Trabajos tig welder en Houston, TexasCrear alertas

Job DescriptionDescription: About Piping Technology & Products (PT&P) PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently. Position Summary The Structural Welder is responsible for fitting, aligning, and welding structural components used in the fabrication of supports, frames, and assemblies for piping systems and industrial applications. This position requires the ability to interpret blueprints and welding symbols, perform quality welds in accordance with codes and company standards, and maintain a high level of safety and craftsmanship in all tasks. Requirements: • Read and interpret blueprints, drawings, and welding symbols to determine material requirements and welding procedures., • Set up and operate welding equipment to join structural components, • Position, align, and fit structural parts prior to welding, using clamps, squares, and measuring tools., • Inspect welds visually and dimensionally to ensure conformance with specifications and quality standards., • Repair or rework defective welds as needed., • Maintain welding equipment and ensure tools are in safe working condition., • Follow safety procedures for working with compressed gases, hot materials, and heavy equipment., • Collaborate with fitters, fabricators, and supervisors to ensure project deadlines and quality goals are met., • Maintain a clean and organized work area and adhere to 5S and housekeeping standards. Qualifications • High school diploma or GED required, • Must pass company-administered welding tests, • Proficient in MIG, Flux Core, or Stick welding; TIG experience a plus., • Familiarity with welding carbon steel and stainless-steel materials., • Strong attention to detail, safety awareness, and teamwork., • Ability to read, write, and interpret fabrication drawings, understand work instructions, safety procedures, and production documentation in English required., • Basic understanding of welding processes, • Strong attention to detail and organizational skills., • Ability to work in a fast-paced, team-oriented environment Physical Requirements • Must be able to stand for prolonged periods (8+ hours), • Must be able to lift, push, pull, or carry up to 50 lbs. independently, • Frequent bending, stooping, reaching, and manual handling of materials required, • Good hand-eye coordination and manual dexterity, • Ability to tolerate noise, heat, and dust in a manufacturing environment, • Visual acuity to read measuring tools, drawings, and detect quality defects, • Must pass initial and ongoing physical or occupational health screenings (e.g., lifting assessment, vision test, hearing test, etc.), • Must be able to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection Work Environment Manufacturing floor with exposure to moving mechanical parts, sharp materials, and moderate to loud noise. May be exposed to hot or cold environments depending on season. Work schedule may include overtime or weekend shifts as needed.

Job Description TIG Welder - Night - Starting $28/hour Piping Technology & Products Inc. Houston, TX, US Bellows Description TIG Welder – Night Shift US Bellows | A Division of Piping Technology & Products, Inc. Houston, TX About Piping Technology & Products (PT&P) Piping Technology & Products, Inc. (PT&P) is a trusted leader in the design and manufacturing of engineered products for piping systems. Serving industries such as oil & gas, power generation, and chemical processing since 1978, PT&P is headquartered in Houston, Texas and is known for innovation, quality craftsmanship, and a strong commitment to customer satisfaction. US Bellows, a PT&P division, specializes in metallic expansion joints and related piping components. Join our team and help support critical infrastructure across the globe. Position Summary The TIG Welder (Night Shift) is responsible for welding fabricated metal components and assemblies in accordance with engineering drawings, welding procedures, and quality standards. This position plays a critical role in producing high-quality expansion joints and related piping products while maintaining safety, accuracy, and efficiency during night shift operations. Must have 3 years TIG experience and must pass TIG 3G Testing. Key Responsibilities · Perform TIG welding on carbon steel, stainless steel, and alloy materials · Must be able to weld plate to plate (very thin) and plate to flat bar · Read and interpret blueprints, drawings, weld symbols, and specifications · Set up and operate welding equipment according to approved Welding Procedure Specifications (WPS) · Ensure welds meet dimensional, visual, and quality requirements · Conduct in-process inspections and make adjustments as needed · Use fabrication tools such as grinders, torches, and hand tools · Safely operate overhead cranes and material-handling equipment · Maintain clean, organized, and safe work areas · Complete required documentation, travelers, checklists, and work orders · Follow all safety procedures, including PPE requirements, LOTO, and crane protocols Requirements Qualifications · A minimum 3 Years’ Experience Preferred · Proven experience with TIG welding in a manufacturing or fabrication environment · Ability to read and interpret welding symbols and fabrication drawings · Familiarity with welding carbon steel and stainless-steel components · Strong attention to detail and commitment to quality · Ability to work independently on night shift · Knowledge of shop safety standards and procedures Work Schedule Night Shift (hours determined by production schedule) \nCompany Description PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently PT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently

Job DescriptionDescription:TIG Welder – Night Shift US Bellows | A Division of Piping Technology & Products, Inc. Houston, TX About Piping Technology & Products (PT&P) Piping Technology & Products, Inc. (PT&P) is a trusted leader in the design and manufacturing of engineered products for piping systems. Serving industries such as oil & gas, power generation, and chemical processing since 1978, PT&P is headquartered in Houston, Texas and is known for innovation, quality craftsmanship, and a strong commitment to customer satisfaction. US Bellows, a PT&P division, specializes in metallic expansion joints and related piping components. Join our team and help support critical infrastructure across the globe. Position Summary The TIG Welder (Night Shift) is responsible for welding fabricated metal components and assemblies in accordance with engineering drawings, welding procedures, and quality standards. This position plays a critical role in producing high-quality expansion joints and related piping products while maintaining safety, accuracy, and efficiency during night shift operations. Must have 3 years TIG experience and must pass TIG 3G Testing. Key Responsibilities · Perform TIG welding on carbon steel, stainless steel, and alloy materials · Must be able to weld plate to plate (very thin) and plate to flat bar · Read and interpret blueprints, drawings, weld symbols, and specifications · Set up and operate welding equipment according to approved Welding Procedure Specifications (WPS) · Ensure welds meet dimensional, visual, and quality requirements · Conduct in-process inspections and make adjustments as needed · Use fabrication tools such as grinders, torches, and hand tools · Safely operate overhead cranes and material-handling equipment · Maintain clean, organized, and safe work areas · Complete required documentation, travelers, checklists, and work orders · Follow all safety procedures, including PPE requirements, LOTO, and crane protocols Requirements:Qualifications · A minimum 3 Years’ Experience Preferred · Proven experience with TIG welding in a manufacturing or fabrication environment · Ability to read and interpret welding symbols and fabrication drawings · Familiarity with welding carbon steel and stainless-steel components · Strong attention to detail and commitment to quality · Ability to work independently on night shift · Knowledge of shop safety standards and procedures Work Schedule Night Shift (hours determined by production schedule)

Job DescriptionTIG / Combo Pipe Welder Brookshire, TX | Temp-to-Hire DIHO Consulting USA LLC is seeking an experienced TIG / Combo Pipe Welder for a growing industrial manufacturing and pipe fabrication operation specializing in high-quality welded assemblies and advanced production processes. The ideal candidate has strong, recent experience producing clean, consistent TIG root welds on pipe, while also demonstrating the ability to complete the full open-root welding process, including root, hot, fill, and cap passes. Candidates must be comfortable working from approved welding procedures and maintaining production-quality standards in a fabrication environment. Responsibilities • Perform TIG root welding on pipe to production and quality standards., • Complete open-root pipe welds, including root, hot, fill, and cap passes., • Read, interpret, and follow Welding Procedure Specifications (WPS)., • Produce welds with proper penetration, fusion, and consistent root quality., • Verify fit-up conditions and identify unacceptable gaps or high-low conditions., • Perform pipe fabrication welding in accordance with drawings and specifications., • Maintain weld identification and documentation as required., • Support quality, safety, and production objectives.Qualifications, • Minimum 3 years of industrial pipe welding experience., • Proven TIG/GTAW pipe welding experience., • Strong TIG root welding capability with consistent quality and production pace., • Experience completing open-root pipe welds from root through cap., • Stainless steel GTAW/TIG welding experience., • Understanding of fit-up, root gap, penetration, and weld quality requirements., • Ability to read and follow WPS requirements., • Willingness to complete a practical weld test., • Ability to work overtime, including approximately 60 hours per week when required.Preferred, • TIG and MIG combo welding experience., • Fabrication shop or manufacturing experience., • Experience working in quality-controlled production environments., • Familiarity with automated or robotic welding operations.

Job Description SCI exclusively accepts direct applications only. We do not accept unsolicited resumes from recruitment agencies. Please do not contact our hiring managers. The construction pipe welder specializes in stainless steel and duplex piping networks. The welder is responsible for fabricating, fitting, and welding high-pressure piping systems across industrial construction job sites. Position will start as a shop fabrication position at Company’s facility in Houston, TX for 2 months. Position will then transition to the field in Lebanon, Indiana for field weld installations. Responsibilities • Execute high-quality X-ray standard welds on stainless steel (e.g., 304, 316) and duplex/super duplex (e.g., 2205, 2507) piping systems., • Utilizes GTAW (TIG) for root and hot passes, with occasional SMAW (Stick) or FCAW for fill and cap passes depending on the Weld Procedure Specification (WPS)., • Sets up and monitors advanced inert gas backing purges (Argon). Utilizes oxygen analyzers to ensure O2 levels drop below strict client and code requirements (often <25-50 ppm) before initiating the weld., • Reads and interprets isometric blueprints, structural drawings, and P&IDs., • Cuts, bevels, aligns, and tack-welds pipe joints to perfect tolerances., • Monitors and manages strictly regulated interpass temperatures and heat input parameters specific to duplex steel to prevent phase imbalances., • Conducts thorough visual inspections of all beads, root penetration, and final profiles to guarantee zero-defect results ahead of non-destructive testing (NDT)., • Must learn and understand all safety hazards related to the work and safely and effectively use or operate work related tools and equipment., • Strictly adheres to safety protocols and PPE requirements., • Ability to travel. Experience • Minimum of 3-5 years of industrial construction experience focused strictly on alloy pipe welding., • Current OSHA 30 certification required., • Complete fluency in reading welding symbols, blueprint dimensions, and following rigid WPS documents., • Proven track record of handling alloy-specific challenges including walking the cup, managing solidification rates, and treating oxide heat tints., • Possesses deep expertise in GTAW (TIG) processes, precise purging techniques, and metallurgy controls to prevent defects and maintain material integrity in highly corrosive environments. Education/Training • A current relevant quality certification (ISO 9001/ASQ Auditor Certificate or equivalent) preferred., • Must have a comprehensive working knowledge of all ACI, ASME, and API standards and procedures related to the midstream oil and gas industry., • CWI, NACE, API, or equivalent industry certification preferred. Physical Qualifications • Ability to weld in challenging, tight spaces and various positions (flat, vertical, overhead, and at elevated heights up to 75 feet)., • Must be able to push/pull, lift, or carry up to 50 lbs., but may occasionally push/pull, lift, or carry up to 100 lbs., • Subject to repetitive use of hands/arms, and legs., • Hand/eye coordination., • Must be able to communicate (hear, comprehend, and speak) to safely perform work., • Will need to be able to perform sedentary to heavy work., • Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis., • Position may require prolonged bending/twisting, walking, crawling, kneeling, reaching overhead, squatting, pushing /pulling, or standing and lifting., • Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose/soft sand, etc., • Will be exposed to adverse weather conditions (heat, cold, rain, etc.)., • Must have the ability to communicate effectively with management/supervision., • Reading and writing comprehension is necessary for giving and receiving directions to perform work and/or safety policy., • Work at various tempos and concentrate amid distractions., • Decision making skills necessary., • Detail-oriented; must be able to remember, examine, and observe details. Work Environment The job will primarily be on or around construction/turnaround sites in petrochemical operational units and include possible hazardous environments such as confined spaces and working at heights. Exposure to loud noises, dust, dirt, irritants, and smoke may occur. Special Personal Protective Equipment (PPE) may be necessary to control some hazardous environments. Additional forms of PPE may be required depending on the particular project. Safety requirements must be verified and meet standards set forth by client permits, policies, and procedures, and be performed in compliance with all federal, state, and local laws or ordinances before work activities can begin. ALWAYS HAVE SAFETY OF EMPLOYEES AND POSITIVE PROJECT OUTCOME AS TOP PRIORITY. Standard Constructors, Inc. is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job DescriptionWelder IVLocation: Houston, TXPay Rate: $22 - $26 per hour, W2Duration: 12 Month ContractSummary: • The Welder will be required to carry out cladding on machined parts to a high degree of quality., • Work on his/her own initiative to meet the production schedule of the plant., • Ability to weld many different types of components related to Gas and Steam turbine repairs., • This position may be required to flex between first and second shift as needed.Responsibilities:, • Performing visual and in-process inspections in accordance with API and ISO quality specifications., • Reading and understanding engineering drawings & specifications., • Overlay of components using Tig & MiG per weld procedures., • Setting up and welding components within the parameters of the specific weld procedure., • Detailing grinding of components after weld repairs., • Adhering to Company Safety and Environmental policies.Requirements:, • High School Diploma or equivalent diploma., • Minimum 7 years of experience., • Experience of using foot control Tig and MiG machines., • Adhering to Company quality procedures.Preferred Skills:, • Experience with SMAW & GMAW welding procedures., • Experience of manual TIG., • Advanced degree can be substituted for experience.

Job DescriptionThe Welder will be required to carry out cladding on machined parts to a high degree of quality, and work on his/her own initiative to meet the production schedule of the plant. The role will require the ability to weld many different types of components related to Gas and Steam turbine repairs. This position may be required to flex between first and second shift as needed. As a Welder, you will be responsible for: Performing visual and in-process inspections in accordance with API and ISO quality specifications Reading and understanding engineering drawings & specifications. Overlay of components using Tig & MiG per weld procedures. Setting up and welding components within the parameters of the specific weld procedure. Detailing grinding of components after weld repairs Adhering to Company Safety and Environmental policies Qualifications/Requirements Adhering to Company quality procedures. Qualifications High School Diploma or equivalent diploma. 7 year experience Experience of using foot control tig and MiG machines Preference would be to have experience with SMAW & GMAW welding procedures Experience of manual TIG Advanced degree can be substituted for experience

Job DescriptionOlive Recruiting is searching for an experienced welder/fabricator for our specialized transport and heavy lift client in Houston, TX. The ideal candidate will interpret blueprints and technical drawings to plan and execute precise layouts, utilizing specialized welding techniques including TIG, MIG, and plasma cutting, with experience in welding, fabricating, and fitting. Shift: 7:00 am – 4:30 pm M-F Full time, Direct Hire Responsibilities: • Interpret blueprints, drawings, and measurements to plan layouts, • Use specialized welding equipment including TIG, MIG, and Plasma cutters, • Fit, Fabricate and Weld components to tanks, vessels and specialized transport equipment, • Develop custom pieces based on engineering or operational needs such as ramps, connectors, stands, etc, • Adherence to a high level of safety standards, • Weld components in flat, vertical, and overhead positions, • Weld components using manual or semi-automatic welding equipment, • Maintain equipment in a condition that does not compromise safety. Good housekeeping, • Work with Team members to ensure top quality and high standards while welding on steel, aluminum and various materials Qualifications:, • Read blueprints and utilized those to Client out work and build products, • Read and understand measurements, • Layout, fit, and weld parts inside and out per the drawings, • Must have TIG & MIG welding experience. Pulsed MIG is preferred.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, data center, environmental, food & beverage, pulp & paper, material handling, oil & gas, pharmaceutical, renewables, metals, and utility markets. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Fitter Welder. The Fitter Welder owns the complete build of a base — from drawing review and material layout through fit-up, welding, floor plate, and final inspection. This is a dual-skill classification: the employee must be able to read and execute the drawing package as a fitter and produce sound, code-quality welds as a welder. The defining expectation of this role is the ability to take a drawing package and independently produce a finished, inspection-ready base without step-by-step direction. Combination Welder/Fitters are the primary staffing unit for each fabrication line and are expected to identify and correct their own discrepancies before a base is considered complete. Combination Welder/Fitters progress through defined tiers (I–III) based on demonstrated drawing comprehension, layout and fit-up accuracy, weld quality, and independence. Job Duties: Drawing & BOM Identification • Review and understand the drawing package before beginning work., • Identify the Bill of Materials (BOM) and locate all required components., • Identify the steel/material type, size, quantity, and weight, and verify they match the drawing and BOM., • Identify and understand standard weld symbols, weld sizes and dimensions, drawing notes, general dimensions and tolerances, and miscellaneous parts and components shown in the drawing package. Material Layout & Preparation • Verify material before fabrication., • Lay out all required dimensions for lifting lugs, ground pads, holes and drilled locations, and other components identified on the drawing., • Drill holes according to the dimensions and notes provided in the drawing package., • Cut channel and other material as required to match the drawing., • Properly identify and prepare the floor plate. Fit-Up • Position and fit components according to the drawing., • Ensure the assembly is square, level, properly aligned, and within required dimensions., • Tack weld components using appropriate procedures and sequence., • Verify dimensions and alignment before final welding., • Correct fit-up issues before proceeding. Welding • Follow weld symbols, weld sizes, and drawing notes., • Select and use the appropriate welding process and settings for the material and application., • Weld components in the proper sequence to minimize distortion., • Grind welds smooth where required by the drawing or work instructions., • Cut, modify, or prepare material as necessary while maintaining drawing requirements., • Complete all required welds and attachments. Floor Plate • Identify the floor plate on the drawing package., • Verify the floor plate size, quantity, material, and cutouts, when applicable., • Lay out and prepare the floor plate according to drawing dimensions and notes., • Fit and weld the floor plate according to the specified weld symbols. Final Inspection • Inspect the completed base for weld quality and completeness, squareness, level, overall dimensions, component location, hole locations and sizes, floor plate dimensions and cutouts, cleanliness, and proper grinding and finishing., • Confirm compliance with all drawing requirements., • Identify and correct discrepancies before the base is considered complete. General • Operate shears, brake press, torches, plasma cutters, drills, and overhead cranes safely and efficiently., • Document inspection results and complete required quality records., • Maintain clean, organized, and safe work areas aligned with 5S principles., • Communicate proactively with supervisors and cross-functional teams regarding materials, progress, and issues. CORE COMPETENCIES Technical Skills • Drawing package interpretation — views, details, BOM, notes, general dimensions, and tolerances., • Material identification and verification: type, size, grade, quantity, and weight., • Layout and measurement accuracy — squares, levels, tape, chalk line, protractor, and layout tools., • Structural fit-up: squaring, leveling, alignment, and tacking sequence., • Weld symbol interpretation — weld type, size, length, spacing, contour, and field/all-around indicators., • Welding proficiency (MIG required; TIG/flux-core or other processes preferred and used depending on SOW)., • Heat and distortion control and weld sequencing., • Equipment setup and operation (press brake, plasma cutter, shears, drills, torch)., • Dimensional verification, visual weld inspection, and QA documentation. Behavioral Skills • Customer Focused: Prioritizes quality, accuracy, and on-time delivery in every build., • Team Player: Works collaboratively with fabrication, assembly, paint, and integration teams., • Get It Done: Demonstrates urgency and persistence to overcome obstacles and complete tasks safely., • Strive for Excellence: Continuously improves skills, techniques, and outcomes., • Accountability: Owns workmanship, communication, safety, and adherence to standards; corrects discrepancies before hand-off. Safety Competencies • Consistent use of PPE (welding helmet, gloves, sleeves, jacket, face shields, respiratory protection where required)., • Adherence to grinder, hot-work, fire watch, and LOTO procedures., • Safe operation of cranes, hoists, and lifting devices, including proper rigging of lifting lugs., • Safe handling of compressed gas cylinders, torches, and cutting equipment., • Awareness of pinch points, material handling hazards, and load stability during fit-up. Requirements • High school diploma or equivalent., • Ability to independently read and execute a fabrication and weld drawing package., • Ability to lay out, drill, cut, fit, and weld structural components to drawing dimensions and tolerances., • Ability to use measurement, layout, and inspection tools., • Physical ability to lift up to 50 lbs, stand for extended periods, and work in bent, kneeling, or overhead positions., • Combination Welder/Fitter I: 1–2 years of combined fitting and welding experience, or demonstrated welding experience plus completion of Panelmatic fitting training., • Combination Welder/Fitter II: 3–5 years of combined fitting and welding experience in structural or industrial fabrication., • Combination Welder/Fitter III: 6+ years of combined fitting and welding experience, including complex and high-precision builds. Preferred • Certification in MIG and/or additional welding processes (TIG, flux-core, stick)., • Formal blueprint reading or structural layout training., • Experience operating brake press, shears, or plasma cutters., • Prior experience in industrial or modular fabrication environments., • Demonstrated ability to build a base start-to-finish from the drawing package with no rework. Testing Requirements: Welding Test Required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionTIG / COMBO PIPE WELDER Brookshire, TX | Temp-to-Hire DIHO Consulting USA LLC is seeking an experienced TIG / Combo Pipe Welder for a leading industrial manufacturing and pipe fabrication operation. The ideal candidate has recent hands-on experience producing clean, consistent TIG root welds on pipe, understands WPS requirements, and can maintain production-quality standards in a fast-paced fabrication environment. Requirements • TIG root welding experience on pipe, • Pipe fabrication experience, • Ability to read and follow WPSs, • Understanding of fit-up, penetration, and root consistency, • Ability to identify unacceptable gaps and high-low conditions, • Experience with weld documentation and traceability, • Willingness to complete a weld test, • Ability to work overtime (up to approximately 60 hours/week)Preferred, • TIG & MIG (Combo) welding experience, • Manufacturing or fabrication shop experience, • Experience working in quality-driven production environments This is a temp-to-hire opportunity offering long-term stability and growth with an established manufacturing operation.

Job Description Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Performs pipe welding using MIG, TIG and Flux processes as required., • Reads and interprets blueprints, drawings, and welding symbols., • Fabricates, assembles, and repairs metal structures and components., • Sets up welding machines based on job requirements (materials, thickness, position)., • Inspects welds for accuracy, quality, and compliance with specifications., • Uses grinders, cutting torches, saws, and other fabrication tools., • Performs layout, fitting, and measuring to prepare materials for welding., • Follows safety procedures, including PPE use, hot‐work protocols, and equipment inspections., • Maintains welding equipment and reports needed repairs., • Works with supervisors and team members to meet production deadlines., • Completes required documentation such as weld logs, inspection forms, or work orders., • Follows strict safety protocols, including wearing protective gear and adhering to OSHA regulations.\nCompany Description RCS Personnel is a staffing company who works with customers seeking to fill their skilled, light industrial and administrative positions. We offer terms from temporary, temp-hire & direct hires. Visit one of our branches to see how we can assist you. Here is the link to register with us https://hrcenter.ontempworks.com/en/HomelandStaffing. RCS Personnel is a staffing company who works with customers seeking to fill their skilled, light industrial and administrative positions. We offer terms from temporary, temp-hire & direct hires. Visit one of our branches to see how we can assist you.\r\n\r\n Here is the link to register with us https://hrcenter.ontempworks.com/en/HomelandStaffing.

Job Description Summary/Objective: The Pipe Welder/Fitter will weld, cut, and braze metal pieces and products by using flame-cutting and hand welding equipment. Duties/Responsibilities: • Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job., • Fabricates various pipe spools and structural supports using cutting, burning, and welding techniques and equipment., • Interpret blueprints, drawings, and measurements to plan layouts., • Weld small and large diameter carbon and stainless-steel piping and structural members., • Use specialized machinery for industrial welding and oversee machines that perform the same job., • Maintain and repair all machinery., • Assess welded surfaces, structures and components to identify errors., • Follow and enforce strict safety regulations such as wearing heat-resistant gloves, protective masks, and safety shoes., • Monitor machinery for appropriate usage and temperature., • Weld components in flat, vertical, and overhead positions., • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Prepares, assembles, and tacks weld parts and surfaces to be welded., • Maintains, organizes, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered., • Performs other related duties as assigned. Required Skills/Abilities: • Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair, • Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints., • Excellent ability to read and listen to assignments given in a variety of forms., • Ability to read and interpret blueprints and designs., • Basic understanding of mathematics as related to welding assignments., • Outstanding attention to detail. Education and Experience: • A valid certificate in welding from an accredited institution is preferred., • Mig, Tig and flux core welding knowledge. Physical Requirements: • Must be able to weld components that are vertical, flat, or overhead., • Must have enough manual dexterity and stability as required for precision work., • Must be able to see details at close range., • Must be able to lift up to 50 pounds at times., • Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Freedom Waterworks is an Equal Opportunity Employer. All employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other protected characteristic in accordance with applicable federal, state, and local laws. \nCompany Description Build Your Career. Make an Impact. Grow With Us. At Freedom Waterworks, we believe great employees are developed, not just hired. Whether you're starting your career or looking for a new opportunity, we provide hands-on training, career growth, and the support needed to succeed in the waterworks industry. We are committed to: -Career Development – We hire for potential and invest in training, coaching, and professional growth. -Advancement Opportunities – Many of our team members grow into leadership and specialized roles through internal promotion and development. -Safety First – We are committed to providing a safe workplace where every employee goes home safely each day. -Team-Oriented Culture – We treat employees with respect, value hard work, and foster a collaborative environment where everyone contributes to our success. -Meaningful Work – Our products and services help deliver clean water and support critical infrastructure in the communities we serve. -Employee Appreciation – From company events and recognition programs to competitive benefits and paid time off, we strive to take care of our people. Build Your Career. Make an Impact. Grow With Us.\r\n\r\nAt Freedom Waterworks, we believe great employees are developed, not just hired. Whether you're starting your career or looking for a new opportunity, we provide hands-on training, career growth, and the support needed to succeed in the waterworks industry.\r\n\r\nWe are committed to:\r\n•Career Development – We hire for potential and invest in training, coaching, and professional growth. \r\n•Advancement Opportunities – Many of our team members grow into leadership and specialized roles through internal promotion and development. \r\n•Safety First – We are committed to providing a safe workplace where every employee goes home safely each day. \r\n•Team-Oriented Culture – We treat employees with respect, value hard work, and foster a collaborative environment where everyone contributes to our success. \r\n•Meaningful Work – Our products and services help deliver clean water and support critical infrastructure in the communities we serve. \r\n•Employee Appreciation – From company events and recognition programs to competitive benefits and paid time off, we strive to take care of our people.

Job Description Highlights Electrical is seeking an experienced Shop Welder / Fabricator to join our in-house fabrication shop. This position supports our electrical and lighting operations through custom fabrication, repair, modification, and reproduction of specialty metal components. Our shop fabricates and modifies/builds light poles, brackets, custom light fixtures, and related components, as well as reproduces obsolete or hard-to-find fixtures and parts. Much of our work is custom or one-of-a-kind, so we are looking for someone who can work from drawings, measurements, sketches, or an existing part and determine how to build what is needed. Key Responsibilities • Perform MIG and TIG welding on custom fabrication projects, • Fabricate, modify, and repair light poles, brackets, fixtures, supports, and related components, • Reproduce obsolete or difficult-to-source fixtures and parts using an existing item as a pattern, • Measure, lay out, cut, drill, grind, fit, weld, and assemble materials, • Work from drawings, sketches, measurements, or existing samples, • Troubleshoot fabrication challenges and develop practical solutions, • Operate common shop fabrication equipment and hand/power tools, • Inspect completed work for accuracy, fit, and quality, • Maintain a clean and safe shop and follow company safety procedures Qualifications • Previous welding and metal fabrication experience required, • Proficient in MIG and TIG welding, • Stick welding experience preferred, but not required, • Strong measuring, layout, fitting, and fabrication skills, • Ability to work from drawings, sketches, measurements, or existing parts, • Mechanical aptitude and strong problem-solving skills, • Ability to work independently on custom and one-off projects, • Ability to read, understand, and communicate in English sufficiently to follow written and verbal work instructions, drawings, safety requirements, and communicate effectively with supervisors and team members, • Experience with lighting components, poles, fixtures, or similar fabrication is a plus What This Position Is This position is ideal for a versatile shop fabricator who enjoys custom work, troubleshooting, repairing, modifying, and building things that may not be available off the shelf. We are looking for someone who can be handed an existing fixture or component and figure out how to repair it, modify it, or reproduce it. The primary focus is custom metal fabrication supporting commercial and municipal electrical and lighting projects. \nCompany Description Highlights Electrical has served the Houston area since 1986. We are looking for an estimator who understands the electrical industry, takes ownership of their bids, and can help us continue pursuing and delivering quality projects throughout the Houston area. Highlights Electrical has served the Houston area since 1986. We are looking for an estimator who understands the electrical industry, takes ownership of their bids, and can help us continue pursuing and delivering quality projects throughout the Houston area.

Job Description Welder cum mechanic Mechanic cum welder – 2-3 years’ experience – MIG, STICK, TIG (mostly stainless steel) with combination Minimum 2-3 years of Mig, Stick, Tig welding (Mostly stainless steel) with combination of mechanical experience, forklift, crane operations, optional servicing Rotating equipment’s like pumps, gas turbines, decanters performing inspections • Set-up and operate manual, semi-automatic and automatic welding equipment as required for TIG, MiG, arc, air arc, plasma transferred welding and fusing operations., • Adhere to welding trade practices to layout, fit, level, align and weld parts., • Select proper welding tips, rods, wire, and amperage., • Utilize pneumatic, power, hydraulic and hand tools to complete tasks., • Dye penetration inspection process – Hand clean areas to be inspected, clean dye areas, rinse remaining dye from plates, liners, and nozzles., • Perform work other related tasks as required., • Location- NW Houston- Pay range 22-26$ (based on Experience level), • Day shift, • Must have clean background, • Pass drug test

Job Description We are seeking a skilled and motivated Welder/Fabricator specializing in TIG welding to join our fabrication team. In this role, you will fabricate high-quality architectural metal railing systems and components for commercial construction projects. Our work requires precision and craftsmanship, as many components have exposed architectural finishes. The ideal candidate has experience with stainless steel, aluminum, and carbon steel, can read shop drawings, and produces clean, accurate welds and assemblies. Duties Perform TIG welding and fabrication of architectural railing systems and related components. Fabricate handrails, guardrails, posts, frames, brackets, and other custom metal components. Read and interpret shop drawings, fabrication drawings, and project specifications. Measure, cut, fit, weld, grind, and assemble components according to approved drawings. Produce clean, consistent welds suitable for exposed architectural applications. Operate saws, grinders, drills, plasma cutters, welding equipment, and other fabrication tools. Verify dimensions, alignment, angles, and overall fit before final welding. Inspect completed work for quality, accuracy, and conformance with project requirements. Follow company safety procedures and maintain a clean and organized work area. Work closely with other fabricators, finishers, and shop personnel to meet production schedules. Requirements Previous experience as a Welder/Fabricator, preferably in architectural or custom metal fabrication. Strong TIG welding skills required; stainless steel experience highly preferred. Experience with aluminum and carbon steel is a plus. Ability to read and interpret architectural shop and fabrication drawings. Strong fitting, measuring, cutting, grinding, and assembly skills. Ability to produce clean welds for high-visibility architectural applications. Experience with common fabrication equipment, power tools, and measuring tools. Strong attention to detail and commitment to quality craftsmanship. Ability to work independently and as part of a fast-paced team. Experience with architectural railings, decorative metals, or glass railing systems is a strong plus.

Job Description Position Overview The Welder/Fabricator is responsible for welding, fabrication, modification, repair, fit-up, and assembly of structural and mechanical components used in industrial, oil & gas, and power-generation equipment. The position works from engineering drawings, weld procedures, specifications, bills of material, and work instructions to produce high-quality components that meet dimensional, structural, and workmanship requirements while maintaining high standards for quality, safety, dimensional accuracy, and workmanship. The ideal candidate has strong hands-on fabrication skills, can independently set up and operate welding equipment, accurately interpret fabrication drawings and weld symbols, and is comfortable working with carbon steel, stainless steel, and other metals commonly used in industrial equipment manufacturing. Key Responsibilities • Perform MIG, TIG, and/or Stick welding on carbon steel, stainless steel, and other materials as required., • Fabricate, modify, repair, and assemble structural and mechanical components according to engineering drawings and specifications., • Read and interpret blueprints, fabrication drawings, weld symbols, bills of material, and work instructions., • Measure, cut, fit, tack, weld, grind, and finish materials to required dimensions and tolerances., • Perform fit-up and welding of structural frames, brackets, supports, skids, piping supports, and equipment components., • Support fabrication and modification of oilfield and industrial equipment, including trailers, pump packages, skids, and related production equipment., • Identify fabrication issues, dimensional discrepancies, material defects, or drawing conflicts and communicate them to the appropriate supervisor, Quality, or Engineering personnel., • Perform rework and repair welding when authorized and according to approved procedures., • Use welding machines, grinders, saws, cutting equipment, measuring devices, clamps, and other fabrication tools safely., • Conduct visual inspections of completed welds and fabricated components before releasing work for Quality inspection., • Maintain accurate production, work-order, material, and inspection documentation as required., • Follow established WPS, quality requirements, and applicable welding standards., • Participate in Job Safety Analyses (JSAs), pre-job meetings, 6S activities, and other safety initiatives., • Maintain welding equipment, tools, and assigned work areas in clean and serviceable condition., • Support assembly, repair, testing, and other production activities when fabrication workload permits., • Perform other production-related duties as assigned. Minimum Requirements • High school diploma or GED preferred., • 2 years of industrial welding/fabrication experience preferred., • Demonstrated hands-on experience with MIG, TIG, and/or Stick welding., • Ability to read fabrication drawings, blueprints, weld symbols, and measurements., • Ability to use tape measures, squares, levels, calipers, and other measuring tools., • Working knowledge of fabrication techniques, weld preparation, joint fit-up, and material preparation., • Ability to perform basic layout, cutting, fitting, grinding, and finishing., • Ability to pass a company-required welding test/qualification before performing production welding independently., • Experience in oil & gas, heavy equipment, manufacturing, pressure pumping, or industrial fabrication is preferred., • Ability to safely operate welding and fabrication equipment., • Ability to identify common weld defects and fabrication quality issues., • Ability to pass a company-required welding/fabrication skills test prior to performing production welding independently., • Ability to work effectively in a manufacturing/industrial environment and meet established production and quality requirements., • Must be able to provide and maintain required personal hand tools appropriate for the position. Preferred Qualifications • 3+ years of industrial, heavy equipment, oil & gas, power-generation, or manufacturing welding/fabrication experience., • Experience welding structural steel, stainless steel, or heavy-gauge materials., • Experience fabricating skids, trailers, frames, pump packages, pressure-pumping equipment, or other industrial equipment., • Experience working from detailed fabrication drawings and engineering specifications., • Familiarity with Welding Procedure Specifications (WPS), weld qualification requirements, and weld inspection processes., • Experience working in accordance with AWS, ASME, API, or other applicable industry standards., • Experience with FCAW or other specialized welding processes., • Experience in performing weld repairs and rework based on Quality or Engineering requirements., • Previous experience in oil & gas, power generation, industrial equipment manufacturing, or heavy equipment manufacturing., • Welding certifications or qualifications relevant to the position. Physical & Work Environment Requirements • Ability to stand, walk, bend, stoop, kneel, climb, and work in various positions for extended periods., • Ability to lift and move materials and tools weighing up to [XX] pounds with or without assistance., • Ability to work around welding fumes, heat, sparks, noise, dust, and industrial equipment while following required PPE and safety procedures., • Ability to work in a manufacturing/production environment and meet scheduled production requirements., • Ability to work overtime, weekends, or extended hours as required by production schedules., • Must be able to wear required PPE, including welding hood, safety glasses, gloves, hearing protection, protective clothing, and safety footwear. Welding Qualification • Selected candidates may be required to successfully complete a hands-on welding/fabrication test designed to evaluate:, • Welding technique and consistency, • Weld appearance and quality, • Fit-up and joint preparation, • Blueprint and weld-symbol interpretation, • Measurement and dimensional accuracy, • Welding machine setup, • Ability to follow a WPS, • Safe operation of welding and fabrication equipment, • Successful completion of the welding qualification test may be required before the candidate is permitted to perform production welding independently. Additional Notes The Welder/Fabricator is expected to perform all duties with a strong commitment to safety, ensuring the well-being of themselves, coworkers, customers, and third parties always. The role requires flexibility to work extended hours, including days, and as needed, nights, weekends, and holidays to support project and service requirements. Work conditions may vary and include indoor and outdoor settings, exposure to varying weather conditions, and active industrial or construction sites. The Welder/Fabricator must consistently follow all safety protocols and properly utilize required personal protective equipment (PPE).

Job Description FieldBridge is looking for a Welder in Houston, TX to work for a massive global energy technology company. We offer weekly pay + benefits. Pay is $22 - $26/hour | 6:00 AM–2:30 PM, Monday–Friday, OT as needed | Weekly pay every Friday | Overtime opportunities available | At $26/hr and 50 hrs/week, earn weekly paychecks of $1,430 gross. Position Overview This role performs precision cladding and weld repair on machined components for gas and steam turbine parts, working independently to meet production schedules while maintaining high quality standards. Key Responsibilities • Perform visual and in-process inspections per API and ISO quality specifications, • Read and interpret engineering drawings and specifications, • Overlay components using TIG and MIG per approved weld procedures, • Set up and weld components within specific weld procedure parameters, • Detail grind components following weld repairs Required Qualifications • High School Diploma or GED (advanced degree may substitute for experience), • 7+ years of TIG and MIG welding experience, • Experience with foot control TIG and MIG machines, • Experience with SMAW and GMAW welding procedures preferred, • Manual TIG welding experience, • Oil & gas industry background

Job Description COMBO WELDER Position Summary • We are seeking an experienced Combo Welder with strong industrial welding and fabrication experience. The ideal candidate will be capable of performing multiple welding processes and working with carbon steel and alloy materials in demanding industrial environments., • The Combo Welder must be able to read and interpret blueprints, welding procedures, and technical drawings and demonstrate a strong understanding of welding safety, quality requirements, and industry standards. Key Responsibilities, • Perform welding, fabrication, fit-up, and repair work on industrial equipment, piping, components, and structures., • Perform welding using TIG/GTAW and Stick/SMAW processes., • Weld carbon steel and alloy materials, including Inconel when required., • Read and interpret blueprints, weld symbols, drawings, and welding procedures., • Perform proper weld preparation, fit-up, preheating, and post-weld activities as required., • Inspect completed welds for quality and compliance with specifications., • Use welding machines, grinders, cutting equipment, measuring tools, and other hand and power tools., • Maintain proper welding parameters and follow approved welding procedures., • Work safely while following all company, client, and site safety requirements., • Maintain a clean and organized work area., • Work effectively with Millwrights, Machinists, Pipefitters, Fitters, and other craft personnel. Required Qualifications, • Minimum 3–5 years of industrial welding experience preferred., • Strong experience with TIG/GTAW and Stick/SMAW welding processes., • Experience welding carbon steel is required., • Experience with Inconel or other alloy materials preferred., • Ability to read and understand blueprints, welding symbols, and technical drawings., • Ability to perform quality fit-up and welding with minimal supervision., • Strong knowledge of welding safety and industrial work practices., • Must be able to pass required welding qualification testing., • Must be willing and able to work overtime, weekends, and varying schedules as project requirements dictate. Physical Requirements, • Ability to stand, bend, kneel, climb, and work for extended periods., • Ability to lift and carry materials and welding equipment as required., • Ability to work in industrial environments and potentially in confined or elevated areas., • Must be able to wear required PPE, including welding hood, gloves, protective clothing, safety glasses, hearing protection, and other site-required equipment. Preferred Qualifications, • Previous experience in power generation, oil & gas, petrochemical, refining, manufacturing, or heavy industrial construction., • NCCER or other recognized welding certifications., • Previous experience with pressure vessel or code welding., • Experience working under ASME or other applicable industry codes., • Ability to successfully complete client-specific welding qualification testing., • Nuclear experience or able to gain access to nuclear sites.

Job Description Fitter / Welder – TIG & Flux Core Houston, TX, TX Manufacturing Description About U.S. Bellows U.S. Bellows, a division of Piping Technology & Products, Inc. (PT&P), is a leading manufacturer of engineered expansion joints and bellows for piping systems. Serving industries such as oil & gas, power generation, and chemical processing, U.S. Bellows is known for precision fabrication, quality workmanship, and reliable solutions that protect critical infrastructure. Position Summary The Fitter/Welder – TIG & Flux Core is responsible for fitting, aligning, and welding metallic bellows, expansion joints, and related components in accordance with engineered drawings, Welding Procedure Specifications (WPS), and applicable codes. This role requires strong fitting skills, proficiency in TIG and Flux Core welding, and a high level of attention to detail to produce high-quality, code-compliant assemblies. Key Responsibilities • Fit, assemble, and weld bellows and expansion joint components, including convolutions, pipe ends, flanges, liners, and hardware, • Read and interpret fabrication drawings, blueprints, weld symbols, tolerances, and specifications, • Perform proper fit-up for welding, including joint preparation, alignment, and root openings, • Weld using GTAW (TIG) and FCAW (Flux Core) in accordance with approved WPS, • Produce high-quality, multi-pass welds meeting ASME and customer requirements, • Measure, mark, cut, grind, and prepare materials for fabrication, • Maintain required preheat and interpass temperature controls when applicable, • Support and pass NDE inspections (PT, MT, RT, UT as required) and perform approved weld repairs, • Verify dimensional accuracy and alignment before and after welding, • Safely operate hand tools, power tools, fixtures, forklifts, and overhead cranes, • Complete travelers, weld logs, and traceability documentation, • Follow all safety, quality, and housekeeping standards Requirements Qualifications • High school diploma or GED required, • Must pass company-administered welding and fitting tests, • Must pass company-administered measuring tape skills test, • 3+ years of welding and fitting experience in a manufacturing or fabrication environment, • Proficient in TIG (GTAW) and Flux Core (FCAW) welding, • Experience welding carbon steel and stainless steel (Inconel a plus, if applicable), • Ability to read, write, and interpret fabrication drawings and production documentation in English, • Strong attention to detail, safety awareness, and teamwork skills, • Ability to work in a fast-paced, team-oriented manufacturing environment Physical Requirements • Ability to stand for prolonged periods (8+ hours), • Ability to lift, push, pull, or carry up to 50 lbs independently, • Frequent bending, stooping, reaching, and manual handling of materials, • Good hand-eye coordination and manual dexterity, • Visual acuity to read measuring tools, drawings, and identify weld or fit-up defects, • Ability to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection, • Must pass initial and ongoing occupational health screenings as required Work Environment Manufacturing shop environment with exposure to moving mechanical parts, sharp materials, heat, dust, and moderate to loud noise. Work schedules may include overtime or weekend shifts based on production demands. Company DescriptionPT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficientlyPT&P is a trusted leader in the design and manufacturing of engineered products for piping systems, proudly serving industries like oil & gas, power, and chemicals since 1978. Headquartered in Houston, we’re known for innovation, quality, and customer commitment. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently

Job DescriptionTravel Pipe Welder - Stick and Tig (Data Center Construction) Location: Southaven, MS (Travel Required) Pay: $30.00-$60.00/hr + Overtime (6 12's, option for 7 12's) Per Diem - 160/Day Type: Contract-to-Hire (90 Days) Start Date: 1-2 weeks depending on interview Build the Future of AI Infrastructure We are seeking experienced Travel TIG Welders to support the construction of large-scale, high-performance data centers. This is an opportunity to work on one of the nation's most advanced industrial construction projects, helping build the infrastructure that powers next-generation artificial intelligence and supercomputing technologies. This role is ideal for welders with strong pipe welding experience, particularly TIG welding on stainless steel and stick welding on carbon steel, who thrive in fast-paced industrial environments and take pride in producing high-quality work. Responsibilities • Perform TIG and combo pipe welding on stainless steel and carbon steel piping systems., • Fit, tack, align, and weld large-bore industrial piping, pipe racks, skids, platforms, supports, and structural steel assemblies., • Lay out, cut, bevel, grind, and prepare pipe and structural members for installation., • Read and interpret isometric drawings, spool sheets, weld symbols, structural drawings, and specifications., • Verify fit-up, root openings, joint preparation, and weld quality before and after welding., • Work on higher-pressure water and gas systems common in industrial and data center construction., • Support installation of hangers, strut, supports, and other mechanical components., • Assist with weld repairs, punch-list completion, hydrotesting, leak testing, and system turnover activities., • Maintain organized work areas, laydown yards, and material inventory., • Follow all site-specific safety requirements including LOTO, hot-work permits, fire watch procedures, and PPE standardsRequired Qualifications, • Minimum 3+ years of industrial pipe welding experience., • Strong TIG welding experience on stainless steel., • Experience with Stick (SMAW) welding on carbon steel., • Current ASME Section IX qualification (6G preferred) or ability to pass a site weld test., • AWS D1.1 structural welding certification or equivalent experience., • Ability to read isometric drawings, weld maps, spool drawings, and specifications., • Experience in industrial construction, process piping, power plants, refineries, manufacturing facilities, or large mechanical construction projects., • Ability to work safely in an active construction environment.Preferred Qualifications, • Previous data center construction experience., • Experience with Sch. 10 stainless and heavier wall pipe., • Knowledge of weld maps, heat numbers, rod control, and continuity tracking., • Experience performing hydrotests, pressure testing, air testing, and leak testing., • Military welding experience., • NCCER Welding Certification., • Additional AWS Pipe Certifications.Weld Test Requirements Candidates must successfully complete a weld test on Day 1: • TIG on Stainless Steel, • Stick on Carbon Steel, • Tested to ASME Section IX standards No formal interview required. Qualified candidates who pass the weld test can move directly into the onboarding process. Work Environment • Active industrial data center construction site., • Indoor and outdoor work in varying weather conditions., • Frequent use of welding machines, torches, grinders, and power tools., • Work at heights may be required., • Strict adherence to safety regulations and construction site procedures.Compensation & Benefits, • $30-$60/hour based on experience and qualifications., • Significant overtime opportunities available., • Medical, Dental, and Vision Insurance., • 401(k) with Pre-Tax and Roth Options., • Life Insurance., • Short-Term and Long-Term Disability., • Health Savings Account (HSA)., • Employee Assistance Program (EAP)., • PTO and Eligible Leave Programs., • Transportation Benefits.Why Apply? This is an opportunity to join a high-profile industrial construction project supporting cutting-edge AI and data center infrastructure. Successful employees who convert to permanent status may become eligible for a long-term equity program, providing the opportunity to share in the future success of the organization. If you're a 6G TIG Welder, Pipe Welder, Combo Welder, or Industrial Welder with experience in high-quality stainless and carbon pipe welding, we want to hear from you. Apply today and put your welding skills to work on one of the largest industrial construction projects in the country Job Type & Location This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $30.00 - $60.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Houston, TX. Application Deadline This position is anticipated to close on Oct 31, 2026. Workplace Type This is a fully onsite position in Houston,TX. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionAbout the Role:Industrial Pipe and Equipment Systems is looking for a skilled Orbital Welders for commercial refrigeration to join our team. If you're a precision-focused welding professional ready to work on high-stakes piping systems, this is your opportunity to do what you do best alongside a team that values craftsmanship and quality. Responsibilities: • Set up, operate, and monitor orbital welding equipment for pipe and tube applications, • Perform precision TIG/GTAW orbital welds on stainless steel, and alloy piping systems, • Read and interpret welding procedures, blueprints, and isometric drawings, • Inspect welds for quality and compliance with applicable codes (ASME, AWS), • Maintain and troubleshoot orbital welding machines and related equipment, • Coordinate with pipe fitters, engineers, and project supervisors to meet project timelines, • Document weld logs, inspection records, and material traceability reportsRequirements:, • Proven experience as an Orbital Welder or automated GTAW/TIG welder in an industrial setting, • Proficiency with orbital welding systems (e.g., Arc Machines, Polysoude, or similar), • Knowledge of ASME B31.3 and other relevant piping codes and welding standards, • Ability to read isometric drawings, weld maps, and WPS/PQR documentation, • AWS or ASME welding certifications preferred, • Strong attention to detail and commitment to quality workmanship, • Ability to work in industrial environments including refineries, petrochemical, or manufacturing facilities, • Must have reliable transportation, • Must have own tools, • Position is 100% TravelAbout Us:Industrial Pipe and Equipment Systems is a trusted name delivering top-tier piping fabrication and equipment solutions to clients across the region. Our reputation is built on precision, reliability, and a team of dedicated professionals who take pride in every weld and every project. We offer a collaborative work environment where skilled tradespeople are valued, supported, and given the tools they need to succeed. 10-99 Pay Scale: • 10-99 ($65-$75 an hour depending on experience), • MUST TRAVELW-2 Pay Scale:, • W2 ($ 35-$45 an hour introductory period), • $150 a day per diem, • Mileage compensation, • MUST TRAVEL

Job Description Pipe Welder Apache Workforce is hiring experienced Pipe Welders for a manufacturing facility in Houston, TX. Pay: $27.00–$33.00 per hour, depending on experience Shifts: Day and Night Shifts Available Night Shift Differential: Additional 10% Job Summary The Pipe Welder will weld pipe and related components according to drawings, welding procedures, and quality requirements. Candidates should have experience with TIG and MIG/Flux Core welding and be comfortable working in an industrial fabrication environment. A 6G mig root flux fill and cap welding test is required before placement. Responsibilities Weld pipe and related components using TIG, MIG, and Flux Core processes. Set up welding equipment and adjust machine settings as needed. Read and follow blueprints, P&IDs, weld symbols, and fabrication drawings. Select the appropriate filler metal and welding materials for the job. Check completed welds for quality and proper appearance. Use measuring tools and gauges to verify dimensions. Complete required production or quality documentation. Perform basic inspections and maintenance of welding equipment. Assist with material identification and inventory activities when needed. Maintain a clean and organized work area. Follow all company safety procedures and PPE requirements. Perform other welding and fabrication duties as assigned. Qualifications Experience with GTAW (TIG) and GMAW/FCAW (MIG/Flux Core). Ability to pass a 6G welding test. Ability to read blueprints, P&IDs, weld symbols, and fabrication drawings. Knowledge of pipe materials, schedules, and welding processes. Ability to use basic measuring tools and gauges. Good attention to detail and ability to follow welding procedures. Ability to work independently and with a team. Basic math and measurement skills. High school diploma or GED preferred. Work Environment & Physical Requirements Work is performed in an industrial manufacturing/fabrication shop. Ability to stand and work on your feet for extended periods. Frequent bending, reaching, and movement throughout the shift. Ability to lift and move materials up to 50 lbs. Ability to work extended shifts and overtime as needed. Work may be performed in a non-air-conditioned facility. Safety glasses and other required PPE must be worn. Steel-toe boots are required. Benefits Eligible employees may have access to: Weekly pay Medical, dental, and vision insurance Paid time off Life and disability insurance

Job Description Welder Location: 6525 Homestead Road, Houston, TX 77028 Work Hours: 6:00 AM - 2:30 PM, Monday through Friday Pay Range: Competitive Compensation Make the Right Connection—Build Your Career with Dixon! The Dixon Group is seeking a highly motivated Welder to join our production team! If you are a precision-focused craftsperson with experience in both MIG and TIG welding and ready to contribute to the creation of high-quality, essential industrial products, we invite you to apply! In this crucial role, you will be responsible for executing high-quality welds and preparing materials to meet our strict production standards. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation’s heroes. Veterans are strongly encouraged to apply. What You'll Do: • Perform production-level MIG (GMAW) and TIG (GTAW) welding on specialized industrial fluid transfer products, ensuring all work meets required specifications and quality control standards., • Utilize oxygen/acetylene torches to cut metals, and operate hand/power grinding tools to clean surfaces, bevel edges, fit metals together, and remove slag., • Execute essential pre-weld processes, including sandblasting, grinding, and manual machining (e.g., use of lathes or mills for prep), to guarantee optimal material fit and weld integrity., • Adhere strictly to all safety protocols and procedures, maintain a clean and organized work area, and regularly inspect finished welds for quality assurance., • Perform routine maintenance and calibration of welding equipment to ensure reliable performance. What We're Looking For: • High school diploma or GED required., • Successful completion of a formal vocational/technical welding program or apprenticeship is strongly preferred., • Proven professional production welding experience, specifically utilizing MIG and TIG processes., • Demonstrated ability to read and interpret blueprints, schematics, and welding symbols (e.g., AWS standard symbols) to achieve precise fit-up and weld dimensions., • Ability to safely lift and manipulate materials and stand for extended periods, as required by the production environment., • Welding certification preferred, or the ability and willingness to obtain certification upon hire. What We Offer: • Medical, dental, and vision insurance for you and your family, • Competitive salary, • Bonus programs, • 401K retirement plan, • Training opportunities, • Tuition reimbursement, • Paid vacation, PTO, and holidays, • Gym reimbursements, and more! Who We Are: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. Join us and be a part of a team that values your contributions and supports your goals! We do not provide sponsorships to work in the United States. The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons.The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Company Overview: Flowserve is a global manufacturer of pumps, valves, seals, and aftermarket services, delivering comprehensive flow control solutions that support essential industries such as energy, clean water, and pharmaceuticals. If you're looking for a culture built on ingenuity, innovation, and excellence, Flowserve offers the opportunity to put your experience in motion. Whether you're an individual contributor or a people leader, you'll find meaningful opportunities for professional growth, competitive rewards, and a workplace grounded in our core values: People, Safety, Integrity, Ownership and Ingenuity. At Flowserve, we're inspired by what we can achieve together-creating extraordinary flow control solutions that strengthen today's world while building tomorrow. Flowserve is seeking a highly skilled and precision-driven Welder to join our customer-focused manufacturing and aftermarket repair operations. In this role, you will be an integral part of a collaborative team, working side-by-side with manual machinists, mechanics, and assemblers to solve challenging mechanical problems and maintain rigorous production schedules. ? Operating in a fast-paced environment that demands sharp technical understanding, deep attention to detail, and a commitment to quality workmanship, you will interpret engineering blueprints, plan component layouts, and execute high-integrity welds across multiple processes (TIG, MIG, MAG, Stick). Your craftsmanship ensures that critical flow control and heavy industrial equipment are manufactured and restored to exact OEM tolerances for our energy and industrial infrastructure clients. ? Key Responsibilities • Set up, calibrate, and execute multi-position welds utilizing GTAW (TIG), GMAW (MIG/MAG), and SMAW (Stick) methods in strict accordance with welding procedure specifications (WPS) and engineering instructions., • Plan, lay out, and configure complex weldments directly from engineering schematics, fabrication drawings, and manufacturer specification sheets using applied shop math and precision measuring tools., • Prepare raw components and base metals safely prior to assembly, properly identifying materials and utilizing conventional shop machinery (such as toolroom lathes and beveling equipment) for weld preparation., • Execute high-integrity fabrication welds on new equipment builds and perform precision structural buildup, hardfacing, and cladding repairs on worn or damaged industrial components., • Verify finished fabrications against strict dimensional tolerances, welding inspection criteria, and quality assurance standards., • Perform controlled post-weld heat treatment (PWHT) operations cleanly and accurately based on explicit thermal process documents and heat charts., • Collaborate directly with assemblers, machinists, and service coordinators to troubleshoot equipment wear patterns and execute fast-track repair solutions., • Record accurate, timely quality data, travel routers, and material heat logs into computer-based tracking systems (ERP) and manual traveler documentation., • Maintain an active safety mindset by utilizing required PPE, participating in daily safety briefings, conducting routine equipment inspections, and exercising Stop Work Authority when safety risks arise. ? Required Qualifications • High School Diploma or GED equivalent., • Valid, current professional Welder Certification (or ability to recertify to ASME Section IX / AWS standards upon hire)., • 5 to 7+ years of professional welding experience in a mechanical manufacturing facility, heavy industrial repair center, or precision machine shop environment., • Demonstrated multi-process mastery across TIG, MIG, MAG, and Stick welding on diverse industrial metallurgy (carbon steel, stainless steel, and specialty alloys)., • Solid blueprint reading capability, including standard welding symbols, geometric dimensioning and tolerancing (GD&T), and shop layout planning., • Physical ability to stand for extended periods, perform repetitive upper-body motions, maneuver heavy weldments, and lift up to 50 lbs safely., • Dependable attendance record with the flexibility to work overtime and weekend shifts to support urgent turnaround and customer plant outage demands., • Legally authorized to work in the United States without company sponsorship. ? Preferred Qualifications • Prior welding and overlay experience centered on industrial valves, actuators, pumps, or related pressure-retaining flow control equipment., • Active Non-Destructive Examination (NDE) certifications, particularly Liquid Penetrant Testing (PT) and Magnetic Particle Testing (MT)., • Direct practical experience operating post-weld heat treatment (PWHT) heating pads and temperature recording equipment., • Working familiarity with enterprise resource planning systems (such as SAP) for labor tracking and job router confirmations. ? What We Can Offer You At Flowserve, you'll find a range of options to fit your, and your family's, needs. We want to provide our team with the right resources to invest in your physical, mental and financial well-being no matter where you sit or what stage of life you're in. ? Our benefits include: • Highly Competitive Hourly Base Pay with Overtime Opportunities, • Medical, Dental & Vision Insurance with Flexible Spending (FSA) and Health Savings Accounts (HSA), • 401(k) Retirement Savings Plan with Immediate Company Match, • Short-Term and Long-Term Disability Protection, • Paid Time Off (PTO) and Company-Paid Holidays, • Comprehensive Parental Leave, • Life, Supplemental Life, Child, Spousal, and AD&D Insurance, • Safety Footwear and Prescription Safety Eyewear Allowances, • Continuous Technical Training & Long-Term Career Mobility across Global Operations ? If this sounds like the opportunity that you have been looking for, please click Apply. Req ID : R-19683 Job Family Group : Operations Job Family : OP Welding EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to _. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company Overview: Flowserve is a global manufacturer of pumps, valves, seals, and aftermarket services, delivering comprehensive flow control solutions that support essential industries such as energy, clean water, and pharmaceuticals. If you're looking for a culture built on ingenuity, innovation, and excellence, Flowserve offers the opportunity to put your experience in motion. Whether you're an individual contributor or a people leader, you'll find meaningful opportunities for professional growth, competitive rewards, and a workplace grounded in our core values: People, Safety, Integrity, Ownership and Ingenuity. At Flowserve, we're inspired by what we can achieve together-creating extraordinary flow control solutions that strengthen today's world while building tomorrow. Flowserve is seeking a highly skilled and precision-driven Welder to join our customer-focused manufacturing and aftermarket repair operations. In this role, you will be an integral part of a collaborative team, working side-by-side with manual machinists, mechanics, and assemblers to solve challenging mechanical problems and maintain rigorous production schedules. ? Operating in a fast-paced environment that demands sharp technical understanding, deep attention to detail, and a commitment to quality workmanship, you will interpret engineering blueprints, plan component layouts, and execute high-integrity welds across multiple processes (TIG, MIG, MAG, Stick). Your craftsmanship ensures that critical flow control and heavy industrial equipment are manufactured and restored to exact OEM tolerances for our energy and industrial infrastructure clients. ? Key Responsibilities • Set up, calibrate, and execute multi-position welds utilizing GTAW (TIG), GMAW (MIG/MAG), and SMAW (Stick) methods in strict accordance with welding procedure specifications (WPS) and engineering instructions., • Plan, lay out, and configure complex weldments directly from engineering schematics, fabrication drawings, and manufacturer specification sheets using applied shop math and precision measuring tools., • Prepare raw components and base metals safely prior to assembly, properly identifying materials and utilizing conventional shop machinery (such as toolroom lathes and beveling equipment) for weld preparation., • Execute high-integrity fabrication welds on new equipment builds and perform precision structural buildup, hardfacing, and cladding repairs on worn or damaged industrial components., • Verify finished fabrications against strict dimensional tolerances, welding inspection criteria, and quality assurance standards., • Perform controlled post-weld heat treatment (PWHT) operations cleanly and accurately based on explicit thermal process documents and heat charts., • Collaborate directly with assemblers, machinists, and service coordinators to troubleshoot equipment wear patterns and execute fast-track repair solutions., • Record accurate, timely quality data, travel routers, and material heat logs into computer-based tracking systems (ERP) and manual traveler documentation., • Maintain an active safety mindset by utilizing required PPE, participating in daily safety briefings, conducting routine equipment inspections, and exercising Stop Work Authority when safety risks arise. ? Required Qualifications • High School Diploma or GED equivalent., • Valid, current professional Welder Certification (or ability to recertify to ASME Section IX / AWS standards upon hire)., • 5 to 7+ years of professional welding experience in a mechanical manufacturing facility, heavy industrial repair center, or precision machine shop environment., • Demonstrated multi-process mastery across TIG, MIG, MAG, and Stick welding on diverse industrial metallurgy (carbon steel, stainless steel, and specialty alloys)., • Solid blueprint reading capability, including standard welding symbols, geometric dimensioning and tolerancing (GD&T), and shop layout planning., • Physical ability to stand for extended periods, perform repetitive upper-body motions, maneuver heavy weldments, and lift up to 50 lbs safely., • Dependable attendance record with the flexibility to work overtime and weekend shifts to support urgent turnaround and customer plant outage demands., • Legally authorized to work in the United States without company sponsorship. ? Preferred Qualifications • Prior welding and overlay experience centered on industrial valves, actuators, pumps, or related pressure-retaining flow control equipment., • Active Non-Destructive Examination (NDE) certifications, particularly Liquid Penetrant Testing (PT) and Magnetic Particle Testing (MT)., • Direct practical experience operating post-weld heat treatment (PWHT) heating pads and temperature recording equipment., • Working familiarity with enterprise resource planning systems (such as SAP) for labor tracking and job router confirmations. ? What We Can Offer You At Flowserve, you'll find a range of options to fit your, and your family's, needs. We want to provide our team with the right resources to invest in your physical, mental and financial well-being no matter where you sit or what stage of life you're in. ? Our benefits include: • Highly Competitive Hourly Base Pay with Overtime Opportunities, • Medical, Dental & Vision Insurance with Flexible Spending (FSA) and Health Savings Accounts (HSA), • 401(k) Retirement Savings Plan with Immediate Company Match, • Short-Term and Long-Term Disability Protection, • Paid Time Off (PTO) and Company-Paid Holidays, • Comprehensive Parental Leave, • Life, Supplemental Life, Child, Spousal, and AD&D Insurance, • Safety Footwear and Prescription Safety Eyewear Allowances, • Continuous Technical Training & Long-Term Career Mobility across Global Operations ? If this sounds like the opportunity that you have been looking for, please click Apply. Req ID : R-19683 Job Family Group : Operations Job Family : OP Welding EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to _. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Company Overview: Flowserve is a global manufacturer of pumps, valves, seals, and aftermarket services, delivering comprehensive flow control solutions that support essential industries such as energy, clean water, and pharmaceuticals. If you're looking for a culture built on ingenuity, innovation, and excellence, Flowserve offers the opportunity to put your experience in motion. Whether you're an individual contributor or a people leader, you'll find meaningful opportunities for professional growth, competitive rewards, and a workplace grounded in our core values: People, Safety, Integrity, Ownership and Ingenuity. At Flowserve, we're inspired by what we can achieve together-creating extraordinary flow control solutions that strengthen today's world while building tomorrow. Flowserve is seeking a highly skilled and precision-driven Welder to join our customer-focused manufacturing and aftermarket repair operations. In this role, you will be an integral part of a collaborative team, working side-by-side with manual machinists, mechanics, and assemblers to solve challenging mechanical problems and maintain rigorous production schedules. ? Operating in a fast-paced environment that demands sharp technical understanding, deep attention to detail, and a commitment to quality workmanship, you will interpret engineering blueprints, plan component layouts, and execute high-integrity welds across multiple processes (TIG, MIG, MAG, Stick). Your craftsmanship ensures that critical flow control and heavy industrial equipment are manufactured and restored to exact OEM tolerances for our energy and industrial infrastructure clients. ? Key Responsibilities • Set up, calibrate, and execute multi-position welds utilizing GTAW (TIG), GMAW (MIG/MAG), and SMAW (Stick) methods in strict accordance with welding procedure specifications (WPS) and engineering instructions., • Plan, lay out, and configure complex weldments directly from engineering schematics, fabrication drawings, and manufacturer specification sheets using applied shop math and precision measuring tools., • Prepare raw components and base metals safely prior to assembly, properly identifying materials and utilizing conventional shop machinery (such as toolroom lathes and beveling equipment) for weld preparation., • Execute high-integrity fabrication welds on new equipment builds and perform precision structural buildup, hardfacing, and cladding repairs on worn or damaged industrial components., • Verify finished fabrications against strict dimensional tolerances, welding inspection criteria, and quality assurance standards., • Perform controlled post-weld heat treatment (PWHT) operations cleanly and accurately based on explicit thermal process documents and heat charts., • Collaborate directly with assemblers, machinists, and service coordinators to troubleshoot equipment wear patterns and execute fast-track repair solutions., • Record accurate, timely quality data, travel routers, and material heat logs into computer-based tracking systems (ERP) and manual traveler documentation., • Maintain an active safety mindset by utilizing required PPE, participating in daily safety briefings, conducting routine equipment inspections, and exercising Stop Work Authority when safety risks arise. ? Required Qualifications • High School Diploma or GED equivalent., • Valid, current professional Welder Certification (or ability to recertify to ASME Section IX / AWS standards upon hire)., • 5 to 7+ years of professional welding experience in a mechanical manufacturing facility, heavy industrial repair center, or precision machine shop environment., • Demonstrated multi-process mastery across TIG, MIG, MAG, and Stick welding on diverse industrial metallurgy (carbon steel, stainless steel, and specialty alloys)., • Solid blueprint reading capability, including standard welding symbols, geometric dimensioning and tolerancing (GD&T), and shop layout planning., • Physical ability to stand for extended periods, perform repetitive upper-body motions, maneuver heavy weldments, and lift up to 50 lbs safely., • Dependable attendance record with the flexibility to work overtime and weekend shifts to support urgent turnaround and customer plant outage demands., • Legally authorized to work in the United States without company sponsorship. ? Preferred Qualifications • Prior welding and overlay experience centered on industrial valves, actuators, pumps, or related pressure-retaining flow control equipment., • Active Non-Destructive Examination (NDE) certifications, particularly Liquid Penetrant Testing (PT) and Magnetic Particle Testing (MT)., • Direct practical experience operating post-weld heat treatment (PWHT) heating pads and temperature recording equipment., • Working familiarity with enterprise resource planning systems (such as SAP) for labor tracking and job router confirmations. ? What We Can Offer You At Flowserve, you'll find a range of options to fit your, and your family's, needs. We want to provide our team with the right resources to invest in your physical, mental and financial well-being no matter where you sit or what stage of life you're in. ? Our benefits include: • Highly Competitive Hourly Base Pay with Overtime Opportunities, • Medical, Dental & Vision Insurance with Flexible Spending (FSA) and Health Savings Accounts (HSA), • 401(k) Retirement Savings Plan with Immediate Company Match, • Short-Term and Long-Term Disability Protection, • Paid Time Off (PTO) and Company-Paid Holidays, • Comprehensive Parental Leave, • Life, Supplemental Life, Child, Spousal, and AD&D Insurance, • Safety Footwear and Prescription Safety Eyewear Allowances, • Continuous Technical Training & Long-Term Career Mobility across Global Operations ? If this sounds like the opportunity that you have been looking for, please click Apply. Req ID : R-19683 Job Family Group : Operations Job Family : OP Welding EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to _. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Job Description Job Title: Welder Job Description This role focuses on welding and fabricating carbon steel pipe and vessel products in a high-output fabrication shop. You will perform flux core and TIG welding on pipe ranging from 1" to 23" outside diameter and 1/4" to 1/2" thick, as well as work on a variety of large valves and vessel-like products. The position involves fitting, welding, and finishing complex assemblies to print in a fast-paced, overtime-rich environment. Essential Skills • At least 5 years of welding experience., • Proficiency in flux core welding & MIG on carbon steel pipe and related components., • OR Proficiency in TIG welding on carbon steel pipe and vessel-type products., • Experience welding pipe from approximately 1" to 20" in diameter or similar vessel welding work., • Ability to perform backgouging and properly refill and finish weld grooves., • Strong pipe welding and vessel welding skills on carbon steel materials., • Ability to perform fitting work, including aligning and fitting shells, supports, legs, flanges, nozzles, and caps., • Capability to perform basic math for measurements, layout, and fabrication tasks., • Comfort working significant overtime, including 60+ hours per week and extended stretches of consecutive workdays Work Environment The work takes place in a clean, air-conditioned shop designed for heavy fabrication and welding. This is an open-ended contract position expected to run through February, with the potential to continue longer depending on workload and new projects. The schedule requires comfort with long hours and extended stretches of work, including working 13 days on and 1 day off when busy and routinely working 60+ hours per week. Day shift typically runs from 6:00 a.m. to 6:00 p.m., Monday through Saturday, with some Sundays as needed. Night shift typically runs from 6:00 p.m. to 6:00 a.m., Monday through Saturday, with some Sundays as needed, and may offer direct hire opportunities for the right candidate. . . . . Job Type & Location This is a Contract position based out of Houston, TX 77032. Pay and Benefits The pay range for this position is $24.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of Houston, TX 77032. Application Deadline This position is anticipated to close on Nov 6, 2026. Workplace Type This is a fully onsite position in Houston,TX 77032. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionTIG Welder Pay: $27 - $36 Location: Houston, TX Temp-to-hire Openwork, formerly Meador Staffing, is seeking a skilled welder-fitter TIG Welder who can take a drawing, fit the parts, and lay down code-quality TIG welds on pressure-retaining components. Completed work goes into gage chambers, bridles,water columns, and related assemblies, and it will be inspected and documented. Precision is critical because products are used in pressure-containing applications. Responsibilities • Read and work from fabrication drawings, weld maps, and WPSs, • Fit up pipe, fittings, flanges, and chambers to tolerance, including tacking, alignment, and squaring, • Weld by GTAW (TIG) on carbon steel and stainless steel, plus other alloys as jobs require, • Weld to ASME Section VIII and Section IX requirements, following approved WPS parameters, • Inspect your own work and keep up with visual, dye penetrant, hydrostatic, and radiographic test requirements, • Keep traveler and weld records accurate so traceability stays intact, • Keep your work area clean and safe, and help other shop staff when needed, • Perform all duties assignedQualifications, • Strong TIG welding skills on pipe and plate, • Proven fitting ability, including blueprint reading and use of measuring and layout tools, • Must pass a 6G pipe weld test at QTS expense (for the first test) before any offer is made. (We will allow the candidate to take it a second time at the candidates expense). No exceptions., • At least 2-3 years of pressure vessel, piping, or code fabrication experience (preferred), • Working knowledge of ASME Section IX, plus Section VIII or Section I, • Comfort working with stainless and chrome-moly, and with purge and backing gas practices, • Current continuity log or existing ASME qualifications, • Experience in a high-mix, low-volume job shop, • SMAW or GTAW/SMAW combination experience is a PLUS, • Attention to detail and pride in clean, consistent work, • Able to stand, bend, and work in all welding positions for long stretches, • Able to lift to [80] lbs, • High school diploma or GED, • Reliable attendance and willingness to work regular overtime, • Required PPE must be always worn Schedule Monday through Friday | 6:30 a.m. to 3:30 p.m. 30-minute lunch Regular overtime should be expected as order volume grows. Overtime is paid at time and a half for hours worked over 40 in a week. Occasional early starts or Saturday work may be required to meet ship dates. Why Openwork? Openwork has 50+ years of experience connecting talented people with great employers. We offer a people-first approach and opportunities to grow your career. Apply today atwww.openwork.comand take the next step in your career with Openwork! EOE Openwork is an Equal Opportunity Employer. Apply online on www.openwork.com and call our Clear Lake office at 281-486-1700 to get scheduled for an interview. \nCompany Description Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start. Openwork is a candidate-focused staffing company on a mission to bring ease, accessibility, and thoughtfulness to an industry we’ve held a footing in for 50+ years. We believe there’s more to life than livelihood, but that finding your dream job, career, or team is a really good place to start.

Job Description Panelmatic is seeking an experienced Fabrication Welder Lead to support our fabrication team by providing hands-on leadership, technical guidance, and quality oversight for welding and metal fabrication activities. This position will lead daily fabrication operations, ensure work is completed safely and efficiently, and assist team members in producing high-quality components used in custom control panel assemblies. The ideal candidate is a skilled welder/fabricator with strong attention to detail, the ability to read fabrication drawings, and experience guiding others in a manufacturing environment. This role requires a working leader who is comfortable balancing hands-on production responsibilities with coaching and supporting team members. Job Duties: • Lead daily fabrication activities, assigning work and providing direction to fabrication team members., • Perform MIG welding, TIG welding, and general metal fabrication tasks as required., • Read and interpret fabrication drawings, blueprints, weld symbols, and shop documentation., • Fabricate, fit, and assemble metal components using various hand tools, power tools, and fabrication equipment., • Ensure welds meet quality standards, specifications, and customer requirements., • Inspect completed work for accuracy, workmanship, and compliance with drawings., • Provide guidance, training, and support to fabrication team members., • Assist supervisors with troubleshooting production issues and improving workflow., • Monitor progress to ensure production schedules and deadlines are met., • Promote a safe work environment by following all safety policies and procedures., • Maintain a clean and organized work area following 5S principles., • Communicate production concerns, material shortages, quality issues, and equipment needs to leadership., • Support continuous improvement initiatives to improve efficiency, quality, and productivity. Requirements • 5+ years of welding and metal fabrication experience in a manufacturing or industrial environment., • Previous lead, mentor, or supervisory experience preferred., • Proficient in MIG welding; TIG welding experience preferred., • Ability to weld and fabricate various metals including mild steel, stainless steel, and aluminum., • Ability to read and interpret blueprints, drawings, and fabrication specifications., • Experience using fabrication tools including grinders, drills, saws, clamps, measuring tools, and layout equipment., • Strong understanding of welding techniques, measurements, tolerances, and quality standards., • Ability to work independently while providing direction and support to others., • Strong problem-solving skills and attention to detail., • Preferred Qualifications:, • Experience in electrical enclosure, control panel, industrial equipment, or custom fabrication manufacturing., • Experience with structural steel or sheet metal fabrication., • Experience training or developing less experienced welders/fabricators., • Familiarity with Lean Manufacturing or continuous improvement practices. Testing Requirements: Welding Test Required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Great job opportunity with high pay and excellent working conditions. This job is based in the UK, Successful Candidates will need to relocate to the UK. All Relocation Expenses are paid by the employer. Excellent pay, with over time and lodge, successful candidates will earn $130,000 to $160,000 USD per year. Accommodation is sourced for successful candidates. All information you need is listed below. Only applications which meet the criteria below will be accepted. Introduction: This project is based in South East of England on the UK's largest energy project. There are strict requirements. In order to be eligible for shortlisting for a Trade Test, you must meet the requirements below. Essential Requirements: This job requires experienced Stick and TIG Welders. You must have or be: • Must be a competent Stick and TIG welder., • Minimum 5 years experience., • A Completely Clean Police Record/ Garda Vetting Record. You will not pass the security clearance without it., • Apprenticeship Certificates., • Your CV must be up to date., • Work History - must be up to date and accurate., • References. The Employer: Our client operates within multiple sectors including Oil & Gas, Construction, and Nuclear. Requirements Key Responsibilities: • Read and interpret technical drawings, weld symbols, and specifications., • Perform Stick and TIG welding on various metals, ensuring adherence to project specifications and standards., • Set up welding machines and equipment and maintain them in safe working order., • Conduct quality control checks and inspections on completed welds for conformity., • Collaborate effectively with project teams and other trades to ensure successful project completion., • Maintain a clean and organized work environment, complying with safety regulations and procedures., • Assist in training and guiding less experienced welders when necessary., • Keep accurate records of work completed, materials used, and hours worked. Qualifications and Requirements: • Proven experience as a Stick and TIG Welder in a similar industrial setting., • Valid welding certifications or equivalent qualifications., • Strong knowledge of welding techniques, equipment, and safety standards., • Ability to read technical drawings and blueprints., • Experience working with various metals, including stainless steel, aluminium, and carbon steel., • Excellent attention to detail and a commitment to high-quality work., • Good communication and teamwork skills., • Willingness to work flexible hours and travel to different job sites as needed. Benefits • Outstanding salary in UK, • Excellent pay, with over time and living allowance; successful candidates will earn $130,000 to $160,000 USD per year.

Job Description We’re hiring for a Pressure Vessel Welder / Fitter (TIG) for our Southeast Houston client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: Job Title: Pressure Vessel Welder / Fitter (TIG) Location: Southeast Houston Pay: $27–$35/hr. DOE Hours: Monday–Friday, 6:00 AM–3:30 PM Duration: Temp-to-Hire Duties: TIG weld and fit pipe, flanges, and pressure vessel components. Read blueprints, follow welding procedures, and meet ASME code requirements. Inspect welds and maintain accurate documentation. Maintain a safe, organized work area. Requirements: 2+ years of pressure vessel, piping, or code fabrication experience preferred. Strong TIG welding, pipe fitting, and blueprint-reading skills. Knowledge of carbon steel, stainless steel, and ASME welding standards. Must pass a 6G pipe weld test before an offer. First test paid by client; second attempt at candidate’s expense. Able to lift up to 80 lbs. and work in various welding positions. WHO WE ARE: Carlton Staffing is a locally owned Texas staffing firm with 44+ years of experience connecting great people with great companies. We have established relationships with hiring managers throughout Greater Houston and can help you get your foot in the door with our rock-star clients! Apply today at www.carltonstaffing.com! \nCompany Description Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com. Carlton Staffing is a local staffing firm in Texas with over 44 years of experience! We have connections with numerous hiring managers throughout the greater Houston area. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit www.carltonstaffing.com.

Job Description Pay: $20.00 – $22.00 / hour Type: Full-Time Schedule: Monday – Friday, 6:00 AM – 4:30 PM ( Overtime when production is high) Location: zip- 77064 Overview Seeking a Pipe & Structural Welder capable of welding pipe in all positions (1G, 2G, 5G, 6G) and passing a 2G horizontal flux-core (FCAW) groove weld test on plate. Ideal for motivated welders or recent trade school graduates looking to advance their shop and field skills. Responsibilities • Weld pipe in 1G, 2G, 5G, and 6G positions using GTAW (TIG) or SMAW (Stick) for open roots., • Perform high-deposition fill and cap passes using gas-shielded flux-core (FCAW / dual-shield) on pipe and plate., • Pass a 2G horizontal groove weld test with dual-shield wire to code standards., • Fit, align, bevel, and grind pipe joints and plate assemblies to required tolerances., • Clean and de-slag passes thoroughly to prevent inclusions, porosity, or lack of fusion., • Set machine parameters (voltage, wire feed speed, gas flow) and follow welding procedure specifications (WPS). Requirements • Experience: 1–2+ years of welding experience OR completion of an accredited welding/vocational program., • Testing: Must pass an on-site a 2G FCAW test prior to hire., • Skills: Proficient with angle grinders, cutting torches, and joint layout tools., • Physical: Able to lift up to 50 lbs., work in awkward positions, and follow all PPE/safety rules. For immediate consideration apply online at www.pridestaff.com/houstonnw/jobseekers Then click View Jobs At This Location\nCompany Description Pridestaff is a leading boutique staffing and recruiting firm in Northwest Houston specializing in admin, accounting, and light industrial. PrideStaff has received the staffing industry's highest honor for client service: the Best of Staffing award from loyalty research firm, Inavero. Inavero is our industry's leading provider of independent client and job candidate surveys. Their Best of Staffing award is reserved for the top performing firms; fewer than 1% of all staffing firms in North America. Pridestaff is a leading boutique staffing and recruiting firm in Northwest Houston specializing in admin, accounting, and light industrial. \r\n\r\nPrideStaff has received the staffing industry's highest honor for client service: the Best of Staffing award from loyalty research firm, Inavero. Inavero is our industry's leading provider of independent client and job candidate surveys. Their Best of Staffing award is reserved for the top performing firms; fewer than 1% of all staffing firms in North America.

Job DescriptionSheet Metal Fabricator/TIG Welder Pay: $22-$28/hour Location: Houston, TX Job Type: Temp-to-Hire Schedule: Mon-Fri | 6:00am - 4:30pm (Some Saturdays as needed) The Houston branch of Openwork has partnered with a local manufacturing company to add a Sheet Metal Fabricator/TIG Welder to their growing team. This is a great long-term opportunity for someone with welding experience seeking stability and a long-term career. What You'll Be Doing: Print Reading & Flat Pattern Layout: Read and interpret detailed mechanical schematics, sheet metal flat patterns, bend-allowance notations, and weld symbols; work to precise dimensional tolerances ($\pm$ 1/32" or tighter). Precision GTAW (TIG) Welding: Perform high-quality, defect-free TIG welding on stainless steel (16 ga. to 1/4"), aluminum, and thin-gauge carbon steel. Control heat input, penetration, and puddle size to prevent warping, burn-through, or base-metal discoloration. Secondary Welding (MIG): Operate GMAW (MIG/pulsed MIG) equipment for non-cosmetic or heavier-gauge sub-assemblies when required by project scope. Sheet Metal Forming & Prep: Set up and operate shop sheet metal equipment—including press brakes, shears, plate/pinch rolls, corner notchers, drill presses, and deburring equipment. Fit-Up & Fixturing: Fit, align, and fixture complex assemblies using clecos, sheet metal vise-grips, copper chill blocks, backer bars, and squaring jigs to maintain exact geometry and mitigate thermal distortion. Finishing & Surface Blending: Grind, blend, grain, and polish weld seams using orbital sanders, dynabrade belt files, Scotch-Brite wheels, and pickling/passivation paste to meet food-grade, sanitary, or architectural cosmetic requirements. Quality Assurance: Inspect welded assemblies against flat layouts and assembly prints using dial calipers, height gauges, protractors, and squares. Safety & Bay Upkeep: Maintain argon/shielding gas lines, tungsten grinders, and torch hardware; follow all OSHA guidelines and PPE standards (auto-darkening helmet with appropriate shading, respirators when working stainless/aluminum, safety glasses, leather sleeves). What We're Looking For: • 3+ years of Welding experience (TIG), • 2+ years of sheet metal fabrication experience, • Ability to lift up to 50 lbs, • Knowledge of shop safety in a manufacturing environment, • Knowledge of AWS D1 Standards, • Ability to pass a 3G open root test on 1" plate Why Openwork? For more than 59 years, Openwork has connected talented people with leading employers. We offer competitive pay, weekly pay, opportunities for advancement, and a people-first approach to staffing. We connect driven individuals to long-term careers with reliable companies. Our Houston facility is part of a network of 19 manufacturing sites across 10 states. Apply today to start your next opportunity with Openwork! EOE – Openwork is an Equal Opportunity Employer.

Job Description Panelmatic is seeking an experienced Fabrication Welder Lead to support our fabrication team by providing hands-on leadership, technical guidance, and quality oversight for welding and metal fabrication activities. This position will lead daily fabrication operations, ensure work is completed safely and efficiently, and assist team members in producing high-quality components used in custom control panel assemblies. The ideal candidate is a skilled welder/fabricator with strong attention to detail, the ability to read fabrication drawings, and experience guiding others in a manufacturing environment. This role requires a working leader who is comfortable balancing hands-on production responsibilities with coaching and supporting team members. Job Duties: • Lead daily fabrication activities, assigning work and providing direction to fabrication team members., • Perform MIG welding, TIG welding, and general metal fabrication tasks as required., • Read and interpret fabrication drawings, blueprints, weld symbols, and shop documentation., • Fabricate, fit, and assemble metal components using various hand tools, power tools, and fabrication equipment., • Ensure welds meet quality standards, specifications, and customer requirements., • Inspect completed work for accuracy, workmanship, and compliance with drawings., • Provide guidance, training, and support to fabrication team members., • Assist supervisors with troubleshooting production issues and improving workflow., • Monitor progress to ensure production schedules and deadlines are met., • Promote a safe work environment by following all safety policies and procedures., • Maintain a clean and organized work area following 5S principles., • Communicate production concerns, material shortages, quality issues, and equipment needs to leadership., • Support continuous improvement initiatives to improve efficiency, quality, and productivity. Requirements • 5+ years of welding and metal fabrication experience in a manufacturing or industrial environment., • Previous lead, mentor, or supervisory experience preferred., • Proficient in MIG welding; TIG welding experience preferred., • Ability to weld and fabricate various metals including mild steel, stainless steel, and aluminum., • Ability to read and interpret blueprints, drawings, and fabrication specifications., • Experience using fabrication tools including grinders, drills, saws, clamps, measuring tools, and layout equipment., • Strong understanding of welding techniques, measurements, tolerances, and quality standards., • Ability to work independently while providing direction and support to others., • Strong problem-solving skills and attention to detail., • Preferred Qualifications:, • Experience in electrical enclosure, control panel, industrial equipment, or custom fabrication manufacturing., • Experience with structural steel or sheet metal fabrication., • Experience training or developing less experienced welders/fabricators., • Familiarity with Lean Manufacturing or continuous improvement practices. Testing Requirements: Welding Test Required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionDescription: About U.S. Bellows U.S. Bellows, a division of Piping Technology & Products, Inc. (PT&P), is a leading manufacturer of engineered expansion joints and bellows for piping systems. Serving industries such as oil & gas, power generation, and chemical processing, U.S. Bellows is known for precision fabrication, quality workmanship, and reliable solutions that protect critical infrastructure. Position Summary The Fitter/Welder – TIG & Flux Core is responsible for fitting, aligning, and welding metallic bellows, expansion joints, and related components in accordance with engineered drawings, Welding Procedure Specifications (WPS), and applicable codes. This role requires strong fitting skills, proficiency in TIG and Flux Core welding, and a high level of attention to detail to produce high-quality, code-compliant assemblies. Key Responsibilities • Fit, assemble, and weld bellows and expansion joint components, including convolutions, pipe ends, flanges, liners, and hardware, • Read and interpret fabrication drawings, blueprints, weld symbols, tolerances, and specifications, • Perform proper fit-up for welding, including joint preparation, alignment, and root openings, • Weld using GTAW (TIG) and FCAW (Flux Core) in accordance with approved WPS, • Produce high-quality, multi-pass welds meeting ASME and customer requirements, • Measure, mark, cut, grind, and prepare materials for fabrication, • Maintain required preheat and interpass temperature controls when applicable, • Support and pass NDE inspections (PT, MT, RT, UT as required) and perform approved weld repairs, • Verify dimensional accuracy and alignment before and after welding, • Safely operate hand tools, power tools, fixtures, forklifts, and overhead cranes, • Complete travelers, weld logs, and traceability documentation, • Follow all safety, quality, and housekeeping standardsRequirements: Qualifications • High school diploma or GED required, • Must pass company-administered welding and fitting tests, • Must pass company-administered measuring tape skills test, • 3+ years of welding and fitting experience in a manufacturing or fabrication environment, • Proficient in TIG (GTAW) and Flux Core (FCAW) welding, • Experience welding carbon steel and stainless steel (Inconel a plus, if applicable), • Ability to read, write, and interpret fabrication drawings and production documentation in English, • Strong attention to detail, safety awareness, and teamwork skills, • Ability to work in a fast-paced, team-oriented manufacturing environment Physical Requirements • Ability to stand for prolonged periods (8+ hours), • Ability to lift, push, pull, or carry up to 50 lbs independently, • Frequent bending, stooping, reaching, and manual handling of materials, • Good hand-eye coordination and manual dexterity, • Visual acuity to read measuring tools, drawings, and identify weld or fit-up defects, • Ability to wear required PPE, including steel-toe boots, gloves, safety glasses, and hearing protection, • Must pass initial and ongoing occupational health screenings as required Work Environment Manufacturing shop environment with exposure to moving mechanical parts, sharp materials, heat, dust, and moderate to loud noise. Work schedules may include overtime or weekend shifts based on production demands.

Job Description Position Summary: This position is primarily responsible for a certified welder for welding and assembly/fabrication of Headworks products for the water industry. Essential Job Functions • Performs MIG or TIG welding duties, • Welds steel and stainless steel fabricated parts consistent with Headworks standards and specifications., • Records all time on the appropriate job orders at a high degree of accuracy., • Performs all job duties at a high level of efficiency and with minimal rework., • Works safely and accident-free along with aiding co-workers to engage in safe work habits. Requirements • High School Diploma or equivalent., • Proficient at MIG and or TIG welding processes., • Must have 3+ years TIG/MIG welding (including using a turntable) of Pipe and structural components., • Has passed at least one of HWI’s approved AWS D1.6 welding qualification tests and understands fabrication drawings., • Able to read drawings, weld notations, and fabricate parts to specification., • Team player interested in a long-term position in an industry not subject to recessions. Benefits Headworks® is an equal opportunity employer, offering a great work environment, challenging career opportunities, professional training and competitive compensation. Our shop employees have Fridays off. The work days are Monday through Thursday, 10 hours plus lunch break each day.

Job Description Welder III – Advanced Welding Location: Houston, TX 77066 Pay Rate: $40.00–$45.00 per hour Employment Type: Full-Time, Regular Department: Production Job Summary We are seeking an experienced Welder III to perform advanced welding and fabrication work. The ideal candidate will have at least five years of welding experience, proficiency in multiple welding processes, and the ability to interpret blueprints and engineering drawings. This role requires a strong commitment to quality, safety, productivity, and teamwork. Key Responsibilities • Perform advanced welding using FCAW, GMAW, SMAW, GTAW (TIG), and SAW processes., • Interpret blueprints, welding symbols, and engineering drawings to complete work according to specifications., • Set up welding equipment and adjust machine settings based on job requirements., • Perform precision welding on structural components, machinery parts, and custom fabrication projects., • Inspect completed welds for quality, consistency, and compliance with applicable codes and standards, including AWS standards., • Identify and correct welding defects such as porosity, cracking, and distortion., • Maintain accurate welding logs, time records, and quality control documentation., • Provide guidance and mentorship to less experienced welders and apprentices., • Work independently with minimal supervision while taking ownership of work quality., • Follow established welding procedures, safety guidelines, and production requirements. Required Qualifications • Minimum of 5 years of welding experience., • Strong understanding of welding processes, procedures, and equipment., • Experience with FCAW, GMAW, SMAW, GTAW, and SAW welding processes., • Ability to read and interpret blueprints, welding symbols, and engineering drawings., • Ability to set up equipment, adjust welding parameters, and troubleshoot welding defects., • Strong attention to detail and commitment to quality workmanship., • Ability to work independently and support team productivity. Preferred Qualifications • High school diploma or equivalent., • Vocational welding diploma or formal welding training., • Experience mentoring or assisting less experienced welders. Work Environment • Industrial production and fabrication environment., • Exposure to heat, welding fumes, noise, vibration, oils, and moving machinery., • Requires physical stamina and the ability to perform heavy work, including lifting or exerting force as required by the job., • Must be able to follow all applicable workplace safety procedures. Compensation $40.00–$45.00 per hour, depending on experience and qualifications. Apply Today! If you have advanced welding skills, experience with multiple welding processes, and a commitment to producing high-quality work, we encourage you to apply for this opportunity. \nCompany Description ProSource People is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve. ProSource People is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.

Job Description Pipefitter and TIG Welder Pay: $25 per hour, DOE Shift: Day shift Location: Pasadena, TX Integrity Trade Services is hiring a Pipefitter with TIG Welding experience to start IMMEDIATELY at $25/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities Cut, thread, and hammer pipe to specifications using saws, torches, and pipe threaders Attach pipes to walls, structures, and fixtures with brackets, clamps, or welding Measure and mark pipes for cutting and threading Plan pipe system layout, installation, or repair according to specs Modify, clean, and maintain pipe systems and related equipment Perform TIG welding on steel and metal components according to blueprints, work instructions, and weld specifications. Read and interpret blueprints, weld symbols, and fabrication drawings to ensure accurate production. Set up and adjust welding equipment, including gas flow, voltage, and machine settings. Inspect completed welds for quality, strength, and compliance with required standards. Maintain an organized and safe work area Be adaptable to working across multiple facility locations within Pace’s geographic layout Keep detailed documentation such as logs, manuals, blueprints, and inventory records Conduct routine inspections and calibrations ensuring systems operate efficiently and safely Qualifications High school diploma or GED; technical training or certifications preferred Experience working in maintenance with a chemical batch plant highly preferred At least 2-3 years of related experience High school diploma or equivalent Ability to lift up to 50 lbs and stand for long periods Must pass a TIG weld test Experience with Tools required for pipe fitting Skills Instrument Technician Pipe fitting, layout, and installation Welding and torch cutting Pipe threading, bending, and support installation Pipe system inspection and modification Use of hand and power tools Why choose Integrity Trade Services At Integrity Trade Services, we value our employees by offering a competitive weekly paycheck and a comprehensive benefits package, including medical, dental, and vision insurance. Join a reputable company that prioritizes safety, fairness, and career development. Interested? Click Apply and check your email for follow-up instructions to complete your candidate profile with us. Please call or text Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #ZR #HIGH1

Job Description Clayton Services is searching for a Welder to join a thriving industrial organization in the Houston area. The Welder will be responsible for performing MIG, TIG, and Stick welding on structural components, piping, and other equipment while ensuring all work meets applicable specifications, procedures, and quality standards. Job Type: Temp-to-Hire Pay Rate: $25.00 - $37.50/hour Schedule: Four 10-hour shifts. Monday through Thursday or Tuesday through Friday, 7:00 AM - 5:30 PM Benefits: Medical, dental, vision, 401(k) with company match, PTO, and additional benefits available upon permanent hire. Welder Responsibilities: • Perform MIG, TIG, and Stick welding on piping, structural components, equipment, and other materials., • Read and interpret blueprints, drawings, and welding specifications., • Determine appropriate welding processes, positions, and techniques based on the material and application., • Select, set up, and properly operate welding equipment., • Perform welding in accordance with applicable procedures and specifications., • Inspect completed welds to ensure quality and conformance with established standards., • Use plasma cutting equipment to cut, trim, and prepare metal components., • Follow established safety procedures and maintain a clean and organized work area. Welder Skills and Abilities: • Strong MIG, TIG, and Stick welding capabilities., • Ability to read and interpret WPS (Welding Procedure Specifications) and PQR (Procedure Qualification Records)., • Ability to read and work from blueprints and technical drawings., • Knowledge of welding equipment, materials, processes, and safety practices., • Ability to produce consistent, high-quality welds in an industrial environment., • Ability to work independently and as part of a maintenance or operations team., • Must be able to perform the physical requirements associated with industrial welding work. Welder Education and Experience: • Minimum of 5 years of welding experience required., • AWS welding certification required., • Must be capable of successfully completing a minimum 3G plate weld test or other applicable weld test based on the work being performed., • Industrial, manufacturing, terminal, chemical, or process facility experience preferred. Welder - Immediate need. Apply today!

Job Description Location: Pasadena, TX Job Type: Full-Time | Hourly (Non-Exempt) Position Summary Haygor Instrument & Company is seeking an experienced Welder to join our manufacturing team. This position is responsible for fabricating and repairing metal components by reading blueprints, setting up materials, and performing high-quality welds using a variety of welding techniques. The ideal candidate takes pride in precision workmanship and maintaining a safe, efficient work environment. Key Responsibilities • Read and interpret blueprints, technical drawings, and specifications., • Set up and prepare materials for welding operations., • Perform manual and semi-automatic welding on metal components., • Inspect completed welds for quality and structural integrity., • Repair and fabricate metal parts as needed., • Maintain welding equipment and ensure a safe, organized work area., • Follow all safety procedures and quality standards.Qualifications, • High school diploma or equivalent required., • 5–10 years of welding experience preferred., • Experience with TIG, MMA, and other welding processes., • Ability to read technical drawings and use measuring tools., • Strong attention to detail and commitment to quality., • Professional welding certification is a plus., • Ability to work independently and as part of a team.Why Join Haygor? Join a growing manufacturing company where craftsmanship, safety, and quality are valued. At Haygor Instrument, you'll work on precision industrial products while being part of a team committed to excellence and continuous improvement. Powered by JazzHR iqpiqyam3q

Job DescriptionJob Title: Welder Location: Pearland, TX (Onsite) Duration: 6 Months Contract Pay Range: $20.00 - 24.63 Per hour Job Description: • Perform welding tasks in the manufacture of products to conform with specifications and certification requirements, • Weld production and more difficult prototype instrumentation piece parts in various materials including stainless steel., • Precious and semi-precious metals using various types of welding processes which may include TIG and/or MIG, • May operate program welding machine to weld production units, • Set up fixtures and Client out work for production and prototype piece parts, • Trouble shoot problem welding areas, • May train other welders and/or provide welding support to others as needed, • May work with various internal departments to establish welding process parameters, • Welds must pass destructive and non-destructive testing based on certification requirements per individual product, • Participate in continuous improvement processes, • Recommend changes to and participate in the review of manufacturing procedures, • Perform daily organization and cleanup of work area, • Follow safety guidelines and report unsafe conditions and incidents to supervision, • Perform work of a miscellaneous nature as required Must Have: • Three (3) years of related welding experience, • Must obtain and maintain individual welding qualification and certification per product requirements, • Trouble shoot problem welding areas, • Previous experience with TIG and/or MIG, • Welder must pass destructive and non-destructive testing based on certification requirements per individual product

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary Panelmatic Inc. is seeking an experienced and hands-on Base Fabrication Lead to support daily fitting and welding operations within the Base Fabrication department. The Base Fabrication Lead will work closely with the Fabrication Supervisor to coordinate daily activities, assign work, monitor production progress, and ensure fabricated components meet quality and dimensional requirements. The ideal candidate has strong hands-on experience in metal fabrication and welding, the ability to read and interpret blueprints, and demonstrated leadership skills. This position serves as a working lead and is expected to actively participate in fabrication and welding activities while providing guidance and support to team members. Job Duties • Assist the Fabrication Supervisor with coordinating daily fitting and welding activities within the Base Fabrication department., • Provide day-to-day direction, guidance, and support to fitter/welder fabricators., • Assign work based on employee skill levels, project requirements, and production priorities., • Monitor employee progress and communicate production status, concerns, and delays to the Fabrication Supervisor., • Work hands-on with the team to fit, weld, cut, grind, drill, and assemble fabricated components., • Read and interpret blueprints, fabrication drawings, weld symbols, and other technical documents., • Ensure fabricated components are assembled accurately and meet required dimensions and specifications., • Verify proper material, measurements, fit-up, weld placement, and overall workmanship throughout the fabrication process., • Assist team members with difficult fabrication, fitting, and welding tasks., • Inspect completed work and identify defects, dimensional issues, or other quality concerns., • Communicate fabrication issues and recommend solutions to the Fabrication Supervisor., • Assist with troubleshooting production problems and minimizing rework, material waste, and downtime., • Help ensure employees follow established safety procedures, company policies, and proper equipment operating practices., • Promote a safe, clean, and organized work environment., • Assist with training and mentoring new and less-experienced fabrication employees., • Help monitor production schedules and ensure work is completed according to established deadlines., • Coordinate with other departments as needed to support production requirements., • Assist with maintaining proper tools, equipment, and materials needed for daily fabrication operations., • Ensure fabrication equipment is properly operated and report maintenance or equipment issues to the appropriate supervisor., • Support continuous improvement efforts to improve productivity, quality, safety, and efficiency., • Maintain accurate production and work-related records as required., • Perform other duties as assigned. Requirements • 3+ years of experience in metal fabrication, fitting, welding, or a closely related manufacturing environment., • Previous experience as a Lead, Senior Fabricator, Welder, Fitter, or similar leadership role preferred., • Strong hands-on knowledge of metal fabrication and welding processes., • Ability to read and interpret blueprints, fabrication drawings, weld symbols, and schematics., • Experience with structural steel, sheet metal, and other metal materials., • Proficiency operating common fabrication equipment, including welders, plasma cutters, saws, grinders, drills, and related machinery., • Knowledge of MIG/GMAW, TIG/GTAW, and/or SMAW welding processes preferred., • Ability to accurately measure and inspect fabricated components using tape measures, squares, levels, calipers, and other measuring tools., • Strong understanding of proper fit-up, weld quality, dimensions, and fabrication tolerances., • Ability to provide direction and guidance to other employees while maintaining a positive and productive work environment., • Strong communication and interpersonal skills., • Ability to identify and resolve fabrication and production issues., • Strong attention to detail and commitment to quality workmanship., • Ability to prioritize tasks and work effectively in a fast-paced manufacturing environment., • Knowledge of workplace safety practices and OSHA standards., • Basic computer skills preferred., • High school diploma or GED preferred., • Welding certifications, such as AWS D1.1, are preferred but not required., • Ability to work overtime and adjust schedules based on production demands. Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionDescription: Title: Welder Location: Houston, TX, 77073 Duration: 0-12+ Months Shift: 6:00am to 2:30pm Monday - Friday (OT as needed) Pay: $22/hour - $26/Hour Description • The Welder will be required to carry out cladding on machined parts to a high degree of quality, and work on his/her own initiative to meet the production schedule of the plant., • The role will require the ability to weld many different types of components related to Gas and Steam turbine repairs., • This position may be required to flex between first and second shift as needed. As a Welder, you will be responsible for:, • Performing visual and in-process inspections in accordance with API and ISO quality specifications., • Reading and understanding engineering drawings & specifications., • Overlay of components using Tig & MiG per weld procedures., • Setting up and welding components within the parameters of the specific weld procedure., • Detailing grinding of components after weld repairs., • Adhering to Company Safety and Environmental policies., • Adhering to Company quality procedures. Qualifications/Requirements • High School Diploma or equivalent diploma. 7+ year experience., • Experience of using foot control tig and MiG machines., • Preference would be to have experience with SMAW & GMAW welding procedures., • Experience of manual TIG., • Advanced degree can be substituted for experience. Essential Requirements of the Role • 7+ years experience TIG and Mig experience, experience with SMAW & GMAW. Desirable Attributes, • Hard worker, driven, confident, ability to work independently. Soft Skills, • Carry out cladding on machined parts to a high degree of quality, and work on his/her own initiative to meet the production schedule of the plant., • The role will require the ability to weld many different types of components related to Gas and Steam turbine repairs. Tools or Software, • TIG & MIG. Education, • High School Diploma or GED. Employee Benefits: At LanceSoft, full-time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: • Four options of medical Insurance, • Dental and Vision Insurance, • 401k Contributions, • Critical Illness Insurance, • Voluntary Permanent Life Insurance, • Accident Insurance, • Other Employee Perks EEO Employer LanceSoft is a certified Minority Business Enterprise (MBE) and an equal-opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. LanceSoft makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description Welder Daily Thermetrics is seeking an experienced Welder to join our rapidly growing welding and production team. A Welder is responsible for assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape. Duties include reviewing blueprints, cutting metal into the appropriate shape and smoothing molten metal to remove creases. The successful Welder will ensure that projects are completed safely and accurately, and in a timely manner to meet stringent QA, ISO, customer and work order requirements. This is a welder position in an ISO Certified manufacturing/fabrication facility. This is not an entry-level welder position. 6G Welding Assessment and INCO Assessment testing will be required Responsibilities: • Design optimal work flow by working with manufacturing engineering and fabrication departments for assigned weld projects, • Expertly welds small, medium, and large components of various metals and alloys., • Read and comprehend technical drawings, blueprints, schematics, • Excellent communication skills, both verbal and written, • Knowledge of metallurgy, • Knowledge of various welding techniques, including GTAW TIG, MIG, and oxy-fuel welding, • Knowledge of manual and mechanical welding techniques, • Determining the appropriate welding equipment or method based on requirements, • Setting up components for welding according to specifications, • Document welding processes that meet engineering product requirements, quality standards, and safety requirements., • Maintain equipment in a condition that does not compromise safety and maintains responsibility for all tools and equipment assigned., • Demonstrate continued high-caliber performance and improvement to reduce errors, Scrap, waste to improve and reduce labor and material costs., • Coordinate work with multiple disciplines including engineering, designers, drafters, welders, and other production staff Qualifications: • Graduation from high school, vocational school, recognized craftsman apprenticeship program or equivalent, • At least one (1) to three (3) years of Proven experience as welder, • Experience, working in a manufacturing/fabrication or machine shop environment, • Ability to read and interpret technical drawings and documents such as WPSs, PQRs, WPQs, • Excellent technical communication skills, • Ability to work independently, • Have a strong mechanical aptitude and strong attention to detail, • Understanding of ASME codes and NDT processes, • Understanding of GD&T and welding symbols, • Experience using a variety of welding equipment and procedures (TIG, MMA etc.), • Experience in using electrical or manual tools (saws, squares, calipers etc.), • Knowledge of relative safety standards and willingness to use protective clothing (helmet, face-shield, gloves, etc.) • Professional Certification (e.g. an AWS welding certificate) will be a plus, • Self-driven initiative to respond to fluid work environment and rapidly changing priorities Employment Details: • Full-Time., • On-Site, In-Person in a dynamic manufacturing environment, • will be assigned to either production first shift or second shift, • Will work closely with engineering and design team, • Reports to Production shift supervisor. Employee Benefits: • 100% Company paid Employee Only HDHP Medical., • 100% Company paid Life Insurance., • 401K with Employer Match., • Medical Plan options available (two medical plans, dependent/family coverage options), • Health Savings Account with Employer contribution., • Flexible Savings Account., • Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans. Other: • Must be legally authorized to work in the United States for any employer other than current employer, • Must be fluent in English with ability to communicate highly technical terms/ideas; any other language skills are beneficial, • This is a physically active position, which requires the physical ability to work in a busy shop/warehouse environment including sitting, standing, lifting/moving 50 pounds, or up to 100 pounds, frequently. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Production positions may be assigned to either of the following full-time work schedules: Production First Shift Monday – Friday 05:00 am – 1:30 pm Production Second Shift Monday – Friday, 1:30 pm – 10:00 pm

Job Description McCorvey Sheet Metal is a family-owned manufacturing & construction company seeking highly qualified, skilled sheet metal ductwork welders and installers to join our team! Hiring immediately and providing room for growth. If you have experience with assembling, installing, and welding sheet metal ductwork, we want to meet you! Welders provide their own welding hood, but the company will provide any special PPE for special welding needs, such as welding gloves and vests. McCorvey Sheet Metal primarily performs on larger projects such as hospitals, research labs, sports stadiums, schools, and many other vertical markets. MUST BE WILLING TO TRAVEL Job Responsibilities • We are looking for a technically skilled welder with good attention to detail. Will weld galvanized, aluminum, black iron, 304 and 316 stainless steel with TIG & MIG procedures, • Utilize and interpret blueprints to determine how and where to fabricate, assemble and install sheet metal ductwork., • Use hand and power tools to trim, buff, smooth, file, and grind metal surfaces and joints of parts that have been assembled to ensure safety and a seamless appearance., • Install assemblies, including pipes, HVAC ductwork, exhaust stacks, etc., • Ensure that efficiency is maximized while fabricating and installing HVAC systems., • Verify the appropriate type and gauge of sheet metal to be used in projects according to specifications., • Ensure safety is a priority on the job during all activities, including using tools and installing and welding ductwork. Requirements:, • Sheet metal ductwork welding and installation 5+ years, • High school diploma or GED, • Must pass a drug screen, background, and physical., • Basic math skills, • Provide own welding hood and sheet metal ductwork tools.Tools:, • Welding hood, • Sheet metal hammer, • Snips, • Cheaters, • Hand tongs, • Tape measure, • Basic hand toolsPerks of the Trade:, • Medical, Dental, and Vision, • Paid Holidays, • Weekly Pay, • 401K, • Profit Sharing

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking Combination Welders with Rope Access - Level I, Level II, or Level III certification in the Houston, TX area. The Welder position lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: • Minimum of a High School Diploma or equivalent, • IRATA / SPRAT Level 1, Level 2, or Level 3 certification, • TWIC Card preferred, • Must be able to pass a weld test before being hired, • Must be certified as a welder, • Must have a capacity for work at height, • Must possess excellent communication, interpersonal, organizational, and problem solving skills, • CPR certification, • Post offer drug / alcohol screen, physical evaluation, and signed acceptance of the company Drug, Alcohol and Contraband Policy, • Comply with company and client job site safety requirements, • Must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Uses Industrial Rope Access methods and related equipment to access and complete a wide variety of maintenance, repairs and other industrial work tasks while suspended on ropes or in difficult access areas; responsibilities may also include rescue operations, technical reports, and administrative tasks; selects equipment and plans layout, assembly, and welding; lays out, positions, aligns, and fits components together; bolts, clamps, tacks parts to secure in position for welding; sets up equipment and welds parts; may assemble parts by bolting and riveting; may weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, tig, etc.; may weld pipe, sheet metal, structural steel, brackets, or other materials; may repair products by dismantling, straightening, reshaping, and reassembling parts; may use cutting torch to cut materials and demo existing assemblies; perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; typing / data entry; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: NDT technician, inspection, rope access, welder, combo welder Job Posted by ApplicantPro

Job Description We are looking for skilled welders with hands-on aluminum MIG welding experience using either a push-pull gun or a spool gun. The right candidate will be proficient in MIG and TIG welding across steel, stainless steel, and aluminum, with experience in pipe welding, machine setup, and forklift operation. A weld test will be required onsite. • Three welders for the night shift, from 3:00 p.m. to 1:30 a.m., • Three welders for the day shift, from 5:00 a.m. to 3:30 p.m. No phone calls, emails or agencies please.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.010 and/or .5% angular. Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrication such as port alignment, scribing, cutting/coping, tacking, tuning and welding while maintaining angular tolerance's of +/- %, focal lengths and target points of +/- .010; closely collaborate with machinists throughout the manufacturing process for each phase of the project. Must be able to use Argon gas and TIG Welding procedures to connect metal components Must be able to position and clamp metal components for welding. Able to perform fusion weld, fillet welds and butt weld with full penetration. Must know the proper weld settings for welding various materials along with filler rod selection. Must be able to produce vacuum tight welds in hard-to-reach areas of chambers. Ability and understanding of how to identify the proper order of operations (identifying the main datum point / sequence of hole penetration) Must pay close attention to details on blueprints. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to take direction from supervisor. Ability to focus attention on details.