Trabajos substation en Rochester, New YorkCrear alertas

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Field Construction Manager to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Attend pre-construction meeting., • Run weekly progress meetings., • Observe and document site construction activities., • Verify tailboards and JHA’s are adequate., • Notify the Construction Manager in the event of an incident., • Prepare daily construction reports, take 5 and weekly reports., • Use photos to document progress., • Record material deliveries and returns., • Attend any contractor led safety, environmental or progress meetings., • Be on site contact for RG&E Project Team., • Assist with on-site communication with the Construction Manager., • Monitor construction progress vs IFC’s, • Ensure field change markups are completed., • Observe and document installation and effectiveness of environmental control measures., • Monitor contractor QA/QC plan implementation., • Notify the Construction Manager of any environmental concerns., • Monitor construction progress vs project schedule., • Complete 2 sets of Red Line drawings throughout project with contractor., • Bachelor’s degree in Engineering, Construction Management, or equivalent education with 10 years relevant experience required., • A minimum of ten (10) years of progressive related electric utility industry experience, with transmission facilities construction management experience preferred., • Five (5) years' experience in a supervisory capacity preferred, • Knowledge of NRA clearances and switching orders would be beneficial, • Expert with Distribution Systems, • Applicants should have the knowledge, experience, and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA, and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Knowledge of GPS Systems & knowledge of SAP is preferred, • Candidates must hold a NICET Level II certification., • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written, and interpersonal communication skills Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection & Control Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionSenior Substation Engineer Senior Substation Engineer Rochester, Syracuse, Binghamton, or NYC Description We are seeking a Senior Substation Engineer to join our growing team. The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. The engineer will coordinate his/her design activities to maintain project schedules and ensure successful project completion. The engineer will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific duties include: • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes, • Preparation of project specifications for material and equipment purchase and installation., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Design of electrical substation facilities including site and bus work layouts, ground grids, conduit layout, lightning protection, control house design, lighting studies, and metering., • Review of internal and external designs for code compliance, good design practice and constructability., • Resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to substation design and construction, including all completion packages, as-built requirements and return data information., • Making and maintaining appropriate commitments to project teams and coordinating design activities with multi-disciplined project team members., • Maintaining good working relationships with internal groups that support projects., • Maintaining good working relationships with material suppliers, contractors, and any others that affect the quality, schedule and cost of projects., • Mentoring and providing guidance to developing engineers within the department., • Experience with Autodesk Inventor and Substation Design Suite (SDS) is a strong plus., • Experience with WinIGS and CYMCAP is preferred, • Strong client focus., • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionCanacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Right of Way Agent will be responsible for acquisition and enforcement of real property rights required for the operation, maintenance, and expansion of transmission, distribution, and communication systems, and other public and private infrastructure. The Right of Way Agent will provide local contact for interface with government, permitting, and customer interface related to franchise or property rights. DUTIES AND RESPONSIBILITIES: • Research, negotiate, acquire, defend, and ensure legal recording and enforcement of property rights required for electric, gas, or communication infrastructure for the client, • Document all project related activities, communication and correspondence with landowners including in-person meetings, email, phone, mail, etc., • Assist in preparing and securing specific state, highway, railroad, County, Town, City, Village permits for use of lands owned by governmental agencies, the public or other utilities including tree clearing permits., • Research, negotiate, and acquire leases, licenses, and permits for client infrastructure, staging areas for storm or construction lay down areas, railroads & canals crossing permits, • Coordinate and process payments to landowners for certain property rights, • Review legal descriptions, maps and other resources to ensure acquisition areas are correctly defined., • Review real estate market data and/or appraisals to present to landowners or to develop basis for proposed settlements; develop comparable market analyses for presentation to client as needed., • Prepare various documents necessary to document basis for settlements, construction conditions, close negotiations, damages, etc., • Serve as legal witness as necessary for condemnation or other proceedings, • Other activities related to obtaining or managing land rights to support substation relocations/rebuilds, transmission line rebuilds, and other utility scale projects, • Other tasks as assigned by project stakeholders., • Maintain project related files in organized manner, adhering to company work breakdown structures and file naming protocols.Perform other duties as required. QUALIFICATIONS: • Secondary degree or accreditation in related field is considered an asset., • 2-3 years of experience negotiating property rights documents including rights-of-way, easements, licenses, leases, purchase and sale agreements, • Experience drafting and negotiating property rights documents including rights-of-way, easements, licenses, leases, purchase and sale agreements, • Knowledge of Real Estate principles gained through education and experience, • Clear, concise written and oral communications, • Strong organizational skills including project files, diaries and other project data., • Strong negotiation and interpersonal skills, • Computer literacy (working knowledge of Microsoft Office software, Google Earth), • Ability to plot metes and bounds descriptions of property and read a variety of maps, electronic and paper, • Ability to evaluate, interpret, and analyze engineering and right-of-way drawings, • Ability to interpret and research (abstract) legal documents, • Skilled in property rights research methods, including courthouse searches for recorded documents and internet research of same, • Ability to research, develop and determine valuation of local real estate, crops, timber, etc. for compensation and/or damage settlements., • Ability to create and manage project forecasts associated with field agent tasks and professionally convey progress to internal and external stakeholders., • Must be willing to travel regularly (up to 80%), • Must have or have the ability to obtain a Notary Public LicenseAt Canacre, our benefits program is one of the ways in which we reinforce the value we place on employees and the role they play in helping us achieve our goals. Canacre offers comprehensive health and dental coverage, paid time off, and disability insurance. Other benefits include a 401(k) Savings Plan employer matching program, Employee Assistance Program, flexible work arrangement and a variety of wellness programs. Canacre is an equal opportunity employer, committed to a diverse workforce. Canacre complies with federal and state/provincial law governing non-discrimination in employment practices. Given the volume of applications we typically receive, we are unable to respond to all applicants, however, you will be contacted if your experience is a suitable match with one of our upcoming projects. At Canacre, we are committed to upholding the highest standards of employment practices in each jurisdiction we operate in. We ensure that all employees are fairly compensated for their work, in accordance with the provisions outlined by the Fair Labor Standards Act (FLSA) and the Canada Labour Code. Powered by JazzHR rGFQYBHaUt

Job Description Looking for a familia? As an award-winning, woman-owned, minority-owned boutique engineering firm, we’re on the lookout for spirited candidates to join our ever-growing familia. We’re proud to be recognized as a 2025 Best Place to Work in St. Louis, a reflection of our people-first culture and commitment to creating a workplace where everyone thrives. Our mission is simple: deliver world-class engineering services while fostering close-knit collaborations with our clients. If you’re passionate, diligent, and ready to make an impact, you’ll find your place with us at LUZCO. Let’s exceed expectations together and make engineering a space where everyone belongs. You're more than an employee. You're a familia member. As a member of the familia, we make sure this is more than just a job. • Benefits: Top-notch medical, dental, and vision insurance, plus a 401k match, paid time off, and a fun employee recognition platform to celebrate your wins., • Flexibility: We value a life-friendly culture. You’ll collaborate with your supervisor to set a routine that balances your needs and your team’s. PTO and Holidays are included, too., • Diversity: We thrive on diversity and the unique perspectives everyone brings. Our team is a melting pot of skills and experiences, which helps us approach challenges from all angles., • Growth: Your growth is our priority. Whether it’s tuition reimbursement for school or certifications, you’ll work closely with industry pros to map out and achieve your career goals., • Giving Back: We’re all about making a difference. Each year, we set aside paid time off for you to get involved in your community and give back., • Work Environment: Enjoy a relaxed vibe with weekly staff meetings (lunch included!), a fully stocked kitchen, a dog-friendly office, a relaxed dress code, and weekly happy hours! Sound like a familia you're ready to join? Here's the details on what we are looking for in this position: This is not a new business line. It is an extension of our proven model. For nearly a decade, LUZCO has delivered high-quality substation engineering services across the Midwest. We are now expanding our operations into the Northeast by establishing a dedicated presence in Rochester, NY to better serve clients in the region and allow our St. Louis office to remain focused on its core territory. You will lead this effort. In this role, you will initially support project delivery directly by designing, reviewing, and coordinating substation packages that include both Physical and Protection & Control scopes. As the local team grows, your focus will shift to leadership: building and mentoring engineers, ensuring quality, and developing strong relationships with regional clients. The ideal candidate is a technical leader with a builder’s mindset, capable of growing a high-performing team and representing LUZCO in the region. You will play a key role in developing relationships with Northeast clients, pursuing new opportunities, and maintaining a trusted feedback loop to ensure we consistently meet and exceed expectations. Roles & Responsibilities • Perform and review detailed substation designs, including both Physical and Protection & Control scopes, • Build, onboard, and mentor a Rochester-based team of engineers and designers, • Serve as the local technical lead and primary point of contact for Northeast substation clients, • Develop and maintain trusted client relationships, ensuring open communication and ongoing feedback, • Support business development by identifying and pursuing new opportunities in the region, • Deliver complete, accurate, and code-compliant substation packages, • Conduct field walkdowns and support site-related design tasks as needed, • Review drawings and calculations for technical accuracy and consistency, • Implement internal standards, tools, and processes refined through years of successful delivery Knowledge & Skills • Bachelor’s degree in Electrical Engineering or a closely related field, • Minimum 5 to 7 years of utility substation design experience, including both Physical and P&C disciplines, • PE license strongly preferred, • Experience with Avangrid or other Northeast utilities is a plus, • Proven leadership experience, including mentoring and team development, • Strong understanding of utility standards, NESC, NEC, IEEE, and related codes, • Excellent written and verbal communication skills, • Ability to work independently while collaborating effectively with internal and external teams Powered by JazzHR nBSzxZ1AZX

Job Description We are currently looking for a P & C Engineer with a minimum of 5 years of experience in protection and control system detailed design, cost estimating, and bid document preparation for commercial, industrial, generation, renewables, and utility power systems. Duties • Create/modify one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, and cable lists for substations, relay settings and configuration files., • Design auxiliary AC and DC power systems., • Create/modify technical specifications for major equipment, such power transformers, power circuit breakers, control house, panel construction specification and other high-voltage substation related materials;, • Coordinate with and provide technical assistance to SCADA engineers, substation physical engineers, and control design staff in order to fully develop system integration of protection, control, and monitoring systems;, • Perform basic calculations such as voltage drop, CT burden and saturation, lighting, and short circuit with minimal supervision;, • Apply field mark-ups of project as-built drawings with minimal supervision;, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • Provide leadership, guidance and instruction to less experienced staff members;, • Take personal responsibility for the quality and accuracy of one's work;, • Panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations)., • Comfortable evaluating/reviewing control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as relay setting coordination., • A Bachelor’s Degree in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bid document preparation for medium voltage electrical power projects., • A PE license from a US State (NC and NY) is preferred., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Desired knowledge in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering Laboratories, General Electric and Basler equipment., • Periodic travel, ability to visit project sites., • Desired software knowledge in:, • ASPEN or similar, • Doble, • AutoCAD, • SKM, • ETAP Salary Range: $90,000 - $117,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Protection & Controls Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 7 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Transmission Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Conductor Selection, • Structure recommendations, • Insulation, A/C interference, static wire, grounding studies, • Line Design: Plans and Profiles, Cross section details, • LiDAR and aerial photo data, • Utilization of wetlands, vernal pool and sensitive resource data in line and structure design and placement, • Detailed estimate and probability modeling, • Other studies as required to complete the projects, • Lead overall transmission line design for all capital projects, • Review/Design transmission line plan and profile drawings using PLSCAD to ensure compliance with Avangrid TM standards and NESC/other standards, • Drive the project plan for transmission line routing and strategy, specifically:, • Decide whether to rebuild existing lines or obtain additional right of way based on area congestion and local politics/permitting issues, • Determine required structure designs based on design constraints, • Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program., • 5+ years of electrical engineering experience within transmission lines, • Perform engineering responsibilities without assistance and minimal supervision, • Strong knowledge in standard engineering techniques and procedures Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Electrical Designer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • CAD work during the conceptual engineering phase of the project, • Provide support during the detailed engineering phase of the project by drafting key concepts needed to convey intent to the design engineer as needed, • Review a sample of all drawings supplied by detailed engineering firm to ensure compliance with Customer’s CAD standards, this includes items such as:, • Border and revision procedures and compliance, • Line and text style weights, fonts, heights,, • Overall drawing format issues, • Proper use of CAD layers in drawings, • 5 years or more of CAD experience, • Associates degree preferred or equivalent work experience, • Utilities background preferred, • Proficient with AutoCAD and MicroStation. Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description We are currently looking for a Protection and Control Engineer with a minimum of 5 years of experience in protection and control system design, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage levels range from 138 kV to 2.4kV. This position can be filled in any of our New York offices. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Design projects working directly with clients to develop project scope, identify problems, and propose solutions., • Typical requirements include Protection and Control drawings and documentations (relay one-lines, three-lines, AC/DC schematics, I/O lists, and relay settings, configuration files and etc), panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations), and other supporting documentation., • Comfortable evaluating the interoperability, control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as perform power system load flow studies, fault studies, relay setting coordination., • Aid in commissioning as needed pertaining to system startups and functional checks. Salary Range: $90,000 - $135,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • A BS in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bidding document preparation for electrical transmission and distribution substations projects., • A PE license from a US State is desired but not required., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards are used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Interest in low voltage coordination and arc flash studies. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently looking for a Substation Physical Engineer from 0 to 5 years of experience. Duties • Assist with create/modify detailed design for Substation:, • Control building (relay panels, facilities, cable raceways, trays, etc.), • Busbar and strain bus, • Equipment & support structures, • Assembly drawings, • Cables and connectors, • Lightning protection and lighting, • Grounding grid, • Conduit and tranches, • Perform basic calculations such as:, • Grounding, • Lighting and lightning, • Cable ampacity, • Tray sizing, • Trench sizing, • Conduit sizing, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • A Bachelor’s Degree in Electrical Engineering, Mechanical or Civil is preferred., • 0 to 5 years of experience in Substation Physical design., • Willing to pursue PE license in NY and NC., • Desired knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Periodic travel, ability to visit project sites. Salary Range: $60,000 - $86,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Project Scheduler & Cost Controller to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • The Scheduler and Cost Controller is required to produce a variety of regular and ad-hoc reports in support of our project planning and control initiatives. Working closely with all functional departments, the Cost Controller plays a key role in ensuring that policies, procedures, and standards are adhered to., • Verifying the accuracy of all cost information – including confirmation that costs have been properly coded and allocated to the project budget. Producing required accounting and project cost reports. Producing reports on deviations, under-runs and over-runs. Preparing forecasts and cost trend reports. Reviewing and evaluating trends and their impact on project costs. Monitoring project costs and commitment to budget and forecast. Maintaining change control and the change order Assessing progress measurement and developing/updating progress curves for progress reporting. Responsible for EVM during all project stages., • Develop an Integrated Master Schedule of the project according to Customer standards and approved scheduling tool., • Develop and evaluate the activities in the Integrated Project Schedule that affect the project and be able to capture work that can be completed in six (6) month Look-Ahead increments including work on critical path, work with less than 2 weeks float, work that can be consolidated, and work required to support that which is compatible with other projects., • Develop Project Sequence/Logic – preparation of project schedules that accurately identify the interrelationship of activities to be performed by the various disciplines and Third-Party involvement in the project., • Perform Current Schedule and Cost (EV, AC) vs. Performance Measurement Baseline, compare and highlight major activity deviations between the original baseline and the current plan based on monthly updates., • Perform Critical Path Analysis, identify and analyze critical paths/activities to ascertain project completion in time and in budget, including forecasting delays and evaluation of alternative scenarios., • Overall responsibility for providing guidance to other project personnel on good scheduling practices and techniques., • Customer Manager Planning and Control will coordinate Scheduler-Cost Controller Group to ensure the accomplishment of the Portfolio planning and control goals., • Scheduler-Cost Controller Group will work under Manager Planning and Control who will provide direction and oversight., • Produce a variety of regular and ad-hoc reports in support of our project planning and control initiatives., • Work closely with all functional departments, the Controller/Cost Analyst plays a key role in ensuring that policies, procedures, and standards are adhered to., • Responsible for developing, implementing, feeding, reconciling and maintaining valuable project control databases and reports for projects., • Manages and ensures the reconciliation of program controls data with financial and performance systems, coordinating with Project Managers., • Verifies the accuracy of all cost information including confirmation that costs have been properly coded and allocated to the project budget., • Producing required accounting and project cost, • Producing reports on deviations, under-runs and over-, • Preparing forecasts and cost trend, • Reviewing and evaluating trends and their impact on project, • Monitoring project costs and commitment to budget and, • Maintaining change control and the change order, • Assessing progress measurement and developing/updating progress curves for progress reporting., • Minimum 3 years of experience in Project Controlling and 4 years of experience in Construction Project Scheduling required, • Bachelor’s degree preferred, • CAPM or PMI-SP Certificate or equivalent (requires Avangrid approval), • SAP experience required, • Primavera (preferred) and/or MS Project experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance

Compensation & Benefits • Pay Range: $80,000 - $110,000, • Medical, dental, and vision programs with 60-80% company contribution., • Long Term and Short-Term Disability., • 401K with Company match., • Annual clothing allowance Summary The Field Construction Manager oversees on-site construction activities to ensure projects are completed safely, on time, within budget, and in accordance with design specifications and quality standards. This role coordinates all aspects of field operations, including subcontractors, materials, equipment, and labor, while serving as the primary point of contact between the construction site and project stakeholders. Responsibilities • Proactively resolve problems & help minimize change orders., • Weekly Report, Monthly Reports, site weekly minutes of meetings., • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting and update the onsite binder as needed., • Be organized and document all project progress to provide a good paper trail., • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting., • Be present at all times onsite when work is being performed., • Immediate notification to project manager of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate material deliveries., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Initiate transmission outage requests for project work., • Coordinate as necessary with all local and state municipalities., • Adhere to company policies, programs and procedures as well as Critical Infrastructure Protection (CIP), Federal Energy Regulatory Commission (FERC), North American Electric Reliability Corporation (NERC). Ensure all requirements are maintained throughout the project execution, • Availability to support emergency storm restoration efforts., • Excellent attention to detail and accuracy., • Effective communication and interpersonal abilities., • Ability to work independently and meet deadlines., • Directly related experience in Construction and Maintenance of Substation Facilities or Transmission / Distribution Systems is necessary:, • 4yr degree in a related field and 5+ yrs of field experience, or, • 2yr degree in a related field and 8+ yrs of field experience, or, • 10+ yrs of related experience in Construction and Maintenance of Electrical Transmission and Distribution Systems, or Substation Facilities, • General knowledge of electric line work and/or substation construction., • General knowledge of electric theory., • Previous experience holding switching and tagging procedures for projects requiring holding markup., • General knowledge of applicable environmental regulations governing construction: storm water pollution prevention, wetlands, stream crossing, and spill response for projects requiring environmental permit or compliance., • Basic knowledge of industry codes governing the electric industry including NEC, NESC, and OSHA., • First Aid/AED training a plus., • OSHA 10 / OSHA 30 training a plus., • Pass pre-employment drug & background screens., • Ability to travel; project locations may vary

Senior Substation Protection and Controls Engineer Rochester, Syracuse, Binghamton, or NYC MUST HAVE PE LICENSE Description We are seeking a Senior Substation Protection and Controls Engineer to join our growing Rochester, NY team. The Senior Substation Protection and Controls Engineer is required to work within a multi-discipline team to develop efficient and reliable Protection & Control systems. The incumbent will coordinate their design activities to maintain project schedules and ensure successful project completion. The incumbent will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific Duties Include • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes., • Develop and review technical specifications, drawings and standards of equipment/ projects., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Create a complete substation P&C design including One-Line, Three-line, AC/DC Schematics, and Wiring Diagrams., • Maintain complete project documentation with respect to engineering studies and calculations, all design packages, as-built requirements and return data information., • Maintain good working relationship with internal groups that support project such as other Engineering disciplines, Drafting, Procurement, Construction and Project Management etc., • Selection of equipment and material and preparation of specifications for material, equipment, construction and installation work., • Develop relay setting calculations and coordination reports., • Review of internal and external designs for code compliance, good design practice and constructability., • Coordinate design activities with other multi-discipline project team members., • Construction support including resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to relay settings and calculations, all design packages, as-built requirements and return data information. Maintaining good working relationship with internal groups that support projects such as other engineering disciplines, Drafting, Project Management etc., • Mentoring and providing guidance to developing engineers within the department., • Lead the development of design standards Required Skills • Experience with AutoCAD Electrical and Substation Design Suite (SDS) is a strong plus., • Experience on MathCAD, ASPEN or ETAP software is an asset., • Experience on relay setting and coordination is a must., • Experience in the design of wiring schematics is a must., • Experience in SEL and GE relay programming is desirable., • Experience on PSCAD or EMTP software is an asset., • Knowledge of modern power system, power system protection and relay technologies., • Strong client focus., • Knowledge of codes and standards. Experience/Education • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License, • A minimum of 7 years' experience in substation protection and control design. About Us We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: • Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : DO5-1854306 -- in the email subject line for your application to be considered.*** Danielle Olson - Executive Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Senior Substation Engineer Rochester, Syracuse, Binghamton, or NYC Description We are seeking a Senior Substation Engineer to join our growing team. The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. The engineer will coordinate his/her design activities to maintain project schedules and ensure successful project completion. The engineer will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific Duties Include • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes, • Preparation of project specifications for material and equipment purchase and installation., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Design of electrical substation facilities including site and bus work layouts, ground grids, conduit layout, lightning protection, control house design, lighting studies, and metering., • Review of internal and external designs for code compliance, good design practice and constructability., • Resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to substation design and construction, including all completion packages, as-built requirements and return data information., • Making and maintaining appropriate commitments to project teams and coordinating design activities with multi-disciplined project team members., • Maintaining good working relationships with internal groups that support projects., • Maintaining good working relationships with material suppliers, contractors, and any others that affect the quality, schedule and cost of projects., • Mentoring and providing guidance to developing engineers within the department., • Lead the development of design standards Required Skills • Experience with Autodesk Inventor and Substation Design Suite (SDS) is a strong plus., • Experience with WinIGS and CYMCAP is preferred, • Strong client focus., • Knowledge of codes and standards such as IEEE and ANSI Experience/Education • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License, • A minimum of 7 years' experience in substation design. About Us We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: • Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : DO5-1854297 -- in the email subject line for your application to be considered.*** Danielle Olson - Executive Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Review of internal and external designs for code compliance, good design practice and constructability. Knowledge of codes and standards. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.

Our Utility Sector team is growing! The Utility Project Manager supports electrical utility capital projects including substation upgrades, transmission line upgrades, hydro projects, Smart Grids, environmental compliance work, and gas projects.We are hiring multiple Project Managers to join our tea

Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements. The engineer will coordinate his/her design activities to maintain project schedules and ensure successful project completion. Th

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Expeditor- Materials Specialist to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Supports Project Manager, Construction Manager and Commission Manager sourcing materials, issuing purchase orders, tracking, expediting, managing materials and equipment manufacturing process and delivery to storage areas and project site., • Verification of Bill of Materials, • Supplier Identification, • Commodity Lead Time Analysis, • Order Acknowledgements, • Expediting delivery, • Materials Management, • Communication to Project Managers regarding material schedules., • Quality control, • Associate degree or Equivalent Experience, • Certificate in Production and Inventory Management (CPIM) preferred, • Five (5) years of experience in Materials Management, • Proficient in Microsoft Project, Excel and Word, • SAP Experience Preferred, • Experience in Utility Industry Preferred Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Project Manager to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Initiation, Planning, Executing, and Closing Projects — defining the project WBS, Cost Baseline and OBS structure, initiating the project, building its comprehensive work plan, controlling and managing to the risks, scope, schedule and budget, • Managing Teams — facilitating commitment and productivity, removing obstacles, and managing teams, • Implementation and Management of Quality and Environmental Process and procedures on all projects focusing on meeting SPI and CPI performance indicators less than 1.0, • Management of third-party projects including other transmission Customers and interconnecting customers, • Accountable and Responsible for:, • Cost /Budgeting and Management, • Communication Management, • Change Management, • Schedule Management, • Construction Management Oversight, • Commissioning Management Oversight, • Risk Management, • Regulatory and Stakeholder Management, • Responsible for the execution and successful completion of the project and the main point of contact between contractors and the client on all project matter., • Bachelor’s Degree is Required, • 5+ years in large scale projects/program management for utility business, • Professional Engineer License and/or Project Management Professional (PMP) Certification, • Proficient in Microsoft Project, Excel, PowerPoint, and, • Project Management Professional or Program Management Professional Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description We are currently seeking a Project Manager preferable with a strong focus and background in Substation Projects (Engineering services). The candidate will manage multi-disciplinary teams for the coordination and completion of projects on time and within budget. This role oversees all aspects of projects, including bid process, setting budgets, project staffing, monitoring, and project execution (internal and client meetings, billing, scheduled deliverables, client follow-up, and close-out). Duties • Consistently manage multiple projects., • Apply standard Project Management methodologies to execute projects in alignment with the Client's Management Systems (QMS, EMS, ISO, etc.), with a focus on risk management, quality deliverables, schedule adherence and regulatory compliance., • Plan and manage projects with complicated dependencies, multiple phases, duration of 6 to 24 months and/or moderate complexity or regulatory significance., • Lead and direct engineering team meetings providing status, facilitating change controls, and managing resources for projects., • Participate and oversee team member review and acceptance of client deliverables ensuring that deliverables meet quality and schedule expectations., • Experience in design and construction administration, utility design/engineering and direct management of construction projects in Transmission, Distribution, and Substations is desired., • Oversee the planning of work to ensure optimal integration and coordination of both internal and external resources to facilitate timely delivery of services., • Interface with various levels of client staff and management from the project team, contractors, engineers, government agencies, and Client representatives. Should be comfortable interfacing with all levels of management., • Train/Mentor less experienced staff., • Microsoft Office (Word, Excel, PowerPoint, Project), • Bachelor’s Degree in Business, Engineering, or related field, • An Associate’s Degree plus minimum 7 years directly related experience may be considered, • Project Management Professional (PMP) Certification from PMI or the ability to obtain within six months of hire, • Experience with Quality Management System standards, • Competencies:, • Process Driven, • Self-Motivated, • Attention to Detail, • Effective written communicator, • Effective verbal communicator, • Dynamic problem solving skills, • Skilled Delegator, • Team Contributor, • Team Motivation, • Skilled Negotiator, • 3-7 years of related Project Management experience on Engineering services is desired., • Work Environment:, • This job operates in a professional office environment, multicultural and an inclusive culture. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets (home office alternate option)., • Travel:, • May require periodic site visits, • Travel < 20% Salary Range: $90,000 - $113,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Senior Substation Protection and Controls Engineer. We are seeking a Senior Substation Protection and Controls Engineer to join our growing Rochester, NY team. The Senior Substation Protection and Controls Engineer is required to work within a multi-discipline team to develop efficient and reliable

The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. We are seeking a Senior Substation Engineer to join our growing team. Design of electrical substation facilities including site and bus work layouts, ground grid

Senior Substation Protection and Controls Engineer. We are seeking a Senior Substation Protection and Controls Engineer to join our growing Rochester, NY team. The Senior Substation Protection and Controls Engineer is required to work within a multi-discipline team to develop efficient and reliable

The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. We are seeking a Senior Substation Engineer to join our growing team. Design of electrical substation facilities including site and bus work layouts, ground grid

Senior Substation Protection and Controls Engineer. We are seeking a Senior Substation Protection and Controls Engineer to join our growing Rochester, NY team. The Senior Substation Protection and Controls Engineer is required to work within a multi-discipline team to develop efficient and reliable

The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. Maintaining complete project documentation with respect to substation design and construction, including all completion packages, as-built requirements and retur