Trabajos technical support engineer en Paterson, New JerseyCrear alertas

Job DescriptionQuality Control Microbiology Engineer(s) I, II, III Quality Control Microbiology Engineer I The “Quality Control (QC) Microbiology Engineer I” will support two local sites serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of QC Microbiology, responsibilities of the QC Microbiology Engineer I will include but are not limited to: Microbiological Testing: • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required, • Training in GxP/ GDP, Safety, • Minimum 0-2 years of experience or equivalent experience., • Microbiology testing or within the biopharmaceutical industry experience preferred., • Proficient with computer software; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels, • Must be able to work during the weekend, holidays and as required by the company, • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer II The Quality Control Microbiology Engineer II will support two local sites serving as a support role to clinical and commercial production. The QC Microbiology Engineer II will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer II will include but are not limited to: Microbiological Testing:, • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Writing/conducting investigations pertaining to microbiological testing, • Develop and train QC Microbiology Engineer I personnel on relevant business processesREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 2-4 years of experience with microbiological testing or within the biopharmaceutical industry., • Training in GxP/GDP, Safety, • Proficient with computer software such as; Microsoft Office, • MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical writing skills, • Technical training ability, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator., • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer III The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer III will include but are not limited to:, • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility; Direct reports, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Must have the ability to work in a team-oriented environment and with clients., • Must be able to work during the weekend, holidays and as required by the company

Job DescriptionQuality Control Microbiology Engineer III Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT and Human Resources disciplines in New Jersey. The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experienceMust be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesSupervisory Responsibility; Direct reportsWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels.Must have the ability to work in a team-oriented environment and with clients.Must be able to work during the weekend, holidays and as required by the company.Working EnvironmentWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy.Must have the ability to work in a team-oriented environment and with clientsMust be able to work during the weekend, holidays and as required by the companyMust be able to handle the standard/moderate noise of the manufacturing facility Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job Description About Us (Hybrid Position) At INTUVA, we are more than engineers — we are innovators, problem-solvers, and trusted partners for mission-critical projects that shape the future. From advanced data centers to high-performance infrastructure, our work powers HPC and AI environments worldwide. We deliver excellence by combining technical expertise with a collaborative, client-focused approach. As we expand, we are seeking a Director of Engineering to lead our multidisciplinary teams, elevate our technical standards, and drive transformative project outcomes. The Role As Director of Engineering, you will set the vision for our engineering operations, oversee the execution of complex projects, and ensure the highest levels of quality and innovation. You will lead a team of engineers and designers across multiple disciplines, partner with clients at a strategic level, and play a key role in shaping the future of our company’s technical and design capabilities. You will be responsible for: * Providing leadership and strategic direction for all engineering and design activities across mechanical, electrical, and related disciplines. * Overseeing the planning, coordination, and delivery of high-performance building systems for mission-critical facilities. * Ensuring all projects meet technical, budgetary, and scheduling goals while exceeding client expectations. * Driving innovation in sustainable design, energy efficiency, and emerging technology integration. * Developing, mentoring, and inspiring a high-performing team of engineers and designers. * Building and maintaining strong relationships with clients, partners, and key stakeholders. What Success Looks Like * Delivering technically superior, code-compliant designs that align with client objectives and industry best practices. * Building a culture of technical excellence, collaboration, and accountability within the engineering team. * Establish yourself as a trusted advisor to clients and a thought leader in the industry. * Driving efficiency and innovation in design processes, resulting in measurable project improvements. What You’ll Need to Be Successful Essential Skills and Experience: * Bachelor’s degree in Engineering (Any Discipline, Required). * Professional Engineer (PE) License (Required). * 12+ years of engineering design experience with at least 5 years in a leadership role. * Proven track record leading multidisciplinary teams in the delivery of large-scale, complex projects. * Deep knowledge of applicable codes, standards, and best practices (NEC, ASHRAE, IEEE, IMC, etc.). * Strong communication and negotiation skills — able to bridge technical expertise with executive-level discussions. * Experience managing project budgets, schedules, and client expectations. Preferred Qualifications: * Experience with mission-critical facilities, healthcare, or large industrial projects. * Advanced degree in Engineering or Management. * LEED accreditation or advanced knowledge of sustainable design strategies. Attributes We Value * Visionary Leader: You inspire teams to achieve excellence and think beyond the status quo. * Strategic Thinker: You make decisions that align technical capabilities with business goals. * Collaborative Influencer: You build trust across teams and with clients. * High Accountability: You take full ownership of results. * Innovator: You embrace new ideas, tools, and approaches to deliver better outcomes. What’s In It for You * The opportunity to shape the engineering direction of a growing, future-focused company. * A chance to lead complex, high-impact projects that define mission-critical environments. * A collaborative, energized culture where your voice and vision have a direct impact. * Ongoing professional development with support for certifications, leadership training, and conference participation. * Competitive compensation, performance-based bonuses, and a robust benefits package. * Flexible work arrangements and a strong emphasis on work-life balance. Company DescriptionPTS Data Center Solutions has been a leader in the data center and microgrid design/build construction industry for 20+ years. We are an adaptive, coaching, and supportive workplace focused on development, relationships, personal contribution, and opportunity.PTS Data Center Solutions has been a leader in the data center and microgrid design/build construction industry for 20+ years. We are an adaptive, coaching, and supportive workplace focused on development, relationships, personal contribution, and opportunity.

Job DescriptionOur firm is seeking an Environmental Engineer to join our Northern New Jersey office. The job will consist of a variety of tasks, but candidates can expect to perform soil and groundwater sampling, field inspections and design of solid waste facilities. Will also be providing modeling services, subcontractor oversight and project coordination. We require a self-motivated growth seeker who is effective at combining creative thinking with logical design ideas to develop solutions to challenging environmental problems. Requirements: • Bachelor’s degree in environmental engineering., • Trained in OSHA 40 Hour HAZWOPER preferred., • E.I.T. preferred., • Strong knowledge of Microsoft Office software (Word, Excel, Outlook)., • Experience with solid waste projects and knowledge of state and federal regulations is a plus., • Strong technical and problem-solving skills including attention to detail, accuracy, and completeness., • Possess an energetic and professional demeanor., • Interaction with clients and regulatory agencies., • Strong verbal and written communication skills., • Strong analytical and judgment capabilities., • Field work as required., • Ability and willingness to travel to various client sites., • Own vehicle with a valid driver's license.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $60,000 - $70,000 Powered by JazzHR KhZsZf4pLM

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for the successful outcome of the development and implementation of the complete part-specific process by effectively translating the customer’s requirements to the company and suppliers, and adhering to the Quality Management System, all applicable regulations, and Lean Manufacturing principles. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Manages all aspects of the part-specific process, including resource planning, project timelines, and establishing priorities to ensure customer requirements and quoted standards are met., • Evaluates and improves process documentation protocols for engineering and manufacturing, as well as creates, updates, and maintains the item masters, bills of material, and routers, etc., • Reviews requests for quotes (RFQs) and helps determine the feasibility of projects, estimates labor and related costs, and prepares formal quotes for submission to customers., • Teams with customers to review designs for manufacturability and to understand the functionality of the part and its features, adds specifications as needed, and verifies GD&T was properly applied., • Clarifies, confirms, and correlates acceptance criteria with customers, company, and suppliers., • Develops manufacturing methods for new and existing projects by reviewing customer specifications and quality agreements, adhering to all applicable requirements, and effectively translating them into instructions., • Performs initial sourcing and qualifies suppliers from a technical perspective, as well as effectively communicates the customer requirements through training and auditing of the supplier’s performance on a regular basis., • Ensures product quality through the development and implementation of complete quality plans including CMM programming, gage design and procurement, and inspection plans., • Coordinates and/or performs validation activities (IQ, OQ, PQ) designed to qualify the equipment and the process as required., • Teams with the CNC Engineer to design work-holding devices and tooling as needed to ensure the desired outcome., • Investigates root cause of customer and/or supplier rejections and internal quality failures, dispositions non-conforming parts, recommends and implements effective corrective action as required, and provides accurate and timely responses to customers., • Determines the impact of ECNs on bills of material, routing, and spares, and coordinates any change., • Leads the post-production review and evaluation of the part-specific process, including equipment performance and product quality, recommends improvements, and coordinates their implementation., • Provides direction and on-the-job training to engineering and production associates regarding manufacturing methods and practices, as well as recommends, develops, and implements complete training programs, including materials and assessments., • Champions lean manufacturing principles by encouraging lean thinking in all aspects of development and production, as well as conducting and/or coordinating training and implementation with managers and associates., • Understands and complies with company policies, safety guidelines, quality system procedures, and housekeeping standards.Additional Duties and Responsibilities:, • Program, troubleshoot, and manage the Universal Robots arms., • Oversee the fixture designs, programs, prove outs, operation, and maintenance of the automated blasters., • Identify opportunities for automation within the organization and develop solutions to enhance productivity., • Collaborate with various departments to implement automation projects., • Ensure all automated systems comply with safety and quality standards., • Provide training and support to staff on the use of automated equipment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor’s degree from a four-year college or Manufacturing Engineer Certification and 8-10 years related experience and/or training; or equivalent combination of education and experience. Required Skills, Knowledge, and Abilities: • Ability to read, write, and speak English. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or government regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and the general public., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Experience with computer applications, including word-processing, spreadsheets, graphs, databases, CAD, and presentations., • Experience with process capability, Gage R&R, and statistical techniques., • Experience in using basic and advanced measuring tools and equipment., • Applied knowledge of Geometric Dimensioning & Tolerancing (GD&T)., • Capable of working independently as well as collaborating and coordinating efforts with colleagues., • Ability to establish priorities and manage multiple activities and requirements in a changing, fast-paced environment., • Experience with manufacturing materials, manufacturing processes, and secondary processes., • Project management skills.Desired Skills, Knowledge, and Abilities:, • Advanced metrology (CMM programming, vision system, etc.)., • Lean/Six Sigma. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR gdadFPpwmr

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building Overview: We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success Here: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job DescriptionWho We Are: At Sectigo, we align around our mission and pride ourselves in helping thousands of customers sleep better at night. Sectigo is a leading provider of digital identity and cybersecurity solutions, offering a comprehensive suite of products to protect online transactions and communications. Our mission is to secure the digital landscape for enterprises worldwide. “When people think Online trust management, they think Sectigo because we offer our customers unparalleled peace of mind.” How we show up with each other and our customers every day is just as important, and we win as #OneSectigo by living out our core values - Support, Excellence, Collaboration, Teamwork, Integrity, Growth and Openness. We are committed to investing in our diverse teams where everyone understands their role and how they support our strategic goals, we drive operational excellence through scale and efficiency, and we strive to delight our customers and become the market leader in our industry. If you aspire to join a driven team that holds each other accountable to meeting our lofty goals and you’d like to be part of our growth story in delivering a market leading user experience, we’d like to talk to you. What We Are Looking For: Our Sales Engineers take ownership as being the technical prime to articulate the technical value and fit for our customers and prospects. We are looking for a Sales Engineer who possesses exceptional technical, presentation, and communications skills that takes our customers and prospects through the pre-sales stages, which encompasses a technical presentation of our product and service offerings, an assessment and understanding of our customers’ and prospects’ existing IT infrastructure to ensure optimal understanding of potential use cases, and an overall guidance through a proof of concept. At Sectigo, our Sales Engineers are the technical bridge and a liaison among various stakeholders, such as our sales team, channel partners, customers, prospects, etc. This is a full-time and remote position, ideally based in the BosWash region of the U.S. What You’ll Be Doing: • Assist mid-market and enterprise sales teams with customer management and customer expectations throughout the sales process., • Conduct technical presentations and demos for prospects, channel partners that is tailored to the audience whether they are engineers and/or executives., • Provide Proof of Concept service to customers/prospects, assist clients with planning and implementation of Sectigo solutions., • Provide training to new/existing channel partners along with responding to incoming technical inquiries., • Work in a fast-paced environment under minimal supervision., • Assist with sales proposals and RFPs/RFIs., • Contribute to building/improving the SE Readiness Program such as: Develop subject matter expertise in assigned products/solutions; share best practices with the team to enhance quality of service and efficiency; maintain and expand working knowledge of current and future products; and provide product training and mentoring when required., • Willing to travel regionally for customers facing activities, as well as marketing, user group events, and conferences., • Channel feature requests to Product Management to enhance Sectigo products., • Participate in alliance projects including building vendors’ and customers’ relationships., • Additional responsibilities and special projects as assigned., • Other duties as assigned and related to the nature of this role and company initiatives. Requirements: Education • Bachelor’s degree in computer science or engineering from an accredited college, or equivalent work experience is strongly recommended., • MCP – Microsoft Certified Professional (considered an asset)., • Linux/Solaris/UNIX System Administration (considered an asset)., • Minimum 5+ years of industry experience with a minimum of 1-2 within a pre-sales environment is required., • Current or prior Sales Engineering and/or professional services experience is strongly preferred., • Experience working with various Microsoft software and systems, specifically Active Directory, Windows platforms servers and clients., • Experience working with Linux platforms., • Experience with Public Key Infrastructure (PKI), SSL, X509 (considered an asset)., • Experience with webservers & firewall/load balancers software/platforms (considered an asset)., • Experience with Public Cloud (Azure, GCP, AWS) (considered an asset)., • Must be able to travel more than 35% of the time to the assigned regions and/or territories. Talents and Desired Qualifications:, • Demonstrated strong verbal and written communication skills, excellent customer service and account management, and ability to interface with a diverse set of clients including administrators and C-level executives., • Software as a Service (SaaS) technical solutions selling., • Solid multi-tasking, troubleshooting and problem resolution abilities., • Self-starter with a can-do/will-do attitude, quick leaner, willingness to work as part of a team, and a desire to continually learn new tools/technologies., • English language proficiency required., • Willingness to travel up to 50% of the time if required.

Job Description ELLKAY started out providing connectivity solutions to laboratories and within a few years, grew to also provide data management solutions to ambulatory organizations. ELLKAY is now a trusted data management partner in five healthcare segments. ELLKAY’s solutions continue to serve laboratories and ambulatory practices and have expanded to empower hospitals and health systems, healthcare IT vendors, ambulatory practices, health plans, and other healthcare organizations with cutting-edge technologies and solutions that drive their growth and interoperability strategies. Today, ELLKAY remains true to our core values, building strong partner relationships and offering unparalleled service and support while providing innovative, scalable solutions to the challenges our customers face in today’s data-rich world. ELLKAY's experience, customer-focused approach, and reputation for innovation, speed, and accuracy differentiate ELLKAY as a premier partner for your interoperability needs and data management strategy. Job Description: ELLKAY is seeking a Senior Software Engineer to play a crucial role in advancing our core healthcare IT systems through the development of scalable and secure software solutions. As a senior individual contributor, this position involves working closely with other engineering team leaders to architect robust backend systems, guide technical direction, and enhance software delivery processes. Essential Duties & Responsibilities: * Take a technical leadership role in building and scaling national-scale healthcare data exchange systems * Deliver extremely reliable, scalable, and observable software capable of supporting massive transaction volumes * Lead architecture and implementation of highly scalable, API-driven systems powering healthcare data exchange at scale * Provide practical, balanced technical guidance—considering both engineering best practices and business priorities * Guide design decisions on fault tolerance, throughput optimization, and system resilience * Contribute to CI/CD pipeline improvements to maintain quality while accelerating delivery * Collaborate with product and implementation teams to shape technical execution * Document technical designs, workflows, and release notes for cross-team and customer consumption * Participate in and lead design and code reviews * Mentor engineers through pairing, design discussions, and pull request feedback Qualifications: * 10+ years of software engineering experience, with a focus on building large-scale, high-throughput distributed systems * Have a balanced, pragmatic approach—able to apply the right level of engineering rigor to meet business needs * Experience designing and scaling API-driven systems with extreme reliability and throughput requirements * Experience with event-driven, queue-backed, and asynchronous processing architectures * Skilled in observability practices including distributed tracing, metrics, and log aggregation * Strong background in Microsoft SQL Server and experience optimizing relational data access * Familiar with other database technologies (NoSQL, distributed databases) * Deep experience with the .NET ecosystem, with exposure to other technical stacks as a plus * Familiar with containerization, cloud-native architectures, and Kubernetes deployment patterns * Strong architectural skills with a focus on reliability, scalability, and performance * Proven ability to lead architecture across multiple systems and teams * Experience writing and optimizing parallel and asynchronous code * Strong knowledge of IHE profiles, FHIR, and other healthcare data exchange standards is a significant plus * Front-end development experience with modern JavaScript/TypeScript frameworks is a plus but not required * Bachelor’s degree or equivalent experience in a technical field Benefits: ELLKAY offers a comprehensive and competitive benefit package that starts day one! Including: • Medical, Dental, and Vision benefits, • Employer-paid Life and LTD, • 401k w/ matching – once eligibility is met, • Work/life balance, • Paid Volunteer Program, • Flexible working hours, • Unlimited PTO, • Remote work options, • Employee Discounts, • Working with talented, collaborative, and friendly people who love what they do, • Professional growth within, • Innovation environment At ELLKAY, we are committed to operating as a hybrid workplace, offering employees flexibility in how they structure their time between in-office and remote work. We recognize the significance of fostering connections, collaboration, and creativity within our office culture and its positive impact on our business. Our philosophy of operating as a hybrid workplace underscores our dedication to enabling employees to tailor work-life balance to their individual preferences. For those who do not live within 40 miles of one of our offices, we are open to considering remote work for candidates whose skills and experience strongly align with the role. While we prioritize a hybrid work environment for most roles, we understand the importance of flexibility and are open to remote work for specific positions and specialized skill sets. For more information on our company, visit . ELLKAY LLC is a Smoke-Free Workplace. ELLKAY, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job Description T&M Associates is seeking a skilled and experienced Plumbing and Fire Protection Engineer to join our growing MEP team. The ideal candidate will have 12+ years of experience designing plumbing and fire protection systems for a wide range of building types. This individual will support project objectives, contribute to financial success, assist with technical review of proposals and project tracking, and help mentor junior technical staff. The ideal candidate will have experience designing systems including domestic hot and cold water, sanitary and vent, storm drainage, natural and medical gas, compressed air, sprinkler, fire pump, and clean agent fire suppression systems. This position can be based out of any of our NJ or PA offices. Qualifications: • 12+ years of experience in plumbing and fire protection design across various building types, • Bachelor of Science in Mechanical Engineering (preferred), • Professional Engineer (PE) License (preferred), • Certified Plumbing Design (CPD) and/or Certified Fire Protection Specialist (CFPS) certifications (preferred), • Proficiency in the latest version of AutoCAD required, • Experience with Revit preferred T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job DescriptionTitle: Enterprise Applications Engineer Location: New Jersey Office (Hackensack) Job Summary:Seeking an Application Engineer whose primary focus will be ensuring the stability, availability, and supportability of the Firm’s Enterprise application stack. This person will work closely with the Enterprise Applications Manager, Accounting, Marketing, Records, and other firm personnel to ensure all applications run optimally and without interruption. Good communication, technical and analytical skills are required, with a heavy focus on Windows Server and SQL (querying, reporting in SSIS and other tools, maintenance, documentation, and upgrades). Some programming knowledge would be a ‘nice to have,’ but expert knowledge is not required. Essential Job Functions and Responsibilities: • Administer, develop, and support the Firm’s Elite 3E platform. Including, but not limited to Thompson Reuters Elite 3E, Paperless Performa, Design Gallery (“DG”), Workspace, and Iridium., • Responsibilities within the firm’s financial/marketing application stack include:, • Scheduling month-end maintenance such as: Windows updates, SQL maintenance, query optimization, and security patching, • Inter-department coordination during system upgrades; assessing and communicating risk factors of upcoming upgrades, primarily when integrated systems cause a “trickle-down” effect, • Coordinate with application stakeholders and IT team to prioritize and address issues and future objectives for financial systems, • Responsible for testing financial system applications during system changes, enhancements, upgrades, and monthly system maintenance,, • Documentation of system setup, integrations, backup, and disaster recovery processes, • Communicates and informs the department and management of project statuses, issues, and proposed resolutions, • Manage vendor support tickets, • Track and optimize system performance and storage utilization, plan for necessary hardware or software upgrades to support system growth, • Research and evaluate new tools/technologies to improve the current application stack, • Utilize tools to protect application source code and maintain versioning., • Any additional responsibilities as required by management, • Other responsibilities include:, • Compulaw administration, maintenance and integrations, • Support requests/tickets escalated from the helpdesk team, • Documentation of processes/procedures, ‘how-to’ guides, and frequently asked question resolution, • Basic ‘end user’ application troubleshooting and maintenance such as: FasTax, B&A Forms, Allstate legal forms, LexisNexis etc.Knowledge, Skills & Abilities:, • 3+ years’ experience operating with legal accounting and time management software required, experience with Elite 3E preferred, • Fluency in the Elite 3E SQL database schema preferred or demonstrated ability to develop such fluency, • Experience with maintaining 3E Templates (“Design Gallery”), Workspace and BizTalk, • Proficiency in Elite Application Framework and Tools; Example: IDE, • Knowledge of 3E Solutions Manager a plus, • Proficiency in SQL reporting (“SSRS”), • Ability to learn functional and technical integration aspects of the firm’s applications such as Iridium, Foundations, Concur, • Experience administering Windows Server, • Solid technical foundation with the ability to troubleshoot, diagnose and resolve complex problems and implement solutions with minimal guidance, • Self-motivated person with excellent time management skills, • Strong analytical skills with the ability to communicate results, • Excellent verbal and written communication skills, and the ability to communicate with staff of varying technical expertise, • Proficiency in XML/XSLT transformation, • Knowledge of C# and Visual Basic .Net, HTML5 programmingEducation and/or Experience:, • Minimum 3 years’ experience in management, design, and implementation of large enterprise applications in a heterogeneous operating system environment with hands-on experience in maintaining mission critical enterprise applications at a high level of availability., • Requires broad knowledge of the specialized and technical field of computer science, and business/management acumen equivalent to a complete college or university education; includes thorough skills knowledge., • 4-year college degree preferred, equivalent experience considered.Technical Skills & Requirements: Minimum of 5 years’ experience in the design, implementation and maintenance of Windows computer systems. Experience with Microsoft SQL required, working knowledge of Active Directory administration and maintenance a plus.

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Utility Engineer to join our team. As a Senior Utility Engineer, you will be responsible for supporting the planning, design, and preparation of contract documents for the construction of stormwater and utility infrastructure. Responsibilities: • Manage utility aspects of projects, oversee design and production of plans and specifications, and ensure that the work is produced on schedule profitably., • Collaborate with project teams to analyze utility relocation conflicts on infrastructure projects., • Review and provide feedback on Utility Owner design submittals., • Coordinate utility design efforts with consultants and stakeholders., • Perform constructability reviews to ensure compatibility with construction methods., • Analyze projects and direct ASCE SUE investigations., • Compile and compute a variety of engineering data., • Prepare plans, and details and develop engineering drawings, specifications, and other project deliverables., • Support and participate in the development and mentorship of staff. Qualifications: • Bachelor’s degree in civil engineering or related field., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • Must have a minimum of 5 years of experience in project engineering design., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • MS Office proficiency., • Experienced with ASCE standard governance of subsurface utility engineering., • Experience with different construction techniques and constructability of utilities and associated civil aspects in design-build projects., • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites., • Work productively and meet deadlines timely., • Ability to independently manage small to medium size projects.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 - $120,000 Powered by JazzHR 6Q30GcCRu9

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role As a Field Process Engineer I at Weee, you will drive initiatives to optimize operational processes, improve efficiency, and deliver world-class customer experiences. This role requires strong analytical skills, project management expertise, and the ability to collaborate across multiple teams and stakeholders to execute scalable solutions in a fast-paced, dynamic environment. Responsibilities • Lead small-scale cross-functional projects focused on operational excellence and process improvement., • Partner with Central PE to identify and track operational metrics., • Collaborate with Operations, Supply Chain, and PE teams to implement solutions that improve workflow efficiency and reduce costs., • Identify and address basic root causes in current processes, create corrective action plans to achieve operational goals and ensure alignment with operational standards., • Help implement solutions and provide training to address operational challenges., • Conduct time studies and analyze data to identify trends, root causes, and opportunities for system and process improvement., • Collaborate with the central PE team and operation team to develop and maintain the standard operating procedures (SOPs) and work instructions., • Proactively mitigate safety risks within the production process, ensuring adherence to safety protocols., • Support warehouse daily operations as needed including 5S maintenance, equipment forecasting and management, • Bachelor's degree in Business, Operations, Supply Chain, Engineering, or a related field., • 1+ years of experience in internships or project management within operations, supply chain, or logistics., • Strong analytical skills with experience in data analysis tools (e.g. Advanced Excel)., • Understanding of basic concepts of lean manufacturing, continuous improvement, and Six Sigma, • Ability to work Individually with observation and analysis tools (e.g. DMAIC, fishbone diagram), • Excellent communication skills with the ability to present complex ideas clearly to both technical and non-technical audiences., • Proven ability to manage multiple priorities and work effectively in a fast-paced, ambiguous environment., • Ability to work under extreme temperatures(0~30°ree;F) in Freezer/Cooler environments, • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • The US base salary range for this full-time position is $63,000 - $74,000, • This role may be eligible to discretionary bonus, incentives and benefits Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description • Visit cement plants, building strong relationship with the cement market., • Regular communication with Company’s Director of Cement Additives and Company’s Technical Service., • Follow closely on-site field trials., • Jointly work with commercial/technical team to understand the customer requirement, and making adjustment of products to support existing business and capture new market opportunities to grow the business., • Jointly work with commercial team to gather market intelligence to better understand industry trend and competitors. Working with Product Management to develop new product to grow and improve profitability of the business., • Develop and regularly update competitors’ product database to support commercial growth., • Develop, implement, and manage customer complaint process to make sure all complaints are well taken care, timely response to customers, and high degree of customer satisfaction is achieved., • Provide value added service to customer – seminar, technical presentation, on site troubleshooting., • Serve as the technical expert to SIKA’s customers by troubleshooting technical issues at the Cement Plant, demonstrating Sika’s product capabilities, recommending solutions and serving as Sika’s representative in technical proposals to the customers. Provide first level of field troubleshooting to customers., • Promote safety working environment and commit to achieve zero accident target., • Report to Direct Manager on activity, market, competition, key projects, trials.Qualifications, • Diploma / University degree in engineering (preferably chemical engineer), • 3-5 years hands-on field experience in Cement Industry, • Strong relevant industry and segment knowledge & network, • Strong technical aptitude and willingness to learn and apply knowledge, • A self-starter, excellent time and self-management, require minimum supervision, • Ability to work independently and willing to travel on a frequent basis, • Excellent customer relationship management skill, • Ability to influence and lead multi function to achieve goals, • Good communication and team player Additional Information · 401k with Generous Company Match · Bonuses · Medical, Dental, and Vision Benefits · Paid Parental Leave · Life Insurance · Disability Insurance · Paid time off, paid holidays · Floating holidays + Paid Volunteer Time · Wellness/Fitness Reimbursements · Education Assistance · Professional Development Opportunities · Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Utility Project Manager to join our team. As a Project Manager specializing in utilities engineering, you will be responsible for leading and overseeing projects related to utility design, coordination, and construction. Requirements: • Manage and supervise utilities engineering projects, including water, sewer, gas, electric, and telecommunications infrastructure. Serve as the main point of contact for clients, maintaining strong relationships and ensuring effective communication throughout the project lifecycle., • Lead and mentor a multidisciplinary project team, providing technical guidance and ensuring project objectives are met., • Develop comprehensive project plans, including scope, budget, schedule, and resource allocation., • Coordinate with internal and external stakeholders, such as utility companies, regulatory agencies, and subcontractors, to ensure seamless project execution and compliance with regulations., • Conduct thorough reviews of utility designs, ensuring constructability, efficiency, and adherence to industry standards and best practices including ASCE SUE standards, • Prepare and review project deliverables, including design plans, specifications, reports, and cost estimates., • Monitor project progress, identify potential risks and challenges, and implement effective mitigation strategies., • Prepare comprehensive technical reports or the presentation of complex data, findings, or analyses., • Coordinate complex multi-disciplinary projects., • Perform additional responsibilities as required by business needs., • Participate in project or pursuit meetings, including those onsite when necessary., • Support and participate in the development and mentorship of staff., • Stay updated on emerging trends, technologies, and regulations in the utilities engineering field. Qualifications: • Bachelor's degree in Civil Engineering or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • Minimum of 8 years of experience in utilities engineering, with a focus on project management. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $130,000 - $150,000 Powered by JazzHR lCEsNSzdXh

Job Description The role of Application Engineer / Service Technician at Royal Master Grinder involves many different disciplines. Primarily it involves the interaction between all disciplines within the company to bring a project to conclusion and implementation for the end user. This involves working with our engineering, assembly, sales and customer service departments. The ultimate result of this is the completion of the customer’s factory acceptance test as well as installation at the customer facility. Requirements for this job is a good mechanical aptitude, communication skills, and a desire to learn. Every application that you will work on is different thus challenging. Key Responsibilities:

Job DescriptionYU & Associates' is currently searching for an Entry-Level Civil Engineer to join our site/civil department in our Elmwood Park, New Jersey location. The individual will be working on site and airport design, designing mixed-use developments, residential, higher education, and other exciting land development projects. This position will serve as a member of an integrated design team and be responsible for coordinating civil design along other disciplines, to meet project schedules and budgets, while working directly under licensed Engineers. Qualifications: • Bachelor's degree in civil engineering Required; master's degree Preferred., • EIT is strongly preferred., • Demonstrate basic proficiency with AutoCAD Civil 3D, have strong technical skills, and possess the ability to learn and apply new skills quickly and efficiently., • Proficiency with Microsoft Office software including Word, Excel, and Outlook is needed., • Knowledge of MicroStation is a plus., • You must demonstrate strong written and oral communication skills., • Committed to working efficiently to complete tasks under strict schedule restraints., • The ability to work independently or within a team environment., • You must be a self-starter with strong problem-solving skills., • Understanding of basic engineering theories and principles., • Understanding of basic practices of researching engineering and design issues, evaluating alternative, making sound recommendations., • Own transportation and a valid driver's license., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR hPJkGHJLqc

Job DescriptionThe Project Manager will be in charge of supervising the development of complex projects while observing pre-determined conditions (cost, quality, safety, timelines). The Project Manager will participate in defining the project's specifications, planning its implementation and drawing up its budget. They will be involved with both technical and financial aspects and coordinate the work of the various participants involved. Ensure that the development methods, timelines and costs are observed during each phase of the process. Serves as a primary contact for our clients and is responsible for ensuring that the contracted services are provided in a timely and professional manner. Has overall responsibility for all aspects of, and the success of, all assigned projects. Responsibilities: • As the project progresses the project manager will be responsible for identifying unanticipated tasks that can increase the cost of the project or delay meeting the assigned schedule., • The project manager will monitor the progress of the project; Interprets, organizes, executes, and coordinates assignments., • The project manager will establish the project budget, track the actual project expenditures against the forecast expenditures and will implement corrective action as needed. The project manager will prepare cost to complete estimates to determine whether the project can be completed within the assigned budget., • The project manager will be responsible for assuring that all internal project quality assurance procedures are followed., • Applies a thorough knowledge of current principles and practices of engineering as related to the variety of aspects affecting the firm., • Supervises a staff of engineers and technicians., • Plans, schedules, or coordinates the preparation of documents or activities for multiple major projects., • Responsibilities may include marketing, budgeting, financial managements, schedule coordination and resources allocation., • Performs preliminary engineering design and/or reviews the design and drafting work of staff or project engineers, CAD operators., • Coordinates work with other engineers and professionals within and outside own discipline, and with support services staff., • Assisting in company-wide business development in all disciplines of the firm’s practice.Qualifications:, • Master’s degree in engineering from an accredited college or university., • Registered Professional Engineer in New Jersey or New York., • Possess 8+ years of engineering management experience., • Proven ability to identify, develop and mentor talent., • Excellent listening, written and oral communication skills., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.Strong technical writing, communication skills and interpersonal skills are expected at this level, proven through technical presentations, technical papers and/or participation in technical committees. We offer employees competitive compensation packages; benefits packages; life insurance, short/long term disability insurance; and 401K retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation ZKzQ8ddoBn

Job DescriptionScientist – Engineer, MSAT The Scientist-Engineer, MSAT performs process and analytical experimental studies as part of a team that is effectively delivering cell therapy services to clients in accordance with defined scope of work, timelines, and budgets. This includes leading projects in process development, technology transfer and continuous improvement of our client's novel manufacturing processes. Our goal is to support our clients in developing commercially viable cell therapy products, so that they can become accessible to all. • Accountable for the design and execution of experimental studies in the laboratory, for example:, • Perform laboratory experiments for client projects, • Perform analytical testing for client projects, • Preparation and scheduling of laboratory equipment for experiments, • Provide technical leadership of client products during manufacturing and development, for example:, • Direct technical communication with clients during manufacturing and development, • Support manufacturing in identifying and resolving manufacturing process constraints, • Lead the generation of manufacturing and development documentation, for example:, • Generating experiment protocols and reports for development projects, • Generating draft batch records and other manufacturing documentation, • Generating manufacturing risk assessments, such as FMEA, • Perform data analysis to reach actionable conclusions, for example:, • Compile and analyze experimental data, • Present experimental data internally and externally to clients, • Supervise direct reports.REQUIREMENTS, • Bachelor's degree in relevant life science or engineering discipline, • Minimum of 3 years' experience in aseptic cell processing, cell culture and cell analytics under the guidance of scientific protocols, • Demonstrated ability to deliver projects to specific timelines and budgets, • Experience in working effectively and delegating tasks in a team-based environment, • Demonstrated ability in technical writing and the preparation of, protocols and reports, presentations and/or other communications, • Basic understanding of the technical principles, theories and concepts of cell therapy or similar products, • Aseptic processing, Good Manufacturing Practice (GMP), communication skills, specific process and analytical equipment, • This job may require occasional evening and weekend work.

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job Description Made4net is a leading provider of supply chain execution software solutions. Our innovative technology helps businesses optimize their supply chain operations, increase efficiency, and improve overall productivity. With a global presence and a commitment to excellence, Made4net is at the forefront of the industry, serving a diverse range of clients across various sectors. Purpose of the Job: The .Net Developer is responsible for providing specialized technical support for systems and applications that were developed with the .NET framework. Someone in this role will be required to understand, determine and resolve any issue related to .NET applications. Ensuring that all .NET applications and systems are performing adequately and reliably. The .NET Support Engineer will work closely with the Project management team to troubleshoot and resolve any software bugs and to provide guidance on best practices to ensure system functionality and provide user support. Core Duties and Responsibilities: * Work with implementation team throughout entire client project cycle * Perform technical analysis and design solutions for client requirements. * Develop Customized addons and modifications for client specific requirements. * Build integration services with external management systems (ERP, MRP, OMS etc.) as well as control systems for Material Handling automation systems Guided MHE equipment (Robotic systems, Conveyors etc.) and User communication devices (Mobile, Voice, Vision etc.) * Support existing installations with troubleshooting and maintenance. * Incorporate changes and enhancements into client-specific deployed solutions. Core Competencies: • Collaborates- Building partnerships and working collaboratively with others to meet shared objectives, • Resourcefulness- Securing and deploying resources effectively and efficiently .NET – All versions starting from 2.0 to most recent, and Core * C#, VB.NET, Visual Studio, Azure DevOps * Windows Server management and tools * Windows Applications and Services * MSMQ * Web Services: WSDL, SOAP, REST, XML, JSON, XSLT, IIS * Web Scripting * SQL server: DB design, complex Views and Stored Procedures, troubleshooting and optimizing. * Knowledge of mobile platforms (Android, iOS) a plus Education Requirements: * Bachelor's degree in computer science or equivalent with work experience in application development using the technologies described above. Other Required Skills: * Working well in teams. * Good communication and people skills. * Responsiveness and adaptability. * Task oriented problem Benefits Offered: * Health insurance (medical, dental, vision) with a robust wellness program to support your physical and mental well-being * Generous paid time off policy * Company-matched 401(k) retirement plan to help you secure your future * Tuition reimbursement program to support your continued education and career advancement * Employee assistance program providing confidential counseling and support services for personal challenges * Discretionary employee bonus program * Employee Discounts and perks through our PEO Pay range: $80,000.00 - $110,000.00 yearly This position offers a competitive salary package that is commensurate with your years of experience in the field and the specific skills you bring to the role. Ability to Commute: Teaneck, NJ 07666 (Required) Work Location: Hybrid remote in Teaneck, NJ 07666 Physical Demands: The employee must occasionally lift and/or move up to 15 pounds from a floor position to an over the head position. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. While performing the duties of this job, the employee is regularly required to sit, stand, verbally communicate, and perform intricate finger dexterity to type or manipulate electronic documents while speaking or listening. Made4net is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Transportation Engineer to join our team. The successful candidate will manage, organize, design, and execute highway, roadway, and other Civil Engineering projects. Responsibilities: • Executes required aspects of roadway engineering based on a solid understanding of engineering fundamentals and advanced concepts., • Responsible for the design of roadway horizontal and vertical geometry, • Design Maintenance of Traffic (MOT / MPT) plans and specifications, • Coordinates a multi-disciplinary team to deliver projects and tasks., • Coordinates and reviews the work of the project team comprised of engineers, and technicians., • Assist project manager with technical and management collaboration., • Collaborate with project manager for project progress and status reports, schedule, and budget., • Tracks the progress of deliverables, client reviews, technical input, and comment resolution., • Assist project manager with scope and fee for projects., • Prepare administrative, technical, or statistical reports on traffic-operation matters, such as accidents, safety measures, or pedestrian volume or practices., • Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion., • Support and participate in the development and mentorship of staff.Requirements:, • Bachelor’s degree in civil engineering is required, emphasis in transportation preferred., • Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • Minimum 5+ years of transportation design experience. Highway/roadway design experience a plus, • Strong written and verbal communication skills., • High attention to detail and accuracy., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads) and able to assist others as needed., • Proficient in Microsoft Office Suite. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $105,000 TO $120,000 Powered by JazzHR nK4spuz8to

Job Description Job Title: Project Engineer Company: PTI Tech Location: Clifton, NJ (On-site) Industry: Manufacturing / Metal & Plastic Injection Molding Experience Level: Mid to Senior Level About PTI Tech PTI Tech is a leading provider of advanced manufacturing solutions, specializing in precision metal and plastic injection molding for the aerospace, medical device, industrial, and defense industries. We are growing our technical team and seeking a skilled and motivated Project Engineer to support innovative product and process development efforts. Position Summary PTI Tech has an immediate opening for a Project Engineer to support the design and development of new products, components, and advanced manufacturing processes. This position plays a key role in PTI’s R&D and production programs, working closely with the Engineering Manager and cross-functional teams. Responsibilities include initial concept design, 3D modeling, analysis, prototyping, process development, vendor coordination, and supporting the implementation of novel engineering solutions. The ideal candidate is passionate about mechanical design, manufacturing innovation, and automation. We’re looking for a hands-on engineer with strong problem-solving skills, project leadership experience, and the ability to work effectively in a fast-paced, team-oriented environment. Key Responsibilities Design & Development • Develop production processes, tooling, fixtures, and manufacturing cells with a focus on quality and repeatability., • Perform technical and requirements analysis, researching new materials, technologies, and processes., • Apply DFM to assess part moldability and recommend design improvements for injection molding (plastic, metal, ceramic)., • Lead engineering projects from concept through production, coordinating cross-functional teams and external partners., • Create and manage project timelines, task assignments, and deliverables., • Write detailed work instructions, set up manufacturing equipment, and establish standard operating procedures (SOPs)., • Design and implement automation processes to increase manufacturing efficiency and consistency., • Program and troubleshoot Universal Robots and Arburg robotic systems., • Design and develop custom end-of-arm tooling for robotic automation., • Integrate automation systems into production workflows and support new product introductions (NPIs)., • Support ongoing production by resolving technical issues and improving part quality., • BS or MS in Mechanical Engineering, Materials Science, or related field., • Proficiency in CAD design using SolidWorks., • 5+ years of experience in mechanical design and development of injection-molded or over-molded parts and assemblies., • Strong knowledge of DFM, injection molding (plastic/metal), tool and mold design, and automation integration., • Experience with machine shop processes: turning, milling, EDM, and CNC machining., • Fluent in interpreting engineering drawings and applying GD&T., • Strong project management and organizational skills., • Experience in aerospace, medical device, defense, or industrial sectors., • Familiarity with additive manufacturing., • Experience with process validation, lean manufacturing, and quality systems., • Program management experience is a plus. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Are you ready to shape the future of energy-efficient, AI-ready data center infrastructure? (Hybrid Position) Join INTUVA, a pioneering leader in designing, building, and maintaining next-gen data centers, and help us “Future Proof Your Data Center.” We’re looking for a Senior Electrical Engineer who’s equal parts innovator, builder, and leader—someone who can design mission-critical power systems that enable the seamless operation of advanced workloads in a hybrid world. Why This Role Matters: As a Senior Electrical Engineer at INTUVA, you’ll be the brain behind the power—literally. Your work will power some of the most demanding AI/HPC systems in the industry. You'll design electrical infrastructure that’s not just resilient and scalable, but also future-ready and energy-efficient. This isn’t just a job, it’s a mission. You’ll influence the direction of data infrastructure for enterprise, institutional, and government clients nationwide. What You’ll Be Doing: • Lead electrical design for modular, scalable, and high-density data center environments including edge, colo, and AI/HPC workloads., • Deliver detailed electrical system plans—covering UPS, PDU, switchgear, generators, and more., • Collaborate with internal teams and external partners to ensure compliance, innovation, and flawless execution., • Integrate emerging power solutions such as fuel cells, evaporative cooling, and liquid cooling technologies., • Serve as a technical expert during sales processes, proposals, and client consultations., • Mentor junior engineers and guide cross-functional project success., • 7+ years in electrical engineering, preferably in mission-critical facilities or data centers., • Licensed Professional Engineer (PE)., • Expert in power distribution, energy efficiency, redundancy, and high-density systems., • Proficient with tools like AutoCAD, Revit, ETAP, and/or SKM., • Strong project leadership and communication skills., • Connector & Solver – Goal-driven, detail-oriented, and highly productive., • Inventor & Relator – Innovative yet grounded, able to collaborate with diverse teams., • Be part of a team leading the charge in data center transformation through innovation and sustainability., • Work on impactful projects that support AI, machine learning, and enterprise digital transformation., • Join a culture rooted in integrity, accountability, adaptability, and continuous learning., • Competitive salary and performance-based bonuses, • Flexible hybrid work schedule, • Healthcare, dental, vision, and 401(k), • Professional development and licensing support

Job Description T&M Associates, an ENR Top 200 Environmental Firm, is seeking a dynamic and experienced Regional Market Sector Leader to expand our existing Remediation Practice in the New Jersey region. This role will be critical in growing our market presence and business, focusing specifically on industrial remediation services. As a Regional Market Sector Leader, you will lead the growth and market expansion of T&M Associates' Industrial Remediation Practice within the New Jersey region, developing and strengthening client relationships within the industrial and private sectors, focusing on market strategy, branding, growth and the development of service offerings. This position offers a unique opportunity for a results-driven leader to grow and develop a successful industrial remediation practice while contributing to the overall success of the firm in the New Jersey region. If you are a motivated and experienced professional with a passion for industrial remediation, we invite you to apply. Key Responsibilities: • Develop and execute a comprehensive business development strategy to build new relationships with industrial clients, expand market share, and identify new opportunities for growth within the industrial remediation space. This includes leveraging existing relationships, cultivating new business with clients, developers, manufacturers, and other key stakeholders, and providing strategic direction for expanding service offerings and identifying new revenue streams., • Lead the preparation of technical proposals, cost estimates, and risk assessments for industrial remediation projects, ensuring competitiveness and alignment with client expectations., • Foster a collaborative team environment by mentoring and managing a diverse team of professionals, including Licensed Site Remediation Professionals (LSRP), engineers, scientists, and project managers. Provide leadership in recruiting and retaining top talent., • Monitor industry trends and regulatory changes to ensure the practice remains ahead of the regulatory curve and to be well-positioned for future business opportunities., • B.S. in Civil or Environmental Engineering, Geology, Hydrogeology, or a related field from an ABET-accredited university. A PE (Professional Engineer) or PG (Professional Geologist) license is highly preferred., • 15-20 years of experience in the environmental industry, with a significant focus on industrial remediation and site clean-up projects involving soil, groundwater, and hazardous waste management., • Proven expertise in the industrial remediation sector, particularly in the New Jersey region, with established relationships with key industry players, professional partners, and regulatory agencies., • Strong knowledge of regulatory frameworks such as RCRA, CERCLA, TSCA, and relevant state-led programs (e.g., NJDEP regulations)., • Demonstrated success in business development, including client relationship management, proposal development, and securing new work in the industrial sector., • In-depth knowledge of the environmental remediation process, including site investigations, remedial design, and the operation and maintenance of remediation systems. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager specializing in water resource engineering, you will be responsible for leading and managing projects related to water management, drainage systems, flood control, and watershed management. Responsibilities • Lead and oversee water resource engineering projects, including the design, analysis, and implementation of water management systems, drainage systems, and flood/resiliency control measures., • Serve as the primary point of contact for clients, ensuring effective communication and maintaining strong client relationships throughout the project lifecycle., • Manage and mentor a multidisciplinary project team, providing technical guidance, assigning tasks, and ensuring project objectives are met., • Develop comprehensive project plans, including scope, budget, schedule, and resource allocation., • Coordinate with internal and external stakeholders, such as government agencies, environmental consultants, and contractors, to ensure project compliance and successful execution., • Conduct hydrologic and hydraulic modeling, analyze data, and prepare reports and recommendations for water resource management projects., • Evaluate and design stormwater management systems, including detention basins, green infrastructure, and erosion control measures., • Review and approve project deliverables, including design plans, technical specifications, and construction documents., • Monitor project progress, identify potential risks and challenges, and implement effective mitigation strategies., • Ensure compliance with applicable regulations, permits, and environmental standards., • Bachelor's degree in civil engineering, Water Resources Engineering, or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years of experience in design, planning, and implementation of stormwater and hydraulic elements with a focus on project management, • Proven track record of successfully managing water resource engineering projects, including drainage systems, flood control, and watershed management. Strong knowledge of hydrology and stormwater and green infrastructure design., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient with stormwater modeling software such as CivilStorm or StormCAD required., • Business development skills and the proven ability to win work a plus., • Good client relationship development sills., • Experience writing proposals, scopes of work, and budgets for projected work., • Ability to effectively communicate at all levels of the organization., • Ability to manage & mentor staff, and direct resources effectively in a positive manner., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $83,000 - $95,000 Powered by JazzHR wc2KLKDjpk

Job Description T&M Associates is looking for a highly motivated Civil Engineer to join our Land Development team. The ideal candidate will have experience in technical design and project management roles focused on Land Development in New Jersey (experience in NYC is a plus). The successful candidate will possess expertise in zoning analysis, site design & layout, grading & drainage design, utility layout, stormwater management, soil erosion and sediment control, flood hazard design, and relevant local, regional, and state regulations. This position offers a hybrid work arrangement, combining remote work with in-office collaboration. Key Responsibilities: • Oversee the day-to-day operations of the group in collaboration with the Department Manager, Regional Market Leader, and other key stakeholders., • Manage projects for core clients, ensuring on-time delivery, budgets, regulatory compliance. Responsibilities include project scheduling, budgeting, invoicing, and proposal preparation., • Bachelor’s degree in Civil Engineering or a related field is required., • Professional Engineer (PE) License is required (NJ or NY license preferred)., • 8+ years of experience in land development, including expertise in zoning analysis, land planning, grading, drainage, utility layout, stormwater management, and other related areas. Experience with NJDEP & NJDOT permitting., • Proficiency with AutoCAD, Civil3D, and stormwater modeling software., • Proven experience in technical, project, and client management roles., • Strong leadership capabilities with experience supervising, mentoring, and developing junior staff., • Exceptional project management skills, including planning, scheduling, budgeting, and task delegation., • Ability to work both independently and collaboratively in a fast-paced environment. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job DescriptionWe are hiring a Structural Engineer with 36 years of experience to lead the analysis, design, and documentation of structural systems for a variety of building and infrastructure projects. The role requires strong technical capabilities, coordination skills, and the ability to manage project tasks with minimal oversight. Responsibilities: • Perform structural analysis and design of steel, concrete, wood, and masonry structures., • Develop engineering reports, calculations, and construction documents., • Review shop drawings, RFIs, and submittals during construction., • Collaborate with architects, contractors, and clients to ensure design intent is met., • Support junior engineers and participate in QA/QC processes. Applicant must be a NJ/NY Permanent Resident who has their own transportation to Lyndhurst on a daily basis.

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Water Resource Engineer to join our team. As a Senior Water Resource Engineer, you will play a critical role in the planning, design, and management of water resource projects, focusing on civil engineering, hydraulic modeling, water control, and stormwater treatment structures. Job Description: • Support various phases of our water/wastewater design projects., • Prepare comprehensive reports, opinions, and recommendations based on research, analysis, and interpretation of studies., • Manage Water Resource aspects of project budgets and deadlines., • Leading project design efforts, and/or design team coordination., • Drafting and designing plans as necessary utilizing Civil3D software., • Liaise with clients, regulatory agencies, and stakeholders to ensure project objectives are met and maintain positive relationships., • Responsible for meeting internal and/or external deadlines., • Coordinating with other teams or groups to assure resource management for all projects or tasks., • Stay current with industry trends, regulations, and best practices related to water resource engineering., • Support and participate in the development and mentorship of staff.Requirements:, • Bachelor’s degree in civil engineering, concentration in Water Resources preferred., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • A minimum of 5 years’ experience in stormwater management systems, wastewater/sanitary systems, and project permitting is required., • MS Office proficiency., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • Knowledge of stormwater modeling software such as CivilStorm or StormCAD required., • Strong knowledge of hydrology and stormwater and green infrastructure design, • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 TO $120,000 Powered by JazzHR xnYke8mnHe

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role As a Field Process Engineer II at Weee, you will drive strategic initiatives to optimize operational processes, enhance efficiency, and deliver world-class customer experiences. Building on foundational expertise, this role demands advanced analytical capabilities, independent project ownership, and the ability to influence cross-functional stakeholders to deliver scalable, high-impact solutions in a rapidly evolving environment. Responsibilities • Lead medium-complexity cross-functional projects focused on operational excellence and process improvement., • Partner with Central PE to identify and track operational metrics., • Collaborate with Operations, Supply Chain, and PE teams to implement solutions that improve workflow efficiency and reduce costs., • Identify and address more complex root causes in current processes, create corrective action plans to achieve operational goals and ensure alignment with operational standards., • Help implement solutions and provide training to address operational challenges., • Analyze data to identify trends, root causes, and opportunities for system and process improvement., • Collaborate with the Central PE team to develop and maintain the standard operating procedures (SOPs) and work instructions., • Support Central PE team on system updates and Warehouse Management System new feature launches, • Proactively mitigate safety risks within the production process, ensuring adherence to safety protocols., • Conduct Gamba Walk and SOP audit, drive continuous improvement initiatives to reduce waste/cost, increase efficiency and improve quality, • Act as a mentor to provide guidance, training, and technical support to junior PEs, • Support warehouse daily operations as needed including 5S maintenance, equipment forecasting and management, • Bachelor's degree in Business, Operations, Supply Chain, Engineering, or equivalent experience working as a continuous improvement engineer, • 3+ years of experience in Warehousing Operations, Manufacturing, E-commerce, Fulfillment, Automation with a proven track record of leading multi-phase projects., • Strong analytical skills with experience in data analysis tools, e.g. Advanced Excel. SQL and Tableau are preferred., • Excellent communication and leadership skills including the ability to articulate strategic recommendations to senior leaders and influence decision-making., • Experience in risk management, managing budgets, labor planning or resource allocation in a project, • Experience in scaling operations within high-growth or tech-driven environments., • Knowledge of ERP systems and WMS systems., • Demonstrated ability to balance strategic thinking with hands-on execution in ambiguous scenarios., • Certifications such as PMP, Six Sigma Green Belt, or Lean Management are highly desirable., • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • The US base salary range for this full-time position is $75,000 - $90,000, • This role may be eligible to discretionary bonus, incentives and benefits Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job Description T&M Associates is seeking an accomplished Senior Water/Wastewater Engineer to join our team as a Department Manager within our Water Market. This is a critical leadership position, where you will manage multiple teams, including Group Managers, Project Managers, and Engineers, ensuring the successful execution of projects and achievement of business goals across the region. This position can be based in any of T&M’s New Jersey offices, including Middletown, Toms River, Mount Laurel, or Bloomfield. The Department Manager will lead water teams across North, Central, and South Jersey and work closely with market leaders to develop business strategies that align with overall company goals. This role also offers the opportunity to collaborate with the Regional Market Leader in the Northeast to plan and drive growth initiatives in the Water sector. Key Responsibilities: • Lead and manage multiple technical teams, including Group Managers, Project Managers, and Engineers, to ensure successful project completion and business outcomes across the region, • Provide strategic leadership and direction on water/wastewater engineering projects, ensuring compliance with all technical and regulatory standards, • Guide the team in the design, planning, and optimization of infrastructure for water systems such as treatment plants, watermain replacement, sewer systems, booster stations, and wastewater pumping stations, • Oversee business development efforts, including proposal preparation, and collaborate with peers across the organization to support team goals and company success, • Coordinate and manage the delivery of projects, ensuring they meet established deadlines, budgets, and quality standards, • Monitor and manage project finances, including budgeting, forecasting, invoicing, and collections, • Mentor and develop staff through effective recruitment, training, and performance management practices, • Bachelor’s Degree in Civil Engineering required, • Professional Engineer (PE) license required, with New Jersey licensure preferred, • 15-20 years of experience in water, wastewater, and sewer engineering, with a strong background in project management, client relations, and staff development, • Proven experience in managing large-scale water/wastewater projects, including budgeting, design, and client engagement, • Demonstrated expertise in business management, including workload forecasting, business planning, KPI attainment, invoicing/collections, recruitment, and staff development, • Strong leadership abilities with experience in team-building, collaboration, and strategic planning T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description Seeking a full-time Enterprise Applications Engineer for an on-site role. This person will be responsible for administration, monitoring and maintenance of the Accounting enterprise applications. Responsibilities: • Administer and support the Firm's Elite 3E platform, • Serves as the subject matter expert and technical resource for the Firm’s financial system both within the financial group and the IT department by providing expertise on issues of functionality, integration, performance/troubleshooting, design, deployment etc., • Administer all other systems in the Firm’s financial platform including various supporting systems in the 3E Elite application and tools including (but not limited to) Paperless Performa, IDE, Design Gallery (EDG), Workspace., • Responsible for the administration and support tasks related to the Elite 3E system. This can include but is not limited to:, • Scheduled month-end maintenance, • Upgrades to 3E, Workspace, and other related software systems, • Coordinate with database and application administrators on projects which are related to the financial system, • Responsible for development deliverables of Elite 3E customizations (forms, inquiries, reports, metrics, etc.) with quality and consistent integration between key financial applications and Document customization solutions., • Analyze and work with the Financial team users and IT team on the impact of vendor software upgrades, • Coordinates with both the Accounting and IT team, to prioritize and address issues and objectives for financial systems, • Responsible for testing financial system applications during system changes, enhancements, upgrades and monthly system maintenance, as well as, documentation of system integrations, backup and disaster recovery processes, • Project Management - create, track and update all Elite 3E customization and new project tasks., • Work closely with the Accounting team to deliver strategic projects, • Informs the department and management in a timely manner of project status, issues and proposed resolutions., • Manage vendor support tickets, • Track and optimize system performance and storage utilization, plan for necessary hardware or software upgrades to support system growth, • Research and evaluate new technologies to improve current application processes., • 3+ years’ experience operating with legal accounting and time management software required, experience with Elite 3E preferred, • Experience with maintaining Proforma Tracker, 3E Templates, 3E Workspace and BizTalk., • Proficiency in Elite Application Framework and Tools, including the IDE, Design Gallery (EDG), • Experience administering Windows Server, • Intermediate to advanced knowledge of SQL, • Application installation and configuration experience, • Fluency in the Elite 3E SQL database schema preferred or demonstrated ability to develop such fluency, • 5+ years’ experience in the management, design and implementation of Windows computer systems., • Experience administering and maintaining Microsoft SQL and MS Active Directory is desirable., • Experience with iManage document management administration, Thomson Reuters 3e Accounting management systems and Foundations system administration preferred., • Microsoft Certified Systems Engineer (MCSE) preferred, but not required.

Job Description 2024 was a Record Sales Year. Our Largest Sales Growth in Decades. 2025 is trending to be even better. Technical Sales Territory Manager for a Paterson, New Jersey based territory. Sell boiler and cooling tower water treatment chemicals with unlimited commission potential. Work out of your home in Paterson, Clifton, Newark or the surrounding area. Garratt-Callahan is a profitable and private nationwide water treatment chemical company that promotes from within. We are one of the largest private water treatment companies in the U.S. We are stable, and well respected in our industry. G-C is expanding nationwide, and we are looking for aggressive, smart, educated, and promotable Technical Sales Territory Managers to join our sales team. We offer training, technical support, and an unlimited no-cap flat rate commission. Sell water treatment boiler and cooling tower chemicals to a variety of industrial customers in a New Jersey based territory. Maintain the existing customer base and make cold calls to develop new business. Work alongside friendly, veteran salespeople. Garratt-Callahan is proud to offer: Compensation is based upon experience and the ability to succeed. $90,000 to $130,000+ first year for a qualified candidate. Great benefits including a corporate 401k, health, dental, vision, and life insurance. Industry competitive no cap flat rate commission plan. And we have not changed our commission plan in 25 years. Our top Territory Sales Managers make six figure commissions—on top of their salaries. Yes, you read that right. Unlimited commission, no cap. Expenses, and a Car Allowance of $675 per month. Technical Support and Ongoing Training. Stability and peace of mind. No layoffs in our 120-year history. Debt free, profitable, and growing. Join the winning team. Our 2024 sales were at all-time record levels. And 2025 sales are trending to finish at another record. We are essential providers to food processors, data centers, government, manufacturers, commercial & institutional, and over 2000 hospitals. To Apply, please log on to: Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans, and individuals with disabilities are encouraged to apply. You may live anywhere within Paterson, Clifton, Newark, or the surrounding area of Northern New Jersey. Thank you for considering the Garratt-Callahan Company. We also have multiple sales openings nationwide. Please visit the career section of our website: You must have at least a four technical degree to qualify for this position. Advanced degrees preferred. Military equivalent, such as Navy Nuclear Propulsion, or Army CBRN School, is also great. Requirements: You will be a successful applicant if you have a technical degree such as Chemistry, Chemical Engineering, Environmental Science, Biology or Mechanical Engineering. A minimum of one-year technical sales related to water treatment chemicals is required. Selling to a variety of industrial customers is preferred. Knowledge of the New Jersey industrial marketplace is preferred. NOTE: Garratt-Callahan does not sponsor work visas. No recruiters please. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at 650.697.5811. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. This phone line is only for disability assistance. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, us water, ge water, chemtreat, drew industrial, Barclay, solenis, kurita, chem-aqua, suez, Evoqua, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides.

About Us At INTUVA, we are more than engineers — we are innovators, problem-solvers, and trusted partners for mission-critical projects that shape the future. From advanced data centers to high-performance infrastructure, our work powers HPC and AI environments worldwide. We deliver excellence by combining technical expertise with a collaborative, client-focused approach. As we expand, we are seeking a Director of Engineering to lead our multidisciplinary teams, elevate our technical standards, and drive transformative project outcomes. The Role As Director of Engineering, you will set the vision for our engineering operations, oversee the execution of complex projects, and ensure the highest levels of quality and innovation. You will lead a team of engineers and designers across multiple disciplines, partner with clients at a strategic level, and play a key role in shaping the future of our company’s technical and design capabilities. You will be responsible for: • Providing leadership and strategic direction for all engineering and design activities across mechanical, electrical, and related disciplines., • Overseeing the planning, coordination, and delivery of high-performance building systems for mission-critical facilities., • Ensuring all projects meet technical, budgetary, and scheduling goals while exceeding client expectations., • Driving innovation in sustainable design, energy efficiency, and emerging technology integration., • Developing, mentoring, and inspiring a high-performing team of engineers and designers., • Building and maintaining strong relationships with clients, partners, and key stakeholders. What Success Looks Like • Delivering technically superior, code-compliant designs that align with client objectives and industry best practices., • Building a culture of technical excellence, collaboration, and accountability within the engineering team., • Establish yourself as a trusted advisor to clients and a thought leader in the industry., • Driving efficiency and innovation in design processes, resulting in measurable project improvements. What You’ll Need to Be Successful Essential Skills and Experience: • Bachelor’s degree in Engineering (Any Discipline, Required)., • Professional Engineer (PE) License (Required)., • 12+ years of engineering design experience with at least 5 years in a leadership role., • Proven track record leading multidisciplinary teams in the delivery of large-scale, complex projects., • Deep knowledge of applicable codes, standards, and best practices (NEC, ASHRAE, IEEE, IMC, etc.)., • Strong communication and negotiation skills — able to bridge technical expertise with executive-level discussions., • Experience managing project budgets, schedules, and client expectations. Preferred Qualifications: • Experience with mission-critical facilities, healthcare, or large industrial projects., • Advanced degree in Engineering or Management., • LEED accreditation or advanced knowledge of sustainable design strategies. Attributes We Value • Visionary Leader: You inspire teams to achieve excellence and think beyond the status quo., • Strategic Thinker: You make decisions that align technical capabilities with business goals., • Collaborative Influencer: You build trust across teams and with clients., • High Accountability: You take full ownership of results., • Innovator: You embrace new ideas, tools, and approaches to deliver better outcomes. What’s In It for You • The opportunity to shape the engineering direction of a growing, future-focused company., • A chance to lead complex, high-impact projects that define mission-critical environments., • A collaborative, energized culture where your voice and vision have a direct impact., • Ongoing professional development with support for certifications, leadership training, and conference participation., • Competitive compensation, performance-based bonuses, and a robust benefits package., • Flexible work arrangements and a strong emphasis on work-life balance.

Senior DeltaV Control Systems Engineer Lead Complex Life Sciences Automation Projects Control Associates is seeking an experienced Senior DeltaV Control Systems Engineer to join our elite engineering team. In this role, you'll serve as a technical leader on large-scale control system implementations for premier pharmaceutical and life sciences clients, taking projects from initial proposal through successful commissioning while mentoring the next generation of control systems engineers. About This Opportunity: This is more than just an engineering role - you'll be a trusted technical advisor to our most important clients in the pharmaceutical and life sciences industries. Working with cutting-edge DeltaV control systems, you'll design solutions that ensure the safe, efficient production of life-saving medications and treatments. Your expertise will directly impact critical manufacturing processes that serve patients worldwide. Your Leadership Impact: • Serve as Project Technical Lead Engineer or Project Engineer for complex DeltaV implementations, • Lead control system project implementation from proposal through startup and commissioning, • Proactively mentor and develop team members, fostering their technical growth and career advancement, • Develop sophisticated control strategies for pharmaceutical and life sciences applications, • Design and configure DeltaV graphics and control system databases, • Review and approve critical project design drawings, • Ensure comprehensive factory acceptance testing meets stringent industry standards, • Collaborate with Project Managers on planning, scheduling, and documentation, • Maintain cutting-edge expertise through continuous DeltaV and control systems training What You'll Bring: • Bachelor of science degree required, majors preferred include chemical engineering, biomedical engineering, electrical engineering, or computer engineering,, • 4+ years of industry experience in Pharma/Life Sciences environments, • Extensive DeltaV configuration experience with continuous or batch process control systems, • Experience with PLCs in batch or life sciences applications, • Knowledge of industry standards: ISA S88, GAMP5, and 21CFR11, • Ability to read and interpret P&IDs and instrumentation/controls wiring diagrams, • Experience with validation documentation (URS, GDS, DDS, FRS), • Site startup and process equipment support experience, • Database knowledge (SQL, Historians, querying), • Understanding of factory floor communication protocols, • Strong troubleshooting skills for process and process equipment, • Excellent communication skills for client-facing interactions How This Role Embodies Our Values: Customer Focus: You'll prioritize client needs by delivering exceptional technical solutions and maintaining strong relationships with pharmaceutical customers throughout the NYC Tri-State region. Collaboration: Working in a robust team environment, you'll achieve superior results by leveraging collective expertise and supporting multiple simultaneous projects. Innovation: You'll encourage thoughtful, creative solutions by developing cutting-edge control strategies and mentoring team members to think beyond conventional approaches. Integrity: You'll build trust through responsible technical decisions and honest client relationships, ensuring all work meets the highest pharmaceutical industry standards. Passion: You'll cultivate enthusiasm and dedication by continuously advancing your expertise and inspiring excellence in those you mentor. Professional Growth Opportunities: • Lead high-visibility projects for premier pharmaceutical clients, • Mentor and develop emerging engineering talent, • Continuous learning through company-provided DeltaV and control systems training, • Exposure to the latest pharmaceutical manufacturing technologies and industry standards, • Client site visits throughout the NYC Tri-State region Ready to Lead the Future of Life Sciences Automation? If you're an experienced control systems professional who wants to make a meaningful impact in pharmaceutical manufacturing while developing the next generation of engineers, this is your opportunity to join a team that values technical excellence, collaboration, and continuous innovation. Note: This position requires relocation to the NYC tri-state area if not currently local. Work visa sponsorship is not available. This is a direct hire fulltime position. Control Associates is an equal opportunity employer committed to diversity in the workplace. Control Associates is an equal opportunity employer committed to diversity in the workplace. Control Associates, Inc., offers competitive salaries that include a bonus potential. Base Salary range for this role is $90,000 - $120,000 Excellent benefits, including multiple medical plan choices, vision, and dental insurance with coverage for both employees and dependent family members. Medical and dependent care flexible spending benefits, health savings accounts, commuter tax benefit, company paid long-term disability and life/ADD insurance plans with a buy up option. Paid time off including vacation days, holidays, and sick days Our retirement plans include a 401(k) plan (with company match) and an Employee Stock Ownership Plan (ESOP), is a company-funded benefit that provides additional retirement compensation to qualifying employees. Certification/Training, we provide both in-house and Client/System specific technical training Control Associates Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, creed, race religion, color, national origin, citizenship, disability, sex, marital status, sexual orientation, familial status, gender, ancestry, or liability for services in the U.S. Armed Forces, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment. Control Associates participates in E-Verify. Click here to view About Control Associates Where Innovation Meets Industrial Excellence For over 90 years, Control Associates has been at the forefront of industrial process automation, transforming how critical industries operate across the New York tri-state area. What started in 1933 has evolved into a premier provider of cutting-edge process automation systems, software solutions, valves, actuation, pressure management, measurement technologies, and asset reliability services. Industry Expertise We're the trusted partner providing solutions and services in the Life Sciences, Natural Gas Distribution & Transmission, HVAC, Power Generation, Chemical Processing, and Downstream Hydrocarbons Industries. When precision matters, industry leaders turn to Control Associates. Global Partnership, Local Expertise Through our strategic partnership with Emerson, a global leader in process automation, we combine world-class technology with deep local market knowledge. This unique combination allows us to deliver solutions that are both innovative and tailored to our customers' specific needs. Our Culture of Excellence At Control Associates, we're driven by our core values: Customer Focus, Collaboration, Innovation, Integrity, and Passion. These values guide every decision we make and solution we deliver. We believe in building trust through responsible actions and honest relationships, while constantly pushing the boundaries of what's possible in industrial automation. Join Our Legacy of Innovation Based in Allendale, NJ, we're a team of problem-solvers, innovators, and industry experts who take pride in setting new standards for industrial process automation

Job Title: Geotechnical Project Engineer - Design Focused (Remote) Location: Fully Remote (U.S.-based candidates) Employment Type: Full-Time Overview: A dynamic and growing engineering consultancy is seeking a Geotechnical Project Engineer to support design-driven geotechnical projects across a variety of sectors. This fully remote role is ideal for a technically strong engineer who enjoys working independently and collaboratively on complex design challenges. The position offers flexibility, autonomy, and the opportunity to contribute to high-impact infrastructure and development projects nationwide. Key Responsibilities: • Perform geotechnical design and analysis for foundations, retaining structures, slope stability, and ground improvement., • Develop geotechnical reports, design calculations, and construction recommendations., • Collaborate with multidisciplinary teams including structural, civil, and environmental engineers., • Review subsurface investigation data and interpret geotechnical parameters for design., • Support project managers with technical input and coordination across project phases., • Bachelor's or Master's degree in Civil or Geotechnical Engineering., • 4+ years of geotechnical engineering experience with a strong design portfolio., • PE license or EIT working toward licensure., • Proficiency in geotechnical software (e.g., LPILE, Slope/W, PLAXIS, gINT)., • Strong written and verbal communication skills., • Competitive compensation and benefits., • Fully remote work with flexible hours., • Opportunity to work on diverse and technically challenging projects., • Supportive and collaborative team culture., • Professional development and growth opportunities.

Job Description T&M Associates is seeking a highly motivate individual to join our growing team as a MEP Group Manager within our Building and Facilities Market in New Jersey. This leadership role will oversee a multidisciplinary team of mechanical and electrical engineers. The Group Manager will be responsible for guiding project execution, managing staff performance, ensuring technical excellence, and maintaining client satisfaction. The ideal candidate will have experience managing complex engineering projects from concept through completion, with a focus on budget, schedule, and quality control. This hybrid position offers a flexible work environment, allowing for a mix of remote work and in-office collaboration. Key Responsibilities • Lead and mentor a team of mechanical, plumbing, and fire protection engineers., • Participate in business planning and project selection., • Oversee day-to-day team operations and ensure timely delivery of high-quality work., • Serve as the primary liaison between clients and internal project teams., • Ensure compliance with codes, standards, and industry best practices., • Monitor group performance to meet departmental KPIs and support business goals., • Drive continuous improvement in team processes and technical execution., • Bachelor’s Degree in Mechanical Engineering or a related field., • 10+ years of experience in mechanical engineering, including MEP/facilities design., • Professional Engineer (P.E.) license preferred, • Proven project management and team leadership experience., • Strong understanding of industry codes, standards, and compliance., • Proficient in AutoCAD and Revit; hands-on design experience preferred. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager, you will lead and oversee transportation engineering projects, ensuring their successful execution and delivery to clients. Responsibilities: • Manage and supervise transportation engineering projects, including highway design, traffic engineering, roadway improvements, transportation planning, and airport design. Serve as the primary point of contact for clients, maintaining effective communication and building strong relationships., • Provide technical expertise and quality reviews in the areas of highway design, and protection of traffic, transportation planning, and/or any combination thereof., • Report on project staffing needs, including, but not limited to, recruitment, development, retention, and succession of project staff., • Monitor project progress, identify risks and issues, and implement appropriate mitigation strategies., • Prepare project budgets, schedules and specifications for labor and materials., • Conduct regular project meetings, providing updates to stakeholders and ensuring alignment with project objectives., • Prepare and review project deliverables, including reports, design plans, specifications, and cost estimates., • Manage project budgets and finances, including tracking expenses, approving invoices, and ensuring cost control measures are in place., • Support and participate in the development and mentorship of staff., • Stay informed about industry trends, emerging technologies, and best practices in transportation engineering.Qualifications:, • Bachelor's degree in civil engineering or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years minimum transportation design experience. Highway/roadway design experience a plus, • Design Build project experience a plus., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient in Microsoft Office Suite, • Ability to lead a project and supervise technical staff., • Good client relationship development sills.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR GQDgokqKGY

Job Description A fast-paced and innovative technology solutions provider is seeking a proactive and technically skilled Help Desk Engineer to join its team. This role is ideal for a detail-oriented IT professional with strong customer service skills and a solid understanding of modern technology systems. The Help Desk Engineer will play a key role in supporting daily technical operations, contributing to project implementations, and ensuring timely resolution of service requests in alignment with SLAs. Key Responsibilities: • Manage and resolve support tickets efficiently, ensuring adherence to service level agreements., • Provide technical assistance via phone, email, and ticketing systems; respond to inbound IVR calls as needed., • Support and participate in customer-facing projects including system deployments, upgrades, and migrations., • Troubleshoot and maintain the following systems:, • Access Control Systems (on-premises and cloud-based): iPro, Verkada, • Video Surveillance Systems: iPro, Verkada, Hanwha, Brivo, Eagle Eye, • VoIP Phone Systems: Mitel, Zoom, Avaya (on-premises and cloud-based), • Data Networking: Switches, routers, and structured cabling, • Wireless Networking: Secure wireless configuration and troubleshooting, • Paging, Bell, and Clock Controllers: Installation, maintenance, and support, • Firewall & Network Security: Configuration and support of perimeter security appliances, • Collaborate with internal teams to escalate and resolve complex technical issues., • Exposure to a wide range of technologies across security, telecom, and networking, • A collaborative and growth-oriented work environment, • Opportunities to work on impactful projects in education and public safety sectors

Job Description Overview PTI Tech is a leader in precision injection molding, specializing in both metal (MIM) and polymer components for mission-critical applications in aerospace, defense, medical, and industrial sectors. With over 36 years of innovation and excellence, we pride ourselves on delivering high-performance solutions that meet the most stringent industry standards. We are seeking a Junior Sales Engineer to join our dynamic team. This role plays a key part in supporting the quoting and sales process—interpreting technical drawings, developing accurate quotes, and ensuring smooth internal handoff if a project is awarded. The ideal candidate will work closely with Sales, Engineering, and Operations to align client needs with our capabilities. In addition to standard quoting, this role requires occasional ownership of more complex government proposal submissions. When those opportunities arise, the Junior Sales Engineer is expected to take the lead in preparing and submitting complete and compliant packages. Proficiency with AI tools to streamline quoting, documentation, and proposal development is essential. This is a growth-oriented role with multiple potential paths into engineering, sales, or operations. The expectation is to spend 3–5 years in this position while gaining exposure to different areas of the business. Roles & Responsibilities • Quote & Proposal Support, • Manage incoming RFQs and generate accurate, timely quotes in coordination with Sales, Engineering, and Operations., • Interpret technical drawings (including GD&T) and specs to support cost estimation and manufacturability reviews., • Understand various manufacturing methods (e.g., injection molding, additive manufacturing, MIM, machining) to recommend best-fit approaches., • Format and prepare professional, client-facing proposal documents, • Sales Process Support, • Maintain organized quote tracking in CRM and internal systems, ensuring accuracy of part numbers, customer names, and status., • Follow up on outstanding quotes, gather feedback, and assist the sales team in advancing opportunities., • USG Proposal Ownership, • Own the process for more complex government or military proposal submissions as needed., • Use AI tools to support writing, formatting, compliance checking, and document compilation., • AI-Enabled Efficiency, • Leverage AI tools to accelerate quoting, extract data from technical files, and improve proposal quality, • Contribute ideas for improving sales and proposal workflows through digital tools and automation., • Cross-Functional Collaboration & Project Handoff, • Coordinate with Engineering, Tooling, Production, and Quality teams to ensure quoting assumptions are feasible., • Assist in the transition of awarded jobs into production by communicating quote assumptions and technical requirements., • Technical Literacy – Reads and interprets technical drawings (incl. GD&T) and understands core manufacturing methods including injection molding, additive manufacturing, machining, and MIM., • Quote Development Accuracy – Consistently produces technically and commercially accurate quotes., • AI Tool Proficiency – Uses AI to improve productivity, quoting speed, and proposal quality., • Communication Skills – Clearly articulates information across teams and to clients., • Sales Process Support – Understands how to manage and move opportunities through the quoting pipeline., • Client Focus – Maintains professionalism, responsiveness, and a solution-oriented approach., • Organizational Skills – Manages multiple tasks, RFQs, and proposals in a timely, accurate manner, • Cross-Functional Collaboration – Coordinates well across departments to align internal and client needs., • Problem Solving – Identifies and resolves issues in RFQs or specs during the quoting process., • Quote Turnaround Time – 90% of standard quotes delivered within 3 business days, • Quote Accuracy Rate – 95% of submitted quotes require no major rework, • Proposal Completion Rate (USG/Complex Projects) – 100% of assigned proposals submitted on time, • CRM & Quote Log Consistency – 100% of quotes logged and updated within 1 business day, • Handoff Completeness Score – 90% of awarded quotes transitioned with full documentation to production, • B.S. in Mechanical, Industrial, or Manufacturing Engineering preferred, • 1–2 years of relevant experience (internships, co-op, or full-time), • Comfortable reading engineering drawings, including GD&T, • Exposure to or interest in injection molding, additive manufacturing, machining, or metalworking processes, • Familiarity with ERP systems and CRM tools a plus, • Strong attention to detail, time management, and follow-through, • Interest in leveraging AI tools to improve productivity, • Strong communication and client-facing demeanorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionSummaryOur client is a leading IT Solutions Company located in Roseland, NJ and they are in need of a Level II IT Help Desk Support. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a client’s business needs. Duties & Responsibilities • Work with sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 3 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • 3 years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • Having worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Job DescriptionSummaryOur client is a leading IT Solutions Company located in Roseland, NJand they are in need of a Level II IT Help Desk Support. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a clients business needs. Duties & Responsibilities • Workwith sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 3 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • 3 years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus, • Having worked in an MSP environment is a major plus.Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Roseland, NJ

Serve as the bridge between industrial engineering, factory engineering teams, quality, and IT on AI/ML initiatives. The AI/ML Transformation Architect will be the pivotal role in shaping ZT’s future-state vision for AI & ML by identifying high-impact use cases, preparing the organization structur

Technology that supports the buildings and industry of today and tomorrow requires a wide range of talents and skill sets. This position is for a professional with deep knowledge and highly developed technical expertise in Project Management, who develops project plans and budgets. Manage projects f

PuroClean, a leader in emergency property restoration services, helps families and businesses overcome the devastating setbacks caused by water, fire, mold, biohazard, and other conditions resulting in property damage.We operate with a 'servant-based leadership' mindset and seek to create an environ