Trabajos senior process engineer en Buffalo, New YorkCrear alertas

Job Description Allient Inc. is in growth mode and currently seeking a Staff Systems Engineer to join our team at our corporate innovation center and headquarters located in Buffalo, New York! The Systems Staff Engineer leads system-level engineering for customer applications, working closely with leadership, sales, engineering teams, suppliers, and customers. This role supports major multi-site projects built around Allient’s core technologies: Motion, Control, Power, and Lightweighting. Apply now! Responsibilities: • Lead complex system design & analysis across electrical, mechanical, software, actuation, and composite technologies., • Define system architecture from customer requirements and applicable standards., • Manage requirements, including subsystem definitions, derived requirements, tolerances, and traceability., • Use modeling and simulation to verify performance, reliability, safety, and risk mitigation., • Create and manage test plans, procedures, fixtures, and tooling globally., • Perform subsystem testing and support integration into customer vehicles or applications., • Evaluate new and modified product designs to ensure performance meets specifications., • Present technical information to support strategic, multi-site planning., • Review and critique design work from others and promote best practices., • Collaborate directly with customers and internal teams on requirements, project updates, and test results., • Contribute to standard process and procedure development., • Mentor engineers at various levels., • Serve as a technology expert and help guide innovation for products and processes., • Support proposals, including technical definitions, diagrams, and compliance documentation., • Operate with a high degree of independence; only major deliverables require senior review., • Work across multiple projects and locations simultaneously., • Some limited travel may be required (20% typical), • Other duties as needed. Minimum Qualifications: • Bachelor’s degree in electrical, mechanical, or aerospace engineering + 11 years’ experience, or Master’s degree + 9 years’ experience., • Experience with actuation systems (motors, gearing, ball screws, electronics, software)., • Extensive experience using MATLAB and Simscape for dynamic, thermal, and power-flow analysis., • Knowledge of composites/lightweighting preferred., • Experience with military/defense programs or government contracting preferred., • Strong ability to interpret and develop technical instructions, diagrams, and abstract concepts., • Proven technical expertise in one or more engineering disciplines. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit www.Allient.com Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Senior Process Engineer: Buffalo, NY area You will be doing engineering activities on complex capital equipment projects, ensuring technical compliance with customer User Requirements Specifications (URS). Prepare Functional Specifications (FS) in accordance with contract documents; act as process owner for P&IDs to ensure equipment performance meets URS. Coordinate engineering activities to support project deliverables, including planning and tracking all engineering submittals. Work with Engineering Supervisors to define and plan project engineering tasks; serve as a key engineering representative on assigned projects. Communicate and coordinate engineering deliverables across all project team members. Approve engineering documents including P&IDs, GAs, FRS, HDS, block diagrams, P&ID/electrical schematic cross-checks, FV, EV, P&IDV, and safety sections of manual sets. Chair internal design reviews in accordance with the Project & Quality Plan (PQP). Control the Interface Control Document (ICD) to ensure proper integration with loading systems. Prepare traceability matrices for GAMP compliance. Interface with customers to resolve design-related technical issues for freeze dryers; manage control and release of proprietary information. Prepare test protocols per URS and lead resolution of process-related issues during testing to ensure equipment performance requirements are met. Identify scope creep and support the Project Manager in analyzing cost and schedule impacts. Support departmental projects, standards development, and best-practice initiatives. Provide input to Engineering Supervisors for evaluation of department staff performance. Consistently observe and promote SHEQ requirements (safety, health, environmental, & quality) for self, department personnel, contractors, visitors, and guests. This role is designated as Senior Process Engineer and requires extensive experience with freeze-drying equipment in the pharmaceutical industry. SKILLS AND EXPERIENCE BS degree required, with minimum 6 years of related experience specifically on pharmaceutical freeze-drying machinery. Strong organizational skills and ability to independently plan and manage workload. Experience in technical liaison and communication with internal departments, vendors, and customers (written and verbal). Computer skills adequate to support engineering responsibilities. Strong understanding of lyophilization processes and freeze-dryer manufacturing. Background check and drug test are required Targeted salary range, $100k to $115k It is the policy of GCR to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. GCR is an Equal Opportunity/Affirmative Action Employer and embraces diversity in our employee population. Skills • Design Review, • Pharmaceutics, • Process Engineer, • Vendor Management, • Project Management, • Compliance, • Project Engineering, • Technical, • Dryers, • Contracting, • Capital Equipment, • Submittals It is the policy of GCR to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. GCR is an Equal Opportunity/Affirmative Action Employer and embraces diversity in our employee population. \nCompany Description GCR Professional Services is an engineering and information technology staffing firm (direct-hire, consultants, contract-to-hire). GCR Professional Services is an engineering and information technology staffing firm (direct-hire, consultants, contract-to-hire).

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI is seeking a Senior Electrical Engineer to lead the electrical design and technical execution of modular infrastructure projects. This role owns electrical system architecture from concept through production while providing technical leadership across engineering, manufacturing, testing, and product development. May require up to 10% travel Key Responsibilities Electrical System Design • Lead the design of electrical systems supporting modular infrastructure and industrial power systems, • Develop electrical architectures, single-line diagrams, electrical schematics, wiring diagrams, panel layouts, and cable schedules, • Integrate generators, switchgear, transformers, batteries, UPS systems, PLCs, instrumentation, protection devices, and monitoring systems, • Coordinate electrical designs with mechanical engineering, manufacturing, controls, and project teams Engineering Analysis & Documentation • Perform and review electrical calculations supporting power distribution, equipment sizing, protection, grounding, and system performance, • Develop production-ready electrical documentation supporting manufacturing, testing, and integration, • Support compliance with applicable electrical codes, standards, UL requirements, and customer specifications, • Lead engineering design reviews and provide technical guidance to engineers and designers Technical Leadership & Manufacturing Support • Support prototype builds, Factory Acceptance Testing (FAT), commissioning, and troubleshooting, • Lead root cause investigations and corrective actions for electrical system issues, • Work with manufacturing teams to improve product quality and manufacturability, • Drive engineering standards, documentation quality, and continuous improvement initiativesRequirements Required Qualifications Bachelor's degree in Electrical Engineering 8+ years of electrical engineering experience Experience designing industrial electrical systems or power infrastructure Experience developing electrical schematics and production documentation Experience performing electrical calculations supporting industrial power systems Experience leading technical engineering activities across cross-functional teams Preferred Qualifications Experience supporting Battery Energy Storage Systems (BESS), Generator Systems, Modular Data Centers, industrial skids, or similar infrastructure Experience with switchgear, generators, UPS systems, transformers, protection systems, PLCs, or industrial controls Familiarity with NEC, UL, IEEE, NFPA, or related industry standards Experience supporting New Product Introduction (NPI) Professional Engineer (PE) license preferred Benefits & PerksGTI Fabrication offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position overview GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle Key Responsibilities • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Mentor technicians and junior engineers in best practices for manufacturing engineering. Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Excellent communication and interpersonal abilities. Preferred Qualifications: • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • Experience with CFD/FEA simulation tools. Working Conditions: • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require up to 5 % travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Build iconic structures that shape skylines. At Enclos Tensile Structures, we design, engineer, fabricate, and install custom tensile structures that define skylines and transform public spaces - from stadiums to transportation hubs and beyond. Our work blends architectural vision with advanced structural engineering to bring lightweight, high-performance structures to life. We're seeking an Associate Engineer to join our Buffalo-based engineering team. This is an exciting opportunity for an early-career civil structural engineer who is ready to apply their technical foundation to complex, creative, and highly visible projects. Enclos Tensile Structures is an award-winning design-build contractor specializing in the engineering and construction of custom lightweight structures. Our team has collaborated with many of the world's leading architects, designers, and developers to deliver projects that combine architectural expression with structural performance. Our portfolio spans everything from elegant, functional canopies to some of the most iconic tensile structures in the built environment. Notable projects include: • Allianz Field, • SoFi Stadium, • Intuit Dome, • ATLNext Central Passenger Terminal Complex, • Santa Fe Opera House and Cantina POSITION OVERVIEW The Associate Engineer works under the supervision of senior level engineers to assist in the development and engineering of custom tensile structures. Primary responsibilities include computer modeling and finite element analysis using proprietary large deflection software to size steel and cable components, as well as connection design, while meeting the structural requirements of the industry building codes and the specified requirements of the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES • Modeling and analysis of tensioned membrane structures using finite element large deflection software., • Summarize and present engineering results in report format for client review and approval., • Working with a project designer to develop general arrangement drawings for client review and approval., • Create fabric cutting patterns meeting the geometry requirements of the project., • Coordinate project work in conjunction with the Project Manager, Supervising Engineer, and Project Designer to ensure timely and accurate completion of the assigned project., • Responsible for personal task management and adherence to deadlines and scope., • Strong demonstrated ability to analyze and design steel fabricated structures., • Demonstrating the ability to learn and grow under the supervision of a senior level Engineer. COMPETENCIES To achieve success, candidates should demonstrate the following core competencies: Attention to detail, organizational skills, problem-solving, interpersonal skills, written and verbal communication, teamwork, professionalism, quality orientation, dependability, initiative, and collaboration/relationship management. REQUIREMENTS • 0-3 years of relevant engineering experience., • Engineer-in-Training (E.I.T.) Certificate, • Bachelor of Science (BS) degree in Civil or Structural Engineering, • Excellent verbal and written communication skills., • Strong theoretical background with specific knowledge relating to designing steel structures., • Proficiency in standard office software, such as Microsoft Word, Excel, Outlook, and Bluebeam. COMPENSATION At the Enclos family of companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Associate Engineer position in Buffalo, New York can expect to earn $65,000 to $75,000 annually. Benefits include, and are not limited to: • 401(k) plan with company match, • Medical, dental, prescription, vision coverage, • Tax-advantaged accounts for healthcare expenses, • Flexible time off and paid holidays, • Paid parental leave, • Career growth and nationwide career opportunities Equal Opportunity Employer Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law. Job Posted by ApplicantPro

Job Description Summary The Senior Rotating Equipment Engineer serves as a technical authority for engine‑driven rotating equipment packages— including gas/diesel engines driving compressors, pumps, and generators. The role supports specification, design, vendor review, testing, troubleshooting, and lifecycle engineering for packaged rotating machinery used in industrial and energy applications. Key Responsibilities Design & Technical Leadership • Lead selection, specification, and evaluation of engine‑driven equipment packages., • Develop/review datasheets, specifications, requisitions, and vendor documentation., • Review performance curves, vibration analyses, design calculations, and engine ratings., • Ensure compliance with API-614, ISO, ASME, and OEM standards., • Support controls narratives, control system checks, and test procedure development. Maintenance, Reliability & Troubleshooting • Support alignment, mounting, foundations, and skid design., • Develop maintenance strategies, conduct failure analyses, and support reliability programs., • Diagnose and resolve rotating equipment issues to minimize downtime. Procurement • Write detailed equipment specifications and purchase orders., • Evaluate vendor proposals and verify equipment readiness for testing. Testing & Commissioning • Oversee testing and commissioning activities to ensure performance spec is met., • Create/maintain testing work instructions and ITPs., • Coordinate with Production, QC, and Test teams to ensure test readiness., • Analyze test records for compliance and performance. Safety & Compliance • Ensure safe design, installation, and operation of all rotating equipment., • Recommend safety and testing improvements and enforce OSHA/company rules. Leadership & Collaboration • Mentor junior engineers and work cross‑functionally with mechanical, electrical, process, and production teams., • Lead customer communication during testing and support quotation activities. Technology & Continuous Improvement • Stay current with rotating equipment technology and identify efficiency or cost‑saving improvements. Skills & Knowledge • Strong customer communication and multi‑tasking abilities., • Ability to troubleshoot, test, and service technical equipment., • Familiarity with API, ASME, NEC/IEC/CSA codes and rotating equipment (compressors, pumps, gears, motors, expanders, generators)., • Hands‑on approach and ability to work independently., • Strong documentation and organizational skills. Qualifications • Bachelor’s degree in Mechanical Engineering or related field., • 8–15+ years of rotating equipment engineering experience., • Experience with gas/diesel engines, compressors, pumps, generators, and skid‑mounted systems., • Understanding of rotor dynamics, vibration, lubrication, sealing, and alignment., • Experience working with major OEMs and package vendors. Additional Requirements • Travel for meetings, commissioning, and field service., • Prepare detailed field service reports and maintain site‑visit logs., • Perform other duties as assigned.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Skills/Education/Experience • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook., • Preferred experience in; AutoCAD, and/or Revit. Estimated Compensation Range and Benefits $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription: ABOUT US Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled most of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson’s BIM (Building Information Modeling) Designer III serves as a senior expert, utilizing cutting-edge BIM software and methodologies to oversee electrical design, coordination, and execution in highly complex commercial and industrial construction projects. This role entails leading cross-functional teams, including architects, engineers, project managers, and subcontractors, to produce sophisticated 3D models, anticipate and resolve intricate clashes, and ensure optimal integration of electrical systems. The BIM Designer III will spearhead initiatives to maximize project efficiency, drive significant cost savings, and eliminate on-site errors through innovative digital modeling strategies, while providing mentorship, strategic guidance, and championing the organization's core values across the team. RESPONSIBILITIES • Lead comprehensive model setup tasks, including developing custom templates, standards, and workflows for large-scale projects., • Design, implement, and refine advanced tags, annotations, and parametric families to support dynamic model functionality and automation., • Expert-level mastery of Revit families, encompassing custom creation, advanced editing, and seamless integration in multifaceted Revit ecosystems., • Independently create and refine detailed 1-line and 3-line drawings, incorporating regulatory compliance, engineer input, and innovative design solutions., • Oversee complex Revit circuiting, panelboard schedules, and sophisticated scheduling tools, provide guidance to engineers and ensure accuracy., • Direct equipment layout/clearances, integrating submittal reviews, code adherence, and multi-disciplinary coordination to optimize system performance., • Spearhead modeling of intricate conduit and cable tray pathways, hangers/support systems, sleeves/penetrations, MEP coordination, section drawings, (3D) drawings, underground coordination, and lighting layouts with strategic oversight., • Perform advanced clash detection, resolution, and federated model management using Navisworks, while leading coordination meetings and BIM forums., • Mentor BIM Designer I and II team members, conducting training on advanced techniques, software optimization, and best practices., • Develop and enforce BIM execution plans, company-wide standards, and continuous process improvements to elevate team performance., • Incorporate and advocate for renewable energy systems, sustainable design practices, and emerging technologies into project models., • Analyze model data for insights on project metrics, risk assessment, and value engineering opportunities. ABOUT YOUR QUALIFICATIONS Education and Experience: • Minimum of 6+ years of experience in BIM modeling, with extensive expertise in electrical contracting or MEP (Mechanical, Electrical, Plumbing) sector for large-scale commercial and industrial projects., • Bachelor's Degree in Electrical Engineering, Construction Management, Architecture, or a related field is required; Master's degree or advanced certifications are preferred., • Advanced certifications (e.g., Autodesk Certified Professional in Revit, Navisworks, BIM Management, or equivalent) are essential., • Expert proficiency in BIM software including Revit MEP, Navisworks, BIM 360/ACC, and advanced tools like Bluebeam, Dynamo, or similar for automation and model validation. Technical Skills: • Advanced proficiency with Microsoft Office Suite (Word, Excel, Outlook) for in-depth documentation, reporting, data analysis, and presentations., • Expert proficiency in drawing software (e.g., Revit and AutoCAD), including scripting, automation, and plugin development., • Mastery of 3D modeling, visualization, rendering, and virtual reality integration techniques., • Expert data management and interoperability (e.g., IFC file formats, API integrations, and data exchange protocols)., • In-depth knowledge of electrical systems design, National Electrical Code (NEC), and advanced commercial construction practices., • Proficiency in interpreting, modifying, and creating construction drawings, specifications, and submittals., • Strong experience with renewable energy systems, sustainable design practices, and LEED/BREEAM standards. Soft Skills: • Exceptional problem-solving skills and ability to manage multiple complex tasks simultaneously., • Proven leadership and mentorship abilities to guide junior staff and contribute to team development., • Excellent communication and interpersonal skills to collaborate with clients, contractors, and internal teams, including presenting model insights., • Solid organizational and time management skills to prioritize tasks, meet deadlines, and handle project timelines., • Flexibility to adapt to adjusted work schedules, including overtime or evening/weekend hours, to meet project demands., • Openness to constructive feedback and commitment to continuous improvement in job performance., • Readiness to learn and master advanced BIM tasks, software updates, and emerging technologies., • Willingness to learn and develop skills in various BIM tasks, software, and equipment. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage. Requirements: ABOUT YOUR QUALIFICATIONS A bachelor's degree in electrical drafting, drafting design, electrical engineering, or similar preferred. A minimum of two years' experience as an electrical drafter. American Design Drafting Association (ADDA) certification is preferred. Proficiency with CAD software, such as AutoCAD, Revit, and SolidWorks. Excellent understanding of a range of electrical generation and transmission systems. Thorough knowledge of electrical safety regulations, building codes, and health standards. Strong critical thinking and problem-solving skills. Strong interpersonal and managerial skills. The ability to stay up to date with the latest developments in electrical systems and best practices. Strong communication skills and collaborative abilities. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.\n \n Job Title:\n \nAdvanced Manufacturing Engineer\n \n Reporting To:\n \nDirector, AG Advanced Mfg Engng\n \n Work Schedule:\n \nOnsite - Buffalo, NY\n \n \nMoog's Military Aircraft Group is in search of an Advanced Manufacturing Engineer to join their team! As an Advanced Manufacturing Engineer, you'll play a critical role in transitioning operations into our next-generation Advanced Integrated Manufacturing (AIM) facility. If you're passionate about precision, thrive in a collaborative environment, and love solving complex challenges, this is your opportunity to make a real impact.\n \n \nReporting to the Director of Advanced Manufacturing Engineering or delegate, and embedded within the Advanced Manufacturing Engineering Team, the individual will research, develop, test and implement a variety of Advanced Manufacturing technologies to improve or optimize current production needs or develop new products within the Military Aircraft Group.\n \n \nThe successful candidate will work under supervision of Senior Engineers on a team of project, mechanical, electrical, robotics, controls, and software engineers and collaborate and work projects across other engineering and operations teams.\n \n \nThis role offers a first shift, on-site schedule at our East Aurora NY location.\n \n As an Advanced Manufacturing Engineer, you will:\n \n\n • Assist in identification, develop, test and implement appropriate Advanced Manufacturing technologies for application in Military Aircraft Group products and production processes.\n, • Support continued manufacturing improvement activities involving Advanced Manufacturing technologies resulting in productivity optimization via throughput increase, product quality, or process variation reduction.\n, • Collaborate with Senior Engineers and Project Management to plan, develop, and report out on Advanced Manufacturing projects from early to late stages of maturity to production implementation.\n, • Interact and interface with Moog employees from other departments, disciplines, sites and divisions to understand business needs and opportunities for Advanced Manufacturing technologies.\n, • Become intimately and fundamentally knowledgeable of Moog's products, designs, and customers' needs to identify and prioritize Advanced Manufacturing projects for the largest impact to organizational and operational goals and objectives.\n, • Travel may be required as technologies and projects are being researched, developed, implemented, and tested.\n, • Work effectively in a cross-functional matrix organization with other teams and sites.\n\n \n To be considered for this role, here's what you will typically bring with you:\n \n\n • Bachelor's degree in engineering or technical field. Mechanical Engineering, Electrical Engineering, or Software Engineering preferred.\n, • Plus 3 years of relevant experience including projects in industrial automation and control systems, preferably in a manufacturing environment. Focused scholastic research or internships/co-op experience will be considered.\n, • Knowledge of manufacturing systems, mechanical systems\n, • Electronics, and electromechanical systems experience preferred\n, • Conceptual understanding of computer programming and software development relating to manufacturing systems. Practical computer programming experience is a plus.\n, • CAD software knowledge and experience. Siemens NX experience a plus.\n, • Effective communication skills.\n, • Ability to work under pressure and deliver results within deadlines.\n, • Ability and willingness to be flexible and cope with change. Moog is a fast-paced, dynamic organization.\n, • Less than 10% travel\n\n \n It would be great if you also had:\n \n\n • Knowledge of TRL (Technology Readiness Level) and MRL (Manufacturing Readiness Level) concepts frameworks.\n, • Ignition, Fanuc, and Rockwell Automation experience is desired.\n\n \n How We Care for You:\n \n\n • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance.\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages.\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all.\n\n \n Salary Range Transparency:\n \nBuffalo, NY $65,000.00-$94,000.00 Annually\n \n Salary Range Disclaimer\n \n \nThe base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. \n \n \nThis position requires access to U.S. export-controlled information.\n \n \nEOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran \n \n \nMoog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787.\n \n \nNo unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Advanced Manufacturing Engineer Reporting To: Engineer, Mfg. Project Work Schedule: Onsite - Buffalo, NY Moog's Military Aircraft Group is in search of an Advanced Manufacturing Engineer to join their team! Reporting to the Director of Advanced Manufacturing Engineering or delegate, and embedded within the Advanced Manufacturing Engineering Team, the individual will research, develop, test and implement a variety of Advanced Manufacturing technologies to improve or optimize current production needs or develop new products within the Military Aircraft Group. The successful candidate will work under supervision of Senior Engineers on a team of project, mechanical, electrical, robotics, controls, and software engineers and collaborate and work projects across other engineering and operations teams. This role offers a first shift, on-site schedule at our East Aurora NY location. As an Advanced Manufacturing Engineer, you will: Assist in identification, develop, test and implement appropriate Advanced Manufacturing technologies for application in Military Aircraft Group products and production processes. Support continued manufacturing improvement activities involving Advanced Manufacturing technologies resulting in productivity optimization via throughput increase, product quality, or process variation reduction. Collaborate with Senior Engineers and Project Management to plan, develop, and report out on Advanced Manufacturing projects from early to late stages of maturity to production implementation. Interact and interface with Moog employees from other departments, disciplines, sites and divisions to understand business needs and opportunities for Advanced Manufacturing technologies. Become intimately and fundamentally knowledgeable of Moog's products, designs, and customers' needs to identify and prioritize Advanced Manufacturing projects for the largest impact to organizational and operational goals and objectives. Travel may be required as technologies and projects are being researched, developed, implemented, and tested. Work effectively in a cross-functional matrix organization with other teams and sites. To be considered for this role, here's what you will typically bring with you: Bachelor's degree in engineering or technical field. Mechanical Engineering, Electrical Engineering, or Software Engineering preferred. Plus 3 years of relevant experience including projects in industrial automation and control systems, preferably in a manufacturing environment. Focused scholastic research or internships/co-op experience will be considered. Knowledge of manufacturing systems, mechanical systems Electronics, and electromechanical systems experience preferred Conceptual understanding of computer programming and software development relating to manufacturing systems. Practical computer programming experience is a plus. CAD software knowledge and experience. Siemens NX experience a plus. Effective communication skills. Ability to work under pressure and deliver results within deadlines. Ability and willingness to be flexible and cope with change. Moog is a fast-paced, dynamic organization. Less than 10% travel It would be great if you also had: Knowledge of TRL (Technology Readiness Level) and MRL (Manufacturing Readiness Level) concepts frameworks. Ignition, Fanuc, and Rockwell Automation experience is desired. How We Care for You: Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance. Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all. Salary Range Transparency: Buffalo, NY $65,000.00-$94,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Job Description Overview CTG is seeking to fill a Software Engineer II opening for our client in Buffalo, NY. Location: Buffalo, NY Duration: 12 months Overview: The Software Engineer II will provide designs and specify information systems solutions, delivering highly technical direction in the development of both new and existing applications. This role is crucial for addressing basic to complex problems and enhancements, ensuring solutions are technologically sound. The ideal candidate will serve as a principal application designer for major modifications, utilizing analytical and technical skills to evaluate client requirements and processes. Primary Responsibilities: • Oversee and complete systems analysis, design, and development for projects of varying complexity., • Act as a key individual contributor on complex projects, maintaining a strong functional understanding of supported applications., • Direct and mentor less experienced resources, coordinating development tasks for projects ranging from small to large scope., • Prepare and manage the technical components of project plans., • Collaborate with Development, Operations, and Technology teams throughout the systems development lifecycle, from technical analysis to user acceptance testing., • Prepare and execute detailed test plans, including debugging as necessary., • Analyze and understand complex interrelationships among programs, applications, and platforms., • Provide consulting and leadership in identifying and implementing new information technologies to meet business objectives., • Prepare and review thorough technical and functional specifications, as well as systems documentation., • Maintain effective operation and performance of supported applications and recommend new technologies, policies, or processes for improvement., • Adhere to and promote development standards and procedures., • Understand and comply with the Company's risk and regulatory standards, identifying issues that require escalation to management. Scope of Responsibilities: This position operates under the supervision of the Technology Team Lead, with the competence to work independently on high-level systems analysis and technical phases of development. The role includes managing activities of others on a project basis and monitoring performance on assigned projects. The job holder will interact with senior management, technology personnel, clients, and vendors, providing backup to higher management as needed. Supervisory/Managerial Responsibilities: • Direct and monitor the activities of less experienced personnel., • Provide guidance on project activities and performance evaluations. Education and Experience Required: • Minimum of an Associate's degree and 5 years of systems analysis/application development experience; or, in lieu of a degree, a combined minimum of 7 years higher education and/or work experience, including a minimum of 5 years in systems analysis/application development., • ServiceNow Developer or Administrator certification is a must., • ServiceNow Implementation Certification is a must., • Sr. ServiceNow Developer (VR/CC – SecOps)., • ServiceNow Development and Administration of Vulnerability Response (VR) and Configuration Compliance (CC) modules., • Providing architectural, design, configuration/development and operational support for VR and CC., • Prepare and conduct VR and CC and related dependencies updates., • Provide ServiceNow functional and process expertise in building world class programs., • Familiarity with application development software and hardware platforms., • Proficiency with personal computers and relevant project management, word processing, and spreadsheet software., • Strong problem-solving skills, organizational abilities, and attention to detail., • Excellent verbal and written communication skills, with experience in presenting to target audiences. Education and Experience Preferred: • Good understanding of the Bank's application framework., • ServiceNow SecOps implementation certificate is desired but not needed., • Subject matter expert in business with experience utilizing the supported application/system., • Advanced knowledge of applications and integrated systems., • Ability to work collaboratively in a team as well as autonomously., • Proven experience in multitasking and managing complex project components. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact the Recruiter Tana Stilloe at Tana.Stilloe@ctg.com. Kindly forward this to any other interested parties. Thank you!

Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and solve complex engineering problems. Contribute to the continuous improvement of data quality and project processes.

Review quality analysis results and disposition data challenges through Citi's corresponding Data/Issue management process. Lead day to day activities to support data quality resolution, and to optimize metrics reporting process. Requirements: Requires a Master's degree or foreign equivalent in Busi

Landscape And Irrigation Installer.We are looking for experienced landscape and/or irrigation installers who are looking for a change to join our landscape lighting team.The work is outdoors so you can still enjoy working outside and utilizing your skills while taking on a lighter task of installing

Kaleida Health is seeking a Manager for the Cardiac Procedure Lab at Buffalo General Medical Center.This full-time role involves overseeing day-to-day operations, managing patient flow, staffing, budget, and ensuring quality outcomes.The ideal candidate will have a BS in Nursing or Radiology, along

A leading retail company located in New York is seeking a Store Manager to oversee daily operations, ensuring maximum sales and profitability.The role includes managing guest services, inventory control, and compliance with company policies.Candidates must be at least 21 years old, possess prior ret

Develop, implement, and manage solutions and automatedworkflows, digital tools, and backend processes to optimize processes,operations, and compliance. Responsible for enhanced data transparency and quality through data mining andETL (Extract, Transform and Load) processes, identifying savings and p

Must have three (3) years (or one [1] year with a Master's) of experience with: Utilizing data systems and retrieval mechanisms including, DataLake and DataWarehouse to manage procurement business analytics; Evaluating technologies for procurement processes, developing regional policies and material

A leading pet care organization in New York is seeking an Assistant General Manager to support daily operations.This role involves leading by example in delivering customer service and maintaining a safe environment for pets and team members.The ideal candidate should have at least 2 years of experi

This position is ideal for a seasoned operations professional who thrives in complex environments, values accuracy and compliance, and enjoys working at the intersection of systems, data, and process improvement. Maintain and update process documentation, SOPs, and operational workflows. Coordinate

An innovative firm is seeking a passionate Security Engineer to enhance the security of its products and IT systems.

TikTok is committed to providing reasonable accommodations in our recruitment processes for candidates with disabilities, pregnancy, sincerely held religious beliefs or other reasons protected by applicable laws.

Please note that the data shared through the job application will be stored and processed by EXL in accordance with the EXL Privacy Policy. Leveraging proprietary methodology and best‑of‑breed technology, EXL Analytics takes an industry‑specific approach to transform our clients’ decision‑

Researches, reviews, and analyzes the effectiveness and efficiency of existing requirements-gathering processes and develop strategies for enhancing or further leveraging these processes. Creates process models, specifications, diagrams, and charts to provide direction to developers and/or the proje

EXL Service is seeking a data analytics professional in a hybrid role to implement and maintain SQL/SAS and Power BI solutions.You will work with product analysts, data scientists, and clients to translate business needs into scalable data tasks and ETL pipelines.The ideal candidate has 2+ years in

Accomplishes work requirements by orienting, training, assigning, scheduling, coaching employees; following production, productivity, quality, and customer-service standards; identifying work process improvements.

We have an opening for a talented Netflix Data Analyst to perform daily responsibilities with dedication.Stay adaptable in a dynamic, fast-paced environment.Work with your team to maintain efficiency and service quality.Perks include competitive pay, flexible schedules, hands-on training, a collabor

Bachelor of Science in Architecture, Engineering discipline or Construction Management Minimum 5 years of experience working on large advanced technology, semiconductor or data center projects, Strong working knowledge of contract management, project delivery methods, change management, schedu

Manage and oversee field operation and engineering processes and procedures. Work with Finance to initiate the Pay Application process and follow up to ensure payment is received in a timely manner. Thorough knowledge of construction cost, scheduling, estimating, purchasing, and engineering principl

Process Engineer Job Duties: Oversees and assesses existing processes and workflows. Assembles reports to document process status and changes. Utilizes process simulation software to test and find the

Develops the subcontracting strategy; reviews and writes scopes and other deliverables to ensure the integrity of the buyout process Implements and enforces all aspects of contracts; creates and leads risk mitigation plan; prepares draft contracts, agreements, and purchase orders Assumes account

Operations Manager Job Duties: Oversees operational systems, processes, and infrastructure while looking for opportunities of improvement or revision. Plays a significant role in long-term planning, project sta

Drive consistency between reported financials and integration tracking (synergies, costs, AOCs) Identify and resolve discrepancies between ERP financials and integration reporting decks Experience & Qualifications Requirements Education Bachelor's degree in Finance, Accounting, Economics, or related

Through management of staff, collaborate with senior management to establish appropriate rent levels. Process timely and accurate move-ins, move-outs, recertifications and renewals. WinnCompanies is in search of a dynamic Senior Property Manager II to join our team at Upstate New York Regional team

Researches, reviews, and analyzes the effectiveness and efficiency of existing requirements-gathering processes and develop strategies for enhancing or further leveraging these processes. Creates process models, specifications, diagrams, and charts to provide direction to developers and/or the proje

Experience working in a fast-paced and customer-centric environment Ability to analyze processes and information, identify problems and trends, and develop effective solutions and strategies Excellent communication, leadership, coaching, and conflict resolution skills * Trustworthy; maintain pat

Lead continuous improvement initiatives focused on process standardization, automation, workflow optimization, performance metrics, and AI-enabled solutions to improve efficiency, scalability, and service delivery. Preferred Qualifications** + Experience leading project accounting teams within an e

In quality engineering at PwC, you will focus on implementing leading practice standards of quality in software development and testing processes. Responsibilities Expertise in ERP Automation testing combined with Quality Engineering Lead teams and manage client accounts with strategic planning

Hagerty Consulting Inc Hagerty is the nations leading emergency management and homeland security consulting firm Known for its public spirit innovative thinking problem solving and exceptional people Hagerty is sought after to work on some of the largest and most complex crisis and emergency managem

Project Engineer Job Duties: Completes engineering projects by organizing and controlling project elements.