Trabajos technical support engineer en Wayne, New JerseyCrear alertas

If you enjoy variety, we will put your time-management and organization skills to use handling field visits, office work, and projects for large commercial clients. We will provide you with extensive training to understand our business, build relationships with mentors, and learn FM's best-in-class industry standards. In this role, you will work independently with a lifeline of 200 years of support and experience. Initially, your assignments are structured for you to learn. You will gradually begin assessing risks at larger commercial properties. You will visit client facilities and perform evaluations that will help our clients reduce risks in their business and at their properties. You will perform “hands-on” site assessments of physical properties including roofs and conduct evaluations which include, but are not limited to, site water supplies, dust hazards, chemical storage, and rack storage arrangements of client products. Consultant Engineers are encouraged to follow FM Engineering Standards and communicate recommendations and/or engineering solutions to ensure client understanding. Strong communication, listening and relationship building skills are a must. You should be willing to operate from a home office and will travel to clients' facilities daily; overnight travel is expected approximately 30% of the time. You must also be willing to travel to Natural Catastrophe sites as needed. Based on a candidate’s previous experience, this role can be for either a Consultant Engineer I or Consultant Engineer II. Successful Consultant Engineer candidates have the following qualifications: * Bachelor's degree in engineering or fire protection * Strong verbal and written communications skills * Good analytical, organizational, problem solving skills * Efficient time management ability with work independently * Proven technical capability including diverse knowledge of engineering principles * Valid driver’s license * Physical ability to climb commercial ladders (ex. inspect roofs), lift >25 lbs., and some clients require working in confined spaces. * Proficient in MS Office products You will be expected to work independently and should be willing to operate from your home office and travel to client sites on a regular basis. The position is eligible to participate in FM’s comprehensive Total Rewards program that includes an incentive plan, generous health and well-being programs, a 401(k) and pension plan, career development opportunities, tuition reimbursement, flexible work, time off allowances and much more. FM is an Equal Opportunity Employer and is committed to attracting, developing and retaining a diverse workforce.

Job DescriptionDescription: VMC Group is seeking a versatile and detail-oriented Quality Control Auditor to support both field and in-house quality functions. This role is responsible for conducting audits, managing quality documentation, inspecting products and installations, and ensuring compliance with ISO standards. The ideal candidate will be experienced in manufacturing environments, field inspections, and quality systems management. Responsibilities not limited to: 1. Inspection & Auditing • Perform on-site inspections of manufacturing processes, products, and field installations (in-house and customer locations)., • Conduct ISO 9001 internal audits as directed by the Manufacturing Engineer., • Conduct dimensional checks on in-process products using inspection tools., • Identify and document quality issues, non-conformances, and initiate rework procedures., • Ensure compliance with building codes, engineering drawings, and manufacturing standards. 2. Quality Records Management • Maintain and organize Certificates of Conformance (C of C) for critical incoming materials such as steel and rubber., • Manage calibration records to ensure all required equipment is current and accurate., • Process and control RMA (Return Material Authorization) materials., • Document all inspections, audits, and non-conformance reports in compliance with ISO standards. 3. Training • Deliver Quality System training for new employees (shop floor and office staff)., • Translate work instructions and training documents into Spanish as needed. 4. Additional Duties • Serve as back-up to the Shipping Clerk when required., • Support internal and external quality improvement initiatives. Requirements: • High School diploma required; technical certification or equivalent experience preferred., • Proven experience in ISO 9001:2008/2015 environments., • Background in building inspection and manufacturing required., • Bilingual (English/Spanish) preferred., • Completion of an ISO internal auditor course., • Ability to read and interpret technical drawings and blueprints., • Proficient in using calipers, height gauges, thread gauges, and other inspection tools., • Knowledge of calibration procedures and systems., • Strong attention to detail, organizational, and communication skills., • Ability to lift to 25 pounds., • Able to sit or stand for extended periods while using a computer or performing inspections., • Ability to work additional hours as needed., • Combination of office, manufacturing floor, and field environments. At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals

Job Description VMC Group is seeking a versatile and detail-oriented Quality Control Auditor to support both field and in-house quality functions. This role is responsible for conducting audits, managing quality documentation, inspecting products and installations, and ensuring compliance with ISO standards. The ideal candidate will be experienced in manufacturing environments, field inspections, and quality systems management. Responsibilities not limited to: 1. Inspection & Auditing • Perform on-site inspections of manufacturing processes, products, and field installations (in-house and customer locations)., • Conduct ISO 9001 internal audits as directed by the Manufacturing Engineer., • Conduct dimensional checks on in-process products using inspection tools., • Identify and document quality issues, non-conformances, and initiate rework procedures., • Ensure compliance with building codes, engineering drawings, and manufacturing standards. 2. Quality Records Management • Maintain and organize Certificates of Conformance (C of C) for critical incoming materials such as steel and rubber., • Manage calibration records to ensure all required equipment is current and accurate., • Process and control RMA (Return Material Authorization) materials., • Document all inspections, audits, and non-conformance reports in compliance with ISO standards. 3. Training • Deliver Quality System training for new employees (shop floor and office staff)., • Translate work instructions and training documents into Spanish as needed. 4. Additional Duties • Serve as back-up to the Shipping Clerk when required., • Support internal and external quality improvement initiatives. Requirements • High School diploma required; technical certification or equivalent experience preferred., • Proven experience in ISO 9001:2008/2015 environments., • Background in building inspection and manufacturing required., • Bilingual (English/Spanish) preferred., • Completion of an ISO internal auditor course., • Ability to read and interpret technical drawings and blueprints., • Proficient in using calipers, height gauges, thread gauges, and other inspection tools., • Knowledge of calibration procedures and systems., • Strong attention to detail, organizational, and communication skills., • Ability to lift to 25 pounds., • Able to sit or stand for extended periods while using a computer or performing inspections., • Ability to work additional hours as needed., • Combination of office, manufacturing floor, and field environments. At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals Our comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application. VMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity. We call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders. The VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.For over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products.\r\n\r\nOur comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application.\r\n\r\nVMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity.\r\n\r\nWe call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders.\r\n\r\nThe VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.

Every great civil engineering role should combine technical mastery, project management leadership, and meaningful client engagement — and this opportunity delivers exactly that. This Senior Site/Civil Project Engineer position is ideal for a PE-licensed Civil Engineer who thrives on managing the full project lifecycle. You’ll oversee land development projects across residential, commercial, institutional, and mixed-use markets — guiding everything from concept to construction. We promise a dynamic, respected environment where your project management skills will shine. You’ll lead multidisciplinary teams, coordinate permitting, and ensure deadlines and budgets align seamlessly. You’ll also collaborate with firm leadership on proposals, client strategy, and mentoring — combining delivery with development. What You’ll Do: • Lead land development and site/civil design projects across New York., • Manage grading, drainage, stormwater management, and permitting., • Deliver hydrologic/hydraulic analyses and SWPPPs., • Coordinate geotechnical and environmental design inputs., • Mentor junior engineers and support client growth strategies. If you have 10+ years of site/civil engineering experience and a proven record in project management, this is your chance to shape high-profile projects and your own career trajectory. 👉 Apply today and take the lead in building what’s next.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. Applies engineering or applicable education and participates in civil, geotechnical, and environmental projects such as construction of buildings, dams, roadways, and other types of construction to expand industry skills and knowledge. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Assists in the conduct of civil, environmental, and geotechnical engineering related services, • Performs tasks to make Staff Engineer/Associates more efficient, • Assists with inspection of compacted fills, utilities, asphalt, concrete, sitework elements, • Experiments with new growth strategies and ideas to develop technical skills, • Conducts geotechnical engineering laboratory tests, • Prepares samples of materials for laboratory testing, • Performs research and data entry, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Must have strong attention to detail with excellent analytical and willing to spend the majority of work hours in the field., • BS in Civil Engineering or related field with a Minimum cumulative GPA 3.0., • Excellent written and verbal communication skills., • Valid Driver's License and possess reliable transportation to access job sites., • Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Able to apply concepts of basic algebra and geometry., • Proficient or familiarity with AutoCAD, NitroPro, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Hourly Rate: $17/hr. -$21/hr., + overtime & mileage reimbursement.

Job Title: Geotechnical Project Engineer - Design Focused (Remote) Location: Fully Remote (U.S.-based candidates) Employment Type: Full-Time Overview: A dynamic and growing engineering consultancy is seeking a Geotechnical Project Engineer to support design-driven geotechnical projects across a variety of sectors. This fully remote role is ideal for a technically strong engineer who enjoys working independently and collaboratively on complex design challenges. The position offers flexibility, autonomy, and the opportunity to contribute to high-impact infrastructure and development projects nationwide. Key Responsibilities: • Perform geotechnical design and analysis for foundations, retaining structures, slope stability, and ground improvement., • Develop geotechnical reports, design calculations, and construction recommendations., • Collaborate with multidisciplinary teams including structural, civil, and environmental engineers., • Review subsurface investigation data and interpret geotechnical parameters for design., • Support project managers with technical input and coordination across project phases., • Bachelor's or Master's degree in Civil or Geotechnical Engineering., • 4+ years of geotechnical engineering experience with a strong design portfolio., • PE license or EIT working toward licensure., • Proficiency in geotechnical software (e.g., LPILE, Slope/W, PLAXIS, gINT)., • Strong written and verbal communication skills., • Competitive compensation and benefits., • Fully remote work with flexible hours., • Opportunity to work on diverse and technically challenging projects., • Supportive and collaborative team culture., • Professional development and growth opportunities.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionWho We Are: At Sectigo, we align around our mission and pride ourselves in helping thousands of customers sleep better at night. Sectigo is a leading provider of digital identity and cybersecurity solutions, offering a comprehensive suite of products to protect online transactions and communications. Our mission is to secure the digital landscape for enterprises worldwide. “When people think Online trust management, they think Sectigo because we offer our customers unparalleled peace of mind.” How we show up with each other and our customers every day is just as important, and we win as #OneSectigo by living out our core values - Support, Excellence, Collaboration, Teamwork, Integrity, Growth and Openness. We are committed to investing in our diverse teams where everyone understands their role and how they support our strategic goals, we drive operational excellence through scale and efficiency, and we strive to delight our customers and become the market leader in our industry. If you aspire to join a driven team that holds each other accountable to meeting our lofty goals and you’d like to be part of our growth story in delivering a market leading user experience, we’d like to talk to you. What We Are Looking For: Our Sales Engineers take ownership as being the technical prime to articulate the technical value and fit for our customers and prospects. We are looking for a Sales Engineer who possesses exceptional technical, presentation, and communications skills that takes our customers and prospects through the pre-sales stages, which encompasses a technical presentation of our product and service offerings, an assessment and understanding of our customers’ and prospects’ existing IT infrastructure to ensure optimal understanding of potential use cases, and an overall guidance through a proof of concept. At Sectigo, our Sales Engineers are the technical bridge and a liaison among various stakeholders, such as our sales team, channel partners, customers, prospects, etc. This is a full-time and remote position, ideally based in the BosWash region of the U.S. What You’ll Be Doing: • Assist mid-market and enterprise sales teams with customer management and customer expectations throughout the sales process., • Conduct technical presentations and demos for prospects, channel partners that is tailored to the audience whether they are engineers and/or executives., • Provide Proof of Concept service to customers/prospects, assist clients with planning and implementation of Sectigo solutions., • Provide training to new/existing channel partners along with responding to incoming technical inquiries., • Work in a fast-paced environment under minimal supervision., • Assist with sales proposals and RFPs/RFIs., • Contribute to building/improving the SE Readiness Program such as: Develop subject matter expertise in assigned products/solutions; share best practices with the team to enhance quality of service and efficiency; maintain and expand working knowledge of current and future products; and provide product training and mentoring when required., • Willing to travel regionally for customers facing activities, as well as marketing, user group events, and conferences., • Channel feature requests to Product Management to enhance Sectigo products., • Participate in alliance projects including building vendors’ and customers’ relationships., • Additional responsibilities and special projects as assigned., • Other duties as assigned and related to the nature of this role and company initiatives. Requirements: Education • Bachelor’s degree in computer science or engineering from an accredited college, or equivalent work experience is strongly recommended., • MCP – Microsoft Certified Professional (considered an asset)., • Linux/Solaris/UNIX System Administration (considered an asset)., • Minimum 5+ years of industry experience with a minimum of 1-2 within a pre-sales environment is required., • Current or prior Sales Engineering and/or professional services experience is strongly preferred., • Experience working with various Microsoft software and systems, specifically Active Directory, Windows platforms servers and clients., • Experience working with Linux platforms., • Experience with Public Key Infrastructure (PKI), SSL, X509 (considered an asset)., • Experience with webservers & firewall/load balancers software/platforms (considered an asset)., • Experience with Public Cloud (Azure, GCP, AWS) (considered an asset)., • Must be able to travel more than 35% of the time to the assigned regions and/or territories. Talents and Desired Qualifications:, • Demonstrated strong verbal and written communication skills, excellent customer service and account management, and ability to interface with a diverse set of clients including administrators and C-level executives., • Software as a Service (SaaS) technical solutions selling., • Solid multi-tasking, troubleshooting and problem resolution abilities., • Self-starter with a can-do/will-do attitude, quick leaner, willingness to work as part of a team, and a desire to continually learn new tools/technologies., • English language proficiency required., • Willingness to travel up to 50% of the time if required.

Job DescriptionOur firm is seeking an Environmental Engineer to join our Northern New Jersey office. The job will consist of a variety of tasks, but candidates can expect to perform soil and groundwater sampling, field inspections and design of solid waste facilities. Will also be providing modeling services, subcontractor oversight and project coordination. We require a self-motivated growth seeker who is effective at combining creative thinking with logical design ideas to develop solutions to challenging environmental problems. Requirements: • Bachelor’s degree in environmental engineering., • Trained in OSHA 40 Hour HAZWOPER preferred., • E.I.T. preferred., • Strong knowledge of Microsoft Office software (Word, Excel, Outlook)., • Experience with solid waste projects and knowledge of state and federal regulations is a plus., • Strong technical and problem-solving skills including attention to detail, accuracy, and completeness., • Possess an energetic and professional demeanor., • Interaction with clients and regulatory agencies., • Strong verbal and written communication skills., • Strong analytical and judgment capabilities., • Field work as required., • Ability and willingness to travel to various client sites., • Own vehicle with a valid driver's license.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $60,000 - $70,000 Powered by JazzHR KhZsZf4pLM

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description ELLKAY started out providing connectivity solutions to laboratories and within a few years, grew to also provide data management solutions to ambulatory organizations. ELLKAY is now a trusted data management partner in five healthcare segments. ELLKAY’s solutions continue to serve laboratories and ambulatory practices and have expanded to empower hospitals and health systems, healthcare IT vendors, ambulatory practices, health plans, and other healthcare organizations with cutting-edge technologies and solutions that drive their growth and interoperability strategies. Today, ELLKAY remains true to our core values, building strong partner relationships and offering unparalleled service and support while providing innovative, scalable solutions to the challenges our customers face in today’s data-rich world. ELLKAY's experience, customer-focused approach, and reputation for innovation, speed, and accuracy differentiate ELLKAY as a premier partner for your interoperability needs and data management strategy. Job Description: ELLKAY is seeking a Senior Software Engineer to play a crucial role in advancing our core healthcare IT systems through the development of scalable and secure software solutions. As a senior individual contributor, this position involves working closely with other engineering team leaders to architect robust backend systems, guide technical direction, and enhance software delivery processes. Essential Duties & Responsibilities: * Take a technical leadership role in building and scaling national-scale healthcare data exchange systems * Deliver extremely reliable, scalable, and observable software capable of supporting massive transaction volumes * Lead architecture and implementation of highly scalable, API-driven systems powering healthcare data exchange at scale * Provide practical, balanced technical guidance—considering both engineering best practices and business priorities * Guide design decisions on fault tolerance, throughput optimization, and system resilience * Contribute to CI/CD pipeline improvements to maintain quality while accelerating delivery * Collaborate with product and implementation teams to shape technical execution * Document technical designs, workflows, and release notes for cross-team and customer consumption * Participate in and lead design and code reviews * Mentor engineers through pairing, design discussions, and pull request feedback Qualifications: * 10+ years of software engineering experience, with a focus on building large-scale, high-throughput distributed systems * Have a balanced, pragmatic approach—able to apply the right level of engineering rigor to meet business needs * Experience designing and scaling API-driven systems with extreme reliability and throughput requirements * Experience with event-driven, queue-backed, and asynchronous processing architectures * Skilled in observability practices including distributed tracing, metrics, and log aggregation * Strong background in Microsoft SQL Server and experience optimizing relational data access * Familiar with other database technologies (NoSQL, distributed databases) * Deep experience with the .NET ecosystem, with exposure to other technical stacks as a plus * Familiar with containerization, cloud-native architectures, and Kubernetes deployment patterns * Strong architectural skills with a focus on reliability, scalability, and performance * Proven ability to lead architecture across multiple systems and teams * Experience writing and optimizing parallel and asynchronous code * Strong knowledge of IHE profiles, FHIR, and other healthcare data exchange standards is a significant plus * Front-end development experience with modern JavaScript/TypeScript frameworks is a plus but not required * Bachelor’s degree or equivalent experience in a technical field Benefits: ELLKAY offers a comprehensive and competitive benefit package that starts day one! Including: • Medical, Dental, and Vision benefits, • Employer-paid Life and LTD, • 401k w/ matching – once eligibility is met, • Work/life balance, • Paid Volunteer Program, • Flexible working hours, • Unlimited PTO, • Remote work options, • Employee Discounts, • Working with talented, collaborative, and friendly people who love what they do, • Professional growth within, • Innovation environment At ELLKAY, we are committed to operating as a hybrid workplace, offering employees flexibility in how they structure their time between in-office and remote work. We recognize the significance of fostering connections, collaboration, and creativity within our office culture and its positive impact on our business. Our philosophy of operating as a hybrid workplace underscores our dedication to enabling employees to tailor work-life balance to their individual preferences. For those who do not live within 40 miles of one of our offices, we are open to considering remote work for candidates whose skills and experience strongly align with the role. While we prioritize a hybrid work environment for most roles, we understand the importance of flexibility and are open to remote work for specific positions and specialized skill sets. For more information on our company, visit . ELLKAY LLC is a Smoke-Free Workplace. ELLKAY, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. What You'll Do: CoreWeave is seeking a Security Engineer to spearhead the design, development, and upkeep of our rapidly expanding Physical Security network and its underlying infrastructure. This position is perfectly suited for an individual with extensive knowledge in access control and camera security systems, as well as their supporting infrastructure. If you have strong networking skills, a solid understanding of Genetec Security Center or enterprise physical security systems, Azure or GCP, and experience integrating third-party systems, we want to hear from you. Strong organizational skills, technical writing abilities, and system administration expertise are essential. We are also looking for a collaborative team player who approaches security with a customer-first mindset. This position requires up to 10% travel, including international travel for on-site security projects and training. Additionally, there will be times when the candidate must be available outside of regular business hours to support critical issues or meetings. You will report to the Manager for Data Center Security Engineering and work from our Security Fusion Center in Livingston, NJ. About the Role: • Oversee CoreWeave's comprehensive physical security system engineering infrastructure, including video surveillance, access control, visitor management, intrusion detection, and intercom infrastructure in support of our Global Security Operations Center., • Monitor system health and perform checks to ensure the integrity of hardware, server resources, and peripheral security systems., • Serve as a main point of contact for new system uplift and ensure existing system resiliency (24/7/365), including on-call responsibilities., • Manage lifecycle of currently deployed hardware components and associated licensing., • Configure and harden CoreWeave's hardware and software infrastructure for security operations aligned with published standards and/or best practices., • Manage third-party integrations with the Physical Security infrastructure systems., • Serve as an escalation point for internal users, providing support and training for access, credential, or security hardware and software issues, • Maintain precise documentation for troubleshooting, operations, and standard procedures; Uphold high-quality standards and meet strict deadlines., • Develop, own, and meticulously maintain a comprehensive library of system documentation, including architectural diagrams, standard operating procedures, disaster recovery/business continuity plans, and troubleshooting playbooks., • Adhere to and refine change management processes, ensuring all modifications to systems are documented, tested, and approved., • Maintain an inventory of all physical security hardware, software licenses, and service contracts, actively tracking renewal dates and contributing to annual budget forecasting for maintenance and upgrades., • Lead the technical root cause analysis for any system outages or significant performance degradation, documenting findings and implementing corrective actions to prevent recurrence., • Stay current with industry best practices through workshops, networking and tradeshows, • Work independently, demonstrating attention to detail and follow-throughWho You Are:, • Strong expertise in the Genetec Security Center suite, including the Directory, Archiver, and Synergis roles, failover configurations, and API/SDK integrations., • Strong knowledge of networking essentials, TCP/IP protocols, routing, and troubleshooting, • Understanding of SQL databases, including integrity management and troubleshooting, • Deploying and Maintaining Windows Server environments, • Experience integrating systems and deploying field solutions with vendors, • Bachelors degree in Computer Science, IT, Engineering or similar, • Strong written and verbal communication, • Skilled at explaining technical concepts to non-technical audiences, • Certifications: GSEC, Security+, Network+, CCNA, CISSP or similar certifications, • Manufacturer Certifications: Genetec, Axis, Bosch, or similar, • Experience engineering for a Physical Security Operations Center (SOC), • Experience managing physical security or IT-related projects, • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $165,000 to $242,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. What You'll Do: We are seeking a highly skilled and experienced Senior Data Center Electrical Engineer to play a key role in the design and delivery of electrical infrastructure for our data center facilities. This individual will be responsible for leading technical design efforts, reviewing consultant work, and ensuring that our electrical systems meet the highest standards of performance, efficiency, and scalability. Travel is required to visit various data center sites. About the role: • Execute electrical engineering design tasks for new data center facilities, including build-to-suit, self-performed, and tenant fit-out projects., • Develop electrical design solutions that enhance speed of deployment, scalability, and repeatability for hyperscale data center sites., • Contribute innovative design concepts and technical approaches to improve efficiency, reliability, and constructability., • Support whitespace fit-outs by developing electrical layouts, validating load capacities, coordinating with IT/operations, and ensuring compliance with company standards., • Participate in new site due diligence, including evaluation of utility availability, site power constraints, and electrical infrastructure readiness., • Review electrical striping plans to verify that loads are properly distributed upstream, ensuring balanced operation under normal and failover conditions., • Review design drawings, specifications, and shop drawings prepared by consultants and contractors to ensure compliance with Basis of Design and company standards., • Coordinate closely with third-party consultants, vendors, and internal project teams (IT, operations, mechanical, and project management) to ensure complete and cohesive designs., • Perform technical calculations and studies (short-circuit, coordination, arc-flash, load flow, etc.) to validate system performance and safety., • Ensure compliance with industry codes, standards, regulations, and safety protocols throughout the design and construction process., • Participate in factory witness testing, site inspections, and commissioning activities to verify proper installation and operation of electrical systems., • Provide technical input on budgets, schedules, and resource planning in support of project execution., • Support troubleshooting and corrective action efforts related to electrical design and implementation., • Bachelor's degree in Electrical Engineering. Professional Engineering license preferred., • 7+ years of experience in data center engineering., • Proven track record of successfully completing data center design projects., • Strong knowledge of data center electrical systems, such as Substations, Emergency Generators, Uninterruptible Power Systems (UPS), Lithium-Ion Battery Plants and Fire Alarm., • Be familiar with Emergency Power Monitoring Systems (EPMS) and/or Supervisory Control and Data Acquisition (SCADA) Systems with the ability to develop controls sequences and monitoring protocols., • Experience with large-scale, high-density data centers and cloud infrastructure., • Excellent communication and project management skills., • Ability to work effectively in a fast-paced, dynamic environment., • Strong problem-solving and analytical skills., • Professional certifications (e.g., Uptime Institute, BICSI, or similar) are a plus. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $122,000 to $179,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. What You'll Do As a Staff Engineer in Incident Response, you'll be part of a critical team dedicated to maintaining the trust, reliability, and security of CoreWeave's innovative platform. Your proactive approach and analytical skills will directly influence how we respond to and learn from security incidents. • Lead incident investigations, swiftly analyzing threats and coordinating effective responses to security incidents, • Develop and refine incident response playbooks, procedures, and tools to strengthen our security posture, • Collaborate closely with cross-functional stakeholders, including engineering, security, infrastructure, and leadership teams, during security events through the completion of the cyber kill-chain, • Lead post incident reviews and perform detailed root-cause analysis after incidents and implement lessons learned to enhance proactive security measures, • Continuously improve our detection and response capabilities to minimize risks and response times Who You Are Minimum Qualifications • At least 5 years of experience in incident response, security engineering, or related roles., • Proven capability in managing high-pressure security incidents effectively., • Deep technical expertise in incident handling frameworks, methodologies, and tools. The base salary range for this role is $206,000 to $275,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Utility Engineer to join our team. As a Senior Utility Engineer, you will be responsible for supporting the planning, design, and preparation of contract documents for the construction of stormwater and utility infrastructure. Responsibilities: • Manage utility aspects of projects, oversee design and production of plans and specifications, and ensure that the work is produced on schedule profitably., • Collaborate with project teams to analyze utility relocation conflicts on infrastructure projects., • Review and provide feedback on Utility Owner design submittals., • Coordinate utility design efforts with consultants and stakeholders., • Perform constructability reviews to ensure compatibility with construction methods., • Analyze projects and direct ASCE SUE investigations., • Compile and compute a variety of engineering data., • Prepare plans, and details and develop engineering drawings, specifications, and other project deliverables., • Support and participate in the development and mentorship of staff. Qualifications: • Bachelor’s degree in civil engineering or related field., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • Must have a minimum of 5 years of experience in project engineering design., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • MS Office proficiency., • Experienced with ASCE standard governance of subsurface utility engineering., • Experience with different construction techniques and constructability of utilities and associated civil aspects in design-build projects., • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites., • Work productively and meet deadlines timely., • Ability to independently manage small to medium size projects.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 - $120,000 Powered by JazzHR hKcnA0Vo1S

Job DescriptionPLC Mechanical Automation Engineer PLC Mechanical Automation Engineer Position Overview We are seeking a skilled PLC Mechanical Automation Engineer to design, develop, and implement automation solutions that enhance production efficiency and reliability. The ideal candidate will have a strong background in HMI design and experience with various automation systems, ensuring seamless integration of mechanical and electrical components. Key Responsibilities • Design and develop HMI interfaces for automation systems, • Collaborate with cross-functional teams to integrate mechanical and electrical systems, • Troubleshoot and resolve issues in automation systems and processes, • Implement control systems and robotics solutions to improve operational efficiency, • Conduct testing and validation of automation solutions to ensure functionality and performance, • Provide technical support and training to end-users on automation systems, • Document project specifications, design changes, and maintenance proceduresQualifications, • Bachelor's degree in Mechanical Engineering, Automation Engineering, Electrical Engineering, or a related field, • Proven experience in HMI design and development, • Knowledge of automation systems and control systems, • Familiarity with robotics and electrical engineering concepts, • Strong troubleshooting skills and experience with SCADA systems, • Understanding of industrial engineering principles and process control, • Excellent communication and teamwork skills Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life - Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/14/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionAbout our Company:Based in Denver, Colorado, Cologix is North America's leading network-neutral interconnection and hyperscale edge data center company. Our platform gives customers access to 45+ digital edge and ScalelogixSM hyperscale edge data centers in 12 markets across the United States and Canada along with a carrier-dense ecosystem of 710+ networks, 360+ cloud providers, 30+ onramps and seven Internet exchanges. We provide our nearly 2,000 customers with direct access to our local operations teams, resulting in strong partnerships enabled by exceptional operational support and unparalleled customer service. Backed by one of the largest North American infrastructure funds, Cologix's experienced leadership team, certified staff and commitment to ESG initiatives help form a culture that values our people, our environment and our clients. About the Position:The Senior Director, Engineering is primarily responsible for leading and managing the engineering efforts to support the Design and Construction Team in delivering innovative, high-quality, and efficient data center projects, especially related to future industry trends to ensure Cologix remains at the forefront of data center development. This role involves overseeing the technical aspects of all projects in design, ensuring alignment with company standards, client expectations, and industry best practices, as well as maintaining the company standards with an understanding it is a living document that continuously evolves to meet the future expectations of the market. What you do daily: • Provide expert technical engineering guidance for data center projects, ensuring compliance with building codes, safety regulations, and industry standards., • Serve as a primary point of contact for consulting engineers and direction, ensuring engineering designs align with Cologix’s best practices, customer expectations, contract requirements, project budgets, and operational requirements., • Regularly review and update all engineering basis of design documents to ensure designs meet the project schedule, budget and operational needs., • Conduct ongoing audits and enhancements of Cologix’s design and build standards to drive innovation in data center design, including liquid cooling, sustainability, and on-site generation alternatives., • Continually assess and update owner furnished equipment specifications for relevance to current and future designs, constructability, and coordination with all controls systems., • Interface with the supply chain group to ensure alignment with equipment designs, availability, and cost., • Work directly the internal Cologix DCIM, IT, and security teams to ensure alignment with all design standards and consulting engineering design documents., • Regular interface with the project construction and operations teams to continually assess design and equipment adequacy related to builds, constructability, schedule, cost, and maintenance., • Develop and implement company training plans related to the dissemination of key engineering elements that affect sales and operations, such as liquid to chip cooling processes, noise abatement approach to high decibel servers, etc., • Recruit, train, and provide technical leadership to internal engineering personnel. Assign tasks to align with staff abilities and project needs, fostering professional development and skill enhancement., • Oversee engineering group capital costs (hours and expenses) to align with annual budgets, manage personnel resources, and optimize overhead utilization while scaling the team to support project workloads., • Work with the development team to prepare consultant design budgets for new projects, and maintain existing consultant design budgets on projects in design., • Support the energy strategy group in technical discussions with utility companies when assessing existing and future utility service strategies and agreements., • Support the business strategy group in performing due diligence for prospective opportunities as well as developing scopes of work for third party consultants in performing due diligence where required., • Collaborate with internal and external teams to enhance processes and protocols, ensuring Cologix remains an industry leader in multi-tenant and hyperscale colocation data center design and construction., • Develop data-driven designs and equipment specifications to mitigate project risks through innovative planning and partnerships, presenting information to support executive decision-making., • Review project documents for quality and consistency throughout the design process, from conceptual design through IFC documents., • Conduct site walks as needed during construction to ensure designs meet specifications, and support RFI responses between design teams and internal management where required., • Work closely with the commissioning team to ensure vendors and contractors are aligned with the design documents in order to achieve successful project turnover to customers.What Makes You a Good Fit:, • Minimum of 15 years of experience in electrical and mechanical engineering, with at least 5 years in a leadership role within the data center or mission-critical industry., • Licensed Professional Engineer (PE) in a relevant discipline (e.g., Mechanical or Electrical) in a U.S. state is preferred but not required., • Bachelor’s degree in Engineering, Construction Management or a related field. A master’s degree in a related field is advantageous but not required., • Extensive experience in design-assist and design-build construction, particularly in data center projects, with a strong understanding of preconstruction planning, construction oversight, and commissioning processes., • Expertise to focus on MEP disciplines, as well as a working knowledge of low voltage BMS, EPMS, IT, security, and life safety systems. Knowledge of typical data center civil an structural disciplines a plus., • Understanding of utility service requirements, points of demarcation and responsibilities required. Knowledge of substation design, procurement, and construction a plus., • In depth knowledge of data center QAQC and commissioning processes., • Proven ability to lead and manage a team of engineers, fostering a collaborative and innovative environment., • Excellent communication, problem-solving, and organizational skills, with the ability to engage with corporate executives, external partners, and cross-functional teams., • Collaborative nature with the ability to be the decision maker when needed. Regularly source alternate opinions with the ability to assess the critical factors that best represent the company and stakeholder requirements., • Strong knowledge of building codes, safety regulations, and industry-specific standards., • Proficiency in engineering design software, construction management tools, cloud-based commissioning platforms, and financial management software.

Summary We are looking for a Site Civil Engineer to support the planning, designing, and management of various land development projects. This position offers a combination of design and on-site field activities. Responsibilities: • Assist with engineering design plans, specifications, and cost estimates for site development (layout, grading, drainage, utilities)., • Use AutoCAD Civil 3D for technical drawings., • Conduct site inspections to monitor construction progress and compliance with designs and safety standards., • Perform engineering calculations for grading, storm sewer sizing, and stormwater management using software like HydroCAD and Civil 3D., • Review local regulations to ensure compliance in designs and permit applications., • Collaborate with senior engineers, project managers, and contractors to resolve issues., • Assist in writing technical documents and maintain project records. Requirements • Bachelor's degree in Civil Engineering or related field., • Minimum 2 years of experience in civil engineering focused on site development., • EIT certification required with a path to a PE license., • Proficiency in AutoCAD Civil 3D., • HydroCAD experience is a plus., • Competent in Microsoft Office Suite.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Our flexible work environment, competitive compensation, and supportive culture have resulted in high employee satisfaction and retention and helped us win Best Places to Work awards three years in a row. Position Overview We are seeking a Staff Engineer I to join our growing engineering team. This is an entry-level professional role designed for recent graduates or those beginning their careers in engineering. The Staff Engineer I will develop foundational technical skills, apply prescribed techniques and procedures, and gain exposure to the engineering industry while contributing to a wide range of projects. Work assignments are routine, performed under close supervision, and aligned with established criteria. The role builds foundational engineering or design knowledge, gains industry exposure, and develops awareness of professional and ethical responsibilities. This position is ideal for a motivated individual looking to grow within a collaborative and supportive environment. Key Responsibilities • Data Collection: Gather project information, documentation, and field data to support engineering tasks., • Computations & Analysis: Perform standard engineering calculations and basic technical analysis under supervision., • Drawings & Documentation: Assist in preparing drawings, reports, and visual aids for project deliverables., • Field Observation: Observe construction activities and conduct basic environmental investigations., • Team Collaboration: Work closely with senior staff, following prescribed procedures and demonstrating initiative., • Minimal client contact; only as directed by the Account or Project Manager., • Regularly interacts with other staff., • Receives close supervision on all aspects of assignments., • Reports consistent with current organizational structure. Salary range: $70,000-$80,000 Requirements • Bachelor’s degree in Civil Engineering or a related field, • Ability to perform standard engineering computations, basic site plan support, and drawing preparation, • Familiarity with AutoCAD; willingness to learn Civil 3D and other design tools, • Proficiency with Microsoft Office (Word, Excel, Outlook), • Ability to perform field work and construction observation, • Valid driver’s license and ability to travel to project sites as needed, • Strong oral and written communication skills, • Hybrid/remote work flexibility, • 401(k) with company match, • 15 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance, • Training and development opportunities

Job DescriptionThe Role This critical Senior Project Engineer role will be the first hire of this kind in our newly created Data Center vertical. You will oversee the design and engineering of behind-the-meter (BTM), or off-grid microgrids, gas-fired power plants, and solar storage systems for hyperscale and colocation data centers. This is a hybrid role based out of our Ridgewood, NJ HQ, but could also be located at our NYC, LA, or Oakland, CA offices. This key role combines commercial leadership, strong technical skills, and a builder’s mindset. You will drive the expansion of our data center power solutions, build trusted partnerships, and ensure Scale remains at the forefront of decarbonized, resilient, and scalable energy infrastructure for mission-critical facilities.Key responsibilities will include: • Design and engineer power distribution systems for new data centers and retrofits, including electrical layouts, UPS (Uninterruptible Power Supply) systems, generators, PV, and BESS., • Utilize your strong technical and communication skills to interface with all aspects of the business and customers., • Work extensively with our execution (project management) team to deliver turn-key solutions for our customers within budget and per schedule., • Perform load analysis, short-circuit studies, and reliability assessments to ensure optimal performance of electrical systems., • Develop detailed power system specifications, schematics, and diagrams for data center projects. Optimize power system designs for maximum efficiency, scalability, and sustainability while minimizing operational costs., • Conduct risk assessments and reliability studies to identify potential points of failure and implement corrective actions to enhance system robustness. Develop and implement maintenance strategies and lifecycle management plans for power systems., • Work with the development, execution, and commercial teams on specific projects to ensure the integration of the Microgrid is technically correct, practical, and cost-effective. This includes working with existing service entrance one-line drawings or creating new ones, to provide the best design interface for functionality and cost., • Investigate the interconnection, which includes modifications to existing design concepts that are applicable to each site., • Work with switchgear manufacturers and other OEMs to develop innovative designs and costing that are scalable to many jobs and customer sites. This includes working at voltage levels of 23kV, 13.8kV, 4.16kV, 480V, and 208V, depending on site and system size., • Provide significant input to the solar, battery, and generator designs to optimize performance, reliability, and sustainability for each customer site., • Manage engineering consultants in the preparation of detailed engineering and construction drawings and specifications.The Ideal Candidate, • A minimum of 10+ years of experience in the design and construction of power/generation/renewable projects with a focus on data centers and/or other types of mission-critical facilities., • Thorough technical understanding of distributed energy technologies, including some combination of solar, battery, and reciprocating engines/turbines., • Deep understanding of rotating power with reciprocating engines in the 1MW to 20MW size range per engine. This includes parallel operation with the utility bus as well as with other DERs, both in grid parallel mode as well as island mode operations., • In-depth knowledge of power distribution systems, electrical codes, and industry standards (NEC, IEEE, IEC, etc.)., • Knowledge of the various DER power sources within the Microgrid and how they best interface with the utility to provide the most efficient system., • Knowledge of emissions from the utility side, as well as each of the DERs., • Knowledge of systems controls for all of the DERs and how they can be utilized to accomplish specific operating goals while part of the Microgrid. These goals provide economic return to us and the customer., • Experience in submitting interconnection applications, reviewing Utility studies which may include Detailed Studies, Facility Studies, and System Impact Studies., • Excellent communication skills, including the ability to communicate with technical and non-technical people to make projects work., • AutoCAD experience (for creating conceptual one-line diagrams and site layouts), • Professional Engineer’s License - Electrical

Job DescriptionCompany Description Derex Technologies Inc specializes in providing IT consulting, staffing solutions and software services. Globally headquartered in Harrison New Jersey since 1996 Derex delivers the highest quality technology professionals and an array of customized IT talent solutions designed to improve productivity and drive results to global clients throughout North America. With over two decades of unparalleled experience, Derex provides supports to its clientele, across such industries as Systems Integration, Banking and Finance, Telecommunications, Pharmaceutical and Life Sciences, Energy, Healthcare, Technology, Transportation, and local and federal Government agencies. Job Description Position: Senior .Net Developer Location: Parsippany, NJ (Onsite) Job Overview : The Senior Software Engineer will be responsible for the end-to-end development cycle, from design, implementation, and testing to documentation, delivery, and maintenance. This is a “hands-on” position requiring solid technical skills, as well as excellent interpersonal and communication skills. Must be capable of working independently and collaboratively. Responsibilities • Analyze user requirements and convert requirements to design documents., • Responsible for system analysis, designing the architecture for the application, and developing modules., • Interface with client teams (business and technical) to design integration using APIs., • Interface with business users and the product manager to ensure that implemented solutions satisfy business requirements and are delivered in a timely manner., • Document, test, implement, and provide ongoing technical support for the application;, • Perform code reviews to enforce best coding practices and application security (OWASP) concepts for internal and external threats and performance., • Design and automate various jobs to minimize the manual efforts; and, • Other duties as assigned or requested. Skills and Qualifications • Experience in Microsoft .NET Framework 4.0 OR above, C#, ASP.NET Core, ADO.NET, Web API, Angular, MS SQL., • Excellent written and verbal communication., • Flexible, team player, “get-it-done” personality., • Ability to organize and plan work independently., • Ability to work in a fast-paced, rapidly changing environment., • Ability to multitask and context-switch effectively between different activities and teams, • Able to train peers, software engineers, and support team members., • Minimum of 8+ years of experience required,, • Bachelor’s or master’s degree in a computer-related field., • Able to travel to customer sites Key Competencies Communicates effectively– Attentively listens to others, provides timely and helpful information, and is effective in various professional settings. Gives and receives feedback in a productive, professional manner. Demonstrates excellent oral and written communication skills. Manages Ambiguity -Operating effectively, even when things are not certain or the way forward is not clear. Flexible in approach and able to adapt to changing business needs. Manages complexity -Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Has strong organizational skills and can manage multiple activities at once. Has high attention to detail. Ensures Accountability -Follows through on commitments and ensures others do the same. Able to work independently as part of a small team. Regards, Manoj Derex Technologies INC Contact : 973-834-5005 Ext 206 Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Derex Technologies Inc specializes in providing IT consulting, staffing solutions and software services. Globally headquartered in Harrison New Jersey since 1996 Derex delivers the highest quality technology professionals and an array of customized IT talent solutions designed to improve productivity and drive results to global clients throughout North America. With over two decades of unparalleled experience, Derex provides supports to its clientele, across such industries as Systems Integration, Banking and Finance, Telecommunications, Pharmaceutical and Life Sciences, Energy, Healthcare, Technology, Transportation, and local and federal Government agencies. Job Description Position: Senior Software Engineer (Healthcare Interoperability) Location: Parsippany, NJ(On-Site) Full Time Job Overview The Senior Software Engineer will be responsible for the full development life cycle—from architecture and design, development, integration, and testing, to deployment, documentation, and support. The role emphasizes healthcare interoperability, FHIR integrations, and secure, scalable, microservices-based applications. This is a hands-on technical role involving both independent and team-based collaboration, requiring excellent communication skills, leadership qualities, and deep technical expertise. Responsibilities • Architect, design, and develop enterprise applications and microservices using Microsoft .NET/.NET Core, ASP.NET Core, C#., • Design and implement FHIR servers and RESTful APIs, ensuring compliance with HL7, SMART on FHIR, and interoperability standards., • Integrate FHIR services with EHR/EMR systems, HL7 v2/v3, and other healthcare data sources., • Implement authentication/authorization frameworks (OAuth2, OpenID Connect, SMART on FHIR) for secure data exchange., • Design and develop ETL processes and healthcare data import/export pipelines (JSON, XML, HL7, FHIR Bundles)., • Ensure applications conform to HIPAA, data security, and OWASP best practices., • Collaborate with Product Managers, Business Analysts, and clients to ensure timely delivery of business requirements and solutions., • Mentor and guide software engineers and support teams while coordinating with offshore/onshore teams., • Participate in Agile (Scrum) ceremonies, CI/CD, testing strategies, and DevOps pipelines., • Provide technical support for business applications post-deployment. Skills & Qualifications • 8+ years of software development experience in enterprise application design and development., • 2+ years of hands-on experience with healthcare interoperability standards (FHIR resources/bundles/search, HL7 v2/v3, SMART on FHIR)., • Strong proficiency in .NET, .NET Core, ASP.NET Core, C#, MVC, Web APIs, ADO.NET, Entity Framework, Dapper., • Experience with FHIR Servers/APIs (HAPI, Firely, Microsoft FHIR Server)., • Expertise in microservices, containerized application development (Docker, Kubernetes), and Azure DevOps/CI-CD pipelines., • Strong database experience with SQL Server performance tuning skills preferred., • Knowledge of SOLID design principles, object-oriented and functional programming., • Strong experience with source control systems (GitHub, TFS)., • Exposure to cloud platforms, particularly Microsoft Azure., • Strong problem-solving, analytical, and communication skills., • Ability to work independently in a fast-paced environment with changing priorities. Key Competencies • Communicates effectively– Attentively listens to others, provides timely and helpful information and is effective in a range of professional settings. Gives and receives feedback in a productive, professional manner. Demonstrates excellent oral and written communication skills., • Manages Ambiguity -Operating effectively, even when things are not certain, or the way forward is not clear. Is flexible in approach and can adapt their approach to meet changing business needs., • Manages complexity -Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Has strong organizational skills and can manage multiple activities at once. Has high attention to detail., • Ensures Accountability -Follows through on commitments and makes sure others do the same. Able to work independently as part of a small team. Regards, Manoj Derex Technologies INC Contact : 973-834-5005 Ext 206 Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager specializing in water resource engineering, you will be responsible for leading and managing projects related to water management, drainage systems, flood control, and watershed management. Responsibilities • Lead and oversee water resource engineering projects, including the design, analysis, and implementation of water management systems, drainage systems, and flood/resiliency control measures., • Serve as the primary point of contact for clients, ensuring effective communication and maintaining strong client relationships throughout the project lifecycle., • Manage and mentor a multidisciplinary project team, providing technical guidance, assigning tasks, and ensuring project objectives are met., • Develop comprehensive project plans, including scope, budget, schedule, and resource allocation., • Coordinate with internal and external stakeholders, such as government agencies, environmental consultants, and contractors, to ensure project compliance and successful execution., • Conduct hydrologic and hydraulic modeling, analyze data, and prepare reports and recommendations for water resource management projects., • Evaluate and design stormwater management systems, including detention basins, green infrastructure, and erosion control measures., • Review and approve project deliverables, including design plans, technical specifications, and construction documents., • Monitor project progress, identify potential risks and challenges, and implement effective mitigation strategies., • Ensure compliance with applicable regulations, permits, and environmental standards., • Bachelor's degree in civil engineering, Water Resources Engineering, or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years of experience in design, planning, and implementation of stormwater and hydraulic elements with a focus on project management, • Proven track record of successfully managing water resource engineering projects, including drainage systems, flood control, and watershed management. Strong knowledge of hydrology and stormwater and green infrastructure design., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient with stormwater modeling software such as CivilStorm or StormCAD required., • Business development skills and the proven ability to win work a plus., • Good client relationship development sills., • Experience writing proposals, scopes of work, and budgets for projected work., • Ability to effectively communicate at all levels of the organization., • Ability to manage & mentor staff, and direct resources effectively in a positive manner., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $83,000 - $95,000 Powered by JazzHR yd94kvAx1V

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Summary: We are seeking a highly experienced and innovative Senior Mechanical Engineer to contribute to the development of advanced electropneumatic and mechanical systems. The ideal candidate will apply indepth knowledge of mechanical engineering principles, demonstrate leadership in complex design/redesign projects, and provide technical guidance to crossfunctional teams and junior engineers. Key Responsibilities: • Apply subject matter expertise in mechanical design, analysis, and system development., • Conceive and develop solutions to complex analytical, pneumatic, mechanical, and electrical design challenges., • Establish design objectives and contribute to writing specifications and comprehensive engineering reports., • Participate in the review and development of detailed product specifications., • Conduct conceptual and detailed design studies using MCAD, Solidworks, and other tools., • Collaborate with multidisciplinary engineering teams throughout the design and development process., • Develop prototype hardware in coordination with internal manufacturing and external vendors., • Conduct rigorous testing to verify compliance with performance, safety, regulatory, and environmental requirements., • Generate and maintain detailed engineering documentation to support the product development lifecycle., • Serve as a technical mentor and project lead, providing guidance and support to junior engineers and managing small to medium sized projects. Required Knowledge, Skills, and Abilities: • Expertise in Design for Manufacturability and Assembly (DFM&A) principles., • Proficient in SolidWorks CAD software; formal training preferred., • Strong background in materials and manufacturing methods including:, • Injection molding, • Plastic extrusion, • Metal casting, stamping, and machining, • Additive manufacturing, • Familiarity with ANSI/ISO dimensioning and drafting standards and GD&T., • Experience with mechanical testing and measurement equipment, and statistical analysis of test data., • Understanding of regulatory requirements and document control systems (especially within medical device environments)., • Experience in applying FDA, IEC, and UL standards for medical electronic equipment., • Capable of thermal, structural, and vibration analysis., • Demonstrated skill in mechanism design, analytical reasoning, and creative problem solving., • Strong interpersonal, verbal, and written communication skills., • Ability to operate lab and shop equipment (e.g., drill press, lathe, milling machine, oscilloscopes, DVMs, environmental chambers). Minimum Qualifications: • BSME or MSME required., • Minimum of 10 years of progressive experience in mechanical design and product development., • Proven experience leading technical subprojects and mentoring engineers., • Advanced proficiency with: SolidWorks, MCAD/CAE tools, Microsoft Office Suite, Microsoft Visio and Project, Adobe Acrobat, • Experience with database and document management systems.

Job DescriptionMunicipal Engineer Company: Westbrook Project Solutions (on behalf of our client) Location: New Jersey Terms: Direct Hire Reports To: Client Project Leadership Schedule: Full-time Compensation: $85,000 – $150,000 (salaried) Benefits: Comprehensive package including health insurance, PTO, Profit Sharing, 401(k), and bonuses Work Location: In Office or Job Site About Westbrook Project Solutions Westbrook Project Solutions (WPS) is a construction and engineering talent solutions firm serving clients across the Mid-Atlantic and Northeast. We partner with general contractors, developers, and public agencies to provide experienced professionals who deliver projects on time, on budget, and to the highest standards of safety and quality. We are currently seeking a Municipal Engineer for one of our municipal and infrastructure clients in Wayne, New Jersey. This individual will play a key role in the design, planning, and oversight of public infrastructure projects that improve community functionality and sustainability. Job Overview The Municipal Engineer will lead and support the planning, design, and construction of municipal infrastructure projects, including roads, bridges, water systems, and other public works. This role requires strong technical skills, attention to detail, and the ability to collaborate across multiple stakeholders—including contractors, engineers, and public agencies—to deliver innovative, cost-effective, and sustainable infrastructure solutions. Job Responsibilities * Develop and implement engineering plans for municipal infrastructure projects (roads, bridges, stormwater, and water systems) * Perform detailed design calculations and prepare plans, specifications, and technical reports * Oversee and inspect construction projects to ensure compliance with design standards, quality, and safety requirements * Collaborate with contractors, engineers, and municipal agencies to achieve project milestones and objectives * Prepare cost estimates, bid documents, and contracts for construction projects * Review shop drawings, change orders, and progress reports * Maintain accurate documentation for all assigned projects * Provide technical support and consultation to municipal staff, contractors, and community stakeholders * Participate in project meetings, public hearings, and client presentations * Ensure compliance with local, state, and federal design standards and environmental regulations Skills & Experience * Bachelor’s degree in civil engineering or a related field * EIT or New Jersey Professional Engineer (PE) license preferred * Minimum of 4 years of experience in the design and construction of municipal infrastructure projects * Strong technical proficiency in AutoCAD, GIS, and engineering design software * Experience working with local and state government agencies * Excellent project management, communication, and coordination skills * Proven ability to manage multiple projects simultaneously and meet deadlines * Strong understanding of design codes, regulations, and project documentation standards EEO Statement Westbrook Project Solutions is an equal opportunity employer. We are committed to fostering a workplace that values diversity, inclusion, and equal access to opportunity. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates, including those from historically underrepresented groups in engineering and public works.

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role As a Field Process Engineer I at Weee, you will drive initiatives to optimize operational processes, improve efficiency, and deliver world-class customer experiences. This role requires strong analytical skills, project management expertise, and the ability to collaborate across multiple teams and stakeholders to execute scalable solutions in a fast-paced, dynamic environment. Responsibilities • Lead small-scale cross-functional projects focused on operational excellence and process improvement., • Partner with Central PE to identify and track operational metrics., • Collaborate with Operations, Supply Chain, and PE teams to implement solutions that improve workflow efficiency and reduce costs., • Identify and address basic root causes in current processes, create corrective action plans to achieve operational goals and ensure alignment with operational standards., • Help implement solutions and provide training to address operational challenges., • Conduct time studies and analyze data to identify trends, root causes, and opportunities for system and process improvement., • Collaborate with the central PE team and operation team to develop and maintain the standard operating procedures (SOPs) and work instructions., • Proactively mitigate safety risks within the production process, ensuring adherence to safety protocols., • Support warehouse daily operations as needed including 5S maintenance, equipment forecasting and management, • Bachelor's degree in Business, Operations, Supply Chain, Engineering, or a related field., • 1+ years of experience in internships or project management within operations, supply chain, or logistics., • Strong analytical skills with experience in data analysis tools (e.g. Advanced Excel)., • Understanding of basic concepts of lean manufacturing, continuous improvement, and Six Sigma, • Ability to work Individually with observation and analysis tools (e.g. DMAIC, fishbone diagram), • Excellent communication skills with the ability to present complex ideas clearly to both technical and non-technical audiences., • Proven ability to manage multiple priorities and work effectively in a fast-paced, ambiguous environment., • Ability to work under extreme temperatures(0~30°ree;F) in Freezer/Cooler environments, • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • The US base salary range for this full-time position is $63,000 - $74,000, • This role may be eligible to discretionary bonus, incentives and benefits Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. What You'll Do: We are looking for a Senior Storage Engineer to play a key role in designing, building, and operating our high-performance storage systems. You will contribute to the evolution of CoreWeave's storage platform by building reliable, scalable, and high-throughput solutions. This role involves close collaboration with engineering teams across infrastructure, compute, and platform to ensure our storage services meet the needs of demanding AI workloads. About the role: • Design and implement storage solutions to support CoreWeave's growing AI and cloud infrastructure needs., • Contribute to the development of exabyte-scale, S3-compatible object storage and integrate dedicated storage clusters into diverse customer environments., • Work with technologies such as RDMA, GPU Direct Storage, SPDK, and distributed filesystems to optimize storage performance and efficiency., • Participate in efforts to improve the reliability, durability, and observability of our storage stack., • Collaborate with operations teams to monitor, troubleshoot, and improve storage systems in production environments., • Help develop metrics and dashboards to provide visibility into storage performance and health., • Analyze telemetry and system data to drive improvements in throughput, latency, and resilience., • Work cross-functionally with platform, product, and infrastructure teams to deliver seamless storage capabilities across the stack., • Share your knowledge and mentor other engineers on best practices in building distributed, high-performance systems.Who You Are:, • Bachelor's or Master's degree in Computer Science, Engineering, or a related field., • 6–10 years of experience working in storage systems engineering or infrastructure., • Strong hands-on experience with object storage or distributed filesystems in production environments., • Experience with one or more storage protocols (e.g. S3, NFS) and file systems such as Ceph, DAOS, or similar., • Proficiency in a systems programming language such as Go, C, or Rust., • Familiarity with storage observability tools and telemetry pipelines (e.g., ClickHouse, Prometheus, Grafana)., • Solid understanding of cloud-native infrastructure, Kubernetes, and scalable system architecture., • Strong debugging and problem-solving skills in distributed, high-performance environments., • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $165,000 to $242,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Job Title: Project Engineer Company: PTI Tech Location: Clifton, NJ (On-site) Industry: Manufacturing / Metal & Plastic Injection Molding Experience Level: Mid to Senior Level About PTI Tech PTI Tech is a leading provider of advanced manufacturing solutions, specializing in precision metal and plastic injection molding for the aerospace, medical device, industrial, and defense industries. We are growing our technical team and seeking a skilled and motivated Project Engineer to support innovative product and process development efforts. Position Summary PTI Tech has an immediate opening for a Project Engineer to support the design and development of new products, components, and advanced manufacturing processes. This position plays a key role in PTI’s R&D and production programs, working closely with the Engineering Manager and cross-functional teams. Responsibilities include initial concept design, 3D modeling, analysis, prototyping, process development, vendor coordination, and supporting the implementation of novel engineering solutions. The ideal candidate is passionate about mechanical design, manufacturing innovation, and automation. We’re looking for a hands-on engineer with strong problem-solving skills, project leadership experience, and the ability to work effectively in a fast-paced, team-oriented environment. Key Responsibilities Design & Development • Develop production processes, tooling, fixtures, and manufacturing cells with a focus on quality and repeatability., • Perform technical and requirements analysis, researching new materials, technologies, and processes., • Apply DFM to assess part moldability and recommend design improvements for injection molding (plastic, metal, ceramic)., • Lead engineering projects from concept through production, coordinating cross-functional teams and external partners., • Create and manage project timelines, task assignments, and deliverables., • Write detailed work instructions, set up manufacturing equipment, and establish standard operating procedures (SOPs)., • Design and implement automation processes to increase manufacturing efficiency and consistency., • Program and troubleshoot Universal Robots and Arburg robotic systems., • Design and develop custom end-of-arm tooling for robotic automation., • Integrate automation systems into production workflows and support new product introductions (NPIs)., • Support ongoing production by resolving technical issues and improving part quality., • BS or MS in Mechanical Engineering, Materials Science, or related field., • Proficiency in CAD design using SolidWorks., • 5+ years of experience in mechanical design and development of injection-molded or over-molded parts and assemblies., • Strong knowledge of DFM, injection molding (plastic/metal), tool and mold design, and automation integration., • Experience with machine shop processes: turning, milling, EDM, and CNC machining., • Fluent in interpreting engineering drawings and applying GD&T., • Strong project management and organizational skills., • Experience in aerospace, medical device, defense, or industrial sectors., • Familiarity with additive manufacturing., • Experience with process validation, lean manufacturing, and quality systems., • Program management experience is a plus. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients, many of whom have partnered with us for decades. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn back-to-back Best Places to Work in NJ awards and driven strong employee retention. Position Overview Due to expansion, we are seeking a Group Manager for our Municipal team to lead and oversee the planning, design, and execution of municipal infrastructure projects. This leadership role requires deep technical expertise, strong project management skills, and a commitment to ensuring all projects meet the latest industry codes, standards, and regulatory requirements. Core Responsibilities Strategic & Business Leadership -Define and execute annual and long-term business plans for the Municipal Engineering Group, fully aligned with CP Engineers’ company-wide vision. -Establish, monitor, and exceed group-level KPIs covering revenue growth, financial utilization, labor multiplier, and client retention. -Run the group as a business, including forecasting, resource planning, and identifying new opportunities for growth. -Lead efforts to hire, onboard, and develop high-performers (including Project Managers, Market Managers, and key engineers). Financial & Operational Performance -Own the group’s financial health: oversee revenue, profitability, budget stewardship, and capital planning. -Optimize use of project management and financial tools (e.g., Ajera) to actively monitor and improve key metrics. Group Manager – Municipal Engineering -Ensure streamlined billing cycles, efficient management of work-in-progress (WIP), and strong receivables performance. -Help set and guide pricing, proposal, and contract strategies. Organizational Change & Team Culture -Promote and lead major organizational changes that strengthen how the Municipal Engineering Group functions. -Champion continuous improvement, adoption of new technologies, and consistent implementation of best practices. -Foster a collaborative, accountable, and high-performance environment—ensuring team engagement and alignment with organizational goals. Client Development & Brand Stewardship -Build durable client relationships focused on satisfaction, sustainability, and repeat engagements. -Represent CP Engineers at high-level meetings, public forums, and industry events, further strengthening the firm’s market position. -Oversee client transitions, relationship continuity, and quality project delivery. -Direct and refine group marketing and pursuit efforts, making full use of CRM and analytics for smarter business development. Talent Management & Staff Development -Recruit, coach, and mentor a civil engineering team to assure both professional growth and delivery excellence. -Conduct regular staff reviews and collaborate on individualized development plans that support company objectives. -Drive accountability for individual and group KPIs and ensure compliance with all personnel policies and procedures. Project Oversight & Quality Control -Project Oversight: Lead the planning, design, and execution of municipal projects—including roads, stormwater management, and public infrastructure—ensuring compliance with all applicable codes and standards. -Regulatory Compliance: Ensure all projects adhere to local, state, and federal regulations, including permitting and municipal stormwater management rules. -Technical Leadership: Provide technical guidance and mentorship to engineering staff, promoting the application of best practices and compliance with industry standards. -Client Representation: Serve as the primary point of contact for municipal clients, representing municipalities as a municipal or board engineer at public meetings and providing expert advice on engineering and compliance matters -Provide senior oversight across all group projects, ensuring delivery meets standards for quality, budget, and timeliness. -Standardize project management practices in alignment with established company controls and policies. -Implement robust QA/QC procedures and actively support risk management and continuous learning within the team. Key Performance Indicators (KPIs) (Examples based on 2025 business objectives) -Group Revenue, Revenue Growth, and Labor Revenue Multiplier -Gross and Financial Utilization -Billing Variance (<2.25%) -WIP (<30 Days) and Uncollected A/R (<60 Days) -Client Retention and Satisfaction Metrics -High-Impact Hires Completed and Retained -Execution of Organizational Change Initiatives -Compliance with Internal Project Controls Why CP Engineers? CP Engineers offers the chance to lead, innovate, and grow a team as your own business within a collaborative and fast-growing firm. If you are energized by leadership, value building high-performing teams, and want to drive real impact in municipal engineering, we invite you to apply and shape the future with us. Apply Today. Be the growth catalyst for CP Engineers’ Municipal Engineering Group. Salary range: $140,000.00-190,000.00 Requirements • Bachelor’s degree in Civil or Environmental Engineering required; Master’s or business credential preferred., • Professional Engineer (PE) license highly preferred., • Minimum 15 years of progressive experience in Civil and/or Municipal engineering, with substantial leadership and management responsibilities., • Demonstrated success in building and leading high-performing teams, driving business unit success, and consistently surpassing financial and strategic goals within dynamic, growth-oriented environments., • Proven track record of managing medium-to-large complex projects., • Competencies, • Strong business and financial acumen, • Proactive, entrepreneurial mindset, • Advanced leadership, talent development, and organizational change skills, • Highly effective communication, negotiation, and relationship-building abilities, • Hybrid/remote work options, • Flexible hours, • 401(k) with 4% company match, • 20 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance

Job DescriptionYU & Associates' is currently searching for an Entry-Level Civil Engineer to join our site/civil department in our Elmwood Park, New Jersey location. The individual will be working on site and airport design, designing mixed-use developments, residential, higher education, and other exciting land development projects. This position will serve as a member of an integrated design team and be responsible for coordinating civil design along other disciplines, to meet project schedules and budgets, while working directly under licensed Engineers. Qualifications: • Bachelor's degree in civil engineering Required; master's degree Preferred., • EIT is strongly preferred., • Demonstrate basic proficiency with AutoCAD Civil 3D, have strong technical skills, and possess the ability to learn and apply new skills quickly and efficiently., • Proficiency with Microsoft Office software including Word, Excel, and Outlook is needed., • Knowledge of MicroStation is a plus., • You must demonstrate strong written and oral communication skills., • Committed to working efficiently to complete tasks under strict schedule restraints., • The ability to work independently or within a team environment., • You must be a self-starter with strong problem-solving skills., • Understanding of basic engineering theories and principles., • Understanding of basic practices of researching engineering and design issues, evaluating alternative, making sound recommendations., • Own transportation and a valid driver's license., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR y8x0MWginS

Job DescriptionThe Project Manager will be in charge of supervising the development of complex projects while observing pre-determined conditions (cost, quality, safety, timelines). The Project Manager will participate in defining the project's specifications, planning its implementation and drawing up its budget. They will be involved with both technical and financial aspects and coordinate the work of the various participants involved. Ensure that the development methods, timelines and costs are observed during each phase of the process. Serves as a primary contact for our clients and is responsible for ensuring that the contracted services are provided in a timely and professional manner. Has overall responsibility for all aspects of, and the success of, all assigned projects. Responsibilities: • As the project progresses the project manager will be responsible for identifying unanticipated tasks that can increase the cost of the project or delay meeting the assigned schedule., • The project manager will monitor the progress of the project; Interprets, organizes, executes, and coordinates assignments., • The project manager will establish the project budget, track the actual project expenditures against the forecast expenditures and will implement corrective action as needed. The project manager will prepare cost to complete estimates to determine whether the project can be completed within the assigned budget., • The project manager will be responsible for assuring that all internal project quality assurance procedures are followed., • Applies a thorough knowledge of current principles and practices of engineering as related to the variety of aspects affecting the firm., • Supervises a staff of engineers and technicians., • Plans, schedules, or coordinates the preparation of documents or activities for multiple major projects., • Responsibilities may include marketing, budgeting, financial managements, schedule coordination and resources allocation., • Performs preliminary engineering design and/or reviews the design and drafting work of staff or project engineers, CAD operators., • Coordinates work with other engineers and professionals within and outside own discipline, and with support services staff., • Assisting in company-wide business development in all disciplines of the firm’s practice.Qualifications:, • Master’s degree in engineering from an accredited college or university., • Registered Professional Engineer in New Jersey or New York., • Possess 8+ years of engineering management experience., • Proven ability to identify, develop and mentor talent., • Excellent listening, written and oral communication skills., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.Strong technical writing, communication skills and interpersonal skills are expected at this level, proven through technical presentations, technical papers and/or participation in technical committees. We offer employees competitive compensation packages; benefits packages; life insurance, short/long term disability insurance; and 401K retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation rU5jzp7Ihr

Job DescriptionSales Engineer Our client, a well-established manufacturer with a rich international history and a track record of stability, is experiencing tremendous growth in their product line. They are looking for a full-time, permanent Sales Engineer position based in Parsippany, New Jersey The client seeks a proactive and solution-oriented professional who holds a degree in engineering or a related field and possesses at least 3 years of relevant experience. The preferred candidate will have experience in industrial automation and machinery manufacturing/sales. Strong expertise in technical sales, excellent communication skills, and the ability to work collaboratively with a team are prerequisites for this role. Sponsorship is not available for this position. Key Responsibilites. Develop and deliver customized technical presentations, aligning product capabilities with customer requirements. Engage in detailed discussions with customers and engineers to assess equipment needs and determine system requirements, offering informed technical advice and solutions. Play an integral role in collaborating with sales teams to understand customer requirements, providing essential sales support and advanced expertise. Take charge of local procurement and production matters, including the organization of part purchases and coordination of production modifications with external providers. Actively recommend improvements by suggesting material or machinery upgrades that promise cost savings and production enhancements. Travel Requirements Candidates must be open to traveling up to 30% domestically which includes attending trade shows and conducting on-site customer visits. Most, About Port View Resources: Port View Resources provides outsourced recruitment services to America's Manufacturers, Designers, and MEP firms nationwide.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Our flexible work environment, competitive compensation, and supportive culture have resulted in high employee satisfaction and retention and helped us win back-to-back Best Places to Work awards. Position Overview Due to expansion, we are seeking a Project Engineer for our Municipal & Civil Engineering practice. This role focuses on the design, review, and management of municipal infrastructure and private development projects. The ideal candidate will combine technical proficiency with a strong understanding of regulatory requirements and industry standards. Key Responsibilities • Design & Documentation: Develop and review contract drawings, engineering reports, and technical specifications for municipal infrastructure and private development projects, ensuring compliance with industry standards and best practices., • Regulatory Compliance: Conduct planning and zoning board reviews to ensure all projects adhere to local, state, and federal regulations, including New Jersey Municipal Land Use Law, zoning ordinances, and NJDEP requirements., • Permitting: Assist in preparing permit applications and supporting documentation for regulatory approvals, ensuring accuracy and completeness., • Site Assessments: Perform site inspections, assessments, and evaluations to verify adherence to municipal design standards, environmental regulations, and approved plans., • Stakeholder Coordination: Coordinate with municipal officials, planning boards, and regulatory agencies on land development and public works projects, providing clear technical guidance., • Technical Support: Provide recommendations for stormwater management, grading, roadway improvements, and drainage solutions, applying current standards and design guidelines., • Project Assistance: Support senior engineers and project managers in budget development, project scheduling, and resource allocation to ensure successful project delivery. Join CP Engineers and help deliver high-quality municipal and civil engineering solutions that meet the highest standards of safety, quality, and regulatory compliance. Apply today! Salary range: $85,000.00-$105,000.00 Requirements • Bachelor’s degree in Civil Engineering or a related field, • Minimum of 4 years of experience in municipal engineering, with a focus on contract drawings, planning & zoning board reviews, and stormwater engineering, • Proficiency in AutoCAD and Civil 3D, • Strong understanding of New Jersey municipal land use regulations, zoning ordinances, and permitting processes, • Experience with NJDEP regulations, stormwater management design, and municipal site plan preparation, • Hybrid/remote work flexibility, • 401(k) with company match, • 16 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance, • Training and development opportunities

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in civil engineering with a minimum of 3-5 years of field or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Professional Engineer (PE) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Water Resource Engineer to join our team. As a Senior Water Resource Engineer, you will play a critical role in the planning, design, and management of water resource projects, focusing on civil engineering, hydraulic modeling, water control, and stormwater treatment structures. Job Description: • Support various phases of our water/wastewater design projects., • Prepare comprehensive reports, opinions, and recommendations based on research, analysis, and interpretation of studies., • Manage Water Resource aspects of project budgets and deadlines., • Leading project design efforts, and/or design team coordination., • Drafting and designing plans as necessary utilizing Civil3D software., • Liaise with clients, regulatory agencies, and stakeholders to ensure project objectives are met and maintain positive relationships., • Responsible for meeting internal and/or external deadlines., • Coordinating with other teams or groups to assure resource management for all projects or tasks., • Stay current with industry trends, regulations, and best practices related to water resource engineering., • Support and participate in the development and mentorship of staff.Requirements:, • Bachelor’s degree in civil engineering, concentration in Water Resources preferred., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • A minimum of 5 years’ experience in stormwater management systems, wastewater/sanitary systems, and project permitting is required., • MS Office proficiency., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • Knowledge of stormwater modeling software such as CivilStorm or StormCAD required., • Strong knowledge of hydrology and stormwater and green infrastructure design, • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 TO $120,000 Powered by JazzHR MCFsV5IdnN

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation