Technology engineering jobs in Fort Worth, TexasCreate job alerts

Interested in a career with both meaning and growth? Whether your abilities are in direct patient care or one of the many other areas of healthcare administration and support, everyone at Parkland works together to fulfill our mission: the health and well-being of individuals and communities entrusted to our care. By joining Parkland, you become part of a diverse healthcare legacy that’s served our community for more than 125 years. Put your skills to work with us, seek opportunities to learn and join a talented team where patient care is more than a job. It’s our passion. Supervises, organizes and coordinates the clinical and technical aspects of services rendered to ensure the delivery of timely and quality services. Education: Must be a graduate of an accredited imaging program for any of the following primary pathways: • Radiography, • Magnetic Resonance Imaging, • Nuclear Medicine Technology, • Sonography Experience: -Must have four (4) years of progressive responsibility in Radiology operations, including knowledge of procedures, workflow within assigned Radiology area, quality monitoring, and general operational troubleshooting. -Previous supervisory or leadership experience preferred. Certification/Registration/Licensure If hired in Mammography- 70550 & 89000 (MA): • Must have American Registry of Radiologic Technologist (ARRT) (M) certification as a Mammography Technologist, • Must have a Medical Radiologic Technologist (MRT) certification from Texas Department of State Health Services (TDSHS) or Texas Medical Board CPR Certification In any department, all positions must have a current Healthcare Provider (BLS Level) CPR course completion card or obtain certification during initial orientation at Parkland from one of the following: • American Heart Association, • American Red Cross Rescuer, • Military Training Network. Skills or Special Abilities -Must successfully understand Radiology Operations, demonstrated by understanding workflow, requirements, and staff logistics. -Must have time management skills with demonstrated ability to successfully handle multiple projects and assignments. -Must be able to demonstrate good phone etiquette, interpersonal and verbal/written communication skills. -Must be able to assess and or determine process flow requirements that will lead to improved patient flow/staffing. -Must be able to demonstrates independent judgement, critical thinking, and problem-solving skills when appropriate. Responsibilities 1. Functions as a leader/expert in appropriate modality or multiple modalities. Assists in the selection, training, and supervision for assigned staff to ensure maximum utilization of individual and group capabilities, while providing optimal service to internal and external customers. Responsible for operational practices that deliver effective and efficient services and ensure optimal patient outcomes. Collaborates with medical staff and administration to assess operations and evaluate quality. Identifies and analyzes work processes implementing appropriate changes to improve effectiveness, productivity and efficiency and patient access., 2. Upholds policies and procedures, conducts appraisals and progressive discipline reports. Responds to patient safety posts and investigations within established department expectations. Responds to inquiries, calls, emails in a timely and professional manner. Communicates shift hand off regarding workflow issues with equipment or pending exams with oncoming staff. Engages in equitable distribution of departmental workloads. Communicates changes and provides operational guidance to staff as needed., 3. Responsible for effective fiscal management of assigned areas in the Radiology-Clinical Support division, ensuring appropriate use of department resources. Utilizes benchmarks for staffing levels. Demonstrates ability to flex resources to changing volume and acuity requirements., 4. Identifies achievable initiatives to improve work processes and improve customer (internal as well as external) satisfaction. Responsible for monitoring satisfaction results as appropriate to ensure the support of the overall goals of radiology and the mission of Parkland. Assists in meeting or exceeding annual patient satisfaction goals established by radiology leadership and Parkland., 5. Monitors and ensures QC/QA compliance with all relevant laws, state and federal regulations, licensing and accreditation requirements, hospital and departmental standards for safety, infection control and equipment performance. Provides timely access to equipment, supplies, and logistical support to the Information Technology, Bio Medical, Clinical Engineering and Medical Physicists departments. Facilitates/follow-up with repairs and maintenance as needed on equipment and supplies. Troubleshoots system and equipment issues as needed., 6. Provide patient care as a Technologist when appropriate; responsibilities include, but are not limited to, performing basic and/or complex procedures on assigned patients to ensure that scanning needs are met. Review physician orders and applicability to the imaging protocol. Screen patients for safety and review any contraindications for exams which would prohibit or modify the exam. If modification of an imaging protocol is necessary consult with radiologist to determine appropriate sequences, parameters, etc. Document changes as appropriate in electronic health record. Ensure other resources have been scheduled accordingly. Interviews patient (two patient identifier) conducts patient screening and obtains medical history pertaining to procedure’s clinical criteria. Explains procedure and instructs patient on necessary requirements needed to provide diagnostic images. Answers questions/screening concerning procedures, medications, etc. for relevant exams. Assists the physician as needed in performing procedures. Ensures that images and records are properly completed with patient identification data and appropriate labeling. Utilizes technical knowledge and skills to perform procedures accurately and in a timely manner in accordance with age specific criteria. Completes exam charges and image documentation in a timely manner. Administers contrast material/medication in the correct dosage, route and observes patients for adverse reactions, within the scope of licensure. Engages in equitable distribution of departmental workloads. Coordinates continuity of patient care to the varying locations. Provides escalation and add on assistance with scheduling modality exams. Available for assistance during scheduled downtime procedures., 7. Assists with the implementation of new programs related to modality (software, research, educational). Provide quotes from vendors for operational and/or capital budgets. Identifies supply needs, monitors expiration dates of all supplies and takes appropriate action., 8. Participates in departmental Performance Improvement Programs, radiology user groups such as Radiology User Group (RUG), understands “ICARE” and its relationship to the work environment, attends department and modality meetings satisfactorily. Functions in the department as part of an interdisciplinary team and collaborates in the care and service delivery process of patient care through effective communication with other service lines. Demonstrates conscious effort to be good stewards of hospital resources to ensure Parkland financial goals are met. Job Accountabilities Identifies ways to improve work processes and improve customer satisfaction. Makes recommendations to supervisor, implements, and monitors results as appropriate in support of the overall goals of the department and Parkland. Stays abreast of the latest developments, advancements, and trends in the field by attending seminars/workshops, reading professional journals, actively participating in professional organizations, and/or maintaining certification or licensure. Integrates knowledge gained into current work practices. Maintains knowledge of applicable rules, regulations, policies, laws and guidelines that impact the area. Develops effective internal controls designed to promote adherence with applicable laws, accreditation agency requirements, and federal, state, and private health plans. Seeks advice and guidance as needed to ensure proper understanding. #LI-SS2 Parkland Health and Hospital System prohibits discrimination based on age (40 or over), race, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, genetic information, disability, national origin, marital status, political belief, or veteran status. As part of our commitment to our patients and employees’ wellness, Parkland Health is a tobacco and smoke-free campus.

Lead Platform Engineer (Citrix) Do you love building and pioneering in the technology space? Do you enjoy solving complex technical problems in a fast-paced, collaborative, inclusive, and iterative delivery environment? At Capital One, you'll be part of a big group of makers, breakers, doers and disruptors, who love to solve real problems and meet real customer needs. We are seeking Platform Engineers who are passionate about creating and supporting DevOps tools with emerging technologies to join our team. As a Platform Engineer, you’ll have the opportunity to be on the forefront of driving a major transformation within Capital One. General Responsibilities: * Work with product owners to understand desired application capabilities and testing scenarios * Continuously improve software engineering practices * Work within and across Agile teams to design, develop, test, implement and support technical solutions across a full-stack of development tools and technologies * Lead the craftsmanship, availability, resilience and scalability of your solutions * Bring a passion to stay on top of tech trends, experiment with and learn new technologies, participate in internal & external technology communities, and mentor other members of the engineering community * Encourage innovation, implementation of cutting-edge technologies, inclusion, outside-of-the-box thinking, teamwork, self-organization and diversity * Utilize scripting languages like Python, SQL, Ruby and groovy, Container Orchestration services including Docker and ECS, CM tools including Ansible and Terraform, and a variety of AWS tools and services Basic Qualifications: * High School Diploma, GED, or equivalent certification * At least 6 years of experience using build and deployment tools (Jenkins, GitHub, or Artifactory) * At least 4 years of experience with AWS * At least 2 years of team leadership experience Preferred Qualifications: * 5+ years of experience with AWS * 2+ years of experience in Agile practices * 4+ years of experience with Citrix environments or Virtual Desktop platforms At this time, Capital One will not sponsor a new applicant for employment authorization, or offer any immigration related support for this position (i.e. H1B, F-1 OPT, F-1 STEM OPT, F-1 CPT, J-1, TN, E-2, E-3, L-1 and O-1, or any EADs or other forms of work authorization that require immigration support from an employer). The minimum and maximum full-time annual salaries for this role are listed below, by location. Please note that this salary information is solely for candidates hired to perform work within one of these locations, and refers to the amount Capital One is willing to pay at the time of this posting. Salaries for part-time roles will be prorated based upon the agreed upon number of hours to be regularly worked. McLean, VA: $158,400 - $180,800 for Lead Platform Engineer Plano, TX: $144,000 - $164,400 for Lead Platform Engineer Richmond, VA: $144,000 - $164,400 for Lead Platform Engineer Candidates hired to work in other locations will be subject to the pay range associated with that location, and the actual annualized salary amount offered to any candidate at the time of hire will be reflected solely in the candidate’s offer letter. This role is also eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). Incentives could be discretionary or non discretionary depending on the plan. Capital One offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. Learn more at the ___. Eligibility varies based on full or part-time status, exempt or non-exempt status, and management level. This role is expected to accept applications for a minimum of 5 business days. No agencies please. Capital One is an equal opportunity employer (EOE, including disability/vet) committed to non-discrimination in compliance with applicable federal, state, and local laws. Capital One promotes a drug-free workplace. Capital One will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries, including, to the extent applicable, Article 23-A of the New York Correction Law; San Francisco, California Police Code Article 49, Sections 4901-4920; New York City’s Fair Chance Act; Philadelphia’s Fair Criminal Records Screening Act; and other applicable federal, state, and local laws and regulations regarding criminal background inquiries. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation, please contact Capital One Recruiting at 1-800-304-9102 or via email at ___. All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodations. For technical support or questions about Capital One's recruiting process, please send an email to ___ For technical support or questions about Capital One's recruiting process, please send an email to Capital One does not provide, endorse nor guarantee and is not liable for third-party products, services, educational tools or other information available through this site. Capital One Financial is made up of several different entities. Please note that any position posted in Canada is for Capital One Canada, any position posted in the United Kingdom is for Capital One Europe and any position posted in the Philippines is for Capital One Philippines Service Corp. (COPSSC).

Senior Data Engineer (Python, SQL, AWS) Do you love building and pioneering in the technology space? Do you enjoy solving complex business problems in a fast-paced, collaborative,___inclusive, and iterative delivery environment? At Capital One, you'll be part of a big group of makers, breakers, doers and disruptors, who solve real problems and meet real customer needs. We are seeking Data Engineers who are passionate about marrying data with emerging technologies. As a Capital One Data Engineer, you’ll have the opportunity to be on the forefront of driving a major transformation within Capital One. What You’ll Do: * Collaborate with and across Agile teams to design, develop, test, implement, and support technical solutions in full-stack development tools and technologies * Work with a team of developers with deep experience in machine learning, distributed microservices, and full stack systems * Utilize programming languages like Java, Scala, Python and Open Source RDBMS and NoSQL databases and Cloud based data warehousing services such as Redshift and Snowflake * Share your passion for staying on top of tech trends, experimenting with and learning new technologies, participating in internal & external technology communities, and mentoring other members of the engineering community * Collaborate with digital product managers, and deliver robust cloud-based solutions that drive powerful experiences to help millions of Americans achieve financial empowerment * Perform unit tests and conduct reviews with other team members to make sure your code is rigorously designed, elegantly coded, and effectively tuned for performance Basic Qualifications: * Bachelor’s Degree * At least 3 years of experience in application development (Internship experience does not apply) * At least 1 year of experience in big data technologies Preferred Qualifications: * 5+ years of experience in application development including Python, SQL, Scala, or Java * 2+ years of experience with a public cloud (AWS, Microsoft Azure, Google Cloud) * 3+ years experience with Distributed data/computing tools (MapReduce, Hadoop, Hive, EMR, Kafka, Spark, Gurobi, or MySQL) * 2+ year experience working on real-time data and streaming applications * 2+ years of experience with NoSQL implementation (Mongo, Cassandra) * 2+ years of data warehousing experience (Redshift or Snowflake) * 3+ years of experience with UNIX/Linux including basic commands and shell scripting * 2+ years of experience with Agile engineering practices At this time, Capital One will not sponsor a new applicant for employment authorization, or offer any immigration related support for this position (i.e. H1B, F-1 OPT, F-1 STEM OPT, F-1 CPT, J-1, TN, or another type of work authorization). The minimum and maximum full-time annual salaries for this role are listed below, by location. Please note that this salary information is solely for candidates hired to perform work within one of these locations, and refers to the amount Capital One is willing to pay at the time of this posting. Salaries for part-time roles will be prorated based upon the agreed upon number of hours to be regularly worked. McLean, VA: $158,600 - $181,000 for Senior Data Engineer Plano, TX: $144,200 - $164,600 for Senior Data Engineer Richmond, VA: $144,200 - $164,600 for Senior Data Engineer Candidates hired to work in other locations will be subject to the pay range associated with that location, and the actual annualized salary amount offered to any candidate at the time of hire will be reflected solely in the candidate’s offer letter. This role is also eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). Incentives could be discretionary or non discretionary depending on the plan. Capital One offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. Learn more at the ___. Eligibility varies based on full or part-time status, exempt or non-exempt status, and management level. This role is expected to accept applications for a minimum of 5 business days. No agencies please. Capital One is an equal opportunity employer (EOE, including disability/vet) committed to non-discrimination in compliance with applicable federal, state, and local laws. Capital One promotes a drug-free workplace. Capital One will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries, including, to the extent applicable, Article 23-A of the New York Correction Law; San Francisco, California Police Code Article 49, Sections 4901-4920; New York City’s Fair Chance Act; Philadelphia’s Fair Criminal Records Screening Act; and other applicable federal, state, and local laws and regulations regarding criminal background inquiries. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation, please contact Capital One Recruiting at 1-800-304-9102 or via email at ___. All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodations. For technical support or questions about Capital One's recruiting process, please send an email to ___ For technical support or questions about Capital One's recruiting process, please send an email to Capital One does not provide, endorse nor guarantee and is not liable for third-party products, services, educational tools or other information available through this site. Capital One Financial is made up of several different entities. Please note that any position posted in Canada is for Capital One Canada, any position posted in the United Kingdom is for Capital One Europe and any position posted in the Philippines is for Capital One Philippines Service Corp. (COPSSC).

COMPANY OVERVIEW As the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together. TOTAL REWARDS Constellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more. This role will be considered for the O&M Tech level II and III. Leveling will be based on candidates past work experience. Hourly Rate Starts at $35.22 - $56.96, depending on level of experience. Shift is 2pm - 10pm. Power Plant Electrician - Operations and Maintenance Technician PRIMARY PURPOSE OF POSITION The primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical, I/C, and electrical high voltage equipment with as required to support plant operations and maximize asset value. PRIMARY DUTIES AND ACCOUNTABILITIES • Uses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly)., • Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment., • Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship., • Leads equipment or system problem identification and recommends solutions., • Perform predictive/preventive maintenance., • Perform electrical maintenance on generators, transformers and MOV&rsquos., • Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments., • Develops operating procedures for plant equipment to ensure consistent and safe operation., • Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process., • Assists in requisitioning parts and supplies., • Perform any other duties as assigned. POSITION SCOPE The incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems. Qualifications - External MINIMUM QUALIFICATIONS • Associates' Degree in Power Plant Technology, Engineering Technology, or Electronics OR, • HS Diploma with minimum of 18 months of trade or technical training in Power Plant Technology, • Successfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH test, • Electrical background, • Availability for Day shift work and overtime as required, • Good oral and written communication skills, • Basic computer skills, • Understanding of power plant prints, • Valid driver's license and access to an insured vehicle, • Ability to work in a power plant environment that includes climbing and walking long distances, • Ability to lift a minimum of 50 pounds

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Operations Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that are able to achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: • Compensation: Competitive Compensation, • Generous benefits package including medical, dental, vision, disability, life insurance and 401(k), • Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets., • Assures the compliance of behavior-based safety initiatives and continuously improves safety performance., • Executes quality control plans for compliance to standards and drives variation reduction within the process., • Assesses on-time delivery performance and develops actions to improve and sustain high level of performance., • Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures., • Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling., • Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies., • Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements., • Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions., • Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable., • Promotes, prepares, and participates in kaizen activities. Sustains results., • Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools., • In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels., • Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines., • Coaches and mentors team members to assure their ongoing development, • Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases., • A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations., • Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience., • Minimum of 7 years' experience in Operations and/or Lean Management., • Printing industry experience is preferred., • Experience in being a change agent in complex transformational activities., • Significant experience in implementation of Lean principals as they apply to manufacturing operations., • Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures., • Excellent communication skills, • Advanced excel skills #FTWIND For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world’s most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ___. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ___. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Job Description Senior Construction Project Manager Job description Position Overview: The Senior Project Manager plans, directs, and coordinates activities of designated projects to ensure that goals or objectives of project are accomplished within prescribed time frames. This position will ensure that multiple projects will be completed simultaneously in various locations by multiple teams of Project Managers, Superintendents, and Project Engineers. Responsibilities: • Plan for large-scale, multi-step projects., • Select through a bidding process; subcontractors and materials in alignment with the owners, • Communicate efficiently with subcontractors, owners, and team members actions that need to be taken, expectations, and follow-up, • Must know construction methodologies, read blueprints and understand other technical aspects of construction., • Time-Management: Deadlines are crucial in construction. Making sure that everything is on time and moving smoothly is a critical part of the job., • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Establishes work plan and schedule and coordinates completion of the project through the subcontractors, and project superintendent, • Responsible for maintaining project budget, • Approves all project billings, manages change orders with client and subcontractors and approves all project costs, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with estimating and accounting personnel to provide technical advice and to resolve problems, • B.S or B.A in Construction Science, Engineering, Architecture, or related field, • Minimum five years of experience in building commercial construction as a Project Manager, • Experience in completing project in joint venture work preferred, • Experience/ability to direct/manage projects exceeding $15M, • Strong computer skills including, but not limited to, word processing, spreadsheets, estimating, and project management program Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off daily temperature checks, optional masks are available Ability to commute/relocate: • Bachelor's (Required) Company DescriptionWe are a boutique style professional company in commercial construction, program management, commercial real estate and technology. We specialize in large-scale projects with a small-scale team. Located in Arlington, Tx, we value independent, innovative personalities who are wanting the responsibility of running their own project. We are an African American owned business, which values individuals of all backgrounds, who believe that discrimination is not a hurtle but a reason to perform at a top level to competitive level. If you also believe in these values and enjoy construction, please apply.We are a boutique style professional company in commercial construction, program management, commercial real estate and technology. We specialize in large-scale projects with a small-scale team. Located in Arlington, Tx, we value independent, innovative personalities who are wanting the responsibility of running their own project. We are an African American owned business, which values individuals of all backgrounds, who believe that discrimination is not a hurtle but a reason to perform at a top level to competitive level. If you also believe in these values and enjoy construction, please apply.

Job Description Sr. Program Manager Arlington. Tx Job Type: Full-Time About Salcomp Salcomp is a global leader in the manufacturing of chargers and power adapters for consumer electronics, with a strong focus on sustainable and innovative solutions. As a key supplier to major brands in the smartphone, gaming, IoT, and wearable industries, we are at the forefront of technology and precision engineering. Join us to power the world’s most popular devices and drive complex, large-scale programs from concept to delivery. Job Summary We are seeking a highly experienced and certified Senior Program Manager to lead strategic, cross-functional programs within our global manufacturing operations. The ideal candidate will be a proactive leader with a proven track record of managing the entire project lifecycle for complex, high-volume manufacturing projects. This role requires exceptional organizational skills, strategic thinking, and the ability to drive teams to achieve on-time, on-budget, and on-quality results. A current Project Management Professional (PMP) certification from the Project Management Institute (PMI) is mandatory for this role. Key Responsibilities * Program Leadership: Lead multiple, simultaneous large-scale programs from initiation through closure, ensuring alignment with Salcomp’s strategic objectives and customer requirements. * Stakeholder Management: Serve as the primary point of contact for internal and external stakeholders, including executive leadership, engineering, supply chain, quality, sales, and key customers. Manage communication and expectations effectively. * PMP-Based Methodology: Apply standardized project management methodologies (initiating, planning, executing, monitoring/controlling, closing) as defined by the PMI PMBOK Guide to ensure rigorous and consistent program execution. * Scope, Schedule, & Budget Management: Develop and maintain detailed program plans, schedules, budgets, and resource plans. Proactively identify and mitigate risks, manage changes, and ensure timely delivery within approved financial constraints. * Cross-Functional Coordination: Lead and motivate cross-functional teams (Engineering, Production, PMC,Manufacturing, Quality) located globally to achieve program milestones and deliverables. * Risk and Issue Management: Identify, assess, and develop mitigation strategies for program risks and issues. Elevate critical concerns to management with recommended solutions in a timely manner. * Quality & Delivery Assurance: Ensure all program deliverables meet Salcomp’s high-quality standards and customer specifications. Manage the New Product Introduction (NPI) process within a manufacturing environment. * Reporting & Communication: Provide regular, clear, and concise program status reports to all stakeholders, highlighting progress, risks, budget status, and key metrics. Qualifications & Experience Mandatory: * Bachelor’s degree in Engineering, Business Administration, or a related field. * Current and active PMP (Project Management Professional) certification. * 5+ years of progressive experience in program/project management, with at least 2years in a senior role managing complex projects. * Proven experience within a high-volume manufacturing environment, preferably in consumer electronics, telecommunications, or automotive. * Demonstrable experience with full product life cycle management (PLM) and New Product Introduction (NPI) processes. Preferred: * Master’s degree (e.g., MBA) is a plus. * Experience working with global teams and international customers. * Knowledge of Lean Manufacturing and Six Sigma principles (Green Belt/Black Belt a plus). * Proficiency with project management software (e.g., MS Project, Jira, Smartsheet) and ERP systems.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Project Manager to join our Community Design Group to improve infrastructure in our Fort Worth office. Candidates must have a bachelor's degree in civil or environmental engineering, a minimum of ten years of experience in project management and a Professional Engineer license. Candidates must be self-motivated and able to work well with others. Typical responsibilities include:• Operational: • Responsible for financial performance of a division (office or practice area) of designated market segment, • Track monthly workload to coordinate staffing needs with the Market Segment Lead (MSL) and recommend staff changes as needed, • Mentor project managers, • Take on project manager assignments, • Review and approve all contracts and seek input from MSL as appropriate, • Accountable for project teams, • Effectively coordinate division (office or practice) activities with the MSL, • Accountable for Project Manager/Client Manager performance, • Accountable for pricing, • Responsible for client profitability, • Assist the Project Manager in A/R and invoicing, • Approve training/seminars and memberships with annual budget and coordinate with other Practice Leads/Senior Project Managers within the market segment, • Responsible for Utilization and Projects in Trouble, • Approve time sheets, • Accountable for consistent technical project approach across market segment • Sales/Business Development:, • Responsible for client satisfaction, • Review all proposal scope, pricing and other content, • Solicit input on major pursuits from MSL, • Responsible for division Sales, • Responsible for sales efforts, proposal preparation and presentations and budgets, • Solicit input from Practice Leads on specialty products, • Coordinate client entertainment activities, • Responsible for new client contact development, • Review RFPs and assign to the appropriate Project Manager, • Create the best project teams, • Responsible for division growth initiatives• Corporate:, • Identify and recommend training, seminars and conferences to MSL, • Support the MSL in developing Business Plan goals, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering requiredSkills/Experience:, • 10+ years of related experience required

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: This position requires strong technical, managerial, and financial skills and leadership ability. This position requires an individual to be goal oriented, take charge of individual initiatives, understand client needs, and meet schedules. This position requires occasional periods of intense concentration, as well as average strength and stamina. This position is within a normal office environment with little exposure to noise, dust, fumes, etc., and requires extensive travel. The following roles and responsibilities have been broken out into the three categories, Technology/Innovation, Operations, and Business Development. These three areas of our business are aligned with corporate officer positions served by the CTO, COO and CBDO underneath the overall leadership of the CEO. These areas of business also align with various avenues for career development in achieving leadership positions within the company including those of Technology Leads that aspire to become Practice Leads. Typical responsibilities include: • Technology/Innovation, • Seek out emerging and potentially disruptive innovative systems, methods and technology that will keep Wade Trim at the forefront of innovation and continuous improvement to provide the best solutions for our clients., • Participate as a member in the Office of Applied Technology by identifying and reviewing proposed specific investments in advanced technology and innovation to keep our company technically competitive compared to the competition., • Provide overall technical leadership, vision, and guidance to their practice area., • Provide input to other Practice Leads to ensure best management practices are consistently applied to achieve our technology advancement goals., • Identify and appoint Technology Leads to advance the practice within the areas of their specific expertise and measure their performance through annual PDPs and goal setting., • Develop “talent tree” for their practice area on an annual basis to assess depth of talent and bench strength to support MSLs in hiring technology-based hires., • Mentor/coach selected staff in area of expertise., • Assist market segment in identifying skill inventory in practice of their expertise., • Review technical paper requests, abstracts and papers., • Business Development, • Support CBDO and CTO in development of strategic growth plans based on technology advancement., • Work with the Market Segment Lead to drive growth by leveraging existing relationships while developing new relationships necessary to achieve sales goal., • Develop and implement plans to apply innovation to the practice and our clients by engaging in internal and external activities necessary to deploy such innovations, such as preparing and hosting brown bag seminars for in-house client service management staff, general staff, and targeted clients., • Provide input for strategy and messaging for proposal development, ensuring qualifications are optimized and technical approaches are clear, compliant, and focused to increase our chances of success., • Participate in and/or provide technical input on client sales calls and presentations., • Advance our branding strategy as thought leaders of our industry by participating in associations within their practice area and volunteering for leadership positions. This also includes participating in technology focus groups, writing for technical publications and make presentations at conferences. Encourage and support other members of their practice to do the same., • Operations, • Provide technical input on projects and initiatives., • Work closely with MSLs to develop hiring strategies for improving the depth and skills of our talent trees. Lead search for strategic technology-based hires., • Lead an annual staff assessment and report to the Market Segment Lead to identify technical, training and project management needs within the market segment and the Practice. Drive the staff improvement process through the Market Segment Leads., • Actively support the Standards Committee by developing and maintaining design protocols originating from their practice to enhance and standardize project delivery consistency. This includes leading the development of Design Guidelines not only for the Practice within Wade Trim but also for client specific Design Guidelines., • Work with the Market Segment Lead, Project Directors and Quality Manager to assist in providing QA/QC support by ensuring appropriate skilled staff are reviewing projects and assigned initiatives., • Research and provide regulatory updates to practices covered by their technology., • Provide cross training for skills developed under their practice., • Oversee and manage the business planning process and execution of market segment and Practice participation in technical training and conferences, including setting attendance criteria, defining learning or client engagement goals, ensuring post-event knowledge sharing, and tracking outcomes to assess value and attendee effectiveness., • Support and promote our DEI initiatives., • Maintain a safe working environment.Education:, • Bachelor’s Degree in area of practice requiredSkills/Experience:, • Professional Engineering License required, • 15 years of experience in the Power Industry required

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Project Manager to join our Water Team to improve infrastructure in our Dallas/Fort Worth office. Candidates should have a bachelor's degree in civil or environmental engineering, fifteen or more years of water resources design and project management experience and a PE license. Experience using Microsoft Office and design software and excellent verbal and written communication skills is also required. A flexible hybrid-remote work schedule available after 90 days of employment. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide project management, technical planning, design and construction support on various stormwater, water and wastewater treatment and collection system projects, • Become the client manager for targeted key clients, • Actively participate in improving Wade Trim"s visibility and brand, • Prepare engineering calculations and supporting analysis of alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Monitor task budget and progress, • Prepare project status and other reports, • Communicate project details with other design engineers, • Conduct project cost reviews, • Promote sales, • Prepare and review scope, budget and schedule for project tasks, • Assist with proposals, marketing, project reports and technical presentations, • Conduct on-site inspections as needed, • Attend and/or conduct client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering required, • Master's Degree in Civil or Environmental Engineering preferredSkills/Experience:, • 15+ years of related experience required, • Licensed Professional Engineer required, • Preferred experience in Pump Station Design, Pipeline Design, or Water/Wastewater Treatment

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Project Manager to join our Community Design Group to improve infrastructure in our Fort Worth office. Candidates must have a bachelor's degree in civil or environmental engineering, a minimum of ten years of experience in project management and a Professional Engineer license. Candidates must be self-motivated and able to work well with others. Typical responsibilities include:• Operational: • Responsible for financial performance of a division (office or practice area) of designated market segment, • Track monthly workload to coordinate staffing needs with the Market Segment Lead (MSL) and recommend staff changes as needed, • Mentor project managers, • Take on project manager assignments, • Review and approve all contracts and seek input from MSL as appropriate, • Accountable for project teams, • Effectively coordinate division (office or practice) activities with the MSL, • Accountable for Project Manager/Client Manager performance, • Accountable for pricing, • Responsible for client profitability, • Assist the Project Manager in A/R and invoicing, • Approve training/seminars and memberships with annual budget and coordinate with other Practice Leads/Senior Project Managers within the market segment, • Responsible for Utilization and Projects in Trouble, • Approve time sheets, • Accountable for consistent technical project approach across market segment• Sales/Business Development:, • Responsible for client satisfaction, • Review all proposal scope, pricing and other content, • Solicit input on major pursuits from MSL, • Responsible for division Sales, • Responsible for sales efforts, proposal preparation and presentations and budgets, • Solicit input from Practice Leads on specialty products, • Coordinate client entertainment activities, • Responsible for new client contact development, • Review RFPs and assign to the appropriate Project Manager, • Create the best project teams, • Responsible for division growth initiatives• Corporate:, • Identify and recommend training, seminars and conferences to MSL, • Support the MSL in developing Business Plan goals, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering requiredSkills/Experience:, • 10+ years of related experience required

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Treatment Project Manager to join our Water Team to improve infrastructure with our Dallas/Fort Worth staff. Candidates should have a bachelor’s degree in civil or environmental engineering, fifteen or more years of water treatment and project management experience and a PE license. Excellent technical writing, organization and communication skills are essential. Candidates must be self-motivated and able to work well with others. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide senior technical planning, design and construction support on various water and wastewater treatment and collection system projects including pump station, water and wastewater treatment design, wet weather and other water resource facility projects., • Extensive experience with wide range of pumping systems, HI standards, force mains, process piping, wet well layout including new and rehabilitation projects for wastewater and/or water booster systems., • Ability to conduct hydraulic calculations to support sizing and selection., • Field experience with pump testing, start up and troubleshooting, preparation of O&M manuals., • Ability to mentor and coach staff in technical areas, • Contribute to the company's technical practice in Pumping Systems [coaching, training, developing best practices], • Prepare engineering calculations and supporting analysis of alternatives, • Prepare and evaluate wet weather control alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Prepare project status and other reports, • Communicate project details with other design engineers, • Assist with proposals, marketing, project reports and technical presentations, • Conduct on-site inspections as needed, • Attend client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes; present at selected conferences, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering requiredSkills/Experience:, • 15+ years of related experience required

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As a Senior Project Manager for Large & Special Projects, you'll lead significant and complex projects, partnering with the world's top technology companies on their Data Centers. Your engagement will begin in early planning and continue through construction. Your role will be crucial in planning, executing, monitoring, controlling, and closing these high-impact projects, ensuring they meet the highest standards of quality and technicality. You'll work with senior leaders and experts, assembling top engineering and technical teams to drive project success. You will have autonomy and the responsibility to make choices in the best interests of our people, our clients, the project, and the firm. You'll mentor project managers and technical teams. You'll have ultimate project P&L responsibility as well as the rewards that go with it. You'll create best practices and processes to help us deliver increasingly complicated projects as we grow. Your efforts will help develop the infrastructure that powers the digital operations of major tech firms, impacting billions of users worldwide. We currently have one opening and will consider candidates in multiple locations. Qualifications You are passionate about: • Working collaboratively with others, • Having ownership in the work you do, • Strong organization and communication skills, • Ability to contribute and work well on a team, • Bachelor's degree in engineering, sciences, landscape architecture, or business, • 12 years of experience in the consulting industry, • 10 years of experience in leadership or management, • Ability to plan, execute, schedule, monitor, control, and close a project #LI-MP1 #LI-Remote Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionThis Jobot Job is hosted by: Christian Aviles Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $55,000 - $62,000 per year A bit about us: My client provides water management solutions specializing in precise digital measurement, data delivery, and water preservation software. Why join us? Company-paid Medical, Short-Term Disability, Long-Term Disability, and Life Insurances as well as Employee Assistance Plan Benefits at no cost to our employees 401K Retirement Plan with up to a 7.5% company match Year-end bonus (equal to one month’s pay) eligible Voluntary (employee paid) benefits include dental, vision, accident, critical illness, hospital indemnity, and life/AD&D insurance, flexible savings accounts, health savings accounts Paid time off including holiday, vacations, and sick time Job Details Job Details: Our company is seeking a motivated Product Specialist with a strong background in electronics and engineering to join our dynamic team. This role offers the opportunity to work on cutting-edge technologies and products in the engineering industry. The successful candidate will provide technical expertise, support, and solutions to our customers, while also contributing to the development and enhancement of our innovative product portfolio. We are especially interested in candidates with experience in radio frequency (RF) systems, and ideally with a background in LoRa radio communications or related wireless protocols. Hands-on experience in field engineering, performing measurements, and solving customer issues is highly valued. Responsibilities: Provide technical product support to internal and external customers, addressing their queries and concerns in a professional and timely manner. Conduct field visits to examine equipment, performing measurements to assess product performance and solve equipment issues. Collaborate with the sales team to provide technical product knowledge during client meetings and product demonstrations. Manage inventory and track shipments to and from customers. Stay abreast of the latest trends and advancements in radio frequency, LoRa, and cellular technologies, applying this knowledge to the improvement of our products. Qualifications: Associate degree in engineering or a related field and 2 years’ experience in a similar role within the electronics/engineering industry. In lieu of degree, 4 years’ experience in related field or military training. Strong customer-facing communication and interpersonal skills, with a professional approach. Proven experience with radio frequency, LoRa radio communications, cellular technology, field measurements, and customer support. Excellent problem-solving skills with the ability to troubleshoot technical issues. Ability to conduct field measurements and analyze data to improve product performance. Proficient in using various tools and software used in the engineering industry. Demonstrated ability to work in a fast-paced, team-oriented environment. Willingness to keep up to date with the latest industry trends and advancements. Ability to travel as needed for client meetings and product demonstrations. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Job Description Data Center Construction Project Manager - Owner's Rep - Fort Worth, TX This opportunity is with a leading provider of mission-critical data center solutions as an Owner's Rep for Construction Services. This firm provides a complete life cycle of solutions that are custom-fit to the requirements of their client's mission-critical facilities. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. They build mission-critical facilities for data center facilities nationwide for Enterprise, Colocation and Hyperscale Companies. We are looking for a Data Center Construction Project Manager to support critical facility construction projects. The Construction PM will be responsible for all aspects of managing a data center construction project and act on the Owner's behalf. This will include providing leadership to contractors and vendors associated with the delivery of company projects. The candidate will have overall responsibility for the delivery of assigned projects on budget on time and assurance that the project scope and quality meet Company Design Standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back office work (change orders, budgets, paperwork driven, etc.) Responsibilities: • Maintain liaison with various contractors and vendors in order to manage the day to day activities that impact the delivery of company's critical facilities construction projects, • Ensure that all day to day project responsibilities are met by the contractors and vendors on the project, • Manage multiple projects simultaneously. Responsible for negotiating contracts with vendors as necessary. Responsible for creating and managing project schedules, • Put together Project plans – size up, costs, budget, scheduling, timeline, manage change orders, etc., • Assists with reporting and RFPs to Contractors, • Deliver Built to Suit projects with a heavy emphasis on value-engineering, • Drive Company Standards uniformly as it regards to Project Delivery by all project participants on all projects, • Manage financial aspects of contracts (progress billing, rental equipment, income / expenses) to protect the company's interest and simultaneously maintain good relationship with the client, • Represent the company in project meetings, • Act as key Liaison with managers of all company departments, • BA / BS a plus, • Experience managing Data Center Construction Projects as an Owner or as a General Contractor, • Experience managing a budget, • Minimum of 10 years relevant experience in the Data Center Construction Industry, • Belong and Attend professional organizations such as AFCOM, ASHRAE, 7x24 exchange, PTC, Datacenter Dynamics / DCD, Uptime, iMasons, Bisnow etc., • Client Facing /Client relationship / Client Management skills, • Must be familiar with the design process of building systems for data center and mission critical projects, • Solid Construction Project Management experience, • Effective Communicator – emails, phone and face to face, • Ability to work independently, • Travel as needed to project sites, • Solid Admin skills, • Computer savvy: MS Project, Excel, P6 Oracle Primavera, AutoCAD a plus After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As a Project Manager on our Railroad Bridge team, you will serve as a lead project manager for the team, ensuring successful project deliverables and completion for complex and high-priority projects that may span across multiple teams. This position provides project management direction to the team and ensures quality execution of key projects that provide purposeful, high-quality solutions to successfully solve engineering and design needs. The ideal candidate will have connectivity and prior experience working with CSX / CPKC. Primary Responsibilities will include: • Develops project scopes, schedules, and budgets and tracks progress to manage the financial success of projects and ensure timely completion., • Manages complex contract negotiations., • Leads the execution of project plans by assembling and managing project teams, coordinating availability of internal resources, and assigning individual responsibilities ensuring technical skills, capabilities, and expertise align with project objectives., • Serves as primary liaison between all parties involved in a project., • Monitors progress and measures project performance, ensuring deliverables fall within established scope, schedule, and budget., • Manages change requests, executes risk management techniques, and implements strategies to minimize negative financial impact to the project., • Coordinates detailed reviews of technical work to ensure high-quality work is being performed and the terms, conditions, and specifications outlined in the project contract are being fulfilled., • Maintains an ongoing positive relationship with clients and focuses on exceptional client service to secure future work., • Documents all project deliverables and maintains comprehensive records including correspondence, design plans, and other project related files., • Mentors staff within the team on project management best practices utilizing Olsson Project Management programs and other project support services resources., • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to contribute and work well on a team., • Bachelor's degree in Engineering. In lieu of a Bachelor's degree, an Associate Degree with equivalent experience is required., • Minimum of 6 years of relevant experience supporting railroad projects for CSX / CPKC., • Proven track record in meeting and exceeding client expectations through project management activities., • Excellent client service orientation, communication, and presentation skills., • Solid interpersonal and decision-making skills and the ability to generate innovative and effective solutions to complex problems., • High-level organization, leadership, and negotiation skills., • Detailed understanding of how the firm operates as a consulting business. Recognizing the significance of the role as a leader, committed to driving the organization towards success., • Professional Engineering (P.E.) license is preferred., • Experience in MicroStation, Risa 3D analysis, and Bluebeam Revu., • Valid driver's license and a good driving history., • Willingness to work a flexible schedule and travel as required. Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Minnesota Pay Range$130,000—$179,000 USD Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Illinois Pay Range$130,000—$179,000 USDAdditional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionOur Project Manager leads all phases of construction, from preconstruction to closeout, ensuring projects are completed on time, within budget, and to the highest quality and safety standards. The ideal candidate is a strategic decision-maker with strong financial acumen, a skilled relationship builder, and a proven leader who drives results and fosters collaboration.What you'll do • Safety Management: Enforce compliance with safety programs, ensuring all methods prioritize safety, quality, time, and profit., • Contract and Legal Compliance: Manage and adhere to legal, contract, and design requirements, negotiating changes to maintain or improve project income., • Preconstruction Planning: Analyze plans, budgets, and contracts during preconstruction to ensure readiness and alignment with project goals., • Scheduling and Coordination: Develop and manage project schedules, ensuring timely resource availability and seamless team collaboration., • Procurement and Subcontractor Management: Oversee subcontracts, purchase orders, and change orders while monitoring subcontractor performance for compliance., • Quality Control: Implement Quality Control plans, address issues promptly, and deliver outcomes that meet or exceed client expectations., • Financial Management: Monitor and control costs, forecast revenue, and maintain financial accuracy and accountability throughout the project lifecycle., • Lean and BIM Implementation: Apply Lean principles and lead BIM processes to enhance efficiency, productivity, and scheduling., • Communication and Reporting: Provide regular updates to leadership, prepare detailed reports, and facilitate effective team meetings., • Environmental Compliance: Ensure adherence to environmental regulations and minimize project impact., • Marketing and Business Development: Support marketing strategies, promote services, and provide data to improve project delivery processes.What you bring to the team, • A degree in construction management, engineering technology or similar is a plus., • Proven construction management experience., • Proficiency with construction management software and Microsoft Office Suite (SharePoint, OneDrive, Teams, Outlook, Excel, Word, PowerPoint).Essential Functions, • Perform physical activities such as twisting, stooping, bending, squatting, kneeling, crawling, climbing ladders and stairs, walking on uneven ground, working on scaffolds above ground, and in ditches below ground. Up to seven hours of an eight-hour shift are spent standing., • Work comfortably in confined spaces without fear and demonstrate the ability to read GHS labels on containers through color recognition., • Have depth perception to identify hazards such as excavations and to hear horns or sirens from moving equipment., • Exhibit good finger manipulation skills for precise tasks., • Climb on light and heavy equipment, carry, and use hand tools effectively., • Handle constant lifting of 10 lbs, frequent lifting of 25 lbs, and a maximum single-person lifting capacity of 50 lbs (assistance required for items over 50 lbs). Tasks may involve reaching at, above, or below shoulder height., • Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Work Environment, • Construction site environment. You may be exposed to noise, dampness, heat, cold, dust, fumes (occasionally, but always well-ventilated), chemicals (will work with, but normally won’t work in a chemical environment) and confined spaces (on occasion). Temperatures range from 25º to 115ºF., • Wear puncture-resistant footwear, long pants, and shirts with four-inch sleeves., • Use all required PPE, including hard hats, safety glasses, gloves, high-visibility vests, earplugs, fall protection gear, and respiratory equipment, as provided., • Maintain a professional, clean, and well-groomed appearance., • Work schedule will align with project demands and timelines.Total Rewards, • Employee Ownership: Enjoy ownership from day one., • Competitive Pay: Salary based on market data and performance., • Profit Sharing & Incentives: Share in company success and earn project bonuses., • Vehicle Allowance & Phone Reimbursement: Stay mobile and connected., • Health Coverage: Medical, dental, and vision after 30 days, plus HSA contributions., • Retirement Plans: 401(k) with employer match (Traditional and Roth)., • Wellness Support: Gym and mental health reimbursements., • Career Development: Access SpawGlass University and continuing education assistance.

Job DescriptionWho is Mother Parkers? We are one of the largest tea and coffee manufacturers in North America, with a mission to create a better beverage experience for our customers. As a leading customer solutions provider to some of North America’s largest retailers and foodservice chains, we use state-of-the-art technology and new product innovation to help our customers grow their business and deliver superior products to their clientele. Our team of coffee and tea experts are deeply passionate about what we do, proud of our 100+ years of business success, and excited about building a future with endless possibilities. Come join our team and work among the best, collaborate with high performers, and contribute to challenging work every day! The Role: We are looking for an experienced Quality Assurance Supervisor to join our Quality Assurance team at our Fort Worth plant. As a member of both our quality leadership and plant management teams, your mandate is to oversee the day-to-day quality-operations. You will ensure that Quality systems are monitored and followed, supervise the production shift of Quality Assurance technicians, and act as the back up to the QA Manager in their absence. What you get to do: • Provide supervision to the hourly production shift of QA Technicians which includes planning work, training, skills development and conducting performance reviews., • Lead continuous improvement of the day-to-day documentation compliance and ensure the quality of operation documentation., • Investigate and follow-up on non-compliance and product defects., • Lead the investigation and resolution of low to medium quality incidents, product holds, customer & consumer complaints., • Conduct daily GMP audits and follow up on results., • Conduct traceability exercises, update quality SOP’s, and support product qualifications., • Supervise the sanitation crew., • Initiate and take appropriate action to ensure the integrity of the SQF code., • 4+ years of quality assurance experience in a food & beverage or pharmaceutical manufacturing environment., • Degree or Diploma in a Sciences or Industrial Engineering discipline., • Experienced in a recognized GFSI scheme., • Full understanding of GMP’s, Product Safety & Security., • Have a working knowledge of SPC (Statistical Process Control) applications and implementation., • An understanding of laboratory analytical equipment., • Project Management skills., • Capable of making judgement, risk and business decisions., • Ability to plan, organize and direct work., • Competitive Total Rewards package – health benefits coverage on day 1, employer matched 401k savings plan., • Employee discount program on our coffee and tea products., • Tuition Assistance Program – we value continuous learning and self-development., • Dress for your day – when you’re in the office, come in your jeans, or a business suit if you’re meeting with a client. By providing your information to us, you understand and agree to Mother Parkers Tea & Coffee’s Privacy Policy: While Mother Parkers welcomes all applications, we do not accept unsolicited resumes from employment agencies or search firms. Only those candidates who meet the minimum requirements will be contacted. Mother Parkers is committed to providing accommodations for persons with disabilities. Accommodation is available on request for candidates taking part in all aspects of the selection process.

Job Description About Us Catalyst Labs is a leading talent agency with a specialized vertical in Applied AI, Machine Learning, and Data Science. We stand out as an agency thats deeply embedded in our clients recruitment operations. We partner directly with: AI-first startups building products powered by LLMs, generative AI, intelligent automations, Established tech companies: scaling their ML infrastructure, recommendation systems, and data platforms, and Enterprise innovation teams integrating AI into traditional domains such as finance, healthcare, and logistics. We collaborate directly with founders, CTOs, and Heads of AI in those themes who are driving the next wave of applied intelligence from model optimization to productized AI workflows. We take pride in facilitating conversations that align with your technical expertise, creative problem-solving mindset, and long-term growth trajectory in the evolving world of intelligent systems. Our Client Is a San Francisco based startup building a GenAI-native platform that automates one of the most complex, time-consuming challenges in finance and Tax and turning dense tax documents into structured, usable data in minutes. Their system processes everything from K-1s and K-3s to intricate footnotes with near-human precision, achieving over 99% accuracy on income lines and streamlining workflows across Excel and API integrations. They serve some of the most sophisticated players in private wealth, and asset management, helping them move faster and make better decisions in an industry where accuracy and speed define competitiveness. Backed by seasoned founders and AI leaders from top-tier tech companies like facebook and salesforce, this team combines product craftsmanship with cutting-edge machine learning to bring intelligence to a domain that has long resisted automation. Recently acquired by a global technology leader, the company now operates with the mindset, pace, and creative autonomy of a startup but with the stability, benefits, and resources of an established enterprise. Youll be joining a team of proven builders whove scaled products to acquisition, engineered systems that power billions of data points, and are now applying GenAI to redefine how financial data is understood, structured, and acted upon. Location: Union Square, San Francisco Work type: Full Time, 5 days a week On-Site. Compensation: above market base + bonus + equity Visa: sponsorship available for candidates with demonstrated brilliance and expertise. What we are looking for Were seeking an Applied AI / ML Engineer with 5+ years of experience building and scaling commercial machine learning systems in meaningful ownership roles, especially with document understanding and extraction. You are an exceptional builder who thrives at the intersection of real world features and AI/ML engineering, someone who not only understands how models work, but also how to use them to deliver real, measurable value to end users. This role is central as they scale their GenAI-native platform for tax document processing, combining the velocity of a startup with the backing of resources and reach of a large multi national firm. Roles & Responsibilities * Build and scale the ML and product infrastructure that powers intelligent tax document processing at production scale. * Design and optimize inference systems, dataset pipelines, and specific logic to improve accuracy, speed, and quality as we expand to millions of documents. * Collaborate closely with accountants and tax domain experts to deeply understand workflows, pain points, and quality thresholds translating insights into productized ML systems. * Integrate inference pipelines into a seamless, end-to-end experience that transforms how tax professionals process and interpret documents. * Develop expert systems that encode institutional tax knowledge into scalable, maintainable software components. * Drive experiments, measure outcomes, and iterate rapidly on core ML metrics. * Collaborate cross-functionally with product, engineering, and leadership to shape technical direction and influence product vision. Qualifications Core Experience * 4+ years of experience in machine learning / AI engineering with proven end-to-end ownership of ML-powered products. * Strong track record of building systems that create direct user value, not just research prototypes or internal tooling. * Demonstrated ability to work with large, complex datasets, optimizing for accuracy, scalability, and reliability. Strong fundamental understanding of how to build, measure, and iterate on ML systems and ML-powered enterprise or consumer products. * Comfortable with Python and popular ML libraries (e.g. pandas, scikit-learn, spaCy, pytorch, tensorflow, keras), cloud providers such as GCP/AWS, container technologies (e.g. Docker, Kubernetes), web application development including Python-based web servers (e.g. Flask, Django), and database and storage layers (e.g. Postgres, SQL, S3/GCS). * Experience deploying or integrating LLMs, LLM APIs, Agents and prompt engineering into production systems. * Strong Python proficiency and hands-on familiarity with ML infrastructure and data workflows. * Experience in document understanding, OCR, or applied NLP. * Exposure to financial or tax-related data environments. * Startup or 01 product experience. Soft Skills * Exceptional problem-solving ability, curiosity, and product intuition. * Strong communication skills with the ability to engage directly with domain experts and translate complex needs into technical solutions. * Growth trajectory demonstrated through promotions or increasing scope of responsibility.

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As a Senior Electrical Designer on our Data Center team, you will work collaboratively with engineers and other technicians on the team using CAD software to create plans and perform design work. You will also contribute to project production sheets by adding dimension/layout plans and title/detail sheets. You may also travel occasionally to job sites for observation, and/or field work, working in all types of terrain and weather conditions. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to contribute and work well on a team., • Associate's degree in drafting., • 8 or more years of drafting experience., • Knowledge of CAD/Revit and BIM software required., • Valid driver's license., • Experience with Microsoft products, including Word and Excel, and Adobe or Bluebeam. #LI-JP1 #Remote Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Manufacturing Engineering TechnicianThis is an exciting opportunity to join a Global, industry leading company. The Manufacturing Engineering Tech will review maintenance and calibration schedules, coordinate with vendors, and ensure production equipment is operational and compliant. Additionally, you’ll be asked to troubleshoot issues, perform IOPQ testing, support R&D and manufacturing engineers with experiments or prototypes, and coordinate facility-related tasks. Responsibilities: • Provide engineering support by troubleshooting equipment, performing IOPQ testing, building prototypes, and assisting with process improvements., • Deliver facilities support by coordinating infrastructure projects, managing preventive maintenance and calibrations, and ensuring equipment and systems are compliant and operational., • Offer manufacturing support by assisting production teams as needed, resolving equipment issues, and maintaining smooth day-to-day operations., • Facilitate cross-functional collaboration with R&D, manufacturing engineers, and third-party vendors to ensure projects and site initiatives are executed efficiently., • Contribute to continuous improvement and operational efficiency by identifying technical solutions, optimizing processes, and supporting compliance initiatives. Requirements and Desired Experience:, • Minimum: Associate degree or equivalent coursework in Engineering, Manufacturing Technology, Life Sciences, or related technical field., • Preferred: Bachelor’s degree in Engineering, Biotechnology, or a related scientific/technical discipline., • Work Experience: Work in manufacturing, • 1–5 years of hands-on technical experience in a manufacturing environment., • Experience troubleshooting and maintaining production equipment and instruments, • Prior experience in regulated environments (cGMP, ISO, FDA) is preferred.Pay Range (Based on Experience & Qualifications): $30 - $33 per hour

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: We are seeking a highly skilled chemical, mechanical, controls, or process engineer to join our team as a Commissioning Engineer for equipment and process roll-outs for a heavy industrial manufacturing project focused on rare earth permanent magnets. As the Commissioning Engineer, you will play a pivotal role in ensuring the successful installation, testing, and commissioning of manufacturing equipment and systems. Your expertise will be essential in guaranteeing the efficiency, reliability, and safety of our production processes. Position Responsibilities: • Take part in implementation of commissioning plans, help maintain the commissioning schedules and develop procedures for the installation and startup of rare earth permanent magnet manufacturing equipment as well as all supporting infrastructure., • Lead and plan the daily activities of commissioning contractors, ensuring efficient execution of startup tasks while actively supporting troubleshooting and issue resolution during system commissioning., • Collaborate with the Capital Projects team, Construction contractors, and MP engineering to oversee the installation of machinery, ensuring adherence to specifications and industry standards., • Develop and conduct test plans and performance evaluations on individual equipment components and integrated systems to identify and resolve any issues or deficiencies., • Troubleshoot and diagnose equipment malfunctions or component operational discrepancies, implementing effective solutions in a timely manner., • Ensure all commissioning activities comply with relevant safety regulations and MP EHS policies, actively promoting a culture of safety among team members and subcontractors., • Maintain accurate records of commissioning activities, including test results, equipment manuals, as-built drawings, and commissioning reports., • Provide training and guidance to operations and maintenance personnel on the proper use, maintenance, and troubleshooting of manufacturing equipment and systems., • Work closely with technology, construction, process engineering, and operations teams to coordinate commissioning activities and address any cross-functional issues or dependencies., • Support the Start-Up of newly deployed equipment and ensure an organized handover to operations and continue to support operations with future capital equipment improvements., • Participate in PHAs, HAZOPS, Fabrication Reviews, FATs, and SATs (may require occasional travel)., • Bachelor's degree or higher in Chemical Engineering, Mechanical Engineering, Electrical Engineering, Controls Engineering, Process Engineering, or a related field., • Proven greenfield and brownfield experience in commissioning heavy industrial manufacturing or O&G equipment, preferably in the metals/materials manufacturing industry., • Strong technical knowledge of mechanical, electrical, control systems, and process with the ability to interpret engineering drawings, schematics, and specifications., • Proficiency in troubleshooting complex machinery and systems, with a systematic approach to problem-solving and attention to detail with an emphasis in redlining P&IDs, Electrical Drawings, and Control Diagrams., • Experience with relevant industry standards and regulations, such as ISO, ANSI, and NFPA, as well as safety protocols such as lockout/tagout and confined space entry., • Excellent communication and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams and communicate technical information to non-technical stakeholders., • Demonstrated leadership abilities, including the capacity to manage priorities, delegate tasks, and motivate team members to achieve project objectives. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a hands-on Engineer to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets. The Engineer will specialize in hands-on experimental magnetics research with a focus on powder processing. This includes custom setup design, pilot-scale experimental trials, and materials characterization. This position will have responsibility for a broad range of initiatives, including design of materials for optimum performance, to manufacturing process development and optimization, and more. This is a rare opportunity to play a key role in returning an essential manufacturing capability to the USA. Position Responsibilities: • Develop and optimize powder production processes for prototype magnets., • Collaborate with production teams to scale processes from pilot to manufacturing operations., • Manage technical reports, generate SOPs, document and communicate findings, and build team knowledge of current and future magnet prototyping., • Supervise technicians and junior engineers to ensure high-quality execution of experimental trials., • Work closely with EHS to ensure that all work is done to ensure world-class health and safety, and full compliance with relevant environmental regulations., • Bachelor’s or master’s degree in Materials Science & Engineering, Metallurgy, Physics, or related field., • Experience with metallurgical or ceramic powder processing., • Strong knowledge of powder metallurgy, particle size reduction and air-sensitive powder handling., • Proficiency in materials characterization techniques such as XRD, SEM, and particle size analysis., • Demonstrated ability to design and execute experiments, analyze data and draw actionable conclusions., • 3+ years of industry experience in pressing, sintering, and heat treatment of metals and/or ceramics., • Knowledge and experience of processing rare earth materials and permanent magnets., • Strong troubleshooting skills with pilot plant equipment and process control. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job DescriptionResponsible for leading quality engineering team and quality process in a dynamic Agile environment. Champion for establishing a quality engineering process aligned with the wider organizational strategy and leading a team that promotes customer satisfaction which positively impacts the financial performance. Drive continuous improvement efforts and defect reduction initiatives by inspiring teams to technically innovate and improve their process ESSENTIAL DUTIES AND RESPONSIBILITIES: • Understands/suggests automation approaches used on the projects and is able to provide guidelines in automation strategy as needed for the specific technology stack of the application under tests., • Understands performance examination strategy and partners with performance team to assure the strategy is sound., • Grows and mentors team members in automation, Agile and Continuous Integration/Continuous Delivery (CICD) space., • Partners with other project stakeholders across organizations such as development, product management and customer support to align and prioritize quality initiatives., • Understands client issues and drives root cause analysis (RCA) and implementation of processes that will improve quality of releases., • Ensures efficiency, integrity and completeness of tasks related to quality engineering and examination within Agile process., • Plans, promotes, and organizes training activities related to quality and reliability.QUALIFICATIONS REQUIRED FOR POSITION: Bachelor's Degree (four-year college or technical school) Preferred, Field of Study: Information science, computer science, engineering, or a computer science-related field., • 5+ years of global, enterprise level leadership experience in Software Quality Engineering., • 5+ years of experience managing geographically distributed and offshore teams., • 5+ years of proven global Agile/Scrum exam experience., • 7+ years working knowledge building out automation frameworks within the Enterprise QA specifically with automation frameworks such as Selenium, WATIR, TestNG, Junit, Cucumber, Blaze meter, • 3+ years proven experience transforming manual examination teams to high efficiency automation centric software development engineering test (SDET)., • 5+ years proven experience supporting the creation of and driving automation frameworks to allow for in-sprint automation., • 3+ years working knowledge of performance examination, • 3+ years working knowledge of Dev Ops and Continuous Integration/Continuous Deployment

Job DescriptionBenefits: • Competitive salary, • Health insurance, • Opportunity for advancement, • Paid time off, • Successfully sell CNC machine tools and manufacturing solutions by establishing and building relationships with existing and new CNC machine tool customers., • Close sales and meet or exceed goals, • Visit customers to understand their business, uncover and anticipate needs, and propose appropriate solutions, • Partner with Applications Engineering staff for technical support and demonstrations, • Develop and present solutions that address specific customer needs and requirements, • Manage critical projects to ensure customer satisfaction, • Maintain strong collaborative relationships with all team members and departments, • Maintain an in-depth knowledge of the machine tool industry and product lines represented by the company and a thorough knowledge of competitor products and services, • Maintain CRM database; contacts, accounts, activities, forecast, quotes, etc.Requirements, • Intermediate to advanced knowledge of CNC machine tools and technology. Previous experience in a manufacturing environment, • Clear, concise, confident, and persuasive communicator. Excellent listening and questioning/clarifying skills. Effective writing skills., • Ability to creatively explain and present complex concepts in an easy-to-understand manner, • Self-directed and goal-orient, • Ability to stay organized and manage time effectively to meet daily, monthly, and annual goals. Excellent follow-up and tracking skills, • Creative and adaptable improviser with an ability to work through unforeseen obstacles, • Professional demeanor, • Must work well with others and have a team-focused approach, • Valid drivers license and acceptable driving record, • Salary/draw transitioning to commission. Initial salary/draw of $60,000-$80,000/year. Total potential earnings ranging from $90,000 - $150,000+/year, • Health Insurance Available. (80% Contribution from Company), • Mileage, • Expenses, • Cell phone, • Laptop, • On-going sales, product and technical training providedWe are committed to providing Equal Employment Opportunities to all employees and applicants.

Job DescriptionThe RoleAt TimelyCare, we are seeking a Product Manager to join our team and shape the future of digital care for campus communities.. This is an excellent opportunity for someone with at least 2 years of experience in education technology, telehealth, or consumer-based products who is eager to grow their product management career. You’ll collaborate with engineering, care stakeholders, and marketing to design and deliver solutions that elevate the student experience. You’ll leverage data to derive insights, test hypotheses, and inform product decisions. As part of an agile, fast-moving, team, you’ll own key product features and flows while learning from senior product team members.What You'll Do • Own and deliver specific product features or flows (e.g., onboarding, student engagement pathways) from discovery through launch., • Partner with engineering and design in an agile environment that leverages AI-prompted coding tools to build, test, and release solutions quickly., • Use data from customer interactions and feedback (Pendo, Aha!, Gong) to uncover actionable customer insights, measure success, and guide prioritization., • Collaborate with UX to conduct user research (interviews, usability tests, feedback loops) to deeply understand student and stakeholder needs., • Translate insights into clear problems to solve with supporting user stories., • Define and track outcome metrics for your initiatives (e.g., adoption rates, satisfaction, and engagement), • Partner with cross functional teams including care stakeholders, marketing, and business teams to drive adoption and engagement., • Embrace rapid iteration, adaptability, and experimentation as part of a growth-stage business., • Performs additional tasks and projects as needed to support the evolving needs of team objectives and company goals. What You Bring, • 2+ years of product management or related experience in edtech, telehealth, or consumer digital products., • Passion for building customer-first solutions that enhance student experiences., • Strong analytical skills with the ability to leverage data and AI tools to derive insights, run experiments, and measure outcomes., • Collaborative mindset with experience partnering effectively across engineering, design, and business stakeholders., • Familiarity with agile methodologies and exposure to technical development processes., • Curiosity about emerging technologies (AI-driven development, digital health integrations)., • Excellent communication, organizational, and problem-solving skills., • Adaptability, ownership and eagerness to grow in a fast-paced, evolving environment.Benefits + Perks, • Paid Company Holidays + No work on your birthday!, • Flexible PTO + Volunteer Time Off (VTO) as an organization to give back to the community, • Variable bonus eligibility on a quarterly basis, • Company-sponsored Health Insurance (Medical, Dental, Vision) + Pet Insurance, • Company-paid group Life Insurance + Company-paid Short Term Disability, • Concierge benefit support services, • 401(k) with employer match, • Free access to TimelyCare virtual medical and mental health support

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a hands-on Senior Engineer to join the Magnet Technology group to support development technologies for advanced manufacturing to produce high-performance rare earth permanent magnets. The Senior Engineer will specialize in hands-on experimental development efforts related to front-end magnet-making processes, including but not limited to strip casting, powder processing, pressing, and sintering. Responsibilities include designing custom experimental setups, running experimental campaigns on pilot-scale equipment, and materials characterization using techniques such as magnetometry, microscopy, and chemical analysis. In addition, the Senior Engineer will provide technical leadership to junior engineers and technicians, drive cross-functional collaboration with production teams, and play a key role in setting technical directions for future process improvements. The role encompasses a broad range of initiatives, from designing materials for optimum performance to developing and optimizing manufacturing processes. This is a rare opportunity to play a key role in returning an essential manufacturing capability to the USA. Position Responsibilities: • Lead experimental projects, overseeing project planning, execution, and delivery of scalable new materials and processes for rare-earth permanent magnets., • Design and conduct experiments to optimize new materials and processes for rare-earth permanent magnets., • Leverage materials characterization techniques including SEM, XRD, particle size analysis, etc. to suggest actionable process improvements., • Collaborate with production teams to scale processes from pilot to manufacturing operations., • Mentor technicians and engineers to ensure high-quality execution of experimental trials and data collection, providing technical guidance in metallurgical materials, and fostering a culture of continuous learning and professional development., • Lead the generation of technical reports and SOPs, document and communicate findings, and build team knowledge of current and future magnet prototyping., • Work closely with EHS to ensure that all work is done to ensure world-class health and safety, and full compliance with relevant environmental regulations., • Master’s or Ph.D. in Materials Science & Engineering, Metallurgy, Mechanical Engineering, or related field., • 5+ years of experience in manufacturing or R&D demonstrating successful process development across metals, ceramics or related systems., • Strong knowledge and experience with process development in areas such as casting, powder metallurgy, pressing, or sintering., • Proficiency in materials characterization techniques such as XRD, SEM, and particle size analysis., • Demonstrated ability to design and execute experiments, analyze data, and draw actionable conclusions., • Experience with manufacturing of rare earth materials and permanent magnets., • Strong troubleshooting skills with manufacturing equipment and process control., • Experience leading technical development projects, with the ability to prioritize and manage multiple concurrent projects., • Strong skills in analyzing experimental data using tools such as Python, MATLAB, or statistical software to draw actionable insights and guide decision-making. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description SUMMARY Under the general direction of the Vice President of Operations, the Safety Manager is responsible for implementing, monitoring, and supporting safety programs, policies, and procedures across all four manufacturing locations in Southern California, Northern California, Denver, CO, and Fort Worth, TX. This position ensures compliance with OSHA and other applicable safety regulations by conducting inspections, analyzing workplace risks, and promoting a safety-first culture. The Safety Manager supports hazard prevention, risk mitigation, and employee training while contributing to the continuous improvement of workplace health and safety. Bilingual in English and Spanish strongly preferred to support communication across diverse teams. ESSENTIAL DUTIES AND RESPONSIBILITIES The Safety Manager is expected to rely on their extensive experience and expertise to fulfill the functions of the role with minimal supervision. This position requires the customary and regular exercise of discretion and independent judgment in the performance of the following essential duties: • Implements and maintains company-wide safety policies and procedures in accordance with OSHA and other regulatory standards., • Conducts regular safety audits and workplace inspections across all four plant locations to identify and correct unsafe conditions., • Assists in developing and delivering employee safety training programs, including topics such as PPE, lockout/tagout, hazard communication, and emergency response., • Investigates with plant leadership on incidents, near misses, and accidents; documents findings, and recommends preventative measures., • Partners with Plant Managers and Supervisors to ensure safety procedures are consistently followed and integrated into daily operations., • Collects and maintains data on all safety events, compiles reports, and presents findings to site and senior leadership., • Supports site teams in promoting awareness of safety practices and expectations across all departments., • Evaluates workplace conditions and processes for potential risks and compliance gaps; recommends and implements improvements., • Coordinates safety-related initiatives including fire prevention, hazardous materials handling, and environmental health practices., • Maintains SDS files and ensures up-to-date documentation across sites., • Collaborates with HR, Operations, and Maintenance departments on safety-related matters and regulatory updates., • Supports continuous improvement efforts focused on safety and compliance., • Other duties may be assigned when needed. EDUCATION and/or EXPERIENCE Bachelor’s degree in Occupational Safety, Industrial Technology, Industrial Engineering, or a related field preferred. Requires 2–4 years of experience in a manufacturing safety role or equivalent combination of education and experience. SKILLS Language: Ability to read, analyze, and interpret safety regulations, technical documents, and business communications. Ability to write reports and policies. Strong presentation and communication skills with all levels of the organization. Bilingual in English and Spanish strongly preferred to support effective training and communication across sites. Computer: Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint. Reasoning: Ability to apply concepts such as statistical analysis, rates, ratios, and percentages to interpret safety trends and data. Ability to solve complex problems and manage multiple priorities across locations. Able to interpret regulatory requirements and adapt them to operational realities. Other: Attention to detail and organizational skills are necessary. Ability to conduct instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS OSHA 30-Hour Certification required; CSP or ASP preferred. Valid driver’s license and ability to travel between locations (approximately 25-30% travel required). PHYSICAL DEMANDS While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk, and sit. The employee must occasionally lift and/or move up to 25 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT While performing the duties of this job, the employee will work on a computer and other office equipment. While visiting the plants the employee is frequently exposed to moving mechanical parts and sharp, heavy objects. The employee is occasionally exposed to fumes or airborne particles, outside weather conditions, and vibration. The noise level in the work environment may be loud when visiting manufacturing plants, otherwise an office environment and noise is expected. Final compensation will be determined based on several factors, including location, experience, and qualifications.

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As an Electrical Engineer on our Data Center team, you will be responsible for designing and coordinating electrical systems using Revit including the creation of Construction Documents and specifications. Responsibilities include coordinating with other disciplines, performing supporting calculations, meeting with clients to discuss conceptual and final designs, and travel to job sites for observation. Our electrical design services can include power distribution, lighting, and electrical modeling. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills, • Ability to contribute and work well on a team, • Bachelor's degree in Electrical Engineering, • Must obtain Engineer Intern (EI) certificate, • 2-6 years of experience in Electrical Engineering, • Prior Revit experience is required, • Data Center experience preferred, • Strong attention to detail #LI-JP1 Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Sr Developer Location: Fort Worth, TX Interview: Onsite Exp: 8+ Years Description: Collaborates with leaders, business analysts, Product Owners, IT architects, technical leads, and other developers, along with internal customers, to understand requirements and develop needs according to business requirements Maintains and enhances existing enterprise services, applications, and platforms using domain-driven design and test-driven development Troubleshoots and debugs complex issues; identifies and implements solutions Creates detailed project specifications, requirements, and estimates Researches and implements new technologies to enhance current processes, security, and performance Supports the development of coding standards and adheres to best practices and security guidelines Works closely with software architects and technical leads to ensure decisions meet long-term enterprise growth needs Minimum Qualifications- Education & Prior Job Experience Bachelor's degree in Computer Science, Computer Engineering, Technology, Information Systems (CIS/MIS), Engineering or related technical discipline, or equivalent experience/training 3 years of full Software Development Life Cycle (SDLC) experience designing, developing, and implementing large-scale applications in hosted production environments 3 years of professional, design, and open-source experience Kubernetes and Cloud Experience preferably Azure Java Springboot Preferred Qualifications- Education & Prior Job Experience Master's degree in Computer Science, Computer Engineering, Technology, Information Systems (CIS/MIS), Engineering or related technical discipline, or equivalent experience/training 5 years of full Software Development Life Cycle (SDLC) experience Airline Industry experience All you'll need for success Skills, Licenses & Certifications • Proficiency in Full Stack Development, • Proficiency in object-oriented design techniques and principles, • Proficiency in Microsoft Office Tools (Project, Excel, Word, PowerPoint, etc.), • Experience in Agile methodologies, such as SCRUM

Job Description Sr Automation Engineer Job Summary The Senior Automation Engineer will lead the design, implementation, and optimization of advanced automation systems to transform manufacturing operations. This strategic role requires deep technical expertise in robotics, control systems, and Industry 4.0 technologies to drive innovation, reduce costs, and enhance quality in high-volume production. The ideal candidate will mentor junior engineers and collaborate with cross-functional teams to develop cutting-edge automation solutions aligned with business objectives. Key Responsibilities 1. Advanced Automation Leadership • Architect and implement large-scale automation systems (robotic workcells, autonomous guided vehicles, smart conveyors) to replace manual processes, • Spearhead digital transformation initiatives including IIoT, machine learning, and digital twin implementations, • Serve as technical authority on safety standards (RIA R15.06, OSHA 1910.212) and risk assessments for automation projects 2. Technical Project Management • Lead capital projects ($500K-$5M scope) from concept to commissioning, including vendor selection and budget management, • Develop ROI models and present business cases to executive leadership, • Create and maintain technical documentation (system architectures, validation protocols, O&M manuals) 3. Systems Integration & Innovation • Design PLC/HMI/SCADA systems (Allen-Bradley, Siemens, Ignition) with MES/ERP integration, • Implement predictive maintenance systems using vibration analysis and machine learning, • Evaluate and pilot emerging technologies (cobots, 3D vision, edge computing) 4. Team Development & Continuous Improvement • Mentor junior engineers and technicians in automation best practices, • Conduct technology roadmapping to align automation strategy with business goals, • Lead Kaizen events to optimize existing automated systems Qualifications Education & Certifications • Required: BS/MS in Electrical, Mechanical, or Mechatronics Engineering, • Preferred: PE license, PMP, or Certified Automation Professional (CAP) Experience • 7+ years in industrial automation with 3+ years in senior/leadership roles, • Proven track record in:, • High-volume manufacturing (electronics, automotive, medical devices), • Full project lifecycle management (>$1M automation projects), • Advanced robotics (Fanuc, ABB, KUKA) and vision systems (Cognex, Keyence) Technical Expertise • Mastery of:, • PLC programming (Structured Text, Function Block Diagram), • Industrial networks (Ethernet/IP, Profinet, OPC UA), • Simulation tools (AutoCAD Electrical, Delmia, Process Simulate), • Working knowledge of:, • Python/C for automation scripting, • SQL for manufacturing data analysis

Job DescriptionThe System Designer II will be required to provide design, engineering, modeling, drafting, and budgeting support for projects throughout the organization, across all North American Geographies. Additionally, they will assist the Design Group Leadership and Colleagues in continuing to build our company design standards, templates, blocks, families, details, and processes. Roles & Responsibilities: • Coordinate and interact with customers (end users, architects, construction managers, general contractors, electrical engineers, and others) to understand their needs and then perform detailed designs Low Voltage technology systems such as Cabling, Security, Audio Visual and DAS., • A Systems Designer may specialize in one Low Voltage Trade, but all Systems Designers are expected to pursue cross training across disciplines., • Attend and host meetings independently on behalf of Paladin. Take and distribute accurate and timely notes to the team, follow up with action items assigned and communicate company commitments., • Coordinate and interact with estimators and engineers throughout the organization, including all geographies across North America, to develop project budgets, technical design requirements and scopes of work related to the design of all sub-disciplines of Low Voltage Technology Systems., • Coordinate and interact with the Sales team and other Project Sponsors to understand the needs and expectations of the client and project and to ensure the best possible client experience., • Prepare detailed and accurate budgets, utilizing technical estimating resources where necessary., • Perform electronic takeoffs using Bluebeam software as directed., • Manage the Designers assigned projects to include billing, cash flow, cost projections and schedule management., • Create technology systems flow line diagrams., • Develop Security riser diagrams, door details, and mounting diagrams., • Develop network diagrams., • Perform the Designer’s own drafting and modeling using Autodesk CAD and Revit software as needed and as practical., • Coordinate and collaborate closely with Paladin’s Drafters and BIM Modelers to provide clear CAD requests, feedback, and guidance for Drafting and modeling work related to the Designers projects that will be performed by the VDC team., • Provide supplemental Peer Reviews of designs and documentation prepared by others throughout the organization as directed., • Participate in both internal and external kickoff meetings as needed to support a smooth transition and exchange of information as a project passes from the design to the build phase., • Perform construction administration on design projects as assigned., • Provide advice, assistance and support to estimators, engineers, project managers and other Paladin employees when requested., • Provide support for existing or potential customers with the utmost professionalism at all times whether on the phone, in writing (email or text/direct message) or in person.Required Qualifications:, • 5+ years of design experience, • 5+ year of experience in the low voltage or technology industriesPreferred Qualifications:, • Competency in various software platforms typical in the design industry, including (but not limited to): AutoCAD, Revit, MS Office Suite (Word, Excel, Outlook) MS Teams, MS Projects, etc., • RCDD, CTS, PSP or other Low Voltage Design Certifications Highly preferredDemonstrated Professional Competencies:, • Effectively and professionally manage multiple communications platforms (email, collaboration/messaging (MS Teams), • Increase AV & Security Systems knowledge periodically throughout the year., • Increase Networking knowledge periodically throughout the year., • Maintain and increase industry recognized certifications like CTS, CSPM, etc., • Maintain and stay current with Voice/Data Cabling Systems knowledge periodically throughout the year., • Increase and maintain knowledge of current product offerings for Video Management Systems, Audio/Visual control and distribution systems, cameras, access control management platforms, and other low voltage technology components., • Possess and develop superior communication skills, as well as various other “soft skills” such as approachability, emotional maturity, listening skills, adaptability, and interpersonal skills.Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Must be able to effectively communicate, (i.e., see, hear, speak, and write clearly) in order to communicate with employees and/or other customers; manual dexterity required for occasional reaching and lifting of small objects, and operating office equipment.Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job., • The office is clean, orderly, properly lighted, and ventilated. Noise levels are considered low to moderate. Paladin Technologies is a premier North American complex systems integrator for building technology solutions, including IP security, alarms & monitoring, audio visual, low-voltage infrastructure, and networking. As a leader in the design, deployment, optimization, management, and maintenance of communication and digital networks, Paladin can meet the needs of clients on a national scale, while providing local support. Our team is the best in the industry, with manufacturer trained technicians, PMP-certified project managers, CTS- and RCDD-certified design engineers, coordinators, and administrative resources. Paladin has offices coast to coast across the United States and Canada, and nearly 1,700 talented and committed professionals dedicated to custom-crafting and installing technology solutions for clients requiring Integrated Security, Network Infrastructure, Audio Visual, Fiber Optics/OSP, Structured Cabling, and more. We are always at the forefront of the changing technology landscape, and through continued training, complex client projects, and company support, we provide our colleagues with exciting challenges and a rewarding career as Paladin continues to grow. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Equal Opportunity Employer, including disability & veterans, or any other characteristic protected by law. If you need accommodation for any part of the application process, please send an email or call 1-855-296-3199 to speak with Human Resources and let us know the nature of your request. We thank you for your application, however only those selected for an interview will be contacted. Powered by JazzHR zZAnaJqIGW

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As an Electrical Engineer, you will work directly with some of the world's largest technology companies and other mission-critical clients. You will serve as an electrical engineer on projects, design calculations, write technical reports, and prepare documents. Experience in the Data Center industry is preferred. You will also coordinate with other Olsson teams, professional staff, technical staff, and clients. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills, • Ability to contribute and work well on a team, • Bachelor's degree in electrical engineering, • 8+ years of electrical engineering experience, • Licensed PE, • Ability to be a self-starter to take on a variety of tasks to best serve the client and their project work, • Investigation and troubleshooting of problems to find solutions #LI-JP1 #Remote Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® is hiring a Vice President, Enterprise Application and Optimization. The Vice President, Enterprise Application and Optimization is a strategic and operational leader supporting Allied Universal Technology Services (AUTS), a growth business unit of Allied Universal. The Vice President is responsible for driving technology strategy and execution through partnering across sales, engineering, operations, and business intelligence teams. Additionally, this role will coordinate and chair cross-functional, corporate initiatives. The ideal candidate brings a strong background in application architecture, project management, and cross-functional collaboration in B2B or project-based services environments. • Onsite, in-office role Candidates must be local; relocation assistance is not provided RESPONSIBILITIES: • Strategic Leadership: Develop and execute a comprehensive business application strategy that aligns with AUTS's vision, including roadmaps for applications, data management, and best-in-class system integration. Support the company's ongoing AI-powered digital transformation initiatives that enhance business processes and customer experiences. Coordinate the company's strategic initiatives, ensuring there is a platform and approach to drive the management accountability and execution, • Application Management: Direct the development, deployment, and integration of business applications across the organization. Ensure applications meet high standards of quality, security, and performance, • Operational Execution: Lead and develop business intelligence platforms to ensure delivery of accurate, actionable reporting and performance analytics. Partner with Finance, Sales, and Operations to drive margin optimization, resource utilization, and continuous performance improvement. Champion a culture of data transparency, real-time reporting, and insight-led data throughout the business. Identify opportunities for automation and systems integration, • Innovation: Foster a culture of innovation. Stay abreast of emerging technologies and industry trends to identify opportunities for advancement and competitive differentiation, • Risk Management and Compliance: Ensure applications and architecture adhere to legal, regulatory, and security standards, • Team Leadership and Development: Lead, mentor, and develop a high-performing team. Promote a culture of excellence, collaboration, and continuous improvement. Manage talent acquisition and development strategies to build and retain a skilled workforce, • Stakeholder Engagement: Work closely with business leaders to understand their needs and ensure the business applications deliver value. Communicate effectively with stakeholders at all levels, translating complex technical concepts into business terms, • Bachelor's degree in computer science, information technology or a related field, • Minimum of ten (10) years of experience in a senior leadership role overseeing applications strategy, architecture, management, configuration and development, • Experience with the following:, • Managing operating and capital budgets, • Overseeing and supporting SAP environments, • Managing onshore third-party VARs for ERP (SAP) support, • Operating in a matrix-based management organizational environment with both field and back-office stakeholders, • Project-based revenue models or recurring monthly revenue and subscription-based contracts, • Hands-on project management and leadership of company-wide multi-functional initiatives, • Regulatory governance requirements in a SOX-based environment, • Proven track record of developing and implementing strategies that have delivered significant business value, • SAAS and cloud-based environments, • Knowledge of CRM, CPQ, ERP/SAP, engineering design, and Business Intelligence systems (e.g., SAP, Salesforce, ServiceNow, WeEstimate, Domo, Tableau, or similar), • Deep understanding of application development methodologies and cloud computing, • Strong leadership and team-building skills, with the ability to motivate and inspire a diverse team, • Experience in SAP ByDesign (BYD), SAP ECC, SAP S/4 HANA, • Experience in Microsoft Office 365, MS Power Automate and other MS Tools, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's retirement SIP plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Executive flex vacation plan #LI-BL Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1439805

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Injection Molding Process Technician - 1st/2nd/3rd Shift for our client in the Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Worth, TX Salary: $60,000-$65,000/Annually Role: Injection Molding Process Technician - 1st/2nd/3rd Shift Primary Skills: Engineering Role Description: The Injection Molding Process Technician must have 2+ years of experience. As an Injection Molding Process Technician, you will perform manufacturing support activities for a specific product or group of products. Responsibilities: • Follow procedures and protocols for addressing press alarms, production priorities, and test runs., • Complete production test runs including summarizing the results, completing the workstream in our MRP system, and communicating with all stakeholders., • Ability to transfer processes from one machine to another, also validating the process on the new machine; requires the creation of a new setup sheet and appropriate storage and filing of those documents., • Collaborate with process, tooling, quality, maintenance, and production to identify and solve problems., • Document all process changes on the “process change log worksheet”., • Follow standardized communication processes and expectations. Requires verbal, written, and formal communications to peers, operations, and vendors., • Work from a predetermined priority schedule subject to change to start or stop a molding machine including a complete shutdown to prepare the press for mold changes., • Provide support to molding and the quality team on all corrective actions., • Support the molding floor to ensure molds are running at an established process within the defined parameters., • Keeping a clean work environment including the molding floor., • Setup and improvement of part containment at the molding machine., • Work collaboratively with the molding department to implement and maintain a clean/safe molding floor., • Camera setup and installation as requested by Operations and Engineering., • Setup and tuning of Sprue Pickers and Robots. Yushin Sprue Pickers and Robots., • All other duties as assigned. Requirements: What we'd like you to have: • 2+ years of experience as a Process Technician in an injection molding environment. This position requires continued education; specifically, the American Injection Molding Institute (AIM) molding I and II. Company to pay for course work and travel. Education: High School/Bachelor’s degree in Computer Science, Electrical/Electronic Engineering, Information Technology or another related field or Equivalent Experience: Minimum 2+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job DescriptionAbout Us Concord isn't your typical consulting firm; we are an execution company with a passion for making things happen. Our mission is to help clients enhance customer experiences, optimize operations, and revolutionize their product offerings through seamless integration, optimization, and activation of technology and data. We are purpose-built, merging the industry’s top specialty companies to amplify our Innovation Capabilities in analytics & AI, data management & engineering, UX and digital experience, and technical platform integration, automation & security engineering. About the Role We’re seeking a Creative Strategist to join Concord as a consultant, supporting one of our key retail and beauty clients. In this role, you will bridge the gap between business goals and creative execution—translating insights into customer-first experiences that drive loyalty, personalization, and engagement. You’ll collaborate with cross-functional teams to shape impactful campaigns across web, app, and loyalty touchpoints, staying ahead of retail and beauty trends to inspire innovative strategies. Key Responsibilities • Partner with client stakeholders to align creative strategies with business objectives., • Develop customer-centric concepts that enhance loyalty, personalization, and digital engagement., • Translate insights and research into campaign frameworks, messaging strategies, and creative direction., • Collaborate closely with design, UX, and marketing teams to bring strategies to life across channels., • Stay current on retail, beauty, and digital trends to provide forward-looking strategic recommendations., • Guide digital storytelling that connects with diverse customer audiences across web, mobile, and loyalty platforms. Requirements • 7-10 years of experience in creative, strategy, or related roles, with a proven ability to drive innovative, customer-focused campaigns., • Strong ability to analyze data, research, and trends to uncover actionable insights., • Proven experience shaping omnichannel campaigns (web, app, social, loyalty, in-store)., • Understanding of personalization strategies and customer loyalty programs., • Ability to develop messaging frameworks and guide the creation of compelling content., • Demonstrated skill in connecting business objectives with creative solutions that deliver measurable outcomes., • Experience in retail or digital consumer industries., • Familiarity with customer engagement platforms and tools., • Strategic mindset with a creative edge, able to balance storytelling with data-driven decision making., • Excellent cross-functional collaboration and communication skills. What We Offer (W2 Employment) • Health, Dental, and Vision Insurance: Comprehensive coverage to support your well-being., • Employer Contributions to Health Savings Accounts (HSA): Helping you save for medical expenses., • Flexible Spending Accounts (FSA): Options for healthcare and dependent care expenses, plus a $200 Lifestyle Spending Account (LSA)., • Disability Insurance: Short- and long-term coverage, fully paid by the employer., • Life and AD&D Insurance: Employer-provided coverage, with options for additional voluntary coverage., • Employee Assistance Program (EAP): Access to personal and professional support resources., • Career Growth Opportunities: Pathways for advancement and skill development., • Duration: 3-6 months contract with the possibility of extensions depending on business needs and performance., • Type of employment: C2C or W2 hourly., • Rate: $55- $70/hr., • Location: Hybrid in Dallas-Fort Worth. 2 days on-site., • Requirements: Must be legally authorized to work in the United States without company sponsorship, now or in the future. More than just a consulting firm, Concord is an execution company helping clients enhance customer experience, optimize operations, and differentiate product offerings. From digital transformation and legacy modernization to domain-driven design, we deliver real solutions for the problems our clients face. Join one of the fastest growing consulting firms in the Midwest! Our core capabilities work together to help companies untangle their toughest business and technology challenges: Business Strategy & Alignment, Digital & User Experience, Cloud Applications & Integration, Data Solutions & Analytics, Quality Engineering, and Information Security. Powered by JazzHR dury3frYTG

Job Description Description: Temp to Hire 2nd Shift 3:30pm- 12:00AM (Mon-Fri) Pay range: $28/hr + (Depending on experience) CNC Machinist Technician - Lathe (Mill Exp a plus) 5 or more years of experience Position Summary: Sets up and operates CNC lathes/mills on all product parts with proven and unproven programs. Produces machined fittings per blueprint specifications and work instructions. Perform routine preventative maintenance on equipment. Contributes to lean initiatives to increase productivity and reduce costs. Works independently with minimum guidance in a team environment. Primary Responsibilities/Essential Functions: • Runs multiple machines efficiently, which may require simultaneous operations. Adapts or improvises tooling to accomplish results where operations require a broad knowledge of production machining technology, operating skills, and shop techniques together with diversified experience., • Creates standard machining programs using I.G.F Software. Proves out and edits programs., • Sets ups, adjusts, and operates a variety of conventional and/CNC lathes/mills to perform the most diversified and difficult production operations on work having close and exact tolerances, several dimensional relationships, unusual contours, dimensional and finish requirements., • Interprets customer requirements from blueprints, complex drawings, engineering specifications, quality directives, charts, tables, sketches, and verbal instructions., • Interfaces with engineering to resolve drawing errors, suggest design changes, and solve product/process problems., • Implements manufacturing methods using standard production machines, materials, and tooling. May advise and assist with tooling design., • Makes complex setups, which may include multiple work piece stations, utilizing custom and standard holding devices., • Develops and defines processes with limited documentation, as required., • Trouble shoots and resolves machining problems., • Responsible for machining and checking parts to maintain a high level of quality and efficiency., • Inspects finished parts for conformance to specifications by visual examination, and utilizes precision measuring instruments such as gages, calipers, micrometers, comparators, and surface plate techniques. May be required to use coordinate measuring machine (CMM). Ensures equipment is calibrated in accordance with schedule., • Routinely maintains equipment to ensure cleanliness, accuracy, and reliability specific to division requirements., • Accurately and regularly performs statistical process control (SPC) specific to division requirements., • Uses advanced shop mathematics, which may include trigonometry, and general knowledge of metal characteristics and other processing requirements., • Actively contributes to lean/continuous initiatives by identifying and providing suggestions on areas for improvement. Effectively applies lean concepts and tools in work areas., • Provides guidance or assistance in coordinating workload priorities to make appropriate accommodations based on business demand., • Maintains a satisfactory high level of performance while following appropriate procedures and observing all pertinent safety rules and requirements, • Maintains appropriate knowledge and ability levels to efficiently perform all assigned work and utilizes this knowledge base to become proficient on new/unfamiliar assignments, • Observes all company policies and procedures, including safety rules, and maintains a clean and orderly work area. Qualifications (relevant experience, education and training): • Requires High School Diploma or equivalent and five or more years related machining experience in a high technology manufacturing environment. Able to work with minimum supervisory guidance in a team environment., • Able to set up and run a minimum of five CNC machine types., • Handles multiple tasks with changing priorities to meet customer needs., • May require specialized certification specific to division requirements (i.e. certified operator)., • Reads, understands, and follows blueprints, complex drawings, engineering specifications, and informal written or verbal instructions., • Able to make and evaluate precision machine set ups on a minimum of five CNC machine types., • Has working knowledge of advanced shop mathematics, may include trigonometry., • Able to implement lean/continuous improvement initiatives., • Must be able to read and understand written and verbal instructions, procedures, drawings and blueprints., • Demonstrates effective verbal, written, and interpersonal communication skills, as well as the ability to work in a team environment on research and solution development., • Possesses effective mentoring and training skills and ability to serve as a resource to other team members.

Job Description JOB RESPONSIBILITIES • Design and develop test strategies, plans, and procedures for PCBA testing to ensure compliance with specifications and industry standards., • Set up, program, and operate Automated Test Equipment (ATE) for in-circuit testing (ICT) and functional testing (FCT) of PCBAs., • Identify, diagnose, and resolve failures or malfunctions in PCBAs, and suggest design improvements for manufacturability and reliability., • Perform functional and performance testing of electronic circuits and components to ensure they meet design requirements and regulatory standards., • Design, build, and maintain test fixtures and jigs for both functional and in-circuit testing to improve test efficiency and repeatability., • Create detailed test plans, test scripts, and test reports, documenting all testing activities, defects, and findings in a clear and concise manner., • Work closely with production, engineering, and design teams to continuously improve testing processes, identify root causes of failures, and recommend corrective actions., • Develop and implement automated test procedures using LabVIEW, TestStand, or similar software for automated testing solutions., • Ensure all PCBAs comply with industry standards such as IPC-610, ISO 9001, and any specific client or regulatory requirements., • Analyze test data, generate test reports, and provide feedback to engineering and manufacturing teams regarding product performance and quality metrics., • Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field., • 3-5 years of experience in PCBA testing within an electronics manufacturing environment., • Experience with in-circuit testing (ICT), functional testing (FCT), and automated test systems., • Proficient in operating and programming Automated Test Equipment (ATE) like Keysight, Teradyne, or GenRad., • Strong knowledge of PCB layout, schematic analysis, and electronic circuit theory., • Hands-on experience with oscilloscopes, multimeters, power supplies, and other electronic test and measurement equipment., • Proficient in debugging, troubleshooting, and root cause analysis of PCBAs., • Familiarity with LabVIEW, TestStand, or similar test automation software., • Experience with SMT (Surface-Mount Technology) and THT (Through-Hole Technology) inspection and testing processes., • Strong knowledge of IPC-610 standards for electronic assemblies.

Job Description Who we are Pattison ID - We design, build and maintain physical spaces and facilities for brands that want to use their physical spaces to drive value and impact for customers. We are one of the largest companies in our space, with 8 manufacturing facilities, 5 sales and operations offices and over 1,000 employees in the US and Canada. Benefits 11 paid holidays Paid Time Off Comprehensive health, dental and vision benefits 401K Matching Paid training Great company culture KEY RESPONSIBILITIES: • Match job file program with material required for job, • Load material on machine, • Ensure correct tooling is in place for the job., • Execute job file program., • Monitor machine performance to ensure program is executing properly., • Be alert for broken tool or errant tool path., • Unload and deburr completed parts. QUALIFICATIONS REQUIRED: • Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance., • Mathematics — Knowledge of arithmetic, • Design — Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models., • Engineering and Technology — Be able to apply principles, techniques, procedures, and equipment to the design and production of various goods and services. EXPERIENCE REQUIRED: • Candidates with large format digital print experience are highly encouraged to apply., • Vocational school or 1-3 years of related exp preferred. COMPETENCIES REQUIRED: • Must be able to quality inspect, deburr, and label all parts as needed., • Must be able to maintain and clean machinery as needed daily., • Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures., • Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments., • Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences., • Transfer commands from servers to computer numerical control (CNC) modules, using computer network links., • Check to ensure that workpieces are properly lubricated and cooled during machine operation. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is constantly required to sit and use hands to operate the telephone, type and operate computer and mouse. • The employee is frequently required to talk, hear, and bend and twist neck., • The employee may occasionally lift and/or move up to 10 pounds and rarely lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision and distance vision.

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management. Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia’s Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description The SDI Service Technician-III will install and service water purification systems at customer sites. In this role, you will deliver, set up, exchange, troubleshoot and maintain ion exchange tanks or membrane systems to customers in commercial and industrial applications. Will service and maintain double-pass RO and HERO systems and all pretreatment systems, including performing DI system sanitations. Interfaces with large account customers and provides accurate and timely reports and service recommendations. Key Characteristics (Highlight characteristics required to succeed in the role) ● Initiative ● Customer Focus ● Accountable Duties & Responsibilities ● Drive truck to deliver ion exchange tanks and water treatment equipment to customer site. ● Ensure that correct equipment required for the daily route is loaded, secured and meets quality specs. Load and unload tanks on truck and maintains correct inventory on board truck as required. ● Completes Vehicle Inspection Reports for pre-trip inspection. ● Keep accurate accountability of inventory at each site and make changes as needed. Communicates changes thru the proper channels and follows up to ensure that changes have been made. ● Takes water samples and conducts the following tests including but not limited to TDS, resistivity, pH, CO2, Cl2, and hardness. Accurately record results and make suggestions or changes as required. ● Performs, operates, maintains and completes calibrations on all industrial, commercial, analytical instrumentation. The job description is not designed to capture all the employee’s responsibilities but is intended to capture essential functions of the role. Responsibilities may change over time and may be assigned at any time. ● Rinses ion exchange tanks and membrane systems to customer specifications at sites and ensures quality specifications are met. ● Performs membrane exchanges, system diagnostics, troubleshoots commercial type RO systems. ● Performs both dry and wet ion exchange tank exchanges. ● Performs maintenance and repairs on equipment to include plumbing, electrical/electronic diagnosis, pumps and motors, and tank level controls. ● Can perform system sanitations. ● Operates, maintains, performs diagnostics on all industrial type of RO systems, including but not limited to membrane exchanges, internal and external profiling, instrument replacement, pretreatment maintenance, chemical metering pum, electrical, relay, I/O A/B. ● PVC repair, electrical/electronic diagnosis, and pump and motor repairs or replacement. ● Maintains good housekeeping at all times, which includes the vehicles and customer sites. ● Follows GE and customer EHS policies and rules. ● Maintains contact with customer on site, communicating effectively, politely, and responding to their needs. Maintains good customer relationships. Handles customer issues and inquires. ● Assist with equipment or product delivery outside normal scope when needed due to business levels. ● Trains other employees on duties and responsibilities. ● May be required to be on call during non-business hours. ● Maintains and safeguards company assets (plant, fleet, equipment and inventory). ● Acts as back up to Lead Service Technician. Qualifications Required: ● HS Diploma, GED or equivalent. ● Minimum of 4 years’ water industry experience in ion exchange, water treatment, reverse osmosis or membranes and related equipment or in applicable fields such as electrical, industrial, mechanical, maintenance or plumbing. ● Possess a valid driver's license and clean driving record history ● Ability and willingness to handle repetitive weight - 50 lbs ● Ability to use hand truck and pallet jacks to move heavier loads ● Ability and willingness to work in all weather conditions ● Ability and willingness to: read, and interpret technical manuals, procedures, and regulations; to write reports; to subtract, multiply, and divide in all units of measure ● Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities ● Associate’s Degree in electrical, industrial / mechanical, engineering, or water treatment disciplines ● Forklift certification/experience or ability to obtain forklift certification. ● Knowledge of commercial and industrial membrane systems and UV systems. ● Vocational training in applicable fields such as electrical, industrial/mechanical maintenance, water treatment, plumbing ● Class A License preferred ● Knowledge of PLC logic/programing. ● Knowledge of ion exchange and membrane theory and operation, as well as pretreatment applications. ● College coursework in chemistry ● Experience driving company vehicles such as panel vans or service trucks ● Forklift certification/experience or ability to obtain forklift certification. Additional Information ● Ability & willingness to handle repetitive weight - 50 lbs ● Ability & willingness to work in all weather conditions ● Ability & willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, & power industry facilities As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The E-Space Manufacturing Solar Team builds the world's most advanced aerospace products. We are seeking a skilled and detail-oriented Thin Film Solar Sputter operator/technician to support the manufacturing of flexible thin film photovoltaic modules. This hands-on role focuses on operating, monitoring, and optimizing manufacturing and roll-to-roll (R2R) processing equipment used in the deposition and fabrication of thin-film solar layers. The ideal candidate has a strong background in web handling, process control, and thin-film sputter deposition in a cleanroom or high-tech manufacturing environment. What you'll be doing: • Operate and maintain roll-to-roll vacuum deposition and sputter coating systems used for thin-film production., • Monitor process parameters and equipment performance to ensure optimal web tension, alignment, film uniformity, film thickness, and composition., • Perform routine inspections and preventive maintenance on web-handling and deposition equipment., • Work with the team to optimize and develop new processes., • Support process development, troubleshooting, and continuous improvement efforts in collaboration with engineering and R&D teams., • Handle substrates and materials (e.g., substrates, targets) with care and precision in accordance with SOPs (instructions)., • Document operational steps, process deviations, and maintenance activities in production logs and reports. What you will bring to this role:, • Associate’s degree in engineering technology, Materials Science, or a related technical field, or equivalent hands-on experience in a manufacturing environment., • Minimum 2 years of experience with roll-to-roll or web-based processing equipment., • Strong understanding of web dynamics including tension control, tracking, splicing, and substrate handling., • Familiarity with magnetron sputter deposition techniques for thin films., • Expertise in vacuum, mechanical, pneumatic, and electrical systems on production tools. Extra points for the following:, • Experience specifically with thin-film photovoltaic materials (CIGS, CdTe, a-Si, OPV, perovskites)., • Knowledge of process control systems (SCADA, PLC) and data logging tools. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Description Have you ever wondered what it would be like to work with one of the BEST in government contracting? Ranked by Forbes in 2018 as a Top government contractor and one of the World's Most Ethical Companies, Team Leidos is one you don't want to overlook. Everything we do is built on commitment to do the right thing for our customers, our employees and our community. We embrace and solve some of the world’s toughest challenges. We're focused on ensuring our customers have the right tools, technologies and tactics to keep pace with an ever-evolving world landscape. We know once you join Team Leidos, you are sure to go home at the end of each day knowing YOU MADE A DIFFERENCE, resulting in one of the most REWARDING careers you could have imagined. We Want You! The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electronics Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in Ft Worth, TX. The ideal candidate will support the daily operations of the FAA’s Legacy Infrastructure to Future Technologies (LIFT) Portfolio and the goal of converting National Airspace Connectivity from TDM to IP. The scope includes Telecommunications Infrastructure Replacement, Small Tower Voice Switches, Air to Ground Protocol Converters and NEXCOM Radios. Job Duties Include: • Evaluate existing site surveys to develop scope of work for site preparation requirements, • Conduct site surveys at remote sites for LIFT site preparation requirements, • Draft site preparation scope of work for facilities based on site survey reports and facility data, • Identify LIFT contract CLINs required to complete site preparation, • Develop cost estimates for site preparation, • Review contractor site prep proposals for accuracy and compliance with scope of work, • Generate ORM PRP’s for site preparation and installation of LIFT equipment, • Work with SSC/TSC/AT to implement risk mitigations for LIFT implementation, • Coordinate and scheduled site preparation activities with SSC/TSC/AT/LIFT personnel, • Oversee site prep and installation work performed by LIFT contractor, • Generate periodic status reports, • Update Corporate Work Plan (CWP) data, • Update facility drawings (red lines) for drafting Basic Qualifications: • Electronics Engineering Degree (B.S.) with a minimum of 4 years’ experience., • Ability to travel 25%-50%., • Ability to obtain a Public Trust Suitability. (To be eligible for the FAA Public Trust you must be a US Citizen or a Green Card Holder who has resided in the US for the past 3 years)., • Proficiency in MS Office Suites., • Proficient working with AutoCAD or similar tools Desired Qualifications: • Knowledge of National Electric Code (NEC), National Fire Protection Assoc (NFPA) standards, National Airspace System Equipment Tower, • Knowledge of OSHA and general construction and electrical safety standards., • Knowledge of NAS facilities such as ASR, ATCT, VOR, ARSR, RCAG., • (NASET), National Airspace System Equipment Building (NASEB)., • Knowledge of Corporate Work Plan (CWP) 4.1.12 If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. September 8, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $85,150.00 - $153,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description Have you ever wondered what it would be like to work with one of the BEST in government contracting? Ranked by Forbes as a Top government contractor and one of the World's Most Ethical Companies, Team Leidos is one you don't want to overlook. Everything we do is built on commitment to do the right thing for our customers, our employees and our community. We embrace and solve some of the world’s toughest challenges. We're focused on ensuring our customers have the right tools, technologies and tactics to keep pace with an ever-evolving world landscape. We know once you join Team Leidos, you are sure to go home at the end of each day knowing YOU MADE A DIFFERENCE, resulting in one of the most REWARDING careers you could have imagined. We Want You! The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electrical Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in Des Plaines, IL. The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electronics Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in Fort Worth, TX The ideal candidate will support the daily operations of the FAA’s Terminal Group. Duties include but are not limited to: • Plan and design electrical systems for a variety of FAA buildings and structures., • Perform on-site surveys to develop “to-scale” designs and detailed reports., • Test and analyze power systems and participate in construction inspections and final inspections inclusive of CAI and JAI., • Confer with engineering staff and other personnel to identify and resolve problems with the design or implementation., • Coordinate design components with a multi-disciplinary team and generate drawings, wiring diagrams, and wiring schematics as required for site-specific modifications and new construction., • Prepare construction drawings and prepare site-specific specifications and contract documents and independent cost estimates., • Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans)., • Generate and coordinate the Integrated Risk Management Checklists (IRMC), communication plans, project risk register, to meet Operational Risk Management (ORM) requirements., • Coordinate and complete Work Permits required for potential impact to lead and asbestos that may be encountered during construction., • Participate in meetings inclusive of the pre-construction meeting and on-site construction meetings with stakeholders to coordinate electrical systems with other ongoing construction and projects., • Plan, schedule, and coordinate construction project activities to meet milestones and deadlines; working directly with stakeholders and contractors., • Manage and participate in on-site cutovers, testing and restoration of facilities., • Prepare, maintain, and provide periodic updates of project to team, management, and stakeholders., • Manage multiple projects towards successful on-time completion., • Review contractor design and construction submittals., • Perform internal design reviews of FAA designed power projects., • Effectively communicate in written and verbal form., • Accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stakeholders, peers and management levels. Basic Qualifications: • Must have a Bachelor’s Degree in Electrical Engineering or Power related degree from an accredited College/University and a minimum of 6 years of prior relevant experience or Masters with minimum of 5 years of relevant experience, • Exceptional written and verbal communication skills., • Proven ability to produce clear, concise general and technical documentation, and to collaborate effectively with diverse stakeholders, team members, and all levels of management., • Extensive experience in the design of 120/208V and 480V electrical systems, including additions, modifications, and new construction projects., • Extensive understanding and experience with the National Electric Code for modifications and new builds., • Knowledgeable of electrical trade installation methods, techniques, and hardware for use in designing construction drawings., • Experience designing electrical circuits and breakers for pumps, motors, air handlers, and other mechanical systems, • Experience designing and modifying electrical distribution for commercial, industrial and/or government facilities, including standby engine generator and un-interruptible power systems (UPS)., • Experience performing Load Calculations., • Must be proficient with Microsoft Office Suite and able to organize documentation and have an awareness of general documentation systems., • Strong experience with AUTOCAD., • Ability to obtain Public Trust Clearance., • Ability to travel up to 50% of the time. Desired Qualifications: • Experience supporting the Federal Aviation Administration, • Experience with power system analysis software such as EDSA Power Analytics and SKM Systems Analysis Power Tools., • Experienced in conducting and interpreting arc flash studies. At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. October 28, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $85,150.00 - $153,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Descrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job DescriptionControl Room Support Operator | $19/hour | Day Shift 2-2-3 6am-6:15pmWhat Matters Most • Competitive Pay of $19 per hour, • Schedule: Days, 2-2-3, 6am-6:15pm, • Location: Fort Worth, TX, • Direct Hire opportunity Job DescriptionAs a Control Room Support Operator, you will play a vital role in ensuring the efficient operation of coffee roasting processes. You will be responsible for monitoring and controlling large-scale roasters, managing quality assurance checks, and maintaining safety and sanitation standards. This role requires keen attention to detail, independent work ethic, and the ability to follow protocols precisely to prevent financial loss. Responsibilities:, • Monitor and control coffee roasting operations from the control room., • Conduct quality assurance checks, including color, moisture, density, and grind analysis., • Perform and document all HACCP checks to ensure compliance., • Assist in scheduling green bean receiving, roasting, and grinding operations., • Manage bin capacities to optimize production efficiency., • Perform sanitation, housekeeping, rework, and preventive maintenance tasks., • Assist in thermal cleaning of the roaster, pelletizer maintenance, and dust collection system cleaning., • Participate in changeovers and document film usage, rejected materials, and rework., • Communicate control room issues with the Control Room Operator and other departments as needed., • Verify case counts at the completion of production runs., • Make minor repairs and adjustments to equipment as required. Qualifications and Requirements:, • Food manufacturing experience preferred., • Basic computer operation skills., • Strong attention to detail and ability to work independently., • Quality assurance experience is a plus., • Ability to follow strict protocols to prevent production loss.

Job DescriptionDescription: About Early Care and Education Early Care and Education is a locally owned and operated, nationally accredited preschool program dedicated to raising the bar in early childhood education. Our mission is to create a preschool and after-school program that exceeds state and national standards while allowing children to thrive, explore, and learn through play. We prepare children not only to excel academically but also to develop a lifelong love of learning. Join Our School Family We are looking for enthusiastic and caring part-time teachers to be positive role models for our elementary-aged children in our after-school program, STEM Station. Our Mission STEM Station’s mission is to enrich your child’s educational journey through exciting, hands-on activities in science, technology, engineering, art, and math (STEAM). We aim to create a relaxed and enjoyable environment where children can explore their interests, develop new skills, and grow both academically and personally. Why Join Us? We value our teachers and offer: • Competitive wages based on experience and education, • Vision, dental, and health benefits for full-time employees, • 401(k) matching, • Discounted child care tuition, • Paid time off for full-time employees, • Holiday pay for full-time employees, • Multiple bonus and incentive opportunities, • CDA achievement assistance, • Career advancement opportunities What We’re Looking For • Minimum of a high school diploma or equivalent, • Valid Texas driver’s license and willingness to drive a mini bus (after-school teachers only), • Experience working with young children, • Ability to bend, stoop, and run to keep up with active young children, • Strong communication and interaction skills with children and parents, • Compassion, respect, and patience for young children Teacher Responsibilities • Maintain a safe, healthy, and nurturing classroom environment, • Implement a developmentally appropriate curriculum that promotes social, emotional, physical, and cognitive growth, • Document attendance records, food program compliance, developmental milestones, accident reports, and daily communication with parents, • Use positive guidance techniques through the implementation of Conscious Discipline, • Collaborate respectfully and professionally with other team members to ensure the success of the children and the school family Requirements: Schedule Monday to Friday, part-time. Shifts may include: • 2:30 PM to 6:30 PM Requirements • Education: High school diploma or equivalent (Required), • License/Certification: Valid Texas driver’s license (Required)

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Quality Control Technician 3rd shift for our client in the Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Fort Worth, TX Salary: $54,000/Annually Role: Quality Control Technician (3rd shift) Primary Skills: Engineering Role Description: The Quality Control Technician must have 3+ years of experience. The Quality Control Technician is responsible for incoming inspection of molded and purchased parts to ensure conformity to company engineering and quality standards. Primary focus will be completing inspections in an expedited manner in support of the manufacturing process. This position may also require that the product is promptly and accurately put into the warehouse after passing incoming inspection and QA audit. Secondary focus may include first article inspections (FAI) on purchased metal and plastic components. Essential Duties and Responsibilities (other duties as assigned): • Conduct inspections as per documented instructions using MicroVu vision system, calipers, micrometers, or other devices., • Examines material or product for surface defects such as cracks, pits, and short shots., • Measures and electronically record dimensional data to ensure part compliance with part print., • Compares product with written standards such as print specifications to ensure conformance with product requirements., • Communicates status of part examination to the Tooling, Molding, and Quality teams., • Generate quality advisement documentation and provide reports to QA Engineers or Supervisor., • Generate emails to report findings and follow up with disposition of stock., • Work with warehouse personnel to place components into stock after QA approval., • Complete calibration and maintenance of inspection equipment., • Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag., • Assists in investigation of defective parts using written standards and data collected from the molding process to determine the root cause of the defect., • Provide support to assembly, molding, kitting, warehouse, or other departments when needed., • Perform other duties as assigned by immediate supervisor (written or verbal). Requirements Education and Skill Requirements: • One-year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience., • Associate’s degree in engineering or science preferred., • Ability to read and understand detailed parts and assembly prints., • Proficient in Microsoft Office, specifically Excel and Outlook., • Good communication skills and follow-through on assigned tasks., • MicroVu or other measurement equipment experience preferred. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 plus pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Education: High School Experience: Minimum 3+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Quality Assurance Laboratory Technician will ensure process and product quality standards are being achieved through chemical and physical analytical techniques. This is a rare opportunity to have an early role in implementing manufacturing test methods for a greenfield advanced manufacturing facility that is helping to define the future of American manufacturing. The ideal candidate will be a hands-on technician with experience in a complex 24/7 industrial operation. The position will report to a QA/QC Manager. Position Responsibilities: • Operate laboratory analytical equipment including some combination of ICP, LECO, XRF, XRD, SEM, optical microscopes, dimensional analysis and magnetometry., • Review and record analytical results in LIMS/database., • Support testing method development, assessment, validation, and roll-out under guidance of the Technology team., • Maintain and troubleshoot laboratory instrumentation., • Assist in tracking and maintaining the chemical inventory., • Perform lab housekeeping and routine inspections., • Perform routine statistical analysis (SQC) on quality data., • Participate in Gage R&R and other measurement system assessments., • Actively participate in Kaizen events, safety programs, and adhere to all appropriate laboratory safety and operations procedures., • Maintain safe work practices., • Aptitude and experience with chemical testing techniques and instrumentation., • Certificate or Associate Degree in chemistry, chemical engineering, materials science, or other relevant science or engineering field., • Availability to rotate shifts to accommodate our 24/7 manufacturing operations., • Familiarity with computers, data entry, and analysis., • As least 1 year of lab experience. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Business Development Specialist – Managed Service Provider (MSP) A newly created role with a fast-growing, niche-focused Managed Service Provider based in Dallas. Reporting directly to the C-Level this is a high-impact individual contributor position designed for someone who thrives on expanding client bases, driving new business, and scaling service offerings What You’ll Do: • Act as a growth catalyst by identifying, engaging, and converting new Managed Service Provider Business clients., • Generate leads through cold outreach, networking, and digital campaigns., • Close Deals: Pitch, Present, Answer-Overcome objections, Demonstrate-Explain, Re-Assure, Build Rapport, negotiate terms, and Close new business clients., • Own the sales cycle from prospecting to closing, including onboarding and discovery., • Collaborate cross-functionally to enhance service offerings and support strategic expansion., • Leverage modern tools (SEO, digital marketing, AI, CRM platforms) to optimize outreach., • Present metrics-driven insights including KPIs, forecasts, and client growth reports., • Recent experience at a small or mid-sized MSP where you directly contributed to client growth., • Proven success in selling and expanding MSP services—you’ve brought in new business before., • Passion for sales, marketing, and client engagement with a strong work ethic., • Excellent written and verbal communication skills; charismatic and persuasive., • Familiarity with client onboarding, lead qualification, and discovery processes., • Comfort with tech-sales tools and digital marketing platforms., • Exposure to MSPs serving industrial sectors like manufacturing, oil/gas, building services, facilities or logistics., • Sales-Side Knowledge of (or experience with) MicroSoft and Cisco LAN/WAN and Security Technologies., • A strong local/Dallas area professional network— contacts, clients, or industry groups you can tap into., • Experience testing and launching new MSP service offerings. Very Competitive Salary, Commission and Benefits! (note salary listed does not include uncapped commission, salary will flex depending on commission plan) Company DescriptionTexas Based Managed Services (I.T./Technology Services) Provider to an Underserved Niche Industry type of Business Customer; Company Founder saw an untapped market and a serious need; Experiencing Significant Growth of the past 7+ years. Terrific Newly Created Roles (Opportunities) due to demand.Texas Based Managed Services (I.T./Technology Services) Provider to an Underserved Niche Industry type of Business Customer; Company Founder saw an untapped market and a serious need; Experiencing Significant Growth of the past 7+ years. Terrific Newly Created Roles (Opportunities) due to demand.