Trabajos technology engineering en Dallas, Texas - Page 14Crear alertas

Job Summary Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality. Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis. Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment. Assist maintenance mechanics in work that requires two people or when operational needs demand. Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs. Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems. Ability to certify on all industrial lift equipment. Pickers, Reaches, Skates, Booms, Scissor lifts, etc. Oversee projects as assigned. Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements. Oversee, inspect, and monitor the routine maintenance provided by junior engineers. Will also provide guidance and training as needed. Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent. Graduate of an apprenticeship program or hold current trade certification. Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems - Willing to travel at least/up to 10% of the time for business purposes (within state and out of state). Must be willing to learn new equipment as it is brought on-line. Physical activities necessary to perform one or more essential functions of the position. Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e. fork truck). - Write documents and reports using writing instruments and computers Read information, often in small print (drawings) - Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization. The anticipated salary range for this position: $33.00 - $47.75 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold. Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For a more comprehensive list of our benefits please click here . For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp. We’re dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page here . Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.

Build Your Best Future with the Johnson Controls Team! As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine building performance to serve people, places, and the planet. Join a winning team that empowers you to build your best future! At Johnson Controls, you’ll work on meaningful projects, gain learning opportunities, and thrive in a culture that values your voice and ideas. Your next great opportunity is just a few clicks away! What We Offer • Competitive salary plus incentive plan, • Paid time off: 15 vacation days in your first year, plus 1 week sick time and 3 flex holidays, • Comprehensive benefits package (medical, dental, vision, 401K) – available Day One, • Extensive product and cross-training opportunities with outstanding resources, • Encouraging and collaborative team environment, • Commitment to safety through our Zero Harm policy, • Represent Johnson Controls with expertise in Fire Safety and Fire Alarm Systems, • Drive sales to general and electrical contractors and end users within an assigned territory, • Focus on complex fire alarm projects/COMMERCIAL, • Build strong relationships and deliver solutions that protect lives and propertyHow You Will Do It, • Establish contact with prospects and qualify potential buyers through calls, leads, and Johnson Controls marketing strategies, • Develop and execute a sales strategy to showcase our product offerings and prioritize opportunities, • Conduct seminars, demos, and presentations to generate and qualify leads, • Prepare proposals, deliver financial justifications, and close sales successfully, • Collaborate with district operations to ensure exceptional service delivery, • Maintain accounts through regular follow-up and customer engagement, • Report progress and metrics weekly and monthly, • Minimum 5 years of sales experience in complex Fire Alarm Systems with a proven track record, • Experience selling Fire Alarm-specific projects, • At least 3 years in construction sales, • Highly motivated, success-driven, and self-disciplined, • Strong interpersonal, oral, and written communication skills, • Ability to identify, qualify, and close opportunities, • Simplex Systems experience, • Bachelor’s degree in marketing, business, or engineering OR equivalent work experience, • Experience working with contractors and ability to read blueprints and wiring diagrams, • Proficiency in Microsoft and Oracle programs #SalesHiring #FireAlarmCareers #JoinJCI Salary Range: HIRING SALARY RANGE: $65k-104k (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role also offers a competitive Sales Incentive Plan that will take into account volume and margin on a project, quarterly, and annual basis. This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at

YOUR DAY TO DAY: Principally responsible for the assembly of cables and modules in accordance with exacting design specifications. \n • Coaxial cables (many different size and connectors, flex and solid center conductors)\n, • Industrial automation connectors (panel connectors and ferrules, drive connectors, motor connectors, cutting and terminating equipment)\n, • MS connectors (all kinds of variations and sealing operations)\n, • Commercial electronics connectors (mini and micro fit on medium speed termination equipment)\n, • Hi flex cable assemblies (WL Gore / LEONI cores and PTFE sleeves with heat-shrink and special clamps)\n\nMachine & Equipment used: Soldering irons, soldering aids, cutters, long nose and grip ring pliers, wire strippers, nut drivers, rivet guns, open and box end wrenches, luggers, screwdrivers, component bending tools, torches, vacuum equipment, RF induction heating equipment, cold test equipment, spot welding, laser welding and heliarc welding equipment, brazing equipment, measuring calipers, voltmeters, electronic multi-meter, heat guns, glue guns, tie wrap guns, crimpers, crimping machines, etc. YOU WILL BE ACCOUNTABLE FOR: \n • Fabricates and tests cable assemblies following blueprints specifications, using measuring instruments, hand tools, and machines.\n, • Reads and interprets blueprints, work orders and specifications to define sequence of operations, type & size of cable fittings required, quantity and finished dimensions.\n, • Measures & cuts cable to required length, considering cable stretch metal flow resulting from swaging operations, using cable cutter or saw.\n, • Selects installs dies, jigs, shims, or other accessories in swaging machine, using hand tools.\n, • Assembles fittings onto cable in specified location.\n, • Positions fitting cable between dies of swaging machine and depresses pedal to activate machine that swages fittings onto cable, turning cable assembly by hand as fitting is swaged onto cable.\n, • Verifies dimensions of cable assembly position of fittings, using measuring instruments.\n, • Tests holding capacity of cable assembly, using proof loading machines.\n, • Repairs reworks cable assemblies as required.\n, • May form loops or splices in cables, using clamps fittings, or by reweaving cable strands.\n, • May apply lubricants protective coatings to cable assemblies.\n, • May operate crimping machine.\n, • May mark identifying information on cable assemblies.\n, • May fabricate cable templates.\n, • Performs all work in accordance with established safety procedures.\n, • Maintain shop disciplines (housekeeping, clean as you go and 5S)\n, • Work from assembly drawings, 3-D models, and other general documentation to carry out assembly procedures.\n, • Perform basic assembly operations to exacting tolerances\n, • Use precise measuring instruments\n, • correct dimensional tolerance and check finishing specifications.\n, • Detect defective parts, unusual conditions or operating difficulties and report to proper supervision.\n, • Complete necessary documentation to ensure quality and production requirements.\n, • Be an active participant in team meetings to communicate and help resolve any cost, quality, or production issues.\n, • Must have problem solving abilities.\n, • Must be able to read blueprints and interpret complicated specifications.\n, • Must have extensive understanding of complex mechanical assembly, cable assembly and module assembly.\n, • Understand and operate various hand and power tools involved in assembly and cable making.\n, • Willingness to assist assembly team with other duties as required.\n, • Possess good communication and interpersonal skills; be able to independently solve problems while interacting with various teams and teammates on daily processes and flow.\n, • Must be capable of multi-tasking various duties throughout the day, have a positive attitude with an ability to be versatile and flexible.\n, • Continuous mental and visual attention is necessary to perform various duties requiring constant alertness and activity.\n, • High school diploma or GED.\n, • Typically requires 1+ years wiring experience\n With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Job Description National Account Executive – Labels & Flexible Packaging About Inovar Packaging Group Inovar Packaging Group, LLC is one of North America’s premier flexographic and digital printing companies, committed to the success of both our customers and employees. We continuously invest in the latest technology and equipment, driving innovation and delivering best-in-class products. Our culture is built on teamwork, trust, craftsmanship, and win-win partnerships that put the customer first. Why Join Us? • Competitive compensation and bonus program, • Comprehensive benefits including medical, dental, vision, life insurance, short/long-term disability, • 401(k) with generous company match, • Paid Time Off (PTO), • Career growth opportunities within a rapidly expanding organization Job Summary Inovar Packaging Group is seeking a highly motivated and experienced National Account Executive to drive revenue growth and strengthen our presence in the label and flexible packaging market. This role is ideal for a proven sales professional with a strong track record in pressure-sensitive labels, shrink sleeves, roll-fed labels, and flexible packaging. You will identify opportunities in the market that help commercialize and protect our customers’ products. Success requires a proactive mindset, a strategic long-term view of client relationships, and a passion for asking insightful questions that uncover both current and future customer needs. The ideal candidate has extensive industry experience, an established network, and a demonstrated ability to grow wallet share, improve margins, and build strong partnerships with brand owners and manufacturers. Key Responsibilities Sales Approach & Mindset • Demonstrate a proactive approach, anticipating customer needs and presenting solutions before challenges arise., • Maintain a strategic, long-term account management mindset focused on multi-year growth, customer retention, and expanding share-of-wallet., • Balance hunter and farmer behaviors—actively pursuing new opportunities while nurturing existing accounts to maximize value., • Manage a defined sales “bag,” understanding current spend levels and developing plans to grow revenue within existing accounts., • Apply value-based, margin-conscious selling, identifying opportunities to improve profitability through differentiation and creative solutions., • Use strong discovery techniques to ask the right questions, listen deeply, and uncover operational pain points, future needs, and innovation opportunities., • Develop and maintain strong relationships with new and existing clients, ensuring satisfaction and long-term partnerships., • Identify and engage new prospects through networking, referrals, industry events, and outbound outreach., • Assess customer needs and recommend tailored packaging solutions that enhance product performance and brand impact., • Provide clients with detailed knowledge of label materials, printing technologies, adhesives, and application processes., • Develop and implement sales strategies focused on target segments within labels and flexible packaging., • Prepare quotes, credit terms, bid specifications, and proposals; negotiate pricing and agreements to close profitable deals., • Partner with internal teams—including purchasing, production, quality, and logistics—to ensure on-time delivery and flawless execution., • Stay current on industry trends, materials, technologies, competitor capabilities, and sustainability initiatives., • Position Inovar as a trusted, forward-thinking partner by bringing insights, innovation, and solutions to customers. Required Skills & Qualifications • Passion for customer service, creative problem-solving, and proactive account development., • 3+ years of direct sales experience in pressure-sensitive labels, shrink sleeves, roll-fed labels, flexible packaging, reclosure, or lidding solutions., • Deep knowledge of printing technologies, substrates, adhesives, and application methods., • Proven success in growing revenue, increasing wallet share, and achieving sales targets., • Strong ability to build relationships with brand owners, converters, and manufacturers., • Excellent communication, presentation, and negotiation skills., • Familiarity with packaging regulations, compliance standards, and sustainability trends., • Bachelor’s degree in Business, Marketing, Packaging Engineering, or related field., • Ability to lift sample materials and presentation kits up to 25 lbs., • Frequent travel to customer sites, trade shows, and company facilities. If you’re seeking an opportunity with a company that values innovation, teamwork, craftsmanship, and a proactive approach to serving customers, Inovar Packaging Group is the place for you.

Date Posted: 2025-12-17 Country: United States of America Location: TX231: Richardson 1601 North Plano Road , Richardson, TX, 75081 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. At Raytheon's Optics Manufacturing Center, the Manufacturing Engineering team plays a critical role in sustaining our competitive edge in the design and production of complex optical components, assemblies, and systems. We are responsible for driving operational excellence-ensuring high-quality product delivery that meets schedule, cost, and safety targets. The Manufacturing Engineering team at our facility in Richardson TX seeks a highly skilled and motivated Optics Manufacturing Engineer to join our team. Relocation benefits are available. This is a unique opportunity to contribute to the production of advanced optical elements using state-of-the-art grinding and polishing technologies. (NOTE: This is high-precision optics technology, not eyeglasses / eyesight related) What You Will Do: \n • Provide engineering support for the fabrication and metrology of high-precision optical windows, lenses and prisms.\n, • Develop and document robust manufacturing process plans that meet complex optical and mechanical specifications, while optimizing for cost, throughput, quality, and yield.\n, • Interpret and verify conformance of engineering drawings, specifications, work instructions, and test procedures to applicable internal and external standards.\n, • Support bid and proposal efforts by estimating time and resources required for manufacturing activities.\n, • Drive continuous improvement initiatives through data analysis and process optimization.\n, • Collaborate closely with manufacturing technicians on the factory floor to resolve production issues in real time.\n, • Specify, procure, and validate production and metrology equipment required for optical manufacturing and testing.\n, • Lead root cause analysis and corrective action (RCCA) efforts for product or process failures using structured problem-solving tools such as 5 Whys and Fishbone.\n, • Interface with cross-functional teams, program management, and customers to provide technical guidance, ensure requirements compliance, and support key project milestones.\n, • First / day shift position.\n\n Qualifications You Must Have: \n • Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) or equivalent, with a minimum of 2 years of relevant engineering experience., • Relevant experience is providing engineering support in a precision optics manufacturing environment.\n\n, • Work history in optical manufacturing processes, including grinding, pitch polishing, and/or pad polishing techniques.\n, • Hands-on experience operating planetary and spindle polishing machines for optical fabrication.\n, • Proficiency in measuring and evaluating optical components using optical interferometry.\n\n Qualifications We Prefer: \n • Advanced degree (MS/PhD) in Mechanical Engineering, Precision Engineering, or a related field.\n, • Reading and interpreting engineering drawings that utilize GD&T standards and translating them into appropriate manufacturing steps.\n, • Hands-on expertise in operating and programming 3-axis and/or 5-axis CNC equipment using CAM software MasterCAM or comparable platforms.\n, • Setting up machines, executing initial runs, troubleshooting issues, and conducting post-machining inspections.\n, • Creating and evaluating CAD models using Creo, SolidWorks, or similar CAD software.\n, • Conducting root cause analysis and implementing effective corrective actions.\n, • Developing clear and detailed technical documentation to support manufacturing operations.\n, • Adapting work hours as needed to meet business and production demands.\n\n What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation offered. Learn more & apply now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. #LI-Onsite As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

YOUR DAY TO DAY: Principally responsible for the assembly of cables and modules in accordance with exacting design specifications. \n • Coaxial cables (many different size and connectors, flex and solid center conductors)\n, • Industrial automation connectors (panel connectors and ferrules, drive connectors, motor connectors, cutting and terminating equipment)\n, • MS connectors (all kinds of variations and sealing operations)\n, • Commercial electronics connectors (mini and micro fit on medium speed termination equipment)\n, • Hi flex cable assemblies (WL Gore / LEONI cores and PTFE sleeves with heat-shrink and special clamps)\n\nMachine & Equipment used: Soldering irons, soldering aids, cutters, long nose and grip ring pliers, wire strippers, nut drivers, rivet guns, open and box end wrenches, luggers, screwdrivers, component bending tools, torches, vacuum equipment, RF induction heating equipment, cold test equipment, spot welding, laser welding and heliarc welding equipment, brazing equipment, measuring calipers, voltmeters, electronic multi-meter, heat guns, glue guns, tie wrap guns, crimpers, crimping machines, etc. YOU WILL BE ACCOUNTABLE FOR: \n • Fabricates and tests cable assemblies following blueprints specifications, using measuring instruments, hand tools, and machines.\n, • Reads and interprets blueprints, work orders and specifications to define sequence of operations, type & size of cable fittings required, quantity and finished dimensions.\n, • Measures & cuts cable to required length, considering cable stretch metal flow resulting from swaging operations, using cable cutter or saw.\n, • Selects installs dies, jigs, shims, or other accessories in swaging machine, using hand tools.\n, • Assembles fittings onto cable in specified location.\n, • Positions fitting cable between dies of swaging machine and depresses pedal to activate machine that swages fittings onto cable, turning cable assembly by hand as fitting is swaged onto cable.\n, • Verifies dimensions of cable assembly position of fittings, using measuring instruments.\n, • Tests holding capacity of cable assembly, using proof loading machines.\n, • Repairs reworks cable assemblies as required.\n, • May form loops or splices in cables, using clamps fittings, or by reweaving cable strands.\n, • May apply lubricants protective coatings to cable assemblies.\n, • May operate crimping machine.\n, • May mark identifying information on cable assemblies.\n, • May fabricate cable templates.\n, • Performs all work in accordance with established safety procedures.\n, • Maintain shop disciplines (housekeeping, clean as you go and 5S)\n, • Work from assembly drawings, 3-D models, and other general documentation to carry out assembly procedures.\n, • Perform basic assembly operations to exacting tolerances\n, • Use precise measuring instruments\n, • correct dimensional tolerance and check finishing specifications.\n, • Detect defective parts, unusual conditions or operating difficulties and report to proper supervision.\n, • Complete necessary documentation to ensure quality and production requirements.\n, • Be an active participant in team meetings to communicate and help resolve any cost, quality, or production issues.\n, • Must have problem solving abilities.\n, • Must be able to read blueprints and interpret complicated specifications.\n, • Must have extensive understanding of complex mechanical assembly, cable assembly and module assembly.\n, • Understand and operate various hand and power tools involved in assembly and cable making.\n, • Willingness to assist assembly team with other duties as required.\n, • Possess good communication and interpersonal skills; be able to independently solve problems while interacting with various teams and teammates on daily processes and flow.\n, • Must be capable of multi-tasking various duties throughout the day, have a positive attitude with an ability to be versatile and flexible.\n, • Continuous mental and visual attention is necessary to perform various duties requiring constant alertness and activity.\n, • High school diploma or GED.\n, • Typically requires 1+ years wiring experience\n With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

YOUR DAY TO DAY: Principally responsible for the assembly of cables and modules in accordance with exacting design specifications. \n • Coaxial cables (many different size and connectors, flex and solid center conductors)\n, • Industrial automation connectors (panel connectors and ferrules, drive connectors, motor connectors, cutting and terminating equipment)\n, • MS connectors (all kinds of variations and sealing operations)\n, • Commercial electronics connectors (mini and micro fit on medium speed termination equipment)\n, • Hi flex cable assemblies (WL Gore / LEONI cores and PTFE sleeves with heat-shrink and special clamps)\n\nMachine & Equipment used: Soldering irons, soldering aids, cutters, long nose and grip ring pliers, wire strippers, nut drivers, rivet guns, open and box end wrenches, luggers, screwdrivers, component bending tools, torches, vacuum equipment, RF induction heating equipment, cold test equipment, spot welding, laser welding and heliarc welding equipment, brazing equipment, measuring calipers, voltmeters, electronic multi-meter, heat guns, glue guns, tie wrap guns, crimpers, crimping machines, etc. YOU WILL BE ACCOUNTABLE FOR: \n • Fabricates and tests cable assemblies following blueprints specifications, using measuring instruments, hand tools, and machines.\n, • Reads and interprets blueprints, work orders and specifications to define sequence of operations, type & size of cable fittings required, quantity and finished dimensions.\n, • Measures & cuts cable to required length, considering cable stretch metal flow resulting from swaging operations, using cable cutter or saw.\n, • Selects installs dies, jigs, shims, or other accessories in swaging machine, using hand tools.\n, • Assembles fittings onto cable in specified location.\n, • Positions fitting cable between dies of swaging machine and depresses pedal to activate machine that swages fittings onto cable, turning cable assembly by hand as fitting is swaged onto cable.\n, • Verifies dimensions of cable assembly position of fittings, using measuring instruments.\n, • Tests holding capacity of cable assembly, using proof loading machines.\n, • Repairs reworks cable assemblies as required.\n, • May form loops or splices in cables, using clamps fittings, or by reweaving cable strands.\n, • May apply lubricants protective coatings to cable assemblies.\n, • May operate crimping machine.\n, • May mark identifying information on cable assemblies.\n, • May fabricate cable templates.\n, • Performs all work in accordance with established safety procedures.\n, • Maintain shop disciplines (housekeeping, clean as you go and 5S)\n, • Work from assembly drawings, 3-D models, and other general documentation to carry out assembly procedures.\n, • Perform basic assembly operations to exacting tolerances\n, • Use precise measuring instruments\n, • correct dimensional tolerance and check finishing specifications.\n, • Detect defective parts, unusual conditions or operating difficulties and report to proper supervision.\n, • Complete necessary documentation to ensure quality and production requirements.\n, • Be an active participant in team meetings to communicate and help resolve any cost, quality, or production issues.\n, • Must have problem solving abilities.\n, • Must be able to read blueprints and interpret complicated specifications.\n, • Must have extensive understanding of complex mechanical assembly, cable assembly and module assembly.\n, • Understand and operate various hand and power tools involved in assembly and cable making.\n, • Willingness to assist assembly team with other duties as required.\n, • Possess good communication and interpersonal skills; be able to independently solve problems while interacting with various teams and teammates on daily processes and flow.\n, • Must be capable of multi-tasking various duties throughout the day, have a positive attitude with an ability to be versatile and flexible.\n, • Continuous mental and visual attention is necessary to perform various duties requiring constant alertness and activity.\n, • High school diploma or GED.\n, • Typically requires 1+ years wiring experience\n With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Senior Director, Data Management - Financial Advisor Services Vanguard’s Financial Advisor Services (FAS) business is seeking a Senior Director to establish the data foundation that will power FAS today and in the future. This role will operationalize FAS’s domain-driven, enterprise-aligned data strategy, ensuring trusted, governed, and AI-ready data products that empower advisors, enhance crew experiences, and strengthen Vanguard’s brand. The leader will drive data-as-a-product principles, establish governance from the start, and enable real-time insights for analytics and operational systems. Leadership & Strategy * Define and execute a domain-driven data management strategy aligned with FAS’s 2030 vision. * Align FAS data domains (Advisor/Client, Financial, Engagement, Digital, Operations) with enterprise taxonomy and standards. * Champion data-as-a-product principles: clear ownership, accountability for quality, accessibility, and business value. * Build and lead a team covering governance, stewardship, data quality, metadata, master data management, risk, and integration. * Develop a roadmap supporting real-time, analytics- and AI-ready data capabilities supporting hyper-personalization, agentic CRM, and territory dashboards. Data Governance & Controls * Implement governance from the start: policies, standards, and oversight across analytics and operational data. * Establish data contracts, security lifecycle management, and metadata lineage for critical data elements. * Drive consistent governance for third-party data packs and internal sources, ensuring compliance and trust. Third-Party Data Integration * Lead onboarding and harmonization of multiple external data packs (assets and cash flow, advisor attributes, CRM enrichment, portfolio data). * Apply source-aligned ownership and enforce vendor governance: licensing, permitted use, freshness SLAs. * Standardize ingestion, schema alignment, deduplication, and survivorship rules across domains. Data Architecture & Operations * Vanguard Internal Use Only• Partner with FAS Technology to implement modern patterns (lakehouse, master data management, catalog, data quality services). * Ensure metadata management, lineage visibility, and automated data quality remediation workflows. * Deliver real-time data flows for operational and analytical use cases. Data Products & Enablement * Translate business needs into curated, governed data products (e.g., Sales Compensation, Models, Client Profile). * Publish data products in a catalog with clear contracts, glossary, and permitted use. * Enable self-service analytics responsibly with embedded governance guardrails. Stakeholder Management * Drive adoption of FAS data strategy through education and change management. * Partner with Sales, Marketing, Product, Risk, and Enterprise Data Office to align priorities. Qualifications: Required: * 10+ years in data management leadership; 5+ years in financial services. * Expertise in domain-driven design, data governance frameworks, and data-as-a-product operating models. * Experience integrating multiple third-party data sources and managing vendor governance. * Strong knowledge of metadata, lineage, data quality, and cataloging. * Familiarity with real-time data architectures and AI/analytics enablement. * Bachelor’s degree in Information Systems, Data/Analytics, Engineering or related field. Preferred: * Experience with advisor/intermediary distribution data and taxonomies. * Advanced degree or certifications (CDMP, DAMA, cloud). * Exposure to hyper-personalization, agentic AI architectures, and operational analytics use cases. Special Factors Sponsorship Vanguard is offering visa sponsorship for this position. About Vanguard At Vanguard, we don't just have a mission—we're on a mission. To work for the long-term financial wellbeing of our clients. To lead through product and services that transform our clients' lives. To learn and develop our skills as individuals and as a team. From Malvern to Melbourne, our mission drives us forward and inspires us to be our best. How We Work Vanguard has implemented a hybrid working model for the majority of our crew members, designed to capture the benefits of enhanced flexibility while enabling in-person learning, collaboration, and connection. We believe our mission-driven and highly collaborative culture is a critical enabler to support long-term client outcomes and enrich the employee experience.

Job Description Job Title: ITSM Sales Consultant - MSP Company: Virtual Technologies Group (VTG) Location: Remote: Must be located in TX or Mountain Standard Time Travel %: Variable to client sites- up to 50% Position Type: Full-time, Exempt Compensation Range: $125k – $130k base + bonus & commission, targeting $250k+ total comp Company Overview: Virtual Technologies Group is a leading innovator in the technology sector, specializing in the development and implementation of advanced virtual solutions. Our mission is to empower businesses with cutting-edge technology that enhances efficiency, productivity, and connectivity. With a team of highly skilled professionals, we deliver customized solutions tailored to meet the unique needs of our clients across various industries. Our commitment to excellence, innovation, and customer satisfaction drives us to continuously push the boundaries of what is possible. At Virtual Technologies Group, we are dedicated to shaping the future of technology and making a positive impact on the world. Position Overview: Join us at Virtual Technologies Group (VTG) as a Business Development Executive. Expand our reach while upholding our reputation in IT support on a national level to a diverse group of clients. VTG offers tech solutions, ranging from managed IT services, to custom application development, to ITSM, as well as cybersecurity and physical security offerings. The Business Development Executive will play a crucial role in driving revenue growth for VTG by identifying and pursuing new business opportunities. Through strategic prospecting, lead generation, and relationship building, the Business Development Executive will contribute significantly to expanding our client base. Responsibilities/Job Functions: Lead Generation & Prospecting: • Cover assigned geography to identify qualified sales opportunities to achieve sales quota, • Engage with Company software partners to identify qualified sales opportunities, • Obtain necessary sales certifications from our software partners, • Attend customer meetings; convey industry thought leadership and Company differentiators, • Capture customer requirements and manage the entire sales cycle to deal closure, • Develop/Review/Edit Statements of Work, • Support pre-sales team in conducting compelling product demonstrations, • Attend industry trade shows and support partner show/booth activities, • Engage in field marketing activities including social media (e.g., webinars, videos), • Establishing strategic relationships with key customer stakeholders, • Consistently follow Company sales process, • Represent Company in a professional and ethical manner, • Enter leads/opportunities within Company CRM and consistently/accurately update solution to ensure clarity. Sales & Business Development: * Conduct needs assessments and develop tailored proposals to address client requirements. * Deliver compelling presentations to prospective clients, showcasing Company's value proposition. * Negotiate and close deals, ensuring mutually beneficial agreements. * Monitor industry trends and competitor activities to identify new market opportunities. Client Relationship Management: * Build and maintain strong relationships with key decision-makers at prospective client organizations. * Act as a trusted advisor to clients, providing expert guidance on IT solutions. * Foster long-term relationships with clients to ensure ongoing business opportunities. Sales Forecasting & Reporting: * Accurately forecast and track sales performance against established targets. * Prepare regular sales reports and presentations for management. * Analyze sales data to identify areas for improvement and optimize sales strategies. Teamwork & Collaboration: * Collaborate with internal teams, including marketing, sales engineering, and technical support, to ensure successful project delivery. * Share best practices and knowledge with other sales team members. * Contribute to the overall success of the sales organization. Minimum Qualifications: * Bachelor's degree in Business Administration, Marketing, or a related field preferred. * 5+ years of proven success in a business development or sales role, preferably within the IT industry. * Strong understanding of IT services, including managed services, cloud computing, cybersecurity, and data center solutions. * Excellent communication, presentation, and negotiation skills. * Strong analytical and problem-solving skills. * Ability to work independently and as part of a team. * Proficient in CRM software (e.g., Salesforce, Microsoft Dynamics, HubSpot). * Excellent time management and organizational skills. Preferred Qualifications: • Knowledge/experience with IT Service Management (ITSM), • Exposure to enterprise IT Operations Management (ITOM), • Strong communication and presentation skills, • Evidence of consistent quota attainment, • Familiarity with Strategic Selling, The Challenger Sale, and/or similar sales methodologies, • Ability to operate independently to successfully manage the assigned territory and quota, • Anticipated Quota: $1M software ARR, $1M professional services Why Join Us? At Virtual Technologies Group we provide more than just IT solutions—we offer a dynamic environment where you can learn, grow, and expand your skillset. As a leading managed services, cybersecurity, and IT consulting firm, we support a diverse range of customers, giving you the opportunity to tackle unique challenges and stay ahead in a rapidly evolving industry. Join a team that values innovation, collaboration, and professional development. Whether you're looking to sharpen your technical expertise, work with cutting-edge technology, or make a real impact, we’re committed to helping you build a rewarding career. Benefits Overview: VTG offers a comprehensive benefits package to meet the needs of our employees and their families. Benefits include medical insurance plans, dental insurance, vision insurance, health savings accounts (HSA), flexible spending accounts (FSA), life insurance, short and long-term disability insurance, paid time off and holidays, and a 401(k) with employer match. EEO Statement: VTG is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. We believe that diversity strengthens our team and drives innovation. All employment decisions are based on qualifications, merit, and business needs. If you require reasonable accommodation during the application or interview process, please contact . Powered by JazzHR 1TqTeThfdE

Date Posted: 2026-02-27 Country: United States of America Location: US-AZ-TUCSON-9030 ~ 9030 S Rita Rd ~ BLDG 9030 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. We are seeking a highly motivated and experienced Integrated Product Team Lead (IPTL) to lead and manage our Hardware-in-the-Loop (HWIL) development for a large program in Naval Air Missiles. The IPTL will be responsible for overseeing cross-functional teams, ensuring the successful development, integration, and testing of complex systems in a simulated environment. The IPTL will identify and manage risks and opportunities that could impact the execution, performance, or schedule of the IPT scope. This role requires a strong technical engineering and HWIL background, excellent leadership skills, prior proposal support experience, and the ability to manage schedules, budgets, and deliverables. The role requires prior experience troubleshooting and integrating various systems. The IPTL will be responsible to manage cost, schedule and technical performance of a medium sized team. This is an onsite role located in Tucson, AZ. What You Will Do * Lead and manage the HWIL IPT through all phases of the project lifecycle, from requirements definition through development and integration to delivery. * Lead system integration activities within HWIL facilities to support system signal presentation. * Lead troubleshooting and failure investigation activities within the program assigned HWIL facilities. * Generate requirements, statements of work, and verification plans to support HWIL design activities. * Lead HWIL engineering teams which perform test system design, assembly and integration activities on developmental programs. * Collaborate with cross-functional teams, including systems engineering, software engineering, firmware engineers, modeling and simulation engineers and algorithm developers to ensure alignment on project goals and objectives. * Working with Program Manager, define project schedules, budgets, and resource requirements, and ensure adherence to program milestones. * Oversee the design, development, and integration of HWIL test environments, including simulation models, hardware, and software components. * Manage risk identification, mitigation strategies, and resolution of technical challenges throughout the project lifecycle. * Provide technical guidance and mentorship to team members to foster a collaborative and high-performing team environment. * Act as the point of contact for internal and external stakeholders, communicating project status, risks, and opportunities effectively. * Support proposal development and planning activities for future projects and initiatives related to HWIL systems. * Attend Failure Review Boards (FRBs) when required. * Attend Change Control Boards (CCBs) and approve system changes. Qualifications You Must Have * Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of ten (10) years of prior relevant experience. * Integration experience including hardware, software and/or firmware. * Experience with software languages such as Java, C, C++, or similar languages; scripting languages such as Python and/or Perl, and MATLAB scripts for data analysis purposes. * Experience leading cross-functional teams and managing complex projects. * Experience with both Windows and Linux operating systems. * Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer * Earned Value Management System (EVMS) Certified or able to obtain the certification within 6 months in the job. * Experience with electronics design and/or experience conducting data analysis. * Experience troubleshooting systems using test equipment such as oscilloscopes, logic analyzers, network analyzers, and/or spectrum analyzers. * Knowledge of networking and IP addressed based equipment. * Knowledge of or experience with equipment rack assembly, cable assembly/installation, electronics maintenance. * Familiar with various communication interfaces such as RS-232, RS-485, Ethernet, CAN, 1553. * Experience troubleshooting systems using test equipment such as data acquisition systems, oscilloscopes, bus analyzers, logic analyzers, network analyzers, and/or spectrum analyzers. * Familiarity with model-based systems engineering (MBSE) and Agile development methodologies and HWIL architectures. * Experience with Advanced signal generation and presentation, across RF test environments. * Experience with Ultra, CHIP and ARC development environments. What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * Relocation Eligibility. Learn More & Apply Now! RTX solves some of the toughest challenges in aerospace and defense. That requires expansive thinking and bold innovation. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this ___ to read the Policy and Terms

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Manufacturing Engineering Job Number: 34300 Job Location: Richardson, TX Job Schedule: 4 / 10 Job Description: L3Harris is searching for a Manufacturing Engineer to support the Unmanned Systems business in Richardson, TX. This role is responsible for solving manufacturing problems with innovative solutions and driving continuous improvement in our manufacturing processes, be a key part of the Integrated Product Team to develop and execute manufacturing plans, and collaborating with other engineering disciplines, program management, quality assurance, and manufacturing. This role is apart of the Agile Development Group which is a division that specializes in developing disruptive, next-generation technologies for advanced Unmanned Air Systems (UAS / UAV), advanced radar systems, next-generation weapon systems, and other RF sensor technologies using small company agility and big company experience. Essential Functions: \n • Investigate and implement alternate/new manufacturing processes and technologies for emerging programs. \n, • Provide key technical input on all product designs for manufacturing ease and cost considerations. This includes analyzing different design approaches and manufacturing methods. \n, • Examine early assembly prototyping/testing to provide feedback in the design process. \n, • Identify and justify capital equipment needs for capacity and capability expansion \n, • Provide technical mentorship for team in areas of expertise \n, • Contribute to CAM and IPT activities \n, • Initiate and review manufacturing workflow and processes/procedures such as: \n\n, • Work/assembly instructions \n, • Rework and modification instructions \n, • Travelers/routers \n, • Special process instructions \n, • Standard repair instructions \n\n, • Review and approve drawings for the Manufacturing Department (i.e. sign off authority). \n, • Communicate information between the design and manufacturing teams and ensure that design feedback from manufacturing is relayed to engineering. \n, • Lead and support Lean Manufacturing initiatives in the organization such as 5S, Tool Control, etc. \n, • Up to 5% travel may be required \n, • Ability to obtain and maintain a DoD clearance \n\n Qualifications: \n • Bachelor's Degree and minimum 6 years of prior relevant experience. \n, • Graduate Degree and a minimum of 4 years of prior related experience. \n, • In lieu of a degree, minimum of 10 years of prior related experience. \n\n Preferred Additional Skills: \n • Masters degree in relevant engineering field or related field and/or equivalent experience desired \n, • Experience and knowledge of manufacturing methods, specifically in composites, metals, and electronics. \n, • Experience leading small teams \n, • Experience with technical writing, specifically work instructions and process documentation. \n, • Experience in aviation or military systems manufacturing \n, • Experience with creating and presenting performance metrics. \n, • Experience with Capital Equipment justification and BOEs \n, • Excellent people skills to include collaborating in a multi-disciplinary, diverse, and dynamic team environment \n, • Excellent communication skills (written, verbal, & presentation) \n, • Experience in a 3D CAD software. Experience in Creo is preferred \n, • Experience with Power BI or data analytics \n, • Experience/certification in lean practices; 5S, six sigma \n\n #LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

A 15 year old consumer site that still acts like a startup but is stable and growing! This Jobot Job is hosted by: Adam Bennett Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: We build software that supports organizations running high-volume, schedule-driven programs where reliability, ease of use, and scale matter. Our platform is used globally by operators who rely on mobile technology to manage day-to-day operations, engage customers, and keep their businesses running smoothly. We are a product-led company that values long-term thinking, technical craftsmanship, and practical problem solving. Growth has been steady and intentional, with a strong focus on stability and customer impact rather than hype. The engineering team works closely with product and design to ship meaningful improvements, not just features. Why join us? This role offers the chance to own and shape core mobile experiences used daily by a large, active user base. You’ll work in an environment that values clean architecture, thoughtful tradeoffs, and code that lasts. Engineers here are trusted to make decisions, mentor others, and influence product direction without unnecessary process overhead. The company prioritizes sustainable pace, flexibility, and long-term growth over short-term crunch. If you enjoy building native mobile applications that directly impact real businesses, this is a place where your work will be felt. Job Details Design, build, and maintain native mobile applications on iOS Write high-quality, testable, and maintainable code using modern mobile frameworks Collaborate with product, design, and backend teams to deliver new functionality Lead technical decisions around architecture, performance, and security Improve existing features with a focus on usability and reliability Mentor junior engineers and provide thoughtful code reviews Participate in planning, estimation, and technical discovery Contribute to CI/CD pipelines and release processes Document solutions and communicate technical concepts clearly Take ownership of features from concept through production support Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionAbout ZiplineDo you want to change the world? Zipline is on a mission to transform the way goods move. Our aim is to solve the world's most urgent and complex access challenges by building, manufacturing and operating the first instant delivery and logistics system that serves all humans equally, wherever they are. From powering Rwanda's national blood delivery network and Ghana's COVID-19 vaccine distribution, to providing on-demand home delivery for Walmart, to enabling healthcare providers to bring care directly to U.S. homes, we are transforming the way things move for businesses, governments and consumers. The technology is complex but the idea is simple: a teleportation service that delivers what you need, when you need it. Through our technology that includes robotics and autonomy, we are decarbonizing delivery, decreasing road congestion, and reducing fossil fuel consumption and air pollution, while providing equitable access to billions of people and building a more resilient global supply chain.Join Zipline and help us to make good on our promise to build an equitable and more resilient global supply chain for billions of people.About You and The Role Zipline is seeking Maintenance Technicians who have sound judgment, excellent interpersonal skills and high standards. Success will require attention to detail, a safety-oriented attitude, flexibility, and enthusiasm for cutting-edge technology.What You'll Do You will be responsible for scheduled and unscheduled aircraft maintenance, ensuring the aircraft conforms to high standards, is in safe operating condition and that all procedures are followed and documented appropriately. This candidate is expected to work closely with engineering, flight operations, and other teams to deliver on their assigned responsibilities with minimal supervision.What You'll Bring Basic Qualifications • Adhere to and perform work in accordance with Zipline's Continuous Airworthiness Maintenance Program (CAMP), • Perform UAS Maintenance in accordance with Zipline's General Maintenance Manual (GMM) and Federal Aviation Administration regulations, • Basic engineering knowledge: mechanical, electrical and software, • Mechanical and electrical integration and assembly experience, • Experience performing precision work with hand tools, • Must be able to support shift work including, but not limited to days/evenings, weekends, etc., • Must be able to travel 5-10%, as necessary, • Must be eligible to work in the U.S., • Ability to lift and or move up to 55 pounds, • Must have a valid US Driver's License, • Must be able to receive Repairmen Certification, • This role is classified as a Safety Sensitive opportunity, and is therefore subject to pre-employment and random drug and alcohol testing, • Bachelor's degree, • Remote pilot certificate (P107) or manned certificate, • Experience in the development of manuals, training materials, and operational procedures for sUAS operations We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! #zr

At Trane TechnologiesTM and through our businesses including Trane® and Thermo King®, we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. What’s in it for you: Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient environments, it’s our responsibility to put the planet first. For us at Trane Technologies, sustainability is not just how we do business—it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what’s possible for a sustainable world. Thrive at work and at home: • Benefits kick in on DAY ONE for you and your family, including health insurance and holistic wellness programs that include generous incentives – WE DARE TO CARE!, • Family building benefits include fertility coverage and adoption/surrogacy assistance., • 401K match up to 6%, plus an additional 2% core contribution = up to 8% company contribution., • Paid time off, including in support of volunteer and parental leave needs., • Educational and training opportunities through company programs along with tuition assistance and student debt support., • Learn more about our benefits here! Where is the work: • Onsite work office location TBD. This position is aligned with Customer Facing Sales & Service Work: Prioritize engaging with customers; when not directly interacting with customers, enjoy the collaborative environment in a regional office. Reporting to the Director of Strategic Programs, the candidate in this position will be responsible for growing the share of Cooperative bookings as assigned for all Products and Services represented by the Trane/COOP contracts. The Strategic Program Manager’s success will be found in the ability to tailor and leverage marketing programs to the education and government market by: • Assisting field sales offices in developing total business solutions for Cooperative clients, • Assisting the field sales offices in explaining the program to clients, • Coordinating the program to ensure maximum exposure to the Cooperative clients, • Understanding the unique needs of the market, • Assessing competition, market trends and economics, • Developing and executing on customer-facing marketing strategies and plans, • Bringing packaged solutions and marketing programs that target this unique market with the goal of leveraging these solutions to grow the company’s market share This individual will join a dynamic environment and ideally bring market-specific knowledge, as well as expertise in packaging, consulting, systems, and services to the education and government customers. This person will operate at a relatively senior level providing council on market specific marketing strategies and programs that target superintendents, business managers, purchasing managers, education board members, construction decision makers, mayors, facilities managers, elected officials, county officers, and key financial consultants. In addition, this role will be responsible for training, communicating with, and assisting in the solutions process of Trane associates that are accessing or interested in accessing the Cooperative contracts. What you will do: • Communicate with associates needing cooperative information or training, • Provide cooperative technical training to Trane offices, • Provide updates and reports as required, • Become familiar with the Trane/COOP contracts to be able to conduct spot audits at a customer or cooperative request, • Evaluate the reporting process and suggest solutions that will streamline the process, • Become familiar with and stay abreast of cooperative competitors, • Assist and train customers on questions and concerns on the cooperative contracts, • Work with Trane offices on training of the cooperative contracts, • Coordinate, train, and be the liaison for all equipment affiliates on the cooperative contracts, • Work with internal systems staff on issues relating to COOPs, • Identify opportunities for cooperative growth in markets that are applicable, • Provide customer and training presentations to COOP sales, • Attend trade shows as required and coordinate major events with Trane marketing as well as Trane offices marketing personnel, • Promote solution tools to Trane associates through newsletters, electronic media, and flyer, • Visit Trane offices in the region to assist in training, communication, customer education to promote the cooperative contracts, • Help develop marketing tools to elevate the contract to focus on additional opportunities, • Acquire and demonstrate a broad understanding of the legislation, procurement methods, and initiatives impacting the COOP contracts in their respective states for the region, • Develop and execute a detailed business plan to include specific strategies, tactics and timelines for results for each of Trane’s revenue streams (solutions, equipment, controls, service, parts and training) for the respective region, • Engage existing and targeted COOP clients to articulate value propositions at the executive and board level, • Provide leadership in the area of education, understanding, and focus on the market. Work closely with all Trane corporate departments to coordinate effective team direction, business development and seamless implementation to deliver the “One Trane” solution, • Implement Trane’s National Education programs as applicable, • Track progress against assigned goals and expectations Up to 40% travel What you will bring: • A bachelor’s degree with a business, technology or engineering emphasis is desired Minimum of 5-7 years of related sales/management experience, preferably in a consultative approach to the education market DL NUMBER - Driver License, Valid and in State Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations included, but not limited to: DUI, Hit & Run, License Suspension, Reckless/Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years. within 1 Year Required. This role has been designated by the Company as Safety Sensitive Characteristics of Candidate: Excellent verbal and written communication skills • Ability to “deliver the message” to the customer, • Has good vocabulary, • Has good verbal reasoning and problem-solving abilities, • Computer proficiency utilizing Word, Outlook, CRM, Excel, • Ability to learn, • Demonstrates the ability to establish rapport with key customers, • Looks neat and well-groomed, • High energy level Compensation: Pay Range: $98,500 - $230,000 Additional Compensation: Incentive Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors. The actual compensation will depend on elements such as seniority, merit, geographic location, education, experience, travel requirements, and union designation. Our compensation range is generally based on the national average for the country. Additionally, benefits may vary depending on the region, business alignment, union involvement, and employee status. Equal Employment Opportunity: We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Description Summary: The IT Architect Lead is responsible for design of IT systems including system infrastructure, system security, application architecture, software and data life cycle management. Provides enterprise architectural framework for the design, development, and deployment of information/business systems. Proactively drives the prioritization of key technology enablers for achieving enterprise level system objectives while ensuring scalability, reliability, and availability of implemented systems. Provides leadership and expertise to evaluate planned platform growth, increasingly demanding enterprise service level requirements in order to identify, design, and implement technology solutions that exceed expectations. This role requires excellent collaboration and communication skills to translate complex requirements into functional architecture. Responsibilities: • Assists in the development of the information system vision and strategy of the organization; assists in the development, implementation, communication, and promotion of strategic and tactical plans., • Researches and participates in beta testing of new systems and technologies in order to better evaluate their suitability to the CHRISTUS environment., • Evaluates proposed system acquisitions and provides critical input to the decision-making process relative to compatibility, cost, resource requirements, operations, and maintenance; develops plans and recommendations to improve the performance and efficiency of assigned systems; addresses all aspects of assigned systems, including hardware, software, outside services, etc.; considers cost-effectiveness, budget, and other resource issues in addition to technical issues; develops and implements standards and procedures for multiple areas of technology., • Participates in development of standards, design and implementation of proactive processes to collect and report data and statistics on assigned systems; performs research and testing to verify impact and advisability of system installations; assists in development vendor support relationships., • Maintains in-depth knowledge and current certification in various areas of information technology., • Responsible for infrastructure design, performance modeling and capacity planning., • Independently provides guidance and leadership on architecture design initiatives., • Demonstrates ability to lead team through complex system design and implementation initiatives., • Ensures architectures are flexible and support the business needs by maintaining an understanding of business strategies and infrastructure capabilities., • Works with various technical resources across the team to facilitate the development of technical standards., • Possesses communication skills and ability to develop and present solutions to all levels of management, including executive levels., • Participates in requirements gathering, discovery, and interfacing with technical and business teams - establishing credibility in terms of experience, presentation and leadership of solutions development., • Evaluates proposed new systems, system changes and additions, provides oversight into the decision process., • Quickly and decisively acts in fast changing, unpredictable situations, shows tremendous amount of initiative in tough situations, is exceptional at spotting and seizing opportunities, proactively plans projects and tasks within application., • Applies advanced level understanding of assigned clinical/business operations, processes, and workflows. Discusses, and identifies dependencies with project team members and stakeholders. Maintains collaborative customer relationships; Ensures the needs of the customer are fully represented in all updates., • Reviews and provides feedback on documentation written by others. Articulates issues and complex concepts in appropriate manner based on the audience., • Possesses the skill to develop strong and positive relationships with management at all levels. Experience • Minimum Twelve (12) years of experience in large corporate systems environments working with complex IT systems., • Minimum Twelve (12) years of hands-on experience in infrastructure engineering, software development, system administration, system architecture, application architecture or data system architecture., • Minimum Twelve (12) years of hands-on experience with system or application performance modeling and tuning.Licenses, Registrations, or Certifications 8AM - 5PM Monday-Friday Work Type: Full Time

Job Description Sparks Group has partnered with a leading aviation manufacturer seeking a Facilities Project Specialist, In this role, you’ll guide enterprise efforts for the company's solar canopy project and other facilities construction projects, coordinating proponent groups and building committees to facilitate rational facility planning, budgeting, and scheduling. Preparing requests for proposals and managing facilities capital expenditure budgets, while maintaining high client, customer, and user satisfaction with services provided. Recommend and manage initiatives to increase and improve service delivery considering cost, schedule, and quality. This assignment is temporary and could last up to 24 months. Apply Now and call 703-620-6444 Primary Responsibilities: * Coordinates with all stakeholders to include proponent groups, engineers, contractors, property owners, and building committees to facilitate rational facility planning, budgeting, and scheduling. * Maintain high client, customer, and user satisfaction with services provided. * Support company Health & Safety program initiatives and ensure compliance to all assigned tasks and action items. * Ensures effective and timely written and oral communication with consultants and internal customers during all phases of design and construction. * Perform reviews and analysis of project controls (schedule and cost indexes and variances).. * Perform daily quality assurance inspections and reviews submittals, requests for information, change requests, and designs for adherence to project baseline documents. * Recommend and manage initiatives to increase and improve service delivery considering cost, quality, scope and schedule. * Ensure understanding of and adherence to contract requirements, business management requirements, and procurement requirements across the Workplace organization. * Monitors and reports on all phases of planning and construction to ensure that implementation and prescribed activities are carried out in accordance with specified objectives. * Prepares requests for proposals and conducts all necessary meetings to facilitate hiring architectural and construction management services. * Prepares Statement of Work that describe projects and desired outcomes. * Write and evaluate proposals and quotes to ensure selection of best vendors to deliver service considering cost, quality, scope and schedule. * Prepare, submit, and manage facility capitalized expenditure budgets and projects with the clients' goals and objectives addressed, track variances and ensure a smooth recovery process. * Partner with Workplace project resources to ensure leasehold acquisition, projects, build-outs, renovations and expansions are organized and limit disruption to the business. * Prepare project reports and control expenditures in accordance with budget allocations. * * Requirements: * Bachelor’s Degree or equivalent experience in Facilities Construction/Project Management/Engineering or related field. * 1 year in operations, maintenance, or construction of sizable solar generation site/project, electrical utility systems, or electric generation. * 2 years in Facilities or Construction project management as a project manager, assistant project manager, or project controls specialist. * Up to 5% Domestic Travel involved * Working knowledge and application of OSHA, NFPA, and ADA standards required. * Current knowledge of IBC and industry trends, best practices, technology. * Ability to read blueprints, construction drawings, and experience with significant construction/renovation projects * Ability to lead and motivate a diverse workforce. * Ability to work without direct supervision/self-motivator. * Ability to communicate effectively in verbal and written form in English. * Ability to write detailed reports explaining project status * Highly proficient in general office software systems, either Google Workspace or Microsoft Office Suite. * Microsoft Project or similar Project Management software. Preferred: * Master’s Degree or equivalent experience in Facilities Construction/Project Management/Engineering or related field. * 5 years in Facilities or Construction project management. * 3 years as a field construction engineer or building design engineer. * OR - * 3 years as a tradesperson or supervisor of a trade (electrical, plumbing, mechanical, or building construction). * PMP Certification * General knowledge of FAA, EASA, and ICAO standards. * Knowledge of estimating, budgeting, and scheduling practices. * SAP knowledge * AutoCAD knowledge #LI-DA2 This job is In-Person. We offer several comprehensive benefits package including health and life insurance, paid and unpaid time off, and retirement and savings plans to qualifying employees. Download the Sparks Group mobile app from Apple App Store or Google Play. Sparks Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, pregnancy, citizenship, family status, genetic information, disability, or protect veteran status.

Description The Staff Engineer is an individual contributor and technical leader, responsible for leading deep, complex, and/or high-risk technical projects. This role supports the organization by providing context and technical direction, defining technical specifications, developing reusable technical patterns, automating manual processes and tasks, and delivering robust and scalable solutions. They work closely with architects and other engineers to build target architectures and roadmaps to drive modernization efforts. Staff Engineers work with business and IT leaders and actively demonstrate core leadership skills such as critical thinking, judgment, active listening, analysis, problem solving, and communication. Key Functions/Duties of Position • Solution Architecture & Modernization o Establishes and instantiates engineering standards, patterns, and best practices within the Enterprise Content Management and Middleware teams and across other infrastructure teams. o Learns and assesses current-state platforms to develop target state architectures and roadmaps for modernization. o Stays abreast of vendor roadmaps and makes recommendations for including new features into target state architectures and roadmaps. o Influences buy-in and change through problem breakdown, business cases, data gathering and analysis, and sound judgment. o Partners with leaders, peers, centralized and subsidiary groups to create transparency of current state, future state, challenges, expected timelines and risks. o Collaborates with Enterprise Architecture to align solutions with strategic direction. • Technical Leadership & Mentorship o Sets technical direction for application engineering teams, providing expertise in modern integration, automation, containerization, cloud, and DevOps practices. o Effectively leads the evaluation, design, and implementation of key projects within the Middleware team and across other infrastructure teams. o Mentors and coaches other engineers, fostering growth in autonomy, critical thinking, problem solving, and technical maturity. o Leads code reviews, architectural discussions, and technical assessments. • Operational Excellence o Identifies and solves difficult and challenging technical problems, often beyond the capability of others on the team. o Performs comprehensive reviews on system changes. o Ensures reliability, performance, scalability, and security of application platforms. o Guides and validates proper monitoring and observability of applications and infrastructure. o Develops and maintains technical and process documentation. • Collaboration & Communication o Partners with business/application stakeholders to identify and understand problems/opportunities and translate requirements into technical solutions. o Communicates complex technical concepts to both technical and non-technical audiences. o Participates in cross-functional initiatives and represents application engineering in enterprise projects. • Continuous Improvement o Promotes innovation and challenges the status quo. o Identifies and addresses technical debt, process inefficiencies, and opportunities for automation. o Stays current with industry trends, emerging technologies, and best practices. Required: · 8+ years’ progressive engineering experience designing/developing/engineering solutions and leading multiple large scale and/or cross-domain initiatives. · 4+ years’ application development experience using object-oriented design, decoupled architecture, middleware, messaging, API development, and monitoring tools using Java, .NET, and/or different JavaScript libraries and frameworks. · 3+ years’ experience using authentication, certificate, keys, secure parameters, and code scanning tools within applications and application development processes. · 2+ years’ experience with multiple scripting languages (SQL, Python, JavaScript, PowerShell, Bash, Go, Ruby, etc.). · 2+ years’ experience working on public cloud platforms and architectures (Azure, AWS, GCP). · 2+ years working with third-party application, middleware, and/or infrastructure services. · Ability to thrive and produce results with little or no supervision in a fast-paced entrepreneurial environment. · Excellent written and oral communication skills with the ability to interact seamlessly at different organizational levels with both technical and business stakeholders across the company. · Ability to describe complex problems (technical or organizational) concisely, accompanied by thoughtfully proposed solutions. · Strong customer service focus and sense of urgency. · Ability to quickly adapt and learn modern technologies, methods, tools, and systems. · Uses advanced techniques, approaches, and processes to complete and influence work. · Superior problem solving and analytical skills. · Ability to create an atmosphere of teamwork and collaboration. · Ability to look at the “big picture” and see opportunities for improvement. · Ability to break opportunities for improvement into bite-sized chunks that can be pursued on a project-by-project basis. Skills middleware, workflow, ansible, python, perl, java, .net, azure, aws Top Skills Details middleware,workflow,ansible,python,perl,java,.net,azure,aws Additional Skills & Qualifications Education Requirement • Bachelor’s degree in computer science, Information Technology, or related field (or equivalent experience). Preferred · 2+ years’ experience as an Infrastructure, Systems, Integration, Software, or Solutions Architect. · 3+ years’ experience using modern DevOps and deployment practices and tools (e.g., pipelines, A/B testing/deployment, Canary deployments, Configuration as Code (CaC), Infrastructure as Code (IaC), etc.) · 2+ years’ experience using IBM platforms and tools (e.g., IBM FileNet, IBM BAW, IBM ODM, IBM MQ, IBM WebSphere). · 2+ years’ experience using Kubernetes, ECS, Docker, and/or other container orchestration environments/tools. · 2+ years using Agile development methodologies. * · 2+ years’ experience with Tomcat/Apache or other web application runtime environment. · Work history in financial services or insurance industries. Experience Level Expert Level Job Type & Location This is a Contract to Hire position based out of Dallas, TX. Pay and Benefits The pay range for this position is $62.50 - $74.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dallas,TX. Application Deadline This position is anticipated to close on Mar 12, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Date Posted: 2026-02-05 Country: United States of America Location: US-AZ-TUCSON-928 ~ 1151 E Hermans Rd ~ MULTI PURPOSE FAC 928 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon’s Air & Space Defense Systems (ASDS) strategic business unit (SBU) specializes in multi-domain integrated air and missile defense, advanced sensors, space-based systems, hypersonics, effectors and cyber solutions. Focused on program execution, business growth and the highest level of customer satisfaction, the ASDS team provides customers with unmatched capabilities of detection and sensing, command and control, and air-to-air, air-to-surface, and surface-to-air munitions to accomplish air, space and missile defense missions. Strike Initiatives, within ASDS, is our sub-strategic business unit focused on air-launched, penetrating effectors that provide highly versatile tactical capabilities and enable global strategic deterrence. Raytheon’s Air & Space Defense Systems SBU Engineering Team is currently hiring a Test Equipment Integrated Product Team Lead, Senior Principal Engineer for its Strategic Strike portfolio. This is an exciting and challenging environment where you will have the opportunity to take a design through verification and hand off to Prove In while partnering with multiple disciplines to shape innovative solutions for our customers. Join our organization and oversee the Test Equipment life cycle while interfacing with a variety of engineering disciplines, subject matter experts, Chief Engineers, Chief Technologists, the customer, and so many more to ensure we design, integrate, verify, and strengthen our systems to work the first time and every time for our warfighters! This is an onsite role located in Tucson, AZ. What You will Do * Update, maintain, and improve technical documentation for TE development and production efforts. * Lead and Support TE Design Verification testing/Data collection, prove-in activities and sustainment/maintenance. * Participate in Failure Investigations. * Facilitate knowledge transfer within and across IPTs/CPTs to include Cross-Functional collaboration and coordination. * Facilitate and drive transition to production efforts. * Own the scope and budget of a large group of control accounts. * Ensure technical rigor for all TE scope * Coordinate across teams and potentially contracts as applicable * Share program process knowledge * Mentor earlier in career engineers Qualifications You Must Have * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience. * Experience in at least 1 of the following areas: * Mechanical/Electrical development, integration, and qualification * Test Equipment Design and Verification * Fielding Test Equipment to a Government Customer * Test Equipment Maintenance for Production Support * Experience leading multidisciplinary teams. * Experience with Earned Value Management System (EVMS), Integrated Master Plan (IMP) / Integrated Master Schedule (IMS), and/or Risk and Opportunity Management. * Active and transferable Secret U.S. government issued security clearance is required prior to start date with the ability to obtain special program access prior to start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer * Advanced degree in STEM. * Experience as a subject matter expert in technical briefs / presentations, proposals, fracas. * Champion all of RTX values. * Experience with CREO, cPDM and analysis tools. * Familiarity with military systems; tactics, techniques, and procedures along with DoD customer infrastructure experience. * Understanding of Test Equipment Product Development Cycle. * Familiarity with system safety, reliability, configuration management, and evaluating / mitigating technical risks. What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation * Relocation Eligibility. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this ___ to read the Policy and Terms

Electrical Engineer PE (Group Manager) - Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $125,000 - $180,000 per year A bit about us: We are a full-service engineering consulting firm providing services for a broad range of projects and clients within the private and public marketplaces. Our design engineers provide cost-conscious, reliable, HVAC, plumbing and fire protection solutions to meet your project needs. Our commitment to client satisfaction is manifested in our technical expertise, project management and quality initiatives. With two generations of technical expertise combined with our business partnerships and the latest in Software and MEP technology, have earned us the admiration of our industry, the respect of our partners and the loyalty of our clients. With over 7 locations throughout the Tri-State area, our Team of professionals have the expertise to address your needs in a cost-effective and timely manner. Why join us? BENEFITS • Competitive Salary & Bonuses!, • Full Benefits Package!, • Flexible Work Schedules!, • Meaningful Work!, • Accelerated Career Growth! Job Details Sr. Electrical Engineer PE - Group Manager – Asbury Park NJ (Hybrid) We are seeking a Seeking a Senior Electrical Engineer with experience Leading a Team and Managing Projects. Successful candidates will have 8-10+ years of experience in Electrical Systems Design with experience Leading electrical design teams on several concurrent projects, with 2-4+ years of experience as Project Manager within an Engineering Consulting or Design/Build Firm. This individual will be a leader with the ability to assist the Principal in managing and guiding the Electrical Group. • Authorized to work in the United States (US Citizenship, Permanent Resident, or Green Card Holder.), • Bachelor's Degree (B.S.) in Electrical Engineering from ABET Accredited University or College, • Active PE License in NJ or NY, or ability to gain Reciprocity * Required *, • 8-10+ years of electrical engineering design experience within Engineering Consulting, building services, or Design/Build Firm., • Previous Project Experience in Commercial, Institutional, Higher Education, State/Federal Projects, Transportation Hubs, Stadiums/Sports & Entertainment Venues, Museums, or Healthcare Facilities., • Proficient in Revit and/or AutoCAD Software, • Ensure financial & technical project success while maintaining a high level of client satisfaction., • Strong technical knowledge of electrical systems; ability to investigate, identify and provide solutions to technical problems., • Experience in the preparation of technical reports for delivery direct to a client audience., • Responsibility in a team-based organization, combined with ability to work independently., • Knowledge of computational analysis tools such as electrical fault analysis and lighting design software., • Ability to problem solve and propose multiple solutions to Clients and objectively summarize the benefits and shortfalls of each., • Excellent client-facing and communication skills (verbal and written), with experience presenting (you will often be required to present solutions directly to 'c-suite' level stakeholders)., • LEED AP Accredited Desired, Not Required. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of pri

The Energetics and Propulsion Department is an engineering organization in the Hardware Engineering Directorate. Typically requires a Bachelor in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience. Project engineering skills and experience us

Job Description REC is seeking a Revit Drafter to support large-scale, high-profile technology and data center projects. In this role, you’ll contribute to the design and execution of complex construction efforts, supporting everything from detailed drawing production to field verification and project closeout. This position offers a dynamic blend of office-based design work and on-site field collaboration, ideal for a detail-oriented professional who enjoys both technical challenges and real-world application. What You’ll Do • Produce and maintain high-quality Revit and AutoCAD drawings, • Support data center construction projects from design through closeout, • Conduct field verification and site audits, • Assist with documentation, coordination, and schedule tracking, • Collaborate closely with internal teams and project stakeholders Requirements What You Bring • Strong communication and teamwork skills, • Excellent attention to detail and organization, • Ability to thrive in a fast-paced, deadline-driven environment, • Bachelor’s degree in construction management, engineering, or related field (preferred), • Working knowledge of construction and engineering principles, • Proficiency in Revit and AutoCAD

Job Description We are currently hiring a Project Manager to join us at our DFW Division. Overall Scope The Project Manager is responsible for the overall direction, completion and financial outcome of a construction project. Directs and supervises work of project administration, project Superintendents, and engineers to establish operational priorities and maintain satisfactory relationships with owners, subcontractors, etc. This level is capable of medium scale projects of 5 million to 10 million and with a minimum of 5 to 10 years total experience. Typical position titles include Project Manager and Project Manager II. Project Manager Duties Include: · Provide initial client contact to assess scope of work, schedule and resources necessary to successfully complete a project. · Prepare a complete estimate for selected project with a detailed review of plans, specifications and bid form. · Plan and organize a project under the directions of a Senior Project Manager or Division Manager. · Establish project objectives, policies, procedures and performance standards within boundaries of corporate policies. · Supervise the preparation of all change orders on the project. Negotiate all change orders on the project. · Monitor construction activities in conjunction with the onsite Foreman and Area Superintendent to ensure project is being built on schedule, and within budget. · Investigate any potentially serious situations and implement corrective measures within company guidelines, and under supervision. · Supervise the preparation of any and all change quotations for presentation to the prime client. Negotiate all change quotations to a conclusion. · Prepare monthly costing reports under the supervision of a Senior PM or Division Manager. · Manage financial aspects of contracts (progress billing, rental equipment, income/expenses) to protect the company’s interest and simultaneously maintain good relationship with the client. · Review any documentation prepared by Assistant Project Manager before submission. · Represent the company in project meetings. · The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties may be assigned based on the positions’ role within the business unit. Skills and Specifications · Supervisory Skills · Ability to schedule and multitask · Knowledgeable in building and construction · Problem solving aptitude · Computer literate · Attentive to detail · Possess good communication skills Education and Qualifications · High School Diploma · A degree in Construction Management or Project Management or equivalent experience. Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Company DescriptionWalker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio. We have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.Walker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio.\r\n\r\nWe have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: The Telecommunications Lead Installer - Level IV plays a crucial role in the installation, re-configuration, removal, and maintenance of Central Office and Data Center equipment, covering Transmission, Power, Infrastructure, and Fiber systems. This position requires leadership skills to supervise crew members and ensure high-quality performance with minimal supervision. Responsibilities: • Master installation skills per Telco Standard TP76300 and perform duties of Installer Level 4 with competence and accuracy as a Working Lead., • Execute comprehensive equipment installation across a wide range of systems including AC/DC Power, fiber systems, and supervisory/alarm systems., • Utilize knowledge of transport equipment from vendors like Ciena, Fujitsu, Cisco, Nortel, Nokia, DELL, and Juniper., • Lead installation projects and ensure all documentation is accurate and compliant., • Read and adhere to Method of Procedures, order specifications, and relevant documentation., • Supervise lower-level Installers/Technicians in installation and testing tasks., • Maintain compliance with company/customer installation document system updates., • Conduct quality audits to ensure adherence to industry and customer standards., • Resolve project-related issues using defined processes and interface effectively with clients and colleagues., • Perform advanced test, turn-up, and integration activities without supervision., • Install and manage equipment, cable trays, data cabinets, and associated cabling., • Conduct testing to document performance characteristics and resolve technical issues., • Minimum 8+ years of installation experience or equivalent training and experience in the communications installation field., • High school diploma and two years of technical education, or equivalent experience., • Proficient in laptop computing and applications, with MS Office skills., • Excellent verbal and written communication skills., • Valid driver's license and ability to pass pre-employment background checks; valid passport is a plus., • Comprehension of company/customer policies, procedures, and safety requirements., • Travel flexibility within the US and internationally, with expenses covered by the employer. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$68,000—$80,000 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionDescription: RIB U.S. COST is seeking Senior Construction Cost Estimators to join our Dallas Fort Worth areas team to provide conceptual through definitive estimates. RIB is a leader in providing project controls related services across all vertical markets within the construction industry. The ideal candidate will become part of team that is setting new standards in Project Delivery for industry in applying new methods and new technology to create innovative and value-added results to every step of the process. Knowledge, skills and abilities required: • Ability to develop estimates at multiple phases from planning through construction, • Knowledge of, and proficiency in discipline-related systems, • Four-year degree in a related field, • Fifteen (15) years of experience is required in the estimating field or in a related area which may include construction field engineering, contracting, claims and other industries relating to estimating., • At least five (5) years' experience with a contractor during the construction phase of a project is strongly desired. Experience with large infrastructure and/or aviation projects required., • Proficiency in computer skills including MS OFFICE suite, • Proficient utilizing estimating tools, • Effective oral and written communication skills, • Ability to work independently and in a collaborative team environment, • Exhibit a high degree of professionalism in the production of deliverables and in interactions with fellow employees and clients, • Strong desire to learn or expand upon new methods and software.Requirements: Duties and responsibilities include, but are not limited to, the following: • Prepare and/or coordinate the preparation of full estimates on large and complex projects as required by client's documents, • Analyze and negotiate contractor change orders and claims on behalf of the client, • Consult with clients, architects, subcontractors, and material suppliers to discuss and formulate estimates, effect cost reductions, and resolve issues. We offer a competitive benefits package to full-time employees, including the opportunity to participate in an Employee Stock Ownership Program for, Schneider Electric, a Fortune 500 Global company. RIB U.S. COST is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, genetics, disability, age, veteran status, or any other characteristic protected by law.

Job DescriptionSalary: Orion Security Solutions is seeking a qualified Security Systems Designer for a full-time position to be based in Carrollton, TX. Orion Security Solutions (OSS) is an elite integration firm with expertise in advanced technical, physical, and information technology (IT) security solutions. OSS distinguishes itself from competitors by employing the industrys best and offering the highest quality solutions to its customers. The Security Systems Designer is responsible for designing, engineering, drafting, and documenting physical security systems, including Access Control, CCTV/Surveillance, Intrusion Detection, and Structured Cabling systems for projects of moderate to high complexity. This role ensures high-quality, accurate designs that support efficient installation, operational reliability, and customer satisfaction. The position reports to the Director of Design and collaborates closely with lead and peer designers, Sales, Project Management, and Technical teams to continuously improve standards, best practices, and operational efficiency. Occasional travel may be required to support site surveys and project development. Duties and Responsibilities • Produce accurate design drawings, layouts, and documentation for physical security systems using CAD software., • Maintain and apply CAD standards, templates, title blocks, layering conventions, and organized file structures to ensure consistent and high-quality deliverables (AutoCAD preferred)., • Interpret project specifications, architectural drawings, and technical requirements to develop efficient and compliant system designs., • Perform basic engineering calculations as required (heat load, power requirements, voltage drop, cable routing, etc.)., • Conduct site surveys to collect field data, validate design assumptions, and support project scoping and quoting efforts., • Collaborate with Sales, Project Managers, and Technical staff to optimize system layouts and resolve design challenges., • Prepare accurate As-Installed drawings based on field markups and project closeout documentation., • Maintain working knowledge of Orion Security Solutions product lines and emerging technologies., • Actively participate in continuous improvement initiatives, including development of standards, workflows, and best practices., • Demonstrate strong attention to detail, organization, and accountability while managing multiple priorities. Skills and Abilities • Strong proficiency in CAD drafting and design principles, including layering, blocks, X-references, viewports, and file management., • Ability to design integrated physical security systems, including Access Control, CCTV/Surveillance, Intrusion Detection, and Structured Cabling., • Strong technical aptitude with the ability to visualize component interaction within real-world installation environments., • Ability to read and interpret technical drawings and documentation, including floor plans, riser diagrams, wiring diagrams, schematics, and control panel layouts., • Effective communication and collaboration skills across technical and non-technical teams., • Strong problem-solving, analytical, and organizational skills., • Willingness and ability to travel to project sites as needed. Minimum Qualifications: • Minimum two-year technical degree in electrical/electronic systems or related field or equivalent experience, • Familiarity with local AHJs and permitting requirements, • Strong oral, written communication and analytic skills., • Strong time management skills and the ability to multi-task., • Ability to adjust to shifting priorities, • Must possess a strong sense of urgency, • State of Texas license Desired Qualifications • Three years of experience in electronic systems design and installation, • 1+ years of AutoCAD experience, • Experience with Bluebeam, • Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Visio, Teams) Orion Security Solutions is an Equal Opportunity Employer and considers all applicants without regard to any legally protected status.

Job Description Call today for an immediate phone screen: Clemencia at 260-282-6179 MUST HAVE PREVIOUS PROFESSIONAL DRIVING EXPERIENCE Pay: $24.00–$26.00 per hour Avail Work Schedule: Friday-Tuesday/Wednesday-Sunday, 2:30 PM–11:00 PM (30-minute lunch MUST BE ABLE TO TYPE 35 WPM AND HAVE A CLEAN DRIVING RECORD FOR 36 MONTHS Join the Future of Transportation We’re seeking experienced and safety-focused professionals to join our 2026 Autonomous Vehicle (AV) Operations Team. If you have hands-on experience driving professionally and/or possess a strong technical background, we want to hear from you! Key Responsibilities • Safely operate autonomous vehicles in compliance with all traffic laws and company procedures., • Collect and document performance data to support ongoing system development., • Conduct pre- and post-drive safety checks, ensuring vehicle readiness each day., • Monitor system performance and provide detailed, real-time feedback to engineering and operations teams., • Remain alert, professional, and distraction-free while behind the wheel., • Experience as a professional driver (even in rideshare or food delivery), • Minimum of 36 months of safe driving experience with no tickets or violations., • Valid U.S. driver’s license (active for at least 3+ years)., • No DUIs, drug, or alcohol-related offenses in the past 5 years., • Strong situational awareness with the ability to respond calmly and effectively in unexpected driving situations., • Excellent communication skills and sharp attention to detail., • Comfortable operating vehicles in diverse road and weather conditions., • Prior AV testing or technical systems experience., • Certification in Safe or Defensive Driving., • Hourly rate: $21.00–$27.00 per hour (based on experience)., • Pre-tax commuter benefits., • Employer-subsidized healthcare plans., • Flexible Spending Account (FSA) for healthcare-related expenses., • Company-paid short- and long-term disability and life insurance.

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering, and construction industries, focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelopes, energy efficiency, sustainability, code advisory, and construction advisory projects. SOCOTEC’s combination of expertise, experience, and methods is increasingly recognized as best-in-class, fueling significant growth. SOCOTEC offers competitive salary and benefits, mentorship, training, and social activities. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description We’re looking for a Financial Systems Manager to lead the administration, optimization, and integration of our financial systems. This role is a critical bridge between Technology and Finance —ensuring systems run smoothly, compliance standards are met, and data drives smart business decisions. What You’ll Do • Own Financial Systems: Manage and maintain ERP platforms (Deltek Vantagepoint) and related tools., • Drive Innovation: Oversee system upgrades, testing, and implement new features, including AI-driven enhancements., • Enable Insights: Build dashboards for revenue recognition, project margins, and labor tracking using Power BI., • Ensure Compliance: Maintain GAAP standards, perform access reviews, and support audit requirements., • Lead Projects: Deliver initiatives like revenue recognition standardization and dashboard development., • Collaborate: Act as the go-to liaison between Finance, IT, and external vendors., • Perform all other duties as assigned by your supervisor or manager. Qualifications, • Bachelor’s degree in Finance, Accounting, Information Systems, or related field., • 5–8 years in a technology role; 1–3 years managing financial systems and process optimization., • Strong understanding of GAAP compliance and revenue recognition. Must Have: • Deltek Vantagepoint/Vision (ERP), • Microsoft Power BI, • Advanced Microsoft Excel, • Microsoft 365 Suite (Teams, SharePoint, Outlook), • Microsoft Azure AD & Entra (identity management & automation), • QuickBooks, Xero, Concur, ADP, Paychex, Paylocity, HighRadius, Fibus, • SQL or similar database tools, • Power Apps / Power Automate / Fabric, • AI-driven financial tools, • Multi-company ERP consolidation, • Microsoft 365 Dynamics Additional Information For more information, please visit All your information will be kept confidential according to EEO guidelines. SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer.

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Permit Supervisor to establish and define the duties, responsibilities, authority, accountability and reporting relationships for the Project Supervisor at CCI Systems, Inc. The responsibility of this position is to provide directions to Make Ready Analysts and Permitting Coordinators if need be and support prioritization of tasks. Responsibilities • Assign and monitor work for their teams., • Maintain SLAs across multiple projects/clients through reporting and coordination with their direct reports., • Meet regularly with key stakeholders (internal and external)., • Provide key details of project statuses to leadership and clients as needed., • Provide feedback to leadership to be proactive about project success., • Understand and follow CCI processes and permitting processes., • Strive for customer satisfaction., • Consistent high-quality work being sent to the customer within SLA., • Oversee and approve invoices., • Effective communication skills across different audience groups., • Have technical skills that apply to the permitting field., • Field/construction background,, • Promote company image through business practices and embodying CCI's habits and values. Qualifications • A minimum of five years of supervisory experience in engineering design or related field, • Analytical and observational skills, which demonstrate ability to, plan projects, review/recommend technical specifications, coordinate staffing needs, communicate, and manage all aspects of a project., • Must be willing to learn new product lines and technologies to serve the departmental needs and goals., • Must be able to handle employee issues effectively and in a timely manner., • Ability to provide strong leadership through coaching and mentoring with a focus on customer service., • Ability to motivate employees in a challenging and dynamic business environment., • Exceptional communication skills - both written and verbal., • Knowledge of human-computer interaction principles (K0036), • Knowledge of information technology (IT) acquisition/procurement requirements and life cycle process., • Strong behavioral and high emotional intelligence., • Proficient knowledge of the Microsoft Office including Excel, Word and PowerPoint as well as Internet., • Well-organized with an ability to work confidently in a high-pressure/high-energy environment., • Ability to take initiative, make decisions and handle various tasks simultaneously while working efficiently, effectively, and independently under minimal supervision. Shift is full-time Monday – Friday between the hours of 8:00 am – 5:00 pm CST. Must be flexible and willing to work outside normal business hours as necessary. Additional Information • Approximately 25% travel may be required., • Must have a valid driver's license and acceptable driving record.

Job DescriptionCompany Description We Are Bosch. At Bosch, we shape the future by inventing high-quality technologies and services that spark enthusiasm and enrich people’s lives. Our areas of activity are every bit as diverse as our outstanding Bosch teams around the world. Their creativity is the key to innovation through connected living, mobility, or industry. Let’s grow together, enjoy more, and inspire each other. Work #LikeABosch • Reinvent yourself: At Bosch, you will evolve., • Discover new directions: At Bosch, you will find your place., • Balance your life: At Bosch, your job matches your lifestyle., • Celebrate success: At Bosch, we celebrate you., • Be yourself: At Bosch, we value values., • Shape tomorrow: At Bosch, you change lives. Job Description The Executive Director - Ductless and Water Product HVAC has full responsibility for leading the Ductless and Water Product segment across the AME region, with end-to-end accountability for strategy, execution, and financial performance. This role owns the profit and loss (P&L) for the business and leads a multidisciplinary organization across engineering, product management, and project management. The position is responsible for driving profitable growth, managing a competitive and compliant product portfolio, and transforming the organization toward a more agile, product-oriented, and customer-driven operating model. Acting as the primary bridge between product development and market execution, this leader ensures global platforms are effectively adapted to regional customer needs while maintaining scale, quality, and cost competitiveness. Key Responsibilities • Own full P&L accountability for the Ductless and Water Product business, directly impacting revenue, profitability, and long-term value creation., • Lead the transformation of Ductless and Water Product into a fully product-oriented, customer-centric organization., • Oversee the complete product lifecycle across multiple ducted residential product families, from concept through launch and lifecycle management., • Ensure products meet quality, safety, regulatory, and certification requirements across all served markets., • Partner closely with central engineering, quality, procurement, and manufacturing to ensure seamless execution from development through production., • Lead coordination across North American regions, including the U.S., Canada, and Mexico, ensuring consistency and alignment., • Promote and embed agile ways of working to accelerate delivery, increase responsiveness, and improve cross-functional collaboration., • Foster innovation through customer insights, technology scouting, and trend analysis to maintain competitive advantage., • Serve as a chief-hat leader with responsibility for a multi-layered organization (three levels below) spanning engineering, product management, and program management., • Operate effectively across international teams and interfaces (AME, Mexico, India), demonstrating strong cultural intelligence and adaptability., • Participate in relevant industry and regulatory committees to shape standards, influence policy, and represent the business externally.Qualifications Required Qualifications & Experience • Bachelor’s degree in business, finance, or engineering related discipline; MBA or Master's degree preferred., • 10+ years of experience in HVAC systems, ductless and water products, or closely related industries (e.g., consumer electronics with complex product portfolios)., • Proven track record of owning and managing large-scale P&L responsibilities., • Deep understanding of product portfolio management, global-to-local product adaptation, and go-to-market dynamics., • Strong technical foundation in product development, manufacturing, and lifecycle management, supported by specialist teams., • Demonstrated expertise in Ductless and water product applications and rating/certification processes., • High financial acumen with the ability to build and evaluate investment cases., • Experience leading large, cross-functional, and geographically distributed organizations., • Strong strategic, communication, and change leadership skills, with experience driving agile transformations. Additional Information Equal Opportunity Employer, including disability / veterans

GENERAL DESCRIPTION The Project Manager is responsible for the overall leadership and management of the project, in a role and reporting structure as designated for the project. The Project Manager is further responsible for the overall administration of the project, including subcontracting, procurement and purchasing of trades and vendors, design management, client management, scheduling, documentation, meetings, reports, document control and management, and cost management, including budgets and internal cost reporting, profitability, subcontractor and vendor payments, owner billings, and change orders. The Project Manager collaborates closely with the Superintendent in a role as outlined in the organizational and reporting structure. The Project Manager serves as the primary liaison with the Client and Design Team, and subcontractors. Project Manager, I should be capable of all duties of Assistant Project Manager, and should have previously demonstrated success in that role, or an equivalent role. Project Manager I should be capable of successfully managing a project up to an approximate worth of around $5M at the entry level to around $20M at the upper range of the position. PRINCIPLE AREAS OF RESPONSIBILITY In general, the primary areas of responsibility are: • Project budget, • Project schedule, • Project safety, • Project quality, • Project profitability and cost controls, • Project documentation, communication, and document control, • Contract Management, • Design management and Change management., • Client relations and communication, • Subcontracting, purchase orders, procurement, purchasing., • Client and subcontractor/vendor billings and payments, • Enhancing Business development opportunities by performance and relationships, • Manage, training, and development of subordinate staff. GENERAL LISTING of JOB DUTIES and RESPONSIBILITIES The following is a general listing of job-related duties. This list is not intended to be an exhaustive list of all duties, responsibilities or skills required for this position. These may be modified, added to, or eliminated for the specific requirements of the assigned project. Some of these duties may be delegated to subordinate staff according to the project. • Review of and assistance with the budget/estimate for complete understanding of the project scope and budget. Establishment of project budget cost coding breakdown and enter in JDE., • Reviews of all subcontractor and vendor bids and perform procurement by the de-scoping and interviewing process in collaboration with preconstruction and the project team., • Prepare detailed scopes of work for all subcontractors and purchase orders (including all schedule requirements and any other obligation required by the subcontractor or vendor), issue and execute the formal agreements (within limits of authority). Ensure Superintendent and all staff are familiar with subcontractor work scopes., • Conduct preconstruction meetings (with Superintendent) with all subcontractors as they begin work on site. Meetings are to cover all project procedures, including the company safety rules, contract document requirements, schedule and the level of quality expected., • Develop, with the Superintendent, a rolling punch list of substandard and deficient work items that must be corrected by the company or subcontractors in a timely manner with the goal of achieving a zero-punch list at project completion. Learn what the Owner's needs and expectations are so these areas can be managed and educate the Owner to what he can expect., • Oversee the construction and renovation of pharmaceutical manufacturing facilities, specifically those involved in the production of Active Pharmaceutical Ingredients (APIs)., • Ensure all construction activities comply with industry standards, GMP regulations, and FDA guidelines., • Coordinate with engineering teams to integrate specialized equipment and systems required for API production., • Thorough review and understanding of the Owner's contract to ensure compliance with all contractual requirements., • Collaborate with superiors to ensure proper project staffing., • Establishes the overall project's procedures and execution plan., • Works with the Superintendent and subcontractors to prepare the overall detailed project schedule. Ensure that the schedule is incorporated into appropriate subcontracts and purchase orders. Works with Superintendent to ensure the schedule is updated a minimum of once a month or more often as necessary. Monitor critical path activities frequently to document and if necessary, intervene to keep project on or ahead of schedule. When project is 90% complete, assist the Superintendent in preparing Work Completion Lists to help ensure the project is fully completed in a timely manner., • Establishes the project document control system to ensure the project is using the most current contract documents for construction. This includes the system to initiate and monitor Request for Information (RFIs) as well as the shop drawing control and management., • Responsible for the overall communication and documentation on the project, including the filing system, letters, emails, meeting minutes, correspondence, and all reports., • Attend weekly subcontractor meetings and prepare meeting minutes as documentation and follow-up. Involved as participant or lead, according to project responsibility., • Staff leadership position for the Owner/Architect meetings with required minutes and documentation., • All aspects of cost and profitability management. This includes change orders, internal cost coding, profitability analysis, and all other logs, reports, and tools to review, evaluate and manage cost expenditures., • Approval of subcontractor and vendor billings and invoices for payment after Superintendent has approved., • Preparation and submission of monthly billings to the Owner., • Monitor labor, material, and equipment costs with Superintendent to maintain budget. Prepare monthly status reports and progress reports., • Review safety program being implemented on site with Superintendent to ensure compliance., • Develop relationships with Clients for possible repeat business. Participate in business development activities and assist in preparation of proposals and promote productive client relationships., • Provide leadership in the professional and career development of subordinates as well as timely and fair performance evaluations. Provide mentoring, training and development as needed. Maintain effective communication with clients. Understand the client's needs to achieve an acceptable level of satisfaction., • Perform all the closeout documentation required. EDUCATION AND EXPERIENCE • BS/BA degree in engineering, architecture, or construction management., • Proven prior success at Assistant Project Manager level, or equivalent role. Already operating in general at Project Manager I level., • As a general guideline, there is a minimum of five (5) years' experience in the construction industry, with at least two (2) in the position of Assistant Project Manager. KNOWLEDGE AND SKILL REQUIREMENTS • Those of Assistant Project Manager plus:, • Sound understanding of essential job functions, duties, and responsibilities of Superintendent and general understanding of Senior Project Manager., • Competent with will computer requirements necessary for JDE profitability forecasting and reporting., • Additional technology skills, • Planning and scheduling, • Cost Control, • Additional leadership skills, • Management and Leadership styles, • Control conflict resolution., • Negotiation techniques, • Managing workforce diversity Physical Requirements: • Ability to perform physical activities such as climbing, lifting, balancing, walking, and handling materials., • Must be able to work in various weather conditions, including extreme heat and cold., • Capable of standing and walking for extended periods., • Ability to lift and carry up to 50 pounds. Equal Employment Opportunity Statement: BE&K Building Group is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship.

Role Overview: The Head – Technical Product Management will lead and oversee the technical product management function for software solutions in the Transmission & Distribution (T&D) Automation & Control domain. This role will be responsible for defining product strategy, driving innovation, and ensuring successful execution across the product portfolio, and supporting technical sales efforts in the USA. Key Responsibilities: Product Strategy & Roadmap: • Define and execute the product vision and strategy for software solutions in T&D Automation & Control (e.g., SCADA, Field Force Automation, DERMS, Power Plant Controllers, Hybrid Energy Management System etc.)., • Develop and maintain a multi-year product roadmap aligned with market trends, regulatory requirements, and emerging technologies., • Ensure a strong alignment between business needs, customer demands, and technology advancements. Team Leadership & Management: • Lead, mentor, and develop a team of Technical Product Managers responsible for various software solutions., • Establish a strong product management framework, including agile methodologies, product lifecycle management, and go-to-market strategies., • Foster a culture of innovation and collaboration across cross-functional teams, including engineering, sales, and customer success. Product Development & Execution: • Define and prioritize feature development, ensuring best-in-class solutions for grid automation, controls, and energy management., • Collaborate closely with development teams, engineering teams and regional project delivery teams to ensure timely and high-quality software delivery., • Drive the adoption of modern cloud, AI, and edge computing technologies in T&D automation products. Market & Customer Engagement: • Engage with utilities, regulators, and industry stakeholders to understand market dynamics and customer pain points., • Stay ahead of industry standards, cybersecurity requirements, and evolving grid modernization trends., • Support sales and marketing teams in product positioning, competitive analysis, and business development. Technical Sales Support for USA: • Act as the technical liaison between product teams and the sales organization in the USA., • Provide technical pre-sales support, including product demonstrations, RFIs/RFPs, and solution presentations., • Work closely with sales, business development, and customer success teams to drive customer adoption and expand market share., • Support the development of sales collateral, whitepapers, and competitive intelligence to strengthen go-to-market efforts., • Engage with key USA-based customers to gather feedback and translate their needs into product enhancements. Financial & Business Impact: • Optimize pricing, licensing, and monetization models to maximize customer adoption and profitability., • Define and track key performance indicators (KPIs) to measure product success. Key Qualifications & Experience: • 15+ years of experience in Technical Product Management for T&D Automation & Control software., • Strong background in SCADA, ADMS, DERMS, Renewable Power Plant Controls, Protection & Automation, Grid Analytics, Field Force Automation, Computerized Maintenance Management Systems., • Expertise in software development, cloud platforms, AI/ML, and edge computing in power systems., • Proven ability to lead and scale high-performing product management teams., • Experience working with utilities, regulatory bodies, and grid modernization initiatives., • Strong understanding of industry standards (IEC 61850, CIM, IEEE 2030.5, OpenFMB, NERC CIP, etc.)., • At least 3 years’ experience in technical sales, sales engineering, or supporting sales teams in the North American market is a plus., • Excellent communication and stakeholder management skills., • MBA / Master’s in Power Systems, Electrical Engineering or a related field preferred. Why Join Us? • Lead the future of T&D and Renewable Automation & Control software and drive industry transformation., • Work with a world-class team of engineers, data scientists, and industry experts., • Opportunity to influence global utilities and energy transition initiatives.

Role Overview We are seeking a hands-on, high-impact Global Network Director to lead, align, and deliver across a large, distributed global organization. This leader will operate with a builder mindset — architecting, modernizing, and scaling a global network ecosystem that supports enterprise offices, hyperscale data centers, and private cloud infrastructure. The role requires a rare combination of deep technical credibility, strategic alignment with executive leadership, and the ability to execute at speed. This is not a maintenance role — it is a transformation mandate. Scope of Responsibility Oversight includes: • Enterprise administration offices, • Global sales offices, • Design offices, • Enterprise data centers, • Hyperscale data center environments Budget ownership and operational accountability are expected at scale. Core Mandate • Lead and deliver a global network transformation, • Treat Network as a Product / Network as a Service, • Drive an automation-first infrastructure strategy, • Align network strategy tightly with enterprise vision and business objectives, • Build and evolve teams end-to-end (hire, mentor, scale, optimize), • Execute both strategic roadmap creation and hands-on architectural oversight Technical Requirements Network Architecture • Deep expertise in spine-leaf architecture (strong preference), • Experience with Arista or Cisco (leading or participating in Cisco-to-Arista transformation preferred), • Design and build enterprise and hyperscale data centers from scratch, • Network engineering leadership at enterprise scale, • Strong automation mindset (Terraform / DevOps frameworks), • Infrastructure-as-Code expertise, • SRE / NRE operational philosophy Hands-on experience with: • Palo Alto, • Fortinet Data Center & Cloud Strategy • Build and operate modern private cloud infrastructure, • Maintain strong AWS and Azure footprint, • Cloud-agnostic mindset with modern cloud-native mentality, • Lead investments in private data centers as GPU costs and scale requirements increase, • Balance on-prem infrastructure with evolving Software-as-a-Service models Ideal Background • Experience in high-growth technology environments preferred, • Proven track record delivering large-scale network and data center transformations, • Experience treating the network as a product rather than a utility, • Strong execution history — not just strategic oversight Leadership Profile • Builder mentality — energized by creating from scratch, • High energy, delivery-oriented, and hands-on, • Capable of learning, teaching, and scaling teams A–Z, • Strong alignment with executive leadership on strategy and execution, • Long-term ownership mindset What Success Looks Like • Fully modernized, automation-first global network, • Successful Cisco-to-Arista transformation, • Scalable private cloud and hyperscale data center capability, • Network operating as a product with strong internal service delivery, • High-performing global team aligned to strategy and execution

Job Summary Under limited supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality. Job Description Responsibilities: Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed. Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis. Perform root cause analysis of major downtime events. Assist maintenance mechanics in work that requires two people or when operational needs demand. Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs. Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems. Required Experience: Education High school diploma or equivalent Work Experience 3 year of experience with conveyor, automation, or robotics equipment repair and maintenance Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems - Willing to travel at least/up to 10% of the time for business purposes (within state and out of state). Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week. Must be willing to learn new equipment as it is brought on-line. Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head. Willing to operate material handling equipment (i.e. fork truck). Write documents and reports using writing instruments and computers Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Willing to travel at least/up to 10% of the time for business purposes (within state and out of state). Must be willing to work overtime as needed. Preferred Qualifications Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent. Graduate of an apprenticeship program or hold current trade certification. At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet. Physical activities necessary to perform one or more essential functions of the position: Ability to bend, twist, reach, push, lift for extended periods daily - Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head. Willing to operate material handling equipment (i.e. fork truck). - Write documents and reports using writing instruments and computers - Read information, often in small print (drawings) Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization. The anticipated salary range for this position: $28.50 - $41.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold. Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For a more comprehensive list of our benefits please click here . For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp. We’re dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page here . Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.

Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five (5) years of Database Engineering experience.

The main function of a non-IT project manager is to plan, direct, or coordinate activities in such fields as engineering, research and development, financial systems and product roll-out, or any other non-IT based project. Analyze technology, resource needs, and market demand to plan and assess the

Propulsion Engineer - Cutting Edge Space & Defense Products! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $60 - $125 per hour A bit about us: With numerous offices across the country we are an industry leading Space Development company. We specialize in the design, manufacture, integration, and test of critical spacecraft components. We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications. If you are an experienced Mechanical / Propulsion Engineer looking to develop cutting edge products, then please apply! Why join us? Do you want to work with some of the nation’s best Clients like NASA and Boeing? We do too! • Meaningful Work!, • Best in Class Firm!, • Gold Level PPO Heath Insurance - 75% Covered!, • Competitive Compensation Package!, • Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Responsibilities: As a Mechanical Propulsion Engineer, your responsibilities will include: 1. Leading the technical development for mechanical subsystems, including propulsion., 2. Providing propulsion subsystem technical expertise and guidance to the engineering team., 3. Performing technical risk assessment and mitigation for space-based mechanical and propulsion subsystems., 4. Working closely with other engineers and scientists to design, analyze, and test propulsion systems., 5. Using mechanical design and analysis tools to create effective and efficient propulsion systems., 6. Collaborating with cross-functional teams to ensure the successful integration of propulsion subsystems into the spacecraft., 7. Staying updated on the latest advancements and trends in propulsion technology and incorporating them into our systems where applicable., 8. Documenting all stages of the design and development process for future reference and improvement. Qualifications: To be considered for the role of Propulsion Engineer, you must possess the following qualifications: 1. A Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. A Master's degree or higher is preferred., 2. A minimum of 7 years of experience in propulsion engineering or a related field., 3. Demonstrated experience providing propulsion subsystem technical expertise., 4. Proficiency with mechanical design and analysis tools., 5. A solid understanding of Geometric Dimensioning and Tolerancing (GD&T)., 6. Excellent problem-solving skills and the ability to think critically and creatively., 7. Strong communication and teamwork skills, with the ability to work effectively in a collaborative environment., 8. A passion for space exploration and a commitment to contributing to the future of the space industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Inventing and commercializing technologies that solve global challenges This Jobot Job is hosted by: Gene Choi Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $125,000 per year A bit about us: Based in Butte, Montana we are a R&D company who has been focusing on Engineering and Manufacturing solutions for the last 25 years! We are actively looking for a Senior Mechanical Engineer with an advanced degree and a minimum of 10+ years within a manufacturing environment. Why join us? • Competitive Base Salary!, • 401K, PTO, and excellent benefits!, • Accelerated Career Growth! Job Details Responsibilities: • Take responsibility for assigned projects from inception to completion., • Bachelors or Master of Science Mechanical Engineering, preferred, (ABET Accredited), • Ten years of experience in Mechanical Design., • SolidWorks proficiency, • Finite Element Analysis expertise (ANSYS preferred) Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Fantastic firm, great reputation, above market salary ranges - Healthcare focused architecture firm looking for senior leadership to help continue expanding their healthcare team This Jobot Consulting Job is hosted by: Henry Chung Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $130,000 per year A bit about us: We are a comprehensive design company providing architecture, interior design, MEP engineering, and consulting on medical equipment planning and technology. Our clientele spans healthcare, higher education, government, and commercial sectors nationwide. We bring a wealth of diversified expertise to each project we undertake. Why join us? Flexible work hours Generous PTO accrual rate 9 paid holidays annually Competitive salaries Life, health, dental & vision coverage 401(k) plan Career growth Company-paid continuing education & professional development opportunities Job Details Lead and coordinate with subcontractors and vendors to ensure the successful completion and delivery of projects. Cultivate and sustain a collaborative and professional working atmosphere within the project team, providing leadership through staff development and mentorship. Aid senior management in defining and validating project scope, fees, budgets, and contractual agreements with consultants. Engage with clients to ascertain functional and specific requirements, and compile design information including specifications, materials, colors, equipment, estimated costs, and construction timelines. Maintain consistent and timely communication of project details between clients, internal teams, consultants, and contractors to address technical issues effectively throughout the project lifecycle. Utilize Deltek Vision tools to manage projects, including creating work plans encompassing budgets, scopes, consultants, schedules, fees, costs, and additional services. Collaborate in the preparation of project presentations and conduct work sessions with clients and consultants during schematic, design development, and contract document phases. Review project documents for compliance with building codes and accessibility standards, ensuring adherence to our established guidelines. Oversee construction document accuracy in reflecting design intent and ensuring project profitability. Implement and uphold the Quality Assurance Program throughout the project duration. Identify potential business opportunities and foster existing client relationships, while actively seeking out new projects. Participate in selected marketing and business development endeavors, contributing to the creation of fee proposals. Develop and nurture positive relationships with consultants, contractors, and relevant agencies. Qualifications: • Architectural registration required with current license, NCARB registration preferred. LEED Green Associate Accreditation desired., • Bachelor’s Degree in Architecture or equivalent in education or experience, Master’s degree preferred, • 8-15 years of experience as in Project Architect or Project Management position in an AEC firm, • Commercial, Healthcare or Government project experience, • Revit, • Deltek is a plus Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Product Manager of HR Applications - FULLY REMOTE - Great Benefits This Jobot Job is hosted by: Dallas Gillespie Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $130,000 - $170,000 per year A bit about us: Major University Hospital with an exceptional reputation. Why join us? Fully remote position. Exceptional Benefits package. Job Details Job Details: We are currently seeking a dynamic and experienced Product Manager for HR Applications: Kronos, Workday, Healthstream. This role will be responsible for overseeing the strategic planning, development, implementation, and maintenance of our HR applications. The ideal candidate will have a strong background in engineering, coupled with extensive experience in managing HR applications, specifically Healthstream. This role is crucial to the successful operation of our HR department, and by extension, our entire organization. The Product Manager will be a key player in the development and execution of our HR technology strategy, ensuring that our systems and processes are optimized to meet the needs of our employees and our business. Responsibilities: 1. Manage the entire product life cycle from strategic planning to tactical execution., 2. Define and implement product strategy and roadmap, ensuring that it aligns with the overall company and HR vision., 3. Collaborate with various internal teams (e.g., HR, IT, Operations, etc.) to define product requirements and develop implementation plans., 4. Lead the design, development, and management of HR applications, ensuring that they meet the needs of the business and its users., 5. Oversee the implementation of new HR applications and manage the upgrade of existing ones., 6. Conduct market research and stay abreast of the latest trends in HR technology., 7. Evaluate and select vendors, negotiate contracts, and manage relationships., 8. Provide training and support to HR application users., 9. Monitor the performance of HR applications and make necessary improvements., 10. Ensure that HR applications comply with all relevant laws and regulations. Qualifications: 1. Bachelor's degree in Engineering, Computer Science, HR, or a related field. A Master’s degree will be an added advantage., 2. Minimum of 2 years of experience in product management, with a focus on HR applications., 3. Proven experience with Healthstream, Kronos, and Workday is required., 4. Strong knowledge of HR processes and best practices., 5. Strong project management skills, with the ability to manage multiple projects simultaneously., 6. Excellent problem-solving skills, with the ability to think strategically and analytically., 7. Strong communication skills, with the ability to effectively communicate complex concepts to a variety of audiences., 8. Ability to work effectively in a fast-paced, dynamic environment., 9. Strong vendor management skills, with the ability to negotiate and manage contracts., 10. Strong understanding of data privacy regulations and HR application security. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Supply chain management software delivers end-to-end visibility using IoT, RFID, and GPS tracking This Jobot Job is hosted by: Gene Choi Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $130,000 per year A bit about us: Based in Irvine, CA we are an established software solutions company in need of a very talented Pre-Sales Solution Engineer to join our collaborative team. This position will support the delivery of mission critical technology and solutions to Fortune 500 and government customers globally. Why join us? • Competitive Base Salary!, • 401K, PTO, and excellent benefits!, • Accelerated Career Growth!, • Stock Options! Job Details Responsibilities: 1. Collaborate with the sales team to understand customer requirements, provide technical expertise and advice, and develop customized solutions., 2. Develop and present detailed technical proposals and demonstrations to customers, showcasing the features and benefits of our products and services., 3. Assist in responding to RFPs and RFIs, ensuring the technical accuracy and comprehensiveness of responses., 4. Maintain an in-depth understanding of our product portfolio, staying updated on new features and enhancements., 5. Provide feedback to the product development team based on customer feedback and market trends., 6. Work closely with the post-sales team to ensure smooth implementation and customer satisfaction., 7. Develop and maintain strong relationships with customers, understanding their business needs and strategies. Qualifications: 1. Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field., 2. Minimum 5 years of experience in a pre-sales role in the Tech Services industry., 3. Proven experience with ERP, Supply Chain, Inventory, CMMS, and SQL., 4. Strong knowledge of RFI and RFP processes., 5. Excellent presentation and communication skills, with the ability to explain complex technical concepts in a clear and concise manner., 6. Strong problem-solving skills, with the ability to think strategically and creatively., 7. Excellent interpersonal skills, with the ability to build strong relationships with customers and team members., 8. Up-to-date knowledge of industry trends and developments., 9. Ability to work under pressure and meet tight deadlines., 10. Willingness to travel as required. If you are a motivated, solution-oriented professional with a passion for technology and a drive for success, we would love to hear from you. Apply today to join our dynamic team and help us deliver cutting-edge solutions to our customers. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Project Manager (DSA/K-12 Construction) Southern California This Jobot Job is hosted by: Katie Collins Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $180,000 per year A bit about us: For over a century, our company has been a leader in the construction industry, delivering large-scale, high-profile projects across the nation. With a reputation for excellence, innovation, and integrity, we specialize in commercial, institutional, and public infrastructure projects, including education, healthcare, aviation, and government facilities. Our team is committed to delivering high-quality construction solutions while maintaining strong partnerships with clients, architects, engineers, and subcontractors. We take pride in fostering a collaborative and inclusive workplace, investing in employee growth, cutting-edge technology, and sustainable building practices. Our company offers opportunities to work on some of the most impactful and complex projects in the industry, making a lasting difference in the communities we serve. Why join us? Job Perks & Benefits: • Competitive salary + potential performance-based bonuses., • 401(k) with company match., • Comprehensive health benefits (medical, dental, vision)., • Paid time off, holidays, and parental leave., • Professional development and career growth opportunities., • Company vehicle or travel reimbursement (for eligible roles). Job Details Position Overview: We are seeking a Project Manager to oversee DSA and K-12 construction projects from preconstruction to completion. This role involves managing budgets, schedules, subcontractors, and project teams to ensure successful, high-quality project delivery. The ideal candidate will have a strong background in public works and educational facility construction, a track record of delivering projects on time and within budget, and excellent leadership skills. Key Responsibilities: • Manage and coordinate all phases of DSA and K-12 construction projects, from planning to closeout., • Develop and track project budgets, schedules, and timelines to ensure timely completion., • Work closely with clients, architects, engineers, school districts, and subcontractors to facilitate smooth project execution., • Oversee contract negotiations, procurement, and vendor management to maintain efficiency and cost-effectiveness., • Ensure all projects meet DSA compliance, quality standards, safety regulations, and school district requirements., • Proactively identify and mitigate potential risks, delays, and cost overruns., • 5+ years of experience in commercial construction project management, specifically in K-12 and DSA-regulated projects., • Bachelor's degree in construction management, engineering, architecture, or a related field (preferred but not required)., • Strong knowledge of scheduling, budgeting, contract management, and project documentation., • Proficiency in construction management software (e.g., Procore, Bluebeam, Microsoft Project)., • Excellent problem-solving, leadership, and organizational skills. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

About Mindlance: Founded in 1999, Mindlance has been ranked as one of the fastest growing US Staffing firms by SIA for 9 consecutive years. We provide workforce solutions to Global 1000 companies in Technology, Engineering, Finance, Clinical Research, Scientific, Digital/Creative/Marketing space. Mindful of the opportunity gap, we provide balanced solutions for both employers and job seekers—elevating the standards of recruitment practice to a whole new level . Our aim is to make a difference in the lives of job seekers by providing them with opportunities that broaden career horizons and expand skill sets. We take pride in being a strong driver of mindfulness and balance at workplace. EEO: “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.”

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates. No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT. Senior Associate, Virtual Construction Job Description: HITT Contracting is seeking a creative, dynamic, and results-driven Senior Associate of Virtual Construction to lead construction process evolution and provide effective virtual construction services on HITT’s most complex projects. Responsibilities The Virtual Construction Senior Associate will sit either in HITT’s HQ or regional offices, working alongside a team of Virtual Construction professionals. Creating federated coordination models and leading BIM coordination with our subcontractor partners, design teams, and client. Taking accountability for ensuring timely conflict resolution and leading our partners through the process in an organized and professional manner. Performing reality capture services including but not limited to laser scanning (terrestrial and SLAM), drone and 360-degree ground image capture. Performing and maintaining 4D schedules, working closely with our on-site Operations and scheduling teams, and completing animations for site logistics and sequencing. Qualifications Bachelor’s degree in relevant field (Construction Management, Building Science, Engineering, Architecture) or equivalent experience. 3-6 years of practical experience in commercial construction, with at least 2 years of specific BIM/VDC process experience. Proficiency in understanding construction documents, shop drawings, and other design communication tools. Working knowledge of Revit, Navisworks, CM Builder, Synchro Pro, Adobe CC, Bluebeam, P6, and Microsoft Office. Laser scanning experience with either terrestrial or SLAM scanning is ideal. Demonstrated working knowledge of current BIM tools and VDC processes. Excellent written and verbal communication skills. Proven track record of successfully implementing virtual construction strategies on complex commercial projects. Passion for learning and adoption of new technology. HITT Contracting is an equal opportunity employer. We are committed to hiring and developing the most qualified individuals based on job-related experience, skills, and merit. All employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. We value a respectful, inclusive workplace where everyone has the opportunity to succeed. HITT Contracting maintains a drug-free workplace, consistent with applicable local, state, and federal laws.

What phase of construction are these Superintendents focusing on? Closeout & Post-Construction • Punch List Resolution: Systematically checking off final defects or unfinished work (punch list) to reach substantial completion., • Commissioning: Overseeing the testing and balancing of building systems (HVAC, plumbing, electrical) to ensure proper operation., • Final Inspections: Attending final inspections with building inspectors and fire marshals., • Final Documentation: Assembling and turning over as-built drawings, warranties, and O&M manuals., • Demobilization: Removing temporary facilities and cleaning up the site for handover. Job Description: A Superintendent directs the work flow of the project on site consistent with the project schedule and HITT safety and quality standards. The Superintendent provides leadership and serves as the liaison between project team members to promote the interest of both the business and clients in all matters, as well as demonstrate the characteristics of a mid-level leader. The Superintendent communicates project priorities to site staff and all subcontractors, serving as the primary leader on site for the construction project. Responsibilities • Understanding and administering the HITT safety program to include all subcontractors, ensuring that all accidents/incidents are promptly reported and investigated, and assisting in safety inspections by outside agencies, • Maintain HITT quality standards for all aspects of the project, • Serve as the leader for all on site safety, managing a safe jobsite for all involved, • Maintain daily log of all activities and site conditions, while managing the punch list and closeout process through owner/architect acceptance, • Work with the project manager in formulating project schedule, ensuring that the proper methods and sequence of installation are followed, making and following through with schedule commitments, and maintaining HITT quality standards, • Maintain good working relationships with all subcontractors on the project, developing relationships within the community which enhance business opportunities, and ensuring subcontractors are treated fairly, • Ensure complete, accurate daily documentation of work orders/tickets, understanding subcontractor scope of work to avoid unnecessary change orders, and identifying problems early and act immediately to provide solutions, • Develop and organize the site team, arranging for temporary facilities/utilities for the site, and identifying long lead items that need to be expedited, • A four-year degree from an accredited university with a concentration in construction, engineering, or business is strongly preferred., • In lieu of a degree, additional work experience is acceptable., • 5+ years’ experience in commercial construction, including experience with a commercial general contractor, • Tenant renovations, service work, work in occupied spaces, weekend work, fast paced project experience all a plus, • Mastery of building processes and best practices, • Ability to organize necessary resources, including people, tools and time to meet tight deadlines and achieve desired results, • Project lead experience preferred Previous experience in a superintendent or project lead experience preferred, • Ability to master sector/project-specific software systems including but not limited to: Microsoft Office suite (ex. Project, Excel, Word, Outlook, PowerPoint, etc.), ProCore, Adobe, BlueBeam,, • OSHA 30 Certification preferred, • Ability to walk and/or stand for long periods of time and the ability to lift up to 50lbs, • Must demonstrate a strong ability to:, • Communicate clearly, concisely, and professionally, with a strong focus on audience appropriate business writing and verbal skills, • Demonstrate a positive attitude and passion for construction and our industry, • Gather data, interpret it into meaningful information, and relay that information through clear, concise communication strategies; ability to see how pieces and processes fit into and affect the bigger picture/business model, • Organize and manage tasks and priorities, • Demonstrate integrity consistently with The HITT Way and HITT’s core values, • Seek continuous improvement of knowledge and abilities, internal focus on self-improvement, • Adapt and exercise flexibility with the ever-changing world of technology, design, means and methods, • Collaborate with people of various backgrounds and styles, • Create and maintain relationships with colleagues, clients, subcontractors, and vendors, • Exhibit respectfulness by being punctual, engaged/focused, and respectful of others

Job Description Safari Solutions has an immediate need for a full time 5G Network Manager to join our growing Events Team. Safari Solutions delivers private wireless solutions at a wide array of sports and entertainment landscapes. The 5G Network Manager will travel nationwide to events for setup and support and must be willing to travel up to 65% of the year, typically 180+days per year. Responsibilities: Planning: • Understanding of site design and installation plan, • Project timelines, maps, site integration, predictive surveys, use cases, • Attend all pre-event planning calls. Onsite Deployment: • Install gap fiber cabling to 5G nodes, • Verify labeling, functionality, and test all Core RAN and Remote Sectors, • Deploy and test remote sectors and connect back to core, • Strategically place nodes in accordance to site design angling and adjusting azimuths, • Verify connectivity and roaming performance, • Ongoing collaboration with NOC and Remote Engineering, • Continuously test performance during the event and collaborate with NOC on identified issues., • Gather end-user feedback and experiences., • Investigate and troubleshoot connectivity issues in real-time, conducting walkarounds during the event., • Ensure the highest deployment standards are met., • Tear down post event and pack assets for next tour stop Qualifications: • Complete all trainings outlined by 5G Internal Safari Team., • Familiarity with Nokia and Ericsson Hardware., • Exposure to wireless standards, RF fundamentals and RAN Technology, • Advanced troubleshooting skills, • CPI/Nokia/Ericsson Certifications Preferred Physical Requirements and Work Conditions: • Ability to carry 30 lbs. of material, and use a man lift or ladder during the course of a normal work day, • Ability to work in heat and cold temperatures, • Work with flexibility in scheduling to meet productions goals, • This job requires up to double shifts during Events.

Job DescriptionLightedge is seeking an experienced CloudFinOps Specialist to join our Cloud Center of Excellence (CCoE) team. At Lightedge, FinOps is deeply integrated into our CCoE and infrastructure operations to drive cost transparency, operational efficiency, and platform reliability across our managed environments. Our team is a collaborative mix of engineers, infrastructure specialists, and data-focused practitioners who partner closely with other engineering, operations, and finance teams. In this role, you will leverage your expertise in FinOps, cloud cost optimization, billing structures, and analytics to assess cost and usage across customer environments, identify optimization opportunities, and implement solutions that improve performance, scalability, and financial accountability. You will play a key role in ensuring Lightedge’s platforms and customer-facing services are cost-effective, reliable, and resilient, while helping bridge financial insight with technical execution. If you are passionate about aligning infrastructure economics with engineering outcomes, this role offers an opportunity to make a meaningful impact in a growing, customer-focused organization.Responsibilities • Analyze and optimize AWS and Azure cloud, infrastructure, and platform costs using FinOps best practices, including forecasting, budgeting, and rightsizing to reduce waste while maintaining performance and availability., • Develop and maintain reporting pipelines, dashboards, and automation for cost monitoring, allocation, and optimization across cloud and hybrid infrastructure environments., • Perform advanced analysis on usage, performance, and cost trends to deliver actionable insights and recommendations to customers as well as internal engineering, operations, and finance teams., • Partner with AWS/Azure engineers to design, implement, and refine solutions that improve cost efficiency, scalability, and system reliability., • Stay current on FinOps frameworks, cloud economics, infrastructure tooling, and industry best practices to continuously improve Lightedge’s cost management strategy.Education and Experience, • Bachelor's degree in Computer Science, Information Technology, Finance, or a related field, or equivalent professional experience., • 2+ years of experience in a FinOps, cloud cost optimization, SRE, or infrastructure-focused role., • Strong understanding of cloud cost and billing data on AWS and Azure, including detailed usage and cost reporting., • Demonstrated analytics experience, including building dashboards and querying large datasets to derive operational and financial insights., • Experience working in hybrid environments, including cloud, colocation, and managed infrastructure (preferred)., • Strong problem-solving skills with a data-driven approach and the ability to balance cost optimization with performance, reliability, and customer commitments.

Job DescriptionIT Project ManagerEmployment Type: Full-Time, ExperiencedDepartment: Information Technology CGS is looking for an IT Project Manager to assist with the design, development, and oversight of various ongoing efforts in the IT department of a large federal entity. The PM will participate in project design, assist with the development of project plans, assess available resources, and implement the management plans for new and ongoing projects. The candidate for this position should have a strong understanding of Agile project management principles for both large and small projects as well as be experienced and comfortable with acting as team lead or primary liaison for project information. CGS brings motivated, highly skilled, and creative people together to solve government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:-Define project scope and schedule while focusing on regular and timely delivery of value.-Organize and lead project status and working meetings.-Prepare and distribute progress reports.-Manage risks and issues; correct deviations from plans and perform delivery planning for assigned projects.-Define and develop initiatives for continuous business process improvements and monitoring.-Manage the team in making business decisions relating to system implementation, modification and maintenance.-Develop and update business process documentation for testing and training management.-Define and manage a well-defined project management process and champion ongoing process improvement initiatives to implement best practices for agile project management.-Deliver an agile transformation plan to move from current state to a desired state.-Use standard project performance metrics to assess and evaluate the program.-Aid in the implementation and facilitation of the use of agile tools, guidelines and metrics in order to achieve a standardized approach to agile team project execution.-Monitor the overall cost, control, adherence to schedules, and technical quality of work.-Prepare and provide technical analysis reports as directed by the Agency to support discussions. Qualifications:-Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.-5 years of experience in project management.-At least 5 years of experience in managing IT related projects and must demonstrate a leadership role in at least 3 successful projects that were delivered on time and on budget.-At least 5 years of experience in information system design and development experience in one or more general purpose programming language development such as JavaScript and Java.-Knowledge in system integration using Application Program Interface (API) management technologies, and a working knowledge of the RESTful APIs platform, API design, and development on the cloud as well as on-premise environments.-Experience in RDBMS and NoSQL database development experience with strong fundamentals in algorithm design, problem-solving, and complexity analysis.-At least 5 years of experience in managing an Agile scrum team with developers, testers and DevOps team using Agile processes and practices.-Experience working with public agency interfaces.-A Master’s Degree or project management certification.-At least 5 years of programming experience in Java, JavaScript, JBOSS Fuse, Angular JS. -Experience in health and human services domains such as eligibility, enrollment, Medicaid, child welfare, and child support systems.-Experience building complex software systems with one or more general-purpose programming languages.-Knowledge of best practices for the full Agile SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations.-Integration experience with financial management systems.-Experience working with two or more from the following: web application development, mobile application development, information retrieval, developing large software systems, and/or security software development. -Industry certifications/licenses. Ideally, you will also have:-Client-facing communication experience.-Federal Agency issued security clearance. Our commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our clients’ specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years we’ve been growing our government-contracting portfolio, and along the way we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.-Health, Dental, and Vision-Life Insurance-401k-Flexible Spending Account (Health, Dependent Care, and Commuter)-Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of meaningful government innovation!Explore additional job opportunities with CGS on our Job Board: For more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.