Quality engineer jobs in Plainfield, NJCreate job alerts

Job DescriptionPPG is a sister company of QISG under the parent Quanta Services, Inc. This posting is for a direct hire position of Phoenix Power Group and is solely for the purpose of Phoenix Power Group. Phoenix Power Group (PPG) is a leading Construction Services Company providing Engineering, Procurement, and Construction (EPC) Services specializing in the installation of utility and industrial process infrastructure including substations, power generation, industrial process facilities, and renewable fuel projects in North America. PPG is a subsidiary of Quanta Services Inc., the largest specialty contractor in North America, providing large single-source solutions and leading the industry in its ability to deliver a collective scope of services, expertise, and manpower. PRIMARY FUNCTION The Building Construction Coordinator provides on-site oversight, coordination, management, and technical expertise for all aspects of the facility building (which will house utility electrical equipment and support systems, electrical switchgear and maintenance and office spaces) and interfaces daily with the overall Site Construction Manager and other site discipline supervisors/coordinators and the site safety manager to ensure the building construction is executed in a safe manner in accordance with the project specifications, schedule and within budget. The buildings for this project are being designed by PPG’s engineer and will be constructed by a subcontracted general contractor. TYPICAL RESPONSIBILITIES • Monitors work by and assesses progress of all discipline subcontractors, including civil, structural mechanical, plumbing and electrical., • Works with discipline supervisors (Coordinators) and the Site Construction Manager to ensure subcontractors are working efficiently to meet contracting requirements, budgets, forecasts, schedules and quality and environmental requirements., • Manages project costs to ensure budgets are maintained. Documents and manages changes in the work to ensure the interests of all stakeholders in the project are reasonably met., • Manages schedule to achieve project milestones and makes adjustments based on project changes., • Provides periodic progress updates and reporting to the Site Construction Manager and Project Manager., • Provides daily direction to all subcontractors., • Coordinates with the Site Safety Manager to integrate safety into project plans, reinforces safety policies, supports safety training and corrects unsafe conditions as related to the building construction., • Supervises total building construction effort to ensure the productivity of subcontractors and contractual performance goals are being met., • Reviews subcontractor work packages, project plans and specifications to ensure compliance with building codes and regulations., • Assists subcontractors with project scope development, questions and problem resolution., • Coordinates efforts across the entire project between Owner, project management, engineers, subcontractors, QA/QC and Safety., • Systematically and regularly appraises and evaluates progress against goals, timelines, and objectives., • Conducts daily site coordination meetings with subcontractors., • Ensures project environmental, regulatory and safety requirements are adhered to during building construction activities., • Coordinates with start-up team during the start-up, commissioning and testing of the facility., • Proactively identifies issues that could lead to problems and facilitates solutions., • Manages the project closeout process to ensure timely completion. Position Reports to: Site Construction Manager REQUIRED EXPERIENCE AND EDUCATION • At least 5 years of experience in managing building trades for the construction of large commercial and industrial buildings with leadership responsibilities in construction and possessing knowledge of building engineering/design, preferably in an EPC environment., • 10 - 15 years of related industrial building trades construction experience with a track record of achievement on large complex projects., • Background in projects involving high voltage electrical facilities and associated subsystems is preferred, but not required., • Strong knowledge of all aspects of building construction (civil, structural, architectural, mechanical, electrical and plumbing), craft agreements, jurisdiction, engineering, and safety., • Experience with project controls, scheduling, and reporting., • A high degree of familiarity with contract and subcontract documents, terms, and conditions., • Strong leadership, team building, and management skills., • General understanding of Building Codes, Mechanical Codes, Electrical Codes and Plumbing Codes as they relate to construction of a Building., • General understanding of Building Permits is a plus., • Demonstrated strong leadership ability., • Strong organizational and time management abilities., • Strong interpersonal, written, and verbal communication skills. TRAVEL REQUIREMENTS • Travel: Yes hcIQTXVx7O

Job Title: Contract Controls Engineer Location: Summit, NJ Type: Contract (3-6 months) CONTRACT CONTROLS ENGINEER RESPONSIBILITIES Design, programming, testing, implementation, and troubleshooting of Python based control systems, while adhering to company standards. Develop and test programs on Raspberry Pi 3 and 4, with Sleepy Pi 2 add-on, using Python (2.x and 3.x). Develop Python algorithm for dynamic database updates that do not require Raspberry Pi power-down. Develop and implement Python PID auto-tuning algorithm by manual implementation or using existing control or PID dedicated libraries, for dynamically adjusting PID values based on motor characteristics (DC and stepper motors). Refactor existing codebase to improve structure, readability, and maintainability by organizing code files and adding detailed documentation and comments. QUALIFICATIONS 2+ years of experience in writing programs on Raspberry Pi 3 and 4, with Sleepy Pi 2 add-on, using Python (2.x and 3.x) from scratch. 2+ years of experience in using I2C and SPI communication protocols with Raspberry Pi. 1+ years of experience in development and implementation of Python PID auto-tuning algorithm by manual implementation or using existing Control library or PID dedicated libraries, for dynamically adjusting PID values. 1+ years of experience in setup and use of SQLite Database on Raspberry Pi. Move materials and tools weighing up to 50 pounds. Use and operate tools, wires, and small components. Ability to identify color-coded wiring and detect sound. PREFERRED EXPERIENCE 2+ years of experience in using version control systems (e.g., Git). 1+ years of experience in working with electrical circuits and troubleshooting at undergraduate II level. 1+ years of hands-on experience with DC and stepper motors, including control and feedback mechanisms. 1+ years of experience in either of PID control loop auto-tuning methods: Ziegler-Nichols or Cohen-Coon. 1+ years of experience in other programming languages (e.g., C/C++). System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Title: Senior Architect - Mission Critical Facilities Job Type: Full-time. On-Site in Edison, NJ Company Overview: New Jersey Data Center growing Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Computing included. These are the business trends we help clients address. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures. Job Description: We are seeking a Senior Architect who is fully competent in all conventional aspects of Architecture with a specific emphasis on Mission Critical Facilities supporting Office Space. The successful candidate will be required to independently solve problems encountered and perform architectural assignments under general supervision, and use independent judgment in the evaluation, selection, and substantial adaptation/modification of standard techniques, procedures, and criteria. Key Responsibilities: • Team management and coordination of architects and/or technicians on assigned work to ensure that the work is being coordinated between disciplines and tasks are completed on schedule, • Act as the liaison between vendors, contractors, as well as the Operations team to meet deliverables and completion dates, • Draft, write, and proofread full reports and specifications, • Assist with project proposals, scope of work, schedules, and fees, • Develop budget estimates, • Prepare and/or supervise preparation of architectural plans and renderings, consult manufacturers, evaluate and select materials, and inspect architectural features of structures in the field Requirements: • 5-10 years of architectural experience with NCARB registration, • Ability to design in CADD, • Design ability in Revit, and/or BIM is a plus, but preferred., • Registration as a licensed Architect is required for this classification, • Excellent writing skills Travel and Work Schedule: • Normal business hours are Monday through Friday, 8 am - 5 pm. Competitive Benefits: • Comprehensive benefits include Medical, Dental, Vision, Life Insurance, and paid time off., • Salary is based on skill and experience., • Salary range: $100,000 - $130,000 BRUNS-PAK is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, gender identity and/or expression, national origin, disability, veteran, or other protected status.

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy. A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments. Compensation The base hourly rate for this position is $37.18. Johns Manville in Edison, NJ is recruiting for an Industrial Maintenance Mechanic/Millwright Under the direct supervision of the Plant Engineer, responsible for performing all duties in a safe, quality driven, efficient, and professional manner. Working from general instructions from the plant management team, and all levels within the organization in support of the four Johns Manville core values: People, Passion, Performance, and Protection. $39.44 overtime after 40 hours worked. Two shifts available - Monday through Friday Shift: 2pm - 10:30pm Shift: 10:00am - 6:30pm Your Day to Day: • Supervise/manage small projects as assigned. Work independently., • Operate various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs., • Maintains, adjusts, services and lubricates plant equipment such as production machines, mobile equipment, pumps, valves and other process related equipment. Inspects and determines required repairs., • Maintains and makes repairs to plant buildings, facilities, utilities and area systems involving plumbing, carpentry, masonry, pipe fitting and other related crafts., • Diagnose, repair and install power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components., • Performs welding and gas cutting as required., • Diagnose, repair and install pneumatic and hydraulics systems - cylinders, hoses, pumps and valves., • Reports time and documents work orders appropriately to SAP. 9. Utilizes inventory system and assures all parts are removed and returned to inventory as required., • Assists in production line changeover and setup and ability to lead if needed., • Maintain maintenance, TPM, deviation/inspection and other required electronic and written logs as instructed, • Operate overhead crane and lift devices safely & efficiently, • Direct multi-crafts daily in task & job assignment, • Lead MRO Cycle counting Process, • Installation of new equipment as necessary, • Observe specific parts of equipment and materials in process to determine or analyze the cause of machine malfunctions., • Repair and/or make any necessary adjustments to equipment to obtain desired operating results, • Work with engineers, part/mold designers, and other management personnel to set up, operate, and debug assigned equipment, • Provide ownership and input of extrusion and thermoforming processes and equipment for the reduction of downtime., • Start-up, Shutdown, & Set-up of 3 of 3 of the following areas (Inline, Comets, Extrusion), • Initiate/update Preventive Maintenance (PM’s), Standard Operating Procedures (SOP’s), Pre-Task Plans (PTP’s), Safety, • Audits etc., to provide efficient operation of Maintenance Department. What You Bring to the Team: • Minimum of High School Diploma with technical college certification or Associates degree in technical discipline with 7 or more years of industrial experience in mechanical/electrical repairs -- or -- 10 years of strong industrial experience in mechanical/electrical repairs in lieu of a formal education, • Experience operating various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs, • Welding, gas cutting, and fabrication experience, • Experience diagnosing, repairing, and installing power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components, • Intermediate experience with Microsoft Office Suite, • Flexible in work and assignments PHYSICAL DEMANDS: Note: The physical demands described below are representative of those that must be met by and employee to successfully perform the essential functions of this job. • Must be able to stand for long periods of time on cement floors, • Must be able to walk, stoop, kneel, bend and climb ladders and staircases, • Must be able to lift up to 50 lbs. as required Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team. Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees. Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs. Diversity & Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&I council is composed of employees from locations across North American & Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity & inclusion initiatives on JM’s Career page. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Description Job Title: Manufacturing Engineer Location: On Site - Iselin, New Jersey, United States Salary: $80,000 - $110,000 Skills: CAD, SolidWorks, Tooling, Fixtures, Process Improvement About the Machinery Manufacturing Company / The Opportunity: Our client, a dynamic company in the machinery manufacturing industry, is seeking a Manufacturing Engineer to join their team in Iselin, New Jersey. This is an exciting opportunity to contribute to the design and improvement of manufacturing processes, tooling, and fixtures while ensuring high product quality and production efficiency. The role offers the chance to work in a regulated environment, focusing on cleanroom operations, process validation, and cross-functional collaboration. If you are a motivated professional looking to make an impact, this opportunity is perfect for you. • Responsibilities:Design, develop, and enhance manufacturing processes, tooling, and fixtures., • Evaluate and maintain production equipment to ensure optimal performance., • Support production operations, including conducting process validations., • Collaborate with vendors for incoming components and ensure quality standards., • Troubleshoot and resolve manufacturing process and equipment issues., • Apply statistical tools such as Gage R&R, Cp, Cpk, and SPC to optimize processes., • Implement manufacturing concepts like Value Stream Mapping, 5S, and Visual Workplace., • Prepare and maintain protocols, reports, and process documentation., • Work with cross-functional teams to drive process improvements and innovation., • Ensure compliance with FDA regulations, QMS standards, and company policies., • Must-Have Skills:Bachelor’s degree in Mechanical, Electrical, Chemical, Biomedical, or Manufacturing Engineering, or equivalent experience., • 3–5 years of engineering experience in medical device manufacturing or a similar regulated industry., • Experience with cleanroom operations, process validation, and handling production materials/chemicals., • Proficiency in Microsoft Word and Excel, with experience in SolidWorks, Minitab, and CAD., • Strong organizational, problem-solving, and communication skills., • Nice-to-Have Skills:Experience in FDA-regulated environments and familiarity with QMS standards., • Knowledge of advanced manufacturing methods and techniques., • Experience with statistical process control and data analysis tools., • Ability to work independently and collaboratively in a fast-paced environment., • Hands-on experience with lean manufacturing concepts and methodologies.

Job Description Title : Data Quality Engineer Location: Madison, NJ (Onsite role from Day 1) Duration: 12 Months+ Job Description : Mandatory requirements: Current Microsoft Reporting Tools (SSRS/PowerBI) testing experience.Must be good at SQL server.Experience with querying in snowflake,Good experience in working through all testing life cycle,Good understanding of Power BI functionality and reports.MS office tools. Good team player in Agile Scrum methodology projectMust have worked in the data project Job Description Through Understanding of SQL Concepts, Experience with querying in snowflake ,SQL Server DB Environments, Ability to write test cases based on acceptance criteria, Understand PBI Features & functionality, Able to do sanity & smoke testing in various environments, Team player & aware of Agile Scrum Methodology, Expertise with MS office tools.

• Strong background in scale or scaling up facilities (R&D to Manufacturing) 2. P&IDs (AutoCAD, Plant 3D, SolidWorks) 3. Global experience, • Experience: 8-10+ years in chemical engineering, with a strong background in process scale-up and facility design Responsibilities: The Sr. Process Engineer plays a critical role in leading the design, scale-up, and optimization of chemical manufacturing processes from lab to commercial scale. As a senior member of the Global Process Engineering Group (GPEG), this role provides deep chemical engineering and process development expertise, with a strong emphasis on reaction chemistry, P&ID development, and complex project execution. The engineer will act as a cross-functional technical leader, supporting global initiatives and ensuring robust, cost-effective, and high-quality process implementation. • Lead design and scale-up of chemical processes from laboratory to pilot and manufacturing scales with emphasis on reaction chemistry and process control., • Develop and maintain detailed and accurate Piping and Instrumentation Diagrams (P&IDs) for new and existing systems., • Design, execute, and analyze pilot-scale studies, driving process improvements and technology implementation., • Validate and troubleshoot processes and equipment to enhance product yield, consistency, and quality., • Collaborate with R&D, Operations, Quality, and Marketing to ensure seamless technology transfer and manufacturability of new products.

Job DescriptionAbout Yami: Founded in 2013, Yami’s mission is to bring the world closer for everyone to experience and enjoy. We make it easy to discover exciting flavors and trending products from Asia. Named Inc. Magazine’s fastest growing start-up on the ”Inc. 500 List.”, we’re committed to connecting people with authentic food, beauty, home, and wellness experiences through our e-commerce platform, iOS, and Android apps. About the Role : The supervisor of the Fulfillment Center provides leadership for the Fulfillment Center operation team. This person will be responsible for the operation of specific warehouse division activities. You will have the opportunity to coach and develop your Yami associates team. The major focus is to motivate, mentor, and manage your team. You will ensure the production, efficiency, and quality requirement in one or multiple functions among picking orders, packing, receiving, and stowing products while ensuring inventory accuracy, as well as safety management, problem-solving, and training programs. Excellent communication skills with all levels of management and staff will be imperative. Essential Job Responsibilities: • Provide operational supervision in a specific warehouse division with 10-50 associates, plan daily manpower needs, and set schedules to ensure the daily production capability and efficiency target., • Maintain safety and 5S standards, conduct the safety training, and 5S audit to comply with OSHA and company policies and procedures., • Manage quality, productivity, inventory, equipment, facility management, and customer delivery promises, ensure the operational goals are met and the standards are established and followed., • Resolve problems and address staffing needs, handle the complexities and have troubleshooting skills, be able to determine the root cause of defects, and implement corrective solutions., • Mentor, supervise and develop associates and leaders in areas of responsibility, provide feedback and positive reinforcement, handle employee questions, and concerns, and follow up with the intent to maintain a positive work environment., • Need to be data-driven, experienced with operation metrics, and can collect and analyze the existing data to conduct staff performance improvement initiatives., • Collaborate with support teams, including Process Engineer, ICQA, and HR to engage in daily Kaizen and projects., • Participate in process reengineering or WMS optimization from the insight of on-site practice. Qualifications and Requirements: • 2-3+ years of management experience in warehousing, manufacturing, eCommerce operation, or other relevant industries, • Strong communication skills in English, • High school Degree or above, • Dealing with Complexity, • Ability to work a flexible schedule and multitask, • Know lean manufacturing tools and could initiate Kaizen to bring continuous operational improvement., • Bilingual in Chinese preferred, • Job Type: Full-time Benefits & Compensation: • 401(k) matching, • Health insurance, • Vision insurance, • Dental insurance, • Paid time off (PTO): vacation, sick, and holidays, • Employee discount, • Coffee and snacks

Job DescriptionAbout UsWe are a rapidly growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. As we expand into a new facility, we are seeking an Electrical & Mechanical Engineer to enhance our production capabilities through advanced automation, control systems, and equipment reliability. This full-time position is for the first shift, starting at 7:30 AM and ending around 5:00 PM. Our ideal candidate has strong hands-on experience with food manufacturing machinery, coupled with in-depth electrical knowledge. They must be capable of diagnosing, repairing, and maintaining production equipment, including PLCs, VFDs, motors, conveyors, and other automated systems. Experience with facility power systems—120V, 208V, 240V, and 480V—is essential, along with familiarity with electrical codes and safety regulations. A valid electrical license or certification is a strong plus. Job SummaryWe are seeking an experienced Electrical & Automation Engineer to join our team. You will be directly involved with maintaining and improving our production machinery, designing and modifying electrical systems, and integrating automation solutions with an emphasis on food manufacturing requirements. You will work closely with engineering, maintenance, and operations teams to ensure uptime, product quality, and operational efficiency. The ideal candidate is self-motivated, detail-oriented, and comfortable working in a fast-paced manufacturing environment. Responsibilities • Diagnose, troubleshoot, and repair electrical and mechanical issues on food manufacturing equipment., • Work with PLCs, VFDs, motors, sensors, and automation controls to maintain and improve production efficiency., • Perform electrical installations, modifications, and upgrades for systems operating at 120V, 208V, 240V, and 480V., • Ensure compliance with all applicable electrical codes, safety standards, and best practices., • Collaborate with cross-functional teams to implement new machinery and automation projects., • Maintain detailed maintenance records and electrical schematics., • Provide technical support to production and maintenance staff., • Assist in developing preventive and predictive maintenance programs for electrical and automation systems. Qualifications • Bachelor’s or Master’s degree in Electrical Engineering or equivalent technical training with relevant manufacturing experience., • Strong knowledge of industrial electrical systems and codes, including 120/208/240/480V applications., • Hands-on experience with PLC programming, troubleshooting, and integration., • Familiarity with VFDs, motors, conveyors, packaging machinery, and related food manufacturing equipment., • Ability to read and interpret electrical schematics and mechanical diagrams., • Electrical license or certification strongly preferred., • Strong organizational and problem-solving skills., • Ability to multitask and prioritize in a dynamic production environment.

Job DescriptionPSC Biotech provides the life sciences with essential services to ensure that health care products are developed, manufactured, and distributed to the highest standards, in compliance with all applicable regulatory requirements. Our goal is to skyrocket our clients’ success, and you can be a part of our team’s achievements. Employing a global team of skilled professionals and experts that span across strategically located offices in North America, Europe, Asia and the Middle East, we are proud of the roles we have fulfilled to help our clients achieve success. The Experience With operations spanning the globe and featuring a multi-cultural team, PSC Biotech® is passionate about bringing the best and brightest together in an effort to form something truly special. When you make the decision to join our team, you will be offered the ability to feel inspired in your career, explore your professional passions, and work alongside a group of people who will value and nurture your talents. We are firm believers in coaching and developing the next generation of industry leaders and influencers. As such, you will not only be offered compensation and benefits structure that rewards you, but also be provided with the tools that will help you grow and learn. At PSC Biotech®, it’s about more than just a job—it’s about your career and your future. Your Role We are excited to accept applications for future opportunities. Join our talent pool for future openings by applying now. This is a W2-Temp 6-month role with potential FTE extension.We are seeking a highly skilled and detail-oriented Quality Assurance Engineer to join our team in the life science sector. The ideal candidate will have a strong background in quality assurance processes, with specialized experience in auditing, ensuring compliance with regulatory standards, and maintaining the highest quality standards in pharmaceutical production. This individual will play a crucial role in the review and assessment of manufacturing practices, quality control systems, and regulatory compliance within a highly regulated environment. • Develop, implement, and maintain quality assurance processes and procedures in alignment with industry standards and regulations., • Ensure all manufacturing processes comply with relevant regulations, including but not limited to FDA, EMA, ICH, and GMP guidelines., • Review batch records, validation documentation, and quality control data to ensure compliance and product quality., • Conduct internal and external audits to assess compliance with Good Manufacturing Practices (GMP), FDA regulations, and other relevant standards., • Collaborate with cross-functional teams to ensure effective implementation of audit findings and continuous improvement initiatives., • Prepare detailed audit reports, CAPA (Corrective and Preventive Actions) reports, and other documentation as required., • Maintain thorough and accurate records of quality assurance activities, audits, and regulatory communications., • Participate in the preparation and review of SOPs, work instructions, and other quality-related documents., • Lead or participate in continuous improvement initiatives, focusing on quality and operational efficiency. Requirements • Bachelor's degree in engineering or related technical field., • Minimum of 5+ years of experience in quality assurance within the life science industry., • Proven experience in conducting GMP audits, both internal and external, in a pharmaceutical or life sciences environment., • Experience with regulatory bodies such as the FDA, EMA, and other international regulatory agencies., • Familiarity with Quality Management Systems (QMS), CAPA, deviation management, and risk management., • Strong understanding of GMP regulations, FDA guidelines, and other applicable industry standards., • Excellent analytical and problem-solving skills., • Exceptional attention to detail and ability to identify potential areas of risk and non-compliance., • Strong verbal and written communication skills, with the ability to prepare clear and concise reports., • Travel is required. At PSC Biotech, many of our projects and clients are located in various regions around the country. Therefore, we value candidates who are willing and able to travel as needed for project assignments and client engagements. The ability to adapt to different locations, cultures, and work environments is essential, as it allows our team members to collaborate effectively with clients and colleagues nationally. Equal Opportunity Employment Statement PSC is committed to is committed to a policy of Equal Employment Opportunity with respect to all employees, interns, and applicants for employment. Consistent with this commitment, our policy is to comply with all applicable federal, state and local laws concerning employment discrimination. Accordingly, the Company prohibits discrimination against qualified employees, interns and applicants in all aspects of employment including, but not limited to: recruitment, interviewing, hiring (or failure or refusal to hire), evaluation, compensation, promotion, job assignment, transfer, demotion, training, leaves of absence, layoff, benefits, use of facilities, working conditions, termination and employer-sponsored activities and programs, including wellness, social and recreational programs. Employment decisions will be made without regard to an applicant’s, employee’s, or intern’s actual or perceived: race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age (40 or older), disability, genetic information, or any other status protected by law. #LI-RW1 BenefitsW2 Temp positions include our medical and sick time benefits. Adhering to the requirements of New Jersey's law on salary transparency, the salary bracket for this role is set between $100,000 - $115,000 annually. The offered salary may be adjusted based on various factors such as the applicant's qualifications, skills, and professional experience.

Job DescriptionBenefits: • Competitive salary Key Requirements: • Experience needed with Oracle Database Administration, as well as ETL/Data Engineering., • Skills: Proficiency in SQL, PL/SQL, Shell scripting, Python, and ETL tools (like Talend and Informatica)., • Pharma experience is a must, CRO experience is a plusQualifications:, • Expertise in Oracle Database Management: We are looking for someone who can effectively manage and maintain Oracle database instances across different environments (development, testing, production). The candidate needs a deep understanding of database administration tasks such as installation, upgrades, patching, performance tuning, security (access control and encryption), backup and recovery, and automation using scripting languages (e.g., SQL, PL/SQL, Shell scripting)., • Experience with Data Engineering & ETL: We are seeking a professional who is skilled in designing, developing, and implementing ETL (Extract, Transform, Load) processes to move data between systems. This includes building and maintaining data pipelines and working with ETL tools like Talend and Informatica PowerCenter, optimizing ETL performance, and ensuring data accuracy and quality. Flexible work from home options available.

Job Description Electrical Consultants, Inc. (ECI) is a leading power engineering consultant firm that provides engineering, system planning and studies, technical consultation, project management, surveying, environmental planning, commissioning/testing and construction services to electric utilities, energy developers and industrials throughout the U.S. Our experience includes system voltages from 4.16 kV through 765 kV. ECI has an immediate opening for a Substation Senior Engineer in Cranford, NJ. Responsibilities include the conceptual, preliminary and final detailed design of new, upgraded and expanded substations, including material procurement, construction and commissioning/startup support through energization. Engineering responsibilities include the development and delivery of physical, electrical, design studies, calculations, drawings, exhibits and specifications. Autonomous QA/QC responsibility in area(s) of primary physical substation design competence. Provide coaching and mentoring for less experienced engineers. Senior engineers coordinate the completion of specialized tasks with ECI's subject matter expert discipline groups such as Distribution Studies, Transmission Studies, Grounding Studies, Protection (relay coordination and settings), Civil Engineering, Communication (SCADA Integration), Transmission & Distribution Engineering, Environmental Planning, Surveying, Lands/Right-of-Way, and Project Management/Controls. Minimum Requirements: Bachelor of Science or Master's degree in Electrical Engineering, 10+ years' project and design engineering experience, or an acceptable combination of education and experience; excellent verbal and written communication skills; strong organization and planning skills; ability to work in a team environment; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules. A PE license is preferred. The successful applicant must have an advanced knowledge of power engineering principals, be expert regarding applicable codes, standards and design tools, possess basic project management execution skills, and have the ability to oversee and direct design personnel on a project team. Experience in utility or merchant power industry a plus. The successful applicant may be subject to client-mandated drug and background checking. Occasional travel/driving is required; therefore, the successful applicant will be subject to ECI's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include the following: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days and holidays, • Parental Leave Policy An Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Job Title: Project Administrator - Data Center Information Technology/Design/Engineering Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job) Project Administrator NJ Data Center growing Information Technology/Design/Engineer Firm is seeking a Project Administrator to join our team. The Project Administrator is responsible for managing the administrative tasks and logistical aspects of data center construction or expansion projects, including coordinating with various teams, tracking project progress, maintaining documentation, and ensuring smooth execution of project activities under the guidance of a project manager, all while adhering to deadlines and budget constraints; essentially acting as the organizational backbone for the project. Responsibilities include but are not limited to: • · Support project team on all administrative tasks and duties., • · Heavy client/vendor/supplier interaction., • · Preparation of spreadsheet reports, contracts documents, purchase and change order requests, presentations, and correspondence., • · Receive, maintain and distribute submittals, RFI’s, shop drawings and establish project log to record receipt and disposition of same., • · Coordinate project meetings and travel arrangements., • · Maintain electronic and manual database of all project files and archives., • · Other responsibilities normally performed in the execution of a Project Administrator position according to standard Architectural/Engineering industry practices., • · Three to five years experience in Engineering firms or related fields., • · BA is recommended., • · Must exhibit initiative, judgment, and quality in performance and responsibilities., • · Deadline and detail oriented., • · Proficiency in Microsoft Office, Word, Excel, Outlook, Power Point., • · Ability to work well with multi disciplines in a fast-paced environment. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description We’re Bentley Labs, a cutting-edge formulation and manufacturing partner to the World’s Best Beauty Brands! Our product formulation and production capabilities are wide-ranging and distinctive – with innovative, exciting products across skin care, bath and body, hair, and lip categories. Over the past 16 years, the Bentley team has grown to include some of the industry’s brightest stars. Our diverse and talented group are ever and truly a unit—working together toward an all-consuming vision to be the best. This is a place where we create products that matter, relationships that last, and where ambition is supported and rewarded! We know you work hard and we want you to be successful. What will we do for you? Let’s help you with tuition reimbursement. Don’t know something? Let us send you to classes. Have you heard of DOMO? We’ll teach you that too! Come on in and we’ll show you what else we have to offer you! Who you are…you celebrate your success and others too. You focus on the right solution with each customer. Your passion for providing outstanding service contributes to our high level of customer satisfaction. Building relationships is your strong suit. You like to have fun at work too! Loud laughing encouraged. SUMMARY: We are looking for a Mechanical Engineer with an interest to create and develop new and/or improving current equipment to create a state-of-the-art manufacturing facility. Owning responsible for all phases of the project life cycle including concept generation, preliminary and detail design, analysis, assembly, and test as well as manufacturing support. This role works closely with engineering and manufacturing teams to qualify and execute design inputs, as well as manage external suppliers, vendors, sub-contractors, and internal resources within the company. DUTIES AND RESPONSIBILITIES:  Maintain the knowledge base which consists of, but is not limited to, processes, documentation, engineering change orders, bills of material, product tables and system logs. Create and evaluate the documentation used in production.  Provide technical assistance during the sales phase of the project, including providing estimates of hours for design efforts.  Designs to meet requirements, ensure requirements are satisfied, while balancing the constraints of time and money.  Answers technical questions and resolving technical problems regarding the design, operation, and reliability of the equipment. Working closely with mechanics to trouble-shoot major breakdowns  Responsible for the design of the equipment, or process, develop drawings and BOM.  Creates the design schedule, establishes milestones, and manages the design effort to ensure quality and timeliness of the completed design package.  Serves as the primary focal point for all technical communications with the customer and internal group.  Establishes and maintains a design baseline and manages change orders.  Responds to shop floor feedback regarding technical problems encountered or improvements suggested during manufacture. Manages the resolution/ improvement process.  Inspects incoming equipment; completes FAT prior to shipment; creates and maintains manuals for equipment and custom job orders.  Manage the transferring of 2D CAD system to 3D (SolidWorks); Maintains CAD and SolidWorks databases and ensure accurate and timely retrieval of all engineering data.  Creates a system to maximize standardization with the capability to effectively deviate from standard designs when necessary.  Designs and maintains a system to ensure the continuous improvement of the engineering function to establish the company as a leader in state-of-the-art technology within its product lines.  Establishes the policies and procedures for tasks within this role to be performed on a continuing basis. QUALIFICATIONS:  Experience with production / manufacturing equipment  Degree in Mechanical Engineering  Ability to design solutions to improve productivity  Strong knowledge of machine functionality and baselines  Ability to create machine manuals / operating guide lines Reviewed by Date: Approved by Date: HR Approved Date: Last Update Next Update  Establish perimeters / setting from test result on equipment  Preform IQ, OQ, including FAT’s for new equipment  Knowledge in specifying proper equipment for manufacturing process  Ability to complete projects on time and on budget  Ability to manage multiple projects with no decline in quality control  Excellent verbal and written communication skills  Experience with working with outside vendors with equipment design and build  Bilingual a plus COMPETENCIES:  Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.  Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.  Teamwork--Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.  Planning/Organizing--Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.  Innovation--Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. PHYSICAL REQUIREMENTS:  Standing  Walking  Sitting  Typing/Keyboarding  Light work under 50 lbs. lifting

Job Description MEP Plumbing Engineer • Location: Union County, New Jersey (Central/Northern NJ) The Plumbing Engineer will be responsible for the design and coordination of plumbing systems within the context of MEP building services. The role includes system calculations, code compliance, documentation, and construction support. This position offers opportunities for career growth and mentorship within a collaborative engineering environment. Responsibilities • Design plumbing systems for commercial, residential, healthcare, institutional, and mixed-use projects., • Perform calculations for domestic water, sanitary, storm drainage, medical gas, natural gas, and fire protection systems., • Develop detailed plumbing drawings, schematics, and specifications in coordination with architectural and structural disciplines., • Ensure designs comply with applicable codes, standards, and client requirements (e.g., IPC, NFPA, LEED)., • Collaborate with project managers, engineers, and CAD/Revit designers to ensure high-quality project deliverables., • Review shop drawings, respond to RFIs, and provide construction administration support., • Participate in client meetings and present design concepts as needed., • Bachelor’s degree in Mechanical Engineering or related field, • 3–7 years of experience in plumbing system design within an MEP engineering or consulting firm, • EIT or PE license preferred (or actively pursuing)., • Proficiency with AutoCAD & Revit, • Knowledge of applicable codes (IPC, ASPE, NFPA, local building codes)., • Strong communication and organizational skills., • Competitive compensation and performance-based bonuses., • Comprehensive health, dental, and vision insurance., • 401(k) with employer match., • Paid time off, holidays, and flexible scheduling options., • Support for licensure, certifications (ASPE, LEED), and professional development., • Opportunity to work on impactful, high-profile projects with a collaborative MEP team. Alex Showers Liberty Personnel Services #ConsultingEngineering #Midsenior #LI-AS1 Key Words: (Plumbing Engineer, MEP, Mechanical Engineer, Revit, AutoCAD, EIT, PE, Professional Engineer, Engineer in Training)

Job Description InvestCloud is looking for a practical, detail-focused Database Engineer with a passion for financial data and a desire to grow into a hands-on architecture or platform engineering role. This is a great opportunity for someone early in their data career who enjoys working with real-world investment data, learning from experienced architects, and helping build the foundation for next-generation wealth technology. You’ll work on ingestion pipelines, optimize SQL queries, help model data for performance and scale, and gain exposure to both transactional systems and analytical workflows in the US Wealth space. What does a Great Database Engineer do You’ll partner with engineers, product managers, and data architects to build and maintain clean, scalable, and reliable datasets that power key digital experiences in wealth management. If you’re energized by structured data, interested in how trades, accounts, and positions come together behind the scenes—and you want to sharpen your skills with modern cloud tools—this is your path. Principal Responsibilities • Help design and maintain SQL-based schemas and pipelines for ingesting, transforming, and exposing wealth-related data (accounts, positions, transactions, performance).• Support file-based and table-based storage solutions—from raw data landing zones to curated data marts.• Write efficient, well-structured SQL for ETL/ELT jobs, data validation, and data modeling.• Assist in building out data access layers that support APIs, reports, dashboards, and performance analytics.• Collaborate with senior data architects and engineers to implement data modeling best practices.• Work with QA and product teams to validate accuracy, completeness, and business alignment of data.• Contribute to data documentation and internal knowledge sharing to reduce onboarding time and system confusion. Preferred Skills & Experience• 3+ years of experience in data engineering, database development, or ETL-focused role• Strong SQL skills and familiarity with relational databases (e.g., Postgres, SQL Server, Snowflake)• Exposure to cloud data services (e.g., AWS RDS, S3, Glue, Redshift, or equivalent)• A solid understanding of data modeling principles, including normalization, indexing, and performance tuning• Interest in or exposure to US Wealth Management data—especially trades, positions, custodians, or portfolio accounting systems• Eagerness to learn, collaborate, and grow your technical skills in a production environment Preferred Qualifications• Experience with financial datasets or vendors (e.g., custodians, CRMs, performance systems)• Exposure to data pipeline tools (e.g., dbt, Airflow, Talend) and scripting languages (e.g., Python, Shell)• Understanding of file-based formats (e.g., Parquet, JSON, CSV) and batch ingestion patterns• Familiarity with Agile/Scrum workflows, Jira, Confluence, GitWhat Sets You Apart• You care about data quality, structure, and traceability—not just getting the job done, but getting it right.• You’re curious about the business side of wealth data—why something is modeled a certain way, and how it will be used.• You’re looking for a place to grow your skills with mentorship and hands-on exposure to a modern financial data stack. About InvestCloud InvestCloud, a global leader in wealth technology, aspires to enable a smarter financial future. Driving the digital transformation of the wealth management industry, the company serves a broad array of clients globally, including Wealth and Asset Managers, Wirehouses, Banks, RIAs, and Insurers. In terms of scale, the company’s clients represent more than 40 percent of the $132 trillion of total assets globally. As a leader in delivering personalization and scale across advisory programs, including unified managed accounts (UMA) and separately managed accounts (SMA), the company is committed to the success of its clients. By equipping and enabling advisors and their clients with connected technology, enhanced intelligence, and inspired experiences, InvestCloud delivers leading digital wealth management and financial planning solutions, complemented by a dynamic data warehouse, which scale across the complete wealth continuum. In 2024, InvestCloud was named CNBC World’s Top Fintech Company, a proof point of the company’s commitment to innovation and client success. Headquartered in the United States, InvestCloud serves clients around the world. For more information, visit InvestCloud.com. Our Value • Client Connected, • Human Centered, • Technology Forward, • Respect + Integrity Invest Cloud is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law #LI-HJ1

Job Description Facilities Project Controls Analyst Location: South Plainfield, New Jersey (Hybrid, 3 days/week in-office, with site travel as needed) Position Type: Full-Time About Us CARIAN is a leading, women-owned, purpose-driven consulting and advisory firm dedicated to the power, renewables, and utilities sectors. We partner with top electric and gas utilities to navigate complex challenges, deliver transformative results, and shape a more resilient and sustainable energy future through innovative, strategic solutions. Position Overview CARIAN is seeking a Facilities Project Controls Analyst to support corporate real estate facilities construction projects. The role will focus on project controls, including planning, budgeting, forecasting, and variance analysis. The ideal candidate will have 3-5 years of experience as a Project Cost Engineer or Project Accountant, with a focus on supporting project delivery, financial tracking, reporting, and preparing executive presentations. Responsibilities: * Assist in creating the annual Capital & O&M cost plan for facilities projects. * Manage month-end, quarter-end, and year-end closing processes, including variance analysis and journal entries. * Oversee invoice management for contractors, ensuring timely and accurate processing and reconciliation with project budgets. * Track and forecast project costs and monthly spend, providing regular updates to project teams and leadership. * Identify and mitigate risks related to project costs, schedule delays, and scope changes. * Prepare presentations and reports for project stakeholders. * Collaborate with internal teams, contractors, and clients to ensure all project deliverables meet quality, timeline, and cost expectations. * Identify opportunities for cost savings and project efficiency through financial analysis. * Track and report project performance, ensuring alignment with schedules and budgets. * Ensure adherence to company standards, industry regulations, and safety protocols in all project documentation and execution. * Coordinate with contractors and internal teams to ensure project scope, cost, and timeline adherence. * Support ad-hoc reporting and analysis for decision-making. Qualifications: * Bachelor’s degree in Finance, Accounting, Engineering, or related field. * 3-5 years of experience as a Project Cost Engineer, Project Accountant, or similar role, with facilities or capital project experience. * Strong proficiency in Excel and financial systems. * Ability to prepare and present executive-level presentations. * Strong analytical, business, and communication skills. * Excellent planning, organization, and problem-solving abilities. * Familiarity with PMI project management processes. Desired (Not Required): * Experience with SAP planning tools, models, and processes. * Primavera P6 scheduling software proficiency. * CAPM or PMP Certification. Why CARIAN? Purpose-driven work – Help deliver infrastructure that powers communities. Industry reputation – Trusted by leading utilities for reliability and results. Career growth – Opportunities to take on leadership roles in engineering and program management. Collaborative culture – Join a team that values delivery excellence and long-term relationships. Competitive total rewards – Competitive pay, full benefits, 401(k) match, and meaningful work. CARIAN takes pride in being an Equal Opportunity Employer. We do not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, citizenship, gender identity, veteran status, disability, or any legally protected class. As a Woman-Owned Business Enterprise, CARIAN is committed to providing employment opportunities to women, veterans, and underrepresented minorities.

Job DescriptionSalary: Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond costsuch as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelors degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE This position will be responsible for providing maintenance and reliability engineering support, as well as general operations support at the Morses Mill (Linden, NJ) site. We are seeking a Reliability/Maintenance Engineer with experience in rotating and fixed equipment with an emphasis on reliability. The ideal candidate will be the owner of the reliability engineering function for the facility, ensuring and implementing best practices to maintain consistent and reliable equipment operations. The site regenerates spent sulfuric acid and processes acid gas to produce sulfuric acid. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): 1. Provide technical expertise on all matters of reliability engineering, assessment and monitoring for all process equipment, including mechanical, electrical, and instrument / control equipment., 2. Carry out reliability studies on existing equipment and recommend needed improvements in the areas of equipment philosophies, equipment strategies, equipment improvements and best practices for asset productivity, 3. Identify, Plan, and Execute reliability improvement projects and other assigned equipment/site improvement projects while following and completing site Management of Change procedures., 4. Leading the Reliability Program for all equipment such as turbines, pumps, compressors, valves, pressure vessels, heat exchangers and all other fixed equipment, 5. Lead incident investigations and perform root cause failure analysis for incidents with a suspected Mechanical Integrity/Quality Assurance cause, 6. Evaluate equipment failure modes and utilize engineering experience and training to develop solutions for eliminating/mitigating potential failure, 7. Monitor equipment performance and evaluate equipment history and failure trends to determine sources of poor component performance and implement improvements, 8. Define Condition Monitoring Inspection Requirements and lead the Predictive/Preventative Maintenance Program, 9. Advise and confer with engineers in design review meetings to provide reliability findings and recommendations to maximize equipment reliability, 10. Review engineering specifications/drawings and propose design modifications to improve reliability within cost and other performance requirements, 11. Develop and track site MIQA/Reliability metrics while developing and completing corrective actions for metric improvement, 12. Oversee/interact with maintenance organizations regarding maintenance repairs, repair plans, equipment installation, quality assurance requirements, etc… Performing Field contract administration., 13. Provide initial technical support for operational issues which may lead to coordinating with additional technical resources to develop a resolution for the issue., 14. Assist operations with troubleshooting, 15. Ensure Safety & Environmental compliance of equipment, 16. Lead Minor Capital Projects, 17. Member of site Process Safety Management Committee, with primary focus on Mechanical Integrity (MI) and Quality Assurance (QA). Follow up on action items related to audits and MIQA activities QUALIFICATIONS In order to be qualified for this role, the following is required: Education/Experience/Background • Bachelor's degree (B.S.) in an Engineering Discipline (Mechanical Engineering preferred), • Minimum 3 years relative experience working in/on Mechanical Integrity and Quality Assurance programs or in Maintenance Supervision, • Working knowledge of Process Safety Management (PSM), • Knowledge of mechanical and electrical systems, preventive and predictive maintenance technologies, and condition monitoring and fixed time maintenance strategies, • Familiarity with Non Destructive Testing methods, • Experience working within a Computerized Maintenance Management System (CMMS). SAP Experience is preferred, • Willingness to be available and on call 24/7 as needed due to business conditions, • Other preferred skills, • Familiarity with national standards such as API 510 & 570 & 653, ASME B31.1 & B31.3, NBIC, NACE SP 0294, • Familiarity with Non Destructive Testing methods such as Liquid Penetrant Testing (PT), Magnetic Particle Testing (MT), Radiographic Testing (RT) , Thermal/Infrared Testing (TIR) , Ultrasonic Testing (UT) , Vibration Analysis Testing (VA), etc.., • Familiarity with various welding techniques, • Experience working with Highly Hazardous Chemicals/High Hazard Process, • Manufacturing experience which includes exposure to Safety, Health, Environment, Quality, Maintenance and Continuous Improvement systems and tools, • Experience in Root Cause Failure Analysis and Incident investigations, • Demonstrated collaborative problem solving, excellent planning and organizational skills, • Strong interpersonal and communication skills and team work, • Strong analytical skills Individual must possess a Transportation Worker Identification Card (TWIC) or obtain a TWIC once employed PHYSICAL REQUIREMENTS/ WORK ENVIRONMENT • The work environment will include an office setting and working outside year round. Willing and able to climb ladders, climb stairs, stoop, bend, kneel, crawl, work from heights, enter confined spaces, stand for long periods of time, able to lift 30 lbs, wear required PPE. Must be clean shaven and have the ability to wear a full face respirator., • Travel 10% or less per year to support other NEXPERA sites, • Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Residing on the list of the Engineering News Record (ENR)’s Top 500 Design Firms in the nation, TPD is currently hiring a Civil Engineer to serve as a H&H Study/Design Task Leader for Projects in New Jersey & Pennsylvania, with the opportunity to grow into a Project Manager over time if that is a priority for the selected candidate. Our ideal candidate will have 5+ years of experience with H&H study/design and applicable software applications. Immediate projects will include H&H studies/designs for agency, county, municipal, institutional, and private clients in New Jersey and Pennsylvania. Job Requirements • Bachelor’s Degree in Civil Engineering (required), • P.E. License in New Jersey, or Pennsylvania, or both (one state required, and upon hiring, commitment to immediately apply for P.E. License in the other), • Ability to serve as a task leader for H&H studies and designs, including signing/sealing H&H modeling runs and H&H Reports (required), • Experience with software commonly used for H&H studies and designs in New Jersey and Pennsylvania, e.g. HEC-RAS, HEC-HMS, HEC-18, PondPACK or similar, etc., • Familiarity with CADD Software (MicroStation/OpenRoads, AutoCAD), • Familiarity with drainage design, stormwater management design, and E&S design (preferred), • Knowledge of Microsoft Office Suite (required) Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Project Engineer serves as support for the planning, design, and execution of capital projects while being the primary subject matter expert (SME) for electrical and utility MEP systems during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). Key systems include power distribution (medium/low voltage), UPS, emergency power, lighting, and building utility systems (e.g., process water, gases, vacuum, compressed air). This role focuses on ensuring these systems are designed, constructed, and commissioned to meet performance, reliability, and compliance standards. In addition to project execution, the Project Engineer will provide high-level technical guidance to junior facilities staff and support strategic decision-making for existing systems, but will not be responsible for daily maintenance. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $70,000 - $85,000, based on experience. Primary Responsibilities: Project Execution: • Lead the electrical/utility scope for major capital projects from design review to commissioning., • Review design drawings, technical specifications, and submittals for electrical distribution, backup power, grounding, and utility systems to ensure compliance with codes, project requirements, and best practices., • Coordinate with architects, engineers, and contractors to resolve design and field issues., • Oversee installation, testing, and commissioning of electrical and utility systems, ensuring proper performance verification and documentation., • Support construction scheduling, cost control, and quality management in collaboration with the Senior Construction Manager., • Conduct periodic inspections of existing electrical and utility systems to identify risks or upgrade opportunities., • Advise junior staff and vendors on maintenance strategies, safety protocols, and energy optimization measures., • Set technical standards for CMMS (Computerized Maintenance Management System) data entry and reporting related to electrical and utility systems., • Ensure designs and installations meet all applicable codes (NEC, NFPA, local/state building codes) and industry standards., • Bachelor's degree in Electrical Engineering, Architectural/Building Engineering (electrical emphasis), or a closely related field., • 3+ years of experience in electrical and utility systems engineering within industrial, life sciences, or manufacturing environments., • Proven track record in design review, construction coordination, and commissioning of power distribution and utility systems., • Strong understanding of NEC, NFPA, IEEE, and related electrical codes/standards., • Proficiency in reading and interpreting engineering drawings, specs, and as-builts., • Ability to manage multiple priorities in a fast-paced, project-driven environment., • Experience with process utilities for labs (e.g., DI/RO water, lab gases, vacuum, compressed air)., • Familiarity with Building Management Systems (BMS) and Energy Management Systems (EMS)., • PE (Professional Engineer) license, LEED AP, or equivalent certifications., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description About Spectrum Vascular Spectrum Vascular is an innovative medical device company focused on vascular access and medication management. Our mission is to improve the lives of patients worldwide by providing caregivers with high quality, innovative products with exceptional customer service. We are a company that was formed through the acquisition of a portfolio of trusted products that have been widely used by customers for decades. Innovation has been a core strategic pillar throughout our history and many of our products have been designed to deliver antimicrobial and antithrombogenic protection or to support certain patient populations such as those who are critically ill and pediatrics. This role represents a unique opportunity to join a dynamic and growing team with established products and an entrepreneurial mindset. Role Description: The Quality Engineer is responsible for providing hands-on support to assure the successful transfer of acquired technology to a contract manufacturing partner on schedule. This position will monitor, maintain, and/or improve the quality and performance of the Spectrum Vascular catheter product portfolio through technical evaluations, maintenance of design history files, and quality support to address user and/or business needs. Key Responsibilities: • Execute activities necessary to support the vascular access business, specifically the PICC and Mid-line catheter portfolio., • Monitors, maintains, and/or improves the quality and performance of the portfolio through technical evaluations, design history file maintenance, and design improvement implementation to address user and/or business needs., • Perform technical evaluations related to supplier and manufacturing changes to existing products., • Perform design change assessments to determine impact of changes to commercial products., • Support new indications, regulations, and marketed regions associated with existing commercial products., • Maintain Risk Management Files for existing products based on post market surveillance., • Interfaces with external suppliers and internal project teams to ensure the quality of Spectrum Vascular products., • Review test protocols and reports to support development and transfer of projects., • Ensure all activities are executed in alignment with design controls, with the proper documentation for traceability. Support Regulatory filing activities (per 21 CFR 820.30, 21 CFR part 4, ISO 13485), and work closely with team to establish and maintain design control procedures., • Partner with functional areas to develop appropriate prioritization plans and appropriately escalate changes in resource demand, risks, gaps, or challenges., • Facilitate decision-making, collaboration, and problem-solving with people at all levels of the organization to accomplish shared program., • Bachelor's degree in mechanical or biomedical engineering preferred., • Three years-plus of relevant medical device industry experience in quality engineering and/or manufacturing operations., • Knowledge and understanding of molding and extrusion operations, as well as assembly, labeling, and packaging., • Good understanding of FDA regulations, QMS, GMP and ISO standards., • Experience managing diverse project activities with contract CMO facilities, and in particular managing and communicating quality requirements between vendors., • Strong computer skills including proficiency in Excel, Word, SolidWorks, eQMS, and statistical methods., • Hands-on, roll-up-your-sleeves approach with high sense of urgency and drive for results., • Natural entrepreneurial spirit with unrelenting dedication to delivering results., • Desire to work in a fast-paced, innovative environment., • Remote-based, • Dynamic, interactive, fast-paced, and entrepreneurial environment, • Travel – up to 35%, additional may be required during execution of validation activities Spectrum Vascular is an Equal Opportunity Employer and committed to creating a diverse and inclusive company culture. Spectrum Vascular does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law. ime.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices. Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description CAD Operator: Full-time (Hourly) The candidate needed for this position with general supervision and proficiency will operate a CAD workstation, etc., to develop finished drawings. The individual will analyze sketches, notes, and other input material to determine the best approach to complete drawings. A CAD Operator will be fluent in various software packages so as to develop electronic plots as well as operate a plotter to transfer developed drawings to a reproducible medium. This position requires 1 to 2 years CAD experience with some technical coursework. The ability to utilize Revit is a plus and is preferred. Company DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Electrical Consultants, Inc. (ECI) is a leading power engineering consultant firm that provides engineering, system planning and studies, technical consultation, project management, surveying, environmental planning, commissioning/testing and construction services to electric utilities, energy developers and industrials throughout the U.S. Our experience includes system voltages from 4.16 kV through 765 kV. ECI has an immediate opening for a Protection Engineer. As a Protection Engineer, the successful candidate will provide power system protection services including system model development, short circuit analysis, relay settings development, area coordination studies, standards development, relay operation analysis, and technical reviews of drawings and relay settings. The successful candidate will also be in charge of mentoring less experienced engineers via direct training and technical review of work. Minimum Requirements: BSEE or equivalent degree; 5+ years protection engineering experience; SEL Relay Setting Experience; ASPEN OneLiner or PSSE CAPE experience; excellent verbal/written communication skills; strong organization and planning skills; ability to work in a team environment; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules required. P.E. license preferred. The successful applicant may be subject to client-mandated drug and background checking. Occasional travel/driving is required; therefore, the successful applicant will be subject to ECI's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments. Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Mechanical Engineer to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days., • Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilizing advanced CAD software to create detailed 2D and 3D models., • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to strictly comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and cutting-edge design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Requirements: Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software or mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment.

Job DescriptionSalary: $63,000-$89,000 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for road and bridge inspections. Our ideal candidate will be a highly motivated & qualified individual, with experience in soil testing, quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects.In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and the New York Metro, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. This job requires travel to various job sites within 75 miles of Woodbridge, NJ. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations., • Inspection of testing of soils., • Maintain project records., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Record monitoring well data., • Enter data for Test calculations., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification, • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various job sites within 75 miles of Woodbridge, NJ. Who you are: * • Bachelors degree in Biological Engineering, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Geological Engineering, Materials Engineering, Metallurgy Engineering, Structural Engineering, or Transportation Engineering., • Familiar with ASTM, AASHTO and ACI standards for testing and inspections., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, • International Code Council (ICC) - Soil Inspector, • New Jersey DCA Certified, • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey and New York., • US Citizenship; Authorized to work in the United States., • 3+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with gINT software., • NICET I or II certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job Description The Vibration Test Technician will assist in setting up, conducting, and documenting vibration testing for Valcor Space products. Collaborating with Engineers, they’ll assist in designing fixturing, integrating new products, perform vibration testing, and report results to verify product quality in a fast-paced production lab environment. Duties/Responsibilities: • Operate Electrodynamic Vibration systems as well as pneumatic systems to test the manufacture quality and overall dynamic response of valves, valve systems, and components., • Use basic hand tools to set up and run vibration and pneumatic testing of Valcor Space hardware., • Read and interpret technical documentation, such as procedures, drawing, and process travelers, appropriately., • Ensure test software is properly programmed to meet test requirements., • Work with Valcor Dynamics Test Engineer to understand dynamic concepts and product behavior., • Use critical thinking and understanding of troubleshooting steps to adjust and perform tests accordingly., • Create detailed documentation of all testing performed., • Employ Lean Manufacturing principles and initiatives if/when necessary, • Maintain a well organized and functional vibration lab, • Troubleshoot, repair, and/or report any equipment in need of repair to supervisor or applicable engineering group., • Ensure compliance with all safety, quality, maintenance, and company policies and procedures, • Working knowledge of vibration testing and applicable industry standards, • Actively participate in relevant team meetings, improvement programs, and initiatives to contribute to the achievement of company objectives., • Communicate effectively with internal and external stakeholders at all levels, • Maintain a clean, secure, and well-maintained work area., • Complete special projects, miscellaneous assignments, and related duties as needed., • High school diploma or equivalent, • Mechanical aptitude and the ability to understand and work with technical documentation., • Ability to work in a fast-paced environment and follow procedures while maintaining a detail-oriented workflow., • Ability to drive and execute against a delineated test schedule, • Effective verbal/written communication skills required for interacting with all levels of personnel within the organization., • Must not have vision impairment beyond usage of corrective lenses., • Often required to stand, squat, sit, bend, turn, balance, and move freely within the facility and around equipment to handle parts and set up tests. Salary Range:$24.00 To $40.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionSalary: Minimum of range $80,000 annually Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Sales Account Manager for our Integrated Services Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Sales Account Manager directly generates revenue by selling solutions to new and current clients within an assigned territory through face-to-face contact. Assists management in devising sales plans and strategies. The ideal candidate will be tenacious and proficient at developing long term relationships that grow year over year, will always be prepared to act as a consultant and resource to customers and a strong networker with creativity and marketing flair. The job does require some level of travel. Accountabilities • Develop self-generated leads through networking, data mining (from existing client records) and referral generation from previous clients., • Collaborate with Marketing to ensure consistent messaging to customers and help them gather voice of the customer information when needed., • Increase revenue from existing customers and generate additional revenue from new customers by promoting the following services. HVAC, plumbing, electrical, general contracting, preventative maintenance contracts and engineer site staffing., • Identify, qualify and close new preventative maintenance business opportunities., • Answer equipment related questions such as operations, features, and functions., • Perform required documentation for each installation and have each client sign necessary paperwork, and collect payments as directed., • Utilize job site walks to acquire system information., • Through commitment, high standards, persistence and drive, meet or exceed yearly sales revenue and margin goals. Qualifications Skills • Excellent track record in developing territory management to ensure market saturation and profitability, including sales strategies., • Experience with developing written proposals; delivering oral presentations to customers and other stakeholders in a professional manner., • Proficiency with sales management tracking databases., • Proficiency with Microsoft Office (Word, Excel,)., • Experience utilizing social media in a commercial capacity., • Knowledge of and ability to use CRM tools., • Must be able to build relationships and work well across functions. Education and Experience • Minimum of 3 years of successful High-volume, business-to-business (B2B) sales experience., • Commercial HVAC and plumbing industry experience is a plus., • Bachelors degree in business, advertising, marketing or mechanical engineering is a plus., • Clean driving record and valid drivers license; must have reliable transportation. Physical Requirements Physical activity is not limited to walking, bending, kneeling/crouching, pushing, pulling, lifting up to 30 lbs., sitting, standing periods of time and driving. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job DescriptionSalary: $70k-100k Position Overview: GRA Design Studio is seeking a skilled and motivated Mechanical Engineer to join our dynamic/engaging team. As a key player in our process-driven and creative engineering team, the ideal candidate will have a strong background in mechanical engineering with a focus on HVAC design. The Mechanical Engineer will be responsible for performing HVAC calculations, generating specifications, and sizing plumbing and gas piping systems. Additionally, the role involves creating detailed mechanical layouts, coordinating with other disciplines, and ensuring that designs are executed to the highest standards. This position requires proficiency in AutoCAD and/or Revit and strong project management skills. At GRA Design Studios, we pride ourselves on our end-to-end product line offering, national reach, and commitment to transparency and external communication. We are a disruptive force in the industry, known for our engaging and transparent approach to every project. Job Description: As a Mechanical, Electrical, Plumbing Engineer at GRA Design Studios, you will be responsible for the following: • HVAC Design: Perform load calculations, develop HVAC system layouts, and be responsible for HVAC material to meet project goals. You will also develop and maintain project schedules to ensure timely delivery., • Plumbing and Gas Piping: Size and design plumbing and gas piping systems, ensuring all layouts are accurate and code-compliant. Collaborate with other disciplines to seamlessly integrate these systems into the overall building design., • Layout Creation: Develop detailed mechanical, electrical and plumbing layouts using AutoCAD and/or Revit, ensuring accuracy, clarity, and compliance with standards., • Project Management: Oversee engineering projects from conception through completion, ensuring timelines, budgets, and quality standards are met. Maintain transparent communication with clients and stakeholders, providing regular updates and detailed reporting., • Documentation and Quality Assurance: Prepare detailed engineering reports, specifications, and documentation. Conduct pre and post construction site visits and inspections to verify that installations meet design intent and participate in the commissioning process., • Education: A Bachelors degree in Mechanical or Electrical Engineering or a closely related field from a 4-year accredited college or university., • Experience: A minimum of 3-5 years of engineering, with proficiency in AutoCAD and/or Revit. Experience in performing HVAC calculations, designing HVAC systems, and generating mechanical layouts is essential. Experience in sizing plumbing and gas piping systems is also required., • Certification: Engineer-In-Training (EIT) certification is preferred., • Skills: Strong project management, problem-solving abilities, attention to detail, and excellent communication skills, both written and verbal. Benefits: * • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. And for years, HORIBA Scientific’s OSIS division has been the preferred, reliable and consistent supplier of OEM spectroscopy components throughout the world … offering a complete range of OEM imaging miniature spectrographs and spectrometers along with CCD, Photodiode array (CMOS) and InGaAs detectors that operate from the UV through to the NIR. Our high reliability products and know-how are leveraged in a wide range of high-tech industries such as: Medical, Semiconductor, Pharmaceutical and Biotech to name a few. Presently, our HORIBA Scientific OSIS Division is searching for an experienced Lead Test Engineer for our North American operation located in Piscataway, New Jersey.The ideal candidate will possess a strong and proven test and measurement background for volume production validation of all electronic circuit boards incorporated into our analytical instruments and light detecting systems involving CCDs, PDAs, InGaAs, and CMOS sensors and related to both spectroscopy and imaging applications.If you are a self-motivated individual with a passion for your work that has garnered success in leading and contributing to team-oriented product development efforts, please keep reading and visit our corporate website to learn more Qualifications: • Advanced degree preferred in electrical engineering or computer engineering with 7+ years of directly related experience., • Minimum of a BSEE degree with 10+ years of directly related experience., • Will accept 15+ years of equivalent engineering design experience associated with test and validation of electronic circuit boards for data acquisition products and/or analytical instruments requiring a high level of field-deployed reliability. Responsibilities: • Develop the test methods and procedures needed to transition products from design into volume manufacturing., • Design accurate test circuits to validate functional performance of end-product detector/camera electronic board assemblies incorporating low-noise analog, power, and high-speed digital circuitry and interfaces., • Design, document, and maintain test fixtures for a volume electronic board turnkey manufacturing environment., • Collaborate with the internal design team and external contract MFG to identify, define, and resolve test issues., • Analyze and interpret test results to identify design and/or test-related problems. Requirements: • Solid understanding of electrical engineering principles in both analog and digital circuits, • Familiarity with low-noise analog and mixed-signal circuits involving op-amps, voltage references, LDOs, DACs, ADCs, and discrete semiconductors., • Demonstrated proficiency in circuit design for test and validation, • Experience with circuit modeling and simulation techniques, • Ability to guide and oversee PCB CAD designers for test fixture board design and development, • Familiarity with test equipment, including oscilloscopes, DVMs, power supplies, and Function Generators, • Sound test & troubleshooting skills., • Demonstrated technical leadership and management skills., • Strong problem-solving, communication, and interpersonal skills. Preferred: • Testing knowledge of electronic boards used in CCD/CMOS detector/camera products, • Experience testing densely populated surface mount electronic boards, • Background in LabVIEW programming a plus HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please email Jo Brodbeck or call (248) 925-1012 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing, and metrology to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. DUTIES: • Lead System Engineer for spectrometer product development and spectroscopy instrumentation including CCD spectrometers, cooled camera systems, prototyping, assembly, testing and automation, • Responsible for all opto-mechanical aspects of product development including: feasibility studies, design, testing/debugging, lab set up, data acquisition, data analysis including resolution, stray light and throughput, and other evaluations for prototype and production hardware, • Acting as Project manager, coordinating various engineering teams towards common goals: a successful, high-performance product, and an on-time release., • Assembly/testing/data analysis of prototypes and ramp-up volumes for design optimization, prior to release to manufacturing, • Must be able to work independently as THE Product Champion leading all R&D disciplines towards competitive product performance and meeting Marketing specifications and cost targets., • Documenting the project (for ISO) and manufacturing process with procedures and work instructions., • Training manufacturing technicians on new product releases and on changes to existing processes, • Writing and presenting reports to customers, engineering, marketing and management, • System BOM costing studies and reduction campaigns in various volumes, • Customer interfacing to support business development, technical support of sales team in pre-sale and post-sale situations, • Summary - Cross-functional collaboration: Bridge gaps between different departments like engineering teams, marketing, sales, and customer service to align efforts around the product, from the development phase to the technical support in pre-sale and post-sale situations. REQUIREMENTS: • Master’s Degree preferred in Physics, Mechanical, Opto-mechanical or Electro-Mechanical Engineering discipline, • 3+ years in Opto-mechanical system Design and/or Manufacturing Engineering role, industrialization and/or qualification/testing programs, • Experience in Mechanical design/engineering. Knowledge of Pro-E (preferred) or Solidworks, • Experience in Zemax or spectrometer alignment a plus, to verify simulated performance is met., • Experience in Spectral data acquisition and analysis a plus. Previous use of CCD and CMOS Scientific Cameras and knowledge of sensors specifications a plus., • Knowledge and experience in UV, visible and infrared optical design and analysis, • Excellent written and verbal communication skills, • Excellent analytical and technical problem-solving skills, • Position requires 4-5 days per week on-site, in Piscataway NJ, • U.S. Citizenship or permanent resident required Horiba offers a full benefit package which includes: Medical, Dental and Vision Life & Disability Vacation, Sick and Holiday Pay Educational Reimbursement 401K with company match Flexible Spending Account

Job Description Job Title: ERP Modernization Architect – VB to C# Conversion Position Location: Summit, NJ / Hybrid Reports To: Senior VP - IT Company Summary Sugar Foods LLC is a privately owned company with production facilities in Georgia, Massachusetts, California, and Mexico. Our products are sold and distributed throughout the U.S. and Canada. Sugar Foods manufactures and packages croutons, tortilla chips, crispy toppings, caramels, and chocolate syrups, as well as cheese-based toppings. Additionally, Sugar Foods packages a variety of items including sugar, sweeteners, powdered creamer, breadings, and coaters, and dried fruits and nuts. The Sugar Foods Way At Sugar Foods, the Customer is King, and our team is our Family. The vision of Sugar Foods is for our products to be on every plate and in every cup. We continue to grow our business and adapt to changing business conditions to consistently provide value to our customers, our associates, and our community, by adhering to high standards of quality and safety and always acting in a respectful and responsible manner. Position Overview We are seeking a highly skilled and business-minded ERP Modernization Architect to join a collaborative team tasked with reengineering our core, home-grown Order-to-Cash ERP system. Developed and refined over the past 30 years in Visual Basic 6, this mission-critical platform is being rewritten in C# to support long-term scalability and modernization. This role requires an individual who excels in architectural thinking, hands-on coding, and process understanding. You'll work closely with business leaders and legacy system experts to translate complex, custom logic into modern, maintainable C# code, while identifying and implementing opportunities to improve business workflows along the way. Key Responsibilities • Serve as the technical architect for the VB6-to-C# modernization effort, helping define structural approaches to code refactoring and system design., • Analyze legacy Visual Basic 6 code to extract, understand, and document business logic and system behavior., • Collaboratively re-implement this logic in C#, using best practices for performance, maintainability, and extensibility., • Work with IT and business stakeholders to validate business process fidelity and recommend enhancements when applicable., • Mentor developers on the team and ensure technical consistency and code quality across the modernization effort., • Contribute to system testing, performance tuning, and release planning. Required Technical Skills • Expert proficiency in C# and deep working knowledge of Visual Basic 6., • Proven experience designing and modernizing monolithic ERP or custom enterprise systems., • Strong knowledge of .NET Framework/.NET Core, object-oriented design, and service-oriented architecture., • Proficient with SQL Server, including writing and optimizing stored procedures and database structures., • Working knowledge of integrating Order-to-Cash systems with external systems in the ERP ecosystem, particularly:, • QAD for MRP/DRP (Material and Distribution Requirements Planning) functions., • Oracle Transportation Management (TMS) for outbound logistics and freight execution., • Ability to design or refactor interfaces between internal applications and external ERP modules (via APIs, flat files, or EDI)., • Familiarity with enterprise messaging patterns and system interoperability best practice., • Demonstrated ability to understand and reverse-engineer complex business logic embedded in legacy code., • Ability to collaborate with domain experts to ensure functional accuracy and continuity., • Strong communication and documentation skills — able to bridge the gap between technical implementation and business needs., • Comfortable working in a hybrid environment that blends remote development with on-site collaboration. Preferred Qualifications • Prior experience modernizing custom ERP or Order-to-Cash systems., • Experience in business process analysis, especially in inventory, order management, or finance workflows., • Background in mentoring or technical leadership within cross-functional project teams. Why Join Us This is a rare opportunity to influence the future of a mission-critical ERP platform while preserving the best of its legacy. You’ll work side-by-side with individuals who built the original system and bring decades of institutional knowledge, creating an ideal environment for deep learning, thoughtful innovation, and lasting impact. Sugar Foods is an Equal Opportunity Employer. The policy of Sugar Foods Corporation is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's race, color, gender, age, national origin, religion, citizenship status, marital status, sexual orientation, gender identity, transgender status, physical or mental disability, protected veteran status, genetic information, pregnancy, or any other categories protected by applicable federal, state or local laws. U.S. Employment: If you have any difficulty using our on-line system, you may use the alternative method described below to contact someone about your interest in employment at Sugar Foods Corporation. Please reference this statement and job reference you are applying for when contacting us. Tel: 678-952-7051. Sugar Foods Corporation is an E-Verify Company and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in job applicant procedures. "Equal Opportunity Employer: Minority/Female/Veteran/Disabled/Gender Identity/Sexual Orientation"

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The Lead Facility Engineer serves as the primary technical subject matter expert (SME) for mechanical, electrical, and plumbing (MEP) systems—particularly HVAC—during major facility construction and expansion projects (230,000+ sq ft plus additional lab buildouts). This role is responsible for ensuring that new facilities are designed, constructed, and commissioned to meet performance, safety, and compliance requirements. In addition to capital project responsibilities, the Lead Facility Engineer will provide high-level technical oversight of existing facilities, advising junior staff and aligning operational decisions with long-term reliability and efficiency goals. As GenScript grows its U.S. footprint, having robust, scalable infrastructure is essential. This role offers a rare opportunity to design foundational systems for how we manage equipment and facilities, while also driving in-house maintenance capability, energy efficiency, and cost optimization. Your leadership will directly influence operational resilience, response time, and long-term cost control. Details: This is a full-time role based onsite in Piscataway, NJ. The estimated salary range is $90,000 - $105,000, based on experience. Primary Responsibilities: • Serve as the HVAC/MEP technical lead for major capital projects, from design through commissioning., • Review and validate design documents, technical specifications, and contractor submittals for compliance with project requirements, codes, and best practices., • Coordinate with architects, engineers, and contractors to resolve design or field issues and ensure alignment with operational needs., • Oversee installation, testing, and commissioning of MEP systems, ensuring performance verification and turnover documentation are complete., • Support construction scheduling, cost control, and quality management, in collaboration with the Senior Construction Manager., • Lead and document punch list resolution for MEP scope., • Conduct periodic inspections and assessments of major building systems to identify risks or improvement opportunities., • Provide technical guidance to junior facilities staff and vendors managing day-to-day maintenance., • Lead the development and oversight of preventive maintenance plans for all facility-owned equipment (e.g., air handlers, boilers, pumps, compressors)., • Set standards for CMMS (Computerized Maintenance Management System) usage and review work order trends, costs, and completion rates for improvement opportunities., • Oversee the planning and supervision of facility routines, preventive maintenance, and operational readiness across all sites., • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Civil/Structural Engineering, Architectural/Building Engineering, or a closely related field., • 4-6+ years of relevant experience in facilities/MEP engineering, construction, or capital projects within industrial, life sciences, or manufacturing environments. Includes experience in HVAC preventative maintenance, balancing, assessment, and knowledge of fabrication techniques., • 2+ years in a technical lead or supervisory capacity., • Proven experience as an HVAC/MEP SME on large capital projects (design review, field coordination, installation oversight, commissioning)., • Experience with AutoCAD and MS Office., • Ability to read and interpret drawings, specs, and submittals, and coordinate RFIs/field changes., • Strong knowledge of the building process, construction principles, relevant codes, and industry standards., • Knowledge of controls and BMS (Building Management Systems)., • Demonstrated ability to set up and oversee preventive maintenance strategies for mission-critical equipment., • Experience in construction administration, commissioning, and startup of HVAC and mechanical/plumbing systems., • Experience in commissioning and system startup., • Understanding of EAV (Exhaust Air Valve), fume hoods, and ventilation requirements in specialized facilities., • Builds systems, not just reacts to problems — you design processes that prevent recurring issues., • Thinks like an owner — proactive, reliable, and focused on long-term outcomes., • Leads with clarity and empathy — your team knows where they're going and feels supported., • Communicates across levels — from technician to senior leadership, you know how to align. #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills Pay: $110,000 – $130,000 per year Benefits: • 401(k), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • FSA, • HSA, • Paid Time Off, • Paid Holidays, • Profit Share, • Disability Insurance, • Life Insurance, • 8-hour shift

Job Description Electrical Consultants, Inc. (ECI) is a leading power engineering consultant firm that provides engineering, system planning and studies, technical consultation, project management, surveying, environmental planning, commissioning/testing and construction services to electric utilities, energy developers and industrials throughout the U.S. Our experience includes system voltages from 4.16 kV through 765 kV. ECI has an opening for a civil engineer. Technical focus will be on structural engineering and/or site (civil) design for substations and power delivery facilities. • Structural engineering responsibilities include development of design criteria, structure design, foundation design, building design, and related works. Structure design primarily consists of standard shape steel structure, specification of tubular steel structures, fire walls, and related facilities. Foundation design primarily consists of drilled pier, shallow/pad, and spread footing foundations. Civil Engineer should possess ability to learn and apply various software design packages such as Visual Analysis, STAAD.Pro, Risa, LPILE, MFAD, and CAISSON. Minimum Requirements: Bachelor of Science or Master's degree in Civil Engineering; excellent verbal and written communication skills; strong organization and planning skills; ability to work in a team environment; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules. A PE license is preferred depending on experience level. The successful applicant must be knowledgeable of applicable codes, standards and design tools. The successful applicant may be subject to client-mandated drug and background checking. Occasional travel/driving is required; therefore, the successful applicant will be subject to ECI's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include the following: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job DescriptionSalary: Why Should You Join AEIS? At AEIS, we believe in building real relationships, not just contracts. The work you do here isnt just about inspections its about craftsmanship, collaboration, and commitment to quality. And like any meaningful relationship, there needs to be a true fit between you and us in values, purpose, and expectations. This is where youll spend most of your working life. We want it to be worth it for you and for us. When the fit is right, our Inspectors grow into trainers, QA leads, and technical experts. If you're serious about quality and looking for more than just a job, we invite you to explore this opportunity. ABOUT THE ORGANIZATION: AEIS is a leading inspection services and materials testing company in the NY Metro area and proud to be an AWS Accredited Test Facility. With a 20,000 sq. ft. state-of-the-art metallurgy lab in South Plainfield, NJ, our team works at the intersection of construction, failure analysis, welding engineering, and NDT. We are looking for a Metallurgical Engineer for our laboratory in South Plainfield, NJ: Responsibilities: • Select, prepare, mount, and polish samples for analysis, • Capture high-quality images using light and scanning electron microscopes, • Perform advanced testing (EDS, tensile, radiography, etc.), • Maintain lab equipment and ensure accurate calibration, • Document findings in clear, concise reports, • Bachelors in Metallurgical Engineering or Materials Science, • 25 years of hands-on lab experience, • Skilled in sample prep, microscopy, and metallurgical testing, • Strong attention to detail and safety practices U.S. Citizenship required(as per work requirement) COMPENSATION: Compensation is commensurate with experience in a similar role and includes a comprehensive benefits package. This role is an exempt, full time salaried position. Work Location: South Plainfield, NJ Work Remotely No Job Type:Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Monday to Friday, • South Plainfield, NJ: Relocate before starting work (Required) Work Location:In person

Job DescriptionSalary: $63,000-$89,000 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for road and bridge inspections. Our ideal candidate will be a highly motivated & qualified individual, with experience in soil testing, quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects.In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and the New York Metro, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. This job requires travel to various job sites within 75 miles of Woodbridge, NJ. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations., • Inspection of testing of soils., • Maintain project records., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Record monitoring well data., • Enter data for Test calculations., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification, • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various job sites within 75 miles of Woodbridge, NJ. Who you are: * • Bachelors degree in Biological Engineering, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Geological Engineering, Materials Engineering, Metallurgy Engineering, Structural Engineering, or Transportation Engineering., • Familiar with ASTM, AASHTO and ACI standards for testing and inspections., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, • International Code Council (ICC) - Soil Inspector, • New Jersey DCA Certified, • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey and New York., • US Citizenship; Authorized to work in the United States., • 3+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with gINT software., • NICET I or II certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job Description Position Title: Data Engineer/Developer Reports to: VP, Technology Department: Development and Technology Location: Simplicity Summit Office; 86 Summit Ave, Summit, NJ 07901; In-office Classification: Full-time; Exempt Summary / Job Objective: As a data engineer/developer, you will be responsible for designing, building, and maintaining scalable data pipelines and infrastructure that are used for collecting, storing, processing, and analyzing large volumes of data. Essential Job Functions: Your role involves collaborating with business stakeholders, outside partners, other software developers, analysts, and other stakeholders to ensure data availability, reliability, and quality for decision-making and operational purposes. Primary Responsibilities: · Data Processing and Transformation: Implement data processing and transformation using state-of-the-art tools and processes. Build on top of existing capabilities and develop both custom features (e.g., Laravel/PHP, Python, or other frameworks) or enterprise software (e.g., Informatica, Mulesoft, or other tools). · Data Pipeline Development: Design, develop, and maintain robust, scalable data pipelines for ingesting, transforming, and loading structured and unstructured data from various sources into data storage systems. · Data Infrastructure: Manage and optimize data storage solutions, including databases, operational data stores, and data warehouses, to ensure high performance, reliability, and security. · Data Quality and Governance: Implement data quality checks, monitoring, and governance processes to ensure data accuracy, consistency, and compliance with regulatory requirements. · Performance Tuning: Identify and address performance bottlenecks in data pipelines and infrastructure through optimization, tuning, and capacity planning. · Collaboration: Work closely with data scientists, analysts, software engineers, and business stakeholders to understand data requirements, develop data solutions, and support analytical use cases. · Documentation: Document data pipelines, infrastructure configurations, and best practices for data engineering standards, ensuring knowledge sharing and team collaboration. Qualifications: · Hands-on experience with building data-focused processes in languages such as Laravel/PHP, Python, or other languages. · Knowledge and experience working in cloud platforms like AWS and/or Azure. · Experience working with complex data objects in various formats like JSON, XML and across different DB designs like MySQL, MS SQL, and Salesforce DB’s. · Bachelor's or Master's degree in Computer Science, Information Systems, Data Engineering, or related field. · Proven experience in data engineering, ETL (Extract, Transform, Load) processes, and data pipeline development. Additional Qualifications (Preferred): · Knowledge of or experience with Salesforce data models, API’s and high-level architecture. Experience with other CRM tools and their data is also a plus. · Experience with Business Intelligence tools such as Domo, Microsoft PowerBI, or other BI tools. · Agile development experience working with tools such as Atlassian Jira, Confluence, and Bitbucket. · Experience with financial services products such as insurance, wealth management, or related fields is a plus. · Certification or coursework in data engineering or related technologies. Core Competencies: · Excellent problem-solving skills, analytical thinking, and attention to detail. · Effective communication and teamwork abilities to collaborate across multidisciplinary teams. · Proven success working in both a team environment as well as independently. Compensation & Benefits: Compensation (based on experience) ● Base salary: $110,000 - $130,000 ● This is an exempt position ● Annual performance bonus target: 10% Benefits ● Employee benefits (medical, dental, vision, life insurance, other) ● 401k with employer match ● Paid Time Off ● Paid parking Location: Simplicity Summit Office; 86 Summit Ave, Summit, NJ 07901 *This role is an in-office position Company DescriptionHeadquartered in Summit, New Jersey, Simplicity Financial Marketing Group Holdings (“Simplicity Group”) is a financial holding company in the independent financial services sector that specializes in the distribution of retirement and financial planning solutions. Simplicity Group and its wholly-owned Broker-Dealer, partners with insurance and investment professionals to help provide consumers with guaranteed income and life insurance products, wealth accumulation strategies, disability, and long-term care protection in support of a holistic financial strategy. Through its vast distribution network of insurance, wealth, and institutional channels, Simplicity Group has assisted with the placement of more than $10 billion of insurance assets and has $10 billion of assets under management and advisement as of Q4 2024. Simplicity Group is a fast-growing business, focused on organic growth initiatives to help its distribution partners expand their businesses. Simplicity Group has over 1,100 employees and 70 operating subsidiaries. Simplicity Group is owned by two of the leading San Francisco-based financial and tech-enabled services private equity firms and by its operating Partners, who help drive the company’s day-to-day business. For more information, please visit simplicitygroup.com.Headquartered in Summit, New Jersey, Simplicity Financial Marketing Group Holdings (“Simplicity Group”) is a financial holding company in the independent financial services sector that specializes in the distribution of retirement and financial planning solutions. Simplicity Group and its wholly-owned Broker-Dealer, partners with insurance and investment professionals to help provide consumers with guaranteed income and life insurance products, wealth accumulation strategies, disability, and long-term care protection in support of a holistic financial strategy.\r\n\r\nThrough its vast distribution network of insurance, wealth, and institutional channels, Simplicity Group has assisted with the placement of more than $10 billion of insurance assets and has $10 billion of assets under management and advisement as of Q4 2024. Simplicity Group is a fast-growing business, focused on organic growth initiatives to help its distribution partners expand their businesses. Simplicity Group has over 1,100 employees and 70 operating subsidiaries. Simplicity Group is owned by two of the leading San Francisco-based financial and tech-enabled services private equity firms and by its operating Partners, who help drive the company’s day-to-day business.\r\n\r\nFor more information, please visit simplicitygroup.com.

Job Description POSITION: Control Systems Programmer REPORTS TO: VP of Technical Integration OBJECTIVE: Be a valuable member of Verrex and its Engineering Services Department in the overall Implementation of Verrex’s Mission, Vision and Strategy, enabling Verrex to continue to grow and expand its business. COMPENSATION: Salary, exempt (non-hourly), monthly cell phone stipend. BENEFITS: Verrex offers a comprehensive benefits package to support the health, well-being, and financial security of our employees. Benefits include: • Medical, dental, and vision insurance (VSP), • Company-sponsored 401(k) plan with matching contributions, • Company-paid life insurance and AD&D coverage ($50,000), • Long-term disability (LTD) insurance, • Optional supplemental life insurance available for purchase, • Healthcare and Dependent Care Flexible Spending Accounts (FSAs) RESPONSIBILITIES: Primary Responsibilities: • Develop preliminary touch panel screen shots for new clients, with direction from the project team and then the client, to establish an approved design for the client., • Develop complete and functional system touch panel files and programs, working from a client approved GUI and system wiring drawings., • Work together with the Verrex Quality Assurance Department to debug code and support system testing, working towards a completely functional system before shipping to the field., • Provide on-site and remote support to field technicians and engineers for system commissioning when required for all Verrex offices., • Provide operational manuals and quick reference guides for projects., • Archiving source code, GUI designs and related material for future modifications., • Work with the project engineer and account executive in determining the control system hardware requirements for specific projects., • Work with Sales to properly estimate programming services and hours., • Provide programming support for the Verrex GMS technicians and GMS clients including system upgrades/adjustments. General Responsibilities: • Be a technical resource for other departments as required., • Conduct equipment research and testing on new and existing technology., • Interface with manufacturers when dealing with equipment problems., • Conduct programming and troubleshooting training for field techs, project engineers and others as requested., • Attend department meetings., • Attend manufacturer and industry training in-house, off premises, and online. Requirements: • Crestron certified programmer, • Extron Authorized Programmer, • 5+ years Commercial AV experience, • Strong troubleshooting, ability to logically assess flow of control/data/communication, debug, • Strong understanding of IP communications/Networking Nice To Have:, • C# (SIMPL #), • HTML5, graphical user interface development experience, • CTS This job description may be revised at any given time by Verrex Management. Employee Handbook Please refer to the Verrex Employee Handbook for company policies on such issues as employment wages, salary, benefits, services, reimbursable expenses, employee communications, safety, health, standards of conduct, and corrective action. Equal Opportunity Employer Statement Verrex is proud to be an equal opportunity employer. We are committed to creating an inclusive, respectful workplace where everyone can thrive.

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks an Electrical Engineer to join our dynamic team. This position is available for an immediate start and offers an excellent growth opportunity for a candidate eager to contribute their expertise and drive impactful results. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days. · Utilize advanced software tools like AutoCAD and Autodesk Inventor to create detailed electrical schematics and control diagrams for switchgear systems. · Develop comprehensive electrical schematics, wiring diagrams, and control diagrams to support production and streamline the manufacturing process. · Collaborate with engineering, production, and quality teams to ensure that designs meet specifications and are optimized for manufacturability and reliability. · Participate in the selection and specification of switchgear components, including circuit breakers, contactors, transformers, and other electrical components, to ensure optimal performance and compliance with relevant standards. · Prepare detailed bills of materials (BOM) and wiring diagrams, ensuring accuracy and completeness to facilitate the manufacturing process. · Work closely with mechanical engineers, technicians, and other team members to integrate electrical systems with mechanical components for cohesive functionality. · Troubleshoot and resolve design and manufacturing issues in collaboration with cross-functional teams. · Stay current with industry standards, best practices, and emerging technologies in switchgear design and manufacturing, ensuring designs comply with ANSI, UL, and National Electrical Code (NEC) standards. · Maintain accurate documentation of design processes, updates, and revisions. Conduct thorough reviews and quality checks on designs to ensure precision and adherence to standards. Requirements: Skills, Requirements, and Specifications · Minimum of 3+ years’ experience in the electrical distribution industry, including electrical switchgear experience. · Familiarity with major brands in the industry (Schneider, ABB, Eaton) · Proficient in AutoCAD and Autodesk Inventor for electrical schematics and design. · Demonstrated ability to work effectively as part of a team in a fast-paced environment. · Strong interpersonal skills to facilitate collaboration and problem-solving. · Exceptional attention to detail, ensuring accuracy and quality in design work. · Solid understanding of ANSI and UL standards relevant to switchgear. Education: Bachelor or Masters Electrical Engineering Degree

Job Description Ranked the overall #5 Best Civil Engineering Firm to Work for in the Nation and residing on the list of the Engineering News Record (ENR)’s Top 500 Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has 3-5 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities may include, but are not limited to: • Preparation of trip generation estimates, roadway volume development, parking estimates, and analyses for their projects within the team., • Assisting in the analysis of field data, reports, maps, drawings, blueprints, tests, and aerial photographs to plan projects., • Obtaining, analyzing, and interpreting demographic and other regional transportation planning data., • Use of computer-assisted engineering and design software and equipment to prepare engineering and planning documents., • Assisting in the preparation or modification of planning documents, including transportation impact studies, and traffic operational analyses, for projects., • Assisting in the collection of field data., • Serving as onsite project representative., • Use of planning software and equipment to prepare engineering, design, and planning documents., • Responsible for job-specific quality system tasks as defined in the quality manual or handbook., • Responsible for other general office duties as may be assigned. Job Requirements: • Bachelor’s Degree in Engineering, • Engineer in Training Certification Preferred, • Experience utilizing any or all of the following: Synchro, SimTraffic, Excel, AutoCAD/MicroStation (preferred but not required), • Aptitude for detail-oriented work assignments, • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description Are you ready to shape the future of authentication? Join 1Kosmos and help lead the next wave in identity assurance and passwordless innovation. 1Kosmos is driving the future of identity security, empowering organizations to eliminate passwords and establish trust at every step of the identity lifecycle. As a vibrant team of innovators, we develop advanced authentication solutions trusted by some of the world’s leading brands. Join us as we create a passwordless world and set new standards for digital identity assurance. We are looking for an AI / Machine Learning Engineer to design, build, and deploy advanced computer vision and AI solutions. You will work on projects involving image capture, data extraction, and fraud detection, delivering high-performance models that can run on both mobile devices and cloud environments. This role blends R&D with production engineering—you’ll take ownership of the full ML lifecycle, from dataset creation and model training to deployment and performance optimization. Key Responsibilities • Design and implement AI models for image classification, object detection, OCR, and feature extraction., • Develop real-time image quality assessment and capture guidance algorithms., • Create and maintain data pipelines for collecting, cleaning, augmenting, and labeling datasets., • Implement model optimization techniques for mobile (on-device) and cloud inference., • Apply fraud detection methods to identify tampering, forgeries, or replay attacks in visual data., • Integrate ML models into production-grade APIs and mobile SDKs., • Monitor, evaluate, and continuously improve model accuracy and performance., • Collaborate with product and engineering teams to align AI capabilities with business goals. Requirements • Bachelor’s or Master’s degree in Computer Science, AI/ML, or related field (or equivalent experience)., • 3+ years of experience building and deploying ML models in production., • Proficiency in Python and ML frameworks (PyTorch, TensorFlow, or similar)., • Experience with computer vision libraries (e.g., OpenCV) and OCR technologies., • Strong understanding of deep learning architectures for image and text recognition., • Familiarity with cloud platforms (AWS, GCP, or Azure) and API development., • Strong problem-solving skills and ability to work in fast-paced environments., • Based in the NJ / NY area; Hybrid working model.Preferred Qualifications, • Experience with model quantization and optimization for mobile deployment., • Knowledge of synthetic data generation and data augmentation techniques., • Background in security, liveness detection, or anomaly detection., • Exposure to compliance and data privacy regulations (GDPR, CCPA)., • Cutting-Edge Tech Stack: Build with decentralized identity protocols, FedRamp High, FIDO2-certified cryptography, and NIST-compliant biometric systems., • Accelerated Growth: Receive annual stipends for certifications and attend key conferences like Identiverse or EIC., • Ownership & Impact: We move fast and will enable you to make a big impact with large customers in US & Canada., • Flexibility First: Unlimited PTO, and 2 days WFH

American energy independence with positively ingenious solutions that transform how the world stores power.

We are seeking an innovative and highly motivated Computer System Validation (CSV) Engineer who will be part of Cellares' Quality group and contribute significantly to the development of our advanced cell therapy manufacturing platform. Software Quality Engineering and/or Computer System Validation

Software Development Engineer, Advisor II. As a Software Development Engineering - Advisor II, you will play a critical role in designing, developing, and maintaining high-quality software applications. Bachelor's degree in computer science, engineering, or a related field, or an equivalent combinat

The senior process engineer is expected to support the director of process engineering to manage and lead process engineers to support day to day production, to ensure and improve compliance with quality standards and safety regulations. Provide leadership and technical support to engineers to drive