Trabajos welder en Long Beach, CaliforniaCrear alertas

Job Description HVAC AND BUILDING MAINTENANCE TECHNICIAN Summary Description: Under directions of the Facility Manager and/or Lead Maintenance, performs a variety of preventative maintenance and general handyman repairs to commercial buildings and equipment. Maintains office, warehouse, retail store/emergency equipment and systems. Manages and completes written work orders for general building repairs. Maintain emergency equipment and systems. Exemplary Duties / Responsibilities: • Performs advanced building and equipment repairs including electrical, lighting, plumbing, air conditioning, concrete, painting, installations and repairs., • Minor construction work to include stud framing, gypsum wall boarding; door, window, and hardware installation; vinyl composition and ceramic floor tile installations., • Works closely with and delegate’s assignments to maintenance helpers. Handles task independently and as a team., • Drives company vehicle to and from job sites and/or to supply vendors for purchasing parts., • Inspect emergency systems to include fire extinguishers, smoke detectors, and actuated lighting systems. Inspects and corrects safety problems and file reports to the Facility Manager and/or Lead Maintenance., • Keeps the maintenance workshop and department vehicles clean and organized., • Performs all related work as required., • Monthly preventative maintenance inspections and repairs on packaged rooftop HVAC units. (80 total), • EPA certified in type 1, 2, and 3 refrigerants., • Know how to operate various tests and repair equipment’s to include manifold gage set, voltage/amperage/continuity testers, metering gages, refrigerant recovery machine, vacuum pump, gas regulators, acetylene/oxygen welder and other hand and power tools., • Drive company vehicle to job site and to purchase parts and/or supplies for repairs., • Able to read and understand HVAC manuals, drawings, and schematics., • Identity the cause of breakdowns and determine the best course of action needed for repairs., • Diagnose, repair and/or replace defective parts to include refrigerant compressors, economizer controls, igniter controls, circuit boards, motors, contactors, relays, thermostats, and various other internal/external components., • Locate, negotiate, and purchase replacement parts., • Performs inventory and maintains supply of air filters for all units., • Advises the facility manager of all problems and issues prior to performing repairs. PHYSICAL ANALYSIS Physical Demands and Working Conditions: • Standing and walking for up to 7 hours. Some sitting may vary., • Lifting, carrying, pushing, and pulling up to 50 lbs., • Climbing, balancing, bending, and twisting required., • Finger and manual dexterity required., • Work inside and outside required., • Vibrations, hazards (physical), fumes, dust, and odors: occasionally., • Chemicals: occasionally., • Extreme cold, heat, wet or humid conditions: occasionally. Minimum Qualifications: Education/Experience: • High School Diploma or equivalent., • Minimum three years working experience or schooling in related field., • Minimum five years’ experience in HVAC, • Able to stand and walk up to 7 hours per day., • Able to lift, push, and pull up to 50 lbs., • Must have knowledge of building construction, carpentry, electrical, plumbing, and painting. Knowledge of air conditioning system with a 608 EPA or electrical certification helpful., • Must know how to operate all power repair tools in a safe and effective manner., • Valid CA Driver’s License: clean DMV printout, and be insurable to drive company vehicles., • HVAC Type I, II or III and EPA Universal Certification Desirable Qualifications: • Able to work with a diversified population and people with barriers to employment., • Able to work efficiently, safely, and in a cost-effective manner., • Able to follow instructions and operate with minimal supervision. Core Competencies: To perform the job successfully an individual should demonstrate the following competencies: • Maintenance & Technical Operations - Demonstrates expert knowledge of HVAC systems, electrical and refrigeration diagnostics; keeps certifications current; shares knowledge with peers and apprentices., • Task & Operational Efficiency - Quickly identifies and troubleshoots system issues; uses logic and experience to develop efficient, cost-effective solutions; performs under pressure during equipment failures or emergencies., • Inventory, Resource & Budget Management - Effectively manages time, tools, and materials; prioritizes service calls and preventative maintenance; completes assignments on time and within budget., • Communication & Customer Service - Responds quickly and respectfully to internal and external service requests; ensures comfort systems are operational with minimal disruption; communicates technical details clearly to non-technical audiences., • Training, Teamwork & Collaboration - Collaborates well with maintenance and facilities staff; assists team members during critical repairs or high-demand periods; supports a positive and productive work culture., • Leadership & Talent Development - Maintains composure under stress; listens actively; communicates professionally with coworkers, vendors, and clients, even in emotionally charged situations., • Safety, Compliance, & Risk Mitigation - Clearly explains technical issues and repair plans; provides status updates to supervisors; participates actively in safety meetings and team discussions., • Ethics & Integrity - Demonstrates integrity and alignment with Goodwill’s core values; adheres to safety, environmental, and operational policies and standards even when unsupervised. LOCATION: • Corporate Office, while servicing all Goodwill Southern Los Angeles County locations as needed. This job specification should not be construed to imply that these requirements are the exclusive standard of the position. Incumbents will follow any other instructions, and perform any other related duties, as may be required by their supervisor.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stage Manufacturing team turns design into reality, owning the build of Terran R's primary structures. This isn't about turning the same bolt every day; it's about building the systems to build the rocket. Engineers and technicians work side by side, with deep collaboration and real-time feedback, to shape how we build better and faster. With a manifest and a launch date, it's up to the team to deliver on Terran R: solving challenges in real time, optimizing for scale, and constantly improving processes. As the vehicle evolves, so will the factory, with opportunities to apply automation, machine learning, and advanced technologies. What we build here sets the blueprint for the future of scaled launch. This is a 2nd shift position with a standard schedule of 3:00 PM – 1:30 AM PT, Monday through Friday. The role includes a 10% shift differential added to the base pay. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: • Set up and operate orbital tube welding machine and necessary purge equipment., • Prep, assemble, fit up, and tack complex fluids assemblies at on assemblies at elevated heights., • Verify weld quality visually and using a borescope system., • 4+ years of OTW experience, • Experience with welding and tacking, • Experience with aerospace mechanical assembly, • Comfortable working in a confined space., • Familiarity with COPV's, • Experience with rigging and crane operations, • Familiar with AWS D17.1., • 100% health care coverage on your first day, • Quarterly wellness stipend to use on health and wellness, • Partnership with Modern Health with access to 8 therapy & coaching sessions and mental health resources, • Discounts on gym memberships, travel and entertainment through PerkSpot, • Unlimited onsite snacks, • Free lunch on Mondays and Fridays, • Annual learning and development stipend, • PPE Stipend, • Pet Insurance through Fetch, • Company Paid Life Insurance, Short Term Disability, and Long Term Disability, • Up to 12 weeks salary continuation for paid pregnancy disability leave, • 8 Weeks company paid parental leave Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$35.25—$45.65 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. Utilize a variety of techniques and equipment to create custom fabricated steel parts and assemblies. Responsibilities include cutting materials, fitting up parts, welding parts together, and checking for quality per standards. Must follow all established safety and quality procedures. Work to be performed in the shop or on a construction site as needed and assigned. Pipe welding experience is a plus. Duties Include: • Read blueprints and drawings and take or read measurements to plan layout and procedures., • Determine the appropriate welding equipment or method based on requirements., • Set up components for welding according to specifications and drawings., • Operate tools and equipment to prepare the parts that must be welded together., • Align components using jigs, clamps, calipers, rulers, and other devices., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)., • Assist with repairing machinery or equipment as needed by welding pieces and filling gaps., • Test and inspect welded surfaces and structure to discover flaws., • Erect and dismantle temporary scaffolding on job sites if needed., • Perform basic safety checks and preventative maintenance functions on tools and equipment., • Be able to lift 50 lbs., • Clean work area, machines, tools, and equipment., • Process paperwork associated with the above-listed tasks. Employee Must: • Be at least 18-years old., • Have high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background check., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have valid driver’s license and reliable, insured transportation., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Have good communication skills., • Have good attendance and show up to work on time every day., • Have strong basic math and measuring skills., • Be able to pass welding tests for stick and flux core. Benefits: • Competitive Pay with annual reviews., • Health, Dental and Vision insurance., • Paid Time Off (Begins accruing immediately), • 401k with company contribution, • Ability to work overtime. YXO2hzGBiD

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. f6yCdUDfWi

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stage Manufacturing team turns design into reality, owning the build of Terran R's primary structures. This isn't about turning the same bolt every day; it's about building the systems to build the rocket. Engineers and technicians work side by side, with deep collaboration and real-time feedback, to shape how we build better and faster. With a manifest and a launch date, it's up to the team to deliver on Terran R: solving challenges in real time, optimizing for scale, and constantly improving processes. As the vehicle evolves, so will the factory, with opportunities to apply automation, machine learning, and advanced technologies. What we build here sets the blueprint for the future of scaled launch. This is a 1st shift position with a standard schedule of 5:00 AM - 3:30 PM PT, Monday through Friday. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: • Collaborate with weld development team to develop and perform GTAW weld processes which will include: manual and semi-automated welding of aluminum, stainless steel, and Inconel., • Prepare tooling and parts by trimming, beveling, cleaning, aligning, assembling, and tack welding., • Help set up and optimize the production shop floor following 5S principles, loading and unloading hardware with use of overhead cranes or forklifts, installing structural mechanical piece parts and tooling, performing dimensional fitment inspections, accurately use precision measuring tools such as micrometers, calipers, and torque wrenches, performing visual weld inspections, perform precision blending using hand tools to prepare metallic surfaces for welding and non-destructive evaluation., • Problem Solving: Identify and resolve issues in the manufacturing process, which could include defects in materials, equipment malfunctions, or inefficiencies in production methods. Work with engineering to implement improvements., • Safety & Quality: Work alongside teammates to build a culture of safety, precision, and right-first-time., • 3+ year's performing GTAW welding., • Ability to follow work order instructions and read part drawings., • Ability to work at heights and in confined spaces., • 3+ years of aerospace fabrication/mechanical experience in related field. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$35.25—$45.65 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! ORBITAL TUBE WELDER II/III Based out of Rocket Lab Headquarters in Long Beach, California the Orbital Tube Welder will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines. (Please note: this position can be hired at the Orbital Tube Welder II or Orbital Tube Welder III level) WHAT YOU'LL GET TO DO: • Develop weld schedules for OTW from tubing sizes ranging from 1/4" to 6"., • Perform tube bending, flaring, fit up, and preparation to meet project specifications and industry standards, • Read and interpret blueprints, schematics, and technical drawings to execute tubing projects accurately., • Operate and maintain orbital tube welding equipment (e.g., Orbitalum or AMI systems) to ensure high-quality welds. YOU'LL BRING THESE QUALIFICATIONS AS A ORBITAL TUBE WELDER II: • 2+ years of OTW experience in aviation, aerospace, or similar industry, • Experience working with tubing sizes ranging from 1/4" to 6"., • High school diploma or GED. YOU'LL BRING THESE QUALIFICATIONS AS A ORBITAL TUBE WELDER III: • 5+ years of OTW experience in aviation, aerospace, or similar industry, • Experience with OTW machines or automated fabrication equipment., • Knowledge of NDE (Non-Destructive Examination) processes to inspect and verify the integrity of tubing and welds. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • 8+ years of OTW experience in aviation, aerospace, or similar industry, • Certification in welding or tube fabrication., • Familiarity with industry standards such as ASME or ISO., • Solid understanding of NDE (Non-Destructive Examination) processes ADDITIONAL REQUIREMENTS • Willing to work Monday - Friday (A-shift 6:00am-2:30pm or B-shift 2:00pm-10:30pm), • Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position, • Able to lift up to 25lbs. unassisted, • Must be able to climb ladders and be comfortable working in tight spaces., • Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls., • Must be able to walk or stand for extended periods – 8 hours min, • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces #RL1 Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$30—$40 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! WELDER, PRECISION FINISHING TECHNICIAN III / SENIOR Based out of Rocket Lab Headquarters in Long Beach, California the Welder, Precision Finishing Technician III / Senior will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines. WHAT YOU'LL GET TO DO: • Follow procedures to set up and operate our welding systems., • Weld assemblies according to work orders, blueprints and verbal instructions., • Follow blueprints and meet product specifications within tight tolerances. YOU'LL BRING THESE QUALIFICATIONS AS A WELDER: • 8+ years of experience in welding with a focus on advanced techniques., • Experience in industries such as Aerospace, Automotive, Shipbuilding, or Construction., • Familiarity with industry standards and codes (e.g., ASME, ANSI, ISO, D17.1)., • Proficient in various welding techniques, including manual GTAW(TIG), OTW (Orbital Tube Welding), Laser Welding, Lathe Welding., • Ability to read and interpret blueprints, schematics, and welding symbols., • Experience welding on .011 - .250. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Experience with welding on different materials such as Inconel, Monel, Stainless 300-400 series., • Experience working with 3D printed parts and exotic alloys., • Experience in metal fabrication and assembly., • Experience with Deburring and using pencil grinders., • Capable of doing welding fit ups., • Capable of supporting the grinding department. CERTIFICATIONS • Certified Welder., • Certifications in specialized welding processes (TIG / Brazing process)., • Certification for specific materials (e.g., Stainless Steel, Aluminum, Titanium, and Inconel). ADDITIONAL REQUIREMENTS: • Willing to work Monday - Thursday (3:15pm - 1:45am), • Ability to travel and communicate outside of work hours, • Must be able to work extended hours and/or weekends as needed, • Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position., • Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls., • Must be able to walk or stand for extended periods – 8 hours min, • Must be able to lift up to 25lbs. unassisted. #RL1 Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$30—$45 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stage Manufacturing team turns design into reality, owning the build of Terran R's primary structures. This isn't about turning the same bolt every day; it's about building the systems to build the rocket. Engineers and technicians work side by side, with deep collaboration and real-time feedback, to shape how we build better and faster. With a manifest and a launch date, it's up to the team to deliver on Terran R: solving challenges in real time, optimizing for scale, and constantly improving processes. As the vehicle evolves, so will the factory, with opportunities to apply automation, machine learning, and advanced technologies. What we build here sets the blueprint for the future of scaled launch. This is a 2nd shift position with a standard schedule of 3:00 PM – 1:30 AM PT, Monday through Friday. The role includes a 10% shift differential added to the base pay. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: • Collaborate with weld development team to develop and perform GTAW weld processes which will include: manual and semi-automated welding of aluminum, stainless steel, and Inconel., • Prepare tooling and parts by trimming, beveling, cleaning, aligning, assembling, and tack welding., • Help set up and optimize the production shop floor following 5S principles, loading and unloading hardware with use of overhead cranes or forklifts, installing structural mechanical piece parts and tooling, performing dimensional fitment inspections, accurately use precision measuring tools such as micrometers, calipers, and torque wrenches, performing visual weld inspections, perform precision blending using hand tools to prepare metallic surfaces for welding and non-destructive evaluation., • Problem Solving: Identify and resolve issues in the manufacturing process, which could include defects in materials, equipment malfunctions, or inefficiencies in production methods. Work with engineering to implement improvements., • Safety & Quality: Work alongside teammates to build a culture of safety, precision, and right-first-time., • 3+ year's performing GTAW welding., • Ability to follow work order instructions and read part drawings., • Ability to work at heights and in confined spaces., • 3+ years of aerospace fabrication/mechanical experience in related field. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$35.25—$45.65 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stage Manufacturing team turns design into reality, owning the build of Terran R's primary structures. This isn't about turning the same bolt every day; it's about building the systems to build the rocket. Engineers and technicians work side by side, with deep collaboration and real-time feedback, to shape how we build better and faster. With a manifest and a launch date, it's up to the team to deliver on Terran R: solving challenges in real time, optimizing for scale, and constantly improving processes. As the vehicle evolves, so will the factory, with opportunities to apply automation, machine learning, and advanced technologies. What we build here sets the blueprint for the future of scaled launch. This is a 1st shift position with a standard schedule of 5am-3:30pm PT, Monday through Friday. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: • Set up and operate orbital tube welding machine and necessary purge equipment., • Prep, assemble, fit up, and tack complex fluids assemblies at on assemblies at elevated heights., • Verify weld quality visually and using a borescope system., • 4+ years of OTW experience, • Experience with welding and tacking, • Experience with aerospace mechanical assembly, • Comfortable working in a confined space., • Familiarity with COPV's, • Experience with rigging and crane operations, • Familiar with AWS D17.1., • 100% health care coverage on your first day, • Quarterly wellness stipend to use on health and wellness, • Partnership with Modern Health with access to 8 therapy & coaching sessions and mental health resources, • Discounts on gym memberships, travel and entertainment through PerkSpot, • Unlimited onsite snacks, • Free lunch on Mondays and Fridays, • Annual learning and development stipend, • PPE Stipend, • Pet Insurance through Fetch, • Company Paid Life Insurance, Short Term Disability, and Long Term Disability, • Up to 12 weeks salary continuation for paid pregnancy disability leave, • 8 Weeks company paid parental leave, • Access to One Medical At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$35.25—$45.65 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionDescription: Join our expanding team! Tri Star Industrial is a leading distributor of pipe, valves, fittings, tanks, and industrial supplies, proudly serving a wide range of industries. With deep local roots and national reach through the Venturi Supply platform, our mission is to deliver the critical materials, custom solutions, and reliable service our customers depend on. At the heart of everything we do is our people. From the shop floor and counter to the job site and field, our team’s expertise, commitment, and problem-solving mindset set us apart. Their dedication fuels our service, drives our accuracy, and ensures every order is handled with care and urgency. Backed by strategically located branches, a vast inventory, in-house fabrication capabilities, and decades of real-world experience, our teams connect infrastructure and industry to the essential resources they need to operate safely, efficiently, and successfully. We’re more than a distributor—we’re a trusted partner built on strong relationships, operational know-how, and a relentless focus on customer success. Role Overview The role of Welder includes construction of various fabricated parts and assembly from engineered prints by cutting, fitting, and welding. Responsibilities • Operates welding equipment to fabricate components and assemblies including structural frames, piping, tanks, and ASME pressure vessels., • Read blueprints and drawings to build designed fabrications., • Determine the appropriate welding equipment or method based on welding procedures., • Lay out and fit up fabricated components with tight tolerances indicated in drawings/prints using appropriate tools., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead) which may be subjected to non-destructive testing (NDE including but not limited to Xray, PT, MT, UT)., • Visually inspect welds and material and repair flaws by cutting, grinding, or air arc., • Maintain equipment in condition that does not compromise safety., • Keep a clean and organized work area., • Performs additional duties as assigned or required.Requirements:, • High School Diploma or GED Required., • Certified in GTAW ASME IX required., • 1 or more years of experience in TIG., • 1 or more years of experience using tools relevant to welding and fabrication (saws, squares, grinders, torches, etc.), • Ability to read and interpret technical documents and drawings. This includes welding symbols and fabrication instructions on blueprints., • Able to read a tape measure and utilize math skills required for fabrication., • Ability to effectively communicate [written and verbal]., • Thrives in a collaborative team environment., • Detailed oriented work style comfortable with multiple priorities being juggled while maintaining a consistent work approach., • Physical requirements: Lift/push/pull 50 lbs., bend twist, stand for extended periods of time. Climb and reach for items, use an overhead crane, forklift, and endure frequent exposure to outside weather conditions., • Ability to pass a background check, MVR check, and drug test. Benefits We're dedicated to our employees' and their families' health and well-being. • Two medical plans, including HSA-qualified, with virtual care., • Dental and vision coverage, including kids' orthodontia., • HRA reimbursement eligibility., • Enjoy 10 paid holidays and accrue PTO from your first day., • Access a robust Employee Assistance Program (EAP) with 24/7 support for you and your family., • Join a team that values integrity and innovation., • Grow as a leader in industrial distribution with cutting-edge automation and supply chain solutions., • Be part of a company that prioritizes people over profits. Venturi Supply and its affiliated companies are dedicated to fostering a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate against individuals based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or any other legally protected status.

Job Description Job Title: Fabricator Welder Job Description We are seeking a skilled Fabricator Welder to join our team and perform flux welding on heavy plates and pipes. This role involves installation and repair, requiring a detail-oriented individual with expertise in welding and fabrication. Responsibilities • Perform flux welding on heavy plates and pipes., • Install and repair structures using welding techniques., • Read and interpret blueprints to ensure accurate installation and repair., • Engage in general labor and construction tasks as needed., • Proficiency in flux core welding and MIG experience., • Experience with blueprint reading and interpretation., • Knowledge of welding and installation processes., • Ability to perform general labor and construction work. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Paramount,CA. Application Deadline This position is anticipated to close on Feb 26, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! ORBITAL TUBE WELDER II/III Based out of Rocket Lab Headquarters in Long Beach, California the Orbital Tube Welder will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines. (Please note: this position can be hired at the Orbital Tube Welder II or Orbital Tube Welder III level) WHAT YOU'LL GET TO DO: • Develop weld schedules for OTW from tubing sizes ranging from 1/4" to 6"., • Perform tube bending, flaring, fit up, and preparation to meet project specifications and industry standards, • Read and interpret blueprints, schematics, and technical drawings to execute tubing projects accurately., • Operate and maintain orbital tube welding equipment (e.g., Orbitalum or AMI systems) to ensure high-quality welds. YOU'LL BRING THESE QUALIFICATIONS AS A ORBITAL TUBE WELDER II: • 2+ years of OTW experience in aviation, aerospace, or similar industry, • Experience working with tubing sizes ranging from 1/4" to 6"., • High school diploma or GED. YOU'LL BRING THESE QUALIFICATIONS AS A ORBITAL TUBE WELDER III: • 5+ years of OTW experience in aviation, aerospace, or similar industry, • Experience with OTW machines or automated fabrication equipment., • Knowledge of NDE (Non-Destructive Examination) processes to inspect and verify the integrity of tubing and welds. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • 8+ years of OTW experience in aviation, aerospace, or similar industry, • Certification in welding or tube fabrication., • Familiarity with industry standards such as ASME or ISO., • Solid understanding of NDE (Non-Destructive Examination) processes ADDITIONAL REQUIREMENTS • Willing to work Monday - Friday (A-shift 6:00am-2:30pm or B-shift 2:00pm-10:30pm), • Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position, • Able to lift up to 25lbs. unassisted, • Must be able to climb ladders and be comfortable working in tight spaces., • Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls., • Must be able to walk or stand for extended periods – 8 hours min, • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25—$40 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Vast is looking for an Orbital Tube Welder, reporting to the Manager of Tube Fabrication, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. Orbital Tube Welder I: $24 - $29 USD. Orbital Tube Welder II: $27 - $34

A cutting-edge aerospace company in California is looking for a skilled welder with at least 3 years of GTAW welding experience.

We are seeking a motivated and experienced, Tungsten Inert Gas (TIG) Welder to join our aerospace manufacturing team. Shift Swing Full-Time/Part-Time Full-Time Location Applied Aerospace & Defense, Long Beach Category Machine Shop Req Number MAC-25-00014 Position Sr

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Enhances field productivity. Consistently perform projects under budget and on time., • Assists Construction Managers and HR in recruiting field workers., • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter Powered by JazzHR 1SIahagXoS

TIG welders certify to AWS D1731 aerospace specification as required to manually weld aviation hardware from 0. We are actively seeking a welder in our weld bay department, reporting to the manager of fabrication and assembly. TIG welders are responsible for the fabrication and welding of aluminum,

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Will be welding small pieces of A/C units together.We are now accepting ONLINE applications.Give us a call after completing the application.

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.