Trabajos produce manager en Westfield, New JerseyCrear alertas

Job Description ABOUT ORGANOX: OrganOx is a commercial stage organ technology company dedicated to developing technologies to improve outcomes for patients with acute or chronic organ failure. The company was established as a spin out of the University of Oxford in 2008 and is now part of the Terumo Group. OrganOx is a pioneer in normothermic machine perfusion (NMP). It's flagship platform, the metra®, is available for use in the U.S., Europe, Canada, and Australia. It has been utilized in over 7,000 liver transplants to date to keep donor livers in a metabolically active state outside the body enabling longer preservation times and functional assessment of the organ prior to transplant, leading to an increased number of organs available for transplant. Founded in 1921, Terumo Corporation (TSE:4543) strives to fulfill its mission of “Contributing to Society through Healthcare” by providing a comprehensive range of solutions in the fields of therapeutic procedures, hospital operations, and life sciences in more than 160 countries and regions. Position Summary The position of Operations Manager is responsible for coordinating the activity of US Operations to satisfy customer requirements and OrganOx Inc. operational needs. Listed below are the key responsibilities of the role and a brief description of some of the key tasks to be performed. This list is not totally inclusive and the job holder will be expected to complete tasks reasonably requested by the Senior Manager, Operations. · This is a flexible, on-site role in our Madison, NJ office. · Major Responsibilities · Under direction from the Senior Manager, Operations, the Operations Manager will be responsible for: · Manage the distribution and storage of OrganOx sub-components, spares, tooling and finished goods using approved distribution and warehousing partners. · Identify and implement continuous improvement opportunities throughout the supply chain to improve Quality/Delivery/Customer Service/Cost. · Manage daily operations and logistics in the US to meet business objectives. · Support the Senior Manager, Operations in developing, implementing and monitoring KPIs to drive operational performance, cost efficiency and quality standards. · Develop, implement, and maintain policies and processes to maintain inventory accuracy, adequate safety stock, and inventory records compliance. · Provide regular structured communication to Senior Manager, Operations on operational performance in the US Region. · Manage and monitor the performance of logistics partners using Business Continuity Planning, identify and mitigate risks and issues in the supply chain. · Using formal mapping techniques, define the existing distribution network and identify updates to the network based on the business growth plan defined in the S&OP process. · Cultivating a high-performance culture. Promote cross-functional collaboration and create opportunities for professional development within the team. · This role may require travel up to 10% travel. Requirements Skills & Experience · Excellent communication and interpersonal skills both verbal and written, with a proven track record of business negotiation and report writing. · Ability to manage others to help them excel in their roles, realize their potential, and develop their careers. · Ability to operate in a rapidly changing environment, able to differentiate and prioritize between multiple competing objectives without losing sight of the long-term strategic aims of the company. · Ability to adopt a flexible approach on a day-to-day basis and willingness to perform tasks outside of core job description. · Demonstrable ability to identify and solve problems and justify implementation of improvements through cost-benefit analysis to business performance and cost-basis. · Proven track record of logistics, operations and supply chain management roles. · Detailed understanding of ERP. · Ability to produce Technical Reports to a high standard in terms of technical content, presentation and written English. · High competence in data manipulation in spreadsheet software with the ability to generate and convert data within flat and pivot datasets. · Ability to work effectively with suppliers. · Ability to work across a wide range of projects simultaneously. · Adhere to the letter and spirit of OrganOx’s Code of Conduct and all other company policies. Qualifications · Must have a minimum of a Bachelor’s degree in related field · A minimum of 7 years’ experience in inventory, supply chain or logistics · Good working knowledge of Enterprise Resource Planning (ERP) systems required. · 2+ years of managing direct reports strongly preferred. · Experience in the medical device industry preferred. · Ability to travel up to 10% of the time domestically and globally. · Flexibility to work after hours, as needed. · Good working knowledge of standard office and project management software. A job description does not imply that the duties stated are the only ones to be performed by the job holder. Job holder will be required to follow any other job-related instruction as reasonably requested by their line manager or their designate. Benefits We offer competitive compensation and comprehensive benefits available from day one, including health, dental, vision, disability coverage, and flexible spending accounts. Additionally, we offer a 401(k)-retirement plan with company matching after 90 days, paid time off, holidays, and additional leave benefits, as well as employee discounts and access to our onsite wellness facility. OrganOx supports work-life balance and provides opportunities for ongoing professional development.

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST., • FAST PACED ENVIRONMENT. Summary Established, ISO-certified contract manufacturer seeking full-time, dedicated CNC MACHINIST for an ultra-high tech, All Haas CNC Mill department. Primarily working in the Aerospace and Medical device industries. Employees receive top pay and benefits, including medical, prescription, dental, vision, 401K with match, etc. Our modern, air-conditioned facility is located in Mountainside, N.J. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Must be able to work independently. Requirements • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Working within the ISO 9001 quality standard required. Skills, Knowledge, Abilities • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. ------------------------------------------------------------ 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. ------------------------------------------------------------------------------------------ \nCompany Description New Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: www.njpt.com New Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: www.njpt.com

Job Description Cook ROLE PURPOSE To prepare a wide variety of foods according to recipe requirements and to adhere to product sensitivities and plate presentation. To ensure that all prepared food meets TGI Fridays food safety and quality standards. KEY RESPONSIBILITIES & ACCOUNTABILITIES Ensures that all prepared food meets TGI Fridays standard of excellence, 100% recipe adherence, and adheres to product sensitivity and plate presentation guidelines. Complies with all food safety rules, laws, protocols, and standards. Places expo-ready food in the window using the appropriate zoning standards. Keeps updated on recipe changes. Ensures proper execution of recipe procedures to maintain a high quality and consistent product. Keeps entire kitchen clean; stocks and sets up rotation. Keeps prepared food continuously moving out of the kitchen. Communicates ticket times and potential problems with the service staff, kitchen staff and Managers. Completes assigned prep work for stocking and set up of station. Breaks down and cleans station thoroughly daily. Assists with Line Checks and ensures every product on assigned station is within sensitivity guidelines and adheres to food safety standards. Requisitions products on a timely basis. Operates and maintains equipment properly. Cleans and sanitizes throughout the shift. Ensures proper rotation of all products and stocks products to par. Labels, day dots and signs all products as appropriate. Keeps immediate supervisor promptly and fully informed of all problems or unusual matters of significance and takes prompt corrective action where necessary or suggests alternative courses of action which may be taken. KEY DECISIONS Influences: Guest Experience Following and enforcement of standards of cleanliness and presentation Management of inventory MEASURES OF SUCCESS Consistently fulfill the Key Responsibilities and Accountabilities above Guest satisfaction scores Food quality and cost Cleanliness and sanitation QUALIFICATION REQUIREMENTS Must be able to perform multiple tasks, while maintaining standards in a high volume, fast-paced environment Must produce items exactly according to recipe to ensure Guest satisfaction and control food costs in a high volume, fast-paced environment Must follow food handling and sanitation procedures to control food costs and ensure overall safety Must be able to read Guest orders Must be able to hear kitchen, window person and/or Manager requests in the midst of loud background noise Must be able to stand, move and walk for entire shift Must be able to bend and stoop frequently Must be able to lift and carry sacks and cases of up to 70 lbs., up to 20 times per shift: places these items on high shelves and in walk-in freezers Must be able to work frequently in a hot and damp environment Must be able to occasionally work in extreme cold temperatures in walk in freezer Must be able to use hands 99% of the time COMPETENCIES PASSION FOR THE GUEST – Actively contributes to fun, friendly and engaging service. • Understands how their role impacts the Guest., • Displays a caring attitude towards Guests., • Contributes to the Guest experience through knowledge of job and products., • Demonstrates a service attitude by providing support to those who are directly serving the Guest., • Handles special requests in a responsive and positive way., • Utilizes customer feedback to provide a better Guest experience. COMMUNICATION – Keeps the lines of communication positive, open and productive. • Pays close attention to Guests' and coworkers’ special requests to ensure accuracy., • Responds positively to conflict situations and works to find appropriate solutions., • Keeps interaction positive and productive; avoids conveying negative messages., • Shares information with others to raise awareness of potential needs and concerns., • Listens carefully and attentively to others without interrupting., • Asks thoughtful questions to ensure proper understanding of the message being conveyed., • Contributes to pre-shift meetings by providing relevant updates and asking appropriate questions. PASSION & INITIATIVE – Keeps it fun and keeps up with the pace. • Shows Guests and Team Members that (s)he genuinely enjoys the job., • Displays passion, energy and pride in doing the job right., • Works with a strong sense of urgency and drive; pushes for quick, yet accurate results., • Focuses on the way (s)he approaches a task, not just the task itself., • Takes independent action to improve existing systems and processes., • Enthusiastically promotes the TGI Fridays brand and menu items. RELIABILITY & ACCOUNTABILITY – Works hard and delivers quality results. • Arrives on time and ready to work dressed in proper dress code., • Attends all required shift meetings and is prepared to contribute., • Minimizes wastes and costs (e.g., maintains proper rotation of inventory)., • Responds to food quality complaints by owning the situation and solving the problem quickly and properly., • Uses good judgment and acts with integrity in all dealings; demonstrates consistency in words and actions. FLEXIBILITY & STRESS TOLERANCE – Knows that anything can and will happen and handles uncertainty in a calm, controlled manner. • Addresses daily challenges and obstacles with confidence and a positive attitude., • Easily adjusts to meet changing demands and new responsibilities., • Prioritizes effectively and multitasks to ensure all tasks are completed by the end of the shift., • Maintains an even-tempered demeanor even in stressful situations., • Responds calmly to problems and controls emotional reactions., • Handles him/herself in a professional manner at all times. TEAMWORK & COLLABORATION – Fuels an environment where everyone pitches in and gets along. • Recognizes the importance of working together to accomplish goals., • Actively promotes cooperation, respect, and acceptance of all Team Members., • Establishes positive working relationships with all Team Members to maintain a productive environment., • Takes on additional responsibilities to ensure proper coverage during rush periods., • Reaches out to Team Members when necessary to ensure timely completion of all tasks., • Takes advantage of opportunities to set an example for new or inexperienced Team Members.

Job DescriptionDescription: Who We Are: Celerant Technology Corp is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Iselin, New Jersey and, as well as additional offices in Georgia, California and Texas. For more information, visit us at www.celerant.com. The Sales Operations Manager is the primary support professional to a team of sales people whose primary responsibility is to qualify and sell solutions. The Sales Operations Manager is a member of the sales team. This position involves a combination of analytical, operational, and strategic responsibilities to drive the overall success of the sales organization. This role calls for an individual with initiative, ability to prioritize and execute in a fast-paced environment, and the ability to manage multiple, complex tasks. An effective Sales Operations Manager will manage and enhance the sales processes, is tech savvy, has excellent written and verbal communication skills, along with distinctive organizational, collaboration, client service skills and provide strategic support. Responsibilities • Work collaboratively with the Sales Manager and Marketing Director., • Track and analyze key metrics including pipeline growth, win/loss rates, and goal achievement., • Maintain the accuracy of sales forecast and sales data., • Collaborate with the other departments such as Marketing, Finance and Operations to ensure alignment with overall business objectives, • Enhance sales productivity by enabling the team to work smarter by simplifying process and evaluating new tools, • Produce and review actionable and accurate sales reporting for reps, managers sales leaders, and executive team, • Build and help to standardize business reporting for strategic analysis and internal business review., • Assist in sales compensation management reporting, • Create internal and external documents to support the sales process (training documentation, meeting notes, marketing and sales collateral, strategic account plans, proposals that address client needs and goals)., • Help coordinate internal training on a regular basis., • Maintain and supervise mentoring program for newly hired sales or junior account representatives, • Attend and participate in sales meetings, occasional trade shows and product sessions Qualifications: • Bachelor's degree in business, marketing, or a related field., • Proven experience in sales operations or a related role., • Strong analytical and problem-solving skills., • Excellent communication and interpersonal skills., • Familiarity with CRM systems and sales technologies., • Ability to work collaboratively in a cross-functional environment., • Detail-oriented with a focus on continuous improvement., • Willingness to travel (about 10%), • Eagerness to learn and grow with a stable, successful company The Sales Operations Manager is essential in driving the success of the sales team, collaboratively with the Sales Manager, through strategic planning and reporting, ongoing education for the sales staff, process optimization, and effective use of technology. This role requires a combination of analytical skills, business acumen, and the ability to collaborate across various functions within the organization. Compensation: Competitive Salary with major growth potential, medical benefits, 401K, flexible spending account, 15 PTO days annually, optional dental/optical coverage. Salary range is $80,000 - $120,000 depending on experience. Requirements: Qualifications: • Bachelor's degree in business, marketing, or a related field., • Proven experience in sales operations or a related role., • Strong analytical and problem-solving skills., • Excellent communication and interpersonal skills., • Familiarity with CRM systems and sales technologies., • Ability to work collaboratively in a cross-functional environment., • Detail-oriented with a focus on continuous improvement., • Willingness to travel (about 10%), • Eagerness to learn and grow with a stable, successful company The Sales Operations Manager is essential in driving the success of the sales team, collaboratively with the Sales Manager, through strategic planning and reporting, ongoing education for the sales staff, process optimization, and effective use of technology. This role requires a combination of analytical skills, business acumen, and the ability to collaborate across various functions within the organization.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Opportunity for advancement, • Training & development Most liaison roles hand you a territory and tell you to go build relationships. This one hands you 12–15 qualified inbound leads a month, pays you on every hour your clients receive for as long as they stay on service, and staffs 100% of the referrals you accept — first shift within 48 hours. WHY THIS IS DIFFERENT You get leads, not just a map. Our paid search and SEO produce 12–15 qualified inquiries a month, handed to you. Current close rate is 25%. Beating it is worth money to you. Your commission doesn't expire. Uncapped, paid per hour served, for the lifetime of the client — not a one-time fee, not 90 days and done. A client you close in March is still paying you in year three. Higher rate for clients you source yourself, lower for company leads. We staff what you sell. 100% fill rate, 48 hours to first shift. You know what it costs to sell a discharge planner on a Friday case and have your agency fail to cover it. Press us on this number in the interview. You report to the owner directly. No regional manager, no approval chain — decisions on cases and rates happen same-day. WHAT YOU'LL DO Own the referral network — hospital and SNF discharge planners, case managers, elder law attorneys, senior living directors, physician practices. These become your relationships, and retention is yours too. Convert the inbound. Every lead routes to you with a 15-minute response standard. You run the in-home consultation and close private-pay and LTC insurance business yourself. Build the payer side. Secure UnitedHealthcare and Horizon BCBSNJ MLTSS approvals. Deepen relationships with MLTSS care managers at Aetna and Fidelis, where we're already contracted. Pursue Medicare Advantage supplemental benefit contracts under SSBCI and VBID. WHAT YOU BRING • 2+ years selling home care, hospice, home health, or SNF admissions in New Jersey, • Referral sources you can name by organisation and role — people who take your call today, • A track record in numbers: clients closed, hours added, close rate, • Experience being paid on commission, and fluency in how your own plan works, • Ability to close an in-home consultation with an adult child deciding under pressure, • Valid driver's license and reliable transportation MEASURED ON: new clients per month, net new hours per week, inbound close rate against the 25% baseline, response time, 90-day retention, MCO contracts secured. COMPENSATION • Separate bounty and quarterly milestones for Medicaid/MLTSS development, • IRS-rate mileage, company phone and laptop, marketing collateral, • Monthly business development budget; sponsorships approved separately, • 10 days PTO plus NJ Earned Sick Leave (1 hour per 30 worked, capped at 40/year) TERRITORY Private pay and LTC: Chatham, Livingston, Scotch Plains, Short Hills, Springfield, Summit, Warren, Westfield — across Union, Essex, Morris, and Somerset counties. Eight towns, tightly clustered. Four referral sources in a morning without spending it on the Parkway. Medicaid/MLTSS: statewide, concentrated in Middlesex, Essex, and Union. HOW TO APPLY Send a resume and short answers to these three questions. Strong answers get you heard, back the same week, and you'll speak with the owner, not a screener. 1. Name the three referral sources that send you the most business today — organisation and role., 2. How many new clients did you close in the last 90 days, and roughly how many hours per week did they represent?, 3. What total compensation are you targeting? Home Helpers Home Care of Summit is an equal opportunity employer. Flexible work from home options available.

Job Description Responsibilities Join Our Team: $10,000 Sign-On Bonus or Student Loan Payment Plan! MODALITY TEAM LEAD Job Summary: In addition to performing regular duties as a technologist within the imaging center, this position leads and promotes the operations of the department where team members work as a team to provide quality patient care and strive for excellence. Duties & Responsibilities: • Provides the Imaging Center Manager, ICM, with feedback regarding hiring qualified technologists., • Maintains a minimum level of team member turnover., • Sets clear and specific expectations/objectives for team members and the department., • Monitors and documents performance during performance periods and provides documentation to the ICM., • Provides the ICM input on performance., • Recognizes and provides coaching, counseling, and discipline as appropriate., • Keeps all team members informed regarding internal issues and external developments., • Provides team members with support and motivation., • Exhibits objectivity and openness to other’s views; demonstrates ability to balance team and individual responsibilities., • Promotes flexibility in staff utilization across teams and departments., • Delegates work appropriately and follows through to ensure optimal results., • Provides team members development opportunities as appropriate., • Adheres to all OSHA regulations, RadNet practices and generally accepted safety protocols., • Displays willingness and ability to make tough decisions., • Demonstrates sound judgment., • Integrates changes smoothly., • Responds professionally under pressure., • Performs technologist duties to maintain technical skills and to alleviate staffing shortages., • Supports the ICM in facility initiatives., • Acts on behalf of the ICM when he/she is unavailable., • Promotes and supports the company’s Vision/Mission/Values., • Other duties as assigned. Requirements (Knowledge, Skills, & Abilities): • Familiarity with and ability to use equipment in assigned modality including RIS, imaging equipment and PACS., • Ability to utilize the principles, theories, practices, techniques and methods of the imaging procedures the team member conducts in order to produce images of high diagnostic quality., • Understands anatomy and pathology as needed to perform imaging procedures in assigned modalities., • Ability to communicate effectively through verbal and written communication., • Ability to exercise a high degree of initiative, judgment, discretion and decision-making to achieve department and organizational objectives., • Ability to share information effectively and provide appropriate direction to team members., • Ability to delegate responsibility and authority to team members., • Knowledge of state and federal health and safety regulations., • General computer skills and Microsoft Office knowledge. Education & Experience Requirements: The above knowledge, skills and abilities may be demonstrated by successful completion of an accredited radiology program or 2-year degree; registered with the ARRT and state licensure (if applicable). Advanced level certification in the modality that the team member specializes (if available) plus prior experience in managing team members or a degree in management. • Must have current ARRT(CT) and State License in Diagnostic Radiologic Technology., • BLS Certification required., • Must have training and certification in venipuncture for the injection of contrast media via butterfly needle and IV catheter., • Requires a high school diploma or GED., • Maintain license and continuing education in accordance with state, federal, and regulatory agencies’ rules and regulations., • Ability to relate to the public in a professional and courteous manner, understanding the objectives of the organization, regardless of racial, ethnic, religion, sexual orientation, gender, mental/physical health, age, economic status, etc., • Familiarity with and ability to use specialized equipment., • Ability to respond to emergency situations in a calm and appropriate fashion., • The above knowledge, skills and abilities may be demonstrated by successful completion of an accredited radiology program; state and federal licenses (as applicable); and appropriate registrations and/or certifications., • Possesses and utilizes excellent customer service skills, strong written and verbal communications skills, and other medical related skills/knowledge., • Must be detail-oriented, highly organized, and able to interact effectively with doctors, patients, vendors, peers, staff and management. Pay Range: $42.00 - $55.00 per hour #MRNJ

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • Not required. Minimum Previous Experience: • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC., • Read measuring tape, gauges, and calipers, • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job Description OrganOx is a commercial stage organ technology company dedicated to developing technologies to improve outcomes for patients with acute or chronic organ failure. The company was established as a spin out of the University of Oxford in 2008 and is now part of the Terumo Group. OrganOx is a pioneer in normothermic machine perfusion (NMP). It's flagship platform, the metra®, is available for use in the U.S., Europe, Canada, and Australia. It has been utilized in over 7,000 liver transplants to date to keep donor livers in a metabolically active state outside the body enabling longer preservation times and functional assessment of the organ prior to transplant, leading to an increased number of organs available for transplant. Founded in 1921, Terumo Corporation (TSE:4543) strives to fulfill its mission of “Contributing to Society through Healthcare” by providing a comprehensive range of solutions in the fields of therapeutic procedures, hospital operations, and life sciences in more than 160 countries and regions. Position Summary OrganOx is in the process of expanding its engineering capability and is seeking an enthusiastic Product Engineer to join the Product Engineering team. As part of a small multi-disciplinary Product Engineering team, the successful candidate will have responsibility for activities focused on the existing product range in the following areas; · Support the implementation and verification of design changes on the existing product range, to introduce new features and functionality and drive continuous improvement. · Work closely with the operations team in resolving component obsolescence, manufacturing issues, or complaints on the existing OrganOx product.This will require close partnership with field-based Customer service, Operations, and Quality teams. · Supporting the creation of assembly and test instructions required by the Operations team and suppliers, to ensure the transfer of designs to production are delivered in accordance with design change and operational SOPs. · Working closely with Product Development and Innovations teams throughout development projects with a focus on supporting design reviews and design transfer activities. The ideal candidate will have a background in relevant science or engineering discipline. The successful candidate will work within a small, multi-disciplinary team of engineers, including electronics, mechanical and software development. The post holder will support activities relating to design changes and develop test strategies to ensure all changes are effectively implemented. The candidate requires excellent written and verbal communication skills to document their activities in line with the ISO13485 Quality Management System, planning and reporting on their work to a standard suitable for review by regulatory authorities. Listed below are the key responsibilities of the role and a brief description of some of the key tasks to be performed. Major Responsibilities The Product Engineer will be responsible for: · Contributing to design changes to support product, production and quality improvements. This includes conducting problem-solving efforts and root cause analysis. · Investigating device performance issues, determining, and reporting the root cause (in collaboration with the quality, service and operations departments), and recommending corrective actions. · Interpreting and understanding the product’s intended use, clinical procedures, customer needs and design inputs. · Creating and/or refining engineering documentation, such as the Design History File and the Device Master Record. · Following, learning, and contributing to R&D procedures, such as failure analysis, design controls and risk management, per the Quality Management System. · Assisting prototyping efforts and bench testing. · Prepare reports and conclusions for presentation. · Ensuring compliance with design and development procedures and ensuring all associated documentation is complete in accordance with ISO 13485 and local procedures. Requirements Skills and Experience The Product Engineer will have: · Demonstrable experience within Product Engineering/Product Development, preferably within medical devices or another highly regulated industry. · Experience with electro-mechanical devices, with understanding of how to drive, interface with and troubleshoot devices. · Ability to design, implement and carry out experimental test plans for electro-mechanical, fluid components, sub-systems, and complete safety-critical systems. · Ability to produce technical reports to a high standard both in terms of technical content, presentation, and written English. · Enthusiasm, good communication skills and ability to work effectively in a multi-disciplinary team. · Ability to work effectively with outside suppliers and manufacturers. · Ability to work across and manage a range of projects or tasks simultaneously. Qualifications The Product Engineer will have: Essential: · Bachelors degree or equivalent qualification/experience in Computer Science, Software Engineering, Biomedical Engineering, or other relevant disciplines. · 5-7 years of experience of working in a similar role. A job description does not imply that the duties stated are the only ones to be performed by the job holder. Postholders will be required to follow any other job-related instruction as reasonably requested by their line manager or their designate. Benefits We offer competitive compensation and comprehensive benefits available from day one, including health, dental, vision, disability coverage, and flexible spending accounts. Additionally, we offer a 401(k)-retirement plan with company matching after 90 days, paid time off, holidays, and additional leave benefits, as well as employee discounts and access to our onsite wellness facility. OrganOx supports work-life balance and provides opportunities for ongoing professional development.

Job DescriptionDescription: The Director of Grants and Planning is central to the Partnership’s ability to secure and sustain the government and private funding behind its programs — leading competitive proposal development across a large and growing portfolio, and turning organizational strategy into coordinated, accountable action. Working closely with organizational leadership, program teams, and the finance department, this position guides the grant pipeline from opportunity to award and strengthens the processes that support grants administration. The Director also leads implementation of strategic initiatives, promotes a culture of shared accountability across departments, and drives organizational effectiveness through clear processes, coordinated planning, and strong internal partnerships. Essential Functions • Lead the organization's competitive grant pipeline: monitor private, state, and federal NOFOs and RFPs, maintain the funding calendar, and anticipate periods when multiple proposals will be due at once, • Facilitate decisions on grant proposal submissions and prepations with stakeholders including weighing mission fit, capacity, financial impact, and competitiveness, • Write private, state, and federal proposals during peak periods, sharing the writing load with the primary grant writer so that no proposal is understaffed, and serve as a senior voice on grants with internal stakeholders, external partners, and funders, • Project manage each grant proposal and renewal: lead the kickoff, assign sections and inputs to named contributors across departments, set internal deadlines, and track progress to submission, • Keep proposals on schedule through proactive project management: hold regular check-ins, anticipate bottlenecks, help contributors balance proposal tasks with their other responsibilities, and resolve obstacles early, escalating to senior leadership as needed, • Serve as the voice for competitiveness throughout proposal development, partnering with program leads and Finance to shape program designs, service targets, and budgets that respond fully to funder priorities, balancing program capacity and organizational financial goals with the need to produce competitive proposals, • Provide final quality review of proposals for alignment with funder criteria, internal consistency, and the organization's voice, • In partnership with the Chief Financial Officer, map current grants administration workflows from award through closeout, and identify delays, duplicated efforts, and unclear handoffs, • Design, document, and roll out standard processes for renewals, budget development timelines, contract and award setup, budget or program modifications, and contract closeouts, • Establish and maintain a single grant compliance calendar covering reporting, budget, and renewal deadlines across the portfolio, ensuring grant processes begin early enough to ensure adequate time for consideration and input from all stakeholders, • Provide input to Chief Financial Officer on the performance of grants administration staff within finance department, • Supervise the Manager of Strategy & Innovation, providing regular feedback, professional development, and day-to-day guidance, • Develop implementation plans for strategic initiatives led by the Chief Strategy and Innovation Officer, defining goals, sequencing of activities, roles and responsibilities, decision-making, milestones, and risks, • Coordinate execution of strategic initiatives across departments, keeping initiatives on track by supporting owners, anticipating challenges, and adjusting plans as needed, • Track progress across active strategic initiatives and lead regular reviews with the Chief Strategy and Innovation Officer on status, challenges, and decisions needed Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Requirements: • Bachelor's degree required, Master's degree preferred, • 7 or more years of grant writing experience required, including writing and leading successful governmental proposals, • 3 or more years of supervisory experience required, with a demonstrated ability to coach and develop staff, • Experience in maternal and child health, public health, or community-based human services required, specific experience with NJ Department of Health and NJ Department of Children and Families initiatives preferred, • Experience developing and planning long-term strategic initiatives required, • Excellent written and verbal communication skills, with the ability to craft compelling, funder-aligned narratives, and to communicate clearly with program staff, leadership, partners, and funders, • Prior experience managing projects, leading cross-departmental teams to deadline without direct authority, with a collaborative orientation focused on building shared ownership, balancing competing priorities, and keeping work on track required, • Proficiency with Microsoft Office Suite and federal or state grant submission systems (e.g., Grants.gov, NJ SAGE) required DEIB Drivers for Success PMCH aims to foster a workplace culture that prioritizes diversity, equity, inclusion, and belonging. Our collective vision is to create an antiracist organization through: • Encouraging bidirectional and transparent communication, • Promoting a culture of belonging, • Practicing cross-program collaboration and engagement, • Engaging in continuous learning/enrichment, • Embracing inclusive representation and practices Functional Requirements of the Role This role may involve a range of physical, sensory, and cognitive tasks. We are committed to providing reasonable accommodation to support individuals in performing essential functions. Immunization Policy All PMCH employees must comply with the guidelines of our Immunization Policy.

Job DescriptionJob Title: Quality InspectorJob Description The Quality Inspector ensures that products, processes, and services meet customer and regulatory requirements by performing detailed inspections, audits, and documentation throughout the manufacturing process. This role reviews customer purchase orders and specifications, verifies product conformance using precision measuring tools, and supports corrective and preventive actions to resolve quality issues. The Quality Inspector works closely with internal departments, vendors, and external auditors to maintain high standards of workmanship and compliance within an ISO-certified manufacturing environment. Responsibilities • Review customer purchase orders to confirm that all requirements are clearly understood and that the facility has the current specifications, capabilities, and approvals needed to meet those requirements., • Initiate and participate in corrective and preventive actions resulting from internal audit findings, customer complaints, and product or process issues., • Perform audits of internal products and processes, as well as vendor processes, and assist in preparation for and interaction with external quality auditors., • Collaborate directly with other departments and customers to ensure product conformance to specifications and expectations., • Ensure conformance of products, processes, and services to customer and regulatory requirements, and work with the Quality Manager to stop processes that produce nonconforming product., • Use various tools, gauges, and measuring equipment to verify coating thickness, coating location, and part dimensions, and confirm that all tools and measuring equipment are properly calibrated and functioning correctly., • Verify that all required operations have been completed and accurately recorded on the router., • Perform detailed visual inspections of products to identify unacceptable defects such as cracks, chips, delamination, scratches, dents, and other workmanship issues., • Document inspection results and ensure that required quality records within the scope of this function are properly identified, completed, and retained in accordance with company procedures., • Identify product defects on routers and appropriate MRB tags, ensure nonconforming parts are placed in designated MRB areas, and promptly inform relevant functions of detected issues., • Verify that products returning from outside processing conform to requirements and review vendor certifications for completeness and accuracy., • Confirm that product identification, including part numbers and serial numbers, matches customer paperwork and that quantities are correct., • Review certificates of conformance for completeness and accuracy prior to signing and releasing them., • Perform shipping and receiving-related quality checks as needed to ensure that incoming and outgoing products meet specified requirements., • Carry out other related duties as necessary to ensure ongoing product conformance and support overall quality objectives.Essential Skills, • Experience working in a manufacturing environment., • Proven quality control or quality inspection experience in a manufacturing or industrial setting., • Hands-on experience with visual inspections and identifying defects such as cracks, chips, delamination, scratches, dents, and similar issues., • Proficiency in using measuring tools and gauges, including micrometers, calipers, CMM equipment, rules, and protractors., • Ability to perform accurate measurements using various gauges and tools, including eddy current and magnetic induction equipment., • Familiarity with ISO 9001 quality management systems and related documentation and compliance requirements., • Experience with quality control processes in the manufacturing industry, including inspection, documentation, and quality checks., • Ability to review and verify certificates of conformance and vendor certifications for completeness and accuracy., • Mathematical skills with the ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals., • Ability to handle export-controlled technology and technical data in compliance with applicable U.S. laws and company export control procedures., • Near vision that meets minimum requirements of Snellen 14/18 or Jaeger 2 (20/30 minimum), either uncorrected or corrected, to perform detailed inspection tasks effectively., • Strong attention to detail and accuracy in documenting inspection results and maintaining quality records., • Ability to work collaboratively with cross-functional teams, vendors, and auditors to support quality objectives.Additional Skills & Qualifications, • Experience in an ISO-certified manufacturing environment., • Exposure to aerospace and commercial product lines or similarly regulated industries., • Experience with shipping and receiving processes from a quality perspective., • Familiarity with quality tools and methodologies related to corrective and preventive actions., • Comfort working with internal and external quality auditors., • Strong written documentation skills for recording inspection outcomes and quality records., • Ability to adapt to a dynamic environment where daily tasks and product focus may vary.Why Work Here? The company offers a stable and resilient workplace, having maintained operations and avoided layoffs during challenging market conditions while many competitors were shutting down. Employees benefit from a flexible and exciting work environment where each day brings new challenges and learning opportunities. The organization supports a steady and consistent workload across both aerospace and commercial business, providing variety and long-term security. Team members work in a close-knit setting that values collaboration, continuous improvement, and adherence to high quality standards. Work Environment The work environment is an ISO-certified manufacturing facility that follows strict quality and regulatory standards. The company operates within both commercial and aerospace sectors, offering a consistent workflow and exposure to a range of products and processes. Team members use a variety of precision tools and equipment, including gauges, micrometers, calipers, CMM systems, and eddy current or magnetic induction devices, to perform inspections and measurements. The setting is that of a small, friendly organization where everyone works closely together and supports one another to meet shared quality goals. Work involves detailed visual inspection and documentation, and requires adherence to export control procedures and applicable U.S. regulations. Job Type & Location This is a Contract to Hire position based out of Springfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Springfield, NJ. Application Deadline This position is anticipated to close on Nov 23, 2026. Workplace Type This is a fully onsite position in Springfield,NJ. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Canoe Brook Country Club Position Summary The Communications Manager is responsible for the development, execution, and management of all club communications, ensuring a consistent, polished, and engaging voice across all platforms. This role serves as the central hub for member and employee facing communication and storytelling, supporting the Club’s mission to deliver an exceptional and connected member and employee experience. Operating as a highly collaborative, independent contributor, the Communications Manager partners with all departments to promote club programming, enhance member engagement, and uphold Canoe Brook’s brand standards. Key Responsibilities Communications Strategy & Execution • Own and execute the Club’s comprehensive communications plan across email, digital, print, and on-property channels, • Develop and maintain a consistent voice, tone, and visual identity reflective of Canoe Brook’s brand, • Manage the editorial calendar to ensure timely, accurate, and strategic communications Content Creation & Member Engagement • Write, edit, and distribute quarterly newsletters, club updates, and event promotions, • Create compelling content that highlights club life, programming, and member experiences, • Partner with all Club departments to gather content and promote initiatives, • Support storytelling initiatives including photography, video, and feature content Digital Platforms & Systems • Maintain and update the Club website and mobile app, • Manage email marketing platforms and distribution lists, • Oversee social media channels with a focus on engagement and brand alignment Marketing & Club Support • Design and produce marketing collateral, including flyers, signage, and digital assets, • Support membership efforts through prospective member materials and onboarding communications, • Assist in promoting major club events, seasonal programming, and capital or strategic initiatives Brand Stewardship • Ensure consistency and quality across all communications and visual materials, • Serve as the internal resource for communication standards, formatting, and messaging Analytics & Continuous Improvement • Track engagement metrics (email open rates, event participation, digital interaction), • Refine communication strategies based on performance and member feedback Qualifications • Bachelor’s degree in Communications, Marketing, Graphic Design or related field, • 2+ years of experience in communications, marketing, hospitality, or a related field, • Exceptional writing, editing, and proofreading skills, • Experience with email marketing platforms and social media management, • Proficiency in design tools (e.g., Canva, Adobe Creative Suite, iMovie) preferred, • Strong organizational skills with the ability to manage multiple projects simultaneously Core Competencies • Self-Starter: Highly motivated and able to manage all aspects of communications independently, • Collaborative: Builds strong relationships across departments to gather content and drive initiatives, • Detail-Oriented: Maintains a high level of accuracy and polish in all communications, • Creative & Strategic: Balances day-to-day execution with thoughtful, engaging storytelling, • Member-Focused: Understands and enhances the member experience through effective communication Work Environment • Professional, fast-paced private club environment, • This position will be responsible for capturing photos/videography at Club events. Requires flexibility to support club communications tied to evenings, weekends, and key events.

Company Description Bestmark National is a premier design-build firm specializing in commercial, retail, and hospitality environments. The company values passionate leadership and delivers high-quality results tailored to each client's needs. With a state-of-the-art facility and a versatile team, Bestmark National ensures safe, well-executed, and timely project delivery across America. Role Description This is a full-time, on-site role based in Irvington, NJ Bestmark National is seeking an experienced CNC Operator who will be responsible for setting up and operating CNC machinery to produce accurate, high-quality components in accordance with shop drawings, work orders, and production specifications. The ideal candidate will have hands-on experience operating CNC machinery in an architectural millwork, woodworking, cabinetry, or custom fabrication environment. This role requires practical knowledge of woodworking materials and machining processes, attention to detail, and a strong commitment to production quality and workplace safety. Key Responsibilities • Prepare, set up, and operate CNC machines to perform machining operations such as drilling, grinding and milling,, • Load, position, and secure raw materials and components into the machine., • Review job orders, shop drawings, and production specifications to determine required machining operations., • Follow established CNC programs and machine instructions to produce components according to project requirements., • Conduct test runs and verify that produced components meet required measurements, specifications, and quality standards., • Perform periodic physical inspections of components throughout the production process to identify defects or inconsistencies., • Monitor machine operations and make routine adjustments as necessary to maintain accuracy, quality, and production efficiency., • Identify and report machine, tooling, or production issues to the Supervisor or Production Manager., • Perform routine daily, weekly, and monthly machine maintenance and inspections as required., • Operate and maintain a forklift for material handling, deliveries, and pickups, as needed., • Ensure proper material handling throughout all stages of production., • Inspect machines and work areas at the end of each shift to ensure they are properly maintained and left in safe condition., • Immediately report unsafe conditions, equipment concerns, and workplace incidents., • Perform other duties and responsibilities as directed by the Supervisor or Production Manager. Qualifications • Previous hands-on experience operating CNC machinery in architectural millwork, woodworking, cabinetry, or a related manufacturing environment., • Familiarity with HOMAG CNC machinery and equipment. (HOMAG N500 & HOMAG 5-Axis CNC Machines), • Ability to read and interpret shop drawings, job orders, measurements, and production specifications., • Knowledge of woodworking materials, machining processes, and fabrication procedures., • Experience with machine setup, material loading, component inspection, and basic troubleshooting., • Ability to identify quality issues and maintain accuracy throughout the production process., • Strong attention to detail and ability to follow production instructions., • Ability to work independently and collaboratively within a manufacturing team., • Commitment to workplace safety and proper equipment operation., • Ability to work overtime when needed.

Partner Development Manager Justin Alexander Group | B2B Sales Reports to: NA Sales Manager Department: B2B Sales Work Location: Hybrid - 4 days onsite: 1 day WFH Travel: ~50 days annually, including trunk show weekends Justin Alexander Group sells through independent boutiques - no direct to consumer, no company flagship boutiques. Each gown that Justin Alexander Group sells is sold by someone standing in a store with a bride, an owner, a manager, a stylist. The Partner Development Manager is the person who knows those people by name, understands what is working on their floor, and turns that relationship into sell-through. You are the connective tissue between JAG and our retailers. Part trusted advisor, part educator, part road warrior. You will build training and development programs that make our partners better at selling our brands, however, the programs are the tool, not the point. The point is depth of relationship and measurable performance in the stores you guide. This is a role for someone with real bridal or luxury retail in their bones. Industry depth is the single most important thing you bring. Who You Are Before scope, the person. We are less interested in someone who can administer a training calendar than in someone retailers trust and call first. • You know bridal. depth of industry is your greatest strength: you understand the economics of a boutique, the rhythm of a trunk show weekend, and what a stylist needs to close the sale., • You build relationships that last. With owners, with managers, and equally with stylists on the floor — they are three different audiences with three different motivations., • You are commercially minded, not administratively minded. You can look at an account and see where the revenue is being left on the table., • You are comfortable being the face of JAG in a room, on a webinar, and in a store on a Saturday., • You are practical with tools and platforms without being a technician. This role is not a systems job. The best version of this hire is a relationship operator with a training toolkit, not a trainer who happens to know retailers. Account Relationships & Revenue Contribution The heart of the role. You will develop and deepen relationships with our retail partners and be held to what those relationships produce. • Act as a direct point of contact and trusted advisor for retail partners, building genuine relationships with owners, managers, and stylists alike, • Visit stores during trunk show weekends and peak selling periods - in the room and on the floor, where the selling happens., • Develop and implement programs focused on in-store performance improvement and increased sell-through, • Partner with Leadership to define a list of key accounts that serve as reliable sources of feedback and early signal, • Maintain ongoing check-ins to monitor retailer health and surface risk or opportunity before it shows up in the order book Retailer Onboarding & Partner Health A new partner's first 90 days set the tone for the entire relationship. You own that experience. • Own the onboarding experience for new retail partners: welcome materials, initial training, platform access, and a structured introduction to tools, resources, and brand standards, • Define and develop an inventory of retailer gifting opportunities (ie: welcome kits, Diamond invitations, end-of-year gifting) partnering with Marketing on execution and the Senior Account Associate on delivery Education, Training & Development You will build the body of knowledge that makes our partners better at selling Justin Alexander Group brands, for both internal and external audiences. • Develop and produce training materials covering brand and product knowledge, special orders and customizations, delivery processes, stylist training, store merchandising, trunk show execution and optimization, and marketing basics including social and digital best practices, • Create and produce digital training seminars and quarterly webinars aligned to company objectives and brand strategy, • Lead the annual Stylist Summit in collaboration with Sales and Product/Merchandising, partnering with on-site team members on coordination, • Own all logistics for training courses and workshops like scheduling, materials, venue and platform management, • Build programs in response to retailer needs and internal requests across Sales, Marketing, Digital Product, Merch/Product, and Operations, • Deliver ongoing education to store partners in person and virtually across product expertise, merchandising best practice, and retail operations, • Enable Account Managers and Account Associates to deliver core training themselves: train-the-trainer sessions, facilitator guides, and ready-to-run decks and talk tracks so the material travels without you in the room, • Work with Marketing and Merchandising to ensure training content reflects current business priorities and product stories VIP Retailer Programs Account Managers and Sales Representatives are the primary touch point for their stores; you are the steward of the programs behind them - how the funds get used, and whether the team advising on them knows what good looks like. • Oversee use of VIP Retailer Programs incentive and allocation funds — ensuring spend is deployed against what actually drives sell-through, and escalating where it is not, • Train Account Managers and Sales Representatives on program mechanics and allocation best practices so they can advise their stores directly and with confidence, • Advise on allocation decisions including POS materials, stylist gifting, advertising formats, and spiffs — as the internal expert the Account team escalates to, • Step in directly with stores when a question, opportunity, or account warrants it, without displacing the Account Manager relationship, • Collaborate with Media and Advertising and other cross-functional partners for channel POVs, best practices, and recommendations, • Host program webinars for participating stores, surfacing what is working across the country so every partner benefits from the full national picture Partnerships & New Ventures As JAG extends into new categories and collaborations, you carry the story into the stores. • Partner with Sales and Marketing to lead new brand partnerships with an in-store component, serving as primary point of contact for questions and implementation, • Onboard and educate retail partners on new product categories and programs, in store and virtually, ensuring understanding of brand positioning, product offering, selling points, and operational requirements to support confident sell-in, sell-through, and long-term success, • Serve as the primary resource on new venture partnerships, leading training and presentations for prospective partners Communication & Cross-Functional Partnership You are the 1:1 voice to the retailer. Marketing Communications owns the broadcast. • Work with Digital Product and Marketing Communications to keep retail partners current on portal and tool changes — this role owns 1:1 communication and training, while the Marketing Comms lead manages broad channel communication, • Feed retailer insight back into Sales, Marketing, Merchandising, and Digital Product so the business hears the floor On the Road Approximately 50 travel days annually. Travel is not incidental to this role — it is where the relationship gets built. • Store visits, weighted toward trunk show weekends and key selling periods, • Key events, regional retailer retreats, and strategic meetings Experience We're Looking For • 3–5 years in bridal or luxury sales, training, and development, • Demonstrated ability to build and hold relationships with retail owners, managers, and stylists, • Comfort presenting and teaching to groups, live and virtual, • Program-building instinct — you can create something repeatable, not just execute a one-off We are also open to a more seasoned candidate with established wholesale account development, program creation, and multi-market training experience — someone who could contribute to revenue more meaningfully from day one. Compensation & Benefits $82,000–$85,000 for a candidate bringing strong bridal product knowledge and training ability who is stepping into their first corporate manager role. $90,000–$95,000 for a candidate with established wholesale account development, program creation, and multi-market training experience. Justin Alexander offers a comprehensive benefits package that includes: • Health, dental, and vision insurance with ancillary options, • 401(k) with company match, • Paid time off (vacation, sick days, holidays), • Family Building Benefits, • Tuition Reimbursement, • Employee discounts and more Why This Role Matters JAG sells exclusively through boutique partners. That makes retailer capability our growth ceiling — we cannot out-market or out-merchandise a floor that does not know how to sell our product. This role raises that ceiling. Done well, it moves us from sending materials to genuinely developing partners: stronger sell-through, deeper trust with the owners and stylists who represent us, and a feedback loop that makes every other function in the building smarter.

About Us Franco Manufacturing Co., Inc. has been a leading international producer of decorative home fashions for over 70 years. Our products include fun and whimsical licensed juvenile sheet sets, comforters, pillows, blankets, towels, and home accessories sold to major market retailers, specialty stores, discounters and online outlets. We have an exciting opportunity for an Assistant Product Manager based at our headquarters in Metuchen, NJ. Duties & Responsibilities In this highly visible position, you will partner with Sales, Design, and Global Sourcing to support assigned retail accounts and coordinate product development. Duties include: • Coordinate the planning, specs, and samples necessary to implement a new product program., • Ensure that Design provides the necessary artwork to produce orders on time., • Partner with Global Sourcing to ensure that samples are received., • Maintain schedules to track samples and delivery status., • Work directly with Sales personnel to address needs for retail account meetings., • Support the preparation and execution of Market Week plans, including sample coordination, printed materials, showroom setup, and mockup samples., • Support special projects such as planograms and account setups. Requirements • 2+ years’ product management experience in textiles, apparel, accessories or related products., • Previous experience working with overseas production, • Excellent organizational and communication skills., • Proficiency in Excel., • Experience with licensed products or home textiles a strong plus., • Ability to work in-office (Metuchen,NJ) 4 days/week Franco Manufacturing Co., Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law.

Zina's Fine Foods is a refrigerated food manufacturer in South Plainfield, New Jersey. We make ready-to-eat salads, side dishes and prepared meals for national and regional retailers, and we are growing faster than our plant was built for. We are hiring a Maintenance & Engineering Manager. You will report directly to the President and own the engineering function outright. There is no engineering layer above you and no corporate group to defer to. You decide what gets fixed, what gets bought, what gets automated and in what order. Your team You will lead a small in-house team covering controls, mechanical repair and facilities. You decide what each of them works on, week by week, and you are accountable for whether their time produced anything. You also direct our outside vendors for refrigeration, electrical and specialty service work. Running the plant • Own the PM program, the asset register and the spare parts you actually need on the shelf, • Be first to a breakdown, not third. You diagnose across mechanical, electrical, pneumatic and controls, and you still put your hands on the machine, • Find the recurring failures, fix the cause, and stop us paying for the same repair twice, • Set the machine parameters and changeover standards our operators follow, • Keep uptime honest with numbers you trust Equipment you will work with Cookers and chillers, mixers, fillers and depositors, labelers, checkweighers, metal detectors, conveyors, tray sealers and packaging lines, plus the compressed air, glycol, steam and refrigeration behind them. Not all of it came with documentation, and part of the job is making that equipment as reliable as the rest. Capital projects and automation • Tell us what to buy and what not to buy. We would rather hear "not yet" with a reason than spend the money twice, • Assess what we already own and say honestly what should be rebuilt, replaced or run to failure, • Find the suppliers, write the specification, get the quotes, compare them on real numbers and pick, • Decide where machinery goes so the workflow, the sanitation and the people all work, • Size what the line needs: power, air, water, drains, refrigeration load, • Run factory acceptance testing and site acceptance testing yourself, and refuse to sign off on equipment that does not perform, • Build the automation roadmap: what we automate first, what it costs, what it returns, • Tell us when the answer is another person rather than another machine Engineering judgment and the limits of it You will do the calculations behind our decisions. Where the work needs a licensed Professional Engineer's seal, permit drawings, structural capacity, service upgrades, you scope it, hire the firm and manage them. We expect you to know exactly where that line falls. Compliance Lockout/tagout, machine guarding, electrical safety and contractor control are yours. Our equipment and our maintenance practices have to hold up to GMP, HACCP and SQF, and to customer audits with little notice. What you need • Five or more years in maintenance or plant engineering in a food manufacturing plant, working under FDA or USDA rules. Food plant experience is required., • Three or more years as a maintenance or engineering manager in a food plant, owning the PM program and the maintenance budget and deciding who does what, • Hands-on ability to diagnose and repair across mechanical, electrical, pneumatic and control systems, • Read and produce electrical schematics and process drawings, and size pumps, fans, motors, compressed air and refrigeration loads, • Experience selecting and commissioning production equipment: specification, quotes, vendor selection, acceptance testing, • Willing to be on the floor daily, in refrigerated and wet areas, and reachable when a line goes down, • Valid driver's license No degree is required. If you came up through the trades and have run a plant's engineering, we want to talk to you. Pay and benefits • $140,000 to $170,000 per year, depending on experience, • 401(k) with company match., • New Jersey earned sick leave, • 10 days of paid time off, • Free salads from our own production, and ingredients at wholesale

Job information: • · Functional title - UEBA Use Case Developer/Manager UEBA, • Department – IT Security, • Corporate level – Vice President, • Report to – Director of Insider Threat, • Location - Iselin, New Jersey, • Compensation – $143,000 - 166,000 base salary + variable compensation + 401(k) match + benefits Overview of the role: CLS is seeking a highly motivated, and skilled Vice President - UEBA (User Entity Behavioral Analysis) Use Case Developer/Manager to join our Insider Threat Team. The role will be located in New Jersey. The position will report to the Director of Insider Threat and will participate in the development, implementation, and continuous improvement of a new Insider Threat team. This role involves the identification, detection and investigation of abnormal actions from internal accounts which may be indicative of risk posed by individuals with authorized access to organizational assets, including employees and third-party vendors. The position will require collaboration with cross-functional teams to mitigate the risks of malicious, negligent, or unintentional insider actions that could lead to security breaches, data loss, or system unavailability. This position requires someone with an analytical mind and data analysis skills, working knowledge of company systems and IT security tools, a quick learner, and the ability to propose and execute on program improvements. This role will also be responsible for building relationships with organizational partners and conducting investigations. What you will be doing: • Integrate UEBA capabilities with SIEM, SOAR, EDR DLP, and IAM systems., • Establish baselines of normal user behavior across identity, network, endpoint and application activity., • Monitor user risk scores and tune detection logic to reduce false positives and improve detection fidelity, identifying and onboarding new telemetry sources., • Drive incident response and insider threat investigations with timeline and data analysis. Conduct proactive behavioral threat hunting using UEBA data., • Manage playbook response actions and support investigations of suspected insider threat incidents to include preventative controls and user quarantine actions., • Align behavioral monitoring with privacy, legal and HR considerations., • Participate in the execution of the insider threat program, including the development of tools, standards, procedures, and processes to detect, prevent, and respond to insider threats., • Research advanced detection and monitoring tools to complement existing systems., • Drive continuous improvement by integrating lessons learned, industry best practices, and emerging threat intelligence., • Collaborate with stakeholders across the firm to evaluate and address potential insider risks across systems, networks, and organizational processes., • Participate in investigations and produce reports on insider threat risks, incidents, and mitigation efforts for executives to aid in their decision making., • Work with the intelligence team to develop threat modelling deliverables, · What we’re looking for: Experience • 8+ years of experience in information security such as Insider Threat, Investigations, Analysis, Security Operations, Incident Response, or Threat Intelligence roles., • Experience with insider threat detection tools (UEBA, SIEM, EDR, DLP) and knowledge of advanced threat intelligence techniques., • 3+ years of experience in Insider Threat or equivalent., • Knowledge of fundamentals of threat actors’ TTPs and MITRE ATT&CK Framework., • Understanding of security frameworks, incident response, and risk management practice., • Knowledge of relevant legal and regulatory considerations, including privacy laws and data protection requirements., • Excellent interpersonal and relationship management skills. Professional qualifications / certifications • Bachelor’s Degree in Cybersecurity studies, Information Systems, Computer Science, Business Analytics, Intelligence Studies, Criminology, or related discipline., • Experience or the ability to operate & tune security monitoring and analytical tools (e.g. UEBA, SIEM, EDR, DLP) is highly preferred., • Expertise in managing initial incident response and supporting investigations, coordinating with multiple departments, and resolving security incidents efficiently., • Security certification through a credentialing organization which demonstrates knowledge of cybersecurity, defense, vulnerabilities, data and operating system security e.g. SANS, ISC2, ISACA., • Experience with threat intelligence and SOC/CIRT interaction., • Experience in handling sensitive information., • Strong written and verbal communication skills as well as interview skills., • Ability to work on-site at least twice a week in New Jersey and/or participate in local intelligence sharing groups., • Financial sector experience.

Job Description Maintenance Technician (Full-time 40 hours per week) Northeast Capital Group Iselin, NJ Full-time Full job description POSITION SUMMARY The Maintenance Technician is responsible for assisting with the overall facilities maintenance under the direction of the Property Manager. ESSENTIAL FUNCTIONS The position requires performance in a wide range of areas to the buildings, grounds, and equipment. It requires a working knowledge of the plumbing, electrical, carpentry, HVAC, appliance repair, grounds maintenance, painting, flooring, etc. These functions are not limited to the following areas: • Completion of work orders in a timely basis., • Routine inspections of all common areas, amenities, systems closets, maintenance shop and grounds, and keeping all areas clean and sanitary., • Assist with inclement weather tasks to ensure clear walkways and entrances., • Ordering supplies and tracking inventory., • Escorting / providing access to third party vendors for service calls and inspections, • Coordinating with Property Manager for any building inspections and follow-up with work orders to repair all deficiencies found., • Upon notification from the Property Manager, be available for emergency duty, such as in case of a fire or any other emergencies as defined by Management., • Completing any incident reports within 24 hours of occurrence (i.e. injuries, property damage, disturbances, etc.), • Accepting maintenance requests only from Property Manager., • Preventative Maintenance and Inspections of fire equipment and roofs QUALIFICATIONS: SKILLS & ABILITIES • 3 years’ experience in all facets of property maintenance, • High School graduate or equivalent, • Knowledge in plumbing, HVAC, electrical, carpentry, appliance repair, maintenance, grounds maintenance, roofing, flooring, etc. or the ability to learn this skill, • Ability to communicate both orally and in writing with a wide range of people, • Ability to accept responsibility and account for his/her action, • Trait of being dependable and trustworthy, • Ability to utilize available time to organize and complete work within given deadlines, • Ability to work at a sustained pace and produce quality work, • Required to assist on an on‐call rotation schedule, • Use of the proper safety equipment; gloves, goggles, back belts and proper footwear required, • Must have a valid driver’s license and vehicle to travel to neighboring properties, if needed., • Able to operate computers and navigate property management software. Physical Requirements · Must be ab le to read reports, maintenance documentation and use a computer · Must be able to hear in order to communicate effectively with co-workers and supervisors. · Stand/Walk- Must be able to stand for extended period and walk throughout the properties to complete maintenance tasks and inspections · Climbing/Bending/Kneeling-Must be able to perform maintenance activities that require climbing, bending, stooping, and kneeling. · Lift/Push/Pull-Must be able to routinely lift and move 50+ pounds · Dexterity/Grasping/Feeling-Must be able to safely use hand tools, power tools, and maintenance equipment. · Working on ladders at varying heights Work Environment: · Must follow all safety procedures and wear required PPE · May be exposed to varying temperatures and outdoor conditions while performing maintenance tasks. \nCompany Description NECG is a well-established, full-service commercial real estate firm with a strong presence in the industry. This position offers the opportunity to be part of a team that values excellence and provides long-term career growth and development opportunities in the real estate industry. NECG is a well-established, full-service commercial real estate firm with a strong presence in the industry. This position offers the opportunity to be part of a team that values excellence and provides long-term career growth and development opportunities in the real estate industry.

Own Every Moment at NetApp At NetApp, your ideas power innovation. We lead in intelligent data infrastructure—delivering unified storage, integrated data services, and solutions that help organizations unlock the full potential of their data, from AI to multicloud. Ready to innovate and contribute to our path to $10B? Here, you'll collaborate with passionate teams, tackle real-world challenges, and see your impact in how customers transform and grow. If you're ready to bring curiosity, creativity, and drive to every moment, NetApp is where your journey begins. Join teams that innovate to elevate, drive results, and excel together across every function. We at NetApp believe in the transformative power of data – to expand customer touchpoints, to foster greater innovation, and to optimize operations. We are designed for simplicity, optimized to protect, created to embrace future opportunities, and open to enrich choice. We are the data authority for hybrid cloud, and we are helping our customers realize the full potential of their data. We have built an intelligent Data Fabric for a data-driven world – to simplify and integrate data management across the resources that are best for the business. This is a transformational role within NetApp that will drive our Cloud Go-To-Market (GTM) with Hyperscalers’ (e.g. AWS, Azure, GCP, OCI) key Sellers, Customers, and Partners for a new service. This position acts as a hybrid between a strategic sales leader and a Business Development Manager, responsible for all aspects of joint selling, pipeline development, market intelligence gathering, and management of NetApp and hyperscaler sellers. Not only will this position be responsible for day-to-day sales leadership and revenue generation, but it will also provide vital customer feedback into our product organizations to shape our product vision and support strategic marketing activities. You will help end customers and partners evaluate the service for their workloads, applications, and data needs in the cloud, recommend solutions that meet requirements, and remove roadblocks to deployment. Location: Ideal candidates are East Coast based • Drive Cloud Consumption: Work closely with hyperscaler partner to drive service consumption through priority Sellers, Customers, Partners, and the Marketplaces., • Pipeline & Business Development: Develop a strong pipeline of new customers and projects through direct or indirect customer contact, prospecting, and proactive business development strategies., • Sales Planning & Execution: Develop and maintain an MRR and ARR Sales Plan that includes mapping to the appropriate hyperscaler resources. Prospect into the partner community and NetApp Account/Specialist Teams to build relationships, manage sales opportunities, and deliver targeted revenue., • Technical & Value Selling: Perform high-level product discussions, respond to client inquiries, and translate customer needs into actionable features. Differentiate NetApp's offerings to support successful deals., • Market Intelligence & Strategy: Mine customer interaction data for the business intelligence that enables the building of effective customer strategies. Provide input into strategic marketing activities for new products and enhancements based on customer needs., • Disciplined Business Management: Maintain an accurate SFDC pipeline, produce lead reports, document important customer opportunities, and ensure leads are followed through to completion., • Business Development & Market Research: Extensive experience in business development tools, exploring potential growth areas, and utilizing market research to position products effectively., • Cloud & Hyperscaler Expertise: Clear and demonstrated understanding of Hyperscaler Marketplaces and expertise selling large cloud deals to senior business decision-makers by aligning cloud value to business pain points., • Strategic Sales Planning & Execution: Deep knowledge of sales scoping, qualification, value selling, and developing future-oriented sales plans that support the overall business strategy and ROI justification., • Delivering Results for Customers: Extensive experience understanding customer needs and business processes, then delivering outcomes that address their most pressing business priorities., • Effective Collaboration & Communication: Proven ability to work collaboratively in a fluid environment, manage relationships with diverse stakeholders, and communicate high business impact solutions that enable digital transformation., • Experience: 10+ years of demonstrated sales leadership and business development success, including partner GTM sales and emerging business growth., • Education: A Bachelor of Arts or Sciences Degree in STEM or a related field is required. A Graduate Degree is highly desired. The target salary range for this position is 287,300 - 371,800 USD. The salary offered will be determined by the candidate's location, qualifications, experience, and education and may be outside of this range. The range is based on 'On Target Earnings’ (OTE) representing the total potential earnings, which is the sum of the base salary and potential commission earned when performance targets are achieved. Final compensation packages are competitive and in line with industry standards, reflecting a variety of factors, and include a comprehensive benefits package. This may cover Health Insurance, Life Insurance, Retirement or Pension Plans, Paid Time Off (PTO), various Leave options, employee stock purchase plan, and/or restricted stocks (RSU’s). These offerings are subject to regional variations and governed by local laws, regulations, and company policies. We will provide detailed information about the specific benefits for your region during the recruitment process. At NetApp, we embrace a hybrid working environment designed to strengthen connection, collaboration, and culture for all employees. This means that most roles will have some level of in-office and/or in-person expectations, which will be shared during the recruitment process. Equal Opportunity Employer: NetApp is firmly committed to Equal Employment Opportunity (EEO) and to compliance with all federal, state and local laws that prohibit employment discrimination based on age, race, color, gender, sexual orientation, gender identity, national origin, religion, disability or genetic information, pregnancy, protected veteran status, and any other protected classification. Why You'll Thrive at NetApp At NetApp, you won't wait for the perfect moment—you'll make it. The early planning, the extra thought, the bold idea that turns good into great: That's how our people operate and how we continue to push the boundaries of data infrastructure. NetApp is the trusted partner for organizations transforming data into opportunity. As the only enterprise-grade storage service natively embedded in Google Cloud, AWS, and Microsoft Azure, we empower customers to run everything from traditional workloads to enterprise AI with unmatched performance, resilience, and security. Our culture We celebrate mold breakers, bold thinkers, and problem solvers. We reward initiative, impact, and ownership. We provide flexibility so you can balance professional ambition with your personal life. Here, differences are not just welcomed—they drive everything we do. If you're ready to innovate, rise to the challenge, and own every moment - make your next move your best one. Apply now. Submitting an Application To ensure a streamlined and fair hiring process for all candidates, our team only reviews applications submitted through our company website. This practice allows us to track, assess, and respond to applicants efficiently. Emailing our employees, recruiters, or Human Resources personnel directly will not influence your application. AI Disclosure For select roles, some stages of our hiring process may use artificial intelligence tools to help evaluate applications and candidate selection. These tools support—rather than replace—human decision-making.

Job DescriptionJob Description: Automotive Service Technician Customer satisfaction is a result of your personal work habits and ethics and is of utmost importance as part of your job function. The Service Technician is also responsible for setting goals for personal service improvement, and monitor progress against customer satisfaction index numbers and production numbers as provided by the Service Manager. Responsibilities: Primary Responsibilities: o Correctly troubleshoot customer concerns using the latest administrative and technical tools provided o Ensure that common courtesy is shown toward all customers you come into contact with o While in the vicinity of the Service Drive, act as a secondary customer greeter to customers that have not yet been acknowledged o Keep up to date with all technical publications, Service Comm, and Asist terminal operations o Make every reasonable effort to ensure safe and honorable vehicle service is delivered as promised the first time o Address all original customer concerns before moving onto additional sales o Inspect every vehicle for additional sales opportunities ensuring that the vehicle is being maintained to the local area and factory recommendation o Ensure the customers vehicle is returned as clean, or cleaner than when it arrived o Participate in any Factory, or in-house sponsored training programs offered to you o Complete all paperwork completely and correctly, then ensure all required shop forms are attached to the RO hard copy o Perform any other duties assigned by the Service Manager, ASM or Group Leader o Always come to work on time, ready to work, and in a clean uniform Job Requirement:Ideal candidates will have: Toyota or Lexus but will consider other manufacturers experience • Preferred brands or certifications - Toyota or Lexus and ASE certified • Pay ranges / compensation structure – 120k plus. Flat rate plus bonuses. Excellent benefit plan with medical, dental and 401k plan • Open Monday thru Saturday. Tech schedule is 40 hrs per week • Relocation assistance options - yes • Flat-rate expectations – expected to produce 40 hrs a week • Shop hours / work environment – Monday, Wednesday, Friday 7am to 6pm/ Tuesday, Thursday 7am to 7pm/ Saturday 7am to 5pm • Credentials or certifications required – Would prefer Toyota certified but will consider other manufacturers certifications Experience in performing warranty and non-warranty inspections, diagnostic, maintenance, and repair service on various vehicle makes and models. Proven track record of achieving or over-achieving goals Outstanding communication skills Professional appearance and work ethic Great attitude with a high-energy personality Superior customer service skills Ability to read and comprehend instructions Ability to exercise good judgement Valid State drivers license and good driving record Required Education: High school diploma or equivalent Must have technical aptitude displayed by ASE certification Technical or trade school degree preferred Compensation: We offer competitive pay, health, paid vacation, paid holidays, and a professional work environment. Become a member of a winning team that offers growth opportunity, excellent earning potential and leadership that appreciates your drive, skills and ability. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. Its Time To Make The Most Important Move Of Your Career! Apply Now! We Would Really Like To Hear From You!

Location: Linden, NJ (ShopRite of Linden) Salary Range $16.00 - $18.00/hr Job Summary: To deliver a great customer experience while assisting the Bakery Manager in the daily operation of the department with baking, mixing dough, icing, packaging, filling, and decorating, of designated pastry and bread items in the Bakery Department; to maintain a neat, clean and visually appealing department and to perform other tasks as required in an efficient and safe manner, within Company policy. Minimum Required Qualifications: The minimum required qualifications for this position include, but are not limited to the following: • Ability to proficiently read, write, speak, analyze, interpret, and understand the English language., • Ability to assist the Bakery Manager., • Ability to stand, bend, twist, reach, push, pull and regularly lift 25 lbs., and occasionally lift up to 50 lbs., • Ability to work in varying temperatures., • Ability to work with fresh, dried and/or processed products, spices and powdered substances without negative allergic consequences., • Ability to tolerate dust and cleaning agents during routine housekeeping duties., • Ability to interact with Customers in a friendly and helpful way., • Ability to work cooperatively with others., • Ability to work all assigned work schedules and comply with all time and attendance policies. Essential Job Functions: Performance of the essential functions of this position require the Associate to possess the minimum qualifications listed above. These functions include, but are not limited to, the following: • Maintain a clean, neat, organized and safe work environment., • Maintain department sanitation and QA standards (safety, personal hygiene, clean cases, and equipment)., • Clean and sanitize all work surfaces, utensils and equipment., • Keep floor clear of debris and spills., • Greet all Customers and provide them with prompt, courteous service and assistance., • Maintain and properly use all department equipment as required., • Pack out product into display cases., • Rotate product to ensure freshness., • Ensure accurate signage for the department., • Prepare trays to Company's and Customer's satisfaction., • Perform all duties in accordance with Local, State and Federal regulations as they pertain to the Bakery operation., • Dress and groom according to Company policy including uniform, name badge and hat or hair restraint requirements., • Perform duties in accordance with QA hand washing standards and use disposable gloves when handling food., • Follow recipes to produce food products of specified flavor, texture, clarity, bouquet, or color., • Follow and adhere to weights and measures guidelines established by Federal, State, Local and Civic Standards., • Set up, operate, and tend equipment that cooks, mixes, blends or processes ingredients in the production of food products, according to formulas or recipes., • Rotate all merchandise in accordance with quality assurance standards to ensure freshness., • Prepare special order requests, as required., • Track movement of sales on production logs., • Take a complete & accurate inventory of supplies weekly and re-order supplies and ingredients as needed., • Check prices and be knowledgeable about location of items in the store., • Promote for sale any current charitable promotions to Customers., • Stand at work station for duration of scheduled shift, which may exceed 8 hours per day., • Receive deliveries., • Place reclamation in its proper location., • Regularly lift, pull, push and rotate merchandise that weights 25 lbs., and that occasionally weights up to 50 lbs., • Unload trucks and transport merchandise to Bakery Department that weights 25 lbs., and that occasionally weights up to 50 lbs., • Assist in other departments when instructed., • Perform all duties in accordance with Company rules, policies, safety requirements, and security standards and all Local, State and Federal health and civil code regulations., • Perform duties in accordance with the Company's HAZCOM program and adhere to manufacturer's label instructions for the safe and proper use of all chemical products., • Follow approved procedures for receiving, code dating, preparing, storing, and price marking, arranging, and restocking products to ensure quality, accuracy and product rotation and protection., • Handle damaged and spoiled products according to Company policy and assist in controlling the level of damaged goods., • Understand and adhere to Company shrink guidelines as relates to Bakery department operations., • Check refrigeration equipment for proper performance regularly; report any failure immediately., • Utilize and maintain equipment as required by department; report any equipment problems immediately., • Complete all applicable department training programs., • Perform all duties in accordance all ShopRite Service Priorities (Safety, Friendliness, Presentation, and Efficiency)., • Maintain punctual and regular attendance., • Work overtime as assigned., • Work cooperatively with others., • Must be 18 years or older to operate balers, hi-lo's, power jacks, and slicing machines., • Perform other duties as assigned. Important Disclaimer Notice: The above statements are only intended to represent the essential job functions and general nature of the work being performed and are not exhaustive of the tasks that an Associate may be required to perform. The employer reserves the right to revise this job description at any time and to require Associates to perform other tasks as circumstances or conditions of its business, competitive considerations, or the work environment change. This job description is not a guarantee of employment. Benefits Overview: This position is eligible for vision, dental, life insurance, and legal plan benefits, which become available on a graduated basis over time according to the terms of the collective bargaining agreement ("CBA"). Paid time off (sick time, personal days, vacation days, and holidays) will accrue on a graduated basis over time in accordance with the CBA. Retirement benefits (pension or 401k) become available over time in accordance with the CBA.

The Client Manager is a primary service owner responsible for delivering consistent, high-quality client service and supporting the long-term success of complex commercial property and casualty insurance programs. Review expiration lists and coordinate internal renewal strategy meetings with Produce

Customer Experience, and Associate Engagement) in accordance with our Purpose and Service Priorities under the direction of the General Store Manager.

Job Description Digital and Content Marketing Manager - Revelwood US & UK Looking for a career opportunity where you can learn from the best and the possibilities are endless? Join Revelwood as a Digital and Content Marketing Manager. Revelwood is a specialized consulting firm based in Florham Park, New Jersey, dedicated to transforming the "Office of Finance" by helping organizations close, consolidate, plan, monitor, and analyze business performance. We partner with finance leaders to move beyond tactical reporting into strategic decision-making, leveraging top-tier enterprise platforms like Workday Adaptive Planning, IBM Planning Analytics, and BlackLine. By harnessing the latest advancements in artificial intelligence (AI) and automation, we empower our clients with real-time, driver-based Financial Planning and Analysis (FP&A) solutions. Operating as collaborative partners rather than traditional vendors, our team is driven by a commitment to delivering "useware, not shelfware," and we pride ourselves on a strong internal culture rooted in passion, teamwork, integrity, and an unwavering commitment to always having our clients' backs. About the Role: Revelwood is looking for a dynamic, forward-thinking Marketing Manager to drive our lead generation and brand awareness activities across our US and UK business.. Whether you are a recent graduate with a strong portfolio or a seasoned professional re-entering the workforce, we are looking for a creative powerhouse who is fully up to speed on the latest B2B marketing tools, techniques, and trends. In this role, you will be the driving force behind our marketing campaigns, working closely with our sales team to generate high-quality leads. We are looking for someone who has strong communication and collaboration skills, with the ability to bring different teams together to maximise new marketing initiatives. Your knowledge and experience in leveraging modern AI tools to multiply your output and efficiency is essential. Key Responsibilities: Content Creation & Thought Leadership: Develop compelling, thought-provoking content that positions Revelwood as an industry leader. Write and produce case studies, whitepapers, blog posts, and customer success stories. Video Development & Production: Script, produce, and edit engaging video content for our website, social media, and digital campaigns to drive engagement and lead generation. Visual & Brand Identity: Act as the guardian of the Revelwood brand. Ensure a cohesive, modern, and highly professional visual identity across all platforms, materials, and digital touchpoints. Digital Advertising & B2B Social Media: Manage and execute B2B social media strategies (primarily LinkedIn) and digital advertising campaigns to drive targeted traffic and capture leads. Sales Alignment & Campaign Execution: Collaborate tightly with the sales team to design and execute highly targeted marketing campaigns that support the sales pipeline and drive revenue. AI & Marketing Tech Mastery: Utilize the latest AI tools (e.g., ChatGPT, Midjourney, Jasper, Canva, etc.) and marketing automation platforms to streamline content creation, optimize campaigns, and maximize your overall effectiveness. What We?re Looking For: Experience: Open. You could be a recent graduate with a stellar portfolio of marketing projects or a veteran marketer returning to the workforce. What matters most is your current skillset. Industry Understanding: Experience in or a strong understanding of our industry?specifically solutions for the Office of Finance, FP&A (Financial Planning & Analysis), or enterprise performance management (EPM). Modern Marketer: You are obsessed with the latest marketing trends and know how to leverage those trends into driving results. AI-Empowered: You embrace Artificial Intelligence as a tool to make you faster, more creative, and highly leveraged. Design & Visual Eye: You have a strong aesthetic sense and know what a great B2B brand should look like. Technical Proficiency: You are comfortable using modern CRM, marketing automation, video editing, and design software. Experience with HubSpot, Apollo WordPress, Zoom Webinars and Canva are a plus. Results-Driven: You understand that the ultimate goal of marketing is lead generation and business growth. Compensation & Perks: OTE: $70K-$110K total Comp. Note: Actual compensation will be based on factors such as previous experience, location, performance and results. Benefits: Comprehensive medical, dental, vision, life/LTD, 401(k), and generous PTO. Location: NY/NJ office hybrid preferred but will consider U.S. East Coast based remote for the right candidate. Note, Salary is commensurate with relevant experience and skills, and location, among others. Revelwood, in good faith, believes that the posted salary range is accurate for this role. We believe that our salary ranges are competitive relative to our organisation size and industry. Additional components include bonus, healthcare benefits, 401K, paid time off and various work perks. Details will be discussed during the interview process. This range may be modified in the future.

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

Merchandising Manager will be responsible for conducting routine visits to all stores in the East Coast region. The Merchandising Manager (Buyer) is responsible for planning, sourcing, negotiating, and managing the procurement of regionally managed products to support business goals.

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a short video to see what the job is like.Complete our online application process.Receive your job offer and

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

Ability to take direction and instruction from managers and be accountable for own actions. If a team member requires an accommodation, they must notify the site manager or the Corporate Human Resources Department. If an applicant requires an accommodation, they must notify the hiring manager and/or

Performs all functions related to processing (preparation) and merchandising in the produce department.

Ability to take direction and instruction from managers and be accountable for own actions. If a team member requires an accommodation, they must notify the site manager or the Corporate Human Resources Department. If an applicant requires an accommodation, they must notify the hiring manager and/or