Safety jobs in Los Angeles, CA - Page 19Create job alerts

Job Description Job Location: Buena Park, CA Hours: • Shift A: Monday – Thursday, 4:00 AM – 2:30 PM, • Shift B: Monday – Thursday, 2:30 PM – 1:00 AM Job Description The Production Machine Operator – Fixture & Changeover Specialist is responsible for operating, maintaining, and performing fixture changeovers on specialized production machinery, including IDS systems and printer fixtures. This role requires strong attention to detail, mechanical aptitude, and a focus on safety—especially when handling high-value changeover components. Tasks • Perform fixture changeovers safely and efficiently, ensuring minimal downtime., • Inspect fixtures and tools for wear or damage and report any concerns promptly. Qualifications • High school diploma or equivalent; technical training a plus., • 1–2 years of experience operating production or packaging machinery., • Experience with changeover fixtures and automated machinery preferred., • Familiarity with LOTO procedures and general industrial safety practices., • Ability to read and follow work instructions, technical drawings, and machine manuals., • Strong mechanical aptitude and problem-solving skills., • Ability to lift up to 50 lbs and stand for extended periods., • Manual dexterity to handle tools, fixtures, and machine components., • Comfortable working in a fast-paced production environment., • Timeliness: must be on time or early to be prepared for the shift.

Job Description Mission Driven, Community Focused About | Charles R.Drew University of Medicine and Science (cdrewu.edu) Charles R. Drew University is located in the Watts-Willowbrook area of south Los Angeles and was founded in 1966 in the wake of the Watts uprising. CDU was founded to address inadequate medical care in the region and to provide equitable medical education opportunities for under-represented students. CDU offers the only historically black Doctor of Medicine program west of the Mississippi and is strongly invested in the local and regional community. The university leads multiple partnerships and programs to provide equitable healthcare resources in a variety of south Los Angeles neighborhoods. The Department of Health and Life Sciences at the College of Science and Health (DHLS) seeks to hire a full-time faculty at the rank of assistant professor. The primary responsibility is to conduct research but may be involved in teaching and service. The assistant professor will mentor students in research, provide academic and career advising, and participate in recruitment and retention activities. The assistant professor position reports to the Chair of the DHLS. Job Summary: The Assistant Professor in the Department of Urban Public Health (DUPH) is a full-time faculty member responsible for contributing to the department’s academic, research, and service missions. This role involves teaching and mentoring students, developing innovative public health curricula, and engaging in research that addresses the health needs of urban and historically underserved communities. The faculty member is expected to collaborate with community partners and public health professionals while supporting the growth and excellence of the department’s undergraduate and graduate programs. This position offers the opportunity to make meaningful contributions to improving public health in South Los Angeles and beyond through education, scholarship, and community engagement. Please submit the following with your application to be considered for the open opportunity: • CV, • Cover letter, • Teaching statement, • Writing sample, • Recommendation letters (ideally at a minimum of 3).Essential Duties and Responsibilities:, • Advance DUPH’s mission and strategic goals in education, research, and service with a focus on health equity and social justice., • Develop and deliver undergraduate and/or graduate public health curricula using inclusive, anti-racist, and community-informed pedagogical approaches., • Maintain an active and sustainable research agenda aligned with urban public health, community-based participatory research, or related public health fields., • Mentor and advise students in academic, professional, and research pathways, promoting their success and leadership in public health practice and scholarship., • Participate in curriculum development and accreditation processes for public health degree programs., • Engage in meaningful institutional, professional, and community service, including partnerships with community organizations and public health agencies., • Collaborate with faculty, staff, and administrative leadership to enhance program excellence and equity., • Contribute defined hours of teaching, service, and scholarship in accordance with department and college standards., • Maintain scheduled office hours for student engagement and advisement., • Participate in departmental and university-wide initiatives, committees, and strategic planning activities., • Stay current with public health trends, best practices, and pedagogical innovations. Other Duties and Responsibilities: • Performs other duties as assigned. Qualifications/Requirements: EDUCATION: • A doctoral degree (Ph.D., DrPH, ScD, or equivalent) in public health or a closely related field from a regionally accredited institution is required. EXPERIENCE: • Record of, or potential for, excellence in teaching at the undergraduate and/or graduate level., • Demonstrated commitment to scholarly activity, with a focus on urban health, racial health disparities, or related public health areas., • Evidence of, or strong potential for, community engagement and public health practice in underserved urban communities. KNOWLEDGE/ABILITY/SKILLS: • Commitment to the CDU mission and to advancing health equity through education, research, and service., • Demonstrated understanding of anti-racist, inclusive, and community-based pedagogical approaches., • Strong interpersonal and collaboration skills with faculty, students, and community partners., • Proficiency in Microsoft Office 365 (Outlook, Word, Excel, PowerPoint), learning management systems (e.g., Blackboard or Canvas), and virtual conferencing platforms (e.g., Zoom, MS Teams)., • Ability to manage multiple priorities, adapt to change, and sustain attention to detail while contributing to dynamic team-based and community-focused efforts. PHYSICAL DEMANDS: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Occasional stooping. Frequent standing. Constant walking, sitting, climbing, reaching high/low levels, finger movement, feeling, speaking clearly, hearing conversationally, and seeing far and near. WORK ENVIRONMENT: • Position is on-site unless specific authorization from the manager., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Occasionally required to work in confined space. MENTAL DEMANDS: • The mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Frequent work on a variety of unrelated tasks. Constant calculating interrupted work, work on a variety of interrelated tasks, and use of sustained concentration, reasoning, judgment, resourcefulness, analytical ability, and ingenuity. Special Requirements: • Ability to work effectively with a diverse community. As a health professions institution of higher education, Charles R. Drew University of Medicine and Science seeks to protect the health and safety of the University community. As a condition of enrollment and employment, students, faculty, and staff must comply with the current CDU Covid-19 requirements as described on the CDU Covid-19 webpage. Please visit the CDU Return to Campus website or email the Campus Nursing Office at . Excellent benefits: Medical, dental, vision, retirement plan, vacation accrues on first day of employment, wellness programs, 17 paid holidays per year, up to 16 hours of paid time off to participate in community service and much more. Salary Compensation: $95,000 annual/Exempt EEO Statement: Charles R. Drew University is committed to Equal Employment Opportunity. Applicants will be considered without regard to gender, race, age, color, religion, national origin, sexual orientation, genetic information, marital status, disability or covered veteran status. Fair Chance Statement: Charles R. Drew University of Medicine and Science will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local “Fair Chance” laws.

Job Description Position Title: Punch/Laser Operator Reports to: Production Manager Duration: 4-week project Schedule: Monday-Friday 2pm-10:30pm must be open to working overtime. Description: Employee will operate the laser punch sheet metal, punch and shear machines to produce parts which meet customer specifications and workmanship standards. Responsibilities: · Reviews all documents relating to the job at hand. · Setup and operate punch/laser punch machine with standard tool on basic jobs. · Runs programs per the Program Load Sheet. · Pass internal forklift operator and safety certification program. · Perform setups based on process sheet and setup documentation. · Completes production documents and related paperwork. · Keep all work areas clean and organized. · Store excess material and dispose of scrap. · Daily and weekly maintenance on all machines. · Report any safety or maintenance concerns to management immediately. · Technical support or help another team member, if necessary, under supervision of supervisor. · Commitment to all safety policies and regulations at all times. · Other duties may be assigned. Qualifications: · High school diploma or GED preferred. · Minimum 1 year of experience in operating standard tooling of punch/laser punch machine or other relevant role. · Able to load and unload parallel to all machines with clear instruction and training. · Keen eye for detail. · Positive attitude, reliable, and a team player. · High school diploma, GED or equivalent work experience. · Must maintain confidentiality of work-related information and materials. · Prior sheet metal fabrication experience is preferred. Company DescriptioniStaffing is a leading employment agency dedicated to connecting job seekers with meaningful employment opportunities. With a passion for helping individuals achieve their career goals, we provide personalized and comprehensive job placement services that cater to diverse industries and job types. Our team of experienced recruiters works diligently to understand the unique needs and aspirations of each applicant and matches them with the best-fit positions in reputable organizations across the nation.iStaffing is a leading employment agency dedicated to connecting job seekers with meaningful employment opportunities. With a passion for helping individuals achieve their career goals, we provide personalized and comprehensive job placement services that cater to diverse industries and job types. Our team of experienced recruiters works diligently to understand the unique needs and aspirations of each applicant and matches them with the best-fit positions in reputable organizations across the nation.

Job DescriptionSalary: $24 + Bonus Plan With over 17 years of proven success, Monkey Wrench Plumbing, Heating, Air & Electric is founded upon a commitment to excellence, high standards, and an unwavering dedication to both team and customer satisfaction. Central to our values is our mission: to provide an elevated service experience to our members and their homes. We invest in our people, support their professional growth, and consistently strive to deliver exceptional serviceboth within our organization and to the communities we serve. Were currently seeking a motivated HVAC Service Technician to join our team. As a Service Technician, you will diagnose, service, and maintain residential HVAC systems with attention to detail and care, contributing to high-quality workmanship and exceptional customer satisfaction in a collaborative, team-focused environment. What We Offer: • Stable MondayFriday schedule (7:00 AM to 4:00 PM) with occasional overtime and weekends as needed, • Vibrant company culture with regular events and team celebrations, • Growth and advancement opportunities through ongoing training and career development, • Supportive, team-based environment with caring, engaged leadership, • Comprehensive benefits including health, dental, vision, and life insurance, • 401(k) retirement savings plan, • Paid time off (PTO) for personal time and rest, • Paid training programs to help you grow professionally, • Competitive hourly pay: $24/hourly + Bonus Plan Key Responsibilities: • Install, maintain, and repair residential HVAC systemsincluding furnaces, air conditioners, heat pumps, ductwork, and ventilation systemsin compliance with manufacturer specifications and local building codes., • Review and interpret blueprints, schematics, and technical drawings to determine system layout and installation requirements., • Perform electrical, refrigerant, and gas line connections for HVAC systems, ensuring proper grounding, sealing, and compliance with safety standards., • Conduct system testing using diagnostic tools to identify leaks, measure pressure, and verify performance; adjust settings to optimize functionality and energy efficiency., • Collaborate with internal teams and external trades (e.g., electricians, plumbers, installation coordinators, sales supervisors) to ensure smooth project execution and system integration., • Educate homeowners on system operation, routine maintenance, and energy-saving practices to promote long-term system performance and customer satisfaction., • Accurately document work performed, including materials used, system specifications, and customer interactions, while maintaining clear and professional communication., • Uphold all safety protocols and procedures, including proper use of PPE and safe work practices on every job site., • Maintain a clean, organized, and well-stocked job site and service vehicle to promote efficiency, safety, and professionalism. Qualifications: • Minimum of 2 years of hands-on experience diagnosing, servicing, or maintaining HVAC systems in residential settings., • Working knowledge of HVAC system components, such as compressors, motors, fans, coils, and controls, as well as basic troubleshooting techniques., • Ability to read and interpret service manuals, schematics, and technical documentation with minimal supervision., • Familiarity with safety standards, HVAC codes, and proper handling of refrigerants, electrical systems, and diagnostic tools., • Proficient with basic hand tools and comfortable using diagnostic instruments such as multimeters, leak detectors, and pressure gauges., • Strong communication and customer service skills, with the ability to explain technical information in a clear, professional manner., • Dependable and self-motivated, with a willingness to continue developing skills through on-the-job training and formal education., • Physically able to perform job duties, including lifting heavy equipment, working in attics or crawl spaces, and being on your feet for extended periods., • Valid drivers license with a clean driving record; able to travel to job sites as needed., • EPA Section 608 certification (or willingness to obtain) preferred. Why Join Us? At Monkey Wrench Plumbing, Heating, Air & Electric, our success is driven by the talent and dedication of our team. Were committed to fostering a workplace where every individual feels valued, supported, and empowered to grow. If you're a dispatch professional who thrives on building meaningful connections and making a positive impact, wed love to have you on our team! Equal Opportunity Employer Monkey Wrench Plumbing, Heating, Air & Electric is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, gender, veteran status, disability, or any other protected classification. Pre-employment background check and drug screening are required.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company car, • Company parties, • Competitive salary, • Free uniforms, • Health insurance, • Paid time off, • Profit sharing, • Training & development, • Dental insurance About Temp Kings Air Temp Kings Air is a high-growth residential HVAC company based in Pasadena. Were building a company where quality work is respected, customer experience actually matters, and techs are given the tools and support to succeed. Were not looking for just another wrench. Were looking for a professional someone who wants to be a key player as we grow, take ownership of their craft, and earn what theyre worth. The Role Youll be the face of Temp Kings in the field: servicing, diagnosing, and repairing residential HVAC systems with confidence and care. We run clean, provide top-tier equipment, and do things the right way and we expect the same from our senior techs. This role comes with freedom, real career path opportunities, and performance-based bonuses. If you want to build with us, youll be supported with top-tier training, modern tools, and a culture that actually respects field techs. What Youll Be Doing • Diagnose and repair residential HVAC systems (gas furnaces, heat pumps, condensers, air handlers, ductwork), • Communicate clearly with homeowners and present repair/replace options, • Follow local codes, safety standards, and manufacturer specs, • Use company tools, systems, and processes to document your work, • Support and train junior techs as needed, • Represent the brand with pride and professionalism Requirements • Minimum 24 years of HVAC service experience (residential), • EPA Universal Certification, • Valid drivers license and clean record, • Solid diagnostic and troubleshooting skills, • Ability to work in attics, crawlspaces, and roofs as needed, • Strong communication and customer service skills, • Comfort using apps, tablets, and job management software, • NATE certification or advanced training a plus, • Bilingual (Spanish/English) a plus Why Join Temp Kings • Highly competitive hourly pay + performance bonuses, • Paid training, distributor-backed advanced classes, • Company van, uniforms, and tool account, • Paid time off, holidays, health & dental benefits, • No seasonal layoffs we keep techs working year-round, • Real advancement opportunities as we grow, • Laid-back but professional team culture no drama, no BS, • Youll be respected, heard, and invested in Sound Like You? If you take pride in your work, want to grow with a company thats going places, and are ready to be treated like a pro lets talk. Submit your resume or a short note about your experience and availability. We move fast for the right people.

Job DescriptionDescription: The HVAC Installer will install, repair, and maintain heating, ventilation, and air conditioning (HVAC) systems. Responsibilities: • Ability to install HVAC systems such as rooftop package units, split systems, ductless split systems, humidity control systems, vent hoods and exhaust systems, etc., • Read and understand plans for duct layout, pipe supports, etc., • Travel to job sites as assigned., • Expected to perform repetitive physical tasks that require lifting, pushing, and pulling of material/product and standing throughout each shift., • Must have their basic hand tools and cordless power tools., • Must have a valid California Driver's License and clean driving record. The final candidate will be subject to a Motor Vehicle Report, the ability to successfully pass a drug screening, and a Criminal Background Check before hiring., • Complies with company and industry safety standards., • Performs other related duties as assigned Requirements:, • Excellent problem-solving and analytical skills., • Extensive knowledge of HVAC systems and equipment., • Ability to use power and hand tools., • Ability to use thermometers, pressure gauges, and other testing devices to evaluate HVAC systems., • Ability to read operation and repair manuals for HVAC systems., • Ability to follow instructions., • Excellent mechanical skills., • Excellent communication skills, as required to interact with customers. Education and Experience: • High school diploma or equivalent required., • Vocational/technical school training or apprenticeship required., • Five years of related experience is preferred. Physical Requirements: • Physically able to work on HVAC units., • Will be required to work in settings with extreme cold or extreme heat, depending on the time of year., • Prolonged periods of standing, kneeling, crawling, or climbing ladders., • Must be able to lift 50 pounds at a time. Alliance Industrial Refrigeration is an equal opportunity employer (EOE). Qualified applicants are considered for employment without regard to age, race, religion, gender, sexual orientation, national origin, and disability or veteran status. If you need assistance or an accommodation during the application process because of a disability, it is available upon request (Alliance is pleased to provide such assistance, and no applicant will be penalized as a result of such a request).

Job DescriptionSummary We are seeking a skilled and reliable HVAC Technician with proven experience in both commercial and residential systems, including refrigeration equipment. This position involves installing, servicing, and maintaining HVAC and refrigeration systems in diverse environments. The ideal candidate has strong technical knowledge, a proactive work ethic, and a focus on safety and customer satisfaction. Key Responsibilities * Install, repair, and maintain HVAC and refrigeration systems, including furnaces, AC units, walk-in coolers, freezers, and ventilation equipment * Diagnose and troubleshoot mechanical, electrical, and refrigeration-related issues * Perform routine inspections, preventive maintenance, and tune-ups * Interpret blueprints, wiring diagrams, and technical manuals * Ensure compliance with HVAC/refrigeration codes and safety standards * Document service work, materials used, and job status in service reports * Communicate system issues and solutions clearly to customers * Maintain service vehicle, tools, and equipment * Respond to emergency calls and participate in on-call rotation as needed Qualifications * High school diploma or equivalent (technical school or HVAC certification preferred) * EPA Section 608 Certification required * Refrigeration experience (residential and/or commercial) is a must * Minimum of 3 years of HVAC/refrigeration service and installation experience * Strong understanding of mechanical, electrical, and refrigeration systems * Valid driver’s license with a clean driving record * Excellent diagnostic and customer service skills * Ability to work independently and manage time efficiently * Able to lift 50+ lbs and work in varied environments (rooftops, tight spaces, etc.) Benefits * Competitive pay based on experience * Health, dental, and vision insurance * 401(k) with company match * Paid vacation and holidays * Company-provided vehicle, tools, and equipment * Ongoing training and career development opportunities

Job DescriptionWe’re expanding our California HVAC team. If you're an HVAC technician with high standards, a solid work ethic, and your own reliable truck, we want to meet you. Duties: • Diagnose and repair RTUs and split systems, • Perform filter changes and belt replacements, • Follow dispatch instructions and update job status via app, • Work with safety-first mindsetRequirements:, • 3+ years of commercial HVAC experience, • EPA Certification, • Personal truck and tools, • Solid references from previous employersWhy SeamlessFM:, • Field-first leadership that listens, • Competitive hourly pay + performance bonuses, • Paid time off, training, and weekly pay 3zStIK2eJd

Job DescriptionPosition Summary: Straightening Worker uses a variety of tools and machinery to straighten steel, stainless steel and aluminum castings. Pay Rate: $19.00 - $22.00 per hour Essential Duties and Responsibilities The essential functions include, but are not limited to the following: • Retrieves, stores and maintains calibration status., • Interprets technique for instructions on straightening of castings., • Uses measuring tools and machinery such as calipers, ice tongs, height gauges, Indicators, surface plates, fixtures, hammers/mallets, pin gauges, radius gauges, feeler gauges, press, and high temperature oven., • Verifies calibration status of measurement equipment prior to use., • Verifies router to confirm prior, current and next operation., • Checks in/out work in process operations. Minimum Qualifications (Knowledge, Skills, and Abilities) To perform this job successfully, an individual must be able to perform each essential Duty satisfactorily. The requirements listed are representative of the knowledge, Skill, and/or ability required. Reasonable accommodations may be made to enable Individuals with disabilities to perform the essential functions. Ability to apply common sense understanding to carry out detailed but involved instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions .While performing the duties of this job, the employee is frequently required to stand, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is occasionally required to walk, stoop, kneel or crouch. The employee must frequently lift and/or move up to 35 pounds. Specific abilities required by this job include close vision, depth perception, and ability to adjust focus. In this position employee is required to wear the following Personal Protective Equipment: safety glasses, hearing protection, steel toe shoes. Per task: heat protective gloves, heat protective polarized face shield, heat protective coat, and heat protective sleeves. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles. The noise level in the work environment is usually loud. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job- related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. 2- Day Shift Positions Open- Hours are from 7:00am - 3:30pm Monday through Friday- Overtime Work required depending on department demands

Job Description Recruiting Production Packagers for great local company. This is a great position for an individual with great attention to detail and accuracy. POSITION – Production Packager LOCATION: Wilmington PAY: $18/Hr. HOURS: Mon -Fri 5:00am - 1:30pm, with lots of Overtime Responsibilities • Fill packaging containers and palletize cases, • Operate filling equipment in a safe manner., • Follow written and verbal instructions and company specifications, • Maintain established standards of productivity & quality, • Set up and break down production machinery as needed, • Adhere to all safety procedures including the use of PPE, • Good math, reading, communication, and organizational skills, • Basic computer literacy required, • Lift up to 50 pounds, • Steel toe shoes, • HS diploma or GED, • Work in a chemical manufacturing environmentCompany DescriptionExpress Employment Professionals of Long Beach, California is a leading staffing provider helping job seekers find work with a wide variety of local businesses. Because we're locally owned, we live in and work in this community and have a vested interest in its success. In addition to our staffing services, our team is actively involved with a wide variety of causes and organizations that help strengthen our beautiful city. Our Vision: To help as many people as possible find good jobs by helping as many clients as possible find good people.Express Employment Professionals of Long Beach, California is a leading staffing provider helping job seekers find work with a wide variety of local businesses.\r\n\r\nBecause we're locally owned, we live in and work in this community and have a vested interest in its success. In addition to our staffing services, our team is actively involved with a wide variety of causes and organizations that help strengthen our beautiful city.\r\n\r\nOur Vision:\r\nTo help as many people as possible find good jobs by helping as many clients as possible find good people.

Job Description Jolly Roofing & Contracting Co., Inc. is a nationwide leader in the commercial roofing industry. We specialize in the installation, repair, and maintenance of a variety of roofing systems. With a commitment to excellence and safety, we are looking for skilled and dedicated individuals to join our team as Roofing Service Technicians. Job Overview: We are currently seeking motivated and dependable Commercial Roofing Service Technicians to provide high-quality repair and maintenance services on commercial roofing systems nationwide. The ideal candidate will have experience with EPDM, TPO, PVC, Modified Bitumen, BUR, and metal roof systems. We are also willing to train individuals who are eager to learn and develop their skills. Key Responsibilities: * Diagnose and repair leaks on commercial roofing systems, including EPDM, TPO, PVC, Modified Bitumen, BUR, and metal. * Perform repairs according to industry standards and ensure safety protocols are followed at all times. * Work professionally with onsite contacts and communicate effectively to ensure customer satisfaction. * Travel regularly to job sites; per diem benefits are provided for travel. * Maintain company-provided tools and equipment. * Utilize smartphones and mobile devices for work-related tasks, including accessing job info, printing, emailing, and scanning documents. Requirements: * At least 2 years of commercial roofing experience is preferred. * Ability to travel 100% for job assignments. * At least one professional reference must be provided. * Basic knowledge of smartphones and mobile technology, or willingness to learn how to use mobile devices for tasks such as printing, emailing, and scanning. Benefits: * Medical, dental, and vision insurance * Life insurance * 401(k) with a matching program * Paid time off and holidays * Referral program * Weekly direct deposit * Company truck, tools, and mobile devices provided Training: New hires will undergo a comprehensive two-week training program, where they will travel with experienced technicians to learn the ins and outs of the trade. Travel is required for these training sessions. Company Culture and Values: At Jolly Roofing & Contracting, we pride ourselves on fostering a supportive and collaborative work environment. We value integrity, safety, and excellence in all our projects. Our team is dedicated to continuous improvement and innovation, ensuring high-quality standards and customer satisfaction. We believe in respect, teamwork, and professional growth, and we strive to create a workplace where everyone feels valued and empowered. Equal Opportunity Employer: Jolly Roofing & Contracting is an equal opportunity employer. We do not discriminate based on age, sex, race, color, religion, national origin, disability status, protected veteran status, or any other characteristic protected by law. Job Posted by ApplicantPro

Job Description ob Summary: We are seeking a skilled and detail-oriented Food Manufacturing Compounder with 3–4 years of hands-on experience in food or beverage production. The successful candidate will be responsible for accurately weighing, measuring, mixing, and blending ingredients according to established recipes and formulations, ensuring consistency, safety, and quality in every batch. Key Responsibilities: • Follow detailed batch sheets and formulations to compound food products accurately., • Weigh, measure, and mix raw materials using scales, blenders, and mixing equipment., • Ensure all ingredients meet quality and safety standards before use., • Operate, clean, and maintain compounding equipment and mixing vessels., • Monitor batch progress and adjust processes as needed to maintain consistency., • Record data related to batch production, including lot numbers, weights, and time logs., • Adhere to Good Manufacturing Practices (GMP), food safety protocols, and company SOPs., • Work closely with Quality Assurance and Production teams to ensure finished product quality., • Participate in continuous improvement, safety, and hygiene initiatives., • 3–4 years of experience in a compounding, mixing, or batch processing role within a food, beverage, or nutraceutical manufacturing environment., • Strong understanding of GMP, HACCP, and food safety standards., • Ability to read and interpret production documents, recipes, and safety instructions., • Good mathematical skills for accurate measurement and scaling of ingredients., • Physically capable of lifting up to 50 lbs and standing for extended periods., • Attention to detail, with a focus on product quality and safety., • Strong communication and teamwork skills., • Experience with automated mixing and batching equipment., • Familiarity with ERP or batch tracking systems., • Food Safety or HACCP certification is a plus.Company DescriptioniStaffing is a leading employment agency dedicated to connecting job seekers with meaningful employment opportunities. With a passion for helping individuals achieve their career goals, we provide personalized and comprehensive job placement services that cater to diverse industries and job types. Our team of experienced recruiters works diligently to understand the unique needs and aspirations of each applicant and matches them with the best-fit positions in reputable organizations across the nation.iStaffing is a leading employment agency dedicated to connecting job seekers with meaningful employment opportunities. With a passion for helping individuals achieve their career goals, we provide personalized and comprehensive job placement services that cater to diverse industries and job types. Our team of experienced recruiters works diligently to understand the unique needs and aspirations of each applicant and matches them with the best-fit positions in reputable organizations across the nation.

Job Description Looking for Production line, General labor candidates to join the team!! 1st and 2nd shifts available. Job Summary We are seeking dedicated and skilled Bakery Production Workers to join our dynamic team in a fast-paced manufacturing environment. This role involves working on the assembly line to ensure that production goals are met efficiently and safely. Responsibilities • Operate machinery and equipment in a bakery facility, ensuring proper functionality., • Assemble products according to specifications on the assembly line., • Packing and labeling bread and cakes, • Working in warm temperature environments, • Molding the dough, • Making and applying cake icing, • Ability to lift 25-50 lbs., • Other tasks as needed, • Conduct quality checks on finished products to ensure they meet company standards., • Maintain a clean and organized workspace, following all safety guidelines., • Assist with inventory management, including the movement of materials within the warehouse., • Collaborate with team members to achieve production targets and improve processes., • Ability to work effectively in an assembly line environment, demonstrating attention to detail and efficiency., • Strong communication skills and the ability to work well within a team., • Positive attitude and strong work ethic, • Punctual and reliable Please call 626-968-8080 or come in to apply at 16022 Gale Ave Hacienda Heights, CA 91745 Company DescriptionGreat company looking to hire someone like you!Great company looking to hire someone like you!

Job Description About the Role We are seeking a reliable Temporary Production Assistant to join our production team. This role is essential in supporting labeling, packaging, and inventory operations while ensuring accuracy, safety, and efficiency in daily tasks. The ideal candidate will be detail-oriented, process-driven, and able to work both independently and collaboratively in a fast-paced environment. Essential Tasks * Process orders for labeling and label un-labeled inventory per customer orders. * Print labels required for daily production. * Pack products accurately based on customer specifications. * Manage label inventory and assist with un-labeled cartridge inventory. * Set up, operate, and clean filling machines. * Check cartridges for proper fill level/piston depth using micrometers. * Insert pistons in filled cartridges using manual or semi-automatic tools. * Replenish cartridges, pistons, labels, and boxes. * Perform basic preventative maintenance on equipment. * Maintain warehouse cleanliness and organization. * Perform other duties as assigned by management. Essential Duties & Responsibilities * Maintain a clean, safe work environment in compliance with company policies. * Follow all site safety rules and PPE requirements. * Detect, report, and address unsafe conditions or equipment issues. * Inspect packaged products to ensure compliance with quality standards. * Complete all assignments accurately, thoroughly, and on time. * Support teamwork by maintaining professional relationships with colleagues. * Adapt to changing workloads and contribute to continuous improvement. * Seek opportunities to enhance skills and knowledge relevant to the role. * Train new employees as needed. Required Knowledge & Skills * Strong attention to detail and process focus. * Ability to follow standard work instructions with accuracy. * Manual dexterity for handling small parts and tools. Company DescriptionFor consideration, please apply online at or schedule and appointment by calling 310.923.7580. No fee to find you a job. APPLY: http://www.expresspros.com/torranceca/ ** Impacting people. One job at a time. Express Employment Professionals Torrance is your local resource for your employment search. We offer a variety of positions including Industrial, Manufacturing, Clerical and Administrative. Our positions vary from temporary, long term, and evaluation hire. We look forward to matching you to a position that fits your experience and thank you for your interest in Express Employment Professionals Torrance. Express Employment Professionals * 22805 Hawthorne Blvd. * Torrance, CA 90505 * 310.923.7580 * We will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles Fair Chance Initiative for Hiring OrdinanceFor consideration, please apply online at http://www.expresspros.com/torranceca/ or schedule and appointment by calling 310.923.7580. No fee to find you a job.\r\n**APPLY: \r\nImpacting people. One job at a time.\r\nExpress Employment Professionals Torrance is your local resource for your employment search. We offer a variety of positions including Industrial, Manufacturing, Clerical and Administrative. Our positions vary from temporary, long term, and evaluation hire. We look forward to matching you to a position that fits your experience and thank you for your interest in Express Employment Professionals Torrance. \r\nExpress Employment Professionals * 22805 Hawthorne Blvd. * Torrance, CA 90505 * 310.923.7580 * \r\nWe will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles Fair Chance Initiative for Hiring Ordinance

Job Description A food production machine operator is responsible for: 1. Operating machines to produce dried food products., 2. Setting up, loading, or starting food processing equipment., 3. Controlling flow rate, temperatures, and machinery settings., 4. Weighing, checking, and loading ingredients and packaging material for specific finished goods., 5. Monitoring output and making necessary adjustments during production processes., 6. Performing preventive maintenance and skilled repairs on complex electrical and mechanical production equipment and systems., 7. Follow standards procedures to monitor equipment for performance, safety, and effectiveness., 8. Coordinating with teams across departments and conducting quality assurance inspections. 9 . Operate and maintain machines in a safe and efficient manner 10. Troubleshoot and resolve issues with machines as they arise, 11. Maintain accurate records of production data and machine maintenance, 12. Stay up to date with changes in production technology and techniques

Job Description Job Summary: The University is undergoing rapid growth toward its strategic goal of becoming a comprehensive, midsize, residential, undergraduate-graduate, research-intensive, health professions and science University of excellence. Our ongoing expansion includes a new 60,000 sq. ft. building in the works for our new four-year medical degree program and the development of a new adjoining 13-acre campus expansion for residence halls and other facilities. CDU’s Los Angeles location offers access to big-city amenities, entertainment, and cultural events. CDU is also closely connected to our community through partnerships with local and regional entities such as government organizations, non-profits, healthcare companies, and area hospitals, including the state-of-art medical campus across the street. Our dynamic and diverse institution is growing at a blistering pace and is recruiting for a range of roles across the University. The College of Medicine is accepting applications for its Winter, Spring, Summer and Fall Semesters. • Assistant Professor, • Associate Professor, • Current Curriculum Vitae (as an attachment): CV format template can be found at the following link: CV Template.pdf (cdrewu.edu), • Academic Credentials (as an attachment) – Medical License , Cert/Training, Board(s) Certificate(s) and Fellowships (if any)., • List of 2-3 Evaluators (Provide contact information for evaluators/references during application questions), • Advances the education, research, and clinical missions of the university in collaboration with the Department Chair, staff, and administrative leadership., • Facilitates and supports the training of students. Champions improvements in education of students, residents, or fellows in their assigned department., • Serves as a role model, leads by example, and teaches students, residents, or fellows. Acts as mentor to students, fosters the success of students, encourages academic excellence, engagement, personal growth, and development of students. Assists students to optimize an educational experience. Assists the student's socialization into a disciplinary culture. Provides support to students in managing the rigors of school., • Contributes to curriculum development, teaching and research activities in various and specific disciplines., • Contributes defined hours for teaching load and student engagement within the department., • Maintains office hours for students., • When asked, works with the Department Chair or hospital administration to recruit, hire and retain outstanding, diverse faculty, residents and fellows., • Communicates effectively with Department Chair, faculty, and staff., • Applies knowledge of standard concepts, practices, and procedures. Maintains up-to-date knowledge of current policies, procedures, and regulations., • Demonstrated proficient skill in effectively using a computer and applications such as Microsoft Office 365 (Outlook, Word, Excel and PowerPoint), • Strong interpersonal skills., • Commitment to social justice and values-driven curricula., • Ability to collaborate effectively with administration, staff, peers and full-time and community-based faculty., • Strong verbal/written communication skills., • Knowledge of and commitment to the unique mission of CDU., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • COVID-19 Vaccination: As a health professions institution of higher education, Charles R. Drew University of Medicine and Science seeks to protect the health and safety of the University community. Accordingly, CDU will require COVID-19 vaccinations for all University students, faculty, and staff subject to limited exceptions and exemptions. The University vaccine requirement has been implemented consistent with federal and state law related to medical exemptions for students, faculty, and staff. Requests for disability and religious accommodations from faculty and staff will be evaluated consistent with the law and University policies and procedures., • For full-time positions range of $165,000 - $265,000 based on experience, degree, rank, and role. Fair Chance Statement: Charles R. Drew University of Medicine and Science will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local “Fair Chance” laws.

Job Description Machine Operator- $20 hourly Mixer Operator - $ 20 hourly 2nd & 3rd shift openings Mixer job Description: Helps operate mixing equipment, ingredient scaling equipment, and conducts the loading of ingredients into hoppers and bins, Also handles dough reworks, blenders, and cleaning. Qualifications: 2 years of food production experience desired Food and safety etiquette Proficient Bilingual read/ writing skills, English Spanish desired Microsoft Office proficient Must be enrolled with America's job centers. Hiring costs will be covered for successful candidates Operator job description: Responsible for setting up and changing equipment based on product needs. Must adhere to all food, safety and quality guidelines. Qualifications: 2 years working in a manufacturing environment High school diploma or GED required Moderate degree of physical activity including lifting, standing, working in cold or heat, and noisy areas Company DescriptionManaged Career Solutions, Inc. (MCS) has over 20 years experience providing high quality employment and training and human services to residents of the City and County of Los Angeles. MCS seeks to hire and retain team members who will strive to achieve our vision: To Deliver World-Class Services to Our Customers; and work within the framework of our mission: To provide Quality Employment, Training, and Business Services to our community.Managed Career Solutions, Inc. (MCS) has over 20 years experience providing high quality employment and training and human services to residents of the City and County of Los Angeles. MCS seeks to hire and retain team members who will strive to achieve our vision: To Deliver World-Class Services to Our Customers; and work within the framework of our mission: To provide Quality Employment, Training, and Business Services to our community.

Job Description A leading company in the industry in surface, rotary and abrasive belt grinding is seeking to hire skilled Machine Operators helpers to join our team. The ideal candidates will have experience in operating machinery and ensuring its smooth operation within a manufacturing environment. • 2nd shift - 2:30pm - 11pm, • Monday - Friday, • Pay rate: $20.00, • Operate and maintain machinery in accordance with safety protocols, • Monitor machines during operation to ensure proper functioning, • Must demonstrate mechanical aptitude, math skills and red micrometers, • Troubleshoot issues that may arise during production, • Familiarity with micrometers and precision measuring instruments, • Ability to work in a warehouse setting, • Mechanical aptitude and understanding of basic math principles, • Proficiency in using hand tools, • Exposure to Lean manufacturing practices would be advantageous, • Must count with 1 year of machining experience

Job Description Job Description: Position Overview We are looking for a skilled Manual Surface grinder. You will be responsible for setting up, operating, and maintaining Blanchard Grinding machinery to produce high-quality parts according to specified measurements and tolerances. This role involves monitoring the production process, performing inspections, and ensuring adherence to safety and quality standards. Key Responsibilities • Machine Operation:, • Set up and operate large commercial size Blanchard Grinders, including surface, cylindrical, or centerless grinders., • Adjust machine settings, such as speeds, feeds, and tooling, to achieve the desired results., • Quality Assurance:, • Measure and inspect finished parts using precision tools (e.g., micrometers, calipers, and gauges) to ensure compliance with blueprints and specifications., • Identify and address any quality issues during the grinding process., • Machine Maintenance:, • Perform routine maintenance and cleaning of grinding equipment to ensure optimal performance., • Report any mechanical or technical issues to the maintenance team., • Production Monitoring:, • Read and interpret work orders, blueprints, and technical drawings., • Monitor grinding processes to maintain efficiency and minimize downtime., • Safety Compliance:, • Follow safety protocols and wear appropriate personal protective equipment (PPE)., • Maintain a clean and organized work area to reduce hazards., • Collaboration:, • Work closely with the production team, quality control personnel, and supervisors to meet production goals., • Experience:, • Previous experience as a commercial size Blanchard Grinder operator is Required., • Familiarity with different types of grinders (surface, cylindrical, centerless, etc.)., • Technical Skills:, • Proficiency in reading blueprints and technical specifications., • Strong knowledge of grinding techniques and tool setups., • Ability to use precision measuring instruments., • Physical Requirements:, • Ability to lift heavy materials (up to 50 lbs) and stand for extended periods., • Good hand-eye coordination and manual dexterity., • Other Skills:, • Strong attention to detail and problem-solving skills. Job Type: Full-Time Schedule: Two shifts available 1st Shift 7:00am - 3:30pm & 2nd Shift - 3:30pm - 12:00am (M-F) Salary: $22.00 Benefits: Health Insurance, Vision Insurance, Life Insurance Company DescriptionLocally Owned, Locally Operated. FasTemps was founded in 1997 in Ypsilanti, Michigan by Karl O and Tim H. Clients immediately responded to their sincerity and genuine interest in understanding the needs of their clients. As a result of customer demand, FasTemps now offers the same excellent service across southern Michigan with offices in Jackson, Lansing, and Ypsilanti. In 2001, FasTemps was awarded the prestigious Strategic Supplier contract for staffing at the University of Michigan and the Health System. In 2005, FasTemps began operations in southern California, currently with offices in Upland and Los Angeles. The Outstanding Achievement Award for the Michigan area was given to FasTemps in 2012 by the Small Business Administration. Through their 20-year journey in the world of staffing, Tim and Karl have maintained an uncompromising commitment to the honest, sincere and genuine ideals which propelled their launch into business in 1997.Locally Owned, Locally Operated.\r\n\r\nFasTemps was founded in 1997 in Ypsilanti, Michigan by Karl O and Tim H. Clients immediately responded to their sincerity and genuine interest in understanding the needs of their clients. As a result of customer demand, FasTemps now offers the same excellent service across southern Michigan with offices in Jackson, Lansing, and Ypsilanti. In 2001, FasTemps was awarded the prestigious Strategic Supplier contract for staffing at the University of Michigan and the Health System. In 2005, FasTemps began operations in southern California, currently with offices in Upland and Los Angeles. The Outstanding Achievement Award for the Michigan area was given to FasTemps in 2012 by the Small Business Administration. Through their 20-year journey in the world of staffing, Tim and Karl have maintained an uncompromising commitment to the honest, sincere and genuine ideals which propelled their launch into business in 1997.

Job Description The Machine Operator maintains operations in the production of customer product to be shipped. The Machine Operator will operate production equipment, monitor its operation, inspect the product produced meets requirements, produce retain samples where required, package the product and record work activity on production documentation. The Machine Operator will clean the equipment at the completion of a production order. Essential Functions: • Carry out production, inspection, packaging and machine operation duties, • Effectively monitor production equipment and report issues to Shift Leadman., • Set up machinery and ensure all materials are readily available, • Check parts to meets specifications and report discrepancies to Shift Leadman. ., • Perform secondary operation on the parts as required on setup sheet., • Package and palletize the finished parts as required on the setup sheet., • Blend colorant into raw materials if required on setup sheet., • Fill hopper with raw materials, • Regrind materials and place in labeled box., • Clean up equipment (grinders, saws, cutters, vacuum loaders, etc…) at the end of a job run., • Obtain retain samples as required., • Record quantities produced on the setup sheet., • Perform appropriate duties as assigned by management, • Maintain a safe and clean work space, • Follow established safety rules and regulations Non-Essential Functions: • Retrieve material from the warehouse as needed., • Assist with loading trucks with materials and finished goods., • Use of a forklift to retrieve and move materials and finished goods., • Clean up the extrusion area at the end of the shift.Company DescriptionJ & L Custom Plastic Extrusions, Inc. has provided custom plastic extrusion components to industry since 1976. We manufacture custom thermoplastic extruded profiles, rods and tubes in over 30 engineering, specialty and general purpose plastic materials in any standard or custom colors. We are a growing small independent business with a fast paced work environment. Compensation is dependent on experience.J & L Custom Plastic Extrusions, Inc. has provided custom plastic extrusion components to industry since 1976. We manufacture custom thermoplastic extruded profiles, rods and tubes in over 30 engineering, specialty and general purpose plastic materials in any standard or custom colors. We are a growing small independent business with a fast paced work environment. Compensation is dependent on experience.

Job Description Job Summary: The Machine Operator is responsible for producing quality parts for our customers. Operators will review production schedules and work orders to determine processing sequences, furnace temperatures, shaping specifications and heat cycle requirement for parts to be heat-treated. Essential Functions: • Studies blueprints, manuals, dispatch specifications to determine dimension and tolerances of finished work pieces, sequence of operations and setup requirements, • Locate and retrieve parts with carts or stand up forklift, • Load and unload parts into furnace, with the use of cranes, • Set up furnace loads to correct temperature, working with extreme heat, • Physically move parts to next stage, • Ability to operate presses, cranes and machines, • Learn all aspects of Heat Treat processes, such as quenching, normalizing solutions, first temper, scrapping, final temper, etc, • Conduct hardness testing and inspection work, • In accordance with Company policies, promote safety by working in a safe manner at all times, • Sweep and maintain clean area surrounding machine, • Remove any trash from work area, • Write up completed job ordersCompany DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Job Description Manufacturing Grinder's company at the City of Santa Fe Springs, CA to join the team. Job Title: Belt Grinder Operator 1st shift: 6am-2:30pm 2nd shift: 2:30pm-11pm Pay rate: $22.00 Position Summary: The Belt Grinder Operator plays a critical role in the post-machining finishing process, ensuring aerospace-grade components meet strict surface finish and dimensional requirements. This position involves operating conventional belt grinding equipment to deburr, polish, and finish high-precision metal parts manufactured to tight tolerances. The ideal candidate has experience working in a high-specification environment where quality, traceability, and attention to detail are paramount. Key Responsibilities: • Operate manual belt grinding machines to perform surface finishing, edge deburring, radius blending, and cosmetic polishing on raw materials., • Follow detailed work instructions, engineering drawings, and aerospace specifications (e.g., AS9100 or customer-specific requirements)., • Perform precise hand-finishing tasks on complex geometries and critical surfaces, including tight radii, bores, and edges., • Select proper abrasive belts, wheels, and tools based on material type (e.g., titanium, Inconel, stainless steel, aluminum) and desired surface finish (Ra/RMS)., • Perform in-process inspection using calibrated measuring tools such as micrometers, calipers, height gauges, and surface roughness testers., • Collaborate with quality inspectors, foreman, and production supervisor to ensure part compliance and address surface finish concerns., • Document work performed and ensure all processes are traceable according to aerospace quality standards. Education & Experience: • High school diploma or GED required; technical/vocational training preferred., • 2+ years of experience in a precision machining environment., • Ability to read and interpret blueprints, GD&T, and process sheets., • Strong understanding of surface finish requirements (e.g., Ra values, appearance standards)., • High attention to detail and quality; ability to work with minimal supervision., • Familiarity with AS9100 environments is a strong plus., • Ability to stand, bend, and lift for extended periods; lift up to 50 lbs. safely., • Manual dexterity and fine motor skills for detailed finishing work., • Exposure to grinding dust, noise, and shop environment – PPE required., • Prior experience finishing aerospace components (e.g., turbine blades, housings, brackets, fasteners).

Job Description MPS is urgently looking for an Inventory Associate for the city of Pico Rivera! Pay Rate: $18/hr. to start - Long term - Temp to hire - Job Duties: • Counting inventory manually and weighing inventory items with a scale also, • Writing the counts down on the appropriate form, • General cleaning/housekeeping- sweeping etc, • Some lifting no more than 50 lbs., • Must be able to do math, read, write and speak English, • Adhere to safety protocol. Must be able to pass E-Verify and background check Shift: 7:00am-4:30pm (Some Saturdays) For more information give us a call at (310)935-0880 Office Address: 249 W. Carson St, Carson, CA 90745

Job Description Now Hiring: Acrylic Bath Installer (Los Angeles, CA & Surrounding Areas) Have you installed bathrooms or kitchens for big box stores or national chains? Ready for a new opportunity? We want to hear from you — send us your resume in confidence. About Us We’re one of the fastest-growing bathroom remodeling companies in North America, offering stylish, affordable, and low-maintenance solutions for homeowners, commercial clients, and accessibility customers. Our reputation for quality craftsmanship is unmatched, and we proudly stand behind every product we install. Anahita Ultimate Finishing Co., a leader in acrylic bath systems, is expanding! We’re looking for an Acrylic Bath Installer who can manage and complete high-volume installations year-round. Position Summary As an Installer, you’ll be responsible for the professional, timely, and high-quality installation of our bath products at customer sites. Key Responsibilities * Complete 1-day bathroom remodels using carpentry and construction skills * Follow installation procedures and company standards * Maintain a clean, respectful job site and professional appearance * Educate customers on product care and maintenance * Submit required paperwork and job photos * Keep your installation vehicle stocked and organized Qualifications * High school diploma or GED * 2+ years of carpentry, construction, or remodeling experience * Skilled with measuring tools (tape measure, level, square) * Valid driver’s license with a clean driving record * Able to use power tools (drill, jigsaw, etc.) * Basic plumbing experience preferred * Physically capable of lifting up to 100 lbs * Able to read and follow safety rules, instructions, and manuals * Trailer for tools and supplies is a plus, but not required Bonus Skills (Not Required, But a Plus) * Carpentry * Tile installation * Flooring * Light plumbing * General home remodeling Ready to Apply? To get started, send us: * Your contact info (name, phone, email, address) * Your work history and relevant skills * A brief description of your most recent project — or just send your resume 📞 Call us at (310) 480-0009 Join a company that values quality, professionalism, and skilled craftsmanship. Powered by JazzHR EM3xshn1Qn

Job Description Grinder's Manufacturing company at the City of Santa Fe Springs is seeking a qualified candidates to join the team. Job Title: Band Saw Operator – Machine Shop Location: Santa Fe Springs, CA Pay rate: $22.00 Shift: 1st Shift (6:00am-2:30pm) Job Summary: We are seeking a skilled and reliable Band Saw Operator to join our machine shop team. The ideal candidate will be responsible for accurately cutting metal stock and raw materials to size using horizontal and/or vertical band saws. This role is essential to supporting machining and fabrication operations by ensuring precise material preparation in a safe and efficient manner. Key Responsibilities: • Set up and operate band saws to cut metal materials including steel, aluminum, and other alloys., • Read and interpret job travelers, blueprints, cut lists, and mechanical drawings to determine cutting requirements., • Measure and mark materials using calipers, micrometers, tape measures, or other precision tools., • Select proper blades based on material type and thickness., • Monitor saw performance and adjust feed rates, blade tension, and cutting angles as needed., • Perform routine machine checks and basic preventative maintenance (blade changes, lubrication, cleaning)., • Ensure cut parts meet dimensional tolerances and quality standards., • Identify and report material defects or equipment malfunctions., • Maintain an organized work area and comply with all safety standards and PPE requirements., • High school diploma or GED required; trade school or vocational training a plus., • Minimum 1 year experience operating band saws or other cutting equipment in a machine shop environment., • Familiarity with common metals and alloys used in machining., • Ability to read and interpret mechanical drawings and work instructions., • Strong attention to detail and ability to work independently., • Comfortable lifting up to 50 lbs and working on your feet for extended periods., • Fast-paced machine shop environment with exposure to metal shavings, oil, and moderate noise. Please submit resume for review

Job DescriptionSummary We are seeking a skilled and reliable HVAC Technician with proven experience in both commercial and residential systems, including refrigeration equipment. This position involves installing, servicing, and maintaining HVAC and refrigeration systems in diverse environments. The ideal candidate has strong technical knowledge, a proactive work ethic, and a focus on safety and customer satisfaction. Key Responsibilities * Install, repair, and maintain HVAC and refrigeration systems, including furnaces, AC units, walk-in coolers, freezers, and ventilation equipment * Diagnose and troubleshoot mechanical, electrical, and refrigeration-related issues * Perform routine inspections, preventive maintenance, and tune-ups * Interpret blueprints, wiring diagrams, and technical manuals * Ensure compliance with HVAC/refrigeration codes and safety standards * Document service work, materials used, and job status in service reports * Communicate system issues and solutions clearly to customers * Maintain service vehicle, tools, and equipment * Respond to emergency calls and participate in on-call rotation as needed Qualifications * High school diploma or equivalent (technical school or HVAC certification preferred) * EPA Section 608 Certification required * Refrigeration experience (residential and/or commercial) is a must * Minimum of 3 years of HVAC/refrigeration service and installation experience * Strong understanding of mechanical, electrical, and refrigeration systems * Valid driver’s license with a clean driving record * Excellent diagnostic and customer service skills * Ability to work independently and manage time efficiently * Able to lift 50+ lbs and work in varied environments (rooftops, tight spaces, etc.) Benefits * Competitive pay based on experience * Health, dental, and vision insurance * 401(k) with company match * Paid vacation and holidays * Company-provided vehicle, tools, and equipment * Ongoing training and career development opportunities

Job DescriptionDescription: Absolute Airflow is a 5 star rated company with over 2,000 reviews! At Absolute Airflow and Plumbing, we pride ourselves on our commitment to excellence and customer satisfaction. DUTIES AND RESPONSIBILITIES: · Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes. · Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers. · Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves. · Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory. · Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines. · Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels. · Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion. · Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment. · Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps. · Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary. · Maintain related records concerning time, labor and materials; maintain log of · tasks performed and write reports as required. · Perform other duties as assigned. · Maintain regular attendance. KNOWLEDGE OF: · Standard practices of the HVAC and refrigeration trade. · Theory of HVAC and refrigeration systems. · Materials, methods and tools used in the operation and repair of HVAC and · refrigeration systems. · Applicable building codes, ordinances and regulations of State and local · authorities pertaining to HVAC, refrigeration and boilers. · Air compressors and pneumatic controls. · Cooling tower and boiler water treatment. · Manual and electrical tools and equipment applicable to the HVAC and · refrigeration trade. · Welding and soldering techniques. · Health and safety regulations. · Basic record-keeping techniques. · Proper methods of storing equipment, materials and supplies. Requirements: ABILITY TO: · Perform skilled mechanical maintenance duties in the inspection, repair, · installation and alteration of District heating, ventilation, air conditioning and · refrigeration systems and related equipment and facilities. · Calibrate systems. · Perform preventive maintenance and routine servicing of equipment. · Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration, · and air-conditioning units. · Follow oral and written instructions. · Operate specialized machinery, equipment and tools utilized in the repair, · installation and maintenance of heating, ventilation, air conditioning and · refrigeration systems. · Communicate effectively both orally and in writing. · Understand and follow oral and written directions. · Work cooperatively with others. · Work independently with little direction. · Meet schedules and time lines. · Maintain routine records and prepare reports. · Routinely lift objects weighing up to 75 pounds. · Lift heavy objects. PHYSICAL DEMANDS: · Work is performed while standing, sitting, and/or crouching for full shift. · Requires the ability to communicate effectively using speech, vision and hearing. · Requires the use of hands for simple grasping and fine manipulations. · Requires bending, squatting, crawling, climbing, reaching. · Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds. · Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day. · Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.

Job Description Must have current residency in the greater San Bernardino area for site visits to existing buildings and hands on project work in the area. Are you a seasoned professional with a passion for customer service, quality, and safety? Join our team as a Commercial Service Technician/ Helper! We are seeking an experienced, highly motivated Commercial Roofing Service Technician/ Helper to join our dynamic team. As a key member of a two-person team, you play a crucial role in supporting roof repair operations by assisting the Lead Technician and performing essential tasks. This role involves technical expertise, hands-on work, and customer interaction to maintain high-quality service delivery while ensuring safety and efficiency. Why Join Us? • Competitive Pay: Hourly: $25-$27/hr. (based on knowledge and experience), • Paid Time Off: After 90 days, • Career Growth: Opportunities for professional development and advancement., • Commitment to Safety & Quality: Join a company that prioritizes safety, client satisfaction, and quality service. Key Responsibilities:Roof Repair Support: • Assist the Service Foreman in identifying and repairing roof deficiencies, including leak issues, and contribute to resolving small-scope tasks as required., • Perform heat welding of membranes and handle detailed work on pipes, curbs, walls, and cricket/taper layouts according to manufacturer specifications., • Maintain professional communication with customers during service delivery, address concerns promptly, and ensure overall satisfaction with the service provided. Inventory and Equipment Management: • Manage daily inventory, ensuring accurate reporting and replenishing materials as needed., • Maintain company vehicles, ensuring they are properly stocked, cleaned, and ready for transport to job sites., • Report any vehicle or equipment issues to supervisors in a timely manner.Safety Compliance:, • Follow safety guidelines and ensure compliance with OSHA standards, roofing manufacturer requirements, and job site safety procedures.Job Site Management:, • Ensure job sites are prepared, loaded, and cleaned before and after work. Maintain organization and efficiency in all tasks to minimize delays and uphold a safe working environment.Travel:, • Drive to and from job sites, ensuring timely arrival while prioritizing safety. Job Requirements: * License and Driving: Valid, clean driver’s license with the ability to drive for extended periods and navigate varying traffic conditions. * Experience: • Experience in the construction or roofing industry is preferred but not required., • Proficiency in using hand and power tools. Technical Knowledge: Strong understanding of safety management and roofing manufacturer specifications. * Certifications: Willingness to obtain required OSHA certifications and other relevant training as needed. * Flexibility: Ability to work outside of regular hours and on weekends as required by job demands. If you're a detail-oriented, safety-conscious professional with strong leadership skills, we encourage you to apply and join our team of dedicated experts! To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Nations Roof provides equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information, or any other protected characteristic. Our company is a Drug Free Workplace. No Recruiters. All candidates must be authorized to work in the U.S.

Job Description We're Hiring: Kitchen Manager Ggiata Delicatessen – Los Angeles, CA $29/hr + Benefits (Health, Vision, Dental, Shift Meal, Employee Discounts & More!) About Us Ggiata is a New Jersey-style Italian deli bringing big, bold sandwiches, fresh salads, and house-made desserts to LA. Everything we serve is made in-house — from sauces and dressings to biscuits and cookies. With five locations (and more on the way), we’re growing fast and looking for passionate team members who want to grow with us. The Role: Kitchen Manager As Kitchen Manager, you'll lead the back of house to deliver delicious, safe, high-quality food with top-notch presentation. You’ll be responsible for keeping the kitchen clean and efficient, training the team, and hitting food and labor goals — all while maintaining a positive, solutions-focused environment. Requirements (Must-Haves) • Fluent in English and Spanish (verbal & written), • Previous kitchen management experience in a fast-paced setting, • Able to stand/walk/move for 10+ hours and lift 40 lbs, • Comfortable working 40+ hours per week, • Strong conflict resolution and team leadership skills, • Able to follow and communicate recipes clearly, • Basic math skills (addition, subtraction, etc.), • Tech-savvy: POS systems, spreadsheets, apps, etc., • Culinary school or trade education, • 3-5+ years in high-volume quick service or fast casual kitchens, • Management-level food safety certification Before applying, we invite you to visit one of our locations to get a feel for our vibe and food. Learn more at . By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description Without the strength of our Quality team, we would not be able to offer the industry-leading service we’re known for. We’re seeking an experienced Press Break Operator Professional. The ideal candidate will have proven industry experience as a Press Break Operator. As a strong communicator and skilled hands-on Press Break Operator, you will adhere to procedures and policies in support of the Quality Policy and Customer satisfaction. Support fabrication personnel by performing general fabrication duties to meet or exceed the company’s quality standards. Efficiently manage time, equipment and resources in order to support first time quality and on time delivery. The Press Brake Helper must be able to explain the respective role within the QMS and how their role contributes to quality. The Press Brake Helper shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. The Press Brake Helper shall also be aware of ethical behavior and conduct themselves accordingly to Karman’s policies and procedures. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California, 1 location in Mukilteo, Washington and 1 location in Wilsonville, Oregon. DUTIES/RESPONSIBILITIES: • Maintain and Realize AS 9100 procedures and continuous improvement efforts., • Maintain a clean and organized work environment., • Assist fabrication by pulling the required materials and setting up equipment., • Prepare material for press brake operation., • Perform general clean up., • Report to Management improvements and recommendations that effect quality and / or on time delivery., • Must understand how customer products are impacted in the event of failure., • Any other duties as assigned. KNOWLEDGE AND SKILL REQUIREMENTS: • Must be detail oriented, organized, and be able to interact with Management and staff., • Must be able to use hand tools, • Must be able to lift 25 lbs., • Must have direct communication with internal customers., • Must be trained of applicable changes & customer requirements., • Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: • High school graduate or equivalent in work experience., • Entry level position. PHYSICAL REQUIREMENTS: • Constant standing/walking/sitting for at least 8 hours., • Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs., • Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment., • Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement., • Prolonged periods of repetitive movement are required., • Constant holding, grasping, turning, or otherwise working with the hand(s)., • Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: • This position operates in a warehouse/shop/manufacturing environment. TRAVEL REQUIREMENTS: Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description Machine Operator Position at Florence Filter Florence Filter is seeking a dedicated Machine Operator to join our team. We are looking for individuals with experience in machinery operation and a commitment to quality. Job Title: Machine Operator Compensation: Hourly $20-$25 Operational Hours: 7:00am-4:30pm Reports to: Operations Manager Responsibilities: • Set up and operate machinery according to specifications & safety standards., • Start & stop machines., • Monitor operations & adjust settings as needed., • Inspect parts & products during or after production to ensure they meet quality standards., • Perform basic maintenance., • Identify mechanical issues & report malfunctions or perform minor repairs., • Load raw materials or parts into machines., • Unload finished products and move them to the next production stage., • Log production data (output, downtime, defects, etc.)., • Report issues or inconsistencies to management or maintenance personnel., • Perform trial runs., • Adjust machine settings for optimal performance (speed, temp, and pressure)., • 3-5 years of experience in Machinery, Machine Maintenance., • Skills: Machine Operation, Quality Control.

Job Description Description: An established foreign food manufacturer has expanded its business to the United States and is currently looking for a Machine Operator to join the production team. The incumbent will be responsible for operating specific designated production equipment in the assigned areas adhering to the facility Quality Management System Policies, including GMPs, SSOPs, HACCP program, safety protocols, etc, to ensure product quantity and quality. Responsibilities: • Be familiar with all the processes and procedures for operating the machines in the assigned areas, • Conduct product tests in the beginning of the production or after each changeover to ensure that the product quality meets the company standards, • Be able to conduct minor adjustments of the equipment Notify the production management of equipment malfunction or breakdown immediately, • Fill out different production forms to track the production results as required Notify the production management for any inaccuracies in the machines, • Equip yourself with all required PPE when performing the job, • Participate in health and safety training and monthly meetings to avoid violations of food cross contamination and workplace safety Address any questions and concerns on SOPs, food safety, and employee safety with the supervisor for prompt resolution High school diploma or GED equivalent preferred Minimum 2 year of experience in a fast-paced food manufacturing environment, machine operating experience required Ability to work in a diverse team environment Ability to do basic mathematical calculations Ability to read, write and communicate in English Ability to work 1st shift, any consecutive from 4:30 am - 3:00 pm, depending on assigned areas Must be flexible to work overtime and weekends as needed Physical requirement including frequent lifting up to 25 lbs., occasional lifting to 50 lbs., and infrequent lifting up to 100 lbs; For instances when employee is required to lift more than 50 lbs and 100 lbs they must work in teams of two or use the proper equipment and tools for the job/task at hand. Ability to walk and stand for at least 2 hours or more at one time; exposure to loud noise, dust, chemicals, etc. Language: Mandarin/English Company DescriptionOneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry. OneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively. Our loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow. We understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.OneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry.\r\n\r\nOneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively.\r\n\r\nOur loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow.\r\n\r\nWe understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.

Job Description POSITION: Screen Printer Express Employment Professionals LAX/ Hawthorne is seeking a Screen Printer for a company near LAX. For consideration, please call Express LAX/Hawthorne at or email your resume to . Hours: 2rd shifts available Pay Rate: $18+/hour Job Description for Screen Printer Position: • Set up jobs on the computer to print and adjust screens for accurate registration, • Mix inks and prepare materials, including screens, adhesives, and digital prints, • Start up and shut down printing presses, including cleaning ink, screens, and parts, • Perform quality checks, troubleshoot printing issues, and maintain production pace, • Execute preventative maintenance and ensure optimal operation of presses, • Transport and reclaim screens, ensuring proper cleaning and storage, • 1 year of experience in screen printing, screen making, and reclaiming preferred, • Previous experience with automatic or semi-automatic screen-printing machines (M&R, Tas, Sakurai) is a plus, • Mechanical aptitude for troubleshooting and maintaining equipment, • Excellent attention to detail and ability to distinguish colors accurately, • Strong organizational and time management skills, • Ability to work independently and collaboratively in a team environment, • Good verbal and written communication skills, • Ability to stand, walk, bend, kneel, stoop, crouch, and twist throughout the shift, • Capable of lifting to 40 lbs, • Comfortable working in moderate to loud environments with moving mechanical parts

Job Description • Set up, operate, and tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material., • Read work orders or production schedules to determine specifications., • Set up, test, and adjust machines according to product specifications, using gauges and hand tools., • Load workpieces into machines., • Position, align, and secure workpieces against fixtures or stops on machine beds or on dies., • Start machines, monitor their operations, and record operational data., • Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers., • Examine completed workpieces for defects and sort defective pieces according to types of flaws., • Maintain, clean, and lubricate machines., • Comply with all OSHA and company safety rules, • The company reserves the right to add or change duties at any time

Job Description We are an aerospace/space manufacturing company located in Fullerton, CA looking for a CNC 3 axis Mill Machinist. This position will be responsible for setting-up, adjusting and operating a variety of CNC machines with little to no supervision, maintaining quality and safety standards; keeping records; maintaining equipment and supplies • · 1-3 years experience with CNC mills a plus, • · Haas and Fanuc control experience a plus, • · Able to read customer blueprints, • · Able to set up jobs independently, • · Experience with Aerospace industry a plus, • · Have own tools, • · Able to lift 40-50 pounds, • Willing to train if no experience, • Daily and Saturday overtime available Our company is AS9100 certified and works mostly with aerospace. We offer competitive wages and medical benefits as well as 401(k), paid vacations, holidays and sick time. Rate of pay will depend on experience. To conform to US Government space technology export regulations, applicants must be a US citizen or lawful permanent resident of the US (green card holder) (per ITAR 22 CFR part 120-130) Company DescriptionAerospace Manufacturer in Orange County, CaliforniaAerospace Manufacturer in Orange County, California

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: • Prepare clinical practice staff and inform them of the role student will have in the practice., • Orient students at the onset of the rotation with the practice/site policies and procedures., • Provide ongoing and timely feedback regarding clinical performance, knowledge base, and critical thinking skills., • Supervise, demonstrate, teach, and observe clinical activities to aid in the development of clinical skills and ensure proper patient care., • Delegate to the student increasing levels of responsibility for clinical assessment and management as appropriate to the student’s experience and expertise, • Participate in the evaluation of clinical skills and medical knowledge base through the following mechanisms:, • Direct supervision, observation, and teaching in the clinical setting, • Direct evaluation of presentations (including both oral and written), • Assignment of outside readings, research, and/or projects to promote further learning, • Dialogue with faculty during site visits as applicable to evaluate student progress and assist the learning process., • Audit and co-sign charts to evaluate the student’s ability to write appropriate and complete progress notes, histories, physical examinations, assessments, and treatment plans., • Complete and promptly return evaluation forms provided by the program reflecting on student knowledge, skills, and professionalism, as well as their improvement throughout the rotation., • Complete the midpoint and final evaluation with the student to provide transparent feedback regarding their strengths and weaknesses., • Review and sign the student SOAP note., • Provide the student a written schedule with a minimum of 36 weekly hours., • Use the course syllabus, the PAEA exam topics, and the Blueprint for guide students on their rotation and EOR exam., • Demonstrate cultural competency through interactions with patients., • Maintenance of a professional relationship with the PA student, adhering to appropriate professional boundaries., • Provide students with the necessary support in case of emergency, and communication with the PA program., • Other duties, as assigned. EDUCATION: • PA, MD, DO, or NP from a regionally accredited institution., • Strong interpersonal skills., • Commitment to social justice and values-driven curricula., • Ability to collaborate effectively with administration, staff, peers, and full-time and community-based faculty., • Strong verbal/written communication skills., • Knowledge of and commitment to the unique mission of CDU., • Part Time COMPLEXITY: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Position is on-site unless specific authorization from the manager., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • COVID-19 Vaccination: As a health professions institution of higher education, Charles R. Drew University of Medicine and Science seeks to protect the health and safety of the University community. Accordingly, CDU will require COVID-19 vaccinations for all University students, faculty, and staff subject to limited exceptions and exemptions. The University vaccine requirement has been implemented consistent with federal and state law related to medical exemptions for students, faculty, and staff. Requests for disability and religious accommodations from faculty and staff will be evaluated consistent with the law and University policies and procedures. Fair Chance Statement: Charles R. Drew University of Medicine and Science will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local “Fair Chance” laws.

Job Description About us Samson Pharmaceuticals Inc. is an FDA-registered manufacturer of OTC eye drops, nasal sprays, cosmetics, and supplements. We operate ISO-classified cleanrooms (ISO 8 ’ 7 ’ 6 ’ 5) and follow strict cGMP and aseptic practices. Compensation schedule Multiple shifts are available, compensation, benefits is based on experience, shift time, both are negotiated What you’ll do • Start up and shut down an inline/monoblock eyedrop line (bottle feed fill, tip/inner plug insertion, cap place/torque)., • Perform line clearance pre-op checks (materials, torque/test tools, filter integrity status if applicable, utilities, sensors, interlocks)., • Set up bowls/chutes/escapements, nozzles, starwheels, rails, torque heads; execute format changeovers., • Troubleshoot minor mechanical, pneumatic, and sensor/HMI issues to minimize downtime; escalate as needed., • Execute in-process controls: fill-weight/volume checks, tip/cap presence torque checks, leak/visual inspection., • Follow cGMP, GDP, and aseptic/ISO-5 gowning procedures; maintain housekeeping and support environmental monitoring activities (surface/air plates as directed by QA/QC)., • Complete batch records, logs, and line clearance forms accurately and on time; report deviations/OOS immediately., • Collaborate with QA/QC/Maintenance to meet plan, quality, and safety targets. Must-have qualifications • 2+ years operating equipment inside ISO 5 (or equivalent aseptic environment) in pharma/OTC/medical device., • Proven experience starting, setting up, and running a filling/capping line; strong mechanical aptitude., • Knowledge of cGMP, Good Documentation Practices, and basic operation., • Able to gown for ISO 5 (no makeup/jewelry; facial hair per policy), stand for long periods, and lift up to 40 lb., • Strong attention to detail, basic math for line checks, and clear written/verbal communication., • Work authorization in the U.S.; reliable commute to Commerce, CA. Nice to have • Ophthalmic (fill, tip + cap) experience; torque testing; leak testing., • Filter integrity (bubble point) familiarity; autoclave/SIP/CIP basics., • PLC basics, pneumatics, or mechatronics troubleshooting., • Quality/Microbiology, EM coursework or experience., • Experience with Odoo/MES/ERP data entry., • Bilingual (English/Spanish). Why join Samson • Stable, growing LA manufacturer with modern cleanrooms., • Hands-on role with real impact on quality and throughput., • Ongoing training and advancement opportunities. How to apply Apply on Indeed with your resume. Please highlight specific machines you’ve run (e.g., ophthalmic fillers, tip/cap monoblocks, spindle/rotary cappers, vibratory bowl feeders) and your ISO-5 experience. Screening questions 1. How many years have you worked inside ISO 5 or aseptic cleanrooms?, 2. Describe a line you’ve started up and set up end-to-end (includefill, tip/cap steps)., 3. What in-process checks did you perform (fill volume, torque, leak, vision, etc.)?, 4. Are you able to gown for ISO-5 and comply with no-jewelry/no-makeup policies?, 5. Are you comfortable lifting 40 lb and standing most of the shift?, 6. Are you legally authorized to work in the U.S.?, 7. What shifts are you available for, and can you work OT/weekends if needed?, 8. (Optional) Experience with PLC basics/pneumatics? With Odoo/ERP? EEO statement Samson Pharmaceuticals Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description SUMMARY The Solid Dose Mechanic/Operator I is responsible for maintenance, repair, set-up, cleaning and, in some cases, operation of all granulation, compressing, encapsulation, softgel and coating equipment. Reports to and works under the direct supervision of the Manufacturing Supervisor (Solid Dose). Complies with the Company policies and Standard Operating Procedures, observes current Good Manufacturing Practices (cGMPs) and observes safety rules and regulations. ESSENTIAL RESPONSIBILITIES • Performs equipment repairs, set-up, cleaning and maintenance of granulation, tablet presses, encapsulation, softgel, coating machines and all related support equipment, • Operates machines, as needed, during the manufacturing process, • Keeps the work area cGMP compliant at all times, • Adheres to company policies and procedures and sets a positive example to others within the organization, • Assists other departments as requested and approved by the department supervisor QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily using the skills and abilities outlined in this job description. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Discretion in handling confidential and sensitive matters, • Must have good knowledge of Company SOPs and cGMP guidelines, • Must be able to operate, maintain, repair, set-up and clean equipment used in at least one area of the Solid Dose manufacturing process, • Must have good interpersonal skills, • Capable of handling fast paced production environment, • High school diploma or equivalent education, • 2+ years related manufacturing experience is preferred, • Must be able to operate equipment, tools and measuring devices used in solid dose manufacturing REASONING ABILITY The Solid Dose Mechanic/Operator must be able to analyze and interpret data relating to various projects and report issues and problems that arise. The Solid Dose Mechanic/Operator must be able to: • Exercise appropriate judgment to escalate issues to the Supervisor or senior management, • Focus on work assignments to ensure goals and timelines are met, • Work will be conducted in a standard manufacturing environment with associated distractions such as noise from telephones, keyboards, talking, paging systems, machinery and equipment., • Temperatures are regulated by facilities management and are not within the direct control of the individual. Temperatures in the warehouse and production areas may be extremely hot or cold., • Must be able to see close up while handling small parts and tools. Must be able to hear and distinguish between sounds such as warning bells., • Most work is done while standing or walking, while operating, assembling, dismantling, repairing or testing machinery and equipment and requires the incumbent to reach above shoulder height or below knees, bend, stoop, squat, kneel and crawl to retrieve or inspect items at ground or floor level; open and close cabinets or drawers; push and pull, use manufacturing equipment and machinery throughout the workday, • Requires the ability to walk and or stand for up to eight hours per day, move throughout the facilities including warehouse and production areas, office areas and conference rooms, in the same building or another building., • Some work is done while sitting down, using a computer keyboard and gazing at a computer monitor; or completing paperwork., • Must be able to sit for up to two hours per day, stand or walk for up to eight hours per day; climb up and down ladders without assistance; lift and carry up to 20 lbs. with or without assistance,., • Must be able to wear a full or half-mask respirator while working with fine powders or chemicals as required by Material Data Safety Sheets., • Exposure to chemicals used in the manufacturing process of nutritional supplements, cosmetics, and prescription drugs is expected. Additionally, the incumbent may be exposed to standard chemicals used in an office environment including but not limited to toner, glue and liquid paper or white out., • The incumbent may be required to walk or drive to a second location a short distance away.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Territory Manager to join our family. As a Territory Manager, you will be responsible for servicing and managing relationships with customers. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. Compensation:from $41,600 annual salary, dependent on experience and skills plus a base commission structure plan! What’s in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: • Provide consistent and timely service to customers in your territory., • Service 10-15 customers per day in a company vehicle., • Accommodate a customer’s needs with products that will help provide a safe, pleasant, and productive workplace., • Organize and implement a “work plan” for maximizing daily sales and decreasing mileage between calls., • Maintain an adequate supply of promotional materials, flyers, and business cards., • Maintain a call average that is consistent with current company objectives., • Maintain and turn in paperwork in a timely manner., • Mail or email work orders, call reports, and vehicle maintenance reports as required., • Keep handheld computer data updated and in compliance with company policy., • Keep abreast of all price changes and sell accordingly., • Maintain a consistent paper flow by avoiding errors on paperwork submitted., • Maintain adequate vehicle stock and rotate accordingly., • Adhere to the company vehicle maintenance schedule and policy., • Understand and comply with all company policies., • Have proper tools and supplies such as; anchors screws, screwdriver(s) Hammer and a charged drill on van in order to install equipment within a customer’s facility., • Maintain a clean company vehicle inside and out to promote a good company image., • Manage your geographical territory and notify management of any territory problems., • Promote growth by continuously making cold calls and developing new businesses., • Keep up to date about competitive companies, their products and prices, • Continuously gain knowledge of First Aid + Safety products., • Share pertinent information about pricing and products with other employees during sales meetings. Qualifications What we’re looking for: • Must be at least 21 years or older., • Valid non-commercial driver’s license and safe driving record is required., • 1-3 years of B2B sales experience or equivalent is preferred., • Must be knowledgeable in basic computer and tablet skills and be proficient with Microsoft Word and Excel., • Ability to lift and carry up to 40 lbs. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Job Description Line Cook Job Summary: We are seeking a skilled and motivated Line Cook to join our team in a fast-paced, open kitchen environment. As a key member of the culinary team, you will be responsible for preparing high-quality dishes, maintaining cleanliness and organization of your assigned station. The ideal candidate thrives under pressure, values presentation and consistency, and is comfortable working in an open kitchen environment. Key Responsibilities: • Prepares, cooks, and plates menu items according to Mother Wolf specifications and standards., • Adheres to all Health and Safety Regulations., • Sets up and breaks down assigned station., • Assists with control of inventory and supplies., • Promotes a safe and respectful work environment., • Completes tasks assigned by management in a timely efficient manner., • Communicates all kitchen related needs to management., • Assists other stations when needed., • A minimum of 2 years’ experience working in a high-volume, professional kitchen is required., • Must have flexible availability, including weekends, holidays, and early/late hours as needed., • Must have the ability to report to work on time and when scheduled., • Experience working with fresh pasta is preferred, • Experience working with wood burning ovens is a plus., • Must be able to stand and exert well-paced mobility for up to 8 hours in length., • Must be able to exert well-paced ability to maneuver between functions occurring simultaneously., • Must have the ability to bend, squat and lift 50 lbs. on a regular basis., • Must be able to bend, twist, stoop, squat, and stretch to fulfill tasks.

Job DescriptionCompany Description Multifamily Property Management Job Description The Maintenance Technician is responsible for the upkeep and maintenance of apartment homes, buildings, and grounds, and performs highly diversified duties to include but not limited to: repairing flooring, drywall, and appliances; troubleshooting and repairing plumbing, electrical, safety and security systems (lighting, locks, smoke/CO2 alarms, etc.), and HVAC systems; painting (interior and exterior); and cleaning (sweeping, mopping, garden/yard upkeep, etc.). The Maintenance Technician is responsible for conducting all job duties in accordance with company policy and all safety protocols, and supports the overall objective of meeting the expectations of the Client, based on the respective operating capital budget and management agreement. • Property Name: Lucia Apartments, • 9128 Burke St, Pico Rivera, CA 90660, USA, • Full-Time, • Unit Count: 141, • Reliable transportation to and from work, possibly including off-site training locations, is required to fulfill job duties. Pay: $19 - $21 / Hour DUTIES AND RESPONSIBLITITES 1.Client Relations • Adhere to the assigned maintenance program to ensure the most economical, proper and safe condition of the property, • Follow the preventative maintenance program as outlined in the Maintenance Manual., • Ensure grounds, curbs, and property aesthetics are in compliance with the FPI Curb Appeal Policies., • Perform maintenance inspections and repairs on vacant apartments to ensure proper operating conditions and appearance upon move-in., • Coordinate and/or assist in painting vacant apartments., • Change out appliances-install and remove as necessary., • Ensure timely completion of all unit turnovers according to FPI guidelines or based on the established scope of work for the property location. 5. General Maintenance Equipment and Systems • Repair and maintain any equipment owned by the apartment community including proper storage in a secure Location Maintain all maintenance shops and storage rooms in an orderly fashion and in compliance with safety regulations, • Properly secure all parts, supplies, and property equipment, • Maintain, within the budgetary limits, an inventory of parts to make necessary repairs, • Wear required uniform, if provided, and name badge during work hours. Refer to FPI Dress Code policy, • Consistently and fairly enforce community rules and regulations Standard Operating Procedures, • Comply with all Fair Housing Laws, • Promote a professional image by adhering to FPI Management's Dress Code Policy, • Conduct displayed must be of a professional manner when communicating with employees, residents, prospective residents, clients, vendors, and guests while representing FPI Management. Qualifications Minimum Requirements: • Minimum 1 year of experience in a similar role, preferably within Residential Property Management. Experience in hotel maintenance, facilities maintenance, or construction will also be considered., • High School diploma or equivalency certificate required; technical school and/or CAMT certification, preferred., • Must be able to wear a respirator, and have the ability to be medically fit for duty and cleared to wear a respirator, and comply with FPI's facial hair policy., • Must be proficient in speaking, reading, and writing in English., • Basic computer skills (email, internet, etc.)., • Rehab/Renovation, • Pool Maintenance, • Plumbing Repair, • Painting (Int & Ext), • Landscape/Grounds, • HVAC Maintenance, • Electrical Repair, • Drywall Installation/Repair, • Carpentry, • Boiler Systems, • Appliance Repair, • Complete Apt Turns, • Google Drive, • Google Mail (GMail), • Internet Use, • Basic Computer, • Customer Service Additional Information ESSENTIAL ATTRIBUTES • Embracing and exemplifying our HEART core values and incorporating them into every task performed and every interaction with clients, supervisors, team members, colleagues, residents, vendors, etc. EEO/EVerify Statements FPI Management is an Equal Opportunity Employer. All qualified applicants are encouraged to apply. FPI Management participates in the E-Verify program.

Job Description The UT Level II NDE Technician will provide in-house Aerospace (UT) shop work as detailed below: Pay range of $25 to $28 MAJOR RESPONSIBILITIES/ACTIVITIES: NDT Method (UT) • Set up and calibrate equipment., • Conduct tests independently using appropriate UT NDT technique(s)., • Interpret, evaluate, and document inspection results., • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I personnel., • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the employer., • Work with minimal supervision., • Identify and resolve problems in a timely manner., • Obtain and analyze information skillfully., • Edit and present numerical data effectively. NDT Method Techniques (UT): • Contact experience on Aerospace hardware is a plus., • Immersion experience with manual inspection systems is a plus., • Immersion experience with automated C-scan systems for inspection of GE, Honeywell, Rolls Royce, Pratt & Whitney, and other Aerospace Prime Contractors hardware, is HIGHLY desirable., • Experience with Automated UT inspection systems is a plus. MINIMUM REQUIREMENTS: • High School graduate or equivalent required., • Graduate of a specialized NDT technical program meeting SNT-TC1A, and/or NAS-410 in UT is required., • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate Aerospace experience hours to become certified as a Level II per SNT-TC1A or NAS-410 standards is required. #LI-GF1 MISTRAS strives to provide a positive work environment that values excellence in safety and quality, free from discrimination and harassment. Every MISTRAS employee plays a part in our Company’s success and making this a great place to work. We are committed to a work place where all employees are free to raise issues, concerns and questions for the improvement of our operations and work environment. Safety is the overriding priority in everything we do; all duties critical to safety, quality, and environmental protection are carried out in compliance with all requirements and with personal accountability. Note to Applicants: Smoking is prohibited in all indoor areas of the Company unless designated smoking areas have been established by a particular location in accordance with applicable state and local law. Note to Rhode Island Applicants: The company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the states worker's compensation law. Initial ( if applicable) Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial ( if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Equal Opportunity Employer/Veterans/Disabled: An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job Description Position Summary We are seeking a skilled and reliable Maintenance Mechanic to support ongoing maintenance, repair, and equipment improvement efforts within our manufacturing facility. This role involves troubleshooting, repairing, rebuilding, and installing a wide variety of machines and systems, with an emphasis on safety, efficiency, and precision. Key Responsibilities * Perform repairs, installations, rebuilds, and overhauls of machinery and mechanical systems. * Work with machine operators and other trades to troubleshoot and resolve equipment issues. * Read and interpret mechanical drawings, blueprints, and technical manuals; create sketches for custom components when needed. * Operate machine tools, welding equipment, and plumbing systems to fabricate or repair components. * Diagnose problems with motors, gearboxes, presses, and other industrial equipment. * Maintain an organized and clean work area while adhering to all safety protocols. * Document maintenance activities and report equipment conditions as required. * Support production operations by ensuring machines remain operational and efficient. * Perform additional maintenance-related tasks as assigned. Tools & Equipment Used * Manual and power hand tools * Machine shop tools and instruments * Welding equipment (gas and electric) * Plumbing and pipefitting tools * Diagnostic and measuring instruments Working Conditions & Physical Demands * Must be able to stand, walk, bend, kneel, twist, and crawl for extended periods (minimum 8 hours/day) * Ability to lift and carry up to 100 lbs. with team assistance * Must work in a dynamic industrial environment and occasionally in confined or elevated spaces Qualifications * Minimum of 4 years of hands-on experience in a maintenance mechanic role * Prior experience in an industrial or manufacturing environment is strongly preferred * Solid skills in troubleshooting mechanical systems including motors and gearboxes * Familiarity with using power tools, presses, and other heavy equipment * Welding experience is a plus * Technical certifications are a plus but not required * Must provide a personal basic tool kit (annual tool allowance provided)

Job Description Working with a leading and stable pharmaceutical company seeking a skilledLine Mechanic. The ideal candidate will have experience with fillers/bottling systems in a manufacturing environment. This direct-hire position offers competitive pay and excellent benefits. For your consideration, please apply today! Position pays $33 to $38 Shifts availability: 1pm to 9:30pm 5pm to 1:30am 1am to 9:30am Qualifications: • Minimum of 5 years of experience in the cosmetics, food, or pharmaceutical industry., • Extensive experience with fillers and bottling systems., • Strong focus on maintenance management, problem prevention, and continuous improvement., • Experience with pneumatics, hydraulics, gearboxes, conveyor belts, motors. Responsibilities: • Perform daily set-ups, adjustments, and maintenance of bottle packaging machinery., • Handle quality changeovers, set-ups, adjustments, repairs, and preventative maintenance for all packaging machinery.., • Assist with Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) for new machines and tooling., • Continuously review machine safety features to ensure optimal performance. Benefits 401k, health benefits, vision, dental, holiday, sick time and vacation time paid. #LI-SM3

Job Description Eastridge Workforce Solutions is seeking a Equipment Maintenance Mechanic for our client in Lynwood, CA. This is an opportunity to work with a well-established company in the health and wellness industry offering a stable environment and room for growth. • Location: Lynwood, CA, • Pay: $30-$36/hr, • Shifts Available: 2nd Shift (5:00 PM – 1:30 AM), 3rd Shift (9:00 PM – 5:30 AM)Why Join Us?, • Weekly Pay – Get paid fast!, • Full-time positions with long-term potential, • Growth opportunities – We promote from within, • Benefits package – Medical, dental, vision & 401(k) optionsWhat You’ll Do:, • Set up, troubleshoot, and maintain bottling and packaging equipment, • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic systems, • Read and interpret schematics and technical manuals, • Perform preventative maintenance and document all repairs, • Support installation and qualification of new machineryWhat We’re Looking For:, • 5+ years of experience in packaging or production maintenance, • Strong troubleshooting skills with AC/DC drives and pump systems, • Familiarity with bottling, fillers, and related equipment preferred, • Knowledge of cGMP and safety protocols Benefits: Use this link bit.ly/4cGUQSh to learn more about benefits available to Eastridge’s temporary employees.From time to time Eastridge’s clients may offer additional benefits to Eastridge employees while on assignment.Information about those benefits will be communicated when applicable. Eastridge Workforce Solutions is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We celebrate diversity and are committed to creating an inclusive environment for all employees. Please note that Eastridge is unable to provide visa sponsorship to applicants. Certain clients require Eastridge to perform background checks and Eastridge will consider qualified applicants with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. #ICOMPLUS #LI-SM3

Job DescriptionThank You for your interest in Anza Management; we are looking for a full-time floater Maintenance Technician. Job Summary: The Maintenance Technician performs basic apartment and related facilities maintenance in order to preserve the quality and value of the apartment property. Supplements maintenance, landscape, and management efforts to meet company standards and attract residents. Maintenance Technician Requirements: • Days/Hours will vary based on property location and weekend availability is needed, • This is a floater position and will be covering several properties where needed, within the same mile radius, • Minimum 1 year of experience in a similar role preferred, • Valid California Driver’s License, • Will be subject to a Background/Physical/Drug Screen, • Must be eligible to work in the United States What we offer: • 100% Employer paid medical benefits, • 10 Vacation Days, 10 Sick Days, 8 Paid Holidays, and up to floating two days off, • Training Available, • State-funded Retirement Program ( Cal Savers), • Room for career growth, • Generous Referral Program Maintenance Tech Responsibilities: • Knowledge of installations and repairs in plumbing and electrical issues, • Respond to maintenance requests of plumbing, electrical, heating, and general repairs in an apartment setting, • Handle repair work on walls, floors, doors, and woodwork, • Paint interior of apartment buildings and respond to safety issues, • Document repairs and performed duties, • Handle maintenance and troubleshooting of mechanical processes, • Alert appropriate authorities of any malfunctions in the building, • Respond to emergency situations in a prompt manner Why Anza Management? Become part of a diverse and growing organization that has been in business for more than 40 years, despite being scattered across multiple locations we are still able to instill a sense of purpose and belonging among the Anza team. We attribute our growth and success to the high-quality service each member of the Anza team provides to both our residents and property owners. We take great pride in being the first firm headquartered in Orange County to be designated an Accredited Management Organization (AMO) by the Institute of Real Estate Management. Anza Management is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status, or any other protected status in accordance with all applicable federal, state, and local laws Anza Management considers for employment qualified applicants with criminal histories in a manner consistent with the requirements of EEOC/FEHC/ADA Laws and the Fair Chance Initiative for Hiring (Ban the Box) Ordinance. Anza Management abides by all applicable federal, state, and local employment laws, including EEOC/FEHC laws. Nothing in this job posting guarantees employment.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Los Angeles, CA. Most positions are first shift with a pay scale of up to $35/hour based on experience & skill level. If you are a Roofer and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope to Include any or all of the following for Commercial and/or Residential Projects: • Removing Old Roofing Materials, • Installing New Roofing, • Repairing Roofing and any Damages, • Installing Insulation and Membrane, • Bitumen, TPO, EPD, PVC, Metal, Asphalt, Single Ply, and/or EPDM Roofing, • Working on Flat and/or Pitched Roofs, • 2+ Years of Experience in the Field, • Basic Tools for the Trade, • Proper PPE must be worn, • OSHA 10 Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. First Student is now hiring a Shop Foreman - Lead Diesel Mechanic for our shop serving San Fernando surrounding School Districts! First things First: Who are we? Twice the size of our next largest competitor, First Student is the leading school transportation solutions provider in North America. Every day, we complete 5 million student journeys, moving more passengers than all U.S. airlines combined. With a team of highly trained drivers and the industry's strongest safety record, First Student delivers reliable, quality services to 1,100 school districts. Why join First as a Shop Foreman / Lead Diesel Mechanic? • Per Union contract, wage is set at $41.72 per hour, • An additional $0.25 per hour for each ASE certification you possess or obtain, • Company-paid ASE testing and training materials, • Monday-Friday, 8-hour shift, full-time shift schedule and consistent, year-round work, • Tremendous career advancement opportunities, • Benefits including medical, dental, vision, & 401(k), • Paid holidays & vacation, • Annual allowances for boots and prescription safety glasses, • State-of-the-art training programs, • Discounts on cell phone plans, cars, and more through the Perk Spot program! About the Shop Foreman / Lead Diesel Mechanic Position As a Lead Fleet Technician / Shop Foreman at First Student, you'll schedule and perform school bus fleet maintenance, diagnose and troubleshoot complex problems, and maintain service records. Other job duties will include: • Supervise technicians in the shop., • Generate work orders and track progress through completion., • Maintain advanced knowledge of all vehicle components to effectively diagnose and perform maintenance and repairs., • Monitor shop operational performance and efficiency and take action to improve as needed. Lead Fleet Technician / Shop Foreman Qualifications • Valid driver's license required; Willingness to obtain CDL while employed - We train!, • At least 5 years of automotive or diesel maintenance & repair experience or technical school education., • Previous experience in a lead technician, supervisor, or other management role is preferred., • Possess a mechanic's tool set., • Willingness to participate in ASE certification program. Training, testing, and bonuses provided!, • Subject to DOT drug as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. Get your career on the road with First Student! In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .