incumbent may encounter frequent interruptions throughout the workday. Salary Range - $160,000 – 185,000 The compensation range provided reflects the expected base compensation only and does not include potential bonuses, incentive plans, or benefits. An individual’s final compensation offer will be based on a variety of factors, including but not limited to education level, relevant experience, training, and geographic location. Benefits include: • Paid time off, • 401k plus company match, • Company paid health benefits, • Dental, • Vision, • Onsite access to company gym, • Paid Employee Referral Program, • EAP – Employee Assistance Program, • Accident Insurance, • Critical Illness Insurance, • Short-Term Disability, • Life and AD & D Insurance, • Whole Life Insurance, • Pet Insurance and so much more! About the Company Glenmark is a global leader in the development and commercialization of generic drugs of the highest quality and value. We help to improve people’s lives every day by helping to reduce their healthcare costs while delivering high-quality medicines. Established in 2003 as a North American subsidiary of Glenmark Pharmaceuticals, we launched our first generic product in January 2005 and quickly emerged as one of the leading generic organizations in the United States. Today we have a diverse business. As a global leader in generics, we are leveraging our industry expertise and success to fuel extensive research to expand development in specialty branded products innovative products that are intended to have a major impact on how people live. This job description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company’s discretion. Nothing in this position description changes or is intended to change the employment at-will relationship with the Company. Employment at-will means that an employee or the Company may terminate the employment relationship at any time, for any reason or no reason at all, with or without notice. Glenmark Pharmaceuticals is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status.

Job Description Passaic County Community College is seeking a part-time Admissions & Financial Aid Administrator for the Office of Admissions main Paterson campus location. This position will be responsible for the enrollment activities of prospective and new students as assigned by the Director of Admissions. The is a part-time, administrative position. Examples of Duties • Initiate, organize and participate in recruitment activities throughout Passaic County and the North Jersey Region, • Manage a recruitment territory including schools, community agencies and special populations., • Counsel prospective and new students on all aspects of the enrollment process including general financial aid inquiries, presentations, workshops, etc., • Represent the College at various admissions functions as assigned., • Have familiarity with college academic programs, policies and procedures including reviewing eligibility for and entering placements., • Liaise with internal and external stakeholders., • Collaborate with internal and external stakeholders to drive the development and maintenance of relationships which drive enrollment and recruitment., • Lead, organize and support enrollment and recruitment related activities at all Passaic County Community College campus locations., • Bachelor's degree required, Master’s degree preferred., • Higher education experience preferred., • Excellent: oral/written/problem solving, communication, organizational, time-management and analytical skills, • Ability to work both independently and as part of a team, • Ability to collaborate effectively with other members of the college community, • Ability to understand and apply college policies, • Maintain essential and confidential records, • Excellent interpersonal skills and the ability to work with individuals from diverse backgrounds, • A valid driver's license, • Flexibility to work evenings and weekends, • Ability to work in a fast-paced environment, which may include; above average levels of noise, long periods of standing, carrying recruitment materials, driving at night and in varying weather conditions, • Computer literacy with Microsoft Office required, knowledge of new media including social networking and web-based communication preferred Compensation: Compensation is determined by a variety of criteria, including but not limited to, previous relevant experience, education level, and certifications. The hourly pay range for this position is $22-$27. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job Description MAURY MICROWAVE JOB DESCRIPTION Date: 06/23/2025 Job Title: RF Test Technician FLSA Status: Non-Exempt Department: DC Assembly & Test Reports to (Title): Lead Manufacturing Engineer Brief Summary of Position: Perform RF testing and calibration of instruments, sub-assemblies, RF assemblies, and complete hardware systems. Possess a well-rounded set of mechanical, electrical, and troubleshooting skills. The person hired for this position will work on industry-leading low-phase noise synthesis, analysis, power detection, and satellite link emulation products. Essential Functions of the Position: • Use complex tools such as spectrum analyzers, signal generators, vector-network analyzers, current probes, voltmeters, and precision inspection equipment to test and troubleshoot RF-based equipment in the frequency range of DC to 40GHz., • Use engineering and manufacturing instructions to test assembled electronic units. Ability to read and interpret electrical schematics., • Interpret data by applying a basic understanding of DC and RF: voltage, current, power, insertion loss, return loss, linearity, phase noise, noise figure, and spectral analysis., • Determine acceptable versus faulty performance. Repair and adjust as required using standard troubleshooting techniques., • Repair or replace defective or improperly functioning circuitry and electronics components using hand tools and soldering iron., • Maintain system logs to document testing and equipment operation., • Record and analyze data results from standard test routine formats., • Ability to manage multiple tasks and meet established deadlines. Requires good planning, organization, and time management skills., • Diligent in following ESD protocols., • Maintain a clean, safe work area compliant with ISO procedures, policies, and regulations., • Ask questions when instructions are not understood or are unclear. Requirements (education, prior work experience, special skills, etc.) • High school diploma or equivalent and 5+ years of formal electronic and mechanical assembly experience., • Ability to read and interpret electronic and mechanical diagrams., • Familiarity with cavity filters and frequency converters is a plus., • Simple programming skills is a plus., • Strong assembly and RF test skills., • Ability to use basic hand tools and soldering iron., • Excellent communication skills; good analytical and problem-solving skills., • Works well as part of a small team with high output., • Computer proficiency using various software programs (Microsoft Office, Factory test software), • Knowledge of Excel formulas Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance., • Group 401(k) plan with company matching contributions., • Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally

Job DescriptionDescription: Department: Manufacturing / Tool Room Reports To: Tool Room Supervisor / Plant Manager Classification: Hourly - Union Position (per Collective Bargaining Agreement) Union Affiliation: IAMS International Association of Machinists and Aerospace Workers Allstate Can, a division of The Ohio Art Company, is in search of a Tool & Die Machinist. This position will be required to work 4 days a week (M-Th 6a-4:30pm) with overtime potential on Fridays. The Tool & Die Machinist is responsible for fabricating, maintaining, and repairing tools, dies, jigs, fixtures, and other precision components to support production and ensure high-quality manufacturing operations. This role requires strong technical skills, precision machining capabilities, and adherence to safety and quality standards. As a union position, the machinist is covered under a collective bargaining agreement that governs wages, benefits, and working conditions. Key Responsibilities • Read and interpret engineering blueprints, CAD files, schematics, and technical drawings., • Set up and operate manual machine tools including lathes, milling machines, surface grinders, EDM, etc., • Manufacture, assemble, and test precision dies, molds, and tooling used in production., • Perform maintenance and repair of existing tools and dies to prevent downtime., • Conduct inspections using micrometers, calipers, height gauges, and other measuring tools to verify part conformity., • Collaborate with engineering and production teams to modify tools for improved performance., • Maintain clean and organized workspaces and comply with safety standards., • Document work performed, including material usage and job tracking records., • Follow union safety regulations, shift schedules, and workplace protocols.Requirements:, • High school diploma or equivalent (GED); technical trade school or apprenticeship completion preferred., • Minimum of 3–5 years experience as a machinist or tool & die maker., • Strong knowledge of machining practices, blueprint reading, and GD&T (Geometric Dimensioning & Tolerancing)., • Experience operating manual machining equipment., • Understanding of heat treating, material types, and manufacturing processes., • Familiarity with OSHA and union safety guidelines. Working Conditions: • This is a full-time, hourly position governed by the International Association of Machinists & Aerospace Workers (IAMS contract)., • Work to be performed in a manufacturing environment with exposure to noise, heat, and moving equipment., • Overtime opportunities per seniority and operational need.

Job Description Department: Quality Location: PTI Tech, Clifton NJ Reports To: Director of Quality Mission To uphold and advance the highest standards of quality across all stages of manufacturing—ensuring compliance with AS9100 and customer-specific requirements through robust documentation, risk management, and process validation. This role exists to proactively prevent quality issues, support internal and customer-facing investigations, and strengthen PTI’s reputation as a trusted partner for mission-critical components. Competencies – What This Person Must Be Standards-Driven: Understands and applies AS9100, ISO 9001, MIL-STD-1916 and customer-specific standards; ensures audits, validations, and ongoing operations meet all requirements. Root Cause Problem Solver: Leads investigations using 8D, 5 Whys, and Ishikawa methods to ensure sustainable corrective actions. Process Control Advocate: Uses SPC, PFMEA, control plans, and capability studies to ensure consistent, capable production. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Customer-Focused: Communicates clearly with aerospace, defense, and other high-stakes clients; drives issues to closure and delivers timely updates. Cross-Functional Collaborator: Partners with Engineering, Manufacturing, and Production teams to align on requirements, validate processes, and resolve issues quickly. Detail-Oriented: Manages documentation and compliance requirements with accuracy including FAIRs, PPAPs, CAPA records, SOPs, and quality alerts with full traceability. Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability. Key Responsibilities • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Lead investigations into internal and external quality issues; document findings and ensure timely resolution., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Coordinate timely responses to Supplier Corrective Action Requests (SCAR), Non-Conformance Reports (NCR), customer complaints, and quality-related queries., • Prepare and maintain First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145) documentation, and validation (IQ/OQ/PQ)., • Lead risk assessments (PFMEA) and develop control plans to mitigate quality risks., • Track and analyze defects and scrap data to identify trends and prioritize corrective actions., • Collaborate with manufacturing and engineering to improve processes and define inspection criteria., • Own inspection processes, including CMM (Zeiss – Calypso), OGP, and Keyence programming, as well as inspection fixture design (SolidWorks preferred)., • Oversee QC personnel training in partnership with manufacturing engineering to establish visual standards and develop work instructions., • Maintain SOPs, work instructions, inspection procedures, and training logs in compliance with AS9100., • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • 3–5+ years of quality engineering experience in injection molding or precision manufacturing, • Working knowledge of AS9100, ISO 9001, and MIL-STD-1916, • Experience with FAIR, PPAP, SPC, PFMEA, control plans, and CAD (SolidWorks preferred), • Proficiency in statistical tools (Minitab, JMP, Excel) and QMS/ERP systems, • ASQ Certified Quality Engineer (CQE) or Six Sigma certification, • Experience in the defense, aerospace, or medical device industries, • Hands-on inspection experience, including CMM, optical, or non-contact methods, • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipment, • Visual acuity sufficient to read prints, inspect parts, and identify quality defects, • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations, • Requires use of PPE, including safety glasses, gloves, and hearing protection, • Frequent collaboration with production, maintenance, and engineering teams on the floorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Job Title: Dental Assistant w/ X-ray - $3,000 Sign-on bonus Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices. Our practices are led by top-tier dentists committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and fostering a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will support the clinical needs of patients and doctors. Responsibilities include patient care, recordkeeping, and appointment coordination. You will work under the supervision of dentists and closely with dental hygienists in daily clinical operations. Duties and Responsibilities The duties include, but are not limited to: * Demonstrate knowledge of dental instruments and assist the dentist chairside during patient care. * Maintain inventory control in treatment areas. * Adhere to OSHA, HIPAA, and CDC guidelines. * Provide excellent patient interactions regarding scheduling, follow-up care, post-surgical instructions, and documentation. * Perform basic lab procedures such as taking impressions, pouring models, and preparing cases for external labs. * Perform other job-related duties as assigned. Qualifications * High school diploma or GED required. * Quick to learn new technologies and systems; eagerness to grow professionally. * Applicable licensing required depending on the state of employment. * 1+ years of experience as a Dental Assistant preferred. * Ability to work in a fast-paced environment. * Flexibility to work evenings and weekends as needed. * X-ray license required. Knowledge and Skills/Expected Competencies * Familiarity with dental instruments and patient care practices. * Clear communication skills for conveying clinical information. * Strong organizational, time management, and prioritization skills. * Ability to manage multiple tasks and deadlines efficiently. Benefits We value the dedication of our team and offer a comprehensive benefits package including: * PPE provided at or above industry standards * Competitive pay * Health and dental insurance * Dental discounts * Paid time off and holidays * 401(k) retirement plan * Opportunities for professional growth * Continuing education * Flexible scheduling * Training and development support Physical/Mental Demands and Work Environment This position requires the ability to stand and walk regularly, use hands and arms to operate equipment, and occasionally lift up to 25 pounds. Vision requirements include close vision and focus adjustment. The role may involve travel to clinical locations. The work environment is typically low to moderate in noise level. ProSmile reserves the right to modify the job description as needed and may require additional duties beyond those listed. This description does not constitute a contract of employment. Equal Employment Opportunity We foster a culture of inclusion, personal development, and innovation. ProSmile is an Equal Opportunity Employer and encourages applications from diverse backgrounds, including individuals from underrepresented communities and those with non-traditional educational or career paths. Company Safety Commitment ProSmile prioritizes safety for all staff and patients. All employees are required to follow CDC safety standards and wear appropriate Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more, as needed. Company DescriptionProSmile is a leading multi-specialty dental services organization with a network of more than 1,800 premier healthcare professionals serving patients in more than 80 locations throughout the mid-Atlantic & mid-West regions of the U.S. ProSmile’s practices offer a range of services from basic exams and cleanings to specialty services, including pediatrics, endodontics, periodontics, orthodontics, and oral surgery.ProSmile is a leading multi-specialty dental services organization with a network of more than 1,800 premier healthcare professionals serving patients in more than 80 locations throughout the mid-Atlantic & mid-West regions of the U.S. ProSmile’s practices offer a range of services from basic exams and cleanings to specialty services, including pediatrics, endodontics, periodontics, orthodontics, and oral surgery.

Job Description Job Title: Dental Assistant w/X-ray - $2,000 Sign-on Bonus Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR 2uMqGerHGY

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • Trains research assistants and graduate students, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Preparation of proposal estimates of time and expenses required to complete project. Qualifications: • Bachelor’s degree in related field, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license preferred., • 40-hour OSHA HAZWOPER certification, • Licensed Site Remediation Professional (LSRP) license preferred, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $100,000–$140,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Job Title: Human Resources Manager - Benefits & Compensation Regular Full-Time Work Location: Hybrid, Parsippany, NJ, US Salary Range: $90,000 - $100,000 About Us: Delta Dental of New Jersey, established in 1969 as the state's largest dental coverage provider, has grown over more than 50 years to serve over 1.7 million people across New Jersey and Connecticut. As part of the national Delta Dental Plans Association, we connect over 75 million people with quality dental coverage through 139,000 groups nationwide. In Connecticut we operate through Delta Dental of Connecticut, Inc., which writes fully insured dental coverage. In New Jersey, Delta Dental of New Jersey, Inc. writes fully insured and self-funded dental benefit programs. Our comprehensive offerings include managed care, approved fee for service, PPO, and HMO-type programs, as well as dental access and individual dental plans. We also offer DeltaVision® in conjunction with VSP®, serving more than 88 million members through nearly 137,000 access points nationwide. With a team of 300 dedicated employees, we remain committed to innovation and excellence in dental insurance, as reflected in our Standard & Poor's "A+" rating for financial strength. Our commitment extends beyond business through the Delta Dental of New Jersey Foundation, which awards nearly $1 million annually to support dental care for underserved populations, educational scholarships, and community programs. Our Mission Statement is to promote oral health to the greatest number of people by providing accessible dental benefit programs of the highest quality, service, and value. Join our growing team and be part of an organization that values associate development, promotes wellness initiatives, supports diversity, and provides opportunities to volunteer for causes you care about. Benefits: In addition to a great culture, we offer excellent benefits including medical, RX, dental and vision, life insurance, short and long term disability, spending accounts, and matching 401k. We value our associates and support everyone with learning and development, recognition programs, active wellness and diversity initiatives, tuition reimbursement, and generous paid time off to recharge – even paid time off to volunteer at causes that you care about. * see below for additional benefit information. Job Summary The Human Resources Manager is responsible for shaping and leading the compensation function and reward strategy for the organization to attract, retain, engage and motivate associates. This manager position plans, develops and implements new and revised compensation programs, policies and procedures to align with the company's goals and competitive practices. This position is also responsible for ensuring that company compensation programs are consistently administered in compliance with internal policies and government regulations. Essential Functions & Responsibilities • Manages the development, implementation and administration of compensation programs, ensuring administration consistency and compliance with internal polices and government regulations., • Monitors the effectiveness of existing compensation practices and recommends changes that are cost-effective and consistent with compensation trends and organization objectives., • Provides counsel to corporate staff on pay decisions, policy interpretations, and job evaluations., • Creates and maintains compensation structures/bands, evaluating job descriptions and associated total rewards., • Designs creative solutions to specific compensation-related programs and incentive plans, for example, the Actuarial Talent Program, ACE, and Spot Bonus programs., • Oversees health and benefit plans, designs, and stays current on the market, adjusting for best programs, and seeks opportunities to adjust offerings., • Manages open enrollment., • Oversees FMLA and leave management., • Assists with budget creation, maintenance, and adherence., • Develops techniques for compiling, preparing, and presenting data., • Oversees the participation in salary surveys and monitors salary survey data to ensure corporate compensation objectives are achieved., • Ensures compliance with federal, state, and local compensation laws and regulations. Essential Qualifications DDNJ Competencies Accountability Strategic Thinking Organizational Agility Financial Acumen Confidentiality Ethics and Values Problem Solving-Analysis Attention to Detail Ability to Maintain Composure Intellectual Horsepower Knowledge, Skills & Abilities Technical and Functional • Knowledge of all federal, state and local regulations as they apply to base and incentive compensation and compliance requirements related to employee compensation., • Strong analytical skills and ability to interpret large data sets and communicate data., • Computer proficiency and technical aptitude with the ability to use Microsoft products, including strong proficiency with Excel., • Ability to establish confidence and gain buy in., • Strong aptitude for negotiation., • Excellent time management skills and ability to plan and set priorities., • Excellent verbal and written communication skills., • Strong interpersonal skills in working with senior management. Required Physical Abilities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to sit and perform extensive close keyboard and PC work, • Ability to walk, talk, and hear, • Ability to meet deadlines and attendance standards., • The noise level in the work environment is usually moderate. Experience Required • 5-7 years of progressively responsible experience in employee compensation and total rewards Required Educational Level • Bachelor's degree or equivalent in business, human resources or related field Certifications required/preferred • CEBS and/or PHR/SPHR/SHRMCP/SHRMSCP strongly preferred, • Benefit Disclaimer: The benefits set forth in this posting reflect DDNJ’s benefits policies in place at the time of posting, as are made available to other similarly situated employees of DDNJ, although participation is at all times in accordance with and subject to the eligibility and other provisions of such plans and programs. DDNJ reserves the right, in its sole discretion, to prospectively modify or terminate any of its benefits plans or programs at any time and for any reason, to the extent permitted by applicable law. DDNJ complies with all applicable state and federal wage and hour, pay equity and pay transparency laws. Primary Location Full Time Salary Range: In addition to salary, Delta Denta of New Jersey’s offerings may also include, for eligible employees, discretionary and formulaic incentive awards. Available offerings may vary by geographic location, job level, skills, experience, qualifications, education and date of hire. Delta Dental of New Jersey is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender identity, national origin, genetics, disability, marital status, age, veteran status, domestic partner status, medical condition or any other characteristic protected by law.

Job Description Job Title: Dental Assistant w/X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR s8XCM7OvuI

Job Description Summary As a Human Resources Intern, you will be an integral part of our HR team, gaining valuable hands-on experience in various aspects of human resources. This internship offers an opportunity to apply theoretical knowledge gained in academic settings to real-world scenarios while contributing to the success of our firm. You will work closely with HR professionals, assisting in recruitment, employee relations, training, and development, and assisting both HR and our Administrative team. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Assist in posting job openings on various platforms., • Screen resumes and applications to identify potential candidates., • Schedule interviews and communicate with candidates regarding interview arrangements, • Assist in organizing and conducting new employee orientations., • Prepare and distribute letters, communications, and announcements, • Provide support in handling employee inquiries and concerns., • Assist in maintaining employee records and databases., • Contribute to the development and implementation of employee engagement activities., • Assist in intern experience., • Assist in town hall and Newsletter preparations for the firm., • Assist HR Generalist II in organizing training sessions for employees., • Update Excel files., • Assist with wellness programs implementation., • Provide general administrative support to the HR department., • Assist in ensuring compliance with labor laws and regulations., • Support HR Team in conducting audits and assessments as needed., • Help maintain confidentiality and integrity of HR related information., • Participate in special projects and initiatives as assigned by HR management., • Contribute ideas and suggestions to improve HR processes and practices. Supervisory Responsibilities This job has no supervisory responsibilities. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instructions, responds to management direction. Keep commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner Quality - Applies feedback to improve performance. Demonstrates accuracy and thoroughness. Displays commitment to excellence. Looks for ways to improve and promote quality. Monitors own work to ensure quality. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Pursuing BS in Human Resources Management or related field. Excellent written and verbal communication skills. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills Proficient or familiar in MS Office, Word, Excel, Outlook, and PowerPoint. Certificates, Licenses, Registrations Valid Driver’s License and reliable transportation. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee must be able to lift and/or move up to 25 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will work in a typical office environment, mostly located indoor with windows. This position may experience frequent interruptions, conversations, equipment noise, or other background noise. The noise level in the work environment is usually low to moderate. Compensation: Hourly Rate: $19.50/hr. -$21/hr.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SUMMARY The position of Quality Assurance manager is responsible for all facets of the operation of the Quality Assurance and Food Safety functions. The duties expected include: accurate analysis of samples, recording of results and distribution of results to appropriate individuals, routine shipment of samples to outside laboratories for analyses not performed in house, monitoring product specifications and making changes in product specifications as needed, establishing raw materials blends to meet specifications of flour to be produced, overseeing functional operation of regulatory programs to assure plant compliance, (including HACCP, GMP’s, Master Sanitation Schedules, BRC standards and FDA standards), championing Root Cause/Corrective Action activities. monitoring effectiveness of recalls. Communicating with customers is a vital function performed by the Quality Assurance Manager. Communications include timely submitting of C.O.A.’s to the customer and answering customer questions and complaints. The Quality Assurance Manager will lead all facets of the Quality Assurance Department including Quality Programs, Food Safety, Sanitation Programs, Customer Programs, Data Management, Process Improvement and Laboratory Analyses and will have a staff of Lab Technicians and Food Safety Supervisor working under their direct supervision to help accomplish the above responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Maintain compliance with BRC Global Standard for Food Safety, Organic, Gluten-Free, Kosher, and other applicable certifications, including documentation and record-keeping., • Manage raw material blends to ensure adherence to final product specifications., • Collaborate with customers to resolve quality and food safety complaints. Lead root cause analysis and corrective action initiatives., • Monitor, analyze, and report on quality standards, deviations, and cost/value opportunities for all products manufactured at the facility., • Ensure adherence to QA/FS principles, good manufacturing practices, and Corporate Quality Assurance provided by all site departments., • Manage product sampling, laboratory test procedures, and communication of results., • Oversee plant sanitation, regulatory inspections, and the administration of other site-specific pre-requisite programs., • Direct the plant Quality Assurance team, including selection, training, leadership, scheduling, and task assignment., • Serve as the primary escalation point for all Quality Assurance and product testing matters. Make accept/reject decisions on incoming grain/ingredients and outgoing customer shipments., • Provide technical expertise on ingredient quality, specifications, and product performance to all departments, supporting new product setup, label approval, and ingredient systems., • Maintain quality control lab testing equipment by ensuring preventative maintenance programs are adhered to and support troubleshooting when deviations arise., • Lead initiatives supporting Corporate Quality Assurance business plan and site programs (e.g., safety, recognition)., • Provide technical leadership and expertise in Quality Assurance and Testing., • Conduct interviews, onboarding, training, and performance evaluations for the QA team., • Analyze customer needs, develop finished product specifications, and prepare customer ingredient samples., • Collaborate with procurement and suppliers to resolve quality and food safety complaints. Respond to customer quality inquiries. PLANT SPECIFIC DUTIES: • Monthly floor coaching with Plant Manager/Supervisory team in various departments to drive coaching/training efforts with all plant team members., • Food Safety and sanitation position reports to QA Managers QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Bachelor's degree in Food Science, Cereal Science, Biology, Chemistry, Milling Science, or a related field., • 5+ years of experience in laboratory management, quality control, or quality assurance., • Technical expertise in all aspects of quality, food safety, and sanitation within food manufacturing., • Strong working knowledge of food plant operations, production equipment, cleaning and sanitizing procedures, and food quality standards (HACCP, USDA, FDA, AOAC, FSMA)., • Communication skills to effectively convey and implement the QA vision with key stakeholders., • Ability to effectively manage conflict., • Decisive leadership skills and a proactive approach., • Experience in employee management, including setting expectations, defining schedules and milestones, conducting performance reviews, and developing career advancement plans., • Proven track record of driving continuous improvement; Lean, Six Sigma, Kaizen, or CQE certification is a plus. Ability to apply mathematical concepts to practical operational situations., • Prior experience in grain milling manufacturing is highly preferred., • Strong problem-solving skills, including the ability to define problems, collect data, establish facts, and draw valid conclusions. Formal root cause analysis training is a plus. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This position requires the ability to stand and/or walk for extended periods., • Occasional bending, stooping, kneeling, crouching, or crawling may be required., • Frequent sitting at a workstation is expected., • Finger and hand dexterity is necessary for keyboard use and operating laboratory equipment., • Specific vision requirements include close vision, distance vision, color vision, and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This position involves routine exposure to dust and fumes typically found in cereal grain processing facilities and testing laboratories. The laboratory's noise level is generally moderate. Noise levels exceeding 90 decibels should be expected in the production environment. FOOD SAFETY / SECURITY REQUIREMENTS: The Company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained on and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of the work environment and, when possible, prevent accidental or intentional adulteration of products produced at this facility. As a result, any employee has a right to put product on hold if they have concern. At the plant level, only the Quality Assurance Manager and General Manager have the authority to release the product on hold.