Trabajos now hiring en San Diego, California - Page 5Crear alertas

A MISSION WORTHY OF A CAREER! If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent. USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America. Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below). Salary and Benefits Annual Base Salary for newly appointed BPAs varies per grade, as follows: Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ. Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years. Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations. U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED. Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level. Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: • Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa, • Buffalo Sector Stations - Wellesley Island, • Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde, • El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta, • El Centro Sector Stations - El Centro, Indio, Calexico, • Grand Forks Sector Stations - Pembina, • Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass, • Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren, • Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata, • Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen, • San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente, • Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville, • Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford, • Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations, • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations, • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband, • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: • Make sound judgments and decisions in the use of firearms., • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters. Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application. Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement. Other Requirements Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veter

Location: San Diego, CA Field Service/Installation Technician at Benco Dental At Benco Dental, our company is our family, and we are looking for a new addition to assist us in Driving Dentistry Forward. Please review the description below carefully to ensure that this position is the perfect match for you! What's in it for YOU? * Excellent Compensation Packages * Medical, Dental and Vision Benefits Effective on Day 1 * 401k Package, Paid Time Off Program, and Profit Sharing * Associate Discounts and Community Giveback Programs * College Tuition Savings Program * Caring Family Culture Toward all Associates * Certified as a FORTUNE Great Place to Work * Opportunities to Build a Better Benco through Diversity and Inclusion Resource Groups * Family owned for 90+ years Position Summary: The Field Service/Installation Technician is a vital part of our company providing hands-on support to our customers. Service Technicians are independent team players who want to be customer focused. As the Service Technician, you will offer solutions to our clients that extend beyond repairs and maintenance to exemplify our number one goal: driving dentistry forward. Benco Dental offers service technicians career development and will provide a strong sense of accomplishment. Do YOU Possess These Skills and Attributes? * Computer proficiency, including knowledge of Windows-based programs * Organizational skills * Problem solving skills * Exceptional communication skills No Bio-Medical (dental) Device repair experience? No problem! Other relevant experience includes: * Mechanical or Technical experience/education * Electrical, Customer service, Military, or Software/hardware experience * Pneumatics * HVAC Do These Responsibilities Interest YOU? * Providing maintenance and repair services out in the field * Training staff on using equipment * Training customers on using equipment Do YOU Meet These Requirements? * High School Diploma or equivalent * Valid driver's license and clean driving record (Required) * Technical training in the bio-medical or electronics field (Preferred) * Physical: * Routine walking, bending, kneeling, and squatting, sitting, standing, reaching, and twisting * Must frequently lift/lower/carry/push/pull 1 to 55 pounds, occasionally lift/lower/carry/push/pull 56 to 100 pounds * Position requires routine pushing, pulling, grasping and manual dexterity in the use of hands, arms and shoulders * Able to work in tight spaces * Frequent travel to customer sites (daily) and occasional use of power tools The base pay range of $23.80-27.50/hour represents the low and high end of the hiring salary range for applicants that meet the minimum qualifications (Tech-in-Training). Actual salaries will vary and may be above the range based on factors including but not limited to location, experience, and performance. The range listed is just one component of our total compensation package for employees. Other financial rewards may include bonuses, profit sharing, and Paid Time Off. Who We Are: It's our Mission to Drive Dentistry Forward Benco Dental, the largest privately owned, full-service dental distributor in the United States, has remained in the family since 1930-a family that now includes our more than 40,000 customers and over 1,500 associates in the 48 contiguous states. We provide more supply and equipment options than any other full-service distributor, an offering enhanced by a comprehensive suite of services, including office design, equipment repair, practice coaching, financing and project management, wealth management and dental-specific technology solutions. These services are supported by over 400 professionally trained sales representatives and 300 factory-trained service technicians who begin every task by asking "What does the customer want?" If you enjoy working for a progressive company, who is committed to diversity in our workforce, who values all customers and associates, who also provides the opportunity for growth and development- we encourage you to learn more about our Benco family. We are looking for driven professionals who want to play a key role in our future success, while making a positive impact within our industry. Thank you for your interest in Benco Dental. We look forward to hearing from you! We're proud to be an equal opportunity and affirmative action employer. At Benco Dental we celebrate our associates' differences to foster a culture of diversity and inclusion every day. Click here to learn more about how we promote Equal Opportunity and Diversity and Inclusion at Benco. *This position is a field-based / territory-based / virtually- based / remote-based position that does not require consistently reporting to a physical Benco location.

Job Position: Maintenance Location: San Diego, CA 92127 Pay Rate: $22 - $23/hr Shift: Description: Jumpstart Your Career with InterSolutions Now Hiring Apartment Maintenance Technicians! Put your maintenance skills to work! InterSolutions is hiring Apartment Maintenance Technicians and looking for motivated, quick learners with a positive attitude to join our team. Why Join InterSolutions? • Fast and simple hiring process apply online today!, • Opportunities for permanent placement, • Referral bonuses for bringing in new talent Primary Responsibilities Include: Complete service tickets and work orders efficiently and accurately Prepare vacant apartments for new residents by managing the turnover process Keep grounds and common areas clean and free of debris Deliver exceptional customer service to residents Perform electrical, plumbing, appliance, and carpentry repairs, including: • Repairing electrical circuits, switches, and breakers, • Servicing and installing light fixtures and appliances (stoves, refrigerators, washers, dryers), • Fixing and replacing toilets, sinks, vanities, disposals, and caulking, • Handling minor carpentry repairs, including doors, window screens, and blinds, • Painting and drywall repair as needed, • Removing bulk trash, including discarded appliances Requirements: Basic knowledge of maintenance repair and service across multiple areas Previous apartment maintenance experience preferred HVAC Certification is a plus Capable of lifting up to 40 pounds and safely using ladders Strong verbal and written communication skills Ability to work weekends as required null

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Flexible schedule, • Training & development Caregivers (CNA / LVN) - Urgently Hiring HomeWell Care Services Now Hiring: Male & Female Caregivers with Personal Vehicles Do you want to be treated with the respect you deserve? At HomeWell Care Services, we believe our caregivers are the heart of everything we do. We are committed to treating our team with dignity, compassion, and respectbecause thats exactly how we expect our caregivers to treat the clients we serve. We are currently seeking compassionate, dependable caregivers to join our growing team. This role provides one-on-one, non-medical care that allows seniors to remain safe, comfortable, and independent in their own homes. If youre passionate about improving seniors livesone day at a timewed love to meet you. Caregiver Responsibilities With dignity, compassion, and professionalism, caregivers may assist with: • Companionship and emotional support, • Light meal preparation and light housekeeping, • Bathing, grooming, and toileting assistance, • Assistance with ambulation and medication reminders, • Transportation to appointments and errands Qualifications • Minimum of 6 months full-time or 12 months part-time experience caring for geriatric or chronically ill individuals, • Excellent communication and interpersonal skills, • Reliable personal vehicle, • Valid drivers license and current auto insurance (required if transporting clients), • Proof of current TB testing, • Physically able to perform job duties Apply today and become part of the HomeWell family.

Job Description Now Hiring Compassionate Caregivers | Join a Team That Puts Quality Care Above All Else in La Jolla, Del Mar, Pacific Beach and all of San Diego, CA At Interim Care of San Diego, we believe home care is more than a service — it’s a relationship built on trust, empathy, and respect. We’re a nurse-owned, female led agency dedicated to providing quality care above all else. Do you have that special quality of being able to help people? Then step into a role where you are valued and treated like family. Who We’re Looking For We’re seeking kind-hearted, and dependable caregivers who take pride in making a difference every day. The ideal candidate is someone who treats clients like family and brings warmth, patience, and professionalism into every home. Whether you have years of caregiving experience or if you are brand new to the working world, if you have the core values we are looking for, please apply. At Interim La Jolla, you’ll join a family of caregivers who are touching lives through the personal care they provide. When age or health obstacles make daily activities difficult for seniors, you’ll lend your strength and make each day a little brighter. Why You’ll Love Working With Us * A caring, professional team that truly values you * Ongoing support and training opportunities * Clients matched thoughtfully based on personality and care style * A workplace that celebrates compassion and excellence If you believe in caring from the heart and want to be part of a trusted, compassionate team — we’d love to meet you. Apply today and help us make a difference, one family at a time. Our Caregivers enjoy some excellent benefits: • $22-25/ hr, • 1:1 Aide-to-client ratios, • Set your own schedule and enjoy work-life balance, • Enriching the lives of others, • Provide the personal care and support seniors need to live safely at home, • Assist with activities of daily living such as bathing, dressing, grooming, light housekeeping, meal preparation, shopping, transportation and companionship, • Help with ambulation, transferring and range of motion exercises, • Provide medication reminders, document their condition, • Ensure a safe home environment with unobstructed pathways, • High school diploma (or equivalent), • Six (6) months of experience in a healthcare role, preferred, • Patience, • Empathy, • Reliability, • CPR certification, • Valid [CA] driver’s license, auto insurance and reliable transportation, • Compassionate and helping nature, good communicator and ability to lift up to 50 lbs. Founded in 1966, Interim HealthCare is the nation’s first home care company and a leading employer of Home Care Aides (HCAs)/Caregivers. Operating through 300+ offices, our commitment to you is expressed through a family-oriented culture that values and appreciates HCAs, and a passion to put patients first. Join a nationwide network of caregivers who are making a significant difference in the lives of others through the personalized, in house care they provide. Interim HealthCare is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is redefining autonomous aviation with cutting-edge AI and GPS/RF-denied navigation technologies. Now, we’re building our next-generation aircraft, XBAT, like no other—one that will push the boundaries of innovation and performance. We’re looking for a Power Engineer II to contribute to the design, analysis, and validation of power electronics systems critical to our aircraft. This role is perfect for an engineer with a solid foundation in power systems who is eager to grow, own challenging projects, and see their work move rapidly from concept to flight. If you thrive in fast-paced environments, enjoy solving complex problems, and want to help build the future of autonomous aviation, we want to hear from you.What you'll do: • Design Power Electronics: Design of HV and LV systems including:-High-voltage and low-voltage power systems-DC-DC converters, inverters, and motor controllers-Battery, Battery management, power generation, and distribution-Embedded safety and protection mechanisms, • Design across power ranges: Engineer solutions from <1 kW low-power systems to >10 kW high-power applications, • Full-cycle hardware development: Own the entire flow — concept, modeling, worst case analysis, schematic capture, simulation, prototyping, design reiteration for improving design maturity, testing and validation, • PCB ownership: Drive PCB layout and design with ECAD engineers, optimizing for power density, EMI, thermal, and manufacturability, • Design for Safety, Manufacturability and Reliability: Design robust systems keeping in mind best practices for safety, manufacturing and reliability, • Board Bring Up and Testing: execute board bring up, verification, validation and HALT testing to meet rigorous aerospace reliability standards, • Cross-functional collaboration: Work closely with Mechanical, CAD, Embedded, Software, Production and various aircraft teams throughout the product lifecycle, • Design review leadership: Lead and contribute to cross-functional reviews ensuring robust, high-integrity engineering decisions, • Program execution: Manage project timelines, deliverables, and technical milestones to drive on-time, high-quality outcomesRequired qualifications:, • You have a B.S. in Electrical Engineering or equivalent, • You have 1+ years of experience as an Electrical Engineer, • You are experienced with: circuit design, schematic capture, component selection, circuit testing, and debugging, • You have a demonstrated record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others, • Familiarity with Altium or equivalent Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Labor One is hiring Journey-Level Carpenters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:To perform this job an individual must be able to understand the full scope of work of any assigned job and successfully complete the required tasks with minimal supervision. Tasks include constructing, installing, repairing, and fabricating structures (primarily wood) to protect ship's equipment, outfitting the drydock with docking blocks, and outfitting ships in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. High school degree or equivalent (GED), or vocational school degree. Must have six (6) years of related experience. QUALIFICATIONS, DUTIES, AND RESPONSIBILITIES -Must possess the skill sets of subordinate grades of the labor class. -Must be able to interpret and work from drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders, and contract specifications. -Must possess a thorough understanding of equipment and work processes used in marine carpentry, joiner, and drydock blocking operations. -Must be able to operate and care for Carpenter Shop equipment, portable power tools, and hand tools. Layout, cut, and fabricate products from blueprints, owner specifications, and sketches. -Must be able to work with US standard and metric measurements and be able to add, subtract, multiply and divide. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Carry out instructions furnished in written, oral, or diagram form. Deal with unexpected events related to your assigned task in a professional manner. -Accountable for completion of daily work assignments including the completion and signatures to work completion and quality. -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Keep the work area clean and safe at all times, especially at the end of the shift. -Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. COMMUNICATION SKILLS The candidate must be able to read and comprehend basic instructions, short correspondence, and memos to the extent necessary to accomplish the work requirements. Must be able to interpret specifications and drawings and possess the ability to write comprehensive Condition Found Reports (CFR) describing the problem found, and corrective action required. Must be able to communicate hazardous conditions to other employees. WORK ENVIRONMENT -The work environment described are representative of those an employee will encounter while performing the essential functions of this job. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished from mechanical lifts. -The working environment in the shipyard varies from a normal office environment to outside weather conditions of precipitation, wind, extreme cold, and extreme heat and high humidity. When working inside of vessels the environment may be smoky, hot or cold, and low levels of illumination may be present. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is redefining autonomous aviation with cutting-edge AI and GPS/RF-denied navigation technologies. Now, we’re building our next-generation aircraft XBAT like no other—one that will push the boundaries of innovation and performance. We’re looking for a Principal Power Electronics Engineer to own the design of power electronics and the system they integrate with on the X-BAT aircraft. This includes architecture and converter design, development, and delivery across our aircraft programs. You will define requirements and be responsible for design from concept to production. If you excel in cross-functional collaboration, thrive in fast-moving environments, and are passionate about pushing the limits of power system design, we want to hear from you.What you'll do: • Own flight critical power system design for X-BAT, • Design power electronics for the high voltage and low voltage systems. This includes inverters, DC-DC converters, battery management, and other power electronics, • Lead others to execute design, verification, and manufacturing deployment, • Provide mentorship and technical feedback to others on the power team and cross-functionally, • Harden the designs for harsh environments such as shock/vibe, high reliability, radiation, and high-altitude, • Work on power sub-systems and designs for both low power (<1 kW) and high power (>10 kW), • Full-cycle hardware development: Own the entire flow — concept, modeling, worst case analysis, schematic capture, simulation, prototyping, design reiteration for improving design maturity, testing and validation, • PCB ownership: Drive PCB layout and design with ECAD engineers, optimizing for power density, EMI, thermal, and manufacturability, • Design for Safety, Manufacturability and Reliability: Design robust systems keeping in mind best practices for safety, manufacturing and reliability, • Cross-functional collaboration: Work closely with Mechanical, CAD, Embedded, Software, Supply Chain, Test Automation, Production and various aircraft teams throughout the product lifecycle, • Design review leadership: Lead and contribute to cross-functional reviews ensuring robust, high-integrity engineering decisions. Mentor junior engineers that support your design, • Program execution: Manage project timelines, deliverables, and technical milestones to drive on-time, high-quality outcomesRequired qualifications:, • You have a B.S. in Electrical Engineering or equivalent, • You have 10+ years of experience as an Electrical Engineer, • You are experienced with: circuit design, schematic capture, component selection, circuit testing, and debugging, • You have a demonstrated record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others, • Familiarity with Altium or equivalent #LI-JM2#LF Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Overview NaphCare is hiring a strong FT Qualified Mental Health Professionals (QMHPs) just like you to join our team at the San Diego County Jail located in San Diego, CA. NaphCare is hiring Independently and Dependently Licensed Mental Health Professionals (Example, LCSW, LCMHC, LMFT, LMHP, LMSW, LISW, LPC, or LPCC) just like you to join our team and we have Full Time. Pay rates vary based on shift, site needs, and experience. Shifts and hours vary based on coverage needs and can be discussed upon interview. New grads are encouraged to apply and supervision for dependently licensed may be available. Responsibilities The Mental Health Professional, is responsible for providing performing and documenting mental health evaluations, developing treatment plans, and monitoring progress notes. Additional responsibilities may include and not be limited to: • Providing individual and group therapy, including specialized groups like substance abuse or sex offender therapy, • Intervening in crisis situations, including suicide prevention and emergent mental health needs, • notes, • Participating in educational and training activities related to mental health care for patients, security personnel, and healthcare staff, • Collaborating with other professionals, such as medical staff, correctional officers, and social workers, to provide holistic care, • Preparing inmates for release by connecting them with community resources and support services Qualifications Education / Licenses / Certifications • Master's prepared licensed Mental Health Professional with active, unrestricted licensure in CA, • Must possess and be able to maintain BLS (Basic Life Support) certification; AHA or American Red Cross, preferred Experience / Requirements / Qualifications / Skills • Experience with underserved and marginalized populations, including those with mental health and substance use disorders, • Strong communication skills and ability to communicate with diverse individuals, including other medical professionals, correctional staff and judges, • Demonstrate knowledge of DSM-V / DSM-V-TR criteria, • Ability to interpret and analyze data to create treatment plans, • Knowledge of applicable laws, regulations, and industry standards, • Able to maintain confidentiality of all proprietary and/or confidential information, • Display integrity, professionalism and be able to adhere to a Code of Conduct and comply with all facility(s) correctional healthcare policies, procedures, and legal requirements, • Must pass the facility’s criminal background check and drug screening Why Join NaphCare? NaphCare is one of the largest providers of healthcare services to correctional facilities throughout the US and we are growing. If you have never considered a career in correctional healthcare, now may be the time. In addition to competitive salaries and generous employee benefits, we strongly support career advancement within the company. NaphCare Benefits for Full-Time Employees Include: • Health, dental & vision insurance that starts day one!, • Prescriptions free of charge through our health plan, beginning day one!, • Lowest Cost Benefits!, • Employee Assistance Program (EAP) services, • 401K and Roth with company contribution that starts day one!, • Tuition Assistance, • Referral bonuses, • Term life insurance at no cost to the employee, • Generous paid time off & paid holidays, • Free continuing education and CMEs NaphCare has a partnership with NetCE that provides CEU/CME for our staff. NetCE uses a rigorous peer review process to ensure that all activities and content are up-to-date. This service streamlines continuing education for all NaphCare Employees to meet state specific requirements for maintaining licensing. If you would like to speak with me to learn more about this position and NaphCare, please first apply directly to the position then send your resume to and I’ll be in touch. Equal Opportunity Employer: disability/veteran Follow Us: Instagram | Facebook | LinkedIn | Advancing Correctional Healthcare | NaphCare

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is redefining autonomous aviation with cutting-edge AI and GPS/RF-denied navigation technologies. Now, we’re building a next-generation aircraft like no other—one that will push the boundaries of innovation and performance. We are looking for a Senior Staff Electromechanical Engineer to join our team, focused on the design and integration of avionics systems and driving designs from concept to production. If you thrive in fast-paced environments, excel in cross-functional collaboration, and are passionate about building high-performance avionics systems, we want to hear from you. What you'll do: • Design complex electro-mechanical solutions for avionics packaging, electrical interconnects, thermal management, and aircraft integration, • Perform structural, preliminary thermal, and modal analyses for avionics to ensure survivability in harsh environments, • Ensure avionics meet performance, safety, environmental, and EMI/EMC compliance standards, including DO-160, DO-254, DO-178C, MIL-STD-810, and MIL-STD-461, • Own your design work from concept to reviews through system validation, failure analysis, and flight test readiness.Required qualifications:, • B.S. and/or MS in Mechanical/Aerospace Engineering, • 10+ years of experience in mechanical & electrical equipment design for aerospace, including harness integration and mechanical component design, • Expertise in CAD software (NX, SolidWorks, CATIA, or similar) for 3D modeling, drawing creation, and system layout., • Familiarity with eCAD software (Altium, Cadence, Allegro), and harness design software (Capital, Zuken), • Experience working with electrical engineers to define PCB constraints, develop circuit cards, and care for all the, • Experience with finite element analysis (FEA), thermal analysis, and fatigue/lifecycle testing Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionThe Retail Sales Associate is responsible for providing an excellent customer experience and performing duties as assigned including, but not limited to, cashier, sales floor merchandising, replenishment, receiving and e-commerce fulfillment. Responsibilities: • Model company values in all actions, communication and decision-making, • Maintain store standards by assisting with stocking, merchandising and e-commerce operations recovering the store to maintain cleanliness; and completing various operational projects/tasks, • Performs any other duties as directed by management, • Consistently create a positive customer experience through the utilization of the sales and customer service programs, • Educate and enroll customers into BevMo!’s ClubBev Program and the Gopuff App., • Use product knowledge and BevMo! training to make product recommendations to customer, • Provide the customer with solutions, such as product substitutions or special ordering a product when applicable, • Pick and pack items on a per order basis for dispatch to customers, • Ability to ensure accuracy of items picked/packed, • Clean and organize warehouseRequirements:, • Must be 21 years of age, • Retail, e-commerce or warehouse experience is preferred, • Communication: Provide the information required by others in a concise, direct, and unambiguous way. Strive to ensure that the receiver clearly understands the specifics of the message and are able to listen to, receive, and understand messages conveyed by others, • Driving Results: Motivate individuals to achieve and exceed goals by establishing accountabilities, clarifying performance expectations, agreeing to high standards and measures, monitoring and reviewing performance, and providing timely and relevant feedback., • Process Management: Take a systematic approach in contributing to making the company’s workflow more effective, efficient, and capable of adapting to an ever-changing environment, • Collaboration and Teamwork: Work interdependently and collaboratively with others to achieve mutual goals. Subordinate individual aims in the interest of working with others in a way that promotes and encourages each person’s contributions toward achieving optimal outcomesWhat We Offer, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff/Bevmo! pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based in a cost of labor index for that geographic area., • La Jolla, CA: $17.75 per hour

Job DescriptionBevMo! by Gopuff is seeking a Key Holder for our Retail Operations team. This position is responsible for opening and closing the store and performing other duties in the absence of management. A Key Holder will assist the store in periods of high volume and provide support for new employees, providing excellent customer service while driving sales.Responsibilities: • Provide excellent customer service by greeting and establishing rapport with customers while informing them of the products and services, • Arrive early to open the store and leave late to close the store, • Will assist the store in periods of high volume and provide support for new employees, • Knowledge of in house products to provide customers with recommendations, • Assist with inventory management tasks such as restocking merchandise, conducting inventory counts, and identifying discrepancies., • Process cash transactions accurately and efficiently, including opening and closing tills, counting cash, and preparing deposits., • Operating scanners, cash registers, and other electronics, • Follow proper age verification policies, • Ensuring all prices and quantities are accurate and providing a customer receipt, • Processing refunds and exchanges, • Monitor the sales floor to prevent theft and minimize loss, including conducting bag checks and ensuring adherence to security procedures., • Store cleanliness and assist in maintaining standards on the sales floor, stock room, lockers, and bathrooms, • Train new employees on store procedures, product knowledge, and customer service standardsQualifications:, • 1+ years leadership experience in retail, grocery, military, restaurant or equivalent experience, • Ability to work with fluid schedules; be available during peak hours of operation and availability to support stores on nights, weekends, holidays, etc., • Basic math skills and proficiency in cash handling, • Team-oriented mentality, • Ability to lift up to 49 pounds, • High School Diploma or equivalentWhat We Offer:, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff pays employees based on market pricing and pay may vary depending on your location. Compensation for U.S. locations is based on a cost of labor index for that geographic area., • Santee, CA: USD $17.65/hr

Job DescriptionJoin the fastest growing outpatient radiology practice in the Nation- SimonMed Imaging! Our commitment to excellence and improving patient care paired with the best in class technology allows us to be an industry leader in the constantly evolving health care environment. Secure your spot now and take advantage of a unique career opportunity to advance your skills while working alongside a dedicated team of board-certified subspecialty radiologists. We can’t wait to meet you! As a Nuclear Medicine PET/CT Technologist at SimonMed, you will be performing diagnostic Nuclear Medicine, CT, and PET/CT exams. You will be trained on the latest PET/CT procedures including but not limited to; Axumin, NETSPOT, Amyloid and Oncology Imaging. You will also be trained on the latest CT technology, including Dual Energy and iterative reconstruction. SimonMed is committed to becoming the Nation’s leading provider for low dose CT. You will gain experience in a variety of specialized exams including but not limited to; Coronary CTAs, Dual Energy Metal Suppression, and Kidney stone quantification.Essential Functions • Establishes and maintains a good rapport and professional relationship with fellow employees, other departments, and facility staff., • Works under general supervision., • Obtains patient history, explains standard procedures, and addresses patient concerns., • Performs a variety of PET/CT procedures by following and verifying referring provider’s orders to provide images, data analysis and patient information for diagnostic interpretation or therapeutic procedures., • Performs Nuclear Medicine and/or PET/CT with a variety of technical procedures applying ionizing radiation for the purpose of detecting pathology., • Performs procedures at a technical level not requiring constant supervision of technical detail., • Produces computerized tomographic scanner radiographs of specific areas as required by the departmental procedures., • Processes data and enhancing digital images using advanced computer technology., • Performs Nuclear Medicine and/or PET/CT procedures at a technical level not requiring constant supervision of technical detail., • Performs those duties directly involved with a variety of technical procedures applying ionizing radiation for the purpose of detecting pathology., • Regulates the equipment used to expose the x-ray film, develops and documents PACS imaging., • Operates equipment safely and maintains SimonMed standards while performing all types of procedures., • Evaluates images to determine the technical quality and calibration of instrumentation., • Provides diagnostic aid to physicians by conducting organ or body scans on patients., • Administers radiopharmaceuticals and medications for patient imaging and therapeutic procedures, • Administers and records isotope dosage in accordance to established departmental protocol., • Observes patient during procedure and reports any abnormal activity., • Familiar with standard concepts, practices and procedures., • Relies on experience and judgment to plan and accomplish goals., • Demonstrates competency in the performance of job related skills appropriate to his/her customer populations and departmental services while providing excellent customer service., • Utilizes and operates equipment and mechanical devices which provide for a functional, effective, and safe environment., • Adheres to policies, procedures, guidelines relative to departmental operations. Other Duties, • Please note this job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice.Benefits, • Your health, happiness and future matters! At SimonMed Imaging, we offer medical, vision and dental insurance, 401(k) eligibility, paid holidays plus PTO, Sick Time, opportunity for growth, and much more!Education, • High School Diploma, • Requires completion of a formal Radiologic Technology training program in AMA approved school., • Bachelor’s degree in a related field (Preferred)License/Certification, • BLS Certification or “Hands–On” CPR certification, • Requires registration as a Certified Technologist Nuclear Medicine by the State, • Requires registration as a Certified Radiologic Technologist by the State, • Requires NMTCB and/or A.R.R.T.(N) certification, • Requires registration as an RT and CT Technologist by the A.R.R.T., • SimonMed Imaging requires valid CPR certificationExperience, • 2 years of experience in radiologyPhysical Demands, • This position may require duties including lifting and carrying up to 40 pounds, sitting for prolonged periods of time, with frequent standing and walking. May be exposed to biohazards and chemicals as outlined in the MSDS Manual; and other hazards/unpleasant working conditions.Dress Attire

Job Description Labor One is hiring Riggers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must possess experience in the trade; knowledge of ship terminology, blueprint reading, job specifications and manuals. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Technically proficient in tasks, work processes, and equipment operation. Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. Creates a working environment for compliant with quality, safety, environmental, and health regulations and policies. Thorough knowledge of equipment used in rigging operations, included but not limited to lifting and moving equipment. Knowledge of rigging testing requirements, proper set up and operation of equipment. Selects cables, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. Attaches pulley and blocks to fixed overhead structures such as beams and ceilings with bolts and clamps. Attaches load with lifting devices such as wires, nylon straps and chains to crane hook. Gives directions to crane operator engaged in hoisting and moving loads to ensure safety of workers and material handled. Sets up cranes hoisting equipment. Safe handling of anchors and chains. Lowers, handles and tests lifeboats. Tests ships cranes using various rigging. Ability to interpret all crane load charts and blueprints. Ability to work any assigned shift and ability to work assigned overtime. May be assigned tasks outside craft as required. Must comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be business like and free of bias, prejudice, and harassment EDUCATION and/or EXPERIENCE Must complete practical demonstration of skills listed above. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations before customers, clients, or employees of organization. MATHEMATICAL SKILLS The ability to add, subtract, multiply, and divide all units of measure, whole numbers, common fractions, and decimals in U.S. and metric conversions. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. Specific requirements include the following: 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Demonstrate the ability to bend, squat crouch, crawl and kneel., 4. Demonstrate the ability to climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Perform prolonged standing (2-3 hours)., 6. Able to work at a variety of levels (ex. Waist, eye, above head)., 7. Demonstrate the ability to safely and appropriately use required tools and equipment., 8. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles., 9. Posses sufficient handgrip and coordination to carry and operate tools and equipment., 10. Ability to utilize personal protective equipment (hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards., 11. Ability to withstand extreme temperatures (cold and hot)., 12. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 13. Able to respond to verbal and audible sounds/commands., 14. Able to utilize adequate visual skills., 15. Ability to work at heights above 12' while working from ladders, scaffolding and/or manlifts., 16. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 17. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 18. Ability to turn head from side to side and about on the vertical axis., 18. Ability to turn body at the waist from side to side and about the vertical axis. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the environment varies from normal office environment to wet and/or humid conditions, outside weather conditions, extreme cold, and extreme heat. The employee is occasionally exposed to moving mechanical parts and high places. The noise level in the shipyard environment is usually loud; office environment is usually low to moderate. The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory. 2nd Shift 40 Hrs. per week/ OT per approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Now Hiring: Remote Associate Attorney | California-Based | No Billables | No Sales New Gig Solutions is excited to partner with a long-established, mission-driven law firm that has been advocating for individuals facing financial hardship since 2011. With a presence in multiple states and a trusted model that consistently delivers results, the firm is expanding to meet continued demand—and is now hiring a remote Associate Attorney based in California. Position: Associate Attorney x 4 Location: Fully Remote (Must reside in California) Compensation: $90,000–$105,000 + Full Benefits Bar Admission: Must be licensed and in good standing with the California Bar Experience: 1–2 years of litigation or negotiation experience About the Firm: Founded in 2011, this firm has helped thousands of working-class clients resolve financial and legal challenges with dignity. They focus on debt resolution, creditor issues, and tenant disputes—work that makes a tangible impact. Their approach is grounded in empathy, fairness, and a genuine commitment to work-life balance. About the Role: This is an excellent opportunity for attorneys seeking meaningful, mission-driven legal work—without the typical pressures of billables, business development, or late nights. You'll be provided with a steady caseload, all necessary remote tools, and full support from an experienced legal team. Key Responsibilities: * Manage client matters from intake through resolution * Negotiate with creditors and opposing counsel * Handle cases involving debt collection, financial hardship, or tenant rights * Use the firm's Salesforce-based system to track progress and manage communications * Collaborate closely with senior attorneys and administrative staff What You Won't Do: * No billable hour requirements * No sales or client acquisition * No fee generation responsibilities * No late nights—standard 9-to-6 schedule with real balance Ideal Candidate Profile: * California Bar license and California residency required * 1–2 years of litigation, negotiation, or relevant legal experience * Background in consumer law, financial disputes, or personal injury is a plus * Strong communication and organizational skills * Committed to a full-time role (not running their own practice on the side) * Passionate about helping underserved or vulnerable populations What You'll Receive: * Competitive salary and benefits package * Fully remote work setup (laptop, dual monitors, keyboard, mouse, etc.) * Access to the firm's Salesforce-based case portal * Consistent, meaningful caseload * Mentorship from an experienced Managing Attorney

Job Description Grow Through Life Counseling is a clinician-led group practice committed to supporting emotional wellness in children, teens, adults, couples, and families across San Diego and Riverside Counties - and now, virtually across California! At Grow Through Life Counseling, you’re not just taking a job - you’re joining a collaborative, growth-focused team that values your work and your well-being. We were founded in 2012 to provide high-quality mental health support to families in San Diego. From the beginning, our clinicians have shared this vision - dedicated to improving the lives of children, teens, and families. We strive to make a positive impact on clients' lives and contribute to the community. Apply now to start making a difference in our community! Why Join Grow Through Life Counseling? * Clinician-led and family-centered * Supportive, collaborative culture * Career advancement and clinical leadership pathways * Competitive compensation with full-time benefits Your role as a Recruiting & Operations Coordinator: You will be primarily responsible for coordinating all hiring strategic initiatives and managing the operations of office maintenance for our 9 offices around San Diego and Riverside Counties. All the responsibilities we will trust you with: Recruiting * Key member of the hiring team and facilitating the day-to-day operations of recruitment to attract skilled and diverse candidates * Collaborate with the hiring team to manage the recruitment process including creating job descriptions, manage all job postings, screen resumes, schedule/conduct interviews, manage timely communication with applicants, conduct reference checks, and extend offers of employment * Design and implement data-driven recruiting planning and frameworks to enhance decision-making, efficiency, and the candidate experience * Utilize expertise in building high-volume hiring pipelines * Travel to 9 of the practice locations around San Diego and Riverside Counties to facilitate interviews as needed. Collaborate with leadership to maintain and provide great experience for candidates and new hires * Assist in onboarding new employees (e.g., supplies, desk setup, welcome bags) * Follows established clinical protocols and procedures at all times * Represent the practice in a positive and professional manner at all times * Other duties as assigned Office Operations * Oversee general office operations and ensure a clean, functional workspace for all locations * Maintain office supplies inventory for our 9 locations * Track and reconcile budgets for office supplies * Collaborate with clinical leadership to identify and prioritize office-related needs, and serve as the primary liaison with property management, janitorial staff and maintenance personnel to ensure timely resolution of office issues to ensure smooth operations * Support planning of employee events and retention initiatives, including coordinating office celebrations such as birthdays, work anniversaries, and team-building activities that foster a positive and inclusive workplace culture * Assist staff in troubleshooting common computer issues or concerns * Maintain office security by assisting with office access and vendor entry to office spaces * Collaborate with other departments within the practice to maintain and provide great client care experience for client(s) You will be required to meet the following: * Bachelor's degree preferred * Travel to all 9 office locations throughout San Diego and Riverside Counties using reliable means of transportation * Understanding of recruitment employment laws * Demonstrated ability to learn and grasp new concepts, technologies, and procedures quickly * Ability to thrive in a fast-paced environment and adapt to evolving practice needs * Demonstrated curiosity and a proactive attitude towards learning and skill development * Proficiency and knowledge to provide technical support and resolve general IT issues * Able to work extended hours as needed * Proficient computer skills in Google Workspace and EHRs * General knowledge of office skills, use of office equipment (copier, laser printers, fax machine, telephones, computers) * Must be able to use initiative and independent judgment within established guidelines * Must possess effective written and oral communication and social skills * Excellent written and verbal skills. Proven ability to correctly use punctuation and grammar * Bilingual fluency a plus * Possess high degree of discretion, integrity, professionalism, and accountability * Professional image and demeanor * Exceptional time management and organizational skills with capacity to handle high volumes of detailed work, multi-task and manage project deadlines * Being consistent, punctual, and have reliable attendance * Having a strong ability to communicate effectively and work well with others in a collaborative, respectful manner * Minimum physical requirements: able to lift and transport up to 25 pounds Compensation: The base hourly rate range for this full-time position is $23 - $27. As a candidate for this position, your hourly rate and related elements of compensation will be contingent upon your work experience, education, job-related skills and any other factors the Grow Through Life Counseling considers relevant to the hiring decision for this position. In addition to the base pay rate, we believe in providing a very competitive and generous compensation and benefits package for our employees. Benefits include, but are not limited to: * Medical, vision & dental insurance * 401(k) with employer match * generous paid time off (PTO) and holiday program * Company-wide sponsored events such as outings and celebrations * and more! All benefits are subject to eligibility requirements and the terms of official plan documents which may be modified or amended at any given time. Grow Through Life Counseling is an Equal Opportunity Employer.

Job Description Labor One is hiring Sheetmetal Fitter Improvers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:Under supervision of a supervisor or Journeyman, this position is responsible for the removal, assembly, installation and repair of sheetmetal products and equipment such as HVAC ducting, furniture, nonstructural bulkhead systems and ceiling systems in berthing, heads, living spaces, and food service areas on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item., 5. Must be willing and able to carry out written and verbal instructions provided by the supervisor and journeyman., 6. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 7. Must have experience repairing and installing berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors., 8. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 10. Four (4) years of related experience, one (2) of the years in a maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, being aware of the added responsibility for fire prevention., 5. Complete daily work assignments and provide status of unfinished work to the supervisor and journeyman., 6. Assist with documenting Objective Quality Evidence (OQE) as required by the work specifications., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Must be available for day or night shift. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Sheetmetal Fitters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, sheet metal repairs and installation on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. Repairs and installation include shipboard and shop tasks required to plan, layout, fabrication, and assemble various sheetmetal structures throughout the ship. The position requires a comprehensive understanding of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must possess the ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the structural supervisor, improvers, and helpers., 6. Must be able to read and interpret structural drawings, sketches, and specifications., 7. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Must have experience repairing and installing shipboard habitability spaces including: berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors in accordance with drawings, specifications, and sketches., 9. Must understand the principle of balancing air systems including taking proper readings and documenting the results., 10. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 11. Must have experience tack welding using SMAW or GMAW., 12. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 13. Six (6) years of related experience, three (3) of which were in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 3. Work shifts and overtime as assigned., 3. Keeping the work area clean and safe at all times, especially at the end of the shift., 4. Complete daily work assignments and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 7. Carry out written and verbal instructions., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Outside Machinists for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to work from Process Control Procedures (PCP)., 6. Must be able to use precision measurement tools., 7. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 8. Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment., 9. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 10. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 11. Must understand laser alignment., 12. Must understand reverse indicator alignment procedures., 13. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 15. Six (6) years of machinist experience, two (2) of which in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned., 3. Keep the work area clean and safe at all times, especially at the end of the shift., 4. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Start your career in a rewarding, creative atmosphere with our award-winning teams! We are currently seeking entry-level ARCHITECTURAL DESIGNER / DRAFTERS in our SAN DIEGO, CA location. Working alongside other team members, this professional develops design or technical solutions under general supervision. These are not remote positions and require being onsite in the office a minimum of 3 days per week. • Undertakes a variety of assignments requiring the application of standard architectural techniques for small projects or selected segments of a larger project., • Performs design layouts and features, which require researching, compiling, and recording information for assigned project work., • Reviews drawings and designs to ensure adherence to established specifications and standards, and implements any changes as directed, • Assists project teams and other staff members as required. Ideal candidates will meet the following requirements:, • Completion of Bachelor’s in Architecture from an NAAB accredited program, • Demonstrated skills and talent in Revit / BIM, AutoCAD, SketchUp modeling, Adobe Photoshop, and preparation of presentation materials, • Excellent problem solver and independent thinker with good listening skills and strong follow-through, • Strong verbal and graphic communication, organizational and collaborative skills, • Ability to work independently and in a team environment, • Commitment to their own professional growth as designer, architect, or planner., • Commitment to obtaining licensure preferred, • Must be legally authorized to work for any employer in the United States without any restrictions. Please note that visa sponsorship is not offered for this position. We offer a competitive compensation package based on experience and qualifications. Excellent benefits include medical, dental, and vision coverage. We also offer the opportunity to participate in a pre-tax Flexible Spending plans for medical, childcare, and commuter expenses, Employee Stock Ownership Plan, and 401k. Salary range: $71,000 - $72,000. Placement within this pay range will be determined by factors such as education, qualifications, project complexity and/or experience. The maximum is reserved for candidates who currently meet all job requirements. We believe in the importance of pay equity and consider internal equity of our current team members as part of any final offer. DAHLIN is a diverse, award-winning architecture, planning, and interiors firm practice with offices located throughout the Western United States. We offer more than 45 years of experience building communities where we live and work, driven by the vision of creating places that promote human fulfillment and well-being. This same Passion for Place® starts with our own working environment - a positive community where people thrive. Please visit our website () to learn more. Please note... Including a link to an online portfolio is a huge plus! We regret that due to the large volume of inquiries, we are unable to accept phone calls regarding the status of applications. We'll be sure to contact you if we need more information. Apply now! #LI-Hybrid As an Equal Opportunity Employer, we are committed to welcoming and supporting a diverse community of professionals. As such, women and people of color are especially encouraged to apply. Our firm participates in E-Verify. DAHLIN is committed to integrity in hiring. Please click here for an important notice on Recruitment Fraud. DAHLIN values your privacy. Please click here for additional information. We do not accept resumes from recruiters, placement agencies, or other staffing vendors who have not signed an agreement with us. Unsolicited resumes will be ineligible for referral fees. Powered by JazzHR JYUp6SgocV

Job Description TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions. At TrellisWare, we connect passion with purpose and together we make an impact- on our careers, our company, and the world. And you can too. If you love to innovate and collaborate in a dynamic environment where boundaries are being pushed, you belong at TrellisWare. Where the opportunity to serve is not a challenge but a gift. Where you're never going alone. Because there's too much at stake to go solo. Our people are our primary asset, and we believe that strong, cohesive teams are the key to leveraging brilliant individual contributions to even greater achievements. The Engineering Team is seeking a Mechanical Engineering Manager. You would be responsible for leading a team of Mechanical Engineers as they conceive, develop, produce, and maintain radio products, mechanical solutions for handheld tactical radios, accessories, and other communications equipment through all stages of their lifecycle. This position is responsible for the leadership and management of TrellisWare's internal mechanical engineering team as well as outside design services such as industrial design. It oversees all mechanical engineering activities that guide and support new products through concept, design, production, and end of life. The team's goals include the full lifecycle of mechanical design, Industrial design, rapid prototyping, EMI, and environmental testing. TrellisWare Managers are responsible for building strong, cohesive teams by hiring top-tier talent, developing key skills within their teams, and fostering a culture of ownership and accountability within a positive, supportive, and flexible environment. They inspire execution amongst their teams and role model TrellisWare's core values of delivering excellence, empowering people, and pushing boundaries. The essential duties and responsibilities include: • Provide leadership, mentorship, and expertise to the Mechanical Team., • Take ownership of the mechanical design of radio products and accessories., • Define, derive, and document mechanical system requirements., • Explore feasibility and applicability of new technologies, materials, processes to add to our mechanical design toolkit on both new and existing designs., • Oversee creation and release of fabrication and assembly drawings., • Creates development plans to forecast resource requirements (labor and material) through product release as well as estimation of product unit cost. Actively manages team to drive execution to the plan. Actively maintains plan to reflect actual execution., • Design, document, and execute mechanical engineering development processes., • Oversee creation and release of assembly drawings., • Manage external vendors, including industrial design firms, rapid prototype vendors, and full production vendors., • Provide functional management to the mechanical engineering team., • Provide coaching and mentoring to junior team-members., • Plan and execute conceptual and detailed development efforts., • Define and develop current and future competencies required by team members in order to maintain TrellisWare's competitive advantage and build individual and organizational capabilities., • Develops and implements strategies for cross-team and cross-department communication., • Inspire execution according to TrellisWare values (delivering excellence, empowering people and pushing boundaries)., • Support TrellisWare development processes and continuously improve them., • Establishes group mission and goals that are aligned with organizational vision, mission, values, and strategy., • Hires, engages, and retains the best people., • Clarifies goals and expectations for teams performance (removes obstacles and provides necessary resources and feedback) in order to achieve agreed targets and results, and synergistically supports departmental success., • Defines and develops current and future competencies required by team members in order to maintain our competitive advantage and build individual and organizational capabilities., • Develops relationships with team members built on trust and respect., • Bachelor's degree in mechanical engineering or related field of study required. Master's degree a plus., • At least 10 years of applicable product development and manufacturing engineering experience for high technology electronics/communication products., • Experience designing portable, rugged devices that require balance between ruggedness, size/weight, and recurring cost. Experience with radios and/or DoD is a plus., • Understand various material (metal, plastic), fabrication processes (CNC machining, casting, molding, injection etc) and their cost/performance tradeoffs, • Experience with electro-mechanical design considerations., • Experience interfacing with Industrial Designers is a requirement. Personal Industrial Design skills are a plus., • Ability to manage external vendors, including industrial design firms, rapid prototype vendors, and full production vendors., • Understand low volume, medium volume, and high-volume product design considerations., • Design for manufacturing/Concurrent Engineering experiences., • Experience in using Solidworks and/or other 3D CAD software., • Expertise in thermal modeling and thermal design considerations., • Ability to foster a culture of hard work, trust, and respect that is consistent with company values., • Ability to renegotiate team commitments and manage customer expectations as priorities change., • Sound business acumen and advocate for continuous improvement of processes and procedures., • Strong interpersonal skills and emotional intelligence., • Ability to mentor and coach junior employees in professional development and process improvement., • Ability to evaluate performance against defined goals and effectively communicate areas of growth/improvement for direct reports., • Strong analytical and problem-solving skills., • Effective execution and decision making., • Champion of change and promotes innovation., • Able to frequently sit, stand, walk, use hands to fingers, handle or feel, reach within hands and arm's length, stoop, kneel, and crouch, talk and hear., • Regularly required to sit for extended periods of time; frequently required to use office equipment such as PC, printer, telephone, etc., • Able to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Disclaimer - The above statements are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in the job description restricts the company's right to change, assign, or reassign duties and responsibilities at any time for any reason. TrellisWare Technologies pays competitively according to the market in an individual's geographic location, in addition to their qualifications and experience. The posted range is annually and for individuals located in the San Diego, CA area. San Diego, California Pay Range$180,000—$210,000 USD Check out the Careers page for more information about working at TrellisWare Technologies.

Job Description Company Background: Founded in 1940 and headquartered in San Francisco, Degenkolb Engineers has more than eight decades of commitment to innovation, client service, and life-long learning. We deliver customized structural solutions in a variety of practice areas such as healthcare, education, science and technology, forensics, construction engineering, and federal buildings. We address every project need whether those needs are meeting stringent codes, meeting a bottom line, sticking to a hard construction schedule, or developing a structural system that creates a landmark. We’re hiring at the Senior Engineer level in our San Diego, LA, and Orange locations. If you are interested in joining our team and do not see your desired position on our "Job Openings" page, please send an email with a targeted cover letter expressing interest to: Position Description: Lead structural design from concept through construction, applying advanced engineering principles to complex building projects in high seismic regions. Collaborate with clients and guide project teams to deliver innovative, practical solutions. Ideal Candidate: Experienced, licensed California Structural Engineer with 5–7+ years in seismic design and diverse structural systems. Passionate about mentoring junior staff and driving projects forward with technical expertise and client focus. Compensation and Benefits: The annual salary range for this position, across the listed offices, generally ranges between $120,000 and $137,000. This range is a good faith estimate provided pursuant to the California Pay Transparency Law. Actual pay rates will be based on various factors, including company geographic differentials, education level and candidate qualifications. Benefits include health and life insurance, commuter benefits, paid parental leave, 401(k) with company Profit Sharing contribution, employee ownership in a privately held stock plan, financial support for professional activities, company holidays, and a generous paid time off program. Culture: We offer a flexible hybrid work schedule and a fun office environment! Our firm is highly collaborative and filled with experts who are united by a passion for industry involvement, pride in company ownership, and respect for our personal lives. You will benefit from focused professional development within a highly supportive and transparent team environment. We also offer opportunities for committee participation and leadership, variety in work assignments, and a pay scale set at the 75th market percentile. To learn more about the company, please visit our website using the link below: Job Summary: Facilitate the design and engineering of structural systems for building structures and facilities from pre-schematic phase through construction closeout with limited direction from senior technical staff. Responsibilities: • Determine project design decisions based on client and project requirements, such as load requirements, governing codes, architectural constraints, operational constraints, fabrication and erection requirements., • Apply advanced theoretical knowledge of civil and structural engineering principles and concepts., • Oversee work of junior engineers, designers and/or drafters in production of structural construction documents including drawings, specifications, bidding, and construction administration for projects., • Develop technical skills of junior staff with empathy and a genuine interest in the career progression of colleagues., • Perform structural calculations by applying appropriate system concepts and layouts., • Review RFI’s, submittals, and other construction related documents., • Manage multiple projects of moderate size or portions of major projects with minimal supervision from senior technical staff., • Participate in developing client proposals including preparing scope, budgets, and schedules for assignments., • Maintain close relationship with client during project development, execution, and completion., • Participate in client and design team meetings as well as plan review and approval processes., • Master's Degree in Structural Engineering and 5 - 7+ years relevant experience with a stable history., • California Professional Civil or Structural Engineering license., • Experience in the seismic design, seismic evaluation and retrofit of existing buildings in regions of high seismicity., • Ability to perform complex structural calculations such as linear and nonlinear analysis with minimal direction., • Demonstrated design skills with steel, concrete, masonry, and wood structures., • Familiarity with California Building Codes and ASCE 41 Standards., • Knowledge of some or all modeling applications: ETABS, RISA, RAM, Revit, MathCAD, SAP2000, AutoCAD, and TeklaDesired Qualifications:, • California Structural Engineer license., • Active participation in professional activities related to structural or earthquake engineering., • Proficiency with one or more of the following software programs: Python, Rhino, or Grasshopper., • Participation in project teams for delivering complex HCAI projects., • Experience supervising, coordinating or mentoring junior staff. Application Process: Click the Apply Now button. Please submit your resume and a targeted cover letter describing the alignment of your background with this position. Degenkolb Engineers complies with Equal Opportunity Employer guidelines, meaning we do not discriminate in employment matters on the basis of race, color, religion, gender, national origin, age, military service eligibility, veteran status, sexual orientation, marital status, disability, or any other protected class. We are committed to fostering an inclusive workplace where a wide range of perspectives, skills, and experiences are welcomed and respected.

Job DescriptionReady to make a meaningful impact? At Brighton Jones, we’re a purpose-driven, client-focused team committed to helping individuals live richer lives. As one of the largest RIAs in the nation, we’ve built a culture of continuous growth, collaboration, and community—recognized with 15 consecutive “Best Places to Work” awards including Inc.com’s 2025 list, as well as national honors for community impact. We lead the industry in aligning wealth, passion, and purpose to help our clients thrive. With over $30 billion in assets under advisement, 300+ teammates nationwide, and a dynamic, team-based approach, we’re growing fast—and we’re looking for driven, curious individuals to join our #OneTeam. Do you have a passion for helping others? Are you naturally curious, comfortable working in a team-based environment and committed to exceeding client expectations? If so, we should talk. We are expanding to new markets and looking for Lead Advisors who have their CFP® and a passion for helping clients. We're currently looking to expand to San Diego. Here’s where you come in: as part of our mission to help clients, colleagues, and the global community live a richer life, we’re ready to extend our reach to new markets. We want you to embody our culture, serving clients and leveraging our centralized client experience, marketing, business development and operations teams. Take our Values in Action Self-Assessment to see how our values align! Your Role: • Acts as a Personal CFO for existing clients (where applicable) and new clients; leads the client relationship, delivers an exceptional experience, and designs, implements and manages the wealth management plan that supports their passions and purpose - their “Life Plan”, • Leverages internal and external resources to achieve client objectives in such areas as Investment Management, Estate Planning, Tax Planning, Risk Management, and General Planning, • Communicates our unique value proposition to prospective clients and works to establish Brighton Jones as their trusted financial advisor, • Proactively develops and expands relationships within the community, • Cultivates and develops deep relationships with custodial retail branches in collaboration with the national team, • Creates opportunities and represents Brighton Jones at public speaking events including community events, industry events, etc., • Leads a local service team with deep collaboration to ensure client retention and satisfaction is high with a relentless focus on remarkable service. What Will Set You Apart:, • Candidates must have a four-year degree, • Required professional designation: CFP®, CPA, CFA, or JD. Candidates who do not hold the CFP® designation but hold the CPA, CFA, or JD must obtain the Series 65 (or equivalent) within 120 days of employment., • 6+ years in financial and/or estate planning related work, preferably at a professional financial services company or wealth management firm, • Expertise in estate, tax, retirement, insurance, investment, and cash flow/capital needs planning analysis, • Unquestioned commitment to integrity in personal and professional activities, • Highly motivated with ability to function well in a fast-paced environment, • Self-starter by nature, • Excellent organizational, leadership, communication and presentation skills, • Able to manage heavy workloads and projects, many on a time-sensitive basis, as well as interacting with tight-knit team of professionals with a range of financial and tax activities., • This role is part of an emerging market and will be considered remote until an office space is secured. Brighton Jones is a 'work-from-office' culture with a lot of flexibility. This is a full-time, and exempt position.Compensation:, • Pay: $150K – $350K+ (base salary + variable compensation based on revenue growth), • Profit share: Additional opportunities for discretionary year-end profit sharing, • Equity: Restricted Equity Units granted at hire, and an expedited opportunity to convert to Partner status at vestOwnership & Financial Wellbeing, • Fully paid medical, dental, and vision coverage for employees, • 401(k) with 100% match up to 3% of annual compensation, • Equity ownership opportunities for every employee, • New Business Incentive Program, • Generous employee referral bonus, • Cell phone data reimbursement, • Financial planning services discount for employees and immediate family members Time & Flexibility, • Minimum 3 weeks PTO starting Day 1, • Winter Break, Summer Friday flex-days, and 10 paid holidays, • Unlimited Volunteer Time Off plus company grant matching, • Heavily subsidized transit Growth & Development, • 100% reimbursement for required training, certifications, licensing, and dues, • Personal career development plans, • Richer Life Business Partner (coaching for all employees), • Mindful Emotional & Social Intelligence training, • Annual professional & personal wellbeing stipend Connection & Community, • Quarterly team-building events, • Regular social events, • Employee-led book clubs, committees, and affinity groups Family & Milestones, • Paid Parental leave (13 weeks for birthing parent and 6 weeks for non-birthing parent), • Adoption benefits

Job Description Please note: This posting is for informational purposes only and does not constitute an official job application. To be considered for employment, all candidates must submit their application directly through official Cox careers website. Applicants who complete Applications that are received through third-party postings, social media, or other channels will be invited to submit an official Application through the company’s career site. SIGN ON BONUS of $2000 for eligible external candidates & $1000 for eligible internal candidates. Paid in 2 increments: The first installment following 90 days of continuous employment. The second installment following 180 days of employment. The Residential Outside Sales Representative role is an opportunity to channel your formidable energy and entrepreneurial swagger into extraordinary sales experiences, helping customers from the starting gate to the finish line with our cutting-edge products and services. In this consultative sales role, you will provide solutions by selling Cox data, video, & mobile services to residential customers while managing your assigned territory. Ambitious? To you, meeting new people and closing deals are second nature, and a little friendly competition is your favorite fuel. If this sounds like someone you see in the mirror each morning, then you may be a solid contender for a gig as a Residential Outside Sales Representative. We are Cox Communications, part of the Cox family of businesses, and our teams are driving a wave of innovation and reimagining how we connect with our customers. What You’ll Do As a Residential Outside Sales Representative, you’ll have the opportunity to generate new leads, sales, and upgrades. That means becoming a wiz at sales prospecting, referrals, partner relationships, and door-to-door canvassing and networking through an assigned territory. You’ll be the architect of your own face-to-face sales presentations, from creation to delivery, and you’ll be involved in touchpoints from assessing residential customer's needs to closing the sale. You’ll also: • Get to know and grow with homeowner associations, multi-dwelling unit managers, leasing agents and others to help generate sales., • Get to assist with training new hires, team with other departments, and partner with leadership to unearth new approaches to growth., • Work a shift that will include evening and weekend hours to maximize customer contact opportunities What’s In It For You As part of a customer loyalty-driven team, highly motivated individuals could receive a targeted annual amount of $76,754. This reflects the full-time salary base rate of at least $40,000 and target commission is $3,113 a month. Targeted total compensation may vary based on factors including, but not limited to: location, candidate experience level, and successful completion of minimum sales targets. There is potential to earn up to and beyond $109,968 annually as a high performer. Employees are provided with a two-month ramp-up period during which they earn full commission, allowing them time to adjust to their new role. Cox Communications rewards the talented, hard-working folks that help drive our growth. We’ve created an exceptional salary package, plus additional incentives including the highly-sought-after Winner’s Circle reward for top salespeople. We are an inclusive, pro-sales environment where different perspectives are valued and celebrated. Tools and training to up your game? We’ve got them. And we offer a work/life balance that allows you to enjoy things like family, friends, and lots of flexibility. We believe in taking good care of our team, so you’ll also have access to benefits like a 401(K) with company match, quality healthcare & life insurance, performance and recognition rewards for top salespeople, and coverage of travel expenses. We also know that everyone has unique concerns and priorities as we navigate life and manage our overall physical, mental and financial well-being, so we offer access to a lifestyle coach, paid time off to volunteer, employee discounts and even pet insurance (cool, right)? Bottom line, we take good care of our employees. Want to join us? Here’s who we are looking for... Who You Are You’re energetic; always on the move. You love a fast-paced work environment, and you like being outside and building relationships in the field. You relish new challenges, you’re competitive, and you’re ready to conquer the world. You’re also an ethical, organized and analytical person who enjoys meeting and working with diverse groups of people. Minimum Qualifications • High school diploma, GED or up to 2 years of relevant work experience, • Ability to qualify for Certifications and licenses, as required by state and municipal laws, to sell Home Security, • Proficient knowledge of and ability to operate a Smart Phone, iPad and a computer, • Ability to work outside in all types of weather: heat, cold, rain, snow, etc, • Ability to walk 1 1⁄2 or more miles a day and up and down stairs within your residential territory, • Knowledge of local market with established local contacts, • 1+ years of outside/field sales/door-to-door or related experience with quota requirements Join the Cox family of businesses and make your mark today! Compensation: Compensation includes a base salary of $33,000.00 - $49,400.00. The salary rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's experience. In addition to the salary range identified herein, this role is also eligible for an annual incentive/commission target of $37,368.00. Benefits: The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company’s needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future. About Cox Communications Cox Communications is the largest private telecom company in America, serving six million homes and businesses. That’s a lot, but we also proudly serve our employees. Our benefits and our award-winning culture are just two of the things that make Cox a coveted place to work. If you’re interested in bringing people closer through broadband, smart home tech and more, join Cox Communications today! About Cox Cox empowers employees to build a better future and has been doing so for over 120 years. With exciting investments and innovations across transportation, communications, cleantech and healthcare, our family of businesses – which includes Cox Automotive and Cox Communications – is forging a better future for us all. Ready to make your mark? Join us today! Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual’s age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Statement to ALL Third-Party Agencies and Similar Organizations: Cox accepts resumes only from agencies with which we formally engage their services. Please do not forward resumes to our applicant tracking system, Cox employees, Cox hiring manager, or send to any Cox facility. Cox is not responsible for any fees or charges associated with unsolicited resumes. Company DescriptionCox Communications rewards the talented, hard-working folks that help drive our growth. We’ve created an exceptional salary package, plus additional incentives including the highly-sought-after Winner’s Circle reward for top salespeople. We are an inclusive, pro-sales environment where different perspectives are valued and celebrated. Tools and training to up your game? We’ve got them. And we offer a work/life balance that allows you to enjoy things like family, friends, and lots of flexibility.Cox Communications rewards the talented, hard-working folks that help drive our growth. We’ve created an exceptional salary package, plus additional incentives including the highly-sought-after Winner’s Circle reward for top salespeople. We are an inclusive, pro-sales environment where different perspectives are valued and celebrated. Tools and training to up your game? We’ve got them. And we offer a work/life balance that allows you to enjoy things like family, friends, and lots of flexibility.

Job DescriptionURGENT HIRING: On-Demand Behavioral Health Specialist | $55+/Hr | Flexible Schedule!Make an Immediate Impact in Critical Moments. Are you a Licensed Behavioral Health Therapist (LCSW, LMFT, LMHC, LPC) looking for a flexible, impactful role? Blue Rose is seeking mission-driven professionals to provide behavioral health support for unaccompanied minors during surge operations and backfill needs in San Diego, CA. What We Offer: • Competitive Pay: Starting at $55+/hour (commensurate with experience), • Flexible, On-Demand Role: Work as needed to support critical operations, • Mission-Driven Impact: Provide vital support for vulnerable youth, • Collaborative Team Environment: Work alongside dedicated mental health professionals, • 1099 Contractor Position | ON-SITE RoleYour Role: Support When It’s Needed Most, • Provide mental health support & crisis intervention for unaccompanied minors, • Conduct behavioral assessments & mental health evaluations to identify trauma-related symptoms, • Ensure child safety & well-being by monitoring interactions and assessing emotional distress, • Apply trauma-informed care strategies to help minors develop healthier coping mechanisms, • Collaborate with facility staff to ensure culturally sensitive, effective care, • Maintain accurate documentation & shift reportsWho We Need:, • Master’s degree or higher in Behavioral Health (MS/MSW/MA), • Independent License in California (LCSW, LMFT, LMHC, LPC), • Strong crisis intervention & trauma-informed care expertise, • Excellent interpersonal & communication skills APPLY NOW & take action when it matters most! #MentalHealthJobs #HiringNow #BehavioralHealth #LicensedTherapist #TraumaInformedCare #MakeAnImpact Text ODBHSSD to 202-998-6455 to apply

Job DescriptionBenefits: • Competitive salary, • Paid time off, • 401(k) matching, • Health insurance, • Opportunity for advancement Position Overview Join our growing team as a Water Damage Restoration Technician and Restoration Laborer! We specialize in water damage restoration, fire damage repair, mold remediation, and emergency restoration services. No experience required - we provide comprehensive on-the-job training and professional development. About Us Certified Restoration Mission is San Diego's leading disaster restoration company with 30+ years of experience serving residential and commercial clients across the region. We are IICRC Certified and specialize in water damage restoration, fire damage repair, mold remediation, and 24/7 emergency services. We're hiring driven, physically capable individuals who want to build a real career in the restoration trades no prior experience needed. If you're looking for entry-level construction jobs in San Diego with room to grow, this is it. What We DoAs a Water Damage Restoration Technician / Restoration Laborer, you'll be on the front lines of disaster recovery helping families and businesses get back on their feet. Day-to-day responsibilities include: * • Water extraction, structural drying, and dehumidification, • Demolition of water-damaged materials (drywall, flooring, insulation), • Mold remediation and moisture control procedures, • Content cleaning, pack-out services, and debris removal, • Operating restoration equipment: air movers, dehumidifiers, moisture meters, • Vehicle and equipment maintenance, • Job site cleanup and warehouse organization, • Inventory management and supply loading, • Upholding OSHA safety standards at all times, • High school diploma or equivalent (preferred), • Valid driver's license with a clean driving record, • Ability to lift 50+ lbs (fitness assessment required), • FBI background check clearance, • Reliable transportation and consistent attendance, • Background in construction, trades, renovation, or demolition, • Prior restoration industry or water mitigation experience, • A strong problem-solver who stays calm under pressure, • Detail-oriented and take pride in your work, • A team player with a positive attitude, • Eager to learn, grow, and build a long-term careerWhy Choose Us?, • Established company with 30+ years in business, • Comprehensive training program - no experience needed, • Career advancement opportunities, • Professional development and skill building, • Stable employment with growth potential, • Meaningful work helping families during disasters, • Team-oriented work environment San Diego-based - serve your local community Industry Keywords & Services: Water Damage Restoration | Fire Damage Repair | Mold Remediation | Emergency Services | Property Restoration | Disaster Recovery | Structural Drying | Water Extraction | Flood Cleanup | Storm Damage | Insurance Claims | Residential Restoration | Commercial Restoration | 24/7 Service | IICRC Certified | Construction | Trades | Entry Level | On-the-Job Training Ready to start a rewarding career in restoration? We're looking for analytical, calm, and strong problem-solvers who take pride in helping others during their most challenging moments. Apply now !

Job DescriptionThis is a rare opportunity to shape the future of corporate campus workplace design at a national scale. We are seeking a Market Sector Leader to help Cuningham grow and define a Corporate Campus practice. This role is designed for an accomplished design and business leader, someone who is already recognized as a thought leader in the corporate workplace sector and is ready to leverage that expertise on a broader platform. You will have the mandate, visibility, and support to influence how corporate campuses evolve, from culture and performance to sustainability, flexibility, and long-term value. This is a role for someone who wants to leave a lasting imprint on both the built environment and the profession itself. Why This Role, Why Now • A platform to define and grow a market-leading corporate campus practice., • The opportunity to influence strategy, design culture, and market presence at the highest level., • Geographic flexibility with strong regional hubs and national reach., • A firm culture that values design excellence, intellectual leadership, and strategic thinking. Your ImpactAs Market Sector Leader, you will operate at the intersection of design excellence, market strategy, and client leadership, with responsibility for shaping a nationally relevant and future-focused workplace practice. Market & Vision Leadership, • Set the vision and strategic direction for the Corporate Campus Workplace sector., • Anticipate and respond to evolving trends in work, technology, sustainability, and corporate real estate., • Elevate the firm’s profile as a leader in corporate campus innovation through thought leadership, speaking, writing, and client engagement.Strategic Growth & Business Leadership, • Create and lead multi-year business plans that drive growth, differentiation, and market leadership., • Shape business development strategies that align design vision with client and market opportunity., • Cultivate executive-level client relationships and act as a trusted advisor to corporate leadership teams., • Partner with firm leadership to meet and exceed revenue, backlog, and performance goals.Client Influence & Industry Presence, • Serve as a recognized voice in the corporate campus and workplace sector., • Build enduring client partnerships that result in repeat work and expanded engagements., • Strengthen strategic relationships with developers, consultants, contractors, and industry organizations.Talent, Culture & Mentorship, • Serve as a recognized voice in the corporate campus and workplace sector., • Build enduring client partnerships that result in repeat work and expanded engagements., • Strengthen strategic relationships with developers, consultants, contractors, and industry organizations.Who You Are, • 20+ years of experience specializing in corporate campus and workplace architecture., • Widely regarded as a thought leader by peers and clients within the corporate workplace sector., • Proven record of designing and delivering award-winning corporate campus projects., • Demonstrated success in business planning, practice building, and business development strategy., • Deeply knowledgeable about design, workplace, real estate, and business trends shaping the future of work., • Creative yet analytical; visionary yet grounded; confident yet collaborative., • Experienced communicator who can inspire teams and earn trust at the executive level., • Licensed architect preferred (or ability to obtain licensure). Cuningham is an Equal Opportunity/Affirmative Action Employer and values the strength diversity brings to the workplace when combined with equity and justice. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, marital status, age, genetic information, national origin, disability, military, or veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Labor One is Now Hiring Pipefitters for San Diego, CA Shipyard Job Description A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications. The Pipe Fitter journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Long term project Housing assistance available Per-diem available for those that qualify Se Habla Español – Pipe fitters para proyecto en San Diego, CA QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship construction., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 7. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 8. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 10. Must at have at least Three (3) years of pipefitting shipyard experience.

Job DescriptionThe Retail Sales Associate is responsible for providing an excellent customer experience and performing duties as assigned including, but not limited to, cashier, sales floor merchandising, replenishment, receiving and e-commerce fulfillment. Responsibilities: • Model company values in all actions, communication and decision-making, • Maintain store standards by assisting with stocking, merchandising and e-commerce operations recovering the store to maintain cleanliness; and completing various operational projects/tasks, • Performs any other duties as directed by management, • Consistently create a positive customer experience through the utilization of the sales and customer service programs, • Educate and enroll customers into BevMo!’s ClubBev Program and the Gopuff App., • Use product knowledge and BevMo! training to make product recommendations to customer, • Provide the customer with solutions, such as product substitutions or special ordering a product when applicable, • Pick and pack items on a per order basis for dispatch to customers, • Ability to ensure accuracy of items picked/packed, • Clean and organize warehouseRequirements:, • Must be 21 years of age, • Retail, e-commerce or warehouse experience is preferred, • Communication: Provide the information required by others in a concise, direct, and unambiguous way. Strive to ensure that the receiver clearly understands the specifics of the message and are able to listen to, receive, and understand messages conveyed by others, • Driving Results: Motivate individuals to achieve and exceed goals by establishing accountabilities, clarifying performance expectations, agreeing to high standards and measures, monitoring and reviewing performance, and providing timely and relevant feedback., • Process Management: Take a systematic approach in contributing to making the company’s workflow more effective, efficient, and capable of adapting to an ever-changing environment, • Collaboration and Teamwork: Work interdependently and collaboratively with others to achieve mutual goals. Subordinate individual aims in the interest of working with others in a way that promotes and encourages each person’s contributions toward achieving optimal outcomesWhat We Offer, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay, • Gopuff/Bevmo! pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • Chula Vista, CA: $16.90/hr

Job DescriptionThe Retail Sales Associate is responsible for providing an excellent customer experience and performing duties as assigned including, but not limited to, cashier, sales floor merchandising, replenishment, receiving and e-commerce fulfillment. Responsibilities: • Model company values in all actions, communication and decision-making, • Maintain store standards by assisting with stocking, merchandising and e-commerce operations recovering the store to maintain cleanliness; and completing various operational projects/tasks, • Performs any other duties as directed by management, • Consistently create a positive customer experience through the utilization of the sales and customer service programs, • Educate and enroll customers into BevMo!’s ClubBev Program and the Gopuff App., • Use product knowledge and BevMo! training to make product recommendations to customer, • Provide the customer with solutions, such as product substitutions or special ordering a product when applicable, • Pick and pack items on a per order basis for dispatch to customers, • Ability to ensure accuracy of items picked/packed, • Clean and organize warehouseRequirements:, • Must be 21 years of age, • Retail, e-commerce or warehouse experience is preferred, • Communication: Provide the information required by others in a concise, direct, and unambiguous way. Strive to ensure that the receiver clearly understands the specifics of the message and are able to listen to, receive, and understand messages conveyed by others, • Driving Results: Motivate individuals to achieve and exceed goals by establishing accountabilities, clarifying performance expectations, agreeing to high standards and measures, monitoring and reviewing performance, and providing timely and relevant feedback., • Process Management: Take a systematic approach in contributing to making the company’s workflow more effective, efficient, and capable of adapting to an ever-changing environment, • Collaboration and Teamwork: Work interdependently and collaboratively with others to achieve mutual goals. Subordinate individual aims in the interest of working with others in a way that promotes and encourages each person’s contributions toward achieving optimal outcomesWhat We Offer, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff/Bevmo! pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • Point Loma, CA: $17.75 per hour

Job Description 🚀 Architect the Data Platform Behind a Top 5 Amazon Seller 📍 Role: Principal Data Architect 📍 Location: San Diego, CA 92101 (Onsite at Symphony Towers) 💰 Compensation Range: $180,000-$220,000 DOE At Luminize, our scale is the opportunity. As one of the top 5 Amazon sellers in the US, we generate massive, complex marketplace data across orders, fees, advertising, settlements, and inventory, and we're investing in the data foundation that turns it into a competitive advantage. We're hiring a Principal Data Architect to own the evolution of our data ecosystem. You'll lead the architecture, modeling, and governance standards that scale with our e-commerce and logistics operations, partner closely with software engineering and product, and help build a true in-house data platform that reduces our reliance on third-party pipeline vendors. This is a senior IC role with a defined path to leading the analytics engineering team. If you want real ownership of a warehouse environment with production stakes and the autonomy to shape it, we'd love to meet you. 🎯What You'll Be Doing • Define and maintain enterprise data models across operational and analytical environments, setting standards for schema design, documentation, and lifecycle management, • Architect and optimize our cloud data warehouse environments (BigQuery/Snowflake), including consolidating and rationalizing the current multi-platform setup, • Simplify the transformation layer by consolidating fragmented pipelines into centralized, reusable datasets with clear lineage and documentation, • Design scalable frameworks for normalizing complex marketplace data (orders, fees, ad metrics, settlements, inventory events) into analysis-ready schemas, • Establish data quality, governance, and reliability standards, including validation, monitoring, and structured-exchange guidelines, • Define and enforce data contracts between ingestion pipelines and downstream consumers to prevent schema drift, • Architect reconciliation frameworks that keep transaction, settlement, and fee data consistent for accurate financial and profitability analysis, • Develop a transition plan to reduce reliance on third-party pipeline vendors while keeping core data models in-house, • Design and own ELT pipelines ingesting from heterogeneous sources including Postgres, MongoDB, and Google Sheets, • Partner with engineering, analytics, and product to align on schema decisions before they ship and ensure the warehouse serves both reporting and product needs, • Support downstream consumers like Looker and internal reporting platforms with models that protect reporting fidelity✅ What You Bring, • 8+ years in data engineering, data architecture, or platform engineering, with at least 3 years in a senior or lead role, • Bachelor's degree in software engineering or related field, or equivalent practical experience, • Deep expertise in BigQuery and Snowflake, including performance tuning, cost optimization, and warehouse design, • Mastery of OLTP and OLAP patterns and when to apply each, • Strong command of Kimball dimensional modeling principles applied in cloud warehouse environments, • Proficiency with dbt or similar transformation frameworks, with experience building reusable, well-documented transformation layers, • Experience designing and optimizing both relational (Postgres) and NoSQL (MongoDB) databases, • Track record building production-grade ELT/ETL pipelines and scalable data models, • Familiarity with BI tools such as Looker or equivalent, • Ability to design and enforce data contracts, governance, and quality frameworks across an organization, • Strong understanding of data security, access controls, and lifecycle management in cloud environments, • Ability to critically evaluate third-party data vendors and develop transition strategies that reduce external dependency, • Clear communicator who can document architecture decisions and translate technical concepts for non-technical stakeholders, • Collaborative by default, able to drive alignment across engineering, product, and analytics without organizational authority, • Leadership disposition with the ability to mentor junior engineers and grow into formal team management, • High-volume retail, e-commerce, or logistics data experience strongly preferred🏙You'll be based in Symphony Towers, one of San Diego's premier office spaces that offers:, • Stunning views of the city and coastline, • Free access to the building gym, • Discounts at restaurants and cafes in the tower, • Secure bike racks in the building and 24/7 paid parking in a nearby downtown structure, • Close walking distance to 100+ of the top bars, restaurants, and coffee shopsOur office is designed for comfort, productivity, and collaboration, featuring:, • Ergonomic standing desks and high-quality workstations, • A fully stocked snack bar, espresso machine, and cold drinks, • A welcoming team lounge area and sunny workspaces, • Multiple medical plan options through Anthem Blue Cross, • Dental & vision insurance (including orthodontia and annual exams), • Pet benefit program with savings on vet care, products, and services, • Paid vacation (accruing up to 120+ hours/year with rollover and cap), • Paid holidays annually, • Coverage for spouses/domestic partners and dependents under 26 📈 Growth & Career Opportunities at Luminize At Luminize, growth isn't just something we drive for our clients, it's our mindset and a big priority for our people. This role is built with a defined path to leading our analytics engineering team. You'll have the autonomy to shape architecture decisions today and the runway to grow into formal team leadership as the function scales. We offer clear career paths and leveling guidelines so you always know where you stand, what's next, and what skills and experience you need to get there. From day one, you'll have visibility into advancement opportunities and what it takes to grow into leadership, specialization, or other cross-functional roles. We're proud of our strong track record of promoting from within. Many of our team leads and managers started in independent contributor roles and grew by consistently showing initiative, curiosity, and impact. You'll also benefit from: • Mentorship and partnership with senior engineering and product leaders, • Cross-functional exposure to departments including software engineering, analytics, brand management, supply chain, operations, and catalog, • Learning resources, including Udemy course access and additional training programs 👉Apply now and let's grow together! Powered by JazzHR O8TfBrXSPF

Job DescriptionBevMo! by Gopuff is seeking a Key Holder for our Retail Operations team. This position is responsible for opening and closing the store and performing other duties in the absence of management. A Key Holder will assist the store in periods of high volume and provide support for new employees, providing excellent customer service while driving sales.Responsibilities: • Provide excellent customer service by greeting and establishing rapport with customers while informing them of the products and services, • Arrive early to open the store and leave late to close the store, • Will assist the store in periods of high volume and provide support for new employees, • Knowledge of in house products to provide customers with recommendations, • Assist with inventory management tasks such as restocking merchandise, conducting inventory counts, and identifying discrepancies., • Process cash transactions accurately and efficiently, including opening and closing tills, counting cash, and preparing deposits., • Operating scanners, cash registers, and other electronics, • Follow proper age verification policies, • Ensuring all prices and quantities are accurate and providing a customer receipt, • Processing refunds and exchanges, • Monitor the sales floor to prevent theft and minimize loss, including conducting bag checks and ensuring adherence to security procedures., • Store cleanliness and assist in maintaining standards on the sales floor, stock room, lockers, and bathrooms, • Train new employees on store procedures, product knowledge, and customer service standardsQualifications:, • 1+ years leadership experience in retail, grocery, military, restaurant or equivalent experience, • Ability to work with fluid schedules; be available during peak hours of operation and availability to support stores on nights, weekends, holidays, etc., • Basic math skills and proficiency in cash handling, • Team-oriented mentality, • Ability to lift up to 49 pounds, • High School Diploma or equivalentWhat We Offer:, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • La Jolla CA: USD $18.50/hr

Job Description Labor One is hiring Journeyman Shipfitters in San Diego, California. * Expected Long-Term Project * Competitive Pay * $160 per diem for those who are eligible * Housing Assistance Job Requirements: * 5 years of recent shipyard experience * Must be able to work any shift and overtime, if required * Must be able to pass a background check * Must be DBIDS eligible * Must be able to pass a drug screen Shipfitter Knowledge: * Welding, tacking, burning, and scarfing Must pass the following Shipfitter Welding Assessment: FCAW Fillet weld plates: 2F 3F 4F (VT test) *Fillet testing shall take 1-2 hours T Bar 12X4” 3/8” thick: · 2F 3F 4F (VT and Fracture test ) *This takes average ship fitter of 1-2 days Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, and read and comprehend safety instructions, regulations, and warnings. Please email your resume to if you're interested. Walk-ins are accepted! 1625 Hoover Avenue National City, California 91950 (858)717-1672 or (619)657-5507 Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionThe Retail Sales Associate is responsible for providing an excellent customer experience and performing duties as assigned including, but not limited to, cashier, sales floor merchandising, replenishment, receiving and e-commerce fulfillment. Responsibilities: • Model company values in all actions, communication and decision-making, • Maintain store standards by assisting with stocking, merchandising and e-commerce operations recovering the store to maintain cleanliness; and completing various operational projects/tasks, • Performs any other duties as directed by management, • Consistently create a positive customer experience through the utilization of the sales and customer service programs, • Educate and enroll customers into BevMo!’s ClubBev Program and the Gopuff App., • Use product knowledge and BevMo! training to make product recommendations to customer, • Provide the customer with solutions, such as product substitutions or special ordering a product when applicable, • Pick and pack items on a per order basis for dispatch to customers, • Ability to ensure accuracy of items picked/packed, • Clean and organize warehouseRequirements:, • Must be 21 years of age, • Retail, e-commerce or warehouse experience is preferred, • Communication: Provide the information required by others in a concise, direct, and unambiguous way. Strive to ensure that the receiver clearly understands the specifics of the message and are able to listen to, receive, and understand messages conveyed by others, • Driving Results: Motivate individuals to achieve and exceed goals by establishing accountabilities, clarifying performance expectations, agreeing to high standards and measures, monitoring and reviewing performance, and providing timely and relevant feedback., • Process Management: Take a systematic approach in contributing to making the company’s workflow more effective, efficient, and capable of adapting to an ever-changing environment, • Collaboration and Teamwork: Work interdependently and collaboratively with others to achieve mutual goals. Subordinate individual aims in the interest of working with others in a way that promotes and encourages each person’s contributions toward achieving optimal outcomesWhat We Offer, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff/Bevmo! pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • San Diego, CA: $16.90 per hour

Job DescriptionThe Retail Sales Associate is responsible for providing an excellent customer experience and performing duties as assigned including, but not limited to, cashier, sales floor merchandising, replenishment, receiving and e-commerce fulfillment. Responsibilities: • Model company values in all actions, communication and decision-making, • Maintain store standards by assisting with stocking, merchandising and e-commerce operations recovering the store to maintain cleanliness; and completing various operational projects/tasks, • Performs any other duties as directed by management, • Consistently create a positive customer experience through the utilization of the sales and customer service programs, • Educate and enroll customers into BevMo!’s ClubBev Program and the Gopuff App., • Use product knowledge and BevMo! training to make product recommendations to customer, • Provide the customer with solutions, such as product substitutions or special ordering a product when applicable, • Pick and pack items on a per order basis for dispatch to customers, • Ability to ensure accuracy of items picked/packed, • Clean and organize warehouseRequirements:, • Must be 21 years of age, • Retail, e-commerce or warehouse experience is preferred, • Communication: Provide the information required by others in a concise, direct, and unambiguous way. Strive to ensure that the receiver clearly understands the specifics of the message and are able to listen to, receive, and understand messages conveyed by others, • Driving Results: Motivate individuals to achieve and exceed goals by establishing accountabilities, clarifying performance expectations, agreeing to high standards and measures, monitoring and reviewing performance, and providing timely and relevant feedback., • Process Management: Take a systematic approach in contributing to making the company’s workflow more effective, efficient, and capable of adapting to an ever-changing environment, • Collaboration and Teamwork: Work interdependently and collaboratively with others to achieve mutual goals. Subordinate individual aims in the interest of working with others in a way that promotes and encourages each person’s contributions toward achieving optimal outcomesWhat We Offer, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff/Bevmo! pays employees based on market pricing and pay may vary depending on your location. Compensation for U.S. locations is based on a cost of labor index for that geographic area., • San Diego, CA: $17.75 per hour

Job DescriptionThe Retail Sales Associate is responsible for providing an excellent customer experience and performing duties as assigned including, but not limited to, cashier, sales floor merchandising, replenishment, receiving and e-commerce fulfillment. Responsibilities: • Model company values in all actions, communication and decision-making, • Maintain store standards by assisting with stocking, merchandising and e-commerce operations recovering the store to maintain cleanliness; and completing various operational projects/tasks, • Performs any other duties as directed by management, • Consistently create a positive customer experience through the utilization of the sales and customer service programs, • Educate and enroll customers into BevMo!’s ClubBev Program and the Gopuff App., • Use product knowledge and BevMo! training to make product recommendations to customer, • Provide the customer with solutions, such as product substitutions or special ordering a product when applicable, • Pick and pack items on a per order basis for dispatch to customers, • Ability to ensure accuracy of items picked/packed, • Clean and organize warehouseRequirements:, • Must be 21 years of age, • Retail, e-commerce or warehouse experience is preferred, • Communication: Provide the information required by others in a concise, direct, and unambiguous way. Strive to ensure that the receiver clearly understands the specifics of the message and are able to listen to, receive, and understand messages conveyed by others, • Driving Results: Motivate individuals to achieve and exceed goals by establishing accountabilities, clarifying performance expectations, agreeing to high standards and measures, monitoring and reviewing performance, and providing timely and relevant feedback., • Process Management: Take a systematic approach in contributing to making the company’s workflow more effective, efficient, and capable of adapting to an ever-changing environment, • Collaboration and Teamwork: Work interdependently and collaboratively with others to achieve mutual goals. Subordinate individual aims in the interest of working with others in a way that promotes and encourages each person’s contributions toward achieving optimal outcomesWhat We Offer, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay, • Gopuff pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • Carmel Mountain, CA: $17.75 per hour

Job Description Move Forward with Volt! Volt is immediately hiring a Supplier Quality Engineer in San Diego, CA. As a Supplier Quality Engineer, you will: • Review supplier data to verify compliance with engineering drawings and specifications., • Review non-conforming parts in MRB (Material Review Board) and determine appropriate dispositions., • Monitor and report on supplier defect rates; guide suppliers in corrective actions., • Support suppliers in implementing process improvements and quality assurance plans. Schedule: Monday – Friday 8am – 5am plus overtime, with some flexibility of starting earlier. This is a full-time onsite position at the San Diego facility. The ideal candidate will have: • Bachelor of Science degree (e.g. Engineering, Industrial technology, Manufacturing Technology), • Extensive experience in supplier quality, manufacturing standards, and quality assurance., • Technical knowledge and exposure with shop operations and manufacturing processes, • Experience using quality / statistical tools and methodologies (e.g. FMEA, PPAP, RCCA) Pay Rate: $40.00 – 45.00 Per Hour DOE *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email or call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Innova Solutions and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at volt-information-sciences-privacy-policy.pdf Pandologic. Keywords: Supplier Engineer, Location: San Diego, CA - 92108 , PL: 603202198

Job DescriptionBevMo! by Gopuff is seeking a Key Holder for our Retail Operations team. This position is responsible for opening and closing the store and performing other duties in the absence of management. A Key Holder will assist the store in periods of high volume and provide support for new employees, providing excellent customer service while driving sales.Responsibilities: • Provide excellent customer service by greeting and establishing rapport with customers while informing them of the products and services, • Arrive early to open the store and leave late to close the store, • Will assist the store in periods of high volume and provide support for new employees, • Knowledge of in house products to provide customers with recommendations, • Assist with inventory management tasks such as restocking merchandise, conducting inventory counts, and identifying discrepancies., • Process cash transactions accurately and efficiently, including opening and closing tills, counting cash, and preparing deposits., • Operating scanners, cash registers, and other electronics, • Follow proper age verification policies, • Ensuring all prices and quantities are accurate and providing a customer receipt, • Processing refunds and exchanges, • Monitor the sales floor to prevent theft and minimize loss, including conducting bag checks and ensuring adherence to security procedures., • Store cleanliness and assist in maintaining standards on the sales floor, stock room, lockers, and bathrooms, • Train new employees on store procedures, product knowledge, and customer service standardsQualifications:, • 1+ years leadership experience in retail, grocery, military, restaurant or equivalent experience, • Ability to work with fluid schedules; be available during peak hours of operation and availability to support stores on nights, weekends, holidays, etc., • Basic math skills and proficiency in cash handling, • Team-oriented mentality, • Ability to lift up to 49 pounds, • High School Diploma or equivalentWhat We Offer:, • Medical/Dental/Vision Insurance (for full-time employees), • 401(k) Retirement Savings Plan, • 25% employee discount & FAM Membership, • Vacation and Sick Time for eligible employees, • EAP through AllOne Health (formerly Carebridge)Pay:, • Gopuff pays employees based on market pricing, and pay may vary depending on your location. Compensation for U.S. locations is based on a cost-of-labor index for that geographic area., • Mission Valley, CA: USD $18.50/hr

Job Description NOW HIRING: Pilates Instructor for Granite Hills Studio FULL-TIME & PART-TIME POSITIONS AVAILABLE: $40.00-55.00 PER CLASS OR MORE DEPENDING ON EXPERIENCE. NEGOTIABLE FOR QUALIFIED TALENT. • We offer base pay for group classes with incentives based on client attendance as well as additional bonus opportunities. ABOUT OUR FIVE STAR RATED TEAM: Riser Fitness is one of the nation’s largest multi-unit developers of the Club Pilates franchise system. With over 100 locations, Riser Fitness is also one of the longest operating franchisees in the country with continued plans for further expansion in the U.S and Mexico. ABOUT OUR BRAND: Club Pilates is an internationally recognized brand, committed to providing affordable and accessible Pilates to the community. With over 1000 locations across the country and globally, Club Pilates provides millions of workouts a year to tens of thousands of members. INSTRUCTOR HIGHLIGHTS: We are currently hiring Instructors (minimum of Mat & Reformer training) with confidence in working with all levels of clients to provide challenging, fitness-based Pilates classes in a safe manner. Instructors have the opportunity to teach group classes as well as private and semi-private sessions in our state-of-the-art studios featuring Balanced Body equipment. Earn great pay working flexible hours that can be dialed up or down, with block shifts, private training and subbing opportunities. JOB PERKS & BENEFITS: • Employee Status with predictable income, • Clients provided – no need to worry about selling or client acquisition, • 401(k) benefits with matching, • Paid Time Off, • Holiday pay, • Flexible block scheduling and shifts to fit your lifestyle, • Complimentary continuing education in-person and virtually, • Professional Career Development & Growth Opportunities, • Referral Bonus Opportunities, • Travel Opportunities, • Nurturing and vibrant environment, • 450+ hour comprehensive Pilates education (Minimum education to include Mat and Reformer), • Capable of using a contemporary approach to classical exercises, • Pleasant demeanor and excellent customer service skills, • Demonstrated group Reformer instruction abilities, • Professional and effective communication skills, • Willingness to evolve with new developments in the fitness industry, specifically Pilates, • Passion for learning and willingness to attend continued education trainings and seminars, • Must be skilled at proper and safe use of a variety of Pilates equipment during each class, (minimum to include Mat and Reformer) to ensure a safe yet creative group experience. Ideal skill set will also include training in the Chair, Springboard, and Cadillac, as well as TRX, Magic Circle and other equipment., • Demonstrate anatomical knowledge and focus on safety with the ability to provide modifications and progressions for clients with injuries and/or limitations, • Stay up to date with, and implement Club Pilates education standards at all times, • Develop and create class plans that are safe, effective, and challenging pursuant to Club Pilates standards, • Provide Pilates instruction to include Intro classes, group apparatus classes, private and semi-private training as scheduled, • Any other duties as assigned DO PILATES. DO LIFE. APPLY TODAY FOR INTERVIEWS THIS WEEK. Powered by JazzHR mcIGYtPI7N

Job DescriptionPrincess Polly is the global fashion brand at the forefront of trend-driven, lower impact and accessible apparel. Established as an online force in the Australian retail scene in 2010, Princess Polly quickly became the clothing brand found in every influencer haul, viral TikTok, Instagram OOTD and celeb street looks. Now, one of the fastest-growing online women's fashion brands in the USA, Princess Polly has been delivering the best online shopping experience to customers worldwide for over 10 years. As a part of A.K.A Brands; we are a global player with offices located in Los Angeles and Australia’s Gold Coast. With big plans ahead, we're always on the hunt for new talent to join our global team. We are growing our team based at our San Diego Retail Store and are looking for talented individuals to join the Princess Polly team. Think you can help us in our journey of becoming the best four wall shopping destination like...ever? If you're a motivated team player that's obsessed with all-things fashion and pop culture, we'd love to hear from you. POSITION SUMMARY As our Retail Store Associate, you'll be at the forefront of our mission to provide a unique, immersive shopping experience, bringing our online presence into the real world. They will be responsible for providing exceptional customer service in a fast-paced retail environment while maintaining an elevated standard of visual merchandising and store standards. The retail store associate will also keep our sales floor replenished, and unpack and prepare merchandise as it arrives at our store to be merchandised. The ideal candidate will be positive, high-energy, highly motivated, and possess a great sense of style. The goal of the Retail Store Associate is to excite customers with this new and exciting IRL experience! Come and join us as we embark on this new adventure, creating an exciting in-store experience that our customers are sure to love! COMMERCIAL AND EDUCATION REQUIREMENTS -High school diploma required-Prior experience in a retail environment is preferred but not mandatory. What matters most is your passion for fashion and a knack for customer service.-Excellent communication skills, attention to detail, and the ability to multitask-An upbeat, high-energy demeanor. We're looking for someone who's excited to interact with customers and passionate about our brand.- Capability to lift and carry boxes or bins weighing up to 20 lbs-Great sense of style-Ability to work flexible hours, including nights and weekends Salary banding:$18/hourPrincess Polly is an Equal Opportunity Employer (EOE) We're committed to a diverse and inclusive workplace and encourage applicants from all walks of life. Come join us, different makes us better. What are you waiting for? Come experience something different and amazing in the online fashion space! #PrincessPolly #PursueYourPassion #PrincessPollyCareers We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionWith over 700 locations in Japan and a rapid growth in the U.S., Gyu-Kaku is looking for candidates that are passionate about people and food to help spread out our dining culture with the world. Gyu-Kaku Japanese BBQ Restaurant in San Diego, CA is NOW hiring HOURLY MANAGER POSITIONS. Manager responsibilities include maintaining the restaurant’s revenue, profitability and quality goals. You will ensure efficient restaurant operation, as well as maintain high production, productivity, quality, and customer-service standards. Responsibilities· Assist in restaurant operations including but not limited to, front-of-house and back-of-house· Execute and train excellent standards of customer-service· Enforce quality best restaurant practices· Organize and supervise shifts· Maintain high energy and develop high standards with staff· Forecast and maintain inventory to meet customer standards· Enforce compliance with sanitation and safety rules and regulations· Control costs· Represent the brand and maintain quality of the Gyu-Kaku Brand· Lead by example· Assist in future development plans to accelerate productivity Qualifications· Proven working experience as lead server or restaurant manager · Demonstrated career experience in customer service management· Food and beverage knowledge· Proficiency in English· Computer literacy and familiarity with restaurant management software· Strong leadership, motivational and people skills· Acute financial management skill Physical DemandsLight work: Employee may be required to lift 20 pounds maximum with frequent lifting and/or carrying of objects weighing up to 10 pounds. Requires frequent bending and/or squatting and/or twisting Job Type: Part-time and Full-time Pay: $23.00 per hour.Benefits:· Roth IRA· Health insurance· Employee discount· Paid time off· Cell phone Reimbursement· Professional Career Development and Growth Opportunities. Schedule:· Monday to Friday· Weekend and holidays availability Remotely: No For more information about us, please visit our website . ENRY JP CORP (DBA Gyu-Kaku Japanese BBQ) is an EQUAL OPPORTUNITY EMPLOYER.

Job DescriptionWe are seeking an Assurance Audit Manager specifically for State and Local Government to join a growing CPA firm in Del Mar. This person will be responsible for State and Local Government Audits, budgeting and executing engagements, growth strategies, project management and billing and managing a team. The ideal candidate will have 5+ years of experience, CPA, Bachelors degree, public accounting experience and exceptional analytical thinking skills. Apply now for consideration! Core Responsibilities: • Leading Managing and Holding People Accountable (LMA), • Understand and assist in execution of growth strategies (research calls, pipeline mgmt., COPs, etc.), • Manage the engagement (job) project management, billing / ensures QC (technical) standards, • Takes care of the client (meets deadlines, timely communication), • Develops engagement team (prepares seniors to the next level), • Exhibit technical proficiency and the management ability to plan, budget for, and manage complete audit and/or client engagements, including preparation of reporting products, in accordance with MGO’s policies, procedures and practices., • Demonstrate a command of project management skills exhibiting the ability to complete and deliver products and services in a timely and efficient manner., • Manage lower level associates, providing timely verbal and written feedback including conducting annual performance evaluations., • Exhibit expertise in assigned areas/departments of the firm., • Demonstrate ability to resolve technical and client service issues and/or problems independently., • Recognize and capitalize on opportunities to provide additional services to clients., • Monitor and manage hourly yields realized on engagement or client billings, pursuing cost savings and raising ideas from others and self., • Prepare billing worksheets as per firm schedule and procedures and communicate with clients to ensure satisfaction and retention., • May act as advisor to lower level associates., • Personnel responsibilities such as hiring, termination, promotion, demotion, assignment and performance feedback. Minimum Qualifications: • Minimum of 5 years of experience in public accounting, state and local government auditing experience, required with a minimum of 2 years of experience as a senior associate., • Demonstrated ability to manage large engagement teams dealing with sophisticated local governments and the ability to prepare financial statement in accordance with GASB 34., • Advanced technology skills in data analytics, financial statement preparation applications and research., • Proven ability to assign work, guide employees and complete projects on time and in budget., • Bachelor’s Degree in accounting OR Bachelor’s Degree plus requisite accounting coursework., • Certified Public Accountant (CPA) License from appropriate state., • Demonstrated ability to communicate effectively both verbally and in writing to direct reports, management at higher levels and clients., • CPA License (active and in good standing) from appropriate state.

Job Description KFC Team Member – Food Production Serve Great Food. Build a Great Future. Have Fun Doing It. At KFC, we don’t just cook up world-famous chicken—we build careers, friendships, and futures. As a Food Production Team Member, you’re at the heart of our brand, delivering fast, fresh, and friendly service to every guest while working in a fun, team-first environment. Whether you’re working the front counter, preparing food in the kitchen, or helping customers at the drive-thru, you’ll gain valuable experience and develop skills that’ll serve you for life. And we’re here to help you grow into leadership, continue your education, and unlock long-term success. What You'll Do As a KFC Team Member, your day is never boring. You’ll be trusted with responsibilities that make a real difference—from guest satisfaction to food quality. Your responsibilities may include: • Greeting guests with energy, friendliness, and a can-do attitude, • Taking and processing orders with accuracy and speed, • Handling cash, making change, and operating the register, • Preparing KFC’s iconic menu items fresh to order and with care, • Keeping food areas clean, organized, and safe, • Monitoring equipment and reporting any issues promptly, • Re-stocking inventory and unloading deliveries, • Following food safety and sanitation standards, • Working with your team to meet shift goals and ensure every guest leaves happy Who We’re Looking For We’re not just hiring workers—we’re building a team of motivated, respectful, and growth-oriented individuals who want to make an impact and have a little fun doing it. You’ll be a great fit if you: • Are at least 16 years old, • Have reliable transportation to and from work, • Enjoy working with people and love making customers smile, • Are a team player who brings positivity, energy, and accountability, • Are willing to learn and open to feedback, • Can lift up to 50 lbs and stay on your feet during a fast-paced shift, • Are comfortable operating a register and handling basic math, • Are dependable, punctual, and take pride in your work, • Can follow instructions and complete required training certifications What’s in It for You? We believe in rewarding hard work and supporting your goals—on the job and beyond. Here’s what we offer: • Competitive pay, • Free meal every shift, • Flexible schedules—day, night & weekend shifts available, • Tuition reimbursement & scholarships, • Paid Time Off (PTO), • Perks & discounts on phones, vehicles, gyms, and more, • Career growth & promotion opportunities, • KFC Foundation Programs, including:, • FREE college tuition through Western Governors University (WGU), • $1-for-$1 Savings Match Program, • Hardship Assistance for emergencies, • Employee assistance & support programs Ready to Start Your Journey? Whether you're looking for your first job, a flexible side hustle, or a launching pad into a career in leadership, KFC is a place to grow, connect, and thrive. Apply now and join a team that’s all about flavor, family, and your future.

Job Description As a Facility Service Manager, you will oversee the operational and fiscal activities of the department while ensuring exceptional service delivery and customer satisfaction. This role manages Service Technicians, dispatch team members, and other trade professionals, as well as coordinating with vendors and subcontractors. You will be responsible for reviewing, estimating, and overseeing all incoming repair requests and preventative maintenance jobs. Additionally, you will develop and maintain strong customer relationships, ensuring quality standards and adherence to performance metrics. The Service Manager also leads hiring, training, and coaching for the team, while planning and implementing systems and procedures to improve efficiency across our maintenance and construction divisions. Key Responsibilities: • Manage customer relations and have daily communication with all clients that are on the client roster, • Determine staff requirements to maintain required service levels, • Hire and train great people as needed to become excellent team members, • Work with employees to set their goals and objectives, • Identify opportunities to further train & develop staff to maximize their potential, • Plan and implement procedures or systems to maximize operating efficiencies, • Review performance data and sales activities to monitor and measure productivity, good progress, and employee activity levels • Conduct daily meetings with the Service Coordinator to obtain the current work order status and job details, • Review personnel requirements for each work order and fill positions or outsource to subcontractors as needed, • Ensure service schedules are created according to company policies and client requests, • Ensure service schedules are followed and meet the client’s SLA agreements, • Ensure that work order costs remain within the budget set for the service, • As required or directed, be prepared to carry out other duties and responsibilities, and assist other company personnel, • Must have a written continued education plan, • Enforce a safe work environment in the field and in the shop as per safety manuals and OSHA standards, • Actively track and pursue written career goals, • Submit estimates per SLA timelines, • Submit budgets once per month for client/employee engagement Results Expected: • Maintain high-quality client relations by calling, creating events for customers to attend for non-issue-specific, relationship-building purposes. • Increase work order volume from existing clients month to month and year to date by 10%., • Maintain high-quality employee relations., • Manage a minimum number of work orders and revenue every month per team’s KRAs. Preferred Qualifications: • Minimum 5 to 8 years’ trade management experience or equivalent, • Bachelor’s degree or equivalent in a related field, • Experience with managing staff of 10 or more, • Knowledge of strategic planning, • Knowledge of human resources, management principles, and procedures, • Knowledge of basic economic and accounting principles and practices, • Knowledge of office administrative procedures, • Proficient in Microsoft Office, Word, Excel, and experience with construction estimating software, • Knowledge of all construction trades such as electrical, carpentry, plumbing, framing (metal and wood), drywall, FRP, ceiling grid, ceramic tile, cabinetry, and general finish work, restaurant equipment • Commercial building code knowledge, • ADA code knowledge Key Competencies: • High-quality judgment, • Innovative, • Decision making, • Information management, • Planning and organizing, • Problem analysis and problem solving, • Delegating tasks and responsibilities, • Motivating staff, • Excellent communication, written and verbal, • Teamwork, • Flexible, • Accountable, • Great interpersonal skills, • Work well under pressure and tight time constraints, • Ability to deal with complex or ambiguous situations, • Keen eye for detail We have a remarkably high success rate in placing the right person in the right job. What’s our secret? We go out of our way to make personal connections to find the right staff right now. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Arbitration is a condition of employmentGo-Staff, Inc. is a family owned and operated full-service staffing company serving all of Southern California. We excel at placing job seekers in positions that are right for them, and we help employers in a wide variety of fields find talented employees that meet their needs.\r\n\r\nWe have a remarkably high success rate in placing the right person in the right job. What’s our secret? We go out of our way to make personal connections to find the right staff right now.\r\n\r\nWe are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.\r\n\r\nArbitration is a condition of employment