Trabajos software testing en New Rochelle, New YorkCrear alertas

Department/Unit: HBD - OBGYN Generalist Work Shift: Day (United States of America) Salary Range: $83,200.00 - $128,960.00 Urogynecology Nurse (RN) Division of Urogynecology within the Department of Ob/Gyn Location: 391 Myrtle Avenue, Albany Our OB/GYN practice located in Albany, NY is seeking an RN to join our dynamic Women's Health team in our high risk Maternal Fetal division! We offer a friendly team-oriented work environment centered on efficient, compassionate patient care. The Urogynecology RN is a nurse who delivers proficient care for women with pelvic floor disorders including pelvic organ prolapse, urinary incontinence, fistulae, etc. The RN demonstrates the advanced knowledge and skills to triage phone calls, assist Providers in the clinic and independently perform procedures such as urodynamic testing and catheterization. The RN supports patients and Providers with strong interpersonal skills, flexibility, and a commitment to compassionate care. Prior experience in urology is preferred but not required. Salary range: $68,640 - $99,023 Under the Supervision of the Nursing Supervisor and/or Nurse Manager, the RN provides nursing support to primary and subspecialty providers. This is demonstrated using the nursing process to work collaboratively with the health-care team in planning, directing, providing and evaluating patient care. The RN is defined within the department to provide patient care, triage, consultation and referral among team members. Essential Duties and Responsibilities include: • Completes organized and quality documentation as required by the department., • Facilitates the utilization of resources to meet patient outcomes (case management)., • Analyzes patient care needs and utilizes a systematic approach to delivery of care., • Provides age appropriate direct patient care from the preparation of patients through the end of the office visit and all tasks in between including diagnostics, venipuncture, administration of medications, and assistance of physicians as needed., • Performs telephone triage including coordination of care and documentation., • Schedules tests and procedures as indicated within the division and obtains prior authorizations as needed., • Works with physicians and other resources to develop teaching tools for families and patients., • Performs community outreach as indicated., • Work on studies with Principal Investigator as indicated within the department., • Provides patient and family education taking into consideration cultural, religious, language, and motivational, physical, emotional and cognitive factors into account in the teaching plan, • Works with other departments inside and outside of AMC to coordinate multidisciplinary care, • Ensures that medical equipment functioning properly and knows process to manage failure as need arises, • Participates in the patient throughput process in the clinic as indicated and needed (including vital signs, updating medical records, performing diagnostic procedures, assisting the physician and practitioners, facilitating teaching, end of appointment coordination of care), • Orientation of new staff, • Works with division physicians, administrative staff and Nurse Manager to assure compliance with regulatory conditions and policies and procedures, • Actively participate in the survey process in regards to accreditation, • Utilizes scheduling system lookup to ensure appropriate follow up has been scheduled, • Locates regulations and policies and procedures on line and know how to apply, • Utilizes educational resources on Intranet for self education and education of other staff and families, • Writes letters of medical necessity as indicated, • Delegates daily tasks to appropriate clinical staff and ensures completion of tasks, • Collaborates with administrative staff and physicians on the Quality Improvement Team to address clinical and non-clinical issues within the division, • Maintains compliancy with regulatory agencies, • Reviews and triages incoming test results as indicated within the division, • Documents properly, giving age appropriate care, gathering data correctly (including vital signs), and facilitating care in a customer friendly manner, • Maintains compliance with AMC standards for electronic system use, • Maintains compliance with AMC Code of Conduct, • Maintains a safe environment within the clinic and working office space, • Associate’s degree of a state accredited Registered Nursing program is required, • NYS current RN licensure to practice professional nursing is required, • Current CPR certification required, • Certification in specialty, Ambulatory setting preferred, • OB experience preferred but not required Skills required for the Position: • Excellent customer service and communication skills, • Ability to effectively present information and respond to questions from physicians, patients and their family members or other employees within the work setting. Familiar with computer software., • Effective Written and Verbal Communication Skills, • Working Knowledge of MS Word and Excel, • Experience with electronic health record preferred, • Ability to give medications via all routes and ability to calculate medication doses, • Proficiency in the operation of standard office equipment (Adding Machine, Fax, Photocopier, Credit Card Machine) and clinical equipment (Sphygmomanometer, Electronic Vital Signs machine, pulse oximetry machine, infant scale, adult scale and stadiometer), • Must be a team player and multi-task within a fast-paced clinical environment Work schedule: Monday – Friday (8:00am - 4:30pm) Weekends required: No Holidays required: No Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a “need to know” and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Account Manager Hybrid, East & Central Time Zones Why this job is important As an Account Manager at Kantar, you will be at the forefront of expanding our client relationships and driving business growth. This role demands a proactive, results-driven approach to identifying and capitalizing on new opportunities within our current client base. You will leverage your client engagement and business development skills to grow revenue, enhance client satisfaction, and contribute to our company’s success. Key Responsibilities Revenue Growth: • Accountable for meeting and exceeding individual sales quota., • Develop and implement strategies to uncover and capitalize on new business opportunities within your assigned portfolio of existing accounts, focusing on expanding service offerings and increasing revenue., • Understand financial implications (gross margin, job profit, operating profit, forecasting, pipeline management) and negotiate pricing with a client/decision maker directly Sales Strategy and Execution:, • Apply a strong hunting approach to drive business development initiatives, including upselling and cross-selling Kantar’s products and services., • Work with various research design teams to craft and present compelling proposals tailored to meet the specific needs and goals of each client., • Play a lead client-facing role from initial outreach through final proposal presentation, while staying connected through the life of a project Relationship Building:, • Build and nurture long-term, strategic relationships with key client stakeholders to ensure continued business growth and retention., • Conduct regular client meetings, business reviews, and strategy sessions to stay aligned with client objectives and identify additional opportunities within the account. Market and Competitor Insights: • Stay up to date with industry trends, market developments, and competitive landscape to identify potential areas for client growth and differentiation., • Share relevant market insights and competitive intelligence with the internal team to drive strategic decision-making and enhance service offerings. Collaboration and Coordination:, • Work closely with cross-functional teams, including project managers and research analysts, to ensure the successful delivery of services and exceed client expectations., • Coordinate with the Growth team to align on business development strategies and share best practices for client engagement. Reporting and Accountability:, • Maintain accurate and up-to-date records of client interactions, sales activities, and growth progress., • Prepare and present regular reports on account performance, revenue growth, and strategic initiatives to senior management. The skills & experience needed • 3+ years of quota-carrying sales experience in market research, analytics, insights, and media solutions; selling to marketing decision makers, • Market Research, Marketing Analytics, Brand Research experience a plus, • Proficiency in CRM software and Microsoft Office Suite, • Shown success generating revenue with various business scales from Fortune 500 to smaller B2B/B2C brands, • Demonstrated ability to translate sophisticated concepts into concise, insightful messaging, • “Hunter”/Sales mentality with strong interpersonal and negotiation skills, • Excellent commercial competence, presentation and interpersonal skills (verbal and written), • Highly motivated, self-starter, driver of change and transformation, • Ability to collaborate across departments Essential Skills & Capabilities Technical Knowledge • Product Expertise: Kantar has a wide variety of research products, services, and solutions, the ideal candidate has some base knowledge of the brand research tech space and is capable of learning offerings in Brand Tracking, creative testing, innovation, and quantitative/qualitative analysis, • Industry Trends: Awareness of current trends and advancements in the brand research space to effectively position products and understand client needs., • CRM Systems: Proficiency in using Customer Relationship Management (CRM) software to track sales activities, manage leads, and maintain client information., • Sales Tools: Familiarity with sales tools and platforms (e.g., LinkedIn Sales Navigator,, • Zoominfo) Sales Skills • Prospecting: Ability to identify and target potential clients inside new rooms of existing accounts, generate leads, and build a pipeline of opportunities., • Negotiation: Skill in negotiating terms and closing deals while balancing client needs with company goals., • Presentation: Consultative seller with Proficiency in delivering compelling presentations, • that effectively communicates the value of products and solutions to clients. Soft Skills • Leadership: Every great pitch team requires a leader and that is you. They count on you to understand the client’s business needs and manage expectations appropriately., • Continuous Learning: Willingness to stay updated with industry changes, new technologies, and evolving client needs., • Flexibility: Ability to adapt strategies and approaches based on changing client requirements or market conditions, • Empathy: Both internally and externally, it is important to understand perspectives and building rapport to foster strong relationships., • Client-Centric Approach: Focusing on delivering value and solutions that meet client needs and drive their success. What’s in it for you We provide a highly competitive benefits package! • Medical plans with comprehensive, affordable coverage for a range of health services, • Health Savings Account/FSA, • Dental, Vision and benefits to cover unique healthcare needs, • Wellness Program, • 401k with matching, • Tuition Reimbursement, Commuter benefits, • Unlimited PTO At Kantar we have an integrated way of rewarding our people based around a simple, clear and consistent set of principles. Our approach helps to ensure we are market competitive and to support a pay for performance culture, where your reward and career progression opportunities are linked to what you deliver. We go beyond the obvious, using intelligence, passion and creativity to inspire new thinking and shape the world we live in. Apply for a career that’s out of the ordinary and join us. We want to create an equality of opportunity in a fair and supportive working environment where people feel included, accepted, and are allowed to flourish in a space where their mental health and wellbeing is taken into consideration. We want to create a more diverse community to expand our talent pool, be locally representative, drive diversity of thinking and better commercial outcomes. At Kantar, the diversity of our employees provides a richer environment for our employees and broader depth and breadth of thinking for our clients. Kantar is committed to inclusion and diversity; therefore, we welcome applications from all sections of society and do not discriminate on the basis of age, race, religion, gender, pregnancy, sexual orientation, gender identity, disability, marital status or any other legally protected characteristics. PRIVACY DISCLOSURE: Please note that by applying to this opportunity you consent to the personal data you provide to us to be processed and retained by The Kantar Group Limited (“Kantar”). Your details will be kept on our Internal ATS (Applicant Tracking System) for as long as is necessary for the purposes of recruitment, which may include your details being shared with the hiring manager. The salary range for this role is $85,000 to $95,000/year, plus a variable element of $35k on achieving target, which is paid quarterly. Your final base salary will be determined based on several factors which may include but are not limited to location, work experience, skills, knowledge, education and/or certifications. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #LI-ED2 #LI-Hybrid Location New York, World Trade CenterUnited States of America Kantar Rewards Statement At Kantar we have an integrated way of rewarding our people based around a simple, clear and consistent set of principles. Our approach helps to ensure we are market competitive and also to support a pay for performance culture, where your reward and career progression opportunities are linked to what you deliver. We go beyond the obvious, using intelligence, passion and creativity to inspire new thinking and shape the world we live in. Apply for a career that’s out of the ordinary and join us. We want to create an equality of opportunity in a fair and supportive working environment where people feel included, accepted and are allowed to flourish in a space where their mental health and well being is taken into consideration. We want to create a more diverse community to expand our talent pool, be locally representative, drive diversity of thinking and better commercial outcomes. Kantar is the world’s leading data, insights and consulting company. We understand more about how people think, feel, shop, share, vote and view than anyone else. Combining our expertise in human understanding with advanced technologies, Kantar’s 30,000 people help the world’s leading organisations succeed and grow.

Job Description Transitional Services for New York, Inc., (TSINY) not-for profit, is a comprehensive, community-based mental health organization located in New York City. We provide a continuum of rehabilitative services to enrich the lives of those recovering from mental illness and facilitate their transition to increased levels of independence. Transitional Services for New York, Inc. envisions broadening its rehabilitative services and becoming a regional social service provider. Transitional Services for New York Staff will deliver effective programs with compassion, integrity, and professionalism. We expect all staff to put our clients’ needs first while respecting ourselves and each other as we provide hope to those who participate in our programs. TSINY is looking for Accounting Clerk, Full-Time for our Real Estate Operations division located in Whitestone (Queens), NY. Full -Time Accounting Clerk: $45,000 annually, $24.72/Hr. Position Summary Responsible for the timely and accurate completion of Agency and Agency affiliated real estate activity, including revenue, expenses, cash collection and reserve requirements. Essential Functions • Real Estate & Agency Level Transaction Recording, Reporting, Monitoring and Budgeting, • Monthly recording of journal entries into the general ledger for real estate entity activities (e.g., revenues, expenses, intercompany balances and replacement reserve requirements)., • Monitor cash collection and review reconciliation of real estate entity bank activity to the general ledger., • Cost monitoring of real estate entity activities., • Specialized HUD (US Department of Housing and Urban Development) reporting and budget requests for rent increases and use of/increase to replacement reserves., • Specialized asset manager reporting for real estate entities., • Prepare schedules and supporting documentation for fiscal and calendar year end audits, construction contracts and cost certifications., • Prepare Agency level fiscal year budget information for residential programs, facilities and real estate entities., • Provide monthly level of service statistical data for Agency wide programs., • Assist the Divisional Director, Real Estate Operations as requested., • Be able to sit or stand as needed, with or without reasonable accommodation., • Be able to walk, primarily on a level surface, for short periods throughout the day, with or without reasonable accommodation., • Be able to reach above shoulder height, below the waist or lift as required to file documents or store materials throughout the workday, with or without reasonable accommodation., • During a declared disaster, assume and adhere to assigned Job Action role(s) consistent with Disaster Preparedness Plan., • Bachelor’s degree and experience in accounting-related function (not-for-profit or real estate preferred)., • Demonstrated analytical skills utilizing budgetary, operational, financial and related information., • High proficiency in Excel, Word and accounting software programs required., • Strong communications and organizational skills., • Ability to work with peers and supervisors collaboratively in a collegial work environment., • Must be organized and able to multi-task with an attention to detail.

Job Description BASIC FUNCTIONS The Accounting Administrator is responsible for supporting the financial operations of the organization by performing a variety of accounting and administrative tasks. This role ensures the accuracy, timeliness, and organization of financial records while assisting in the day-to-day accounting functions. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES Accounts Receivable • Send Customers Monthly Billing Statements., • Update Customer Profiles to ensure billing information is up to date and all communication with customers are noted on accounts., • Prepare and send out Customer invoices as needed., • Assist in researching misapplied payments, overpayments, deductions/credits and work with Finance staff to reconcile accounts., • Assist Compliance and Sales Department with completing Customer Surveys., • Assist Finance Department in assessing Credit worthiness of existing or prospective clients following CTG’s credit policy., • Assist and act as backup for extending credit to customers., • Manage freight charges for all carriers (FEDEX, UPS, & DHL) download reports and reconcile carrier shipment type to internal shipment report; dispute any issues with carrier weekly., • Manage Month End Credit Card Reconciliation., • Assist with updating banking details on Vendor profile., • Process Vendor invoices received via AP Mailbox and USPS., • Establish and maintain relationships with new and existing Vendors., • Process payment methods such as Checks (including CODs), Wires, and ACHs. This includes prepayments made to vendors., • Review and post “On-Hold” invoice vouchers daily to ensure payables are current., • Perform accurate data entry into computer software programs., • Support Finance Team on various accounting tasks including ad-hoc analyses., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules, and policies. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Pending EDUCATION / EXPERIENCE / COMPENTENCY • A minimum 1-3 years of accounting/ finance experience, required., • Bachelor’s degree in accounting from an accredited university, required., • Advanced Skills in Microsoft Office Applications (PowerPoint and Excel), required., • Excellent verbal and written communication skills., • Knowledge of GAAP and basic accounting principles., • Strong attention to detail with a dedication to accuracy., • High degree of familiarity with accounts receivable functions., • Excellent Analytical Skills and ability to analyze large sets of data.

Job Description General Summary Operates, maintains and repairs an operational engineering plant which provides a facility with such services as heat, air-conditioning, steam, and emergency power. Performs preventative and corrective maintenance on plant equipment. Operates one or more boilers, chillers, generators and associated equipment to produce steam, chilled water and electrical power for the facility. Essential Duties and Responsibilities • Observes and interprets reading on gauges and meters which register various aspects of boiler operations and the Central Energy Plant (CEP) Operations., • Adjusting controls to ensure safe and efficient operations of the plant that meets the demands for the utilities provided., • Logs the various aspects of the system’s operation, keeping the boilers, chillers, machinery and other system equipment in good working order., • Maintains the log, in which various aspects of plant operations are recorded., • Required to be skilled in the repair of rotating machinery, steam systems, compressed gases and water treatment systems, (i.e., clean, oil, repair or assist in repairs to plant equipment)., • Must be fully knowledgeable of the required actions in the event of the loss of any of the regularly supplied utilities services., • Treatment of cooling tower and boiler water with chemicals and analyze the water for such things as acidity, conductivity, hardness, biological growth and alkalinity., • Maintain the general cleanliness and appearance of the Plant., • Must be knowledgeable in troubleshooting, disassembling, tube cleaning and reassembling of industrial sized boilers and chillers., • Assists others as part of the maintenance team as required and performs other duties assigned according to personal qualifications., • Excellent oral and written communication skills., • Knowledge of computer software programs to include Word, Excel, Power Point and Outlook required., • Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired., • High School Graduate, technical or trade school certificate in related field desired., • Previous experience in operating and maintaining industrial sized boilers, chillers and associated equipment., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Title: Epic Wisdom Analyst Workplace Type: Hybrid (Bronx, NY) Salary: $115,000 JOB SUMMARY · The Epic Wisdom Analyst will help with assigned application build and support. KNOWLEDGE, SKILLS AND ABILITIES REQUIRED · Epic Certified analyst with 3+ years of analyst experience in assigned application. MUST HAVE CERTIFICATIONS: · Epic Wisdom OR Ambulatory with significant Wisdom experience POSITION SUMMARY: The Epic Wisdom Analyst works extensively with project teams and their department in the transformation and improvement of processes and workflows for use with all clinical and revenue cycle applications. Understands the operational environments and advocates for effective use of technology to improve patient care. Acts as a liaison between the clinical departments and Information Services. Assists in the development of re-engineered best practice workflow processes and identifies system integration and optimization that provides the greatest technological benefit to clinical departments. Performs system installations, maintenance, training, and user support within a defined application environment having knowledge, taking responsibility for the architecture, and defining how the systems work internally and together. Responsibilities include the administration of core business systems or integrated computer applications that go beyond a single department or system. Epic Certification is required. ESSENTIAL FUNCTIONS: Qualified individuals must have the ability (with or without reasonable accommodation) to perform the following duties: · Utilizes expertise to design, build, install, modify and test application software to support and optimize operational work processes. Keep abreast of current technology, software and hardware and promote change processes. Analyzes functionality and tests new releases to determine best use by end users; investigates preferred choices of end users. · Provides problem solving, troubleshooting, and code debugging of simple and intermediate issues at the technical, interface and application levels. Identifies root-cause and recommends changes. Escalates complex issues as necessary. Understands integration between various applications and functionality within those applications. Serves to assure full integration of applications and devices utilizing interfacing standards and vendor provided utilities · Interacts with users to assure system is operating and performing according to specifications. Collaborates with other Applications Analysts, IT, the vendor, department staff, and other team members to provide technical and clinical support. · Adheres to St Barnabas Health technology, coding, and naming convention standards, as well as change control process and procedures. · Assists with defining and documenting user requirements and system scope. Reviews and collects information regarding potential system enhancements. · Recommends best practice workflows and develops business plans for automating and optimizing processes that transform and improve clinical care and patient safety. · Maintains and deploys understanding of system development and project management methodologies in assessment, planning, design, workflow analysis, timelines, and testing, during implementation, optimization and ongoing operations. · Executes assigned tasks in the project plan for the installation of hardware, software, networks, physical site, training environments and test environments for the initial and subsequent implementations.

Symphony Towers Infrastructure Job Title: Software Engineering Lead Department: Information Technology Reports to: Head of IT About - Symphony Towers Infrastructure Symphony Towers Infrastructure acquires, manages, and leases rooftop, tower and other telecommunication cell sites interests in urban, suburban, and rural environments throughout the United States. Symphony operates as one of the largest privately held owners of these sites across the United States and is backed by one of the largest digital infrastructure firms in the country. Two things separate us from the rest: a long-term view and simple process.Our investments are made from a strategic, long-term, buy-and-hold perspective. This allows us to make a better offer to the marketplace and provide a better, more efficient acquisition process. Software Engineering Lead Opportunity We are looking for an experienced, hands-on Software Engineering Lead to drive and manage all critical technical initiatives across the organization. This leadership role will be responsible for overseeing Salesforce administration, development, cloud platform management, and other key technology projects. The ideal candidate will be an influential collaborator, capable of working with cross-functional business teams to understand business needs and deliver innovative, scalable solutions. Key Responsibilities • Lead the design, development, and continuous enhancement of the firm’s Salesforce platform, ensuring its alignment with business goals and technical requirements., • Provide day-to-day Salesforce administration and offer hands-on support for end-users across the business., • Oversee the current cloud platforms and collaborate with the internal technology team to ensure smooth operation, scaling, and security., • Drive the strategy, architecture, and overall management of the Salesforce platform to maximize value, optimize scalability, and ensure compliance with security standards., • Implement and uphold industry-standard Software Development Lifecycle (SDLC) processes to ensure high-quality, on-time project deliveries., • Work closely with department heads and key stakeholders to define and refine the technical vision and software engineering strategies for the organization., • Lead web development initiatives, driving technical solutions that are user-friendly, responsive, and efficient., • Partner with the data management team to support and enhance data analytics capabilities within the organization., • Manage the integration of Salesforce with other business applications and data sources, ensuring seamless communication and data flow across platforms., • Evaluate and select new technologies and tools, and drive the implementation of these solutions within the organization., • Actively mentor and provide technical guidance to junior team members, fostering growth and technical excellence within the engineering team., • Manage performance tuning, system optimization, and resolution of production issues in a timely manner., • Design and implement best practices for coding standards, testing, and documentation within the team., • Lead code reviews, ensuring high-quality, maintainable, and scalable code., • Develop and maintain technical documentation for processes, configurations, and system architectures., • Ensure compliance with industry regulations, security standards, and best practices in all technology solutions. Qualifications: • Bachelor’s degree in Computer Science, Information Management Systems, or a related field., • 7+ years of hands-on experience in Salesforce administration, development, and platform management, including in-depth knowledge of both declarative and programmatic development on Salesforce., • Proven expertise in designing, implementing, and managing cloud-based platforms and services (e.g., AWS, Azure) (Preferred)., • Strong understanding of software engineering SDLC processes, with the ability to implement Agile methodologies effectively., • Strong knowledge of integration techniques, including RESTful APIs, SOAP, and middleware platforms is Preferred, • Hands-on experience with databases (e.g., SQL, NoSQL) and data modeling practices is preferred., • Knowledge of security best practices for cloud-based applications, with experience in implementing security controls and monitoring., • Strong project management skills, including experience with project planning, scheduling, and stakeholder management., • Vendor management experience, with the ability to evaluate and manage third-party technology solutions., • Experience with Power BI, Tableau, or similar data visualization tools is preferred., • Exceptional communication skills, both written and verbal, with the ability to present complex technical concepts clearly to non-technical stakeholders., • Strong problem-solving abilities and a proactive, hands-on approach to technical challenges.

Job Description Job Title: Product Expert Reports to: Product Expert Manager Department: Product Expert Team Location: White Plains, New York Position Summary: The Myriad Systems Product Expert is responsible for advancing the sales process by scheduling and delivering impactful demonstrations of our EHR software, while also identifying opportunities to cross-sell additional service lines that align with client needs. The Product Expert will be responsible for managing a robust calendar of demos, ensuring that each session is informative, engaging, and tailored to meet the needs of prospective clients. The goal will be to schedule and complete multiple demos per week, with each demo lasting approximately 30 minutes. As a Product Expert with a Sales Focus, you will not only be responsible for delivering tailored, engaging demonstrations of Myriad Health’s EHR & Billing Software but also for driving sales and client conversions. You will collaborate closely with the sales team, assist with negotiations, and close deals, ensuring a smooth transition from demo to onboarding. You will leverage your knowledge of Practice Management solutions to understand client needs, provide product insights, and build long-lasting client relationships. Key Performance Areas & Key Performance Indicators: Schedule and Conduct Demos (40%) • Proactively scheduling and conducting virtual product demonstrations to highlight the features, functionalities, and benefits of Myriad’s EHR software., • Performance is primarily measured by two key metrics: the number of meetings scheduled with new prospective clients and the number of demos completed each week., • The goal is to schedule and conduct at least five meetings and five demos weekly., • These activities are tracked and verified through CRM reports and logged calendar invites to ensure consistency and accountability. Engage Prospects (10%) • Tailor your presentations to encourage engaging, two-way discussions, and consistently follow up with demo leads who has not committed to sign up., • Your ability to connect with prospects and maintain momentum after the demo is crucial to your success., • Ensure that your demos include active client participation, such as asking questions or joining the discussion. This will be tracked through your post-demo assessments and reviewed demo recordings., • Follow up with demo leads and all prospective clients within 24–48 hours, with activity tracked in the CRM system. Product and Pricing Knowledge (10%) • Maintain up-to-date knowledge on all EHR software features and pricing updates to ensure you deliver accurate and relevant information during product demos and service line discussions., • Complete quarterly product knowledge assessments evaluated through both formal testing and interactive calls. Customer Relationship Management (10%) • Effectively use CRM tools to log demos, follow-ups, and client interactions, ensuring a seamless and well-documented sales process., • Log activities in the CRM within 24 hours of occurrence, as tracked by CRM timestamps., • Act as the primary point of contact for prospects, providing timely support and coordinating with internal teams as needed., • Complete follow-ups within 48 hours after client interactions, verified through CRM records and manager review. Cross Sell & Up-Sell (10%) • Introduce and present additional services during product demos and negotiations, enhancing value for the client and contributing to revenue growth. By understanding each client’s needs, you will recommend tailored solutions that complement the core EHR product., • Track all service lines discussed during demos and prospective communications through CRM entries. Onboarding & Post Sales Support (10%) • Ensure a smooth transition from sales to onboarding by providing accurate client information, actively participating in client kick-off meetings, and supporting the onboarding team to resolve any potential roadblocks. Your involvement helps set clear expectations and contributes to a seamless client experience from the very start., • Ensure deals have all the required documentation completed and submitted before hand-off, verified through CRM or deal folder audits., • Schedule client kick-off calls within 3 business days for closed deals, tracked via calendar or CRM., • Attend your assigned client kick-off calls, as recorded in calendar. Continuous Learning & Knowledge Sharing: (10%) • Stay informed on the latest product updates and industry trends to deliver compelling, high-impact demos. Actively engaging in internal training, contributing to team feedback sessions, and applying client insights to refine your approach are key to improving both presentation quality and customer satisfaction., • Attend internal trainings and continuing education sessions, tracked through attendance records., • Participate in internal training and share feedback with the team to continuously improve the sales and demo processes, • Regularly review and incorporate client feedback to enhance product presentations and overall customer satisfaction Required Skills/Abilities: • Minimum of 3 years of experience in a sales role that involved conducting demos, either in-person or virtually. Experience with EHR software or related technology is a plus., • Demonstrated ability to effectively present and sell software solutions, with a strong track record of meeting or exceeding sales targets., • Proficiency in using CRM software and other client management tools (Monday.com preferred), • Proven experience in a customer-facing role, with a strong sales background, • Strong understanding of EHR, Billing Software, or related healthcare solutions (preferred but not required), • High school diploma required, • Bachelor’s degree in healthcare or business admin preferred., • Prolonged periods sitting at a desk and working on a computer. Operations Knowledge - Thoroughly understands the operational procedures for his/her position and how they affect or relate to other departments in the company. Serves as an expert for others. Product Knowledge - Has a broad knowledge of the products and services offered. Is aware of the features and pricing of the products and services they support. Is able to recommend the appropriate product or service that will meet the customer's needs. Compliance Knowledge - In addition to having a solid knowledge of general bank-wide regulations, the employee has a thorough knowledge of regulations & laws that relates to his/her department. Other employees might rely on this employees’ compliance knowledge to answer questions. Sales & Service - Is able to lead a team to achieve sales goals while balancing the needs of the customer. Coaches/teaches sales methods to those they supervise. Provides a consistent level of service to all internal and/or external customers. Maintains good communication by keeping the customer up-to-date on the progress of a request. Follows through on requests, questions, or complaints. Displays a positive, professional image and maintains composure at all times. Teamwork - Able to build morale and group commitments to goals and objectives; Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed. Computer Skills - Demonstrates a solid understanding of the technology utilized in his/her position. Consistently looks for ways to use technology to create efficiencies. Able to troubleshoot minor problems. May serve as an expert to others. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Strength - Employee must be able to stand and/ or sit for periods of time while waiting on customers. Employee may be required to walk, reach, lift, carry and bend. This job also requires the ability to lift and/or move up to 15 lbs. Occasionally, may need to lift more than 15 lbs. Finger Dexterity - Employee will have to use fingers to make small movements, such as typing, picking up small objects, or pinching fingers together. Talking – The ability to convey information accurately by speaking to customers and other employees. Hearing - Able to hear average or normal conversations and receive ordinary information. Visual Abilities – Specific vision abilities used by the job are close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Employer reserves the right to change this job description at any time, should business needs arise.

Job DescriptionSalary: 80K+ Title: Project Engineer Job Summary Infinity Contracting Services Corp is actively seeking a highly motivated Project Engineer with prior construction experience to join our team to a project located in the five boroughs of New York City. We recognize our employees are the companys most valuable asset. Inspiration, diligence, and encouragement towards each other coupled with purposeful work lead to a rewarding career, and we are proud to provide a platform with which our employees can attain their goals. The Project Engineer position will assist and support project manager, superintendent, and/or foreman on assigned project(s). The position will work under direct supervision, perform routine daily activities and gather, distribute information and deliverables, and manage project management software. Responsibilities and Duties Setup, manage and maintain project management software for each job Organize, maintain and process contract documents and shop drawing in order to meet project budget, schedule, and requirements Identify, issue and manage RFIs Formulate start-up, testing and commissioning procedures Serve as a point of contract regarding technical information associated with the project Verify existing field conditions and report changes to affected parties Lead internal MEP coordination process Facilitate required inspections, testing, and commissioning Review contract documents for completeness and consistency Identify project scope deviations from contract documents and field observations Monitor construction progress for quality compliance Resolve and manage client issued non-compliance reports Assist the project manager with buy-outs Release equipment and materials per approved submittals Manage and coordinate lead times and delivery dates for equipment and material Generate submittal, RFI, equipment, etc. logs for project stakeholders Qualifications and Skills • Bachelors Degree in Engineering: Mechanical, Civil, Environmental, or related engineering disciplines (or equivalent experience)- NOT REQUIRED, • 3+ years of experience on projects, • Ability to work in a multi-task environment, • Strong oral and written communication, • Excellent time management skills, • Working knowledge of Microsoft Office Suite Benefits: • 401 (k) *401 (k) matching *Dental Insurance *Health Insurance *Vision Insurance *Life Insurance *Opportunities for advancement

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description Chef Operator [Executive Chef/General Manager] COMPENSATION: Salary Range: $80,000-85,000/year with annual increase + quarterly bonus with high growth potential PERKS AND BENEFITS: • 16 weeks of Fully Paid Parental Leave (for primary and secondary caregivers), • Health Insurance (Medical, Dental, and Vision), • Paid Time Off, • 401K Program, • Phone Reimbursement, • Commuter Benefits, • Complimentary DIG Meals every day As a Chef Operator, you will build a team that is driven by culinary excellence, and lead them to new skills in our scratch-based kitchen. You are a dynamic leader who loves to train, mentor, and develop your teams into future leaders by teaching them new skills everyday and showing up as your best self. You're an achiever who has a strong sense for operations and is driven by results. In our operation centered around innovation, you are always looking at business from a strategic, and systematic lens to set you and your team up for success. Staying organized while managing logistics and thinking big picture in a fast paced environment is key to your role as Chef Operator. We are constantly evolving our menu and testing new initiatives to improve our business operations. You will effectively manage, delegate and multitask to ensure your team is well equipped to handle any new challenge. You will clearly communicate and uphold culinary standards, roll out new projects/initiatives, and keep up with all DOH guidelines, all while inspiring your team to work towards a better food future. You are responsible for managing the entire restaurant operation and maintaining oversight over all front-of-house and back-of-house ops. ABOUT THE TEAM: Our Restaurants run using a traditional brigade system. As the Chef Operator, you are the first in command and have a true sense of ownership over your restaurant. You partner directly with the Chef de Cuisine to drive success and report to the Field Leadership Team. You work collaboratively with the other restaurant leaders to ensure the restaurant team is well-trained and organized to provide guests with an experience that goes beyond a great meal. DIG is determined to help support the next generation of farmers, cooks and chefs! YOU WILL: • Be responsible for the entire restaurant operation, including PnL responsibilities such as food cost management, labor efficiency, guest experience and building top-line sales., • Collaborate with the CDC on QA processes and convert guest feedback into actionable insights for the team., • Manage new initiatives and scheduled launches within the restaurant while instilling an entrepreneurial spirit in your team to keep them excited and engaged., • Monitor the operational flow of the restaurant, ensuring culinary and DOH standards/protocols are being followed and executed., • Manage all problems with technology, systems and/or offsite ordering platforms. You are proactive in troubleshooting and can handle all the moving pieces with ease., • Be the face of hospitality by both interacting with guests and delivery drivers to provide exceptional service and training up concierge roles in the restaurant to do the same., • Ensure that all employee relations conversations are properly documented and communicated to HR, including performance and GROW model conversations., • Manage recruitment needs for your restaurant by proactively interviewing, hiring and onboarding new culinarians., • Review & collaborate on people development plans with the Field Leadership team to build thoughtful succession plans., • Communicate verbally and digitally on a daily basis across various systemic and conduct Pre-shifts & Chef's tables with your restaurant team to keep them informed on updates and new restaurant goals., • 3 - 5 years minimum kitchen or operational restaurant management experience., • A passion for real, good food and the leadership skills to operate a scratched base, every changing kitchen., • The willingness to roll up your sleeves and pitch in whenever and wherever necessary., • The demonstrated skills to motivate and develop a high-performing team., • The discipline and desire to create systems and organization within fast changing environments., • Excellent communication skills and an eye for detail., • Strong computer skills. You can navigate multiple digital ordering systems with ease., • Ability to learn technological platforms and work systematically with them., • Familiarity with restaurant costing and inventory software., • The ability to perform physical requirements of the position (the ability to frequently lift up to 25 pounds and occasionally lift up to 50 pounds). These physical requirements may be accomplished with or without reasonable accommodations., • The desire for professional improvement and the process of learning., • The drive to network and build strong ties in your restaurant's community., • The ability to take many variables to find the best solution to a problem. Salary Range: $80,000-85,000/year with annual increase + quarterly bonus with high growth potential Our salary ranges are rooted in the desire to pay competitively relative to our organization size and industry, reflecting just one part of the total compensation package; additional components include quarterly bonus potential, healthcare benefits, various work perks (commuter benefits, free lunch) as well as opportunities for continued growth at DIG. Individual compensation decisions are determined by factors that include skills-based qualifications, prior work experience, and balancing internal equity relative to other DIG employees. We expect the majority of candidates who are offered roles at DIG to fall healthily within the ranges based on these factors ABOUT US: To learn more about our mission and food please visit our website at: NOTE: DIG believes in the power of a shared table to bring people together as we are committed to building a culturally inclusive team. Female, LGBTQ+, BIPOC, and diverse candidates are encouraged to apply ADDITIONAL ROLE NOTES: The duties of this position may change from time to time. Dig reserves the right to add or delete duties and responsibilities at the discretion of Dig or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Dig is proud to be an Equal Opportunity Employer. We do not discriminate on the basis of race, age, ancestry, creed, color, religion, gender, sexual orientation, pregnancy, childbirth, breastfeeding or related condition, unemployment status, gender identity or expression, transgender status or gender dysphoria, marital status, domestic violence, sexual violence or stalking victim status, national origin, citizenship, disability, covered veteran and/or military status, genetic information or predisposing genetic characteristic, familial status as that term is described under the New York State Human Rights Law, caregiver or partnership status as those terms are defined under the New York City Human Rights Law (if you are employed in New York City) or other protected status or any other characteristic as protected under applicable federal, state and local law ("Protected Status")

As a software engineer on the PCL team, you will be responsible for designing and developing full-stack software products for privacy, data protection, and Responsible AI (AI explainability, fairness, transparency, testing & evaluation, etc. Engineering background in Computer Science, Mathematics, S

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Parental leave, • Training & development General Responsibilities Specialize in education, developing care plans and treatments for: Venous disease, Blood Flow and Circulation and Varicose and Spider Veins Conservative and Interventional Pain Management of the Spine and Joints Sleep Disorders and Sleep Apnea Wellness Initiatives including Weight Loss, Hormone Replacement Therapy, Peptide Therapy, Regenerative Medicine Work collaboratively with multidisciplinary teams, including physicians, chiropractors, acupuncturists, medical assistants and medical massage therapists to develop individualized care plans Order and interpret diagnostic testing including x-rays, MRI, ultrasound, sleep studies and blood work Primary Responsibilities Work as the lead medical/clinical provider as part of an event care team at screening events in different locations in NY and NJ including municipalities, places of business, and corporations. Evaluate, help diagnose, and interpret studies performed at events focusing on vascular health, blood flow and circulation, veins, pain, sleep and wellness. Help schedule patients for office visit follow ups or procedures as indicated. Secondary Responsibilities Work in the offices alongside the event team, call center team and other members of the practice to assist with follow up after screening events in order to further develop plans of care. In office patient care including evaluating, diagnosing, and interpreting studies and bloodwork performed also focusing on vascular health, blood flow and circulation, veins, pain, sleep and wellness. Coverage of office hours and other providers as needed Help schedule patients for further office visit follow ups or procedures as indicated. Qualifications Valid Nurse Practitioner license- NJ/NY is preferred Ability to understand and learn different diagnostic studies and treatment modalities to assist with pain management, vascular health and sleep apnea Excellent communication skills Compassionate patient care approach Multitasking Experience with EMR and different tracking software such as Excel, ECW etc. Ability to travel in NY and NJ Willingness to learn new care pathways

Job Description Laboratory Supervisor - Immunology POSITION TYPE: Allied Health SPECIALTY UNIT: Laboratory SHIFT: Day - Mon-Fri alternating weekends and holidays JOB TYPE: Full-Time Permanent Are you a passionate and experienced laboratory professional looking to make a real impact? We're seeking a highly motivated Laboratory Supervisor to join our dedicated team. In this leadership role, you'll play a pivotal role in ensuring the Chemistry and Immunology laboratories deliver the highest quality testing while fostering a positive and collaborative work environment. What You'll Do: • Oversee all aspects of the Chemistry and Immunology labs, ensuring efficient operations and adherence to regulatory standards., • Lead and mentor a team of scientists, providing training, guidance, and performance feedback., • Champion continuous quality improvement initiatives and ensure accurate and timely test results., • Collaborate with physicians on interpreting test results and recommending follow-up actions., • Develop and implement effective laboratory workflows and utilize laboratory software efficiently., • Maintain a safe and compliant work environment for staff and patients., • Stay current on industry trends and best practices in laboratory medicine., • Participate in hospital committees and task forces to drive positive change. What We're Looking For: • Bachelor's degree in Clinical Technology or a related science with a minimum of 6 years of relevant hospital experience (Master's degree in Clinical Chemistry preferred)., • ASCP or NCA certification (preferred)., • Current NYS licensure or eligibility for licensure required., • Strong leadership and supervisory skills with a proven track record of success., • Excellent communication, collaboration, and problem-solving skills., • Commitment to quality, patient care, and staff development., • Proactive and detail-oriented with a focus on safety and compliance. Why Choose Us? • Competitive salary and benefits package., • Opportunity to make a significant impact on patient care., • Supportive and collaborative work environment., • Commitment to professional development and growth. Ready to Lead? If you're a highly motivated laboratory professional with a passion for excellence, we encourage you to apply!

Job Description Shop Mechanic - Larchmont, NY This opportunity is with a company that is a Regional Leader in Load Bank Testing and Rental of Mechanical and Electrical Equipment in the Critical Facilities Environment. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Their Service Offering supports Critical Facilities / Data Centers for the Hyperscale, COLO, and Enterprise Data Center Market. A fully competent Shop Mechanical / Electrical Technician applies an intensive and diversified knowledge of complete HVAC start-up, testing and operations. Responsible for maintaining and providing emergency support on critical cooling units including but not limited to chillers, cooling towers, CRAC and CRAH units, air handler units, and other HVAC equipment onsite primarily at HQ and occasionally at customers' sites within regional area. Will be involved in preventive maintenance, emergency response, equipment start-up. Candidate will work at the company's headquarters testing equipment or rebuilding older systems. Discuss with technical support problems related to maintenance or operation of equipment. Consults with supervisor concerning unusual problems and developments. Responsibilities: • Check-in rental equipment upon return/termination of rental to ensure all equipment is returned in satisfactory condition, • Perform Preventative maintenance on rental equipment to include operations and appearance, • Maintain cable inventory to include inspection of condition/testing/repairs if needed and ensuring all cables are kept in a clean & orderly condition, • Perform testing on rental equipment to ensure that the equipment is available and ready-to-rent at all times, • Troubleshoot and repair equipment found to not be operating as intended, • Travel to customer sites to troubleshoot and repair problematic rental equipment in the field (on occasion), • Fill in and maintain test documents/reports, • Maintain shop and storage areas in a neat, clean and orderly condition, • Deliver and pick-up equipment as needed, • Assist customers as needed to ensure that rentals run as smooth as possible, • Maintain all shop equipment in good, safe working order, • Assist with shop projects which will include but are not limited to fabrication of new equipment and upgrades to existing equipment, • Load and unload rental equipment on company vehicles, customer vehicles, and 3rd party carrier vehicles, • Assist in design and fabrication but not limited to accessories, cable sets, pigtails enclosures and shipping cages, • Must be RELIABLE!!!!, • Preferably 2-6+ years' experience in Mechanical and Electrical field and ability to troubleshoot down to component level on equipment such as CRAC, CRAH, Air Handlers, Chillers, Cooling Towers, etc, • Possess general knowledge of experience working with electrical equipment a plus: UPS, batteries, PDU's / Power Distribution Units, Static Automatic Transfer Switches, Branch Circuit Monitoring, and other electrical equipment, • Must be able to understand one line drawings and schematics, • Must understand Electrical / Mechanical Theory, • Journeyman or Master HVAC License a HUGE plus, • HVAC OEM factory training or hands on experience in Trane, Liebert, Stultz, and other major HVAC brands a MUST, • Experience with Liebert DX units a HUGE plus, • CFC / EPA Universal Certification a HUGE plus, • Utilizes hand tools and test equipment to perform work, • Must be able to provide high level of quality customer service, • Requires knowledge of equipment manufacturer's specifications, • Ability to work independently and resourceful, • Knowledge of general computer hardware & software applications, • Requires excellent verbal, written communication skills & customer relation skills, • Have a high school diploma / Technical degree a plus, • Be able to fill out logs/test sheets, • Be willing to travel on occasion to job sites to perform work. After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionSenior Mold Designer & Toolmaker Location: Westchester County NYEmployment Type: Full-Time Position OverviewWe are seeking an experienced Senior Mold Designer & Toolmaker to join our aerospace and defense electronics manufacturing team. This critical role supports the production of ultra-miniature transformers, inductors, power supplies, and magnetic components for military, aerospace, and mission-critical applications. The successful candidate will design and fabricate precision tooling for components that operate in extreme environments, from Mars rovers to submarine systems, requiring exceptional reliability and miniaturization expertise. Key ResponsibilitiesDesign & Engineering • Design and develop ultra-precision injection molds and tooling for miniature magnetic components, • Create tooling for transformer housings, inductor enclosures, and power supply modules with dimensions as small as 0.31" x 0.31" x 0.34", • Develop micro-molding solutions for components operating from -55°ree;C to +130°ree;C temperature ranges, • Design tooling for hermetic sealing applications requiring 100% vacuum impregnation processes, • Engineer solutions for molding around delicate magnetic cores, windings, and electronic assemblies, • Create precision tooling for surface mount and through-hole magnetic component packaging, • Design automated potting and encapsulation systems for extreme environment protectionUltra-Miniature Component Manufacturing, • Fabricate tooling for components with wire gauges as fine as 52 AWG (less than 0.001" diameter), • Develop solutions for molding magnetic shields and EMI suppression components, • Create precision fixtures for high-voltage applications up to 10,000V ratings, • Design tooling for power components ranging from 0.75W to 300W in ultra-compact packages, • Engineer solutions for military-grade reliability requirements (MIL-PRF-27, MIL-STD-202), • Support manufacturing of components for QPL (Qualified Products List) certificationAdvanced Precision Manufacturing, • Execute micro-machining operations for ultra-miniature component tooling with tolerances to ±0.0001", • Operate CNC machining centers for precision cavity work in transformer and inductor molds, • Manage wire EDM processes for intricate details in magnetic component housing tools, • Implement specialized surface finishing for optimal magnetic field performance, • Maintain dimensional accuracy for components requiring 300+ thermal cycle reliability, • Execute precision assembly and testing of complex multi-cavity tooling systemsMilitary & Aerospace Quality Standards, • Ensure all tooling meets stringent military and aerospace manufacturing standards, • Implement quality control processes for components destined for fighter aircraft, spacecraft, and submarine systems, • Support manufacturing processes for components used in guidance systems and space applications, • Maintain traceability and documentation requirements for defense contractor specifications, • Coordinate with quality assurance for first article inspection and ongoing production validation, • Support customer audits and certification processes for aerospace and defense applicationsSpecialized Manufacturing Processes, • Design tooling for vacuum impregnation and potting processes unique to magnetic components, • Develop solutions for handling and molding magnetic materials and ferrite cores, • Create automated systems for precise winding insertion and core placement, • Engineer tooling for specialized lead configurations (gull wing, J-lead, surface mount), • Support manufacturing of components for harsh environments including space, underwater, and high-vibration applicationsQualifications:Technical Skills, • CAD/CAM Systems: Advanced proficiency in SolidWorks, MasterCam, and precision design software, • Micro-Machining: Expert-level skills in ultra-precision CNC programming and operation, • EDM Operations: Extensive experience with wire EDM for micro-scale component features, • Materials Science: Understanding of magnetic materials, ferrites, potting compounds, and high-temperature plastics, • Quality Systems: Knowledge of MIL-STD standards, QPL requirements, and aerospace quality protocols, • Measurement Systems: Proficiency with CMM, optical measurement, and micro-dimensional inspectionEducation, Training & Qualifications, • Required: Technical diploma/certificate, completed apprenticeship, or equivalent hands-on training, • Preferred: Technical degree in Mechanical Engineering, Manufacturing Engineering, or Materials Science, • Minimum 10+ years of progressive experience in precision mold design and toolmaking, • Specialized training in magnetic component manufacturing or aerospace electronics preferred, • Familiarity with defense contractor requirements and security protocols preferred, • Experience with magnetic component design and electromagnetic field considerations, • Competitive salary commensurate with experience ($90,000 - $100,000+ depending on qualifications and clearance level), • Comprehensive health, dental, and vision insurance with premium coverage, • 401(k) retirement plan with generous company matching, • Performance-based bonuses tied to mission-critical program success

Managing and monitoring all installed security systems and infrastructure.Installing, configuring, testing and maintaining security systems, application software and system management tools.Ensuring the highest levels of systems and infrastructure availability from security and cyberattack incidents

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. About the Role Are you ready to grow your career in vehicle maintenance? First Student is hiring a skilled Technician II to keep our fleet running safely and reliably. In this hands-on role, you'll perform a mix of routine and advanced mechanical work on school buses, vans, and other vehicles, while working under moderate supervision. You'll also support senior technicians and help guide junior team members. If you have solid mechanical skills, take pride in safety and organization, and are looking for an opportunity to advance-this could be the role for you. $25.00/hr What You'll Do * Perform preventative maintenance, visual inspections, and minor repairs (bulbs, belts, fluids, filters, batteries, hoses, etc.) * Complete more advanced mechanical repairs under moderate supervision-brakes, tune-ups, suspension, clutches, drive trains, and more * Assist Technician III with PMs, safety checks, and major component replacements (engine, transmission, differential) * Diagnose and troubleshoot vehicle and equipment issues with accuracy * Respond to road calls and emergency repairs as needed * Maintain accurate records of completed work, including parts usage and work orders * Move vehicles safely around the yard and maintain a clean work environment * Help maintain and repair shop equipment * Clean vehicles as requested * Follow all company safety policies and procedures What We're Looking For * High school diploma or GED preferred * Vocational or technical certification in vehicle repair preferred * 3+ years of diesel or automotive repair experience (or equivalent education/experience) * Valid driver's license * Class B CDL with passenger endorsement (or ability to obtain within 3 months) * ASE Certification preferred; must participate in ASE testing and obtain 3 ASE certifications within 12 months * Intermediate mechanical and diagnostic skills * Ability to work independently and as part of a team * Organized, detail-oriented, and safety-focused * Comfortable with hand tools and diagnostic software * Strong communication and customer service skills * Must have personal tool inventory suitable for the role Physical Requirements * Must be able to lift at least 50 pounds * Ability to work in all weather conditions and in shop environments with dust, grease, and noise * Must be able to work in crouched or prone positions using a creeper under vehicles Why Join First Student? * Competitive pay and potential shift premiums * ASE certification support and career growth opportunities * Positive and safety-first work environment * Nationwide footprint with room to advance Keep our fleet moving-and our communities safe. Apply today and take the next step in your mechanic career! In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1135B - White Plains, NY

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1224B - New Rochelle, NY

Job Description Chef Operator [Executive Chef/General Manager] COMPENSATION: Salary Range: $80,000-85,000/year with annual increase + quarterly bonus with high growth potential PERKS AND BENEFITS: • 16 weeks of Fully Paid Parental Leave (for primary and secondary caregivers), • Health Insurance (Medical, Dental, and Vision), • Paid Time Off, • 401K Program, • Phone Reimbursement, • Commuter Benefits, • Complimentary DIG Meals every day As a Chef Operator, you will build a team that is driven by culinary excellence, and lead them to new skills in our scratch-based kitchen. You are a dynamic leader who loves to train, mentor, and develop your teams into future leaders by teaching them new skills everyday and showing up as your best self. You're an achiever who has a strong sense for operations and is driven by results. In our operation centered around innovation, you are always looking at business from a strategic, and systematic lens to set you and your team up for success. Staying organized while managing logistics and thinking big picture in a fast paced environment is key to your role as Chef Operator. We are constantly evolving our menu and testing new initiatives to improve our business operations. You will effectively manage, delegate and multitask to ensure your team is well equipped to handle any new challenge. You will clearly communicate and uphold culinary standards, roll out new projects/initiatives, and keep up with all DOH guidelines, all while inspiring your team to work towards a better food future. You are responsible for managing the entire restaurant operation and maintaining oversight over all front-of-house and back-of-house ops. ABOUT THE TEAM: Our Restaurants run using a traditional brigade system. As the Chef Operator, you are the first in command and have a true sense of ownership over your restaurant. You partner directly with the Chef de Cuisine to drive success and report to the Field Leadership Team. You work collaboratively with the other restaurant leaders to ensure the restaurant team is well-trained and organized to provide guests with an experience that goes beyond a great meal. DIG is determined to help support the next generation of farmers, cooks and chefs! YOU WILL: • Be responsible for the entire restaurant operation, including PnL responsibilities such as food cost management, labor efficiency, guest experience and building top-line sales., • Collaborate with the CDC on QA processes and convert guest feedback into actionable insights for the team., • Manage new initiatives and scheduled launches within the restaurant while instilling an entrepreneurial spirit in your team to keep them excited and engaged., • Monitor the operational flow of the restaurant, ensuring culinary and DOH standards/protocols are being followed and executed., • Manage all problems with technology, systems and/or offsite ordering platforms. You are proactive in troubleshooting and can handle all the moving pieces with ease., • Be the face of hospitality by both interacting with guests and delivery drivers to provide exceptional service and training up concierge roles in the restaurant to do the same., • Ensure that all employee relations conversations are properly documented and communicated to HR, including performance and GROW model conversations., • Manage recruitment needs for your restaurant by proactively interviewing, hiring and onboarding new culinarians., • Review & collaborate on people development plans with the Field Leadership team to build thoughtful succession plans., • Communicate verbally and digitally on a daily basis across various systemic and conduct Pre-shifts & Chef's tables with your restaurant team to keep them informed on updates and new restaurant goals., • 3 - 5 years minimum kitchen or operational restaurant management experience., • A passion for real, good food and the leadership skills to operate a scratched base, every changing kitchen., • The willingness to roll up your sleeves and pitch in whenever and wherever necessary., • The demonstrated skills to motivate and develop a high-performing team., • The discipline and desire to create systems and organization within fast changing environments., • Excellent communication skills and an eye for detail., • Strong computer skills. You can navigate multiple digital ordering systems with ease., • Ability to learn technological platforms and work systematically with them., • Familiarity with restaurant costing and inventory software., • The ability to perform physical requirements of the position (the ability to frequently lift up to 25 pounds and occasionally lift up to 50 pounds). These physical requirements may be accomplished with or without reasonable accommodations., • The desire for professional improvement and the process of learning., • The drive to network and build strong ties in your restaurant's community., • The ability to take many variables to find the best solution to a problem. Salary Range: $80,000-85,000/year with annual increase + quarterly bonus with high growth potential Our salary ranges are rooted in the desire to pay competitively relative to our organization size and industry, reflecting just one part of the total compensation package; additional components include quarterly bonus potential, healthcare benefits, various work perks (commuter benefits, free lunch) as well as opportunities for continued growth at DIG. Individual compensation decisions are determined by factors that include skills-based qualifications, prior work experience, and balancing internal equity relative to other DIG employees. We expect the majority of candidates who are offered roles at DIG to fall healthily within the ranges based on these factors ABOUT US: To learn more about our mission and food please visit our website at: NOTE: DIG believes in the power of a shared table to bring people together as we are committed to building a culturally inclusive team. Female, LGBTQ+, BIPOC, and diverse candidates are encouraged to apply ADDITIONAL ROLE NOTES: The duties of this position may change from time to time. Dig reserves the right to add or delete duties and responsibilities at the discretion of Dig or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Dig is proud to be an Equal Opportunity Employer. We do not discriminate on the basis of race, age, ancestry, creed, color, religion, gender, sexual orientation, pregnancy, childbirth, breastfeeding or related condition, unemployment status, gender identity or expression, transgender status or gender dysphoria, marital status, domestic violence, sexual violence or stalking victim status, national origin, citizenship, disability, covered veteran and/or military status, genetic information or predisposing genetic characteristic, familial status as that term is described under the New York State Human Rights Law, caregiver or partnership status as those terms are defined under the New York City Human Rights Law (if you are employed in New York City) or other protected status or any other characteristic as protected under applicable federal, state and local law ("Protected Status")