Trabajos overnight customer service en Dallas, Texas - Page 4Crear alertas

Job DescriptionDescription: As the Field Service Technician, you will perform and carry out all tasks related to installing, assembling, servicing, and repairing Aerzen products. They provide customers with prompt, professional and high-quality service. Work is performed at our location and/or at our customer’s location. Services provided may be scheduled or on-demand. Overnight travel on short notice is often required. • Performs startups, equipment inspections, troubleshooting, repairs and/or preventive maintenance service on all Aerzen Products at customer sites; Represent Aerzen in professional and courteous manner following all Aerzen and customer safety requirements., • Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital); Installing and terminating electrical, pneumatic and fluid connections; Understand controls narratives and analyze/troubleshoot process application related issues., • Analyzing and correcting communication issues; Properly address TCP/IP networks and RS-485 communications., • Perform repairs and assembly on Aerzen Products; Disassemble; assess damage and evaluate failures on machines; diagnose problems with Aerzen machines by evaluating material condition and asking the customer questions; demonstrates the ability to offer machine-based recommendations; can identify the root cause of a machine failure; Utilize defined procedures and a standard rebuild kit., • Read, understand and use equipment diagrams, checklists, engineering drawings, and other process documentation to perform service tasks, assembly and repairs on Aerzen Products., • Communicate with customers to discuss job requirements, provide recommendations and service options, listen to customer concerns, and provide status updates during service call and at completion., • Evaluate customer future needs and communicate information through appropriate channels., • Assist engineering in plant design, modifications and hazard analysis., • Plan and schedule travel to best meet customer requirement, service schedule requirement and time efficiency utilizing the Concur booking tool., • Complete job-related service reports, expense reports and forms in a timely basis; Collect data and make commissioning graphs using Company Software., • Complete written repair reports to document cause of failure, description of work performed, materials consumed, condition of equipment as received and as returned to the customer., • Conduct customer training on Aerzen Products when onsite., • Perform all work in accordance with quality standards, established safety procedures and maintains a clean, safe work area. Experience: 1-4 years of Field Service Experience with rotary equipment such as compressors, Pumps or similar. Must have electrical experience, preferably working with VFDs and controls. Certification(s): N/A Technology Aptitude/Skills: Windows, Microsoft Office, Sales Force Internet Abilities; TCP/IP networks and RS-485 communications: Allen Bradley PLC experience is preferred. Will learn and utilize other software systems in the role. Other Skills: RS Logix 5000 experience is preferred; PLC or similar Ladder-Logic programming experience is desired; Ability to Interpret process flow, control wiring, as well as piping and instrumentation diagrams; Welding (brazing, cutting, welding, plasma) a plus. Culture Match Behaviors: Entrepreneurial spirit, who is collaborative, trusting of others, has strong work ethic, and can work well independently or with others in a fast-paced environment. Aerzen USA Corp is an equal opportunity employer and selects employees on the basis of skills and experience. Aerzen USA ensures that all persons are entitled to equal employment opportunity without regard to race, color, gender, gender identity, sexual orientation, pregnancy, age, national origin, religion, marital status, ancestry, disability, veteran’s status, and any other characteristic protected under applicable federal, state, or local laws. All employment decisions and actions are based on merit and made without regard to any characteristic protected by state, federal or local law. All offers of employment at Aerzen USA Corp are contingent upon clear results of a thorough background check. In compliance with the Drug-Free Workplace Act of 1988, Aerzen USA Corp has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of Aerzen employees and to the security of the company's equipment and facilities. For these reasons, Aerzen USA Corp is committed to the elimination of drug and alcohol use and misuse in the workplace. Applicants being considered for hire must pass a drug test before beginning work. Refusal to submit to testing will result in disqualification of further employment consideration. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including termination of employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description Job Description: HOLT CAT in Irving, Texas; is looking for a experienced Engine Field Service Technician. This position is responsible for providing high-quality rebuilds and repairs on Industrial Engines and equipment in a field environment, in order to respond to customer needs in a positive, caring, and timely manner and to ensure maximum value for work performed. The hours of the position are Monday-Friday 7 AM - 4 PM. Must have a safe driving record. Must be able to do a DOT Physical. Daily travel and occasional overnight travel is required. Qualifications: A qualified candidate must have the following skills or abilities: • Must be able to troubleshoot and repair Industrial Engines (Diesel and Natural Gas) in a field environment., • Must have a minimum of 5 years of shop or field experience related to industrial engine repair, troubleshoot and diagnose., • Must be able to use CAT ET and CAT SIS 2.0, • Must be able to troubleshoot and diagnose complex problems using reasonable, and efficient practices, • Must have steady employment history, • Diesel technology schooling preferred, • Excellent customer service skills. Must be able to effectively communicate, both written and verbal, with customers and employees in a professional manner. Must build and maintain strong customer service relationships, • Must have their own tools. (Up to 3/4 inch drive metric and standard), • Must take pride in maintaining the highest standards of quality, yet capable of adhering to time requirement limitations, • Ability to be productive by working efficiently and effectively with a high energy level., • Ability to work with limited supervision and able to work in a team atmosphere, • Ability to frequently Reach, Bend, Walk, etc., • Must be able to Lift 60lbs approximately 15 times a day, • Able to stand and walk for extended periods., • Excellent attention to detail and results-oriented., • Excellent attendance required., • Requires wearing common protective or safety equipment, • Regularly works outdoors around moving mechanical parts and noise level may be loud at times, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Valid driver's license required, • Class A CDL is preferred, • Must have a safe driving history, • Must be able to pass a DOT Physical, • Crane rigger certifications preferred., • High school diploma or equivalent preferred #LI-HCT #HOLTCAT #CAT #CATERPILLAR

Job Description Remote: Travel: 100% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Compensation + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities! This role is key to maintaining the highest level of customer satisfaction and helping assure field deployed equipment meets Maverick Power’s highest quality standards. Supporting equipment installation, start-up and commissioning efforts, troubleshooting and repair of power distribution equipment and collaborating with engineering and manufacturing staff to upgrade, modify or configure installed equipment. This individual must have a keen sense of technical detail, be very well organized, punctual and act with a sense of urgency in support of our customer needs. Service Technician must be able to interpret electrical drawings, write reports, collect, document and organize technical information. Additionally, must me safety minded and strictly adhere to company and site safety policies. Key Responsibilities: • Travel to customer sites and work independently or as part of a team in support of equipment installation, start-up and commissioning efforts., • Collaborate with the Engineering, Field Services and Product Management team to as necessary to address quality and warranty concerns., • Read and interpret technical drawings, service manuals and product instructions for configuration of equipment., • Complete field technical reports, update safety documents, documents quality findings and resolutions utilizing company and customer computer maintenance management systems., • Work with service management, engineering and manufacturing staff to address manufacturing quality issues and engineering change requests., • Responsible for interpreting drawings, wiring diagrams, Bill of Material and specifications., • Utilize standard and specialized electrical test equipment to diagnose, program and repair installed equipment., • Assist engineering staff in collecting the required information for the development of technical documentation when required., • Utilize mechanical abilities to install, adjust and repair various electro-mechanical components or assemblies., • 2-Yr Technical Degree and minimum of 2 years of electrical/mechanical experience. Alternately an equivalent combination of education and experience is required., • Ability to travel, including overnight stays when required., • Ability to interpret technical drawings, wiring diagrams, power studies and other technical documents including equipment operating and repair manuals., • Computer program skills must include Microsoft suite of programs, • Must have a valid driver’s license., • Must be able to drive a company and/or rented vehicle and be insured. EEO/AAP Statement: We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description The BCP Field Service Technician for Compact Construction Equipment provides face-to-face customer service located at an off-site location and is responsible for troubleshooting, diagnosing, repairing, and reconditioning various compact construction equipment. Essential Functions: • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs minor to complex repairs and troubleshooting offsite with minimal supervision, • Performs moderate troubleshooting of equipment malfunctions and failures, • Removes and installs parts, disassembles and assembles basic components, • Tests and verifies proper operation of all repairs, • Prepares and completes all job-related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete the job, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Maintains service vehicle inspection records, daily inspections, and driver logs as required by the Department of Transportation, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and the vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Completes assigned jobs and tasks to meet flat rate time and re-work standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance; may be relied upon to act as a mentor to lower level Technicians, • Requires regular and punctual employee attendance, • Candidates must have 2 years or greater of field or shop service tech troubleshooting and repair skills in Compact Construction Equipment; such as Skid Steers and smaller construction equipment ( mini excavators )., • Knowledge of safe work procedures and practices., • Must have their own tools., • Advanced knowledge of equipment and tools, including their designs, uses repair, and maintenance., • Advanced knowledge of hydraulics, transmissions, engines, undercarriage, and electrical., • Demonstrates proficiency with current computer software, related hardware, and basic knowledge of machine electronic systems., • Exceptional skills in customer service, • Basic diagnostic and troubleshooting skills, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills of equipment or systems, • Equipment selection skills to determine the kind of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a crane and forklift, and obtain required certifications/licenses, • Ability to meet deadlines and work under fast-paced, time constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in the mechanical repair, • More than one year of compact construction equipment experience required; three or more years preferred., • High school diploma or equivalent preferred, • Air conditioning certification preferred, • Valid Driver’s license required., • Must have a safe driving record., • Must be able to pass a DOT Physical and maintain a medical card, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 80 lb., • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet, and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Requires wearing common protective or safety equipment, • Regularly works outdoors around moving mechanical parts and noise level may be loud at times, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Required to perform work in cramped spaces and/or high places How to Apply: If you are interested in the position, please complete our online application by applying directly on our website at . We also provide excellent benefits such as medical, dental, vision, life insurance, 401K plan, vacation, and holiday pay. • HOLT CAT (and related entities) is an Equal Opportunity and Affirmative Action employer. It is our practice to provide equal employment and advancement opportunities to all individuals. All employment decisions at HOLT CAT and related entities will be made on merit, qualifications, and abilities., • It is the policy and commitment of HOLT CAT and related entities to ensure equal opportunity is provided in all employment opportunities and practices, regardless of race, color, religion, age, marital status, sex, sexual orientation, gender identity, genetic information, national origin, veteran status, disability, or any other characteristic protected by law. Please view Equal Employment Opportunity Posters provided by OFCCP on our website.

Job Description Do you love serving the customer – whether helping your co-workers or the customer? Are you looking for a job that lets you show off your awesome organization and communication skills? Are you a list maker — managing your to-do list each day gives you great satisfaction? When it comes to a weekend away with your friends, are you the person who ensures everyone stays on schedule and has a good time? Do you thrive in an environment dedicated to personal self-improvement, ongoing customer satisfaction, and a healthy dose of fun? Are you a risk taker? If so, we want you on our team! CSI is looking to hire an organized and people-focused individual for the Order Processor– Customer Service position in our Grand Prairie, TX office. You will be responsible for supporting CSI customers and the sales staff with varied tasks related to customer requests for information, including quoting and order management. Attention to detail will be important as this position will require tasks such as setting up New Customer accounts per instructions and syncing customers from our CRM. You will also enter/convert customer orders and quotes each day and maintain all accounts, contacts, and records in our ERP system. You’ll also need strong communication skills as you work to involve sales in customer interaction, including quotes, orders, new customers, national account activity, and territory- related accounts. Sound like something you’d enjoy? Apply now! Salary: $20 - $23 per hour About CSI: CSI provides state-of-the-art stainless-steel process equipment and service for the food, dairy, beverage, pharmaceutical, and personal care industries. We are a growing company with a passion for providing superior customer service. Our work environment is rooted in respect, teamwork, continual learning, and growth... with a large dose of community and fun! We believe our employees are our greatest resource and are committed to investing in our team. Which is why we offer health and wellness, paid time off, retirement planning, on-going personal development and more! If it wasn’t already obvious, we also value fun and community! Which is why we strive to create an enjoyable and positive work environment – hosting company BBQs, bringing in local food trucks, casual Fridays, wellness programs, and even encouraging our team to invest and volunteer in our local community. We’re looking for fun and energetic candidates that want to join our growing family and ensure our customers delight in CSI. If this sounds like you, what are you waiting for? Apply now! Primary Functions • Understand philosophy of setting up new customer accounts, • Data integrity – Daily, • Answer roll-over calls, • Set up New Customer accounts per instructions - Within 1 hour of receipt, • Respond to customers internal and external – Within 1 hour of receipt, • Convert quotes per customer orders per standard – Daily, • Execute proper review and updates of all open orders, including communication for Internal and external customers – Daily, • Maintain all accounts, contacts, and records in ERP – Daily, • Include sales in customer interaction including quotes, orders, new customers, national account activity, and territory related accounts – Daily, • File all documents in the DMS – Daily, • Communicate with vendors to purchase and expedite drop ship goods – Daily, • Coordinate any special logistic needs as required by customer – Daily, • Support sales efforts through questioning and qualifying the prospect, daily Education/Training: • High school diploma or equivalent, required College credits, desired, • Professional telephone etiquette, required, • Computer proficiency, required This position requires the ability to interact with employees verbally and in writing, remain in a stationary position for 80% of the workday, have close visual acuity, and constantly operate a computer and other office productivity equipment, such as a phone, copy/fax/scan machine, computer keyboard and mouse with or without reasonable accommodation. This position also requires the ability to occasionally lift, stoop, bend, and lift office products and supplies, up to 20 pounds. CSI has a long standing policy of Equal Opportunity in employment. Our practice is to fill positions by selecting applicants who can perform the work in a competent and professional manner. We do not discriminate on the basis of age, sex, race, color, religion, national origin, sexual orientation, gender identity, protected veteran status, or individuals with disability. U.S. federal law requires completion of employment eligibility verification upon hire. CSI participates in E-Verify. Must have the right to work in the United States.

Job Description Associated Packaging is looking for amazing and talented people like you! Join our team today and become part of one of the fastest growing companies and industries in the country. Employees of Associated Packaging, Inc. enjoy an energetic and people-first company culture. We are excited to offer a premium benefits package including PTO, Employee Assistance Programs, 401k matching, Health Insurance, Medical Insurance, Dental Insurance, Vision Insurance, and much more! The Equipment Service Technician provides excellent technical services and customer service experiences maintaining strong relationships with manufacturers, suppliers, and sales representatives. As such, you must be a positive, energetic leader who excels in working in a collaborative environment. Key Duties & Responsibilities: • Perform all on-site installation, repair, maintenance, and troubleshooting tasks providing instructional training to customers, • Continual training of equipment and resources necessary to perform the functions of the department, • Attend Branch and Technical Service meetings scheduled by Service Manager or Branch Mgr., • Consistently deliver excellent customer service experiences by offering knowledge, advice, and answering questions and concern, • Manage excellent vendor relationships by providing timely communications, problem-solving, and site visits key suppliers when necessary, • Coordinate with VP of Sales and Sales Representatives to provide excellent customer support, • Diagnose errors or technical problems by visual and auditable inspection of machines and determine proper solutions, • Dismantle machines and equipment to gain access to and resolve issues, • Diagnose, install, and repair electrical apparatus such as transformers and wiring, electrical, electronic components of machinery and equipment, • Produce timely and detailed service reports, • Monitor work procedures, work schedules, and expedite workflow, • Create and submit a completed expense report each month, • Assist with office / warehouse needs as time permits Education and/or Experience: • A minimum 3-5 years of experience in machinery and conveyor equipment experience is required., • High school diploma or its equivalent is required. Competencies: • Exceptional customer service and must be people-oriented with the ability to build business relationships, • Proficient computer skills including MS Office Suite, Allen Bradley or equivalent PLCs, smartphones, and tablets, • Local travel and overtime required, • Minimal overnight travel required, • Dependable transportation required, valid driver’s license, and proof of insurance, • Familiarity with scheduling and expediting the turnaround time on service calls, • Analytical, problem solving, business analysis, and project management skills Why work at Associated Packaging, Inc.? Longevity - Associated Packaging, Inc. has been providing packaging solutions for companies since 1977. Stability - Even during times of recession and economic uncertainty, Associated Packaging, Inc. has remained financially strong and experienced tremendous growth. Customer Service - We focus on partnering with our customers to find and maintain the best solution possible for their packaging needs. Our customers consider us problem solvers and profit enhancers. Our People - At Associated Packaging, Inc., people are our greatest asset. We value each employee and know that great success comes from a great team.

Job DescriptionWatch this video to learn more about Pureflow! TEXAS FIELD SERVICE TECHNICIAN About the Position: Pureflow provides premium water solutions for mission-critical water systems. Our customers range from pharmaceutical and life science manufacturing and research facilities to industrial power, electronics, and manufacturing sites. We are looking for talented technicians who can maintain and troubleshoot moderate to complex mechanical equipment used in the purification of ultra-pure water for critical applications. Successful technicians usually have backgrounds in repairing integrated equipment such as HVAC, Automotive or Diesel, or other automated electro-mechanical systems. We provide all training necessary to transfer the knowledge that you already have into the management of high-tech water purification technologies. Key Responsibilities: • Performs field maintenance of high-purity water systems, • Perform diagnostics and troubleshooting on systems that impact water system efficiency and chemical purity, • Assists Installation Department staff in commissioning/startup of new water systems as needed, • Provides thorough documentation of all work, parts, and time in accordance with SOPs, • Works closely with service management and engineering teams to identify system or component problems and implement solutions, • Partners with customers in the consistent management and maintenance of their water systems and assists them in good management practices for the smooth performance of their systems, • Maintains effective, trusted working relationship with customers, • Communicates with TX Technical Service Center Manager regarding service contract issues, • Uses safe work practices driving, in the shop, and at customer sites, • Maintains extraordinarily neat work areas, including vehicles, shop, and work sites, • Minimum 3 years of experience in equipment service operations, preferably in customer-facing settings, • Strong electrical and mechanical aptitude with some commercial/industrial experience, • Ability to understand instrumentation and controls, • Self-motivated, results-oriented, organized, energetic & capable of staying cool under pressure from multiple ongoing projects, • Good computer skills (Internet Explorer, Word, Excel), • Majority of work is performed in industrial settings inside customer facilities, • Regular "on call" rotation assignments, • Significant local travel, plus average of 7 overnight stays per month, • Must have and maintain a record of safe driving with no recent moving or driving violations, • Competitive base salary, • Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, Health Savings Account (with company contributions), and more, • $1 for $1 401k match up to 4% of salary, • 9 Company-paid holidays, • Generous personal time off that increases with tenure, • Education assistance, • Employee referral bonus program, • Ongoing training and development by internal and external industry experts Pureflow is an equal-opportunity employer and requires pre-offer background checks and post-offer, pre-employment drug tests on all positions. Additionally, this position requires a post-offer, pre-employment physical. Key words: Service, Technician, Mechanic, Mechanical Engineer, Facilities, Maintenance, HVAC mechanic, Automotive Mechanic, Plumber

Job Description We are a leading Commercial TPA providing performance-based damage appraisal solutions dedicated to partnering with our customers to increase the efficiency of the overall claim process. As an Auto Damage Field Appraiser under moderate supervision, this remote position will appraise the value and cost of damage to autos, trucks, and heavy equipment. The position will manage appraisals to completion and provide quality customer service throughout the appraisal process while maintaining compliance with internal and external quality standards and state-specific regulations. Compensation: $70,000 - $82,500 yearly Responsibilities: • Inspect, photograph, and appraise damage to autos, trucks, and equipment that have been damaged in an accident or weather-related loss., • Provide quality customer service and ensure appraisal quality, timely inspections, and communication with claims adjusters and insureds., • Complete auto repair facility and independent re-inspections, supplements as warranted to verify damage and confirm repairs are completed., • Provide technical advice on vehicle repair, parts costs, and garage or body shop expertise., • Apply established appraisal protocols and metrics to all estimates, document the rationale for any departure from applicable protocols and metrics, with or without assistance., • Evaluate all claims for subrogation and salvage recovery potential. Document and communicate the potential to the assigned claim adjuster., • Approximately 25% travel, which may require some overnight stays.Qualifications:, • Auto Physical Damage Appraisal experience., • Must have body shop experience and/or be familiar with the field appraiser/insurance industries., • On-site Catastrophe appraisal experience preferred.About Company Our mission is to organically grow our independent agency to assist as many clients as possible and mitigate risk. We execute at the highest level from day one to every day moving forward. We set the gold standard in success, continuously raising the bar as we change the way the industry thinks about products and services.

Job Description The Electronic Repair Technician tests, diagnoses, repairs and adjusts electronic and optical equipment to ensure that they are in the optimal working order. The incumbent will diagnose GPS receivers, radios, data collectors, tables, optical devises to include levels, robotic total stations, and other devises. Must be able to disassemble, repair, assemble, and test the same. Must communicate with customers, prepare quotes, document repairs using applicable computer programs to do the same. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Diagnose GPS receivers, data collector, radios, displays, and tablets issues and makes proper repair or component replacements, • Diagnose, repair and calibrate robotic total stations, • Repair, clean and calibrate pipe lasers, conventional total stations and auto levels, • Customer facing, discuss with customers status of products, repair cost, etc., • Completes paperwork associated with repairs and ordering of parts using laptop and desk computers to do paperwork, study repairs, ordering, etc., • Load firmware and upgrade firmware on devices, • Troubleshoot and repair electric masts, • Performs system testing with sample/live data and technology, • Utilizes Business Center software to update customer files, check for modeling errors and verify data, • Works with other departments to ensure that customer’s needs are met, • Pulls and prepares inventory in order to complete tasks, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Working knowledge of components, to include, but not limited to; GPS receivers, data collectors, tablets, radios, optical prisms, pipe lasers, total stations, auto levels, sanders, and robotic total stations, • Working technical knowledge of the afore mentioned components with the ability to diagnose, disassemble, repair, reassemble, and test repairs, • Knowledge of optical test ranges and methods, • Knowledge of and ability to use test benches and break-out boxes to test devices, • Strong computer skills and the ability to work in Microsoft Word, Excel, CAD, AGTEC, in addition to various warehouse and accounting programs, • Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams, • Strong electrical system experience. Ability to read and understand electrical system schematics and troubleshoot, • Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams, • Ability to cut, grind, weld, and solder, • Excellent work habits, accuracy, attention to detail, and quality of work, • Excellent customer service skills, • Verbal and written communication skills, • Ability to follow logical troubleshooting procedures, • Strong organization and time management skills, • Critical thinking and problem-solving skills, • Ability to work independently and as part of a team, • Ability to be self-starting and self-motivated, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • High school diploma or equivalent and some college, or additional technical training, required; a degree in a related field preferred, • Certification in Electronic repair or optical repair preferred, • Two years or more years of experience in the related field preferred, • Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Frequently communicates with others, must be able to exchange accurate information in these situations, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Occasionally lifts and moves materials and equipment up to 50 lbs., • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Requires wearing common protective or safety equipment, • Works in an enclosed and open vehicle or equipment, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels and body vibration. Works in confined work spaces, awkward positions, and high places, • Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job Description A leading electro-mechanical service provider in the Fort Worth/Dallas, TX area is seeking an experienced Electric Motor Field Service Technician to install, maintain, and repair electric motors and rotating equipment at customer sites across the region. This role is ideal for a technician who thrives on independence, excels in troubleshooting, and enjoys working in diverse industrial environments. Pay & Benefits • Pay up to $50/hr If your target pay is higher, we still encourage you to apply—we could request adjustments based on experience and market conditions., • Take home company vehicle + gas card, • Perform installation, troubleshooting, preventive maintenance, and repair on electric motors, pumps, gear reducers, and other rotating equipment., • Conduct field diagnostics including vibration analysis, balancing, laser alignment, and electrical testing., • Ensure proper tolerances, clearances, and mechanical fits during disassembly and reassembly., • Accurately document work performed, inspections completed, and test results., • Deliver exceptional customer service and maintain a professional presence on job sites., • Mentor and assist junior technicians when needed., • Follow all safety procedures including Lockout/Tagout (LOTO), PPE, OSHA standards, and confined space requirements., • Technical or vocational training preferred., • Minimum 5 years of field service experience working with motors or rotating equipment., • Level 2 Vibration Certification preferred., • Proficient with diagnostic tools, test equipment, and computer-based reporting systems., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently, communicate effectively, and manage time well., • Experience with laser alignment, vibration data collection, and balancing., • Familiarity with motor testing, electrical theory, and diagnostic software. If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description Holt CAT, the largest Caterpillar dealer of heavy equipment in the United States, is seeking an experienced Field Service Technician for the Fort Worth / Bridgeport Texas Region. The Field Service Technician's primary role is to conduct exceptional field service repairs, which include addressing problems such as pumps, hydraulics, engines, transmissions, HVAC, and electrical issues on heavy equipment like dozers, backhoes, front-end loaders, and excavators. Hours for this position will be Monday thru Friday 7am to 5pm, must be able to work overtime. Must have a valid driver license and a good driving record. Related construction equipment experience is preferred for this role. Must be able to obtain a CDL Class B. What can HOLT offer you? A competitive salary, front-loaded PTO, 401k matching plus a profit-sharing plan, comprehensive health care benefits, tuition reimbursement, wellness rewards, gym discount, an amazing employee development program with a department devoted to your professional development allowing you to grow your skills and build your competencies to prepare you for future opportunities at HOLT, and much more! T Education and Experience: • No Less than 4 (Four) years of diesel-powered heavy construction equipment repair experience in a field environment preferred, • CATERPILLAR Dirt Machinery Experience Required, • Ability to troubleshoot, diagnose, and repair equipment using electronic and manual equipment to determine failure., • Able to document all work orders properly, • Must be able to troubleshoot and diagnose Tier 4 systems., • Must b able to troubleshoot and diagnose EGR systems, • MSHA certification preferred, • Air conditioning certification preferred, • Crane/Rigger certifications preferred, • High school diploma or equivalent preferred, • Valid Driver’s license required, • Ability to obtain a valid Commercial Driver's License (CDL) and must have an acceptable driving record, • Must have all required mechanic hand and pneumatic tools (metric/standard), • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs advanced repairs and advanced troubleshooting offsite with minimal supervision, • Performs advanced troubleshooting and advanced diagnoses of equipment malfunctions and failures, • Removes and installs parts, disassembles and assembles basic components, • Tests, makes adjustments and verifies proper operation of all repairs and adjustments, • Prepares and completes all job-related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Maintains service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Completes assigned jobs and task to meet flat rate time and re-work standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance; may be relied upon to act as a mentor to lower level Technicians, • Requires regular and punctual employee attendance, • Knowledge of safe work procedures and practices, • Moderate to Expert knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Moderate to Expert knowledge of hydraulics, transmissions, engines, undercarriage, and electrical, • Proficient with current computer software, related hardware, and basic knowledge of machine electronic systems, • Exceptional skills in customer service, • Advanced diagnostic and troubleshooting skills, Knowledge of CAT ET and CAT SiS 2.0 preferred, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills of equipment or systems, • Equipment selection skills to determine the kind of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a crane and forklift, and obtain required certifications/licenses, • Ability to meet deadlines and work under fast-paced, time-constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 80 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet, and climb up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work #LI-HCT LI-JH1 #ZR#JH #CAT #Caterpillar #HOLTCAT #heavyequipment #dozer #excavator #motorgrader #scrapper #skidsteer #loader

Job Description For over 30 years, Mckinney Trailers has supplied the western United States, Arizona, Colorado, Utah, and Texas with high-quality equipment and reliable service. We offer a full range of tractor-trailer sizes, types, and options and are strategically located near key distribution points. Mckinney Trailer Rentals is a leading provider of trailer equipment for rent or lease. We leverage our diverse fleet of over 35,000 trailers to ensure you find what you need when you need it. SUMMARY The Branch Rental Operations Assistant position is responsible for supporting local branch operations through effective customer service. This position will handle multiple accounting, administrative, customer service, and inspection duties. Inspection Duties: • Complete inspections consistently utilizing the equipment inspection check list., • Climb into and on top of van trailers and flatbeds for inspection., • Compare outbound inspection to inbound inspection; report customer bill back for damages., • Maintain signs/tags/flags for out of service, sale and sold units., • Operate Yard Goat to move trailers as needed., • Set up new Vendors, issue purchase orders, prepare invoices for payment., • Set up new customers in the MMS., • Generate and process miscellaneous invoices for sales, repairs, and other needs., • Accounts receivable, make customer aging calls and or send out demand letters., • Process credit card payments and authorizations., • Manage all incoming and outgoing communications including phone calls, mail, e-mail, faxes, and overnight packages., • Maintain office supplies and oversee office equipment., • Maintain local licensing/registration paperwork/fleet vehicle licensing., • Open, process, and close rental agreements in computer and process related paperwork., • Initiate the mailing of new account application packets to prospective customers; process new account applications., • Plan, schedule, and dispatch drivers for pick-up and delivery., • Complete sales orders for reserved equipment., • Inquire with customers at check-in if equipment is returned damaged., • Perform weekly yard check for rental and resale inventory and reconcile information., • Receive customer service calls. Resolve and/or redirect customers; follows up on completion., • Control and track inventory, assign equipment, maintain documents and records. None. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE A college degree is not required, but preferred. High School Diploma or general education degree (GED); or six months to one year related experience and/or training; or equivalent combination of education and experience. OTHER SKILLS AND ABILITIES: • Strong work ethic and a desire to succeed., • Excellent communication skills, both oral and written., • Attention to detail and highly organized., • Current state driver’s license. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and governmental regulations. Ability to write reports and business correspondence. Ability to speak effectively before groups of customers or employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts such as fractions, ratios, percentages and proportions to practical situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk; climb or balance; reach with hands and arms; and to stoop, kneel, crouch or crawl. The employee regularly is required to sit. The employee is frequently required to stand, walk, and climb or balance. The employee is frequently required to use hands to finger, handle, or feel and to talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and ability to adjust focus. Must operate equipment such as phone, computer, copy machine, fax machine, fork truck, yard goat, hand tools and refrigerated trailers. WORK ENVIRONMENT While performing the duties of this job, the employee is occasionally exposed to wet, humid conditions; working near moving mechanical parts; and outdoor weather conditions. The noise level in the work environment is usually moderate. The candidate must be able to pass a pre-employment background check. Mckinney Trailers is an Equal Opportunity Employer. Company DescriptionFor over 35 years, Mckinney Trailers has led the way in trailer rentals and leasing across the United States. With a fleet of over 40,000 units and 20 branch locations strategically located near key distribution hubs, we provide a wide variety of semi-trailer types for clients across all industries. Our services include full-service maintenance, semi-trailer sales and purchases, as well as parking and transportation solutions. Known for high-quality equipment and outstanding customer service, Mckinney is the trusted partner you need in logistics. Rent, Lease or Buy from Mckinney Trailers. Visit over 35 years, Mckinney Trailers has led the way in trailer rentals and leasing across the United States. With a fleet of over 40,000 units and 20 branch locations strategically located near key distribution hubs, we provide a wide variety of semi-trailer types for clients across all industries. Our services include full-service maintenance, semi-trailer sales and purchases, as well as parking and transportation solutions. Known for high-quality equipment and outstanding customer service, Mckinney is the trusted partner you need in logistics.\r\n\r\nRent, Lease or Buy from Mckinney Trailers.\r\nVisit

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Project Manager is responsible for overseeing construction and owner‑direct projects from award through closeout, ensuring technical accuracy, financial performance, and customer satisfaction. This role partners closely with sales, operations, engineering, and subcontractors to manage scope, budgets, schedules, materials, and change orders. The position provides leadership throughout project execution, supports estimating and value engineering, resolves project risks, and ensures accurate forecasting, invoicing, and documentation. Ongoing communication with internal teams, customers, and external partners is critical to delivering successful projects and maintaining long‑term client relationships. Travel may be required based on project needs. Responsibilities: • Provides input to sales and operations regarding the technical and business considerations for construction or direct owner projects. This input could be associated with areas such as estimating, value engineering, timing, special resource needs, or other aspects peculiar to specific projects., • Ensures project is booked correctly and that all necessary forms are completed for both internal and external purposes., • Ensures project documents, estimate, and other information are available to all necessary personnel to maximize Bosch Building Technologies productivity on the project., • Determines if customer expectations are similar to Bosch Building Technologies and if these can be achieved based upon Bosch Building Technologies estimate or contractual scope. Provides feedback on this as appropriate internally and externally., • Identifies and resolves potential project issues., • Accurately forecasts costs for each area of the project and tracks these over time to achieve budget and forecast goals., • Invoices projects timely and is actively engaged in collections to minimize aging., • Coordinates material orders and timing with Material Coordinator to maximize cash flow and material handling efficiency. Ensures all equipment is compatible and will function properly to achieve the required sequences., • Coordinates with Subcontractors or internal installation team to achieve maximum value in installations., • Completes the monthly WIP re-forecast., • Recommends technical solutions to sales and operations. Assist Sales team during estimating phase., • Identifies change order opportunities and coordinates with sales to document, pursue, and book them., • Provide support to Bosch Building Technologies and other contractors to solve building operating issues that go beyond the controls or special systems operation., • Communicate with internal employees as required to ensure Bosch Building Technologies labor is accurate and timely and estimated productivity is achieved in all areas., • Provide leadership and input to others as requested or required to assist in the accurate estimation, design, installation, start up, commissioning, and training for building systems., • Communicate with external organizations as required such as consulting engineers, building owners, and other contractors to ensure accurate and timely engineering., • Provide support for ongoing service engineering and support for existing building systems., • Reviews all engineered submittals ensuring adherence to scope, budget, and customer expectations as well as location standards. As required, provide input on employee goals and progress on these to supervisors and managers., • Must be able travel for extended durations., • Other duties as assigned. Supervisor Duties: In accordance with applicable Company policies/procedures and Federal/State laws, will perform the following supervisory responsibilities: planning, assigning, and directing work; coaching and appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Required Qualifications: • BS (Computer/Electrical/Mechanical) Engineering, Construction Management or equivalent experience/training., • 3+ years of HVAC and/or Building Automation and Project Management experience., • 3+ years of Construction Project Management experience or related field, • Proficient in interpreting and managing billing processes, including understanding schedules of values., • Strong grasp of budgeting principles, including budget development, tracking, and forecasting., • An understanding of basic computer operating systems., • The ability to configure and debug basic computer problems., • Clear and concise ability to communicate verbally and in writing., • An ability to understand empathetically the issues and perceptions others have and to creatively and successfully work through these issues to achieve a successful outcome and customer and employee satisfaction., • Clean driving record Preferred Qualifications: • 2 year technical degree in Electronics or equivalent experience/training., • 5+ years of HVAC and/or Building Automation and Project Management experience., • 5+ years of Construction Project Management experience or related field, • Some experience with programming., • A clear ability to work with electronic equipment such as volt meters, amp meters, oscilloscopes, etc., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • A working understanding of AC power circuitry including breakers, multi-phase power, etc. (120VAC and greater), • Level 2 and Senior Project Managers have a very deep understanding of the DDC or special systems that control buildings. They also understand the other systems involved in the mechanical and electrical portions of building controls., • Level 2 and Senior Project Managers also have the experience to provide extensive integration support for a multitude of building systems., • Level 2 and Senior Project Managers also have the experience to provide extensive integration support for a multitude of building systems., • PMP certification preferred Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without Paladin colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: Up to 10%, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description A Field Service Engineer contributes to the success of Hartwig by keeping our customers' CNC machine tools running at peak operating levels by performing repairs. The customers we serve are in a variety of industries and rely on our team to repair, inspect and troubleshoot their equipment. Main responsibilities of this full-time role based in the Dallas, TX area include: • Conduct efficient and timely preventive maintenance to include changing fluids, filters and checking accuracy of calibrations, • Recommend maintenance modifications and improvements to machines, equipment and processes, • Train and instruct customers on preventive maintenance best practices, • Responsible to help with any service tool tracking on tools utilized., • Schedule preventive maintenance customer visits, • Increase field sales by promoting the PM program and other opportunities, • Conduct inventory counts, • Ability to complete necessary tasks in our service software and timecard system on a daily basis Individuals who ideally fit this role should meet the following qualifications: • Above average mechanical and electrical aptitude, • Relevant mechanical or preventive work experience, inspection and/or repair experience, • Demonstrated commitment to customer satisfaction, • Excellent attention to detail and follow through, • Ability to work independently, a go getter that finds the next customer that needs our help, • Someone who doesn't mind getting dirty or working in hot/cold environments Our team of over 200 professionals throughout the U.S. is dedicated to helping manufacturers control and power the growth of their business. To achieve this, we are given the tools and training for success. In addition to a comprehensive first year training program and on-going professional development, Hartwig provides a full benefit package including health, dental, vision, life and disability insurances. Compensation is also a key element in your decision to join the team. Our 401k program has a 20% match and employees are bonus eligible. As a Service Engineer, you will also be provided a uniform allowance, laptop, cellphone and company vehicle. With over 60 team members who have been with us 10 years or longer and over 12,000 installations since our founding in 1960, the company has gained a reputation for superior service, integrity and support. We would be honored to have you consider joining our team. Hartwig, Inc., including all operating subsidiaries, is an Equal Opportunity Employer - M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class.

Job Description Integrative Emergency Services, LLC ("IES") is looking for a Provider Credentialing Coordinator to work directly with health care Providers, facility Medical Staff Offices (MSOs), and Credentials Verification Organizations (CVOs) to ensure providers secure and maintain privileges to work at assigned medical facilities. Will be working in a hybrid capacity at the corporate office in North Dallas, TX, 75244. IES is dedicated to cultivating best practices in emergency care, providing comprehensive acute care services, creating value, and supporting patients, employees, clients, providers, and physicians in pursuit of the highest quality health care. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following. Others may be assigned. • Manage assigned book of business throughout the initial and reappointment process, • Prepare provider credentialing files for required ACOs (Accountable Care Organizations)., • Create credentialing files and enters all pertinent credentialing information received from the provider's initial and reappointment application. Upload supporting documents to the document vault in the company database., • Coordinate file reviews for accuracy and prepares discrepancies for quality review and approval., • Research and obtain verification of clinicians' medical experience, professional references, state licensure, DEA registration, DPS credentials, and other required documentation., • Coordinate with facility, centralized verification services, medical staff, and clinicians to complete privileging process, including any additional documentation, references, and applications using consistent follow-up as necessary., • Facilitate the State required collaborative agreement and APP supervision process., • Provide routine status updates for each assigned book of business in the system dashboard, • Maintain company database with current documentation, licensure and updated demographics., • Maintain accurate site rosters with current privileged providers at all times., • Ensure providers maintain all current licensure and certifications to remain active at hospitals., • Collaborate with multiple teams and departments across organizations to impact outcomes, • Build strong relationships with clients, providers, and Medical Staff Offices, • Support and lead hospital credentialing efforts for new clients Knowledge, Skills, Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Excellent interpersonal, organizational, and verbal/written communication skills, • Result and detail oriented with ability to drive assigned task to closure in a fast-paced environment., • Ability to manage multiple priorities, • Strong customer service orientation, • Ability to use discretion appropriately and maintain confidentiality, • High levels of proficiency with MS Office applications including Excel, • Familiarity with databases Required: • High school diploma or equivalent experience, • Minimum 1 year of credentialing experience, • 2-4(+) Years of Provider Credentialing experience ideally in hospital settings, • Specific vision requirements include the ability to see at close range, distance vision, peripheral vision, depth perception, and the ability to adjust focus, • While performing the duties of this job, the employee is regularly required to talk and hear, • Frequently required to stand, walk, sit, use hands to feel, and reach with hands and arms, • Possess the ability to fulfill any office activities normally expected in an office setting, to include, but not limited to: remaining seated for periods of time to perform computer based work, participating in filing activity, lifting and carrying office supplies (paper reams, mail, etc.), • Occasionally lift and/or move up to 20-25 pounds, • Office environment - 4835 Lyndon B Johnson Fwy #900, Dallas, TX 75244, • This is a hybrid role with a strong emphasis on onsite presence and communication., • Regular attendance at the office is essential to support work initiatives and respond to in-person requests., • Standard business hours apply, with flexibility as needed to accommodate early mornings, evenings, or occasional weekend projects and meetings. The company is committed to creating a diverse, inclusive, and equitable environment and is proud to be an equal opportunity employer. Qualified applicants of any age, race, religion, nationality, sexual orientation, gender identity or expression, disability, or veteran status will receive equal consideration for positions. We welcome people of diverse backgrounds, experiences, and abilities and believe that the unique experiences of our team drive our success. Powered by JazzHR Az46wun2VW

Job Description Holt CAT is the largest Caterpillar dealership of heavy equipment in the United States. We have a full-time, Electrical Power Generator - Field Service Tech position available at our Irving, Texas location. The hours of the position are Monday-Friday from 7 AM to 4 PM. Possible overtime, including weekends. Daily travel and overnight travel are required throughout Texas. Job Description : This position is responsible for providing troubleshooting and high-quality repair service on power generation, gas and diesel engines, and ATS (Automatic Transfer Switches), to respond to customers, needs in a positive, safe, and timely manner to ensure maximum value for work performed. What can HOLT CAT offer you? • A competitive salary, commensurate with your experience and competencies., • A comprehensive and robust benefits program that includes complete health care, 401(k) matching & Profit-Sharing plan (ROTH and traditional), paid holidays, and a front-loaded PTO program., • A Tuition Reimbursement program to support the pursuit of accredited college courses. A qualified candidate must have the following skills or abilities: • At least 5 years of field or shop service tech troubleshooting and repair skills of Electrical Power and Generator - experience required., • At least 5 years of field or shop service tech troubleshooting and repair skills of Natural Gas and Diesel Engine - experience required., • At least 5 years of field or shop service tech troubleshooting and repair skills of ATS (Automatic Transfer Switches) - experience required., • Excellent customer service skills. Must be able to effectively communicate, both written and verbal, with customers and employees in a professional manner., • Must have own tools for both electrical and mechanical., • Must have a valid Texas driver's license., • Must have a safe driving history. No major infractions., • Must pass a DOT Physical and maintain a medical card, • Ability to be productive by working efficiently and effectively with a high energy level., • Ability to work with limited supervision., • Must be able to work Monday-Friday from 7 AM - 5 PM, and overtime as required., • Must be on-call two weeks out of the month. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job Description Job Summary: The Field Service Technician I provides face-to-face customer service located at an off-site location and is responsible for minor troubleshooting, diagnosing, repairing, and reconditioning of various light and heavy industrial rental equipment. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources;3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs minor repairs and minimal troubleshooting offsite with minimal supervision, • Performs minor troubleshooting and minimal diagnoses of equipment malfunctions and failures, • Removes and installs parts, disassembles and assembles basic components, • Tests, makes adjustments, and verifies proper operation of all repairs and adjustments, • Prepares and completes all job-related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Maintains service vehicle inspection records, daily inspections, and driver logs as required by the Department of Transportation, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicles in a good, clean, and working order, • Communicate job progress to supervisor and customer as needed, • Completes assigned jobs and tasks to meet flat rate time and re-work standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance; may be relied upon to act as a mentor to lower level Technicians, • Requires regular and punctual employee attendance, • Knowledge of safe work procedures and practices, • Basic knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Basic knowledge of hydraulics, transmissions, engines, undercarriage, and electrical, • Demonstrates proficiency with current computer software, related hardware, and basic knowledge of machine electronic systems, • Exceptional skills in customer service, • Basic diagnostic and troubleshooting skills, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills of equipment or systems, • Equipment selection skills to determine the kind of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a crane and forklift, and obtain required certifications/licenses, • Ability to meet deadlines and work under fast-paced, time-constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • More than one year of industrial equipment experience required; two or more years preferred, • High school diploma or equivalent preferred, • MSHA certification preferred, • Air conditioning certification preferred, • Valid Driver’s license required, • Ability to obtain a valid Commercial Driver's License (CDL) and must have an acceptable driving record, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 80 lb, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet, and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Requires wearing common protective or safety equipment, • Regularly works outdoors around moving mechanical parts and noise level may be loud at times, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Required to perform work in cramped spaces and/or high places Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HIR #LI-NV1

Job Description SUMMARY The POS Field Service Technician is accountable to ensure timely response to all service requests for customer sites in their assigned territory. Overall responsibility includes ensuring customer needs for any POS hardware, as well as additional hardware, issues that are reported are responded to, and the appropriate troubleshooting, diagnostics, repair, and thorough testing are completed. Additional hardware may include laser printers, meat scales, and wrappers, network equipment, etc. The POS Field Service Technician is responsible to maintain current accurate spare parts/equipment inventory, as well as very strong emphasis on timely and accurate documentation and records. RESPONSIBILITIES Someone in this position at TRUNO will: • Respond to all service requests timely, keep customer fully updated, and ensure service call completions are documented accurately with comprehensive details, as well as ensure any parts/equipment used are appropriately accounted for, • Interact with store personnel and Truno team in a positive manner and easy to understand by the people being communicated with, • Maintain ability to work regular hours, as well as after-hours availability when needed, • Willing to travel when needed, typically within a 150-mile radius, limited overnight travel, • Responsible to troubleshoot, fault isolate, repair, and test to verify proper functionality of any in-store equipment assigned to provide service for, • Able to use tools, including basic power tools, in the performance of assigned duties, • Provide preventative maintenance to customers on in-store POS equipment, as well as additional hardware, laser printer, meat scales and wrappers, network equipment, etc., • Perform basic configuration of software and hardware, and perform installs and upgrades, as needed, • Organized, well prepared, and maintain professional appearance and conduct, • Maintain strict confidentiality and adhere to company policies, • Adhere to specific deadlines and timelines, • Accountable and responsible to maintain company provided vehicle, company credit card, fuel and fleet maintenance card, Netbook PC, tools and test equipment, as well as any additional company provide resources., • Maintain technical and product knowledge on all equipment sold and supported in your assigned Service Territory Someone in this position at TRUNO should have: Education Associates Degree in Information Technology or related Technology Field (Preferred) Experience • Minimum 1 year of experience in technology service (Preferred), • Prior retail experience (Preferred), • Familiarity with Windows and Microsoft Office (Required), • CompTIA A+ Certification (Preferred), • CompTIA Network+ Certification (Preferred), • Exceptional customer service orientation (Required), • Basic Break/Fix Computer skills (Required), • Basic PC operations/software knowledge (Required), • Excellent oral and written communication, including communicating in a way that a non-technical end user and/or Team members and Managers can understand (Required), • Understanding of Networks and Wireless devices (Preferred), • Proficient with use of common hand tools and basic test equipment (Required), • Ability to work independently, as well as in a team environment (Required), • Capable of multi-tasking, with ability to think, learn, and solve problems quickly (Required), • Ability to effectively prioritize and execute tasks in a high-pressure environment (Required), • Confidentiality and integrity (Required), • Detail oriented (Required), • Medical, • Dental, • Vision, • Life and Supplemental Insurance, • Pet insurance, • Short/Long term disability, • Paid holidays, • Paid vacation and sick time, • Paid birthday About TRUNO Retail Technology Solutions: For more than 40 years, Truno has been partnering with grocery retailers to identify the technologies they need to help them navigate an industry that's ever-changing and increasingly competitive. Truno offers point-of-sale systems and an integrated suite of technologies that can help grocery stores reduce costs, extend the life of technology investments, run more smoothly, and improve customer service.

Job DescriptionDescription: Program Manager - Power Distribution Location: Dallas, TX (Remote) Are you an experienced Program Manager looking to join a supportive, passionate team? We have an attractive opportunity for you! ABOUT THIS OPPORTUNITY: As the Program Manager, you will oversee program execution from start to finish, providing strategic direction, mentorship to project managers, and exceptional client relationship management. You'll collaborate with cross-functional teams, monitor KPIs, optimize workflows, and ensure projects are delivered on time, on budget, and to the highest standards. This is not an Information Technology-related position. If you do not have experience managing power distribution engineering/design projects, you will likely not be considered for the position. Note: This position can work remotely, but new hires will be required to come to our headquarters in Perrysburg, OH, for an initial 2-week in-person paid orientation and training period. Responsibilities: Project Leadership: · Responsible for measuring and developing the project manager's abilities and effectiveness through KPI's and setting core competencies in accordance with corporate governance. · Work closely with cross-functional teams to ensure smooth project implementation and customer satisfaction. · Attend industry events, conferences, and networking opportunities to enhance the company's visibility. · Serve as a mentor and coach to other project managers, offering guidance and support. Program Planning and Strategy: · Oversees project managers in the delivery of all program-related projects in accordance with the contractual agreement, scope, schedule, and budget of the project. · Oversee the planning, scheduling, and execution of all phases of projects within the designated program in accordance with project management processes, policies, guidelines, and corporate governance. · Develop and monitor high-level project workflows, validate project scopes, and collaborate on project priorities. · Oversees the creation of proposals, kickoff meetings, and discovery calls. Program Monitoring and Reporting: · Prepare, review, and approve project change orders and/or correction actions in collaboration with the client, Project Engineer(s), and Operations Manager. · Provide program cost forecasting over the life of the project or program. Program Closure: · Ensure the successful closure of the program, including finalizing all program activities, obtaining acceptance from stakeholders, and conducting post-program evaluations. · Document lessons learned and share best practices with the organization. Communication: · Maintain clear and consistent communication with program stakeholders, including executive leadership, project managers, and cross-functional teams. · Provide regular program updates to management and stakeholders. · Resolve conflicts and facilitate effective communication within the program team. · Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure deliverables, requirements, schedules, cost, and meeting plans are communicated. · Accountable for contractual correspondence and communication with all stakeholders, including identification and reporting of risks, liabilities, and opportunities. Risk Management: · Identify potential risks and issues that may impact project success and develop risk mitigation plans and contingency strategies. Monitor and manage risks throughout the project life cycle. Budget Management: · Manage Program level P&L reporting. Customer/Client Relationship Management: · Build and maintain strong relationships with existing clients, understanding their needs and providing exceptional service. · Build relationships with Sr. Leadership within the customer organization. · Build an understanding of the customer’s organizational structure and decision-making process. · Identify and understand client challenges, propose solutions, and tailor product/service offerings accordingly. · Conduct thorough market research to stay informed about industry trends, customer preferences, and competitor activities. · Lead Program update calls and in-person meetings with external clients. · Monitor and manage expectations of communication between staff and external clients. · Develop and execute a strategic plan to identify and target new business opportunities in the market. · Collaborate with the sales team to develop sales strategies, set targets, and achieve revenue goals. · Prepare and deliver compelling presentations and proposals to potential customers. · Negotiate contracts and terms of agreements with clients, ensuring a win-win outcome for both parties. · Maintain accurate and up-to-date records of sales activities and client interactions in the CRM system. · Keep abreast of the company's product/service offerings, updates, and enhancements. · Other duties as assigned. Competencies: Fit/Gap Analysis | Needs Analysis | Project Administration | Project Controls | Project Development | Project Estimation | Project Evaluation | Project Implementation | Project Lifecycle Management (PLM) | Project Management | Project Planning | Project Portfolio Management (PPM) | Project Scheduling | Project Status Reporting | Scope Management | Stakeholder Management | Project Management Software | Customer Satisfaction | Vendor Management | Contract Negotiation Requirements: WHAT WE'RE LOOKING FOR: • Education Requirements – Bachelor’s of Science in Engineering/Engineering Technology or Bachelor's of Business Administration; or an equivalent combination of education and experience., • Experience Requirements - A minimum of 7 years of experience in the Power Utility Industry with engineering, operations, and /or project management, including financial oversight and personnel development. And a minimum of 3 years of functional, or direct people management experience, with the proven ability to lead, motivate, and influence., • Project Management Certification (PMP) or equivalent certification required., • Proven experience in project management, with a track record of successfully delivering projects on time and on budget., • Strong leadership, communication, and interpersonal skills, with the ability to manage multiple stakeholders with competing priorities., • Must be results-driven with a dedicated focus on achieving successful project performance, customer satisfaction, and organic sales growth., • Demonstrated a level of understanding of commonly used project management concepts, practices, and procedures., • Adaptability and problem-solving abilities., • Exceptional attention to detail and organizational skills., • Available during the “core” work hours of 8:00 a.m. to 5:00 p.m. Evening and weekend work may be required as duties demand., • Willing and able to travel regularly (30%+), which will include planned overnight travel, • Dependable transportation, a valid driver’s license, and insurance, • Able to pass a background check/drug test/driving record check., • Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time., • Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time., • Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting. Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law. PM22

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Project Specialist I supports the service, maintenance, and implementation of security and life safety systems for industrial and commercial applications. The position offers hands‑on experience across the full-service while building technical skills, troubleshooting capabilities, and customer‑facing communication in a collaborative engineering environment. This specific position is a service tech whose primary goal is the servicing and upkeep of our local DFW customer base and the various security and life safety systems deployed therein. Responsibilities:. • Service, maintain, and inspect currently installed security and life safety systems (SLS)., • Read and update final technical documentation for completed projects (As-Builts)., • Troubleshoot, service and program intrusion, surveillance and access control systems., • Provide technical support and troubleshooting assistance for other technicians, customers, and sales teams., • Responsible for maintaining current technical, interpersonal, and communication skills through continuous education/development. (school, reading, seminars, industry group membership, etc.), • Ability to transition to assist the installation department as needed., • Maintain clean driving record., • Must be able to access and inspect all areas of customer SLS systems., • Must be able travel as required., • Other duties as assigned. Required Qualifications: • Minimum of high school diploma or Electronics related studies preferred., • 5+ years of experience in Security and Life Safety field., • Familiarity and experience with the following intrusion systems: Bosch (Radionix), Honeywell, DSC, • Familiarity and experience with the following surveillance systems: Bosch (Radionix), Avigilon (On-Prem and Cloud), Milestone, Genetec (On-Prem and Cloud), • Familiarity and experience with the following access control systems: Bosch (Radionix), Avigilon (On-Prem and Cloud), Ccure, Hirsch, Genetec (On-Prem and Cloud), Lenel, • FAL License., • Knowledge and proficiency with intrusion, access control, video (analog and digital) and fire system installation and programming., • Able to self-manage and operate in a remote environment as needed., • Capable of operating with little guidance and supervision., • Proficient in Microsoft Office., • Excellent organizational skills and attention to detail., • Excellent written and verbal communication skills., • Excellent analytical problem-solving skills and attention to detail., • Clean driving record, • 20% travel as needed. Preferred Qualifications: • 10 years of experience in Security and Life Safety environment., • Current Bosch certification., • Current Avigilon certification., • Current Lenel certification., • Current Genetec certification., • Current Milestone certification., • Current Ccure certification., • Proficient in Microsoft Office. In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without Bosch Building Technologies’ colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Company provided vehicles are to be maintained per policy and kept in a clean, serviceable manner., • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description About Mobile Air & Power Rentals Mobile Air provides temporary cooling, heating, dehumidification, and power solutions. With our rental portable air conditioners, cooling towers, chillers, heaters, dehumidifiers, generators, and power distribution, we can cover all power and HVAC rental needs nationwide. We provide solutions that help people save time and money by renting the equipment that builds our communities, improve businesses, and helps create memories at special events. If you have a passion for helping others, then join a $65 billion industry that reflects today’s sharing world by creating experiences that change communities—and lives. Discover your purpose – work in rental! Position Overview: This position will be responsible for diagnosing problems, performing repairs, conducting routine maintenance on our generators, provide technical support to Service Technicians in the field, and may be deployed to the field for major field troubleshooting/repairs at customer sites if necessary. This position will require a strong understanding of electrical systems, diesel engines, and power generation in order to perform their job effectively. This involves an extensive knowledge of how to safely operate equipment while maintaining proper safety protocols. Responsible for maintaining and completing all required documentation of work performed. Principle Duties: • Install, maintain, and repair generators and other mechanical equipment according to company standards, to include meeting local, state, and federal regulations., • Perform preventative maintenance on generators, including but not limited to oil changes, filter changes, and belt replacements. This is for preventative maintenance that is required between customer rentals and annual preventative maintenance., • Perform repairs or replace defective parts and work with leadership if repairs need to be outsourced to a third-party generator repair facility., • Respond to service calls in a timely manner and troubleshoot problems over the phone or in person as required. Provide support to Service Technicians who are deployed to a customer site to repair/troubleshoot generator., • Assist or may lead large field installations and aid technicians that are deployed to do temporary generator installations. This may include travel to job sites., • Serve as Primary Technician for all large KVA generators and associated equipment stored at this location., • Will be a primary contact for the region as our rental fleet becomes remotely monitored., • Provide mentoring and training for Service Technicians that are based in Mobile Air/Resolute Branches and Depots., • Associate degree or technical degree in diesel mechanics, power generation, or a related field preferred., • 5-years’ experience in generator maintenance, installation, and repair, • Strong knowledge of diesel engines, • Strong understand of electricity, electrical circuits, and electrical safety, • Must be a self-starter and have ability to work with minimal supervision, • There is some required travel to support installation, troubleshooting, and potential support/training at other MAPR locations, • Travel is expected and will include overnight stays., • Ability to lift 50 pounds using safe work practices., • Valid Driver’s license with a driving record that meets Company standards., • Competitive hourly pay, • Quarterly bonus!, • Entry level positions need little to no experience, • Health, Vision, and Dental Insurance, • Life Insurance, • 401k with company match, • Paid time off (vacation, sick, holidays), • Career development, • Employee discount programs #LI-Onsite

Job Description Job Title: Store Market Leader Department: Stores Reports to: Regional Sales Director Status: Full-time (Exempt) Location: Farmers Branch, TX Related Job Titles: District Manager, Regional Store Leader, Multi-Store District Manager, District Leader, Area Manager, Retail District Manager- Multi-Location Oversight, Retail Market Leader, Territory Manager – Retail Stores, Retail Operations District Manager Job Summary: Store Market Leaders manage a home store and lead a group of SSG stores with the Regional Sales Director. Market Leaders develop and maintain an exceptionally trained home store team that can operate autonomously, allowing them to build and maintain strong partnerships and consistently communicate with the Regional Sales Director and the team of Store Managers. A strong emphasis is placed on leading by example, accompanied with a servant mentality. Working for SSG will provide you with: • An organization which is built on its people, where every person truly matters., • Competitive compensation package with additional earning opportunities through incentives and initiatives., • Excellent benefits package for full-time employees including vacation pay, sick time, health, dental, vision, 401k retirement plan with a company match, and great discounts on exclusive haircare products., • Partnership with a dynamic team of leaders in a fun, exciting industry., • Lead and Develop Store Team, • Effectively manage time to remain focused on supporting the Store Manager Team., • Attract, hire, retain, develop, and lead a team of driven, goal-oriented Store Managers., • Mentor Store Managers through regular coaching., • Provide ongoing development opportunities that strengthen leadership skills for the Store Manager team., • Foster a fun, challenging, and rewarding culture., • Drive Sales Performance, • Encourage consistent focus on sales growth, customer service, merchandising, and operation through regular communication., • Analyze sales performance and initiate strategies to motivate and achieve success., • Support the Regional Sales Director to grow revenue through strong partnerships and communication with the outside sales team. Maintain Standards of Excellence • Reinforce exceptional store experiences, built on strong partnerships through purposeful conversations., • Maintain a high visual standard of merchandising display techniques and well-kept store environments., • Regularly visit stores and identify/report areas for improvement., • Manage and execute regular store inventories., • Lead by example, serving as the role model in all aspects and functions of the business including personal conduct, appearance, and attendance. Requirements: You have a minimum of 3 to 5 years of industry supervisory experience or applicable retail supervisory experience. • Previous multi-unit experience is strongly preferred, • You have a background in the beauty industry, • You possess an entrepreneurial mindset and clear-thinking skills, • You’re a confident leader and decision-maker, • You possess solid financial analysis skills, • You’re organized and enjoy managing multiple projects, • You’re willing to be “hands on” when necessary and lead by example, • You have a proven track record of job stability/tenure, • You’re successful at building and maintaining relationships, • High school diploma, • Management/leadership experience preferred, • Lift up to 30 pounds, • Stand/walk up to 8 hours, • Health, Dental, Vision, Life, and AD&D Insurance available, • Health Savings Account or Flexible Spending Account, • Employee Assistance Program, • 401 (k) Retirement Plan - SSG matches 50% of the employee’s contributions up to 2% of their yearly income, • PTO, • Holiday pay, • Sam’s Club membership for you and a friend or family member, • Discounts on exclusive hair products, • Employee referral program - $1,000 potential earnings per referral SSG is an EQUAL EMPLOYMENT OPPORTUNITY/AFFIRMATIVE ACTION employer. Candidates are considered for employment with SSG without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, veteran status, or other classification protected by applicable federal, state or local law. Related searches: Multi-unit manager, store manager, beauty, retail, management, B2B

Job Description Job Summary: Provides exceptional customer service while inspecting, repairing, and providing maintenance to trucks, trailers, and attachments for On-Highway vehicles. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots, diagnosis, and repairs On-Highway trucks both Cat and OEM, • Performs engine and related equipment repairs on Trucks and Trailers, • Disassembles, inspects, determines parts required, and reassembles to factory specifications within TRGs, • Adheres to contamination control and HAZMAT rules and regulations, • Provides quality control/assurance inspections of completed tasks to include road testing, • Uses computers and related software to assist in diagnosing and reprograming engines, • Completes documentation for service reports, timecards, parts requisition and returns, • Maintains all company equipment, tools, and vehicles in a good, clean, and working order, • Interprets and utilizes information from operating, maintenance, online resources, and service manuals/bulletins, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Travels to and from the job site and travels to retrieve parts, • Listens and understands customer complaints, quotes and explains repair costs, and schedules appointments with customers while providing clear communications, • Orders parts needed to complete repairs, • Completes and files documentation necessary to justify billing, • Responds to customer needs after hours when needed, • Communicates job progress to supervisor and customer as needed, • Works overtime as required by workload and customers’ needs, • Maintains a P Factor of 100% or greater, • Maintains less than .5% rework for years total sales, • Projects professionalism with both internal and external customers, including personal appearance, • Acts as a mentor and coach to lower level Technicians, • Completes all assigned Technician Training Path courses and safety training, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Knowledge and proficiency with current computer software, related hardware, and On-Highway Truck electronic systems diagnostic tooling, • Knowledge and ability to explain how various systems function on trucks and trailers, • Operation and control skills of On-Highway Trucks & Trailers, • Problem-solving and troubleshooting skills, • Verbal communication skills, • Exceptional skills in customer service, • Excellent time management and organizational skills, • Ability to follow logical troubleshooting procedures, • Ability to learn and navigate various software for both CAT and OEM, • Ability to work independently and as part of a team, • Ability to be self-starting and motivated, • Ability to operate a conventional forklift, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair and overhead crane, • Ability to operate an On-Highway Truck on public roads, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • High school diploma or equivalent, accreditation from a technical school or an applicable skilled trades program required, • Minimum of three years of experience required, • CDL – Class A or B required, • ASE Certifications preferred, • Has met HDSI requirements for Service Field Tech 1; Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools, • On-going Safety Training required Supervisory Responsibilities: • None Travel: • Travel up to 40% and overnight travel may be required Additional Requirements: • Must own and maintain the necessary tools to efficiently perform the job, • Must have a clean driving record Physical Requirements: • Significant amount of time sitting, standing, walking, kneeling, crouching, stooping, crawling, climbing, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Communicates with customers, service managers, and co-workers, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Frequently lifts and moves materials and equipment up to 70 lbs., • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Frequently works outdoors around moving mechanical parts and exposed to weather extremes that include inclement weather, heat, cold, and humidity, • Exposure to minor burns, cuts, bites, or stings, • Exposure to small quantities of chemical, dust, steam, high-pressure water, and high speed rotating equipment, • Exposure to hazardous conditions and contaminants, • Works in an enclosed vehicle or equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description RESPONSIBILITIES: This position is responsible for performing high-quality lubrication and periodic maintenance service work on heavy equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. REQUIREMENTS: This position requires a self-motivated, detail-oriented individual with a high energy level who must be able to: • Work alone with a limited amount of supervision, • Correctly service equipment with proper fluids and filters, • Complete machine inspections, • Minimum of 2 years heavy equipment repair experience, ability to work a flexible schedule required Mon - Friday - 6 AM - 5 PM and working at least 2 Saturdays per month and travel overnight about 4 days per month #LI-TFR #LI-HCT #LI-MFG #LI-HIR #CAT #CATERPILLAR #HOLTCAT

Job DescriptionDescription: About Heritage Auctions Start your career with one of the nation’s fastest-growing auction houses. Heritage Auctions is a global auction house driven by curiosity, innovation, and the stories behind extraordinary objects. For nearly 50 years, Heritage has connected collectors and consignors through a dynamic marketplace that celebrates history, culture, and craftsmanship. Headquartered in Dallas, Texas, with offices in New York, Chicago, Beverly Hills, London, Hong Kong, and other major cities, we support a worldwide network of experts and enthusiasts across more than 50 auction categories. From Sports and Entertainment memorabilia to Luxury Handbags, Fine Art, Jewelry, Coins, Wine, and rare historical artifacts, every item tells a story. We are dedicated to bringing those stories to life through deep research, cutting-edge technology, and thoughtful presentation. Known for our expertise and innovation, we offer a dynamic environment where passion for history, culture, and storytelling brings collectors together to discover, learn, and collaborate. SUMMARY: Responsible for processing incoming consignments and communicating the status with customers within our World and Ancient Coins department. BENEFITS: • Medical, Dental, Vision coverage, • Paid time off, • 401k savings plans LOCATION: South of Dallas/Fort Worth International Airport, NW corner of W. Airport Freeway (Hwy. 183) and Valley View Lane ESSENTIAL DUTIES & RESPONSIBILITIES: Duties include, but are not limited to, the following: Process incoming consignments accurately and efficiently, including: • Opening packages, • Labeling and verifying the contents of packages, • Creating an electronic report for the consignment, • Communicate with clients in all aspects of the consignment, • Research the status of consignments, • Return client material, • Perform department-wide inventories of consignment material, • Assemble client information packets, • Experience in a customer service position or industry, • Proficiency in Microsoft applications, specifically Word and Excel, • Ability to prioritize and multi-task and pay great attention to detail Heritage Auctions welcomes and encourages applications from women, minorities, veterans, mature workers, and persons with disabilities. EOE

Job Description Job Summary: Diagnoses, repairs, reconditions, and adjusts key systems and components of trucks and related equipment. Mid-level position – Generally has more than three years of experience and/or demonstrated job relevant knowledge/skills. A level two technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level two technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; often a team member on a large project. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses moderately complex engine malfunctions and failures with direction and minimum supervision, • Performs thorough engine and related equipment repairs on trucks and trailers with direction and minimum supervision, • Disassembles, inspects, determines parts required, and reassembles to factory specifications within TRGs, • Provides quality control/assurance inspections of completed tasks to include road testing, • Uses computers and related software to assist in diagnosing and reprograming engines, • Completes documentation for service reports, timecards, parts requisition and returns, • Interprets and utilizes information from operating, maintenance, online resources, and service manuals/bulletins, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Works overtime as required by workload and customers’ needs, • Projects professionalism with both internal and external customers, including personal appearance, • Acts as a mentor and coach to lower level Technicians, • Completes all assigned Technician Training Path courses and safety training, • Consistently maintains an average rework of less than 1%, • Ensures a positive average variance consistently, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Ability to meet all requirements as outlined in Leveling Description Guide to include; Basic Requirements, Electrical System, Engine Systems, AC/Heat System, Fuel System, Compressed Air Systems, Cooling System, Rear Differential, Intake/Exhaust Systems, Drive Train Components, Clutches, Tier IV Engine Emission Systems and Transmissions, • Ability to meet all technical and performance requirements for a level one technician, • Solid knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Sound knowledge and proficiency with current computer software, related hardware, and electronic systems diagnostic tooling, • Operation and control skills of vehicle fleet, • Problem-solving and troubleshooting skills, • Verbal communication skills, • Exceptional skills in customer service, • Excellent time management and organizational skills, • Ability to follow logical troubleshooting procedures, • Ability to work independently and as part of a team, • Ability to operate a conventional forklift, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair & overhead crane, • Ability to operate a vehicle on public roads, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools (Learn) Education and Experience: • High school diploma or equivalent, accreditation from a technical school or an applicable skilled trades program required, • At least two years of experience required, three or more preferred, • CDL – Class A or B preferred, • ASE – Medium/Heavy Truck Certification four or more preferred, • AC Certification Required, • Brake System Certification Required, • Has met HDSI requirements for Service Tech 1; Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools, • On-going Safety Training required Supervisory Responsibilities: • None Travel: • Up to 5% travel or overnight stays, • Up to 5% travel to other stores that require help during times of heavy workloads may be expected Additional Requirements: • Must own and maintain the necessary tools to efficiently perform the job, • Valid driver’s license and acceptable driving record Physical Requirements: • Significant amount of time spent standing, • Constant movement and use of hands, this position requires good manual dexterity, • Communication with customers and constant communication with co-workers, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Lifts and moves materials and equipment up to 50 lb, • Occasional kneeling, crouching, stooping, crawling, reaching, and balancing, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Frequently works in an enclosed vehicle or equipment, • Requires wearing common protective or safety equipment, • Exposure to high noise levels, • Works in extremely bright or inadequate lighting, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job DescriptionDescription: Night Auditor - 402150 Department: Rooms Reports To: Front Office Manager/Director of Front Office Operations FLSA: Non-Exempt Job Summary: The Night Auditor is responsible for balancing the revenue and expense transactions, handling the front desk duties during the overnight shift, and ensuring a smooth operation of the hotel during nighttime hours. The role also involves providing exceptional customer service to hotel guests. Essential Duties and Responsibilities: • Perform nightly audit of hotel transactions, ensuring that all financials are accurately balanced., • Handle all guest inquiries, providing information about the hotel, its services, and the local area., • Prepare and distribute daily reports to the management team., • Monitor the security of the hotel during the night, responding to any emergencies or disturbances., • Maintain the cleanliness and organization of the front desk area., • Provide wake-up calls and perform other guest services as needed. Qualifications: Education and Experience: • High school diploma or equivalent required., • Previous experience in a customer service role preferred., • Strong attention to detail and ability to work with numbers., • Excellent customer service and communication skills., • Ability to work independently and make decisions with minimal supervision., • Proficient in the use of computers and hotel management software., • Ability to handle multiple tasks and work under pressure. Reasonable Accommodations: The hotel is committed to providing reasonable accommodations to enable individuals with disabilities to perform the essential functions of the job. If you require an accommodation, please discuss your needs with the Human Resources department. Requirements: Physical Requirements: Ability to stand, walk, and remain in a stationary position for extended periods. Ability to lift, carry, push, or pull up to 20 pounds occasionally. Visual and auditory ability to operate office equipment, including computers and phones, and to respond to emergencies. Ability to perform repetitive motions, such as typing and writing. Work Environment: Work is performed in a hotel environment, primarily at the front desk. The position involves overnight shifts, including weekends and holidays.

Job Description Are you a genuine people person who excels with numbers and has a passion for providing excellent customer service? Our property is seeking a night auditor to join our growing group of hospitality professionals. We provide the training, tools, and team to help bring your career to the next level. If this sounds like an opportunity you’ll love, please start your application today! We have full-time and part-time openings. In addition, we have a full-time split position that will support the front desk and night audit. Schedule flexibility is needed for this role as well as overnight shifts. Responsibilities: • Respond to inquiries, process reservations and check-ins, delegate housekeeping, security, and service requests, resolve guest complaints, and other front office duties as required, • Provide exceptional service to all hotel guests during their stay, • Complete additional bookkeeping, administrative, and accounting procedures as requested, • Audit and reconcile all financial records such as cash drawer activity, credit card transactions, room charges, final bill preparation, and occupancy percentages, • Produce and distribute daily weekly, and monthly reports to hotel management, department heads, and general managerQualifications:, • Overnight shift; requires flexible hours, • Front desk clerk duties, guest services, night auditor or previous hospitality experience is preferred but not required, • Proficiency with computers is required; experience with reservation and accounting software is desired, • Great communications. and excellent customer service skills are required, • Diploma or equivalent from high school is required; some college is desiredAbout Company From the chic, mid-century, modern décor adorning our hotel to the eclectic dining options, Le Méridien Dallas by the Galleria is an oasis for destination shoppers and business travelers alike. Our North Dallas hotel is located steps from the upscale shops of the Galleria Dallas, as well as a wealth of local corporate headquarters.

Job Description Technology Systems Technician will work in all areas of the business as needed. Work will include, but is not limited to warehouse work, equipment preparation and programming, machine installation assistance, and class preparation. Take part in training, to expand knowledge of GPS products. The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models and processes to ensure alignment with our Vision, Values, and Mission., • Works in warehouse to include receiving stock, receipting into D365 F&O system, placing, and pulling stock from shelves, lifting products weighing up to 75lbs., • Prepares GPS products to include assembly, charging and programming firmware in the products using Trimble web site., • Works in field in all weather conditions to assist field technicians with installation, repair and troubleshooting of machine technology products. Field work will be dirty, greasy, and physically demanding work., • Assists trainer in the preparation for schools and associated field training activities. Work includes pulling, prepping, and set up of equipment for class, clean-up of gear and return of gear back to warehouse., • Participates in on-the-job learning of the D365 F&O computer system, Trimble website use and GPS product use and operation., • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Performs other duties as assigned. Knowledge, Skills, and Abilities: • Excellent work habits, accuracy, attention to detail, and quality of work., • Excellent customer service skills., • Verbal and written communication skills., • Ability to follow logical troubleshooting procedures., • Effective influencing skills which include teaching, motivating, and developing customers and employees., • Strong organization and time management skills., • Critical thinking and problem-solving skills., • Ability to work independently and as part of a team., • Ability to be self-starting and self-motivated., • Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects., • Ability to read, write, and understand information., • Ability to listen to and understand information and ideas presented through spoken words and sentences., • Strong computer skills and the ability to work in Microsoft Word, Excel, CAD, AGTEC, in addition to various warehouse and accounting programs. Education and Experience: • High school diploma or equivalent and some college, or additional technical training, required; Associates Degree in Survey, Auto, or Diesel Mechanics preferred., • Trimble Certified Trainer preferred., • Valid Driver’s License required. Supervisory Responsibilities: None. Travel: • Up to 30% travel may be required, to include overnight stays. Physical Requirements: • Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching., • Constant movement and use of hands, this position requires good manual dexterity., • Frequently communicates with others, must be able to exchange accurate information in these situations., • Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work., • Must be able to move objects and use abdominal and lower back muscles to provide support over time without fatigue., • Be able to maneuver safely and work underneath equipment., • Occasionally lifts and moves materials and equipment up to 75 lbs., • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment. Work Environment: • Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity., • Requires wearing common protective or safety equipment., • Works in an enclosed and open vehicle or equipment., • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment., • Works in extremely bright or inadequate lighting., • Exposure to high noise levels and body vibration., • Works in confined workspaces, awkward positions, and high places., • Exposure to minor burns, cuts, bites, or stings. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job DescriptionTitan is a leading national electrical contractor with locations in Florida, Georgia, Texas, North Carolina, Tennessee, and South Carolina. Titan maintains a strong reputation as a leading high-quality, customer-centric service provider which has resulted in strong financial growth since its inception in 2006. As a result, the company has become a trusted partner to its customers and suppliers and has established a proven track record of year-over-year growth. The company has significant opportunities to further penetrate its existing markets and expand into other geographies and service lines. We are URGENTLY hiring Commercial Electricians in the DFW Metroplex area. Our Commercial Electricians enjoy excellent benefits including: Paid time off – vacation and holiday401k MatchFree skills and safety training*Unlimited $1000 referral bonuses – FREE MONEY! We offer a competitive salary for Commercial Electricians. If you meet the qualifications, please apply now with your resume! COME JOIN THE TITAN ELECTRIC FAMILY! We look forward to hearing from you! Responsibilities • Execute plans of electrical wiring for well-functioning lighting, intercom and other electrical systems, • Install electrical apparatus, fixtures and equipment for alarm and other systems., • Install safety and distribution components (e.g. switches, resistors, circuit-breaker panels etc.)., • Connect wiring in electrical circuits and networks ensuring compatibility of components., • Prepare and assemble conduits and connect wiring through them., • Prevent breakdown of systems by routinely inspecting and replacing old wiring and insulated cables, cleaning circuits etc., • Perform effective troubleshooting to identify hazards or malfunctions and repair or substitute damaged units., • Other duties as assigned.Qualifications, • Proven experience as a Journeyman. MUST BE A LICENSED JOURNEYMAN FOR THE STATE OF TEXAS., • Experience in industrial and/or commercial electrical systems., • Demonstrable ability to use electrical and hand tools (e.g., wire strippers, voltmeter etc.) and electrical drawings and blueprints., • Thorough knowledge of safety procedures and legal regulations and guidelines., • Excellent critical thinking and problem-solving ability., • Excellent physical condition and flexibility to work long shifts and overnight., • Diploma in relevant vocational training or successfully completed apprenticeship as an electrician.Benefits, • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Referral program, • Tuition reimbursement

Job Description Overnight Concierge | Front Desk Agent (Overnight) Stratton Amenities is a hospitality-driven concierge services company providing luxury, hotel-style front desk concierge services for upscale apartment and condominium communities. Our mission is to deliver an elevated residential experience through warmth, professionalism, and attentive service, while ensuring residents feel comfortable, supported, and secure at all times. Position Overview We are seeking a professional, dependable, and hospitality-focused Overnight Concierge / Front Desk Agent to represent the community during overnight hours at a luxury residential high-rise. This role is ideal for a hospitality professional who thrives in a calm, composed environment and understands that overnight operations require both elevated service and strong situational awareness. The Overnight Concierge is responsible for delivering a warm and polished guest experience while also supporting overnight operations such as monitoring activity, conducting walkthroughs, responding to resident concerns, and documenting incidents as needed. During overnight hours, this role plays a critical part in maintaining order, professionalism, and continuity until the daytime team arrives. Schedule and Employment Type • Overnight shifts, including weekends and holidays, • Full-time and part-time positions available What We Offer • Competitive hourly pay, • Stable and consistent overnight schedules, • Professional, supportive, and team-oriented work environment, • Performance-based recognition and rewards, • Opportunity to work in luxury residential communities, • Growth opportunities within hospitality and residential services Key Responsibilities • Welcome residents and guests with professionalism, warmth, and discretion during overnight hours, • Serve as the primary overnight front desk representative and point of contact for the community, • Deliver anticipatory, hospitality-driven service while managing overnight operations, • Conduct routine walkthroughs of common areas, amenities, and the property to ensure cleanliness, safety, and policy compliance, • Monitor lobby activity, surveillance cameras, and building access points to support a secure and comfortable environment, • Respond calmly and professionally to overnight resident concerns, including noise complaints, access issues, and general disturbances, • De-escalate situations when appropriate and escalate concerns according to established protocols, • Accurately document incidents, complaints, and unusual activity through detailed incident reports and shift logs, • Answer, screen, and route phone calls using polished and professional telephone etiquette, • Accurately log, secure, and manage resident packages and perform package inventory audits, • Assist residents with reasonable requests including directions, amenity access questions, transportation coordination, and general inquiries, • Enforce community policies consistently, professionally, and discreetly, • Maintain confidentiality and exercise sound judgment at all times, • Ensure the front desk, lobby, and common areas remain clean, organized, and presentable, • Provide clear and thorough handoff notes to oncoming team members Position Requirements • Previous experience in hospitality, concierge services, front desk operations, hotels, luxury residential communities, night audit, or upscale customer service, • Minimum of 1 to 2 years of experience delivering exceptional guest or resident service, • Excellent verbal and written communication skills, • Strong problem-solving skills and ability to remain composed under pressure, • Calm, reliable, and professional demeanor, especially during overnight hours, • Strong interpersonal skills with a hospitality-first mindset, • Organized, proactive, and self-motivated with strong attention to detail, • Ability to multitask and prioritize in a dynamic overnight environment, • Takes pride and ownership in both the position and the property, • Maintains a neat, polished, and professional appearance, • Ability to work overnight shifts, weekends, and holidays, • Comfortable working independently while following established protocols Preferred Qualifications • Experience as a hotel night auditor, overnight concierge, or overnight front desk agent, • Experience in luxury residential, boutique hotel, or upscale hospitality environments, • Experience handling incident reports, noise complaints, and overnight resident concerns, • Familiarity with access control systems, surveillance monitoring, and package management tools, • Bilingual skills are a plus Equal Opportunity Employer Stratton Amenities is an equal opportunity employer. We believe diversity and inclusion are essential to delivering exceptional hospitality and building meaningful connections. We encourage applicants from all backgrounds who are passionate about service excellence and professional responsibility to apply.

Job DescriptionThe Account Manager (AM) at GuideStar Eldercare (GSE) has a primary role of vertical sales (Heads in Beds initiative) within GSE's existing, contracted long term care facilities. The AM additionally manages the implementation of GSE services with newly contracted facilities and addresses any issues concerns and questions facilities may have regarding GSE services. A customer service-oriented position, the AM will build relationships with existing customers while performing audits, educating facility staff, scheduling clinical visits, and assisting with marketing outreach and presentation to facilities when requested.Job Functions & Responsibilities: • The AM agrees to work as reasonably scheduled by Company., • Primary function of this role is to meet vertical sales goals established within the Heads in Beds (HIB) initiative. Autonomous field sales (growing referrals), independent decision-making, and building relationships with clients., • Must have reliable transportation between home and all assigned facilities in sales region., • Manages the implementation of GSE services with facility sites., • Provide education to facility staff regarding the referral process as well as informational materials., • Support clinician-facility interactions and serve as liaison; introduce providers to key facility personnel and expediate the onboarding (including facility walk-thru) and support of clinical providers with administrative issues encountered in facilities (passwords, EMR access, etc.)., • Develop client service improvement strategies in conjunction with GSE regional, clinical, marketing, and operations management/teams. Lead the implementation of such strategies., • Serve as primary GSE contact with facility staff. Maintain up-to-date records of facility contacts. Perform soft surveys of customer satisfaction. Track and trend client issues to identify patterns that require process improvement., • Services provided by the AM shall be performed almost exclusively at independent and distinct facilities (i.e. nursing homes and assisted living facilities). Travel by car may be required daily, of which overnight stays may be approximately 5-10%., • Meet established monthly vertical sales goals for Heads in Beds initiative., • Performs audits to identify patients within facilities who are eligible for GSE services. Consult with long term care facility staff to strategize and implement a referral plan., • Maintain and grow relationships with staff at client facilities.Benefits of Working Here:, • Employee's medical premiums are 100% company paid, • $50,000 in basic life and AD&D insurance coverage is provided, • GuideStar 401(k) plan, • 3 weeks (15 days) paid time off plus 7 paid holidaysQualifications:, • High School diploma or GED equivalent required. Bachelor’s degree in Social Science/Social Work preferred., • 1-3 years of proven successful field sales experience OR 1-3 years of experience in an administrative role at a long-term care facility., • Proven ability to work autonomously with little direct supervision., • Excellent proficiency in customers service and sales., • Organized and resourceful. Excellent time management skills. Ability to multi-task., • Available for remote work or facility events some evenings and weekends., • Proficiency with MS Office suite of products, especially Word, Excel, and PowerPoint., • Abel to effectively and professionally communicate with individuals at all levels of GSE or client organizations., • Able to pass background testing, including motor vehicle record review and drug screening., • Valid driver’s license, • Active auto insurance policy, • Must be able to drive an average of two to four (2-4) hours daily between home and all assigned work facilities. Ability to drive in the dark is required. Must be able to transition between stationary positions and moving about facilities. May occasionally need to position self to reach items under or behind desks. Opens and closes doors. Often operates a laptop. Occasionally climbs stairs. Occasionally moves or transports supplies weighing up to 10 lbs. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are searching for an enthusiastic, service-focused hotel front desk agent to join our guest services team. You’ll welcome guests, manage accounts, answer inquiries, and field complaints to ensure we deliver an excellent experience to every guest. You will bring excellent communication skills and a passion for putting our guests first. If you love interacting with people in a positive work environment, apply now! We have full-time and part-time openings. In addition, we have a full-time split position that will support the front desk and night audit. Schedule flexibility is needed for this role as well as overnight shifts. Responsibilities: • Give every guest a warm welcome, check them in, and check them out when they leave, ensuring you provide correct keys and room numbers, • Mitigate customer complaints as needed, • Connect with the housekeeping department to ensure guest accommodations are ready, • Bookkeeping: keep accurate records of all hotel guest account information, • Take incoming calls, online and in-person room bookings requests, and answer questions about guests’ needs involving room rates, available rooms, amenities, rewards programs, and special requestsQualifications:, • Possesses strong customer service skills, interpersonal skills, organizational skills, and time management skills, • Well-versed in taking telephone calls and handling stressful situations, • 1 year of experience in the hospitality industry as a hotel front desk agent, hotel receptionist, or guest service specialist preferred, • Must have graduated high school, received a GED or equivalent, • Has previous experience or working knowledge of Microsoft Office and reservation management systemsAbout Company From the chic, mid-century, modern décor adorning our hotel to the eclectic dining options, Le Méridien Dallas by the Galleria is an oasis for destination shoppers and business travelers alike. Our North Dallas hotel is located steps from the upscale shops of the Galleria Dallas, as well as a wealth of local corporate headquarters.

Job Description Night Auditor – Kompose Hotel Location: Dallas, Texas Employment Type: Full-Time, W2 Schedule: Overnight shifts (11:00 PM – 7:00 AM), including weekends and holidays Pay Rate: $17 per hour Pay Frequency: Weekly Benefits: Company‐paid medical, dental, and vision + PTO + holiday pay About Kompose Hotel Kompose Hotel is a modern, design‐focused property where smart technology, comfort, and elevated service meet. We pride ourselves on delivering a creative, seamless, and memorable guest experience. We’re searching for a Night Auditor who can bring professionalism, calm, and exceptional service to our overnight operations. Position Overview As the Night Auditor, you will serve as the overnight guest liaison and handle the hotel’s nightly financial reconciliation. This role is essential to ensuring smooth operations from one day to the next. Key Responsibilities • Assist late‐arriving guests with check‐ins, check‐outs, and inquiries, • Complete nightly audit procedures and reconcile daily financial transactions, • Monitor hotel security and ensure guest safety throughout the night, • Perform light housekeeping or basic maintenance tasks as needed, • Resolve guest concerns with professionalism and care, • Maintain a clean, organized, and secure front desk environment What You Bring • Customer service experience; hotel front desk or night audit experience preferred, • Strong attention to detail and comfort with numbers and reporting, • Familiarity with hotel PMS systems (StayNTouch is a plus), • Ability to work independently and stay alert during overnight hours, • Professional communication and problem‐solving skills, • Dependable, calm, and guest‐focused mindset What We Offer • $17 per hour (W2), • Weekly pay, • Full company‐paid medical, dental, and vision benefits, • Paid time off and holiday pay, • Employee discounts on hotel stays

Job DescriptionMEMBER SERVICES REPRESENTATIVE (OVERNIGHT)Front Desk Associate Part Time or Full Time, Hourly Job Family: Club Staff Location:1500 S Beltline Rd, Mesquite, TX 75149 Reports to: Managing Partner / Assistant General Manager Looking for a member services representative who is responsible for providing exceptional customer service to our club members and staff for the overnight shift at Crunch Fitness - Undefeated Tribe. Undefeated Tribe is an official franchise of Crunch Fitness based in Austin, TX. The Undefeated Tribe is the fastest growing franchise group and is expanding the Crunch Fitness brand across Texas, Oklahoma, New Mexico and Missouri. The Undefeated Tribe was named Franchise of the Year in 2021 and 2024 and will be inviting over 1000 individuals to join our team to help our community experience fitness, wellness, relaxation, and recovery. From our clubs to headquarters, Undefeated Tribe is a collaborative, fast-paced, and engaging place to work. It’s vital to our success to continue to take risks and think big. This takes tons of hustle, creativity, and boldness. The Undefeated Tribe strives to enrich the lives of others through the power of well-being. Position Overview The Member Services Representative creates a warm, kind, and hospitable environment for team members and members alike, are passionate about fitness and excited about serving others, and help to deliver our purpose “to enrich the lives of others through the power of well-being.” You are an optimistic person that has a naturally persuasive style. You are good at communicating in a demonstrative instructional way, as you like to chit-chat when meeting others. You enjoy harmony within the workplace and prefer being the facilitator of information as opposed to the resident technical resource. You are energetic and like variety when it comes to doing multiple tasks. Your communication is loaded with details and delivered in quick bursts. You prefer things being tidy, done correctly and being put away in their proper place. You require direction, rules and structure in your format. Once you become familiar with a process, you will tend to become more comfortable and develop your skills and decisions based on history. Responsibilities • Greets all members & guests with a smile and enthusiasm, including consistently demonstrating the dials of member engagement as part of the Crunch SLA process, • Assists with membership, retail and tanning product sales, • Promotes membership privileges including tanning, group fitness, small group training and childcare, • Delivers on new member enrollment expectations, including guest conversion, Peaks %, ACH %, and CrunchOneKickoff standards, • Checks in all members and guests in accordance with company procedures, to include resolving any member check-in with an alert, • Answers phones in a courteous, helpful, professional manner, • Communicates special events to members and guests, • Facilitates all member requests or forwards to a manager, • Maintains a professional and courteous disposition, • Is an expert in all club facility, services, programs and schedules/hours of operation, • Maintains a clean and organized work area, • Able to navigate all stations of the front desk area, to including check-in, Relax & Recover, guest services, and membership sales, • May be asked to clean beyond shift duties to support a clean, crisp, grand-opening ready facility, • Performs opening and closing checklist and duties Required Skills & Experience, • Minimum 1 year of experience in a service-oriented position preferred, • Ability to communicate effectively and demonstrate proficiency in reading and writing skills required, • Strong customer service orientation, • CPR/AED certification required (can be obtained within 30 days of hire) Physical Requirements, • Must be able to lift or move up to 50 lbs, • Physical effort required for daily duties include prolonged standing and walking Education Requirements, • PTO, • Subsidized health insurance coverage (health, dental, vision) for full time positions, • Basic Life and AD&D, • HSA, • Short-term disability EQUAL OPPORTUNITY EMPLOYER UDT is an Equal Opportunity Employer, a drug-free workplace, and complies with ADA regulations as applicable. UDT provides equal employment opportunities to all employees and employment applicants and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Please note that Crunch Fitness - Undefeated Tribe does not offer visa sponsorship or support visa transfers for this position. Applicants must be authorized to work in the United States without the need for current or future visa sponsorship. At Crunch Fitness - Undefeated Tribe, we are always on the lookout for exceptional talent to join our team. Some of the roles listed are part of our evergreen hiring strategy, meaning we consistently seek to build a pipeline of qualified candidates. While not all positions may be actively hiring at this time, we encourage you to apply if the role aligns with your career goals. Your application will be considered as opportunities become available. Join us in making Crunch Fitness the talk of the town! Apply now and be a driving force in transforming lives through fitness.

Job DescriptionDescription: Summary: Works with the Sales Representatives to identify customers for Finished Product and Drapery Hardware sales. Teach/assist in measuring for drapery and hardware. Give guidance on Hardware motorization and installation. Quote and order finished products and hardware for customers. Essential Duties and Responsibilities: • Represents and manages Fabricut, Stroheim, Vervain, S. Harris and Trend in a professional manner and appearance., • Develop and maintain good relationships with current and potential customers., • Advises customer as to kind and quantity of fabric needed for Window Treatments and appropriate hardware for specific uses., • Discusses features and qualities of fabric such as weave, texture, color and usage., • Teach customers how to navigate the Fabricut websites for Finished Product and Hardware., • Educates/assist customers how to accurately measure window treatments and hardware., • Enters Quotes for widow treatments and hardware., • Respond to customer’s questions and problems on a timely basis and offer a solution as quickly as possible, mediating and resolving challenges fairly., • Interfaces with other departments to provide good service., • Displays good safety and housekeeping practices., • Uses material and equipment effectively., • Performs other duties as assigned., • High school diploma or equivalent., • 3-5 years’ experience with Window Treatments required, • Drapery and Hardware knowledge required., • Workroom knowledge beneficial., • Ability to learn product lines., • Excellent organizational skills., • Superb interpersonal skills., • Must be able to work effectively with others., • Excellent communication skills, verbal and written., • Must be able to travel overnight within the sales territories., • Attend Sales meeting in Tulsa OK twice per year., • Excellent driving record. The essential functions of this position include, but are not limited to the following: In terms of an 8-hour workday, this position requires: • 3 hours sitting, • 3 hours standing, • Bending/Twisting – Up to 2 hours, • Reaching – Up to 2 hours, • Lifting – Up to 2 hours, • Pushing/Pulling - Up to 2 hours, • Speaking – 4 to 6 hours, • Writing – Up to 2 hours, • Typing or CRT Inputting – 4 to 6 hours, • Filing – Up to 2 hours, • Climbing – Up to 2 hours, • Reading – 4 to 6 hours, • Hearing – 6 to 8 hours, • Right foot – Driving, • Simple Grasping – Up to 2 hours, • Firm Grasping – Up to 2 hours, • Being around moving machinery - Up to 2 hours, • Exposure to changes in temperatures and humidity - 2-4 hours

Job Description Nationwide Search - Relocation and opportunities to travel available One of the fastest growing manufacturers of mission critical power equipment is seeking Field Service Techs to oversee the installation and commissioning of their equipment. The right candidate will have a background doing low to mid voltage electrical work and some formal education; trade school, military, or on the job. Though no formal certifications are required. The right candidate will be customer focused, attentive to detail, and a solid communicator both verbal and written. The person will be charged with the start up, commissioning, trouble shooting, and repair of power equipment such as PDUs found in data centers. So experience and aptitude in electrical installations, repairs, and service for sophisticated equipment is a plus. Field Service Techs will travel to job sites. Overnight travel can be mitigated by living in or relocating to areas where the work is abundant. -Pay for this role will range from $35-50hr with ample OT available -Fully vested 401k day 1 - 100% match up to 6% of salary -2 weeks PTO day 1 -EOY bonus based on company and individual performance -Opportunities for quick growth within a rapidly growing company. First promotion expected within 2 years -Relocation available for qualified candidates #IND2

Job DescriptionDescription: The Field Operations Specialist is a versatile professional responsible for comprehensively understanding and executing existing company processes. This role is primarily focused on training, job performance, and adaptability, with a key emphasis on supporting sales-related activities, providing service advice, and seamlessly stepping into various roles when necessary. The specialist’s expectation is to increase or maintain the gross profit of a location. This role will require heavy travel throughout the region and around 10% overnight travel. Key Responsibilities: Process Training and Execution: • Thoroughly understand and master existing company processes related to sales, service, and operations., • Train team members on established processes to ensure consistent and high-quality execution., • Act as a floater, ready to step into the positions of Service Advisor, Service Manager, or General Manager during periods of underperformance or the absence, • Engage in remote sales activities, leveraging technology and communication tools., • Provide support and guidance to remote sales teams, ensuring alignment with company goals and maintaining customer satisfaction., • Identify underperforming areas and collaborate with team members to implement improvements., • Proven experience in sales, remote work, and field operations., • Excellent understanding of company processes and a track record of successful process execution., • Strong interpersonal and communication skills., • Ability to adapt to changing roles and responsibilities., • Proficiency in remote work tools and technologies., • Problem-solving mindset and ability to troubleshoot issues remotely., • Adaptability to different roles and responsibilities., • Results-driven with a focus on maintaining or increasing gross profit., • Strong leadership skills for floating roles., • Collaborative and team-oriented., • Strong commitment to process adherence and improvement.

Job DescriptionDescriptionWildlife Exclusion Technician Commercial Retail • Grocery • Big Box • Home Improvement You’re detail-oriented. You like working with your hands. You enjoy variety and staying active. At Meridian, our Wildlife Exclusion Technicians focus on prevention and versatility. This is a hybrid role—when you’re not assigned to exclusion installation projects and you will be fully trained and work as a Wildlife Removal Technician in your home market. That means steady work, broader skills, and more opportunities to grow. This role is perfect for someone who enjoys skilled installation work, problem-solving, and hands-on field service. Key ResponsibilitiesWhat You Will Do • Install bird exclusion systems including netting, wire, spikes, and structural deterrents., • Perform exclusion work at commercial retail, grocery, and big box locations., • Work at heights using ladders, lifts, and required safety equipment., • When not assigned to exclusion projects, perform bird removal services., • Follow all safety protocols, quality standards, and company procedures., • Read work orders, site plans, and installation specifications., • Communicate clearly with supervisors, teammates, and customers., • Document completed work and site conditions accurately., • Maintain tools, equipment, and vehicles in safe working condition., • Enjoy skilled, hands-on work with variety., • Are comfortable working at heights and using ladders or lifts., • Like both installation work and active field service., • Have strong attention to detail and take pride in quality., • Work well independently and as part of a team., • Take safety seriously and follow procedures., • Communicate respectfully and professionally., • Adapt easily to changing job sites, schedules, and assignments.Must Have:, • Construction, General Laborer, or facilities experience., • Lift, ladder, or fall protection training., • Wildlife control, pest control, or bird control experience preferred., • Mechanical or installation background. Schedule, • Full-Time Role, • Schedule may include early mornings, nights, or weekends depending on customer needs and project schedules., • Nationwide Travel 60% - 70%, • Exclusion projects involve scheduled nationwide travel with overnight stays, generally limited to one-week project assignments., • Travel is organized in advance and balanced with home-market work between projects.Why Technicians Choose Meridian, • Consistent work and broader skill development., • Full training provided for both exclusion and bird removal., • Clear expectations and strong field leadership., • High-quality work you can take pride in., • Competitive hourly pay (based on experience), • Mileage Reimbursement, • Incentive Pay Opportunities for Bird Removal., • Health, Dental, and Vision Full-Time Benefits, • Paid Time Off & Paid HolidaysLocation Requirement, • Position supports commercial locations nationwide for exclusions and within the assigned region for bird removal., • Must be willing to travel nationwide for exclusion projects., • Must be will to travel for bird removal work within your regional market.If you’re looking for a role that combines skilled installation, hands-on field work, and steady opportunity, apply today to join Meridian as a Wildlife Exclusion Technician. To learn more, visit us here

Job Description Overnight Front Desk Associate- Grand Prairie Club HERE WE GROW AGAIN! Are you ready to leave average behind and join a high-performance team on the rise? CR Fitness is seeking Front Desk Associates who bring energy, hustle, and a winning mindset. With 90+ clubs open and 100+ planned, this is your opportunity to grow with one of the fastest-expanding fitness brands in the industry. At Crunch Fitness, we fuse fitness and entertainment to create an environment where serious results meet serious fun. We live by a No Judgments philosophy and are looking for driven individuals who are passionate about fitness, delivering exceptional service, and thriving in a high-paced, team-first culture. Working at Crunch isn’t just a job, it’s a launchpad for career growth, leadership development, and personal success. If you’re motivated, competitive, and ready to make an impact, apply today and be part of our unstoppable momentum. Job Summary: As a Front Desk Associate, you are the first and last impression of the Crunch brand. You play a vital role in creating a high-energy, positive atmosphere while delivering exceptional customer service. This position is performance-based and includes engaging with prospective members, selling memberships, promoting club services, and ensuring every guest and member has an outstanding experience. What We’re Looking For: • Positive, high-energy attitude with a passion for helping others, • Team player with strong communication and organizational skills, • Results-driven mindset and willingness to go above and beyond, • Sales or customer service experience (preferred), • Bilingual Spanish/English (a plus), • Professional, reliable, and coachable, • Ready to contribute to a winning team culture, • Medical, Dental, and Vision Insurance, • 401(k) with company match, • Paid Time Off, • Life Insurance and Short-Term Disability, • Complimentary Crunch Membership, • Discounted Personal Training, • Career advancement in a rapidly growing company About CR Fitness CR Fitness is a leading franchisee of Crunch Fitness. The company is rapidly expanding its club footprint throughout Florida, Georgia, North Carolina, Texas, Tennessee, and Arizona and is led by a veteran management team with over one hundred years of combined experience in the fitness industry. With a comprehensive fitness offering and affordable price point, Crunch Fitness offers unmatched value to its members regardless of fitness level and is well positioned to take advantage of consumers’ increasing focus on health and wellness. Crunch Fitness is an equal opportunity employer and does not discriminate against any employee or applicant for employment based on race, color, religion, national origin, age, gender, sex, ancestry, citizenship status, mental or physical disability, genetic information, sexual orientation, veteran status, or military status. Powered by JazzHR BsMigiNppe

Job Description Water Treatment Chemical Technician for Data Centers—Based in Dallas, Texas The Water Treatment Chemical Technician will be responsible for travelling to multiple customers’ data centers in Texas, and in other states in the US while they are under construction. This new Technician will travel to our customers’ data centers and will help with the start-up of the water treatment systems. You will solve customer water treatment concerns, perform water treatment lab work, commission new piping and system assets, and troubleshoot water treatment and control equipment at our customers’ massive data centers. As a Chemical Technician, you will receive an industry competitive salary, expenses, and benefits. In addition, ample technical support is provided along with continuous training. Compensation is based upon experience and the ability to succeed. $60,000 to $80,000 first year base for a qualified candidate. Plus a year-end bonus! Car Allowance & Expenses. We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Benefits include a corporate 401k, health, dental, vision, and life insurance. Garratt-Callahan (wwwgarrattcallahan.com) is family friendly, profitable, stable, and fiercely private. No layoffs in 100+ years. No ownership changes in 100+ years. 75+ straight years of profitability. We have operations from Asia, to the Caribbean, and in every state in the USA. Let's talk. Job Responsibilities: • Support start-up of water treatment systems at customer data centers., • Treat industrial cooling towers and process water systems to keep them energy efficient and environmentally friendly., • Perform detailed water testing & analyses at data centers., • Travel 30 to 40% of the time., • Solve customers' water problems., • Commission newly installed assets and control equipment., • Reports directly to the Construction Manager., • Keep our existing customers happy and safe. About Garratt-Callahan: Garratt-Callahan is a US based private 100+ year old, nationwide water treatment chemical company. Garratt-Callahan treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, salespeople in every state, and operations in Asia, the Pacific, and the Caribbean. Benefits: • We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k., • First year compensation $60,000 to $80,000 depending on experience, plus bonus., • A car allowance, • Advanced training, and a clear career path., • Family friendly, flexible hours., • A huge benefit of working for Garratt-Callahan is our stability and low turnover., • No Layoffs in our 100+ year history., • G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2. To Apply, please log on to: Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. Requirements: You will be a successful applicant if you have a technical degree such as Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Paper Science, or Water Resources. You must have a 4-year technical degree in the sciences to qualify for this position. A successful applicant must have experience or interest in learning advanced water treatment technologies. A successful applicant must be detail-oriented, adhere to safety protocols, and be able to lift 50 pounds wearing PPE in all weather conditions. Overnight travel, and sometimes extended travel. One year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in or near Dallas, TX. Additional Preferred Qualifications: • Familiarity With Industrial Cooling Towers, • Knowledge and Proficiency with Lab Procedures, Water Equipment, & Water Chemistry, • Ability to Provide Virtual Presentations to Group, • Experience Working in a Team Setting as a Collaborative Partner If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at 650.697.5811. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. This phone number is only for disability assistance. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, us water, veolia, Suez, ge water, chemtreat, drew industrial, solenis, chem-aqua, kurita, evoqua, fremont, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, data center, Dallas, DFW, Texas.

Job DescriptionDescription: Job Title: Interior Designer Accountable To: Studio Manager FLSA Classification: Regular Full Time Exempt (Salary) Who We Are SHM Architects, PLLC is a Dallas-based architecture, landscape, and interior design firm with extensive experience in master planning, single-family residential, retail, commercial, and healthcare architecture. A review of our portfolio will show no singular “style,” reflecting our design philosophy that unites the client’s programmatic requirements, budget, and a healthy respect for the site. We are ordinary people that are extraordinarily good at our work. Through the collaborative process and strong working relationships, we believe our portfolio reflects a more thoughtful and engaging work than that achieved by a single individual. For more information, please visit our website at What We Believe Our passion is enriching lives by enhancing the beauty of our environment. We believe creating beautiful designs with purpose requires two things: passion and time. Our clients understand that, while our process may be uncompromising, it results in personalized, luxurious designs that are never flashy, and are always aspirational. SHM Core Values: • Embraces Imperfect Beauty, • Engaged to Make a Difference, • Displays Humility and Compassion, • Individually Driven Are you individually driven and engaged to make a difference at work and in the community? Would others describe you as a lifelong learner dedicated to taking a relaxed approach to finding new ways of solving complex design problems? Does the idea of crafting projects that last for generations excite you? Are you comfortable embracing imperfect beauty? If you answered yes, then read on! A Day in the Office Looks Like This: The Interior Designer works simultaneously on a variety of projects supporting the Interior Design Studio staff in the daily operations and individual design teams throughout all phases of projects. • Performs assignments under the direction of more experienced staff, including but not limited to project administration, schematic design, design development, and contract document administration, • Develops and manages project schedules and budgets with responsibility to keep project on schedule and manage additional services, • Curates cohesive design solutions of interior finishes, fixtures, furniture, and accessories within the clients desired budget and necessary lead times informed by the project's completion, • Assists in computer production of preliminary plans and coordinates finish plans, specifications, materials selections, and redlines, • Assists in preparation of client presentations and participates in client and contractor meetings, • Collaborates with contractors and vendors to select furniture, materials, and other interior products to satisfy the client’s design requirements, • Coordinates and determines all FF&E issues, including budgeting, resourcing, specifications, proposals, orders, tracking, and delivery of items, • Maintains physical and digital resources, including organization, updating, and maintaining inventory of finish library as well as product representative contact information, • Can think creatively – big thinker, • Able to work both independently and in a collaborative team environment, • Able to work on multiple projects simultaneously and meet deadlines, • Detail-oriented and organized with excellent time management skills, • Capable of maintaining focus in an open office environment, • Strong customer service skills for interface with clients, vendors, and contractors, • Competitive salary with additional bonus opportunities, • Medical insurance 100% paid for employee only, based on coverage selected, • 100% paid short- and long-term disability and group life & AD&D insurance for employees, • Other voluntary benefits like dental, vision, additional life insurance, accident insurance, critical illness insurance, Legal Shield/ID Shield, and pet insurance, • Annual healthy living benefit, • Free use of Energy Square Fitness Center for employees, • HSA quarterly employer contributions, • Safe Harbor 401(k) retirement plan with company contributions whether you contribute or not, • Personalized PTO, • Five (5) paid holidays plus a winter break typically 12/24 through 1/1, • Paid leave for new parents (birth, adoption, placement / maternal and paternal) to support work/life balance and family bonding, • Professional development opportunities, • Paid covered parking for all employees This position has no supervisory responsibilities. Work Environment Indoor office environment. Normal work hours are 8:30 AM – 5:30 AM Central Monday through Friday with one hour for lunch. There may be a need to work outside of normal work hours or weekends to meet project deadlines. Some local travel is required. There may be an occasion that requires overnight travel. Physical Demands Work performed requires the ability to lift as much as 25 pounds, sit, stand, walk, operate a keyboard, and communicate clearly and effectively on the phone, in-person, and via written communication. Work Authorization Requirement Must be authorized to work in the US when an offer of employment is accepted. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification form (Form I-9) upon hire. Affirmative Action/EEO Statement It is the policy of SHM Architects, PLLC to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information, or any other protected characteristic under applicable law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements: • Bachelor’s degree in Interior Design from a CIDA-accredited program, • Must have experience in luxury residential design, • Licensure not required but preferred, even if in process, • Mid-level position for 3-6 years of professional experience, • Ability to source and curate a design for luxury-minded high net-worth clientele with follow through to installation, • Experience with construction documents, • Proficient in AutoCAD and/or Revit, • Proficient in Microsoft Office 365 suite of products, • Exposure or experience with Sketch-Up and Studio Webware, • Proficient with technical detailing, • Strong sketch capabilities

Job Description Benefits • Vehicle Reimbursement Program, • Medical, dental and vision plans, • Paid holidays and PTO, • Company equipment, Comprehensive compensation for travel (hotel and meals), • Cell phone reimbursement Description Position is responsible for driving revenue growth, expanding market presence, and strengthening brand awareness within an assigned territory. Serving as the authorized account representative, this role develops and maintains strong supplier and customer relationships while executing integrated sales and marketing strategies. The position supports account growth through product knowledge training, merchandising execution, inventory management and in-store support to maximize sales performance and customer satisfaction. Job Duties: Ability to perform all essential responsibilities for the Market Sales Manager is to include: • Travel to customer locations to perform sales, support services and product knowledge training for vendor products in assigned stores, • Responsible for building and maintaining strong supplier and customer relationships to increase sales, • Create market feedback reports regarding customers and competitors; provide recommendations for new products based on market trends, • Support and provide product knowledge to customers by demonstrating and providing product application training, • Respond to customer sales and technical inquiries in a timely and professional manner, • Resolve customer and supplier concerns or disputes effectively, • Collaborate with key stakeholders to identify new sales opportunities, • Facilitate sales, marketing and promotional campaigns by acquainting accounts with the latest sales techniques, • Resolve any customer and vendor differences, • Assist with placing special orders, • Execute merchandising initiatives, including planogram compliance and maintenance of product displays, • Manage and maintain inventory levels, make adjustments as required, • Attend and represent the trade / industry shows and training sessions as required, • Create and report sales impacts to management, • Travel with AMS Regional Manager designated and/or Customer Manager when necessary, • Comply with all AMS and Customer policies and procedures, • Travel required which includes overnight stays, • Ability to work varied hours/days as business dictates is required, • Must be Microsoft Office proficient, • Bilingual (English-Spanish) language proficiency a plus, • Excellent communication, presentation, written and technical skills required, • Must possess a valid driver’s license and provide proof of insurance (must meet company’s minimum requirements), • Provide excellent customer service to customers and vendors, • Required to lift up to 50 lbs., • Frequent standing, bending and twisting required, • HS diploma or equivalent required, college degree preferred, • 2 years of sales/commercial product experience preferred, • 1 year of field sales/customer service experience preferred

Job Description Benefits • Vehicle Reimbursement Program, • Medical, dental and vision plans, • Paid holidays and PTO, • Company equipment, Comprehensive compensation for travel (hotel and meals), • Cell phone reimbursement, • 401(k) and Employee Stock Ownership Plan AMS is an ESOP company! 100% Employee owned! Description Position is responsible for driving revenue growth, expanding market presence, and strengthening brand awareness within an assigned territory. Serving as the authorized account representative, this role develops and maintains strong supplier and customer relationships while executing integrated sales and marketing strategies. The position supports account growth through product knowledge training, merchandising execution, inventory management and in-store support to maximize sales performance and customer satisfaction. Job Duties: Ability to perform all essential responsibilities for the Market Sales Manager is to include: • Travel to customer locations to perform sales, support services and product knowledge training for vendor products in assigned stores, • Responsible for building and maintaining strong supplier and customer relationships to increase sales, • Create market feedback reports regarding customers and competitors; provide recommendations for new products based on market trends, • Support and provide product knowledge to customers by demonstrating and providing product application training, • Respond to customer sales and technical inquiries in a timely and professional manner, • Resolve customer and supplier concerns or disputes effectively, • Collaborate with key stakeholders to identify new sales opportunities, • Facilitate sales, marketing and promotional campaigns by acquainting accounts with the latest sales techniques, • Resolve any customer and vendor differences, • Assist with placing special orders, • Execute merchandising initiatives, including planogram compliance and maintenance of product displays, • Manage and maintain inventory levels, make adjustments as required, • Attend and represent the trade / industry shows and training sessions as required, • Create and report sales impacts to management, • Travel with AMS Regional Manager designated and/or Customer Manager when necessary, • Comply with all AMS and Customer policies and procedures, • Perform other related duties as assigned Requirements • Travel required which includes overnight stays, • Ability to work varied hours/days as business dictates is required, • Must be Microsoft Office proficient, • Bilingual (English-Spanish) language proficiency a plus, • Excellent communication, presentation, written and technical skills required, • Must possess a valid driver’s license and provide proof of insurance (must meet company’s minimum requirements), • Provide excellent customer service to customers and vendors, • Required to lift up to 50 lbs., • Frequent standing, bending and twisting required, • HS diploma or equivalent required, college degree preferred, • 2 years of sales/commercial product experience preferred, • 1 year of field sales/customer service experience preferredCompany DescriptionAMS Retail Solutions was founded in 1999 as a small vendor representation team dedicated to increasing sales for one client. Since that humble beginning, AMS has developed into a North American force of professionals who serve a variety of retail product lines. AMS has grown to now employ retail professionals in all 50 states and Canada. Our tremendous expansion is due to our commitment to exceeding our clients’ sales and merchandising goals while offering competitive prices and highly differentiated service. AMS has earned its reputation for executing properly and on time. We are a recognized leader in our industry and we continue to set the standard for excellence. Employee owned since 2019!AMS Retail Solutions was founded in 1999 as a small vendor representation team dedicated to increasing sales for one client. Since that humble beginning, AMS has developed into a North American force of professionals who serve a variety of retail product lines.\r\n\r\nAMS has grown to now employ retail professionals in all 50 states and Canada. Our tremendous expansion is due to our commitment to exceeding our clients’ sales and merchandising goals while offering competitive prices and highly differentiated service.\r\n\r\nAMS has earned its reputation for executing properly and on time. We are a recognized leader in our industry and we continue to set the standard for excellence.\r\n\r\nEmployee owned since 2019!

Job DescriptionCompany Description About Chamberlain University Chamberlain University has a 130-year history and the mission to educate, empower, and embolden diverse healthcare professionals who advance the health of people, families, communities, and nations. Our regionally accredited University is comprised of the College of Nursing and the College of Health Professions. Our College of Nursing offers a Bachelor of Science in Nursing (BSN) degree program at 23 locations and online post-licensure degree programs and certificates including RN to BSN, RN to MSN, a Master of Science in Nursing (MSN) with six Specialty Tracks, and a Doctor of Nursing Practice (DNP). Our College of Health Professions offers online options with a Master of Public Health degree, Master of Physician Assistant Studies, Public Health Certificate programs, and a Master of Social Work degree. Learn more about Chamberlain University, part of Covista, at There is one very significant way Chamberlain is different than other Universities - Chamberlain Care®. Healthcare education is offered in a culture of service excellence and care in four ways: care for self, care for colleagues, care for patients/clients, care for all. By living Chamberlain Care®, we’ve built a culture in which colleagues and students thrive and we graduate extraordinary healthcare professionals who transform the health of people worldwide. Chamberlain Care® is the guiding principle we provide to each other and to our students to help our students achieve their goals, reach their dreams and impact healthcare at a national level. If you're ready to live Chamberlain Care®, we invite you to apply today! We operate on a hybrid schedule with four in-office days per week (Monday–Thursday). This approach enhances creativity, innovation, communication, and relationship-building, fostering a dynamic and collaborative work environment. Visit Covista.com for more information and follow on Twitter and LinkedIn. Job Description Opportunity at a Glance Looking for Part-time Pediatric Clinical Faculty interested in teaching students in our Bachelor of Science in Nursing program. Typical Schedule: At least 1-weekday, weeknight, or weekend (multiple schedule options may be available) for an 8-week session at a clinical partner site. Chamberlain students experience practice settings that include large and small hospitals, long-term care facilities, community and public-health agencies, faith-based service organizations, independent practices, ambulatory care centers, public health agencies, military services (Army, Navy, and Air Force), VA Medical Centers, schools, home health environments…anywhere healthcare is delivered. Pediatric Nursing You will be mentoring students, in a clinical setting, while they demonstrate nursing skills and procedures. Family-centered care of children is the focus of this course, exploring issues of normal child care as well as health alterations of children from infancy through adolescence. Students participate as members of the multidisciplinary health team to provide health promotion, illness prevention, health restoration and maintenance and rehabilitative care to children and families. Responsibilities: • Implements the College's philosophy, curriculum, program outcomes, and course objectives through clinical teaching, and service to the College, community, health system and profession., • Assumes responsibility for all autonomous aspects of individual teaching loads., • Plans clinical experiences for and provides direct supervision and evaluation of nursing students delivering nursing care to an individual or group of individuals., • Makes self-available to staff at the agencies., • Evaluates and provides documented feedback to student on level of performance based on course objectives., • Is available for remediation of students as required or needed., • Orients and maintains current knowledge related to agency/clinical policies, procedures, and expectations with the assistance of the agency/clinical personnel., • Develops and posts written clinical assignments consistent with student's knowledge base, skill competency and individual learning needs., • Corrects and returns homework, quizzes, tests, lab assignments, clinical paperwork and other written work in a timely manner., • Contributes to the ongoing development, implementation, and evaluation of the programs and the College., • May teach didactic course content under supervision of course coordinator., • Keeps course coordinator informed of all student and agency issues and concerns., • Works with college administration, staff and other faculty members to improve the overall operation of the college and student satisfaction rates., • Participates in the implementation of the College Assessment Program, campus retention efforts, and both departmental and campus policies., • Master's or doctoral degree in Nursing from a regionally accredited college or university., • An unencumbered professional nursing license in TX, • Teaching or precepting experience is preferred but not required., • Have genuine passion for nursing, education, and lifelong learning., • Have exceptional subject matter expertise with excellent written and verbal communication skills., • Are eager to serve students and colleagues with passion, respect, and care., • This position is seeking candidates with nighttime and weekend availability. Candidates must have overnight availability for consideration in this role. Additional Information Chamberlain Visiting Professor Position - Campus: In support of the pay transparency laws enacted across the country, the expected compensation rate for this position is between $1,120 per assignment to $7,245 per assignment, depending on the candidate’s education and experience. Actual pay may be adjusted based on job-related factors permitted by law, such as type of course taught; experience and training; geographic location; licensure and certifications; market factors; departmental budgets; and responsibility. Our Talent Acquisition Team will be happy to answer any questions you may have, and we look forward to learning more about your salary requirements. Equal Opportunity – Minority / Female / Disability / V / Gender Identity / Sexual Orientation

Job DescriptionDescription: JOB DESCRIPTION POSITION: REGISTERED CHARGE NURSE POSITION SHIFT: Overnight 10PM-6AM FLSA STATUS: NON-EXEMPT JOB SUMMARY: The Registered Charge Nurse is responsible for supervising nursing services and maintaining quality and adequacy of nursing practice. This role is responsible for demonstrating a commitment to customer service through resident focused initiatives that support the mission of the community. ESSENTIAL JOB FUNCTIONS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions: • Direct nursing services to all residents on assigned neighborhood or program., • Provides hands-on/ on-the-job training to newly hired team members. Provides skill set retraining as assigned., • Oversee physician orders, verify all orders received are transcribed accurately onto the electronic record system and treatment plan, administer medications, and provide treatments according to orders., • Supervise and provide leadership and discipline to clinical and non-clinical team members., • Participate with members of the interdisciplinary team to review, plan, coordinate and evaluate resident’s care. Document the resident’s condition and nursing needs accurately and in a timely manner. Reports pertinent observations and reactions regarding residents in a timely manner., • Develop, direct, and monitor nursing assistant assignments adjusting based on census and level of care required., • According to standard operating procedures, ensure correct staffing levels. Escalate team member performance issues to supervisor, participate in counseling and disciplinary action to the extent permitted by the State Nurse Practice Act., • Execute treatments as necessary while document status and observes reactions to medications and treatments., • Generate, prepare, administrate, and chart all medications., • Initiate physician orders, verify all orders received are transcribed accurately in electronic records and treatment plan, administer medications, and provide treatments according to orders., • Facilitate communication with families regarding change in medications and/or changes in the resident., • Establish protocol to ensure care plans are continually reviewed for updated and accurate data that represents the individuality of the resident., • Coordinate move-ins, move-outs, and transfers to deliver quality customer service., • Plan resident move-in as ordered by physician, perform assessment, verify orders with, • Introduce an accurate and thorough report to the on-coming shift to ensure the continuity of maximum resident care., • Direct team members in emergency situations and contact appropriate parties as needed., • Orchestrate investigation, corrects, and follows up on resident and family concerns as needed in a timely manner., • Comply with applicable federal, state, and local laws, rules, and regulations; maintains knowledge of and follows all company policies and procedures. Nursing diploma or associate degree in nursing from an accredited nursing program. A bachelor’s degree is preferred. One year of nursing experience in a long-term community is preferred. Supervisory/leadership in a long-term care community preferred. Certifications and Registered Nurse license and other licensure required by state regulations. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED: Ability to read, write and speak English sufficient to perform job duties and to interact and communicate with residents, vendors, and team members. Work efforts reflect a passion for exceeding customer expectations. Solicits resident/family feedback to understand the needs of the resident and the community. Advocates for service excellence within the center and influences others to take action. Displays responsibility by taking ownership of quality care. Shows dedication to enriching the lives of our residents through empathy and compassion. Exhibits a commitment to personal excellence through professional greetings, proper telephone etiquette, common courtesy, a professional attitude, and appearance. Exhibits a commitment to results by looking for and recommending or implementing process improvements. Shows respect and courtesy for fellow teammates by working together to get the job well done. Effectively addresses customer concerns and strives to reduce or resolve conflict. ENVIRONMENTAL AND PHYSICAL ACTIVITY REQUIREMENTS: The physical responsibilities of this position constantly require effective bending, reaching, standing, walking, lifting, carrying, grasping, talking, hearing, and repetitive motions. This position often involves medium work, exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Must be able to have visual acuity to determine the accuracy, neatness and thoroughness of work assigned or make observations of residents and environment; close visual acuity, such as preparing and analyzing data and figures, operating medical equipment, reading a computer screen, reading printed material, inspection of small defects, and using measurement devices. The functions of this position are conducted in a temperature-controlled environment and not substantially exposed to adverse environment conditions and may be routinely exposed to working hazards, communicable diseases, blood borne pathogens, cleaning chemicals, and odors. INTELLECTUAL/EMOTIONAL REQUIREMENTS: The occupant of this position must be able to perform the responsibilities of the position well under pressure. The position requires adaptability to performing a variety of duties, often changing from one task to another without loss of efficiency or composure. This position requires the ability to deal with and find resolution to problems and maintain a productive working relationship with team members and may be interrupted frequently to meet the needs and requests of others. It also requires adaptability to fluctuate between priorities daily while being responsive to needs as they arise. OSHA Category Classification: Category I: Tasks that involve exposure to blood, body fluids, or tissues. All procedures or other job-related tasks that involve an inherent potential for mucous membrane or skin contact with blood, body fluids, or tissues, or a potential for spills or splashes of them.

Job Description Floating Concierge | Full-Time, Multi-Property Coverage Stratton Amenities provides luxury front desk concierge services for upscale residential communities. We are seeking a reliable, polished, and adaptable Floating Concierge to support multiple properties within the market. This is a full-time role with 40 guaranteed hours per week. The Floating Concierge plays a key operational role by ensuring consistent coverage and service standards across the portfolio. Role Overview You will be assigned to different properties based on staffing needs, including call-offs, scheduled time off, new property launches, and coverage gaps. You are expected to step into any building and operate at full standard immediately. The properties may vary. The service standard does not. Core Responsibilities • Provide front desk coverage across multiple residential properties, • Manage building access, visitor announcements, and lobby presence, • Handle packages, deliveries, key control, and logging systems, • Answer phones and resolve resident requests professionally and efficiently, • Learn and follow each property’s procedures quickly and accurately, • Maintain a clean, organized, and professional front desk environment, • Minimum 2 years of experience in hospitality, concierge, or customer-facing roles, • Experience in luxury residential, hotel, or high-end environments preferred, • Reliable transportation and ability to travel between properties, • Strong communication skills and professional demeanor, • Ability to adapt quickly to new teams, environments, and expectations, • Full-time position with 40 guaranteed hours per week, • Flexible schedule required, including:, • Days, evenings, and overnight shifts, • Weekends and holidays Compensation and Benefits • Hourly pay based on experience This is not a passive front desk role. This position is for individuals who: • Show up prepared, • Adapt quickly, • Maintain standards without supervision, • Can be trusted to represent the company across multiple properties Stratton Amenities is an equal opportunity employer. We strongly believe diversity and inclusion are essential to making connections in a culture of service.

Job DescriptionDescription: Dog City is seeking dog lovers with a passion for providing top notch care, and a desire to grow with a company of like-minded individuals! Starting pay rate is $14 per hour with raises based on performance. Ideal candidate will be a kind, conscientious, and detail-oriented caregiver with a flexible schedule! We strive to provide a safe, fun, and rewarding work environment, with a focus on productive teamwork. Duties include: • Playgroup Supervision: Overseeing a playgroup of dogs and managing their behavior and playtime., • Canine Knowledge: You’ll learn animal behavior in order to provide a safe environment, including studying canine body language and learning how to make dogs comfortable in a kennel and playgroup environment., • Cleaning: Managing the cleanliness of our kennels and play areas and maintaining the highest possible cleaning standards. Cleaning toys, washing dishes, mopping floors, vacuuming hair, and taking care of unpleasant doggy messes are critical aspects of the job!, • Daily Care: Feeding pets according to parents’ instructions; making sure all dogs have fresh water, clean bedding, and a comfortable space to stay overnight. May also include administering medication according to veterinary instructions., • Problem Solving: Use common sense to solve problems as it relates to dogs in our care., • Be Proactive: Work with initiative to take on an array of tasks in our center., • Work Together: Communicating effectively with other team members—working at a doggie daycare is fun, but only if everyone is on the same page!, • Guest Service: Must have basic customer service skills and be ready to talk with pet parents about their family members!, • Safety First: Able to follow established safety protocols to the letter to ensure a safe and fun environment for our guests—and ourselves! If you’re the right candidate, we’d love for you to join our team! Benefits for all team members at Dog City include discounted daycare and boarding for your own dog, with additional benefits available for full time employees like medical/vision/dental plans and 401k! Pay starts at $14.00/hr. Requirements: The perfect candidate will embody these qualities: • Team Player: Works together well with others to make sure all duties are completed and our guests are cared for, • Good Communicator: Able to properly, promptly, and effectively communicate with other team members, management, and pet parents, • Flexibility: A flexible schedule. Willingness to work evenings, weekends, and holidays as needed., • Attention to Detail: Uses keen observation skills to make sure guests are safe and comfortable, and to report any issues as they arise, • Animal Experience: Previous petcare/animal experience preferred, but not required. Love for animals a must!, • Dog Friendly: Comfortable with dogs of all sizes and breeds—we see it all!, • Physical Stamina: An ability to stand/work upright for multiple hours at a time, in all weather types; able to lift at least 50 lbs and remain active throughout your shift. This is a physically demanding job!