Trabajos radiation en San Jose, CaliforniaCrear alertas

Lead Electrical Power Systems Engineer - Power Electronics San Francisco Bay Area We are supporting an innovative space company seeking a Lead Electrical Power Systems Engineer to own the design and maturation of a high-voltage spacecraft electrical power system, approximately 400V. This is a technical leadership role responsible for end-to-end EPS architecture, from solar array interfaces through regulation, storage, distribution, protection, and system integration. Key Responsibilities: • Own the detailed architecture of a high-voltage spacecraft power system., • Define solar array regulation including S3R or MPPT, battery charge and discharge, bus regulation, and distribution strategies., • Lead DC-DC converter topology selection and design, including protection schemes and derating strategy., • Address high-voltage space environment risks including plasma interaction, insulation, grounding, and compliance with relevant standards., • Perform system-level fault analysis and FMEA, define safe-mode behaviors, and support integration with control systems and high-power payloads., • Define and execute verification, integration, and qualification strategy through PDR, CDR, and flight readiness. Required Experience: • 10+ years in power electronics and spacecraft EPS design., • Strong background in high-voltage DC systems, power conversion, and fault-tolerant distribution, • Experience delivering hardware from concept through test and qualification., • Experience designing for radiation environments and high-reliability aerospace systems. This is a high-impact opportunity to architect a mission-critical spacecraft power system in a fast-paced, technically rigorous environment.

Company Description Unfortunately, specific details about Gonzales Occupational Medicine are not provided. However, applicants interested in the healthcare industry with a focus on radiology and occupational medicine are encouraged to apply. Role Description This is a full-time, on-site role located in the Santa Barbara-Santa Maria Area for a Limited License X-Ray Technician. The role involves operating X-ray equipment to capture high-quality diagnostic images, ensuring adherence to radiation safety protocols, and maintaining accurate patient records. The technician will also work closely with physicians to support medical evaluations and provide excellent patient care in compliance with clinical standards. Qualifications • Knowledge of Radiation Safety practices and protocols, • Certification and registration with the American Registry of Radiologic Technologists (ARRT), if required, • Skills in Radiology, Radiologic Technology, and the use of diagnostic imaging equipment, • Basic understanding of medical terminology and procedures, • Excellent attention to detail and organizational skills, • Strong interpersonal and communication skills to provide quality patient care, • High school diploma or GED; completion of an accredited program in radiologic technology or related field is required, • Previous experience in a clinical or occupational medicine setting is a plus

One Physics has been certified as a "Great Place to Work" 3 years in a row as well as "Best Workplaces in Healthcare" in 2022, 2023, and 2024 by Fortune. One Physics employees enjoy the support and flexibility of their roles while exhibiting a passion for excellence in all areas of their work. We create a culture where employees feel valued and ensure our communities are receiving the best-in-class treatment they deserve. The Role The Health Physicist will support medical facilities, research institutions, and industrial clients by overseeing and implementing radiation protection programs to ensure compliance with federal and state regulations, accreditation standards, and best practices in radiation safety in the San Francisco metro market. This role includes evaluating and managing occupational and public radiation exposure, conducting shielding evaluations, developing safety protocols, and advising on facility design. The Health Physicist will serve as a subject matter expert in radiation protection and will work closely with Radiation Safety Officers (RSOs), regulatory agencies, and operational staff. This role is for primary coverage in the San Francisco area and is an exempt position. In addition, this individual will have the opportunity to interface with One Physics’ administration and management team as they build upon their California presence. This role will have meaningful managerial visibility and, thus, One Physics is looking for a strong communicator, leadership skills and, ideally, some managerial background. What You’ll Do • Conduct audits and inspections of radiation safety programs to ensure compliance with NRC, state, and institutional regulations., • Develop, implement, and review Radiation Protection Programs and related procedures for medical, academic, and industrial clients., • Monitor, analyze, and interpret occupational radiation dosimetry data; provide consultation and corrective action plans for exposures exceeding ALARA thresholds., • Assist with incident response involving potential or actual radiological exposure, contamination, or loss of radioactive material., • Conduct shielding evaluations and design reviews for radiological facilities, including new construction and renovation projects., • Perform area surveys, contamination checks, and exposure assessments for controlled and unrestricted areas., • Consult with clients and regulatory bodies on licensing and registration of radioactive materials and radiation-producing devices., • Provide technical expertise during inspections by federal or state regulators and assist clients in preparing for and responding to audits., • Deliver training and educational sessions on radiation safety, ALARA principles, emergency response, and regulatory compliance to radiation workers and ancillary staff., • Serve on or support Radiation Safety Committees (RSCs) and provide technical guidance in decision-making processes., • Maintain records, prepare documentation, and generate reports required by regulatory authorities and accrediting bodies., • Support clients with radioactive waste handling, storage, and disposal, ensuring compliance with relevant regulations., • Perform additional duties, as needed. What You’ll Need • Board certification by the American Board of Health Physics (ABHP), or eligibility demonstrated through completion of a recognized training program in health physics or a related field., • Substantial experience in radiation protection, compliance auditing, and regulatory interface in medical, industrial, or academic settings., • In-depth knowledge of NRC and state regulations, NUREG guidance, and applicable ANSI, NCRP, and ICRP standards., • Strong verbal and written communication skills; ability to convey technical concepts to a variety of audiences., • Demonstrated initiative, professionalism, and organizational ability in managing projects and meeting deadlines., • Strong problem-solving skills and ability to adapt solutions to client-specific challenges., • Commitment to safety, compliance, and excellence in service. Physical Requirements A consulting physicist’s job can be physically demanding at times. A typical day may require the health physicist to remain in a stationary position for an extended period of time wearing a lead apron, lift various pieces of test equipment, move mobile diagnostic medical equipment between rooms at a facility and drive between client facilities. Drive times may exceed 60 minutes to, from and in between client facilities. The physicist must have the ability to lift 50 lb test equipment cases to a height of 3-4 feet, load and unload the cases from a vehicle and transport the equipment into and around the client facility. The physicist is expected to communicate with colleagues and clients on a frequent basis. The health physicist will operate a computer and other electronic equipment daily. Requires ability to use and move equipment. Occasional evening or weekend work. Benefits • Competitive compensation., • PTO plan with paid company holidays., • Health Insurance (Medical, Dental, Vision and Prescription)., • 401(k) Plan with company match after 1 year of employment., • Group Life & Voluntary Life Insurance., • Short Term & Long Term Disability., • Flexible Spending Account (FSA)., • Health Spending Account (HSA). Final offer amounts are determined by multiple factors, including geographic location, as well as candidate experience, education level and expertise. If you have questions on compensation, please ask your recruiter. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class.

One Physics has been certified as a "Great Place to Work" 3 years in a row as well as "Best Workplaces in Healthcare" in 2022, 2023, 2024 by Fortune. One Physics employees enjoy the support and flexibility of their roles while exhibiting a passion for excellence in all areas of their work. We create a culture where employees feel valued and ensure our communities are receiving the best-in-class treatment they deserve. The Role The Diagnostic Medical Physicist will support imaging centers and hospital departments (radiology, radiation oncology, cardiology, OR, etc.) by performing evaluations of a wide variety of imaging systems in all modalities to ensure compliance with state regulations, accreditation requirements, and relevant practice standards. The physicist will also evaluate and characterize image quality to ensure imaging equipment is operating at optimal performance levels, and provide consultation to clients regarding facility design, shielding requirements, assessment of supplemental shielding, patient and occupational radiation exposure, etc. This role is for primary coverage in the San Francisco, CA area and is an exempt position. What You’ll Do • Perform routine audits of compliance records related to the equipment registration, regulations, and Radiation Protection Programs., • Perform annual performance evaluations of radiologic imaging systems (fluoroscopy, radiography, mammography, and CT), magnetic resonance imaging (MRI) systems, ultrasound, nuclear medicine cameras, etc., • Oversee and review technologist quality control programs., • Attend scheduled hospital Radiation Safety Committee (RSC) and Radiation Protocol Committee (RPC) meetings., • Consult and/or direct staff in response to occupational and/or patient over-exposures., • Advise, support, and consult with technologists, radiologists, and Radiation Safety Officer (RSO) regarding clinical protocol management, dose assessment, and review of Radiation Protection Program Elements., • Supplement hospital training program in providing or reviewing radiation safety, and magnet safety training programs provided to ancillary staff and technologists., • Review occupational dosimetry reports for radiation workers, and consult as needed when ALARA levels are exceeded, or when there is concern about occupational exposure., • Perform assessments of public exposure in areas surrounding x-ray rooms., • Provide design, consultation, and assessment of shielding requirements. Evaluate integrity and adequacy of installed supplemental shielding., • Perform additional duties, as needed. What You’ll Need • A board certification by the American Board of Radiology in Diagnostic Medical Physics, or board eligibility as demonstrated by graduation from a CAMPEP accredited residency in diagnostic physics., • Clinical experience in diagnostic imaging that includes general radiation safety, development and review of Operating, Safety, and Emergency Procedures, and knowledge of clinical protocols., • Technical experience and understanding of state regulations, and ACR and TJC criteria, process, and compliance. Familiarity with applicable regulatory guides, and regulations., • Excellent written and verbal communication skills., • A willingness to go “above and beyond” for clients and fellow colleagues., • Demonstrate initiative, organization, and ownership of daily tasks and projects., • Ability to problem solve by seeking, developing, and implementing viable solutions. Physical Requirements A consulting physicist’s job can be physically demanding at times. A typical day may require the physicist to remain in a stationary position for an extended period of time wearing a lead apron, lift various pieces of test equipment, move mobile diagnostic medical equipment between rooms at a facility and drive between client facilities. Drive times may exceed 60 minutes to, from and in between client facilities. The physicist must have the ability to lift 50 lb test equipment cases to a height of 3-4 feet, load and unload the cases from a vehicle and transport the equipment into and around the client facility. The physicist is expected to communicate with colleagues and clients on a frequent basis. The physicist will operate a computer and other electronic equipment daily. Requires ability to use and move equipment. Occasional evening or weekend work. Benefits • Competitive compensation., • PTO plan with paid company holidays., • Health Insurance (Medical, Dental, Vision and Prescription)., • 401(k) Plan with company match after 1 year of employment., • Group Life & Voluntary Life Insurance., • Short Term & Long Term Disability., • Flexible Spending Account (FSA)., • Health Spending Account (HSA). Final offer amounts are determined by multiple factors, including geographic location, as well as candidate experience, education level and expertise. If you have questions on compensation, please ask your recruiter. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class.

Leading the future of health care Kaiser Permanente / The Permanente Medical Group The Permanente Medical Group, Inc. (TPMG - Kaiser Permanente Northern California) is one of the largest medical groups in the nation with over 10,000 physicians, 21 medical centers, numerous clinics throughout Northern and Central California and an 80-year tradition of providing quality medical care. BREAST IMAGING RADIOLOGISTS Openings in Northern & Central California We are currently seeking full-time radiologists who are breast fellowship-trained to join our collegial groups in the following locations in Northern California: • Fresno, • Oakland, • Richmond, • Sacramento, • San Jose, • Walnut Creek These positions include a predominance of breast imaging with some general radiology. The ideal candidate will be a team player who is well versed in multimodality breast imaging, as well as stereotactic and US- and MRI-guided procedures. We work closely with clinicians in the Breast Lump Clinic and collaborate with a multimodality treatment team, via weekly tumor boards, including two dedicated breast surgeons, medical and radiation oncologists, plastic surgeons, geneticists, and social workers. The breast imagers are well-supported by an administrative breast care coordinator, as well as an RN breast care navigator. Our integrated system makes it seamless to provide the best and most appropriate breast care. REQUIREMENTS: • Board Certification or Eligibility, • Must be eligible to obtain a California medical license or be currently licensed to practice within California This is an opportunity to join an experienced team in an established organization that offers a competitive salary, excellent benefits and a collaborative work environment. Full-time annual salary range is $500,040 to $520,020 plus additional potential incentives up to $144,970*. Reduced schedules with pro-rated compensation may be available. *Some incentive opportunities are estimates based on potential premium pay. With TPMG you’ll benefit from: • Work-life balance focused practice, including flexible schedules and unmatched practice support., • We can focus on providing excellent patient care without managing overhead and billing. No RVUs!, • We are committed to cultivating and preserving an inclusive environment for all physicians and employees., • Multi-specialty collaboration with a mission-driven integrated health care delivery model., • An outstanding electronic medical record system that allows flexibility in patient management., • We have a very rich and comprehensive Physician Health & Wellness Program., • We are Physician-led and develop our own leaders., • Professional development opportunities in teaching, research, mentorship, physician leadership, and community service. EXTRAORDINARY BENEFITS: • Competitive compensation and benefits package, including comprehensive vision, medical, and dental, • Interest Free Home Loan Program up to $250,000 (approval required), • Relocation Assistance up to $10,000 (approval required), • PSLF Eligible Employer, • Malpractice and Tail Insurance, • Life Insurance, • Optional Long-Term Care Insurance, • Paid holidays, sick leave, and education leave, • Shareholder track, • Three retirement plans, including a pension plan and 401(k) To learn more about these opportunities and to apply, please visit: ___ To learn more about our practice opportunities, please email your CV to Bo Chau at: or call (510) 418-9952. We are an Equal Opportunity Employer and VEVRAA Federal Contractor Connect With Us: Facebook: @TPMGPhysicianCareers LinkedIn: /company/the-permanente-medical-group/ Twitter: @TPMGDocCareers Instagram: @TPMGPhysicianCareers

Are you seeking a new opportunity where you see future growth and support? Where people matter, things are done right, workplace excellence and working together for the community? Cornerstone Staffing Solutions – On behalf of our client, we are looking for you! Radiologic Technologist (Multimodality) Location: Los Gatos, CA Pay Range: $60.00 – $80 /hour (DOE) - Stipend program available for qualifying candidates Schedule: Monday – Friday | 8:00 AM – 5:00 PM Position Type: Contract with potential for extension or permanent placement Position Overview Cornerstone Staffing Solutions is seeking a skilled and detail-oriented Radiologic Technologist on behalf of our client in the Los Gatos, CA area. This role offers the opportunity to work in a collaborative outpatient setting, supporting physicians and clinical teams through high-quality diagnostic imaging services. The ideal candidate will bring strong technical expertise, a patient-centered approach, and the ability to work efficiently in a fast-paced healthcare environment. Key Responsibilities Diagnostic Imaging • Perform a variety of radiologic procedures, including routine and specialized imaging, • Operate radiographic equipment such as standard X-ray, fluoroscopy, and portable imaging units, • Assist physicians with advanced imaging procedures, including those involving contrast media, • Ensure proper patient positioning and technique to achieve accurate diagnostic results Patient Care • Explain imaging procedures clearly to patients to ensure understanding and comfort, • Apply radiation safety standards, including ALARA principles, • Adjust imaging techniques based on patient needs, anatomy, and physician orders Quality Assurance and Compliance • Review images for accuracy, quality, and proper identification prior to submission, • Follow all regulatory, safety, and HIPAA compliance standards, • Perform routine equipment checks and report maintenance concerns as needed Documentation and Workflow • Accurately document procedures, imaging results, and patient interactions, • Maintain logs, reports, and required documentation in accordance with regulations, • Support departmental workflow and assist with additional duties as assigned Required Qualifications • Associate degree in Radiologic Technology or related field, • Active California Certified Radiologic Technologist (CRT) license, • Current ARRT (R) certification, • Current BLS certification, • Minimum of two years of diagnostic radiology experience, • Experience working with EMR systems, • Familiarity with PACS and RIS systems, • Strong communication and organizational skills Preferred Qualifications • Experience with EPIC EMR, • Background in outpatient or ambulatory care settings, • Ability to manage multiple priorities in a high-volume environment

About Quality Temp Staffing Quality Temp Staffing is a family-owned, small business. We are proudly Latino and veteran-owned, built on the belief that “we work to live, not live to work.” For over 35 years, we’ve proudly served Los Angeles County, committed to our communities—helping our employees and their families by providing individuals with opportunities to grow, thrive, and build meaningful careers in the medical field. Through personalized support and a deep understanding of the unique needs of both our clients and staff, we continue to connect top talent with the facilities that need them most. “Quality Jobs. Quality People.” General Job Information Department: Radiology Scheduled Hours: 0800-1630, 1600-0030 Shift: Day or Evening available Working Days: M-F, available weekends and holidays Location: Los Angeles, 90033 Salary Range: $42-$47 Status: Ongoing Our Core Values • Fostering Work-Life Harmony, • We support flexibility and work environments that recognize the importance of personal time, family, and overall well-being., • Professionalism, • We uphold the highest standards in how we operate and who we place. Our team and the professionals we represent act with integrity, accountability, and respect., • Integrity & Trust, • We’ve earned our reputation by being honest, dependable, and transparent—with our employees, clients, and the communities we serve., • Empowerment Through Opportunity, • We believe in giving people a chance—whether you're a certified new grad or someone looking to re-enter the workforce. Everyone deserves the opportunity to grow, contribute, and succeed., • Excellence in Patient Care, • Every placement we make reflects our commitment to safe, compassionate, and high-quality care for every patient. Our Commitment to Your Well-Being ✅ Comprehensive Health Coverage – Medical, dental, and vision plans, life insurance, and supplemental coverage ✅ Retirement Plans – 401(k), Employer Match of up to 4% of contributions ✅ Work-Life Balance – Employee discounts and flexible scheduling ✅ Mental Health and Family Support – Employee Assistance Program (EAP) with: • Mental health support resources, • Child and elder care resources, • Adoption assistance, • Financial wellness programs, • Life and wellness coaches, • And much, much more! What you will do We are currently seeking a highly motivated and compassionate Radiologic Technologist to join our growing healthcare team. This individual will play a critical role in patient care by producing high-quality diagnostic images that assist physicians in diagnosing and treating medical conditions. The ideal candidate is patient-focused, detail-oriented, and committed to maintaining the highest standards of safety and professionalism in all aspects of radiologic procedures. X-Ray Tech Summary of Job Duties: • Prepare and position patients for imaging procedures, explain processes, and address concerns., • Perform various diagnostic imaging procedures, adjusting equipment to optimize image quality while minimizing radiation exposure., • Follow radiation safety protocols and use protective devices to ensure safety., • Maintain and ensure imaging equipment functions correctly, reporting any issues., • Maintain accurate patient records and input data into the EHR system., • Implement quality control measures to ensure reliable diagnostic images., • Stay updated on radiologic technology advancements and participate in ongoing education., • Ensure adherence to CA DPH regulations and hospital policies, maintaining licensures and training. Qualifications: • Minimum one year experience as a RT technologist in a hospital, • Must be available rotating weekends and holidays, • Associate Degree or Bachelor Degree in Radiologic Technology, • American Registry of Radiologic Technology (ARRT) (R), • California Dept. of Public Health (CRT), • California Dept. of Public Health Fluoroscopy Permit, • Proof of Continuing Education Units (CEU’s) if applicable, • Current CPR Card issued by American Heart Association (AHA) or American Red Cross, • Must have proof of MMR, Varicella vaccinations or titers., • Must have Proof of TB/PPD or Chest X-ray within the past 12 Months, • Current Annual Health Clearance Quality Temp Staffing is an Equal Opportunity Employer and values diversity in the workplace. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability. At this time, Quality Temp Staffing does not offer employment-based visa sponsorship. We are only accepting applications from individuals who are U.S. citizens, lawful permanent residents (green card holders), or those who currently hold a valid and active U.S. work visa that permits employment without the need for employer sponsorship. All applicants must be authorized to work in the United States without the need for current or future sponsorship. Quality Temp Staffing is committed to complying with the Americans with Disabilities Act (ADA). If you require reasonable accommodations during any part of the application or hiring process due to a disability, please contact our Human Resources department at to request assistance. We are happy to work with you to ensure accessibility throughout the hiring process. All employment offers are contingent upon the successful completion of a background check and, if applicable, a drug screening, in accordance with applicable laws. Due to the sensitive nature of the work, confidentiality and adherence to HIPAA and other privacy standards are required. Employment with Quality Temp Staffing is at-will. This means that either the employee or the employer may terminate the employment relationship at any time, with or without notice or cause, as permitted by law. Fraud Alert: All official communications from Quality Temp Staffing will originate from an email address ending in @qualitytempstaffing.com. Emails from other domains not explicitly mentioned do not represent Quality Temp Staffing and should be considered fraudulent. We strongly advise candidates not to engage with any communications outside of these parameters. If you suspect fraudulent activity, please report it to us immediately at .

Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards. Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation. What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication. Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding. Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields. Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

We anticipate the application window for this opening will close on - 29 May 2026 At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You'll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. A Day in the Life We are seeking a committed professional to join our team. While this is a remote position not located at a physical Medtronic site, the candidate hired will be required to reside within the territory and drive to multiple accounts throughout the region. A valid driver's license is essential for this role. Join Medtronic as an Affera Mapping Specialist and be at the forefront of transforming lives through advanced medical technology! In this dynamic role, you'll work alongside a collaborative team of clinicians, engineers, physicians, and innovators to execute mapping solutions for cardiac and other electrophysiological systems. By blending technical expertise with a passion for improving patient outcomes, you'll have the opportunity to impact global healthcare directly. If you're driven by precision, problem-solving, and the chance to make a tangible difference in people's lives, this is your opportunity to grow your career while shaping the future of medical innovation at Medtronic. To find all CAS Mapping roles available please use #casmap in the key word search at Medtronic Careers () Various levels available based on qualifications and experience Responsibilities may include the following and other duties may be assigned. * Provide clinical and technical support and training to physicians and staff on the EP mapping and navigation system and all CAS products. * Educate and train physicians, hospital personnel and office staff on technical matters relating to CAS products and related procedures. * Promote the safe and effective use of Medtronic CAS products and related procedures. * Understand and support national, regional and territory sales objectives to achieve or exceed sales goals within all CAS products. * Develop and cultivate customer relationships resulting in incremental business. * Work in partnership with Account Manager, Regional Manager and Area Directors to identify potential sales opportunities. * Collaborate and strategize with local sales team to conduct customer training for mapping and other CA Solutions products. * Collaborate and communicate with the sales and clinical teams in the region. * Serves as an effective Medtronic CAS representative to physicians and support staff regarding Medtronic CAS products, service and support. * Serve as a regional champion to share your experience and influence others to be proficient in the mapping technology. ? The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. We seek out and hire a diverse workforce at every level: We need fresh ideas and inclusive insights to continue to be an innovative industry leader -that's why we make it a point to seek out, attract and develop employees who are patient-centric, passionate, and who represent the same wide variety of life experiences as our patients. To learn more about Inclusion & Diversity at Medtronic Click Here () Required Qualifications To be considered for this role, please ensure these minimum requirements are evident on your resume. * High school diploma PLUS a minimum of 8 years of relevant work experience in cardiac mapping and navigation. OR * Associate degree PLUS a minimum of 6 years of relevant work experience in cardiac mapping and navigation. OR * Bachelor degree plus a minimum of 4 years of relevant work experience in cardiac mapping and navigation. Preferred Qualifications * B.A./B.S. Degree in nursing, cardiovascular, life sciences, or technical discipline with minimum of four years work experience in cardiac field, hospital/clinic or sales. * Proven track record with technical training assignments. * Experience in the cardiac catheter ablation field, EP lab, in a hospital/clinic or EP medical sales providing technical / clinical support. Additional Job Requirements * Environmental exposure to infectious disease and radiation * Clinical Specialists are required to be within their assigned territory each day to be available as unscheduled needs arise * Clinical Specialists will on occasion be required to travel outside of their assigned territory and possibility overnight * Must have a valid driver's license * Ability to freely move throughout the facility, use a phone, keyboard and mouse, visually able to interact with personal computers * Must be able to stand/sit/walk for 8 hours a day * Ability to travel up to 25% Must have a valid driver's license and active vehicle insurance policy. In addition, your driving record will be reviewed and will be considered as part of your application. Must be able to drive approximately 25-50% of the time within assigned territory and may require overnight travel. Cardiac Ablation Solutions offers cardiac mapping and ablation solutions to treat patients with abnormal heart rhythms. Our vision is to help patients worldwide by advancing innovation for the diagnosis and ablation of cardiac arrhythmias, enabling clinicians to perform procedures with superior outcomes. #LI-MDT For Baccalaureate degrees earned outside of the United States, a degree that satisfies the requirements of 8 C.F.R. § 214.2(h)(4)(iii)(A) is required. Physical Job Requirements The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. For Office Roles: While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer, and communicate with peers and co-workers. Contact your manager or local HR to understand the Work Conditions and Physical requirements that may be specific to each role. U.S. Work Authorization & Sponsorship At Medtronic, we are committed to fostering an environment where employees can thrive and make a meaningful impact. In alignment with our enterprise-wide workforce planning approach, U.S. work authorization sponsorship (H-1B, TN, J, etc.) is offered exclusively for Principal-level roles and above, where specialized expertise aligns with long-term business needs. Roles below the Principal level require candidates to possess unrestricted U.S. work authorization at the time of hire and for the duration of employment. Join us in our mission to alleviate pain, restore health, and extend life-where your unique background and perspective are valued. Benefits & Compensation Medtronic offers a competitive Salary and flexible Benefits Package A commitment to our employees lives at the core of our values. We recognize their contributions. They share in the success they help to create. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage. Salary ranges for U.S (excl. PR) locations (USD):$130,000.00 - $140,000.00 The base salary range is applicable across the United States, excluding Puerto Rico and specific locations in California. The offered rate complies with federal and local regulations and may vary based on factors such as experience, certification/education, market conditions, and location. Compensation and benefits information pertains solely to candidates hired within the United States (local market compensation and benefits will apply for others). In addition to Base Salary, this position is eligible for a Sales Incentive Plan (SIP), which provides the opportunity to earn significant incentive compensation for achieving or exceeding your goals. The following benefits and additional compensation are available to those regular employees who work 20+ hours per week: Health, Dental and vision insurance, Health Savings Account, Healthcare Flexible Spending Account, Life insurance, Long-term disability leave, Dependent daycare spending account, Tuition assistance/reimbursement, and Simple Steps (global well-being program). The following benefits and additional compensation are available to all regular employees: Incentive plans, 401(k) plan plus employer contribution and match, Short-term disability, Paid time off, Paid holidays, Employee Stock Purchase Plan, Employee Assistance Program, Non-qualified Retirement Plan Supplement (subject to IRS earning minimums), and Capital Accumulation Plan (available to Vice Presidents and above, or subject to IRS earning minimums). Regular employees are those who are not temporary, such as interns. Temporary employees are eligible for paid sick time, as required under applicable state law, and the Employee Stock Purchase Plan. Please note some of the above benefits may not apply to workers in Puerto Rico. Medtronic benefits and compensation plans () About Medtronic We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions. Our Mission - to alleviate pain, restore health, and extend life - unites a global team of 95,000+ passionate people. We are engineers at heart- putting ambitious ideas to work to generate real solutions for real people. From the R&D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary. Learn more about our business, mission, and our commitment to diversity here () . It is the policy of Medtronic to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Medtronic will provide reasonable accommodations for qualified individuals with disabilities. If you are applying to perform work for Medtronic, Inc. ("Medtronic") in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here () a list of all material job duties of the specific job position which Medtronic reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Medtronic will consider for employment qualified job applicants with arrest or conviction records in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions. Our Mission - to alleviate pain, restore health, and extend life - unites a global team of 95,000+ passionate people. We are engineers at heart- putting ambitious ideas to work to generate real solutions for real people. From the R&D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary. We change lives . Each team member, each day, helps to improve and redefine how the world treats the most pressing health conditions, from heart disease to diabetes. Our industry leadership comes from the passion and ingenuity of our people. That's who we are. Working alongside one another, we use science, medicine, and a profound understanding of the human body to build extraordinary technologies that can transform lives. We build extraordinary solutions as one team . With one Medtronic Mindset defining how we work. Speed and decisiveness run through our DNA. Diverse perspectives inspire our bold answers to any challenge that comes our way. And we deliver results the right way, breakthrough after patient breakthrough. This life-changing career is yours to engineer . By bringing your ambitious ideas, unique perspective and contributions, you will... * Build a better future, amplifying your impact on the causes that matter to you and the world * Grow a career reflective of your passion and abilities * Connect to a dynamic and inclusive culture that welcomes the challenge of life-long learning Experiences that put people first . Respect for people is the hallmark of our humanity. It fuels our team to positively impact even a single life. And it means we put our people first at Medtronic as well, creating a culture of belonging and always pushing to get you the career-building resources you need. Life-transforming technologies . No matter your role, you contribute to technologies that transform lives. What we build empowers patients to live life on their terms. Better outcomes for our world . Here, it's about more than the bottom line. Our Mission to improve human welfare drives us. We advance healthcare, society, and equity with every design, inside and outside our walls. Insight-driven care . Fresh viewpoints. Cutting-edge AI, data, and automation. You're shaping the future of healthcare technology and defining the next generation of breakthroughs in care It is the policy of Medtronic to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Medtronic will provide reasonable accommodations for qualified individuals with disabilities. For sales reps and other patient facing field employees, going into a healthcare setting is considered an essential function of the job and we expect our employees to comply with all credentialing requirements at the hospitals or clinics they support. This employer participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here () . For updates on job applications, please go to the candidate login page and sign in to check your application status. If you need assistance completing your application please email To request removal of your personal information from our systems please email

Well established cutting edge manufacturing company seeking an experienced Spacecraft Manufacturing Engineer to join our growing team! This Jobot Job is hosted by: Josh Rabinowitz Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $180,000 per year A bit about us: We are seeking a highly motivated Spacecraft Manufacturing Engineer to support the build, integration, and production of next-generation spacecraft systems. This role will play a critical part in transitioning designs from engineering into scalable, high-quality manufacturing processes, ensuring mission-critical hardware is built to the highest standards of reliability and performance. If this sounds like the opportunity for you and you're ready for your next challenge please read on! Why join us? • Competitive Base Salary! - $165,000-$185,000 Base, • Extremely Competitive Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!Job Details, • Proficient in schematic capture and PCB layout using Altium Designer, • Experience designing electronics for the space environment (LEO, GEO, and deep space), including radiation, thermal, and vibration considerations, • Skilled in defining spacecraft avionics architectures and developing system budgets, • Experience planning and executing radiation test campaigns, • Familiarity with embedded software development, • High-speed digital design (FPGAs, microprocessors, high-speed memory, communication buses), • Power electronics (power converters, load switches, etc.), • RF electronics (mixers, local oscillators, power amplifiers) Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

You will collaborate closely with silicon architecture, circuit design, validation, software, and firmware teams to ensure reliability considerations are incorporated into device architecture and platform capabilities. Collaborate with silicon architecture, circuit design, validation, software, and

At Stanford Health Care, we see our allied health practitioners as critical contributors to our pioneering services. At Stanford Health Care, we seek to provide patients with the very best in diagnosis and treatment, with outstanding quality, compassion and coordination. With an unmatched track reco

Accurately delivers and records radiation therapy treatments under the direction of a radiation oncologist and chief radiation therapist. Must hold valid state license for radiation therapy. Radiation Therapist I : requires 0-3 years experience actively practicing as an RTT.

Heart of Silicon Valley! 45 minutes from the beach! Provides the opportunity to work in with a well-established facility, professional team of dedicated staff committed to provide the best patient care in Radiation Oncology.

Under the direction of a supervising physician, the Physician Assistant provides high quality, efficient, team based patient focused care. The Physician Assistants responsibilities may include managing patients in the office, hospital, ED and/or perioperative setting. The Physician Assistant may be required to First Assist in the OR or perform other department specific procedures. The Physician Assistant may also facilitate on call responsibilities for his/her supervising physician. The Physician Assistants daily responsibilities may vary based upon the department & supervising physician needs and may require evening or weekend work hours. * The Physician Assistant will practice as part of a team under the direction of their supervising physician. * Primary Duties will be inclusive of the following but not limited to: * Examines patient, performs comprehensive physical examination, and compiles patient medical data, including health history and results of physical examination. * Administers or orders diagnostic tests, such as imaging studies, electrocardiogram, and laboratory tests, and interprets test results for deviations from normal. * Performs therapeutic procedures such as injections, immunizations, suturing and wound care, and managing infection. * Performs other department specific diagnostic or therapeutic procedures. * Develops and implements patient management plans, records progress notes, and assists in provision of continuity of care. * Instructs and counsels patients regarding compliance with prescribed therapeutic regimens, normal growth and development, family planning, emotional problems of daily living, and health maintenance and other relevant patient education. * Based upon Specific Specialty, additional duties may include the following: * Facilitate admissions, transfers, discharges * First assist in surgeries or perform procedures as applicable * Round on inpatients * Performs admission evaluation on patients to include: obtaining basic medical information and history, reviewing patients medical record, performing physical exam, documenting findings into patient medical record, and reporting deviations from normal findings to attending physician. * Provides patient and family with pre-operative/pre-procedure and other pertinent education. * Answers questions regarding surgery or procedures, recovery and risk factor modification; provides blood transfusion information as applicable; performs peri-operative procedures; locates and utilizes diagnostic images, instruments and pertinent patient information. * Reviews patient chart noting allergies, pertinent medical history, and abnormal physical findings. * Assists in performing surgical procedures and other procedures consistent with the standards of care and practice guidelines: * Depending on the specialty, may work as the First Assist during surgical procedures, start IVs, and/or perform suturing. * Performs post-operative procedures to include entering standard post-operative orders into patient medical records; assists physicians with evaluation and management of patients status during recovery; reviews vital signs, laboratory and diagnostic studies; assists with management of patients. * Facilitates patient discharge; dictates discharge and transfer summaries in a timely manner. Experience Physician Assistant License (California) required at hire * Physician Assistant National Certificate required at hire * Basic Life Support * National Provider Identifier required at hire Additional Requirements: * Fluoroscopy Permit required, or must be obtained within 18 months from the date of hire in Orthopedics, Interventional Radiology, and Radiation Oncology only. * May be required to have experience and competency in performing specific tasks required by department. * Must be able to work in a Labor/Management Partnership environment. Preferred Qualifications: TITLE: Physician Assistant - Orthopedics LOCATION: San Jose, California REQNUMBER: 1399963 External hires must pass a background check/drug screen. Qualified applicants with arrest and/or conviction records will be considered for employment in a manner consistent with Federal, state and local laws, including but not limited to the San Francisco Fair Chance Ordinance. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, protected veteran, or disability status.

We anticipate the application window for this opening will close on - 28 Apr 2026 At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You'll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. A Day in the Life We are seeking a committed professional to join our team. While this is a remote position not located at a physical Medtronic site, the candidate hired will be required to reside within the territory and drive to multiple accounts throughout the region. A valid driver's license is essential for this role. Join Medtronic as an Affera Mapping Specialist and be at the forefront of transforming lives through advanced medical technology! In this dynamic role, you'll work alongside a collaborative team of clinicians, engineers, physicians, and innovators to execute mapping solutions for cardiac and other electrophysiological systems. By blending technical expertise with a passion for improving patient outcomes, you'll have the opportunity to impact global healthcare directly. If you're driven by precision, problem-solving, and the chance to make a tangible difference in people's lives, this is your opportunity to grow your career while shaping the future of medical innovation at Medtronic. To find all CAS Mapping roles available please use #casmap in the key word search at Medtronic Careers () Various levels available based on qualifications and experience Responsibilities may include the following and other duties may be assigned. * Provide clinical and technical support and training to physicians and staff on the EP mapping and navigation system and all CAS products. * Educate and train physicians, hospital personnel and office staff on technical matters relating to CAS products and related procedures. * Promote the safe and effective use of Medtronic CAS products and related procedures. * Understand and support national, regional and territory sales objectives to achieve or exceed sales goals within all CAS products. * Develop and cultivate customer relationships resulting in incremental business. * Work in partnership with Account Manager, Regional Manager and Area Directors to identify potential sales opportunities. * Collaborate and strategize with local sales team to conduct customer training for mapping and other CA Solutions products. * Collaborate and communicate with the sales and clinical teams in the region. * Serves as an effective Medtronic CAS representative to physicians and support staff regarding Medtronic CAS products, service and support. * Serve as a regional champion to share your experience and influence others to be proficient in the mapping technology. ? The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. We seek out and hire a diverse workforce at every level: We need fresh ideas and inclusive insights to continue to be an innovative industry leader -that's why we make it a point to seek out, attract and develop employees who are patient-centric, passionate, and who represent the same wide variety of life experiences as our patients. To learn more about Inclusion & Diversity at Medtronic Click Here () Required Qualifications To be considered for this role, please ensure these minimum requirements are evident on your resume. * High school diploma PLUS a minimum of 6 years of relevant work experience in cardiac mapping and navigation. OR * Associate degree PLUS a minimum of 4 years of relevant work experience in cardiac mapping and navigation. OR * Bachelor degree PLUS a minimum of 2 years of relevant work experience in cardiac mapping and navigation. Preferred Qualifications * B.A./B.S. Degree in nursing, cardiovascular, life sciences, or technical discipline with minimum of four years work experience in cardiac field, hospital/clinic or sales. * Proven track record with technical training assignments. * Experience in the cardiac catheter ablation field, EP lab, in a hospital/clinic or EP medical sales providing technical / clinical support. Additional Job Requirements * Environmental exposure to infectious disease and radiation * Clinical Specialists are required to be within their assigned territory each day to be available as unscheduled needs arise * Clinical Specialists will on occasion be required to travel outside of their assigned territory and possibility overnight * Ability to freely move throughout the facility, use a phone, keyboard and mouse, visually able to interact with personal computers * Must be able to stand/sit/walk for 8 hours a day * Ability to travel up to 25% Must have a valid driver's license and active vehicle insurance policy. In addition, your driving record will be reviewed and will be considered as part of your application. Must be able to drive approximately 25-50% of the time within assigned territory and may require overnight travel. Cardiac Ablation Solutions offers cardiac mapping and ablation solutions to treat patients with abnormal heart rhythms. Our vision is to help patients worldwide by advancing innovation for the diagnosis and ablation of cardiac arrhythmias, enabling clinicians to perform procedures with superior outcomes. For Baccalaureate degrees earned outside of the United States, a degree that satisfies the requirements of 8 C.F.R. § 214.2(h)(4)(iii)(A) is required. Physical Job Requirements The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. For Office Roles: While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer, and communicate with peers and co-workers. Contact your manager or local HR to understand the Work Conditions and Physical requirements that may be specific to each role. U.S. Work Authorization & Sponsorship At Medtronic, we are committed to fostering an environment where employees can thrive and make a meaningful impact. In alignment with our enterprise-wide workforce planning approach, U.S. work authorization sponsorship (H-1B, TN, J, etc.) is offered exclusively for Principal-level roles and above, where specialized expertise aligns with long-term business needs. Roles below the Principal level require candidates to possess unrestricted U.S. work authorization at the time of hire and for the duration of employment. Join us in our mission to alleviate pain, restore health, and extend life-where your unique background and perspective are valued. Benefits & Compensation Medtronic offers a competitive Salary and flexible Benefits Package A commitment to our employees lives at the core of our values. We recognize their contributions. They share in the success they help to create. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage. Salary ranges for U.S (excl. PR) locations (USD):$120,000.00 - $125,000.00 The base salary range is applicable across the United States, excluding Puerto Rico and specific locations in California. The offered rate complies with federal and local regulations and may vary based on factors such as experience, certification/education, market conditions, and location. Compensation and benefits information pertains solely to candidates hired within the United States (local market compensation and benefits will apply for others). In addition to Base Salary, this position is eligible for a Sales Incentive Plan (SIP), which provides the opportunity to earn significant incentive compensation for achieving or exceeding your goals. The following benefits and additional compensation are available to those regular employees who work 20+ hours per week: Health, Dental and vision insurance, Health Savings Account, Healthcare Flexible Spending Account, Life insurance, Long-term disability leave, Dependent daycare spending account, Tuition assistance/reimbursement, and Simple Steps (global well-being program). The following benefits and additional compensation are available to all regular employees: Incentive plans, 401(k) plan plus employer contribution and match, Short-term disability, Paid time off, Paid holidays, Employee Stock Purchase Plan, Employee Assistance Program, Non-qualified Retirement Plan Supplement (subject to IRS earning minimums), and Capital Accumulation Plan (available to Vice Presidents and above, or subject to IRS earning minimums). Regular employees are those who are not temporary, such as interns. Temporary employees are eligible for paid sick time, as required under applicable state law, and the Employee Stock Purchase Plan. Please note some of the above benefits may not apply to workers in Puerto Rico. Medtronic benefits and compensation plans () About Medtronic We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions. Our Mission - to alleviate pain, restore health, and extend life - unites a global team of 95,000+ passionate people. We are engineers at heart- putting ambitious ideas to work to generate real solutions for real people. From the R&D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary. Learn more about our business, mission, and our commitment to diversity here () . It is the policy of Medtronic to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Medtronic will provide reasonable accommodations for qualified individuals with disabilities. If you are applying to perform work for Medtronic, Inc. ("Medtronic") in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here () a list of all material job duties of the specific job position which Medtronic reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Medtronic will consider for employment qualified job applicants with arrest or conviction records in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions. Our Mission - to alleviate pain, restore health, and extend life - unites a global team of 95,000+ passionate people. We are engineers at heart- putting ambitious ideas to work to generate real solutions for real people. From the R&D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary. We change lives . Each team member, each day, helps to improve and redefine how the world treats the most pressing health conditions, from heart disease to diabetes. Our industry leadership comes from the passion and ingenuity of our people. That's who we are. Working alongside one another, we use science, medicine, and a profound understanding of the human body to build extraordinary technologies that can transform lives. We build extraordinary solutions as one team . With one Medtronic Mindset defining how we work. Speed and decisiveness run through our DNA. Diverse perspectives inspire our bold answers to any challenge that comes our way. And we deliver results the right way, breakthrough after patient breakthrough. This life-changing career is yours to engineer . By bringing your ambitious ideas, unique perspective and contributions, you will... * Build a better future, amplifying your impact on the causes that matter to you and the world * Grow a career reflective of your passion and abilities * Connect to a dynamic and inclusive culture that welcomes the challenge of life-long learning Experiences that put people first . Respect for people is the hallmark of our humanity. It fuels our team to positively impact even a single life. And it means we put our people first at Medtronic as well, creating a culture of belonging and always pushing to get you the career-building resources you need. Life-transforming technologies . No matter your role, you contribute to technologies that transform lives. What we build empowers patients to live life on their terms. Better outcomes for our world . Here, it's about more than the bottom line. Our Mission to improve human welfare drives us. We advance healthcare, society, and equity with every design, inside and outside our walls. Insight-driven care . Fresh viewpoints. Cutting-edge AI, data, and automation. You're shaping the future of healthcare technology and defining the next generation of breakthroughs in care It is the policy of Medtronic to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Medtronic will provide reasonable accommodations for qualified individuals with disabilities. For sales reps and other patient facing field employees, going into a healthcare setting is considered an essential function of the job and we expect our employees to comply with all credentialing requirements at the hospitals or clinics they support. This employer participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here () . For updates on job applications, please go to the candidate login page and sign in to check your application status. If you need assistance completing your application please email To request removal of your personal information from our systems please email

Job Description Achievement Engineering Corp. (Achieveng) is looking to hire SPECIAL INSPECTORS to join our team! We have many large projects on the horizon and, currently, we are looking to hire full-time Special Inspectors for our projects in the Bay Area, CA. If you meet / possess the following criteria - we want to hear from you! Candidates for this position MUST POSSESS the following certifications: • American Concrete Institute (ACI) Concrete Field Testing Technician - Grade 1 Certification, • Any / all other ICC Special Inspector Certifications, • Any / all other ACI Certifications, • Nuclear Gauge & Radiation Safety Training, • American Welding Society – Certified Welding Inspector (CWI) Certification, • OSHA Safety Training, • Minimum education of a High School Diploma or Equivalent., • Available in/near the San Francisco Bay Area, CA., • A valid & clean Class C Driver License issued by the California DMV., • The ability to read and interpret construction plans & specifications, and to enforce their applications., • The ability to keep records & prepare reports., • The ability to communicate clearly and concisely through oral methods, such as in-person and/or by telephone, & through written methods, such as via email., • A comfortable proficiency with Microsoft Word & Excel, and also Adobe Acrobat., • Be able & open to learning & applying specific provisions of applicable codes, ordinances, & regulations mandated by appropriate jurisdictions., • The ability to perform inspections by applying technical knowledge & following proper inspection techniques to examine workmanship and materials, as well as to detect deviations from plans, regulations, & standard construction practices., • The ability to adapt to different working conditions (i.e. sitting, walking, in/outdoor settings, open/closed spaces, etc.)., • The ability to lift and/or carry a maximum of 50 pounds., • Competitive Wages, • Paid Vacation, Sick Leave, & Holidays, • Health, Vision, & Dental Insurance, • Retirement Plan with Employer Matching, • Continuing Education Opportunities & Reimbursement, • Your most recent resume

Job Description Responsibilities: • Perform radiographic exams using portable x-ray equipment and other diagnostic imaging technology, • Set up and position patients for exams according to established protocols, • Follow radiation safety guidelines and maintain equipment according to manufacturer's recommendations, • Communicate with patients and caregivers to explain the exam process and answer any questions or concerns, • Maintain accurate and complete documentation of exams and patient information, • Collaborate with other healthcare professionals to ensure the best possible care for patients, • Associate's or Bachelor's degree in Radiologic Technology, • Current state license and ARRT Required (American Registry of Radiologic Technologists) certification as a Radiologic Technologist (RT), • 1 year experience, • Strong communication and interpersonal skills, • Ability to work independently and manage time effectively, • Flexibility to work at various locations and potentially travel to multiple sites in a single day License/Certification: • BLS Certification (Preferred), • State License for X-ray (Required), • ARRT Certification (Required), • Work Location: On the road, • PAY BASED ON EXPERIENCE *

Job Description Please note relocation is required for this role to: Odessa, TX CT Tech Full-Time Position Night Shift (5 x 8 hours shifts per week, 11pm - 7:30am) $10,000 SignOn Bonus!! Job Summary: • Obtains patient history, explains standard procedures, and addresses patient concerns, • Produces computerized tomographic scanner radiographs of specific areas as required by the departmental procedures, • Performs ultrasound examinations, abdominal scans, retroperitoneal scans, and radiation therapy localization, • Relies on experience and judgment to plan and accomplish goals, • Performs a variety of tasks, • Works under general supervision, • certain degree of creativity and latitude is required, • Associates degree and completion of radiologic technology training, • A.R.R.T. registration required, • 3+ years of experience., • Competitive salary and benefits package, • Opportunities for professional development and advancement, • Supportive work environment with a collaborative team, • Comprehensive healthcare coverage, • Retirement savings plan, • Paid time off and flexible scheduling options Odessa Regional Medical Center was founded in 1975 as Odessa Women’s and Children’s Hospital. Through the years, the hospital grew and evolved into a full-service healthcare facility and the name was changed to Odessa Regional Medical Center to reflect its larger campus and more comprehensive services. The hospital has 225 beds and has approximately 250 physicians on staff and has over 700 employees. Today, ORMC offers a wide spectrum of healthcare services, including advanced diagnostic imaging technology, emergency care, innovative surgical procedures, maternity care, comprehensive cardiac services and general medical care. #ZR #EXP

Job Description Please note relocation is required for this role to: Odessa, TX Radiology Tech Full-Time Position Monday - Friday 3:00pm - 11:30pm Evening Shift Job Summary: • Arranges patients for radiological examinations, • Produces radiographs (x-rays) to aid in the diagnosis of medical problems, • Prevents patient from being exposed to unnecessary radiation, • Relies on instructions and pre-established guidelines to perform the functions of the job, • Works under immediate supervision, • A certain degree of creativity and latitude is required, • Typically reports to a chief technologist or manager, • Associate's degree from an accredited program required; bachelor's degree preferred, • Registration as a technologist by the A.R.R.T. required, • Has knowledge of commonly used concepts, practices, and procedures within a particular field, • Competitive salary and benefits package, • Opportunities for professional development and advancement, • Supportive work environment with a collaborative team, • Comprehensive healthcare coverage, • Retirement savings plan, • Paid time off and flexible scheduling options Odessa Regional Medical Center was founded in 1975 as Odessa Women’s and Children’s Hospital. Through the years, the hospital grew and evolved into a full-service healthcare facility and the name was changed to Odessa Regional Medical Center to reflect its larger campus and more comprehensive services. The hospital has 225 beds and has approximately 250 physicians on staff and has over 700 employees. Today, ORMC offers a wide spectrum of healthcare services, including advanced diagnostic imaging technology, emergency care, innovative surgical procedures, maternity care, comprehensive cardiac services and general medical care. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Odessa Regional Medical Center was founded in 1975 as Odessa Women’s and Children’s Hospital. Through the years, the hospital grew and evolved into a full-service healthcare facility and the name was changed to Odessa Regional Medical Center to reflect its larger campus and more comprehensive services. The hospital has 225 beds and has approximately 250 physicians on staff and has over 700 employees. Today, ORMC offers a wide spectrum of healthcare services, including advanced diagnostic imaging technology, emergency care, innovative surgical procedures, maternity care, comprehensive cardiac services and general medical care. #ZR #EXP

Job DescriptionCompany Description At WD, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, WD is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that—our technology helped people put a man on the moon and capture the first-ever picture of a black hole. We offer an expansive portfolio of technologies, HDDs, and platforms for business, creative professionals, and consumers alike under our Western Digital®, WD®, and WD_BLACK™. We are a key partner to some of the largest and highest-growth organizations in the world. From enabling systems to make cities safer and more connected, to powering the data centers behind many of the world’s biggest companies and hyperscale cloud providers, to meeting the massive and ever-growing data storage needs of the AI era, WD is fueling a brighter, smarter future. Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage. Job Description The job opening is for a full-time Research Staff Member in the Design Group in Western Digital's research department. The role will be a part of a multi-functional team whose aim is to develop and eventually commercialize Western Digital's strategic radiation hardened memory technology. The responsibilities for the role will include: • Developing high density memory chip custom layout, • Including shared operational circuitry along with at pitch line drivers, • All phases of chip design layout to be included: From architecture definition, density and performance optimization, final verification up to and including tape out, • Running and Debugging Physical Verification flows including DRC, LVS, ERC and Antenna Checks, • Minimize parasitic resistance and capacitance (R and C) in critical paths to meet timing and power consumption specifications, • Comprehend and address reliability engineering issues such as electromigration, IR Drop and Design For Manufacturing robustness, • Coordination of a Split-Fab Design and Development between WD (for Memory Array Layers) and a CMOS Foundry (for Operational Circuitry), • Developing and Harmonizing CMOS Foundry wafer requirements to allow for continued processing of Memory Array layers in WD’s Fabrication Line, • Development of EDA Tool Design Rules for WD’s Memory Array Layers, • Defining and executing the split-fab tape out flowQualifications Minimum of a Bachelor's, Master's or PhD degree in Electrical Engineering, Physics, or closely related field. The prior track record of a viable candidate must show: • Previous design layout, tape out and validation of high density memory chip designs, • Capability to develop design layout schedules that meet chip functional requirements and timelines, • Proficiency in Cadence Virtuoso (VXL), Mentor Graphics Calibre, or Synopsys IC Validator, • Capability to work closely with circuit designers to iterate on schematics and with process engineers to understand fabrication constraints, • Experience developing memory cell models for inclusion in simulation tool environment, such as Verilog-A, • Experience with emerging memories such as MRAM, ReRAM, or PCM, • Experience developing Radiation Tolerant Layouts, • Track record of publications and patents related to memory design layout Additional Information WD is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person’s gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person’s assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal” poster. Our pay transparency policy is available here. WD thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. WD is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. Based on our experience, we anticipate that the application deadline will be 6/30/26, although we reserve the right to close the application process sooner if we hire an applicant for this position before the application deadline. If we are not able to hire someone from this role before the application deadline, we will update this posting with a new anticipated application deadline. #LI-BN1 Compensation & Benefits Details • An employee’s pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs., • The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future., • If your position is non-exempt, you are eligible for overtime pay pursuant to company policy and applicable laws. You may also be eligible for shift differential pay, depending on the shift to which you are assigned. You will be eligible to be considered for bonuses under either WD’s Short Term Incentive Plan (“STI Plan”) or the Sales Incentive Plan (“SIP”) which provides incentive awards based on Company and individual performance, depending on your role and your performance. You may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to WD's Standard Terms and Conditions for Restricted Stock Unit Awards. • We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program; employee stock purchase plan; and the WD Savings 401(k) Plan.

Job DescriptionCompany Description Arista Networks is an industry leader in data-driven, client-to-cloud networking for large data center, campus and routing environments. What sets us apart is our relentless pursuit of innovation. We leverage the latest advancements in cloud computing, artificial intelligence, and software-defined networking to provide our clients with a competitive edge in an increasingly interconnected world. Our solutions are designed to not only meet the current demands of the digital landscape but to also anticipate and adapt to future challenges. At Arista we value the diversity of thought and perspectives that each employee brings to the table. We believe that fostering an inclusive environment, where individuals from various backgrounds and experiences feel welcome, is essential for driving creativity and innovation. Our commitment to excellence has earned us several prestigious awards, such as Best Engineering Team, Best Company for Diversity, Compensation, and Work-Life Balance. At Arista, we take pride in our track record of success and strive to maintain the highest standards of quality and performance in everything we do. Job Description Who You’ll Work With Arista seeks to add a Senior Thermal Engineer to address thermal engineering design challenges of high-end switching products in Santa Clara, California. This position reports to the Mechanical Engineering Manager. What You’ll Do In this role, you will work closely with the Electrical design and hardware validation teams to ensure fulfillment of overall system requirements. As the Senior Thermal Engineer you will be responsible for addressing all thermal design related issues on different projects and shape thermal strategy for future products. • Develop thermal cooling strategies for next-generation, high-performance switching products., • Work independently to perform complete thermal analysis and design using Icepak., • Support thermal analysis requests from hardware team, product management team and other cross functional teams with either spreadsheet calculations or detailed simulation results., • Capable of conducting different engineering experimental tests to verify design (e.g., components, system level, etc.) and correlate with computational results.Qualifications, • MS Degree in Mechanical Engineering - Ph.D. preferred., • Minimum of 5 years of direct professional experience in thermal design and analysis of electronic appliances using Icepak, FloTHERM, SmartCFD, etc., • Experience with high power (>800W) SoC liquid cooling thermal models and system-level analysis., • Experience in cold plate liquid cooling design and analysis, open loop or closed loop liquid cooling, CDU at rack level or facility level design and analysis., • Experience in numerical modeling based on Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) (convergence, discretization, meshing)., • Knowledge and familiarity with electronic cooling and challenges of systems within data center environments., • Knowledge of heat transfer modes; conduction, convection (passive and active), and radiation., • Thorough understanding of heat sink type/design, heat pipes, vapor chambers, fans, blowers, pumps, thermal interface material. Experience in vendor selection., • Flow and thermal measurement techniques, mechanical (thermal and structural) validation and qualification tests including, Environmental Test (ETE), etc., • Knowledge of thermal airflow testing, fans, pumps, liquid loop cold plate testing, and augmentation to system thermal simulation models., • Experience using ProEngineer (PTC Creo) a plus. The new hire base pay for this role has a salary range of $130,000 to $200,000. Arista offers different pay ranges based on work location, so that we can offer consistent and competitive pay appropriate to the market. The actual base pay offered will be based on a wide range of factors, including skills, qualifications, relevant experience, and work location. The pay range provided reflects base pay only and in addition certain roles may also be eligible for discretionary Arista bonuses and equity. Employees in Sales roles are eligible to participate in Arista’s Sales Incentive Plan, which pays commissions calculated as a percentage of eligible sales. US-based employees are also entitled to benefits including medical, dental, vision, wellbeing, tax savings and income protection. The recruiting team can share more details during the hiring process specific to the role and location. #LI-FI1 Additional Information Arista Networks is an equal opportunity employer. Arista makes all hiring and employment-related decisions in a non-discriminatory manner without regard to race, color, religion, sex, sexual orientation, gender identity, national origin or any other factor determined to be unlawful under applicable federal, state, or law law. All your information will be kept confidential according to EEO guidelines.

Job Description Please note relocation is required for this role to: Odessa, TX Lead CT Tech Full-Time Position Day Shift, Monday - Friday, 7:00am - 3:30pm Job Summary: • Obtains patient history, explains standard procedures, and addresses patient concerns, • Produces computerized tomographic scanner radiographs of specific areas as required by the departmental procedures, • Performs ultrasound examinations, abdominal scans, retroperitoneal scans, and radiation therapy localization, • Relies on experience and judgment to plan and accomplish goals, • Performs a variety of tasks, • Works under general supervision, • Certain degree of creativity and latitude is required, • Associates degree and completion of radiologic technology training, • A.R.R.T. registration required, • 3+ years of experience, • Competitive salary and benefits package, • Opportunities for professional development and advancement, • Supportive work environment with a collaborative team, • Comprehensive healthcare coverage, • Retirement savings plan, • Paid time off and flexible scheduling options Odessa Regional Medical Center was founded in 1975 as Odessa Women’s and Children’s Hospital. Through the years, the hospital grew and evolved into a full-service healthcare facility and the name was changed to Odessa Regional Medical Center to reflect its larger campus and more comprehensive services. The hospital has 225 beds and has approximately 250 physicians on staff and has over 700 employees. Today, ORMC offers a wide spectrum of healthcare services, including advanced diagnostic imaging technology, emergency care, innovative surgical procedures, maternity care, comprehensive cardiac services and general medical care. #ZR #EXP

Job DescriptionJoin the fastest growing outpatient radiology practice in the Nation- SimonMed Imaging! Our commitment to excellence and improving patient care paired with the best in class technology allows us to be an industry leader in the constantly evolving health care environment. Secure your spot now and take advantage of a unique career opportunity to advance your skills while working alongside a dedicated team of board-certified subspecialty radiologists. We can’t wait to meet you!Essential Functions • Performs CT procedures at a technical level not requiring constant supervision of technical detail., • Obtains patient history, explains standard procedures and addresses patient concerns., • Produces computerized tomographic scanner radiographs of specific areas as required by the departmental procedures., • Performs those duties directly involved with a variety of technical procedures applying ionizing radiation for the purpose of detecting pathology., • Regulates the equipment used to expose the x-ray film, develops and documents PACS imaging., • Operates equipment safely and maintains SimonMed standards while performing call types of procedures., • Establishes and maintains a good rapport and professional relationship with fellow employees, other departments, and facility staff., • Familiar with standard concepts, practices and procedures., • Relies on experience and judgment to plan and accomplish goals., • Works under general supervision., • Duties as assignedOther Duties, • Please note this job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice.Benefits, • Your health, happiness and future matters! At SimonMed Imaging, we offer medical, vision and dental insurance, 401(k) eligibility, paid holidays plus PTO, Sick Time, opportunity for growth, and much more!Minimum Qualifications, • Requires registration as a Certified Radiologic and Computerized Tomography Technologist by the State, • Requires registration as an RT and CT Technologist by the A.R.R.T., • SimonMed Imaging requires valid hands on CPR certificationPhysical Demands, • This position may require duties including lifting and carrying up to 40 pounds, sitting for prolonged periods of time, with frequent standing and walking.Dress Attire

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The Comms Avionics Lead Engineer will lead the development and test of RF hardware for E-Space satellite communications equipment. The ideal candidate has 15+ years of experience in RF electrical design including 5+ years in RF communications system design. This position will report to the Director of Electrical Engineering and will work closely with various engineering teams. The successful candidate will be based in our Saratoga, CA office. What you’ll be doing: • Own the satellite Comms subsystem electronics implementation from requirements to flight spanning RF, mixed signal electronics, and firmware interface domains., • Develop Comms electronics subsystem requirements, block diagrams, analyses, and flow down requirements to unit levels in collaboration with other engineering disciplines., • Guide the implementation of Comms unit level electronics, antennas, and interconnect according to subsystem and satellite requirements and con-ops., • Lead the Comms subsystem hardware integration testing and qualification., • Perform system level trade studies, simulations, and analyses for signal characterization, performance metrics, SWaP, etc., • Lead design reviews for multi-disciplinary audiences., • Support flight operations and end-to-end OTA comms testing. What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent., • 5+ years in RF over-the-air Comms system design including link budget engineering., • 15+ years of experience in RF electrical circuit design, analysis, simulation, PCB implementation and testing., • Proficiency with antenna design., • Design proficiency with LNAs, PAs, filtering, mixers, signal modulation, etc., • Proficiency with schematic capture and PCB layout., • Proficiency performing circuit and signal analysis in HFSS, ADS, and SPICE, • Proficiency with digital processing systems including FPGAs, SoCs, memory, and high-speed comms interfaces., • Proficiency with electronic lab equipment such as VNAs, spectrum analyzers, oscilloscopes, power supplies, soldering iron, etc., • Demonstrated success working in a dynamic environment. Bonus points for the following:, • Master’s degree in electrical engineering, Computer Engineering, or equivalent., • Experience designing for space environments including radiation impacts and mitigation., • Familiarity with Altium Designer, • FPGA design skills. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job Description Overview Are you ready to take your career to new heights? At Concentra, you will be a vital member of our patient care team and play a crucial role in providing exceptional care to our patients. Our mission is to improve the health of America's workforce, one patient at a time. Join us at Concentra and see how your clinical competency and compassion can make a meaningful difference in the lives of the patients you serve. The X Ray Limited Scope & Medical Support Specialist performs routine x-ray, medical, and testing procedures under direct supervision of the treating clinician as well as supports in other areas of the facility as needed including registration and referral management. This position will also perform routine X-ray examinations in accordance with Concentra policies, practices, and procedures and applicable regulations. This role requires efficient and accurate delivery of one-on-one patient care while thriving in a fast-paced environment. Also will ensure that every patient is treated with quality clinical care and receives an excellent patient experience from welcoming, respectful, and skillful colleagues. Responsibilities X-ray Technician Duties • Prepare patients for radiologic procedures. Escort patients to dressing and x-ray rooms, provide verbal and/or written instructions and assist patients in positioning body parts to be radiographed. Explain procedures and observe patients to ensure patient care, safety and comfort during the x-ray exam, • Operate radiologic equipment to produce images of the body for diagnostic purposes. Position radiologic equipment and adjust controls to set exposure time and distance according to specification of examination. Take x-rays following established radiologic requirements and regulations to ensure patient care and safety, • Use radiation safety measures and protection devices to ensure safety of patients and team members, • Ensure radiologic equipment remains in working order. Report equipment malfunctions to Center Operations Director, • Perform Department of Transportation (DOT) and Non-DOT drug and alcohol testing, • Prepare patients for physical examinations, including taking vital signs and any required or requested ancillary testing including but not limited to vaccines and injections, phlebotomy, PFTs, audiogram testing and respirator fit testing, • Perform rapid screening tests (influenza, strep, mono, glucose, etc.), • Assist providers during examination and treatment, • Responsible for performing routine medical procedures as ordered by treating clinician as well as triaging emergent patients as needed, • Prepare and assist clinician with procedure set up and injury care, • Apply bandages, dressings and splints as ordered by the treating clinician, • Dispense medications and DME as ordered by the treating clinician in accordance with state regulations, • Complete quality assurance activities on equipment and medical devices as well as testing processes used in the center, • Maintain supplies, clean rooms and equipment, and stock exam rooms, • Maintain and operate all medical devices and equipment, including calibration and record keeping in accordance with current policy and procedures, • Notify supervisor immediately if equipment is not functioning properly, supplies are needed, or facility is not operating as expected, • In partnership with center leadership, assist with patient flow and volume, • Keep patients informed of expected wait times during all aspects of the center visit, • Responsible for clerical tasks in both the front and back office associated with patient care and proper record keeping, • Ensure accuracy in documentation, • Perform front office duties: greet patients, obtain authorization, check in/out, communicate wait times, answer multi-line telephone system, and distribute employer results/paperwork as needed, • Follow HIPAA guidelines and safety rules, • Attend center staff meetings or huddles as required, • Assist in maintaining a neat, clean, and orderly appearance throughout the facility Qualifications • High school graduate or GED equivalent, • Certifications and/or Licenses:, • Completion of state approved Limited Scope Technician certificate program and license by the state in which employed, if applicable., • Customarily has at least six months or more of medical assistant experience with knowledge of medical procedures and medical terminology, • Customarily has at least six months of demonstrated experience in X-Ray and familiarity with routine medical procedures, • Concentra Core Competencies of Service Mentality, Attention to Detail, Sense of Urgency, Initiative and Flexibility, • Ability to make decisions or solve problems by using logic to identify key facts, explore alternatives, and propose quality solutions, • Outstanding customer service skills as well as the ability to deal with people in a manner which shows tact and professionalism, • The ability to properly handle sensitive and confidential information (including HIPAA and PHI) in accordance with federal and state laws and company policies, • Able to communicate both verbally and in writing in a clear, and professional manner, • Teamwork focus with peers and center leadership team; ability to maintain working relationship with all levels of colleagues, • Must participate in initial and ongoing training as required, • Obtain all certifications required of Medical Support Specialists including but not limited to Drug Screen Collection, Breath Alcohol Certification, Hair and Oral Fluids Collection, • Intermediate knowledge of Microsoft Office such as Word, Excel, Outlook and entry of data into various systems/applications

Job DescriptionJoin the fastest growing outpatient radiology practice in the Nation- SimonMed Imaging! Our commitment to excellence and improving patient care paired with the best in class technology allows us to be an industry leader in the constantly evolving health care environment. Secure your spot now and take advantage of a unique career opportunity to advance your skills while working alongside a dedicated team of board-certified subspecialty radiologists. We can’t wait to meet you! As a Nuclear Medicine PET/CT Technologist at SimonMed, you will be performing diagnostic Nuclear Medicine, CT, and PET/CT exams. You will be trained on the latest PET/CT procedures including but not limited to; Axumin, NETSPOT, Amyloid and Oncology Imaging. You will also be trained on the latest CT technology, including Dual Energy and iterative reconstruction. SimonMed is committed to becoming the Nation’s leading provider for low dose CT. You will gain experience in a variety of specialized exams including but not limited to; Coronary CTAs, Dual Energy Metal Suppression, and Kidney stone quantification.Essential Functions • Establishes and maintains a good rapport and professional relationship with fellow employees, other departments, and facility staff., • Works under general supervision., • Obtains patient history, explains standard procedures, and addresses patient concerns., • Performs a variety of PET/CT procedures by following and verifying referring provider’s orders to provide images, data analysis and patient information for diagnostic interpretation or therapeutic procedures., • Performs Nuclear Medicine and/or PET/CT with a variety of technical procedures applying ionizing radiation for the purpose of detecting pathology., • Performs procedures at a technical level not requiring constant supervision of technical detail., • Produces computerized tomographic scanner radiographs of specific areas as required by the departmental procedures., • Processes data and enhancing digital images using advanced computer technology., • Performs Nuclear Medicine and/or PET/CT procedures at a technical level not requiring constant supervision of technical detail., • Performs those duties directly involved with a variety of technical procedures applying ionizing radiation for the purpose of detecting pathology., • Regulates the equipment used to expose the x-ray film, develops and documents PACS imaging., • Operates equipment safely and maintains SimonMed standards while performing all types of procedures., • Evaluates images to determine the technical quality and calibration of instrumentation., • Provides diagnostic aid to physicians by conducting organ or body scans on patients., • Administers radiopharmaceuticals and medications for patient imaging and therapeutic procedures, • Administers and records isotope dosage in accordance to established departmental protocol., • Observes patient during procedure and reports any abnormal activity., • Familiar with standard concepts, practices and procedures., • Relies on experience and judgment to plan and accomplish goals., • Demonstrates competency in the performance of job related skills appropriate to his/her customer populations and departmental services while providing excellent customer service., • Utilizes and operates equipment and mechanical devices which provide for a functional, effective, and safe environment., • Adheres to policies, procedures, guidelines relative to departmental operations. Other Duties, • Please note this job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice.Benefits, • Your health, happiness and future matters! At SimonMed Imaging, we offer medical, vision and dental insurance, 401(k) eligibility, paid holidays plus PTO, Sick Time, opportunity for growth, and much more!Education, • High School Diploma, • Requires completion of a formal Radiologic Technology training program in AMA approved school., • Bachelor’s degree in a related field (Preferred)License/Certification, • BLS Certification or “Hands–On” CPR certification, • Requires registration as a Certified Technologist Nuclear Medicine by the State, • Requires registration as a Certified Radiologic Technologist by the State, • Requires NMTCB and/or A.R.R.T.(N) certification, • Requires registration as an RT and CT Technologist by the A.R.R.T., • SimonMed Imaging requires valid CPR certificationExperience, • 2 years of experience in radiologyPhysical Demands, • This position may require duties including lifting and carrying up to 40 pounds, sitting for prolonged periods of time, with frequent standing and walking. May be exposed to biohazards and chemicals as outlined in the MSDS Manual; and other hazards/unpleasant working conditions.Dress Attire

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The Staff Battery Electrical Engineer will participate in all aspects of the development and test of avionics hardware for E-Space satellites. The ideal candidate has 10+ years of experience in power and battery electronics design including schematic capture, PCB layout, and testing. This position will report to the Director of Electrical Engineering and will work closely with the Electrical, Software, and Systems Engineering teams. The successful candidate will be based in our Saratoga, CA office. What you’ll be doing: • Own the development of a spacecraft battery management system electronics from clean sheet to flight., • Develop and implement PCBA and battery pack requirements, use-cases, and system integration., • Schematic capture and PCB layout of battery circuits using Altium Designer., • Circuit analysis including power related, SWaP, tolerance, and reliability related., • Collaborate on electro-mechanical design, test, qualification, and manufacturing of battery packs incorporating this BMS., • BMS electronicsdesign verification testing, qualification and acceptance testing, and system integration support., • Lead design reviews for inter-disciplinary audiences., • Manufacturing and flight support as needed. What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent., • 10+ years of experience in power electronics design including schematic capture, PCB layout, and testing., • 3+ years of experience in battery pack electrical design., • Expertise in battery management circuitssuch asfault protection, cell balancing,thermal management, power transmission, power supplies, and precision analog instrumentation., • Awareness of battery pack manufacturing techniques including cell characterization and welding., • Skilled at schematic capture and layout of complex PCBs., • Skilled at performing circuit analyses in SPICE and Excel., • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering iron, etc., • Demonstrated success working in a dynamic environment. Bonus points for the following:, • Master’s degree in Electrical Engineering, Computer Engineering, or equivalent., • Experience designing for space environments including radiation impacts and mitigation., • Proficiency with Altium Designer., • Successful implementation or sustainment of automated battery manufacturing and test systems., • Experience designing rigid-flex PCBs and general electro-mechanical design familiarity., • FPGA coding experience • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. Why this role is important The Staff Satellite Electrical Engineer for Digital Circuits will participate in all aspects of the development andtest of avionics digital processing hardware for E-Space satellites. The ideal candidate has 15+ years ofexperience in electrical hardware design including schematic capture, PCB layout, and testing. This position will report to the Director of Electrical Engineering and will work closely with the Electrical,Software, and Systems Engineering teams. The successful candidate will be based in our Saratoga, CA office.What you’ll be doing: • Own digital PCBA development from blank sheet to flight., • Develop PCBA requirements, architectures, and con-ops in collaboration with other engineering disciplines., • Schematic capture and PCB layout of complex high speed digital processing PCBAs using Altium Designer., • Circuit analysis and simulations including signal integrity, timing, SWaP, tolerance, and reliability., • PCBA design verification testing and system integration testing., • Manufacturing and flight support as needed.What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent., • 15+ years of experience in digital or mixed signal electronics design including schematic capture, PCB layout, and testing., • Design proficiency with processors, FPGAs, SoCs, memory, high speed data interfaces, switch mode power supplies, clocking, etc., • Skilled at schematic capture and layout of complex HDI PCBs., • Skilled at performing circuit simulations and analysis for signal integrity, timing, size/mass, power, etc. Preferred tools include HyperLynx, Spice, silicon vendor supplied planning tools (ex Vivado)., • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering iron, etc., • Demonstrated success working in a dynamic environment.Bonus points for the following:, • Master’s degree in Electrical Engineering, Computer Engineering, or equivalent., • Experience designing for space environments including radiation impacts and mitigation., • Familiarity with Altium Designer, • RF and transmission line design and simulation skills., • Experience designing rigid-flex PCBs and general electro-mechanical design familiarity. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking experienced Digital Design Engineers to join our Satellite Avionics team. In this role you will own the electrical design of complex digital boards for a next-generation satellite constellation, including high-speed interfaces, FPGA integration, and mixed-signal subsystems. You will play a central role in delivering flight-qualified avionics hardware from concept through qualification. Key Responsibilities: • Own schematic design and component selection for digital avionics boards, from concept through flight qualification., • Design high-speed SERDES interfaces (PCIe, JESD, gigabit links) and DDR4/DDR5 memory interfaces with proper timing closure., • Develop clocking architectures including PLL configuration, jitter management, and clock distribution networks., • Perform power budgeting and system-level power allocation across board subsystems., • Apply radiation-tolerant design techniques including SEU/SEE mitigation, TID considerations, and appropriate component derating., • Collaborate with FPGA engineers on support circuitry design, pinout planning, and power/layout requirements., • Drive board bring-up activities including configuration, interface verification, and structured debugging., • Participate in design reviews and cross-functional integration with RF, power, thermal, and mechanical teams.Required Qualifications:, • Own schematic design and component selection for digital avionics boards, from concept through flight qualification., • Design high-speed SERDES interfaces (PCIe, JESD, gigabit links) and DDR4/DDR5 memory interfaces with proper timing closure., • Develop clocking architectures including PLL configuration, jitter management, and clock distribution networks., • Perform power budgeting and system-level power allocation across board subsystems., • Apply radiation-tolerant design techniques including SEU/SEE mitigation, TID considerations, and appropriate component derating., • Collaborate with FPGA engineers on support circuitry design, pinout planning, and power/layout requirements., • Drive board bring-up activities including configuration, interface verification, and structured debugging., • Participate in design reviews and cross-functional integration with RF, power, thermal, and mechanical teams.Preferred Qualifications:, • Experience with satellite or spacecraft avionics design and qualification (EM/QM/FM build cycles)., • Background in non-volatile memory technologies (Flash, MRAM, FRAM) and in-system programmability., • Exposure to power supply design and power integrity analysis for digital boards., • Experience with design for radiation reliability and single-event effects mitigation at the board level., • Familiarity with signal integrity simulation tools (HyperLynx SI/PI, Ansys, ADS).Tools & Technologies:, • Altium Designer (schematic capture and layout review), • HyperLynx SI, SI/PI, and Full-Wave (signal and power integrity), • SPICE-based circuit simulation • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking a Board Thermal Simulation Engineer to perform component-level and board-level thermal analysis for all avionics boards in our satellite constellation program. You will model thermal behavior, evaluate cooling strategies, and ensure every board meets its temperature requirements across all operational modes and orbital environments. Key Responsibilities: • Perform component-level thermal analysis including junction temperature calculation, hot-spot identification, and heat-path evaluation., • Develop thermal models using analytical methods and simulation tools for steady-state and transient conditions., • Evaluate and recommend cooling strategies (conduction, convection, radiation, heat spreading) for avionics boards., • Assess temperature effects on component aging, reliability, and derating requirements., • Analyze thermomechanical degradation risks including CTE mismatch, solder fatigue, and connector stress., • Perform system-level thermal budgeting and define thermal interface requirements across subsystems., • Evaluate environmental thermal loads from orbit-induced temperature swings and operational heat dissipation., • Select materials based on thermal conductivity, expansion properties, and long-term reliability., • Validate thermal models with empirical measurements and test data from EM and QM builds., • Collaborate with electrical, mechanical, and reliability engineers for integrated thermal solutions., • Document thermal requirements, design guidelines, and analysis results.Required Qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related field., • 3+ years of experience in thermal analysis for electronics, preferably in aerospace or space applications., • Proficiency with thermal simulation tools (Ansys IcePak, FloTHERM, or equivalent)., • Strong understanding of heat transfer fundamentals (conduction, convection, radiation)., • Experience with component derating for thermal environments., • Ability to create and validate thermal models against test data.Preferred Qualifications:, • Experience with satellite or spacecraft thermal analysis and orbital thermal environments., • Background in thermal cycling test planning and correlation of simulation to test results., • Familiarity with Ansys IcePak specifically., • Experience with system-level thermal budgets and interface management., • Knowledge of PCB material properties and their thermal behavior., • Understanding of reliability implications of thermal stress on electronics.Tools & Technologies:, • Ansys IcePak (or equivalent thermal simulation tool), • MATLAB or Python for analytical modeling • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job Description Job Description: Sr. Electrical DC-DC Design Engineer Location: San Jose HiRel Department: Engineering Reports To: Design Engineering Manager Summary: The Sr. Electrical Design Engineer for high reliability DC-DC converters for Space and Military applications supports the development of new DC-DC converters. The Engineer is responsible for the design documentation, analyses and qualification of new DC-DC converters that will have a direct impact on meeting our product road map objectives. Essential Duties & Responsibilities: • Architect and design isolated and non-isolated DC-DC converters and support production in new product DC-DC Converter development activites., • Responsible for the release of new design packages (documentation), • Perform worst-case circuit analysis (WCCA), derating analysis, and stress analysis for high-reliability applications., • Develop simulation models (LTspice or equivalent)., • Develop power stage magnetics (transformers, inductors) including core selection, winding design, thermal analysis, and leakage control., • Conduct detailed loss modeling, efficiency optimization, and thermal design., • Design for radiation tolerance and total ionizing dose (TID) considerations where applicable., • Generate detailed schematics and guide PCB layout for low noise, high efficiency, and high reliability., • Review customer specifications and internal datasheets., • Present designs at PDR, CDR, and other formal design reviews., • Mentor junior engineers and contribute to engineering best practices., • Perform test validation, qualification, and product release to production per corporate standards and procedures., • Support the test and product engineering teams to help solve problems, • Comply with all safety policies, practices, and procedures., • Build meaningful and productive relationships with internal business partners., • Participate in proactive team efforts to achieve departmental and company goals., • Contribute to building a positive team spirit., • Communicate effectively with all levels of employees., • Protect confidential information by not communicating, disclosing to, or using it for the benefit of 3rd parties., • Maintain the highest degree of honesty and integrity at all times., • Perform other duties as assigned. Page Break Job Qualifications: • Electrical Engineering with minimum 5 years converter design experience, • Knowledge of electronic engineering principles including analog circuits, power supplies, and isolated DC-DC converter design., • Experience with schematics and PCB design., • Hands-on experience performing bench electrical measurements using signal generators, DVMs, oscilloscopes, and spectrum analyzers., • Excellent analytical and problem-solving skills, as well as teamwork capabilities., • Excellent communication skills and ability to interact with multiple stakeholders. Job Skills: • Perform root cause analysis and corrective actions for design or field issues., • Standard electronic laboratory equipment: (i.e., Oscilloscopes, Pulse/Signal Generators, Parametric Analyzers, Spectrum Analyzers, etc)., • Interface with customers and program managers on technical requirements and reviews., • Self-motivated with the ability to align priorities in accordance with business goals and meet deadlines in a fast-paced environment., • Team player who can work with different multiple team members, • High-energy, results-focused self-starter., • Strong analytical ability and decision-making., • Ability to adapt quickly and learn new tasks independently., • Ability to manage competing priorities., • Excellent organization and planning skills., • Effective communication skills (written & verbal). * IMPORTANT INFORMATION: This position is in an ITAR-registered facility, US Person (US Citizen or US Permanent resident) status is a must. * At Micross, our Core Values of integrity, communication, teamwork, quality and execution, self-discipline and accountability are cultivated throughout all levels of the organization. Micross provides a challenging and enjoyable workplace for members and supports the needs of the community. Micross provides competitive benefits including medical, HSA and FSA plans, dental, vision, company paid basic Life Insurance, Employee Assistance Program (EAP), 401k with employer match, paid leave, vacation, holidays, generous tuition assistance, 529 College Savings, Pet insurance, Legal insurance, and a range of well-being programs available.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are looking for FPGA Design Engineers to develop, implement, and verify FPGA firmware for satellite avionics systems. You will work across multiple boards and subsystems, designing RTL for flight computers, payload processing, communications, and sensor interfaces. The role requires strong digital design fundamentals and the ability to deliver reliable, radiation-tolerant FPGA designs for a space environment. Key Responsibilities: • Design and implement RTL in SystemVerilog or VHDL for satellite avionics FPGAs across a variety of FPGA platforms., • Develop AXI Memory-Mapped and AXI-Stream protocol implementations for inter-subsystem communication., • Perform FPGA resource and size estimation including logic, memory, and DSP budgeting., • Implement clock-domain-crossing (CDC) design techniques and verify timing closure across designs., • Design clock/reset tree architectures and manage timing-closure strategies for complex multi-clock designs., • Develop SPI, I²C, GPIO, and other low-speed peripheral interfaces alongside high-speed transceiver links., • Apply fault-tolerant digital design techniques including TMR, ECC, scrubbing, and SEE mitigation., • Perform synthesis and place-and-route using vendor toolchains, including custom placement constraints., • Support board bring-up by developing configuration, interface verification, and debug test sequences., • Collaborate with digital design, power, and PCB layout engineers to ensure FPGA support circuitry meets requirements.Required Qualifications:, • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or related field., • 5+ years of FPGA design experience in aerospace, defense, or high-reliability systems., • Proficiency in SystemVerilog and/or VHDL for RTL design., • Experience with FPGA synthesis, place-and-route, and timing closure workflows., • Demonstrated knowledge of AXI or similar bus protocols and interface design., • Experience with clock-domain crossing techniques, FIFO design, and multi-clock architectures., • Understanding of radiation effects on FPGAs and mitigation strategies (TMR, ECC, scrubbing).Preferred Qualifications:, • Experience with a variety of FPGA platforms and vendor toolchains (e.g., flash-based, SRAM-based, anti-fuse architectures)., • Background in signal processing (FFT, FIR/IIR filters) and DSP integration., • Experience with transceiver design and high-speed serial communications on FPGAs., • Exposure to DAC/ADC interfaces and mixed-signal digital handling., • Experience with satellite or spacecraft FPGA applications., • Proficiency in Python or TCL scripting for automation and build infrastructure.Tools & Technologies:, • FPGA vendor toolchains (synthesis, place-and-route, timing analysis), • RTL simulation tools (e.g., VCS, QuestaSim, or equivalent), • Python, TCL, or shell scripting for build automation • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionCompany Description At WD, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, WD is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that—our technology helped people put a man on the moon and capture the first-ever picture of a black hole. We offer an expansive portfolio of technologies, HDDs, and platforms for business, creative professionals, and consumers alike under our Western Digital®, WD®, and WD_BLACK™. We are a key partner to some of the largest and highest-growth organizations in the world. From enabling systems to make cities safer and more connected, to powering the data centers behind many of the world’s biggest companies and hyperscale cloud providers, to meeting the massive and ever-growing data storage needs of the AI era, WD is fueling a brighter, smarter future. Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage. Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: The job opening is for a full-time Research Staff Member in the device physics and electrical testing group in Western Digital's research department. The role will be a part of a multi-functional team whose aim is to develop and eventually commercialize Western Digital's strategic radiation hardened memory technology. The responsibilities for the role will include • Bringing up CMOS electrical test equipment & test code, • Designing electrical test procedures and analyzing test data, • Generating reports and presenting analysis to team, • Working with CMOS design, array architecture, materials, and process teams to drive next steps to improve the technology, • Generating intellectual property, publishing papers, and presenting at conferencesQualifications REQUIRED: • Extensive coding experience in Python for instrumentation and data analysis, • Ability to design and optimize electrical test procedures for assessing key performance metrics, • Strong scientific collaboration and communication skills, • Strong hands-on electrical device measurement skills, • Good working knowledge of semiconductor or magnetic device physics The following skills and experiences are highly desired • Experience with PXIe-based test equipment, • Experience with memory test equipment, such as Advantest or Teradyne, • Experience with emerging memories such as MRAM, ReRAM, or PCM, • Track record of publications and patents Additional Information WD is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person’s gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person’s assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal” poster. Our pay transparency policy is available here. WD thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. WD is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. Based on our experience, we anticipate that the application deadline will be 04-03-2026 (3 months from posting), although we reserve the right to close the application process sooner if we hire an applicant for this position before the application deadline. If we are not able to hire someone from this role before the application deadline, we will update. #LI-RR1 Compensation & Benefits Details • An employee’s pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs., • The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future., • If your position is non-exempt, you are eligible for overtime pay pursuant to company policy and applicable laws. You may also be eligible for shift differential pay, depending on the shift to which you are assigned. You will be eligible to be considered for bonuses under either WD’s Short Term Incentive Plan (“STI Plan”) or the Sales Incentive Plan (“SIP”) which provides incentive awards based on Company and individual performance, depending on your role and your performance. You may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to WD's Standard Terms and Conditions for Restricted Stock Unit Awards. • We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program; employee stock purchase plan; and the WD Savings 401(k) Plan.

Job Description COC Consulting is looking for a part-time phlebotomist in San Jose, CA. The Phlebotomist ensures the proper collection, processing, labeling, storage, and mailing of blood and urine samples to the laboratory for testing. • Collects patient blood and/or urine specimens using established procedures, • Properly prepares collected specimens for testing and analysis, ensuring specimen integrity, • Verifies urine and blood test requisitions, • Identifies the patient before any specimen is obtained, • Labels and documents specimens to prepare for shipment, • Maintains daily tallies of collections performed, • Tracks and requests laboratory and office supplies needed to fulfill duties, • Provides site specific procedural training to new employees, • Maintains a safe, secure, and healthy work environment by following standards and procedures; complying with legal regulations; follow Universal Precautions and OSHA standards when handling specimens., • Strictly adheres to HIPAA regulations, • Travels to additional sites when needed, • High School Diploma, GED, or equivalent, • Phlebotomy certification from an accredited agency, • Computer and technology proficient, • Valid driver’s license and car insurance, • Reliable transportation, • Ability to pass a background check, • A proven ability to handle ambiguity in the absence of defined systems and processes, • Frequently required to lift, carry, push, and pull up to 20 pounds, • Frequently required to speak and hear, • Frequently required to sit or stand for periods of time and bend, stretch, and stoop, • Frequently required to use all types of vision, such as close vision and computer vision, • Frequently required to use hand dexterity for use of standard office and clinical equipment, • Varying schedule to include evenings, holidays, and/or extended hours as Company dictates, • Occasional exposure to various temperatures, • Competitive salary, • Paid sick time, • Autonomous work

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The Staff Avionics RF Electrical Engineer will participate in all aspects of the development and test of RF hardware forE-Space satellite communications equipment. The ideal candidate has 10+ years of experience in RF electrical design including schematic capture, PCB layout, and testing. This position will report to the Director of Electrical Engineering and will work closely with variousengineering teams. The successful candidate will be based in our Saratoga, CA office.What you’ll be doing: • Own RF PCBA designs from clean sheet to flight., • Develop PCBA requirements, architectures, and con-ops in collaboration with other engineering disciplines., • Design of RF circuits including amplifiers, filters, high speed DACs/ADCs, path tuning, simulations, etc, • Schematic capture and PCB layout using Altium Designer., • Circuit analysis and simulations including RF signal characteristics, power, tolerance, and reliability related., • PCBA design verification testing, qualification testing, and system integration testing., • Lead design reviews for inter-disciplinary audiences., • Production manufacturing support as needed. What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent., • 10+ years of experience in RF electrical circuit design, analysis, simulation, schematic capture, PCB layout, and testing., • Design proficiency with LNAs, PAs, filtering, mixers, signal modulation, etc., • Proficiency with schematic capture and layout of complex PCBs., • Proficiency performing circuit simulation and analysis analyses in RF toolstools such as HFSS, ADS, SPICE, and Excel., • Proficiency with electronic lab equipment such as VNAs, spectrum analyzers, oscilloscopes, power supplies, soldering iron, etc., • Demonstrated success working in a dynamic environment. Bonus points for the following:, • Master’s degree in Electrical Engineering, Computer Engineering, or equivalent., • Experience with antenna design and wireless RF links., • Experience designing power, digital, and analog circuits., • Experience designing for space environments including radiation impacts and mitigation., • Familiarity with Altium Designer., • FPGA design skills. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The Staff Satellite Electrical Engineerfor Mixed Signal Circuits willparticipate in all aspects of the development and test of avionics hardware for E-Space satellites. The ideal candidate has 10+ years of experience in electrical hardware design including schematic capture, PCB layout, and testing. This position will report to the Director of Electrical Engineering and will work closely with the Electrical, Software, and Systems Engineering teams. The successful candidate will be based in our Saratoga, CA office. What you’ll be doing: • Own mixed signal PCBA development from clean sheet to flight., • Develop PCBA requirements, architectures, and con-ops in collaboration with other engineering disciplines., • Schematic capture and PCB layout of complex power, digital, and analog circuit PCBAs using Altium Designer., • Circuit analysis including power, signal integrity, SWaP, tolerance, and reliability related., • PCBA design verification testing, qualification testing, and system integration testing., • Lead design reviews for inter-disciplinary audiences., • Manufacturing and flight support as needed. What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent., • 10+ years of experience in power, digital, and analog electronics design including schematic capture, PCB layout, and testing., • Design proficiency with voltage regulators, FPGAs, SoCs, high speed data interfaces, precision analog instrumentation, clocking, etc., • Skilled at schematic capture and layout of complex PCBs., • Skilled at performing circuit simulations and analysis in spice, excel, and other tools for analog behavior, signal integrity, size/mass, power, etc., • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering iron, etc., • Demonstrated success working in a dynamic environment. Bonus points for the following:, • Master’s degree in Electrical Engineering, Computer Engineering, or equivalent., • Experience designing for space environments including radiation impacts and mitigation., • Familiarity with Altium Designer, • RF and transmission line design and simulation skills., • Experience designing rigid-flex PCBs and general electro-mechanical design familiarity., • FPGA design skills. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. Own the end-to-end design, development, and manufacturing transition of spacecraft harnesses, cables, connectors, and interconnect solutions for a LEO satellite constellation. You will drive connector selection from custom and COTS sources, develop cable assemblies spanning STP to coax to fiber, and work directly with international vendors to move designs from prototype through volume production. What you’ll be doing: CONNECTOR & INTERCONNECT DESIGN * Design and qualify custom and COTS connectors for spacecraft applications including shielded/unshielded low-pin-count, board-to-board, coax, high-speed, and fiber-optic interfaces. * Own connector selection trades across mass, volume, retention force, signal integrity, and space qualification requirements. * Develop overmolding tooling and processes for connector space qualification. * Coordinate with domestic and East Asian connector vendors on custom solutions, design reviews, and qualification activities. CABLE & HARNESS DESIGN * End-to-end ownership of cable and harness design: wire gauge selection, shielding architecture (STP, coax), routing, and drawing creation. * Drive cable manufacturing solutions from prototype through volume production. * Evaluate and specify specialty cables including ultra-lightweight coax and space-grade fiber optic assemblies. * Support harness manufacturing process development: stripping, termination (hotbar/wave solder), potting, and protection (sleeving, tape, fixation). ELECTRICAL INTERFACE & INTEGRATION * Develop and maintain the Electrical Interface Control Document (EICD) and from/to interconnect lists driving connector selection across the spacecraft bus. * Interface with systems, RF, power, and digital teams on signal routing, impedance requirements, and EMI/EMC considerations. * Work with internal engineering teams to optimize board placement and overall connectivity strategy. * Evaluate emerging interconnect technologies: laser-cut FPC, conductive adhesives, silver ink traces, and R2R-compatible solutions for antenna and thin-film applications. VENDOR & MANUFACTURING * Manage vendor relationships for connectors, cables, and interconnect components across domestic and East Asian suppliers. * Support manufacturing equipment sourcing and process development for cable stripping, termination, and assembly. * Partner with manufacturing teams to ensure high success rates in engineering-to-manufacturing transitions, including process validation, documentation, and first-article support. * Drive design-for-manufacturing optimization on interconnect solutions to hit cost and mass targets at constellation scale. What you bring to this role: * BS in Electrical Engineering, Mechanical Engineering, or related discipline. * 10+ years in interconnect, harness, or electro-mechanical design with at least 5 years on spacecraft or aerospace programs. * Hands-on experience with connector selection and qualification for space environments (thermal cycling, vibration, vacuum, outgassing). * Familiarity with IPC-620 (cable/harness), J-STD, and relevant NASA/ECSS/SAE workmanship standards. * Experience with CAD and harness design tools (SolidWorks, RapidHarness, Zuken, or equivalent). * Proficiency with lab equipment: multimeters, soldering, crimpers, TDR, hand tools. * Direct experience managing international component and cable vendors. Bonus points for the following: * MS in EE, ME, or related field. * Experience with high-speed interconnects (PCIe, LVDS) and signal integrity basics. * Coax cable design and RF connector experience. * Fiber optic interconnect experience (transceiver integration, cable assemblies). * Exposure to flex/rigid-flex PCB design and mechanical packaging. * Experience with Altium Designer for PCB-level connector integration. * Background in NPI and scaling from prototype to volume production in NewSpace or high-rate manufacturing. * Familiarity with LEO constellation environments and radiation considerations. This is a full time, exempt position, based out of our Saratoga office. The total compensation packaged will be determined by various factors such as your relevant job-related knowledge, skills, and experience. We are redefining how satellites are designed, manufactured and used—so we’re looking for candidates with passion, deep knowledge and direct experience on LEO satellite component development, design and in-orbit activities. If that’s your experience – then we’ll be immediately wow-ed. E-Space is not currently able to provide employment sponsorship for candidates who do not hold work authorization for the location of this role. Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That’s why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure, and actionable? Then you’ve come to the right place! At E-Space, we’re focused on bridging Earth and space with the world’s most sustainable low Earth orbit (LEO) satellite network. We’re a team of bold thinkers, ambitious leaders and dynamic doers—and we’re disrupting NewSpace by fundamentally changing the design of legacy LEO space systems to deliver entirely new satellite capabilities at a fraction of the cost. We’re intentional, we’re unapologetically curious and we’re 100% committed—to saving space, to protecting our planet and to turning connectivity into actionable intelligence.As Director or VP of Software Engineering, you will own the full software engineering organization for our space vehicle programs — from architecture and embedded systems to communications software and mission-critical delivery. This is a rare opportunity to build and lead a world-class engineering team at the forefront of commercial and government space. You will set technical vision, drive execution, and be a key voice in company strategy — partnering directly with the CEO, CTO, and program leadership to shape the next generation of space vehicles. The ideal candidate brings deep hands-on roots in embedded systems, Board Support Package (BSP) development, and communications software — combined with the leadership presence and organizational maturity to scale a high-performing engineering team.What you will be doing: Technical Leadership • Define and drive the software engineering vision, architecture, and roadmap across all space vehicle programs, • Provide hands-on technical leadership in embedded systems, BSP development (bootloaders, device drivers, RTOS bring-up), and communications software, • Oversee software design and implementation for spacecraft comms subsystems including SpaceWire, MIL-STD-1553, CCSDS, and RF data link protocols, • Own the software architecture for Command & Data Handling (C&DH) systems and mission-critical flight software, • Champion software quality, reliability, and compliance with applicable standards (DO-178B/C, NASA-STD-8739.8, or equivalent), • Drive hardware/software co-design and integration with electrical, systems, and mechanical engineering teams People & Organizational Leadership • Build, grow, and retain a high-performing software engineering organization across multiple disciplines and experience levels, • Hire, mentor, and develop engineering managers and senior/staff engineers into future technical leaders, • Foster a culture of engineering excellence, psychological safety, and continuous improvement, • Define career development frameworks, leveling guidelines, and performance standards for the software engineering team, • Partner cross-functionally with Program Management, Systems Engineering, and Operations to deliver on commitments Strategy & Execution • Own software program execution — schedules, milestones, risk identification, and mitigation across all active programs, • Represent software engineering in customer briefings, program reviews, and executive leadership meetings, • Contribute to business development and proposal efforts — defining software technical approaches and resource estimates for new pursuits, • Drive make/buy decisions, toolchain investments, and software development process improvements at scale, • Build and maintain technology partnerships with key vendors, tool suppliers, and industry partnersWhat you bring to this role:, • 12+ years of software engineering experience, with 5+ years in engineering leadership (managing managers or leading organizations of 15+ engineers), • Deep technical foundation in embedded systems and BSP development — bootloaders, device drivers, kernel bring-up, embedded Linux and/or RTOS (VxWorks, RTEMS, FreeRTOS), • Proven experience leading software development for space, defense, or other safety-critical platforms, • Strong background in communications software — protocol stacks, data link layers, or spacecraft comms subsystems, • Demonstrated ability to build and scale engineering teams in a fast-paced, mission-driven environment, • Track record of delivering complex, multi-million-dollar software programs on time and on budget, • Excellent executive communication skills — able to present to customers, boards, and government stakeholders, • Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science, or related fielExtra bonus points for the following:, • Active U.S. Security Clearance (Secret or above), • Experience with spacecraft C&DH (Command & Data Handling) and flight software development, • Knowledge of CCSDS protocols and space data system standards, • Familiarity with DO-178B/C software certification and safety-critical verification frameworks, • Experience supporting DoD, NASA, or other U.S. Government space programs, • Exposure to radiation-tolerant or radiation-hardened computing environments, • Experience leading software capture strategy for large government proposals ($50M+), • Master’s degree or PhD in a relevant engineering or computer science disciplineThe estimated range is meant to reflect an anticipated salary range for the position in question, which is based on market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, depth of relevant experience, and other relevant factors. For questions about this, please speak to the recruiter if you decide to apply for the role and are selected for an interview.This is a full time, exempt position, based out of our Saratoga office. The target base pay for this position is $100,000 - $185,000 annually. The total compensation packaged will be determined by various factors such as your relevant job-related knowledge, skills, and experience. We are redefining how satellites are designed, manufactured and used—so we’re looking for candidates with passion, deep knowledge and direct experience on LEO satellite component development, design and in-orbit activities. If that’s your experience – then we’ll be immediately wow-ed. E-Space is not currently able to provide employment sponsorship for candidates who do not hold work authorization for the location of this role.

Job Description Please note relocation is required for this role to: Odessa, TX Radiology Tech Full-Time Position Overnight Shift - Friday, Saturday, Sunday & Monday Flexible Scheduling = 4 x 10 hour shifts Job Summary: • Arranges patients for radiological examinations, • Produces radiographs (x-rays) to aid in the diagnosis of medical problems, • Prevents patient from being exposed to unnecessary radiation, • Relies on instructions and pre-established guidelines to perform the functions of the job, • Works under immediate supervision, • A certain degree of creativity and latitude is required, • Typically reports to a chief technologist or manager, • Associate's degree from an accredited program required; bachelor's degree preferred, • Registration as a technologist by the A.R.R.T. required, • Has knowledge of commonly used concepts, practices, and procedures within a particular field, • Competitive salary and benefits package, • Opportunities for professional development and advancement, • Supportive work environment with a collaborative team, • Comprehensive healthcare coverage, • Retirement savings plan, • Paid time off and flexible scheduling options Odessa Regional Medical Center was founded in 1975 as Odessa Women’s and Children’s Hospital. Through the years, the hospital grew and evolved into a full-service healthcare facility and the name was changed to Odessa Regional Medical Center to reflect its larger campus and more comprehensive services. The hospital has 225 beds and has approximately 250 physicians on staff and has over 700 employees. Today, ORMC offers a wide spectrum of healthcare services, including advanced diagnostic imaging technology, emergency care, innovative surgical procedures, maternity care, comprehensive cardiac services and general medical care. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Odessa Regional Medical Center was founded in 1975 as Odessa Women’s and Children’s Hospital. Through the years, the hospital grew and evolved into a full-service healthcare facility and the name was changed to Odessa Regional Medical Center to reflect its larger campus and more comprehensive services. The hospital has 225 beds and has approximately 250 physicians on staff and has over 700 employees. Today, ORMC offers a wide spectrum of healthcare services, including advanced diagnostic imaging technology, emergency care, innovative surgical procedures, maternity care, comprehensive cardiac services and general medical care. #ZR #EXP

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking a Radiation Effects Engineer to assist our team in the execution and development of our company's Radiation Hardness Assurance Program. This includes planning and execution of radiation test campaigns as well as mission environment and spacecraft shielding analysis. This role is critical in ensuring that our hardware can withstand the harsh radiation conditions encountered in orbit. You will coordinate closely with design teams to identify parts requiring qualification, develop and manage test campaigns with external laboratories, and interpret results to guide structure design and component selection. What you'll be doing: • Coordinate with electrical design and systems engineering teams to identify electronic components requiring radiation characterization or qualification., • Coordinate with mechanical and packaging teams to identify proper satellite structure design to mitigate dosing effects, single event effects, and spacecraft charging effects., • Develop and maintain radiation test campaign plans — including test objectives, radiation source selection, test levels, sample selection, and acceptance criteria., • Engage and manage test laboratories (e.g., heavy ion, proton, gamma, or Co-60 facilities), ensuring test setups and conditions meet project requirements, • Prepare test articles and documentation in advance of test campaigns, including part and equipment lists, schematics, and biasing conditions., • Oversee or conduct test execution, coordinating logistics, facility scheduling, and data acquisition., • Analyze and interpret radiation test data, prepare reports, and communicate findings and design recommendations to internal stakeholders., • Contribute to design reviews by providing expertise on radiation effects and mitigation strategies and guide component selection and structure design. What you bring to this role:, • 3+ years of experience with radiation testing or analysis of electronic components., • Working knowledge of radiation effects on semiconductors, including Total Ionizing Dose (TID), Single-Event Effects (SEE), and Displacement Damage (DD)., • Working knowledge of Spacecraft Charging Effects and familiarity with NASA-HDBK-4002, NASA-STD-4005, or similar, • Experience with Mission Environment Generation tools such as OMERE, SPENVIS, or similar. ., • Experience preparing and executing radiation test campaigns in collaboration with an internal team and external laboratories., • Strong analytical and communication skills, with the ability to present complex technical results clearly., • Familiarity with industry standards (e.g., MIL-STD-883, ESCC, NASA, or ESA ECSS standards)., • Travel required to support test campaigns. Extra points for the following:, • Bachelor’s or master's degree in electrical engineering, Physics, or related field., • Experience with spaceborne systems or radiation-tolerant component design., • Hands-on experience in lab testing or data analysis tools (LabVIEW, MATLAB, Python)., • Experience with structural dose analysis and shielding optimization tools such as FASTRAD or similar, • Experience with single event effects tools such as CREME96 or similar • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The Staff Test Electrical Engineer of Test Systems will participate in all phases of testing avionics flight and ground hardware for E-Space satellites. You will work collaboratively with engineers of various disciplines to develop the automated test framework for satellite avionics and systems including test methods, custom PCBAs, harnesses, and other hardware, and ultimately support the rigorous flight-like testing of satellite hardware. The ideal candidate has 5+ years of experience in custom electronics design and testing. This position will report to the Test Engineering Lead and will work closely with the Test, Electrical, and Systems Engineering teams. The successful candidate will be based in our Saratoga, CA office. What you’ll be doing: • Own the custom functional test equipment design from clean sheet to flight hardware production test., • Develop functional test PCBA and other hardware requirements, architectures, and con-ops in collaboration with other engineering disciplines., • Schematic capture and PCB layout of power, digital, and analog instrumentation circuit PCBAs using Altium Designer., • Develop test strategies and plans in collaboration with flight HW designers and other engineering disciplines., • PCBA and other HW manufacturing, design validation, and integration of automated test systems., • Circuit simulation and analysis in SPICE, Excel, etc., • Support SW engineers in the development of automated test control software., • Execute flight hardware qualification and production acceptance testing including ambient functional and environmental tests., • Support DUT anomaly resolution., • Contribute to the development of engineering and production best practices to support most efficient manufacturing. What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or similar., • 10+ years of experience in electronics hardware development and testing including schematic capture, PCB layout, hardware characterization testing, and automated test implementation., • Proficiency with electrical test equipment including power supplies, loads, oscilloscopes, thermal chambers, etc., • Strong documentation skills for test procedures, results, analysis, etc., • Demonstrated success working in a dynamic environment. Bonus points for the following:, • Programming skills in Python, Tcl, and C/C++., • Proficiency with Altium Designer for schematic capture and PCB layout., • Experience with mechanical design in Solidworks. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionJoin the fastest growing outpatient radiology practice in the Nation- SimonMed Imaging! Our commitment to excellence and improving patient care paired with the best in class technology allows us to be an industry leader in the constantly evolving health care environment. Secure your spot now and take advantage of a unique career opportunity to advance your skills while working alongside a dedicated team of board-certified subspecialty radiologists. We can’t wait to meet you!Job Overview • We are seeking a skilled and compassionate X-ray Technologist to join our outpatient imaging team. The ideal candidate will perform diagnostic radiographic procedures with precision, accuracy, and attention to patient comfort. As part of a multidisciplinary team, the technologist will contribute to patient care by producing high-quality images that aid in diagnosis and treatment planning.Key Responsibilities, • Perform high-quality diagnostic X-ray exams as prescribed by physicians, • Prepare and position patients accurately to achieve optimal imaging results, • Ensure patient safety and comfort throughout the imaging process, • Operate and maintain X-ray equipment, ensuring proper calibration and functionality, • Review images for quality assurance and follow protocols for image storage, • Adhere to established radiation safety standards and infection control guidelines, • Document patient information accurately and complete reports as required, • Collaborate with other radiology and healthcare professionals to support optimal patient care, • Maintain knowledge of advancements in radiologic technology and imaging techniquesQualifications, • Certification: ARRT (American Registry of Radiologic Technologists) certification in, • Radiography required, • Licensure: Current state licensure as required by law, • Education: Associate's degree in Radiologic Technology or equivalent from an accredited program, • Experience: Minimum of 1-2 years of experience as an X-ray Technologist, preferably in an outpatient or clinical settingSkills and Competencies, • Strong knowledge of radiologic procedures, anatomy, and patient positioning, • Proficiency with imaging software and radiologic equipment, • Excellent interpersonal and communication skills, with a patient-centered approach, • Ability to work effectively in a fast-paced environment and handle multiple priorities, • Detail-oriented with strong organizational skills, • Commitment to maintaining patient confidentiality and professionalism at all timesPreferred Qualifications, • Experience in outpatient or ambulatory care setting, • BLS (Basic Life Support) certification, • Knowledge of additional imaging modalities (e.g., CT, MRI) is a plusBenefits

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. As a Senior Antenna Design Engineer, you will own the end-to-end design, simulation, and validation of advanced antenna systems for E-Space’s LEO satellite constellation and ground infrastructure. You are expected to independently design antennas using full-wave electromagnetic simulation tools, with HFSS as a primary design environment, and drive designs from concept through hardware validation.What you will do: • Antenna Architecture and Design, • Lead the end-to-end design of antenna systems for spaceborne and/or ground-based applications, • Independently design antennas and phased array systems using ANSYS HFSS, from initial concept through final layout, • Define antenna architectures supporting beamforming, beam steering, and multi-beam operation, • Design and optimize phased array antennas, including element design, array layout, feed networks, and radiation pattern control, • Perform antenna trade studies considering performance, size, weight, power, thermal, and manufacturability constraints, • Simulation, Analysis, and Optimization, • Perform detailed full-wave EM simulations in HFSS to evaluate gain, efficiency, bandwidth, polarization, sidelobe levels, and mutual coupling, • Optimize antenna designs to meet system-level requirements such as coverage, link budget, and interference mitigation, • Use MATLAB or Python for post-processing, parametric sweeps, and design automation, • Hardware Development and Testing, • Work closely with RF, mechanical, and manufacturing teams to transition HFSS designs into physical hardware, • Support antenna prototyping, integration, and validation testing, • Define and execute antenna test plans, including chamber, range, and over-the-air (OTA) measurements, • Analyze measurement results and correlate test data with HFSS simulation results, • Cross-Functional Collaboration and Leadership, • Collaborate closely with Systems Engineers, RF Engineers, Payload Engineers, and Network Design teams to ensure antenna designs meet end-to-end system requirements, • Provide technical mentorship and design guidance to junior engineers, • Help establish antenna design standards, workflows, and best practices across the organizationTechnical Requirements:, • Antenna and RF Fundamentals, • Strong background in antenna theory, electromagnetics, and RF engineering, • Deep experience with phased array antennas and beamforming techniques, • Simulation and Design Tools, • Expert-level proficiency with ANSYS HFSS for antenna design and simulation, • Experience with additional EM tools (CST, FEKO) is a plus, • Proficiency with MATLAB and/or Python for analysis and automation, • Hardware and Measurement, • Hands-on experience with antenna prototyping, integration, and testing, • Familiarity with RF test equipment and antenna measurement techniquesWhat you bring to this role:, • Master’s or PhD in Electrical Engineering or a related field, with a focus on Antennas, Electromagnetics, or RF Systems, • 7+ years of hands-on antenna design experience, including full-wave EM simulation, • Demonstrated ability to independently design antennas in HFSS and take designs to hardware, • Strong system-level thinking and ability to translate requirements into high-performance antenna solutions, • Excellent analytical, problem-solving, and communication skillsBonus Points:, • Experience designing antennas for space or aerospace applications, • Familiarity with LEO satellite systems and non-terrestrial networks (NTN), • Experience with active electronically steered arrays (AESA) • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking Power Electronics Engineers to design and qualify power subsystems for a next-generation satellite constellation. You will be responsible for power distribution, battery management, charge regulation, and power conditioning circuits across multiple avionics boards. The role demands deep analog and power design expertise, combined with the rigor required for space-grade hardware. Key Responsibilities: • Design DC/DC converter power stages including switching device selection, filter design, driver circuits, and magnetics., • Develop battery management and charge regulation circuits with appropriate safety, cycle-life, and charging-profile considerations., • Perform control-loop modeling and compensation for analog and digitally controlled power supplies., • Design fault-protection circuits including overcurrent break, current clamp, overvoltage clamp, crowbar, and foldback protection., • Implement current, voltage, and temperature sensing circuits with filtering, threshold triggers, and ADC integration., • Perform component derating analysis and design for radiation tolerance across all power subsystems., • Develop load accounting, mode-based power consumption estimates, and concept-of-operations power budgets., • Design power distribution networks with DC load switches, telemetry, and protection for multiple subsystem loads., • Collaborate with PCB layout engineers on power supply layout optimization (loop area minimization, noise reduction, switching node management)., • Support FPGA and digital teams with power supply sequencing, support circuitry, and power integrity requirements.Required Qualifications:, • Bachelor’s or Master’s degree in Electrical Engineering or related field., • 5+ years of experience in power electronics design for aerospace, defense, or high-reliability systems., • Proven experience designing DC/DC converters, LDOs, and power distribution systems., • Strong understanding of control-loop theory (analog and digital compensation, stability analysis)., • Experience with fault protection design and safe operating area analysis., • Proficiency with circuit simulation tools (SPICE, LTSpice, or equivalent)., • Knowledge of component derating standards and radiation tolerance considerations for space applications.Preferred Qualifications:, • Experience with satellite or spacecraft power subsystems (PDU, BMS, BCR, solar array interfaces)., • Background in lithium-ion battery performance, safety, and packaging considerations., • Experience with motor-drive design and inductive-load drivers (solenoids, magnetorquers)., • Familiarity with orbit-geometry analysis for power-balance and eclipse-cycle planning., • Understanding of solar panel I-V characteristics, harvesting topologies, and degradation modeling., • Supply-chain awareness including long-lead component identification and pre-buy strategies.Tools & Technologies:, • SPICE-based circuit simulation (LTSpice, PSpice, or equivalent), • Altium Designer (schematic capture), • HyperLynx PI (power integrity analysis) • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. As a Senior AIT Engineer, you will participate in the E-Space satellite assembly, integration, and testing (AIT) activities. As part of the E-Space AIT team, you will have the opportunity to test thousands of flight hardware units and directly contribute to the success of an innovative satellite architecture on-orbit. This position is based in Saratoga, CA.What you will be doing: • Spacecraft sub-system acceptance:, • • Organize the acceptance of the spacecraft sub-systems before integration to the flatsat (EM), or to the satellite structure (FM), • EM flatsat activities:, • • Define the Verification and Validation (V&V) requirements for the activity, • • GSE definition and procurement, • • Satellite procedure creation and execution on the flatsat, • • Result collection, • • V&V requirement Statement of Compliance, • • Participate in the spacecraft unit qualification test campaigns, • FM AIT activities:, • • GSE definition and procurement, • • Satellite procedure creation and execution on the FM Spacecraft, • • Result collection, • • V&V requirement Statement of Compliance, • • Participate in the FM Satellite environmental test campaignsWhat you bring to this role:, • 7+ years of experience in spacecraft engineering, • Experience with a satellite AIT campaign, • Good understanding of spacecraft subsystem development, having been involved in the development of at least one, • Understanding of electrical test equipment, test procedures, data acquisition systems, and instrumentation, • Experience in environmental testing such as vibration, shock, thermal, and TVAC, • Programming experience in Python, MATLAB/Simulink, • Demonstrated success working in a dynamic environmentBonus points for the following:, • Bachelor of Science degree in Engineering, • Experience with radiation effects testing • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are hiring a Board Reliability Simulation Engineer to lead reliability analysis and simulation for all avionics boards in our satellite program. You will use tools like Ansys Sherlock to predict board-level reliability, identify failure modes, and drive design improvements that ensure long mission life in the space environment. Key Responsibilities: • Perform board-level reliability simulations using Ansys Sherlock and related analysis tools., • Develop and execute HALT/HASS test strategies for avionics boards., • Conduct Mean Time To Failure (MTTF) modeling and life-prediction analysis for board assemblies., • Perform Weibull analysis and reliability-distribution modeling from test and field data., • Develop DFMEA/FMEA and integrate findings into design cycles., • Identify infant-mortality characteristics and develop early-life failure reduction strategies., • Create stress screening plans covering thermal, vibration, and electrical overstress., • Perform component derating analysis aligned with reliability standards for space applications., • Evaluate electronic components for radiation tolerance (TID, SEE, SEU, SEL, SET, SEB) in collaboration with design engineers., • Analyze semiconductor manufacturing processes and their impact on radiation performance., • Document reliability results, methods, and recommendations clearly for design teams., • Collaborate with design, manufacturing, and test teams to improve long-term system robustness.Required Qualifications:, • Bachelor’s or Master’s degree in Electrical Engineering, Reliability Engineering, Materials Science, or related field., • 3+ years of experience in reliability engineering or analysis for electronics., • Experience with reliability simulation tools (Ansys Sherlock strongly preferred)., • Knowledge of FMEA/DFMEA methodologies and reliability standards., • Understanding of failure mechanisms in electronic assemblies (solder fatigue, via cracking, component wear-out)., • Experience with statistical analysis of test data and reliability modeling.Preferred Qualifications:, • Experience with satellite or spacecraft hardware reliability analysis., • Background in radiation effects analysis and component qualification for space., • Familiarity with Weibull analysis tools and accelerated-life testing methods., • Experience interpreting radiation test reports and vendor lot-specific performance data., • Knowledge of IPC and ECSS reliability standards., • Understanding of PCB manufacturing processes and their reliability implications.Tools & Technologies:, • Ansys Sherlock (board-level reliability simulation), • MATLAB or Python for statistical analysis and modeling • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job Description Job Description: Product Engineer Location: San Jose HiRel Department: Operations Reports To: Product & Test Engineering Manager, Juan Lopez Summary: The Product Engineer for high reliability Hybrid DC-DC converters for Space and Military applications supports the development and production of new devices and takes product engineering responsibility throughout the product life cycle - from development to production ramp-up and qualification. This position will have a direct impact on meeting our productivity targets and our customers’ expectations. Essential Duties & Responsibilities: • Responsible for DC-DC products (documentation, troubleshooting, analysis, and qualification) to meet Production Yield Goals., • Support production by troubleshooting DC-DC Converters, supporting functional tests, and providing trimming process guidance., • Ensure non-conformances are resolved from failure mode to root cause through corrective and preventative action., • Perform analyses (Stress and Thermal Analysis, MTBF –Reliability) as necessary., • Design and develop test hardware, using Cadence Allegro, and perform simulations for analysis., • Support the release of design packages and review customer specification datasheets., • Support external tests, such as vibration and shock, and radiation tests, including Total Ionizing Dose (TID) and Single Event Effects (SEE)., • Develop and implement test fixtures for ATE (Chroma) conversion projects., • Initiate, write & release new test programs to ensure timely new-product release to production., • Perform test validation, improvement, qualification, and release to production per corporate standards and procedures., • Work with operations to identify and document test improvement opportunities., • Support the test engineering and design teams in defining proper test concepts. Other Duties & Responsibilities: • Comply with all safety policies, practices, and procedures., • Comply with all quality and ITAR policies, practices, and procedures., • Build meaningful and productive relationships with internal business partners., • Participate in proactive team efforts to achieve departmental and company goals., • Contribute to building a positive team spirit., • Communicate effectively with all levels of employees., • Protect confidential information by not communicating, disclosing to, or using it for the benefit of 3rd parties., • Maintain the highest degree of honesty and integrity at all times., • Perform other duties as assigned. Page Break Job Qualifications: • Masters/Bachelor’s Degree in Electrical Engineering or related Field., • 5 to 10 years of experience in related product and/or engineering experience., • Strong understanding of electronic engineering principles in areas including analog and digital circuits, power supplies, and DC-DC converters., • Experience in PCB schematic capture tools such as OrCAD / Cadence Allegro., • Basic programming experience programming in C / C++, VBasic or Python, or LabView is a plus., • Hands-on experience performing bench electrical measurements using signal generators, DVMs, oscilloscopes, and spectrum analyzers., • Excellent analytical and problem-solving skills, as well as teamwork capabilities., • Excellent communication skills and ability to interact with multiple stakeholders. Job Skills: • Design tools/fixtures with minimal guidance., • Standard electronic laboratory equipment: (i.e. Oscilloscopes, Pulse/Signal Generators, Parametric Analyzers, Spectrum Analyzers, etc)., • Knowledge in semiconductor manufacturing is a plus., • Fast technical document generation/modification CAD, Excel, and PCB software is a plus., • Knowledge in military standards (MIL-PRF38534, MIL-PRF-38535, MIL-STD-883, JSTD-001) is a plus., • Self-motivated with the ability to align priorities in accordance with business goals and meet deadlines in a fast-paced environment., • Team player who enjoys working with different disciplines., • High-energy, results-focused self-starter., • Strong analytical ability and decision-making., • Ability to exercise flexibility with quickly changing data requests., • Ability to adapt quickly and learn new tasks independently., • Ability to manage competing priorities., • Excellent organization and planning skills., • Effective communication skills (written & verbal). At Micross, our Core Values of integrity, communication, teamwork, quality and execution, self-discipline and accountability are cultivated throughout all levels of the organization. Micross provides a challenging and enjoyable workplace for members and supports the needs of the community. Micross provides competitive benefits including medical, HSA and FSA plans, dental, vision, company paid basic Life Insurance, Employee Assistance Program (EAP), 401k with employer match, paid leave, vacation, holidays, generous tuition assistance, 529 College Savings, Pet insurance, Legal insurance, and a range of well-being programs available. Salary and benefits commensurate with qualifications and experience.