Radiation jobs in Long Beach, CaliforniaCreate job alerts

Job DescriptionOverview Ansible Government Solutions, LLC (Ansible) is currently recruiting a part time Radiation Therapy Technologist to provide onsite services to eligible beneficiaries of the Tibor Rubin VA Medical Center located at 5901 E. 7th St. Long Beach, CA 90822. The clinic hours are typically Monday-Friday, 7:30am-4pm. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Operate linear accelerators and other radiation therapy equipment to deliver prescribed radiation treatments to patients., • Prepare imaging, simulation, treatment, and ancillary equipment for patient use., • Position patients accurately for treatment, using immobilization devices as necessary., • Explain procedures to patients, ensuring their comfort and cooperation throughout the treatment process., • Observe and monitor patients during treatments for reactions and safety concerns., • Maintain accurate treatment records, including daily treatment notes in the Computerized Patient Record System (CPRS)., • Perform daily quality assurance checks on radiation therapy equipment., • Assist in CT simulation procedures, including acquiring specific data sets as prescribed by physicists or physicians., • Construct accurate contours of patients' bodies and perform necessary measurements for treatment planning., • Operate simulator equipment and take high-quality radiographs to accurately localize tumor volumes., • Limit radiation fields using lead cut-outs or multi-leaf collimation (MLC)., • Assist Radiation Oncologists with bolus design according to physician's direction., • Maintain and update patient treatment charts and records., • Adhere to all radiation safety guidelines, policies, and procedures., • Participate in quality improvement activities and continuing education., • Collaborate effectively with the multidisciplinary radiation oncology team.Qualifications, • Associate's degree or certificate from an accredited Radiation Therapy Technology program., • Current certification by the American Registry of Radiologic Technologists (ARRT) in Radiation Therapy., • Current BLS (Basic Life Support) certification., • Minimum of 1 year experience in radiation therapy, preferably in a hospital or clinical setting., • Knowledge of radiation safety principles and practices., • Experience with:, • Varian Linear Accelerators (TrueBeam or similar)., • CT simulation., • Various treatment techniques including 3D-CRT, IMRT, and IGRT., • ARIA record and verify system or similar oncology information systems., • Strong understanding of human anatomy, physiology, and medical terminology., • Excellent patient care skills and bedside manner., • Ability to work effectively in a team environment., • Strong attention to detail and commitment to accuracy., • Good physical stamina to stand for extended periods and assist in patient positioning., • Excellent communication skills, both verbal and written., • Ability to pass a government background check and complete required VA training. All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR wGZJCr43mX

Job Description Saratoga Medical is looking for a part-time Radiation Therapist Technologist for Tibor Rubin VA Medical Center in Long Beach, California. Required Qualifications • Certified by ARRT in Radiation Therapy, • BLS certification (AHA or Red Cross equivalent)., • One year of experience in 3-D-CRT, IMRT, IGRT, and dose calculations Saratoga Medical Center, Inc. is an equal opportunity employer and will not discriminate in recruiting, hiring, training, promotion, transfer, discharge, compensation or any other term or condition of employment on the basis of race, religion, color, age (over age 39), sex, national origin, or on the basis of disability if the employee can perform the essential functions of the job, with a reasonable accommodation if necessary.

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for a Cardiac Catheterization Laboratory and Vascular/Interventional Radiologic (IR) Technologist to support the Long Beach VA Health Care System located at 5901 E 7th St, Long Beach, CA 90822. The technologist will participate and assist the cardiologist in Catheterization Laboratory. This includes but is not limited to operating the C-arm and supporting the cardiologist in the Catheterization Laboratory suite. This is a full-time, long-term opening with terrific compensation and benefits. The selected candidate(s) will perform highly specialized exams. This revolves around complex interventional procedures (IR), which includes but is not limited to vascular angiography (IR) examinations. The technologist must also be able to manage the workstations for the Picture, Archive, and Communication System (PACS). Services will be provided Monday-Friday, 7:30am-4:30pm with minimal overtime. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Responsible for coordinating ordering all Cath Lab specific supplies with Logistics and Prosthetics including catheters, balloons, stents, sheaths, etc., • Coordinate all communication with vendors and schedule their visits, • Scrub, circulate, monitor, and operate equipment on the most complex examination and treatment procedures including intra-aortic balloon pump therapy for critical ill patients, • They assure medications are properly labeled and available for physician administration, • They have a functional knowledge of the cardiac medications use, appropriate doses, and side effects, • They assist with training and mentoring other technicians, nurses, nursing students, and cardiology fellows, • They assist the cardiology manager with quality control and performance improvement activities, • They work with physician to complete both diagnostic and interventional invasive cardiac procedures including: LHC, RHC, PTCAs, Stent placement, IABP, IVUS, OCT, pressure wires, percardiocentesis, temporary pacemakers, radial artery procedures, peripheral procedures, permanent pacemaker placement and AICD placement, • Monitors the progression of procedures requiring independent judgment and anticipate need to provide specific instrument and/or catheters, • The Cardiac Cath Lab Technician has the intimate knowledge of vascular and coronary anatomy and physiology related to cardiovascular function, • The technologist serves as scrub assistant to the Cardiologist for device implantation including pacemaker and defibrillators and is knowledgeable of sterile technique, surgical tools, and techniques of electrocautery and suturing., • Assist in fluoroscopy with the internal and external placement of cardiac pacemaker, • The technologist must be familiar with a wide variety of computerized equipment. This includes angiographic (IR), digital fluoroscopy, PACS viewing stations, and hospital computer systems such as VISTA and CPRS, • Ability to scrub, circulate, and monitor advanced procedures (including electrophysiological) to include intravascular ultrasound, OCT, FFR, Acists device, Angiojet, filter wires, permanent pacemaker insertions and AICD insertions, • Knowledge and understanding of waveforms from the great vessels and all chambers of the heart including the ability to recognize and distinguish normal from abnormal, artifact from abnormality, and forewarn the physician of an impending life-threatening situation, • Knowledge of the more complex examination and treatment procedure and techniques in order to provide training and supervision in these procedures, to evaluate and initiate performance improvement projects, and to write policies, procedures, and protocols that pertain to the Cardiac Cath Lab Qualifications • Licensed in a State, Territory, or Commonwealth of the United States or the District of Columbia, • Certified in general radiologic technology by the American Registry of Radiologic Technology (ARRT) (R), • American Heart Association (AHA) Basic Life Support (BLS) certification, • Knowledge of the concepts and practices of Catheterization Laboratory and vascular-interventional modality, including balloon angioplasty, stenting, intra-aortic balloon pumps, pacemakers/defibrillator implantation, • Knowledge in teaching/instructing procedures in the interventional lab, • Ability to communicate with staff and cardiologists, • Knowledge of radiation protection standards, minimum radiographic exposure techniques and employing lead shielding when performing standard or fluoroscopic procedures, • Knowledge of instructional techniques to educate newly hired or promoted technologists or radiology residents of the function of the exams, • No sponsorship available Pay Range: $43.43 - $69.43 hourly All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR DPaUOxnhhc

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As an RF Engineer on Relativity's Interplanetary Program, you will own the architecture, design, development, testing, and operation of next-generation high-reliability RF systems that enable deep-space communication, navigation, and science operations. You will work hands-on across the full lifecycle, from concept and link budgets, to working with ground stations (i.e. DSN, KSAT, etc.) through hardware bring-up, environmental qualification, integrated testing, and flight readiness. This role partners tightly with avionics, optical comms, and spacecraft REs to ensure our RF subsystem integrates cleanly into the overall spacecraft bus. You will be responsible for solving engineering challenges that push the boundaries of RF technologies: designing for extreme distances measuring in AUs, low-SNR environments, radiation effects, and highly constrained mass/power budgets. This is a highly technical, hardware-first role in a scrappy, hands-on environment and team where iteration speed, analytical rigor, and end-to-end ownership of the problem space will be critical to the success of the mission. About You: • Bachelor's degree in Electrical Engineering, Computer Engineering, Physics, or a related field, • 5+ years of experience in RF communication system architecture, analysis, and/or component engineering, • Experience with 3 or more of the following:, • RF architecture & link budgets for challenging environments, • Selection, design, and/or integration of RF systems including transmitters, receivers, LNAs, PAs, frequency sources, converters, and front-end architecture., • Selection and/or design of RF passive components such as filters, diplexers, couplers, and waveguide components, • Antenna design, analysis, and modeling tools, • Hands-on testing with RF lab equipment such as spectrum analyzers, VNAs, SDRs, power meters and data recorders, • Hands-on integrated testing with ground stations and/or integrated spacecraft RF systems to flow live telemetry and commanding, • Experience communicating deeply technical topics with individuals from different disciplines Nice to haves but not required: • Experience with space environments (radiation effects, thermal extremes, vacuum operation, component derating), • Prior work with deep-space spacecraft comms system design & architecture, • Prior work with deep-space ground station networks, • Experience with high-gain antennas, phased arrays, or gimbaled antenna systems, • Experience designing or validating RF hardware for flight qualification (TVAC, vibe, EMI/EMC) At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$159,000—$204,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: You'll own the compute hardware from architecture through bring up — there's no hand-off to another team mid-stream. You pick the components, you design the board, you're the one powering it on and debugging it with the software team • Design the compute boards that deliver ≥10 TFLOPS of processing power for onboard AI/ML inference and science data processing within the Relay Data Center, owning the hardware from schematic capture through board-level validation, • Architect and implement power delivery networks for high-complexity carrier boards, including 500W+ multi-rail designs with tight sequencing integrating GPU or CPU compute modules onto custom PCBs with high-speed coherent interconnects, • Define thermal interface requirements (power dissipation budgets, junction temperature limits, interface material selection) and hand off specifications to the mechanical team, who own the thermal and packaging solution, • Design and validate high-speed memory interfaces (HBM, DDR5), PCIe Gen 4/5 chip-to-chip links, and 10 GbE+ Ethernet connections to the payload network, along with board-level power monitoring, current limiting, and radiation upset recovery circuitry, • Lead hardware bringup and board-level validation. Diagnose and resolve issues hands-on while collaborating closely with the software engineers who are building the software environment on top of your hardware About You: • BSEE with 5+ years designing and bringing up high-speed digital compute boards, ideally with direct exposure to GPU, HPC, or modern accelerator platforms, • Proficient in high-speed digital PCB design principles: multi-GHz signaling, dense BGA escape routing on high layer count stackups, and signal integrity analysis through both simulation and measurement, • Strong command of power integrity and power delivery network design, including multi-rail architectures, power management IC selection, voltage sequencing, and board-level current limiting, • Strong working experience with high-speed serial interface design, analysis and debug, particularly PCIe Gen 4/5 topology, configuration, and Ethernet Nice to haves but not required: • Experience writing basic firmware for hardware bring up and validation, • Hands-on embedded systems debug skills that let you move between careful pre-fab analysis and fast, practical problem-solving on the bench, • Experience with COTS hardware for space applications, including radiation awareness, component derating, and upset mitigation techniques (ECC memory scrubbing, watchdog/reset architectures), • Hands-on experience with physical PCB layout, particularly for complex, high-layer-count boards with dense BGA packages, • Familiarity with thermal management at the board and system level, including junction temperature modeling, thermal interface material selection, and collaborating with mechanical engineers on packaging solutions for high-TDP modules At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$175,000—$263,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description Meridian is building a fundamentally new model for sovereign space infrastructure—delivering complete, owned Low Earth Orbit (LEO) satellite constellations that provide governments and commercial operators with full control, assured access, and sovereign communications capability at a fraction of the cost of developing these systems independently. Backed by leading venture capital investors and engineering partners, we are rapidly scaling the design, production, and deployment of the satellites, ground systems, and network infrastructure that will power Meridian's next-generation constellations. Joining Meridian means working at the forefront of one of the world's most ambitious space programs underway today - designing and building constellations that will put sovereign connectivity within reach of nations and operators worldwide. You'll be part of a close-knit, collaborative team that thrives in a fast-paced, innovative environment, where your work directly advances the design, development, and deployment of satellite constellations that governments and enterprises around the world will depend on for secure, resilient, and sovereign connectivity. Your Mission on the Team: You are responsible for the design and development of the analog RF systems and supporting avionics in the satellite communication payloads of Meridian Space constellation. That includes: • Transponder RF chains (Amplifiers, filters, mixers), • Means of controlling transponder functions, • Transponder power supply avionics, • Radio-to-antenna interface design Basic Qualifications: • Graduate degree in Electrical Engineering or related field, • Minimum of 5 years of experience designing analog RF systems, with hands-on circuit design and board layout using industry-standard EDA tools, • Experience designing RF signal chains incorporating amplifiers, filters, and mixers, using circuit simulation tools such as ADS or Microwave Office, • Experience designing power supply avionics for RF or analog payloads, • Ability to perform bench-level RF and analog bring-up and troubleshooting using spectrum analyzers, network analyzers, signal generators, and other RF test equipment, • Strong verbal and written communication skills Preferred Qualifications: • Experience designing transponders or transponder-like RF chains for satellite communication payloads, • Experience with radio-to-antenna interface design and passive RF/microwave components (waveguides, diplexers, couplers, filters), including 3D EM simulation in HFSS, CST, or similar, • Experience designing, manufacturing, and testing space flight hardware, including managing radiation effects (TID, SEE mitigation, part selection), • General electrical hardware design experience across power, DC, and digital domains, • Experience with antenna range or anechoic chamber testing and RF component characterization, • Expertise in automating RF test equipment and reducing measurement data using Python, MATLAB, or similar tools ITAR Requirements Meridian is required by the U.S. Government to comply with various space technology export regulations including the International Traffic in Arms Regulations (ITAR). All applicants must be a U.S. citizen, lawful permanent resident (“green card holder”) or a protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State. More information on ITAR can be found here. Meridian is committed to creating a diverse environment and is proud to be an equal opportunity employer. Each individual has the right to work in a professional environment that promotes equal employment opportunity and prohibits discriminatory practices, including harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for the full lifecycle of Terran R's nervous system, designing, building, testing, installing, and operating the hardware that connects and controls every major electrical system on the vehicle and ground. The team leverages close partnership between avionics design, manufacturing, and test to enable rapid iteration and feedback loops. Engineers are deeply embedded into other functions within Relativity, working closely with propulsion, GNC, fluids, and stage engineering teams to ensure seamless integration and operation. Now is a unique time to join: you'll get to help shape Terran R's fundamental avionics architecture and be given a high degree of ownership on components that will fly. About the Role: As the Director of Avionics Hardware Development, you will lead the ground-up development of cutting edge electronics and mechanical hardware for Relativity's newest launch vehicle, Terran R. You will lead a team of engineers and managers pushing the limits of new technologies supporting of a highly reliable system that must survive the harsh environments of spaceflight. You will lead the teams designing and developing the full set of avionics hardware including: • Electronics Hardware: PCBA design including power electronics, digital electronics, mixed signal electronics, and RF design, • Mechanical Hardware: enclosures, trays, isolators, brackets, and thermal management systems, • Integration: harnessing, vehicle-level packaging, system bring-up You will lead a team of engineers and engineering managers across multiple disciplines to advance avionics hardware through the full product lifecycle including requirements and system architecture definition, detailed design, development testing, introduction into manufacturing, and integrated test & operations. You will work closely with partner teams across the engineering, manufacturing, test, and operations organizations to develop a cohesive avionics system supporting all flight systems. To be successful in the role you must be comfortable working as a technical leader driving a fast-paced development program where your strategy and decision making are key to our program success. As a leader of leaders, you will also be expected to develop the skills of leaders under you. About You: • Bachelors degree in electrical engineering, mechanical engineering, aerospace engineering, or a related field, • 10+ years of experience developing electrical and mechanical hardware for mission-critical applications in harsh environments such as aviation, space, or robotics, • 7+ years of experience leading engineering teams, • Experience leading and developing engineering leaders, • Familiarity with driving hardware development through the full product lifecycle including design, manufacturing, test, and operations Nice to haves but not required: • Experience with electrical CAD tools such as Altium and mechanical CAD tools such as NX, • Experience with embedded software development, • Experience with environmental test equipment such as thermal chambers, shaker tables, and TVAC chambers, • Experience with design and test for EMC and radiation effects, • Familiarity with electrical, mechanical, and thermal analysis techniques and tools At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$245,000—$367,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As a Staff Avionics Mechanical Engineer, you will own the design, development, and delivery of all mechanical hardware supporting our next-generation space science avionics platforms. This includes enclosures, mounting structures, thermal accommodations, and interfaces to spacecraft systems. You will be responsible for ensuring the delivered Avionics can survive launch and space environments, and for solving complex thermal and structural challenges in tight, mass-efficient packaging. This is a hands-on role for a self-driven engineer who thrives in a fast-paced, prototype-heavy environment. You'll work from first principles to rapidly iterate on designs, perform analysis and testing, and lead the delivery of flight-ready avionics mechanical systems. About You: • Bachelor's or Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field, • 7+ years of experience in mechanical design, packaging, or thermal management for aerospace or ruggedized electronic systems, • Proven ability to deliver mechanical systems from concept through qualification and flight, • Proficiency with CAD (SolidWorks, NX, or equivalent) and analysis tools for structural and thermal performance, • Hands-on experience building, testing, and debugging hardware in a lab environment, • Strong communication skills and comfort working cross-functionally in a fast-paced, rapidly iterating team environment Nice to haves but not required: • Familiarity with NASA or other spaceflight structural verification standards, environmental testing and qualification, • Experience designing mechanical systems for spaceflight avionics or payloads, • Experience with high-density electronics cooling (conduction, heat pipes, cold plates), • Knowledge of materials and processes for vacuum and radiation environments At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$150,000—$226,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR RF SYSTEMS ENGINEER - MISSION FORMULATION (SECRET CLEARANCE) Based out of Rocket Lab's global headquarters in Long Beach, CA, the Senior RF Systems Engineer is responsible for leading the formulation and development of advanced RF payload systems for next-generation satellite platforms. Supporting capture of new civil, national security, and commercial business, you will drive technical innovation in communications, radar, and other RF sensing applications with emphasis on resilient space architectures. You will manage payload requirements definition, performance analysis, technical budgets, and systems engineering processes for RF-centric missions. (Please note: this position can be hired at the Senior RF Engineer I or Senior RF Engineer II level) WHAT YOU'LL GET TO DO: • Lead RF payload engineering formulation supporting business development and new opportunity capture across communications, radar, and other sensing missions, • Develop and maintain:, • RF link budgets and performance analyses (uplink/downlink, radar equation, interference), • Payload requirements and verification strategies, • Simulations and analysis for RF system performance (antenna patterns, coverage, data rates, detection ranges), • Payload integration and test methods, • Drive technical development of advanced payload concepts including but not limited to:, • Radar systems (MTI, SAR, change detection), • 5G Non-Terrestrial Networks (NTN), broadband, and tactical communications systems, • Passive RF sensing and signals intelligence, • Resilient and disaggregated payload architectures, • Lead payload-to-bus interface definition and coordination with spacecraft subsystems (power, thermal, ADCS, C&DH), • Develop, in collaboration with payload suppliers and team members, interface specifications, CONOPS definition, and technical design documents, • Assist with program and product management for payload-focused programs YOU'LL BRING THESE QUALIFICATIONS AS SENIOR RF ENGINEER I: • Bachelor's degree in electrical engineering, aerospace engineering, or other technical discipline, • 5+ years of experience in aerospace or defense RF systems, • Experience supporting satellite payload development, space-based radar, or satellite communications systems, • Active Secret clearance with TS/SCI eligibility YOU'LL BRING THESE QUALIFICATIONS AS SENIOR RF ENGINEER II: • Bachelor's degree in electrical engineering, aerospace engineering, or other technical discipline, • 8+ years of experience in aerospace or defense RF systems, • Experience supporting satellite payload development, space-based radar, or satellite communications systems, • Active Secret clearance with TS/SCI eligibility THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD in electrical engineering, aerospace engineering, or related discipline with focus on RF/microwave systems, electromagnetics, or radar, • Active TS/SCI clearance, • Deep understanding of RF payload subsystems including:, • Phased array and reflector antenna design, • RF front-end architectures (LNAs, filters, diplexers, amplifiers), • Transmit/receive modules and beamforming, • Digital signal processing for radar and communications, • Frequency planning and spectrum management, • Experience with radar processing techniques (SAR, MTI, STAP) and performance modeling, • Knowledge of 5G NTN standards, waveforms, and regulatory environment, • Knowledge of tactical communication systems and other protected communication standards, waveforms, and regulatory environment, • Understanding of passive RF collection and geolocation techniques, • Familiarity with radiation effects on RF electronics and mitigation strategies, • Experience with electronic protection and resilient RF architectures including:, • anti-jam/anti-spoof techniques, • frequency/beam agility, • software-defined systems for mission flexibility, • and payload hardening for contested/degraded environments, • Proficiency with RF analysis tools (STK, MATLAB, Python, HFSS, CST), • Understanding of spacecraft bus subsystems and their impact on payload performance (power, thermal, pointing, EMI/EMC), • Experience with payload integration, test, and calibration, • Knowledge of orbital mechanics and mission design for RF missions, • Highly effective technical communication skills with customers, payload suppliers, and internal teams This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$120,000—$210,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As a Senior Avionics Hardware Engineer within the Interplanetary Program at Relativity Space, you will take ownership of the design, development, and delivery of spacecraft avionics systems from concept through flight. You will collaborate with multidisciplinary teams to create reliable, high-performance avionics that enable deep-space exploration. This position requires a highly motivated engineer who thrives in a fast-paced environment and can execute with autonomy. You will help define the foundation of Relativity's future interplanetary avionics architecture while setting the technical standards for future team growth. Essential Duties and Responsibilities: • Develop complete avionics systems, including architecture, design, integration, and verification, from initial concept through flight-qualified hardware, • Collaborate with propulsion, guidance and control, thermal and software teams to ensure seamless integration and performance of avionics systems, • Implement robust design and test processes that ensure reliability and safety for deep-space missions, • Lead the technical execution of avionics hardware builds, including PCB design, harnessing, embedded systems, and environmental qualification, • Coordinate with suppliers and internal stakeholders to manage component selection, testing, and delivery schedules, • Maintain accurate design documentation, test plans, and reports, demonstrating strong communication and organizational skills About You: • Bachelor's or Master's degree in Aerospace Engineering, Electrical Engineering, or a related technical field, • 5+ years of experience designing, developing, and delivering avionics or electronics for aerospace systems or similarly complex environments, • Demonstrated ability to take a design from concept through production with minimal supervision, • Hands-on experience with schematic capture, PCB layout, embedded software interfaces, and system-level testing, • Proven track record of working cross-functionally and communicating technical information clearly to diverse audiences, • Ability to work effectively in a collaborative, fast-paced team environment, demonstrating adaptability and problem-solving skills Nice to haves but not required: • Direct technical experience in Mars missions is a plus, • Experience with NASA aerospace systems engineering practices in an applied / new-space manner is a plus, • Experience with deep-space or high-radiation avionics systems, • Background in spaceflight hardware environmental testing and qualification At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$148,000—$222,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR ELECTRICAL ENGINEER II Based at Rocket Lab's global headquarters in Long Beach, CA, the Senior Electrical Engineer II will participate in the development and test of avionics hardware for our spacecraft programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of electrical hardware development, from requirements definition through design, prototyping, fabrication, testing, and production. As an engineer on the spacecraft development team, you will have frequent opportunities to test and operate your systems on-orbit. We're looking for people who are passionate about spacecraft electrical hardware design, with a willingness to learn in a fast-paced environment. WHAT YOU'LL GET TO DO: • Develop PCBA requirements in collaboration with other engineering disciplines, • Schematic capture and PCB layout using Altium Designer, • Circuit analysis, including power, tolerance, and reliability related, • PCBA design verification testing and system integration testing, • Production manufacturing support as needed YOU'LL BRING THESE QUALIFICATIONS AS SENIOR ELECTRICAL ENGINEER II: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • 8+ years of electrical hardware design experience, including schematic capture and PCB layout, • A strong background in analog electronics design, • Proficiency performing circuit analyses in SPICE and Excel, • Proficiency with Altium Designer for schematic capture and layout of complex PCBs, • Knowledge with processors, FPGAs, switch mode power supplies, communication interfaces and analog instrumentation, • U.S. citizenship required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD in electrical or computer engineering; or other engineering discipline, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering irons, etc., • Experience designing for space environments, including radiation impacts and mitigation, • Experience designing for high-reliability aerospace applications, • Experience designing rigid-flex PCBs and electromechanical design familiarity in general, • Experience with FPGA design and embedded software development for ARM core processors, • Demonstrated success working in a dynamic environment and ability to manage competing priorities This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$145,000—$210,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR ELECTRICAL ENGINEER II Based at Rocket Lab's global headquarters in Long Beach, CA, the Senior Electrical Engineer II will participate in the development and test of avionics hardware for our spacecraft programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of electrical hardware development, from requirements definition through design, prototyping, fabrication, testing, and production. As an engineer on the spacecraft development team, you will have frequent opportunities to test and operate your systems on-orbit. We're looking for people who are passionate about spacecraft electrical hardware design, with a willingness to learn in a fast-paced environment. WHAT YOU'LL GET TO DO: • Develop PCBA requirements in collaboration with other engineering disciplines, • Schematic capture and PCB layout using Altium Designer, • Circuit analysis, including power, tolerance, and reliability related, • PCBA design verification testing and system integration testing, • Production manufacturing support as needed YOU'LL BRING THESE QUALIFICATIONS AS SENIOR ELECTRICAL ENGINEER II: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • 8+ years of electrical hardware design experience, including schematic capture and PCB layout, • A strong background in analog electronics design, • Proficiency performing circuit analyses in SPICE and Excel, • Proficiency with Altium Designer for schematic capture and layout of complex PCBs, • Knowledge with processors, FPGAs, switch mode power supplies, communication interfaces and analog instrumentation, • Active Secret Clearance with ability to obtain a TS/SCI THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD in electrical or computer engineering; or other engineering discipline, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering irons, etc., • Experience designing for space environments, including radiation impacts and mitigation, • Experience designing for high-reliability aerospace applications, • Experience designing rigid-flex PCBs and electromechanical design familiarity in general, • Experience with FPGA design and embedded software development for ARM core processors, • Demonstrated success working in a dynamic environment and ability to manage competing priorities This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$145,000—$210,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As a Senior Avionics Mechanical Engineer, you will own the design, development, and delivery of all mechanical hardware supporting our next-generation space science avionics platforms. This includes enclosures, mounting structures, thermal accommodations, and interfaces to spacecraft systems. You will be responsible for ensuring the delivered Avionics can survive launch and space environments, and for solving complex thermal and structural challenges in tight, mass-efficient packaging. This is a hands-on role for a self-driven engineer who thrives in a fast-paced, prototype-heavy environment. You'll work from first principles to rapidly iterate on designs, perform analysis and testing, and lead the delivery of flight-ready avionics mechanical systems. About You: • Bachelor's or Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field, • 5+ years of experience in mechanical design, packaging, or thermal management for aerospace or ruggedized electronic systems, • Proven ability to deliver mechanical systems from concept through qualification and flight, • Proficiency with CAD (SolidWorks, NX, or equivalent) and analysis tools for structural and thermal performance, • Hands-on experience building, testing, and debugging hardware in a lab environment, • Strong communication skills and comfort working cross-functionally in a fast-paced, rapidly iterating team environment Nice to haves but not required: • Familiarity with NASA or other spaceflight structural verification standards, environmental testing and qualification, • Experience designing mechanical systems for spaceflight avionics or payloads, • Experience with high-density electronics cooling (conduction, heat pipes, cold plates), • Knowledge of materials and processes for vacuum and radiation environments At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$129,000—$193,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As a Staff Avionics Hardware Engineer within the Interplanetary Program at Relativity Space, you will take ownership of the design, development, and delivery of spacecraft avionics systems from concept through flight. You will collaborate with multidisciplinary teams to create reliable, high-performance avionics that enable deep-space exploration. This position requires a highly motivated engineer who thrives in a fast-paced environment and can execute with autonomy. You will help define the foundation of Relativity's future interplanetary avionics architecture while setting the technical standards for future team growth. Essential Duties and Responsibilities: • Develop complete avionics systems, including architecture, design, integration, and verification, from initial concept through flight-qualified hardware, • Collaborate with propulsion, guidance and control, thermal and software teams to ensure seamless integration and performance of avionics systems, • Implement robust design and test processes that ensure reliability and safety for deep-space missions, • Lead the technical execution of avionics hardware builds, including PCB design, harnessing, embedded systems, and environmental qualification, • Coordinate with suppliers and internal stakeholders to manage component selection, testing, and delivery schedules, • Maintain accurate design documentation, test plans, and reports, demonstrating strong communication and organizational skills About You: • Bachelor's or Master's degree in Aerospace Engineering, Electrical Engineering, or a related technical field, • 7+ years of experience designing, developing, and delivering avionics or electronics for aerospace systems or similarly complex environments, • Demonstrated ability to take a design from concept through production with minimal supervision, • Hands-on experience with schematic capture, PCB layout, embedded software interfaces, and system-level testing, • Proven track record of working cross-functionally and communicating technical information clearly to diverse audiences, • Ability to work effectively in a collaborative, fast-paced team environment, demonstrating adaptability and problem-solving skills Nice to haves but not required: • Direct technical experience in Mars missions is a plus, • Experience with NASA aerospace systems engineering practices in an applied / new-space manner is a plus, • Experience with deep-space or high-radiation avionics systems, • Background in spaceflight hardware environmental testing and qualification At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$175,000—$263,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As a Senior Optical Communications Engineer within the Interplanetary Sciences Program, you will own the end-to-end architecture, design, development, and delivery of a deep-space optical communications terminal. You will be responsible for translating mission needs into system performance requirements, developing architectures, and driving implementation through in-house design or external partnerships. This role offers the opportunity to define and execute one of the most critical technologies enabling next-generation interplanetary missions. You will operate in a fast-paced, iterative environment, where rapid prototyping, early testing, and continuous learning are key to success. You'll lead hands-on development campaigns to evaluate key technologies, derisk interfaces, and validate performance before full system integration. You'll work across internal and external teams to turn concepts into hardware, balancing agility and rigor as you move quickly from analysis to prototypes to flight-ready systems. Ultimately, you will lead the effort to deliver a robust, high-performance optical communications capability that enables breakthrough science across the solar system. About You: • Bachelor's or Master's degree in Electrical Engineering, Optical Engineering, Mechanical Engineering, Aerospace Engineering, or a related technical field, • 5+ years of experience in laser communications, optical systems engineering, or spacecraft communications system development, • Proven ability to take complex technical systems from concept through qualification, integration, and operational deployment, • Hands-on proficiency in electromechanical prototyping, including integration of optics, electronics, and mechanical subsystems such as gimbals, pointing mechanisms, and precision mounts, • Deep understanding of optical communications subsystems, including pointing, acquisition, and tracking (PAT); modems; and photonic hardware, • Excellent communication skills with the ability to synthesize technical details and drive decision-making across engineering and program teams Nice to haves but not required: • Experience with spaceflight hardware environmental testing and qualification, • Familiarity with NASA or commercial spacecraft systems engineering processes in an applied / New-Space manner is a plus, • Experience with deep-space or high-radiation avionics systems At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$160,000—$214,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR FPGA ENGINEER II We are currently seeking a Sr. FPGA Engineer II for a future opening to join our FPGA team based out of Long Beach, CA. This team supports our Space Systems division, and leads cutting-edge satellite programs for civil, commercial, and defense customers. As a Sr. FPGA Engineer II, you will be responsible for development and verification of FPGA firmware designs for the avionics systems in our spacecraft programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of FPGA firmware design, from requirements definition to design, implementation, verification, and testing. As an engineer on the spacecraft development team, you will have frequent opportunities to test and operate your systems on-orbit. We're looking for people who are passionate about spacecraft electrical hardware design, with a willingness to learn in a fast-paced environment. WHAT YOU'LL GET TO DO: • Collaborate with other engineering disciplines in developing firmware architecture and requirements, • Design and verify FPGA firmware for Xilinx and Microchip FPGA and SoC devices, • Develop documentation for FPGA operation and interfacing with other SW and FPGA systems, • Participate in test campaigns, ranging from module-level to automated testing at the unit and system level YOU'LL BRING THESE QUALIFICATIONS AS SENIOR FPGA ENGINEER II: • Bachelor's degree in electrical, computer, or software engineering; or other engineering degree, • 8+ years of experience with FPGA firmware development, • Proficiency in VHDL, • Strong understanding of FPGA design fundamentals and principles, • U.S. citizenship due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD degree in electrical, computer, or software engineering; or other engineering degrees, • Proficiency with Xilinx and Microchip devices and tools, • Proficiency with verification frameworks including UVM and VUnit, • Experience with software defined radios and DSP algorithms, • Experience with feedback control systems, • Experience with FPGAs and embedded systems in a radiation environment, including SEU/SEL impact and mitigation within spacecraft avionics, • Proficiency with concepts in signal integrity and digital timing with experience in digital worst case circuit analysis (DWCCA), • Experience working with common interface protocols including SPI, UART, I2C, and CAN, • Experience working with high-speed interface protocols including GigE and PCIe, • Proficiency with embedded software, • Proficiency in reading PCB designs and schematics, • Proficiency with lab tools and working with hardware, • Proficiency with GIT repository, • Proficiency with JIRA, • Experience with development in continuous integration environment, • Demonstrated success working in a dynamic environment and ability to manage competing priorities This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$143,300—$214,850 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As the Staff Electrical Engineer within the Interplanetary Sciences Program, you will own revolutionizing the next generation of in-space compute and storage capability by leveraging the latest terrestrial technologies and challenging the status quo of how high-capability compute and storage are done in the space sector. You will be responsible for delivering fully functional space-ready compute units to the flight spacecraft as well as setting up ground-based hardware twins for hardware in the loop and terrestrial based compute capability. You will be working closely with the science team to maximize capability by balancing the compute (CPU, GPU, TPU, etc..), memory, storage needs with the technical constraints of the flight spacecraft (power, thermal, EMI, mechanical, etc…). This role will also work closely in conjunction with the software team to bring up the core software infrastructure both on the spacecraft and on the ground side, and iterating with the software team to ensure the full compute system operates as intended in all environments. This role will be a high responsibility, high autonomy, and high accountability role within a fast-paced, iterative environment, where rapid prototyping, early testing, and continuous learning are key to success. You'll lead hands-on development campaigns to evaluate key technologies, derisk interfaces, and validate performance before full system integration. You'll also work across internal and external teams to turn concepts into hardware, balancing agility and rigor as you move quickly from analysis to prototypes to flight-ready systems. About You: • Bachelor's or Master's degree in Electrical Engineering, Physics, or a related technical field, • 7+ years designing and delivering digital, compute-centric electronic systems, • Proven experience leading design and delivery of complex electrical systems, including RF and compute-heavy projects, • Hands-on work with challenging thermal and electromechanical environments, • Strong grasp of systems engineering, interface management, and risk management principles for complex programs, • Excellent technical communication, problem-solving, and cross-disciplinary collaboration skills Nice to haves but not required: • Direct architecture or EE design experience with non-volatile storage, mobile compute, and/or server class computing is a plus, • Experience with compute and storage survivability in space and radiation environments is a plus At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$179,000—$241,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As the Staff Electrical Engineer within the Interplanetary Sciences Program, you will own the next generation of deep space compute and storage capability by leveraging the latest terrestrial technologies and challenging the status quo of onboard compute and storage to other planets. You will be responsible for designing, building, and qualifying high performance spacecraft electronics within the span of compute modules, network switches, storage nodes, and communications terminals. You will be working closely with the science team to maximize capability by balancing the capability (CPU, GPU, storage capacity, network bandwidth) with the technical constraints of the flight spacecraft (power, thermal, EMI, mechanical, reliability, etc…). This role will also work closely in conjunction with the software team to bring up the core software infrastructure both on the spacecraft and on the ground side, and iterating with the software team to ensure the full system elements operate as intended in all environments. This role will be a high responsibility, high autonomy, and high accountability role within a fast-paced, iterative environment, where rapid prototyping, early testing, and continuous learning are key to success. You'll lead hands-on development campaigns to evaluate key technologies, derisk interfaces, and validate performance before full system integration. You'll also work across internal and external teams to turn concepts into hardware, balancing agility and rigor as you move quickly from analysis to prototypes to flight-ready systems. About You: • Bachelor's or Master's degree in Electrical Engineering, Physics, or a related technical field or equivalent experience., • 7+ years designing and delivering high performance digital electronics, • Proven experience leading design, bringup, and validation of sophisticated board level electronics, • Hands-on work with challenging thermal and electromechanical environments, • Excellent technical communication, problem-solving, and cross-disciplinary collaboration skills Nice to haves but not required: • Direct architecture or EE design experience with non-volatile storage, mobile compute, and/or server class computing is a plus, • Experience designing power supplies for digital electronics, such as multi rail converters with strict sequencing requirements, • Experience with compute and storage survivability in space and radiation environments is a plus, • Strong grasp of practical systems integration and risk management in a development program At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$175,000—$263,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR ELECTRICAL ENGINEER I Based at Rocket Lab's global headquarters in Long Beach, CA, the Senior Electrical Engineer I will participate in the development and test of avionics hardware for our spacecraft programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of electrical hardware development, from requirements definition through design, prototyping, fabrication, testing, and production. As an engineer on the spacecraft development team, you will have frequent opportunities to test and operate your systems on-orbit. We're looking for people who are passionate about spacecraft electrical hardware design, with a willingness to learn in a fast-paced environment. WHAT YOU'LL GET TO DO: • Develop PCBA requirements in collaboration with other engineering disciplines, • Schematic capture and PCB layout using Altium Designer, • Circuit analysis, including power, tolerance, and reliability related, • PCBA design verification testing and system integration testing, • Production manufacturing support as needed (Please note: this position can be hired at the Senior Electrical Engineer I or Senior Electrical Engineer II level) YOU'LL BRING THESE QUALIFICATIONS AS SENIOR ELECTRICAL ENGINEER I: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • 5+ years of electrical hardware design experience, including schematic capture and PCB layout, • A strong background in analog electronics design, • Proficiency performing circuit analyses in SPICE and Excel, • Active Secret Clearance with ability to obtain a TS/SCI THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD in electrical or computer engineering; or other engineering discipline, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering irons, etc., • Experience designing for space environments, including radiation impacts and mitigation, • Experience designing for high-reliability aerospace applications, • Experience designing rigid-flex PCBs and electromechanical design familiarity in general, • Experience with FPGA design and embedded software development for ARM core processors, • Demonstrated success working in a dynamic environment and ability to manage competing priorities This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$130,000—$170,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR ELECTRICAL ENGINEER I Based at Rocket Lab's global headquarters in Long Beach, CA, the Senior Electrical Engineer I will participate in the development and test of avionics hardware for our spacecraft programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of electrical hardware development, from requirements definition through design, prototyping, fabrication, testing, and production. As an engineer on the spacecraft development team, you will have frequent opportunities to test and operate your systems on-orbit. We're looking for people who are passionate about spacecraft electrical hardware design, with a willingness to learn in a fast-paced environment. WHAT YOU'LL GET TO DO: • Develop PCBA requirements in collaboration with other engineering disciplines, • Schematic capture and PCB layout using Altium Designer, • Circuit analysis, including power, tolerance, and reliability related, • PCBA design verification testing and system integration testing, • Production manufacturing support as needed YOU'LL BRING THESE QUALIFICATIONS AS SENIOR ELECTRICAL ENGINEER I: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • 5+ years of electrical hardware design experience, including schematic capture and PCB layout, • A strong background in analog electronics design, • Proficiency performing circuit analyses in SPICE and Excel, • U.S. citizenship required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD in electrical or computer engineering; or other engineering discipline, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering irons, etc., • Experience designing for space environments, including radiation impacts and mitigation, • Experience designing for high-reliability aerospace applications, • Experience designing rigid-flex PCBs and electromechanical design familiarity in general, • Experience with FPGA design and embedded software development for ARM core processors, • Demonstrated success working in a dynamic environment and ability to manage competing priorities This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$130,000—$170,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionDiagnose and treat diseases, injuries, and malformations of teeth and gingiva, and related oral structures by performing the following duties. Benefits: • Free Medical, Dental & Vision, • 13 Paid Holidays + PTO, • 403 (B) retirement match, • Life Insurance, EAP, • Flexible Spending Account, • Succession plans & growth within QUALIFICATIONS Education & Experience: (Required) • Graduate dentist with state license or regional boards and eligible to practice Dentistry in California., • The preference is for a General Dentist with a minimum of 2-3 years experience, • Strong charting/documentation skills., • OJT accredited, • Bilingual English/Spanish (Preferred), • Proficient Microsoft Office and Excel (familiarity with medical terminology)., • EDR- Electronic Dental Record (Preferred), • PMS- Practice Management System (Preferred), • Familiarity with dental management programs, such as Dentrix Licensure/Certification: • DDS, OSHA Certification, CPR License, X-ray Radiation License, • Employees are responsible for maintaining individual certifications as required by job function or by law and provide verification and recertification when requested by management. ESSENTIAL DUTIES AND RESPONSIBILITIES Proficient in all aspects of general dentistry including the ability to perform selected specialty services. Specifically, the provider should possess the expertise and competency to perform the following: • Assist in patient scheduling to assure dental clinic productivity and appropriate management of dental patients., • Communicate dental treatment information to patients, parents or guardians and clinical staff in a clear and effective manner., • Diagnose pathological or irregular oral conditions., • Document and chart in the patients’ dental records appropriately, using EDR and ability to effectively use practice management software (Dentrix) to schedule, chart, document and bill., • Interpret radiograph; examine, diagnose, and treatment plan diseases and abnormalities and disorders of the oral and facial structure., • Perform routine preventative, periodontal, oral surgery, endodontic, and prosthodontics treatment., • Provide quality dental services to patients efficiently., • Provides limited supervision of dental staff assigned to their clinic location and oversee management of equipment and supplies., • Refer to specialist(s) when required., • Restore health and function of carious and defective teeth and administer anesthesia as needed to carry out the procedures., • Willing to work late shifts and Saturdays., • Willing to work with children., • Positive and pleasant attitude., • Willing to learn and adjust within an organization., • Neat and meticulous., • Good and effective communication skills. St. John’s Community Health is an Equal Employment Opportunity Employer

Job Description College Medical Center Long Beach is proud to be part of College Hospitals. We are dedicated to providing the highest quality of customer service, delivered with warmth, friendliness, and organizational pride. Join a team that values respect, flexibility, a tight-knit work environment, and the autonomy to utilize your knowledge and experience. Job Summary: College Medical Center is seeking a Per-Diem Nuclear Medicine Technologist. This position supports the Mission of the Hospital through the provision of distinctive and compassionate care to our patients and by performing high-quality nuclear medicine procedures as requested by a licensed physician. The technologist instructs, educates, and prepares patients for exams, demonstrates proficiency in safely administering isotopes, and consistently adheres to radiation safety standards. Job Qualifications: Current California Nuclear Medicine license Minimum 2 years’ experience as a Nuclear Medicine Technologist preferred National certification (NMTCB or ARRT) preferred Current BLS for Healthcare Providers (CPR) required upon hire; must obtain CPI certification within 30 days of hire Demonstrated competency in age-appropriate tasks, skills, and procedures Ability to speak, read, and write English fluently Job-Specific Duties: Perform high-quality nuclear medicine studies. Instruct, educate, and prepare patients for exams. Safely administer isotopes and follow radiation safety standards. Perform daily quality control and monitor the Nuclear Medicine department. Maintain accurate records in compliance with state and national regulations. Apply appropriate injection protocols. Assess patients before, during, and after procedures. If you are passionate about making a difference and seeking a supportive team environment to grow your skills, we welcome your application. Placement in the pay range is based on multiple factors, including but not limited to relevant years of experience and qualifications. In addition to base pay, additional compensation may be available for CHLB/Glendora Hospital roles, such as shift differentials and other special pay practices. The posted compensation for this position is a reasonable estimate that ranges from the lowest to the highest pay CHLB/Glendora Hospital, in good faith, believes it might pay for this job based on the circumstances at the time of posting.

Job Description College Medical Center Long Beach is proud to be part of College Hospitals. We are dedicated to providing the highest quality of customer service, delivered with warmth, friendliness, and organizational pride. Join a team that values respect, flexibility, a tight-knit work environment, and the autonomy to utilize your knowledge and experience. Job Summary: College Medical Center is seeking a full-time Nuclear Medicine Technologist. This position supports the Mission of the Hospital through the provision of distinctive and compassionate care to our patients and by performing high-quality nuclear medicine procedures as requested by a licensed physician. The technologist instructs, educates, and prepares patients for exams, demonstrates proficiency in safely administering isotopes, and consistently adheres to radiation safety standards. Schedule: Monday–Friday, 8:00 a.m.–4:30 p.m., with required on-call coverage. Job Qualifications: Current California Nuclear Medicine license Minimum 2 years’ experience as a Nuclear Medicine Technologist preferred National certification (NMTCB or ARRT) preferred Current BLS for Healthcare Providers (CPR) is required upon hire; must obtain CPI certification within 30 days of hire Demonstrated competency in age-appropriate tasks, skills, and procedures Ability to speak, read, and write English fluently Job-Specific Duties: Perform high-quality nuclear medicine studies. Instruct, educate, and prepare patients for exams. Safely administer isotopes and follow radiation safety standards. Perform daily quality control and monitor the Nuclear Medicine department. Maintain accurate records in compliance with state and national regulations. Apply appropriate injection protocols. Assess patients before, during, and after procedures. If you are passionate about making a difference and seeking a supportive team environment to grow your skills, we welcome your application. Placement in the pay range is based on multiple factors, including but not limited to relevant years of experience and qualifications. In addition to base pay, additional compensation may be available for CHLB/Glendora Hospital roles, such as shift differentials and other special pay practices. The posted compensation for this position is a reasonable estimate that ranges from the lowest to the highest pay CHLB/Glendora Hospital, in good faith, believes it might pay for this job based on the circumstances at the time of posting. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Medical Specialty: Nuclear Medicine License/Certification: BLS Certification (Preferred) ARRT Certification (Preferred) Work Location: In person

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for Computed Tomography (CT) Technologists to support the VA Long Beach Healthcare System (Tibor Rubin VA Medical Center) located at 5901 East 7th St Long Beach, CA 90822. Available shift schedules include days, evenings, and nights. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Position Pays: $62 - $67.09/hr Responsibilities • Independently operate CT scanner equipment to perform complex CT imaging exams, • Practice CT safety and radiation protection standards, • Receive patients, explain procedures, and position patients appropriately, • Select and adjust technical parameters and accessory equipment, • Prepare CT suites, ensuring sterile supplies and contrast materials are available, • Administer IV contrast under radiologist supervision, • Send images to PACS, perform image post‑processing and case editing, • Maintain patient records using Radiology VistA and CPRS Qualifications • Minimum 1 year of current CT experience, • Current ARRT (R) and ARRT (CT) certification, • Demonstrated experience with IV and contrast injections, • Current BLS certification, • PACS experience (AGFA preferred, not required), • No sponsorship available All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR eHENTmbXQ2

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: As a Staff Optical Communications Engineer within the Interplanetary Sciences Program, you will own the end-to-end architecture, design, development, and delivery of a deep-space optical communications terminal. You will be responsible for translating mission needs into system performance requirements, developing architectures, and driving implementation through in-house design or external partnerships. This role offers the opportunity to define and execute one of the most critical technologies enabling next-generation interplanetary missions. You will operate in a fast-paced, iterative environment, where rapid prototyping, early testing, and continuous learning are key to success. You'll lead hands-on development campaigns to evaluate key technologies, derisk interfaces, and validate performance before full system integration. You'll work across internal and external teams to turn concepts into hardware, balancing agility and rigor as you move quickly from analysis to prototypes to flight-ready systems. Ultimately, you will lead the effort to deliver a robust, high-performance optical communications capability that enables breakthrough science across the solar system. About You: • Bachelor's or Master's degree in Electrical Engineering, Optical Engineering, Mechanical Engineering, Aerospace Engineering, or a related technical field, • 7+ years of experience in laser communications, optical systems engineering, or spacecraft communications system development, • Proven ability to take complex technical systems from concept through qualification, integration, and operational deployment, • Hands-on proficiency in electromechanical prototyping, including integration of optics, electronics, and mechanical subsystems such as gimbals, pointing mechanisms, and precision mounts, • Deep understanding of optical communications subsystems, including pointing, acquisition, and tracking (PAT); modems; and photonic hardware, • Excellent communication skills with the ability to synthesize technical details and drive decision-making across engineering and program teams Nice to haves but not required: • Experience with spaceflight hardware environmental testing and qualification, • Familiarity with NASA or commercial spacecraft systems engineering processes in an applied / New-Space manner is a plus, • Experience with deep-space or high-radiation avionics systems At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$188,000—$251,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description SpinLaunch is building Meridian, a next-generation broadband constellation designed to deliver high-capacity, low-latency connectivity to users around the globe. Backed by leading venture capital and engineering partners, we are rapidly scaling the design, production, and deployment of the satellites and ground systems that will bring Meridian online. Joining the Meridian team means working at the forefront of one of the most ambitious commercial space programs underway today — designing, building, and operating spacecraft that will reshape global connectivity. You'll be part of a close-knit, collaborative team that thrives in a fast-paced, innovative environment, where your work directly advances a constellation that millions will depend on. Your Mission on the Team: In this role you will be responsible for developing and optimizing software tools that simulate advanced satellite communication constellations in low Earth orbit (LEO). You will also contribute to analyses that model the effectiveness, feasibility, and uncertainty within the Meridian system for both internal and external stakeholders. This includes: • Writing and applying software tools that model constellation performance, utilization, and lifecycles., • Conducting analyses to translate end-to-end Meridian constellation solutions to customers, including modeling global market demand for communication services and constellation support infrastructure (ground stations etc.), • Collaborating closely in cross-functional teams to understand how design choices impact the expected constellation performance and contribute to decisions on how to optimize this system., • Validate, optimize, and deploy advanced resource optimization algorithms to solve complex, multi-dimensional telecom constellation design problems such as beam placement and interference mitigation., • Develop world-class software using best practices, including CI/CD principles, code reviews, Agile methodologies, and project management tools., • Communicate effectively with project management, customers, and team members across disciplines Basic Qualifications: • Bachelor’s degree in computer science, aerospace engineering, mathematics, physics or related field, • Experience with Python for analysis, modeling, simulation, and/or algorithm development (especially NumPy and pandas), • Strong software engineering skills, including system design, testing, and version control., • Strong understanding and knowledge of 3D vector geometry and calculus, • Ability to rapidly expand application specific knowledge sets and skills where necessary, • Passion for understanding complexity and finding answers to challenging questions, • Excellent verbal and written communication skills Preferred Qualifications: • 3+ years of related industry experience and/or higher degree (master's degree or PhD) in related field, • Experience architecting and maintaining scalable, extensible software systems., • Expertise in several of the following areas:, • High-Performance Computing (HPC), • Distributed Computing/Cloud Computing, • GPU Optimization, • Agentic AI, • Statistical Analysis, • Experience with Docker, Kubernetes, and modern DevOps/CI/CD practices., • Demonstrated success optimizing computationally intensive software for performance and scalability., • Experience solving complex, multi-dimensional optimization problems., • Experience working on satcom or other telecommunication systems, • Experience modelling antenna radiation patterns, • Experience working on LEO satellite constellation(s), • Experience in with LEO spacecraft and/or space mission top level design ITAR Requirements SpinLaunch is required by the U.S. Government to comply with various space technology export regulations including the International Traffic in Arms Regulations (ITAR). All applicants must be a U.S. citizen, lawful permanent resident (“green card holder”) or a protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State. More information on ITAR can be found here. SpinLaunch is committed to creating a diverse environment and is proud to be an equal opportunity employer. Each individual has the right to work in a professional environment that promotes equal employment opportunity and prohibits discriminatory practices, including harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Interplanetary Sciences Program was established to expand access to scientific exploration across our solar system. Its mission is to make planetary research faster, more affordable, and more capable than ever before by rethinking how science missions are designed, built, and operated. The program aims to enable scientists to send instruments to distant worlds without decades of development or prohibitive costs. By creating a sustainable model for interplanetary exploration, we are transforming space science from an occasional event into a continuous process of discovery that accelerates knowledge, broadens participation, and inspires the next generation of explorers. About the Role: • Own the complete storage platform software stack for a space-based data center: custom Linux kernel drivers, OpenZFS pool design, NFS data serving, and automated fault recovery, shipping a platform that preserves up to a petabyte of mission data through years of radiation exposure, • Design and implement custom Linux kernel drivers for NVMe fault recovery and GPIO overcurrent protection, working across PCI/PCIe, block layer, and interrupt subsystems to detect and recover from radiation-induced upsets without data loss, • Lead the ZFS pool topology architectural decisions by building quantitative reliability models that balance upset probability, resilver risk, and capacity over a 6+ year mission, then validate through fault injection testing, • Develop the integration layer between NVMe controller reset and ZFS, ensuring that a drive recovering from a transient fault re-enters the storage pool cleanly, bridging driver-level recovery with filesystem-level fault tolerance, • Rapidly prototype on commodity hardware, from first boot through sustained 10 Gbps writes with automated fault recovery, de-risking the architecture before committing to the target platform, then carry the design through integration and launch About You: • 5+ years writing Linux kernel code, actual driver development involving PCI/PCIe devices, block storage, or interrupt-driven hardware, with meaningful time spent in kernel space, • Experience with storage systems: ZFS or other copy-on-write filesystems, RAID, NVMe internals, or high-throughput network storage (e.g., NFS), • Depth in one or more: filesystem internals, block layer / device management, or storage protocol implementation, • Strong working knowledge of OS internals: virtual memory, interrupt context constraints, synchronization primitives, and I/O stack behavior Nice to haves but not required: • Hands-on experience at the driver hardware software boundary: DMA coherency, MMIO semantics, PCIe enumeration, and cache behavior, • Strong working knowledge of data structures and systems reasoning for storage (Merkle trees, NVMe submission/completion queue ring buffers, hash tables, radix trees), • Experience testing storage systems, including fault injection (PCIe/NVMe resets, error storms), low-level tracing (ftrace/perf/bpftrace), and crash dump analysis (kdump/vmcore), • Experience designing software recovery around storage hardware fault cases, whether that's storage firmware, autonomous vehicle data systems, large-scale distributed infrastructure, or embedded platforms, • Familiarity with embedded Linux build systems (Yocto or Buildroot) and cross-compilation, • Hardware lab comfort: serial consoles, logic analyzers, and willingness to debug PCIe enumeration failures on a prototype board alongside the electrical engineers At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$181,000—$271,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access to space. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. ELECTRICAL ENGINEER I/II We are currently seeking an Electrical Engineer I/II for our avionics design engineering team based out of Long Beach, CA. You will participate in the development and test of avionics hardware for our spacecraft programs. You will work collaboratively with engineers of various disciplines and participate in all aspects of electrical hardware development, from requirements definition through design, prototyping, fabrication, testing, and production. As an engineer on the spacecraft development team, you will have frequent opportunities to test and operate your systems on orbit. We're looking for people who are passionate about spacecraft electrical hardware design, with a willingness to learn in a fast-paced environment. WHAT YOU'LL GET TO DO: • Develop PCBA requirements in collaboration with other engineering disciplines, • Schematic capture and PCB layout using Altium Designer, • Circuit analysis, including power, tolerance, and reliability related, • PCBA design verification testing and system integration testing, • Production manufacturing support as needed (Please note: this position can be hired at the Electrical Engineer I or Electrical Engineer II level) QUALIFICATIONS YOU'LL BRING AS ELECTRICAL ENGINEER I: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • A strong background in analog electronics design, • Proficiency performing circuit analyses in SPICE and Excel, • U.S. citizenship required, due to program requirements QUALIFICATIONS YOU'LL BRING AS ELECTRICAL ENGINEER II: • Bachelor's degree in electrical or computer engineering; or other engineering degree, • 2+ years of electrical hardware design experience, including schematic capture and PCB layout, • Strong understanding of electric circuit design fundamentals and electrical engineering principles, • Proficiency with basic electronic lab equipment, such as: power supplies, oscilloscopes, DMMs, signal generators, 1 and soldering irons, • Experience in creation of design verification test plans and test execution, • U.S. citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's degree in electrical or computer engineering; or other engineering discipline, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering irons, etc., • Experience designing for space environments, including radiation impacts and mitigation, • Experience in designing high-reliability aerospace applications, • Experience designing rigid-flex PCBs and electromechanical design familiarity in general, • Experience with FPGA design and embedded software development for ARM core processors, • Demonstrated success working in a dynamic environment and ability to manage competing priorities This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$80,000—$126,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description SpinLaunch is building Meridian, a next-generation broadband constellation designed to deliver high-capacity, low-latency connectivity to users around the globe. Backed by leading venture capital and engineering partners, we are rapidly scaling the design, production, and deployment of the satellites and ground systems that will bring Meridian online. Joining the Meridian team means working at the forefront of one of the most ambitious commercial space programs underway today — designing, building, and operating spacecraft that will reshape global connectivity. You'll be part of a close-knit, collaborative team that thrives in a fast-paced, innovative environment, where your work directly advances a constellation that millions will depend on. Your Mission on the Team: You are responsible for the design and development of the satellite communication payload avionics of the Meridian Space constellation. This includes radio systems, antenna signal interfaces, waveguide design, and antenna and radio control systems. As part of a small team tackling ambitious challenges, you’ll take full ownership of the end-to-end success of your hardware in orbit - driving every aspect of development, from design to fully-integrated, space-ready systems. Responsibilities include, but are not limited to: • Designing and developing communication payload avionics systems, including RF front-ends, transceivers, modems, and antenna interfaces, • Developing and reviewing hardware schematics, PCB layouts, and embedded control architectures for communication electronics, • Leading integration, testing, and qualification of payload avionics at subsystem and system levels (EMC, vibration, thermal, etc.), • Participating in failure analysis, root cause investigations, and continuous improvement of communication hardware designs, • Performing link budget analysis, system modeling, and simulation for space-to-ground and inter-satellite communication links Basic Qualifications: • Graduate degree in Electrical Engineering or related field, • Minimum of 4 years of broad experience doing RF/Analog circuit design and board layout using the relevant tools, • General electrical hardware design experience (Power, DC, digital design), • Experience modeling, designing, and testing radio subsystems, preferably for satellite payloads and at a system level, • Proficiency in hardware design tools (Altium Designer, Cadence, or equivalent), • Experience using HFSS, CST, or similar RF simulation tools, • Ability to perform bench-level analog/power bring-up and troubleshooting using analog and digital test equipment like spectrum analyzers, network analyzers, and vector signal generators, • Strong understanding of modulation schemes, RF architectures, and signal integrity principles, • Strong verbal and written communication skills Preferred Qualifications: • Experience with RF component characterization, • Experience with LEO/MEO/GEO satellite communication payloads, • Understanding of radiation effects and mitigation techniques in space environments, • Experience designing, manufacturing, and testing space flight hardware, • Antenna or satellite system design experience, • Expertise in automating test equipment, • Experience using analytical methods for signal integrity analysis ITAR Requirements SpinLaunch is required by the U.S. Government to comply with various space technology export regulations including the International Traffic in Arms Regulations (ITAR). All applicants must be a U.S. citizen, lawful permanent resident (“green card holder”) or a protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State. More information on ITAR can be found here. SpinLaunch is committed to creating a diverse environment and is proud to be an equal opportunity employer. Each individual has the right to work in a professional environment that promotes equal employment opportunity and prohibits discriminatory practices, including harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for Nuclear Medicine Technologists (NMT) - PET/CTs to support the VA Long Beach Healthcare System (Tibor Rubin VA Medical Center) located at 5901 East 7th St, Long Beach, CA 90822. Available shift schedules include days, evenings, and nights. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Position Pays: $72 - $77.09/hr Responsibilities • Independently operate Nuclear Medicine and PET/CT systems, • Perform complex PET, PET/CT, general nuclear medicine, cardiac, static, dynamic, and SPECT studies, • Follow strict nuclear medicine safety and radiation protocols, • Prepare and calibrate radiopharmaceuticals and radio tracers, • Receive patients, explain procedures, position patients, and select technical parameters, • Prepare PET/CT suites with sterile supplies and calibrated radiopharmaceuticals, • Administer radiopharmaceuticals, IV contrast, and tracers under radiologist supervision, • Send images to PACS, perform post‑processing and case editing, • Maintain patient records using Radiology VistA and CPRS Qualifications • Minimum 2 years of current Nuclear Medicine and PET/CT experience, • Current ARRT (N) and/or NMTCB certification, • Experience with IV starts, radiopharmaceutical, and contrast injections, • Current BLS certification, • PACS experience (AGFA preferred; training provided if needed), • No sponsorship available All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR cjhJfCOKuu

Job Description Job Description COC Consulting is looking for a part-time phlebotomist in Long Beach, CA. The Phlebotomist ensures the proper collection, processing, labeling, storage, and mailing of blood and urine samples to the laboratory for testing. • Collects patient blood and/or urine specimens using established procedures, • Properly prepares collected specimens for testing and analysis, ensuring specimen integrity, • Verifies urine and blood test requisitions, • Identifies the patient before any specimen is obtained, • Labels and documents specimens to prepare for shipment, • Maintains daily tallies of collections performed, • Tracks and requests laboratory and office supplies needed to fulfill duties, • Provides site specific procedural training to new employees, • Maintains a safe, secure, and healthy work environment by following standards and procedures; complying with legal regulations; follow Universal Precautions and OSHA standards when handling specimens., • Strictly adheres to HIPAA regulations, • Travels to additional sites when needed, • Performs additional job duties as assigned MINIMUM QUALIFICATIONS • High School Diploma, GED, or equivalent, • Phlebotomy certification from an accredited agency, • Computer and technology proficient, • Valid driver’s license and car insurance, • Reliable transportation, • Ability to pass a background check, • A proven ability to handle ambiguity in the absence of defined systems and processes, • Minimum 2yrs experience or 1yr of hospital inpatient experience PHYSICAL REQUIREMENTS & WORK CONDITIONS • Frequently required to lift, carry, push, and pull up to 20 pounds, • Frequently required to speak and hear, • Frequently required to sit or stand for periods of time and bend, stretch, and stoop, • Frequently required to use all types of vision, such as close vision and computer vision, • Frequently required to use hand dexterity for use of standard office and clinical equipment, • Varying schedule to include evenings, holidays, and/or extended hours as Company dictates, • Occasional exposure to various temperatures, • Frequent exposure to blood and bodily fluids, communicable diseases, chemicals, radiation, and repetitive motions BENEFITS • Competitive salary, • Paid sick time, • Autonomous work, • A company with a huge vision, a dynamic work environment, and a team of talented, ambitious and fun to work-with colleagues! ABOUT THE COMPANY COC, Continuity of Care, is a leading provider of mobile phlebotomy and imaging services in the US. Operating in 14 states currently and expanding every month, COC is the largest non-lab owned mobile phlebotomy company on the West Coast. COC provides services to mental health centers, skilled nursing facilities, community care-based programs, local government outreach programs, workers compensation, dental offices, doctors’ offices, and even in-home services. The company’s relationships with local and national labs allow for our client/patient’s samples to be processed quickly preventing any delays in care.

Job Description COC Consulting is looking for a full time phlebotomist in Long Beach, CA. The Phlebotomist ensures the proper collection, processing, labeling, storage, and mailing of blood and urine samples to the laboratory for testing. • Collects patient blood and/or urine specimens using established procedures, • Properly prepares collected specimens for testing and analysis, ensuring specimen integrity, • Verifies urine and blood test requisitions, • Identifies the patient before any specimen is obtained, • Labels and documents specimens to prepare for shipment, • Maintains daily tallies of collections performed, • Tracks and requests laboratory and office supplies needed to fulfill duties, • Provides site specific procedural training to new employees, • Maintains a safe, secure, and healthy work environment by following standards and procedures; complying with legal regulations; follow Universal Precautions and OSHA standards when handling specimens., • Strictly adheres to HIPAA regulations, • Travels to additional sites when needed, • Performs additional job duties as assigned MINIMUM QUALIFICATIONS • High School Diploma, GED, or equivalent, • Phlebotomy certification from an accredited agency, • Computer and technology proficient, • Valid driver’s license and car insurance, • Reliable transportation, • Ability to pass a background check, • A proven ability to handle ambiguity in the absence of defined systems and processes, • Minimum 2yrs experience or 1yr of hospital inpatient experience PHYSICAL REQUIREMENTS & WORK CONDITIONS • Frequently required to lift, carry, push, and pull up to 20 pounds, • Frequently required to speak and hear, • Frequently required to sit or stand for periods of time and bend, stretch, and stoop, • Frequently required to use all types of vision, such as close vision and computer vision, • Frequently required to use hand dexterity for use of standard office and clinical equipment, • Varying schedule to include evenings, holidays, and/or extended hours as Company dictates, • Occasional exposure to various temperatures, • Frequent exposure to blood and bodily fluids, communicable diseases, chemicals, radiation, and repetitive motions BENEFITS • Competitive salary, • Paid sick time, • Autonomous work, • A company with a huge vision, a dynamic work environment, and a team of talented, ambitious and fun to work-with colleagues! ABOUT THE COMPANY COC, Continuity of Care, is a leading provider of mobile phlebotomy and imaging services in the US. Operating in 14 states currently and expanding every month, COC is the largest non-lab owned mobile phlebotomy company on the West Coast. COC provides services to mental health centers, skilled nursing facilities, community care-based programs, local government outreach programs, workers compensation, dental offices, doctors’ offices, and even in-home services. The company’s relationships with local and national labs allow for our client/patient’s samples to be processed quickly preventing any delays in care.

Job Description COC Consulting is looking for a part-time phlebotomist in Long Beach, CA. The Phlebotomist ensures the proper collection, processing, labeling, storage, and mailing of blood and urine samples to the laboratory for testing. • Collects patient blood and/or urine specimens using established procedures, • Properly prepares collected specimens for testing and analysis, ensuring specimen integrity, • Verifies urine and blood test requisitions, • Identifies the patient before any specimen is obtained, • Labels and documents specimens to prepare for shipment, • Maintains daily tallies of collections performed, • Tracks and requests laboratory and office supplies needed to fulfill duties, • Provides site specific procedural training to new employees, • Maintains a safe, secure, and healthy work environment by following standards and procedures; complying with legal regulations; follow Universal Precautions and OSHA standards when handling specimens., • Strictly adheres to HIPAA regulations, • Travels to additional sites when needed, • Performs additional job duties as assigned MINIMUM QUALIFICATIONS • High School Diploma, GED, or equivalent, • Phlebotomy certification from an accredited agency, • Computer and technology proficient, • Valid driver’s license and car insurance, • Reliable transportation, • Ability to pass a background check, • A proven ability to handle ambiguity in the absence of defined systems and processes, • Minimum 2yrs experience or 1yr of hospital inpatient experience PHYSICAL REQUIREMENTS & WORK CONDITIONS • Frequently required to lift, carry, push, and pull up to 20 pounds, • Frequently required to speak and hear, • Frequently required to sit or stand for periods of time and bend, stretch, and stoop, • Frequently required to use all types of vision, such as close vision and computer vision, • Frequently required to use hand dexterity for use of standard office and clinical equipment, • Varying schedule to include evenings, holidays, and/or extended hours as Company dictates, • Occasional exposure to various temperatures, • Frequent exposure to blood and bodily fluids, communicable diseases, chemicals, radiation, and repetitive motions BENEFITS • Competitive salary, • Paid sick time, • Autonomous work, • A company with a huge vision, a dynamic work environment, and a team of talented, ambitious and fun to work-with colleagues! ABOUT THE COMPANY COC, Continuity of Care, is a leading provider of mobile phlebotomy and imaging services in the US. Operating in 14 states currently and expanding every month, COC is the largest non-lab owned mobile phlebotomy company on the West Coast. COC provides services to mental health centers, skilled nursing facilities, community care-based programs, local government outreach programs, workers compensation, dental offices, doctors’ offices, and even in-home services. The company’s relationships with local and national labs allow for our client/patient’s samples to be processed quickly preventing any delays in care.

Denver, CO or Long Beach, CA Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it. True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground. Be the offset. We create asymmetric advantages with creativity and ingenuity. What would it take? We challenge assumptions to deliver ambitious results. It's the people. Our team is our competitive advantage and we are better together. True Anomaly is seeking an innovative Electro-Optical Systems Engineering Manager to lead a small, agile team responsible for the design, development, integration, and testing of high-performance, affordable optical systems for our seeker and autonomous orbital vehicles. This includes Rendezvous and Proximity Operations (RPO) suites, LiDAR, hyperspectral imaging, and other advanced EO/IR payloads. Reporting to the VP of New Product Engineering, this role encompasses deep technical contribution alongside people management and strategic product planning. The successful candidate will be a recognized expert in electro-optical systems development, with a command of the state-of-the-art in the field and the judgment to evaluate vertically integrated versus COTS solutions with speed and confidence. You will work closely with Business Development and the Program Office to define and execute the company's EO systems roadmap, translating mission needs into fielded hardware that delivers real on-orbit capability. Own the technical direction for EO/IR payload systems, including seekers, RPO sensor suites, LiDAR, and hyperspectral imaging systems Lead, mentor, and grow a team of electro-optical engineers across the full payload development lifecycle Oversee end-to-end EO systems development: requirements definition, optical and systems design, component selection, analysis, procurement, integration, and test Evaluate and down-select between vertically integrated and COTS solutions based on performance, cost, schedule, and mission risk Partner with the VP of New Product Engineering, Business Development, and Program Office to define and maintain the company's EO systems development roadmap Develop and maintain optical performance budgets, including radiometric, signal-to-noise, and resolution analyses Ensure payload designs meet mission requirements for reliability, thermal performance, radiation tolerance, and size, weight, and power (SWaP) constraints Manage schedules, budgets, staffing, and technical risk across multiple EO payload programs Collaborate with avionics, systems engineering, GNC, and software teams to ensure seamless spacecraft integration Drive compliance with applicable aerospace standards and lead design reviews with internal stakeholders and customers Communicate product development status and issues with leadership and stakeholders Bachelor's degree in Optical Engineering, Physics, Electrical Engineering, or related field (Master's preferred) 10+ years of professional experience in electro-optical systems design and development for aerospace, defense, or high-reliability applications Demonstrated experience with EO/IR imaging systems, including detector selection, optical design, and system-level performance modeling Experience with proximity operations or seeker sensor architectures, LiDAR systems, or hyperspectral imaging payloads Strong understanding of radiometric analysis, optical performance budgeting, and image quality assessment Familiarity with SWaP-constrained design trade-offs for spacecraft payloads Demonstrated ability to lead engineering teams and deliver complex hardware on schedule Experience with space-qualified or radiation-tolerant EO/IR detector and focal plane array technologies Familiarity with optical design tools such as Zemax/OpticStudio, CODE V, or similar Experience with LiDAR system design, waveform processing, and point cloud generation Knowledge of hyperspectral sensor design, calibration, and on-orbit data processing Experience with thermal and structural analysis of optomechanical systems Familiarity with CCSDS or other space telemetry standards for payload data downlink Experience working in a fast-paced, startup environment or a similarly dynamic setting Base Salary: $190,000-$295,000 Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. Ability to maintain or obtain TS//SCI clearance Work Location this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed. Work environment the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job. Physical demands the physical demands of the job, including bending, sitting, lifting and driving.

Ansible Government Solutions, LLC (Ansible) is currently recruiting a PRN Radiation Therapy Technologist to provide onsite services to eligible beneficiaries of the Tibor Rubin VA Medical Center located at 5901 E. 7th St. Long Beach, CA 90822. The clinic hours are typically Monday-Friday, 7:30am-4pm. Must be able to cover at least 4 shifts per month. By accepting employment with Ansible, you acknowledge that your assigned schedule may change based on operational needs and at the direction of either Ansible or its customers. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers' success as if it is their own. • Operate linear accelerators and other radiation therapy equipment to deliver prescribed radiation treatments to patients., • Prepare imaging, simulation, treatment, and ancillary equipment for patient use., • Position patients accurately for treatment, using immobilization devices as necessary., • Explain procedures to patients, ensuring their comfort and cooperation throughout the treatment process., • Observe and monitor patients during treatments for reactions and safety concerns., • Maintain accurate treatment records, including daily treatment notes in the Computerized Patient Record System (CPRS)., • Perform daily quality assurance checks on radiation therapy equipment., • Assist in CT simulation procedures, including acquiring specific data sets as prescribed by physicists or physicians., • Construct accurate contours of patients' bodies and perform necessary measurements for treatment planning., • Operate simulator equipment and take high-quality radiographs to accurately localize tumor volumes., • Limit radiation fields using lead cut-outs or multi-leaf collimation (MLC)., • Assist Radiation Oncologists with bolus design according to physician's direction., • Maintain and update patient treatment charts and records., • Adhere to all radiation safety guidelines, policies, and procedures., • Participate in quality improvement activities and continuing education., • Collaborate effectively with the multidisciplinary radiation oncology team., • Graduate of a JRCERT-accredited Radiation Therapy program (or equivalent accredited program), • ARRT(T) certification, • AHA BLS certification, • Minimum 1 year of Radiation Therapist experience, • Experience with: 3D-CRT, IMRT, IGRT, CT Simulation, • Experience with Varian TrueBeam and ARIA (if this is actually used at the site), • Patient care and communication skills, • VA background check requirement, • No sponsorship currently available All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance, • Push/pull with 30 lbs of force All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The VA Long Beach Healthcare System (VALBHS) is seeking an accomplished and mission-driven physician leader to serve as Chief of the Imaging Health Care Group. This is an exceptional opportunity to lead one of the largest clinical departments in the system, overseeing Diagnostic and Interventional Radiology, Nuclear Medicine, and Radiation Oncology services across inpatient, outpatient, and emergency care settings.

Location: MemorialCare - Long Beach Medical Center Department: Radiology Therapy Status: Full Time Shift: Days (10hr) Pay Range*: $63.00/hr - $92.00/hr $10,000 signing bonus available to external hires new to MHS employment, contingent upon satisfaction of employment requirements. MemorialCare is a nonprofit integrated health system that includes four leading hospitals, award-winning medical groups consisting of over 200 sites of care, and more than 2,000 physicians throughout Orange and Los Angeles Counties. We are committed to increasing access to patient-centric, affordable, and high-quality healthcare; your personal contributions are integral to MemorialCare's recognition as a market leader and innovator in value-based and other care models. Across our family of medical centers, we support each one of our bright, talented employees in reaching the highest levels of professional development, contribution, collaboration, and accountability. Whatever your role and whatever expertise you bring, we are dedicated to helping you achieve your full potential in an environment of respect, innovation, and teamwork. The Radiation Therapist is responsible providing daily treatment for cancer patients. Under general supervision and medical direction, the Radiation Therapist utilizes standard radiation therapy practice to provide therapy, management, diagnostic evaluation, education, and care of patients with deficiencies and abnormalities which affect the pulmonary system and associated aspects of cardiopulmonary and other systems functions. • Performs CT scan and clinical based simulations required for the preparation of the delivery of radiation therapy treatments to meet goals of care by utilizing unit-based protocols and standard work and within hospital or departmental policies and procedures. Construct and utilize treatment aides and immobilization devices per physician orders and prescription. Proficiently and safely operates the CT simulator to produce quality images for radiation treatment procedures while adhering to radiation safety rules., • Performs radiation treatment modalities required for the delivery of radiation therapy to meet goals for care by utilizing unit-based protocols and standard work and within hospital or departmental policies and procedures. Set up patients effectively and deliver radiation treatments with precision per physician orders and prescription. Proficiently and safely operates all treatment machines and their imaging modalities (Linear Accelerators, Brain Lab, Align RT, Brachytherapy and Hyperthermia) while adhering to radiation safety rules, • Performs required documentation for treatments and procedures in compliance with departmental and hospital stand work and policies and procedures for Systems at Memorial (EPIC) record and verify (ARIA), chart checks, and quality assurance management and improvement., • Effectively communicates with other health team members and areas of care with regard to the patients' plan of care for treatment, measured outcomes, and make recommendations for alternative care options. Coordinates care with other members of the health care team to achieve desired goals and outcomes., • Participates in efforts to improve the performance of the radiation oncology service and organization. Provides manager and other clinical leaders with information on issues that pertain to patient safety, opportunities to improve outcomes in care, and improvements in systems and processes., • Serves as a preceptor and role model for new personnel and students in training., • Performs other duties as assigned. Placement in the pay range is based on multiple factors including, but not limited to, relevant years of experience and qualifications. In addition to base pay, there may be additional compensation available for this role, including but not limited to, shift differentials, extra shift incentives, and bonus opportunities. Health and wellness is our passion at MemorialCarethat includes taking good care of employees and their dependents. We offer high quality health insurance plan options, so you can select the best choice for your family.

Purpose And Scope: Supports the organization mission, vision, core values and customer service philosophy. Adheres to the organization compliance program, including following all regulatory and organization policy requirements. Principal Duties And Responsibilities: Quality: • Responsible for supporting and driving organization quality standards through meeting regulatory and accrediting body requirements and the practice of Continuous Quality Improvement (CQI), including use of CQI tools., • Assists with implementation of organization quality goals and facility specific action plans in order to achieve organization quality standards., • Accountable for outstanding quality of patient care, as defined by the organization quality goals, to ensure that organization policies and procedures are followed., • Responsible for addressing and acting on adverse events and action thresholds in collaboration with facility management., • Maintains integrity of medical records and other organization administrative and operational records., • Complies with all data collection and auditing activities., • Maintains facility environmental integrity and safety. Patient: • Obtains necessary medical history, discusses procedure and answers questions, and performs nursing assessment on the day of the procedure., • Provides education to patients and patient's family regarding post procedure care of vascular access., • Monitors patient condition before, during and after the procedure, especially patients having moderate sedation and contrast media injections for possible complications or reactions., • Acts as a resource for the patient to address patient concerns and questions., • Identifies and communicates patient related issues to facility management, as needed., • Completes documentation of patient information from admission to discharge in an accurate manner., • Confirm written orders, consents and lab work are completed and documented in accordance with facility policies. This includes appropriate preparation of lab requisitions; delivery to appropriate labs; reporting and forwarding of lab results to appropriate physician., • Maintains competency with all emergency operational procedures, and initiates CPR and emergency measures, as needed., • Administers medications and IV moderate sedation to patients as directed per physician's orders, and in compliance with organization, company, federal, state and local regulations., • Acts as scrub technologist to assist the physician during procedure as needed, maintaining a sterile technique., • Assists with patient workflow by transporting patients as needed., • Performs point of care laboratory testing as directed per physician's orders and in compliance with organization, company, federal, state and local regulations., • Performs IV insertion as per physician orders., • Performs additional tasks as designated by Physician, practicing in compliance with state regulations. Physicians: • Provides regular and effective communication with physicians on an as needed basis., • Attends and participates in CQI meetings with physicians, reporting on assigned topics., • May assist facility management in working with the physicians and staff to verify all necessary instruments and equipment., • Assists the physician in completing and reporting state required adverse event reports and reporting internally as per organization/FMC policy and procedure. Maintenance/Technical: • Operates appropriate facility equipment and technology, including but not limited to, patient monitors, defibrillators, medical recording devices, sterilizers and computers in a safe and efficient manner., • Inspects operation of all facility equipment and reports malfunctions, and maintenance needs to ensure the safe and effective operation of all vascular access equipment., • Inspects operation of all facility operating systems, including temperature checks in appropriate areas and physical structure of the facility and reports any issues to the Facility Manager., • Ensures a clean, safe and sanitary environment in the vascular access facility at all times., • Ensures all blood spills are immediately addressed according to the organization/FMCNA Bloodborne Pathogen Control Policies. Administrative: • Assists with efficient utilization of medication, laboratory, inventory, supplies and equipment to achieve supply cost goals following all guidelines established in the organization formularies., • May assist in the development and revision of any applicable policies and procedures related to the facility to ensure continuous process improvement., • Assists with Continuous Quality Improvement (CQI) activities including monthly reports and attending meetings as required., • Assists with maintaining medication supply, including inventory control, checking for expired medications, and ensuring appropriate recording of controlled substances as required by law., • Completes usage logs for all medications with appropriate documentation, as well as, records of drug disposal in accordance with local, state, and federal law., • Assists with maintaining facility supply inventory, including ordering and restocking of supplies as needed., • Examines emergency equipment and supplies, including stocking of the crash cart on a regular basis., • Completes medical records in an accurate manner in compliance with organization policies and procedures prior to discharge of the patient. Perform chart audits on a regular basis., • May participate in facility regulatory and accreditation surveys and action plans to address any deficiencies., • Completes state required records for all implanted devices in an accurate and timely manner and in accordance with organization/FMS records management guidelines., • Participates in staff meetings, training and orientation as assigned., • Complies with HIPPA policies and standards regarding patient information and medical records., • Assist with various projects as assigned by direct supervisor., • Other duties as assigned. Physical Demands And Working Conditions: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Day to day work includes desk and personal computer work and interaction with patients, facility staff and physicians. The position provides direct patient care that regularly involves heavy lifting and moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. The position requires frequent prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to move, with assistance, patients and equipment of up to 200 lbs. There is a two-person assist program and material assist devices for the heavier items. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious, contagious diseases/materials and radiation. May be required to wear protective gear in procedure rooms for extended periods of time. Education: High School Diploma required; Associate's Degree desirable; and Bachelor's Degree strongly preferred. Graduate of an accredited School of Nursing (R.N.) Current appropriate state licensure and ACLS certification required. Experience And Required Skills: 4 - 6 years' related experience preferred. Office Based Surgical Center/Ambulatory Surgical Center/Vascular Access, Cardiac Cath Lab, or a combination of ASC, surgical, Interventional Radiology and ICU/CCU or emergency department experience preferred. Proficient in the use of computers and related software such as Microsoft Office is necessary. Proficient in IV insertion. Proficient in cardiac rhythm recognition. Experience with Medical database software. Certified in BLS & ACLS successfully completed course certifications. The rate of pay for this position will depend on the successful candidate's work location and qualifications, including relevant education, work experience, skills, and competencies. Hourly Rate: $40.19-$67.07 EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Children's Happy Teeth & Happy Braces is looking for a skilled and friendly Dental Assistant (DA) who shares our passion for creating positive experiences for patients and their families. Our practice has been a trusted leader in pediatric dental care since 2013, proudly serving children and their families with exceptional service. Our success is built on the dedication of our team, with a culture rooted in collaboration, compassion, and continuous growth. Here's why you'll love working with us: • Competitive Pay: Your talent deserves great rewards! We offer a salary that reflects your skills and experience along with performance-based bonuses., • Awesome Benefits: Our employees enjoy paid vacations, 401K, and medical/dental/vision coverage., • Room to Grow: Training, mentorship, and real career advancement await!, • Make a Difference: Your skills will play a key role in improving our young patients' smiles while creating a memorable experience each visit!, • Supportive Team Environment: Be part of a fun team that values collaboration and support. We work together to provide the best care for our patients. About the Role: As a Dental Assistant, you will work directly with dentists and patients to assist with dental procedures and ensure a smooth and efficient workflow in the office. You will play a critical role in helping patients achieve their best smile by assisting with dental procedures, providing excellent patient care, and supporting office operations. Responsibilities: • Create a warm and welcoming atmosphere, building trust with young patients and their families for a stress-free visit., • Educate children and their parents on proper oral care and the importance of regular dental checkups, making learning fun and accessible., • Take X-rays and complete coronal polishing, • Accurately maintain patient records, ensuring thorough charting and documentation., • Keep the clinical area well-organized, strictly following infection control protocols, such as regular sterilization of instruments, to maintain safety and hygiene., • Prepare treatment rooms prior to patient arrival by ensuring all necessary instruments and materials are ready and available. What We're Looking For: • Current Dental Assistant (DA) Certification: Radiation/CPR/Infection Control, • Availability to work on weekends, • Positive and friendly attitude Skills: • Excellent attention to detail, • Team Player, • Ability to work in a fast-paced environment., • Strong interpersonal skills, • Genuine enthusiasm for working with children and their families. Ready to Make a Difference? APPLY NOW!

Job Description COC Consulting is looking for a part-time phlebotomist in Long Beach, CA. The Phlebotomist ensures the proper collection, processing, labeling, storage, and mailing of blood and urine samples to the laboratory for testing. • Collects patient blood and/or urine specimens using established procedures, • Properly prepares collected specimens for testing and analysis, ensuring specimen integrity, • Verifies urine and blood test requisitions, • Identifies the patient before any specimen is obtained, • Labels and documents specimens to prepare for shipment, • Maintains daily tallies of collections performed, • Tracks and requests laboratory and office supplies needed to fulfill duties, • Provides site specific procedural training to new employees, • Maintains a safe, secure, and healthy work environment by following standards and procedures; complying with legal regulations; follow Universal Precautions and OSHA standards when handling specimens., • Strictly adheres to HIPAA regulations, • Travels to additional sites when needed, • Performs additional job duties as assigned MINIMUM QUALIFICATIONS, • High School Diploma, GED, or equivalent, • Phlebotomy certification from an accredited agency, • Computer and technology proficient, • Valid driver's license and car insurance, • Reliable transportation, • Ability to pass a background check, • A proven ability to handle ambiguity in the absence of defined systems and processes, • Minimum 2yrs experience or 1yr of hospital inpatient experience PHYSICAL REQUIREMENTS & WORK CONDITIONS, • Frequently required to lift, carry, push, and pull up to 20 pounds, • Frequently required to speak and hear, • Frequently required to sit or stand for periods of time and bend, stretch, and stoop, • Frequently required to use all types of vision, such as close vision and computer vision, • Frequently required to use hand dexterity for use of standard office and clinical equipment, • Varying schedule to include evenings, holidays, and/or extended hours as Company dictates, • Occasional exposure to various temperatures, • Frequent exposure to blood and bodily fluids, communicable diseases, chemicals, radiation, and repetitive motions BENEFITS, • Competitive salary, • Paid sick time, • Autonomous work, • A company with a huge vision, a dynamic work environment, and a team of talented, ambitious and fun to work-with colleagues! ABOUT THE COMPANY COC, Continuity of Care, is a leading provider of mobile phlebotomy and imaging services in the US. Operating in 14 states currently and expanding every month, COC is the largest non-lab owned mobile phlebotomy company on the West Coast. COC provides services to mental health centers, skilled nursing facilities, community care-based programs, local government outreach programs, workers compensation, dental offices, doctors' offices, and even in-home services. The company's relationships with local and national labs allow for our client/patient's samples to be processed quickly preventing any delays in care.

A career at Banfield means you'll find yourself working in the pet healthcare field alongside industry experts with a chance to make a difference in the lives of pets and the clients we serve through client education and effective communication. Work in a fun team environment that offers a clear career path you can pursue if continued growth and learning is your goal. Job Summary The Client Service Coordinator ("CSC") drives the flow of clients and pets through the hospital, maximizes the productivity of the veterinary medical team (in terms of numbers of clients and pets), ensures good communication with associates and clients, and coordinates the care of clients and pets in a happy, welcoming, friendly and efficient manner, influencing clients to return and refer their friends and families. Essential Responsibilities and Tasks • Live and exemplify the Five Principles of Mars, Inc. within self and team., • Actively recruit new clients by promoting hospital services and route the flow of clients and pets to ensure superior client care and maximum productivity of the veterinary medical team., • Maximize the number of pets seen by the hospital team through a productive and efficiently run hospital to support the needs of our wellness plan clients., • Provide professional, efficient and exceptional service at all times. This includes encouraging hospital visits, welcoming clients and pets, ensuring that they are comfortable in the hospital, and educating them about their pet's health., • Educate clients about Optimum Wellness Plans, preventative care, pet health needs and hospital services, • Assist incoming clients by completing the required documentation, entering all pet information and history in the computer, utilizing proper collars and tags for identification, and ensuring prompt service., • Assist outgoing clients by providing all necessary instructions, information and invoices, dispensing prescription items per the veterinarian's instructions, selling retail products and scheduling future appointments., • Manage the finances by maintaining accurate balances and utilizing proper opening and closing procedures., • Conduct administrative functions as necessary., • Other job duties as assigned. The Five Principles Every associate including the CSC has an important contribution to make to the veterinary team. We're looking for CSCs who are dedicated to their work, have a positive attitude and use our Five Principles: • Quality The consumer is our boss, quality is our work, and value for money is our goal., • Responsibility As individuals, we demand total responsibility from ourselves; as associates, we support the responsibility of others., • Mutuality A mutual benefit is a shared benefit; a shared benefit will endure., • Efficiency We use resources to the full, waste nothing and do only what we can do best., • Freedom We need freedom to shape our future; we need profit to remain free. Hiring Qualifications Competencies • Leadership, • Customer Focus, • Peer Relationships, • Integrity & Trust, • Action Oriented, • Listening, • Functional, • Preventative care and OWPs, • Communication Skills, • Client Service Skills, • Priority Setting, • Time Management Capabilities and Experience (can do) • Ability to multi-task- Manages multiple tasks at one time; quickly and accurately shifts attention among multiple tasks under distracting conditions without loss of accuracy or appearance of frustration., • Communication skills - Reads, writes and speaks fluent English, using appropriate grammar, style and vocabulary. Correctly spells commonly used English words and job specific terms. Demonstrates exceptionally strong written and verbal communication skills., • Organizational ability Demonstrates a systematic approach in carrying out assignments. Is very orderly and excels at cutting through confusion and turning chaos into order., • Problem solving skills - Demonstrates a strong ability to identify, analyze and solve problems. Translates problems into practical solutions., • Client service skills - Consistently ensures the team provides the client with attentive, courteous and informative service. Gains and shows personal satisfaction from delivering great service., • Intellectual ability - Accurately and consistently follows instructions delivered in an oral, written or diagram format. Can provide directions., • Mathematical ability - Ability to add, subtract, multiply and divide, and to compute rate, ratio and percent; ability to convert units of measurement., • Computer skills - Comfortably and confidently uses a computer and specialized software. Microsoft Word, Excel, Access, Outlook, etc. Attitudes (will do) • Initiative shows willingness and aptitude to use own discretion in taking appropriate steps in finding solutions to problems; presents options and ideas to enhance current processes or procedures. Takes on additional responsibility when both big and small tasks need to be done., • Integrity Firmly adheres to the values and ethics of Banfield Pet Hospitals. Exhibits honesty, discretion, and sound judgment., • Cooperativeness Willing to work with others, collaborating and compromising where necessary; promptly share relevant information with others., • Flexibility Is open to changing situations and opportunities and is willing to perform all tasks assigned., • Independence Able and willing to perform tasks and duties without supervision., • Tolerance for Stress / Resiliency Maintains a positive "can do" outlook, rebounds quickly from frustrations and unpleasantness, and maintains composure and friendly demeanor while dealing with stressful situations. Special Working Conditions • Ability to work at a computer for long periods of time., • Ability to be confident around pets (i.e., dogs, cats, birds, reptiles, etc.), • Client needs and work volume may often require more than 40 hours per week to complete essential duties of this job. This position requires special hours including working weekends and evenings., • Must have mental processes for reasoning, remembering, mathematics and language ability (reading, writing, and speaking the English language) to perform the duties proficiently., • The noise level in the work environment is moderately high., • Requires sufficient ambulatory skills in order to perform duties while at hospital., • Ability to stand, walk, stoop, kneel, crouch, and climb as well as manipulate (lift, carry, move) up to 50 pounds., • Requires good hand-eye coordination, arm-hand-finger dexterity with the ability to grasp, and visual acuity to use a keyboard and operate equipment., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Associate is routinely exposed to a variety of pets that may bite or scratch, and on occasion, exposed to anesthesia, radiation, biological hazards and medication/controlled substances. Experience, Education and/or Training • High School Diploma or equivalent preferred., • Must be at least 18 years old to perform duties involving radiography (x-ray) and exposure to radioactive substances., • One year of related experience required with customer service preferred., • Medical background (veterinary technician, human healthcare, pharmaceutical, etc.) with medical terminology training is preferred. We Are a Drug-Free, Smoke-Free, Equal Opportunity Employer Banfield Pet Hospital strongly supports and values the uniqueness of all individuals and promotes a work environment where diversity is embraced. Banfield Pet Hospital is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity and expression, age, genetic information, status as a protected veteran, or status as a qualified individual with disability. Banfield Pet Hospital complies with all applicable federal, state and local laws governing nondiscrimination in employment in every Banfield location. The pay range for this role is $16.93 - $21.63 Hourly. The pay range listed reflects a general hiring range for the area, with the specific rate determined based on the candidate's experience, skill level, and education, and may vary depending on location or applicable minimum wage laws. Here at Banfield, we prioritize your well-being and professional growth by offering a comprehensive total rewards package,

Inspired by faith. Driven by innovation. Powered by humankindness. CommonSpirit Health is building a healthier future for all through its integrated health services. As one of the nation's largest nonprofit Catholic healthcare organizations, CommonSpirit Health delivers more than 20 million patient encounters annually through more than 2,300 clinics, care sites and 158 hospital-based locations, in addition to its home-based services and virtual care offerings. As our Nuclear Med Tech, you will be a specialized healthcare professional, vital in providing diagnostic and therapeutic services through the precise application of radionuclides. Every day, you will expertly perform Nuclear Medicine procedures, utilizing radionuclides to produce high-quality images and data for licensed practitioners. You'll ensure appropriate patient care, recognize conditions essential for successful procedures, administer radiopharmaceuticals, operate equipment, and adhere to strict radiation safety. To be successful in this role demands current certification, advanced technical expertise, and an exceptional eye for detail, coupled with a thorough understanding of radiation safety. Your compassionate patient care and dedication to precise imaging will be essential. • Utilizes innovative customer service techniques to provide a positive patient care experience for the patient and their family., • Acts professionally in all dealings with internal and external customers to promote a working environment that focuses on the patient experience and not operational rivalries or roadblocks to care. Establishes and maintains lines of communication with all other staff members and radiologists to ensure an effective and harmonious working environment. Communicates effectively with patients and their families about the procedure to be performed in order to obtain information and to offer reassurance., • Coordinate and participate in a variety of technical procedures to include in vivo and in vitro studies; operate radiation detection and measurement instrumentation including stationary imaging devices, scintillation gamma and apparatus for in vitro counting., • Calibrate and draw up radiopharmaceutical materials for administration to patients; formulate radiopharmaceutical materials from pre-prepared kits. Calibrate instruments and review calibration data to detect trends indicating instrument malfunction. Calculate data to include results of patient studies and radioactive decay. Evaluate recorded images for technical quality., • Process computerized image data to include function curves and reconstructed SPECT images., • Perform Nuclear Cardiology studies including image acquisition, processing and monitoring patient vital signs. Perform EKG prep, tracing and monitors for obvious change during cardiac studies. Assist in a quality assurance program relating to calibration and maintenance of equipment. Assist with education and training. Job Requirements • At least one year full time work experience or clinical internship in an acute care setting., • Current Registration as a Nuclear Medicine Technologist with either ARRT or NMTCB, • Current Venipuncture Certificate, • Associate Degree Hiring/Sign-on bonus eligible Founded in 1923, Dignity Health - St. Mary Medical Center is a 389-bed, acute care, nonprofit hospital located in Long Beach, California. Serving over 50,000 patients annually, the hospital offers a full complement of services including a Level II Trauma Center, Level III NICU, heart care, and orthopedics. Additionally, St. Mary Medical Center has been recognized as an LGBTQ+ Healthcare Equality High Performer by the Human Rights Campaign Foundation. It is a Joint Commission-certified Thrombectomy-Capable Stroke Center and was named as a 2024-2025 High Performing Hospital for Heart Attacks by U.S. News & World Report. The hospital shares a legacy of humankindness with Dignity Health, one of the nation's five largest health care systems.

Radiologic technologists use diagnostic imaging equipment to help physicians identify illnesses and injuries. They may use x-ray equipment, computed tomography, magnetic resonance imaging, or mammography to perform X-rays, CT scans, MRIs, or mammograms. Radiologic technologists can also specialize in specific areas of the radiology field such as magnetic resonance imaging (MRI), sonography, mammography, computed tomography (CT), nuclear medicine, and radiation therapy. Radiologic Tech's generally work in a hospital setting. Associate Degree in radiologic technology is generally required Valid state Radiologic Technologist license required Registered as an ARRT is sometimes required *Per Diem Shifts Available Recent Experience Required

Supports the Organization's mission, vision, core values and customer service philosophy. Adheres to the Organization's Compliance Program, including following all regulatory and policy requirements. Assists physicians in performing a variety of interventional radiology procedures. Responsible for the operation and quality control of the radiological equipment in accordance with the Organization's policies, procedures, and training. Assists with the inventory and supply management. • Performs various activities necessary for the preparation of the patient and the procedure room for the radiology procedures in compliance with the organization's policies and procedures and state and federal regulations., • Reviews patient specific procedure orders to determine materials/supplies that will be needed., • Sets up/ stocks the procedure room/procedure trays with all needed supplies and interventional equipment prior to procedure and cleans procedure room post procedure, including but not limited to cleaning of equipment/machinery., • Conducts all necessary preparations of the patient procedure room and documents when appropriate., • Explains procedure to the patient, answers questions and addresses patient concerns., • Assists with preparing the patient for the surgical procedure by positioning, shaving and prepping., • Performs patient transfers and transports patient to and from procedure room., • Inputs patient data into the C-Arm., • Acts as scrub assistant assisting the physician during interventional procedures and administers fluoroscopy to enable the physician to see flow through the blood vessels to identify areas in need of intervention while maintaining a sterile technique according to the established company policies and procedures and state and federal regulations., • Complies with HIPPA policies and standards regarding patient confidentiality., • Draws up intravenous medication and labels as per the organization's medication labeling policy., • Processes x-ray images and archives to the image repository, CD or DVD to comply with the organization's policies and procedures for patient medical records and state regulations., • Provides outstanding quality of patient care by supporting and driving the organization's quality standards through meeting regulatory requirements and the practice of Continuous Quality Improvement (CQI), including use of CQI tools., • Assists with implementing the organization's quality goals and facility specific action plans to achieve the organization's quality standards., • Ensures medical records are accurate, complete and in compliance with the organization's policies and procedures. Maintains integrity of medical records, filing paperwork in patient files according to policies and procedures and performing audits on a regular basis., • Assists with maintaining environmental integrity and aesthetics. Ensures all areas are clean, sanitary, and safe daily Ensures all facility equipment and instruments are in proper working condition by inspecting equipment daily before and after procedures., • Makes recommendations regarding replacement of equipment and repairs., • Assists with disposal of hazardous waste materials, dirty linen, and rugs., • Prepares, organizes, and efficiently utilizes supplies and equipment to prevent waste., • Attends and participates in Governing Body, assisting with meeting agenda and gathering of data/material for meetings., • Ensures effective communication with physicians., • Attends and participates in CQI meetings with physicians, reporting on assigned topics., • Works with the physicians and staff to ensure all necessary instruments and equipment are on hand., • Addresses physician concerns in areas of responsibility., • Assists in training and orienting new employees., • Ensures patient billing is accurate and timely by reviewing all procedures, documenting patient equipment charges, and verifying CPT and ICD9 codes are correct., • Assists with inventory, ordering of supplies and re-stocking of supplies., • Acts as Radiation Safety Officer; monitors radiation badges and conducts in-services regarding radiation safety., • Participates in all facility regulatory and accreditation surveys and action plans to address any deficiencies identified., • Other duties as assigned., • The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. Must be able to lift, push and pull up to 50 pounds and to perform patient transfers and positioning of patients up to 400 pounds. Must be able to stand in a protective apron for up to 45-60 minutes., • 10% Travel., • None, • High School Diploma required; Associate's Degree desirable; and Bachelor's Degree strongly preferred., • Current ARRT Certification and/or State Licensure (as per state regulations), • Interventional Radiology certificate preferred., • 4 6 years' related experience desirable., • 1 year experience preferred for Candidates with ARRT., • Working knowledge of interventional equipment (including C-Arm and Ultrasound equipment)., • Experience with interventional procedures, using/ordering/maintaining required materials/supplies for each procedure., • Knowledge and experience of sterile techniques., • Knowledge of universal precautions and personal protective devices to be utilized when operating radiology systems., • Successfully complete BLS certification., • Experience with monitoring and maintaining inventory., • Proficient in the use of computers and related software such as Microsoft Office (Word & Excel). The rate of pay for this position will depend on the successful candidate's work location and qualifications, including relevant education, work experience, skills, and competencies. Hourly Rate: $37 - $62 Benefit Overview: This position offers a comprehensive benefits package including medical, dental, and vision insurance, a 401(k) with company match, paid time off, parental leave and potential for performance-based bonuses depending on company and individual performance. Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws.

The Ortho Dental Assistant performs a variety of dental assisting duties while promoting a safe and clean environment for providing quality dental care. These duties include, but are not limited to, assisting the doctor; communicating effectively with patients (or parents if patient is a child); maintaining equipment and inventory; cleaning, sterilizing, and packaging instruments; and following universal precautions, OSHA requirements, and dental board auxiliaries' regulations. Ortho Assistant travels with the Orthodontist Team to multiple locations within the region. Essential duties/Responsibilities • Open and close the back office as instructed, • Prepare trays and operatories for various procedures, • Ensure that operatories are stocked and cleaned at all times, • Greet and seat patients as soon as possible and notify Doctor (check the operatory to make sure it is clean and disinfected before seating a new patient), • Check for patients' signatures on the Health Questionnaire and Informed Consent Form, • Assist the Doctor's during various procedures and rotate with Doctor's as requested; in accordance to all State and Federal regulations, • Accurately /completely document patient care activities in the chart as directed by the doctor and Company policy, • Explain treatment plans to patients as needed, • Escort patients to front office area for patient dismissal when treatment is completed, and inform the receptionist when and for what their next visit(s) must be scheduled, • Disinfect general back office areas; including operatory, • Apply all-wrap in and around operatories where needed, • Clean, sterilize, and package dental instruments, • Prepare lab cases, • Turn off all equipment nightly, including the vacuum, compressor, etc., • Ensure that handpieces are properly cleaned and oiled, • Follow-up with lab and maintain the log on partials and remakes., • Check next day appointment schedule for all lab cases and verify that they are ready, if not, see that the patient is rescheduled, • Review the Hazard Communication book and sign the training log, • Ensure that hazardous products are properly labeled, • Follow waste disposal procedures for Sharps and for contaminated material/chemical., • Wear protective barriers (face shield mask, gloves, and gown), • Ensure proper sterilization and infection control guidelines are utilized, • Attend and participate in staff meetings and team huddles, • Other duties as assigned by the Office Manager, Regional Manager, and/or Dentists Knowledge, skills, and abilities • Minimum one year of recent experience as a Ortho Dental Assistant preferred, • Current X-ray License required, • Certificate from accredited Dental Assisting School preferred, • Bilingual: English & Spanish required (if the geographic location of the office does not require the applicant to be bilingual, applicants who only speak English may be considered), • CPR and First-Aid certification preferred, • Infection Control Certificate required, • Strong written and verbal communication skills, • Ability to work with people of all ages (i.e. Children), • Strong interpersonal and relationship skills, • Ability to work in a fast paced environment and able to multitask, • Ability to maintain outgoing, friendly attitude with patients and coworkers, • Ability to work with interruptions and to manage multiple priorities, • Ability to work with minimal supervision, • Ability to be organized Technological Skills • Autoclave/Chemiclave, • Ultrasonic, • Intra-oral Camera, • O 2 and N 2 O, • Handpieces, • Digital X-ray and X-ray Machine Work Schedule The Ortho Dental Assistant will be notified of the work schedule on a weekly, bi-weekly, or monthly basis. The Ortho Dental Assistant's schedule is subject to change (daily/weekly hours may increase or decrease) according to the needs of the practice. Evening and weekend hours may be required. This position is paid on an hourly basis. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to stand, sit, and walk; talk, hear, and smell; and use hands, fingers, and wrists (manual dexterity and hand-eye coordination) to handle or feel the mouth/teeth and gums of patients, as well as objects, tools, or controls associated with the dental field. The employee is frequently/occasionally required to reach; lift and/or move up to 25 pounds; and balance, stoop, bend, squat, kneel, crawl, climb, twist, pull, and crouch. The essential functions of this position will result in the following: hazardous exposure (chemical and infections)constantly; non ionizing radiation (welding flash, microwaves, sun, etc.)frequently; radiation (x-ray, radioactive, isotopes, etc.)constantly; noise (loud/repetitive, 85 decibels per OSHA standard)constantly; and personal protective equipment (PPE: respiratory masks, latex gloves, face shields, etc.)constantly. Work Conditions and Risk General Dental Office conditions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The dental office environment may result in employees being exposed to toxic chemicals, radiation, infectious bodily fluids and materials, and increased noise level. This position assumes high risk. Independent Action Under the general supervision of the Office Manager, regular duties performed by the Ortho Assistant may require occasional independent judgment. The Ortho Assistant must consult with her/his supervisor regarding patient problems or confrontation, policy issues, expenditures, and unusual problems. Limitations and Disclaimer The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, skills, and physical demands required for the position. This job description is subject to possible modification to reasonably accommodate disabled individuals. Some requirements may exclude individuals who pose a direct threat or significant risk to health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by anyone occupying this position. Employees are required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with State and Federal laws. The job requirement represents the minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the employee must possess the abilities to perform each duty proficiently. Continued employment remains on an "at-will" basis.

Now is the time to join The Dental Office of Carson. You will have opportunities to learn new skills from our team of experienced professionals. If you're ready to take your career to the next level and gain valuable experience, apply today! • Learn and perform basic dental assisting functions in accordance with the applicable state's Dental Auxiliaries Table of Permitted Duties under the direct supervision of the licensed dentist, • Actively participate in the Perfect Patient Experience by learning how to keep patients focused on optimal treatment while attending to their individual needs and concerns, • Learn how to effectively complete proper infection control procedures for both the sterilization and operatory cleaning and disinfection processes to ensure the safety of both patients and team members, • Complete radiographs and intra-oral pictures at the direction of the dentist only after the DAT has completed all state requirements regarding radiation safety, • Learn how to prepare for patient care procedures and execute through the process efficiently from preparing the patient, proper procedure tray preparation, providing basic supportive chairside support and ensuring the patient is handed off to the front desk for follow up visit appointment, • Instruct patients on postoperative and general oral health care as directed by the dentist, • Record patient charting and treatment notes in the digital patient chart as directed by the dentist, • Support patient care by presenting treatment record, consents and health history to the dentist prior to patient treatment, • Maintain strict compliance with State, Federal, and other regulations, (e.g., OSHA, WC, Dental Board, HIPAA, ADA, DOL, HR policies and practices), • No prior dental experience is required, • Customer services experience is preferred, • Medical, dental and vision insurance, • Continuing Education (CE Units), • Paid time off, • Tuition Reimbursement, • Child care assistance, • 401K, • Paid time to volunteer in your local community, • Shift premium pay for eligible roles who work weekends PDS Health is an Equal Opportunity Employer. We celebrate diversity and are united in our mission to create healthier and happier team members. Salary Information: $17.25-$24.25 / Hourly

Your new home - a waterfront playground in the heart of Southern California - Long Beach The Community Long Beach, CA Long Beach is a waterfront playground located right in the heart of Southern California. Here you can experience it all: a deep-sea adventure at the Aquarium of the Pacific, whale watching on the water, shopping in one of the city's many unique districts, a tour of coastal breweries, a vibrant foodie scene, and so much more! This city is known for its waterfront attractions, including the permanently docked RMS Queen Mary and the Aquarium of the Pacific. Long Beach also hosts the Grand Prix of Long Beach as well as the well-known Long Beach Pride Festival and Parade. California State University Long Beach, one of the largest universities in California by enrollment, is housed here as well. Modern and contemporary works are on display at the Museum of Latin American Art and Rancho Los Cerritos, a 19th-century adobe home and museum set in expansive gardens. Learn more about Long Beach ! Airport Information: Your best bet in this department to get to Long Beach would be the LAX the Los Angeles International Airport, which is a short 17 miles away from Long Beach and offers an average of nearly 700 daily nonstop flights to 113 different locations worldwide. Learn more about this airport here! The Facility VA Long Beach Healthcare System The VA Long Beach Healthcare System provides you with outstanding health care, trains America's future health care providers, and conducts important medical research. The VA Long Beach Healthcare System is one of the leading health care systems serving Veterans in the VA Desert Pacific Network. The VA Long Beach Healthcare System serves the health care needs of more than 50,000 Veterans in and around Long Beach, California. Location: 5901 E 7th Street, Long Beach, CA 90822 The Chief Medical Physicist shall provide quarterly Quality Assurance reports for the Quality Assurance Committee and Radiation Safety Committee, as well as attend quarterly Radiation Safety Meetings. Shall track, evaluate, and document all equipment-related quality assurance data including TLD and credentialing measurements for independent 3rd party analysis. Shall also provide shielding surveys and reports as required by the National VA Health Physics Program. Shall be responsible to ensure licenses are current for the linear accelerator equipment. Shall also be responsible to ensure Radiation Oncology Service has appropriate licenses for users of all our software applications. Shall also be responsible for ensuring continuity of medical physics operations including communication among key personnel. Shall develop, implement, supervise, and periodically review all QMP policies and procedures that pertain to radiation therapy equipment. Is also responsible for the design, implementation, and periodic review of all aspects of the QMP that involve the use of radiotherapy equipment. Will oversee the technical activities of all other physicists, dosimetrists, and other staff members assigned to the unit; directs the technical aspects of treatment procedures; and performs duties qualifying them as supervisor. Will not perform administrative oversight of federal employees. Education: Must have a PhD degree in Medical Physics Must have at least 5 years of experience Performing QA procedures 3 years experience in Therapeutic Medical Physics in a healthcare system that is ACR or APEx certified 3 years experience with Varian Linear Accelerators: TrueBeam with Brain Lab Accessories following standards of TG-142 3 years experience with Image Guided Radiation Therapy (IGRT) including Cone Beam CT 3 years experience with Eclipse treatment planning system; and ARIA record and verify system, including the following treatment modalities: 2D/3D Conformal, SRS, SRT, SBRT, and IMRT/VMAT 3 years experience IMRT QA: MApCheck (or equivalent) 3 years experience Client Discovery CT Simulator (or equivalent) 3 years experience using Superficial X-ray Machine Successfully performed one acceptance testing on a linear accelerator Successfully performed one commission of a linear accelerator for a treatment planning system Board Certified in Medical Physics or Therapeutic Medical Physics by the American Board of Radiology KurzSolutions is committed to improving health outcomes by providing well-managed companies with the top healthcare talent in the market. KurzSolutions is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided based on qualifications, merit, and business need.

The VA Long Beach Healthcare System provides outstanding health care, trains America's future health care providers, and conducts important medical research. The VA Long Beach Healthcare System serves the health care needs of more than 50,000 Veterans in and around Long Beach, California. Location: 5901 E 7th Street, Long Beach, CA 90822 • The therapeutic radiologic technologist shall receive and interpret prescriptions/instructions from the treating physician and carry out complex assignments while under general supervision of the supervisory radiation therapist., • The technologist shall prepare imaging, simulation, treatment, and ancillary equipment for patient use. This involves recording a series of measurements, including checks of the radiation field, to ensure basic specifications are met daily., • The technologist shall maintain appropriate markings on the patient's skin to facilitate exact positioning for desired results and cushions/shields patients as appropriate. Procedures will be explained to patients, securing the confidence and cooperation of patients, and explaining procedures while following ALARA principles., • Will operate imaging/sealed radiation equipment., • Shall limit radiation field using lead cutouts or multi leaf collimation (MLC). May assist radiation oncologists with bolus design according to physician's direction., • Shall position patients in the CT scanner and acquire specific data sets prescribed by the physicist or physician. Acquires the necessary tumor volume to be used in treatment planning. Gives the CTS to the radiation Oncologist for tumor volumes to be outlined. Shall set technical factors for radiotherapy procedures, and will set up and operate accessory equipment., • Will perform timeout procedure and positively identify each patient before providing treatment., • The technologist will operate the simulator and take high quality radiographs to accurately localize tumor volume as required., • Shall accomplish portal filming, localizing topographical landmarks. We'll instruct accurate contours of the patient's body and perform necessary measurements utilized by the physicist., • Must be a graduate of an approved program in Therapeutic Radiologic Technology, evidenced by certification through the ARRT in (T) radiation therapy., • 1 year of experience knowledge of overall characteristics and clinical relevance of radiation oncology treatment machines and equipment., • 1 year of experience delivery of prescribed therapeutic radiation for cancer and abnormal cell growth treatments., • 1 year of experience three-dimensional conformal radiation therapy (3D CRT), intensity-modulated radiation therapy (IMRT), image-guided radiation therapy (IGRT)., • 1 year of experience Education and expertise necessary to generate radiation dose distribution and dose calculations in collaboration with the medical physicist and radiation oncologist. KurzSolutions is committed to improving health outcomes by providing well-managed companies with the top healthcare talent in the market. KurzSolutions is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided based on qualifications, merit, and business need.