Software testing jobs in Edison, New Jersey - Page 2Create job alerts

Job DescriptionSalary: $70k-85k Position Overview The Field Engineer is a critical member of our growing Engineering department at GRA Design Studio, responsible for performing detailed on-site investigations that support project feasibility, engineering decisions, and design development. This role focuses primarily on conducting MEP-focused engineering site surveys, capturing existing conditions, and identifying system-related constraints. The Field Engineer will also support due diligence analysis based on field observations and assist with production work as needed to ensure project continuity and team flexibility. Key Responsibilities MEP-Focused Site Surveys & Field Assessments * • Conduct thorough on-site MEP field surveys, documenting existing mechanical, electrical, plumbing, fire protection, and related building systems., • Capture accurate measurements, field notes, and photographic documentation to support engineering and architectural teams., • Identify system deficiencies, capacity considerations, code-related issues, and potential design or construction challenges., • Coordinate site access, interact with building personnel, and ensure all field data is collected safely and efficiently. Due Diligence & Analysis * • Perform due diligence evaluations informed by on-site observations, focusing on system conditions, risks, and feasibility., • Prepare clear and concise due diligence reports summarizing findings, system impacts, and recommendations., • Assist in verifying compliance with applicable codes and standards related to MEP systems and existing building conditions., • Communicate findings to internal engineering and design teams to support scoping, planning, and decision-making. Production & Project Support * • Drafting, documentation updates, and production tasks in AutoCAD, Revit, and other software., • Incorporate field findings into engineering drawings, coordination sets, and project documents., • Support engineers and architects with redlines, revisions, and project coordination., • Provide flexibility across fieldwork, analysis, and production based on project workload and departmental needs. Qualifications * • Bachelors degree in Engineering, Architecture, Construction Management, or related field preferred., • 13 years of experience in field engineering, MEP surveys, construction, or similar technical roles., • Working knowledge of building MEP systems, existing facility evaluations, and construction processes., • Proficiency with field equipment, digital measuring tools, and drafting platforms (AutoCAD required; Revit a plus)., • Strong documentation skills and attention to detail in fast-paced field environments., • Ability to work independently at job sites and collaborate effectively with engineering, architectural, and project management teams., • Clear communication skills, with the ability to present technical findings to both technical and non-technical audiences. Core Competencies * • MEP Field Investigation, • Technical Assessment & Problem-Solving, • Time Management & Organization, • Clear Written & Verbal Communication, • Cross-Disciplinary Collaboration, • Adaptability & Flexibility Work Environment * • Frequent travel to project sites required., • Work may include indoor, outdoor, active construction, or existing facility environments., • Occasional office-based work for reporting, coordination, and production tasks. Benefits: * • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with up to 3% match), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. Job Summary: We are seeking an energetic, Mechanical Design Engineer with experience in Autocad and Revit design experience in our Warren, NJ office. The ideal candidate will have exceptional working knowledge of building design with emphasis on multifamily residential, and mixed -use high rise, hospitality and commercial. The Mechanical Design Engineer is responsible for performing various types of inspections, testing, and producing plans, specifications and reports for clients. This is a technical and managerial position that requires providing solutions and managing projects from start to finish, through all project phases ranging from feasibility studies and conceptual design, schematic design, construction documents and construction administration, bidding and project close-out. Lead small to medium scale HVAC projects and the roll out of mechanical HVAC engineering initiatives. Assist with development and implementation of mechanical HVAC engineering design standards, policies and procedures. Effectively interacts with other internal and external teams Responsibilities and Duties: • Visiting project sites to analyze and document existing mechanical, plumbing, fire protection, and electrical conditions., • Mechanical HVAC equipment selections., • Boiler plant design., • Chiller plant design., • Ductwork sizing and layout., • Pumping and piping system design and layout., • Air conditioning and heating load calculations., • Preparation of design and construction documents., • Cost estimate preparation., • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Oversee and assist in the development and review of technical specifications, drawings and construction documents. Client Relations, • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team, • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development.SUPERVISORY RESPONSIBILITIES:, • Bachelor’s degree from a four-year college or university in Mechanical Engineering. Work Experience, • Two plus years of experience in the mechanical and engineering consulting industry. Licenses and Certifications, • Professional Engineer license or an E.I.T are pluses., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. Estimated salary range for this position is $70,000 to 100,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable PHYSICAL DEMANDS: Lifting • Extended periods of standing and walking, possibly on uneven or challenging terrains.Flexibility in Scheduling Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR ENf0s087SW

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description We are seeking a motivated and detail-oriented Engineering Intern to join our Logistic Systems (LS) team. This internship is designed to provide hands-on exposure to real-world system design, automation, and project coordination activities while supporting improvements to our day-to-day engineering functions. The selected candidate will support initiatives related to systems engineering, electrical/controls documentation, software coordination, and internal tool development. This role offers meaningful project involvement, technical learning opportunities, and the potential for full-time employment upon graduation. Key Responsibilities: Engineering & Technical Support • Assist in developing and updating system layouts using 2D and 3D CAD tools (AutoCAD/SolidEdge preferred)., • Support preparation of technical documentation including specification sheets, process flows, and functional descriptions., • Assist with electrical and controls documentation such as I/O lists, control narratives, and revision logs., • Help develop and improve internal tools such as costing models, Excel-based trackers, scheduling tools, and dashboards., • Maintain engineering templates, documentation standards, and reporting tools., • Assist with gathering and organizing project requirements., • Support schedule updates related to engineering, testing, and integration milestones., • Help track deliverables, action items, and resource allocation., • Support preparation for system testing and commissioning activities. The posted hourly rate reflects the compensation the company reasonably expects to offer for this position. Qualifications • Currently pursuing a Bachelor’s degree in Systems, Mechanical, Industrial, Electrical, Controls, or Software Engineering., • Strong proficiency in Microsoft Office Suite (Excel required; VBA a plus)., • Familiarity with 2D/3D CAD tools (AutoCAD, SolidEdge, or similar) preferred., • Basic understanding of automation, PLCs, or control systems is a plus., • Strong analytical, organizational, and problem-solving skills., • High attention to detail and ability to manage multiple tasks., • Excellent written and verbal communication skills., • Hands-on experience supporting real-world logistics and automated system projects., • Exposure to system design, controls integration, costing tools, and scheduling processes., • Cross-functional collaboration with Engineering, Software/Controls, and Project teams., • Mentorship from experienced engineers., • Potential opportunity to return for full-time employment upon graduation. Additional Information BEUMER is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under local, state or federal laws.

Job Description We are looking for an experienced Utility / Sitework Construction Project Manager to oversees all phases of utility infrastructure projects—sanitary, storm and water—from planning and bidding to completion, ensuring projects are safe, on time, and within budget. Key responsibilities include coordinating subcontractors, managing budgets ($50k-$2,000k+ range), ensuring regulatory compliance, and liaising with stakeholders. Key Responsibilities • Project Planning & Scheduling: Develop comprehensive project schedules, timelines, and budgets using tools like Microsoft Project, Excel, or Primavera P6., • Field Operations Supervision: Coordinate and supervise on-site construction activities, including subcontractors, to ensure adherence to blueprints and technical specifications., • Safety & Compliance: Ensure all work meets local, state, federal, and company safety standards, including Occupational Safety and Health Administration (OSHA) regulations., • Budget & Resource Management: Manage project costs, estimate bids, procure materials, and manage equipment rentals to prevent overruns., • Experience: Proven experience in utility construction, infrastructure installation, or maintenance., • Technical Knowledge: Strong understanding of underground utilities, and water/wastewater systems., • Education: Bachelor’s degree in Construction Management, Civil Engineering, or a related field is often preferred, though equivalent experience is accepted., • Software Proficiency: Experience with scheduling software - MS Project, Blue Beam, HCSS Heavy Bid and Microsoft Office Suite., • Valid driver's license., • Availability for site visits and potential travel., • Ability to read and interpret construction documents, blueprints, and specifications., • Owner required background checks and random drug testing may be mandatory to work on some sites. • General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation., • Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects., • Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems., • Specializes in water and wastewater treatment plants and pump stations., • Focuses on NJ municipal, county, and state government critical infrastructure projects. West Bay Construction, Inc is an Equal Opportunity EmployerWest Bay Construction, Inc.\r\n- General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation. \r\n- Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects.\r\n- Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems.\r\n- Specializes in water and wastewater treatment plants and pump stations.\r\n- Focuses on NJ municipal, county, and state government critical infrastructure projects.\r\n\r\nWest Bay Construction, Inc is an Equal Opportunity Employer

Job DescriptionNeed a data center technician for: Connectivity and Hardware Support Voice and Data Cabling Patching Rack and Stack of data center hardware Location is Somerset NJ with occasional travel to Secaucus NJ Monday through Friday 2nd shift If any Saturdays are required, overtime pay qualifies Seeking data center technician to perform cabling/connectivity and to support network hardware. The work will include all types of patching, break-fix, circuit provision and recovery, disconnect/reconnect of desktop and networking equipment, installation of switches, rack and stack of Data Center Hardware (Server, Network and Storage) and provisioning of connectivity to Data Center Hardware. SHIFT Monday thru Friday 2 pm to 11 pm / weekends as needed on rotation Responsibilities: • Audit and document existing cabling installations., • Audit and document desktop configuration, including patching and power, for existing and proposed user locations., • Compile patching schedules as required., • Utilize Cable Management Software as required for patching planning., • Power down and disconnect all desktop equipment including any peripherals ensuring all identified and labeled correctly ready for reconnection., • IMAC-D of all desktop equipment including any peripherals, • Carry out Data Wiping activities by use of Software tools., • Carry out all types of patching including voice & data, copper & fibre., • Carry out testing and fault finding on Copper and Fibre Cabling, • Carry out all types of Copper Voice and Data terminations as required, • Carry out surveys and update drawings and schedules., • Install and test analog, digital and VOIP telephone handsets and provide headset support as required., • Build, Rack and Stack Network and Server hardware in Data Centre Halls and provide connectivity., • Working in Voice and Data Cabling environment, • Moves Adds and Changes environment, • Thorough understanding and practical experience of fibre and copper voice and data cabling including terminating, test equipment, test parameters and test techniques, • Knowledge of Rack and Stack of Server Hardware and Rack and Stack Systems, • Good knowledge of Service Now (and other Process and Asset Management Tools), • Good knowledge of Server Patching L6pCIeseT8

Job DescriptionSalary: $70-90k annually Job Summary: At GRA Design Studio, we dont just build; we craft spaces that inspire, innovate, and elevate the human experience. We are looking for an Architectural Project Manager & Designer who sees every project from a ground-up multi-family development to a precision-engineered faade as an opportunity to redefine the built environment. If you are a design-forward leader who thrives at the intersection of creative vision and technical execution, we want you to lead our most ambitious projects from first sketch to final walkthrough. Why Youll Love This Role: • Lead multi-family residential and custom commercial projects, shaping interiors, exteriors, and building faades that define communities., • Work across commercial projects including offices, industrial/warehousing, retail, and specialty spaces like salons., • Collaborate with passionate, cross-functional teams in a studio environment that values creativity, innovation, and precision., • Directly influence project outcomes, client satisfaction, and the growth of the GRA Design Studio brand. Key Responsibilities: Architectural Project Management: • Lead and manage architectural projects end-to-end, ensuring delivery on time, on budget, and to the highest quality standards., • Collaborate with clients, stakeholders, and internal teams to define objectives, requirements, and deliverables., • Maintain project schedules, progress reports, and coordination across teams., • Ensure compliance with building codes, zoning laws, and safety regulations., • Bachelors degree in Architecture, Project Management, or related field., • 57+ years of experience in architectural project management with hands-on multi-family residential and custom commercial design experience., • (Offices (General & Medical), Industrial/Warehousing, Retail, Salons and more), • Proven track record with ground-up multi-family projects, interior design, and faade work., • Commercial experience across offices, retail, industrial, and specialty spaces required., • Proficiency in project management software and architectural design tools (Revit 3+ years required, AutoCAD a plus)., • Strong communication, relationship-building, and interpersonal skills., • Ability to manage multiple projects and priorities in a fast-paced environment., • Professional licensure in architecture preferred. Job Type:Full-time Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with employer contribution), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment Compensation package: • Bonus opportunities Schedule: • 8 hour shift, • Monday to Friday Education: • Bachelors in Architecture(Required) Experience: • 5+ years(Required), • REVIT(3+ years) Required Work Location:In person/Remote

Job Description Geo-Technology Associates, Inc. (GTA) is seeking a full-time Field Geologist for tour Somerset, New Jersey office. Responsibilities will include construction observation and testing of soil, concrete, and other materials. GTA will provide you with Personal Protective Equipment, which includes a High Visibility Vest, Hard Hat, Gloves, and Safety Glasses. Hours of work are Monday through Friday, 7 AM to 4 PM. Overtime should be expected and is paid at time and a half. Occasional weekend work may be required. This is an excellent opportunity for training, certifications, and career growth! Requirements • High School Diploma or College Degree, • Ability to lift 60 pounds or more on a regular basis, • Previous Soils Testing experience desired, • Own Reliable Transportation, • Good Driving Record NOTE: This position may require standing for extended periods as well as repetitive motions such as lifting or hammering. The employee must have the ability to use their hands to handle, finger or feel; reach, climb or balance; crouch, stoop, crawl, kneel and sit, see and smell; including close, distance and peripheral vision, depth vision and ability to focus. Benefits • Competitive Salary, Paid Time Off, Paid Holidays, • Yearly bonus potential, • Medical, Dental, Vision, Health Savings Account, Flexible Spending, • Life Insurance, Short- and Long-Term Disability Insurance, • 401(k) with Company Match, • Educational Assistance Program, • Free membership to professional societies, • Professional Growth & Advancement – we’ll help you get there! - Seminars, Conventions, Lunch & Learns, Mentoring, Software Training, • Employee Referral Bonuses, • Employee Recognition Program, • Company picnics and events and a great working environment! We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof.

Job Description Job Description: • We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team., • This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-Client metal forming techniques. Responsibilities: • Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow., • Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges., • Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent., • Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production., • Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables., • Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability., • Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance., • Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs., • Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Requirements: • Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors., • Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD)., • Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining., • Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges., • Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success., • Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production., • Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Education: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline.Company DescriptionZobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and IndiaZobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India

Job Description Overview: We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-precision metal forming techniques. Key Responsibilities: · Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow. · Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges. · Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent. · Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production. · Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables. · Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability. · Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance. · Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs. · Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. · Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors. · Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD). · Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining. · Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges. · Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success. · Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production. · Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Company DescriptionZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companiesZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companies

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. We are seeking a service-oriented SCADA Services Engineer with strong problem-solving abilities, excellent customer-facing skills, and proven hands-on experience supporting, maintaining, troubleshooting, and upgrading Supervisory Control and Data Acquisition (SCADA) systems and their underlying PLCs and control panels. In this role you will be the go-to technical expert for a diverse installed base of SCADA systems including Inductive Automation (Ignition), Rockwell Automation (FactoryTalk), Wonderware, iFix, VTSCADA and Allen-Bradley PLC platforms. Day-to-day responsibilities include remote and on-site troubleshooting, break/fix support, system optimization, patch management, and implementing upgrades and enhancements on existing systems across projects of varying size and complexity. This is a customer-facing, service-focused position that requires a proactive mindset: anticipating issues before they escalate, resolving problems efficiently, and maximizing system uptime and performance while making the best use of available resources. You will regularly interact with end-users, plant operators, and internal teams to diagnose issues, explain technical concepts clearly, and deliver sustainable solutions. Who are we looking for: The successful candidate will join a strong team of motivated professionals who provide ongoing support and lifecycle services for municipal and industrial water and wastewater clients. You will be the primary technical resource for service contracts, maintenance agreements, and post-implementation support of medium to large SCADA installations (both standalone and multidisciplinary systems). Strong communication skills are essential, as you will interface daily with operators, plant managers, IT/OT teams, and other stakeholders. Ideal candidates are eager to deepen their expertise in supported platforms and expand into related areas such as industrial networking and OT cybersecurity. Offering Flexible Remote/Hybrid Work/Onsite Schedule: Hybrid work schedule (consisting of office, remote, and onsite, pending project needs) Travel & Physical Requirements: This position involves regular travel to client facilities (typically within driving distance) for on-site troubleshooting, preventive maintenance, system upgrades, emergency response, and scheduled service visits. Regional travel up to 50–70% (mostly day trips), with occasional overnight stays required depending on call-out needs and multi-day service work. • Must be physically able to lift and carry 40 lbs repeatedly - Comfortable working from heights (ladders, scissor lifts, platforms) and in confined spaces - Able to safely work on live control panels while wearing proper arc flash PPE and following NFPA 70E protocols - Candidate must maintain a valid driver’s license with no major infractions - Candidate must maintain a valid REAL ID driver’s license or other TSA-approved identificationWhat you will be doing at Woodard & Curran: • Rapidly diagnose and resolve SCADA, HMI, historian, PLC, network, and process-control-related issues in live production environments at municipal and industrial water/wastewater facilities, • Perform on-site and remote troubleshooting of SCADA communications, control system faults, instrumentation, and automation problems, • Maintain, repair, and support existing Control Panels, PLCs (primarily Allen-Bradley), SCADA servers, workstations, and associated infrastructure, • Support and execute field upgrades, migrations, expansions, minor updates, patches, and fixes on live systems while minimizing plant downtime, • Perform routine system health checks, backups, disaster recovery testing, cybersecurity updates, and preventive maintenance activities, • Remotely monitor SCADA assets and infrastructure across multiple facilities to proactively identify service degradation, maintenance needs, or potential failures, • Manage SCADA user accounts, permissions, access controls, and security settings in compliance with client and cybersecurity requirements, • Respond to emergency situations, provide 24/7 on-call support (rotational), and participate in rapid-response fieldwork when required, • Thoroughly document all work including service tickets, root-cause analysis reports, as-built drawings, infrastructure inventories, and system changes, • Collaborate closely with Operations, Maintenance, Engineering, Administrative teams, project engineers, technical managers, and account managers to ensure long-term system reliability and client satisfaction, • Work within defined service-level agreements (SLAs), maintenance contracts, budgets, and schedules, • Ability to work remotely from home or local facility while maintaining high availability for remote support and occasional site visitsWhat you will need to succeed:, • Minimum of 5 years of experience in Control System Design, PLC Programming, and SCADA Development, • Experience with Ethernet IP and network switches., • Skilled in modifying HMIs and tuning PID loops., • Strong understanding of industrial power design (medium/low voltage)., • Ability to read and interpret P&IDs and wiring diagrams., • Experience installing and maintaining electrical components and systems., • Knowledge of safety protocols and hazard recognition., • Experience with Allen-Bradley PLC hardware and software (other PLC experience is a bonus)., • Experience with Allen-Bradley FactoryTalk, Schneider Wonderware, Ignition, GE Proficy iFix HMI software (other HMI package experience is a bonus)., • Experience configuring and developing graphics for OITs such as Allen-Bradley PanelView and Automation Direct C-More., • Experience with automated reporting software (such as SyTech’s XLReporter and HachWims);, • Hands-on experience configuring, interfacing with, and troubleshooting instrumentation found in the water and wastewater industry., • Associate or Bachelor’s degree in a related field is preferred., • Strong electrical and mechanical aptitude., • Experience with Microsoft Office suite (Teams, Word, Excel, PowerPoint)., • Computer networking experience (hardware and configuration) is a bonus, • Experience in higher programming languages (VB, C++, Java, Python) is a bonus. Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Summary: Attalon is seeking a Senior Principal Electrical Engineer to lead the design of complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock sources and FPGAs, multilayer and matched RF signals with high isolation. Provide technical leadership to less experienced electrical engineers across the organization. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications., • Lead the design of high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs and monitor PCB layouts., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Work with circuit layout subcontractors and board population subcontractors, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business., • Provide technical advice to less experienced electrical engineers., • Oversee work assignments across a small team of hardware engineers. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 15+ years of circuit design experience or Master’s degree with 12+ years’ experience, or Ph.D. with 9+ years’ experience Skills: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Strong background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Experience with programmable logic devices and control system circuit design., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Knowledge of circuit board thermal and EMI management., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Experience with government defense design processes., • Self-motivated, responsible, team player with leadership experience. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking a Principal Electrical Engineer to design complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock generators, matched RF signals and FPGA complexes. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications with minimal oversite., • Design high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs., • Work with circuit layout and board assembly subcontractors., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 9+ years of circuit design experience or Master’s degree with 7+ years’ experience, or Ph.D. with 4+ years’ experience Skills Required: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Experience with programmable logic devices and control system circuit design., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Self-motivated, responsible and team player. Desired: • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Knowledge of circuit board thermal and EMI management, and ESD protection, • Experience with government defense design processes. Equal Opportunity Employer Statement: Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance: This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Systems Engineer, based in Somerset, NJ, is a multifaceted role requiring an in-depth understanding of BEUMER sortation products and applications. This position is responsible for analyzing customer requirements, developing innovative solutions, estimating costs, overseeing the development of layouts using 2D and 3D CAD and delivering customer proposals. Additionally, the Systems Engineer acting in the capacity of subject matter expert, collaborates with Sales, Engineering, and Software/Controls to ensure the successful design of solutions that address customer requirements. The Systems Engineer is also responsible for participating in and leading client meetings, calls and workshops serving in the capacity of a technical expert. Key Responsibilities: Subject Matter Expertise: • Become an expert in BEUMER's Logistics products, solutions and applications., • Lead and engage in initiatives that require expertise to address customer requirements through innovative solutions., • Understand customer requirements and business objectives and recommend appropriate products and solutions to meet their needs., • Analyze customer requirements to identify system design needs., • Develop innovative solutions using 2D and 3D CAD., • Collaborate with Sales, Engineering, and Software/Controls departments to design and develop effective system solutions., • Serve as the primary point of contact (acting as a subject matter expert) for customers, providing pre-sales and post-sales consulting on technical topics., • Develop and estimate cost associated with system design and solutions., • Coordinate in developing RFPs and manage vendor responses to RFPs., • Develop tools and assist in processes development as needed., • Participate, lead and coordinate client meetings, workshops and calls as necessary., • Coordinate with Sales, Systems Engineering, Operations and Finance to handover orders. Key Requirements and Professional Attributes: • Bachelor's degree in Industrial, Mechanical, or Electrical Engineering, • 4-6 years of experience in systems engineering, technical sales or product engineering; preferably in convey and sortation solutions., • High motivation, drive and initiative to get things done with little to no supervision., • Team player and ability to work well with large team setups including internation cultures., • Strong time management, organization and attention to detail., • Excellent written and verbal communication skills., • High computer literacy in MS Office Suite., • Proficiency in 2D and 3D modeling with preferred experience in AutoCAD and SolidEdge., • Strong mathematical, analytical, and problem-solving skills, • Active listening for customer satisfaction and technical insight, • Preferred experience automated systems, and MS Excel/VBA programming, • Ability to set and meet goals, care for others, and work collaboratively in a team., • Ability to travel as per business needs. Estimated travel is 15-20% on average. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job Description Company Overview Tri-State Energy (TSE) is a 40-year client-focused energy solutions provider committed to delivering engineering-driven strategies that improve facility performance, reduce operational and maintenance costs, and provide long term reliable solutions by seamlessly combining technical engineering with project implementation. We focus on providing energy engineering and MEP contracting support for facility optimization and decarbonization initiatives. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are searching for a dynamic Outside Sales Representative to join our team in Woodbridge, NJ. In this role, you will be the face of our energy efficiency programs, actively engaging with customers, contractors, and industry leaders. To succeed, you will need a passion for energy conservation, strong communication skills, and a knack for building relationships. Your ability to craft compelling value propositions and implement effective sales strategies will be crucial in driving program participation and raising awareness. Essential Job Functions • Implement a pre-established sales strategy to promote the company brand and message., • Research and target potential clients who could benefit from energy efficiency solutions., • Initiate contact through cold calls, emails, street sweeps, and networking events., • Clearly explain the benefits of energy savings, utility incentives, and on-bill repayment options., • Build and nurture long-term relationships with clients to ensure repeat business and referrals., • Prepare and present tailored proposals that meet the specific needs of each client., • Keep up to date with the latest developments in energy efficiency technologies and utility incentive programs., • Educate new and existing clients on new opportunities for energy savings and financial incentives., • Track and report on sales activities, progress, and results for management., • Use CRM tools to manage customer information and sales pipeline., • Represent the company at industry trade shows, seminars, and other events to generate leads and network with potential clients., • Work closely with marketing, technical, and customer service teams to ensure seamless customer experience, • Provide feedback to improve products and services based on customer interactions. Qualifications • Bachelor’s degree in sustainability, business, marketing, engineering, or a related field., • Over 3 years of experience in outside sales within the energy efficiency sector or a related field., • Must reside in New Jersey., • Possession of a valid US driver’s license., • Proficiency in CRM software, Microsoft Office Suite, Excel, Word, PowerPoint, and Outlook., • A demonstrated interest in energy conservation is essential., • Familiarity with lighting components, HVAC equipment, HVAC systems, lighting control systems, and building envelope components., • Ability to maintain and operate personal or company vehicles with a valid driver’s license., • Willingness and ability to travel within the Tri-State area, with some overnight travel required., • Strong customer service skills, with a focus on proactively identifying customer needs and managing expectations., • Excellent written and verbal communication skills., • Self-motivated individual capable of working independently or as part of a team., • Exceptional organizational, time-management, and planning abilities. Knowledge, Skills and Abilities • Capable of engaging customers, industry stakeholders, through phone calls, emails, and both virtual and in-person meetings., • Team-oriented, hands-on, highly skilled, adaptable, and client-focused., • Contacts in the construction market include builders, developers, architects, engineers, etc., • Experience in evaluating the effectiveness of sales strategies and proposing alternatives., • Excellent public speaking and written communication skills., • Experience in developing and editing professional presentations., • Proficiency in tracking goals and accurately forecasting pipeline progress., • Understanding of how to effectively engage multiple decision-making levels within a company across different target audiences., • Experience working with professional organizations and market decision-makers., • Experience with energy efficiency evaluations or audits at commercial or industrial sites., • Strong understanding of market trends, customer needs, and industry-specific best practices (e.g., lighting, construction, sustainability). Physical Demands of the Job • The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully., • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of marketing materials. Work Environment • The employee is subject to both inside and outside environmental conditions. Diversity Tri State Energy, Inc. is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Benefits • Medical, vision, dental insurance and more., • 401(k) with company match., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Holidays. Work Schedule Monday through Friday, 8:00 a.m. to 5:00 p.m., though some supervisory work will occur on 2nd or 3rd shift. • 40-hour work week., • Occasional weekends., • On-call requirement., • Some travel is required, as needed. This is a salary based exempt position with commission-based incentive plan. It is a salary base of $60,000/year plus commission.

Job Description Job Description: • We are seeking a highly skilled and motivated Engineering Manager to lead our deep drawn metal stamping operations., • This role is critical in driving innovation, optimizing production processes, and ensuring the highest product quality standards., • The ideal candidate will have a robust engineering background, extensive experience in metal forming processes, and proven leadership abilities to guide a dynamic team in a fast-paced manufacturing environment., • Work Environment: The Engineering Manager will operate primarily in a manufacturing facility setting, which includes exposure to machinery and safety hazards. Safety measures and protocols must be strictly adhered to at all times. Responsibilities: • Directly supervise and mentor a diverse team of engineers and technical staff, encouraging professional development and fostering a collaborative culture that promotes innovation., • Facilitate cross-departmental collaboration by working closely with production supervisors, quality assurance teams, and design engineers to streamline operations and enhance overall productivity., • Design, implement, and refine efficient manufacturing processes specifically for deep drawn stamping applications, focusing on maximizing throughput while minimizing scrap and rework., • Apply lean manufacturing principles, Kaizen events, and Six Sigma methodologies to identify and eliminate bottlenecks, increasing operational efficiency year over year., • Provide advanced technical support related to tooling design, material selection (e.g., various grades of steel, aluminum, and specialty alloys), and stamping operations to uphold engineering best practices., • Lead troubleshooting efforts for complex manufacturing issues, employing root cause analysis techniques to develop effective solutions that prevent recurrence., • Oversee multiple engineering projects from initial concept through to final implementation, ensuring projects meet established timelines and budgetary constraints while fulfilling customer requirements., • Engage directly with clients on custom projects, translating technical specifications and ensuring final products consistently meet rigorous quality benchmarks., • Establish and continuously improve comprehensive quality control procedures and metrics, conducting periodic audits and assessments to ensure manufacturing processes adhere to ISO 9001 standards., • Develop and manage robust testing and inspection protocols, utilizing advanced measurement techniques (e.g., laser scanning, CMM) to guarantee product reliability and safety., • Prepare and manage departmental budgets, conducting cost analyses to identify potential savings and justify capital expenditures for process upgrades and equipment acquisitions while maintaining high-quality output., • Collaborate closely with suppliers and vendors to source high-quality materials and components, negotiating favorable terms and establishing long-term partnerships that benefit production efficiency and cost-effectiveness., • Ensure all manufacturing processes fully comply with industry regulations, ISO standards, and environmental guidelines. Maintain awareness of changes in regulations and anticipate their impact on production practices. Requirements: • Directly related experience in metal stamping, with specific expertise in deep drawn processes and high-volume production environments., • Demonstrated leadership skills, with proven success in managing teams in manufacturing settings and achieving key performance metrics., • Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering simulation tools for process design and analysis., • Strong problem-solving skills, with an analytical mindset and keen attention to detail, capable of addressing complex engineering challenges., • In-depth knowledge of ISO standards, industry best practices, and quality management systems applicable to manufacturing processes., • Excellent communication and interpersonal skills, with the ability to effectively convey complex technical information to various stakeholders. Education: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related engineering field (Master's degree or relevant certifications preferred).Company DescriptionZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companiesZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companies

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are pd of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility: BEUMER Corporation is seeking an experienced, hands on Principal Controls Engineer with deep expertise in high throughput material handling automation, complex machine control, or large scale industrial systems. BEUMER solutions support the distribution and fulfillment operations of some of the largest and most recognizable global brands—from world leading e commerce marketplaces to top tier parcel carriers and major retail distribution networks. Our systems move millions of items every single day, and the controls platforms you work on will be at the center of that performance. This position is made for engineers who enjoy solving complex automation challenges, working closely with real machinery, and developing robust, scalable control logic—not managing people. You will directly contribute to BEUMER’s core control technologies used across high-speed sorters, advanced packaging & palletizing systems, and airport baggage handling equipment. Responsibilities Core Technical Responsibilities • Develop, refine, and maintain PLC‑based control systems for sophisticated material‑handling equipment and high‑speed sortation platforms., • Translate customer requirements and system specifications into clear, reliable, and efficient control logic., • Review electrical schematics, network architecture, and functional documentation as part of system development., • Work with electrical engineering teams on I/O structures, network topologies, and hardware selection., • Coordinate with PC software engineers to ensure smooth communication layers and system interaction., • Stay current with advancements in machine control technologies and industrial automation trends., • Collaborate with BEUMER’s global engineering organizations—including European development groups—to maintain alignment of controls standards and technical direction., • Prepare and test PLC hardware for projects when assigned., • Provide second‑tier technical support for escalations requiring advanced troubleshooting., • Assist in development efforts for packaging/palletizing or airport systems when needed. Compensation range: $160,000.00 - $180,000.00 Annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Requirements/Skills and Abilities Required Background • Bachelor’s or Master’s degree in Controls Engineering, Electrical Engineering, Mechatronics, or equivalent technical expertise., • Strong proficiency with Allen‑Bradley (Rockwell) and Siemens TIA Portal platforms., • Deep understanding of advanced machine‑control concepts, system diagnostics, sequencing, and safety logic., • Ability to independently analyze, diagnose, and resolve complex technical issues in dynamic environments., • Excellent problem‑solving abilities and a strong attention to detail., • Clear and concise communication skills—written and verbal., • Ability to manage multiple tasks effectively in a project-driven environment. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. We have a demonstrated history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owner. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. General Responsibilities Candidate will work with our geotechnical and materials testing/inspections departments and be responsible for a wide variety of projects for public and private sector clients. Duties may include but not limited to; test boring/test pit observations, laboratory analysis, preparation of geotechnical reports/calculation, management of field staff, review of daily field reports, performance of on-site construction materials testing services, etc. Requirements • Must be local to the Northern New Jersey market and have deep local industry experience and relationships., • Valid driver's license and satisfactory driving record., • Must meet pre-employment requirements, • Reliable vehicle suitable for use on construction sites., • 10+ years of progressive experience in the geotechnical engineering consulting industry., • Professional Engineering license in New Jersey., • Familiarity with New Jersey specific codes and requirements for geotechnical explorations., • Familiarity with geotechnical software (i.e., Gint, L-Pile, MSEW, etc.)., • Strong oral and written communication skills., • Strong business development experience Hillis-Carnes is an Equal Opportunity Employer/Affirmative Action Employer Minorities and Women are encouraged to apply. Job Posted by ApplicantPro

Job Description WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic and Florida. We have demonstrated a history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owners. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. General Responsibilities Candidate will work with our geotechnical and materials testing/inspections departments and be responsible for a wide variety of projects for public and private sector clients. Duties may include but are not limited to; general geotechnical engineering practice including the preparation of geotechnical reports/calculation, technical support of field staff, review of construction inspection daily field reports, and occasional project site field visits related to the projects you are involved in. This position is currently listed as non-managerial but depending on the qualifications of the applicant could be re-categorized as a Managing Principal. Requirements • Local to the Northern New Jersey region or willing to relocate, • Bachelor and/or Master of Science in Civil Engineering, Geological Engineering, or similar ABET accredited Engineering degree, • 12+ years of progressive experience in the geotechnical engineering consulting industry., • Professional Engineering (P.E.) license in New Jersey or the ability to obtain such license through reciprocity within 3 months of hire date., • Local Northern New Jersey market experience including local industry relationships., • Familiarity with geotechnical software (i.e., tablogs/Tablabs, L-Pile, SLIDE, Settle 3D, MSEW, etc.)., • Strong oral and written communication skills., • Strong business development skills and experience., • Ability to interpret engineering and construction plans/specifications. Hillis-Carnes is an Equal Opportunity Employer/Affirmative Action Employer Minorities and Women are encouraged to apply. Job Posted by ApplicantPro

Job DescriptionSalary: About Us: Atlas Systems Inc. is a Software Solutions company headquartered in East Brunswick, NJ. Incorporated in 2003, Atlas provides comprehensive range of solutions in the area of GRC, Technology, Procurement, Healthcare Provider and Oracle to customers across the globe. Combining our unparalleled experience of over a decade in the software industry and global reach, we have grown with extensive capabilities across industry verticals. For more information, please visit our website Please click on the link below to apply for this position: Lead Developer / Technical Architect (.NET & Azure) Location: US (NY/NJ preferred) | Open to candidates who can relocate quickly from India Work Model: Hybrid / Onsite as required Hands-on Coding: 7080% development About the Role We are looking for a hands-on Lead Developer with deep .NET and Azure expertise who can deliver immediate impact. This is not a pure architect role. The candidate will actively code, review code, troubleshoot production issues, and design Azure-native solutions when needed. You will work closely with onshore and offshore teams supporting enterprise-grade applications for a private equity client. Key Responsibilities • Design, develop, and maintain .NET Core / .NET 8+ backend services, • Own Azure-first architecture decisions for production systems, • Build and optimize applications using Azure PaaS services, • Perform hands-on coding (7080%), code reviews, and mentoring, • Design secure, scalable, and resilient Azure architectures, • Work on microservices, APIs, background workers, and integrations, • Implement Azure-native monitoring, alerts, and logging, • Partner with business stakeholders to translate requirements into solutions, • Coordinate with offshore teams and own delivery quality Mandatory Technical Skills (Non-Negotiable) .NET / Backend • Strong hands-on experience with .NET Core / C#, • REST API design, middleware, dependency injection, • Microservices architecture and service-to-service communication, • Unit testing, performance tuning, production debugging Azure (Must be Azure-first, not AWS-only) • Azure App Services, • Azure Functions (HTTP, Queue, Timer triggers), • Azure SQL / Cosmos DB, • Azure Service Bus / Queues, • Azure API Management, • Azure Key Vault, • Azure App Insights + Log Analytics + Azure Monitor, • Azure DevOps CI/CD pipelines Azure Networking & Security (Critical) • Azure VNETs, Subnets, NSGs, • Private Endpoints / Private Link, • Application Gateway (WAF), • Azure Front Door, • Traffic Manager (DNS-based routing & failover), • Secure access patterns (no public endpoints by default) Authentication & Authorization • Azure AD / OAuth2 / JWT, • App registrations, scopes, roles, claims, • Role-based access at application level Front-End (Good to Have) • React + TypeScript experience

Job DescriptionSalary: About Us: Atlas Systems Inc. is a Software Solutions company headquartered in East Brunswick, NJ. Incorporated in 2003, Atlas provides comprehensive range of solutions in the area of GRC, Technology, Procurement, Healthcare Provider and Oracle to customers across the globe. Combining our unparalleled experience of over a decade in the software industry and global reach, we have grown with extensive capabilities across industry verticals. For more information, please visit our website Please click on the link below to apply for this position: Lead Developer / Technical Architect (.NET & Azure) Location: US (NY/NJ preferred) | Open to candidates who can relocate quickly from India Work Model: Hybrid / Onsite as required Hands-on Coding: 7080% development About the Role We are looking for a hands-on Lead Developer with deep .NET and Azure expertise who can deliver immediate impact. This is not a pure architect role. The candidate will actively code, review code, troubleshoot production issues, and design Azure-native solutions when needed. You will work closely with onshore and offshore teams supporting enterprise-grade applications for a private equity client. Key Responsibilities • Design, develop, and maintain .NET Core / .NET 8+ backend services, • Own Azure-first architecture decisions for production systems, • Build and optimize applications using Azure PaaS services, • Perform hands-on coding (7080%), code reviews, and mentoring, • Design secure, scalable, and resilient Azure architectures, • Work on microservices, APIs, background workers, and integrations, • Implement Azure-native monitoring, alerts, and logging, • Partner with business stakeholders to translate requirements into solutions, • Coordinate with offshore teams and own delivery quality Mandatory Technical Skills (Non-Negotiable) .NET / Backend • Strong hands-on experience with .NET Core / C#, • REST API design, middleware, dependency injection, • Microservices architecture and service-to-service communication, • Unit testing, performance tuning, production debugging Azure (Must be Azure-first, not AWS-only) • Azure App Services, • Azure Functions (HTTP, Queue, Timer triggers), • Azure SQL / Cosmos DB, • Azure Service Bus / Queues, • Azure API Management, • Azure Key Vault, • Azure App Insights + Log Analytics + Azure Monitor, • Azure DevOps CI/CD pipelines Azure Networking & Security (Critical) • Azure VNETs, Subnets, NSGs, • Private Endpoints / Private Link, • Application Gateway (WAF), • Azure Front Door, • Traffic Manager (DNS-based routing & failover), • Secure access patterns (no public endpoints by default) Authentication & Authorization • Azure AD / OAuth2 / JWT, • App registrations, scopes, roles, claims, • Role-based access at application level Front-End (Good to Have) • React + TypeScript experience

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role: Building Envelope Project Engineer (Structural) – PE or EIT Location: Warren, NJ SUMMARY We are seeking a motivated Building Envelope Project Engineer (Structural) with a strong interest in investigation, repair, and rehabilitation of existing buildings. The position focuses on roofing, façade, structural, and balcony/deck rehabilitation projects, primarily within the multifamily sector. The engineer will provide technical evaluations, structural & envelope assessments, design support, and construction-phase engineering oversight. Depending on experience, candidates may assist in investigation, design development, structural/envelope detailing, report writing, and construction administration. Primary Responsibilities General Engineering / Project Support • Perform engineering evaluations of building envelope and structural systems, including roofs, façade components, balconies, decks, and related structural elements., • Prepare technical reports summarizing existing conditions and recommended repair strategies., • Assist with development of repair drawings, details, and specifications, with oversight from senior engineers., • Prepare written correspondence to clients, contractors, and code officials., • Manage and maintain organized technical records, drawings, test data, field photos, and project documentation., • Review project scopes, budgets, and schedules with supervising engineers to ensure deliverables are met., • Assist in construction administration activities—including reviewing RFIs, submittals, change orders, and contractor payment applications.Participate in internal QA/QC reviews to ensure accuracy and technical completeness., • Review contractor submittals, change orders, schedules, and payment applications as directed., • Conduct on-site engineering evaluations of roofs, façades, balconies, decks, structural framing, waterproofing systems, and building envelope components., • Perform field testing and documentation (moisture testing, probes, level checks, structural observations, etc.)., • Prepare detailed field sketches, measurements, and photographic documentation., • Observe repair work in progress to verify compliance with drawings, specifications, and industry standards., • Communicate observed deficiencies and corrective recommendations to senior engineers and project managers., • Attend client meetings with senior personnel, document meeting minutes and follow-up items., • Participate in discussions on scope, budget, and technical approach. Qualifications Licenses & Certifications • Entry Level PE (Structural) strongly preferred., • Additional Ideal candidates are actively pursuing Professional Engineer (PE)(Structural) licensure., • Building envelope certifications (IIBEC: RRO, RRC, RWC) or ICC certifications are a plus., • OSHA-10 preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Experience, • Bachelor’s degree in Civil Engineering, Structural Engineering, Architectural Engineering, or related field., • Understanding of construction plans, technical specifications, and industry standards., • Ability to identify typical structural defects, building envelope failures, moisture intrusion mechanisms, and waterproofing deficiencies., • Strong technical writing skills and attention to detail., • Ability to manage multiple projects concurrently and meet deadlines., • Knowledge of building codes, including IBC, IRC, and structural standards., • Professional, organized, and capable of fieldwork including ladders, attics, roofs, and difficult access areas., • Ability to work independently and collaboratively with engineers, architects, and construction professionals., • Familiarity with AutoCAD or similar drafting software is a plus. Physical Demands • Ability to lift up to 40 lbs., • Comfortable using ladders, lifts, scaffolds, and roof access equipment., • Ability to perform site work in extreme temperatures, humidity, and adverse weather., • Ability to work at heights up to 10 stories and in confined spaces (attics, crawlspaces)., • Significant standing/walking on uneven or challenging terrain. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Powered by JazzHR 3zS2GNNw0S

Job Description JOB SUMMARY Assist the Market Manager as it relates to the daily operations of a storage center within a designated territory. Responsibilities include but are not limited to, directing day-to-day supervision of a storage center and associates, assist the Market Manager in meeting customers’ expectations, and maintaining all OSHA and preventative maintenance programs for the storage center. ESSENTIAL DUTIES AND RESPONSIBILITIES • Ensure AM SOP compliance for SC Workers, • Dispatch & time-stamping assistance for drivers, • Print IF waybills for day/Check IF waybills for next day, • Coordinate with local & IF drivers throughout day, • Develop efficient plan to pull containers based on needs, • Convert containers for drivers, • Conduct training and provide guidance to SC workers, • Ensure staging for next day/week, • Lead missing container search and water testing activity, • Monitor Samsara Software/Video and report violations to Market Manager, • Complete any other assigned duties (backup EMT, MM, etc), • Back up Market Manager as needed (rotate Sundays/weekends) Weekly (Bi-weekly) • Review and approve payroll each pay cycle due date, • Submit container repair files, • Monitor SC Worker IDP training progress/perform SC worker observations, • Coordinate DEF / Wiper fluid delivery, • Open PARs, interview, onboard & other SC recruiting / hiring activity Monthly • Create/Post monthly SC Worker schedule, • Ensure Associate Certification and OSHA compliance, • Maintain consistent inventory of signs, tools, latches, parts etc. and assist with order, • Visit / Inspect all WH and drop yards in the market on a monthly basis/lead warehouse and drop-yard inspection for audit compliance, • Submit KPI & EOM info to MM & corporate support, • Review prior month P&L with TM and finance lead, • Attend Safety training sessions and complete any assigned training Quarterly • Participate in Individual Development Planning (IDP) with MM, • Complete Individual Development Planning (IDP) with SCWs, • Lead the coordination of container auctions, • Full QTLY container reconciliation turned into TM for self-audits, • Attend EMT PODZILLA & customer damage field-repair training MANAGEMENT & SUPERVISORY RESPONSIBILTIES • Typically reports to Market Manager., • Job IS directly responsible for managing other employees (e.g., hiring/termination and/or pay decisions, performance management) Storage Center Workers, Equipment Maintenance Technicians. JOB QUALIFICATIONS: Education & Experience Requirements • High School diploma required; college degree preferred or a minimum of 1 year of prior management experience., • Ability to apply and successfully attain CDL Class B License or higher., • Must maintain a current/valid driver license from the state in which position is assigned., • Must be able to obtain PODS forklift certification., • Ability to obtain a valid DOT medical card., • Mechanical ability essential to identify problems with equipment. PHYSICAL REQUIREMENTS • Ability to sit at a desk and use a computer for up to 8 hours a day; Ability to use hands and fingers to type on a keyboard and use a mouse to navigate., • Ability to stand and walk up to 8 hours a day; Ability to stoop, bend and lift boxes weighing up to 40 lbs., • Occasionally required to stand, walk and stoop, kneel, crouch, or crawl., • Specific vision abilities required by this job include close vision, peripheral vision and ability to adjust focus., • Regularly required to sit; Use hands to finger, handle, or feel; Reach with hands and arms and talk and hear., • Ability to hear and verbally communicate using a telephone handset and/or connected headset device. WORKING CONDITIONS • Schedule is on a rotating basis with a combination of weekday and weekend work., • Travel requirements: Within Local Territory., • May be subject to pre-employment criminal background check and/or drug screening as well as random drug screenings in accordance with company policy. DISCLAIMER The preceding job description has been designed to indicate the general nature of work performed; the level of knowledge and skills typically required; and usual working conditions of this position. It is not designed to contain, or be interpreted as, a comprehensive listing of all requirements or responsibilities that may be required by employees in this job. Compensation Our salary ranges are based on paying competitively for our company's size and industry and are one part of the total compensation package that also includes incentives, benefits, and other opportunities at PODS. In accordance with New York, Colorado, California, Washington and other applicable laws, PODS is required to provide a reasonable estimate of the compensation range for this role. Individual pay decisions are ultimately based on a number of factors, including qualifications for the role, experience level, skillset, geography, and balancing internal equity. A reasonable estimate of the current salary range is listed below. Base Salary $70,000-75,000 USD Equal Opportunity, Affirmative Action Employer PODS Enterprises, LLC is an Equal Opportunity, Affirmative Action Employer. We will not discriminate unlawfully against qualified applicants or employees with respect to any term or condition of employment based on race, color, national origin, ancestry, sex, sexual orientation, age, religion, physical or mental disability, marital status, place of birth, military service status, or other basis protected by law. It is essential for us to work in an atmosphere of friendly cooperation; it is your responsibility to: • Ask your direct supervisor for an explanation of anything you do not understand., • Attend Orientation class and any required training sessions., • Read your job description and Associate Handbook; sign the required acknowledgement documents and return to HR., • Ask any questions about these items as well as any information given to you at meetings and through individual or group instructions, which will assist your understanding of this position

Job Description Cooperidge Consulting Firm is seeking an Agile Coach for a top Global Logistics & Transportation leader in Warren, NJ. This role is a strategic driver for the adoption, maturity, and scaling of Agile and DevOps practices across a massive global IT infrastructure. The Agile Coach will partner with Product Owners, Scrum Masters, and Program Managers to dismantle traditional Waterfall methodologies and implement high-performing, value-driven delivery frameworks. This is an international leadership position, requiring a seasoned professional capable of mentoring offshore teams across multiple continents and promoting a unified DevOps culture. Job Responsibilities • Methodology Transformation: Lead the organization-wide transition from Waterfall to Agile; coach global teams on Agile values, principles, and high-velocity best practices., • Framework Implementation: Support and guide teams through the expert application of Scrum, Kanban, Lean, Nexus, LeSS, and SAFe frameworks., • Strategic Partnership: Collaborate with the PMO and program leadership to align Agile planning, execution, and reporting with global business objectives., • Curriculum Design & Training: Deliver interactive Agile workshops and training sessions utilizing Liberating Structures, Agile games, and modern interactive techniques., • DevOps Advocacy: Promote a robust DevOps culture, strengthening the collaboration between development and operations to streamline the CI/CD pipeline., • Continuous Improvement: Facilitate Agile ceremonies and lead retrospectives to drive measurable, long-term continuous improvement initiatives., • Bachelor’s degree in Computer Science, IT, or a related field., • At least one recognized professional Agile certification (e.g., CSM, PSM, SAFe Agilist) is REQUIRED.Experience, • Minimum of 10+ years of experience working on large-scale IT projects., • Minimum of 2 years of formal Agile Coaching experience is REQUIRED., • Minimum of 2 years of experience as a Scrum Master is REQUIRED., • Proven track record supporting large, complex, and offshore delivery teams., • Hands-on experience with Scaled Agile (LeSS, Nexus, or SAFe) and DevOps practices.Technical Skills & Competencies, • Knowledge of software design patterns and technical excellence practices (TDD, BDD, Automated Testing)., • Familiarity with Microsoft Azure DevOps is highly preferred., • Exceptional command of English (written and verbal) for international stakeholder management., • Comprehensive health, vision, and dental insurance plans, • Life insurance coverage, • 401(k) retirement plan with company matching contributions, • Paid time off including vacation, sick leave, and holidays, • Opportunities for career growth and advancement

Job Description Company Overview Tri-State Energy (TSE) is a 40-year client-focused energy solutions provider committed to delivering engineering-driven strategies that improve facility performance, reduce operational and maintenance costs, and provide long term reliable solutions by seamlessly combining technical engineering with project implementation. We focus on providing energy engineering and MEP contracting support for facility optimization and decarbonization initiatives. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are looking for a dynamic Sales Executive to join our team in Woodbridge, NJ. In this role, you will be the face of our energy efficiency programs, actively engaging with customers, contractors, and industry leaders. To succeed, you will need a passion for energy conservation, strong communication skills, and a knack for building relationships. Your ability to craft compelling value propositions and implement effective sales strategies will be crucial in driving program participation and raising awareness. Essential Job Functions • Implement a pre-established sales strategy to promote the companies brand and message., • Research and target potential clients who could benefit from energy efficiency solutions., • Initiate contact through cold calls, emails, street sweeps, and networking events., • Clearly explain the benefits of energy savings, utility incentives, and on-bill repayment options., • Build and nurture long-term relationships with clients to ensure repeat business and referrals., • Prepare and present tailored proposals that meet the specific needs of each client., • Keep up to date with the latest developments in energy efficiency technologies and utility incentive programs., • Educate new and existing clients on new opportunities for energy savings and financial incentives., • Track and report on sales activities, progress, and results for management., • Use CRM tools to manage customer information and sales pipeline., • Represent the company at industry trade shows, seminars, and other events to generate leads and network with potential clients., • Work closely with marketing, technical, and customer service teams to ensure seamless customer experience Provide feedback to improve products and services based on customer interactions. Qualifications • Bachelor’s degree in sustainability, business, marketing, engineering, or a related field., • Over 3 years of experience in outside sales within the energy efficiency sector or a related field., • Must reside in New Jersey., • Possession of a valid US driver’s license., • Proficiency in CRM software, Microsoft Office Suite, Excel, Word, PowerPoint, and Outlook., • A demonstrated interest in energy conservation is essential., • Familiarity with lighting components, HVAC equipment, HVAC systems, lighting control systems, and building envelope components., • Ability to maintain and operate personal or company vehicles with a valid driver’s license., • Willingness and ability to travel within the Tri-State area, with some overnight travel required., • Strong customer service skills, with a focus on proactively identifying customer needs and managing expectations., • Excellent written and verbal communication skills., • Self-motivated individual capable of working independently or as part of a team., • Exceptional organizational, time-management, and planning abilities. Knowledge, Skills and Abilities • Capable of engaging customers, industry stakeholders, through phone calls, emails, and both virtual and in-person meetings., • Team-oriented, hands-on, highly skilled, adaptable, and client-focused., • Contacts in the construction market include builders, developers, architects, engineers, etc., • Experience in evaluating the effectiveness of sales strategies and proposing alternatives., • Excellent public speaking and written communication skills., • Experience in developing and editing professional presentations., • Proficiency in tracking goals and accurately forecasting pipeline progress., • Understanding of how to effectively engage multiple decision-making levels within a company across different target audiences., • Experience working with professional organizations and market decision-makers., • Experience with energy efficiency evaluations or audits at commercial or industrial sites., • Strong understanding of market trends, customer needs, and industry-specific best practices (e.g., lighting, construction, sustainability). Physical Demands of the Job • The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully., • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of marketing materials. Work Environment • The employee is subject to both inside and outside environmental conditions. Diversity Tri State Energy, Inc. is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Benefits • Medical, vision, dental insurance and more., • 401(k) with company match., • Company-provided life insurance., • Health Savings Account (HSA), • Education reimbursement program with management approval., • Annual Paid Time Off (PTO) and 8 Company Holidays. Work Schedule Monday through Friday, 8:00 a.m. to 5:00 p.m., though some supervisory work will occur on 2nd or 3rd shift. • 40-hour work week., • Occasional weekends., • On-call requirement. Some travel is required, as needed. This is a salary exempt position with commission-based incentive plan.

Job Description Company Introduction Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing energy engineering support for decarbonization initiatives. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are searching for a dynamic Technical Director to join us in our Woodbridge, N.J. office and will play a crucial role in driving technical solutions to support the growth of the company. This role will run both internal IT resources, while developing an energy management system for our customers. A strong technical background, particularly in enterprise platforms, is required, with a focus on experience in guiding teams through the implementation of large-scale, complex IT solutions. The role demands deep knowledge of hardware solutions and software architecture, design patterns, and best practices for scalable, maintainable systems. The ideal candidate will have a proven track record of aligning technical execution with business objectives, strong communication skills, and the ability to work effectively with clients, executives, and technical teams. This position involves identifying and qualifying potential vendors, solutions, and building a team and platforms to drive our growth in the future. The ideal candidate will help drive systems that support engineering monitor buildings while creating an IT team that is a central part of the strategy of the company. They are a motivated self-starter with excellent communication skills and the ability to thrive in a fast-paced, client-focused environment driving the successful adoption of our IT platform and tools. Essential Job Functions • Review current IT infrastructure and solutions including platforms, support, and critical needs., • Driving innovation around building automation, M&V, and building controls., • Help create overall blueprint and drive the execution in support of the IT and tool-based strategy., • Work with clients and vendors to interact with systems and drive automation of processes and tools., • Determine and achieve SMART goals for IT systems., • Oversee deployment and upgrades of IT hardware and software., • Develop cybersecurity strategy and eliminate security risks and vulnerabilities., • Oversee IT help desk., • Handle capacity planning., • Manage outsourced IT staff including when to hire., • Prepare financial budgets and present proposals to executives and stakeholders., • Coordinate IT tasks, e.g., software updates, to ensure maximum availability and minimal downtime., • Work with external vendors and advisors., • Manage networking, development, and disaster recovery processes., • Communicate with other departments timely and efficiently on all IT matters of concern. Qualifications • Bachelor's degree or equivalent experience is required. Advanced degree, ITIL, CISSP, preferred., • Demonstrated experience in managing IT infrastructure and IT Vendors., • Knowledge of Building Management Systems (BMS) and Building monitoring systems preferred., • Deep understanding of IT systems, software development, and cybersecurity., • Several years of experience in IT roles, with a significant portion in management or leadership positions., • Ability to lead teams, manage projects, and align IT strategies with business goals., • Preference for experience building interactive systems including rollouts. Strong analytical skills to troubleshoot and resolve technical issues., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license. Must be willing and able to travel within the tri-state area., • Provide clarity in complex problems, facilitate decision-making, and guide high value investments., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills., • Interest and experience in energy conservation and engineering a plus., • Understanding systems and processes for tracking projects in facilities, HVAC and lighting, with additional expertise in design-build and audit processes is highly advantageous. Knowledge, Skills, and Abilities • Extensive IT systems knowledge and understanding., • Awareness of market trends, IT solutions, industry developments, and best practices., • Knowledge of various online systems and tools., • Ability to review requirements, costs, and existing tools, and make recommendations to executive team and then drive technical solutions., • Proficiency in Microsoft tools, CRM software, programming, hardware, etc., • Being open to feedback and continuous improvement. Physical Demands of the Job • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, mechanical and electrical rooms, rooftop, moving vehicles, and electrical current. Diversity TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Benefits • Medical, vision, dental insurance and more., • 401(k) with company match after 1st year anniversary., • Company-provided life insurance., • Health Savings Account (HSA), • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays. Work Schedule • Monday through Friday, 8:00 a.m. to 5:00 p.m., • 40-hour work week, in office., • Occasional weekends., • On-call requirement.

Job Description About 1Kosmos 1Kosmos is the leader in passwordless authentication and identity verification, providing a unified platform that combines biometric authentication, identity verification, and lifecycle management. We help organizations eliminate passwords, reduce fraud, and deliver seamless user experiences while maintaining the highest security standards. Since our founding, we've grown to serve Fortune 500 companies and government agencies worldwide, delivering cutting-edge identity solutions that protect millions of users. We are a community of innovators, problem-solvers, and passionate builders who are redefining how organizations approach digital identity. If you're driven by the opportunity to eliminate security vulnerabilities while improving user experience, join us in our mission to create a passwordless future and secure digital identities at scale. Your Role and Impact 1Kosmos is seeking a Product Marketing Manager to drive product launches, internal go-to-market enablement programs, and digital content campaigns. You will collaborate across departments and play a key role in leveraging analytics, establishing benchmarks, and bringing our identity solutions to market effectively. This is a hybrid role based out of 1Kosmos' headquarters in Iselin, NJ, with flexibility for 2-3 days in office and remote work on other days. You will work closely with the product management, marketing team, sales, and executive leadership engaged in customer and prospect discovery. We're looking for someone with B2B SaaS experience—ideally in identity, cybersecurity, or enterprise software. What matters most is understanding enterprise audiences and products that significantly impact both the teams managing them and end-users relying on them daily. A strong technical aptitude is essential, as you'll need to collaborate with product teams, solution architects, and engineers to uncover hidden value and articulate differentiated value propositions. This role is ideal if you enjoy translating complex technical concepts into compelling narratives, testing hypotheses with data-driven KPIs, and challenging teams to validate what's working. You understand that great content doesn't end at launch—continuous iteration and optimization drive lasting impact. Requirements Key Responsibilities We are looking for a creative, strategic storyteller who can turn complex concepts into clear, compelling video content that helps prospects understand our product and trust our brand. This role will own video storytelling across the customer journey, from awareness and demand generation to product education and customer advocacy. The ideal candidate combines strong narrative instincts with hands-on video production skills and an understanding of SaaS marketing. • Lead the strategy, planning, and execution of video content for marketing, product, and brand initiatives., • Translate technical cybersecurity concepts into engaging stories for IT, security, and business audiences., • Produce a range of video assets, including product explainers, demos, customer stories, social clips, launch videos, webinars, and event content., • Partner with product marketing, demand generation, sales, customer success, and product teams to identify high-impact stories., • Own the full video production process, including concepting, scripting, storyboarding, interviewing, editing oversight, and distribution planning., • Develop repeatable video frameworks that support campaigns, launches, and evergreen content., • Create content that builds trust, highlights product value, and simplifies complex workflows in a cybersecurity context., • Manage feedback cycles, versioning, and asset organization to keep production efficient and scalable., • Track performance of video assets and use insights to improve future content. Requirements 3+ years of experience in video production, content storytelling, or creative marketing, ideally in B2B SaaS or cybersecurity. Strong portfolio of video work that shows ability to explain complex products clearly and persuasively. Experience producing both short-form and long-form video content for digital channels. Excellent writing, interviewing, and narrative development skills. Hands-on editing experience with common video production tools. Comfort working with technical subject matter and collaborating with subject matter experts. Ability to balance strategic thinking with execution and ownership. Experience creating content for product marketing, demand generation, or sales enablement is a plus. Benefits The Benefits of Working with 1Kosmos · Competitive salary with significant upside as we scale and grow. · Comprehensive benefits: Medical, dental, and vision coverage, FSA/HSA, 401(k), and more. · Generous equipment budget and customized workstation—you'll have everything you need to be successful. · Long-term stability within a high-growth sector in identity and access management. · Mission-driven culture: At 1Kosmos, your work directly impacts the security and success of leading organizations worldwide. Everything we build is cutting-edge and vital to our clients' success. · Flexibility & work-life balance: Hybrid work model with remote flexibility. Note This is a hybrid role with 2-3 days onsite at our Iselin, NJ headquarters. H1B/Visa sponsorship is not currently available for this specific position. 1Kosmos is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job DescriptionDescription: The Quality Inspector for metal stamping plays a crucial role in ensuring that all products manufactured meet specified quality standards and customer expectations throughout the production cycle. This position involves rigorous inspection processes, collaboration with various teams, and a commitment to continuous improvement to uphold the integrity of our products. Requirements: Key Responsibilities: · Thoroughly examine incoming raw materials to verify compliance with established specifications and quality standards. · Document and communicate material discrepancies to suppliers and internal stakeholders to facilitate timely resolutions. · Conduct systematic and detailed inspections at various stages of the metal stamping process, including during setup and ongoing production runs. · Utilize precision measurement tools, such as calipers, micrometers, and coordinate measuring machines (CMM), to assess dimensions, tolerances, and overall component integrity. · Execute comprehensive evaluations on finished products, ensuring conformity to engineering specifications, customer requirements, and regulatory standards. · Prepare and maintain detailed inspection reports, highlighting any non-conformities and recommending corrective actions as necessary. · Perform functional, durability, and performance testing on products, if applicable, to guarantee they meet operational requirements. · Analyze and interpret test results to identify trends, potential defects, and opportunities for process enhancements. · Work closely with production supervisors, engineers, and other team members to address quality issues effectively and implement corrective actions. · Actively participate in cross-departmental meetings focused on quality improvements, safety initiatives, and production efficiency. · Maintain rigorous documentation of all inspections, tests, and quality control processes to ensure traceability and compliance with industry standards. · Prepare and present quality performance reports to management, including analysis of quality metrics and any corrective actions taken. · Ensure adherence to all quality management protocols, industry standards (such as ISO or TS standards), and company policies. · Assist in conducting internal and external audits, providing necessary documentation and insights related to quality control practices. Qualifications: · High school diploma or equivalent; a technical degree in quality control, engineering, or a related field is preferred. · Proven experience (2+ years) in quality inspection, specifically within a metal stamping or manufacturing environment. · Strong analytical skills with a keen attention to detail and the ability to identify and document defects clearly. · Proficient in using various inspection tools and measurement devices, with familiarity in computer software for data analysis and reporting. · Excellent problem-solving abilities, strong communication skills, and the capacity to thrive in a fast-paced manufacturing environment. Physical Requirements: · Ability to stand for extended periods while conducting inspections and use precision measurement equipment. · Capability to lift and maneuver materials and products weighing up to 25 pounds as needed. Work Environment: · The role is primarily performed in a manufacturing floor setting, with exposure to machinery, metalworking processes, and varying temperatures. · Adherence to safety protocols and wearing personal protective equipment (PPE) is mandatory. This enhanced job description provides a detailed overview of the responsibilities, qualifications, and working conditions for a Quality Inspector in metal stamping, emphasizing the importance of quality assurance in the manufacturing process. Benefits: · Competitive salary based on experience and qualifications, with opportunities for overtime pay. · Comprehensive health benefits package, including medical, dental, and vision coverage. · Retirement savings plan with employer match to help secure your financial future. · Access to ongoing professional development and training opportunities to enhance your skills and career growth in the industry. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to

Job DescriptionDescription: Ecommerce Implementations Project Manager Celerant Technology – The Project Manager manages key client projects. Project management responsibilities include the coordination and completion of projects on time within budget and within scope. Oversee all aspects of ecommerce projects. Set deadlines, assign responsibilities, monitor, and summarize progress of project. Prepare reports for upper management regarding status of project. The successful candidate will work directly with clients and web developers to ensure deliverables fall within the applicable scope and budget. Perform a variety of tasks. Lead and direct the work of others. A wide degree of creativity and latitude is expected. Reports to Department manager. Enhance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. This Position is for the Roswell, Georgia Office. No telecommuting. PRIMARY RESPONSIBILITIES AND ESSENTIAL FUNCTIONS: -Ensure that all projects are delivered on-time -Maintain project plans to monitor and track progress -Manage the relationship with the client -Meet with clients to take detailed ordering briefs and clarify specific requirements of each project -Track project performance -Perform other related duties as assigned -Client training Requirements: -Proven working experience in project management -Excellent client-facing and internal communication skills -Excellent written and verbal communication skills -Solid organizational skills including attention to detail and multitasking skills QUALIFICATIONS & EXPERIENCE: -Project Management Experience -Creative, Innovative Individual -Ambitious, Ability to multi-task -Team Player, but also able to work on own and manage time effectively -Experience with Ecommerce -Experience with Social Media -A functional understanding of HTML and CSS -A functional understanding of Shopify and/or Woo Commerce Work Environment and Physical Requirements Work is performed primarily in an office setting. Work pressures, disturbances of work flow, and/or irregularities are expected and occur on a regular basis. Incumbent is continuously faced with a number of projects considered to be high priority. Project work must continue while assuring that day-to-day operations continue and technical problems are resolved. Exposure to video display terminals occurs on a regular basis, minimal physical exertion is required; however, prolonged periods of sitting or standing may occur. Learned physical skill required for keyboarding and use of computer tools. WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in California, Georgia, and Texas. Celerant’s staff consists of several departments including Web Services, Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at . Requirements: PRIMARY RESPONSIBILITIES AND ESSENTIAL FUNCTIONS: -Ensure that all projects are delivered on-time -Maintain project plans to monitor and track progress -Manage the relationship with the client -Meet with clients to take detailed ordering briefs and clarify specific requirements of each project -Track project performance -Perform other related duties as assigned -Client training Requirements: -Proven working experience in project management -Excellent client-facing and internal communication skills -Excellent written and verbal communication skills -Solid organizational skills including attention to detail and multitasking skills QUALIFICATIONS & EXPERIENCE: -Project Management Experience -Creative, Innovative Individual -Ambitious, Ability to multi-task -Team Player, but also able to work on own and manage time effectively -Experience with Ecommerce -Experience with Social Media -A functional understanding of HTML and CSS -A functional understanding of Shopify and/or Woo Commerce

Job Description Project Manager – WMS & ERP Implementation Position Overview GMI Trading is looking for an experienced Project Manager to lead the implementation and optimization of our Warehouse Management System (WMS) and ERP platforms across our wholesale distribution operations. This is a hands-on leadership role for someone who has successfully delivered WMS and ERP implementations in high-volume warehouse environments and understands both the technology and the operational realities behind it. You will partner closely with Operations, Finance, IT, and executive leadership to ensure our systems support scalable growth, real-time visibility, and operational excellence. Key Responsibilities Lead ERP & WMS Implementations • Own the full lifecycle of WMS and ERP implementation projects — from requirements gathering through go-live and stabilization., • Serve as the primary point of contact between GMI Trading and external system vendors., • Develop and manage project plans, timelines, and budgets., • Oversee system configuration, testing, integrations, and user acceptance., • Align system capabilities with real-world warehouse workflows., • Improve inventory accuracy, order fulfillment, and reporting visibility., • Support warehouse automation initiatives, including conveyor and material handling systems., • Work closely with Operations, Procurement, Finance, and IT to redesign processes where needed., • Translate business needs into system requirements., • Develop and execute training plans to ensure strong user adoption., • Communicate clearly across all levels of the organization during implementation., • Proven track record of successfully implementing WMS platforms in warehouse distribution environments., • Hands-on experience supporting or leading ERP implementations Dynamics, SAP, Sin7 and etc.), • Strong understanding of wholesale or high-volume distribution operations., • Experience integrating systems across operations and finance., • Project management expertise with the ability to keep multiple workstreams moving.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of material handling, conveying, loading, palletizing, packaging, sortation, and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Project Manager role in the Products line of business is a hands-on position requiring excellent project management, technical, organizational and communication skills. This position is responsible for the planning, management, and execution of the Products segment within North America in the applicable industries such as cement, building materials, alternative fuels and raw materials, consumer goods, and petrochemical industry. Primary Responsibilities • Early engagement with the Sales and engineering team during tendering / sales phase, • Execution of new sales projects from contract signed to handover to customer as well as BEUMER's Customer Support department., • Organizing the projects through the BEUMER Stage Gate model with planning, specifications, design, production, installation/commissioning planning and agreements to execute within the agreed time frame., • Proactive and effective communication with customers, stakeholders, and the project team to ensure transparency, clarity and commitment throughout the project., • Lead a multi-disciplined project team throughout the complete project life cycle in coordination with other entities across BEUMER Group., • Mange key project management processes such as Scope/requirements management, Supply chain management, change management, risk management, etc., • Being proactive, identify, and manage opportunities and risks continuously with the right engagement level of the project stakeholders, manage potential back charges and claims and create essential documentation., • Responsible for the overall project delivery, quality/capacity wise, technically, time frame and financially., • Develop and update project schedule, • Create financial reporting and control the project budget, • Technical clarification with the project engineering team and support to site during installation, commissioning, and final testing., • Compiling report, track project tasks, update monthly status reports, • Coordination and preparation for meetings with customers as well as for internal alignment / reporting, • Follow up on action points and expedite critical activities, • Keep project documents updated and manage changes with the project team, • Support the QSHE department to ensure project health, safety and environmental standards meet or exceed legislated requirements and company policy., • Efficiently close out projects incl. making sure all customer documentation is created and stored and the projects are completely closed in the system., • Min. Bachelor's degree in engineering; mechanical, electrical, software, construction management, or similar technical field. Alternatively, at least 5 years of relevant industrial PM experience., • Project management experience with delivering projects, preferably in the mechatronic/industrial automation industry., • Strong technical background (electrical, mechanical-, marine engineer or similar), • Strong contractual and commercial knowledge and experience to manage projects as per project´s contractual agreement and commercial terms and conditions, • Process oriented and able to implement project management processes based on PMO standards., • Skilled project manager with cross-cultural understanding and good interpersonal, communication and collaboration skills., • Hands-on approach, with the ability to motivate others toward success., • Excellent report writing and presentation skills., • Essential skills include planning and budgeting, project administration, and decision-making / creative problem-solving skills., • Work closely with team members and decision makers to identify, recommend, develop, implement, and support cost-effective project delivery., • Able to interface with all members of the organization in a professional, calm, helpful and courteous manner – including Senior Executive Management, Project Management, engineering, supply chain and external stakeholders., • Strong, independent decision-making ability. Self-starter and possess a strong work ethic with a self-imposed desire to exceed everyday expectations., • Participate in required on-going technical training to be a systems subject matter expert., • Must be willing to travel and work as part of a global team of professionals as required (up to 25 % of the time)., • PMP Certification is required or must obtain PMI/PMP Certification within one year of hire. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job Description Geo-Technology Associates, Inc. (GTA) is seeking a Structural Steel Special Inspector with relevant test experience for work in the Somerset, NJ area. Structural Steel Inspector Responsibilities: • Verify construction is being completed in accordance with all plans and specifications, • Carry out inspections, sampling and testing, • Coordinate with clients, general contractors, and GTA Project Managers, • Record and document the construction in daily field reports, • Contribute to the generation of technical reports and special inspection summaries At least one of the following: • NJ DCA/ICC Structural Steel Bolting, • NJ DCA/ICC Structural Steel Welding, • NJ DCA/ICC (Soils, Structural Masonry, Reinforced Concrete, etc.), • ACI Certified Construction Special Inspector (CCS), ACI Concrete Field-Testing Technician Grade 1, ACI/CRSI Certificate for Post-Installed Concrete Anchor Installation Inspector, • Own reliable transportation, valid driver's license and satisfactory driving record., • Authorized to work in the U.S., • Ability to work independently and as a part of a team We believe in taking care of our team—professionally, personally, and everything in between. Here’s what you can look forward to as part of our team: • Competitive Salary with generous Paid Time Off and Paid Holidays to support your work-life balance, • Annual Bonus Potential – your hard work deserves to be rewarded, • Comprehensive Health Coverage – including Medical, Dental, Vision, plus Health Savings and Flexible Spending Accounts, • Peace of Mind – with Company-paid Life Insurance and both Short- and Long-Term Disability Insurance, • Invest in Your Future – through our 401(k) with Company Match, • Education Assistance Program – helping you continue to grow and learn, • Employee Assistance Program – free access to short-term counseling, financial coaching, legal consultations, life coaching, and more, • Peak Health Wellness Plan – personalized nurse consultations, no-cost lab work, and ongoing wellness support, • Stay Connected & Inspired – with free memberships to professional societies, • Professional Development – Seminars, Conventions, Lunch & Learns, Mentoring, and Software Training to help you reach your goals, • Referral Bonuses – bring great people on board and get rewarded, • Recognition That Matters – we celebrate achievements big and small with our Employee Recognition Program, • Team Spirit & Fun – enjoy company picnics, events, and a welcoming, supportive work environment We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility The Technical Project Manager is an integral part of the project management team (PM, Software PM, and Sub-PMs) with broad knowledge of mechanical, electrical, and software engineering. The role involves taking ownership of the overall technical scope coordination and validation of the project (internal/external). This role will be supporting the Logistic Systems Division. Primary Responsibilities * Lead the technical design and integration process to meet the technical standards of BG and the customer contract, from contract signing to project closure. * Communicate and coordinate with the customer, stakeholders, and partners (e.g., suppliers, consultants) on the technical aspects of the project. * Define, plan, and monitor the simulation and testing of the system, ensuring that contractual obligations are fulfilled. * Work alongside the Project Manager to ensure transparent and open communication of technical and commercial points throughout the project. * Manage and coordinate the technical interface aspects of the project, including building interfaces with the client and external suppliers. * Share responsibility for cost management (including cost improvements), time, and quality of the project. Evaluate the technical and financial impact of decisions. * Collaborate with the procurement team to create and review detailed purchase orders, including technical specifications and scope of supply. * Co-manage the requirements management process, focusing on technical requirements, including gathering, mapping, and traceability with stakeholders. * Analyze requirements, define technical specifications, and assess the technical changes and their overall impact on both the project’s technical and financial aspects. * Lead the identification, assessment, and mitigation of technical project risks. * Review technical documents prior to submission to the customer for approval. * Co-manage gate/sub-gate meetings, ensuring the fulfillment of technical tasks and the collection of lessons learned related to technical aspects. * Co-manage the quality of final O&M (Operations & Maintenance) and training documentation to support customer needs. * Provide technical support to the site during installation, commissioning, and final testing. * Be directly involved in the specification approval, design, production, installation, and commissioning phases of project execution. Compensation range: $96,000.00 - $106,000.00 annually Qualifications • Bachelor's degree in Engineering or a related technical field, or equivalent practical experience., • A minimum of 10 years of combined experience in engineering, installation, commissioning, and testing of logistics or similar technology systems., • Proven ability to set and achieve goals, with a genuine care for others and a strong desire to contribute to a successful team., • Must be flexible and willing to travel to job sites as required, up to 50% of the time. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job Description General Summary: A non-exempt position involved with both administrative and clinical areas responsible for supervising the daily operations of the clinical staff in line with the clinical practice standards of ID Care, OSHA and HIPAA; collaborates with the Nurse Manager, physicians and multidisciplinary professional staff; provides support for patients and staff. Essential Job Responsibilities: Team Leadership and Supervision · Supervise, mentor, and coordinate daily tasks for the clinical staff. · Schedule assignments for clinical staff, including time off requests and variations in schedules such as late arrival or early departure ensuring adequate coverage. · Monitor and evaluate performance; conduct regular check-ins, provide feedback for employee performance evaluations, and participate in disciplinary conversations. · Recognize any concerns, conflicts, or unexpected circumstances or events that arise in the clinical department and work with the Nurse Manager to resolve issues. · Foster a positive, patient-focused culture aligned with organizational values. Operations Management · Accomplishes ID Care clinical objectives by directing the activities of the clinical staff members through orientation, training, and scheduling assignments. · Troubleshoot and resolve escalated patient concerns or operational issues. · Monitor and optimize workflows for efficiency and accuracy. · Ensures operation of medical and administrative equipment by verifying emergency equipment availability; assisting with the completion of preventive maintenance requirements; evaluating new equipment and techniques. · Ensure compliance by obtaining weekly and quarterly logs for cleaning and emergency equipment checks. · Provide oversight about clinical supplies and vaccines, maintain inventory management and ordering. · Provide patient care as needed. · Fulfills clinical responsibilities which may include physical examination preparations; drug administration through various routes including injections; prescription verifications with physician’s orders, applying dressings, biohazard waste disposal and monitoring; laboratory procedures including Occupational Safety and Health Administration (OSHA) guidelines; quality control methods; CLIA-waived testing; venipunctures; specimen handling such as urine, throat, vaginal, stool, and sputum; emergency triage, and first aid. · Maintains a current knowledge of documentation requirements; provides education to clinical staff and monitor adherence of documentation. · Oversee clinical staff workflow. · Maintains patient confidence and protects operations by monitoring confidential information processing · Provides information to patients and health care teams utilizing multidisciplinary and team building strategies. Training and Development · Maintains current knowledge of documentation requirements; provides education to clinical staff and monitors adherence of documentation. · Help to implement and enforce clinical policies and procedures. · Orient new clinical staff following along the clinical orientation checklist. · Provide ongoing training on clinical workflow, clinical education, EMR/software upgrades. Compliance and Quality Assurance · Assures quality of care by enforcing ID Care policies, HIPAA, and OSHA adherence, as well as state nurse practice act requirements · Adheres to infection control/safety guidelines and confidentiality policies. · Provide updates when new products, lab tests, medications or any related to clinical matters develop. · Maintains a safe and clean working environment by designing and implementing procedures, rules, and regulations. Collaboration and Communication · Collaborate with PSR staff and leadership to coordinate patient care and administrative functions. · Collaborate with external facilities, providers, and healthcare workers to ensure comprehensive patient care. · Participate in department meetings and contribute to quality improvement initiatives. · Other duties as assigned. Education: High school diploma. Graduate of an approved practical nursing program. Experience: Minimum 3-5 years of LPN experience, with 1 year of supervisory experience. Other Requirements: State-licensed practical nurse. Must possess a current BLS certification and current health records with the appropriate immunizations to work in the health care field (refer to ID Care Employee Health Policy). Performance Requirements: Knowledge: 1. Knowledge of nursing practice principles and techniques, occupational health and safety hazards and standards, and health care laws and regulations., 2. Knowledge of principles of employee development to ensure appropriate training and mentoring of staff., 3. Knowledge of trends in healthcare. Skills: 1. Skill in applying and modifying, as appropriate, the principles, methods, and techniques of professional nursing., 2. Skill in identifying problems, researching, and recommending solutions., 3. Skill in developing and maintaining high level of quality care/quality assurance., 4. Skill in exercising high degree of initiative, judgment, discretion, and decision making. Abilities: 1. Ability to manage the overall provision of clinical services., 2. Ability to work effectively with diverse individuals at all levels of the medical practice., 3. Ability to handle many tasks simultaneously and deal effectively with changing priorities., 4. Ability to demonstrate full range of motion including handling and lifting patients, manual and finger dexterity, and eye–hand coordination. Equipment Operated: Standard nursing equipment and office equipment including computer hardware and software. Work Environment: Combination of office, exam, and other clinical settings. Frequent exposure to communicable diseases, biohazards, toxic substances, medicinal preparations, and other conditions common to a clinic setting. Mental/Physical Requirements: Requires standing and walking for extensive periods of time. Occasionally lifts and carries items weighing up to 50 pounds. Occasional stress caused by multitasking and level of responsibility. ID Care Vaccination Policy: Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Life insurance, • Paid holidays, • Paid time off, • Pet insurance, • Tuition reimbursement, • Supervising: 1 year (Required), • BLS Certification (Required), • LPN (Required)

Job Description We are looking for an experienced Utility / Sitework Construction Project Manager to oversees all phases of utility infrastructure projects—sanitary, storm and water—from planning and bidding to completion, ensuring projects are safe, on time, and within budget. Key responsibilities include coordinating subcontractors, managing budgets ($50k-$2,000k+ range), ensuring regulatory compliance, and liaising with stakeholders. Key Responsibilities • Project Planning & Scheduling: Develop comprehensive project schedules, timelines, and budgets using tools like Microsoft Project, Excel, or Primavera P6., • Field Operations Supervision: Coordinate and supervise on-site construction activities, including subcontractors, to ensure adherence to blueprints and technical specifications., • Safety & Compliance: Ensure all work meets local, state, federal, and company safety standards, including Occupational Safety and Health Administration (OSHA) regulations., • Budget & Resource Management: Manage project costs, estimate bids, procure materials, and manage equipment rentals to prevent overruns., • Experience: Proven experience in utility construction, infrastructure installation, or maintenance., • Technical Knowledge: Strong understanding of underground utilities, and water/wastewater systems., • Education: Bachelor’s degree in Construction Management, Civil Engineering, or a related field is often preferred, though equivalent experience is accepted., • Software Proficiency: Experience with scheduling software - MS Project, Blue Beam, HCSS Heavy Bid and Microsoft Office Suite., • Valid driver's license., • Availability for site visits and potential travel., • Ability to read and interpret construction documents, blueprints, and specifications., • Owner required background checks and random drug testing may be mandatory to work on some sites. • General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation., • Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects., • Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems., • Specializes in water and wastewater treatment plants and pump stations., • Focuses on NJ municipal, county, and state government critical infrastructure projects. West Bay Construction, Inc is an Equal Opportunity EmployerWest Bay Construction, Inc.\r\n- General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation. \r\n- Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects.\r\n- Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems.\r\n- Specializes in water and wastewater treatment plants and pump stations.\r\n- Focuses on NJ municipal, county, and state government critical infrastructure projects.\r\n\r\nWest Bay Construction, Inc is an Equal Opportunity Employer

Job Description Company Introduction Tri-State Energy (TSE) is a 40-year client-focused energy solutions provider committed to delivering engineering-driven strategies that improve facility performance, reduce operational and maintenance costs, and provide long-term reliable solutions by seamlessly combining technical engineering with project implementation. We focus on providing energy engineering and MEP contracting support for facility optimization and decarbonization initiatives. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary The Outreach Coordinator is a dynamic, field-based role designed for a motivated professional looking to launch a career in the clean energy and engineering sectors. As a primary representative for our energy efficiency programs, you will be responsible for building brand awareness and driving program participation across New Jersey. This role focuses on community engagement—meeting with business owners, presenting them at industry events, and educating stakeholders on the financial and environmental benefits of energy conservation. We are seeking a charismatic communicator passionate about sustainability and skilled at fostering long-term professional relationships. Essential Job Functions • Represent the firm at trade shows, Chamber of Commerce meetings, community events, and industry gatherings to build relationships and promote energy-efficiency initiatives., • Engage directly with architects, engineers, and mechanical contractors to explain utility programs, technical requirements, incentive structures, and collaboration opportunities., • Partner with utility outreach teams to coordinate activities, align messaging, and strengthen joint visibility with shared customer networks., • Implement targeted outreach initiatives that engage businesses, trade allies, and contractors to ensure clear understanding of available incentives and rebates., • Cultivate relationships with community organizations, local government officials, and industry leaders to expand program reach and impact., • Deliver lunch-and-learns, workshops, and public presentations that simplify energy-efficient technologies and program processes for diverse audiences., • Contribute to newsletters, case studies, technical briefs, and social media materials that highlight program successes and communicate technical updates., • Use CRM systems to document fieldwork, monitor outreach performance, and manage a growing network of contacts and partners., • Gather insights from the field to help refine program delivery, identify emerging trends, and address evolving customer needs. Qualifications • Education: Bachelor’s degree required. Preferred fields of study include Sustainability, Environmental Science, Marketing, Communications, or Business., • Experience: 0–2 years of professional experience. We highly value internships, campus leadership, or volunteer work involving public speaking and community organizing., • Communication Mastery: Exceptional interpersonal skills with the ability to initiate meaningful professional dialogue in diverse networking environments., • Commitment to Sustainability: A genuine interest in energy conservation, decarbonization, and the advancement of New Jersey’s green economy., • Digital Literacy: Proficiency in using social media for professional networking and the ability to quickly master CRM platforms (e.g., HubSpot or Salesforce)., • Logistics: Valid driver’s license and the ability to travel regularly across the NJ/Tri-state region for field-based assignments. Knowledge, Skills, and Abilities Technical Knowledge: • Familiarity with lighting components, HVAC equipment, HVAC systems, lighting control systems, and building envelope components., • Understanding of LEED, Energy Star, and/or GRESB standards., • Excellent public speaking and written communication skills., • Strong customer service skills, with a focus on proactively identifying customer needs and managing expectations., • Experience in evaluating the effectiveness of outreach strategies and proposing alternatives., • Experience developing professional reports, working with professional organizations, and engaging with market sector decision-makers., • Understanding of how to effectively engage multiple decision-making levels within a company., • Exceptional organizational, time-management, and planning abilities., • Ability to track deadlines and forecast assignments., • Self-motivated, team-oriented, hands-on, adaptable, and client-focused. Physical Demands of the Job • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, mechanical and electrical rooms, rooftop, moving vehicles, and electrical current. Diversity TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Benefits • Medical, vision, dental insurance and more., • 401(k) with company match after 1st year of anniversary, • HSA., • Education reimbursement program with management approval, • Annual paid time off., • Observance of 8 Federal Holidays. Work Schedule • Monday through Friday, 8:00 a.m. to 5:00 p.m., though some supervisory work will occur on the 2nd or 3rd shift., • 40-hour work week., • Occasional weekends., • On-call requirement., • Some travel is required, as needed.

Job Description We are looking for an experienced Utility / Sitework Construction Project Manager to oversees all phases of utility infrastructure projects—sanitary, storm and water—from planning and bidding to completion, ensuring projects are safe, on time, and within budget. Key responsibilities include coordinating subcontractors, managing budgets ($50k-$2,000k+ range), ensuring regulatory compliance, and liaising with stakeholders. Key Responsibilities • Project Planning & Scheduling: Develop comprehensive project schedules, timelines, and budgets using tools like Microsoft Project, Excel, or Primavera P6., • Field Operations Supervision: Coordinate and supervise on-site construction activities, including subcontractors, to ensure adherence to blueprints and technical specifications., • Safety & Compliance: Ensure all work meets local, state, federal, and company safety standards, including Occupational Safety and Health Administration (OSHA) regulations., • Budget & Resource Management: Manage project costs, estimate bids, procure materials, and manage equipment rentals to prevent overruns., • Experience: Proven experience in utility construction, infrastructure installation, or maintenance., • Technical Knowledge: Strong understanding of underground utilities, and water/wastewater systems., • Education: Bachelor’s degree in Construction Management, Civil Engineering, or a related field is often preferred, though equivalent experience is accepted., • Software Proficiency: Experience with scheduling software - MS Project, Blue Beam, HCSS Heavy Bid and Microsoft Office Suite., • Valid driver's license., • Availability for site visits and potential travel., • Ability to read and interpret construction documents, blueprints, and specifications., • Owner required background checks and random drug testing may be mandatory to work on some sites. • General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation., • Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects., • Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems., • Specializes in water and wastewater treatment plants and pump stations., • Focuses on NJ municipal, county, and state government critical infrastructure projects. West Bay Construction, Inc is an Equal Opportunity EmployerWest Bay Construction, Inc.\r\n- General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation. \r\n- Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects.\r\n- Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems.\r\n- Specializes in water and wastewater treatment plants and pump stations.\r\n- Focuses on NJ municipal, county, and state government critical infrastructure projects.\r\n\r\nWest Bay Construction, Inc is an Equal Opportunity Employer

Job Description We are looking for an experienced Utility / Sitework Construction Project Manager to oversees all phases of utility infrastructure projects—sanitary, storm and water—from planning and bidding to completion, ensuring projects are safe, on time, and within budget. Key responsibilities include coordinating subcontractors, managing budgets ($50k-$2,000k+ range), ensuring regulatory compliance, and liaising with stakeholders. Key Responsibilities • Project Planning & Scheduling: Develop comprehensive project schedules, timelines, and budgets using tools like Microsoft Project, Excel, or Primavera P6., • Field Operations Supervision: Coordinate and supervise on-site construction activities, including subcontractors, to ensure adherence to blueprints and technical specifications., • Safety & Compliance: Ensure all work meets local, state, federal, and company safety standards, including Occupational Safety and Health Administration (OSHA) regulations., • Budget & Resource Management: Manage project costs, estimate bids, procure materials, and manage equipment rentals to prevent overruns., • Experience: Proven experience in utility construction, infrastructure installation, or maintenance., • Technical Knowledge: Strong understanding of underground utilities, and water/wastewater systems., • Education: Bachelor’s degree in Construction Management, Civil Engineering, or a related field is often preferred, though equivalent experience is accepted., • Software Proficiency: Experience with scheduling software - MS Project, Blue Beam, HCSS Heavy Bid and Microsoft Office Suite., • Valid driver's license., • Availability for site visits and potential travel., • Ability to read and interpret construction documents, blueprints, and specifications., • Owner required background checks and random drug testing may be mandatory to work on some sites. • General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation., • Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects., • Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems., • Specializes in water and wastewater treatment plants and pump stations., • Focuses on NJ municipal, county, and state government critical infrastructure projects. West Bay Construction, Inc is an Equal Opportunity EmployerWest Bay Construction, Inc.\r\n- General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation. \r\n- Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects.\r\n- Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems.\r\n- Specializes in water and wastewater treatment plants and pump stations.\r\n- Focuses on NJ municipal, county, and state government critical infrastructure projects.\r\n\r\nWest Bay Construction, Inc is an Equal Opportunity Employer

Job Description We are looking for an experienced Utility / Sitework Construction Project Manager to oversees all phases of utility infrastructure projects—sanitary, storm and water—from planning and bidding to completion, ensuring projects are safe, on time, and within budget. Key responsibilities include coordinating subcontractors, managing budgets ($50k-$2,000k+ range), ensuring regulatory compliance, and liaising with stakeholders. Key Responsibilities • Project Planning & Scheduling: Develop comprehensive project schedules, timelines, and budgets using tools like Microsoft Project, Excel, or Primavera P6., • Field Operations Supervision: Coordinate and supervise on-site construction activities, including subcontractors, to ensure adherence to blueprints and technical specifications., • Safety & Compliance: Ensure all work meets local, state, federal, and company safety standards, including Occupational Safety and Health Administration (OSHA) regulations., • Budget & Resource Management: Manage project costs, estimate bids, procure materials, and manage equipment rentals to prevent overruns., • Experience: Proven experience in utility construction, infrastructure installation, or maintenance., • Technical Knowledge: Strong understanding of underground utilities, and water/wastewater systems., • Education: Bachelor’s degree in Construction Management, Civil Engineering, or a related field is often preferred, though equivalent experience is accepted., • Software Proficiency: Experience with scheduling software - MS Project, Blue Beam, HCSS Heavy Bid and Microsoft Office Suite., • Valid driver's license., • Availability for site visits and potential travel., • Ability to read and interpret construction documents, blueprints, and specifications., • Owner required background checks and random drug testing may be mandatory to work on some sites. • General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation., • Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects., • Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems., • Specializes in water and wastewater treatment plants and pump stations., • Focuses on NJ municipal, county, and state government critical infrastructure projects. West Bay Construction, Inc is an Equal Opportunity EmployerWest Bay Construction, Inc.\r\n- General Contractor located in Southern NJ (Atlantic County) in our 34th year of operation. \r\n- Site Preparation: Providing essential sitework services to ensure proper functionality of construction projects.\r\n- Installation & Upgrades: Laying new water mains, sanitary sewers, storm drains, for new developments or upgrading aging systems.\r\n- Specializes in water and wastewater treatment plants and pump stations.\r\n- Focuses on NJ municipal, county, and state government critical infrastructure projects.\r\n\r\nWest Bay Construction, Inc is an Equal Opportunity Employer

Job Description HiFyve is hiring Power Systems Technicians in the heavy equipment industry in Piscataway, NJ! Salary: $29.00–$44.00/hr DOE Shift: Full-Time (with after-hours emergency response as needed) Location: On-site – Piscataway, NJ Job Duties and Responsibilities • Diagnose, repair, and maintain commercial generators and engines for company and customer equipment, • Troubleshoot issues and escalate outstanding concerns to the Service Manager as needed, • Remove, replace, rebuild, or repair components to specifications in a timely manner, • Perform testing and quality checks to verify equipment performance after repair, • Review diagnostic readings and compare findings to manufacturer specifications, • Respond to after-hours emergency calls when required, • Follow all safety policies and wear required PPE, including contamination control standards, • Complete required documentation and secure equipment at the end of each shift, • Maintain technical expertise and seek continuous self-development opportunities Education & Experience Requirements • High school diploma or equivalent, • 3–5 years of experience working with power generation units (Cat or Non-Cat) Knowledge, Skills and Abilities • Strong troubleshooting, diagnostic, and repair skills with power systems, • Ability to multitask and assist with parts research and ordering, • Computer proficiency; experience with SIS Web and ET diagnostic software preferred, • Excellent communication and interpersonal skills, • Must maintain a valid driver’s license and clean driving record, • Dependable, safety-focused, and able to work independently with minimal supervision If you are interested, please apply.

Job Description 2Bridge has been engaged in the search for multiple full-time, direct-hire Lead Full Stack Software engineers with a background in Python, React, and Typescript on AWS with our financial client located near Colonia, NJ. They offer a comprehensive package that includes a base, bonus, 401k, PTO, medical, dental, vision, and other benefits! Software Engineering Lead Are you ready to step into a Technical Lead role in a rapidly evolving technical environment? Our client is investing significantly in technology and expanding their software engineering organization. This is an opportunity to join an established and well-known firm and build innovative engineering solutions. Key Responsibilities: Technical Leadership: • Lead the design, development, and deployment of scalable software solutions using Python, React, AWS, and modern scripting languages., • Make strategic architecture decisions to enhance scalability, performance, and maintainability., • Utilize AWS services, including Lambda, DynamoDB, and cloud storage, for application development., • Optimize applications for performance, security, and cost-efficiency., • Oversee the design, development, and management of RESTful and GraphQL APIs for seamless system integrations., • Design and implement automated CI/CD pipelines to enhance development efficiency., • Lead and mentor a team of engineers, fostering a culture of collaboration and technical excellence., • Utilize TypeScript, JavaScript, and Python to build robust, high-performance software solutions., • Work closely with cross-functional teams, including Business Solution Engineers, QA, and stakeholders., • Clearly articulate technical concepts to non-technical audiences. Qualifications: • Bachelor’s degree in Computer Science, Engineering, or a related field., • 10+ years of experience in software engineering and system architecture., • 10+ years building Financial or Portfolio Management, Trading, Risk, or other complex financial or SaaS applications., • Expertise in Python and React for building modern, responsive web applications., • Strong experience with AWS services such as Lambda, DynamoDB, and Redshift., • Deep understanding of API design and management (WSO2, REST, GraphQL)., • Advanced proficiency in TypeScript, JavaScript, and Python., • Experience with SQL development and optimization., • Familiarity with Agile/Scrum methodologies for project delivery., • Hands-on experience with CI/CD pipelines using tools like BitBucket, Docker, and Terraform., • Strong leadership experience in mentoring teams and guiding junior developers., • Excellent problem-solving and decision-making abilities., • Preferred: Cloud certifications and industry expertise in fintech, wealth management, or enterprise SaaS.

Job Description Position Title: Lab Technician for Drug, Alcohol and DNA Testing Location: Edison, NJ 08820 Salary: $18.00 to $22.00 - dependent on work history and experience Contact: Jeri Burt; Overview Fastest Labs is a premier provider of non-medical drug, alcohol and DNA testing services to small and large businesses and individuals. We pride ourselves on delivering fast, accurate and confidential test results with exceptional customer service. With over 250 locations in the US, Fastest Labs is rapidly expanding in New Jersey and is seeking a detail-oriented collections lab technician to work in our new Edison location. In joining us, you will have the opportunity to grow in skills and in leadership. This hands-on position administers drug, alcohol and DNA testing services, provides support to customers and other franchises and completes assigned administrative tasks required to run the lab. This role may also be asked to support the sales staff in conducting telephone sales calls to leads and making appointments. This position requires a high level of customer service, an extremely positive attitude, PC skills and an ability to work without direct supervision after completing your training. Prior medical experience is not necessary; we provide all the training required to become a certified collector/technician. We are looking for career-minded team members who want to grow into a leadership role in a rapidly growing company. Males are encouraged to apply due to Department of Transportation observed urine testing requirements. This is a full-time, in person position. Some remote or customer onsite work may be required from time to time. Work hours are 9:00 am to 5 pm Monday to Friday (1-hour non-paid lunch break). Some overtime may be required depending on the customer account which may include a weekend. Personal Attributes The Ideal candidate is a quick learner with an urgency to become an expert in your role; has enthusiasm for learning the business and working with our corporate and personal testing clients to provide excellent customer service. Primary Responsibilities • Administer drug and alcohol tests (urine, hair, saliva, breath, nails), • Collect and process DNA samples (cheek swabs), • Maintain accurate documentation and follow all chain-of-custody procedures, • Ensure cleanliness and compliance with lab protocols, • Provide professional customer service in English. A second language such as Hindi, Gujarati or Spanish is a plus., • Educate clients on testing options and recommend appropriate services, • Promote additional services and packages to walk-in clients, • Support front desk operations and assist with inbound inquiries, • Collect payments from clients before administering a personal test, • Minimum 2 years of work experience (customer service, retail, etc.). Experience in a similar role such as BAT/urine collector or phlebotomist a positive but not required, • Bilingual fluency in English, Spanish, Hindi or Gujarati is a positive, • Male candidates encouraged to apply (for gender-specific testing protocols), • High school diploma or equivalent. Must be able to pass a pre-employment drug screen and a background check., • Proficient in Word, Excel, use of a tablet; Google products and willing to learn new software and technologies., • Strong attention to detail and organizational skills; must be able to follow procedures without errors, • Excellent communication and interpersonal abilities Company DescriptionFastest Labs of Union is part of the Fastest Labs national franchise network, a rapidly expanding chain of drug, alcohol, and DNA testing centers with locations across the U.S. Our Union, NJ location is leading the brand’s strategic growth into the Northeast, delivering fast, professional, and compliance-driven testing services to organizations across New Jersey. This Lab Technician position will be located in the new Edison office once training and certifications are completed.Fastest Labs of Union is part of the Fastest Labs national franchise network, a rapidly expanding chain of drug, alcohol, and DNA testing centers with locations across the U.S. Our Union, NJ location is leading the brand’s strategic growth into the Northeast, delivering fast, professional, and compliance-driven testing services to organizations across New Jersey. This Lab Technician position will be located in the new Edison office once training and certifications are completed.

Job DescriptionDescription: A software developer intern is an entry-level team member, typically a student or recent graduate, who joins a software development team to gain hands-on experience in coding, designing, and maintaining software systems. Interns often work under the guidance of senior developers or mentors to learn and contribute to real-world projects. Key Characteristics of a Software Developer Intern: 1. Learning-Oriented: · Their primary goal is to learn industry practices, tools, and workflows. · They observe and apply concepts from their education to practical problems. 2. A software developer intern is an entry-level team member, typically a student or recent graduate, who joins a software development team to gain hands-on experience in coding, designing, and maintaining software systems. Interns often work under the guidance of senior developers or mentors to learn and contribute to real-world projects. Key Characteristics of a Software Developer Intern: 1. Learning-Oriented: · Their primary goal is to learn industry practices, tools, and workflows. · They observe and apply concepts from their education to practical problems. 2. Responsibilities: · Writing and testing code under supervision. · Assisting with debugging and fixing software bugs. · Creating or updating documentation. · Learning about the software development lifecycle and development methodologies (e.g., Agile, Scrum). 3. Skills and Tools: · Familiarity with programming languages such as Python, Java, or JavaScript. · Basic knowledge of version control systems like Git. · Awareness of frameworks, libraries, or tools relevant to the team’s tech stack. · Exposure to database systems, APIs, or cloud platforms is a plus. 4. Supervision and Mentorship: · Interns often work closely with assigned mentors or team members. · Their work is regularly reviewed to ensure quality and adherence to standards. 5. Professional Development: · They gain experience in communication, collaboration, and problem-solving. · Interns are introduced to workplace expectations, such as meeting deadlines and adapting to feedback. What Makes a Good Software Developer Intern: · Eagerness to learn and adapt. · Strong problem-solving skills. · A proactive attitude in asking questions and seeking guidance. · Basic coding knowledge and a willingness to improve. · Good communication and teamwork skills. 5. Professional Development: · They gain experience in communication, collaboration, and problem-solving. · Interns are introduced to workplace expectations, such as meeting deadlines and adapting to feedback. What Makes a Good Software Developer Intern: · Eagerness to learn and adapt. · Strong problem-solving skills. · A proactive attitude in asking questions and seeking guidance. · Basic coding knowledge and a willingness to improve. · Good communication and teamwork skills. Requirements: Responsibilities: · Writing and testing code under supervision. · Assisting with debugging and fixing software bugs. · Creating or updating documentation. · Learning about the software development lifecycle and development methodologies (e.g., Agile, Scrum). 3. Skills and Tools: · Familiarity with programming languages such as Python, Java, or JavaScript. · Basic knowledge of version control systems like Git. · Awareness of frameworks, libraries, or tools relevant to the team’s tech stack. · Exposure to database systems, APIs, or cloud platforms is a plus. 4. Supervision and Mentorship: · Interns often work closely with assigned mentors or team members. · Their work is regularly reviewed to ensure quality and adherence to standards.

Perform functional analysis, design trade studies, requirements allocation, and interface definition to translate customer requirements into Radar system software specifications,.

Confirms system and product capabilities by designing feasibility and testing methods; testing properties. Assures system and product quality by designing testing methods; testing finished- product and system capabilities; confirming fabrication, assembly, and installation processes. Develops new pr

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Estimate cost of testing and test equipment and assemble test stations. Support testing of both existing and developmental products, including troubleshooting f

Project Manager/Quality Control Engineer.NJ-27 Suite 202 - Edison, NJ 08817 US (Primary).ATANE is seeking an experienced Project Manager/Quality Control Engineer for our Bridge Inspection Group based out of the Edison, NJ office.The successful candidate for this position will be primarily responsibl

The nature of our business is to empower growth and innovation within the scientific community and to help researchers, organizations, and companies solve some of the world's most pressing healthcare challenges.Verista provides innovative solutions and services that empower informed decision-making