Trabajos staff software engineer en Rochester, New YorkCrear alertas

Job Description Job Title: QED Optics Manufacturing Engineer Grade: 10 QED Technologies serves the precision optics industry. QED’s customers span the globe and include the world’s leading precision optics manufacturers. Based in Rochester, NY, QED is able to capitalize on the area's academic and industrial resources in the field of precision optics manufacturing and engineering to provide innovative products that set new standards in manufacturing precision optics. Please visit our web site https://qedtech.com for more information on QED Technologies. Summary Conducts the manufacture of precision optical components for a wide variety of customers by performing the following duties: Quoting • Works closely with customers to gain an understanding of their technical and schedule needs, the details of their application, and any cost / performance trades., • Creates an engineering estimate for pricing and lead time that will be used to generate a quotation. Manufacturing Engineering • Creates work instructions and monitors their execution by technician staff during optical component fabrication, • Independently executes production work instructions from start to finish, • Drives manufacturing process efficiencies through process parameter optimization, • Designs metrology setups to support full aperture metrology of optical components, including fixturing and tooling that may be required. Develops error budgets to validate optical tests against customer requirements., • Analyzes surface/wavefront data acquired from various metrology setups to optimize process decisions., • Designs fixturing and tooling to support subaperture polishing processes, • Trains others on the proper use and application of metrology and subaperture polishing equipment, • Enters and maintains production order status in QED ERP system Project-based Activities • Interacts with other engineering groups (software, systems, optical, mechanical, applications, etc) as needed to support project goals., • Prepares written technical reports and new technical proposals as needed for projects., • Interacts with customers to provide periodic status updates and support technical discussions., • Takes part in authoring technical papers and presenting at conferences., • Independently executes small projects as well as individual tasks on larger projects. Qualifications An individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Critical Skills: • Ability and experience with hand tools, measurement devices (calipers, Micrometers, Indicators, Gages etc)., • Understanding of metrology setups and conventional fabrication techniques, • Ability to draft work procedures and coordinate with technicians regarding processes and process improvements, • Independently design, perform, analyze and communicate results of process improvements Education and/or Experience Bachelor's degree in Optics, Optical Engineering, Mechanical Engineering or Manufacturing Engineering or related field is preferred; 1 to 2 years of related experience in the aforementioned areas is desired*. (* An equivalent combination of education and experience will be considered.). Computer Skills To perform this job successfully, an individual should have knowledge of the Microsoft Office Suite and Database software. Experience with CAD software to support fixture and tooling design is desired. The manufacturing engineer will be expected to become proficient with QED’s manufacturing and analysis software tools. The candidate should be able to provide a minimum of 2 references. Any technical papers a candidate has authored should also be submitted The position will be based in Rochester, NY. Relocation will not be provided for this position. QED Technologies International is an equal opportunity employer. We value diversity, but due to our ITAR status, we do not provide visa sponsorship. All applicants must be authorized to work in the United States and not require visa sponsorship now of in the future. When not traveling, the Associate Field Service Engineer will be expected to work from the 1040 University Avenue, Rochester, NY location QED offers a generous benefit package which in includes a discretionary bonus.

Job DescriptionDescription: ABOUT US Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled most of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson’s BIM (Building Information Modeling) Designer III serves as a senior expert, utilizing cutting-edge BIM software and methodologies to oversee electrical design, coordination, and execution in highly complex commercial and industrial construction projects. This role entails leading cross-functional teams, including architects, engineers, project managers, and subcontractors, to produce sophisticated 3D models, anticipate and resolve intricate clashes, and ensure optimal integration of electrical systems. The BIM Designer III will spearhead initiatives to maximize project efficiency, drive significant cost savings, and eliminate on-site errors through innovative digital modeling strategies, while providing mentorship, strategic guidance, and championing the organization's core values across the team. RESPONSIBILITIES • Lead comprehensive model setup tasks, including developing custom templates, standards, and workflows for large-scale projects., • Design, implement, and refine advanced tags, annotations, and parametric families to support dynamic model functionality and automation., • Expert-level mastery of Revit families, encompassing custom creation, advanced editing, and seamless integration in multifaceted Revit ecosystems., • Independently create and refine detailed 1-line and 3-line drawings, incorporating regulatory compliance, engineer input, and innovative design solutions., • Oversee complex Revit circuiting, panelboard schedules, and sophisticated scheduling tools, provide guidance to engineers and ensure accuracy., • Direct equipment layout/clearances, integrating submittal reviews, code adherence, and multi-disciplinary coordination to optimize system performance., • Spearhead modeling of intricate conduit and cable tray pathways, hangers/support systems, sleeves/penetrations, MEP coordination, section drawings, (3D) drawings, underground coordination, and lighting layouts with strategic oversight., • Perform advanced clash detection, resolution, and federated model management using Navisworks, while leading coordination meetings and BIM forums., • Mentor BIM Designer I and II team members, conducting training on advanced techniques, software optimization, and best practices., • Develop and enforce BIM execution plans, company-wide standards, and continuous process improvements to elevate team performance., • Incorporate and advocate for renewable energy systems, sustainable design practices, and emerging technologies into project models., • Analyze model data for insights on project metrics, risk assessment, and value engineering opportunities. ABOUT YOUR QUALIFICATIONS Education and Experience: • Minimum of 6+ years of experience in BIM modeling, with extensive expertise in electrical contracting or MEP (Mechanical, Electrical, Plumbing) sector for large-scale commercial and industrial projects., • Bachelor's Degree in Electrical Engineering, Construction Management, Architecture, or a related field is required; Master's degree or advanced certifications are preferred., • Advanced certifications (e.g., Autodesk Certified Professional in Revit, Navisworks, BIM Management, or equivalent) are essential., • Expert proficiency in BIM software including Revit MEP, Navisworks, BIM 360/ACC, and advanced tools like Bluebeam, Dynamo, or similar for automation and model validation. Technical Skills: • Advanced proficiency with Microsoft Office Suite (Word, Excel, Outlook) for in-depth documentation, reporting, data analysis, and presentations., • Expert proficiency in drawing software (e.g., Revit and AutoCAD), including scripting, automation, and plugin development., • Mastery of 3D modeling, visualization, rendering, and virtual reality integration techniques., • Expert data management and interoperability (e.g., IFC file formats, API integrations, and data exchange protocols)., • In-depth knowledge of electrical systems design, National Electrical Code (NEC), and advanced commercial construction practices., • Proficiency in interpreting, modifying, and creating construction drawings, specifications, and submittals., • Strong experience with renewable energy systems, sustainable design practices, and LEED/BREEAM standards. Soft Skills: • Exceptional problem-solving skills and ability to manage multiple complex tasks simultaneously., • Proven leadership and mentorship abilities to guide junior staff and contribute to team development., • Excellent communication and interpersonal skills to collaborate with clients, contractors, and internal teams, including presenting model insights., • Solid organizational and time management skills to prioritize tasks, meet deadlines, and handle project timelines., • Flexibility to adapt to adjusted work schedules, including overtime or evening/weekend hours, to meet project demands., • Openness to constructive feedback and commitment to continuous improvement in job performance., • Readiness to learn and master advanced BIM tasks, software updates, and emerging technologies., • Willingness to learn and develop skills in various BIM tasks, software, and equipment. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage. Requirements: ABOUT YOUR QUALIFICATIONS A bachelor's degree in electrical drafting, drafting design, electrical engineering, or similar preferred. A minimum of two years' experience as an electrical drafter. American Design Drafting Association (ADDA) certification is preferred. Proficiency with CAD software, such as AutoCAD, Revit, and SolidWorks. Excellent understanding of a range of electrical generation and transmission systems. Thorough knowledge of electrical safety regulations, building codes, and health standards. Strong critical thinking and problem-solving skills. Strong interpersonal and managerial skills. The ability to stay up to date with the latest developments in electrical systems and best practices. Strong communication skills and collaborative abilities. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage.

Job DescriptionSalary: $130,000-$160,000 Annually The Opportunity: As a Inertial Navigation Systems Engineer you will be responsible for leading the innovation, pursuit, and execution of US Government and DoD technology development in Inertial Navigation Systems with an emphasis on driving growth of the IMU and INS business to support Safran Federal Systems and Safrans long term sales goals. Our Technology: Safran Federal Systems providesResilient Positioning, Navigation and Timing (R-PNT) solutions and custom engineering services to U.S. Government agencies, defense organizations and their contractors. Safran Federal Systems is authorized to work on the full spectrum of U.S. Government classified and unclassified projects, in addition to supporting strategic partnerships for key defense PNT technologies. Job Responsibilities: • Integrate Safran inertial navigation hardware within the laboratory environment; Test and evaluate system functionality and performance., • Utilize experience with electronic test equipment and software test tools to troubleshoot hardware; Lead the timely resolution of problems without guidance., • Work directly with customers to help integrate Safran inertial sensors and navigation systems into commercial and/or military applications., • Establish test methods and procedures and execute the testing of inertial sensors and inertial navigation systems. Analyze data and use data to validate system performance; Generate reports and presentations based on test results., • Leverage a strong technical background in avionics and electronics systems enabling interaction with customers systems engineers, hardware/electrical/software engineers, and other technical staff members., • Develop new Government and DoD business, directly with the Government and indirectly through large system integrators through a thorough understanding of the factors that are critical to success of the customers mission., • Travel within the U.S. to meet with customers. What You Bring to Safran Federal Systems: • Minimum of 6 years of experience in avionics hardware integration, especially related to navigation systems., • Masters degree or equivalent in Electrical or Aerospace Engineering is preferred., • Hands-on experience with military and/or avionics hardware and familiarity with equipment wiring standards and practices is required., • Familiarity with system requirements and related verification and validation methods., • Experience with military and civil qualification standards for hardware and software., • Demonstrated ability to process, analyze, and present inertial system test results., • Technical writing skill and experience academic thesis, peer-reviewed journal articles, conference proceedings, project reports; ability to support technical writing with high quality graphics/ charts/ schematics, • Speaking/ Presentation/ Dialogue Skills white board, small and large group presentations; high degree of comfort speaking senior military and staff personnel; ability to communicate effectively with both technical and non-technical individuals; intuitive ability to pivot from presentation to dialogue as appropriate, • Demonstrable Strong customer focus, ownership, urgency and drive., • Demonstrated ability to adapt to new technologies and learn quickly., • Self-motivated, and ability to prioritize effectively to achieve goals, comfortable with ambiguity, • High level of skill communicating effectively across internal and external organizations, both verbally and in writing, • Experience in Sales Development, Prospecting, Qualifying, Negotiating, and Understanding informal decision-making structures, • Ability to travel up to 50% both internationally and domestically., • Secret level security clearance a preferred., • French language skills a preferred., • Proficient in Positioning, Navigation and Timing technologies or related high-tech industry preferred., • Ability to perform the essential functions of the role with or without reasonable accommodation, in accordance with the Americans with Disabilities Act (ADA), • Commitment to supporting an inclusive and accessible work environment, including participation in reasonable workplace accommodations processes as needed, • Ability to engage effectively in work activities that may include laboratory, integration, or field environments, with reasonable accommodation provided where applicable under ADA guidelines. About Safran Federal Systems: Safran Federal Systems has been awarded as aWinner of the USA Today and Rochester Metro Area Top Workplaces 2025 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press releasehere. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Title Senior Manufacturing Engineer Department Manufacturing Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Senior Manufacturing Engineer provides technical leadership and manufacturing support for various precision optics operations, with responsibility for process development, production support, and continuous improvement across multiple manufacturing lines. This role works closely with production, quality, and engineering teams to improve process stability, reduce waste, increase throughput, and support the successful transition of products from prototype through volume production. The position plays a key role in developing standardized manufacturing methods, troubleshooting complex production issues, and implementing process improvements that enhance quality, repeatability, and operational efficiency. Success in this role requires strong technical judgment, hands-on problem-solving ability, and experience working within a precision manufacturing environment. Key Responsibilities: • Provide technical leadership and manufacturing support across multiple precision optics production lines., • Develop, implement, and maintain standardized manufacturing processes, work instructions, and process documentation to support consistent and repeatable production., • Lead troubleshooting and root-cause analysis efforts related to production and process issues impacting quality, yield, or throughput, • Support the transition of products from prototype and engineering development into stable volume production environments., • Design, develop, and implement tooling, fixtures, and process improvements to increase efficiency, improve repeatability, and reduce scrap and cycle time., • Analyze production data and process metrics to identify trends, improve process capability, and support data-driven manufacturing decisions., • Partner closely with production, quality, and engineering teams to resolve manufacturing challenges and improve operational performance., • Lead or support manufacturing projects and capital improvement initiatives, including scope definition, implementation, validation, and follow-through., • Train and provide technical guidance to production personnel, technicians, and junior engineering staff as needed., • Ensure manufacturing processes comply with internal quality standards, customer requirements, and applicable regulatory or documentation requirements. Required Qualifications: • Bachelor’s degree in mechanical, Manufacturing, Industrial, Optical, Aerospace Engineering, or a related engineering discipline., • Minimum 10 years of manufacturing engineering experience within a precision manufacturing environment, preferably supporting optical assembly or other high-precision production processes., • Strong understanding of manufacturing process development, process control, troubleshooting, and continuous improvement methodologies., • Experience supporting production environments, including root-cause investigation, yield improvement, cycle time reduction, and process optimization., • Proficiency interpreting engineering drawings, specifications, and Geometric Dimensioning & Tolerancing (GD&T) requirements., • Hands-on experience with fixture/tooling development and manufacturing process documentation., • Experience with 3D CAD modeling software; SolidWorks preferred., • Strong analytical capability with experience using production data and process metrics to support decision-making and process improvement., • Working knowledge of Lean Manufacturing principles; Six Sigma experience or certification is beneficial., • Experience working within ISO-regulated manufacturing environments; familiarity with ITAR-controlled manufacturing environments is a plus., • Experience supporting prototype-to-production transitions and manufacturing scale-up activities preferred. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands: • Works in a precision manufacturing environment supporting optical assembly and production operations, with regular time spent on the manufacturing floor and in engineering or office settings., • Frequent interaction with production personnel, manufacturing equipment, tooling, and assembly processes in support of troubleshooting, process development, and continuous improvement activities., • Requires prolonged periods of standing, walking, and moving throughout production areas, with occasional sitting for engineering, documentation, and project-related work., • Regular use of hands for computer work, documentation, handling components, tooling, fixtures, and measurement equipment., • Requires visual acuity for reviewing technical documentation, inspecting components and assemblies, and supporting process verification activities., • Exposure to typical manufacturing conditions, including moving mechanical equipment, moderate noise levels, airborne particles, cleaning agents, adhesives, oils, and solvents., • Required use of personal protective equipment (PPE), including safety glasses and cleanroom or controlled-environment garments, as required by specific production areas., • Occasional lifting or movement of materials, tooling, fixtures, or equipment, typically up to 50 pounds., • May require schedule flexibility or extended hours to support production priorities, troubleshooting activities, or project implementation deadlines. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. This position is scheduled for Monday through Friday, 7:00 AM – 3:30 PM. As a senior-level role supporting production operations, occasional flexibility outside normal business hours may be required to support manufacturing priorities, project implementation, troubleshooting activities, or critical production needs.

Job Description QUALITY ENGINEER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are looking for a Quality Engineer to monitor and improve the quality of our operational processes and outputs. The Quality Engineer’s responsibilities include designing quality standards, equipment, process, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures. A successful Quality Engineer should have excellent troubleshooting skills and be able to ensure that processes and products consistently meet established quality standards. DUTIES & RESPONSIBILITIES: • Review customer quality specification/PO flow downs, codes and technical design documents/drawings to provide an accurate inspection plan., • Participate in contract review meetings to initiate and advise on inspection plans., • Utilize HQA Inspection Manager software to bubble drawings, create FAI reports, and identify critical dimensions to be verified and recorded on an in-process inspection report., • Develop quality plans for manufacturing based on customer RFQ., • Collaborate with operations managers to develop and implement controls and improvements., • Ensure that workflows, processes, and products comply with safety regulations., • Investigate and troubleshoot product or production issues., • Develop corrective actions, solutions, and improvements., • Monitor and analyze quality performance., • Update our Quality Management System (QMS) with incidents, fixes and improvements., • Manage calibration system in Inspection Manager Software., • Assign gauging to check critical dimensions., • Work with customers regarding quality questions and issues. SKILLS & QUALIFICATIONS: • Hands on experience with Quality Management Systems (QMS) and testing methodologies., • In-depth understanding of technical documentation., • In-depth understanding of machining and sheet metal fabrication including print reading and GD&T., • Strong analytical and problem-solving skills., • Excellent project management skills., • Solid computer and organizational skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Superior communication skills and ability to develop teamwork among staff., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • High school diploma or GED., • 5 years of experience in Quality Engineering, Quality Assurance, or a similar role., • Additional certification in Quality Assurance is a plus. JOB BENEFITS: • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with company match According to the New York Pay Transparency law, pay range for this job is $25.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week) Monday through Friday 7:30 am to 4:00 pm Full-Time employment (39.75 hours per week)

Job Description Title Manufacturing Engineer Department Manufacturing Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: As a Manufacturing Engineer, you’ll play a critical role in turning innovative designs into efficient, high‑quality production. You’ll optimize workflows, equipment layouts, and assembly methods to maximize throughput while ensuring products meet exacting standards. Working closely with engineering, production staff, and other manufacturing support personnel, you’ll lead the transition from prototype to volume manufacturing and drive continuous improvements that reduce costs, increase efficiency, and elevate performance. This role blends technical expertise with project leadership, making you a key force in shaping the future of our manufacturing operations. Key Responsibilities: • Lead manufacturing projects end‑to‑end — from planning and scope definition through execution and delivery., • Translate goals into actionable plans by defining tasks, resources, timelines, and success metrics., • Develop and manage detailed project schedules and budgets, ensuring milestones are met on time and within cost targets., • Coordinate cross‑functional teams to align priorities, resolve resource conflicts, and maintain accountability., • Monitor progress with the right tools, tracking deliverables and proactively addressing risks or roadblocks., • Partner with quality assurance to confirm specifications, documentation, and compliance before product release., • Communicate clearly with stakeholders, providing regular updates, reports, and solutions to challenges., • Implement process changes and improvements that enhance efficiency, reduce costs, and strengthen output quality., • Evaluate project outcomes to capture lessons learned and drive continuous improvement across manufacturing operations. Required Qualifications: • Bachelor’s degree in Mechanical, Manufacturing, Industrial, Optical, or Aerospace Engineering. (other closely related engineering disciplines may be considered)., • 3 - 5 years of experience in manufacturing engineering within a precision manufacturing environment, preferably supporting high-precision production processes., • Strong proficiency in Geometric Dimensioning & Tolerancing (GD&T) methods., • Hands‑on experience with 3D modeling software; SolidWorks strongly preferred., • Advanced skills in Microsoft Excel for data analysis and reporting., • Proven ability to read, analyze, and interpret complex technical documents and specifications., • Excellent communication skills with the ability to collaborate effectively across engineering, production, and management teams., • Background in optical assembly processes and precision optics manufacturing techniques a plus. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands: • Works in a precision manufacturing environment supporting optical assembly and production operations, with regular time spent on the manufacturing floor and in engineering or office settings., • Frequent interaction with production personnel, manufacturing equipment, tooling, and assembly processes in support of troubleshooting, process development, and continuous improvement activities., • Requires prolonged periods of standing, walking, and moving throughout production areas, with occasional sitting for engineering, documentation, and project-related work., • Regular use of hands for computer work, documentation, handling components, tooling, fixtures, and measurement equipment., • Requires visual acuity for reviewing technical documentation, inspecting components and assemblies, and supporting process verification activities., • Exposure to typical manufacturing conditions, including moving mechanical equipment, moderate noise levels, airborne particles, cleaning agents, adhesives, oils, and solvents., • Required use of personal protective equipment (PPE), including safety glasses and cleanroom or controlled-environment garments, as required by specific production areas., • Occasional lifting or movement of materials, tooling, fixtures, or equipment, typically up to 50 pounds., • May require schedule flexibility or extended hours to support production priorities, troubleshooting activities, or project implementation deadlines. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. This position is scheduled for Monday through Friday, 7:00 AM – 3:30 PM. As a professional engineering role supporting production operations, occasional flexibility outside normal business hours may be required to support manufacturing priorities, project implementation, troubleshooting activities, or critical production needs.

Job Description Controls Design Engineer About Micro Instrument Corp Micro Instrument Corp provides a progressive and positive work environment. We value our employees and encourage both personal and career growth. Our advanced technology environment presents employees with challenging and satisfying work backed by our core values of hard work and respect in an inclusive environment of diverse, committed and highly accomplished people. Micro Instrument Corp offers employees a compelling package, which includes competitive pay, superior benefits, an outstanding work environment and opportunities for career development. Through these comprehensive offerings, every individual has the chance to achieve significant growth, both financially and professionally. Controls Design Engineer The Controls Design Engineer is responsible to engineer, design and integrate controls applications into automation equipment, tooling, fixtures, and gages. The Controls Design Engineer will assist applications engineers with customer concepts when required. They will also work with mechanical engineering and project management to ensure Micro’s customer design specifications are satisfied. The Controls Design Engineer will report to the Director of Engineering. Position Responsibilities: · Develop the controls design schematics in AutoCAD which includes electrical, pneumatic, and hydraulic design where applicable. · Interpret mechanical design drawings to ensure the correct controls hardware is implemented and the system can be assembled from a controls standpoint (e.g., SolidWorks Viewer). · Research supplier products for assembly components that will improve future machine builds. · Help establish new standards, along with maintaining existing standards. · Develop electrical, pneumatic, and hydraulic bills of materials where applicable. · Power electrical systems and configure hardware per application specifications. · Work closely with controls and mechanical build technicians. · Develop concepts with application engineers for customer equipment in the quoting phase based on customer supplied specifications and accurately quote the concept from a component and labor standpoint. · Design systems that meet or exceed customer specifications. · Design systems and develop equipment operation software that meets or exceeds customer specifications. · Design and develop software applications based on given requirements, specifications, and sequence of operations. · Understand client requirements for GUI/communication interface and networking. Create specifications and design to these requirements. · Troubleshoot issues with existing systems currently installed at customer facilities. · Develop documentation for systems to assist the end user in startup, troubleshooting, machine operation, recommended maintenance and provide a list of recommended spare parts. · Participate in Factory Acceptance Testing and Site Acceptance Testing, which may require some overnight travel if necessary. · Provide timely and detailed status updates. · Ensure standards are maintained in a highly regulated, process driven environment. · Help train/orient/on-board new employees. Job Qualifications: · BA/BS degree in Engineering or related discipline (BSEE degree preferred) · Preferably 5+ years of experience in the automation industry · Must be able and willing to travel and work at customer sites if necessary · Proficient in Design/Drafting Tools (e.g., AutoCAD, SolidWorks Viewer) · Proficient in developing software for programmable logic controllers (PLC) (e.g., Allen-Bradley, Siemens) · Configuring and designing HMI/OIT systems (e.g., Allen-Bradley, Siemens, National Instruments, Maple Systems) · Familiar with industry standards, NEC, NFPA, UL and CE · Familiar with vision systems (e.g., Cognex, Keyence) · Familiar with various Motion Controllers/Actuators (e.g., Allen-Bradley Kinetix, Siemens Simotion, IAI, Yasakawa) · Familiar with robotic systems (e.g., Fanuc, Epson, Yamaha, Staubli) · Experience and skill in troubleshooting control system issues · General skills/qualifications: MS Office 2010 (Excel, Word, Outlook) and general computer literacy · U.S. Citizen or Green Card Competencies: · Excellent written and oral communication skills. · Must be a self-starter, team player, work well with others and have a positive attitude. · Must be a creative thinker, results oriented, focused, and attentive to detail and accuracy. · Must have ability to prioritize, multi-task and meet deadlines. · Sharp, quick, dedicated, and innovative problem solver. · Core values and continuous self-improvement. · Must be organized, detail oriented, and able to think designs through completely. Company DescriptionMicro Instrument Corp was founded in 1944 by a family of German Immigrants who were tool makers by trade. The initial business model focused on developing small surgical instruments. Shortly after our establishment, a considerable opportunity became available to support local industrial giants such as Eastman Kodak, Bausch + Lomb, and GM/AC Delco. As the skills of our founders got recognized, it didn't take long for the complex machining contracts in town to be sent to Micro. We are very proud of our excellent machining legacy and capabilities, which still remains a staple of our company's success. By the late 1960s, manufacturing in the Rochester area was booming, which offered vast opportunities. Several major Micro clients strongly recommended that we get involved in the machine build business; some of which requested private meetings to detail their desperate need for reliable and efficient local machine builders. The leap into equipment design and build was taken in 1967, and has grown to be the heart of our company. From that point on, Micro Automated System's Group became a reality. Today, Micro continues to grow and ship equipment all over the world. Utilizing a state-of-the-art 55,000 square foot facility, we provide custom machinery and tools for multi-national clients including NASA, Covidien, Walt Disney, Xerox, and Valeant Pharmaceuticals. We employ a full staff of engineers, technical writers and trade professionals with unparalleled experience in the industry. Over half of our employees have over 20+ years tenure. With Micro's resources, engineers, facility, and dedication, we have the ability to design, build, and manage every manufacturing project to satisfy all of our client's requirements.Micro Instrument Corp was founded in 1944 by a family of German Immigrants who were tool makers by trade. The initial business model focused on developing small surgical instruments. Shortly after our establishment, a considerable opportunity became available to support local industrial giants such as Eastman Kodak, Bausch + Lomb, and GM/AC Delco. As the skills of our founders got recognized, it didn't take long for the complex machining contracts in town to be sent to Micro. We are very proud of our excellent machining legacy and capabilities, which still remains a staple of our company's success.\n\nBy the late 1960s, manufacturing in the Rochester area was booming, which offered vast opportunities. Several major Micro clients strongly recommended that we get involved in the machine build business; some of which requested private meetings to detail their desperate need for reliable and efficient local machine builders. The leap into equipment design and build was taken in 1967, and has grown to be the heart of our company. From that point on, Micro Automated System's Group became a reality.\n\nToday, Micro continues to grow and ship equipment all over the world. Utilizing a state-of-the-art 55,000 square foot facility, we provide custom machinery and tools for multi-national clients including NASA, Covidien, Walt Disney, Xerox, and Valeant Pharmaceuticals. We employ a full staff of engineers, technical writers and trade professionals with unparalleled experience in the industry. Over half of our employees have over 20+ years tenure.\n\nWith Micro's resources, engineers, facility, and dedication, we have the ability to design, build, and manage every manufacturing project to satisfy all of our client's requirements.

Job DescriptionSalary: $100,000-$150,000 The Opportunity: As a Lead Software Engineer, you will take ownership of implementing technical solutions for GNSS Simulation and related technologies. Your role will involve leading research and development efforts to implement new features, execute platform integrations, and ensure the validation and verification of system performance. You will collaborate closely with cross-functional teams to deliver robust, high-quality systems. This position reports to the Software Engineering Manager, based in our Rochester, NY office. Our Technology: Safran Federal Systems providesResilient Positioning, Navigation and Timing (R-PNT)solutions and custom engineering services to U.S. Government agencies, defense organizations and their contractors. Safran Federal Systems is authorized to work on the full spectrum of U.S. Government classified and unclassified projects, in addition to supporting strategic partnerships for key defense PNT technologies. How I will Contribute: • Develop software for high performance GNSS simulation systems., • Validate, test, and document new or existing codebases, • Communicate with sensors and other hardware systems, including low latency and precision time applications., • Optimize code for deployment on devices with constrained computing power and storage, • Write software to communicate with sensors and other hardware systems, including low latency and precision time applications, • Implement and improve GNSS targeting algorithms to our current and future products., • Provide on-site technical expertise during system deployments, troubleshooting, and performance optimization., • We value individuals who are proactive, structured, and analytical problem-solvers. You should enjoy working closely with a small team of specialists, where collaboration is key to our success. What You Bring to the role: • Minimum of 6 years of experience in a related role., • Bachelors Degree (B.S.) in Computer Engineering, aerospace engineering, software engineering, or related engineering degree from an accredited institution, • Experience with modern C/C++, Qt, Linux, networking protocols, and Python., • Knowledge of Git, Gitlab, or equivalent source control and CI/CD tools required, • Experience with software architectures, open architectures, and software design, • Experience with GNSS receivers, SDRs, and other navigation systems/sensors preferred, • Experience building latency sensitive systems with a strong understanding of low level aspects, • Experience working with digital hardware (usage of flashers, JTAG, oscilloscopes, etc.) preferred, • Speaking/ Presentation/ Dialogue Skills white board, small and large group presentations; high degree of comfort speaking senior military and staff personnel;ability to communicate effectively with both technical and non-technical individuals; intuitive ability to pivot from presentation to dialogue as appropriate., • Demonstrated strong customer focus, ownership, urgency, and drive, with the ability to adapt quickly to new technologies, • Self-motivated, and ability to self-prioritize effectively to achieve goals, comfortable with ambiguity., • Secret level security clearance required or able to be obtained within one year of hire, • US Citizenship required, • The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • The person in this position needs to have an ability and willingness to travel up to 10% of the time., • Must be able to remain in a stationary position 50% of the time. About Safran Federal Systems: Safran Federal Systems has been awarded as a Winner of the USA Today and Rochester Metro Area Top Workplaces 2025 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press releasehere. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description We are currently looking for a P & C Engineer with a minimum of 5 years of experience in protection and control system detailed design, cost estimating, and bid document preparation for commercial, industrial, generation, renewables, and utility power systems. Duties • Create/modify one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, and cable lists for substations, relay settings and configuration files., • Design auxiliary AC and DC power systems., • Create/modify technical specifications for major equipment, such power transformers, power circuit breakers, control house, panel construction specification and other high-voltage substation related materials;, • Coordinate with and provide technical assistance to SCADA engineers, substation physical engineers, and control design staff in order to fully develop system integration of protection, control, and monitoring systems;, • Perform basic calculations such as voltage drop, CT burden and saturation, lighting, and short circuit with minimal supervision;, • Apply field mark-ups of project as-built drawings with minimal supervision;, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • Provide leadership, guidance and instruction to less experienced staff members;, • Take personal responsibility for the quality and accuracy of one's work;, • Panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations)., • Comfortable evaluating/reviewing control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as relay setting coordination., • Aid in testing and commissioning as needed pertaining to system startups and functional checks. Requirements • A Bachelor’s Degree in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bid document preparation for medium voltage electrical power projects., • A PE license from a US State (NC and NY) is preferred., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Desired knowledge in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering Laboratories, General Electric and Basler equipment., • Periodic travel, ability to visit project sites., • Desired software knowledge in:, • ASPEN or similar, • Doble, • AutoCAD, • SKM, • ETAP Salary Range: $90,000 - $117,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Job Summary: The Coating Engineer provides engineering support for vacuum thin-film coating processes used in the manufacturing of optical components. This role working closely with other engineers and manufacturing staff. Essential Duties and Responsibilities: • Provide engineering support for PVD optical coating production, spanning development, production support, and process sustainment., • Work closely with design, and other manufacturing teams to transition coating solutions into stable and repeatable production processes., • Support Operations through guidance on substrate preparation, cleaning methods, coating materials, process parameters, tooling, and manufacturing improvements., • Assist shop-floor personnel with the setup, operation, and interpretation of optical thin-film measurement and characterization tools., • Investigate and resolve coating-related challenges in a production setting, including process evaluation, data analysis, and documentation of findings., • Present technical considerations, risks, and tradeoffs to leadership to aid project planning and operational decision-making., • Enhance coating designs and deposition processes with a focus on yield, performance consistency, scalability, and cost control., • Drive problem-solving and corrective action efforts for coating process issues using structured analysis methods., • Develop and deliver training to technicians on optical coating processes, equipment use, and standard operating practices., • Track process performance and lead initiatives aimed at continuous improvement and manufacturing efficiency., • Support the optimization and troubleshooting of optical coating equipment and associated processes., • Raises individual performance to a level that results in proactive responses to problem solving and continuous improvement., • Performs other related duties and assignments as required, depending on candidate skill set and on an as-needed basis to support evolving business needs. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate. Education, Skills and Experience: • Bachelor’s degree in optical, electrical, manufacturing or mechanical engineering. Experience will be considered in lieu of degree., • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Proficiency in coating design software and optical simulation tools., • Basic analytical skills, including basic statistical analysis., • Basic computer skills, including Microsoft Office and Windows operating systems., • Must possess experience related to troubleshooting and repairing optical coating chambers., • Availability outside of normal business hours to answer technical related questions., • Good oral and written communication skills., • Strong time management skills., • Work independently with minimal supervision.

Job DescriptionDescription: ABOUT US Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled many of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson Electric’s Electrical Engineer III is a position for engineers who are self-sufficient in design and engineering tasks. This position will lead the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting and leading project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer III role will mentor junior staff, manage project deliverables, and contribute to the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. WHAT YOU WILL DO • Electrical Systems Design:, • Lead the design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial, industrial, and utility projects., • Develop project design goals, specifications, and strategies to meet client requirements and project objectives., • Lead and participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Lead and perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with no supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports., • Develop relay programs., • Support service technicians with troubleshooting customer electrical system problems., • Project Leadership:, • Manage and coordinate electrical engineering aspects of projects, ensuring adherence to budgets, schedules, and quality standards., • Lead or participate in project team and client meetings to align project scope, progress, and deliverables., • Oversee the preparation of construction documents, including detailed drawings and specifications., • Mentorship and Supervision:, • Guide and mentor junior engineers and drafters in the execution of design tasks and production of drawings., • Conduct quality control reviews of engineering documents to ensure accuracy and compliance with project requirements., • Site Engagement:, • Lead or participate in site visits to verify existing conditions, monitor construction progress, and ensure compliance with design specifications., • Lead or participate in construction meetings and provide technical guidance to field teams and subcontractors., • Perform physical walk-throughs of sites as needed to assess conditions and resolve issues., • Process Improvement:, • Develop strategies to improve design quality, coordination, and efficiency in production efforts., • Incorporate renewable and sustainable design practices where applicable to enhance project outcomes., • Collaboration:, • Work closely with project managers, architects, and other engineering disciplines to ensure integrated and coordinated project delivery., • Communicate effectively with clients, contractors, and stakeholders to address technical and project-related concerns. ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering (Electrical Systems focus) from an ABET-accredited program required., • 7+ years of experience in electrical engineering, with a focus on commercial or industrial projects., • Professional Engineer (PE) license is preferred; Engineer-in-Training (EIT) certification required if not PE-licensed or additional 10 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM, Easypower,) is required., • Ability to design power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is required., • Ability to read and understand construction drawings and specifications., • Good understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Excellent leadership and mentorship skills to contribute to team efforts., • Strong communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills and train entry level engineers. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering (Electrical Systems focus) from an ABET-accredited program required., • 7+ years of experience in electrical engineering, with a focus on commercial or industrial projects., • Professional Engineer (PE) license is preferred; Engineer-in-Training (EIT) certification required if not PE-licensed or additional 10 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM, Easypower,) is required., • Ability to design power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is required., • Ability to read and understand construction drawings and specifications., • Good understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Excellent leadership and mentorship skills to contribute to team efforts., • Strong communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills and train entry level engineers.

Job DescriptionDescription: Bridge Project Engineer (PE) - Rochester, NY Civil / Structural, Bridge Design, Load Rating Lead Rochester-area bridge engineering in Fisher’s headquarters market, supporting Finger Lakes and Upstate New York transportation infrastructure, NYSDOT and municipal bridge work, structural analysis, load rating, inspections, foundation design, construction support, and civil/structural project delivery. Design bridges that connect communities while leading technical bridge tasks, coordinating with clients and agencies, supporting Project Managers, mentoring junior staff, and delivering accurate, constructible, standards-compliant transportation structures. What You’ll Do • Lead bridge design tasks, including load rating, structural analysis, foundation design, inspection support, transportation structures, and multidisciplinary civil/structural project coordination., • Develop design plans, specifications, cost estimates, reports, budgets, documentation, and technical deliverables aligned with scope, schedule, quality, and project requirements., • Support project planning meetings, client coordination, regulatory approvals, presentations, RFIs, construction-phase services, site visits, and technical issue resolution., • Review plans and bridge deliverables for quality, accuracy, constructability, code compliance, state and local standards, safety requirements, and client expectations., • Collaborate with Project Managers, engineers, inspectors, subconsultants, clients, DOTs, approving agencies, and junior staff while mentoring technical development and sharing best practices.Requirements: What We’re Looking For • B.S. degree in Civil Engineering or related field required; Master’s degree preferred., • 10+ years of transportation experience with a strong background in structures, bridge design, inspection, load rating, and civil/structural project delivery., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD, and PENNDOT bridge design software required; familiarity with NYSDOT or PennDOT design standards preferred., • Professional ownership, client service, critical thinking, problem-solving, sound judgment, organization, planning, attention to detail, collaboration, integrity, respect, active listening, and continuous-improvement mindset. Preferred Qualifications • Experience preparing bridge design plans, structural calculations, load ratings, inspection reports, cost estimates, specifications, and construction-support documentation., • Ability to coordinate technical tasks across bridge, roadway, civil, structural, survey, GIS, inspection, subconsultant, client, and agency teams., • Comfort mentoring junior staff, supporting technical development, documenting assumptions, and helping standardize quality review and constructability practices., • Strong communication skills with the ability to explain technical issues clearly to Project Managers, clients, agencies, field staff, and internal project teams. Why Join Fisher • Step into a technical bridge engineering role where your structural expertise is valued, your judgment matters, and your work directly strengthens public infrastructure., • Work on meaningful bridge, transportation, roadway, civil/structural, inspection, load rating, and community-shaping projects while building senior technical depth., • Join a collaborative, flexible culture built on mentorship, accessible leadership, ownership, professional development, continuous learning, work-life balance, and employee voice. Compensation + Benefits • Salary range: $95,000-$135,000; actual compensation varies based on experience, qualifications, education, location, and other factors and excludes the value of benefits., • Competitive benefits include medical, dental, vision, 401(k), company-paid life and disability insurance, PTO, paid holidays, and supplemental benefits., • Hybrid work schedule, professional development reimbursement, shareholders program, tuition assistance, strong work-life balance, and employee groups focused on community, inclusion, and employee voice. Location Flexibility This role is based in Rochester, NY. Fisher will also consider strong candidates located near Rochester, Buffalo, Syracuse, Albany, Binghamton, Ithaca, Canonsburg, or other established Fisher office locations, based on project needs and team alignment. Fisher Associates is committed to fostering a diverse and inclusive workplace and does not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionJob Summary Vanteon is seeking applicants for a Digital Signal Processing Engineer position. The candidate will be responsible for modem and waveform development, digital signal processing, analysis & simulation for wireless systems, and RF system design. This is not an entry-level role; it requires advanced education and experience in communications and signal processing. Only qualified applicants will be considered for this position. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Develop and implement algorithms for digital signal processing applications., • Design and optimize digital filters, signal transforms, and other signal processing techniques., • Analyze and interpret data to extract meaningful insights and develop actionable recommendations., • Collaborate with cross-functional teams to integrate signal processing solutions into hardware or software systems., • Conduct performance evaluation and optimization of signal processing algorithms on various platforms., • Participate in the design and development of real-time signal processing systems., • Troubleshoot and debug signal processing algorithms and systems to ensure optimal performance., • Document design specifications, implementation details, and testing procedures., • Provide technical guidance and support to other team members on signal processing-related issues., • Conduct research and feasibility studies to explore new signal processing techniques and applications., • Perform simulation and modeling of signal processing systems using specialized software tools., • Mentor junior-level engineering staff members.Required Specialized Skills/Knowledge, • Technical experience with:, • Digital communications and RF systems experience, including modem and link margin analysis, • Hardware and FPGA development experience (VHDL or Verilog), • Digital filter techniques, Fourier Analysis, and tracking loops, • RF circuit design (cascades, mixing, amplifiers, filtering, oscillators, etc.), • Nonlinear circuits, measurements, and simulation techniques, • Experience with relevant software tools, including:, • MATLAB/Simulink, plus DSP Systems Toolbox (required), • MathWorks HDL Coder, • Mentor Graphics ModelSim, • LabVIEW, • TI Code Composer Studio, • Xilinx Vivado and Intel Quartus Prime, • Experience using signal generators, network analyzers, spectrum analyzers, and logic analyzers, • Knowledge of common wireless standards and techniques, • Technical project leadership skills, • Strong verbal and written communication skillsEducation and Experience, • Ideal candidates will have a Ph.D. (or be in candidacy) in Communications and Signal Processing, • MS. in Digital Signal Processing (minimum requirement), • 5+ years of experience in digital signal processing design (or related academic research)Other Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling is available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Minimal travel may be required for client visits and tradeshows., • Please note that all offers for hire are contingent on passing e-verification and background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching., • Must be able to lift up to 15 pounds at times. The physical demands described above represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Compensation Range Although a candidate's specific compensation will depend highly on their specific skills and experience, the anticipated compensation range for this position is $125,000 to $165,000, plus a competitive benefits package. The position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. Relocation assistance of up to $15,000 may be available for well-qualified candidates. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job DescriptionAbout us:Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security, and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. Role Overview:Aeva is seeking to hire a talented and motivated Sr/Staff Hardware Engineer to join our EE HW team. The EE HW team owns the design, build and bring up of Aeva’s mixed-signal PCBs. As a Hardware Engineer, you may be responsible to develop a System Architecture of our LiDAR system based on product requirements. You will be working closely with all EE engineers to define the individual PCBs, their function, and interconnections.What you’ll be doing: • Break down product requirements into an architecture and EE PCB designs and their interconnections, • Work closely with Electrical Engineers as well as cross-functional engineering and product teams to review their designs in terms of function and layout placement, • Optimize architecture to reduce HW and SW complexity as well as optimize for cost and power consumption, • Direct ownership of PCBs and sub-systems of a LiDAR from schematic design through layout, fabrication and bringupWhat you have:, • BS, Masters or PH.D. degree in Electrical Engineering or related field, • 6+ years experience in HW design from architecture to implementation, prototyping and bringup all the way to high volume production, • Deep understanding of HW components, their interfaces and SW controls, • Good understanding of high speed designs with a variety of communication protocols (I2C, SPI, UART, Ethernet, PCIE etc), • Demonstrated experience and technical leadership in data acquisition subsystems including high-speed ADCs, high-precision analog sense paths and high-speed serial interfaces, • Demonstrated experience utilizing commercial SI/PI software tools, • Released several complex, multi-layer PCB designs into high volume production, • Be an active team member working closely with other EE engineers and other groups, • Ability to technically lead a small team of HW engineers is a plus, • Experience in motion control systems, design and theory is a plus, • A big plus if you have experience in LiDAR design or automotive product developmentThe salary range for Mountainview, CA will be $154,900 - $209,600 per year. Salary pay ranges are determined by role, level, and location. Within the range, the successful candidate’s starting base pay will be determined based on factors including job-related skills, experience, certifications, qualifications, relevant education or training, and market conditions. These ranges are subject to change in the future. Depending on the position offered, equity, bonus, and other forms of compensation may be provided as part of a total compensation package, in addition to comprehensive medical, dental, and vision coverage, pre-tax commuter and health care/dependent care accounts, 401k plan, life and disability benefits, flexible time off, paid parental leave, and 11 paid holidays annually.

Job DescriptionEncorus Group has recently opened our newest office in Rochester, NY, and we’re seeking a Senior Electrical Engineer to lead its continued development. This role goes beyond technical expertise—it’s a unique leadership opportunity to influence the growth, culture, and direction of a high-performing local team while collaborating closely with our established Buffalo office. We’re looking for an engineer with extensive experience in power infrastructure for industrial facilities, particularly in medium- and low-voltage systems. Our projects range from large-scale power generation facilities to control level distribution, offering a diverse and engaging workload. As a consulting firm, we support clients across a wide spectrum of industries and facility types—from state-of-the-art manufacturing spaces to older industrial plants—making this an ideal role for someone who thrives on variety and values client interaction. The ideal candidate is technically strong, proactive, and client-focused, with a passion for solving complex challenges, mentoring others, and contributing to a collaborative, fast-paced, and learning-driven environment. Responsibilities: • Define project requirements, delegate tasks to staff, and oversee projects through to completion, ensuring the accuracy and completeness of deliverables., • Serve as a project manager, handling correspondence, estimates, schedules, material lists, design considerations, and drawings., • Review and redline existing drawings, maintain project documentation, and coordinate project files., • Collaborate with internal teams and external professionals, including architects and engineers, to ensure seamless design integration., • Independently manage projects of moderate size and complexity while supporting senior engineers on larger, more intricate assignments., • Assist project managers with correspondence, estimates, schedules, material lists, design concepts, calculations, and documentation, ensuring compliance with customer, corporate, and industry standards., • Apply industry best practices and company standards to oversee the development of calculations, project drawings, and specifications., • Mentor and guide entry-level engineers, providing technical development, progress reviews, and coaching., • Coordinate with internal and external partners—including cross-discipline teams, construction teams, vendors, fabricators, and clients—to address electrical-related challenges., • Execute advanced engineering tasks that require creativity and critical thinking, solving unique electrical challenges that may have limited or no direct code guidance.Qualifications:, • Bachelor’s degree in electrical engineering, • 10+ years of electrical engineering and design experience, with a preference for consulting experience., • Professional Engineer (PE) registration., • Strong background in power infrastructure for industrial facilities, including experience with medium- and low-voltage systems, • Experience and enthusiasm for working across a broad range of project types and power distribution levels., • Proficiency using ETAP or SKM, Visual or similar analytical software., • Proficiency working with details and designing with AutoCAD and Revit drafters, • Strong communication and teamwork skills., • Ability to comply with company drug screening, including pre-employment tests., • A valid driver's license, along with the ability to travel locally and occasionally out of state.Pay Range: The salary range for this position is $100,000 - $125,000 annually. Actual compensation will be based on the candidate’s knowledge, skills, and experience. Encorus Group is an equal opportunity employer (EOE/AA Disability/Veteran), committed to fair and equitable compensation. Join Us! At Encorus, we value innovation, collaboration, and professional development. We offer a competitive benefits package, opportunities for career advancement, paid training, flexible scheduling, and hybrid work options depending on project needs and team collaboration. If you’re ready to take your career to the next level and make a significant impact in electrical engineering, we want to hear from you! Visit our careers page at https://encorus.com/about-us/careers/ to learn more and to apply. Powered by JazzHR jzcekULU65

Job DescriptionSalary: $80,000-$135,000 Senior Software Engineer - NAVWAR Rochester, NY The Opportunity: As a Senior Software Engineer, you will contribute to implementing technical solutions for Navigation Warfare and related technologies. Your role will involve research and development efforts to implement new features, execute platform integrations, and ensure the validation and verification of system performance. You will collaborate closely with cross-functional teams to deliver robust, high-quality systems. This position reports to the Software Engineering Manager, based in our Rochester, NY office. Our Technology: Safran Federal Systems providesResilient Positioning, Navigation and Timing (R-PNT)solutions and custom engineering services to U.S. Government agencies, defense organizations and their contractors. Safran Federal Systems is authorized to work on the full spectrum of U.S. Government classified and unclassified projects, in addition to supporting strategic partnerships for key defense PNT technologies. How I will Contribute: • Develop software for high performance navigation warfare systems., • Validate, test, and document new or existing codebases, • Communicate with sensors and other hardware systems, including low latency and precision time applications., • Optimize code for deployment on devices with constrained computing power and storage, • Provide on-site technical expertise during system deployments, troubleshooting, and performance optimization., • We value individuals who are proactive, structured, and analytical problem-solvers., • You should enjoy working closely with a small team of specialists, where collaboration is key to our success. What You Bring to the role: • Minimum of 4 years of experience in SW development or Aerospace engineering., • Bachelors Degree (B.S.) in Computer Engineering, Aerospace Engineering, Software Engineering, or related engineering degree from an accredited institution is required., • Experience with modern C/C++, Qt, Linux, networking protocols, and Python is required., • Knowledge of Git, Gitlab, or equivalent source control and CI/CD tools required., • Experience with software architecture, open architecture, and software design, • Experience with GNSS receivers, SDRs, and other navigation systems/sensors preferred., • Experience building latency-sensitive systems, with a strong understanding of low-level performance factors such as memory management, CPU cache behavior, concurrency, and network I/O optimization., • Experience working with digital hardware (usage of flashers, JTAG, oscilloscopes, etc.) preferred., • Speaking/ Presentation/ Dialogue Skills white board, small and large group presentations; high degree of comfort speaking senior military and staff personnel;ability to communicate effectively with both technical and non-technical individuals; intuitive ability to pivot from presentation to dialogue as appropriate., • Demonstrated strong customer focus, ownership, urgency, and drive, with the ability to adapt quickly to new technologies. Self-motivated, and ability to self-prioritize effectively to achieve goals, comfortable with ambiguity. • Secret level security clearance required or able to be obtained within one year of hire is preferred., • US Citizenship required, • The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • Must be able to remain in a stationary position 50% of the time. About Safran Federal Systems Safran Federal Systems has been awarded as aWinner of the USA Today and Rochester Metro Area Top Workplaces 2025 Award. In 2022, Safran acquired Orolia, now Safran Trusted 4D, the world leader in Resilient PNT. At the intersection of critical infrastructure and national defense, Safran Trusted 4D solutions govern and protect the integrity of systems that shape the world. In early 2019, Orolia Defense & Security spun off as a separate entity from its parent company Orolia, with the mission of providing resilient Positioning, Navigation and Timing (PNT) solutions and custom engineering services to U.S. Government agencies, U.S. Defense organizations, and their contractors. In August of 2019, Orolia Defense & Security acquired Talen-X, a U.S. company specializing in advanced GNSS (Global Navigation Satellite System) Simulation solutions and Interference, Detection, and Mitigation (IDM) technologies. Talen-X's portfolio was an ideal fit and has helped to enhance Safran FS's overall offerings. The acquisition enabled Talen-X's existing resources, operations, and capabilities to be scaled and accelerated to better support the warfighter. Read the press releasehere. Safran Federal Systems operates as a proxy-regulated company, Free of Foreign Ownership, Control, or Influence (FOCI). As such, Safran FS Defense & Security is approved to work on the full spectrum of U.S. Government classified and unclassified projects and is positioned to support strategic partnerships in the development of key PNT technologies for the defense market. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Please note this description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice

A career in transportation is more than bridges, roads, and rail. As we plan, design, and manage projects that move people and goods from Point A to Point B, we create connections that transform our communities. Every airport, road, bridge, port, or transit project is an opportunity to make communities safer, cleaner, and more resilient. Together, we're making an impact around the world. If you're looking for a career that moves, join our team of professionals who are passionate about the future of transportation. Your Opportunity Stantec's Rochester or Buffalo office is seeking a Transportation Project Manager with a minimum of 10 years of engineering design experience to lead the pursuit and delivery of infrastructure projects in New York State. We are looking for someone who is technically proficient, takes initiative, is a team player, and is looking for a challenge. Stantec offers opportunities for growth through marketing and business development, client exposure, and efficient delivery. Opportunity awaits to advance into further technical, practice, and/or operations leadership positions. You will have the opportunity to work on a variety of project types ranging from local to large design build projects across New York State and beyond. You will join an energetic team of engineers and planners who are passionate about Reconnecting Communities with a network of multimodal facilities. At Stantec, we "Design with Community in Mind" which means we focus on solutions that move all users regardless of age and ability -pedestrians, bicyclists, motorists, and transit riders-efficiently and safely, while improving the health, quality of life, and economic vitality in the communities where we live, work and play. You will also tap into Stantec's extensive network of subject matter experts across the world to increase your knowledge and provide the best solutions for your clients. This position requires strong technical and leadership skills to lead client meetings, perform financial and schedule management, coordinate tasks and personnel, and provide technical leadership and mentoring of staff. You will help shape and develop our talented local team and be an integral part of Stantec's continued growth. Your Key Responsibilities Project Delivery - Oversee and manage multiple projects serving as the Project Manager, Technical Lead, and/or Task Manager for transportation infrastructure projects. - Plan, organize, and manage the production of project deliverables to ensure projects are delivered on time, within budget, are technically sound, and meet quality standards. - Lead project coordination meetings with internal team members and/or external clients, consultants, and public agencies. - Serve as the project's point of contact with clients, agencies, and others to obtain and determine project requirements and approvals. - Conduct quality control review for managed projects and technical independent reviews for projects of peers. - Manage and monitor schedules and budget performance of assigned projects. Supervise and Mentor Developing Professionals - Provide supervision for direct reports. - Provide mentorship to staff to develop skills, strengthen technical abilities, and guide career development. - Review team's work and provide technical guidance on design approach and challenges. - Provide guidance to team members and other Stantec staff on technically complex projects and/or challenges where you have technical expertise. Support Business Development Activities - Develop positive relations with existing and prospective clients. - Develop proposal documentation including project scope, budgets, and design approach for projects of all sizes. - Coordinate scope and deliverables with internal disciplines and external subconsultants. - Coordinate and develop proposal graphics illustrating concepts and technical approach Qualifications Your Capabilities and Credentials - Strong understanding of all phases of project document production and the relationship between drawings and specifications. - Project coordination and management experience with the ability to lead one or more teams through all phases of project document production. - Experience preparing proposal documentation including scope and fee. - Working knowledge of the permit and approval process with the following clients preferred: NYSDOT, NYSTA, local municipalities in NY, NYSDEC, and USACE. - Experience with concept development, site planning, roadway design, grading and drainage, utility design, construction staging and Maintenance and Protection of Traffic. - Working knowledge of coordination with Municipal, State, and Environmental Agencies for project permits and approvals. - Excellent communication skills with the ability to explain complex topics and lead a team of designers. - Creativity, foresight, and mature engineering judgment in anticipating and solving problems. - Experience with alternative Project Delivery Methods such as Design-Build, Progressive-Design-Build and/or other methods. - Prior experience in design and modeling software such as Bentley OpenRoads Designer. Education and Experience - Bachelor of Science (B.S.) degree in Civil Engineering or equivalent. - Licensed Professional Engineer (New York State preferred or able to obtain within 6 months of start date) - Minimum of 10 Years of Engineering experience. Position will primarily work in an office or virtual environment; may require some field work. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Why Choose Stantec? - Career development resources to expand your skills, enhance your expertise, and grow your career. - Ability to work alongside others who share your passion to improve communities through exciting and unique projects. - Ability to join Stantec committees, employee resource groups, participate in community volunteering, and join various company or local groups/initiatives. - We put people first and want to help you make that appointment or the baseball game that you need to attend. At Stantec, we have a hybrid, flexible work schedule that meets both business and individual needs. - Stantec has more than 200 transportation professionals across New York State with a passion for our work. We are also residents who take advantage of the many treasures our communities have to offer and take pride in the improvements we help bring to fruition, including multiple award-winning transformational projects. Check out some of the highlighted projects on Stantec.com to see what you can be part of. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. Are you interested in this role but don't meet every single requirement? At Stantec we create opportunities by inviting, embracing, and celebrating differences. So even if your experience doesn't align perfectly with every qualification, we encourage you to apply anyways! You may just be the right candidate for this or other opportunities. Pay Range: - Locations in MN, VT, & Various CA, NY Areas - Min Salary $ 104,000.00 - Max Salary $ 156,000.00 Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | NY | Rochester Organization: 1928 Transpt-US Northeast-New York NY Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 20/08/2025 08:08:09 Req ID: 1001995 Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

A career in transportation is more than bridges, roads, and rail. As we plan, design, and manage projects that move people and goods from Point A to Point B, we create connections that transform our communities. Every airport, road, bridge, port, or transit project is an opportunity to make communities safer, cleaner, and more resilient. Together, we're making an impact around the world. If you're looking for a career that moves, join our team of professionals who are passionate about the future of transportation. Your Opportunity Stantec's Rochester or Buffalo office is seeking a Transportation Project Manager with a minimum of 10 years of engineering design experience to lead the pursuit and delivery of infrastructure projects in New York State. We are looking for someone who is technically proficient, takes initiative, is a team player, and is looking for a challenge. Stantec offers opportunities for growth through marketing and business development, client exposure, and efficient delivery. Opportunity awaits to advance into further technical, practice, and/or operations leadership positions. You will have the opportunity to work on a variety of project types ranging from local to large design build projects across New York State and beyond. You will join an energetic team of engineers and planners who are passionate about Reconnecting Communities with a network of multimodal facilities. At Stantec, we "Design with Community in Mind" which means we focus on solutions that move all users regardless of age and ability -pedestrians, bicyclists, motorists, and transit riders-efficiently and safely, while improving the health, quality of life, and economic vitality in the communities where we live, work and play. You will also tap into Stantec's extensive network of subject matter experts across the world to increase your knowledge and provide the best solutions for your clients. This position requires strong technical and leadership skills to lead client meetings, perform financial and schedule management, coordinate tasks and personnel, and provide technical leadership and mentoring of staff. You will help shape and develop our talented local team and be an integral part of Stantec's continued growth. Your Key Responsibilities Project Delivery Oversee and manage multiple projects serving as the Project Manager, Technical Lead, and/or Task Manager for transportation infrastructure projects. Plan, organize, and manage the production of project deliverables to ensure projects are delivered on time, within budget, are technically sound, and meet quality standards. Lead project coordination meetings with internal team members and/or external clients, consultants, and public agencies. Serve as the project's point of contact with clients, agencies, and others to obtain and determine project requirements and approvals. Conduct quality control review for managed projects and technical independent reviews for projects of peers. Manage and monitor schedules and budget performance of assigned projects. Supervise and Mentor Developing Professionals Provide supervision for direct reports. Provide mentorship to staff to develop skills, strengthen technical abilities, and guide career development. Review team's work and provide technical guidance on design approach and challenges. Provide guidance to team members and other Stantec staff on technically complex projects and/or challenges where you have technical expertise. Support Business Development Activities Develop positive relations with existing and prospective clients. Develop proposal documentation including project scope, budgets, and design approach for projects of all sizes. Coordinate scope and deliverables with internal disciplines and external subconsultants. Coordinate and develop proposal graphics illustrating concepts and technical approach Qualifications Your Capabilities and Credentials Strong understanding of all phases of project document production and the relationship between drawings and specifications. Project coordination and management experience with the ability to lead one or more teams through all phases of project document production. Experience preparing proposal documentation including scope and fee. Working knowledge of the permit and approval process with the following clients preferred: NYSDOT, NYSTA, local municipalities in NY, NYSDEC, and USACE. Experience with concept development, site planning, roadway design, grading and drainage, utility design, construction staging and Maintenance and Protection of Traffic. Working knowledge of coordination with Municipal, State, and Environmental Agencies for project permits and approvals. Excellent communication skills with the ability to explain complex topics and lead a team of designers. Creativity, foresight, and mature engineering judgment in anticipating and solving problems. Experience with alternative Project Delivery Methods such as Design-Build, Progressive-Design-Build and/or other methods. Prior experience in design and modeling software such as Bentley OpenRoads Designer. Education and Experience Bachelor of Science (B.S.) degree in Civil Engineering or equivalent. Licensed Professional Engineer (New York State preferred or able to obtain within 6 months of start date) Minimum of 10 Years of Engineering experience. Position will primarily work in an office or virtual environment; may require some field work. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Why Choose Stantec? Career development resources to expand your skills, enhance your expertise, and grow your career. Ability to work alongside others who share your passion to improve communities through exciting and unique projects. Ability to join Stantec committees, employee resource groups, participate in community volunteering, and join various company or local groups/initiatives. We put people first and want to help you make that appointment or the baseball game that you need to attend. At Stantec, we have a hybrid, flexible work schedule that meets both business and individual needs. Stantec has more than 200 transportation professionals across New York State with a passion for our work. We are also residents who take advantage of the many treasures our communities have to offer and take pride in the improvements we help bring to fruition, including multiple award-winning transformational projects. Check out some of the highlighted projects on Stantec.com to see what you can be part of. About Stantec Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what's previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what's possible. Are you interested in this role but don't meet every single requirement? At Stantec we create opportunities by inviting, embracing, and celebrating differences. So even if your experience doesn't align perfectly with every qualification, we encourage you to apply anyways! You may just be the right candidate for this or other opportunities. Pay Range: * Locations in MN, VT, & Various CA, NY Areas - Min Salary $ 104,000.00 - Max Salary $ 156,000.00 Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | NY | Rochester Organization: 1928 Transpt-US Northeast-New York NY Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 20/08/2025 08:08:09 Req ID: 1001995 Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

Define and enforce software engineering best practices, design patterns, and coding standards. Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. Familiarity with a scripting language (Python, Perl, Lua, Bash, etc.

Staff Software Engineer Remote Job Duties: • Implement and evolve a Data Lake storage system with low latency and high throughput for bulk data ingestion and query • Implement metadata, data governance, security, and acce

Write clean, efficient, and well-documented code, following best software engineering practices. Collaborate closely with cross-functional team members to deliver high-quality software solutions that meet evolving business requirements. Contribute to the full software development lifecycle, from con

Senior Backend Software Engineer – Startup – New York. Senior Backend Software Engineer. You should have 10+ years of professional backend software development experience who has a proven track record of delivering backend services end-to-end: designing APIs, building scalable systems, and deplo

Work with software engineering to troubleshoot custom software. Associate's Degree in Data Science, Engineering, Mathematics, or related technical field (minimum required). US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions.

We are hiring a junior Data Analyst/Engineer to support data management and transformation efforts in a manufacturing environment.

Computer Science, Electrical Engineering, Aerospace Engineering, or related disciplines with a minimum of 7 years of industry experience OR Master’s Degree in Computer Science, Electrical Engineering, Aerospace Engineering, or related disciplines with a minimum of 10 years of industry experience O

Bachelor's degree in science, mathematics, or engineering from a four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. Ability to use and learn statistical analysis software. Use of statistical software and technique

Computer Science, Electrical Engineering, Aerospace Engineering, or related disciplines with a minimum of 7 years of industry experience OR Master's Degree in Computer Science, Electrical Engineering, Aerospace Engineering, or related disciplines with a minimum of 10 years of industry experience OR

We have an opening for a talented Netflix Data Analyst to perform daily responsibilities with dedication.Stay adaptable in a dynamic, fast-paced environment.Work with your team to maintain efficiency and service quality.Perks include competitive pay, flexible schedules, hands-on training, a collabor

Document data engineering workflows, data models, and ensure alignment with data engineering best practices. The Data Engineer interfaces with Senior Data Engineers. The Data Engineer plays a critical role in ensuring the quality, reliability, and security of data systems hosted in on premise and cl

A leading AI firm in New York is seeking a Machine Learning Research Engineer to contribute to innovative AI solutions.

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related engineering or science field and a

A leading transport technology company is seeking a Data Engineer to join their team in Gothenburg.

Tyler Technologies is looking for a Senior Software Engineer to join their GIS team located in Latham, NY.

The Senior Software Engineer will develop, test, deliver, and support workflow-driven features that power client interactions on a platform. Collaborate closely with teammates, share knowledge, and contribute to engineering excellence. Collaborative mindset with a passion for engineering excellence.

Document data engineering workflows, data models, and ensure alignment with data engineering best practices. The Data Engineer interfaces with Senior Data Engineers. Additional experience using data engineering/reporting tools like (SSRS, SSAS, SSMS, SSIS, Tableau, Power BI, Informatica) preferred.

In this role, you will interact directly with trading, quantitative, compliance and risk, and IT functions to deliver new trading capabilities and services leveraging modern technologies and data & software architectures. Participate in all phases of software delivery lifecycle from analysis through

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions.

Someone who likes to work according to best practices and deliver high quality software craftsmanship.

By applying, you're joining our DevOps / Platform Engineer talent network. Stay connected: When projects need DevOps / Platform Engineering expertise, we match you to opportunities based on your expertise and project needs. About Mercor’s talent network** Join our DevOps / Platform Engineer Expert