Technical support engineer jobs in Garden City, New YorkCreate job alerts

Description Leidos is seeking an Electronics Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. This role is located in Jamaica NY area. Includes up to 25% travel. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) performing electronics design engineering, cost estimating, scheduling, coordinating, inspecting, and acceptance and reporting project progress and issues against project goals, scope of work, and schedule. The projects support air traffic control facilities over the geographic scope of the ESA. Electronics Engineer Primary Responsibilities * Plan and design a variety of facility establishment, replacement and modernization projects (e.g. data networking, air/ground communications, fiber optic data transmission, communications control, inter-facility wiring) * Perform on-site surveys to develop designs and detailed reports * Prepare unit installation and system integration design plans * Conduct and analyze studies of existing facilities * Utilize relevant software tools to assist in analysis and design * Generate sketches showing relation of proposed work in existing or new facilities with specifications and dimensions * Plan, schedule, and coordinate installation project activities to meet milestones and deadlines working directly with stakeholders and contractors * Confer with multi-disciplinary engineering staff and other personnel to identify and resolve problems with the design or implementation * Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans, risk management plans, lead and asbestos work permits) * Participate in on-site coordination meetings, inspections, cutovers, testing and restoration of facilities * Provide periodic updates of project to team, management, and stakeholders * Provide timely responses for requests for information and project related submittals * Provide monthly and semi-annual work status reports * Track and reconcile closure of project punchlist exceptions * Manage multiple projects towards successful on-time completion * Perform internal design reviews of other projects Electronics Engineer Basic Qualifications * Bachelor of Science degree in Electrical Engineering from a four year ABET accredited college or university and 4+ years of relevant experience in commercial, industrial or government facility establishment, replacement and modernization design engineering OR a Masters and 2+ years of relevant experience * Current and relevant knowledge of building and other codes in order to perform system power and data distribution design, grounding and surge protection, and address equipment location and physical installation * Ability to manage multiple projects, tasks and deadlines through to completion * Ability to conduct efficient, organized data gathering and data analysis * Ability to accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stakeholders, peers and management levels * Working knowledge of Microsoft Office products, engineering scheduling tools and applications, and be able to use the internet as an information gathering and communicating tool * Ability to effectively communicate verbally and in writing * Proficiency using AutoCAD / Microstation to create and edit engineering drawings * Ability to obtain a Public Trust Suitability. To be eligible for Public Trust you must be a US Citizen or a Green Card holder who has resided in the US for the past 3 years.) Electronics Engineer Preferred Qualifications * Proficiency in engineering analysis and design software tools If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. January 20, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

AWS Cloud Engineer The Transformation Group+ (a subsidiary of Medisys Health Network) is a healthcare Managed Service Organization (MSO) and professional services firm. We are a team of healthcare specialists, analysts, and developers with a shared mission: to support healthcare operations through smart, reliable, and purpose-driven technology. We understand the unique challenges hospitals, clinics, and health networks face, because we work alongside them. Our deep knowledge of healthcare operations allows us to build solutions that go beyond IT, helping providers deliver better care, improve outcomes, and work more efficiently. Work location Hybrid work schedule (3 days in office, 2 days remote) - first 90 days are on fully in office If located outside of the NYC/Long Island area, fully remote options are available. Travel may be required based upon client needs. Compensation The compensation for this role includes a salary range of $150,000-$190,000. For salaried positions, this role may also be eligible for an annual performance bonus. Additional benefits and perks may also be available, depending on the position and employment terms. This range and total compensation reflects consideration of several factors, including skills, experience, training, certifications, and organizational needs. Job Description We are seeking a Senior Cloud Solutions Architect with a strong focus on AWS and hybrid cloud environments to join our architecture team. This role is ideal for someone passionate about designing scalable, secure, and cost-optimized cloud architectures while setting cloud governance and standards across the enterprise. The successful candidate will have extensive experience working across business and technical teams to drive cloud transformation initiatives. Responsibilities: • Design and implement secure, scalable, and resilient AWS cloud architectures to support enterprise applications and platforms., • Define and maintain cloud architecture standards, frameworks, and governance policies., • Lead the design of multi-cloud and hybrid cloud solutions that integrate on-premises infrastructure with public cloud platforms., • Collaborate with engineering, DevOps, security, and network teams to ensure alignment of architecture with enterprise goals., • Document cloud architecture using Microsoft Visio and maintain up-to-date implementation and governance guides., • Drive adoption of Infrastructure-as-Code (IaC) practices, • Provide cloud expertise in areas such as cloud networking, security, DevOps, • Assist with cloud migrations, evaluating workloads for cloud suitability and developing migration roadmaps., • Ensure solutions comply with security and regulatory standards, such as CIS, NIST, ISO 27001, etc., • 6–10 years of experience with AWS cloud architecture, services, and security best practices., • 4–6 years of experience with hybrid on-premises/cloud integrations., • 4–6 years in Cloud Networking (VPC, Direct Connect, Transit Gateway, Load Balancers, etc.)., • 4–6 years in Cloud DevOps, including CI/CD pipelines and automation., • 2–3 years in Cloud Security, with hands-on knowledge of IAM, encryption, CloudTrail, WAF, etc., • 1–2 years of experience with Cloud FinOps practices and tools., • Proficiency in cloud architecture documentation using Microsoft Visio., • Deep understanding of AWS services including:, • Compute: EC2, Auto Scaling, Batch, • Storage: S3, EBS, Lifecycle Policies, • Serverless: Lambda, Fargate, • Containers: ECS, EKS, • Expertise in IaC tools: Terraform, CloudFormation, or Pulumi., • Experience with CI/CD tools: GitHub Actions, GitLab CI/CD, Jenkins, AWS CodePipeline., • Team player with strong collaboration skills and the ability to communicate complex concepts to business stakeholders., • AWS Certified Solutions Architect – Professional (Strongly Preferred)

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities SUMMARY The Field Engineer is responsible for providing high-quality service and evaluating customer’s requests in all customer technical spaces, including, but not limited to data centers, mobile telephone switch centers, central office wire centers, and designated enterprise spaces. The Field Engineer is required to take excellent care of our customers, build relationships, question things and take action, work hard, work smart, and enjoy the experience. ESSENTIAL DUTIES & RESPONSIBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Receives and analyzes input document from customer, paying close attention to critical dates and detailed information supplied., • Contacts customer to schedule site survey (if feasible) and gathers the necessary form and drawings for the walk through., • If feasible, conducts detailed Engineering site survey with the customer, or independently as needed., • Furnishes survey information for development of the bid or customer specific response forms., • Compile list of all required material types, quantities, cable lengths, etc to complete requested work., • Prepares/issues, as needed, detailed job spec, and drawings prior to the installation start date., • Creates a presence and maintains a continuing dialog with the customer in order to proactively plan/recommend future projects., • Recommends changes to standard material libraries to ensure that the appropriate supplies are being provided., • Assist in updating procedures as required to meet customer or equipment requirements., • Assists field installation groups in resolving technical issues., • Attends customer held meetings, as needed., • Performs other duties as requested by Manager, • Adhere to, promote, and accept personal responsibility for compliance to:, • Federal and Local Occupational Safety and Health Regulations, • Industry Consensus Standards, • KGP Injury and Illness Prevention Program Manual, • Participate in job site safety/hazard analysis when applicable Qualifications QUALIFICATION REQUIREMENTS • Exhibit personal power and leadership, • Exhibit self-awareness, • Exhibit a tendency for continuing education and self-improvement, • Exhibit enthusiasmand determination, • Exhibit industry awareness, • Exhibit intellectual curiosity, • Exhibit exceptional organizational skills, • Exhibit a strong problem-solving approach, • Exhibit strong verbal and written communication skills, • Exhibit the ability to define problems, collect data, establish facts, and draw valid conclusions, • High school diploma or equivalent, Technical degree preferred, • Possess 1 ½ years-experience or equivalent as determined by training program and demonstrated proficiency, • Demonstrate proficient use of Microsoft programs and applications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. • Work at heights, • Work at depths, such as under raised floors, underground vaults, etc…, • Bend or twist the body into unusual positions while working, • Coordinate body movements when using tools or equipment, • Maintain balance while performing construction tasks while on a ladder, • Reach with hands and arms, stoop, kneel, crouch or crawl, • Reach and stretch to position equipment and fixtures while maintaining balance, • Use hands and fingers to handle, feel, and/or manipulate small wires and objects, • Regularly walk and perform physical tasks all day without becoming overly tired, • Occasionally lift and/or move up to 49 pounds; participate in group lifts for 50+ pounds. Carry objects weighing up to 49 pounds for short distances., • Work shifts longer than eight hours in duration, • Push or pull heavy objects into position and apply muscular force quickly to objects and equipment, • Distinguish between colors, • Willing to travel extensively Pay Range in the United States: $26 - $39 based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance

Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: • None Duties and Responsibilities: • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills Education and Experience: • Bachelor's degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

We are looking for a Senior Manufacturing Engineer for our Westbury, NY facility. \n \n Your Responsibilities: \n • Support production activities to achieve shipment schedules through the development and design of methods, processes, specifications, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Assure most efficient, economic and productive plant layout, material flow and machine and labor utilization by planning the layout of factory machinery, the sequence of manufacturing operations and the specific procedures required for the fabrication, assembly and/or test of Component's Group products. Prepare and carry out plans to change part or material specifications, manufacturing methods, material or product routing, etc. and/or devise holding mechanisms and required tooling to facilitate product manufacture.\n, • Reduce the cost to manufacture products and increase current efficiencies through research of newer or advanced technologies and development of proposals for automation and/or the redesign of methods, tooling, machine attachments, etc. Also, efficient methodizing will reduce direct labor and, therefore, product cost. Prepare cost estimates involved in the changing from the present to new methods and estimate cost savings as the result of such changes. Recommend or determine the critical make or buy decisions on the basis of the Component's Group technical capabilities, equipment, labor and available capital.\n\n, • Assure production of quality parts, components and products by verifying machine, equipment and tool efficiency and performance. Investigate and initiate corrective action of problems or deficiencies\n\n, • Assure timely introduction of new products and/or methods by communicating and documenting required production operations through the preparation of operation sheets, manufacturing data base entries (ERP (Routings), (Setup sheet info.), (AutoDesk/AutoCad), visual aids and CNC programs if required. In addition, the Senior Manufacturing Engineer is expected to evaluate schedule milestones in early phases of design and prototype work, monitor costs, and assure quality and serviceability are considered during design and manufacture.\n, • Assist in the development and design of new products by providing advice on and determining the producibility of design concepts and the specification requirements that best utilize existing equipment, technologies and manufacturing techniques. In this capacity, the Manufacturing Engineer will inform design engineers of both manufacturing limitations and opportunities and will advise Manufacturing Engineering Management of new capabilities that competitive designs will require for the factory. Provide manufacturing input and provide a smooth transition into efficient production.\n\n, • Support production activities to achieve shipment schedules through the introduction of new technologies, the development and design of methods, tooling, jigs, fixtures and/or equipment modification in conformance with basic and sound engineering principles, policies and practices.\n\n, • Program CNC machines through CAD/CAM, Conversational or manual methods.\n, • Setup, prove-out, and optimize part manufacturing on CNC machines.\n\n, • Train other manufacturing personnel on programming and setup of CNC machines.\n \n Your Profile: \n\n • A Bachelor’s degree in Manufacturing Engineering or a related discipline or the equivalent in experience. \n, • Knowledge of CAD/CAM and a strong knowledge of CNC Programming are necessary. \n, • A full understanding of manufacturing process and the ability to fully apply the theories and concepts of manufacturing is essential.\n, • Typically, the degreed incumbent would require 4 - 5 years directly related experience to perform at this level. \n, • Ten years of varied machine shop, tool making.\n, • CNC programming and machining or other specialized manufacturing experience would be required for non-degreed employees to perform at this level.\n\n \n We offer: \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n The perks and benefits of working at Oerlikon include the following: \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • 100% company paid life insurance and disability insurance\n, • Employee Referral Bonus program because why not to bring your friends to work everyday!\n\n \n Why Oerlikon: \n Innovation and innovators thrive at Oerlikon, a leader in engineering solutions that enhance the performance of our products and services. We are diverse in our perspectives but united in our purpose: to develop technologies that reduce resource and energy consumption and help build a healthier, more sustainable and better protected world \n \n #joinoerlikonus #joinourteam \n \n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n \n For individuals assigned, hired to work or working remotely in/out of California, Colorado, Connecticut, Illinois, Nevada, Washington State, or New York, Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $110,000 to $130,000 per year. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. \n \n Agencies: \n Oerlikon only accepts agency resumes for positions that have been explicitly approved by HR for third-party support. We work exclusively with our approved vendors who have agreed to Oerlikon’s terms and conditions and have an executed contract in place. Any resumes or profiles submitted to Oerlikon employees for roles not approved and requested by HR will be considered unsolicited, and Oerlikon will not be obligated to pay a placement fee.

The Engineer for the Engineering and Resources group provides engineering & technical support for designing the electric distribution system. This position may require direct interaction with customers, contractors and consulting engineers which will include office and field work. Work with Lead Eng

Sales Engineer Pharma Tech Solutions. About the Role: We are seeking a Sales Engineer with a strong background in pharmaceutical software and GxP environments to support a growing team. Minimum 6 years of experience in pharmaceutical software sales, technical sales, or pharmaceutical tech consultin

The team consists of three product owners, one project manager, five scrum teams, one release train engineer, and two technical product owners. The responsibilities include operational support and product support for the B360 enterprise tool capabilities.

Job Description Summary: Parabit Systems, Inc., a leading innovator in security and self-service solutions, is seeking an experienced and highly skilled Firmware Engineer - Embedded Systems Designer to participate in all phases of firmware and embedded systems design, development, integration, and maintenance for our product lines. The ideal candidate will have deep expertise in embedded systems architecture, microcontroller programming, and hardware-software interoperability, with the ability to work collaboratively across engineering disciplines to deliver reliable, high-performance solutions. This role demands strong problem-solving skills, meticulous attention to detail, and a commitment to secure, scalable, and maintainable designs. You will be involved in the complete product lifecycle, from conceptual design and prototyping to release-to-manufacturing, field deployment, and product support. Candidates should possess excellent verbal and written communication skills, the ability to manage multiple projects simultaneously, and a strong focus on meeting deadlines without compromising quality. Primary Responsibilities: • Design, develop, and maintain firmware for access control, monitoring, and self-service equipment, ensuring seamless integration with enterprise-level management software and cloud-based platforms., • Contribute to system architecture, hardware interface design, and embedded application development., • Implement secure coding practices and ensure compliance with relevant cybersecurity and industry standards (e.g., NIST, FIPS, ISO)., • Develop and maintain communication protocols for embedded systems, including TCP/IP, UDP, SPI, I²C, UART, RS-232/485, USB, and Bluetooth., • Perform system-level testing, validation, and debugging using development tools, emulators, and simulation environments., • Create and maintain comprehensive technical documentation, including design specifications, test procedures, and release notes., • Enhance existing products with new features, security updates, and performance optimizations., • Collaborate with hardware engineers, software developers, QA engineers, and field teams to ensure product reliability and successful deployment., • Provide customer-facing technical support both remotely and on-site as needed., • Coordinate internal build activities, ensuring smooth workflow across engineering projects. Job Requirements: • Bachelor's degree in Computer Engineering, Electrical Engineering, or related field., • Minimum 10 years of experience in embedded systems design and development., • Proficiency with Microchip PIC family hardware, MPLAB IDE/IPE, and compilers; experience with other MCU platforms and RTOS environments is a plus., • Strong programming skills in C for embedded systems; experience with C#, VB, and .NET for tools and UI development preferred., • SQL database experience for configuration, logging, or device management integration is desirable., • Advanced understanding of network communication protocols (TCP/IP, UDP) and embedded communication standards (SPI, I²C, UART, RS-XXX, USB, Bluetooth, etc.)., • Expertise in state machine design and implementation., • Experience integrating embedded systems with cloud services, IoT frameworks, or remote management platforms preferred., • Demonstrated ability to document, test, and validate complex designs to ensure performance, security, and maintainability., • Strong multitasking capabilities with a proven record of delivering projects on time. Why Join Parabit: Parabit Systems is focused on growth, innovation, and developing leaders. We provide a collaborative and challenging environment where engineers work on advanced technology that impacts industries worldwide. As an equal opportunity employer, we value diversity and encourage all qualified individuals to apply. To Apply: Please email your resume to . All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

An established and leading Precision Timing & Frequency Technology Firm are looking for a System Engineer The System Engineer will support the design and development of RF-microwave synthesizer and synchronization hardware for military and space programs. Responsibilities: • Support the design and development of RF-microwave synthesizer and synchronization hardware for military and space programs., • Managing all technical aspects of design, development, and production of high reliability systems with emphasis on organizing system-level performance requirements allocation and decomposition activities., • Managing requirements verification and validation efforts through the entire product development and build lifecycle., • Must coordinate the design/development activities of a variety of separate engineering disciplines, including mechanical, electrical, thermal, radiation, component, and manufacturing., • Be able to coordinate test activities relating to product level qualification and acceptance testing. Education and Required Skills: • BSEE (Bachelor of Science in Electrical Engineering) with at least 5 years of experience is required, • Familiarity with EEE parts selection, screening, and nuclear radiation requirements such as NASA EEE-INST-002, is preferred. Comprehensive Benefits Package: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. They also offer paid time off including: Vacation, Sick and Paid Holidays

The Senior Engineer partners closely with Planning, MPLS Engineering, Field Operations, Product, and NMC teams to execute approved designs, maintain network health, standardize configurations, and support large-scale deployment initiatives. The Senior Optical Network Engineer is a senior technical r

Job Description The Project Engineer, with the assistance of the Project Team, coordinates all project activities to ensure cost, schedule, document control and quality standards are met. Under the direction of upper Management, the Project Engineer is expected to take on any/all tasks in the quest to learn the Electrical Construction Industry and the Company’s processes. Job Responsibilities: • Assisting with Design Work: Support more experienced engineers in designing electrical systems, components, etc. This may involve using software tools to create schematics, drawings, or models., • Documentation: Keeping accurate records and documentation is crucial in engineering. Entry-level engineers may be responsible for documenting their work, writing reports, and maintaining records of design specifications and test results., • Collaboration: Entry-level engineers often collaborate with other engineers, and project personnel from different disciplines to complete projects and solve problems., • Learning and Professional Development: Entry-level engineers spend time learning about the company's products, processes, and industry standards. They may also participate in training programs to enhance their technical skills and knowledge., • Fieldwork: Depending on the nature of the projects, entry-level engineers may have opportunities to visit job sites, participate in field installations, or assist in commissioning electrical systems., • Adhering to Codes and Standards: Entry-level engineers must familiarize themselves with relevant codes, standards, and regulations governing electrical design and installation to ensure that their work complies with legal and safety requirements., • Ability to work with a team., • Having organizational skills., • Ability to perform different tasks at the same time., • Having technical knowledge, • Ability to follow precise instructions., • Having IT skills with emphasis on Microsoft Office., • Being able to solve different types of problems., • Having good communication skills., • Being familiar with regulatory standards pertaining to the power industry., • Over 15 Years Owned and Operated, • Job training and mentorship, • Supportive Management Team, • Emphasis on professional development, employee satisfaction and work-life balance, • Competitive compensation packages, • Comprehensive benefits, • Paid holidays and vacation, • 401(k) match, • Medical Insurance, • Vision insurance, • Dental Insurance, • Union shopCompany DescriptionRMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.RMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.

Job Description We are Sourcepass, an IT consulting company (MSP) with a rich history of providing network support and innovative solutions since 2001. Our expertise spans IT services, cloud computing, and security, that tailor the right technologies to specific industries and business strategies. Sourcepass aims to be different. It is owned and operated by technology, security, and managed services experts who are passionate about delivering an IT experience that clients love. Sourcepass has acquired and continues to acquire companies across all avenues of technology bringing more than 40 years of expertise to all of our service areas. Today, Sourcepass comprises over six hundred employees serving more than two thousand clients across twenty unique vertical markets. And the best is yet to be. Our achievements speak for themselves: named to the Inc. 2022 Best in Business list, honored with two 2023 Stevie® Awards, listed on CRN’s 2023 Solution Provider 500, and recognized in Gartner’s 2024 Magic QuadrantTM. Most recently, we were awarded PAX8's 2024 Partner of the Year and designated as Microsoft CoPilot MVP. We take pride in these accolades and continue to push boundaries in the IT consulting industry. Join us and be part of our journey toward even greater accomplishments. POSITION SUMMARY As a Senior Infrastructure Engineer on the Project Team, you will spend your day implementing some of the latest technology. You will lead projects to implement new technologies across a wide variety of vendors and hardware and more. Projects include but not limited to: Installations (Firewalls, Switches, WAP's, Desktops, Servers, Hosts, SANS), Migrations (Servers, Backup appliances), Onboardings and Tools Deployments. The Project Team is responsible for implementing technical and productivity improvement solutions that revolutionize how entire organizations do business. This is not a ‘break / fix’ job (unless you break it.) Project Team members are the tip of the spear, touching all new technology first, getting the most experience with all facets of the IT lifecycle, and consequently growing their careers the fastest. The salary for this position is $100,000+ (negotiable based on experience). THIS IS A HYBRID ROLE WITH VISITS TO OUR CLIENTS SITES IN WEST/CENTRAL LONG ISLAND. RESPONSIBILITIES • Proven Experience as a Technical Support Analyst or relevant position, • Asses Complex environment Quickly to determine issues or potential issues, • Excellent attention to detail whilst staying focused on the big picture (a successful project), • Effectively and professionally communicate with all levels of an organization, • Motivated to work efficiently and resolve issues as they arise, • A desire to improve skillset by earning industry certifications (We pay), • Good communicator (from interdepartmental to client C level to end user), • Top Notch troubleshooting skills, • Great documentation, • Takes ownership of projects to completion, • 4+ years IT Experience, • 2+ years MSP experience, • 2+ years start to finish deployment of IT solutions, • Proficiency with all current Windows operating systems mandatory, Apple desirable, • In Depth Experience with:, • Meraki, • SonicWALL, • Cisco, • Fortinet, • VMWare, • HPE, • Dell EMC, • Advanced understanding of networking concepts, • Routing, • NAT/BGP/etc, • Switching, • VLAN's, • Certifications are desirable, • Microsoft, • Apple, • SonicWALL, • Cisco, • VMWare Sourcepass participates in the E-Verify program. As required by federal law, employees must complete an Employment Eligibility Verification (Form I-9) upon hire. Through the E-Verify program, Sourcepass will verify the identity and employment eligibility of all individuals hired to work in the United States. Sourcepass is also proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for everyone. All qualified applicants will receive consideration for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. We can’t wait to see what unique perspectives you’ll bring to our team! Company DescriptionSourcepass is a leading technology service provider and consulting company that focuses on providing expert managed services, cloud computing and cybersecurity solutions to small to medium sized business across the US. Check out our amazing rating on Glassdoor!Sourcepass is a leading technology service provider and consulting company that focuses on providing expert managed services, cloud computing and cybersecurity solutions to small to medium sized business across the US. Check out our amazing rating on Glassdoor!

Job DescriptionJob Description Hours: Full-Time 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Only candidates who are permanent in the Engineering Technician title, who are reachable on the Open-Competitive List (Exam #2040 or Exam #5068) may apply. Please include a copy of your Notice of Results, Proof of Filing, or indicate if you are permanent in the Project Manager title. If you do not meet the previously mentioned civil service criteria, you will not be considered for an interview. The Department of Design and Construction, Division of Infrastructure is currently seeking a CADD Designer to join our Construction Management Unit – Construction Support - AS-BUILTS Team. Under the guidance of an Engineer-in-Charge, the successful candidate will prepare as-built drawings and working drawings, utilizing specifications and final estimates for roadway, sewer, and water main projects. The selected candidate may require participating in field surveys; engage in engineering investigations and studies; attend meetings; and prepare calculations and reports. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions, or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ENGINEERING TECHNICIAN - 20113 Qualifications Qualification Requirements For Assignment Levels I – II 1. A four-year high school diploma or its educational equivalent approved by a state’s department of education or a recognized accrediting organization and two years of full-time satisfactory experience as an engineering technician; or, 2. An Associate degree from an accredited college or technical institution with a specialization in engineering technology; or, 3. A combination of education and experience which is equivalent to two years of satisfactory experience. To determine educational equivalency for experience, see “Special Note” below. Special Note One year of experience credit will be given for each 30 semester credits for college education leading to a degree from an accredited college in engineering technology. However, all candidates must have at least a high school diploma or its educational equivalent. License Requirement For Certain Positions For assignment to certain positions, the candidate must possess at the time of appointment or assignment a Motor Vehicle Driver License valid in the State of New York. This license must be maintained for the duration of employment. Additional Qualification Requirements For Assignment Levels III – IV To be eligible for placement in Assignment Levels III and IV, individuals must have, after meeting the requirements for Assignment Levels I and II, either 1. At least one year of satisfactory service as an Engineering Technician with the City of New York; or, 2. A Baccalaureate degree in engineering technology from an accredited college; or, 3. After meeting the minimum requirements described for Assignment Level I, at least two additional years of full-time satisfactory experience performing engineering technician work; or Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job DescriptionJob Description Hours: Full-Time Position – 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Only candidates who are permanent in the Administrative Project Manager title or those who are reachable on the agency’s Promotional List (Exam #8529), or the Open-Competitive List (Exam #8042) may apply. Please include a copy of your Notice of Results card or indicate if you are already permanent in the title. If you do not meet the previously mentioned civil service criteria, you will not be considered for an interview. The Department of Design and Construction, Division of Infrastructure is currently seeking a Deputy Director to join the Program Management / Programs – Pedestrian Ramps Program team. The successful candidate will supervise a team of Senior Project Administrators, Project Administrators, and Junior Project Administrators responsible for managing a portfolio of approximately $5.6 Billion of design and construction of Pedestrian Ramps projects throughout the five boroughs. The Deputy Director will monitor, track, and identify critical issues throughout the project scope development, pre-design, construction, and final design phases; and serve as liaison between the agency, NYC Department of Transportation (DOT), NYC Department of Environmental Protection (DEP), and other client agencies as it relates to project scopes, conflicts, troubleshooting, and resolving project related issues that arise. Lastly, the final candidate will utilize the Agency’s technical resources such as Benchmark to ensure that projects meet DDC’s Commitment Plan objectives; manage engineering consultants; maintain comprehensive project history e-files; coordinate project schedules; prepare project correspondence and reports; serve as the representative of the team in meetings with utility companies, and city, state, and federal agencies regarding pedestrian ramps issues; train staff in executing the team’ responsibilities; participate in the recruitment efforts of the agency; and support the Associate Commissioner, Assistant Commissioners, and Program Director with the team's objectives as required. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions, or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ADMINISTRATIVE PROJECT MANAGER - 8300B Qualifications 1. A baccalaureate degree from an accredited college in engineering, architecture, landscape architecture, business administration, or public administration, and five years of full-time satisfactory experience in the planning, administering or expediting of engineering design, and/or construction, or coordinating a very large engineering project, two years of which must have been in an administrative, managerial, executive or supervisory capacity; or, 2. A four year high school diploma or its educational equivalent and nine years of experience as described in "1" above; two years of which must have been in an administrative, managerial, executive or supervisory capacity; or, 3. Education and/or experience equivalent to "1" or "2" above. An accredited Master's degree in one of the disciplines described in "1" above, a law degree, or a valid New York State license as a Professional Engineer or Registered Architect or Landscape Architect may be substituted for one year of the required experience. However, all candidates must have the two years of the administrative, managerial, executive or supervisory experience as described in "1" above. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job DescriptionJob Description Hours: Full-Time – 35 Hours Work Location: Primary: 180 Maiden Lane, New York, NY 10038 and Other: 30-30 Thomson Ave, LIC, Queens 11101 Candidates who are permanent in the Administrative Construction Project Manager title or those who are reachable on the promotional exam#3523 or filed for open-competitive exam #3039 are strongly encouraged to apply. Please include a copy of your Notice of Results or indicate on your resume and cover letter if you are already permanent in the title. The NYC Department of Design and Construction, Division of Infrastructure is currently seeking a Deputy Director for the Coastal Resiliency – Construction Management – Section 1. The successful candidate will be responsible for an annual capital program comprised of multiple construction projects; manage professional and technical construction staff responsible for overseeing capital-funded sewer, water main, roadway, climate resiliency, public space improvement projects; review construction plans; coordinate with sponsor agencies, private utility firms and stakeholders to resolve any operational field problems involving construction; ensure contract compliance and payment of contractors; schedule and perform final inspections and participate in various agency taskforces such as those related to new initiatives in change orders, project record keeping, quality assurance, etc. Moreover, the Deputy Director will act as the representative of the unit in meetings with utility companies, and city, state, and federal agencies when needed; train staff in executing the unit's responsibilities; participate in the recruitment efforts of the agency; and support the Assistant Commissioner and Director with the team's objectives as required. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions, or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ADM CONSTRUCTION PRJ MGR-NM - 8299A Qualifications At least six years of full-time satisfactory experience in construction management work on capital projects, each one of which must have had a dollar value of at least $15,000, at least eighteen months of which must have been in a managerial or consultative capacity in an organization responsible for the management of construction; and a combination of the following, sufficient to equal a total of ten years of education and experience: a. Full-time satisfactory experience in construction inspection on capital projects, each one of which must have had a dollar value of at least $15,000. One year of acceptable experience will be credited for each year of construction inspection experience up to a maximum of four years. b. Full-time satisfactory experience in building construction as a journeyperson in one or more of the skilled building construction trades. One year of acceptable experience will be credited for each year of journeyperson experience up to a maximum of four years. c. Education in an accredited college leading to a bachelor's degree in architecture, landscape architecture, or air pollution control, chemical, civil including structural and bridge design, electrical, mechanical, or sanitary engineering will be credited on the basis of 30 credits for one year of acceptable experience up to a maximum of four years. A New York State license as a professional engineer or registered architect or a license as a professional engineer or registered architect from a state that has reciprocity with New York State may be substituted for the four years of education and experience described in "a", "b" and "c" above. However, all candidates must have at least six years of experience in construction management work described above, including at least eighteen months in a managerial or consultative capacity in an organization responsible for the management of construction. License Requirements Possession of a Motor Vehicle Driver License valid in the State of New York. Employees must maintain the license during their employment. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job DescriptionAccount Executive with Inside Sales Experience Sales professionals look no further! We are looking for an experienced, hands-on Account Executive who has sold software services to join our growing team. This is a great opportunity for driven sales professional to work with experienced sales leaders to learn new techniques, expand your capabilities, and dive deeper into SaaS technology. RESPONSIBILITIES INCLUDE: • Prospect lead from lists and set appointments, • Has used ZoomInfo for prospecting a plus, • Schedule corporate presentation, • Drive executive team level presentations, • Perform product demos using web tools to prospects and customers, • Assist in discovery, and create ERP solutions, • Work well with pre sales engineer team, • Effectively work with CRM and account management system, • Work closely with Support teams to ensure customer satisfaction, • Assist with marketing & social media efforts via customer success stories & testimonials MANDATORY SKILLS:, • Teamwork and good communication skills a must., • 3+ years sales experience selling SAAS services., • Four year university/college degree preferred or equivalent experience., • Ability to do on site visits to prospects and present in video conferences, • Ability to work with limited supervision.ADDITIONAL SKILLS (helpful but not mandatory):, • Previous apparel, retail, logistics or import business experience is a plus., • ERP software sales experience a plus, • Previous EDI experience is a plus. What's in it for you:, • Excellent compensation structure (base $50-60K) with additional commission of up to $30K!, • Training, and sales technique support, • Generous benefits, • Great work environment! ABOUT USOur company provides software and technical services (SaaS) to the retail, fashion and wholesale industries. We pride ourselves on building strong business relationships with our customers, helping them deepen their relationships with the major retail players (Amazon.com, Bed Bath & Beyond, Bloomingdales, JC Penney, Macy's, Neiman Marcus, Nordstrom, Saks Fifth Avenue, Sears, Stein Mart, Target, Walmart, etc.)

Job DescriptionJob Description Hours: Full-Time Position – 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 All interested candidates are welcome to apply and will be considered for an interview based on the Minimum Qualification Requirements. Please indicate on your cover letter if you are permanent in the Electrical Engineer title or if you are on the Open-Competitive List for Exam #4039. There may be current civil service list restrictions impacting the agency’s ability to hire. The NYC Department of Design & Construction, Division of Public Buildings, seeks a Design Reviewer (Electrical). The selected candidate will perform a comprehensive review of design and/or constructability documents from consultant engineering services and In-house design for DDC’s capital construction program. The Design Reviewer will be responsible for: project scoping, design and/or constructability review of consultant drawings and specifications (utilizing Blue-Beam), site inspections and reports, ad hoc technical investigations; condition surveys; in-house design (utilizing AutoCAD and BIM), lighting calculations and providing technical expertise and support services for client-agency projects. The candidate will interface with clients, consultants, contractors, and technical staff. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ELECTRICAL ENGINEER - 20315 Qualifications (1) Four (4) years of full-time, satisfactory experience in electrical engineering work; and (2) A valid New York State Professional Engineer’s License. Current New York State registration as a Professional Engineer must be maintained for the duration of your employment. A masters degree in electrical engineering from an accredited college or university, accredited by regional, national, professional or specialized agencies recognized as accrediting bodies by the U.S. Secretary of Education and by the Council for Higher Education Accreditation (CHEA) may be substituted for one year of the electrical engineering experience required in “1" above. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job DescriptionSenior Account Executive with Inside Sales Experience Sales professionals look no further! We are looking for an experienced, hands-on Account Executive who has sold software services to join our growing team. This is a great opportunity for driven sales professional to work with experienced sales leaders to learn new techniques, expand your capabilities, and dive deeper into SaaS technology. RESPONSIBILITIES INCLUDE: • Prospect lead from lists and set appointments, • Has used ZoomInfo for prospecting a plus, • Schedule corporate presentation, • Drive executive team level presentations, • Perform product demos using web tools to prospects and customers, • Assist in discovery, and create ERP solutions, • Work well with pre sales engineer team, • Effectively work with CRM and account management system, • Work closely with Support teams to ensure customer satisfaction, • Assist with marketing & social media efforts via customer success stories & testimonials MANDATORY SKILLS:, • Teamwork and good communication skills a must., • 3+ years sales experience selling SAAS services., • Four year university/college degree preferred or equivalent experience., • Ability to do on site visits to prospects and present in video conferences, • Ability to work with limited supervision.ADDITIONAL SKILLS (helpful but not mandatory):, • Previous apparel, retail, logistics or import business experience is a plus., • ERP software sales experience a plus, • Previous EDI experience is a plus. What's in it for you:, • Excellent compensation structure (base $60K) with additional commission of up to $30K!, • Training, and sales technique support, • Generous benefits, • Great work environment! ABOUT USOur company provides software and technical services (SaaS) to the retail, fashion and wholesale industries. We pride ourselves on building strong business relationships with our customers, helping them deepen their relationships with the major retail players (Amazon.com, Bed Bath & Beyond, Bloomingdales, JC Penney, Macy's, Neiman Marcus, Nordstron, Saks Fifth Avenue, Sears, Stein Mart, Target, Walmart, etc.)

Job DescriptionSalary: Job Title: Quality Control Engineer Location: New York Employment Type: Full-Time Why Should You Join AEIS? At AEIS, were proud to serve as the quality backbone on some of New York Citys most vital infrastructure projects. We dont just test materials we ensure public safety, durability, and long-term performance. As an Asphalt Inspector, youll be on the front lines of field testing and observation, supporting paving operations that shape NYCs transportation network. Youll be trained, equipped, and supported to grow in a technical and mission-driven career. Job Summary: We are seeking a proactive and detail-oriented Quality Control Engineer to join our team. This is an on-site role that involves coordinating with subcontractors, reviewing drawing sheets, identifying deficiencies, and ensuring that the project is completed by closing all deficiencies. Experience working with the Port Authority and at airports is must to execute the required project. Key Responsibilities: • Coordinate day-to-day quality control activities with subcontractors on the field., • Interpret and review project drawings and technical specifications to ensure adherence to quality standards., • Identify, document, and report any deficiencies or deviations from standards., • Conduct inspections and audits to verify compliance with client and regulatory requirements., • Maintain detailed and accurate records of quality checks, reports, and corrective actions., • Collaborate with project managers and engineers to resolve quality issues promptly., • Support continuous improvement initiatives and ensure quality protocols are followed. Required Qualifications & Skills: • Bachelors degree or diploma in Engineering, Construction Management, or a related field., • Minimum 23 years of hands-on experience in a quality control role, preferably within construction or infrastructure projects., • Familiarity with Port Authority project requirements is a must., • Strong understanding of construction drawings and site procedures., • Excellent communication and coordination skills., • Ability to work independently in a fast-paced, field-based environment. Preferred Qualifications: • Work alongside engineers, lab staff, and senior inspectors, closely controlling the deficiencies and using your skills to expedite project completion, • Access internal training pathways to broaden your certifications and credentials, • Competitive compensation, • Full-time opportunity with technical and career growth paths, • 401(k), • Health, Dental, Vision Insurance, • Paid Time Off (PTO), • Professional Development Support, • Employee Referral Program, • Internal mentorship and cross-training opportunities

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities We are looking for Senior Field Engineer to join our LTE/5G engineering team. The person will be the key contributor as a subject matter expert in radio frequency (RF) and/or wireless transmission design. Assist in the deployment, optimization and troubleshooting of these networks to resolve a wide range of issues in imaginative as well as practical ways. Use the expertise to work on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Interact across multifunctional groups and with customers driving the ownership of those relationships. ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned: • Support On-Site Field Work, technical work, installations, testing, and troubleshooting of backhaul, transmission methodology., • Install, Integrate and commission Samsung equipment to Samsung standards., • Install, Commission and integrate Cisco CSR/IXR routers to manufacturers and Samsung specifications., • Support troubleshooting of all T-1, ATM backbone, microwave backhaul transmission methodology, • Execute RMA process including field trouble-shooting, replacement and administrative completion. Process may require interfacing with customer, subcontractors and multiple groups within organization., • Report to Regional Field Ops Manager with daily status of activities., • Scheduling and assignment of daily tasks and site work to Field Technicians., • Customer Liaison for Network Operations including Samsung integration into customer processes and design procedures as well as handoff between organizations., • Conduct or assist in all field engineering activities in support of field trials (FIT/FOA/FFA)., • Design and execute RF field test plans for technology features and performance., • Accountable for driving field integration testing efforts (FFA/FIT/FFA) of all 4G/5G key features with customers, including test plan development, reviewing test plan with internal teams, driving cross-functional teams to execution, review of test results, issue identification, analysis and quality proofing., • Ability to manage field engineering walk/drive testing, post-processing, layer-3 signaling analysis, troubleshooting, parameter changes of LTE and 5G NSA and SA systems., • Perform ad-hoc field testing as needed., • Interface with customer and other teams via conference calls and/or in-person field activities., • Perform limited project management to ensure all RF Engineering deliverables are met., • Create or assist with the creation of CIQ., • Develop and review Engineering MOPs., • Able to create/follow/update tickets via Ticketing tools for work assignments, • Interface with software/hardware design groups and provide assistance for their activities of debugging and resolution., • Prepare reports and presentations, compile and analyze data and engineering information for the effective communication of processes, results, plans, recommendations, and conclusion., • Represent Market or Region Field Ops Team in periodic status meetings relative to overall project including daily, weekly and monthly progress by site, market or region., • Support subcontractors in growth of knowledge base for project fulfillment through field training efforts with the objective of expanding engineering expertise., • Review internal documentation for accuracy and provide updates/corrections as appropriate., • Provide direction to field engineers (internal and external) to meet overall project objectives. Goal is to ensure all field engineers are on track to meet project milestones and to redirect as necessary., • Other duties as assigned. SAFETY DUTIES & RESPONSIBILITIES Industry Consensus Standards Circet USA Injury and Illness Prevention Program Manual • Participate in job site safety/hazard analysis Qualifications • Bachelor's Degree in engineering with more than 10 years of directly related experience required, or 15 years of directly related experience with lesser degree., • Field or Network Engineering Experience in Wireless Network Design & Implementation including LTE- 4G/5G, IP, Router/Switching, Core Network Element Installation & Commissioning, Base Station Installation & Commissioning, RF Design and Performance., • Must have strong knowledge and experience with 4G and 5GDeployment, Test, Optimization and Troubleshooting for mmWave and Sub-6 GHz systems as well as their associated parameters., • Experience with UE data collection and post-processing tools, preferably Accuver XCAL and XCAP., • Experience in testing and trialing various 4G/5G features., • Experience with CBRS, Massive-MIMO, and TDD systems is strongly desired., • A solid understanding of RF fundamentals and data network protocols., • Advanced working knowledge of Base Station Vendor equipment (Samsung, Alcatel Lucent, Ericsson)., • Must be able to support presentation of technical information in various business settings to audiences of varying backgrounds., • Proficient in MS Office package., • Experience with GIS and mapping tools is a plus., • Samsung LTE/5G experience is a plus., • CBRS CPI Certification is a plus., • Excellent verbal and written communication skills in English to communicate key technical concepts and the ability to package complex ideas into logical, easy-to-follow progressions., • Successful track record defining direction and providing specific instruction for engineering projects/programs leveraging personal knowledge and organizational skills to increase team efficiency, facilitate personal development and mentor colleagues., • Must have a strong work ethic, excellent communication skills, integrity and work extremely well independently and in a team environment., • Proven ability to manage multiple priorities in a fast-paced environment., • Must have a valid US driver’s license., • Must be able to travel on short notice during the project more than 75% of the time. #ZR Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Job Description Job Title: Optical Engineer Remote with Business Travel Global Headquarters: Port Washington, New York WAC Group has disrupted our industry by challenging conventions and building sustainable products with integrity. With multiple thriving brands, our unparalleled, world-class organization includes WAC Lighting, WAC Home, Modern Forms Luminaires + Smart Fans, Schonbek, dweLED, WAC Landscape, AiSPiRE, VENTRIX, Colorscaping and WAC Limited brands. WAC Group makes significant investments in breakthrough technologies, electronics research and development, and advanced engineering. Through eco-friendly manufacturing and giving back to our local and global communities, we are overcoming challenges with creativity and innovation! Position Summary: The Optical Engineer will lead end-to-end optical system design, LED Selection and color science development for advanced LED lighting products across downlighting, projection, track, and linear platforms. This role combines deep expertise in photometric analysis, spectral modeling, LED package characterization, optical simulation, and standards compliance. The ideal candidate will be highly skilled in designing optical architectures for COB and discrete LED engines, optimizing beam performance, color quality, efficacy, and ensuring compliance with emerging Dark Sky, WELL standards and other sustainability standards. This position collaborates closely with product management, mechanical engineering, electrical engineering, and manufacturing teams to deliver world-class optical and color-rendering performance. Key Responsibilities: Optical Design & Engineering • Lead the design and development of complete optical systems for COB, discrete LED, and multi-source architectures., • Create optical solutions for downlights, projectors, wall washers, track heads, and linear systems using reflectors, TIR lenses, hybrid optics, mixing chambers, and light guides., • Perform optical simulations and ray-tracing (e.g., LightTools, TracePro, Zemax, SPEOS) to optimize beam quality, output, UGR, and efficiency., • Develop beam distributions including spot, narrow, medium, wide, oval, asymmetric, wall-wash, and custom profiles., • Evaluate and specify secondary optics from global suppliers; interpret intensity distribution, candela plots, IES files, and lens datasheets.LED Selection, Color Science & Photometry, • Conduct in-depth analysis of LED specification and color science including spectral power distribution (SPD), wavelength curves, CCT, CRI/TM-30, Duv, gamut, R9/Rf/Rg, and full binning structures., • Evaluate and compare LED packages from major suppliers (e.g., Cree, Nichia, Citizen, Lumileds, Samsung, Seoul, Luminus, Bridgelux)., • Interpret LED manufacturer data including LM-80, IS, TM-21/TM-28, TM-30, thermal derating, voltage/current curves, and optical efficiency., • Develop color mixing strategies for tunable white and RGB/RGBW systems including chromaticity stability, thermal droop compensation, and spectral optimization., • Optimize color mixing strategies with optical designs for various products., • Support calibration, tolerance analysis, and performance modeling for optical and chromatic uniformity.Standards Compliance & Sustainability, • Ensure optical and color performance meets or exceeds industry standards including:, • LM-80, LM-79, TM-21, TM-30, TM-20, • Zhaga, ANSI, IES, UL/ETL, cUL, CCC, TISI, etc., • WELL Building standards, Dark Sky / IDA compliance, Turtle Friendly applications (uplight control, CCT limits, spectral considerations), • Apply eco-design principles related to efficacy, energy use, material choices, and emerging sustainability requirements.Optical Prototyping, Testing & Validation, • Lead photometric validation, lab testing, and prototype evaluation to verify distribution, color consistency, and system efficacy., • Working with the test team in our China factory, interpret data from goniophotometers, integrating spheres, and spectrometers., • Support thermal-optical trade-off analysis and long-term lumen maintenance modeling.Cross-Functional Collaboration, • Working closely with multiple development teams, Global R&D (primary function), Functional R&D, Modern Forms R&D, Schonbek R&D, to support incoming projects, support and recommendations, evaluations and feedback etc., • Work closely with product managers to convert market/architectural needs into optical requirements., • Partner with mechanical engineers to integrate optics into housings, heatsinks, trims, and glare-control systems., • Provide technical guidance to NPI, quality, and manufacturing teams for LED selection, optics sourcing, and supplier qualification., • Support a multi-year global product roadmap aligned with commercial growth objectives., • Support high-quality product specifications, business cases, and PRDs (Product Requirement Documents)., • Support comprehensive competitive analysis, positioning frameworks, and training deliverables., • Regular performance analysis and competitive comparisons of WAC Products optics & fixture performance vs the market, • Develop new products that meet leading sustainability and material transparency standards, including RED List compliance, DECLARE certification, and WELL Building Standards., • Support and maintain a robust system to track material composition, supplier data, and documentation required for Environmental Product Declarations (EPDs)., • Integrate eco-design principles into the product development process to reduce environmental impact, improve material efficiency, and support circularity., • Support product documentation, transparency data, and sustainability attributes are readily available to meet growing specifier and regulatory requirements., • Drive adoption of sustainability-focused product features that increase market competitiveness and support environmentally driven project specifications. Requirements: Education • Bachelor’s degree in Engineering, Industrial Design, Architecture, Business, or related field required., • Master’s or PHD degree (Optical Engineering, Physics, Color Science, Photonics, or related field) is a plus.Technical Expertise, • 5–10+ years of optical engineering experience in the LED lighting industry., • Strong proficiency in optical simulation tools (Zemax, LightTools, TracePro, OpticStudio, etc.)., • Demonstrated experience designing optics for:, • COB LED systems, • Discrete LED arrays / boards, • Downlights, projectors, linear, wall wash, accent lighting, • Deep knowledge of LED color science, SPD analysis, binning, and photometric evaluation., • Strong understanding of optical materials, TIR lenses, reflectors, micro-optics, diffusers, and color-mixing chambers., • Able to read and interpret spectral graphs, candela plots, IES files, LED datasheets, and thermal-electrical curves.Industry & Standards Knowledge, • Familiarity with major LED suppliers and their product ecosystems., • Comprehensive knowledge of LM-80, LM-79, TM-21, TM-30, TM-20, ANSI C78.377, WELL, IDA/“Dark Sky,” and related industry protocols., • Experience with performance modeling of efficacy, CCT/CRI stability, and thermal behavior., • Experience in tunable white, human-centric lighting, UV/IR LEDs, or narrow-band LED design., • Familiarity with goniophotometer software, integrating sphere systems, and hands-on optical prototyping., • Knowledge of environmental product declarations (EPDs), eco-design standards, and green-building frameworks.Professional Skills, • Strong analytical, experimental, and problem-solving abilities., • Excellent communication and documentation skills; able to translate complex optical science for cross-functional teams., • Ability to manage multiple projects, meet deadlines, and support rapid development cycles., • Comfortable working with global teams and vendors.Travel Requirements, • If not located at NY Headquarters, business travel at least 6x per year to HQ for team meetings., • International travel 30–40%, primarily to our factories in China and Thailand., • Additional travel to global trade shows (Lightapalooza, LEDucation, Light & Building), industry conferences (IALD), customer sites, and Company Launch Events. We recognize people as our most valuable asset. Our competitive salary and benefits package includes: paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, please apply as directed. Given the high volume of responses, only qualified candidates will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all of its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities. Monday through Friday, 8am - 5pm Monday through Friday, 8am - 5pm

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that designs and delivers complete switchgear solutions. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Function: Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels, • Design and layout of electrical panels using AutoCAD, • Ensure that all panels are being designed and constructed to UL Standards, • Creating Bill of Materials for the sales engineer team, • Create testing procedures for specific projects to be used by shop personnel, • Determine parameters to program variable frequency drives and soft starters, • 3 years+ experience in the design of electrical systems required, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Some Minor Lifting and Moving of Parts and Equipment Salary commensurate with experience in the design of electrical systems (Range from $70,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Line Engineer (Maintenance Technician) Location: Brookville Hotel @ JFK NEW YORK CITY 154-71 Brookville Boulevard | Rosedale, NY 11422 SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing