Trabajos technician en Arizona - Page 6

Job DescriptionSalary: $20 - $40 per hour The Traffic Signal Technician is responsible for the installation, maintenance, inspection, and repair of traffic signals, street lighting, and related electronic equipment. The role ensures that traffic control devices operate safely, efficiently, and in compliance with local, state, and federal regulations. Responsibilities • Install, maintain, and repair traffic signals, signal controllers, pedestrian crosswalk systems, and related electrical/electronic equipment, • Conduct routine inspections of signalized intersections and perform preventive maintenance, • Troubleshoot and diagnose malfunctions in traffic signal systems and make necessary repairs or adjustments, • Calibrate and program signal controllers (e.g., NEMA, Type 170/2070), • Maintain detailed records of work performed, equipment used, and parts ordered, • Respond to emergency repairs and outages, including during nights or weekends, • Interpret blueprints, wiring diagrams, and technical manuals, • Ensure compliance with MUTCD standards and other applicable safety and regulatory guidelines, • Coordinate with utility companies, contractors, and other city departments, • Operate and maintain various tools and equipment including bucket trucks, multimeters, and hand/power tools, • Wear required PPE Requirements • High School diploma or equivalent education; technical or vocational training in electronics or electrical systems preferred, • 2+ years of experience in traffic signal maintenance or related field, • IMSA Traffic Signal Technician Certification (Level I or II) preferred or required depending on jurisdiction, • Strong knowledge of traffic signal systems, electrical codes, and safety procedures, • Ability to read and interpret schematics and technical diagrams, • Valid drivers license; CDL may be required for some positions, • Ability to work independently and respond to after-hours emergencies, • Ability to stand and exert physical effort performing manual labor most of the day, • Ability to lift up to 60 pounds regularly and up to 100 pounds occasionally, • Ability to work in severe weather conditions, including extreme heat, • Ability to pass pre-employment and random drug tests Work Environment While performing the duties of this job, the employee is regularly exposed to: • The outdoor elements, subject to variations in temperature and weather conditions, equipment noise, and dust, • May be required to perform specific tasks that involve climbing, lifting, pushing, kneeling, working at heights, or in confined spaces, • Must be able to lift and carry heavy equipment or tools

Job Description We are currently looking to fill a position immediately for an experienced Commercial overhead door installer / technician. Gate experenice is a plus! We are a long time family oriented based company that has a great customer following and culture as a company. If your looking to join a team that works together and that is busy, look no further. I feel it would be great for you to give us a call and chat with us. All calls are confidential. We offer company truck you take home Paid vacation paid holidays bonus structures a team who is here to support each other. DOE 30.00 to 40.00 per hour

Job Description Pay: $18.00 - $24.00 an hour (DOE) Schedule: Monday through Friday 8 am to 5 pm Location: Surprise, AZ Are you passionate about making a difference in the lives of children with autism and developmental disabilities? Ally Pediatric Therapy is looking for dedicated and compassionate Behavior Technicians to join our team. At Ally Pediatric Therapy, we specialize in Applied Behavior Analysis (ABA), speech-language, and feeding therapy, providing personalized care that empowers families and supports children’s growth journeys. We’re seeking team members who are eager to contribute to a positive, collaborative environment where your work truly matters. Responsibilities • Implement personalized ABA treatment plans created by Board Certified Behavior Analysts (BCBAs) while maintaining a professional and supportive demeanor with clients, families, and colleagues., • Track client progress toward treatment goals, prepare necessary materials for sessions, and communicate updates or concerns to the BCBA and therapy team., • High school diploma or equivalent (required); bachelor’s degree in a related field (preferred)., • Experience with children with autism or developmental disabilities (preferred)., • Completion of or willingness to complete Registered Behavior Technician (RBT) training within 60 days upon hire., • Reliable transportation for travel to therapy centers., • Strong organizational skills, attention to detail, and ability to work both independently and collaboratively. Physical Requirements • Active role requiring frequent kneeling, squatting, standing, and sitting on the floor., • Enjoy career development opportunities, paid training, robust medical, dental, and vision coverage, company-paid short-term disability and life insurance, voluntary benefit options, a 401(k) plan with company match, generous paid time off, sick leave, and paid holidays.

Job DescriptionBenefits: • Company car, • Competitive salary 30.00 - 48.00 per hour plus commissions PLUS Commission only options Are you prompt and great with customers? MUST Have 3+ years experience! Please send us a resume or an email explaining your experience and background. Please don't apply if you don't have experience. This position is experience only. The more knowledge and experience you have the more you make! Overhead Garage Doors, Hollow Metal and Storefront Doors, Gate Automation, Dock service and install, Hangar Doors, Sales, Service, Installation. What we provide; Amazing culture Top paid salaries in the industry Company truck Company gas card Company phone Company tablet in most trucks Paid vacation Paid holidays Along with benefit options. Looking to join a great team? Openings are ready now! All applications are confidential. IN THE SUBJESCT LINE PLEASE PUT- Garage Door Tech Please reach out to our office 602-335-1077 We are NOT willing to train so you must have experience. More experience = more pay!!! Industrial. Commercial. Residential.

Job Description WHAT WE OFFER Your journey with Capstone Copper starts here. At Capstone, our people are the heart of our organization. We are focused on growth and are committed to unlocking the full potential of ourselves, our teams and our resources. We invest in our people to develop a skilled and engaged workforce, not only for today, but for the future. If you are looking for a purposeful, performance-driven and dynamic work environment, join us! Pinto Valley is an open-pit copper mine located at the west end of the historic Globe-Miami mining district of central Arizona, approximately 80 miles east of Phoenix. Pinto Valley has been in operation since 1972 and has produced more than four billion pounds of copper. Acquired by Capstone from BHP in 2013, the mine is fully permitted through 2039 and a study is underway to potentially extend the mine life through 2050. Our proximity to the Greater Phoenix metro area provides prospective employees with the option to live in communities such as Mesa, Apache Junction, Gilbert, Chandler, San Tan Valley, or Florence. Our location offers a unique work-life balance, blending the rewarding opportunities of the mining industry with easy access to the vibrant energy of Downtown Phoenix, making it an ideal choice for both individuals and their families. Capstone employees are eligible for an extensive total rewards package, designed to support your physical, mental, financial, and emotional well-being. This package includes, but is not limited to: • 401(k) Savings Plan – Eligible from day one, contribute up to 30% of your salary with a dollar-for-dollar company match up to 6%, fully vested immediately., • Retirement Boost – The company contributes 8.5% of your salary, increasing to 14.2% after reaching the Social Security wage base, with 100% immediate vesting., • Employee Share Purchase Plan – After three months, contribute 2% to 7% of your salary (max $5,000/year) to buy company shares, with a 50% company match, fully vested upon grant., • Annual Short Term Incentive Bonus – Up to 15%, • We offer a 7-on, 7-off schedule that consists of one week of alternating 12-hour day and nights shifts followed by one week off, offering a great work-life balance with ample time for rest and personal activities., • Salaried non-exempt role – Eligible for overtime, • Affordable Medical, Dental, and Vision benefits (effective on start date), including Telehealth options and additional supplemental insurances, • Disability and Life Insurance (effective on start date), • Paid time-off, including vacation, holidays, sick leave, and parental leave, • Employee Assistance Program, • Internal progression opportunities, • Tuition reimbursement, • Discounted insurance plans for pets, automobiles and homes, • Additional Potential Benefits:, • $5,000 sign on bonus (previous Capstone Employees not eligible) As a journeyman level instrumentation technician, you will set up, test and operate instruments and electronic devices that are used in mine and processing environments. You will troubleshoot instruments and devices, ensuring that instrument readings are accurate and properly documented. • Demonstrate commitment to safety and Capstone’s Values in Action., • Test and calibrate instruments for heat, pressure, volume, particle size, flow rates, and PH factors., • Maintain, troubleshoot, calibrate, and test pneumatic, electric, electronic, and hydraulic instrumentation devices., • Advise operations and maintenance departments on status, condition, and known issues of equipment that could affect/improve their ability to achieve production goals. Required • 3+ years instrumentation maintenance experience in a production environment, • Solid understanding of electrical fundamentals., • Experience with OEM maintenance repair manuals., • Able to speak, comprehend, read, and write English., • Experience working in mining, oil & gas, or water treatment industries., • SAP experience. All candidates will be required to complete a pre-employment medical exam, drug and alcohol test, and background check. All positions require a pre-placement physical examination to ensure candidates are 'fit for duty’. Additional training and/or testing may be required. Capstone maintains a drug and alcohol-free workplace. CAPSTONE COPPER IS AN EQUAL OPPORTUNITY EMPLOYER.

Job DescriptionAUTO EXPERIENCED TECHNICIAN Job Summary: The responsibilities of a Service Technician include diagnosing, maintaining, and repairing customer vehicles. They will have great communication skills. About Us: We at Larry Green Chevrolet and Hyundai of Cottonwood are in great need of class "A" technicians. We are willing to pay top dollar for the right person. These technicians MUST have knowledge of how to DIAGNOSIS, vehicles, transmission and diesel experience and looking for a career that can be rewarding both financially and personally. We will provide updated training and information from GM as it arrives. We have lots of work and you will be busy all the time. We hope that this person will treat every vehicle as if it was there own and have complete satisfaction in repairing vehicles correctly. Pride and a strong work ethic make a big difference. We are in area that is known as the wine valley of Arizona. We have all types of activities to include hiking, horseback riding, ATV trails, skiing, boating and a great climate where all of these activities can be done almost all year round. Service Technician Compensation and Benefits: • Competitive Pay based paying top dollars for the right person with positive increases as warrantied. We will pay what you are asking for based on your experience., • GM Training/ Hyundai training, • Health Insurance, • PTO & Sick Leave, • Discounts on Vehicle purchases, Service. Parts, • Compensation: Based on ability and experience, hourly and flat rate, • Perform work specified on the repair order with efficiency and in accordance with dealership, • Test drive vehicles, and test components and systems, using diagnostic tools and special service equipment, • Diagnose, maintain, and repair vehicle automotive systems, • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed, • Provide estimates of time needed for additional repairs, • Execute repairs under warranty to manufacturer specifications, • High school diploma or equivalent, • At least 3 years of experience as an auto technician, • GM or Hyundai certification a BIG plus, • Knowledge in all aspects of automotive repair and maintenance, • Fast, eager learner and team player, • Excellent written and verbal communication skills, • Strong customer service skills, • Computer skills and willingness to learn new problems, • Ability to operate electronic diagnostic equipment

Job DescriptionDescription: Position Summary: Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the maintenance lead technicians concerning progress of the assigned work., • Perform airframe and powerplant repairs, inspections and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc., • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management., • Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to subordinates and employees., • Five or more years related experience and/or training; or equivalent combination of education and experience., • Five or more years demonstrated experience in aircraft maintenance inspections and repairs., • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test., • Willing to work weekends, if needed., • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace., • Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.

Job DescriptionOn-Call IT Field Technician – PC, Mac, Printer & Scanner Support ???? Location: Multiple U.S. Cities (Local, Onsite Support) ???? Job Type: Independent Contractor (1099) ???? Pay: $35/hour (on-site) ???? Schedule: Flexible – You accept jobs based on your availability ⚠️ Important Note This is an on-call, 1099 independent contractor role with no guaranteed hours. You’ll join our technician network and receive job opportunities based on your location and stated availability. You decide which jobs you want to accept. About Geeks on Site Geeks on Site has been delivering trusted, on-site IT and technical support to homes and businesses nationwide for over 20 years. We’re expanding our network of skilled on-call technicians to meet growing demand for in-person support — including computers, networks, printers, and more. About the Role We’re hiring field IT technicians who can confidently support a wide range of tech needs for residential and small business customers. This includes troubleshooting PCs and Macs, resolving network issues, and repairing or configuring printers/scanners — including issues like Canon MF printer network setup or G-series ink absorber error codes (e.g., 1700). You’ll be dispatched to customer sites, work independently, and complete service calls efficiently and professionally. Key Responsibilities • Diagnose and repair hardware/software issues on Windows and macOS systems, • Resolve boot errors, OS issues, and login problems, • Set up or troubleshoot Wi-Fi and wired internet connections, • Replace or upgrade hardware (HDD, RAM, cooling fans, etc.), • Configure or connect printers and scanners (Canon, HP, Brother, etc.), • Address common printer error codes (e.g., ink absorber, paper feed, connectivity), • Perform general maintenance on multifunction printers (MFPs), • Reinstall operating systems using bootable USBs or recovery media, • Install remote tools or shortcuts as requested, • Communicate clearly with customers and provide basic post-service support, • 2+ years of field IT support experience, including computer and printer work, • Familiarity with Canon, HP, and other common printer brands, • Knowledge of error code troubleshooting (e.g., Canon code 1700, boot issues, driver conflicts), • Experience with both Windows (10/11) and macOS troubleshooting, • Must have personal tools (bootable USB, screwdriver set, etc.), • Reliable vehicle and valid driver's license, • Smartphone with camera and data for documentation and communication Compensation • $35 per hour for on-site time, • Flexible scheduling — accept only the jobs that match your route and availability, • National brand recognition and continuous job offers, • Dispatch and tech support team available to assist remotely ✅ What to Expect After You Apply • ???? Intro Call – A recruiter will contact you for a quick chat, • ???? Onboarding – Complete paperwork and tax forms electronically, • ???? Background Check – Mandatory before activation, • ???? Set Your Availability – You enter your availability in our tech portal, • ???? Start Receiving Jobs – You’ll be dispatched jobs based on proximity & skills Join Our Technician Network If you're a reliable, tech-savvy field technician with hands-on printer experience and a flexible schedule, we’d love to hear from you.

Job Description Nationwide Search - Relocation and opportunities to travel available One of the fastest growing manufacturers of mission critical power equipment is seeking Commissioning Techs to oversee the installation and commissioning of their medium voltage switchgear. The right candidate will have a background doing medium voltage electrical work and some formal education; trade school, military, or on the job. Though no formal certifications are required. The right candidate will be customer focused, attentive to detail, and a solid communicator both verbal and written. The person will be charged with the start up, commissioning, trouble shooting, and repair of power equipment such as switchgear found in data centers. So experience and aptitude in electrical installations, repairs, and service for sophisticated equipment is a must. Field Service Techs will test and commission equipment in house and on job sites. Overnight travel can be mitigated by living in or relocating to areas where the work is abundant. -Pay for this role will range from $35-50hr with ample OT available -Fully vested 401k day 1 - 100% match up to 6% of salary -2 weeks PTO day 1 plus 8 major holidays -EOY bonus based on company and individual performance targeting 10% -Opportunities for quick growth within a rapidly growing company. First promotion expected within 2 years -Relocation available for qualified candidates #IND2

Job Description Job Summary Lab Med Tech Shift options: 3(12)s or 7 on 7 off. 7 on 7 off consists of 3(12)s and 4(10)s. BLS and 2 years exp and ASCP Full-time, Contract Requirements- Minimum of 2 years' exp req Must be a registered Laboratory Technician with the American Society of Clinical Pathologists or American Medical Technologists Type of equipment: Ortho 7600, Ortho 5600, Ortho Vision, Sysmex 1000, Sysmex CA600, ID Now, Clinitek Advantus, MedTox, iStat, Bactec · Automated Medication dispensing system: Unknown per dept · EMR (Epic, Cerner, etc): RMPS 1. Performs a variety of laboratory tests and procedures to determine presence of normal and abnormal components; performs blood group, type and compatibility tests, studies cells and morphology, 2. Performs and reviews quality controls in testing; decides if results are within acceptable ranges, researches problems and corrects., 3. Participates in scheduled and unscheduled maintenance of instruments, proficiency testing as assigned; quality control testing and data analysis, 4. Prepares solutions, stains, reagents and other equipment and supplies as required for the completion of tests and examinations, 5. Reviews reports, accessions logs, computer generated reports and other information produced in the clinical laboratory to ensure legibility, accuracy and timely delivery, 6. Establishes and controls testing site to ensure that environmental conditions are appropriate including, but not limited to, temperature, humidity, air circulation, sample volume/content and/or suitability, 7. Maintains professional knowledge and proficiency in Medical Technology through continuing education programs and mandatory staff meetings and in-service training, 8. Prepares clear, technically sound, accurate and informative reports of tests, analyses and examinations to ensure timely and thorough data for patient treatment decisions, 9. Collects blood specimens as ordered by venipuncture and capillary puncture in accordance with all safety and infection control procedures, 10. Greets patients and provides instructions to patients and patient’s family on proper specimen collection and aftercare, 11. Prepares and affixes labels to specimen vials to ensure proper identification, 12. Participates in departmental orientation, on the job training and quality assurance programs/initiatives, 13. Participates in a variety of department and hospital educational programs to maintain current skill and competency levels; identifies and discusses performance or training needs with Supervisor, 14. Performs other duties as assigned KNOWLEDGE, SKILLS AND ABILITIES -Skill with the technologies and methods used in testing blood -Ability to look into the details and getting apt results from the tests performed -Ability to meet the assigned task within time -Ability to use effective communication -Skill in handling all kinds of laboratory equipment PERFORMANCE EXPECTATIONS -Uphold all principles of confidentiality and patient care to the fullest extent. -Adhere to all professional and ethical behavior standards of the healthcare industry. -Interact in an honest, trustworthy and respectful manner with patients, employees, visitors and vendors. -Display respect and understanding of all individual’s personal and cultural beliefs, values, ideas and contributions in a supportive manner. -Communication is vital between associates, patients, and visitors by fostering fairness and by using terms our patients/families and associates can understand. -Provide the utmost in customer service to both patients and fellow associates. -Comply with San Carlos Apache Healthcare Corporation policies and procedures

Job DescriptionA Tire Technician is responsible for the dismounting, mounting and balancing of all tires sold. The Tire Technician will also be required to install custom tire and wheel packages. Job Qualifications: Prior knowledge of tire related equipment and tools a plus Valid Drivers License Education Requirements: High School diploma or equivalent Essential Job Functions: Properly secure vehicle to lift to ensure safe operation Properly dismount and remount tires and wheels securely on vehicle Properly dismount and remount tires onto wheels without damaging either Operate all related equipment and tools as trained Operate independently and as a team member Perform and demonstrate Customer Service Satisfaction Operate safely and perform as listed below Safety Requirements: Perform all safety related items as per the Employee Safety Manual Learn and maintain all lifting procedures Learn and maintain all general housekeeping and ensure daily performance Report all accidents and incidents immediately upon them taking place to your direct supervisor Weight Requirements: Lift a minimum of forty-five (45) pounds Perform repeated and repetitive movement consistent within the tire industry Other Duties/Responsibilities: Other duties can and will arise and you should be prepared to take on these challenges openly.

Job Description Role Snapshot Picture your morning in Phoenix, AZ: you roll into the shop, review the service board, and head out to tackle a mix of scheduled maintenance and urgent field calls. By midday, you’ve diagnosed a stubborn electrical fault on an electric lift, swapped a hydraulic hose on a diesel unit, and documented each repair cleanly and accurately. In the afternoon, you collaborate with teammates to reduce repeat issues and keep our fleet running safely and efficiently. That’s a typical day for our senior forklift mechanic. Note: This is not a forklift operator position. It’s a hands-on mechanic/technician role focused on repair and preventive maintenance. What You’ll Do • Service, maintain, and repair a variety of forklifts and material handling equipment across gas, diesel, and electric platforms., • Diagnose mechanical, electrical, and hydraulic issues; perform tests and inspections to prevent downtime and ensure safety., • Document all work performed, parts used, and maintenance activities with precision and timeliness., • Handle both in-shop tasks and field service calls as needed., • Partner with the team to boost equipment reliability and minimize repeat failures., • Stay current on emerging technology, OEM updates, and best practices in material handling., • Follow OSHA standards and company procedures while keeping your workspace clean and organized. What You Bring, • High school diploma/GED required; technical or vocational training in mechanics preferred., • 8+ years of experience as a forklift mechanic or heavy equipment technician., • Deep knowledge of mechanical, electrical, and hydraulic systems, plus the ability to read manuals, wiring diagrams, and schematics., • Strong diagnostic mindset, attention to detail, and solid organizational habits., • Comfort working independently or collaborating within a team., • Valid driver’s license and clean driving record; company vehicles may be provided for field assignments., • Personal tool set preferred. Preferred (Not Required), • OEM certifications (Toyota, Hyster, Crown, etc.)., • ASE or similar mechanical certifications., • Bilingual English/Spanish a plus. Compensation & Benefits, • $1000 Sign on Bonus, • Health, dental, and vision insurance, • Paid time off, holidays, and 401(k), • Referral Bonus Program, • Monthly Performance Bonus Potential, • Overtime opportunities based on performance, • On-the-job training, • Work boot allowance, uniforms, and cleaning provided, • Opportunities for advancement and ongoing training, • Company vehicle and mobile phone for field service techs Core Proficiencies, • Equipment troubleshooting and mechanical diagnostics, • Hydraulics, electrical systems diagnostics & repair, • Diesel engine systems and light vehicle diesel engines, • Material handler equipment experience, • High School / GED

Job Description Tire Technician Location: 15812 N. 32nd St., Phoenix, AZ 85032 Pay: $17.00 – $20.00 per hour effective rate (hourly + commission + overtime) We're a performance-driven, results-focused team that knows how to deliver. Every role here plays a key part in shaping an exceptional experience for our customers and for each other. We offer the kind of benefits you'd expect from a larger organization — plus a few that give us an edge over the competition. And the best part? You'll be joining a driven, genuinely solid team that sets the standard for speed, accuracy, and service. Compensation & Benefits • Competitive hourly rate + commission and overtime opportunities, • Paid vacation and holidays, • Medical, dental, vision, life, and supplemental insurances, • 401(k) with company match, • Employee discounts, referral bonuses and ASE reimbursement, • Genuine career growth — with progression into Mechanic, Service Advisor, or Management positions, evidenced by hundreds of team member promotions Tire Technicians: • Mount, dismount, balance, and rotate tires, • Repair flats and inflate to spec, • Test, replace, register, and reset TPMS sensors, • Perform oil changes and replace filters, • Conduct visual inspections and document issues, • Test and install batteries, • Stock inventory and maintain shop cleanliness and safety standards, • Work with your team to deliver fast, accurate, elite service, • Opportunity to progress into light mechanical services (brakes, suspension, alignments) as skills and experience allow What Makes You a Great Fit • Tire/lube or automotive service experience preferred, • Strong work ethic, reliability, and a team-first attitude, • Detail-oriented, safety-minded, and eager to grow, • Valid driver’s license and clean driving record, • Physically able to lift 70 lbs and work on your feet, • Flexible availability, including weekends, since that’s when our guests rely on us most About Big Brand Tire & Service For 50+ years, Big Brand has been the trusted name in tires and auto repair. Now in over 10 states and growing fast, we’re serious about two things: delivering world-class service to our customers and being the employer-of-choice by providing endless opportunities for career growth. Apply today! If you’ve got what we are looking for, one of our recruiters will reach out to you by phone THIS WEEK Big Brand Tire & Service is an Equal Opportunity Employer. We celebrate diversity and are committed to a respectful, inclusive workplace. Powered by JazzHR fbQxIDNkGn

Job Description Turner Staffing Group is seeking two Core Logging Field Technicians to support a client's drilling and exploration program near Wickenburg, Arizona. This is an on-site, project-based opportunity ideal for early-career geologists/ field technicians looking to gain more hands-on experience in active exploration and drilling operations. Project Schedule Phase 1: Mid-January to Early March (First 6 Weeks) • 14 days on / 14 days off In this role, you will work both in the field and in the core shed, supporting drilling operations through accurate logging, core handling, and technical coordination. You may also assist with supervising drilling progress, productivity, and safe work practices. This position offers direct exposure to exploration activities and close collaboration with technical teams, making it an excellent growth opportunity for developing geologists. Key Responsibilities • Perform geotechnical core logging processing work, • Scan rock core and record geological and geotechnical data, • Interact with RSX and technical staff on geological and data-related matters, • Support oversight of drilling progress, productivity, and safety, • Work closely with drill crews and field teams to ensure accurate sample handling, • Maintain organized records and documentation of logging activities, • Experience managing or working around drill rigs and exploration programs preferred, • Strong preference for candidates with experience in copper sulfide deposits, • Experience using XRF sensors strongly preferred, • Ability and willingness to work outdoors in field conditions and in a core shed, • Early-career geologists seeking meaningful field experience, • Field technicians looking to expand exploration and geotechnical logging experience, • Opportunity to work on an active, long-duration drilling program, • Hands-on exposure to exploration geology and drilling operations, • Competitive compensation with travel expenses and per diem provided If you're motivated, field-ready, and eager to grow your experience in exploration geology, we encourage you to apply. Must be authorized to work in the United States without visa sponsorship.

Job DescriptionBenefits: • Flexible schedule, • Free uniforms, • Opportunity for advancement We provide: • Year-round stable, steady work, • Regular work hours, • Flexible scheduling, • Company van and/or cover related expenses such as gas, oil changes, etc. *varies by location., • TruBlue t-shirts, polos, and other company gear for the team We are looking for a seasoned Team Leader with the following experience: • Bathroom upgrades / remodel, • Drywall repair / patching/ caulking, • Flooring repair and installation, • General carpentry, • General home repairs and handyman work, • Kitchen repair / remodel, • Minor plumbing and electrical, • FAMILY Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family!, • INTEGRITY Treating people with respect and looking for the same in return, everyone has a voice!, • TRUST Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US and speak fluent English. We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up!

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement House Doctors of Scottsdale is seeking an Apprentice / Jr. Handyman to join our team on a flexible, 1099 basis. This role is ideal for someone with 2+ years of experience who can perform basic handyman tasks and is eager to learn from more experienced technicians. As a 1099 independent contractor, youll have flexibility in your schedule while gaining valuable, hands-on training with the opportunity to grow into a full technician role. Key Responsibilities • Complete basic handyman services under supervision (light carpentry, drywall patching, painting, caulking, fixture installation, minor repairs)., • Assist experienced handymen on larger jobs preparing work areas, carrying tools, clean-up, and finishing touches., • Maintain a professional appearance and excellent customer service when on-site with clients., • Keep job sites and tools organized and clean., • Track your time and job details accurately., • Follow safety protocols and company quality standards. Qualifications • 2+ years of handyman, construction, or trade experience preferred., • Basic knowledge of tools, home repair methods, and safe work practices., • Willingness to learn and take direction., • Must provide reliable transportation., • Ability to lift up to 100 lbs. and perform physical labor., • Strong communication and customer service skills., • Must carry or be willing to obtain general liability insurance (1099 requirement). Contractor Details • 1099 Independent Contractor: You are responsible for your own taxes, insurance, and benefits., • Flexible Scheduling: Work assignments are based on availability and workload., • Growth Opportunity: Potential to move into a higher-level technician role with increased pay and responsibility., • Tools & Equipment: Basic hand tools required; House Doctors may provide access to specialized equipment as needed. Why Join House Doctors? • Gain valuable training and mentorship from experienced handymen., • Build your skills across carpentry, drywall, painting, electrical, and plumbing., • Flexible hours that fit your schedule., • Clear pathway for growth within the House Doctors system.

Get Set for the 2025-2026 School Year! Start the 2025–2026 school year strong. We're hiring now! Zen Educate is looking for Para Educators. If you're passionate about supporting students with special needs and want a full-time role where you can make a real impact, this could be your next step. Don’t wait, connect with a recruiter today and see how we can help you find the perfect role. Our Instructional Assistants are fundamental to a smoothly running classroom, providing practical support that allows teachers to focus on instruction, while also offering encouragement and guidance to students throughout the school day. Responsibilities • Assisting licensed staff in the classroom, • Aid students in meeting their individualized education plan (IEP), • Maintain a classroom environment that is conducive to learning, • Work with individuals and/or small groups when activities and assignments are presented, • Provide support for students in crisis, • Support students on outings by driving them into the community, • Utilize a variety of learning methods to enhance the student's learning experiences and support them as - needed, • Celebrate the students you’re working with Qualifications • 60 credits, Associates Degree, obtained a passing score on an appropriate ADE assessment, or ParaPro/Praxis Exam, • IVP Level 1 Fingerprint Clearance Card, • Experience working with children, • Applicants must have professional proficiency in English, • US Work Authorization - Zen Educate cannot provide sponsorship for an employment visa or relocation assistance at this time. Preferred Qualifications • Previous experience working in special education, • Behavioral Technician or PCA experience, • Crisis prevention (CPI) training, • CPR certification Salary: Pay: $18 - $22 per hour, paid weekly. Schedule: Monday to Friday, within hours of 7:30 am - 3:00/4:30 pm (no weekend work). Benefits: • Weekly pay, • Paid Sick Leave, • 401K (certain eligibility criteria) About Zen Zen Educate partners with public and charter schools across various school districts to build stronger school communities. Our team is committed to supporting educators with personalized job matches and ongoing mentorship at every step. Why Zen Experience True Transparency: We believe in clarity. Zen Educate provides upfront information about pay rates and assignments, so you always know where you stand. Ref: PHX-none-TA-September2025-182

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting Medical Laboratory Technicians (MLT) to support the VA Prescott, Arizona located in 500 AZ-89, Prescott, AZ 86301. Services will be delivered to both the Anatomic Pathology and Clinical Pathology divisions of the facility. Exceptional compensation packages with full benefits are available. Ansible Government Solutions, LLC (Ansible) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Perform high complexity analytical testing procedures as requested by a Medical Technologist within various sections of the department, including Chemistry, Hematology, Coagulation, Urinalysis, Microbiology, and Transfusion Medicine, • Prepare reagents and assist with monitoring inventory, • Be capable of troubleshooting instrument issues, • An Associate or higher degree in a related field from an accredited educational institution, or military MLT training and experience, • Completion of a medical technician practice program and certified as an MLT by the ASCP-BOC or AMT, • A minimum of one (1) year of experience within the last three (3) years - PREFERRED, • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR 58V3xY0hWi

Job DescriptionDescription: Why WCE Join a team that has your back. We hire techs who take pride in their work, support each other, and are ready to be the one customers count on when the heat is on (or the walk-in's down). For techs who want more. More stability. More respect. More Opportunity. Hard work and dedication are rewarded with the resources and backing needed for you to succeed. We train, support and invest in our techs, giving them the tools to build a stable career with room to grow. If you want to be a part of a team that has your back, this is the place to be. Why This Role Matters Facilities call us because downtime is expensive. When a fryer, combi, or ice machine dies at 5 pm, the shift is on the line. Your speed, accuracy, and communication turn breakdowns into uptime. That protects food safety and keeps crews serving. What You’ll Do • Diagnose and repair hot-side: fryers, ovens, griddles, steamers, dish machines, • Diagnose and repair cold-side: reach-ins, prep tables, ice machines, walk-ins, • Work independently in the field - but stay tight with dispatch, parts, and fellow techs, • Use work-order video on every job to document, educate, and build trust, • Close the loop on quotes, clearly explaining issues and solutions to keep customers informed, • 2+ years commercial hot or cold equipment service with solid troubleshooting; multi-brand experience, • Strong electrical and gas diagnostics; refrigeration fundamentals for cold-side, • Comfortable running after-hours and weekend emergency calls when it's your turn on-call, • Professionalism and clear customer communication, • Brings a "whatever it takes" attitude to the job site, • Can work independently, but knows how to tag-team when the situation calls for it, • Treats customers with respect, keeps them informed, and makes their problem your mission Nice-to-haves • CFESA, EPA (Required for Cold-Side), OEM certs; light HVAC experience How We Work (the WCE way) • Communicate relentlessly ? every job gets work-order video proof + clear next step, • Own everything ? if you touch it, you close the loop, • One team ? protect the customer and each other, • Endlessly improve ? grow skills, grow pay, • Change the standard ? be the reason the customer calls us first + be the tech others look up to, • Enjoy the journey ? we hustle, we laugh, we respect each other, and we make every day count Pay & Perks Based on experience, hustle, and leadership capability Tech Level 3 ($25–$29) Tech Level 4 ($29–$34) Tech Level 5 ($34–$40) Tech Level 6 ($38–$45) • 100% company-paid medical, dental & vision insurance, • Annual merit increases, • Generous PTO with rollover up to 125%, • 401(k) with company match, • Life and disability insurance, • Monthly & annual recognition raffles, • Annual tool allowance & replacement, • Company vehicle & free uniforms, • Gas/corporate cards for business expenses, • Smooth, tech-driven in-house dispatch, • Room to grow, learn, and earn more, • Free leadership, finance & soft-skills courses Growth Clear, published skill matrix tied to pay steps. Master a lane, get certified, move up. Ready to Be the One They Call When the Kitchen's Down? We don't just fix equipment - we save the day for chefs, GMs, and owners when everything's on the line. Apply today - and we'll get back to you within 48 hours. Requirements:

Job Description This family owned and operated HVAC contractor in Southern Arizona seeks technicians to join our team! We are looking for passionate and experienced technicians in the commercial field for service, repair and install. We are looking for a candidate with a minimum of 7-8 years of experience since this position is in field working with other technicians who are multiskilled in this demanding field. You have a unique opportunity to join a small yet diverse team before summer hits hard. With May month already in motion, we want to hit the ground running with vetted technicians who understand the industry of commercial HVAC needs. We only have room for 1 position for this year, so we expect the employee to be able to know the job and execute the work. This position is located in Tucson, AZ and we service about 100 mile radius for job sites. Responsibilities • Visit our clients' businesses to troubleshoot, diagnose, install, and repair their heating and cooling systems, • Complete commercial HVAC work & repair orders in a timely fashion, • Estimate time & extent of repairs, • Perform routine preventive maintenance, • Maintain material & supply inventory, • Rotating on-call schedule and overtime during peak seasons, • Represent yourself consistent with Zona Mechanical standards for punctuality, experience, and appearance, • Work is performed while standing, sitting and/or walking, • Requires local travel as necessary, • No upsell requirement Qualifications • Must have a minimum of 7 years professional work experience as a Commercial HVAC Technician, • EPA license - Universal, • High school diploma or equivalent, • Valid driver's license, • Clean driving record, • Ability to pass a background check and drug test, • Excellent communication and customer service skills, • Ability to work independently, includes organizational and time-management skills, • Computer literate with email capability, MS Office/Google Suite, phone application abilities and related business and communication tools, • Additional Experience a plus, but not required, • Familiarity with MSHA certifications (must be willing to obtain within 30 days of hire), • HVAC technicians can often spend their time bending, crouched, or leaning on their knees as they install and work on different types of equipment, • Requires the ability to communicate effectively using speech, vision and hearing, • Requires the use of hands for simple grasping and fine manipulations, • Requires bending, squatting, crawling, climbing, reaching, • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds, • Industry-competitive base wage (pay based on qualifications & experience), • Continual Training, • Company provided vehicle with take home availability, • Gas card provided, • Company provides all major tools needed for jobs, • Work boot voucher, • Company provided mobile phone, • Benefits package:, • Time off - PTO, Vacation, Holiday, Sick, • Health insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Retirement plan options with a company match up to 3%, • Weekly pay Company DescriptionZona Mechanical started with a notion of developing value within a business by taking care of their employees who in turn take care of their customers. To achieve this vision Zona Mechanical knew the following requirements needed to be met: Quality technicians & installers Longer term relationship building with customers and employees Cost effective solutions Zona Mechanical prides themselves in maintaining safety regulations and ongoing training in the HVAC/R industry.Zona Mechanical started with a notion of developing value within a business by taking care of their employees who in turn take care of their customers. To achieve this vision Zona Mechanical knew the following requirements needed to be met:\r\n\r\nQuality technicians & installers\r\n\r\nLonger term relationship building with customers and employees\r\n\r\nCost effective solutions\r\n\r\nZona Mechanical prides themselves in maintaining safety regulations and ongoing training in the HVAC/R industry.

Job Description Founded in 1984, Firetrol is the national leader in fire protection & life safety services. We are currently seeking skilled Sprinkler Helpers to join our team of over 1,200 of the best fire protection professionals in the industry. Our Phoenix and surrounding areas are growing and we will have multiple opportunity’s coming available this year. These openings are in Austin, Texas. • Assist with the installation of fire protection systems under direct supervision of a responsible Lead Technician., • Similar trade experience a plus., • High School diploma or equivalent is required., • Must possess or be willing to obtain any applicable state licenses. Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, a generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally Firetrol sponsors training and education opportunities. Most importantly, Firetrol offers career growth opportunities, not just a job.

Job DescriptionKey Responsibilities: * Respond to roadside and on-site service calls using a fully equipped service truck. * Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial. * Diagnose and repair tire-related issues and perform light mechanical repairs as needed. * Inspect tires and wheels for wear, damage, and proper inflation. * Perform fleet inspections and preventative maintenance checks when required. * Operate tire pressure monitoring systems (TPMS) and other diagnostic tools. * Maintain the service truck, tools, and equipment in safe operating condition. * Follow DOT regulations, company safety policies, and traffic laws at all times. * Provide exceptional customer service, including clear communication of service details and timelines. * Assist with warehouse or shop duties when not on service calls. Skills / Education / Requirements: * Must be at least 18 years of age. * Must pass a pre-employment drug screen. * Valid driver’s license with an acceptable driving record (CDL preferred but not required). * Experience with heavy-duty/commercial tires preferred, but not required. * Ability to lift and move tires weighing 30–250 lbs., with or without mechanical assistance. * Capable of working independently in various weather and road conditions. * Strong problem-solving and customer service skills. Benefits: * 401(k) with Company Match * Health Insurance * Dental, Vision, and Life Insurance * Paid On-the-Job Training * Career Advancement Opportunities Why Join Southern Tire Mart? * * #1 Commercial Tire Dealer in the U.S. since 2008 * #1 Truck Retreader in North America since 2007 * #1 North America Commercial Tire Dealer since 2012 * Family-owned company with a focus on safety, service, and employee growth

Job DescriptionBenefits: • 401(k) matching, • Company parties, • Dental insurance Valley Tree Care is building an extraordinary Irrigation Division, and we looking for a seasoned Irrigation Technician to join our team! You will have an incredible opportunity to grow your skills in the art of irrigation throughout the Phoenix Valley. It is an exciting opportunity to be able to help shape and influence the trajectory of a brand new division within a fast growing and established organization. We are a tight knit, rapidly growing family owned company with 3 generations and 27 years of experience in the tree care industry. We believe strongly in investing in our culture and team members as we strive to revolutionize our industry with exceptional and innovative services! By actively cultivating our team, we are better equipped to care for our clients by caring for their trees. Apply today! Compensation: $23 - $25 / hour depending on qualifications and experience Location: Lot in North Phoenix - Happy Valley & I17, Service Valley Wide Requirements: • Growth oriented, proactive, problem solving, and professional., • Proven experience in irrigation system design and installation (minimum 2 years preferred)., • Expert knowledge of manual, automatic and computerized irrigation systems and water conservation practices., • Strong dedication to safety., • Driven and self-motivated, as you will be working alone the majority of the time., • Valid drivers license and clean record (REQUIRED), • Irrigation Certifications: A plus, but not required., • Company will assist you in obtaining Irrigation Certification, if you arent certified already.Job Description:, • Help design irrigation systems., • Setup and program irrigation controllers., • Inspect, repair, audit, maintain and install irrigation systems., • Cut, thread, weld, install and repair various pipes used in irrigation systems., • Design and set up low voltage lighting systems., • Primarily working with high-end residential properties., • Dental insurance, • Health insurance, • Paid time off, • Company holidays, • 401(k)Job Type: Full-time Pay: $23.00 - $25.00 per hour Expected hours: 40 per week Schedule: • 10 hour shift, • Monday to FridayExperience:, • Irrigation: 2 years (Required)License/Certification:, • Driver's License (Required)

Job DescriptionDescription: $17.00/hr starting pay, increases to $19.00/hr after successful completion of probationary period. (Applicant understands this is an entry level position and some key components of the successful completion of the probationary period are: attendance, behavior and learning ability). Summary: Cutter Aviation is currently searching for an energetic and knowledgeable member of our Line Service team. The Line Service Technician (LST) must be an exceptional relationship builder with the drive to provide world-class customer service with respect to activities on the ramp and interfaces with customers, pilots, passengers, senior staff and regulatory agencies. Key Duties • Fueling aircrafts., • General system servicing and cleaning., • Drive refueling trucks and towing equipment., • Solicit sale of new or additional services or products., • Towing and repositioning aircraft in and out of hangar., • Use of proper FAA and TSA rules and regulations are followed., • Assisting passengers and pilots with luggage Load and unload and transportation needs., • Record numbers of units handled and moved, using daily production sheets or work tickets., • Connect hoses and operate equipment to move liquid materials into and out of storage tanks on vessels., • Read work orders or receive oral instructions to determine work assignments and material and equipment needs., • Confer with customers in person in order to provide information about products and services, to take orders, or to obtain details of complaints., • Perform airfield management activities, which may include escorting passengers and or crew-member’s airfield via different traveling modes i.e. walking or driving of company vehicle. Driving of passengers and or crew members on and off airfield to designation i.e. hotel, main airport, aircraft. etc., • Ability to lift 50 lbs., • Basic computer and keyboarding skills., • Ability to calculate figures and amounts., • Ability to work in a fast-paced environment., • Professional in appearance and mannerisms., • Desire to be part of a team. Able to develop a friendly rapport., • Ability to work outdoors in various conditions including heat, rain, dust, noise, and cold., • Preference given to candidates with one or more years’ experience working at an FBO., • Attention to Detail. Persistence in the face of obstacles., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done., • Applicants selected for employment will be required to pass a pre-employment drug screening and background check. Clean driving record required.

Job Description We are currently seeking an Automotive Service Technician to become an integral part of our team! You will diagnose, adjust, and repair automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle repairs and maintenance, • Provide labor and time estimates for automotive repairs, • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented

Job Description Powell is a manufacturer of switchgear and other electrical equipment. Our Service Division is seeking a Circuit Breaker Technician in Queen Creek, AZ! Four 10s Schedule: Monday-Thursday 6:00am-4:30pm Position Summary As a top player in Switchgear and E-house Manufacturing and field servicing, a career with us will challenge you to solve some very tough problems. You will be rewarded with growth, personal development & industry expertise. At Powell, we provide a comprehensive salary package, extensive benefits and job training all within a professional & friendly working environment. Provide remote technical assistance and hands-on troubleshooting, repair, and testing of medium voltage electrical distribution equipment. Essential Responsibilities * Build, refurbish, rebuild, repair, & test various types of circuit breakers, contactors, grounding devices, and other electrical distribution equipment. * Refurbish previously sold equipment incorporating the latest design enhancements to increase mechanical and dielectric capabilities * Test the equipment per applicable IEEE/ANSI and Powell Factory Acceptance Testing Standards * Electrically and mechanically upgrade customer equipment to perform at ratings not previously purchased for such as changing control voltage, increasing continuous current ratings or adding under voltage or second trip devices. * Work with and provide remote technical assistance with internal and external customers to troubleshoot field orders. * Provide remote technical assistance to internal and external customers. * Incorporate current and future enhancements into older models of Powell equipment. * Provide safe and clean working environment. * Interpret Powell electrical schematics and wiring diagrams. Retrieve and print drawings from Powell database. * Relationships * Reporting to Breaker Department Manager * Internal relationships include regular interaction with: Project Management, Sales, and Quality Assurance Minimum Qualifications • Minimum education level of a High School Diploma or General Education Diploma is preferred., • Demonstrated understanding of basic electrical theory, safety, and applications., • Demonstrated proficiency with computer skills using Oracle, MS Outlook, Word & Excel, • Working knowledge with using the following test equipment: Hi-Potential Test Set, Insulation Resistance Test Set, Multi-meter, dial caliper., • Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability., • Must have strong verbal and written communication skills. This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. You should be proficient in: • Electrical Troubleshooting, • Electrical Repair, • Switchgear, • Motor Control Centers (MCCs)

Job Description This position is related to the commecial construction installation department. This is NOT a service technician position. We are seeking a skilled and experienced Refrigeration Installers/Technicians to join our team. The ideal candidate will be a proactive problem-solver responsible for the installation and start-up of refrigeration systems in commercial and residential settings. Duties • Conduct routine maintenance on refrigeration systems, • Diagnose and repair malfunctions in refrigeration systems, • Install new refrigeration systems as needed, • Perform preventative maintenance tasks on a regular basis, • Ensure all work meets safety standards and regulations, • Keep accurate records of work performed Requirements • Proven experience as a Refrigeration Technician or similar role, • Knowledge of mechanic principles and equipment repair, • Experience with air conditioning systems is a must, • Field service experience preferred, • Proficiency in using tools such as ohmmeters, • Valid driver's license with a clean driving record for van driving duties, • Ability to work with DX Systems and understand design specifications -Training in VRF Systems is preferred Job Type: Full-time Work Location: In person

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: * Competitive Starting Pay * Paid Training * Global Advancement Opportunities * Company Vehicle (as applicable) * Referral Bonuses * Comprehensive Benefits * Medical/Dental/Vision insurance * Health Savings Account (HSA) * Life Insurance * 401(k) savings plan with company match * Short-Term and Long-Term Disability * Employee Assistance Program * Wellness Program * And More! What you will do * Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctions. * Responsible for contacting customer representative and ascertain equipment/systems problems. * Diagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sites. * Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment. * Service, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnell. * Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals. * Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction. * Complete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computers. * Obtain customer signature upon completed service call assignment. * Participate in a scheduled On-call rotation. Help to train or mentor others on the service team. * Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of service * Perform other duties as assigned. How you will do it * This skilled position involves troubling shooting and repairing installed systems. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing. * Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks. * Candidate must possess excellent written/verbal communication and outstanding customer service skills. * Position involves the programming of fire alarm, security, and access control system panels. * Experience CCTV and IT and IP networks a plus. * Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner. * On call and after hours work required on occasion at customer need. * Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. * Provide quotes to support recommendations and solutions. What we look for Required * 3 plus years’ experience with fire alarm, access control, security intrusion, sound and communications systems * Must be able to interpret blueprints, diagrams and specifications. * A good working knowledge of computers is necessary. * Ability to follow verbal and written instructions. * Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc * Ability to work flexible hours including weekends to meet customer requirements. * Overnight travel may be required. * Demonstrate a high level of customer service. * Maintain truck inventory to ensure timely response to customer needs. * Ability to adhere to, implement, and follow safety guidelines and procedures at all times. * Strong organizational skills, positive attitude, and an ability to learn quickly. * Possess a valid driver’s license and driving record that meets company requirements. * Retain any licenses that are required by National, State and Local codes. Preferred * Technical training preferred * NICET II preferred HIRING HOURLY RANGE: $23-29 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at

Primary City/State: Tucson, Arizona Department Name: Blood Svcs-BUMCT Work Shift: Varied Job Category: Lab Join one of Arizona's leading diagnostic labs at Sonora Quest, where your work directly supports life-saving medical testing and patient care. Whether you're beginning your lab career or bringing experience to the table, this role offers hands-on impact and career growth in a high-demand healthcare setting. Come do great work on behalf of better health! POSITION SUMMARY This position performs waived and non-waived tests as defined by CLIA '88 in an accurate and timely manner with supervision. Assists with department compliance with all pertinent laboratory accrediting agencies and regulatory requirements (e.g., CLIA '88, JCAHO, CAP, OSHA). Personnel report to department supervisor. May be responsible for the collection, receipt, and processing of biological specimens into the laboratory. Performs all functions according to established policies, procedures, regulatory and accreditation requirements, as well as applicable professional standards. KNOWLEDGE, SKILLS AND ABILITIES • Must exhibit personal maturity and responsibility., • Excellent reading, writing and math abilities., • Communicates effectively in oral and written formats sufficient to demonstrate comprehension., • Ability to perform detailed work; work with frequent interruptions, multi-task, problem solve and memorization., • Ability to take direction and assimilate instructions quickly., • Detail oriented and exceptional organizational skills., • Basic computer skills., • Must exhibit skills in exceptional customer service, good performance review and passing on-site competency evaluation and /or assessment as defined by the department. MINIMUM QUALIFICATIONS • Applicant must meet one of the following criteria to qualify:, • Associate degree in a laboratory science (chemical or biological science) or medical laboratory technology from an accredited institution, or, • Bachelor's degree in chemical or biological science (transcripts will be reviewed to determine eligibility)., • Equivalent laboratory training and experience meeting the requirements defined in the CLIA regulation 42CFR493.1489, or, • Meet other criteria defined in 42CFR493.1489 or 42CFR493.1491 (including US military medical laboratory procedures training courses), • Foreign educated candidates must provide a detailed credential evaluation from IERF (International Education Research Foundation) or other nationally recognized credentialing agency for review to determine eligibility and translated diploma., • Demonstrated competency in phlebotomy in departments where applicable. PREFERRED QUALIFICATIONS • MLT certification (ASCP, AMT, HEW, AAB)., • Basic knowledge of specimen requirements and knowledge of medical terminology., • Previous experience with phlebotomy and processing., • Additional related education and/or experience. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Primary City/State: Phoenix, Arizona Department Name: Anatomic Pathology-Ref Lab Work Shift: Evening Job Category: Lab Join one of Arizona's leading diagnostic labs at Sonora Quest, where your work directly supports life-saving medical testing and patient care. Whether you're beginning your lab career or bringing experience to the table, this role offers hands-on impact and career growth in a high-demand healthcare setting. Come do great work on behalf of better health! POSITION SUMMARY This is position is responsible for the receipt of biological specimens into the department, preparation of samples for analytical testing, and performing waived testing. This position reports to department supervisor, and may take direction from higher level technical personnel. This position assists the coordinator and supervisor in the functional operation of the histology section; insuring the continuity of daily workflow and prioritization of work, training of new employees as well as the maintenance and reporting of quality control and quality assurance systems and procedure manuals, solving technical problems, and research and development activities. This position is also responsible for performing all essential functions as defined by the department. In addition, performs waived and moderately complex tests as defined by CLIA '88 in an accurate and timely manner. This position may perform highly complex testing as defined by CLIA '88 under general supervision. Also, under general supervision, performs as a grossing processor taking direction from a Certified Pathologist Assistant. Receives, examines and processes Pathology specimens. In the absence of the supervisor or coordinator, this position provides overview support for the Anatomic pathology section. Performs all functions of AP Laboratory Technician. Also, may train employees on basic entry level tasks, performs QC/QA duties and serves as a resource. PHYSICAL DEMANDS/ENVIRONMENT FACTORS Standing or sitting for long periods of time,, comprehension of written and oral instructions in English, confidentiality, stress, mathematics, frequent interruptions, detailed work, routine problem solving and reasoning, computer skills, ability to multi-task, cross train, potential exposure to chemical, electrical and biological hazards, memorization, ability to distinguish colors, ability to take direction and assimilate instructions quickly, manual dexterity and positive communication skills. KNOWLEDGE, SKILLS AND ABILITIES • Maintains a safe, clean and organized working environment., • Ensures station is clean, stocked and disinfected at the end of the shift., • Ability to perform well in supervisor's absence, and provide guidance on issues relating to pre analytical, waived and moderately complex testing., • Ability to integrate the Company's Mission, Vision and Values and customer service standards in daily activities., • Must be able to react and adjust to daily workflow requirements as assigned by Supervisor., • Performs other duties as assigned. MINIMUM QUALIFICATIONS • Requires an Associate's degree and be eligible for ASCP HT registry OR ASCP HT registry OR a Bachelor's degree with Anatomic Pathology departmental-specific certification documentation within 6 months of hire date., • Must be willing to perform/cross train in all areas of the Anatomic Pathology section and have demonstrated competency in all aspects of work., • Must have highly developed interpersonal and communication skills. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Primary City/State: Phoenix, Arizona Department Name: Molecular Diagnostics-Ref Lab Work Shift: Night Job Category: Lab POSITION SUMMARY This position performs waived and non-waived tests as defined by CLIA '88 in an accurate and timely manner with supervision. Assists with department compliance with all pertinent laboratory accrediting agencies and regulatory requirements (e.g., CLIA '88, JCAHO, CAP, OSHA). Personnel report to department supervisor. May be responsible for the collection, receipt, and processing of biological specimens into the laboratory. Performs all functions according to established policies, procedures, regulatory and accreditation requirements, as well as applicable professional standards. CORE FUNCTIONS 1. Performs testing in an accurate and timely manner according to established policies and performance standards with a knowledge level determined for that testing. Responsible for startup, calibration and accuracy of procedures and instrumentation. Exercises independent judgment and can identify appropriate resources in performance of assigned duties utilizing knowledge and skills. Demonstrates comprehension of theory and clinical relevance of testing. Demonstrates problem resolution and decision-making skills for routine operational and technical problems. Demonstrates knowledge of computer systems used in the department and can perform basic troubleshooting of computer problems. Demonstrates awareness and complies with accrediting agency and regulatory requirements related to area of responsibility., 2. Recognizes and ensures validity of abnormal patient and/or QC results for testing. Ensures accuracy of test results. Participates in detecting and documenting occurrences that deviate from defined procedures. Demonstrates appropriate resolution and follow through for problem solving identified during testing. Promotes and consistently meets department standards for productivity and quality, 3. Ensures the appropriate use of supplies and materials and assists with inventory management. Ensures efficient utilization of reagents and supplies. Recognizes and provides input towards opportunities for improvements in financial performance to decrease costs, improve productivity, and improve service., 4. Self-directed and motivated to contribute to projects identified by the supervisor. Seeks out opportunities to identify projects relating to department needs. Active in training of laboratory personnel. Performs well in supervisor's absence and provides guidance on issues relating to pre-analytical, waived and non-waived testing. Completes all required training modules., 5. Communicates courteously, professionally, effectively and accurately with internal and external customers. Participates in the resolution of communication issues. Knows and utilizes appropriate resources for increased levels of problem solving. Demonstrates good verbal and written communication skills. Promotes positive communications that enhances teamwork. Attendance and participation at staff meetings., 6. May process and prepare patient samples as required which can include the following: 1) specimen collection 2) general laboratory specimen processing and 3) referral laboratory processing. In doing so, ensuring correct patient and specimen identification and specimen integrity. KNOWLEDGE, SKILLS AND ABILITIES • Must exhibit personal maturity and responsibility., • Excellent reading, writing and math abilities., • Communicates effectively in oral and written formats sufficient to demonstrate comprehension., • Ability to perform detailed work; work with frequent interruptions, multi-task, problem solve and memorization., • Ability to take direction and assimilate instructions quickly., • Detail oriented and exceptional organizational skills., • Basic computer skills., • Must exhibit skills in exceptional customer service, good performance review and passing on-site competency evaluation and /or assessment as defined by the department. MINIMUM QUALIFICATIONS • Applicant must meet one of the following criteria to qualify:, • Associate degree in a laboratory science (chemical or biological science) or medical laboratory technology from an accredited institution, or, • Bachelor's degree in chemical or biological science (transcripts will be reviewed to determine eligibility)., • Equivalent laboratory training and experience meeting the requirements defined in the CLIA regulation 42CFR493.1489, or, • Meet other criteria defined in 42CFR493.1489 or 42CFR493.1491 (including US military medical laboratory procedures training courses), • Foreign educated candidates must provide a detailed credential evaluation from IERF (International Education Research Foundation) or other nationally recognized credentialing agency for review to determine eligibility and translated diploma., • Demonstrated competency in phlebotomy in departments where applicable. PREFERRED QUALIFICATIONS • MLT certification (ASCP, AMT, HEW, AAB)., • Basic knowledge of specimen requirements and knowledge of medical terminology., • Previous experience with phlebotomy and processing., • Additional related education and/or experience. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Primary City/State: Phoenix, Arizona Department Name: Flow Cytometry-Ref Lab Work Shift: Day Job Category: Lab POSITION SUMMARY Performs specimen receipt, accessioning for all samples received in the Flow Cytometry department. Performs blood, bone marrow, fluid and tissue processing according to the defined SOPs. Performs instrument QC, start-up, shutdown, basic instrument and assay troubleshooting, monitors pending, receives supplies and reagents in the laboratory and related QA/QC procedures. Performs all functions according to established policies, procedures, regulatory and accreditation requirements, as well as applicable professional standards. CORE FUNCTIONS 1. Demonstrates an understanding of the computer systems used in the department necessary for performing assigned job tasks, including but not limited to NetLIMS, NovoPath, LabOS, instrument software, FreeView and Master Control., 2. Performs maintenance and QC checks on laboratory equipment including but not limited to instrument start up and shut down, as well basic troubleshooting., 3. Performs sample accessioning, resolves pending/missing sample issues, prepares paperwork for leukemia lymphoma testing according to department workflow and SOP., 4. Performs lymphocyte subset testing on the AQUIOS flow cytometer as well as lymphocyte subset testing washed panels for the Navios according to department workflow and SOP., 5. Performs specimen processing for peripheral blood, bone marrow, tissue and fluids. This includes cell counts using Sysmex, slide preparation and staining, immunophenotyping using the appropriate lysing technique, as well as acquisition of samples on the Flow Cytometers according to department workflow and SOP., 6. Communicates courteously, professionally, effectively and accurately with internal and external customers. Participates in the resolution of communication issues. Knows and utilizes appropriate resources for increased levels of problem solving. Demonstrates good verbal and written communication skills. Promotes positive communications that enhances teamwork. Attendance and participation at staff meetings., 7. Performs all functions according to established policies, procedures, regulatory and accreditation requirements, as well as applicable professional standards. Provides all customers of Banner Health with an excellent service experience by consistently demonstrating our core values and ethical behaviors each and every day. KNOWLEDGE, SKILLS AND ABILITIES • Knowledge and ability to operate centrifuge, pipettor, vortex, gravimetric scale, • Basic understanding and knowledge of laboratory software for the receipt and accessioning of samples, pulling pending lists, troubleshooting lost specimens., • Ability to learn instrument operation (AQUIOS, Navios, TQ-Prep, Prep Plus, Sysmex XN, Sysmex Xi, various centrifuges), review QC and determine if it is acceptable to run patient samples, • Ability to discern when assistance from leadership is needed., • Ability to clearly communicate and document laboratory issues to leadership, • Ability to work in a team environment, • Ability to learn from mistakes and receive feedback with positive intention MINIMUM QUALIFICATIONS • High School graduate or equivalent and successfully completed military training of 50 or more weeks and served as a medical laboratory specialist OR, an Associate's degree in any field with 20 hours of chemistry and/or biological sciences credits OR, three (3) years' experience working in a clinical laboratory or hospital environment as an MLT (ASCP)., • Demonstrates highly developed interpersonal skills. Proficient in basic computer skills. Demonstrates excellent problem solving skill, and high level of self-motivation., • Must exhibit personal maturity and responsibility., • Good reading, writing and math abilities. Communicates effectively in oral and written formats sufficient to demonstrate comprehension., • Able to perform detailed work and to work with frequent interruptions in a stressful environment, multi-task, problem solve and memorize., • Able to take direction and assimilate instructions quickly., • Good organizational skills and ability to maintain confidentiality. PREFERRED QUALIFICATIONS • Previous Flow Cytometry sample processing experience, • Associate's Degree in biology or clinical laboratory science or medical technology., • Two years training and experience in high-complexity testing, • Additional related education and/or experience. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Primary City/State: Phoenix, Arizona Department Name: Anatomic Pathology-Ref Lab Work Shift: Varied Job Category: Lab Join one of Arizona's leading diagnostic labs at Sonora Quest, where your work directly supports life-saving medical testing and patient care. Whether you're beginning your lab career or bringing experience to the table, this role offers hands-on impact and career growth in a high-demand healthcare setting. Come do great work on behalf of better health! POSITION SUMMARY This is position is responsible for the receipt of biological specimens into the department, preparation of samples for analytical testing, and performing waived testing. This position reports to department supervisor, and may take direction from higher level technical personnel. This position assists the coordinator and supervisor in the functional operation of the histology section; insuring the continuity of daily workflow and prioritization of work, training of new employees as well as the maintenance and reporting of quality control and quality assurance systems and procedure manuals, solving technical problems, and research and development activities. This position is also responsible for performing all essential functions as defined by the department. In addition, performs waived and moderately complex tests as defined by CLIA '88 in an accurate and timely manner. This position may perform highly complex testing as defined by CLIA '88 under general supervision. Also, under general supervision, performs as a grossing processor taking direction from a Certified Pathologist Assistant. Receives, examines and processes Pathology specimens. In the absence of the supervisor or coordinator, this position provides overview support for the Anatomic pathology section. Performs all functions of AP Laboratory Technician. Also, may train employees on basic entry level tasks, performs QC/QA duties and serves as a resource. PHYSICAL DEMANDS/ENVIRONMENT FACTORS Standing or sitting for long periods of time,, comprehension of written and oral instructions in English, confidentiality, stress, mathematics, frequent interruptions, detailed work, routine problem solving and reasoning, computer skills, ability to multi-task, cross train, potential exposure to chemical, electrical and biological hazards, memorization, ability to distinguish colors, ability to take direction and assimilate instructions quickly, manual dexterity and positive communication skills. KNOWLEDGE, SKILLS AND ABILITIES • Maintains a safe, clean and organized working environment., • Ensures station is clean, stocked and disinfected at the end of the shift., • Ability to perform well in supervisor's absence, and provide guidance on issues relating to pre analytical, waived and moderately complex testing., • Ability to integrate the Company's Mission, Vision and Values and customer service standards in daily activities., • Must be able to react and adjust to daily workflow requirements as assigned by Supervisor., • Performs other duties as assigned. MINIMUM QUALIFICATIONS • Requires an Associate's degree and be eligible for ASCP HT registry OR ASCP HT registry OR a Bachelor's degree with Anatomic Pathology departmental-specific certification documentation within 6 months of hire date., • Must be willing to perform/cross train in all areas of the Anatomic Pathology section and have demonstrated competency in all aspects of work., • Must have highly developed interpersonal and communication skills. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Primary City/State: Phoenix, Arizona Department Name: Anatomic Pathology-Ref Lab Work Shift: Varied Job Category: Lab Join one of Arizona's leading diagnostic labs at Sonora Quest, where your work directly supports life-saving medical testing and patient care. Whether you're beginning your lab career or bringing experience to the table, this role offers hands-on impact and career growth in a high-demand healthcare setting. Come do great work on behalf of better health! POSITION SUMMARY This is position is responsible for the receipt of biological specimens into the department, preparation of samples for analytical testing, and performing waived testing. This position reports to department supervisor, and may take direction from higher level technical personnel. This position assists the coordinator and supervisor in the functional operation of the histology section; insuring the continuity of daily workflow and prioritization of work, training of new employees as well as the maintenance and reporting of quality control and quality assurance systems and procedure manuals, solving technical problems, and research and development activities. This position is also responsible for performing all essential functions as defined by the department. In addition, performs waived and moderately complex tests as defined by CLIA '88 in an accurate and timely manner. This position may perform highly complex testing as defined by CLIA '88 under general supervision. Also, under general supervision, performs as a grossing processor taking direction from a Certified Pathologist Assistant. Receives, examines and processes Pathology specimens. In the absence of the supervisor or coordinator, this position provides overview support for the Anatomic pathology section. Performs all functions of AP Laboratory Technician. Also, may train employees on basic entry level tasks, performs QC/QA duties and serves as a resource. MINIMUM QUALIFICATIONS • Requires an Associate's degree and be eligible for ASCP HT registry OR ASCP HT registry OR a Bachelor's degree with Anatomic Pathology departmental-specific certification documentation within 6 months of hire date., • Must be willing to perform/cross train in all areas of the Anatomic Pathology section and have demonstrated competency in all aspects of work., • Must have highly developed interpersonal and communication skills. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Job Description: Essential Duties and Responsibilities. • Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation., • Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness., • Complete all tasks to the quality standards of AerSale, Inc., FAA and our customers' approved maintenance manual., • Perform work within estimated or budgeted hours., • Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments., • Ensures that AerSale, Inc. and customer aircraft maintenance documents are accurate and properly annotated., • Ensures documents are returned to the Technical Library and/or destroyed, as required, after jobs are complete., • Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess AerSale, Inc. operating certification., • Promote a culture of safety my monitoring self and others to assure all duties are performed within the guidelines as specified by the AerSale, Inc. Team Member Safety Manual., • Responsible for the proper execution of parts tags attached to repairable, serviceable or condemned parts., • Interface effectively with members of management, other departments and co-workers., • Keep own and adjacent work area clean, • Able to work any or all shifts. Education and Experience: • High school education or equivalent., • A&P License preferred and/or 2-10 years aircraft maintenance experience., • Must provide own tools as indicated on Company Tool List.

Job Description PLEASE NOTE - This position may require temporarily relocation to other TONHC Facilities: Sells Hospital, Santa Rosa Health Center, San Simon Health Center, and San Xavier Health Center. Position Summary: Maintain medical record information in manual and automated record systems. Reviews, analyzes, abstracts, and compiles data; compiles statistics; and performs routine clerical duties supporting the Tohono O'odham Nation Health Care. Scope of Work: The position is located in the TONHC Hospital and Clinics. The incumbent works under the general supervision of the Medical Records Supervisor. Essential Duties and Responsibilities: • Maintains medical records, creates patient charts and internal identification cards for new patients using unique identification numbers according to established protocols ensures accurate and up-to-date information., • Initiates medical records by searching master patient index; identifying existing patient records or assigns a new number; interacts with registration areas and physicians' offices for information verification; processes or creates the record folder., • Scans documents, clinical images, clinical tests, and other non-textual data into the patient's electronic medical record., • Retrieves patient charts; notes their removal and temporary location, and later re-files them in proper sequence., • Prepares chart conversion; consolidates charts, repairs, or establishes new charts as needed., • Locates records that have been checked out or are missing., • Files documents in the proper patient's record and the appropriate order of assembly received from clinical personnel, including outside providers/facilities., • Completes daily chart review to ensure patient records are scanned and filed before the patient's scheduled appointment., • Provides necessary forms to patients requesting their medical records; response to questions and patient concerns., • Verifies requests, pull, prepares, and copies medical records to be released according to established policy and procedure, legal, and regulatory guidelines., • Maintains all medical release forms and enters data into RPMS., • Provides medical record information by answering questions and requests of patients, hospital staff, law firms, insurance companies, and government agencies; releases information based on policy and procedures., • Schedules and checks patients in and out., • Registers and assists patients with setting up their PHR Account., • Manages internally and externally generated DICOM and non-DICOM medical images., • Reviews, purges, and prepares files for shipment for record retention; updates control logs., • Maintains patient confidence and protects hospital operations by keeping information confidential, following release-of-information protocols., • Prepares and submits reports., • Contributes to a team effort and accomplishes related results as required., • Knowledge of the Tohono O'odham culture, customs, and traditions., • Knowledge of applicable federal, state, tribal laws, regulations, and requirements., • Knowledge of computer software, including word processing, database, and spreadsheet application., • Knowledge of legal regulations and requirements on confidentiality, specifically to the Privacy Act of 1974 and Health Insurance Portability and Accountability Act of 1996 (HIPAA)., • Knowledge of medical terminology and usages, covering the full range of general medical, surgical, pharmaceutical, hospital terms, medical abstracts, and abbreviations., • Knowledge of the Freedom of Information Act (FROIA)., • Knowledge of performance improvement activities and tools to participate with the Quality First team in identifying and improving processes., • Knowledge of Resource Patient Management Systems (RPMS) and related systems., • Knowledge of medical record organization., • Skill and commitment to accuracy and detail., • Skill in providing superior customer service to external and internal customers., • Skill in operating various word-processing, spreadsheets, and database software programs., • Skill in organizational and office technology., • Ability to retrieve and maintain the terminal digital filing system., • Ability to utilize imaging systems., • Ability to carry out instructions furnished in verbal or written format., • Ability to communicate efficiently and effectively both verbally and in writing., • Ability to exercise independent judgment., • Ability to handle multiple tasks and meet deadlines., • Ability to interact and maintain good working relationships with individuals of varying social and cultural backgrounds., • Must have completed a Medical Terminology course., • RPMS experience preferred., • Upon recommendation for hire, a criminal background and a National FBI fingerprint check are required to determine suitability for employment, including a 39-month driving record., • May require possessing and maintaining a valid driver's license (no DUIs or major traffic citations within the last three years)., • If required, must meet the Tohono O'odham Nation tribal employer's insurance requirements to receive a driver's permit to operate program vehicles., • Based on the department's needs, incumbents may be required to demonstrate fluency in both the Tohono O'odham language and English as a condition of employment.

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Job Description: Essential Duties and Responsibilities: • Perform work assignments as determined by the shop management., • Ensures that all work is performed in accordance with approved technical data, to customer supplications and regulatory requirements., • Uses appropriate inspection techniques, and calibrated equipment for the unit/part being accomplished., • Utilizes the proper test equipment or suitable alternative and perform preventative maintenance as needed., • Records information and accomplishes the work assignment in compliance with the Inspection Procedures Manual and - Quality Policies and Procedures., • Assist Department Manager and Engineers with new capability development of repairs received, • Maintain open two-way communication with Manager and team mates appropriately sharing both good and bad news, • Provide timely quotes of units maintaining gate 1 three days and gate 3 three days, • Maintain personal and shop calibrated tools is satisfactory operational condition., • Comply with all safety directive and maintain a clean and safe work environment., • Ability to work in a shop environment with the ability to lift 100 lbs., • Ability to read and interpret schematics and drawings. Relationships: • Reports to Department Manager, • Daily interaction with Quality Inspectors, Engineers and buyers., • Daily interaction with internal departments Travel Requirements Education and Experience: • High school diploma GED, • FCC certification, • 2-10 years of combined bench or line experience working on Avionics components. Performing teardown, inspection, parts requisition, assembly, testing, troubleshooting, repair and overhaul of aircraft Avionics components. ADF, Radio altimeter, VHF, HF, VOR/ILS, Radar, DME, Transponders, Steering computers, Instrument amplifiers, Radar indicators, Digital air data computers, Baro rate computers, Gables panels, Power transformers and Antennas. Extensive knowledge of Avionics components is required for this position., • A&P License. (Preferred), • FCC certification (Preferred), • Associate degree in Electronics, • 2 Years aviation Avionics experience, • Associate degree, • Previous work experience may be considered., • Knowledge of and the ability to operate various test equipment. Scopes, analyzers and flukes., • Strong analytical and troubleshooting skills Skills and Abilities: • Must be multi-task/project oriented with the ability to work under pressure in a fast-paced industry meeting established timelines., • Excellent verbal, writing, listening and interpersonal skills to interact with all functional levels of internal contacts., • Detail orientated and organized., • Computer literate. and proficient with Microsoft Office programs (Outlook, Word and Excel), • Willing to work additional hours when operational objectives require it., • Strong analytical and decision-making skills with ability to exercise informed risk taking in order to make judgment calls, • Ability to prioritize and to work without close supervision. Physical Requirements • While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull, stack, reach above shoulder level or carry light-weight materials. Safety Hazards of the job • Exposure to hazardous chemicals, abrasive blast residue, paint fumes, high pitch sound may occur., • Personal Protective Equipment required in specified areas.

Job DescriptionJob Description As an Instructional Assistant with The Menta Education Group, you will be responsible for working with classroom instructors and staff to offer targeted teaching and support to students in the classroom, as well as general support for all students in the school. Location: Southwest Education Center, Casa Grande, AZ Staff Hours: 7:30 a.m.. to 3:00 p.m., Mon-Fri, following a 10 Month School CalendarBenefits & Paid Benefit Time Off Responsibilities • Provide academic support within the classroom, • Manage classroom behaviors, • Report behavioral concerns of students to appropriate staff, • Implement and maintain behavioral program policies and data, • Maintain classroom order and safety (Security), • Provide general supervision of students inside the school setting, • Assist in the prevention and management of incidents of non-compliance and/or escalation in behavior, • Maintain alertness for problems likely to disrupt the educational process or to be a safety concern and correct and report these conditions Respond to emergency situations, • Provide interventions to students to assist in managing behaviors, • Think quickly, independently, and tactfullyQualifications, • Registered Behavior Technician, Youth Worker, Mental Healthcare Technician, or ABA Technician experience is helpful., • Substitute Teacher Certification or Bachelor's Degree preferred, • Security or Juvenile Justice background is helpful, • Military Veterans are encouraged to apply, • Ability to operate tactfully under stress, • Flexibility to change in routines, • At least 23 years of age, • Able to work with high-risk special needs students, • Good driving record and willing and able to drive student van is strongly preferredBenefits, • Medical, Dental, & Vision Benefit Plans, • 10 Month School Position with 12 Month Semi-Monthly Pay (if sub-certified), • Generous Paid Time Off Benefits

Job Description We are looking for enthusiastic individuals to join our team as Behavior Technicians. As a Behavior Technician, you will have the opportunity to make a real difference in the lives of children with autism. In this role, you will work one-on-one with children, implementing individualized behavior intervention plans under the guidance of a Board Certified Behavior Analyst (BCBA). You will use evidence-based techniques to teach communication, social, and daily living skills while reducing interfering behaviors. We are looking for candidates who are passionate about helping children with autism reach their full potential. You will need to be patient, compassionate, and able to work well in a team environment. We will provide comprehensive training so that you are equipped and empowered to help each child, even if you don't currently have experience. Children can be unpredictable and potentially confrontational, so this role is not for the weak of spirit, mind, or body. Part of the joy of working with kids is exercise! Our clients move, so you need to be comfortable standing, walking, sitting, grasping, reaching, bending, kneeling, crouching, squatting, lifting, and at times carrying children or objects that weigh up to 50 pounds. At the end of each day, you will go home knowing that you have made a meaningful impact on the life of a child and their family. Join us and become a part of a dedicated team that is changing lives for the better. Apply now to start your journey as a Behavior Technician with us! Pay Range: $18-24 Requirements: • Passionate about helping children with autism, • Patient, compassionate, and able to work well in a team, • 18+ years of age, • High school diploma or GED, • Ability to obtain a CPR, First Aid Certification and Tuberculosis test (if you haven't had one in the last year), • Ability to pass a pre employment background check, • Ability to move in various positions (sit, squat, bend, etc.), • Ability to lift and carry up to 50 pounds Additional qualifications (not required): • Structured career path in the field of Behavioral Analysis, • Discounts to hundreds of retail partners via our Benefit Hub, • Access to Centria's Employee Assistance Plan with benefits around mental health and counseling, • Early wage access to employees through Rain - Work today, get paid tomorrow!, • Unlimited opportunities to make an impact in the life of a special needs child We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, Veteran status, or disability status. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities, or working conditions associated with the position. This pay scale range is the full range of potential wages Centria Autism reasonably expects to pay for employees with this job title and this pay scale range varies dependent on job qualifications, performance, experience, and/or seniority. This range should not be interrupted to mean that Centria Autism currently employs any employees with this job title at the bottom or top of the pay scale range. Centria reserves the right to amend this job description at any time, with or without written notice.

Job Description PLEASE NOTE - This position may require temporarily relocation to other TONHC Facilities: Sells Hospital, Santa Rosa Health Center, San Simon Health Center, and San Xavier Health Center. Position Summary: The purpose of the position is to augment the regular laboratory workforce by allocating some of the more routine duties of the medical laboratory technologist and technician to this position (e.g., drawing blood). Scope of Work: This position is located within TONHC on the Tohono O'odham Nation. The incumbent will perform miscellaneous tasks, including phlebotomy, transporting patients, clerical, and "order entry" duties. The incumbent obtains test results for use by the primary care provider, initiating CPR when indicated, answering telephones, and directing telephone calls; observing safety practices for the benefit of patients, staff, and visitors; cleaning, and following isolation procedures. Essential Duties and Responsibilities: (Depending on the area of assignment, an incumbent may not be required to perform some of the duties listed below): • Performs a range of diagnostic support duties that include age-specific patient assessment to draw blood specimens from inpatient and outpatient patients., • Ensures that blood samples drawn are in the proper tube, labeled correctly, and properly identified., • Makes gross and subtle visual observations of the patient's condition, taking all necessary precautions against infection and adverse reactions of patients., • Provide education to patients on specimen collection procedures., • Perform finger sticks for lab studies utilizing appropriate aseptic techniques., • Performs venipuncture to obtain lab specimens according to provider orders on an assigned basis utilizing the appropriate aseptic technique., • Correctly labels specimens with the time and the place obtained. Delivers the samples to the laboratory using the appropriate accessioning procedure., • Safely transports multiple specimens to the laboratory according to medical center policy., • Properly identifies the patient. Remains with the patient until they can leave either to the clinic or to their final destination., • Performs patient transport duties, including transferring the patient to and from a wheelchair or stretcher from the department or other areas of the hospital or clinic., • Answers the phone and directs calls to the appropriate individual. Takes complete messages and promptly delivers to appropriate personnel-contacts other disciplines and services as required., • Cleans areas within the department and restocks needed supplies at appropriate levels. Routinely orders proper supplies from warehouse, • Completes and assures that the appropriate documentation captures the workload., • Perform "order entry" duties from provider test order requisition., • Participates in maintaining a clean, safe environment. Removes defective equipment, reports hazards, observes- safety regulations, adheres to infection control policies, and utilizes proper aseptic techniques to perform duties., • Attends planned in-service programs, including fire and safety training and CPR certification training as directed., • Knowledge of the Tohono O'odham culture, customs, and traditions., • Knowledge of Health Insurance Portability and Accountability Act of 1996, Public Law 104-191 (HIPAA)., • Knowledge of the Privacy Act of 1974 mandates the incumbent to maintain the confidentiality of all administrative, medical, and personnel records., • Knowledge of first aid procedures and the ability to recognize adverse patient reactions., • Knowledge and skills are sufficient to correctly identify and obtain equipment and supplies and communicate proper use with patients, family members, and staff., • Skill to properly collect blood specimens using a variety of collection procedures and aids. Knowledge of specialized and appropriate specimen tube requirements and preservation requirements to maintain specimen integrity before testing., • Ability to take various samples such as sputum or urine samples, seal samples for analysis by others, conduct the age-specific patient assessment, and record results; this typically includes explaining the patient's role in the procedure to the patient., • Ability to perform clerical duties, including typing and advanced functions with various types of software to comply with multiple medical centers' initiatives, including regulatory compliance and accreditation requirements., • Ability to perform "order entry" duties from the "provider test order requisition" module., • The incumbent must exercise considerable skill and tact in dealing with patients and be sensitive to their needs.Minimum Qualifications:, • High School Diploma or General Education Diploma., • One year of work experience in the medical, health, or a related field; or completed one year of study in medical, health, or a related field. Licenses, Certifications, Special Requirements:, • Must complete the medical center training program in "Order Entry.", • Upon recommendation for hire, a criminal background and a National FBI fingerprint check are required to determine suitability for employment, including a 39-month driving record., • May require possessing and maintaining a valid driver's license (no DUIs or major traffic citations within the last three years)., • If required, must meet the Tohono O'odham Nation tribal employer's insurance requirements to receive a driver's permit to operate program vehicles., • Based on the department's needs, incumbents may be required to demonstrate fluency in both the Tohono O'odham language and English as a condition of employment.

Job Description It’s your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career minded aviation professionals who will support our vision and goals. Built on a foundation of Respect, Safety, Quality, and Results, we are looking for a skilled and motivated NDT Technician (Level II). The Level II Technician will be performing calibrations, Non-destructive Tests, and evaluations for acceptance or rejection determinations according to written instructions and record results. Level II Technician will be qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards, and specifications. Level II Technician will be thoroughly familiar with the scope and limitations of the method of NDT being used and should exercise assigned responsibility for on-the-job training and guidance of assistants and Level I Technicians. Level II Technicians organize and report the results of NDT. As a 24/7 operation, we have openings across all shifts—including standard day shifts, 2nd shift, weekend shifts, and 12-hour shifts. Candidates must be flexible and willing to be assigned to any shift based on operational needs. DUTIES/RESPONSIBILITIES: • Research technical data and examines the structure and components of an aircraft for defects on the surface, inside the material, or hidden by other structures in accordance with applicable maintenance manuals, FAA regulations and Ascent Aviation policies and procedures., • Set up and calibrate nondestructive testing equipment., • Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations., • Conducts eddy current, penetrant, ultrasonic, and magnetic particle tests on metal parts to determine if parts meet nondestructive specifications, • Reviews test orders to determine type of test requested, test procedures to follow, and part acceptability criteria., • Applies agents such as cleaners, penetrants, developers to parts, or heat-treated parts to prepare for testing., • Determines test equipment settings according to type of metal, thickness, distance from test equipment, and related variables, using standard formulas., • Calibrates test equipment such as magnetic particle, and ultrasonic contact machines, to standard settings, following manual instructions., • Sets up equipment to perform tests, and conducts tests on parts, following procedures established for specified tests performed., • Examines surface-treated materials during penetrant and magnetic particle tests to locate and identify cracks or other defects using black light., • 401K with Company Match, • Medical/Dental/Vision Insurance, • PTO - Eligible for 3 Weeks in your First Year, in Addition to 7 Paid Company Holidays, • Company-Provided Short-Term Disability, Long-Term Disability, and Life Insurance Minimum Qualifications: • Specific training, OJT hours, and appropriate documentation to obtain a minimum of Level II for NDT Disciplines., • Ability to organize and plan work adhering to deadlines; excellent communication skills including excellent leadership, two-way communication, judgement, creativity, negotiation and conflict resolution skills, • Proficiency in interpreting and applying technical data, • Requires sitting, standing or walking for extended periods of time., • Requires frequent walking, climbing and lifting, bending, reaching to shoulder level, carrying, pushing or pulling weight up to 50 pounds., • Requires eye-hand coordination and manual dexterity. Requires corrected vision and hearing to normal range. EQUIPMENT OPERATED: • Borescopes for internal inspections, calipers and micrometers for precision measurements, flashlights and magnifying tools for detailed visual checks, and dye penetrant kits for detecting surface cracks., • UT, RT, ET, MT & PT Testing equipment will be utilized., • Computer software such as Microsoft, Excel, Etc. for tracking, recording and communication. WORKING CONDITIONS: • Aircraft maintenance hangar, maintenance offices, flightline., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly., • Any employee who observes an unsafe action or condition should bring it to the attention of supervisors and managers. Certain conditions may allow the employee to easily correct a condition or situation., • In all cases, the employee must notify his/her supervisor of any actions taken by the employee. The first employee to observe an accident or incident should take immediate action to alert appropriate responders/supervision and to take reasonable steps to prevent further injury, or damage. Duties not listed within the position description may be required of the employee at the discretion of the department management. Job functions may vary due to irregular working conditions or multiple shift positions. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodations for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodations during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

GLC On-The-Go is seeking a travel Medical Lab Technician for a travel job in Fort Mohave, Arizona. Job Description & Requirements • Specialty: Medical Lab Technician, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours We specialize in connecting travel nurses and allied healthcare professionals like you with opportunities in acute care, long-term care, behavioral health, and allied fields across the U.S. Our attentive and friendly recruiters are always just a call or text away, ready to guide you at every step, ensuring you feel valued and heard. We understand the unique needs of travel healthcare professionals, which is why we offer comprehensive benefits and 24/7 support. Join GLC, where our 20+ years of experience mean we know how to help you find the assignments that turn your career goals into reality. With us, it's not just a placement – it's your dream career made possible

GLC On-The-Go is seeking a travel Medical Lab Technician for a travel job in Lake Havasu City, Arizona. Job Description & Requirements • Specialty: Medical Lab Technician, • Discipline: Allied Health Professional, • Start Date: 12/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours GLC – Named Best Nurse Agency 2024–2025 We connect nurses, nursing professionals, and allied health professionals like you to contracts that align with your skills, schedule, and career goals. About this Assignment Join the care team in Laboratory where you’ll provide patient-centered care in a collaborative environment. Typical responsibilities include direct patient care, timely documentation, and coordination with the care team. Specific duties will be confirmed during your interview with a recruiter. Assignment Details • Location: Lake Havasu City, AZ, • Assignment Length: 13 weeks, • Start Date: 12/22/2025, • End Date: 03/23/2026, • Optional: Active license in Laboratory, • Weekly on-time pay with direct deposit, • Transparent communication, clear assignment details, and recruiter support from start to finish - or extension, • Referral bonus up to $500, • Health, dental, and vision insurance, • 401(k) plan We specialize in connecting travel nurses and allied healthcare professionals like you with opportunities in acute care, long-term care, behavioral health, and allied fields across the U.S. Our attentive and friendly recruiters are always just a call or text away, ready to guide you at every step, ensuring you feel valued and heard. We understand the unique needs of travel healthcare professionals, which is why we offer comprehensive benefits and 24/7 support. Join GLC, where our 20+ years of experience mean we know how to help you find the assignments that turn your career goals into reality. With us, it's not just a placement – it's your dream career made possible

Job Description We are looking for enthusiastic individuals to join our team as Behavior Technicians. As a Behavior Technician, you will have the opportunity to make a real difference in the lives of children with autism. In this role, you will work one-on-one with children, implementing individualized behavior intervention plans under the guidance of a Board Certified Behavior Analyst (BCBA). You will use evidence-based techniques to teach communication, social, and daily living skills while reducing interfering behaviors. We are looking for candidates who are passionate about helping children with autism reach their full potential. You will need to be patient, compassionate, and able to work well in a team environment. We will provide comprehensive training so that you are equipped and empowered to help each child, even if you don't currently have experience. Children can be unpredictable and potentially confrontational, so this role is not for the weak of spirit, mind, or body. Part of the joy of working with kids is exercise! Our clients move, so you need to be comfortable standing, walking, sitting, grasping, reaching, bending, kneeling, crouching, squatting, lifting, and at times carrying children or objects that weigh up to 50 pounds. At the end of each day, you will go home knowing that you have made a meaningful impact on the life of a child and their family. Join us and become a part of a dedicated team that is changing lives for the better. Apply now to start your journey as a Behavior Technician with us! Pay Range:$18-24 Requirements: • Passionate about helping children with autism, • Patient, compassionate, and able to work well in a team, • 18+ years of age, • High school diploma or GED, • Ability to obtain a CPR, First Aid Certification and Tuberculosis test (if you haven't had one in the last year), • Ability to pass a pre employment background check, • Ability to move in various positions (sit, squat, bend, etc.), • Ability to lift and carry up to 50 pounds, • Bilingual in Spanish Additional qualifications (not required): • Structured career path in the field of Behavioral Analysis, • Discounts to hundreds of retail partners via our Benefit Hub, • Access to Centria's Employee Assistance Plan with benefits around mental health and counseling, • Early wage access to employees through Rain - Work today, get paid tomorrow!, • Unlimited opportunities to make an impact in the life of a special needs child We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, Veteran status, or disability status. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities, or working conditions associated with the position. This pay scale range is the full range of potential wages Centria Autism reasonably expects to pay for employees with this job title and this pay scale range varies dependent on job qualifications, performance, experience, and/or seniority. This range should not be interrupted to mean that Centria Autism currently employs any employees with this job title at the bottom or top of the pay scale range. Centria reserves the right to amend this job description at any time, with or without written notice.

Job Description We are looking for enthusiastic individuals to join our team as Behavior Technicians. As a Behavior Technician, you will have the opportunity to make a real difference in the lives of children with autism. In this role, you will work one-on-one with children, implementing individualized behavior intervention plans under the guidance of a Board Certified Behavior Analyst (BCBA). You will use evidence-based techniques to teach communication, social, and daily living skills while reducing interfering behaviors. We are looking for candidates who are passionate about helping children with autism reach their full potential. You will need to be patient, compassionate, and able to work well in a team environment. We will provide comprehensive training so that you are equipped and empowered to help each child, even if you don't currently have experience. Children can be unpredictable and potentially confrontational, so this role is not for the weak of spirit, mind, or body. Part of the joy of working with kids is exercise! Our clients move, so you need to be comfortable standing, walking, sitting, grasping, reaching, bending, kneeling, crouching, squatting, lifting, and at times carrying children or objects that weigh up to 50 pounds. At the end of each day, you will go home knowing that you have made a meaningful impact on the life of a child and their family. Join us and become a part of a dedicated team that is changing lives for the better. Apply now to start your journey as a Behavior Technician with us! Pay Range: $18-24 Requirements: • Passionate about helping children with autism, • Patient, compassionate, and able to work well in a team, • 18+ years of age, • High school diploma or GED, • Ability to obtain a CPR, First Aid Certification and Tuberculosis test (if you haven't had one in the last year), • Ability to pass a pre employment background check, • Ability to move in various positions (sit, squat, bend, etc.), • Ability to lift and carry up to 50 pounds Additional qualifications (not required): • Structured career path in the field of Behavioral Analysis, • Discounts to hundreds of retail partners via our Benefit Hub, • Access to Centria's Employee Assistance Plan with benefits around mental health and counseling, • Early wage access to employees through Rain - Work today, get paid tomorrow!, • Unlimited opportunities to make an impact in the life of a special needs child We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, Veteran status, or disability status. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities, or working conditions associated with the position. This pay scale range is the full range of potential wages Centria Autism reasonably expects to pay for employees with this job title and this pay scale range varies dependent on job qualifications, performance, experience, and/or seniority. This range should not be interrupted to mean that Centria Autism currently employs any employees with this job title at the bottom or top of the pay scale range. Centria reserves the right to amend this job description at any time, with or without written notice.

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Job Description: Job Summary: The Aircraft Composite Technician III will ensure that all work accomplished is in accordance with current FAA approved technical data. Adheres to quality maintenance standards in accordance with the company's Repair Station Manual/Quality Control Manual (RSM/QCM) and other applicable manuals such as company and regulatory guidance materials. This includes Airworthiness Directives Ads, AMM Aircraft Maintenance Manuals, SRM Structural Repair Manual, Engineering Orders, Engineering Authorizations while performing structural repair, replacement, and modification of airframe composite structure and other advanced composite structures, including components. Essential Duties and Responsibilities: * This is a safety sensitive position and is subject to pre-employment and random DOT drug and alcohol testing. * Responsible for reviewing work assigned, obtaining tools and necessary parts, and completing the job in a timely manner following the applicable manuals without sacrificing quality or safety. * Ensure that all routine, non-routine, and customer request work cards are correctly completed and properly signed off. * Verify calibrated tooling used is current and properly noted on paperwork. * Ensure that employees are always kept safe by following the company's written policies regarding environmental health and safety. The safety and protection of personnel, environment and property is our number one goal. * Perform all work assigned in accordance with approved or accepted FAA data. * Maintain the premises in a clean and organized manner. * Perform any other duties as assigned by the supervisor or other management personnel. Education and Experience: * High School Diploma or Equivalent. * 2 years of experience. * Large commercial aircraft experience preferred. * Must successfully complete a comprehensive background check, verification of credentials, and a urinary preemployment test for drugs as per DOT regulations. * Depending on location, you may be required to pass the required background checks for TSA FBI etc. to obtain an airport issued badge such as SIDA, AOA, or any other badge required by the airport authority. If required by the location, passing this and obtaining the badge is a condition of employment since the badge allows you access into the worksite. Skills and Abilities: * Attention to detail is imperative. * Positive attitude and willingness to cooperate with others. * Must be able to multi-task. * Strong mechanical aptitude and manual dexterity. * Ability to lift heavy objects and work in confined spaces or elevated areas. * Commitment to continuous learning (keeping up with new technologies & regulations. * Must have strong verbal and written communication skills. * Must exhibit a high level of confidentiality with work products. * Must be flexible to work any shift. * Have mechanical aptitude and ability to use hand tools safely. * Read and understand drawings and engineering data. Work Environments: * Hangar and ramp atmosphere. Must be able to work in uncontrolled climate conditions.

Job Description Salute is a leading provider of cutting-edge Data Center Infrastructure Services, dedicated to serving data center clients worldwide. We pride ourselves on delivering sustainable solutions, unparalleled reliability, and outstanding customer service. As we continue to grow, we are seeking a dynamic and experienced Data Center Technician to join our team and drive our relationships with hyperscale clients to new heights. Data Center Technician: The Technician will be responsible for performing structured cabling installations and server rack deployments in a data center environment. This is a hands-on role requiring attention to detail, the ability to follow instructions, and a strong work ethic. Technical training will be provided on the job; prior experience is not required. The ideal candidate will be reliable, safety-conscious, and able to work both independently and as part of a team under the direction of on-site Salute Leadership. Responsibilities: • Install, route, and secure structured cabling according to project specifications, • Assistwith server rack deployments and related hardware setup, • Follow safety protocols andcompany procedures at all times, • Maintain a clean and organized work environment, • Complete tasks assigned by the Team Lead ina timelyandaccuratemanner, • Support quality assurance efforts by adhering to installation standards, • Communicate clearly and respectfully with team members and supervisors, • Ability to follow precise instructions, • Perform material movement including shipping/receiving and inventory management per standard process, • Perform Data Center pre-cabling to industry standards, • Detailed physical inventory tracking and staging, • Timely responsiveness via MS Outlook, MS Teams, text, and/or phone Requirements: • Knowledge of how to properly utilize power tools is required, • Ability to read and understand cabling maps, • Ability to work at different heights, in confined spaces, and on different surfaces, • Ability to use mobile application technology, • Proficient in Microsoft Word, Excel, Outlook, and Teams. Gain proficiency in workplace IT systems for reporting, timecards, expense entry, and the execution of project tasks. Examples SalesForce, ADP, Expensify) Physical Requirements: • Ability to lift and carry heavy equipment, up to 40lbs., • Ability to climb ladders and multiple flights of stairs to access elevated equipment, • Ability to stand for long periods of time in various work environments, • Ability to bend, stoop, kneel, and reach for equipment related tasks, • Basic physical fitness to respond quickly to emergency situations and navigate areas quickly, • Ability to move quickly and efficiently withing various work environments to troubleshoot issues or respond to emergencies., • Good hand-eye coordination and dexterity for working with small components and connectors, • Clear vision, with or without correction, to perform tasks requiring attention to detail and precision while wearing safety glasses, • Ability to differentiate between color-coded warning signs, labels, and cables, • Ability to work in environments with a wide variety temperature inside a facility, • Ability to work outdoors in various weather conditions, including extreme temperatures, rain, or snow, • Capability to work in environments with elevated noise levels while wearing hearing protection, • Possession of a valid driver’s license for work-related travel, as required Travel Opportunities: This role offers exciting travel opportunities to travel within the United States to various Data Center locations. Travel requirements will vary depending on client’s needs and project demands. Work related travel expenses, including airfare, lodging, and per diem, will be provided. This offers the opportunity to gain diverse experience across different environments and engage with a broad range of clients in the data center sector. Various rotating shifts, 5 days a week, hours vary by schedule (10-hour shifts)

Job Description Are you an expert Auto Body Technician looking for a new full-time challenge? At Flagstaff Collision in Flagstaff, AZ, we're offering a fantastic opportunity in our brand-new, state-of-the-art facility. With a competitive pay range of $28-$32 per flat-rate hour and most of our auto repair techs turning 150-200 hours per week, you'll enjoy a steady and lucrative workload. And we offer a $5,000.00 sign on bonus. $2500.00 up front and $2500.00 after 6 months of employment. Alongside this, we offer excellent benefits, including PTO, health insurance, a 401(k), weekly pay, signing bonuses, and Christmas bonuses. If you're driven by excellence and looking to work in a brand-new, cutting-edge environment, keep reading! WHAT DRIVES FLAGSTAFF COLLISION? Flagstaff Collision is a premier auto body repair shop located in Flagstaff, AZ. Our mission is to deliver top-quality collision repairs with a commitment to excellence and innovation. We pride ourselves on our cutting-edge facility, which is equipped with the latest technology and tools, ensuring our technicians can perform at their best. Our culture is built on being results-driven, growth-minded, and trustworthy, with a strong emphasis on teamwork. We are certified by multiple automakers and work closely with dealers and DRP programs, which keeps us consistently busy and our standards exceptionally high. WHAT THIS AUTO REPAIR ROLE ENTAILS Schedule: This full-time position operates Monday to Friday, from 8 AM to 5 PM. You'll be working at our new facility in Flagstaff, AZ, surrounded by the latest equipment in a clean and professional environment. As an experienced Auto Body Technician, you spend each day at Flagstaff Collision diving into body and frame repairs, tackling everything from minor touch-ups to major collision restorations. You competently use advanced diagnostic tools to ensure every auto repair meets our high standards. Working on well-documented estimates, you navigate a busy shop that's always buzzing with activity. Our automaker certifications and dealer relationships mean a constant stream of vehicles, providing you with diverse, steady, and rewarding challenges every day. WHAT WE NEED FROM YOU • 5+ years of experience as an auto body technician, • Expertise at an A tech level, • Valid driver's license with a good driving record Job Posted by ApplicantPro