Trabajos tooling engineer en Buffalo, New YorkCrear alertas

Job DescriptionRole Summary This role is responsible for operating and maintaining up to two precision grinding or machining systems including ancillary automation, auto gages, and wash equipment — while consistently meeting quality and productivity standards. The operator performs setups ranging from basic to advanced, conducts in-process inspections using calibrated gages, and carries out planned preventive and minor corrective maintenance. Key Responsibilities Maintain a safe and clean work area per 6S standards. Refer unusual or unsafe conditions to supervisor. Know appropriate level of shop math as required. Read and understand blueprints. Inspect work produced and show a genuine interest in producing quality work. Setup inspection gages such as Etalon Micrometer and profilometer. Have most of the tools of the trade. Operate and maintain (2) two machines with high standards of quality and quantity; (2) two grinders or (1) one grinder and (1) one broach or assembly machine. Operate and maintain ancillary equipment such as loader(s) (automation, robots), auto gage(s), and wash(s) (rinse, wash, rust inhibit) with high standards of quality and quantity. Hand load and hand pack. Take full swarf carts to processing area and bring empty swarf carts back to machines. Perform minor machine maintenance. (Planned Operator Maintenance and Preventive Maintenance) Maintain the Henry System, such as changing paper, checking fluid levels and fluid concentration. Recognize problems, correct them and make recommendations on how to prevent them to your supervisor or support engineer. (Machine, Material, Tool) Have a thorough understanding of speeds, feeds and tooling. Set-up basic jobs within a reasonable length of time without assistance. Set-up advanced jobs within a reasonable length of time with assistance. Maintain proper documentation and communications to ensure efficient coordination between shifts and departments (e.g. quality, engineering, maintenance) Orient when requested by supervisor. Lead when mutually agreed. Comply with all Quality Management System procedures and work instructions. Perform other related duties as requested by supervisor.

Job Description We are looking for a Tool Engineer to join our growing company. Our customers drive the work we do We empower our employees to deliver best-in-class service. This position plays an integral role in supporting our manufacturing team. You are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. As an employee, you are well-compensated, receive paid time off and healthcare coverage. Responsibilities:  Act as the point of contact to resolve problems related to tooling impacting the manufacturing  Work with resources to resolve tooling issues related to safety, quality, throughput, or costs  Generate and implement ideas to reduce tool costs and overall manufacturing costs  Work with internal teams to ensure tooling issues don’t interrupt production  Manage weekly tooling spend against a variable piece cost budget  Perform and document tool trials using GMPT tool test forms and PPCR  Revise and update tool drawings and documentation as required  Develop new systems to recondition and reuse tooling when economically feasible  Attend operations and team problem-solving meetings  Support manufacturing addressing tooling issues contributing to high manufacturing costs, scrap rates, and low production  Assist cross-functional teams in achieving overall plant metrics  Recommend optimized machining processes and cutting parameters  Introduce new technology and improved tooling designs  Develop and provide year over year Cost per Piece reduction plans  Work with the preset team to implement proper tool setup techniques  Maintain PFEP and utilize PFEP & Top Spend Data to initiate savings projects  Follow the ACD process.  Adhere to customer safety requirements and customer tool test procedures  Complete the required cost savings/tool test documentation  Report and document non-conformances, CARs, near misses, incidents, and continuous improvements to the Site Manager and participate in any investigations  Maintains safety and acceptable housekeeping standards for the site  Make decisions within the limits of general standards or procedures  Perform other duties as assigned Requirements:  Able to work with little to no supervision and ability to multitask  Strong interpersonal, leadership, and organizational skills  Good written, oral communication skills, computer and system knowledge  Ability to work well with others, always exhibiting teamwork  Engineering degree  Five years’ experience preferred

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a Tooling & Die Engineer. The Tooling & Die Engineer will be responsible for technical oversight for all tooling and die-related activities supporting press operations. Responsible for tooling design, optimization, troubleshooting, quality improvement, and continuous enhancement of manufacturing processes to support safe operations, customer satisfaction, production efficiency, and business growth. This role is located in Buffalo, NY and will be fully on-site. Hours: Split Shift (6am-4pm/4pm-2am) Base Salary Range: $77,000-$90,000 May be eligible for a variable compensation plan bonus based upon company performance within fiscal year cycle. At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include but are not limited to years of experience, industry knowledge, technical skills, education, qualifications, etc. Responsibilities Tooling & Die Engineer Responsibilities: • Design, develop, modify, and optimize tooling, dies, fixtures, and press set-ups to support safe, efficient, and cost-effective manufacturing operations., • Troubleshoot and resolve tooling, die, equipment, and process-related issues that impact safety, quality, productivity, scrap rates, or machine uptime., • Analyze tooling performance and implement design improvements to increase tool life, improve part consistency, reduce downtime, and lower manufacturing costs., • Collaborate closely with Operations, Quality, Maintenance, Production Planning, and Engineering teams to ensure tooling designs support production requirements and customer expectations. This includes any design element collaboration with East Alton tooling designers., • Lead root cause investigations related to product defects, dimensional issues, tooling failures, scrap, and process variation, implementing permanent corrective and preventive actions., • Support new product introductions, customer requirements, and process changes through tooling design, development, validation, and production launch activities., • Coordinate die tryouts, production trials, capability studies, sample submissions, and process validations to ensure tooling meets operational and customer requirements., • Develop and maintain tooling standards, engineering drawings, specifications, setup documentation, and revision controls to ensure accurate and repeatable manufacturing processes., • Review manufacturing processes and tooling designs for manufacturability, quality, safety, reliability, and efficiency improvements., • Monitor tooling performance metrics, including tool life, quality performance, maintenance requirements, downtime, and operating costs, and recommend improvement opportunities., • Provide technical guidance and training to production personnel, setup technicians, and maintenance teams on tooling operation, troubleshooting, and best practices., • Support preventive and predictive maintenance programs by identifying tooling wear patterns and recommending refurbishment, replacement, or redesign strategies., • Ensure all tooling designs comply with customer specifications, engineering standards, product quality requirements, and applicable regulatory requirements., • Participate in continuous improvement initiatives focused on quality enhancement, process stability, waste reduction, productivity improvement, and operational excellence., • Collaborate with suppliers and external toolmakers regarding tooling design, fabrication, modifications, repairs, and performance improvement activities., • Oversee departmental engineering projects including machine installation, equipment modifications, process improvements, capital projects, and decommissioning activities., • Support quality management system requirements including APQP, PPAP, FMEA, Control Plans, corrective actions, and customer quality initiatives where applicable., • Drive operational excellence by aligning tooling design and performance with production throughput, quality objectives, cost targets, and customer delivery expectations., • Properly manage inventory and inventory tracking. Tooling & Die Engineer Qualifications: • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes including batteries and lamps, as well as spent aerosol cans (HW)., • BS Degree- Mechanical Engineering or Technical Areal, • 10 years in stamping environment. AutoCAD proficiency and design background preferred. Qualifications Joining Wieland’s team gives you… • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Description We are looking for a Manufacturing Engineer to join our growing company. Our customers drive the work we do, and we empower our employees to deliver best-in-class service. As part of our team, you are responsible for identifying new methods, resolving problems, achieving cost savings, and working with internal teams to ensure production runs smoothly and safely. Our ideal candidate has a bachelor’s degree in mechanical engineering or a related field, professional experience within a manufacturing and design environment, and strong problem-solving and math skills. We will not consider candidates who require sponsorship or relocation. Responsibilities: • Act as the single point of contact to resolve tool-related problems in manufacturing, • Coordinate with the plant to resolve safety, quality, throughput, or cost issues related to tooling, • Generate and implement cost savings ideas to reduce tool and manufacturing costs, • Manage weekly tooling spend against a variable piece cost budget, • Perform and document tool trials and adhere to customer tool test procedures, • Revise and update tool drawings and documentation as required, • Develop new systems to recondition and re-use tooling when economically feasible, • Attend regularly scheduled operations and team problem-solving meetings, • Assist team in resolving machining and tooling-related issues relating to costs, scrap rates, and low production rates, • Support cross-functional teams to achieve overall plant metrics, • Recommend optimized machining processes and cutting parameters, • Introduce new technology and improved tooling designs, • Provide year-over-year cost per Piece reduction plans, • Coordinate with the preset team on proper tool setup techniques, • Maintain PFEP and use PFEP and Top Spend Data to initiate savings projects, • Complete required cost savings and tool test documentation, • Report and document non-conformances, CARs, and continuous improvements, • Maintain safety and good housekeeping standards for the site, • Make decisions within the limits of general standards or procedures, • Report near misses and incidents to the site manager and cooperate with investigations, • Other duties as assigned Requirements • 5 years of experience working in production machining, a bachelor’s degree in mechanical engineering, or experience working in a closely related technical field is preferred, • Prior experience designing and tooling parts in a manufacturing environment, • Strong math and problem-solving skills and ability to read blueprints and schematics, • Proficiency with computers, • Able to work with little to no supervision and ability to multitask, • Strong interpersonal, leadership, and organizational skills, • Good written and oral communication skills, computer and system knowledge Benefits • Paid time off and holiday pay, • Medical, dental, and vision benefits on your 1st day of employment

Job Description Project-Based Launch Process Engineer Overview: • Project-based with defined scope, timeline, and hours; hourly pay rate: $50.00, • Assist with process launch in machining environments focusing on crankshaft machining for automotive engines, • Focus: rotating equipment (CNC, grinders, spindle systems), • Manage run-offs, validations, and production readiness Responsibilities: • Lead machine runs off (cycle time, capability, quality), • Execute Run Rate, validation, and pre-production builds, • Support install & debug of rotating machine tools, • Develop processes for crankshaft machining (turning, grinding), • Set/optimize feeds, speeds, cycle times, • Experience with carbide machining inserts and able to propose alternatives to improve quality and/or throughput, • Troubleshoot vibration, runout, tool wear, finish issues, • Drive OEE, scrap, cycle time, Cp/Cpk improvements, • Support PFMEA, Control Plans, PPAP, • Partner with production, maintenance, tooling, suppliers, • Ensure safe operation of rotating equipment Qualifications: • Experience with crankshaft manufacturing, machining, and rotating equipment, • Strong in process validation & capability (Cp/Cpk), • Knowledge of APQP and PPAP, • Read GD&T and prints, • Strong troubleshooting skills Requirements • Engineering degree or equivalent, and Crankshaft experience preferred, • 3–5+ yrs manufacturing and machining experience, • Ability to travel between the United States and Canada

Job DescriptionBenefits: • Health insurance, • Paid time off, • Vision insurance, • 401(k), • 401(k) matching, • Dental insurance Position Summary: The Product Development Engineer is responsible for the industrialization of a new project from initial RFQ to validation during production. They will serve as the primary technical liaison between the Moldtech, potential customers, suppliers, and tooling manufacturers. The Manufacturing Engineer – Development ensures open and constant communication among all stakeholders, and ensures new projects meet quality, cost, and delivery requirements. Exempt: Yes Essential Duties and Responsibilities · Oversee all initial phases of communication with potential new customers, including review of RFQs, design reviews, and generating quotes. · Work directly with customers to understand project requirements, then clearly define all project requirements and communicate to Moldtech team. · Develop project timelines and ensure milestones are achieved on schedule. · Lead design and development of new tooling and processes with the help of internal resources, tooling manufacturers, equipment manufacturers, and the customer. · Support APQP deliverables such as PFMEAs, control plans, and PPAP submissions. · Ensure work instructions, process parameters, and quality requirements are clearly defined and documented for hand-off to production. · Conduct trials for new materials, compounds, and tooling, and validate results before production release. · Assist other initiatives of the Engineering team as directed by management. Qualifications Education & Experience · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or related field; or equivalent experience. · 3–5 years’ experience in mold design, preferably in rubber molding (compression, transfer, injection). · Knowledge of rubber curing, flow, and shrinkage characteristics. Skills & Competencies · Proficient in CAD software (SolidWorks, AutoCAD, or equivalent). · Knowledge of APQP, PPAP, and ISO/IATF quality requirements. · Strong problem-solving and root cause analysis skills. · Excellent communication and organizational abilities. · Ability to manage multiple projects under tight timelines.

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility Position overview GTI Fabrication is seeking a highly experienced and technically proficient Senior Manufacturing Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Senior Manufacturing Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle Key Responsibilities • Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures., • Develop formal manufacturing documentation including process flow diagrams, work instructions, BOMs, routings, CNC programming, and assembly/inspection plans., • Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production., • Translate engineering design requirements into robust and efficient production processes., • Lead new product introduction (NPI) efforts from prototype through full-rate production., • Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts., • Integrate automated and digital manufacturing technologies where applicable., • Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability., • Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility., • Maintain compliance with ISO 9001 standards; support internal and external audits., • Drive root cause analysis and corrective action using tools like FMEA, SPC, and 8D., • Mentor technicians and junior engineers in best practices for manufacturing engineering. Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field., • 8–15 years of experience in manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors., • Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and tolerance analysis., • Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies., • Experience with ERP/MRP systems (NetSuite a plus)., • Demonstrated success in process development, design for manufacturability, and production scaling., • Hands-on experience with containerization, modular product platforms, and structural weldments., • Knowledge of ISO9001 quality systems and compliance standards., • Exceptional analytical, problem-solving, and project management skills., • Excellent communication and interpersonal abilities. Preferred Qualifications: • Experience in containerized HVAC, power distribution, or control system enclosures., • Familiarity with CNC machining, sheet metal fabrication, and industrial coatings., • Certification in Lean Six Sigma, PMP, or related process improvement disciplines., • Experience with CFD/FEA simulation tools. Working Conditions: • This is a full-time onsite position based in Buffalo, NY., • Work takes place in both office and fabrication floor environments., • May require up to 5 % travel to customer sites or GTI facilities., • Must be able to occasionally lift up to 25 lbs and walk fabrication areas Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. Perks & Benefits GTI offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionResponsibilities Maintain a safe and clean work area per 6S standards. Refer unusual or unsafe conditions to supervisor. Know appropriate level of shop math as required. Read and understand blueprints. Know intricate gauging methods, inspect work produced and show a genuine interest in producing quality work. Have most of the tools of the trade. Operate and maintain (2) two machines with high standards of quality and quantity. Operate and maintain ancillary equipment such as, loader(s) (bar loaders), autogage(s), metal cutting machine(s) and wash(s) (rinse, wash, rust inhibit) with high standards of quality and quantity. Hand load and hand pack. Remove, regrind, replace and adjust tools and holders. Take full chip carts to processing area and bring empty chip carts back to machines. Perform minor machine maintenance. (Planned Operator Maintenance and Preventive Maintenance) Recognize problems, correct them and make recommendations on how to prevent them to your supervisor or support engineer. (Machine, Material, Tool) Perform minor machine repairs and adjustments. Have a thorough understanding of speeds, feeds and tooling. Work with engineers and supervisor on layout improvements and changes. Know how to set and adjust standard machine attachments without assistance. Set-up basic jobs within a reasonable length of time without assistance. Set-up advanced jobs within a reasonable length of time with assistance. Maintain proper documentation and communications to ensure efficient coordination between shifts and departments (e.g. quality, engineering, maintenance) Orient when requested by supervisor. Train when mutually agreed. Lead when mutually agreed. Comply with all Quality Management System procedures and work instructions. Perform other related duties as requested by supervisor.

Job Description Allient Inc. is in growth mode and currently seeking a Staff Systems Engineer to join our team at our corporate innovation center and headquarters located in Buffalo, New York! The Systems Staff Engineer leads system-level engineering for customer applications, working closely with leadership, sales, engineering teams, suppliers, and customers. This role supports major multi-site projects built around Allient’s core technologies: Motion, Control, Power, and Lightweighting. Apply now! Responsibilities: • Lead complex system design & analysis across electrical, mechanical, software, actuation, and composite technologies., • Define system architecture from customer requirements and applicable standards., • Manage requirements, including subsystem definitions, derived requirements, tolerances, and traceability., • Use modeling and simulation to verify performance, reliability, safety, and risk mitigation., • Create and manage test plans, procedures, fixtures, and tooling globally., • Perform subsystem testing and support integration into customer vehicles or applications., • Evaluate new and modified product designs to ensure performance meets specifications., • Present technical information to support strategic, multi-site planning., • Review and critique design work from others and promote best practices., • Collaborate directly with customers and internal teams on requirements, project updates, and test results., • Contribute to standard process and procedure development., • Mentor engineers at various levels., • Serve as a technology expert and help guide innovation for products and processes., • Support proposals, including technical definitions, diagrams, and compliance documentation., • Operate with a high degree of independence; only major deliverables require senior review., • Work across multiple projects and locations simultaneously., • Some limited travel may be required (20% typical), • Other duties as needed. Minimum Qualifications: • Bachelor’s degree in electrical, mechanical, or aerospace engineering + 11 years’ experience, or Master’s degree + 9 years’ experience., • Experience with actuation systems (motors, gearing, ball screws, electronics, software)., • Extensive experience using MATLAB and Simscape for dynamic, thermal, and power-flow analysis., • Knowledge of composites/lightweighting preferred., • Experience with military/defense programs or government contracting preferred., • Strong ability to interpret and develop technical instructions, diagrams, and abstract concepts., • Proven technical expertise in one or more engineering disciplines. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit www.Allient.com Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionJob Title: Senior CyberArk Technical EngineerLocation: Buffalo, NYHire Type: ContingentWork Model: Hybrid (4 days a week in the office)Target Pay Rate: $100.00/hourContact Email: bfesmire@imaginestaffing.com No C2C, C2H, 1099 or Visa Sponsorship/Transfers available Nature & Scope: Positional Overview Are you a seasoned Cyber Ark Technical Engineer looking for an exciting new challenge? Join our client’s dynamic team where innovation and excellence are at the core of everything we do. They offer a collaborative and stimulating environment where your expertise will drive cutting-edge projects and shape the future of technology. If you're passionate about pushing the boundaries of technology and want to make a significant impact, we want to hear from you. Apply now! Role & Responsibility:Tasks That Will Lead To Your Success • Work closely with Technology management, customers, and support teams on a regular basis to lead the design, development, and execution of technical solutions that meet or exceed current and future needs of the organization., • Lead the design, deployment, and integration of Privileged Access Management (PAM) solutions., • Customize and configure CyberArk Privileged Cloud to meet organizational needs., • Develop and implement policies, procedures, and practices related to PAM., • Manage and maintain CyberArk, ensuring high availability, scalability, and performance., • Monitor PAM environments for compliance with security policies and audit requirements., • Conduct regular audits and assessments of privileged accounts to ensure compliance with security policies., • Collaborate with internal audit and compliance teams to ensure adherence to regulatory requirements., • Provide guidance and training to internal teams on the effective use of PAM tools., • Primary responsibilities may include infrastructure architecture and design, research and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing., • Regularly and independently interact with business partners of varying associate and management levels to ensure clarity of the problem/opportunity and elicit business requirements., • Estimate the size of the effort required to complete complex, moderate to large scale projects where applicable., • Coordinate vendor interactions and manage contract and/or vendor resources as needed., • Mentor and coach less experienced engineers, technicians, and integrators., • Review documentation, proposals, and changes proposed by less experienced staff., • Seek to expand knowledge and understanding of Financial Services trends, practices, and technologies on a continuous basis., • Follow and promote use of industry best practices, standards and procedures., • Maintain an expert level of technical aptitude and expert working knowledge of supporting application(s), development environments and the supported client environment., • Maintain an expert level understanding of vendor products, services, and future updates. Skills & Experience:Qualifications That Will Help You Thrive, • Minimum Bachelor’s degree in Computer Science or Computer Engineering., • Minimum 12 years advanced experience in a technical engineering position involving infrastructure design technologies, data management and interchange, system design and/or development for complex applications., • Knowledge of Zero Trust architecture and its integration with CyberArk Cloud., • Required / Preferred Technologies, • CyberArk Privileged Access Management (Required), • CyberArk Privileged Cloud, • CyberArk CDE (Cloud or DevOps Extensions) – Preferred, • Azure Key Vault, • GitLab/ Ansible, • PowerShell and REST API automation, • CI/CD and DevOps tooling integration, • Active Directory / Entra ID, • Windows and Linux platforms

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Fabrication is seeking a highly experienced and technically proficient Weld Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001. The Weld Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure fabrication manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle. Key Responsibilities · Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures. · Develop weld mapping and work instructions · Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production. · Translate engineering design requirements into robust and efficient production processes. · Lead new product introduction (NPI) efforts from prototype through full-rate production. · Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts. · Integrate automated and digital manufacturing technologies where applicable. · Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability. · Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility. · Mentor technicians and junior engineers in best practices for manufacturing engineering. Required Qualifications Required Qualifications: · Bachelor’s degree in Weld Engineering. experience in weld engineering and manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors. · AWS CWI certification that is active. NDE experience a plus · Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and GD&T. · Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies. · Demonstrated success in process development, design for manufacturability, and production scaling. · Hands-on experience with containerization, modular product platforms, and structural weldments. · Knowledge of ISO9001 quality systems and compliance standards. · Exceptional analytical, problem-solving, and project management skills. · Excellent communication and interpersonal abilities. Preferred Qualifications: · Experience in containerized HVAC, power distribution, or control system enclosures. · Familiarity with sheet metal fabrication, and industrial coatings. · Certification in Lean Six Sigma, PMP, or related process improvement disciplines. · Experience with CFD/FEA simulation tools. Working Conditions: · This is a full-time onsite position based in Phoenix, AZ. · Work takes place in both offices and fabrication of floor environments. · May require occasional travel to customer sites or GTI facilities. · Must be able to occasionally lift up to 25 lbs and walk fabrication areas. GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace. Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

We’re building small, highly capable engineering pods (2–3 engineers) that own problems end-to-end and move quickly from idea to production. This role is for engineers who are comfortable operating across the full stack and using modern AI-enabled workflows to accelerate delivery. You’ll be ex

Experience in GTM Engineering, Revenue Operations, Sales Engineering, Solutions Engineering, Customer Success tooling, or software engineering applied to GTM workflows. In this GTM Engineer role, you’ll join the Systems Engineering team to build the internal systems, applications, workflows, and A

Improve engineering standards, tooling, and processes to enhance team productivity and system reliability. Experience mentoring engineers and leading technical projects. This is a high-impact, hands-on role for an engineer who thrives on solving complex problems and bridging the gap between business

Accelerate engineering productivity by empowering your fellow engineers with excellent tooling and systems. Have experience in startup environments, either as a founder or an early-stage engineer (bonus points, not required). We’re looking for experienced, problem-solving engineers across the stac

As a Mechanical Engineer, you will be responsible for product designs of existing and future AssetWatch products. This role is full time and reports to the Mechanical Engineering Manager. Knowledge of manufacturing engineering from drawings and revision control to DFM/DFA, test and tooling design.

We are looking for an experienced engineer with deep expertise in large-scale distributed systems, ML platforms, and emerging agentic architectures to help define and build the foundational tooling for the next generation of our machine learning devX tooling. Partner with ML engineers and researcher