Trabajos shop fitter en Houston, TexasCrear alertas

Job Description Job Summary: Lays out, installs, maintains, and repairs all types of tubing, fittings, and fixtures in plant maintenance and construction. Interprets drawings and sketches. Plans work procedures and select materials based on the needs of the job. SCHEDULE: 40 hours (Monday-Friday) Duties and Responsibilities: • Lays out work; calculates dimensions and radii of bends; makes sketches of tubing., • Builds a spreadsheet for bends and gang runs, sets up and operates bending, threading, and cutoff equipment, uses hand tools, and prepares and fabricates tubing., • Test, inspect, dismantle, repair, replace, or install any type of high- or low-pressure tubing, fittings, fixtures, and parts for installation, maintenance, and repair., • Fabricates hangers and supports., • Handles or makes provisions for handling materials, equipment, and tools to and from the job site in connection with the work., • Cleans all work areas, • Performs any other duties assigned by the supervisor., • Performs all work safely and efficiently and keeps work area clean and orderly., • Willing to work with the electrical crew and other trades as the job requires. Minimum Requirements: • Safety-first mindset and culture, • 3-5 years of work experience as an industrial tube-bender / Instrument Fitter or has completed a curriculum closely related to tube-bender / Instrument Fitter work from a vocational institution. Preferred Requirements: • You must be drug-free - Able to pass a hair follicle test, • High School Diploma or GED, • Proof of US Citizenship or a valid work permit is required, • Current driver's license and proof of insurability Compensation and Benefits: Wingo Service offers a competitive compensation package. This position supports 40 hours per week with compensation between $34-$38/hr. based on experience. About Wingo Service Company, Inc.: WINGO SERVICE COMPANY is a full-service organization that provides integrated system design, drafting, installation, calibration, start-up, field service, contract maintenance, and preventive maintenance services. Our UL-listed panel fabrication shop and fabrication facilities support small projects to complex integrated mechanical systems. We are licensed in Texas as an electrical contractor. We also provide technical personnel under contract to work in the industrial plants throughout the area. We have also completed projects worldwide for our customers. Our five Divisions are ready to provide solutions tailored to your specific needs and preferences: • Instrumentation and Analytical Division • Security Division • Electrical Division • Contract Maintenance Division • Systems Integration Division \nCompany Description WINGO SERVICE COMPANY is a full‐service organization providing integrated system design, drafting, installation, calibration, start‐up, field service, contract maintenance, and preventive maintenance. Our UL‐listed panel fabrication shop and fabrication facilities support everything from small projects to complex integrated mechanical systems. We are licensed as an electrical contractor in Texas and also supply technical personnel under contract to industrial plants throughout the region. Our four divisions deliver solutions tailored to each customer’s needs: Instrumentation & Analytical, Electrical, Contract Maintenance, and Systems Integration. WINGO SERVICE COMPANY is a full‐service organization providing integrated system design, drafting, installation, calibration, start‐up, field service, contract maintenance, and preventive maintenance. Our UL‐listed panel fabrication shop and fabrication facilities support everything from small projects to complex integrated mechanical systems. We are licensed as an electrical contractor in Texas and also supply technical personnel under contract to industrial plants throughout the region. Our four divisions deliver solutions tailored to each customer’s needs: Instrumentation & Analytical, Electrical, Contract Maintenance, and Systems Integration.

Job Description We're hiring a Pipe Fitter for our Northwest Houston area client! We are looking for experienced, mechanically skilled fitters with strong blueprint reading and precision layout skills who are ready to interview immediately! DESCRIPTION OF YOUR DREAM JOB: Job Title: Pipe Fitter NIGHTS Location: Northwest Houston, TX 77041 Pay: $18.00–$30.00/hour (based on experience and skill level) Hours: Monday–Friday, 6:00PM–5:30AM (Overtime available with occasional Saturdays as needed; Duration: Temp-to-Hire Description of Duties: Fit and prepare pipe and vessel components according to engineering drawings and fabrication specifications. Perform layout, measurements, fit-ups, and dimensional checks to ensure components are properly positioned before welding. Inspect and verify fit-ups using appropriate measuring tools and utilize flame cutting torches, carbon arc gouging, plasma cutting equipment, portable grinders, and other fitting and fabrication tools. Work closely with welders and fabrication teams to maintain proper manufacturing sequence, dimensional accuracy, quality, and production standards within a pressure vessel fabrication shop. Requirements: Previous pipe fitting, vessel fitting, or industrial fabrication experience preferred. Candidates must be proficient in reading a tape measure to 1/16" or smaller and able to read and understand engineering drawings. Must have the ability to calculate degrees, angles, and circumference using basic math, algebra, and geometry. Experience with welding, grinding, cutting, and fitting tools is required. Previous experience working in a pressure vessel or heavy fabrication shop is strongly preferred. Candidates should demonstrate strong attention to detail, mechanical aptitude, and the ability to accurately inspect and verify fit-ups. \nCompany Description Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com. Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com.

Job DescriptionTIG Welder Pay: $27 - $36 Location: Houston, TX Temp-to-hire Openwork, formerly Meador Staffing, is seeking a skilled welder-fitter TIG Welder who can take a drawing, fit the parts, and lay down code-quality TIG welds on pressure-retaining components. Completed work goes into gage chambers, bridles, water columns, and related assemblies, and it will be inspected and documented. Precision is critical because products are used in pressure-containing applications. Responsibilities • Read and work from fabrication drawings, weld maps, and WPSs, • Fit up pipe, fittings, flanges, and chambers to tolerance, including tacking, alignment, and squaring, • Weld by GTAW (TIG) on carbon steel and stainless steel, plus other alloys as jobs require, • Weld to ASME Section VIII and Section IX requirements, following approved WPS parameters, • Inspect your own work and keep up with visual, dye penetrant, hydrostatic, and radiographic test requirements, • Keep traveler and weld records accurate so traceability stays intact, • Keep your work area clean and safe, and help other shop staff when needed, • Perform all duties assignedQualifications, • Strong TIG welding skills on pipe and plate, • Proven fitting ability, including blueprint reading and use of measuring and layout tools, • Must pass a 6G pipe weld test at QTS expense (for the first test) before any offer is made. (We will allow the candidate to take it a second time at the candidate’s expense). No exceptions., • At least 2-3 years of pressure vessel, piping, or code fabrication experience (preferred), • Working knowledge of ASME Section IX, plus Section VIII or Section I, • Comfort working with stainless and chrome-moly, and with purge and backing gas practices, • Current continuity log or existing ASME qualifications, • Experience in a high-mix, low-volume job shop, • SMAW or GTAW/SMAW combination experience is a PLUS, • Attention to detail and pride in clean, consistent work, • Able to stand, bend, and work in all welding positions for long stretches, • Able to lift to [80] lbs, • High school diploma or GED, • Reliable attendance and willingness to work regular overtime, • Required PPE must be always worn Schedule Monday through Friday | 6:30 a.m. to 3:30 p.m. 30-minute lunch Regular overtime should be expected as order volume grows. Overtime is paid at time and a half for hours worked over 40 in a week. Occasional early starts or Saturday work may be required to meet ship dates.Why Openwork? Openwork has 50+ years of experience connecting talented people with great employers. We offer a people-first approach and opportunities to grow your career. Apply today at www.openwork.com and take the next step in your career with Openwork! EOE – Openwork is an Equal Opportunity Employer. Apply online on www.openwork.com and call our Clear Lake office at 281-486-1700 to get scheduled for an interview.

Job Description Spitzer, a recognized industry leader in designing and fabricating high-specification equipment, is currently seeking Vessel Fitters to join our team. What Does a Week in the Life of the Vessel Fitter Look Like? • Understand and follow safety policies and procedures of the shop., • Conforms to shop quality practices and procedures., • Interprets drawing and specifications to determine best sequence of fabrication., • Uses MIG & Flux core welding processes to tack., • Tack Carbon steel and/or Stainless-steel components using weld procedures., • Fit up nozzles & couplings according to the outside projections and angle., • Layout & cut baffle plates, openings to fit nozzle & couplings to head based on drawing specifications., • Fit-up Internals subassembly for pressure vessels and Fit-up internal assembly into the required shell., • Checks fit ups of other welders using appropriate tools., • Uses flame cutting torch, carbon arc gouging, plasma arc, portable grinders and other tools., • Works productively with others to help determine best solutions., • Uses overhead cranes, jib cranes and other lifting/rigging devices to move components in a safe manner is a plus., • Other duties as assigned by the Foreman. Skills (to Pay the Bills) Here's a list of a few competencies that the Vessel Fitter at Spitzer should have… • Ability to follow shop procedures, quality procedures and safely practices., • Must have verbal skills with fluency for the responsibilities assigned., • Requires 5+ years of pressure vessel shop fabrication experience., • Proficient in basic math including addition/subtraction of whole numbers, fractions and decimals., • Proficient in reading a tape measure / ruler in increments of 1/16” or smaller., • Ability to calculate degrees and circumference using basic algebra and geometry, • Ability to read and understand engineering drawings., • Ability to understand manufacturing sequence in a vessel fabrication shop., • Ability to use various welding, grinding and fitting tools., • Must be able to perform 3G weld test., • Ability to lift materials job components up to 30 pounds., • Experience in fabricating large vessels / towers as well as smaller vessels carbon steel or stainless steel. What's it like to be a part of the Spitzer Family? Spitzer is a fast-paced company that focuses on exceeding our customers’ expectations on every project. We believe we provide exceptional value through the quality of our work, our commitment to safety and by delivering products on schedule. You'll find a unique team of individuals who continue to push the boundaries of what is possible. A diverse team, a great culture, and a positive work environment are just some of the things that make working at Spitzer so rewarding. Employee Driven Benefits At Spitzer, we take pride in listening to what our employees want in benefits. We've come up with a unique set of employee benefits and designed them around our culture. • Health Care Insurance (multiple plans to choose from!), • Dental Benefit options, • 401k plan, • Disability Insurance, • Paid Time Off that begins accruing your first day of employment, • Eight paid company holidays, • Plenty of Overtime Opportunities!, • Tuition Reimbursement Program, • Employee Discounts with LifeMart!! Oh, and $alary Of course, we didn't forget salary… Spitzer offers competitive pay depending on education, certifications, and experience. Work Schedule Spitzer currently runs two shifts, Monday through Friday with overtime on weekend work as needed. Late afternoon/evening/weekend hours may be required as needed. Work schedules may change to accommodate production needs. Application Process If this sounds like a great opportunity to you, follow the steps below: • Visit our website to apply to complete Online Application, • Apply in Person at one of our locations: Fisher Division: 10543 Fisher Rd. Houston, TX 77041 We look forward to hearing from you!

Job DescriptionAbout the Role:Modular Equipment LLC is looking for a skilled Vessel Fitter to join our team in Houston, TX. This is a hands-on opportunity to work on exciting fabrication projects in a fast-paced, industrial environment where your craftsmanship truly matters. If you take pride in precision work and want to be part of a team that builds quality equipment, we want to hear from you. Responsibilities: • Fit, assemble, and weld (tack) pressure vessel cylinders, tanks, and related structural components per engineering drawings and specifications, • Read and interpret blueprints, weld symbols, and fabrication drawings to ensure accurate assembly, • Perform layout and fit-up of shells, heads, nozzles, flanges, and structural attachments, • Use hand tools, grinders, and measuring instruments to prepare and align components, • Collaborate with welders, pipefitters, and other fabrication team members to meet project deadlines, • Inspect completed assemblies for dimensional accuracy and compliance with ASME or applicable codes, • Maintain a clean, safe, and organized work area in accordance with shop safety standardsRequirements:, • Proven experience as a Vessel Fitter in an industrial fabrication environment, • Ability to read and interpret engineering drawings, blueprints, and weld symbols, • Familiarity with ASME pressure vessel codes and fabrication standards is a plus, • Proficiency with layout tools, measuring instruments, and hand/power tools, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently and as part of a team in a fast-paced shop environment, • Must be able to lift heavy materials and work in physically demanding conditionsAbout Us:Modular Equipment LLC is a Houston-based fabrication company specializing in the design and manufacturing of high-quality modular and process equipment. We are known for delivering reliable, precision-built solutions that keep our customers coming back time and time again. Our team is our greatest asset, and we are committed to providing a supportive work environment where skilled tradespeople can thrive and grow.

Job Description Field Leadership and Crew Management • Direct and supervise sprinkler fitters, apprentices, helpers, and other assigned field personnel., • Establish daily work assignments and clearly communicate production expectations to the crew., • Plan manpower requirements based on upcoming work and project schedule., • Monitor employee productivity and workmanship., • Hold crew members accountable for safety, attendance, productivity, quality, and company expectations., • Train and mentor apprentices and developing field personnel., • Promote teamwork, professionalism, and accountability on the jobsite., • Identify employee performance issues and communicate concerns to the Project Manager or appropriate supervisor. Planning and Production • Develop and execute daily and weekly work plans., • Understand project schedules, milestones, sequencing, and required completion dates., • Monitor labor hours and production against project budgets and expectations., • Identify potential labor overruns and notify the Project Manager before significant overruns occur., • Plan material, equipment, lift, and tool requirements in advance., • Minimize downtime caused by inadequate planning, missing materials, incomplete predecessor work, or coordination problems. • Coordinate work to support testing, inspections, ceiling closures, and project turnover. Fire Protection Installation • Supervise and participate in the installation of fire sprinkler and related fire protection systems., • Read and interpret approved fire sprinkler shop drawings and coordinate with architectural and trade drawings., • Lay out mains, branch lines, drops, arm overs, risers, standpipes, drains, fire department connections, and related components. • Verify pipe elevations, sprinkler locations, hanger locations, and system routing., • Supervise installation of threaded, grooved, welded, CPVC, and other approved piping systems as applicable., • Ensure proper installation of sprinklers, valves, backflow preventers, risers, standpipes, hangers, seismic bracing, FDCs, drains, and related equipment., • Ensure installation complies with approved drawings, specifications, applicable codes, manufacturer requirements, and company standards. Plan Review and Field Coordination • Maintain a current set of approved fire sprinkler shop drawings in the field., • Identify discrepancies between field conditions and approved drawings., • Recognize conditions requiring clarification, redesign, or an RFI., • Do not make unauthorized design changes when engineering or design approval is required., • Coordinate fire protection piping with ductwork, electrical systems, plumbing, structural components, ceilings, equipment, and other building systems., • Participate in coordination meetings when required., • Maintain accurate field dimensions and provide sketches or information required for fabrication and design revisions. Material and Equipment Management • Review material requirements before scheduled installation., • Prepare material lists and field takeoffs as required., • Coordinate material needs with the Project Manager, purchasing department, fabrication shop, or designated company personnel., • Verify material deliveries for quantity, condition, and accuracy., • Maintain reasonable control over company materials and minimize waste., • Maintain accountability for company tools, equipment, lifts, and rental equipment assigned to the project. Quality Control • Ensure installations meet company workmanship standards., • Verify work against approved drawings before ceilings or walls are closed., • Inspect sprinkler locations, pipe routing, elevations, hanger spacing, bracing, valves, drains, and other system components., • Identify and correct deficiencies before requesting inspection., • Minimize leaks, punch-list items, rework, and callbacks., • Perform or supervise hydrostatic testing, flushing, and system testing as required., • Prepare systems for inspections by the General Contractor, owner, engineer, fire marshal, or other Authority Having Jurisdiction. • Maintain accurate as-built documentation throughout construction. Safety Responsibilities • Maintain a safe work environment for all assigned personnel., • Enforce company safety policies and applicable OSHA requirements., • Conduct required pre-task plans, Job Hazard Analyses, Job Safety Analyses, or similar safety documentation., • Conduct toolbox talks and safety meetings as required., • Ensure proper use of personal protective equipment and fall protection., • Ensure ladders, scaffolds, aerial lifts, power tools, threading machines, and other equipment are used properly., • Identify unsafe conditions and take immediate corrective action when necessary., • Exercise stop-work authority when an imminent safety hazard exists., • Immediately report injuries, property damage, near misses, or significant safety incidents according to company procedures. Testing, Inspection, and Turnover • Coordinate testing and inspection activities with the Project Manager and General Contractor., • Ensure systems are complete and internally reviewed before requesting an inspection., • Supervise hydrostatic tests and other required system tests., • Coordinate flushing and system startup procedures., • Maintain documentation of testing and inspection results., • Complete punch-list work promptly and assist with final system turnover and project closeout. Documentation and Reporting • Complete accurate daily reports and document manpower and labor hours., • Record work performed and areas completed., • Document delays, disruptions, access restrictions, and conditions affecting productivity., • Document significant coordination conflicts and changed conditions., • Complete time-and-material tickets accurately and obtain required signatures., • Maintain accurate redlines and as-built information., • Submit documentation to the Project Manager according to company procedures. Change Management • Recognize work that may be outside the original subcontract scope., • Notify the Project Manager before performing significant additional or changed work whenever possible., • Do not authorize substantial extra work without appropriate approval., • Track labor, material, equipment, and other costs associated with changed work., • Maintain supporting documentation, including photographs and T&M tickets. Communication and Coordination • Serve as the primary field representative for the fire protection contractor on assigned projects., • Maintain regular communication with the Project Manager., • Communicate manpower requirements, material needs, schedule concerns, coordination conflicts, safety issues, and potential cost impacts promptly. • Coordinate professionally with the General Contractor's Superintendent and other subcontractors., • Escalate issues that cannot be resolved at the field level., • Protect the company's contractual and financial interests by accurately documenting conditions affecting the work. Minimum Qualifications • Previous experience installing commercial fire sprinkler systems., • Previous leadership experience as a Foreman, Lead Fitter, or comparable field position preferred., • Demonstrated ability to independently read and understand fire sprinkler shop drawings., • Working knowledge of applicable NFPA standards, particularly NFPA 13., • Knowledge of construction safety practices and OSHA requirements., • Ability to supervise and develop field personnel., • Ability to plan work several days or weeks in advance and accurately document project conditions., • Valid driver's license when required for the position., • Applicable state licenses, registrations, certifications, or endorsements must be maintained where required by jurisdiction. Preferred Qualifications • OSHA 10 or OSHA 30 certification., • Aerial lift certification., • First Aid/CPR certification., • Manufacturer training for specialty fire protection systems., • Experience with fire pumps, standpipes, seismic bracing, and specialty suppression systems., • Experience managing multiple crews or large commercial projects., • Familiarity with electronic construction drawings, tablets, and construction management software. Physical Requirements · Ability to stand and walk for extended periods; climb ladders and stairs; work from aerial lifts and elevated platforms; bend, kneel, reach, and work overhead; handle pipe, fittings, tools, and construction materials; and work in typical indoor and outdoor construction environments. · Employees must be able to safely perform the essential functions of the position with or without reasonable accommodation. Performance Expectations • Safety: Work is planned and executed without preventable injuries, unsafe practices, or repeated safety violations., • Quality: Systems are installed correctly with minimal leaks, deficiencies, rework, or punch-list items., • Production: Crews meet reasonable productivity expectations and labor is managed against the project budget., • Schedule: Work is planned sufficiently in advance to support project milestones and avoid preventable delays., • Planning: Manpower, materials, tools, equipment, and access requirements are anticipated before they are needed., • Leadership: Employees receive clear direction, accountability, training, and professional supervision., • Documentation: Daily reports, as-builts, T&M tickets, photographs, delays, and changed conditions are documented accurately and promptly. • Communication: Project management is informed of significant issues before they become major schedule or cost problems.

Job Description Pipe Fitter Location: Houston, TX Pay: $27.00–$33.00 per hour, DOE Night Shift Differential: Additional 10% pay differential for qualifying night-shift hours Position Overview We are seeking an experienced Pipe Fitter to join our manufacturing and fabrication team. The Pipe Fitter is responsible for the precise layout, fabrication, assembly, installation, and maintenance of pipe systems and supports. This position requires experience working with a variety of metal and non-metal piping materials, including steel and stainless steel. The successful candidate will be able to read blueprints and piping and instrumentation drawings, accurately measure and fabricate pipe, and safely operate pipe-fitting tools and equipment. The Pipe Fitter must demonstrate strong mechanical aptitude, attention to detail, and a commitment to safety and quality while working effectively with team members to meet production schedules. Key Responsibilities Select the appropriate type and size of pipe, fittings, supports, hangers, hydraulic cylinders, and related materials according to drawings and specifications. • Read and interpret blueprints, P&IDs, schematics, and technical documents., • Measure and lay out pipe accurately according to required dimensions and specifications., • Cut pipe using saws, pipe cutters, hammers and chisels, cutting torches, and pipe-cutting machines., • Thread pipe using pipe-threading equipment., • Bend pipe using pipe-bending rolls and pipe-bending machines., • Assemble and install metal and non-metal pipes, tubes, fittings, and related components., • Work with steel, stainless steel, and other applicable piping materials., • Set up and use MIG welding equipment for pipe-fitting and fabrication applications as required., • Install and position pipe supports, hangers, and related components., • Verify dimensions, alignment, fit-up, and assembly to ensure quality and accuracy., • Manage material inventory and ensure adequate materials are available to meet production requirements., • Coordinate with the warehouse team to ensure timely replenishment of materials., • Participate in material inventory audits and assist with accurate material tracking., • Maintain tools, equipment, and work areas in a clean and organized condition., • Follow 5S principles and company housekeeping standards., • Follow OSHA requirements and all company safety policies and procedures., • Conduct required safety checks and immediately report unsafe conditions or concerns to supervision., • Properly use all required PPE and safe work practices., • Participate in required safety training., • Perform other duties as assigned by management. Required Skills & Qualifications • Ability to read and interpret blueprints and piping and instrumentation drawings (P&IDs)., • Ability to accurately read and use measuring devices., • Knowledge of pipe schedules, dimensions, specifications, and base materials., • Ability to set up and operate a MIG welding machine., • Strong mechanical aptitude and troubleshooting skills., • Proficiency with hand and power tools used in pipe fitting., • Ability to perform basic mathematical calculations for measuring and determining dimensions., • Strong attention to detail and commitment to quality., • Good communication skills and ability to work effectively with team members and supervisors., • Strong safety awareness and understanding of safe work practices in a manufacturing environment., • Good command of the English language, both written and verbal. Education & Experience • High School Diploma or equivalent required., • Minimum 5 years of related pipe-fitting experience in a manufacturing environment. Preferred Qualifications • Technical training or certification in pipe fitting., • Experience with advanced pipe-fitting techniques and specialized tools., • Experience with automated pipe-cutting and threading equipment., • Forklift certification., • Overhead crane certification., • Additional welding or fabrication certifications., • Knowledge of manufacturing safety standards and best practices., • Familiarity with lean manufacturing and 5S principles. Physical Requirements & Work Environment This position is performed primarily in a manufacturing/shop environment and may involve exposure to industrial equipment, materials, noise, and varying temperatures. The Pipe Fitter must be able to: • Stand for extended periods, up to 10 hours per day with a lunch break, and up to 6 days per week as required., • Regularly sit or stand, bend, reach, and move throughout the work area., • Frequently move materials weighing up to 50 pounds., • Work in a non-air-conditioned environment., • Work around industrial tools, machinery, piping, and fabrication equipment., • Demonstrate normal vision and the ability to distinguish colors., • Maintain adequate hand-eye coordination for measuring, cutting, fitting, and assembly work., • Safely perform repetitive bending, reaching, lifting, and other physical movements associated with pipe fabrication., • Safety & PPE, • Safety is a critical responsibility of this position. Employees must follow all company safety policies, OSHA requirements, and applicable safe-work practices. Required PPE includes: • Safety glasses, • Steel-toe boots, • Additional PPE as required for specific tasks and work areas, • Hearing protection/earplugs are recommended and may be required in designated areas.

Job Description Electrical Controls Technician Why Join Oilgear As a leader in high-performance hydraulic solutions, The Oilgear Company offers a collaborative environment where innovation, efficiency, and reliability drive every decision. We empower employees with ownership of their work and support ongoing growth through professional development and continuous improvement. Summary: Assemble, install, modify, and test electrical components using blueprints, schematics, or written work instructions. Perform testing and assembly tasks as instructed by Department Leads or Director. Maintain a clean and safe work environment. Have a full understanding of the entire production process. Complete training in all production areas. Complete paperwork and records in a timely manner. Support inventory accuracy. Essential Responsibilities and Duties: • Perform testing and assembly tasks as instructed by Shop Leads or Operations Manager., • Assemble, install, modify, and test electrical components using blueprints, schematics, or written work instructions., • Assemble control modules using steel chassis, existing electronic assemblies, and point-to-point wiring., • Maintain a clean and safe work environment., • Perform diversified assembly and test operations to assemble highly intricate and/or large and expensive precision apparatus, machines, and equipment having critical tolerances and strict inspection/testing requirements., • Aid in the planning of assembling and testing procedures; instruct and check the work of Assemblers of lower classification and General Laborers., • Complete skilled fitting, aligning, adjusting, and secondary machining of products., • Have a good understanding of Allen-Bradley PLC modules, UPS battery backup systems, and control panels., • Perform complex testing procedures on sub-assemblies and units., • Work from complicated assembly drawings and specifications., • Use a wide variety of precision measuring instruments and gauging devices., • Ensure completed assemblies are subject to inspection and test., • Perform light preventative maintenance and housekeeping duties for areas and equipment in the assigned work center., • Produce quality assemblies and attain a working knowledge of possible defects or malfunctions, and take corrective action as required., • Fully understand and comprehend the assembly of sub-assemblies, the final assembly, and testing to ensure the engineering performance specifications are satisfied in all areas., • Maintain or exceed the approved rate of production., • Maintain an acceptable attendance record, an acceptable overall work record, and purchase the required tools for the classification., • Complete training in all production areas., • Complete paperwork and records in a timely manner., • Support inventory accuracy., • Maintain clear communication with the next shift., • Report defective materials or questionable conditions per established processes., • Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations., • Perform prescribed preventative maintenance on machines as required per P.M. charts. Qualifications: • 2 years’ experience in manufacturing/assembly., • Basic mechanical knowledge., • Mechanical aptitude with a technical specialty – Auto, farm, industrial, oil & gas, instrument fitter, mechanical technician., • Subsea Blow Out Prevention controls experience is considered a plus., • Demonstrated ability to use a variety of precision test equipment, measuring instruments, and gauging devices., • Must be able to read and understand electrical schematics, procedures, hydraulic flows, and pressure transmitter graphs to test, identify leaks, and troubleshoot., • Must have demonstrated ability to perform inspection and testing and adhere to production and quality standards and drawing specifications of final and sub-assemblies., • Demonstrated ability to troubleshoot quality, product, or production issues and provide recommendations for resolution., • Requires a moderate degree of skill and assembling technique., • Experience and knowledge of basic mechanical principles, testing procedures, and basic hydraulics., • High School Diploma or GED, with above-average mechanical ability., • Ability to read, comprehend, and follow processes, procedures, and policies., • Ability to communicate effectively verbally and in writing with coworkers, supervision, and management. What We Offer • Paid Time Off (PTO), • Paid holidays, • 401(k) retirement plan with company match, • Medical, Dental, and Vision insurance, • Health Savings Account (HSA) with employer contribution, • Flexible Spending Account (FSA) options, • Employer-paid life and disability insurance, • Optional hospital, critical illness, and accident insurance, • Employee Assistance Program (EAP), • Safety shoe reimbursement program, • Safety glasses reimbursement program, • Tuition assistance up to $5,000 per year Equal Employment Opportunity & Accommodation Statement: The Oilgear Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law. The Oilgear Company is committed to providing reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and applicable state laws. Applicants or employees requiring accommodation may contact Human Resources. Employment Status Statement: Employment with The Oilgear Company is at-will. This means that either the employee or The Oilgear Company may terminate the employment relationship at any time, with or without cause or notice, in accordance with applicable law. Nothing in this job description or any other Company document should be interpreted as a contract of employment, an offer of continued employment, or a guarantee of employment for any specific duration.

Job DescriptionThis Job is for relocation to Denver, Colorado. Pay: $26.00 - $38.00/hourly paid weekly + Relocation which includes temporary housing benefit! Night Shift: 15% Differential. Relocation Information: Colorado Candidates under 100 miles: $2,000 Sign On Bonus Colorado Candidates over 100 miles: $5,000 Relocation Out-of-state Candidates: $11,000 Relocation package Interested in applying for RK? Get a firsthand look at life in our manufacturing facility. Take a Look Inside RK's Henderson Shops Hear directly from our team and see what a typical day on the job looks like. Learn about the work, culture, expectations, and opportunities that make RK a great place to build your career. RK Company Overview RK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Position Summary Performs the full range of welding tasks required in the fabrication of structural and miscellaneous metal components. Welders are responsible for interpreting blueprints, operating trade-specific machinery, and executing quality welds in accordance with project specifications and safety standards. This position is classified into Welder 1, Welder 2, or Welder 3 based on certifications, experience, and demonstrated capabilities. Role Responsibilities • Must be able to pass 3G/ FCAW, 1G/ GMAW- MC and 3G/ GMAW-SC, • Produce high-quality products in accordance with established standards and procedures., • Read and interpret labels, job orders, and drawings to determine appropriate equipment and sequence of operations., • Inspect products for compliance and document results; maintain equipment as required., • Work collaboratively with team members to meet production schedules and performance goals., • Operate lift trucks and overhead cranes safely and efficiently., • Accurately use measuring tools, including tape measures., • Adhere to all safety protocols and shop regulations., • Support continuous improvement efforts through Lean and Six Sigma practices., • Perform other duties as assigned. Qualifications Fitter 1, • High school diploma or equivalent; technical education or certification is a plus., • 3-5 years of experience in welding and metal processing (FCAW, MIG)., • Strong mechanical aptitude and ability to successfully operate proven fixtures., • Perform duties that are generally structured and recurring in nature., • Follow established objectives, guidelines, and standard operating procedures., • Demonstrate strong mechanical aptitude and proficiency in operating established fixtures and tools., • Demonstrate excellent problem-solving skills and can work independently when required, • Maintain high attention to detail and precision., • Contribute effectively to a team under the general supervision of an experienced professional or manager., • Read and interpret process sheets, cut lists, tolerances, and basic technical drawings/blueprints., • Perform intermediate-level mathematical calculations as needed for the role Fitter 2: All of the above plus:, • 5-10 years of experience in welding, metal processing, and structural fitting., • Fit beams, columns and misc. metals, • Demonstrate sound judgment and take initiative in troubleshooting and recommend effective solutions., • Provide mentorship and guidance to junior fitters., • Proficient in reading technical documents and blueprints., • Perform intermediate-level mathematical calculations including trigonometry and geometry., • Demonstrate an understanding of continuous improvement initiatives and actively participate in Lean and Continuous Improvement process enhancements. Fitter 3: All of the above plus:, • 10+ years of experience in welding, metal processing, and structural fitting. Certified in SMAW, FCAW, GMAW (all positions). Experience in COBOT programming. Experience in AutoCAD. Design and build semi-automated fixtures. Design and setup fitting and welding assembly lines. Fit complex curving of rails, stairs and canopies. Design immediate fixtures. Skilled in welding in confined spaces using mirrors. Fully program welding robots and operate AutoCAD. Advanced mechanical aptitude to coordinate own tasks with a specific range of responsibilities under established procedures. Operate independently with minimal supervision. Read advanced technical documents and blueprints. Perform advanced-level mathematical calculations including trigonometry and geometry. Manage individual responsibilities within defined parameters, ensuring alignment with established processes. Collaborate with the shop foreman to ensure production targets are achieved efficiently and on schedule. Communicate job status to shop superintendent. Read blueprints with ISO, European standards and raw contract drawings. Skilled in hand drafting and sketches. Lead small teams and contribute to advanced complexity continuous improvement initiatives, including Lean and Continuous Improvement projects Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch. Work in all types of weather. Lift, move, and/or carry up to 50 lbs. Working knowledge of all trade materials and tools. Comply with all company policies and procedures. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. RK Mechanical employees and subcontractors must meet safety system requirements, including RK Orientation, CPR/First Aid/AED/Bloodborne Pathogens, Hazard Identification, and OSHA 10. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description D7 Pneumatics LLC is a trusted leader in the fire protection and pneumatic systems industries. We pride ourselves on delivering high-quality, reliable, and innovative solutions for a variety of sectors. We are looking for a motivated and detail-oriented Certified Sprinkler Fitter to join our team. This role offers an excellent opportunity to apply your technical expertise and contribute to safety, efficiency, and the quality of our installations. Job Overview: As a Certified Sprinkler Fitter at D7 Pneumatics LLC, you will be responsible for the installation, maintenance, and repair of fire sprinkler systems, ensuring that projects meet high-quality standards and are completed safely and efficiently. You will collaborate with other team members and provide technical guidance to apprentices and other field personnel. You will play a key role in ensuring projects are executed according to specifications and safety regulations. Key Responsibilities: • Coordinate with the Superintendent/Foreman: Work closely with the Superintendent/Foreman to determine the most efficient methods for completing assigned and special projects., • Material and Equipment Management: Help assess and determine the material, tools, and equipment needed for the successful completion of each job, ensuring timely and accurate procurement., • Quality and Safety Assurance: Ensure adherence to quality and safety controls, maintaining a safe work environment and delivering projects with zero time lost due to accidents or safety incidents., • Care and Maintenance of Company Property: Take responsibility for the proper use and care of all company-issued vehicles, equipment, and tools, protecting them from damage, deterioration, or theft. Ensure that all company property is kept clean and well-maintained., • Training and Development: Assist in the development and training of field personnel on proper installation procedures, promoting a high level of professionalism and safety awareness among the team., • Technical Consultation: Provide technical support and advice to apprentices, technicians, designers, and shop employees to resolve issues and maintain high installation standards., • Additional Duties: Respond to other responsibilities assigned by the Labor Supervisor and/or Project Foreperson, contributing to team success and project efficiency., • Other Duties as Assigned: Undertake additional tasks as requested by management, ensuring the smooth operation of projects and the company. Qualifications: • REQUIRED: 3 or more years of experience installing sprinkler systems, • Preferred: 5 or more years of experience installing sprinkler systems, • Ability to read and interpret blueprints, schematics, and technical drawings., • Skilled in the use of tools and equipment related to sprinkler fitting and fire protection systems., • Excellent problem-solving, troubleshooting, and diagnostic abilities., • Demonstrated ability to work safely in accordance with OSHA regulations and company safety protocols., • Strong communication skills, both written and verbal, with the ability to work effectively with team members, apprentices, and management., • Capable of lifting heavy materials (up to 50 lbs) and working in a variety of environments, including confined spaces and elevated areas., • Ability to take initiative and complete tasks with minimal supervision., • Must have a valid driver’s license and a clean driving record.

Summary A Master Welder is a top-tier welding professional with deep, proven expertise across all welding processes. This individual not only meets, but exceeds the highest standards required of a Fabrication Welder. With multiple advanced qualifications in each process, the Master Welder brings exceptional craftsmanship, consistency, and technical precision to every project. A Master Welder will support company goals through outstanding productivity and quality, actively seek opportunities to improve workflows, and help guide & lead others through actions, not words. Reliability is a hallmark of this role, impeccable attendance, strong professionalism, and a clean disciplinary record are essential. Education and Experience • High School Diploma or equivalent is preferred, not required., • Vocational diploma or training in welding a plus not required, • Experience welding with exotic materials, • Minimum 5 years' experience to be eligible for this role Essential Functions Essential functions, as defined under the American with Disabilities Act, may include the following tasks, knowledge, skills, and other characteristics. This list of tasks is illustrative ONLY and is not comprehensive listing of all function and tasks performed by position in this class. It does not imply that all positions within the class perform all of the duties listed, nor does it necessarily list all possible duties that may be assigned. This listing is subject to change at any time and additional responsibilities can be added as business conditions require. • Have mastered and have excellent proven understanding of all of the processes performed by ETW., • This includes passing weld qualification tests for the following but is not limited to: GTAW, GTAW-P, Tri-Pulse, SMAW, SAW, PAW, GMAW or FCAW, • Ability to perform open root welding in fixed positions., • Ability to work with a variety of exotic materials (i.e.: Aluminum, Carbon Steel, Copper, Stainless Steel, etc.), • Leads the workforce on assigned shifts with a high focus on quality, • Takes ownership over the results of work performed and defines the requirements of work instructions, welding procedures and supervisor/team lead direction., • Always keep a neat and tidy work area. All tools to be neatly stored and kept in good condition., • Perform daily, weekly and monthly cleaning of both your area and other areas of the shop when assigned, this includes taking out trash, sweeping, mopping & straightening., • Grind, polish, wire wheel and prepare parts for welding as instructed., • Use cleaners to clean parts before welding., • Can read and understand blueprints and welding drawings to properly lay out parts., • Can perform math including algebra and basic trigonometry., • Can fully read and understand welding procedures., • Can communicate and job instructions and direct fitter helper with project assignments, • Maintain an impeccable attendance record with ability to work rotating shifts, overtime, and/or weekends as necessary, • Demonstrates teamwork and the ability to work effectively with coworkers, supervisors, managers, customers, third party representatives and others as required., • Perform all tasks in a safe and responsible manner in accordance with company safety and quality policies., • Trains and mentors lower-level employees, • Can act as Team Leader in day-to-day operations when needed., • Follow daily procedures and protocols as provided in job orientations and trainings., • Understands and drives company objectives to the team members Company Benefits: • Competitive compensation with eligibility for Bonus and Profit Sharing, • 401(k) retirement plan with Employer Match and Discretionary Quarterly Basic Contributions, • Paid Time Off, • Affordable health care, dental, and vision plans with eligibility upon hire date, • Healthcare FSA and Dependent care FSA, • Company-Paid Life, AD&D, and disability benefits Ellwood Technical Welding (previously known as C&J Cladding LLC) is an Equal Employment Opportunity/Affirmative Action Employer. Minorities/Females/Individuals with Disabilities/Protected Veterans.

Summary A Master Welder is a top-tier welding professional with deep, proven expertise across all welding processes. This individual not only meets, but exceeds the highest standards required of a Fabrication Welder. With multiple advanced qualifications in each process, the Master Welder brings exceptional craftsmanship, consistency, and technical precision to every project. A Master Welder will support company goals through outstanding productivity and quality, actively seek opportunities to improve workflows, and help guide & lead others through actions, not words. Reliability is a hallmark of this role, impeccable attendance, strong professionalism, and a clean disciplinary record are essential. Education and Experience • High School Diploma or equivalent is preferred, not required., • Vocational diploma or training in welding a plus not required, • Experience welding with exotic materials, • Minimum 5 years' experience to be eligible for this role Essential Functions Essential functions, as defined under the American with Disabilities Act, may include the following tasks, knowledge, skills, and other characteristics. This list of tasks is illustrative ONLY and is not comprehensive listing of all function and tasks performed by position in this class. It does not imply that all positions within the class perform all of the duties listed, nor does it necessarily list all possible duties that may be assigned. This listing is subject to change at any time and additional responsibilities can be added as business conditions require. • Have mastered and have excellent proven understanding of all of the processes performed by ETW., • This includes passing weld qualification tests for the following but is not limited to: GTAW, GTAW-P, Tri-Pulse, SMAW, SAW, PAW, GMAW or FCAW, • Ability to perform open root welding in fixed positions., • Ability to work with a variety of exotic materials (i.e.: Aluminum, Carbon Steel, Copper, Stainless Steel, etc.), • Leads the workforce on assigned shifts with a high focus on quality, • Takes ownership over the results of work performed and defines the requirements of work instructions, welding procedures and supervisor/team lead direction., • Always keep a neat and tidy work area. All tools to be neatly stored and kept in good condition., • Perform daily, weekly and monthly cleaning of both your area and other areas of the shop when assigned, this includes taking out trash, sweeping, mopping & straightening., • Grind, polish, wire wheel and prepare parts for welding as instructed., • Use cleaners to clean parts before welding., • Can read and understand blueprints and welding drawings to properly lay out parts., • Can perform math including algebra and basic trigonometry., • Can fully read and understand welding procedures., • Can communicate and job instructions and direct fitter helper with project assignments, • Maintain an impeccable attendance record with ability to work rotating shifts, overtime, and/or weekends as necessary, • Demonstrates teamwork and the ability to work effectively with coworkers, supervisors, managers, customers, third party representatives and others as required., • Perform all tasks in a safe and responsible manner in accordance with company safety and quality policies., • Trains and mentors lower-level employees, • Can act as Team Leader in day-to-day operations when needed., • Follow daily procedures and protocols as provided in job orientations and trainings., • Understands and drives company objectives to the team members Company Benefits: • Competitive compensation with eligibility for Bonus and Profit Sharing, • 401(k) retirement plan with Employer Match and Discretionary Quarterly Basic Contributions, • Paid Time Off, • Affordable health care, dental, and vision plans with eligibility upon hire date, • Healthcare FSA and Dependent care FSA, • Company-Paid Life, AD&D, and disability benefits Ellwood Technical Welding (previously known as C&J Cladding LLC) is an Equal Employment Opportunity/Affirmative Action Employer. Minorities/Females/Individuals with Disabilities/Protected Veterans.

Summary A Master Welder is a top-tier welding professional with deep, proven expertise across all welding processes. This individual not only meets, but exceeds the highest standards required of a Fabrication Welder. With multiple advanced qualifications in each process, the Master Welder brings exceptional craftsmanship, consistency, and technical precision to every project. A Master Welder will support company goals through outstanding productivity and quality, actively seek opportunities to improve workflows, and help guide & lead others through actions, not words. Reliability is a hallmark of this role, impeccable attendance, strong professionalism, and a clean disciplinary record are essential. Education and Experience • High School Diploma or equivalent is preferred, not required., • Vocational diploma or training in welding a plus not required, • Experience welding with exotic materials, • Minimum 5 years' experience to be eligible for this role Essential Functions Essential functions, as defined under the American with Disabilities Act, may include the following tasks, knowledge, skills, and other characteristics. This list of tasks is illustrative ONLY and is not comprehensive listing of all function and tasks performed by position in this class. It does not imply that all positions within the class perform all of the duties listed, nor does it necessarily list all possible duties that may be assigned. This listing is subject to change at any time and additional responsibilities can be added as business conditions require. • Have mastered and have excellent proven understanding of all of the processes performed by ETW., • This includes passing weld qualification tests for the following but is not limited to: GTAW, GTAW-P, Tri-Pulse, SMAW, SAW, PAW, GMAW or FCAW, • Ability to perform open root welding in fixed positions., • Ability to work with a variety of exotic materials (i.e.: Aluminum, Carbon Steel, Copper, Stainless Steel, etc.), • Leads the workforce on assigned shifts with a high focus on quality, • Takes ownership over the results of work performed and defines the requirements of work instructions, welding procedures and supervisor/team lead direction., • Always keep a neat and tidy work area. All tools to be neatly stored and kept in good condition., • Perform daily, weekly and monthly cleaning of both your area and other areas of the shop when assigned, this includes taking out trash, sweeping, mopping & straightening., • Grind, polish, wire wheel and prepare parts for welding as instructed., • Use cleaners to clean parts before welding., • Can read and understand blueprints and welding drawings to properly lay out parts., • Can perform math including algebra and basic trigonometry., • Can fully read and understand welding procedures., • Can communicate and job instructions and direct fitter helper with project assignments, • Maintain an impeccable attendance record with ability to work rotating shifts, overtime, and/or weekends as necessary, • Demonstrates teamwork and the ability to work effectively with coworkers, supervisors, managers, customers, third party representatives and others as required., • Perform all tasks in a safe and responsible manner in accordance with company safety and quality policies., • Trains and mentors lower-level employees, • Can act as Team Leader in day-to-day operations when needed., • Follow daily procedures and protocols as provided in job orientations and trainings., • Understands and drives company objectives to the team members Company Benefits: • Competitive compensation with eligibility for Bonus and Profit Sharing, • 401(k) retirement plan with Employer Match and Discretionary Quarterly Basic Contributions, • Paid Time Off, • Affordable health care, dental, and vision plans with eligibility upon hire date, • Healthcare FSA and Dependent care FSA, • Company-Paid Life, AD&D, and disability benefits Ellwood Technical Welding (previously known as C&J Cladding LLC) is an Equal Employment Opportunity/Affirmative Action Employer. Minorities/Females/Individuals with Disabilities/Protected Veterans.

Job DescriptionStructural Welder/Fitter Combo.Pay: $22-$28/hour. Location: Houston, TX . Job Type: Temp-to-Hire. Schedule: Mon-Fri | 6:00am - 4:30pm (Some Saturdays as needed). The Houston branch of Openwork has partnered with a local manufacturing company to add a Welder to their growing team. This is a great long-term opportunity for someone with welding experience seeking stability and a long-term career. What You'll Be Doing: • Print Interpretation & Layout: Read, interpret, and cross-reference complex engineering drawings, isometric sketches, cut sheets, and weld symbols to determine sequence of assembly and required tolerances ($\pm$ 1/16")., • Fitting & Assembly: Lay out, align, square, level, and tack weld beams, tubing, channels, angles, and base plates into rigid structural weldments using dogs, wedges, framing squares, jacks, and clamps., • Thermal Cutting & Joint Prep: Operate oxy-fuel torches, hand plasma cutters, carbon arc gouging rigs, and mag drills to cut, slot, cope, bevel, and prep weld joints according to WPS (Welding Procedure Specifications)., • Welding Operations: Deposit sound structural welds primarily using FCAW (Flux-Cored Arc Welding / Dual Shield, typically .045" or 1/16" wire) and GMAW (MIG), achieving full-penetration or fillet welds with minimal porosity, undercut, or spatter., • Quality & Dimensional Control: Inspect fit-up gaps, bevel angles, root openings, and overall frame diagonals before final welding; grind, dress, and stamp finished weldments for paint/galvanizing prep., • Safety & Maintenance: Keep work bays clean, perform daily inspections on welding leads and torch hoses, follow OSHA standards, and observe proper PPE rules (welding hoods, metatarsal/steel-toe boots, ear and eye protection). What We're Looking For: • 3+ years of Welding experience (Mig & Fluxcore)., • 3+ years of fitter experience., • Ability to lift up to 50 lbs., • Knowledge of shop safety in a manufacturing environment., • Knowledge of AWS D1 Standards., • Ability to pass a 3G open root test on 1" plate. Why Openwork?For more than 59 years, Openwork has connected talented people with leading employers. We offer competitive pay, weekly pay, opportunities for advancement, and a people-first approach to staffing. We connect driven individuals to long-term careers with reliable companies. Our Houston facility is part of a network of 19 manufacturing sites across 10 states.Apply today to start your next opportunity with Openwork! EOE – Openwork is an Equal Opportunity Employer.

Job Description Job description: This position is working at a Drilling Rig yard. Must be able to pass written test and field test Fitters 2: $29/hr Must be able to pass a written test and practical fit up during the interview (coping). 50-60 hrs a week 1st shift 6:30am-6:30pm Key Responsibilities • Read and interpret fabrication drawings and shop work orders with full accuracy., • Layout, position, fit, and secure parts/assemblies using tape measure, square, calipers, etc., • Create cut lists and prep materials correctly., • Safely operate welding/cutting equipment (cutting torch, track torch, magnetic drill)., • Tack weld using multiple processes; follow company welding procedures., • Mark/label parts with heat numbers, part numbers for traceability., • Receive, verify, store, and move materials (using hoist, forklift, or manual lifting)., • Provide ETA updates to foreman/supervisor for welded/prepped items., • Remove sharp edges/burrs; transfer finished parts to other departments., • Keep work area safe, clean, and organized., • Follow all safety rules, wear required PPE, and promote safe behavior., • Perform other duties as assigned. Required Skills & Abilities • Proficient with: tape measure, squares, hand tools, gouging tools., • Skilled with: cutting torch (hand cutting), magnetic drill (hole drilling), track torch (beveling)., • Safe operation of crane, hoist, and forklift., • Read/understand weld symbols, sizes, notes, grades, fractions, and decimals., • Perform complex weldment assemblies; assemble/disassemble components., • Qualified 1F or 1G welder per AWS standards., • Stay productive while strictly following safety guidelines. Physical Requirements • Lift/carry 50 lbs independently while walking on uneven surfaces., • Occasionally bend, stoop, kneel, twist, crawl., • Frequent use of hand/power tools (including heavy-duty ones)., • Clear vision (near/far) and good hearing to monitor work and detect issues., • Maintain spatial awareness in busy shop/yard with moving equipment., • Wear PPE at all times. Minimum Qualifications • 1F or 1G weld certified., • 5+ years relevant experience. Hiring Tests & Requirements • Pass written fitter proficiency test., • Pass physical fitting test (beam and pipe)., • Pass physical test from verbal instructions only.

Job Description Fitter / Welder – TIG & Flux Core Houston, TX, TX Manufacturing Description About U.S. Bellows U.S. Bellows, a division of Piping Technology & Products, Inc. (PT&P), is a leading manufacturer of engineered expansion joints and bellows for piping systems. Serving industries such as oil & gas, power generation, and chemical processing, U.S. Bellows is known for precision fabrication, quality workmanship, and reliable solutions that protect critical infrastructure. Position Summary The Fitter/Welder – TIG & Flux Core is responsible for fitting, aligning, and welding metallic bellows, expansion joints, and related components in accordance with engineered drawings, Welding Procedure Specifications (WPS), and applicable codes. This role requires strong fitting skills, proficiency in TIG and Flux Core welding, and a high level of attention to detail to produce high-quality, code-compliant assemblies. Key Responsibilities • Fit, assemble, and weld bellows and expansion joint components, including convolutions, pipe ends, flanges, liners, and hardware, • Read and interpret fabrication drawings, blueprints, weld symbols, tolerances, and specifications, • Perform proper fit-up for welding, including joint preparation, alignment, and root openings, • Weld using GTAW (TIG) and FCAW (Flux Core) in accordance with approved WPS, • Produce high-quality, multi-pass welds meeting ASME and customer requirements, • Measure, mark, cut, grind, and prepare materials for fabrication, • Maintain required preheat and interpass temperature controls when applicable, • Support and pass NDE inspections (PT, MT, RT, UT as required) and perform approved weld repairs, • Verify dimensional accuracy and alignment before and after welding, • Safely operate hand tools, power tools, fixtures, forklifts, and overhead cranes, • Complete travelers, weld logs, and traceability documentation, • Follow all safety, quality, and housekeeping standards Requirements Qualifications • High school diploma or GED required, • Must pass company-administered welding and fitting tests, • Must pass company-administered measuring tape skills test, • 3+ years of welding and fitting experience in a manufacturing or fabrication environment, • Proficient in TIG (GTAW) and Flux Core (FCAW) welding, • Experience welding carbon steel and stainless steel (Inconel a plus, if applicable), • Ability to read, write, and interpret fabrication drawings and production documentation in English, • Strong attention to detail, safety awareness, and teamwork skills, • Ability to work in a fast-paced, team-oriented manufacturing environment Physical Requirements • Ability to stand for prolonged periods (8+ hours), • Ability to lift, push, pull, or carry up to 50 lbs independently, • Frequent bending, stooping, reaching, and manual handling of materials, • Good hand-eye coordination and manual dexterity, • Visual acuity to read measuring tools, drawings, and identify weld or fit-up defects, • Ability to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection, • Must pass initial and ongoing occupational health screenings as required Work Environment Manufacturing shop environment with exposure to moving mechanical parts, sharp materials, heat, dust, and moderate to loud noise. Work schedules may include overtime or weekend shifts based on production demands. Company DescriptionPT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficientlyPT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently

Job DescriptionStructural FitterPay: $21-$26/hour Location: Houston, TX Job Type: Temp-to-Hire Schedule: Mon-Fri | 6:00am - 4:30pm (Some Saturdays as needed) The Houston branch of Openwork has partnered with a local manufacturing company to add a Structural Fitter to their growing team. This is a great long-term opportunity for someone with welding experience seeking stability and a long-term career. What You'll Be Doing: • Blueprint Reading & Layout: Read and interpret detailed blueprints, shop drawings, diagrams, and engineering specifications to determine fitting sequence, weld joints, and dimensional tolerances., • Component Fitting & Assembly: Perform layout, cutting, burning, tacking, and alignment of structural steel shapes (beams, channels, angles, plates) and modular skids using clamps, jacks, squares, and measuring devices., • Cutting & Preparation: Operate cutting torches, plasma cutters, carbon arc gouging equipment, band saws, and pipe bevelers to contour, bevel, and prepare joints to code., • Welding Operations: Weld carbon steel assemblies to AWS D1.1 structural standards using GMAW (MIG) and FCAW (Flux-Core) processes., • Material Handling & Rigging: Safely rig components and operate shop overhead cranes and jib cranes to move and position heavy weldments., • Finishing & Quality Control: Use pneumatic and electric angle grinders, wire wheels, and drills to clean spatter, prep surfaces, and ensure parts meet strict dimensional criteria., • Shop Safety: Comply with OSHA regulations, company standard operating procedures (SOPs), and proper personal protective equipment (PPE) protocols. What We're Looking For: • 3+ years of structural fitter experience., • Ability to lift up to 50 lbs., • Knowledge of shop safety in a manufacturing environment., • Knowledge of AWS D1 Standards. Why Openwork?For more than 59 years, Openwork has connected talented people with leading employers. We offer competitive pay, weekly pay, opportunities for advancement, and a people-first approach to staffing. We connect driven individuals to long-term careers with reliable companies. Our Houston facility is part of a network of 19 manufacturing sites across 10 states.Apply today to start your next opportunity with Openwork!EOE – Openwork is an Equal Opportunity Employer.

Job Description Fitter Welder Compensation: $26.00 - $38.00/hourly Night Shift: 15% Differential. Relocation Information: Colorado Candidates under 100 miles: $2,000 Sign On Bonus Colorado Candidates over 100 miles: $5,000 Relocation Out-of-state Candidates: $11,000 Relocation package Interested in applying for RK? Get a firsthand look at life in our manufacturing facility. Take a Look Inside RK's Henderson Shops Hear directly from our team and see what a typical day on the job looks like. Learn about the work, culture, expectations, and opportunities that make RK a great place to build your career. RK Company Overview RK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Position Summary Performs the full range of welding tasks required in the fabrication of structural and miscellaneous metal components. Welders are responsible for interpreting blueprints, operating trade-specific machinery, and executing quality welds in accordance with project specifications and safety standards. This position is classified into Welder 1, Welder 2, or Welder 3 based on certifications, experience, and demonstrated capabilities. Role Responsibilities • Must be able to pass 3G/ FCAW, 1G/ GMAW- MC and 3G/ GMAW-SC, • Produce high-quality products in accordance with established standards and procedures., • Read and interpret labels, job orders, and drawings to determine appropriate equipment and sequence of operations., • Inspect products for compliance and document results; maintain equipment as required., • Work collaboratively with team members to meet production schedules and performance goals., • Operate lift trucks and overhead cranes safely and efficiently., • Accurately use measuring tools, including tape measures., • Adhere to all safety protocols and shop regulations., • Support continuous improvement efforts through Lean and Six Sigma practices., • Perform other duties as assigned. Qualifications Fitter 1, • High school diploma or equivalent; technical education or certification is a plus., • 3-5 years of experience in welding and metal processing (FCAW, MIG)., • Strong mechanical aptitude and ability to successfully operate proven fixtures., • Perform duties that are generally structured and recurring in nature., • Follow established objectives, guidelines, and standard operating procedures., • Demonstrate strong mechanical aptitude and proficiency in operating established fixtures and tools., • Demonstrate excellent problem-solving skills and can work independently when required, • Maintain high attention to detail and precision., • Contribute effectively to a team under the general supervision of an experienced professional or manager., • Read and interpret process sheets, cut lists, tolerances, and basic technical drawings/blueprints., • Perform intermediate-level mathematical calculations as needed for the role Fitter 2: All of the above plus:, • 5-10 years of experience in welding, metal processing, and structural fitting., • Fit beams, columns and misc. metals, • Demonstrate sound judgment and take initiative in troubleshooting and recommend effective solutions., • Provide mentorship and guidance to junior fitters., • Proficient in reading technical documents and blueprints., • Perform intermediate-level mathematical calculations including trigonometry and geometry., • Demonstrate an understanding of continuous improvement initiatives and actively participate in Lean and Continuous Improvement process enhancements. Fitter 3: All of the above plus:, • 10+ years of experience in welding, metal processing, and structural fitting. Certified in SMAW, FCAW, GMAW (all positions). Experience in COBOT programming. Experience in AutoCAD. Design and build semi-automated fixtures. Design and setup fitting and welding assembly lines. Fit complex curving of rails, stairs and canopies. Design immediate fixtures. Skilled in welding in confined spaces using mirrors. Fully program welding robots and operate AutoCAD. Advanced mechanical aptitude to coordinate own tasks with a specific range of responsibilities under established procedures. Operate independently with minimal supervision. Read advanced technical documents and blueprints. Perform advanced-level mathematical calculations including trigonometry and geometry. Manage individual responsibilities within defined parameters, ensuring alignment with established processes. Collaborate with the shop foreman to ensure production targets are achieved efficiently and on schedule. Communicate job status to shop superintendent. Read blueprints with ISO, European standards and raw contract drawings. Skilled in hand drafting and sketches. Lead small teams and contribute to advanced complexity continuous improvement initiatives, including Lean and Continuous Improvement projects Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch. Work in all types of weather. Lift, move, and/or carry up to 50 lbs. Working knowledge of all trade materials and tools. Comply with all company policies and procedures. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. RK Mechanical employees and subcontractors must meet safety system requirements, including RK Orientation, CPR/First Aid/AED/Bloodborne Pathogens, Hazard Identification, and OSHA 10. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis.

Job Description Structural Fitter Location: Houston, TX Pay: $25.00–$30.00 per hour, depending on experience Night Shift Differential: Additional 10% for night shift hours Position Summary Apache Workforce is seeking an experienced Structural Fitter for a manufacturing and fabrication environment. This position involves fitting, aligning, cutting, and preparing structural components for welding and assembly. The ideal candidate will have experience reading fabrication drawings, working with structural materials, using measuring and layout tools, and preparing components for welding. Candidates should be comfortable working with hand and power tools and following established safety procedures. Responsibilities • Read and follow blueprints, fabrication drawings, and work instructions., • Measure and lay out materials according to project specifications.Prepare materials and joints for welding and fabrication., • Cut, fit, align, and tack structural components., • Check dimensions, fit-up, and alignment using appropriate measuring tools., • Prepare materials for welding, including grinding and beveling as needed., • Operate cutting equipment and torches safely.Use hand tools, power tools, and fabrication equipment as required., • Complete required production and inspection documentation., • Communicate with welders, supervisors, inspectors, and other team members., • Maintain an organized work area and follow applicable safety procedures., • Perform additional job-related duties as assigned Qualifications • Experience in structural fitting, fabrication, or a related manufacturing environment., • Ability to read and understand blueprints and fabrication drawings., • Familiarity with structural shapes, materials, and fabrication processes., • Basic welding and tack-welding knowledge., • Ability to use measuring, layout, and hand tools., • Experience with cutting, grinding, and beveling materials., • Ability to safely operate torches and related equipment., • Basic math and measurement skills., • Strong attention to detail., • Ability to communicate effectively with team members and supervisors. Education & Experience • High school diploma or equivalent preferred., • 5+ years of related structural fitting or fabrication experience preferred. Equivalent combinations of relevant training and experience may be considered. Work Environment & Physical Requirements This position is performed in a manufacturing shop environment that may not be climate controlled. The position may require employees to: • Stand and walk for extended periods during the workday., • Bend, reach, twist, kneel, crouch, and work in various positions., • Use hand and power tools throughout the workday., • Work around fabrication equipment, noise, heat, and other typical manufacturing conditions., • Lift and move materials weighing up to approximately 50 pounds., • Carry, push, or pull materials short distances as needed., • Climb ladders or steps when required for job duties., • Perform tasks requiring hand-eye coordination and accurate measurement. Safety & PPE Employees are expected to follow all applicable workplace safety procedures and use required PPE. Typical PPE may include: • Steel-toe boots, • Safety glasses, • Hard hat, • Additional PPE based on assigned work and work area

Job Description Structural Fitter At SteelCon Inc., we build the future of America's infrastructure with cutting-edge steel fabrication and structural solutions. From power to progress, we deliver unmatched quality and reliability-one project, one partnership, and one employee at a time. We live by our core values: Excellence, Responsibility, Innovation, and Teamwork. These values fuel our success and create a dynamic environment where our employees grow and thrive. With a commitment to career development, advancement opportunities, and employee well-being, SteelCon is the place where your hard work turns into long-term success. Scope of Responsibility: This position involves fabricating and assembling structural steel components using prescribed procedures, industry standards, and detailed drawings. Employees must complete SteelCon's Welder & Fabricator Training Program. Primary Purpose of this Position: Fit steel parts for structural, plate, and misc. steel assemblies per shop drawings and quality requirements. Essential Job Functions: • Planning, laying out, and fitting metal components, such as plate stiffeners, stiffened panels, bulkheads, and frames using blueprints or templates and tools while maintaining alignment tolerances., • Locating and marking reference lines, such as center, buttock, and frame lines., • Alignment of parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Setting, fitting, and erecting of structural assemblies and modules within alignment tolerances., • Installing structural foundations and outfit items such as doors, hatches, brackets, and clips., • May tack weld panels, bulkhead, assemblies, clips, and brackets., • May roll, bend, flange, cut, and shape plates, beams, and other metal parts using shop machinery, such as ironworkers, plate rolls, presses, and press brakes., • Ability to follow instructions, written and/or verbal, with little or no supervision., • Performing other related job duties as assigned in a safe and efficient manner; also, please see physical requirements., • Other typical duties performed by a fitter. Qualifications Knowledge, Skills, and Abilities: • Ability to read, write, and perform higher arithmetic computations involving addition, subtraction, multiplication, and division of whole numbers, decimals, and fractions., • Ability to understand and carry out semi-complicated verbal and written instructions., • Ability to effectively communicate with co-workers and managers., • Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion., • Skill in using tape measure or 1" rule., • Ability to maintain American Welding Society certification on 1-inch plate in flat position using the gas metal arc welding and flux-cored arc welding processes., • Ability to pass the fillet weld break test using the gas metal arc welding process., • Ability to pass a Steelcon Inc administered basic welding test that covers shop drawing interpretation, weld symbols, welding processes, weld process symbol interpretation and application, and a visual acuity test., • Ability to pass a Steelcon Inc administered fitting test that covers shop drawing interpretation, fractional number calculations, basic geometry, etc., • Ability to interpret, understand, and utilize cutting lists, shop orders, and shop drawings., • Ability to operate a cutting torch to meet American Welding Society specifications., • Ability to possess pride in own workmanship, demonstrate attention to detail, and work safely., • Ability to operate forklifts, jib hoists, and overhead cranes in a safe and proper manner. Use and understand industry and Steelcon Inc adopted hand signals used for crane operations., • Ability to adjust welder to insure proper feed rate and temperature., • Ability to multitask. Physical Demands: • Stand CONTINUOUSLY over the course of the 8-to-12-hour work shift., • Walk CONTINUOUSLY over the course of the 8-to-12-hour work shift. The distances walked will range from a distance of a few feet to 60-foot length of a steel beam., • Sit only during the break and lunch periods. Rarely one will be able to sit while welding., • Lift weights up to 20 pounds from floor to chest CONTINUOUSLY, which includes the various tools utilized in the process of performing the usual work duties., • Lift weights up to 35 pounds from floor to waist FREQUENTLY, during the 10 to 12 during the work shift., • Lift weights up to 85 pounds from floor to waist OCCASIONALLY, during the 10 to 12 during the work shift. Jib cranes and overhead cranes are available for the employee's assistance with lifting., • Carry weights noted above distances ranging from a few feet to the 60-feet length of the steel beam., • Push and pull drawers open and closed OCCASIONALLY to FREQUENTLY to retrieve tools. An employee will OCCASIONALLY push a beam attached to a jib crane or overhead crane to properly guide into place. Force varies up to 35 pounds., • Climb OCCASIONALLY onto beams stacked on sawhorses to guide into place. An employee will OCCASIONALLY climb a ladder of 6 to 10 feet while performing job duties., • Stoop or crouch on an OCCASIONAL to FREQUENT basis while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job., • Kneel in the commission of job duties on an OCCASIONAL to FREQUENT basis, depending upon the job. The position will be held continuously for a few minutes to 15 minutes., • Crawl RARELY under a beam to reach the opposite side. The distance crawled is less than 3 feet., • Reach forward CONTINUOUSLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension., • Reach overhead OCCASIONALLY to guide a beam attached to the cranes and to attach the chains from the crane to the beams or to weld while underneath the beam., • Balance OCCASIONALLY to climb ladders and to walk on steel beams. An employee will not be working at unprotected heights., • Gross finger dexterity skills to operate the various tools and equipment utilized in the course of standard job duties. A trigger squeeze motion is required to operate the grinders. Fine finger dexterity is not required. Non-Material Handling Demands • Employee is expected to work 40 hours a week. However, hours including overtime and weekends may be required based Steelcon Inc needs., • Hear sufficiently to be aware of safety issues., • Visual ability to read and interpret cut lists and shop drawings. Safety glasses are required in the shop area., • Exposure to heat, cold, wet, and humid conditions in the shop area OCCASIONALLY., • Exposure to fumes, odors, and dust in the shop area OCCASIONALLY., • Exposure to solvents, greases, oils, and coolants OCCASIONALLY., • Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats. Tools Required: Square, Tape Measure, Weld Lead, 4-inch grinder, 9-inch grinder, Ball Peen Hammer, Sledgehammer, Hand Torch, Wire Brushes, Chipping Hammers, Clamps, Stamping Taps, and Chains. Machines Utilized: Welder, Overhead Crane, Jib Crane, Pallets, Sawhorses, and Forklifts.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at http://cornerstonebuildingbrands.com. Job Description Base pay rate is $23.00 per hour Day Shift: 6:00AM - 2:30PM DUTIES AND RESPONSIBILITIES • Knows and understands all safety rules and precautions necessary for working in and about a manufacturing environment, • Responsible for coordination of welder settings, gun speed/travel and gas flow with the observed condition of bead, • Read a tape measure and blueprints to shop standard, • Decide when adjustment or gun manipulation needs to be altered, • Decide how much and what repairs to make for pin holes and burn-through caused by an auto welder, • Train and teach proper welding procedures in accordance with manufacturing job procedures, • Operate overhead crane and other lifting equipment, • Responsible for holding beads to specified shapes, sizes, and penetrations while maintaining the quality of the product, • Keeping numerical and alphabetical sequences correct, • Maintains continuous improvement practices in the work area, • May be assigned other projects and duties as designated by Team LeaderQualifications, • Associates degree or equivalent from a 2-year College or technical school; or (1) to three (3) years working experience in welding; or equivalent combination of education and experience as a welder/fitter in the manufacturing industry, • Read blueprints and drawings, • Read and comprehend documents including but not limited to policy manuals, safety rules/programs, operating and maintenance instructions, procedure manuals, and simple correspondence, • Ability to communicate information effectively one-on-one and in small group situations and settings is required, • Perform general mathematic calculations including but not limited to addition, subtraction, multiplication, fractions, percentages, and division, • Required to use power hand tools, • Required to drive a forklift, • Ability to work effectively to meet deadlines, • Read different measuring devices (i.e. tape measure, protractor, micrometer), • Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist Additional Information Site Address: 7301 Fairview Street, Houston, TX 77041 This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionPipe Fitter Location: Brookshire, TX Houston Area Pay: $23.00 - $34.00 per hour DOE Status: Temp-to-Hire Schedule: Monday-Friday, approximately 7:00 AM start time Overtime: Approximately 60 hours per week, with occasional Saturdays required Recruiting Company: DIHO Consulting USA LLC Job Overview DIHO Consulting USA LLC is currently recruiting experienced Pipe Fitters/Fabricators for a growing industrial fabrication facility in the Brookshire, TX area. This is a long-term, temp-to-hire opportunity for skilled professionals with pipe fabrication experience in a production shop environment. The ideal candidate will be capable of independently reading fabrication drawings, performing complex fit-ups, preparing assemblies for welding, and maintaining high-quality workmanship while meeting production goals. Essential Responsibilities • Read and interpret piping isometrics and spool drawings., • Perform pipe-to-pipe and pipe-to-flange fit-up., • Measure, lay out, and assemble piping systems according to specifications., • Install and align flanges, reducers, tees, and branch connections., • Verify flange orientation and bolt-hole alignment., • Maintain proper root openings and minimize high-low conditions., • Prepare joints for GTAW/TIG welding operations., • Fabricate carbon steel and stainless steel piping assemblies., • Verify dimensions and fabrication tolerances., • Support material traceability requirements., • Prepare assemblies for automated and robotic welding processes., • Work safely and efficiently in a fast-paced fabrication environment. Qualifications, • Previous Pipe Fitter experience in a fabrication shop., • Ability to read and interpret isometric and spool drawings., • Experience with carbon steel and/or stainless steel fabrication., • Knowledge of fit-up procedures, root opening, high-low, and flange alignment., • Experience preparing assemblies for welding operations., • Strong attention to detail and quality workmanship., • Reliable transportation and dependable attendance., • Willingness to work overtime and occasional Saturdays. Preferred Qualifications, • Stainless steel fabrication experience., • GTAW/TIG joint preparation experience., • Tack welding experience., • Experience supporting robotic or automated welding operations. Why Apply?, • Competitive pay based on experience, • Long-term opportunity, • Consistent overtime available, • Stable shop environment, • Career growth potential, • Immediate openings available

Job DescriptionDescription: About U.S. Bellows U.S. Bellows, a division of Piping Technology & Products, Inc. (PT&P), is a leading manufacturer of engineered expansion joints and bellows for piping systems. Serving industries such as oil & gas, power generation, and chemical processing, U.S. Bellows is known for precision fabrication, quality workmanship, and reliable solutions that protect critical infrastructure. Position Summary The Fitter/Welder – TIG & Flux Core is responsible for fitting, aligning, and welding metallic bellows, expansion joints, and related components in accordance with engineered drawings, Welding Procedure Specifications (WPS), and applicable codes. This role requires strong fitting skills, proficiency in TIG and Flux Core welding, and a high level of attention to detail to produce high-quality, code-compliant assemblies. Key Responsibilities • Fit, assemble, and weld bellows and expansion joint components, including convolutions, pipe ends, flanges, liners, and hardware, • Read and interpret fabrication drawings, blueprints, weld symbols, tolerances, and specifications, • Perform proper fit-up for welding, including joint preparation, alignment, and root openings, • Weld using GTAW (TIG) and FCAW (Flux Core) in accordance with approved WPS, • Produce high-quality, multi-pass welds meeting ASME and customer requirements, • Measure, mark, cut, grind, and prepare materials for fabrication, • Maintain required preheat and interpass temperature controls when applicable, • Support and pass NDE inspections (PT, MT, RT, UT as required) and perform approved weld repairs, • Verify dimensional accuracy and alignment before and after welding, • Safely operate hand tools, power tools, fixtures, forklifts, and overhead cranes, • Complete travelers, weld logs, and traceability documentation, • Follow all safety, quality, and housekeeping standardsRequirements: Qualifications • High school diploma or GED required, • Must pass company-administered welding and fitting tests, • Must pass company-administered measuring tape skills test, • 3+ years of welding and fitting experience in a manufacturing or fabrication environment, • Proficient in TIG (GTAW) and Flux Core (FCAW) welding, • Experience welding carbon steel and stainless steel (Inconel a plus, if applicable), • Ability to read, write, and interpret fabrication drawings and production documentation in English, • Strong attention to detail, safety awareness, and teamwork skills, • Ability to work in a fast-paced, team-oriented manufacturing environment Physical Requirements • Ability to stand for prolonged periods (8+ hours), • Ability to lift, push, pull, or carry up to 50 lbs independently, • Frequent bending, stooping, reaching, and manual handling of materials, • Good hand-eye coordination and manual dexterity, • Visual acuity to read measuring tools, drawings, and identify weld or fit-up defects, • Ability to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection, • Must pass initial and ongoing occupational health screenings as required Work Environment Manufacturing shop environment with exposure to moving mechanical parts, sharp materials, heat, dust, and moderate to loud noise. Work schedules may include overtime or weekend shifts based on production demands.

Job Description Job Type: Full Time Job Location: Houston Spitzer, a recognized industry leader in designing and fabricating high-specification equipment, is currently seeking a Structural Fitter to join our team! What Does a Week in the Life of the Structural Fitter Look Like? • Understand and follow safety policies and procedures at the shop., • Fit structural frameworks from materials to fabricate products according to layouts, drawings, or work order., • Read blueprints and identify material sizes., • Lay out, position, align and secure parts and assemblies prior to assembling, using straight edges, combination squares, calipers, and rulers., • Cut, contour and bevel metal plates and structural shapes to dimensions as specified by blueprints., • Check grooves, angles, or gap allowances, using calipers and precision measuring instruments., • Burn, measure, and tack weld to correctly assemble multiple parts of steel per detailed drawings., • Operate overhead cranes., • Practices good housekeeping skills and properly disposes of waste according to safety and environmental policies., • Other duties as assigned by the Supervisor/Manager. Skills (to Pay the Bills) Here's a list of a few competencies that the Structural Fitter at Spitzer should have… • Three plus years of structural fitting experience and demonstrated ability to perform advanced skills with minimum supervision according to testing requirements., • Must have verbal skills with fluency for the responsibilities assigned. What's it like to be a part of the Spitzer Family? Spitzer is a fast-paced company that focuses on exceeding our customers’ expectations on every project. We believe we provide exceptional value through the quality of our work, our commitment to safety and by delivering products on schedule. You'll find a unique team of individuals who continue to push the boundaries of what is possible. A diverse team, a great culture, and a positive work environment are just some of the things that make working at Spitzer so rewarding. Employee Driven Benefits At Spitzer, we take pride in listening to what our employees want in benefits. We've come up with a unique set of employee benefits and designed them around our culture. • Health Care Insurance (multiple plans to choose from!), • Dental Benefit options, • 401k plan with Employer Matching, • Disability Insurance, • Paid Time Off that begins accruing your first day of employment., • Eight paid company holidays, • Plenty of Overtime Opportunities!, • Tuition Reimbursement Program, • Employee Discounts with LifeMart!! Oh, and $alary Of course, we didn't forget salary… Spitzer offers competitive pay depending on education, certifications, and experience. Work Schedule Spitzer currently runs two shifts, Monday through Friday with overtime on weekend work as needed. Late afternoon/evening/weekend hours may be required as needed. Work schedules may change to accommodate production needs. Application Process If this sounds like a great opportunity to you, follow the steps below: • Visit our website to apply to complete Online Application, • Apply in Person at one of our locations:, • Waterfront Division: 13863 Industrial Road, Houston, TX 77015 We look forward to hearing from you!

Job Specifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Summary Instrument Fitter supports the fabrication and assembly of all products and parts that are within ATS Technical Services Group. This is both in Houston and all offsite locations. This person will be responsible for the adherence of the project management plan which includes assembly, bending, quality checks, safety, and delivering per schedule. Duties/Responsibilities • Support Quality Assurance plan and follow Quality Check Points., • Provide feedback with schedule, lessons learned, risk, and assembly plans., • Collaborates with team to ensure continuous improvement., • Professionally communicate with fellow co workers and valued partners., • Collaborate with generating JSAs., • Collaborate and proactively follow 5s in both Houston Shop and outside., • Understand how to read and interpret schematics., • Inventory materials, tooling, and components prior to kick off., • Able to bend the assigned number of lines per day., • Follow schematic notes to bend & assemble a qualitative product and avoid rework., • Aid with generating tool list and material list for projects., • Gather tooling per the tooling kick off list., • Aid with monitoring calibration and maintenance plans for machines., • Complete the MRB documentation as project is in progress., • Accurately completes labor tickets, expenses, and submits on due date., • Use crane to move components., • Ability to work on numerous projects at once., • Assist welders with welding., • Support the monitoring and execution of a project., • Assist with reviewing and managing NDE, • Drill on frames and fabricate brackets., • Pickle and Passivate tubing., • Follow and complete Final Inspection Document., • Provide part numbers for components needed. complete day to day activities of assigned areas and projects, • communication with all levels of management, engineering and clients, • tasks may include operation of cranes, forklift, general housekeeping, assisting with weld setup and equipment mobilization/demobilization, • meet assigned project timelines, • other duties as assigned Required Abilities • Execute project per predefined schedule., • Provide daily updates per the milestones., • Demonstrate ability to use a hydraulic bender and hand bender., • Demonstrate ability to use both hand C&T tools and C&T machine., • Follow a route plan with and without racks., • Communicate professionally with coworkers and customers verbally and in writing., • Complete a JSA, monitor safety within team, and provide risk to avoid incidents., • Able to identify and differentiate between Low Pressure, JIC, MP, and HP components., • Able to measure and use mathematical equations to bend tubing., • Ability to bend tubing from to 1.5 with hand tools, HB Bender, and/or One Shot., • Demonstrate ability to prep tubing to avoid contamination and prepare for either tie in with fittings and or welding. Education / Experience • High School / GED preferred, • 5+ years of Subsea or Space Experience, • ability to travel on short notice for extended periods, • self-motivated with high level of initiative, • ability to work with minimal supervision, • problem solving skills, • written and verbal communication skills in English Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Standing for prolong periods of time., • Climb up and down ladder numerous times a day., • Work in small spaces., • Able to work outside in various climates., • Ability to use numerous tools for 8 to 12 hours a day while performing these duties., • Frequently required to reach with hands/arms and talk or hear, • Required to stand, walk, sit, and use hands to finger, handle, or feel objects, tools, or controls, • Must occasionally lift and/or move up to 70 pounds, • Reasonable visual acuity for the work performed Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to noisy with periods of intense sound. • non-temperature controlled environment, • moderate to noisy environment with periods of intense sound Disclaimer: The information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. An Equal Opportunity Employer An E-Verify Employer Un Empleador de E_Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Spitzer, a recognized industry leader in designing and fabricating high-specification equipment, is currently seeking Vessel Fitters to join our team. Understand and follow safety policies and procedures of the shop. Conforms to shop quality practices and procedures. Interprets drawing and specifications to determine best sequence of fabrication. Uses MIG & flux core welding processes to tack. Tack Carbon steel and/or Stainless-steel components using weld procedures. Fit up nozzles & couplings according to the outside projections and angle. Layout & cut baffle plates, openings to fit nozzle & couplings to head based on drawing specifications. Fit-up Internals subassembly for pressure vessels and Fit-up internal assembly into the required shell. Checks fit ups of other welders using appropriate tools. Uses flame cutting torch, carbon arc gouging, plasma arc, portable grinders and other tools. Works productively with others to help determine best solutions. Uses overhead cranes, jib cranes and other lifting/rigging devices to move components in a safe manner is a plus. Other duties as assigned by the Foreman. Here's a list of a few competencies that the Vessel Fitter at Spitzer should have Ability to follow shop procedures, quality procedures and safely practices. Must have verbal skills with fluency for the responsibilities assigned. Requires 5+ years of pressure vessel shop fabrication experience. Proficient in basic math including addition/subtraction of whole numbers, fractions and decimals. Proficient in reading a tape measure / ruler in increments of 1/16" or smaller. Ability to calculate degrees and circumference using basic algebra and geometry Ability to read and understand engineering drawings. Ability to understand manufacturing sequence in a vessel fabrication shop. Ability to use various welding, grinding and fitting tools. Must be able to perform 3G weld test. Ability to lift materials job components up to 30 pounds. Experience in fabricating large vessels / towers as well as smaller vessels carbon steel or stainless steel. Spitzer is a fast-paced company that focuses on exceeding our customers' expectations on every project. We believe we provide exceptional value through the quality of our work, our commitment to safety and by delivering products on schedule. You'll find a unique team of individuals who continue to push the boundaries of what is possible. A diverse team, a great culture, and a positive work environment are just some of the things that make working at Spitzer so rewarding. At Spitzer, we take pride in listening to what our employees want in benefits. We've come up with a unique set of employee benefits and designed them around our culture. Health Care Insurance (multiple plans to choose from!) Dental Benefit options 401k plan Disability Insurance Paid Time Off that begins accruing your first day of employment Eight paid company holidays Plenty of Overtime Opportunities! Tuition Reimbursement Program Employee Discounts with LifeMart!! Of course, we didn't forget salary Spitzer offers competitive pay depending on education, certifications, and experience. Spitzer currently runs two shifts, Monday through Friday with overtime on weekend work as needed. Late afternoon/evening/weekend hours may be required as needed. Work schedules may change to accommodate production needs. If this sounds like a great opportunity to you, follow the steps below: Visit our website to apply to complete Online Application Apply in Person at one of our locations: • Fisher Division: 10543 Fisher Rd. Houston, TX 77041 We look forward to hearing from you!

Genesis is looking for motivated, dependable Structural Fabrication Fitters to join our clients team working on the shop floor. This is NOT a role for Pipe WELDERS - Only FAB SHOP STRUCTURAL FITTERS will be considered.

Apply shop mathematics to solve problems- Plan work and select proper tools. Heavy industrial fabrication shop or job site environment.

Qualifications: High school diploma or GED (preferred) Minimum 23 years of experience in heavy steel fabrication or vessel fitting Ability to read and interpret detailed fabrication drawings and welding symbols Familiarity with ASME Section VIII and pressure vessel standards Experience using industr

The Structural Fitter fits and assembles structural framework, components and materials such as angle iron, I-beams and other steel components within our Englobal Fabrication and Instrumentation and Electrical (I&E) Integration Shop. Must be able to pass a structural fitter test (45 degree cut out I

PrideStaff - 574821 [Material Handler / Freight Handler] As a Shop Helper at PrideStaff, you'll: Assist in assembly and warehouse duties; Perform mechanical assembly, packaging inventory and equipment maintenance as directed; Perform warehouse/shipping and receiving duties.

To accomplish this, we cut, bend, and weld aluminum sheet and parts, in a fast paced shop-like manufacturing environment. Comfortable operating common metal shop equipment and hand tools (sheers, breaks, cutting tools, straightedge, square, ruler, caliper, etc.

If you are a Pipefitter and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career!. OR completion of a recognized pipefitter apprenticeship, OR equivalent military experience. UA, NCCER, or equivalent

Experience operating shop equipment such as lathes, drill presses, mills, and related machinery. Inspect shop equipment regularly for functionality and damage.

Maintenance Technician - 2nd Shift.The primary opening is on second shift, with first-shift opportunities also available.Our client, a longstanding family-owned, values-based manufacturer is seeking a Maintenance Technician to join its growing maintenance team.This onsite position is ideal for a han

Core & Main - - Responsibilities: Examines specifications of the customer’s order using drawings, work orders, or blueprints to determine the characteristics of the finished item, materials to be used, and machine setup requirements.Fabricates work piece as determined by work order specifications

Tradesmen International - - Responsibilities: Read and interpret blueprints, ISOs, and specifications; Fabricate and install screw pipe, socket weld pipe, and various tubing; Install valves, pipe hangers and supports; rig for piping work; Test piping systems and perform leak tests; Oxy-fuel cutting

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido.Somos profesionales

Tradesmen International - - Responsibilities: Install large-bore industrial piping per drawings/specs; Read isometric/spool/P&ID drawings; Install valves, hangers, supports, and pipe racks; Support hydro/pneumatic tests and leak repair; Follow LOTO, PPE and permit rules.

Morada Senior Living - 4620 Bellaire Boulevard - Responsibilities: Assist with maintaining a safe, clean and comfortable environment for residents, guests and team members; Perform routine maintenance on grounds, buildings, equipment and vehicles; Execute basic plumbing, electrical, HVAC, and applia

GreyStar - - Responsibilities: Process maintenance work orders and repairs per policies and codes; Complete make-ready process for vacant units; Manage materials inventory and supplier coordination; Document service requests accurately; Maintain grounds and perform cleaning/painting as needed.

Lifetime Fitness - - Responsibilities: Maintenance and repairs of millwork, plumbing, lighting, pool systems, laundry equipment; Verify temperatures, pressures and chemistry meet requirements; Respond to and prioritize repair requests; emergency repairs; Record maintenance activity in maintenance t

GreyStar - - Responsibilities: Complete work orders and preventative maintenance on the property; Complete make-ready process for vacant apartments; Track inventory and reorder supplies; Document service work for tracking and reporting; Assist in grounds, cleaning, and painting as needed.

Koch - - Responsibilities: Read and interpret isometric drawings and piping layouts; Install, assemble, maintain piping systems in an industrial facility; Perform steam tracing and small-bore tubing installation; Inspect finished work for alignment and quality; Follow site safety procedures and ove

GreyStar - - Responsibilities: Respond to resident service requests and perform repairs; Complete make-ready inspections and coordinate vendors; Track inventory and maintain tools and supplies; Complete documentation for service requests; Maintain grounds and common areas including cleaning and pai

Worley - - Responsibilities: Read and interpret blueprints, ISO�s, filed installations, material takeoffs, field sketches, and understand specifications; Fabricate and install screw pipe, socket weld pipe, stainless tubing, carbon steel weld pipe, stainless steel weld pipe; Miter and fabricate al

GreyStar - - Responsibilities: Complete work orders and preventative maintenance on the property; Make-ready vacant units for leasing and move-ins; Track inventory and reorder supplies; Document service requests accurately; Assist in grounds/common areas maintenance and painting.

Sligan Plastics - - Responsibilities: Troubleshoot equipment; Perform PMs without supervision; Read electrical and hydraulic schematics; Read PLC programs; Follow GMP and safety policies.