Radiation jobs in Torrance, CaliforniaCrear alertas

The Good Life MedStaff is seeking a travel Interventional Radiology Technologist for a travel job in Inglewood, California. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Position Overview: An Interventional Radiology Technologist (IR Tech) is a specialized radiologic technologist who assists in minimally invasive procedures that use imaging guidance, such as X-rays, CT scans, MRI, or ultrasound, to perform diagnostic and therapeutic interventions. IR Techs work closely with radiologists, surgeons, and other healthcare professionals to provide optimal patient care. Key Responsibilities: Patient Preparation: Verify patient identity and procedure to ensure accuracy. Prepare patients for procedures, explaining the process and alleviating any concerns. Assess patient medical history to ensure safety during procedures. Position patients correctly for imaging. Imaging and Procedure Assistance: Operate imaging equipment (X-ray, CT, MRI, ultrasound) during procedures to assist the medical team in real-time. Adjust imaging equipment settings to ensure optimal image quality. Assist in the sterile setup and maintenance of equipment during procedures. Document imaging and procedure details, including patient data and technical parameters. Equipment Maintenance and Sterilization: Clean, sterilize, and maintain equipment used in interventional procedures. Ensure that all necessary supplies and tools are available before procedures. Troubleshoot and report malfunctioning equipment. Clinical Support: Assist in post-procedure care and monitoring of patients. Prepare and administer contrast agents as directed by the physician. Monitor patient vital signs during the procedure. Collaborate with the healthcare team to ensure patient safety and comfort. Compliance and Documentation: Ensure compliance with safety regulations, including radiation protection. Follow institutional policies and procedures. Maintain accurate records of procedures and patient outcomes. Ensure all patient confidentiality and HIPAA guidelines are followed. Continual Learning: Stay current with new techniques and technologies in interventional radiology. Participate in continuing education and training programs. Required Qualifications: Completion of an accredited radiologic technology program. Certification in radiologic technology (RT) by the American Registry of Radiologic Technologists (ARRT). Additional certification in Interventional Radiology (IR) preferred (e.g., ARRT(IR)). Basic Life Support (BLS) certification. Strong attention to detail and ability to handle stressful situations. Ability to work in a fast-paced and team-oriented environment. Licensure and Certification Requirements by State: The requirements for licensure and certification for an Interventional Radiology Tech vary by state. Below are some general guidelines: States that require certification and/or licensure: California: Requires state licensure for radiologic technologists. IR certification is also required for certain advanced practices. Florida: Requires licensure from the Florida Department of Health for radiologic technologists, with additional certification in Interventional Radiology often preferred. New York: Requires licensure for radiologic technologists by the New York State Department of Health, and specific IR credentials may be needed for certain tasks. Texas: Requires state licensure through the Texas Medical Board for radiologic technologists. Massachusetts: Requires licensure by the Board of Registration in Medicine for radiologic technologists, and IR-specific certification may be beneficial. States with voluntary or less restrictive requirements: Some states, such as Arizona and Michigan, may not have strict licensure requirements for radiologic technologists, but professional certification (e.g., ARRT) is often preferred or required by employers. Note: Certification requirements may be updated regularly, and individual states may have different guidelines for IR Techs regarding their scope of practice. It is essential for IR Technologists to be aware of state-specific rules and keep their credentials up to date. The Good Life MedStaff Job ID #35606643. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology:IR Tech (Interventional Radiology),06:00:00-14:00:00 About The Good Life MedStaff We are a Travel Nursing Agency, connecting compassionate caregivers, who love adventure, with amazing opportunities. We want to bring you to The Good Life! Connecting, Caring, and Competing for the best opportunities to help you reach your goals! Benefits • Medical benefits, • Dental benefits, • Vision benefits, • 401k retirement plan, • Referral bonus

Job Description JOB ID: SS1610CT Position: CT Technologist Location: Inglewood, CA 90301 Shift : All shifts .Monday thru Friday Start date: ASAP Pay Rate: $68-$72 per hour Job Summary: We are seeking an experienced and detail-oriented CT Technologist to join our imaging team in Inglewood, CA 90301. The ideal candidate will perform high-quality CT scans while ensuring patient safety, comfort, and adherence to all departmental protocols. Responsibilities: • Perform CT procedures as ordered by physicians following established protocols., • Ensure accurate patient positioning and image quality., • Maintain and operate CT equipment safely and efficiently., • Verify patient identification and review medical history prior to imaging., • Administer contrast media as required, following safety standards., • Collaborate with radiologists and other healthcare professionals to ensure optimal patient care., • Maintain accurate documentation and patient records in the PACS/RIS system., • Adhere to all infection control, radiation safety, and compliance guidelines. Qualifications: • ARRT (R)(CT) certification required., • Valid California CRT and fluoroscopy license (if applicable)., • BLS certification (AHA) required., • Minimum 12 years of recent CT experience preferred., • Excellent communication, technical, and patient care skills. Precision Scans is an equal-opportunity employer, committed to cultural diversity. Precision Scans will provide equal consideration for employment to all qualified applicants without regard to their race, religion, ancestry, national origin, sex, sexual orientation, age, disability, marital status, domestic partner status, or medical condition.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Power Electronics Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge power electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior level, you will be tasked with full-stack power electronics development. You will have the opportunity to start at concept development and progress through detailed design, analysis, board layout, testing, and delivery, doing hands-on work at each phase. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of power converters, and power management and control circuits, from concept and architecture definition to schematic, printed circuit board (PCB) design, testing, qualification, production transition and production support., • Perform detailed and complete schematic design for low to high complexity power electronics designs , ranging from single power converters to mukti-output power supply modules and power management circuitry., • Perform detailed PCB layout in Altium Designer independently or in collaboration with a PCB Drafter., • Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis, stress analysis, small signal and stability analysis, power loss and efficiency optimization analysis, and power integrity analysis., • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs., • Perform bring-up and design verification testing of power electronics circuits and modules, often working with a technician or junior engineer to complete design verification., • Collaborate with multi-discipline engineering team and lead system integration and qualification campaigns, and release analog and power electronics designs to production., • Mentor junior engineers to build technical understanding and foster professional development of team., • Perform research and keep up with new power electronics technology and industry trends to drive innovation and generation of intellectual property.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 6 years of industry or university research experience in board-level power electronics design, analysis, and test., • Experience owning the design phase of power electronics or power subsystems, including power architecture and requirements definition, trade studies, power converter and analog electronics design, component selection, and detailed design., • Experience performing or guiding complex PCB layout for analog and power electronics., • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, or MathCAD, • Strong laboratory testing and troubleshooting experience for prototyping, design verification testing and qualification of analog and power electronics hardware., • Direct experience designing high-reliability electronics for automotive, space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience delivering subcircuit or board designs to production and deployment., • Proficiency in printed circuit board design tools such as Altium, OrCAD/Allegro, PADS/Xpedition, or similar., • Experience running board-level power integrity simulation tools such as Ansys SiWave, ADS SIPro, or HyperLynx.

Job DescriptionDescriptionAs a Solar Array Test Engineer at Impulse, you will play a critical role in designing, planning, and executing testing of solar array systems and subassemblies. This role owns test development from requirements through data review, focusing on electrical performance, mechanical integrity, environmental durability, and flight readiness. You’ll work closely with solar array design, power electronics, systems engineering, and manufacturing teams to ensure robust, compliant, and high-performing solar hardware. Responsibilities • Define and execute electrical performance tests for solar arrays, including I-V characterization and efficiency measurements, • Plan and run environmental and durability tests such as thermal cycling, UV exposure, vibration, or shock as applicable, • Develop test plans and procedures from system and component requirements, including acceptance criteria, • Design, build, and validate test fixtures, harnessing, and high-power setups, • Partner with design, manufacturing, and suppliers to close test gaps and improve reliability and performance, • Participate in anomaly troubleshooting, root-cause investigations, and re-test plans Minimum Qualifications • B.S. in Electrical, Mechanical, Aerospace Engineering, or related field, • 3+ years of direct experience in hardware test engineering, • Working knowledge of photovoltaic behavior, electroluminescence, and solar array performance drivers, • Experience with electrical and thermal instrumentation and DAQ systems, • Familiarity with environmental and mechanical test methods and lab safety practices, • Strong data reduction and analysis skills in Python, MATLAB, or similar, • Clear communicator with solid technical documentation skills Preferred Skills and Experience • Master’s degree in a relevant engineering discipline, • Direct experience testing solar arrays or photovoltaic hardware, • Familiarity with PV and aerospace qualification standards relevant to solar array testing, including IEC, UL, MIL-STD, NASA, and ECSS standards, • Experience with thermal-vacuum testing, radiation or UV degradation testing, or arc-fault characterization, • Demonstrated ability to drive cross-functional closure of test anomalies and design improvements Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Must be IV Certified!!!!!!!!!!!!!! Position Summary The Dental Assistant performs a variety of dental assisting duties while promoting a safe and clean environment for providing quality dental care. These duties include, but are not limited to, assisting the doctor; communicating effectively with patients (or parents if patient is a child); maintaining equipment and inventory; cleaning, sterilizing, and packaging instruments; and following standard universal precautions, OSHA and HIPAA requirements, and dental board auxiliaries’ regulations. Essential duties/Responsibilities • Open and close the back office as instructed, • Prepare trays and operatories for various procedures, • Ensure that operatories are stocked and cleaned at all times, • Greet and seat patients as soon as possible and notify Doctor (check the operatory to make sure it is clean and disinfected before seating a new patient), • Check for patients’ signatures on the Health Questionnaire and Informed Consent Form, • Assist the Doctor’s during various procedures and rotate with Doctor’s as requested; in accordance to all State and Federal regulations, • Accurately /completely document patient care activities in the chart as directed by the doctor and Company policy, • Explain treatment plans to patients as needed, • Escort patients to front office area for patient dismissal when treatment is completed, and inform the receptionist when and for what their next visit(s) must be scheduled, • Disinfect general back office areas; including operatory, • Apply disposable barriers in and around operatories where needed, • Clean, sterilize, and package dental instruments, • Prepare lab cases, • Turn off all equipment nightly, including the vacuum, compressor, etc., • Ensure that handpieces are properly cleaned and oiled, • Follow-up with lab and maintain the log on partials and remakes., • Review the Hazard Communication book and sign the training log, • Ensure that hazardous products are properly labeled, • Follow waste disposal procedures for Sharps and for contaminated material/chemical., • Compliance with state and Federal infection control standards in the dental office and operatories, including but not limited to: wearing protective barriers such as gloves, scrubs, and eye wear; disinfecting and sterilizing instruments and treatment areas; and disposing properly of contaminated or bio-hazardous waste/materials. Other duties and Requirements • Follow-up with lab and maintain log on partials and remakes., • Check next day appointment schedule for all lab cases and verify that they are ready, if not, see that the patient is rescheduled, • Attend and participate in staff meetings and team huddles, • Other duties as assigned by the Office Manager, Regional Manager, and/or Dentists Knowledge, skills, and abilities • Minimum one year of recent experience as a Dental Assistant preferred, • Current X-ray License required, • Certificate from accredited Dental Assisting School preferred, • Bilingual: English & Spanish required (if the geographic location of the office does not require the applicant to be bilingual, applicants who only speak English may be considered), • CPR and First-Aid certification preferred, • Infection Control Certificate required, • Strong written and verbal communication skills, • Ability to work with people of all ages (i.e. Children), • Strong interpersonal and relationship skills, • Ability to work in a fast paced environment and able to multitask, • Ability to maintain outgoing, friendly attitude with patients and coworkers, • Ability to work with interruptions and to manage multiple priorities, • Ability to work with minimal supervision, • Ability to be organized Technological Skills • Autoclave/Chemiclave, • Ultrasonic, • Intra-oral Camera, • O2 and N2O, • Handpieces, • Digital X-ray and X-ray Machine Work Schedule The Dental Assistant will be notified of the work schedule on a weekly, bi-weekly, or monthly basis. The Dental Assistant’s schedule is subject to change (daily/weekly hours may increase or decrease) according to the needs of the practice. Evening and weekend hours may be required. This position is paid on an hourly basis. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to stand, sit, and walk; talk, hear, and smell; and use hands, fingers, and wrists (manual dexterity and hand-eye coordination) to handle or feel the mouth/teeth and gums of patients, as well as objects, tools, or controls associated with the dental field. The employee is frequently/occasionally required to reach; lift and/or move up to 25 pounds; and balance, stoop, bend, squat, kneel, crawl, climb, twist, pull, and crouch. The essential functions of this position will result in the following: hazardous exposure (chemical and infections)—constantly; non ionizing radiation (welding flash, microwaves, sun, etc.)—frequently; radiation (x-ray, radioactive, isotopes, etc.)—constantly; noise (loud/repetitive, 85 decibels per OSHA standard)—constantly; and personal protective equipment (PPE: respiratory masks, latex gloves, face shields, etc.)—constantly. Work Conditions and Risk General Dental Office conditions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The dental office environment may result in employees being exposed to toxic chemicals, radiation, infectious bodily fluids and materials, and increased noise level. This position assumes high risk. Independent Action Under the general supervision of the Office Manager, regular duties performed by the Dental Assistant may require occasional independent judgment. The Dental Assistant must consult with her/his supervisor regarding patient problems or confrontation, policy issues, expenditures, and unusual problems. Dental Assistants are not to perform expanded functions, which are not permissible by the Dental Practice Act, even if asked to do so by the doctor. If a Dental Assistant is asked by the doctor to perform functions for which she/he is not permitted by the Dental Practice Act, she/he must inform the Floor Supervisor, Office Manager, Managing Doctor, or the Regional Manager as soon as possible. (See Policy on “Expanded Functions”) Dental Assistants are not to diagnose patients. This is the Doctor's responsibility. Employees found doing so will be subject to disciplinary action up to, and including, termination. Limitations and Disclaimer The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties, skills, and physical demands required for the position. This job description is subject to possible modification to reasonably accommodate disabled individuals. Some requirements may exclude individuals who pose a direct threat or significant risk to health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by anyone occupying this position. Employees are required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with State and Federal laws. The job requirement represents the minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the employee must possess the abilities to perform each duty proficiently. Continued employment remains on an “at-will” basis.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. Stay Connected with K2 Space for Future Job Openings Across Engineering We're on a mission to push the boundaries of what's possible in space systems and large-scale satellite platforms. Even when we don't have a specific opening listed, we're always eager to connect with innovators, builders, and problem-solvers who share our passion for making space more accessible. This is not a job application—it's a way for you to raise your hand and say, "Keep me in the loop." By joining our talent community, you'll: * Receive occasional updates about K2 Space projects, milestones, and future opportunities. * Be among the first to know when a role opens that might align with your skills and interests. * Stay engaged with our growing network of space enthusiasts and professionals. Who Should Join We welcome anyone excited about space technology and exploration—engineers, operators, mission designers, business minds, creatives, and everyone in between—who want to be part of K2 Space's journey. How to Join * Fill out our brief interest form below. * Share a resume and a quick note about your skills, passions, or areas of interest. * We'll keep you on our radar for future opportunities and updates. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Acquisition, Tracking & Pointing Engineer, you will lead the development of the pointing and tracking subsystem for our FSO laser communication terminal. You will design the algorithms and controls (both software and hardware). This is a hands-on role blending optics, sensors, and control theory – you’ll be architecting the pointing control loops, selecting sensors (cameras, trackers, IMUs), and coding or configuring the real-time control software/FPGA. You will have broad autonomy to define the PAT architecture and will be the go-to expert for optical pointing and tracking, with the opportunity to grow a team as our FSO programs expand. This role is on-site and will interface heavily with the optical, photonics, and modem teams to ensure an integrated design. Responsibilities • Own the end-to-end pointing, acquisition, and tracking (PAT) architecture for the FSO system. Develop pointing budgets that account for spacecraft attitude dynamics, thermal drift, and atmospheric disturbance, and allocate error to subsystems (gimbal, fine steering mirror, sensors). Define the control system requirements (bandwidth, stability, accuracy) needed to achieve sub-µrad pointing stability., • Design and implement algorithms to acquire transmitter and rapidly and maintain lock. This includes search strategies (spiral scans, beacon acquisition sequences), tracking filters (Kalman or extended Kalman filters for sensor fusion), and loss-of-signal recovery strategies. Develop software and/or FPGA logic for real-time centroiding of acquisition camera images and tracking detector signals (quad cells or position sensing devices)., • Develop the control loops for fast steering mirrors (FSM) or precision actuators to actively suppress jitter and beam wander. Integrate IMU data and other inertial references to feed-forward or stabilize line-of-sight pointing. Tune closed-loop controllers to mitigate disturbances (reaction wheels, vibration) and atmospheric tilt errors, achieving residual pointing error within the link budget., • Hardware-In-the-Loop (HIL) Testing: Build a testbed to validate PAT performance, including hardware-in-loop simulations. For example, set up a dynamic optical simulator with a movable target, turbulence phase screens, and a real-time controller. Test the acquisition time and tracking robustness under varying conditions (simulated satellite motion, atmospheric turbulence levels) and iterate on algorithms as needed., • Bachelor’s or Master’s in Aerospace Engineering, Controls/Electrical Engineering, Applied Physics or similar field., • 5+ years of experience working on pointing, tracking, or guidance/control systems (such as satellite attitude control, gimbal systems, or optical tracking systems)., • Strong foundation in control theory and signal processing. Experience designing and tuning feedback control loops (PID, state-space, Kalman filters) for high-precision systems. Knowledge of sensor fusion and state estimation (e.g. IMU integration with optical trackers)., • Understanding of optical pointing mechanisms – experience with gimbals, fast steering mirrors, precision opto-mechanical actuators or similar hardware. Ability to analyze pointing errors, jitter spectra, and to create pointing error budgets accounting for on-orbit behaviors., • Proficiency in programming for algorithm development and real-time implementation. This could include MATLAB/Simulink or Python for modeling, and C/C++ and/or HDL (VHDL/Verilog) for implementing algorithms on real-time processors or FPGAs. Hands-on experience with implementing control algorithms in embedded systems or FPGAs is highly desirable., • Experience setting up experiments or test rigs for control systems (motion platforms, optical setups, etc.). Comfortable with data acquisition and analysis of system performance (using tools like Python, MATLAB). Demonstrated ability to troubleshoot complex hardware/software systems in a lab or field environment. Preferred Skills and Experience • Spacecraft or Aerospace GNC: Direct experience with spacecraft attitude determination and control systems or optical payload pointing is a strong plus. Familiarity with how satellite AOCS (Attitude and Orbit Control Systems) interacts with a high-precision payload pointing system (e.g., understanding of ephemeris, onboard pointing profiles, etc.)., • Experience working on free-space optical communication pointing/tracking systems or telescopes. For instance, developing PAT for laser communications, optical telescopes for imaging satellites, or line-of-sight stabilization for airborne lasers. Knowledge of atmospheric effects (seeing, turbulence) on beam pointing and strategies to counter them (like adaptive optics or feed-forward) is beneficial., • Exposure to adaptive optics systems (deformable mirrors, wavefront sensors) or tip-tilt correction in telescopes can be useful, as it overlaps with high-frequency correction of beam pointing. Experience planning acquisition beacon strategies or working with transponders and retro-reflectors on the ground terminal., • Experience with low-latency hardware implementations of control loops – for example, using FPGAs, DSPs, or real-time operating systems to achieve control loop frequencies in the kHz range. Familiarity with FPGA development toolchains (Xilinx or Microsemi) for implementing high-speed tracking algorithms is a plus., • Space environment experience is preferred – e.g., designing control systems or sensors that flew on spacecraft or aircraft. Knowledge of radiation effects on sensors/electronics, thermal considerations for sensors in vacuum, and qualification testing (vibe, shock) for flight hardware., • Candidates with deep experience in terrestrial optical tracking (e.g., telescope pointing or military targeting systems) will also be considered, especially if they demonstrate understanding of how to adapt such systems for space use. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role Our enterprise software team builds the digital backbone that powers K2 Space's satellite design, manufacturing, and mission operations. We develop tools that connect engineering, production, and mission control into a seamless ecosystem — enabling our hardware to get from concept to orbit faster than ever before. As we continue to grow, we're looking for a Senior Platform Engineer on our Enterprise Information Systems team, you must possess strong technical skills and a sense of empathy for your fellow developers. You will work closely with other talented engineers, architects and senior stakeholders to design, implement, and deliver on our roadmap. Our Ideal Candidate • Distills Kubernetes & cloud networking (identity, routing, segmentation, exposure) into clear, lightweight abstractions that cut cognitive load for product teams, • Claims ownership of hard connectivity challenges end‑to‑end, including design, rollout, adoption, and lifecycle producing solutions with company‑wide impact, • Practices surgical precision in feature development, delivering high value while avoiding complexity that delays or bloats, • Delivers work permeated with excellence including readable code, automated tests, clear documentation, consistent maintenance, and polished observability, • Intuitively understands packet flow, service identity, and secure communication with a keen ability to simplify them, • Understands the importance of resilience and reliability in production operations and upgrades Responsibilities And Accountabilities • Design and evolve self‑service connectivity abstractions enabling scoped segmentation, governed exposure, adaptive ingress/egress, and traceable traffic, • Own service identity & trust (mTLS, cert automation, least‑privilege east‑west, governed egress) with broad coverage and low friction, • Engineer resilient traffic paths (timeouts, retries, circuit breaking, failure isolation) and harden them via chaos tests, automated remediation, and MTTR reduction, • Establish observability standards so end‑to‑end request path and applied policies are visible (source, identity, route, outcome, saturation, cost) across environments, • Provide approachable docs & diagnostics (guides, diagrams, 'why can't this connect?' flows) to shorten support loops, • Optimize performance & cost (latency budgets, cross‑AZ transfer, IP consumption, LB efficiency) and act on anomalies, • Apply threat & abuse modelling to connectivity surfaces (API exposure, egress, identity propagation) using industry principles while keeping solutions developer‑friendly, • Steward lifecycle and adoption including versioning, safe migrations, deprecations, usage telemetry, and proactive pruning of unused resources, • Mentor engineers and partner with adjacent DevX teams to embed networking abstractions into golden paths, raising organizational fluency and consistency, • Own, operate, and maintain network related infrastructure within and adjacent to EKS Qualifications And Experience • BS/MS in Computer Science (or equivalent) and 8+ years of experience building and operating distributed/platform systems with production Kubernetes/EKS ownership, • Proficiency in at least one language (Go, TypeScript, Python, Java) and disciplined SCM workflows (branching, reviews, automated gates), • Solid grounding in cloud + Kubernetes networking, for example VPC & subnet layout, routing, east-west segmentation, service exposure, DNS/CoreDNS, policy enforcement, and CNI behaviour, • Practical service trust & identity knowledge such as mTLS, certificate automation/rotation, PKI/CA or SPIFFE/SPIRE concepts, • Working understanding of traffic resilience & performance: timeouts, retries, backoff, circuit breaking, rate limiting, failure isolation, latency and saturation analysis, • Experience with developer connectivity abstractions: K8s CRDs/operators, guardrails (admission, lint, simulation) and automated tests, • Competence in observability & SLOs (metrics, tracing, structured logs, L4/L7 telemetry, end‑to‑end request path, visibility into applied policies, SLI/SLO definition & enforcement), • Experience with infrastructure as code and delivery: Terraform or CDK, GitOps (Argo/Flux), progressive/canary rollouts, policy-as-code integration, • Operational experience: chaos/fault injection, component upgrades (CNI, proxies, cert issuers), incident response, • Ability to communicate and mentor on networking & identity across varied fluency levels, • Working knowledge of eBPF / Cilium Hubble or Envoy extensions is an asset, • Exposure to Gateway API or service mesh (Istio, Linkerd, ambient), multi region failover, IPv6/dual stack planning is an asset, • Base salary range for this role is $165,000 - $215,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a highly skilled Space Payload Responsible Engineer (RE) to lead the design, development, integration, test, and flight qualification of advanced spaceborne payloads. The ideal candidate will have hands-on experience with phased array systems, RF receivers, power and control architectures, and spacecraft-level interfaces. In this role, you will serve as the technical authority for the payload, guiding multidisciplinary engineering teams from concept through on-orbit activation. You will be responsible for technical execution, schedule and risk management, cross-functional coordination, and delivering a fully qualified payload to spacecraft integration. This position requires strong leadership, deep engineering knowledge, and the ability to operate in a fast-paced mission environment.JOB DUTIES AND RESPONSIBILITIES • Serve as the Payload Responsible Engineer (RE) and primary technical point of contact for the payload throughout the mission lifecycle., • Lead the end-to-end engineering effort for the payload, including architecture, design, prototyping, integration, test, environmental qualification, and flight readiness., • Coordinate and direct a team of RF, digital, mechanical, thermal, software, and systems engineers to ensure consistent and timely technical execution., • Develop and review payload control schemes, internal data interfaces, command & telemetry architecture, and firmware/software integration as needed., • Oversee development and performance of phased array antennas including beamforming, calibration, and environmental considerations.., • Manage all flight qualification activities, including environmental test planning (thermal vacuum, vibration, shock, EMC), margin assessment, and final acceptance testing., • Generate and maintain payload-level documentation: requirements, ICDs, block diagrams, test plans, verification matrices, risk registers, and design reviews., • Interface with spacecraft systems engineering, mission assurance, manufacturing, vendors, and test facilities., • Drive root cause analysis, anomaly resolution, and technical risk mitigation throughout development and test campaigns., • Communicate status, technical trades, risks, and design decisions to internal leadership and external customers.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Physics, or related technical field. (Master’s or Ph.D. preferred.), • 9 years of engineering experience in space payload development or RF/antenna systems., • Direct experience designing and testing phased array antennas for space or high-reliability applications., • Hands-on experience with RF receivers, including front-end architectures, downconverters, filtering, and RF system modeling., • Demonstrated understanding of payload control systems, digital interfaces, command & data handling, and embedded hardware/software interactions., • Experience with space power systems, including DC-DC converters, load analysis, protections, and spacecraft power interfaces., • Proven experience executing or overseeing flight qualification and environmental test campaigns (TVAC, vib/shock, EMC, radiation considerations)., • Leadership experience, including mentoring or leading multidisciplinary engineering teams., • Proficiency with engineering tools such as RF simulation packages (HFSS, CST, ADS, MATLAB), schematic/PCB tools, or systems engineering tools (Doors, Cameo)., • Strong knowledge of space systems engineering practices, requirements flowdown, verification/validation, and configuration management., • Excellent communication skills with ability to present complex technical information to diverse audiences.PREFERRED EXPERIENCE, • Experience managing projects for government and commercial customers. Experience with radiation-tolerant design, proton/total-dose analysis, and EEE parts selection., • Experience with high-rate manufacturing, rapid development cycles, or NewSpace ecosystems., • Prior role as a Responsible Engineer, Technical Lead, IPT Lead, or Chief Engineer on flight hardware., • Experience with ground test setups, RF test equipment, phased array calibration, and antenna range measurement., • Background in digital signal processing, beamforming algorithms, or embedded firmware for payload control., • Experience mentoring less experienced project engineers and design engineers in associated discipline

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. Were designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Senior NDE Engineer - Solid Rocket Motors Castelion is seeking a Senior NDE Engineer to own all non-destructive evaluation activities for our solid rocket motor programs. In this role, you will develop, qualify, and deploy advanced inspection techniques capable of detecting critical flaws in large energetic articles while supporting aggressive production rates. You will serve as the technical authority on radiographic, ultrasonic, and emerging NDE methods in a high-hazard, ITAR-regulated environment. CORE RESPONSIBILITIES NDE Process Ownership: Own the full NDE lifecycle for solid propellant motors: technique development, procedure creation, personnel training, equipment selection, and daily execution. Establish repeatable, high-confidence inspection processes for propellant voids, case-bond anomalies, liner/insulator disbonds, inhibitor cracks, and nozzle defects. Advanced Technique Development: Architect and qualify next-generation NDE solutions including digital radiography (DR), computed tomography (CT), phased-array ultrasonics (PAUT), thermography, and shearography. Implement automated defect recognition (ADR) to support rate production. Inspection Throughput and Automation Design and implement high-throughput inspection cells (robotic manipulators, conveyorized X-ray, real-time CT reconstruction). Reduce inspection cycle time while maintaining or improving probability of detection (POD) for critical flaw sizes. Regulatory and Customer Compliance: Author and maintain NADCAP-compliant NDE procedures, technique sheets, and Level III responsibilities. Serve as an interface with customer and regulatory bodies during source inspections, audits, and qualification reviews. Anomaly Investigation and Material Review Board: Lead NDE support for root-cause investigations of in-process and flight anomalies. Provide rapid, high-fidelity imaging and interpretation to disposition non-conformances and prevent schedule impacts. Technology Insertion and Capital Planning: Identify, evaluate, and deploy emerging NDE technologies (e.g., high-energy CT for thick-section propellant, AI-assisted ultrasonics). Lead capital projects for new inspection bays, radiation vaults, and explosive-compatible equipment. Cross-Functional Collaboration: Partner with Manufacturing Engineering to design inspectable features into new motor designs. Work with Quality and EHS to ensure radiation safety, explosive quantity-distance compliance, and personnel qualification. QUALIFICATIONS Basic Requirements • Bachelors degree in Engineering, Physics, Materials Science, or related field., • Minimum 710 years of hands-on NDE experience, preferably in the Aerospace industry., • Proven track record developing and qualifying NDE techniques for large solid rocket motors (30 in diameter, case-bonded grains)., • Deep expertise in digital radiography systems, high-energy linear accelerators, and industrial CT reconstruction software., • Experience achieving NADCAP accreditation for NDE in propulsion or explosives environments., • Hands-on implementation of automated defect recognition and phased-array UT on complex geometries., • Prior work supporting rapid-response anomaly investigations on strategic or launch vehicle programs., • Strong aptitude for scripting (Python, MATLAB) to automate image processing and reporting., • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role Our enterprise software team builds the digital backbone that powers K2 Space's satellite design, manufacturing, and mission operations. We develop tools that connect engineering, production, and mission control into a seamless ecosystem — enabling our hardware to get from concept to orbit faster than ever before. As we continue to grow, we're looking for a Cloud Engineer who shares our vision: someone who doesn't just maintain cloud infrastructure — but thinks deeply about scalability, security, reliability, and how cloud systems power space-grade engineering and operations. Responsibilities • Design, build, deploy, and maintain cloud infrastructure supporting mission-critical workloads (IaaS, PaaS, SaaS, FaaS) across production, staging, and development environments., • Define and implement infrastructure-as-code (IaC) automation (Terraform, ARM/Bicep, etc.), CI/CD pipelines, configuration management, and other automation tooling to enable rapid, reproducible, and secure deployments., • Collaborate with software, mission-ops, and DevOps teams to integrate cloud architecture into our development lifecycle (DevSecOps — from build to launch)., • Establish and manage identity and access management (IAM), role-based access, encryption, network security, secrets management, and compliance controls., • Monitor and maintain the health, performance, and cost-effectiveness of cloud services; implement logging, monitoring, alerting, and capacity planning., • Perform security assessments, threat modeling, vulnerability scans, compliance audits; develop mitigation strategies and drive best practices., • Create clear documentation of architectures, relevant procedures, security policies, and infrastructure diagrams — and communicate across teams and stakeholders., • Bachelor's degree in Computer Science, Information Technology, or related field — or equivalent practical experience., • 5+ years (senior-level) hands-on experience managing cloud infrastructure (AWS, Azure, GCP or similar), preferably across multiple cloud platforms., • Strong proficiency with IaC tools (Terraform, ARM/Bicep, CloudFormation, etc.), CI/CD, configuration management, and scripting (e.g. Python, Bash, PowerShell)., • Solid understanding of cloud-native services (VMs, containers/Kubernetes, serverless, databases, networking, storage) and ability to design scalable, resilient architectures., • Experience with container orchestration systems (Kubernetes, Docker) and modern deployment workflows., • Deep knowledge of security best practices: IAM, encryption, network security (firewalls, VNets), secrets management, monitoring, logging, and compliance frameworks., • Familiarity with (or willingness to learn) compliance regimes relevant to defense/space sector (e.g., FedRAMP, CMMC, ITAR, government-cloud environments) — especially if working on sensitive or government-facing projects., • Advanced cloud certifications (e.g. AWS Solutions Architect/DevOps, Azure Administrator/DevOps/Security, Kubernetes certifications), • Experience with hybrid clouds / Gov-cloud environments / regulated-space-industry compliance, • Prior experience supporting aerospace, defense, or highly regulated workloads, • Base salary range for this role is $165,000 - $215,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level, • Comprehensive benefits package including paid time off, medical/dental/vision/ coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description We are seeking a skilled Interventional Radiology (IR) Technologist for a travel contract. This role requires technical expertise in assisting with a broad range of angiography examinations and minimally invasive procedures. The ideal candidate is highly proficient with GE Innova imaging systems and possesses the clinical confidence to act as a primary assistant during complex interventions. Key Responsibilities • Procedural Assistance:Scrub in and assist physicians with angiography examinations and interventional procedures, includingLine Placements, Angiograms, Kyphoplasty,andPercutaneous Nephrostomyexams., • Imaging Technology:Operate and troubleshootGE Innovaequipment to ensure high-quality imaging and patient safety., • Patient Care:Prepare and position patients for sterile procedures, maintaining a safe radiation environment (ALARA) for patients and staff., • Shifts:Five 8-hour shifts per week (Monday Friday)., • Standard Hours:07:00 15:30., • Licensure:ActiveRT(ARRT)certification is required., • Experience:Proven experience in a high-volume Interventional Radiology or Angiography suite., • Equipment Proficiency:Direct experience withGE Innovaimaging platforms is highly preferred., • Verify your 2026 credentials via the American Registry of Radiologic Technologists (ARRT)., • Access 2026 IR clinical standards at the Society of Interventional Radiology (SIR)., • Review GE Innova technical documentation via the GE Healthcare Support Portal.

Job Description JOB ID: PHS-5857 Position: Angio/Interventional Rad Tech Shift Schedule: 07:00 - 15:30 Location: Inglewood, CA Start date: 02/02/2026 - 05/03/2026 Pay: $90-$93 per hour Job Type: Long Term Assignment Job Summary: Intervention Radiology Technologist that can assist performing Angiography Examinations. Please apply candidates with experience in assisting performing Line Placements, Angiograms, Kyphoplasty, Percutaneous Nephrostomy Exam, ETC. & familiar with GE Innova equipment. Interventional Radiology Tech/Angiography Tech. RT(ARRT) required. 7am-3:30 plus call/ Ideally 5 days per week, 8 hr shifts however as needed/ M-F IR Technologist Traveler. Required to take call daily for the first month. May include responsibilities such as precepting. The Angio/Interventional Radiologic Technologist assists in performing minimally invasive, image-guided vascular and non-vascular procedures under the supervision of an interventional radiologist or other qualified physician. This role involves operating fluoroscopic and angiographic imaging equipment, preparing patients, ensuring radiation safety, and maintaining sterile technique throughout procedures. Qualifications: Education & Certification: • Associates or Bachelors degree in Radiologic Technology or a related field., • Current ARRT (American Registry of Radiologic Technologists) certification in Radiography (R) required., • ARRT certification in Vascular-Interventional Radiography (VI) preferred or must be obtained within [specific timeframe]., • State licensure (if required)., • BLS (Basic Life Support) certification required; ACLS preferred.Experience:, • 1+ years of experience in diagnostic radiology; prior interventional radiology or angiography experience preferred.

Job Description Lead Avionics Engineer – Drive Next-Generation Spacecraft Systems! El Segundo, CA | On-site Opportunity Summary A seed-stage deep-tech startup is developing next-generation platforms that enable mobility, maneuverability, and in-space resource capability for a wide range of orbital missions. The company is focused on advancing spacecraft performance through novel propulsion and onboard systems, supporting missions that require reliability in demanding orbital environments. The engineering team brings experience across spacecraft development, launch systems, and high-reliability hardware programs, and the company is entering a rapid build and test phase. As a Lead Avionics Engineer, you will own the avionics and electronic system architecture across the spacecraft platform. You will guide design decisions from concept through hardware bring-up and flight readiness, working across flight computers, power systems, communications, and supporting electronics. This role is built for someone who wants to take true ownership, move quickly, and help shape the technical direction of a company that is building hardware to operate in some of the most complex mission environments in space. About Us We are a venture-backed space technology startup building high-performance spacecraft platforms that support in-space mobility and future propellant generation capabilities. Our mission is to expand what is possible in orbit by pairing advanced propulsion with tightly integrated spacecraft systems. Operating from Southern California, we combine a first-principles engineering culture with a fast-moving startup mindset, giving engineers real ownership over design, testing, and mission execution. Job Duties • Lead avionics architecture, design, qualification, and integration across the spacecraft platform, • Develop flight-ready electronics from concept through system integration and mission operations, • Translate operational needs into technical requirements and system-level trade studies, • Design and prototype flight computers, power distribution, networking, and comms hardware, • Perform structured debugging, fault isolation, and root-cause investigations, • Build hardware-in-the-loop test environments and validation frameworks, • Ensure reliability, testability, and compliance across mission-critical systems Qualifications • Bachelor’s degree in electrical engineering, aerospace engineering, computer engineering, computer science, or related field, • 5+ years of experience designing avionics or space-grade electronics, • Direct experience delivering flight-qualified or mission-critical electronic systems, • Familiarity with government, aerospace, or industry hardware standards, • Hands-on background in circuit design, debugging, and test equipment use, • Proficiency with PCB design tools such as Altium or similar platforms, • Strong system-level troubleshooting capability across hardware and software interfaces, • Experience working in fast-paced engineering environments with significant ownership, • Strong technical foundation supported by first-principles problem solving Preferred Experience • Avionics or electronics work on spacecraft, launch vehicles, satellites, or deep-tech platforms, • Experience supporting integration, environmental testing, or qualification campaigns, • Background working with space-relevant system constraints such as radiation tolerance, thermal limits, EMI/EMC, or mission reliability engineering, • Experience with PCB layout and schematic design tools beyond basic use, • Familiarity with aerospace standards including MIL-spec, ECSS, or NASA-derived guidelines, • Prior exposure to early-stage startup environments or small engineering teams Why Join Us • High-ownership role with direct impact on flight hardware, • Opportunity to help shape the architecture of next-generation spacecraft systems, • Tight-knit, high-caliber team working on complex and meaningful technology, • Build in an environment where decision-making is fast and engineering leads the way Compensation Details $175,000 - $215,000 #LI-AV

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Senior Power Electronics Engineer I to join our growing spacecraft payload development team. In this position, you will contribute across the entire development life cycle of next-generation power electronics hardware for satellites and space power systems payloads—from working to define power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. JOB DUTIES AND RESPONSIBILITIES • Define electrical power system architecture, and derive power subsystem requirements, • Design DC-DC power converters, power management and control circuits from concept to production release, • Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules, • Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis, • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs, • Perform board bring-up and design verification testing of analog and power electronics circuits, • Perform system integration, qualification testing, and production release of power supply modules and power systems, • Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university, • Minimum of 4 years of experience designing analog and power electronics, • Experience with power stage design ofcommon DC-DC power converter topologies (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback), • Experience with voltage mode control and peak current mode control modeling and characterization for DC-DC converters, • Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory, • Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC), • Hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Master of Science or PhD in Electrical Engineering with research focus in power electronics, • Experience designing high-reliability analog and power electronics for automotive, space or defense applications, • Knowledge of space radiation environments and radiation effects in electronics, • Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices, • Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans, • Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Experience with power magnetics modeling, design and laboratory characterization, • Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.), • Knowledge of power stage design for inverters and motor drives, • Experience with advanced control schemes for DC-DC power converters (e.g. constant on-time control, boundary mode control, average current mode control)

Job DescriptionSalary: $200,000+ DOE Who Were Looking For Quantum Space is redefining mobility and autonomy beyond Earth orbit. Our Ranger spacecraft deliver high delta-V and sustained on-orbit maneuverability, enabling missions across cislunar and geostationary space that were previously out of reach. We are building the vehicles, infrastructure, and operational expertise that connect and protect assets across the EarthMoon system. We are seeking a Director of Avionics to own the technical vision, development, and delivery of flight avionics across current spacecraft and future vehicle platforms. This is a senior technical leadership role for an engineer who can define architecture, scale teams, and remain deeply engaged with the hardware and software that fly. You will lead avionics from early mission formulation through launch and on-orbit operations while building systems and organizations that scale with Quantum Spaces growth. Where Youll Make an Impact • Serve as the technical and organizational leader for all spacecraft and vehicle avionics systems., • Define and execute the avionics architecture, roadmap, and long-term technical strategy., • Build, mentor, and scale a multidisciplinary avionics organization spanning hardware, embedded software, FPGA, power systems, and integration and test., • Architect and oversee development of:, • Flight computers and command & data handling systems, • Embedded and real-time software, • FPGA, SoC, and high-reliability processing architectures, • Electrical power systems, including batteries, regulation, and distribution, • Propulsion control electronics and safety-critical controllers, • Drive system-level design decisions related to redundancy, fault tolerance, radiation strategy, autonomy, and electrical/data interfaces., • Establish development, verification, and qualification processes that balance speed, rigor, and flight reliability., • Lead avionics integration across spacecraft, payloads, propulsion systems, and ground systems., • Own avionics flight readiness, including technical reviews, risk posture, anomaly resolution, and mission assurance., • Partner with manufacturing and supply chain to define part strategies, vendor relationships, make-or-buy decisions, and production scaling plans., • Support launch campaigns, mission operations, and on-orbit anomaly response as the accountable avionics authority., • Represent avionics leadership in program reviews, executive forums, and external technical engagements. What It Takes Nice to Have • Background in propulsion avionics, safety-critical control electronics, or vehicle control systems., • Exposure to radiation-tolerant design practices and spaceflight qualification standards., • Involvement in production ramp-up, fleet manufacturing, or constellation-scale programs., • Familiarity with on-orbit autonomy, fault management architectures, or advanced health monitoring systems. What Youll Get • Ownership Direct responsibility for avionics systems that define vehicle capability and mission success., • Impact Influence spacecraft, vehicle, and mission-level technical decisions at the highest level., • Leadership Build and lead a world-class avionics organization from architecture through flight., • Growth Expand your scope at the intersection of deep technical leadership and executive-level impact., • Compensation Competitive salary, equity, and comprehensive benefits including medical, dental, vision, generous leave, HSA, 401(k) matching, and equity participation. Additional Requirements To comply with U.S. Government space technology export regulations, including ITAR, applicants must be a U.S. citizen, lawful permanent resident, protected individual per 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Apply now. Join us in building the next generation of spacecraft.

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. As a Senior Thermal Engineer, you will be responsible for the thermal design, analysis, testing, and validation of Astrolab's hardware and systems. You will work collaboratively across engineering disciplines to optimize thermal management solutions, ensuring the longevity and functionality of our rovers during extended missions in harsh conditions. What you'll do: • Develop thermal control strategies and systems for planetary rovers, including thermal analysis, design, and testing for operation in extreme environments, • Conduct thermal modeling and simulation, including transient and steady-state thermal analysis for systems exposed to vacuum, radiation, and temperature extremes, • Perform thermal control system (TCS) design and analysis, ensuring rover components withstand operational loads and environmental hazards, • Design and validate thermal systems using software tools (e.g., Thermal Desktop, ANSYS, Sinda/Fluent) and physical tests, • Collaborate with multidisciplinary teams to integrate thermal solutions into overall rover design, • Automate workflows to streamline thermal analysis processes and reduce engineering cycles, • Document designs, analysis results, and validation outcomes to support team understanding and future reference, • Review and provide feedback on the thermal designs and analyses of peers, • Drive performance improvements and cost-efficient solutions in thermal system design What you'll bring: • Bachelor’s degree in an engineering or STEM field, • 4+ years of experience with thermal analysis and design using software tools such as MATLAB, Python, or Thermal Desktop, • Experience with thermal modeling software like ANSYS, SINDA/FLUENT, or Thermal Desktop (Thermal Desktop experience highly desired), • Knowledge of high performance heat transfer systems (heat pipes, thermal switches, etc.) and in-space thermal protection (MLI, MMOD, etc.), • Experience with planetary rover systems or space-grade thermal components, • Familiarity with thermal FEA software (NX, Ansys, etc.), • Ability to analyze and make decisions based on thermal test data and simulation results, • Strong written and verbal communication skills, • Experience with reduced-order thermal modeling techniques Benefits and Perks • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set-up reimbursement, • Fully flexible and remote-friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Twice a month, social hour on-site with food and drinks

Job DescriptionDescriptionAs a Senior Optical Systems Engineer, you will own the design and development of the optical head / beam director for our spacecraft laser communication terminal. Your core responsibility will be to create the telescope and pointing optics that put photons on target and collect them with diffraction-limited fidelity, even under the thermal and mechanical stresses of geostationary orbit. You will work closely with pointing control, photonics, thermal, and structures teams to ensure the optical subsystem meets its performance goals. This role offers significant autonomy – you will serve as the subject matter expert for space optical systems, driving the optical architecture from concept through prototyping, test, and flight. This is a full-time, on-site position with substantial opportunity to grow into a technical lead as the FSO team expands. Responsibilities • Design and analyze the FSO optical head (transmit/receive telescope and fine-steering mirror system) to achieve high Strehl ratio and throughput under space environment conditions. Use industry-standard optical design software (e.g. Zemax OpticStudio, Code V) to develop and optimize optical layouts, including the beam expansion optics and fast steering elements., • Integrate opto-mechanics for space: Work closely with mechanical engineers to co-develop opto-mechanical mounts and structures, incorporating athermalization, thermal control, and vibration damping. Perform tolerance analyses for manufacturing, alignment, and thermoelastic effects to ensure the optics remain aligned and focused through launch and on-orbit thermal., • Stray light and contamination control: Implement baffles, coatings, and stray-light analysis to minimize background noise. Establish contamination control requirements (cleanliness, purge, etc.) and design the optical system and enclosure to maintain performance in a harsh space environment (preventing fogging, pollution, etc.)., • Optical alignment and test: Develop optical alignment procedures and specify metrology tools (alignment telescopes, interferometers, wavefront sensors) needed for assembly and integration. Perform hands-on alignment and characterization of optical sub-assemblies on the bench, verifying that assembled optics meet pointing accuracy and wavefront error requirements., • System bring-up and prototyping: Create rapid prototype optical setups (e.g. benchtop experiments with commercial optics) to validate concepts early. Later, support rigorous environmental testing (vibration, thermal-vacuum) of the flight optical hardware, analyzing test data to confirm performance and adjust the design as needed., • Bachelor’s degree in Optical Engineering, Physics, Aerospace Engineering, or a related field., • 5+ years of experience designing, analyzing, and testing complex optical systems (e.g. telescopes, lenses, or optical instruments)., • Proficiency with optical design/analysis software such as Zemax OpticStudio or Code V for lens/telescope., • Strong understanding of Gaussian optics, diffraction, and wavefront error budgeting., • Demonstrated experience building, aligning, and validating optical hardware in a lab or production environment., • Familiarity with opto-mechanical design principles and ability to lead mechanical engineers on mounting, thermal management, and packaging of optical components., • Proven ability to design ruggedized optical systems for harsh environments (vibration, thermal extremes), • Excellent problem-solving skills in optics (ray tracing, aberration analysis, tolerancing). Ability to clearly document designs, write test plans, and communicate results. Preferred Skills and Experience • M.S. or Ph.D. in Optics, Physics, or related discipline, with a focus on optical system design or photonics., • Experience designing space-based optical systems or flight hardware (e.g. satellite telescopes, optical payloads), including knowledge of thermal-vacuum, radiation, and launch environment constraints. Familiarity with structural-thermal-optical performance (STOP) analysis tools like SigFit for predicting optical performance under., • Experience with fine steering mirrors or fast tip-tilt platforms for beam stabilization. Understanding of line-of-sight jitter control and ultra-fine pointing requirements (sub-micro-radian regimes)., • Proficiency with stray-light modeling or analysis (FRED or similar), and designing baffle systems or coatings to suppress stray illumination., • Strong hands-on skills with optical metrology and test equipment – e.g. interferometers (for wavefront measurement), beam profilers, alignment telescopes, optical spectrum analyzers. Experience setting up optical test beds, long-path collimators, or vibration test fixtures for optical assemblies is a plus., • Familiarity with laser communications or fiber-optic communication fundamentals – for example, understanding how fiber coupling, polarization, and beam quality impact link performance. Experience bridging free-space optical systems with fiber optics is beneficial., • Self-driven and capable of leading the optical subsystem development with minimal guidance. Prior experience leading a small team or project in optical or photonic hardware development is a plus. You should be comfortable taking ownership of the optical architecture and mentoring others as needed., • Space/aerospace experience is highly preferred (designing optics for satellites, spacecraft, or aircraft). However, candidates with strong experience in terrestrial free-space optical links or fiber-optic telecom hardware in demanding environments are also encouraged to apply – the ability to harden such systems for space is highly valued. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description We are seeking a skilled Interventional Radiology (IR) Technologist for a travel contract. This role requires technical expertise in assisting with a broad range of angiography examinations and minimally invasive procedures. The ideal candidate is highly proficient with GE Innova imaging systems and possesses the clinical confidence to act as a primary assistant during complex interventions. Key Responsibilities • Procedural Assistance:Scrub in and assist physicians with angiography examinations and interventional procedures, includingLine Placements, Angiograms, Kyphoplasty,andPercutaneous Nephrostomyexams., • Imaging Technology:Operate and troubleshootGE Innovaequipment to ensure high-quality imaging and patient safety., • Patient Care:Prepare and position patients for sterile procedures, maintaining a safe radiation environment (ALARA) for patients and staff., • Shifts:Five 8-hour shifts per week (Monday Friday)., • Standard Hours:07:00 15:30., • Licensure:ActiveRT(ARRT)certification is required., • Experience:Proven experience in a high-volume Interventional Radiology or Angiography suite., • Equipment Proficiency:Direct experience withGE Innovaimaging platforms is highly preferred., • Verify your 2026 credentials via the American Registry of Radiologic Technologists (ARRT)., • Access 2026 IR clinical standards at the Society of Interventional Radiology (SIR)., • Review GE Innova technical documentation via the GE Healthcare Support Portal.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Component Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be a key member of our product development team, leading the parts and component selection, qualification, failure root-cause analysis, standardization, vendor evaluations, and performance verification efforts. The ideal candidate is experienced in EEE components engineering for commercial space applications. Qualified candidates will have ample growth opportunities, with the potential to build our company and processes through technical leadership roles or broader functional management roles. JOB DUTIES AND RESPONSIBILITIES • Act as CesiumAstro’s technical representative with customers to define testing and qualification requirements for all EEE parts., • Work all aspects of high-reliability EEE parts selection, standardization, qualification, and performance verification on a growing team., • Develop a roadmap for state-of-the-art components, working with the engineering design team for an effective product upgrade strategy while balancing cost and schedule, • Provide EEE part expertise and support on aerospace programs, reviewing customer documents and aligning their needs with the company’s product lines., • Evaluate components for compliance to industry requirements such EEE-INST-002, AEC, TOR, JEDEC, and others., • Author parts plans and process definition documents for internal and external use., • Write and review Engineering Change Orders (ECOs) to component-level procurement and test control documents., • Develop process improvements for streamlined component-level ECOs review and adjudication., • Experience building relationships with space part suppliers., • Review screening and test data received from manufacturers and test laboratories for compliance to specifications, purchase order requirements, and program contracts., • Interface internally with design engineers, reliability engineers, and quality engineers in support of risk mitigation and product development review efforts., • Prepare Non-Standard Parts Approval Requests (NSPARs) and Source Control Drawings (SCDs)., • Perform bill-of-materials cost analysis, components research and obsolescence mitigation, and supplier audits.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree or higher in Electrical Engineering or a related discipline., • Minimum 8 years of relevant prior experience as a component engineer., • Knowledge of component selection, qualification, screening and derating for military and aerospace., • Familiar with management of new part requests, part objects, and part attributes in a Product Lifecycle Management System, • Direct experience with parts plans for high-volume satellite constellations, evaluating parts screening and qualification in the context of high-volume constellation performance., • Excellent communication and interpersonal skills., • Strong desire to change an industry and disrupt incumbent players., • Sense of urgency, with the ability to work independently under agile development timelines., • Willingness to learn and work in both a support capacity and as a lead on differing functions.PREFERRED EXPERIENCE, • Demonstrated technical leadership in component engineering by mentoring junior component engineers and educating designers within your area of expertise., • Participate in failure analysis investigations ofdefective components and author failure analysis reports as required., • Knowledge and working familiarity with key reliability analyses for space mission hardware (prediction, derating, FMECA, WCA)., • Experience with radiation effects on electronics (TID, SEE) and common mitigation techniques., • Knowledge and working familiarity with key materials and process requirements for tin whisker mitigation, • Experience with components in ground or air applications, • Knowledge of EEE component manufacturing processes.

Job DescriptionDescriptionAs an RF Test Engineer, your core responsibility will be to own the design, bring up, and implementation of test fixtures and software for Impulse Space’s wireless products. You will work with RF engineers, RF software engineers, mechanical engineers, and others to meet test needs across a wide range of capabilities. You may work on uplink and downlink radios up to 32GHz, GNSS receivers, desense testing, and coexistence testing. Responsibilities • Work with a cross-disciplinary team to define and implement RF test requirements, implement RF test software architecture, and design and build RF test hardware fixtures., • Implement scripts to control RF test equipment including spectrum analyzers, network analyzers, antenna test infrastructure, power meters, power supplies, and other devices., • Design and implement fixtures to test design compatibility with GNSS constellations and ground station infrastructure, • Work with hardware and software engineers to prepare testing for radiation and ground station test programs, • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related technical field, • Experience writing scripts for wireless systems or hardware testing infrastructure, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, and software defined radios, • Proficient in testing and troubleshooting RF devices, • 2+ years experience writing Python, LabView, TILE, or other test software, • Strong understanding of RF system parameters such as channel power, EVM, modulation, and bandwidth, • Experience writing and documenting RF test procedures for use by other engineers and technicians, • Experience testing and troubleshooting microcontrollers and/or FPGA's, • Familiarity working with embedded Linux, • Experience with common RF protocols like SRS4, DVBS-II, and CCSDS, • Experience with GNU radio flowgraph development and troubleshooting, • Familiarity with satellite spectrum licensing laws, agencies, and standards, • Experience testing RF devices for regulatory compliance, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Photonics/Optical Communications Engineer, you will be responsible for the end-to-end optical signal chain of our laser communication system. You will design and integrate the laser transmitter and optical receiver that drive our high-data-rate link. This includes the seed lasers, modulators, fiber optics, optical amplifiers on the transmit side, as well as the fiber-coupled collection optics, detectors, and front-end electronics on the receive side. You’ll own the optical link budget and ensure that we meet the required optical signal-to-noise ratio and sensitivity. This role is very cross-disciplinary: you will work with the Optical Systems lead & Modem/DSP. As the Photonics lead, you will have the freedom to select technologies and shape the architecture and will guide the team in making the optical link a reality. This position is on-site and ideal for an engineer with deep experience in fiber optic sensors and amplifiers who can drive a design from lab prototype to a space-qualified product. Responsibilities • Design and develop the high-performance optical transmitter for the FSO link. Design the amplifier chain and manage fiber link budget., • Define the interface between the optical transceiver and the optical head (telescope). Work on the fiber-to-free-space relay optics, ensure polarization alignment and beam mode quality are maintained. Work closely with the team to manage the handover from fiber to telescope and to accommodate any pointing misalignments or focus adjustments., • Own the optical link budget analysis, calculate and flow down requirements for launch power, receiver sensitivity, losses, and noise figure. Model the end-to-end Optical Signal-to-Noise Ratio (OSNR) and Bit Error Rate (BER) performance as a function of atmospheric loss, pointing jitter, etc., • Identify and work with vendors for critical optical components. Ensure components meet space qualifications or develop a plan to ruggedize and test COTS components for space use (radiation testing, thermal vacuum testing of lasers, etc.)., • Provide technical input to the rest of the team from an optical communications perspective. Work with the Modem/DSP engineer to define the electrical-optical interface and pointing/control lead to coordinate fiber coupling. Ensure that the optical transceiver design aligns with overall system requirements and assist in system-level testing (e.g. end-to-end test of sending data over the laser link in a simulated environment). Minimum Qualifications • Bachelor’s or Master’s degree in Electrical Engineering, Photonics, Optical Engineering, Physics, or related field., • 5+ years of hands-on experience developing optical communication hardware or fiber-optic/photonics systems., • Strong knowledge of lasers and fiber optics. Experience with designing laser transmitter systems – e.g., working with semiconductor lasers or fiber lasers, modulators (EOMs/MZMs or acousto-optic modulators), and optical amplifiers (EDFAs or Raman amplifiers)., • Familiarity with managing optical power and nonlinearity (stimulated Brillouin/Raman scattering, etc.) in high-power fiber systems., • Experience with optical receivers and detectors for high-speed communications. Knowledge of photodetector types (PIN, APD, or coherent receivers) and experience designing or testing high-speed photodiode + amplifier front-ends. Understanding of concepts like shot noise, thermal noise, and how to achieve sensitivity down to the quantum limit (e.g., using coherent detection or APDs)., • Ability to model and analyze optical system performance. This could include link budget analysis in MATLAB/Python or using specialized photonic simulation tools. Comfort with concepts like OSNR, Eb/N0, BER, and using those to drive design decisions. Experience interpreting optical spectra, eye diagrams, and constellation diagrams to evaluate system performance., • Extensive hands-on lab experience with photonic equipment. Proficiency in using optical test instruments (optical spectrum analyzers, power meters, high-speed oscilloscopes, bit-error-rate testers, etc.)., • Skilled in fiber handling (splicing, connector termination, fiber alignment) and free-space optical alignment on an optical table. Demonstrated ability to set up complex optical experiments and troubleshoot issues (misalignments, reflections, noise sources)., • Aerospace/space experience is highly valued – e.g., designing optical or communication hardware for satellites, high-altitude aircraft, or space instruments. Knowledge of radiation effects on photonic components (radiation-hardened fiber, radiation-induced attenuation, etc.) and mitigation strategies. Experience with space qualification of optics (vibration testing of fiber assemblies, thermal vacuum operation of lasers) is a major plus., • Experience with coherent optical communication systems (homodyne or heterodyne). This includes an understanding of I/Q modulators, optical hybrids, and complex modulation formats (BPSK, QPSK, QAM), as well as familiarity with frequency/phase locking techniques for lasers. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The Chief Systems Engineer at Space Kinetic will be a highly experienced and visionary engineering professional with extensive experience in successfully leading complex space programs from concept to mission operations and have demonstrated technical excellence in space system mission design and supporting development of space hardware from System Concept, System Requirements to Technology Readiness Level 9. This is a critical leadership role responsible for providing critical mission planning, requirements definition, technical oversight and supporting all engineering and programmatic functions within the company in a fast-paced start-up agile environment. The Chief Systems Engineer will develop and execute the overall payload mission, engineering, and production requirements in line with the company's goals and objectives. Core Responsibilities: 1. Overall Technical Authority • Leads the space system's architecture and major design decisions, • Balances performance, SWaP-C (Size, Weight, Power and Cost), and risk, • Signs off on design maturity and readiness at every review 2. Systems Engineering Leadership • Ensures all subsystems (GNC, power, comms, propulsion, structures, thermal, avionics, software, payload, etc.) integrate correctly, • Owns system requirements: flow-down, allocation, verification, validation 3. Mission Performance & Safety • Ensures the Space Kinetic system meets mission performance (pointing, power budget, data throughput, lifetime, survivability), • B.S. in Aerospace Engineering, Mechanical or Electrical Engineering, Computer Science, or related field, • 10+ years of experience in leadership positions of satellite systems development, integration, and operation., • Master's degree or PhD in Aerospace Engineering, Mechanical or Electrical Engineering, Computer Science, Systems Engineering, or a related field., • Ability to work in a fast paced, autonomously driven, and demanding startup atmosphere, • Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$150,000—$230,000 USD

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Engineer I to our Digital and Mixed-Signal Electronics team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior level, you will be tasked with full-stack hardware development for complex modules. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of electronics modules, from concept and architecture through schematic, layout, test, and production, • Own the digital and mixed-signal portions of complex RF electronics, such as phased array control circuitry, • Design circuits with FPGAs, processors, microcontrollers, and other complex programmable targets, • Design mixed-signal electronics ranging from software-defined radios to telemetry subsystems, • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives, • Perform detailed PCB layout in Altium Designer for complex boards, sometimes working with a PCB Designer, • Complete analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, • Develop bring-up plans and design verification plans for new electronics modules, • Perform bring-up and key verification testing of modules, often working with a technician to complete validation, • Release modules to production, working with the Manufacturing and Test Engineering teams, • Mentor junior engineers to build technical understanding and professional development, • Use working knowledge of adjacent fields, such as software and mechanical, to streamline development of electronics modulesJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 4 years of industry or university research experience in board-level electronics design, analysis, and test., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Experience owning the design phase of circuits or boards, including trade studies, key part selection, and detailed design., • Experience delivering subcircuit or board designs to production and deployment., • Experience performing complex PCB layout, such as high-density interconnect (HDI) and high-speed digital or power electronics., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Working knowledge of adjacent fields, such as software and mechanical., • Proficiency in electronics design tools such as Altium., • Strong lab experience for bring-up and verification of new hardware., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE

Job DescriptionDescriptionAs a Senior RF Test Engineer, your core responsibility will be to own RF test strategy for all wireless products at Impulse, define the roadmap for future test needs, and drive cross-team alignment. You will work with RF engineers, RF software engineers, mechanical engineers, and others to meet test needs across a wide range of capabilities. You will work on uplink and downlink radios up to 32GHz, GNSS receivers, desense testing, antennas, and coexistence testing. Responsibilities • Work with a cross-disciplinary team to define and implement RF test requirements, implement RF test software architecture, and design and build RF test hardware fixtures., • Design RF acceptance criteria for flight readiness, • Implement scripts to control RF test equipment including spectrum analyzers, network analyzers, antenna test infrastructure, power meters, power supplies, and other devices., • Design and implement fixtures to test design compatibility with GNSS constellations and ground station infrastructure, • Work with hardware and software engineers to prepare testing for radiation and ground station test programs, • Generate key performance indicator matrices to plan testing for RF products, • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related technical field, • Experience writing automation scripts for RF hardware test, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, network analyzers, GNSS simulators, and software defined radios, • Proficient in testing and troubleshooting RF devices, • 5+ years writing Python, LabView, TILE, or other test software, • Strong understanding of RF system parameters such as channel power, EVM, modulation, Es/N0, C/N0, and bandwidth, • Experience writing and documenting RF test procedures for use by other engineers and technicians, • Familiarity working with embedded Linux, • Strong software debugging skills, • Experience testing and troubleshooting microcontrollers and/or FPGA's, • Experience with common RF protocols like SRS4, DVBS-II, and CCSDS, • Analysis or test experience for electronics performance in radiation environments, • Experience with GNU radio flowgraph development and troubleshooting, • Experience implementing RF transmitter and receiver algorithms, • Familiarity with satellite spectrum licensing laws, agencies, and standards, • Experience testing RF devices for regulatory compliance, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Aya Healthcare has an immediate opening for the following position: Radiation Therapist in Pasadena, CA. We’ll work with you to build the healthcare career of your dreams. Whether you want a job close to home or across the country, we’ve got you. Job Details • Profession: Radiology / Cardiology, • Pay: $700.00/shift, • Assignment Length: 13 weeks, • Shift: Days, • Schedule: 1, 8.5-Hour 08:00 - 17:30, • Openings: 4, • Start Date: 02/09/2026, • Facility Type: Acute Care Hospital, • High pay., • A robust team to support you every step of the way., • A credentialing specialist to streamline the entire compliance process., • Freedom and flexibility around your current schedule., • The easy-to-use Shifts app. Select shifts anytime, anywhere., • When applicable:, • Premium medical, dental, vision and life insurance., • A generous 401k match.

Job Description Join Our Team at Skin and Cancer Institute! Are you passionate about dermatology and skin health? Do you thrive in a dynamic, patient-focused environment? Skin and Cancer Institute is looking for dedicated professionals to join our team! Why Join Us? At Skin and Cancer Institute, we are committed to excellence in dermatology, skin cancer treatment, and cosmetic procedures. We offer a supportive and collaborative work culture where your skills and dedication make a real impact. Summary of Position Work Location: 2409 ARTESIA BLVD. | REDONDO BEACH, CA 9027 The Back Office Medical Assistant plays a vital role in supporting clinical operations by assisting providers with patient care, performing clinical procedures, and maintaining accurate medical records. This position ensures smooth patient flow, adheres to compliance standards, and contributes to a positive patient experience. WHAT YOU'LL DO: Clinical Responsibilities • Provides high-quality customer service and adheres to quality control standards, • Coordinates patient care per physician instructions and company policies, • Escorts patients to exam rooms per company protocol, • Prepares patients for exams by taking histories and explaining procedures, • Conducts and documents patient intake, • Assists in dermatologic procedures (biopsies, excisions, phototherapy, cosmetic treatments), • using sterile techniques, • Supports routine lab tests (e.g., skin scrapings, swabs), • Apply topical treatments or dressings under provider supervision, • Captures clinical photos for documentation and comparison, • Accurately documents patient care in medical records promptly, • Send prescriptions during visits and verify accuracy with provider, • Sterilizes instruments and keeps exam rooms clean by safety standards, • Uploads and maintains pathology, AK, MOHS, and FBX logs, • Verifies pathology log details (patient info, diagnosis, site, lab routing), • Keeps cancer logs current and accurate, • Stocks rooms, monitors supplies, and alerts managers when low, • Maintains strict patient confidentiality, • Asking every patient for a google review., • Educate patients on skin care routines, including post-procedure care and sunscreen use., • Explain treatment plans and follow-up instructions to help patients understand their care journey., • Greetings and checks in patients, verifying personal and medical details, • Collecting all pertinent information at check in (MIPS Questionnaire), • Updating the PA log, ensure codes are entered correctly., • Checks prescriptions throughout the day — verify, highlight, and confirm accuracy, • Schedules appointments and manages follow-up and procedure calendars, • Handles calls, messages, Klaras, Tandem, and responds to inquiries including medication refills and general questions, • Makes timely outbound calls as needed, • Processes prior authorizations and communicates with insurance providers, • Orders and organizes medical supplies to maintain inventory levels Required Skills / Abilities • Demonstrates strong clinical skills with sharp attention to detail, • Communicates effectively and builds rapport with patients and team members, • Proficient in EHR systems and Microsoft Office Suite, • Handles sensitive patient concerns with professionalism and discretion, • Prepares and administers injections (Kenalog, Lidocaine, Epinephrine), • Assists in minor surgical procedures and wound care using sterile techniques, • Adheres to infection control and safety protocols, • Understands and comply with HIPAA regulations and patient confidentiality, • Practices universal precautions consistently, • Collects and processes lab specimens accurately, • In-depth knowledge of medical terminology and dermatologic procedures (Mohs, biopsies, excisions, radiation); skilled in-patient instruction, • High school diploma or equivalent required., • Completion of an accredited Medical Assistant program is a plus., • Certification (CMA, RMA, or equivalent) preferred. The incumbent in this position may operate any/all of the following equipment: • Microsoft 365 apps, fax, email, phone, Klara, EMA, ModMed, iPAD, NoahFace (biometric timeclock), Tandem, CoverMyMeds, LabCorp (software for looking up labs results and ordering supplies), Quest diagnostics What We Offer: • Competitive salary and benefits, • Health, dental, vision, and ancillary insurance options, • 401K retirement savings, • Paid time off, • Professional development opportunities, • Supportive and fair work environment � Apply Today! Be a part of a dynamic team that’s transforming skin health. Submit your resume and cover letter to . We can't wait to meet you! #HealthcareJobs #DermatologyCareers #JoinOurTeam #NowHiring

Job DescriptionDescriptionAs an Embedded Software Engineer your core responsibility will be to write code that runs on custom avionics hardware for executing flight and ground test functions. You will work with avionics hardware engineers, GNC engineers, propulsion engineers, and others to develop performant and maintainable solutions. You will have the opportunity to contribute to many aspects of spacecraft development, including architecting new systems, doing quick prototypes, doing rigorous flight projects, and controlling flight hardware during ground tests. Responsibilities • Implement and improve low-level processor functions such as controls of peripherals, and setup of communication interfaces., • Implement and improve functions such as closed loop control of physical processes, and detection/response algorithms for failures such as broken sensors or radiation upsets., • Provide technical input on new system developments from an embedded software perspective., • Write scrappy code to support development testing of avionics and propulsion devices., • Bachelor's degree in computer science, engineering, math, or scientific discipline; OR 2+ years of professional experience building software in lieu of a degree, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Knowledge of and experience with communication protocols including I2C, CAN, SPI, UART, etc., • Knowledge of microprocessors and microcontrollers, with an understanding of components such as caches, buses, memory controllers, and DMA., • Experience developing low-level drivers for camera modules (e.g., MIPI CSI-2, USB, SPI, I2C)., • Understanding of sensor communication protocols and interfacing with custom or commercial image sensors. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

JOB ID: SS1610CT Position: CT Technologist Location: Inglewood, CA 90301 Shift : All shifts .Monday thru Friday Start date: ASAP Pay Rate: $68-$72 per hour Job Summary: We are seeking an experienced and detail-oriented CT Technologist to join our imaging team in Inglewood, CA 90301. The ideal candidate will perform high-quality CT scans while ensuring patient safety, comfort, and adherence to all departmental protocols. Responsibilities: • Perform CT procedures as ordered by physicians following established protocols., • Ensure accurate patient positioning and image quality., • Maintain and operate CT equipment safely and efficiently., • Verify patient identification and review medical history prior to imaging., • Administer contrast media as required, following safety standards., • Collaborate with radiologists and other healthcare professionals to ensure optimal patient care., • Maintain accurate documentation and patient records in the PACS/RIS system., • Adhere to all infection control, radiation safety, and compliance guidelines. Qualifications: • ARRT (R)(CT) certification required., • Valid California CRT and fluoroscopy license (if applicable)., • BLS certification (AHA) required., • Minimum 1–2 years of recent CT experience preferred., • Excellent communication, technical, and patient care skills. Precision Scans is an equal-opportunity employer, committed to cultural diversity. Precision Scans will provide equal consideration for employment to all qualified applicants without regard to their race, religion, ancestry, national origin, sex, sexual orientation, age, disability, marital status, domestic partner status, or medical condition.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal FPGA Engineer I to our team. If you enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA circuits and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in digital signal processing or board-level hardware design is also helpful in the role. As a principal level employee, you will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Lead FPGA design and verification efforts for space-based programs ensuring compliance with industry standards and program requirements., • Work with cross-functional teams (system engineering, hardware designers, and software engineers) to define FPGA architecture, partitioning, interface definitions, and specifications., • Develop FPGA architecture based on high level system requirements to formulate part selections and SWAP-C estimates with an emphasis on FPGA utilizations and power consumption., • Act as the subject matter expert when participating in design reviews and bringing technical expertise and insight to the team., • Mentor and guide junior FPGA designers to drive for efficiency, quality, and consistency., • Maintain pulse on emerging technologies to drive future product development for space applications.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • 9 years of industry or university research experience in the design, analysis, and implementation of FPGA systems at the HDL level., • Proficiency in VHDL and/or Verilog design capture., • Familiarity with radiation-tolerant FPGA devices (Xilinx Versal, Xilinx UltraScale+, Xilinx RFSoC, Micorsemi PolarFire, RTG-4)., • Expertise in FPGA implementation (synthesis, place and route and timing closure) and verification., • Proficient in HDL coder, Modelsim RTL simulation tools, Xilinx and Microsemi tool flows., • Strong understanding of space environment considerations and radiation effects on FPGA parts to develop mitigation techniques., • Hands-on experience with lab instruments such as digital oscilloscopes, spectrum analyzers, RF signal generators, and vector signal analyzers., • Experience with high-speed interfaces and power optimization techniques for space applications., • Proven track record of successful FPGA designs deployed in space programs., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience with worst-case analysis, failure method and criticality analyses, and reliability analysis., • Familiarity with digital communications and digital signal processing., • Experience with board-level hardware design., • Demonstrated ability to work efficiently with a distributed team., • Proficiency with git source code control.

Job DescriptionDescriptionAs a Senior Embedded Software Engineer at Impulse focused on Actuation & Control Systems, you will be responsible for developing embedded software that controls a variety of actuated systems across launch vehicles and spacecraft. These include rocket engine valves, satellite thrusters, thrust vector control actuators, and motor-driven devices such as reaction wheels and gimbals. You will collaborate with propulsion, avionics, and GNC teams to design high-performance, fault-tolerant firmware capable of operating reliably in harsh environments such as launch and space. Responsibilities • Develop real-time firmware for controlling: Rocket engine valves and thrust vector control actuators (TVCAs); Satellite propulsion systems, including cold gas and electric thrusters; and Motor-driven systems such as reaction wheels, gimbals, and momentum wheels, • Implement closed-loop control for: Position, velocity, torque, and pressure regulation; as well as Feedback via encoders, LVDTs, resolvers, current sensors, and pressure sensors, • Interface with motor drivers and redundant actuator systems using protocols like CAN, SPI, UART, Ethernet, RS-422, and BISS-C., • Design and implement safety-critical state machines for thrust sequences, valve actuation, pressurization, and safe shutdowns, • Participate in hotfire campaigns, environmental testing, and in-flight diagnostics, • Write unit-tested and reviewable production firmware for use in both testbeds and spacecraft Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or a related field., • 5+ years of embedded C/C++ development experience for electromechanical control systems, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Experience implementing real-time control loops, motor commutation, and actuator calibration routines, • Proficiency working with servo motors, stepper motors, or brushless DC motors, • Strong understanding of low-level hardware and digital interfaces (I2C, SPI, CAN, UART) Preferred Skills and Experience • Prior work on rocket engine controller software, including valve sequencing and abort logic, • Experience with satellite attitude control systems (ACS), including reaction wheels, magnetorquers, and small thrusters., • Familiarity with redundant actuator architectures and fault detection/response algorithms Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Perform radiation testing on microelectronic and optoelectronic components using gamma-rays x-rays neutrons energetic protons and energetic heavy ions. Knowledge of radiation environments and the effects of TID and SEE in microelectronics. Experience with radiation hardness-by-design and reliability

Job DescriptionDescriptionAs a Senior Embedded Software Engineer for Camera Systems at Impulse, your primary responsibility will be to design, implement, and maintain firmware for image capture and processing systems on spacecraft. You will collaborate with avionics, flight software, and GNC engineers to interface with imaging hardware, support ground and flight tests, and ensure high reliability under harsh environmental conditions. Responsibilities • Develop low-level drivers and control software for camera modules using interfaces like MIPI CSI-2, USB, SPI, and I2C, • Interface with commercial and custom image sensors, implementing robust and efficient data pipelines., • Implement camera configuration, triggering, and synchronization logic, • Support data capture and streaming during ground tests and in-flight operations, • Collaborate with image processing and perception teams to define firmware requirements and APIs, • Contribute to bring-up, debugging, and tuning of camera subsystems in hardware-in-the-loop setups Minimum Qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science, or similar, • 5+ years of experience writing C/C++ code for embedded systems, preferably in imaging or robotic applications, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack, • Strong understanding of I2C, SPI, and MIPI-based camera interfaces, • Familiarity with microcontroller and SoC architectures, especially those used in vision applications Preferred Skills and Experience • Hands-on experience integrating image sensors and camera modules into embedded systems, • Familiarity with image pipeline concepts such as exposure control, gain tuning, and calibration, • Understanding of real-time data handling and buffering for high-rate image streams Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Radiology profession with focus in Radiation Technologist (Interventional Radiology) for a 52 week contract in the Inglewood, CA area. Radiation Technologist (Interventional Radiology) experience within the last 2 years.

City of Hope's growing national system includes its Los Angeles campus, a network of clinical care locations across Southern California, a new cancer center in Orange County, California, andtreatment facilitiesin Atlanta, Chicago and Phoenix. Reinforce recommendations given to patient by healthcare

Doctor of Medicine | Oncology - Radiation Location: California Employer: Barton Associates Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position We are seeking a board-certified Radiation Oncologist for a locum tenens assignment in California beginning Dec 15, 2025. T

Doctor of Medicine | Oncology - Radiation Location: Oregon Employer: CompHealth Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position When it comes to finding the perfect locums assignment, sometimes it is all about who you know.

Doctor of Medicine | Oncology - Radiation Location: Oregon Employer: Barton Associates Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position We are seeking a board-certified or board-eligible Radiation Oncologist for a 15-day locum tenens assignment in Oregon, beginni

The radiation oncology locum tenens opportunity in California-Location: Sierra Nevada Foothills, CA (one hour south of Sacramento)-Duration: Now open on-going (90+ days with potential for extension)-Schedule: Flexible per your availability (week days only)-Hours: Monday Friday, 8a-5p -Reason for rec

Doctor of Medicine | Oncology - Radiation Location: California Employer: Barton Associates Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position We are seeking a board-certified Radiation Oncologist for a locum tenens assignment in California beginning Dec 15, 2025. T

D - CRT), intensity-modulated radiation therapy (IMRT), image-guided radiation therapy (IGRT). The therapeutic radiologic technologist (or radiation therapy technologist) shall receive and interpret prescriptions/instructions from the treating physician and carry out complex assignments while under

Proficiently and safely operates the CT simulator to produce quality images for radiation treatment procedures while adhering to radiation safety rules. Performs radiation treatment modalities required for the delivery of radiation therapy to meet goals for care by utilizing unit-based protocols and

Responsible for delivering accurately the prescribed, planned course of radiation therapy for patients of any age group inclusive of simulation, mold room duties, treatment, quality assurance, dosimetry and nursing assistance as requested by the Radiation Oncologist according to department, hospital

Saratoga Medical is looking for a part-time Radiation Therapist Technologist for Tibor Rubin VA Medical Center in Long Beach, California. Certified by ARRT in Radiation Therapy.

Responsible for delivering accurately the prescribed, planned course of radiation therapy for patients of any age group inclusive of simulation, mold room duties, treatment, quality assurance, dosimetry and nursing assistance as requested by the Radiation Oncologist according to department, hospital

Administers radiation treatment safely, in consultation with oncology team. Calibrates, operates and maintains radiation machine. Radiation Therapist Job Duties: Discusses and explains treatment plans to

DocCafe has an immediate opening for the following position: Physician - Oncology-Radiation in California.

Demonstrated success with modeling / simulation of radiation effects or radiation transport using TCAD tools, MCNP, SRIM, GEANT4, or CREME96. Radiation EffectsResearchScientist(Research Scientist/ Senior Scientist - Microelectronics/Semiconductor Engineering). Conduct innovative basic and applied re