Offres trade school à Arlington, TexasCréer des alertes d'emploi

Job Description Master Plumber PRIMARY PURPOSE: Organize and plan preventative maintenance, routine maintenance, and emergency repair plumbing section work orders to maintain the successful operation of all AISD plumbing systems; as required to meet department responsibilities. QUALIFICATIONS: • High School diploma with minimum of a current plumbing journeyman license, • Master license preferred, • Must have valid Texas driver's license, • A satisfactory driving record, • Four years of experience in the plumbing trade area with working knowledge of commercial plumbing equipment KNOWLEDGE: • Working knowledge of trade with background in maintenance of plumbing and irrigation equipment and systems, • Required experience maintaining commercial and residential water heaters, all types of domestic water circulator and booster pumps, natural gas lines, wastewater lines, and plumbing related equipment operation, i.e., threading machines, sewer cleanout machines, vacuum and jetting machines, and all types of welding equipment (gas and electric) MAJOR RESPONSIBILITIES AND DUTIES: • Organizes, plans, schedules, assigns, and supervises the daily workload of journeymen plumbers, plumbing technicians, and plumbing helpers engaged in the proper and successful installation, preventative maintenance, routine maintenance, and emergency repair of District plumbing systems, • Conducts regular inspections of in-progress and completed plumbing projects, • Provides regular on-site supervision of hazardous or unusual work assignments, • Assures availability of equipment, materials, tools, supplies, and safety equipment for plumbing section employees to properly complete assigned tasks, • Initiates requisitions for equipment, materials, tools, and supplies for plumbing section employees to properly complete assigned tasks, • Estimates time and material costs required to successfully complete special projects, • Trains personnel in the safe operation of equipment and tools, • Maintains facility plumbing fixtures, valves, irrigation systems/subsystems, wastewater lines, natural gas lines, commercial and residential water heaters, pump lift stations, floor drains and related piping, and annual natural gas testing, as directed by department supervisor, • Responsible for successful organization, leadership, and function of plumbing section operations, • Provide skilled assistance and leadership to all plumbing section employees, • Assists in the coverage of plumbing section employee absences and the training of new employees, • Assure all plumbing section tasks are completed to meet or exceed local and state code requirements, • All other duties as assigned by the Supervisor or anyone in his line of authority EQUIPMENT USED: • All of the following, associated with the plumbing trade, but not limited to: power tools i.e., PHYSICAL DEMANDS: Continuous lifting, climbing, reaching, and stooping ENVIRONMENT: Will work in, under, around, outside of all AISD facilities. Employee will exposed to all atmospheres found in this region of Texas. Working in trenches may be required. JOB DUTIES: Maintain all AISD plumbing systems and subsystems and district welding needs as noted above. NORMAL WORKING HOURS: 7:30-4:00-8 HOURS. Work hours may be adjusted to serve district.

Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s staff, employees, and business relationships At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at ___. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Hands-on Product Application • Learn each of the Sherwin-Williams automotive paint systems by studying the Product Data Sheets (PDS) and apply that knowledge in application sessions., • Properly prepare surfaces using industry approved products., • Mix paint according to the proper ratios listed on PDS’s., • Identify common paint and coating defects and correctly communicate their solutions., • Gain in-depth knowledge of coating application equipment and proper maintenance techniques., • Respond to basic questions and concerns from the customer regarding product line(s) and general operations; generally involves task orientated situations and limited problem solving under direct supervision. Online Learning • Complete required Customer Service and Product Knowledge modules as assigned., • Implement and share best practices regarding new products and customer training with team members, partnering closely with the Training Center teams. Provide Training Support • Attend I-CAR approved certification classes at the assigned Training Center, or alternative SW Automotive Training Centers., • Assist Training Center personnel during customer and employee training classes., • Work in the field with Training Center Manager, Specialist, and/or Regional Tech Reps at customer locations, assisting with new installs and customer complaints. Continuous On-The-Job Learning • Upon completion of the program, learning continues for 12 additional months in an assigned territory., • Develop and document strategies to troubleshoot customer issues., • Job shadow with Sr. Technical Reps & Technical Reps within the assigned and adjacent regions., • Attend quarterly product training classes at the Regional Training Center in assigned region to learn advanced color matching and application techniques., • Must be at least eighteen (18) years of age., • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future., • Must have a High School diploma or GED., • Must have completed an Automotive Refinish Vocational program; have at least (2) years working in a collision repair shop; or have at least two (2) years’ experience working in a Sherwin-Williams Automotive Branch., • Have a trade school degree in collision repair paint application, fleet and/or automotive refurbishment., • Have at least one (1) year of experience in a technical service role in the paint and/or automotive coatings industry Professional company provided or home office environment; however will be subject to travel and its associated factors and may be subject to moderate levels of dust, odors, fumes, chemicals, oils, extreme temperatures, loud noises, and other environmental factors found in manufacturing environments. TRAVEL REQUIREMENTS: (TIME SPENT AWAY FROM HOME OR OTHER TYPICAL OFFICE LOCATION) 50%

This job is with Ferguson, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. Job Posting: Since 1953, Ferguson has been a source of quality supplies for a variety of industries. Together We Build Better infrastructure, better homes and better businesses. We exist to make our customers' complex projects simple, successful, and sustainable. We proactively solve problems, adapt and grow to continuously serve our customers, communities and each other. Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Digital Commerce. Ferguson has approximately 36,000 associates across 1,700 locations. Ferguson is a community of proud associates who operate with the shared purpose of building something meaningful. You will build a career that you are proud of, at a company you can believe in. Join our Grand Prairie MDC Team as a DC Pipe Yard Associate Shift: Mon-Fri 02:00PM- 10:30PM Responsibilities As a DC Pipe Yard Associate, you will play a crucial role in our pipe yard operations. Your responsibilities will include: Safely and efficiently loading and unloading materials. Operating forklifts and other equipment to handle pipe and related products. Ensuring accurate inventory management and order fulfillment. Maintaining a clean and organized work environment. Adhering strictly to safety and quality standards. Collaborating with team members to achieve daily targets and goals. Identifying and reporting any operational issues to supervisors. Requirements To be successful in this role, you should have: Proven experience in a similar pipe handling position. Ability to operate forklifts and other material handling equipment. Strong attention to detail and dedication to accuracy. Physical ability to lift and move heavy materials. Excellent communication and teamwork skills. A safety-first attitude and dedication to all safety protocols. High school diploma or equivalent experience. Ability to work flexible schedule reliably. - Pay Range: - $15.00 - $36.49 - Estimated Ranges displayed are Monthly for Salaried roles OR Hourly for all other roles. - This role is Bonus or Incentive Plan eligible. - Ferguson complies with all wage regulations. The starting wage may be higher in certain locations based on local or state wage requirements. - The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability. Ferguson Enterprises, LLC. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity. Equal Employment Opportunity and Reasonable Accommodation Information ]]>

Job Description Gojob is hiring Electrical Assemblers for a multinational company located in Red Oak, TX. English is required for this position. You will be responsible for conducting electrical installations as part of the assembly process, performing integration solutions work within the facility, and assisting in the start-up and commissioning of modular data centers. This is a production environment. As a Gojobber, you will enjoy weekly pay, excellent communication from recruiters, the opportunity to build a career, health insurance and more! Shift & Pay: • Thursday - Saturday, 6:00 am to 6:00 pm, • Pay: $21.50 per hour (work 36 / paid 40), • Installs, repairs, and maintains the electrical parts of industrial equipment., • Able to climb 10ft ladder, • Works individually or as part of a team to successfully complete projects., • Follows safety procedures and adheres to electrical codes., • Correctly interprets technical documents for proper execution of assignments., • Conducts quality assurance measures and inspections., • Ensure that all administrative processes, including torque sheets, 5S (Five S), and tool inventory/tracking., • High school diploma or equivalent (GED), • Associate degree/trade school certification in a related field, • Certificate of completion in an apprenticeship program, or journeyman experience, • Knowledgeable in pertinent electrical codes and regulations, • Industrial electrical experience strongly preferred; commercial electrical experience accepted – residential electrical experience does not apply to setting, • Ability to bend conduit and installation of large cables, • Lift up to 50lbs and ability to work on ladders., • Must be able to stand, walk, kneel, bend, and sit for extended periods of time. To read our Candidate Privacy Information Statement, click here: Company DescriptionGojob is the #1 Workforce-As-A-Service platform that leverages Tech and Data to make the labor market more fluid & accessible, and empower workers with dignity.Gojob is the #1 Workforce-As-A-Service platform that leverages Tech and Data to make the labor market more fluid & accessible, and empower workers with dignity.

Job Description The Sales Manager has the opportunity to lead a sales team to create an exceptional experience for customers. This role is responsible for selecting, training, coaching, developing and retaining the very best Sales Associates for the store and driving a high-level of performance among the sales team to increase market share, achieve targeted unit sales and profit margins while delighting every Customer along the way. Lead the Future of Automotive Retail. What We’re Looking For: • Proven leadership experience, • Strategic thinking and execution skills, • Passion for innovation and people development Explore leadership opportunities at Vandergriff Hyundai today. Qualifications • Proven leadership experience, • Strategic thinking and execution skills, • Passion for innovation and people development, • High School diploma or equivalent, • Proven success in auto retail sales, • Proven leadership ability to mentor and train others, • Ability to set and achieve targeted goals, • Ability to drive an exceptional Customer experience, • Demonstrated communication and interpersonal skills, • Organization and follow-up skills, • Experience and desire to work with technology The Sales Manager has the opportunity to lead a sales team to create an exceptional experience for customers. This role is responsible for selecting, training, coaching, developing and retaining the very best Sales Associates for the store and driving a high-level of performance among the sales team to increase market share, achieve targeted unit sales and profit margins while delighting every Customer along the way Leading yourself and the team in a way that supports Vandergriff Hyundai's Vision and Mission Setting a clear vision and goals for the sales team to achieve targeted performance in new and used vehicle sales and profit Engaging and motivating the team to achieve key goals, performance expectations and Vandergriff Hyundai's best practice processes. Driving the business through a high-level of involvement in the day-to-day operations. Managing the negotiation process with Sales Associates ensuring that customers understand their vehicle purchase options and pricing. Appraising vehicles for trade. Managing all three areas of customer traffic: Showroom, E-Commerce, and Phones. Partnering with General Manager and/or General Sales Manager to plan and manage new and used vehicle inventory. Assisting in managing controllable expense elements for the New and Used Vehicle Departments. Analyzing the business to determine shortfalls and developing action plans to improve performance. Targeted unit sales and gross profit. Targeted Associate retention. Targeted Customer Satisfaction Index What are the day-to-day responsibilities? • Leading yourself and the team in a way that supports Vandergriff Hyundai's Vision and Mission, • Setting a clear vision and goals for the sales team to achieve targeted performance in new and used vehicle sales and profit, • Engaging and motivating the team to achieve key goals, performance expectations and Vandergriff Hyundai's best practice processes, • Driving the business through a high-level of involvement in the day-to-day operations, • Managing the negotiation process with Sales Associates ensuring that customers understand their vehicle purchase options and pricing, • Appraising vehicles for trade, • Managing all three areas of customer traffic: Showroom, E-Commerce, and Phones, • Partnering with General Manager and/or General Sales Manager to plan and manage new and used vehicle inventory, • Assisting in managing controllable expense elements for the New and Used Vehicle Departments, • Analyzing the business to determine shortfalls and developing action plans to improve performance What are the requirements for this job? • High School diploma or equivalent, • Proven success in auto retail sales, • Proven leadership ability to mentor and train others, • Ability to set and achieve targeted goals, • Ability to drive an exceptional Customer experience, • Demonstrated communication and interpersonal skills, • Organization and follow-up skills, • Experience and desire to work with technology, • Valid in-state driver’s license and have and maintain an acceptable, safe driving record Exciting Benefits and Perks Await You: • Competitive compensation and 401k matching, • Enjoy a healthy work-life balance with insurance plans (health, dental, vision) and maternity benefits., • Associate purchase and discount programs for new and preowned vehicles, services, parts, collision, accessories, • Access amazing deals and discounts

Job DescriptionWelder Technician (Temp-to-Hire) Pay: $17/hr Schedule: Monday–Friday, 6:00 AM–2:30 PM Location: Arlington, TX Job Type: Temp-to-Hire Position Overview We’re hiring a Welder Technician to support a busy manufacturing environment in Arlington. This role focuses on welding, fabrication, and assembly of metal components while maintaining strong quality and safety standards. This is a temp-to-hire opportunity with consistent hours and room to grow.Key Responsibilities • Read and interpret blueprints, work orders, and basic weld symbols, • Set up and operate welding equipment (MIG/TIG/Stick depending on the area), • Weld and assemble metal components to specifications, • Measure, fit, and tack parts prior to final welds, • Inspect finished welds for quality, strength, and accuracy, • Grind/clean welds as needed and maintain a clean work area, • Follow all safety procedures and PPE requirements, • Assist with general shop tasks as needed (material handling, staging parts)Requirements, • Previous welding experience in a production or shop environment (school/trade training considered), • Ability to read a tape measure and follow written instructions/prints, • Strong attention to detail and quality, • Ability to lift up to 50 lbs and stand for the duration of shift, • Reliable attendance and punctualityPreferred (Nice to Have), • Welding certification(s), • Experience with fabrication tools (grinders, saws, drills), • Forklift experienceWhy This Role, • Steady daytime schedule (6:00 AM–2:30 PM), • Temp-to-hire opportunity, • Hands-on work in a manufacturing environment #vipstaffing#zrsdal

Job Description Build More Than Just Buildings—Build Your Career. At FCL, we don’t just build buildings, we build communities, careers, relationships, and trust. As an MEP Superintendent, you’ll play a critical role in delivering complex, mission-critical data center projects. You’ll lead field execution, coordinate highly technical MEP systems, and ensure every phase of construction is completed safely, efficiently, and to the highest quality standards. If you thrive in fast-paced, high-spec environments and love turning complex plans into reality, this is your opportunity to make an impact. Why Join FCL Builders? • Build Industry-Leading Projects: Lead the delivery of cutting-edge, mission-critical data center facilities., • Become an Employee Owner: Partner with experienced professionals who are invested in your success., • Lead From the Field: Take ownership of site execution and drive real results every day., • Supportive Culture: We believe in teamwork, accountability, and having each other’s back., • Great People, Great Workplace: FCL is proud to be a Great Place to Work–Certified company where culture comes first. What You’ll Do: Pre-Construction & Planning • Review contract requirements, drawings, specifications, and MEP scopes to understand project expectations., • Collaborate with the Project Manager, Project Engineer, and other Superintendents on site setup, sequencing, and logistics., • Conduct site walks to document existing conditions and assess preconstruction risks., • Coordinate long-lead item planning, trade mobilization strategies, and permitting requirements with AHJs., • Review drawings and scopes in BIM to ensure clash-free, constructible designs. Project Execution & Field Leadership • Lead daily site operations and coordinate all mechanical, electrical, plumbing, fire protection, low-voltage, and building automation systems., • Track work progress, document T&M costs, and support forecasting and cost control efforts., • Lead daily and weekly subcontractor coordination meetings., • Proactively identify issues or delays and recommend mitigation plans., • Conduct regular field inspections to verify installation accuracy, quality, and design compliance., • Maintain detailed daily logs, as-built documentation, and support RFIs., • Plan and manage MEP schedules, commissioning, sequencing, and BIM-based installation. Team, Client & Safety Leadership • Serve as the on-site face of FCL, fostering strong relationships with owners, consultants, inspectors, and trade partners., • Communicate daily with field teams to align scope, schedule, and responsibilities., • Champion jobsite safety, lead toolbox talks and JHAs and enforce all site-specific safety protocols., • Maintain compliance with building codes, facility rules, and client safety requirements. What We’re Looking For: • High School Diploma or GED., • Minimum of 10 years of project supervision experience in an industrial or large-scale commercial construction environment, including completion of at least one mission-critical project., • Strong working knowledge of construction sequencing, subcontractor management, and quality control., • Deep understanding of MEP systems, critical infrastructure (UPS, generators, CRAHs, BMS), and commissioning processes., • Experience with daily reporting, field coordination, and issue resolution on active job sites. Nice to Have: • OSHA 30 Certification., • Proficiency with Procore, Bluebeam, Microsoft Project, BIM, and Microsoft Office Suite., • Familiarity with IST protocols and commissioning coordination. What We Offer: • Competitive salary, bonus structure, • Employee Stock Ownership Plan (ESOP), • Career development and mentorship programs, • Comprehensive and competitive benefits (health, dental, vision and so much more!), • Paid time off and holidays, • An inclusive, collaborative culture where your voice matters Ready to build your future with FCL? Apply today and let’s grow together. FCL Builders is an equal opportunity employer that is committed to inclusion and diversity. All qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected status. FCL Builders does not sponsor applicants for work visas. FCL Builders participates in E-Verify, click here to view the Right to Work Poster.

Job Description Polk Mechanical is looking for the best and brightest in the market to join our high performing team. As a result of our unparalleled customer service and unique offerings our business is experiencing impressive growth and with growth comes great opportunity for those with the ambition to accomplish great things. A career at Polk is not just a job but an opportunity to join a family of people who care about each other and care about their customers. It's no wonder our business and our team are growing. The Fire Sprinkler Service Apprentice to assist experienced Fire Sprinkler Service Technicians with the inspection, testing, maintenance, and repair of fire sprinkler systems. This entry-level role is designed for individuals interested in building a career in the fire protection industry through hands-on training, classroom training and mentorship. WHY YOU’LL DO • The Fire Sprinkler Service Apprentice to assist experienced Fire Sprinkler Service Technicians with the inspection, testing, maintenance, and repair of fire sprinkler systems., • Assist with inspection, testing, and servicing of fire sprinkler systems, • Help replace sprinkler heads, valves, gauges, and fittings, • Support troubleshooting of system deficiencies under supervision, • Learn to read inspection reports, basic drawings, and service documentation, • Perform basic pipe cutting, threading, grooving, and hanging, • Maintain tools, equipment, and job site cleanliness, • Accurately complete service paperwork and inspection reports as trained, • Follow all OSHA, NFPA, and company safety procedures, • Provide professional customer service while on site WHY YOU’LL BRING • High school diploma or GED preferred, • Mechanical aptitude and willingness to learn a skilled trade, • Ability to follow instructions and work as part of a team, • Reliable transportation and valid driver's license (preferred), • Ability to lift and carry up to 75 lbs, • Comfortable working on ladders, lifts, and at heights, • On-the-job training with experienced service technicians, • Exposure to NFP A 13 and NFP A 25 standards, • Opportunity to pursue NICET certification and state licensing, • Full-time, non-union position, • On-call or after-hours service is required, • Commercial and industrial job site WHY YOU’LL LOVE WORKING HERE At Polk Mechanical, you’re more than an employee — you’re part of Polk Nation. We invest in your success, celebrate your strengths, and provide opportunities to develop your career in meaningful ways. You’ll work alongside passionate professionals who believe in teamwork, integrity, and building something extraordinary together. BENEFITS • Paid Vacation & Holidays, • Career Advancement & Training Opportunities, • 100% Employer-Paid Medical, Dental & Vision Insurance for employees, • 401(k) Retirement Plan with employer matching, • 100% Employer-Paid Life & Disability Insurance

Job Description Gojob is hiring Electrical Technicians for a multinational company located in Red Oak, TX. English is required for this position. You will be responsible for conducting electrical installations as part of the assembly process, performing integration solutions work within the facility, and assisting in the start-up and commissioning of modular data centers. This is a production environment. As a Gojobber, you will enjoy weekly pay, excellent communication from recruiters, the opportunity to build a career, health insurance and more! Shift & Pay: • Thursday - Saturday, 6:00 am to 6:00 pm, • Pay: $21.50 per hour (work 36 / paid 40), • Installs, repairs, and maintains the electrical parts of industrial equipment., • Able to climb 10ft ladder, • Works individually or as part of a team to successfully complete projects., • Follows safety procedures and adheres to electrical codes., • Correctly interprets technical documents for proper execution of assignments., • Conducts quality assurance measures and inspections., • Ensure that all administrative processes, including torque sheets, 5S (Five S), and tool inventory/tracking., • High school diploma or equivalent (GED), • Associate degree/trade school certification in a related field, • Certificate of completion in an apprenticeship program, or journeyman experience, • Knowledgeable in pertinent electrical codes and regulations, • Industrial electrical experience strongly preferred; commercial electrical experience accepted – residential electrical experience does not apply to setting, • Ability to bend conduit and installation of large cables, • Lift up to 50lbs and ability to work on ladders., • Must be able to stand, walk, kneel, bend, and sit for extended periods of time. To read our Candidate Privacy Information Statement, click here: Company DescriptionGojob is the #1 Workforce-As-A-Service platform that leverages Tech and Data to make the labor market more fluid & accessible, and empower workers with dignity.Gojob is the #1 Workforce-As-A-Service platform that leverages Tech and Data to make the labor market more fluid & accessible, and empower workers with dignity.

Job DescriptionLive! By Loews-Arlington, TX treats guests to an unprecedented upscale experience that blends sports and entertainment with first-class hospitality and superior amenities. Ideally positioned between the new Texas Rangers' ballpark and Dallas Cowboys' Stadium, the 302-room hotel boasts an infinity-edge pool, a rooftop terrace and floor-to-ceiling windows that offer sweeping views of the Arlington Entertainment District. General • Performs work requiring the basic skills in most of the following trades: electrical, plumbing, HV AC, carpentry, paint/wall cover, locksmith, in addition to performing other general maintenance duties, • Responsible for all maintenance for the primary trade, area of expertise, • Provides supervision and training to subordinate engineering positions, • Responds to trouble/complaint/maintenance request calls throughout the hotel and grounds when directed to do so by supervisor, • May work with hazardous materials and chemicals in the performance of duties, • Uses tools, equipment, materials and chemicals safely and efficiently according to manufacturers instructions/MSDS requirements, • Checks clipboard and Maintenance Requests lists, daily for work assignments, at the beginning of and throughout each shift, • Communicates status of job assignments and maintenance requests to supervisor, • Notifies supervisor/dispatcher as required upon completion of work assignment, • Completes appropriate records associated with work perform, • Makes minor repairs to equipment brought into the shop, • May assist in performing the duties of dispatcher as needed, • May assist/perform minor set-up duties for functions throughout the hotel and grounds, • Is completely familiar with Hotel Emergency procedures and able to respond quickly and accurately, • Supportive Functions and Responsibilities, • Promotes and applies teamwork skill at all times, • Notifies appropriate individuals promptly and fully of all problems and/or unusual matters of significance, • Is polite, friendly, and helpful to all guests, management and fellow employees Attends all appropriate hotel meetings and training sessions, • Maintains cleanliness and excellent condition of equipment and work area, • Executes emergency procedures in accordance with hotel standards, • Complies with required safety regulations and procedures, • Complies with hotel and department standards, policies and rules, • Recycles whenever possible, • Remains current with hotel information and changes The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation: • Post high school training in engineering/maintenance related discipline, • Ability to read, write and speak English fluently, • Strong mechanical background with minimum 2 years hands on experience in maintenance related activity. Previous hospitality experience required., • Ability to bend, stoop, and lift ( up to 75 lbs.) repetitively, • Ability to work flexible hours to include weekends and holidays

Job DescriptionDescription: Job Description The individual will be doing hands-on repair, assembly, soldering, or re-manufacture of mechanical and electromechanical components utilizing company provided approved data. The technician will be responsible for testing, troubleshooting, and repairing electrical, electromechanical, and machined assemblies sent in for repair evaluation by our customers. Training, technical documents, and oversight are provided by PG Aerotech management. Essential Responsibilities • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2 or more years of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • The ability to lift up to 20 lbs., • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • Hourly position commensurate with experience and skill level and/or certifications. ($24 - $32) Airline Component Parts (ACP) is an equal opportunity employer. Visit our website at Airline Component Parts | Jet Parts Engineering Requirements:

Job Description PRIMARY PURPOSE: Education and Experience: • High School Diploma or GED equivalent from an accredited, • Must have valid State of Texas Journeyman Electrician License, • Ability to read and interpret electrical plans, specifications and technical Five years' commercial experience required., • Five years' electrical maintenance experience required, • Must have valid Texas Driver's License and have a satisfactory driving record, • Good interpersonal and verbal communication skills MAJOR RESPONSIBILITIES AND DUTIES: • Must be physically able to operate a motor vehicle with or without reasonable accommodation, • Must be able to work at heights up to 50 feet with or without reasonable accommodation, • Must be able to work under limited supervision, • Responsible for installation, repair and maintenance of electrical systems for AISD facilities, • Maintains assigned vehicle, equipment, and tools to ensure safe operating condition, • Coordinates with Electrical Foremen and other trades for the purpose of completing projects and work orders, • Inspects electrical systems and their components for the purpose of evaluating condition, • Identify necessary repairs and recommend preventive maintenance, • Informs personnel regarding procedures and/or status of work orders for the purpose of providing information for making decisions, • All of the following associated with the electrical trade, but not limited to: power tools i.e.; drill saws, hammer drills, pneumatic and electric man lifts, scaffold ladders, basic hand tools, electronic test equipment, trenchers. Environment: • Will work in, under, around, outside of all AISD facilities, • Work will be done within AISD zone concepts., • Employee will be exposed to all atmosphere found in this region of Texas. Maintain all AISD zone concepts. Employee working in trenches may be required. Physical Demands: Continuous lifting, climbing, reaching, O=Occasionally F=Frequently C=Continuously Lift or carry 01-10 lbs C 11-20 lbs C 41-60 lbs C 61-More lbs C Pushing Bending/Stooping C Reaching above shoulder C Driving equipment C Climbing Ladders C Stairs C Ramps C Scaffold C Sitting O Normal working hours: Work hours and work days and working hours may be adjusted to serve district needs*

Job Description Master Electrician PRIMARY PURPOSE: Responsible for evaluating, organizing, and leading all preventative maintenance, routine maintenance, and emergency repair needs of District electrical systems. QUALIFICATIONS: Education and Experience: • High School graduate or GED equivalent from an accredited institution (required), • -Valid State of Texas Master Electrician license (required), • Must have valid Texas driver's license, • Maintain a satisfactory driving record that meets the standards of the District's insurance policy, • Five years of electrical industry specific supervisory experience, • Good interpersonal and verbal communication skills MAJOR RESPONSIBILITIES AND DUTIES: • Plans, assigns, schedules, and supervises the work of journeymen electricians and electrician helpers engaged in installation, preventative maintenance, routine maintenance, and emergency repair of District electrical systems, • Conducts periodic inspections and gives on-site supervision over hazardous or unusual work assignments, • Assures availability of equipment, materials, and supplies, • Initiates requisitions for tools, parts, and equipment, • Estimates time and material cost required for special projects, • Trains personnel in the safe operation of equipment and tools, • Must be physically able to operate a motor vehicle, • Must be able to work at heights up to 50 feet, • Routine observation of electrician's work assignments, • Assists in the coverage of absences and the training of new employees., • Other duties as assigned by the Supervisor of anyone in his line of authority Equipment Used: All the following hand tools and power tools associated with the electrical trade, but not limited to drills saws, hammer drills, pneumatic and electric man lifts, scaffolds ladders, basic hand tools, electronic test equipment, and trenchers, etc. Environment: Will work in, under, around, and outside all AISD facilities. Employee will be exposed to all environmental conditions found in this region of Texas. Working in trenches may be required. Physical Demands: Continuous lifting, climbing, reaching, stooping.

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Level C Industrial Maintenance Technician Job Type: Full-time Pay: $28.00 - $32.00 per hour Job Purpose The Level C Maintenance Technician is responsible for the maintenance, troubleshooting, and repair of packaging and warehouse equipment at Quality Packaging. This includes horizontal form-fill-seal machines, shrink wrap tunnels, forklifts, stretch wrappers, and registered bundle wrappers, as well as handling general building and electrical maintenance. The role requires hands-on technical expertise, timely response to maintenance issues, and effective communication across various channels (phone, email, and in person). Key Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (e.g., forklifts, pallet jacks, sweepers)., • Diagnose and repair equipment malfunctions involving mechanical, electrical, pneumatic, and hydraulic systems., • Maintain and repair batteries and chargers., • Conduct minor welding, brazing, soldering, and fabrication tasks as required., • Address mechanical damage to warehouse infrastructure, including racking, flooring, and piping., • Interpret equipment manuals, blueprints, and work orders to perform scheduled maintenance and service tasks., • Maintain accurate records of inspections, repairs, and preventive maintenance tasks., • Operate mechanical hand tools and measurement instruments (tape measures, micrometers, etc.)., • Support production efficiency by ensuring minimal downtime through prompt maintenance actions. Technical Requirements • Strong mechanical aptitude and electrical troubleshooting skills., • Ability to work with high-voltage systems, including 480V 3-phase motors., • Multi-disciplinary repair experience (mechanical, electrical, pneumatic, hydraulic)., • Familiarity with Variable Frequency Drives (VFDs), Servo motors and drives, encoders, and equipment timing., • Basic understanding of PLC systems, sensors (photo eyes, proximity sensors), and logic software., • Customer Service Orientation: Ability to communicate effectively with team members at all levels., • Flexibility: Ability to shift priorities and remain calm under pressure in a fast-paced environment., • Self-Motivation: Capable of working independently and taking initiative in troubleshooting and maintenance tasks., • High School Diploma or GED required; technical certifications or trade school training preferred., • Minimum of 5 years’ relevant hands-on maintenance experience in a production or packaging environment. Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Join our dynamic team as a Technical & Event Specialist! We're on the lookout for skilled individuals to support our Creative Producer in delivering unforgettable events at Epic Central. Technical or Trade School (Did not complete). Technical or Trade School (Completed).

Job Description ROLE AND PURPOSE: To serve as HVAC Technician QUALIFICATIONS: Minimum Qualifications: • Valid Texas drivers license and satisfactory driving record, • High school diploma required, • Four years of experience with commercial building HVAC systems or technical certification from approved trade school or college., • Knowledge of facility mechanical and electrical systems, • Strong organizational, communication, and interpersonal skills INSTRUCTIONAL MANAGEMENT • Models behavior that promotes a positive organizational climate, • Provides assistance in implementation of maintenance department goals and initiatives, • Assists in advancing the mission, vision, goals, and strategic plan for the district, • Performs programming and on-site repairs to improve the learning environment, • Actively supports the efforts of others to achieve the district's goals and implement the strategic plan, • Maintains an effective system of communication among department staff and individual school staff, • Provides support to HVAC Foreman and Supervisor to address departmental functions, • Provide support to campuses to address facility maintenance, • Troubleshoots mechanical and automation problems, • Assists in repairs to make HVAC more effective, • Maintains a working knowledge of district policies, procedures, and practices, • Helps facilitate communication and coordination with campuses, • Seeks, accepts, and responds to evaluative feedback from subordinates, peers, and supervisors, • Assumes personal responsibility for enhancing competencies through staff development, • Exhibits good judgment and logical thinking, • Continually improves and updates knowledge of the District's facilities and maintenance initiatives PHYSICAL DEMANDS: • Frequent walking, standing, crouching, stooping, lifting, pushing, pulling, bending, reaching overhead and horizontally, • Occasionally move objects up to 75 pounds; ascend/descend ladders, scaffolding ramps, poles, • Use of tools/equipment requiring a high degree of dexterity, • Regularly operate a light truck or van EQUIPMENT USED: • Power tools, • Hand and pneumatic tools, • Drills, • Saws, • Shears, • Snips, • Refrigerant pressure gauges, • Multi-meters, • Testers, • Leak detectors, • Man lifts, • Scaffolds and ladders, • Two-way communication devices.

Job Description ROLE AND PURPOSE: To paint the interior and exterior of District facilities, parking lots, driveways, etc. QUALIFICATIONS: Education/Certification: High School Diploma or approved equivalent preferred Four years commercial building painting experience. Valid Texas driver's license and a satisfactory driving record Special Knowledge/Skills: Experience in painting trade with background in painting of commercial facilities Experience also required in general building maintenance 4 years of experience using painting materials and how to select, and apply them 4 years of experience in commercial and/or construction painting techniques 4 years acquired aptitude in using appropriate painting tools (brushes, caulking gun, etc.) Working knowledge of health and safety precautions regarding painting MAJOR RESPONSIBILITIES AND DUTIES: · Follow all AISD safety procedures as covered in AISD safety handbook · Abide by all AISD policies and procedures as outlined in AISD auxiliary employee handbook · Assume responsibility for safe operation and care of assigned service vehicle, tools and equipment · Assume responsibility for personal timecard · Assume responsibility for maintenance and repair of all AISD physical facilities and structures, programmed maintenance procedures, and assigned zone · Prepare sites for painting, including building scaffolds, operating personnel lifts, etc. · Coordinate, organize and complete daily assignments assuming responsibility for proper documentation regarding assigned task, work orders and procurement of supplies · Initiate work orders within assigned zones as needs are recognized by zone employee · Coordinate, organize, complete daily tasks assuming responsibility for proper documentation for assigned work orders · Assume responsibility for daily directives as given by appropriate administrators · Assume all other duties as assigned to serve the needs as determined to be in the best interest of the AISD · Maintain effective and positive public relations rapport within assigned department and with all other areas of contact EQUIPMENT USED: · All of the following, associated with the building trade, but not limited to: power tools i.e.: drills, saws, hammer drills, pneumatic and electric man lifts, scaffolds, ladders, basic hand tools, gas/electric powered spray equipment WORKING CONDITIONS: Physical Demands: Frequent standing, walking, bending, stooping, lifting, reaching, pushing and pulling with frequent exposure to water and chemicals. Prolonged use of computer and repetitive hand motions. Must be able to lift twenty (20) pounds unassisted and forty (40) assisted. Mental Demands: The demands associated with time pressures and constraints with frequent interruptions while maintaining emotional control under stress. Must be mentally alert, able to learn and apply new methods in all areas. Environmental Factors: Variable extremes in temperature; loud noises; standing on hard floor surfaces while working; numerous simultaneous activities; dealing with various groups of employees. The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

Job Description ROLE AND PURPOSE: Maintain the operation of all District facilities as required to meet department responsibilities. QUALIFICATIONS: Education/Certification: • High School graduate or GED equivalent from an accredited institution preferred, • Maintain a satisfactory driving record that meets the standards of the District's insurance policy, • General knowledge of commercial maintenance and carpentry, • Commercial Painting and Flooring Experience Preferred, • Mechanical Aptitude and ability to learn MAINTENANCE SUPPORT: • Follow all AISD safety procedures as covered in AISD safety handbook, • Abide by all AISD policies and procedures as outlined in AISD auxiliary employee handbook, • Assume responsibility for safe operation and care of assigned service vehicle, tools and equipment, • Assume responsibility for personal time card, • Assume responsibility for maintenance and repair of all AISD physical facilities and structures, programmed maintenance procedures, and assigned zone, • Maintain and repair District physical facilities and structures and complete programmed maintenance procedures, • Maintain all physical buildings and structures including concrete, flooring, drywall, acoustical ceilings, and commercial carpentry, as directed by department foreman, • Coordinate, organize and complete daily assignments, assuming responsibility for proper documentation regarding assigned tasks, works orders, and procurement of supplies, • Initiate work orders within assigned zones as needed, • Position may require overtime, as necessary to maintain function of District facilities, • Position will respond to service calls in a timely manner while serving on-call duty, as necessary to maintain function of District facilities, • Any other duties as may be directed by your immediate supervisor and/or any other supervisor within your line of authority, • Maintain the operation of all District facilities as required to meet department responsibilities. MENTAL DEMANDS / PHYSICAL DEMANDS / ENVIRONMENTAL FACTORS: • Environment Factors: Will work in, under, around, and outside of all AISD facilities, will be exposed to all outside conditions found in this region of Texas, exposure to dust, chemicals, and other materials and slippery and uneven walking surfaces., • Physical Demands: While performing the duties of this job, the employee is regularly required to stand, move throughout the room and or facility, communicate verbally and electronically, use hands to finger, handle or feel objects, tools, or controls, ability to work overhead, reach with hands and arms, stoop, kneel, crouch, and or crawl; climb; balance, and drive. Employee may be required to work on knees from time to time., • While performing the duties of this job, the employee is regularly required to lift or exert force of up to 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust and focus., • Must be able to safely tolerate the elements as required for the craft. Be able to work off scaffolding and a minimum of 40-foot ladder

Job Description The Maintenance Technician will be responsible for providing technical maintenance expertise related to work order processing, installing, repairing, servicing equipment, and overall maintaining wash quality standards and overall product including the vacuum area and pay station throughout the assigned District. This role will involve training of all team members on maintenance, repairs, and safety standards through training programs and scheduled site visits. The goal of this role is to support a reduction of wash down times, closing site-level work orders, and staying within given capital and operational budgets. This role will work closely with the District Manager, Site Managers, local site level team members and Maintenance Director to expeditiously address wash down, wash quality, and facilities related issues. They will also be responsible for reviewing and following up on completion of any 3rd party scheduled projects. Responsibilities Maintenance Support • Provide technical knowledge and support during wash down, • Perform installation and updating of wash equipment, components, repairing, replacing, troubleshooting equipment and buildings on property, • Ensure optimal operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems; following diagrams, sketches, operations manuals, manufacturer’s instructions, and engineering specifications, troubleshoot malfunctions while training others, • Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments, • Removes defective parts by dismantling devices; using hoists and hand and power tools; examining form and texture of parts, • Adjusts functional parts of devices and control instruments by using hand tools, • Advanced electrical work and control wiring, plumbing maintenance, installing, dismantling, repairing and reassembling machinery and equipment, • Metal fabrication/welding, • Provide resources to site team members to deliver a great wash experience to customers, • Scheduled site visits each week to designated sites within district, • Actively participate in weekly meetings with operations and support team, • Maintain a work order target as budgeted, • Maintain safety standard requirements, • Ensure landscaping is maintained neat and clean, • Attend weekly wash quality meeting with District and facilities management, • Collaborate with District Manager and Site Managers to provide expert knowledge on facilities and to coach, direct, train local based team members., • Work together with Facilities Maintenance Director to schedule production to budget, • Assist acquisitions and new development team in launching locations, • Interact with support office to ensure completion of any licensing or permitting requirements, • Work directly with District Manager and Facilities Maintenance Director to resolve issues and review overall tunnel operations, • Travel and training between all sites in the district performing tunnel repairs and new equipment installs, • Partner closely with District/Area team to complete high priority projects and implement new technology launches, • Maintain budgeted standards for facilities and equipment repairs/Cap Ex projects, • Increase car counts through efficiencies, • Facilitate training with Site Managers, • Participate in training of District Manager new hires on daily operating procedures, closing procedures, and any facility or wash related task related to operations, • Onsite training of team members concerning quality of wash and best safety practices Required Skills • 2+years’ experience in an industrial, facilities, or manufacturing environment, • Knowledge of mechanical/electrical components including shafts, bearings, gear boxes, pumps, motors, drives, • Valid driver’s license, • Associate degree, equivalent technical training, or appropriate hands-on experience, • Certification through a tech/trade school beyond high school preferred, • Ability to effectively train team members on the proper way to safely operate equipment while ensuring a high-quality member experience, • Strong time management and analytical skills, • Excellent verbal and written communication skills, • Excellent organizational skills and attention to detail, • Ability to perform well in a fast-paced environment, • Carwash management/mechanical experience preferred, • Proactive, self-starter on identifying tasks and programs to complete and/or document; strong ability to work under pressure in a fast-paced environment, • Available to be on-call during weekends, • Available to do project in evening after normal business hours, • Extensive travel required

Job Description FST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. About the job: A commissioning senior project engineer reports to a team leader and is responsible for the delivery and execution of our professional services tasks for equipment in mechanical, electrical, plumbing, and associated systems. Responsibilities: • Primary activities include completing office assignments, time and expense management, in-field installation validation, field observation reports and meeting notes, functional performance testing, on-site and factory witness testing, writing of reports and meeting notes, submittal reviews, and design documentation evaluation., • Additional activities include executing target billable hours, managing tasks within time budgeted, leading Cx meetings, assisting the construction team with identifying/solving technical issues when they arise, and interpreting contract documents to predict scope gaps, maximize opportunities to provide value for clients, and reduce risk., • Administrative activities include supporting the team leader in coordinating weekly staff scheduling, training/mentoring team members on proper documentation, field procedures, and equipment usage, participating in and leading sessions of the company-wide developmental safety and training programs, and supporting revenue targets and quality assurance goals by expanding relationships with existing clients., • completed a bachelors degree in HVACR, mechanical or electrical engineering, construction management or an associates degree in engineering technology or related trade school, construction, maintenance, or engineering controls experience, • Must hold an active Professional Engineer (PE) license in Virginia or Maryland, • 7+ years employment in a staff or intern position related to maintenance, construction, or engineering controls or 3+ years in the Cx industry, • 5+ years of experience managing the interconnectivity of building equipment including pumps, fans, motors, air ventilation, chillers, boilers, steam distribution, heat absorption, building automation systems, optimization techniques, electrical distribution, fire alarm, variable refrigerant flow, and waste-water systems., • Knowledge of construction drawings, specifications, bid process, and ancillary industry documents, • Aptitude to solve problems independently and in a team environment, • Effective verbal and written communication skills, • Public speaking and presentation skills, • Adaptability to varying indoor and outdoor working conditions, • Physical fitness, capability to lift at least 30 pounds, and ability to climb ladders, • Trade association involvement, • EIT, ACP. CEM or similar certification from experience, • OSHA 30 or other safe workplace certifications 9TyITwSpJd

Job Description Join Hurst Autoplex, a family-owned car dealership well known in DFW for custom lifted truck and luxury vehicles, as a New/Used Car Salesperson and be part of a dynamic team where you can showcase your passion for cars and sales. We sell all makes and all models. About the Company: Hurst Autoplex is a well-established dealership located in Hurst, Texas. We are committed to providing our customers with a wide selection of quality vehicles and exceptional service. Responsibilities: • Meet and exceed sales targets, • Provide excellent customer service, • Build and maintain relationships with customers, • Stay updated on product knowledgeRequirements:, • Prior sales experience preferred, • Excellent communication and interpersonal skills, • Ability to work in a fast-paced environment, • Valid driver's licenseBenefits:, • Monthly compensation of $5000, • Opportunity for growth and development, • Health insurance benefits We’re a leading family-owned car dealership in Hurst, Texas, seeking a highly motivated and experienced New/Used Car Sales Person to join our team! This individual will be responsible for selling both new and used cars, building and maintaining client relationships, and providing exceptional customer service. Compensation & Benefits: We offer competitive pay and a generous commission structure, providing our sales staff with the opportunity to earn a substantial income. In addition, we offer a comprehensive benefits package including: • Health insurance, • Dental Insurance, • Paid Vacation • Deliver exceptional customer service to clients by providing accurate and up-to-date information on all available vehicles, • Meet and exceed sales targets by actively prospecting and selling to potential customers, • Collaborate with the sales team and management to achieve departmental goals, • Build and maintain client relationships through follow-up calls, emails, and other forms of communication, • Provide clients with test drives and assist them in selecting the right vehicle for their needs and budget, • Negotiate sales prices, including trade-in values, with customers, • Complete all necessary paperwork in a timely and accurate manner, • Attend all required training and meetings to stay updated on new products and sales techniques, • Follow up with customers after the sale to ensure satisfaction and future business Requirements: • High school diploma or equivalent; college degree preferred, • A valid driver's license and a clean driving record, • Proven track record in a sales role, preferably in the automotive industry, • Excellent communication and interpersonal skills, • Ability to work independently and as part of a team, • Strong negotiation and problem-solving skills, • Proficient in using technology, including CRM software, • Flexible schedule, including evenings and weekends EEOC statement: Hurst Autoplex is an equal opportunity employer and encourages individuals of all backgrounds to apply. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. We are committed to creating an inclusive work environment for all employees.

Job DescriptionSalary: Why Pref-Tech? Voted "Top Workplaces" by Houston Chronicle, USA Today and Austin American Statesman! We aim to make family a core reason we attract incredible people, retain them, and collectively deliver unequaled quality and service to customers. If your heart and mind are pushing you to join a team who deeply desires to be the best in the world, has a long-game approach to business, prides itself on doing exceptional work, celebrates service to others, and is willing to invest in you, you should consider Pref-Tech. Position Overview: A Design Estimator at Pref-Tech is responsible for supporting Sales & Design Professionals(SDPs) in the construction of estimates for assigned projects based on Preferred Technologies estimation standards. Key Responsibilities: • Lead, manage and assume accountability for assigned sales projects and sales tasks., • Meet regularly with SDPs and Project Managers to determine and prioritize the companys design estimation needs., • Be able to present designs to SDPs, Operations, and to the end user as needed, • Go on site visits to determine customer needs, with or without SDPs., • Enter high security areas which may require immediate background checks., • Continuously develop sales & design skills & certifications. Required Qualifications: • Bachelors degree preferred, • High School Diploma or GED Equivalent, • At least 2 years of design estimation experience, with preference of those years spent in the general construction and/or specialty trade contracting industries, • Experience with REVU20, Bluebeam software, • Experience with AutoCAD, • Ability to review and interpret blueprints, • Exceptional written and verbal communication skills, • Experience and confidence with public speaking and presenting to audiences, • Ability to hold others accountable to completing their assigned tasks, even if they hold positions of greater responsibility, • Fluency with Microsoft Office 365 software tools, • Willingness to take on new challenges and build on current skills, • Exceptional analytical and conceptual thinking skills, • Capacity to work independently and collaboratively, • Ability to work efficiently without compromising quality or accuracy Preferred Qualifications: • Experience in general construction and/or specialty trade contracting industries, • Experience with AutoCAD, • Fluency with Microsoft Office 365 software tools Benefits: • Competitive Salary, • Inclusion in Operational Incentive Program, which shares excess profits as bonuses, • 401KSafe Harbor Plan with matching dollar-for-dollar up to 4% of annual gross salary (Traditional and Roth options available), • Health, dental, vision and other elective insurances Work Hours: Standard workdays and times are Monday Friday, 8:00 a.m. to 5:00 p.m. About 80% of theDesign Estimator work can be done remotely. The remaining 20% will include in-personactivities such as meetings, networking events, etc. Some travel will be required. Physical Requirement: This position is primarily office-based and requires the ability to sit for extended periods, operate a computer and standard office equipment, and communicate effectively in person and electronically. Occasional light lifting (up to 15 lbs.) may be required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Core Values: First and foremost, at Pref-Tech, you must understand, internalize, and represent our PGRIT Core Values: • Professionalism: Our expectations are high, we take great pride in our work, and we communicate well., • Grit: We thrive on challenges. We do what it takes to get the job done., • Right: We know what right is and do it every time., • Intelligent Thought: We plan meticulously, execute decisively, and resolve issues effectively., • Trusted Advisors: We are experts. We continuously develop our knowledge and transfer that knowledge to each other, our customers, and our vendors. You must also fulfill our purpose statement within all decisions and actions in performance of your job and when representing Pref-Tech: Within a family culture, nurture and inspire our employees to creatively resolve customer pain using the highest level of craftsmanship and service. EEO Statement: Preferred Technologies, LLC is an Equal Opportunity Employer who is committed to workforce diversity. Minorities/Females/Disabled/Veterans are encouraged to apply. Qualified applicants will receive consideration without regard to age, race, color, religion, sex, sexual orientation, disability, or national origin. We offer a smoke-free and drug-free workplace. ADA Accommodation Statement If you require reasonable accommodation to apply for a position or to participate in the interview process, please contact Recruiting . Candidate Screening: Employment is contingent upon successful completion of background investigation and pre-employment drug screen. All applications and resumes are held in confidence. Only candidates whose profiles closely match requirements will be contacted for an interview.

Job DescriptionOne Goal, One Passion - Growth is Everything at Window Nation Recruiting the best talent is one of Window Nation's main goals. With growth always being our number one priority, we're committed to finding and keeping the best employees possible. We want you to be your authentic self, we want you to love what you do, we want you to grow with us. Grow professionally and grow personally. We know that we all grow together at Window Nation, and we are proud of that. One Goal, One Passion - Growth is Everything at Window Nation. Urgently Hiring! About the Role: We’re seeking an Event Sales Representative responsible for interacting directly with homeowners at community events, festivals, and home shows across the area. Your goal is to generate leads and appointments for our sales team while representing the brand with professionalism and enthusiasm. This entry-level, part-time position offers paid training and a chance to build valuable skills in sales, negotiation, strategic planning and closing techniques. It’s a great opportunity to explore your creative side of communication while having fun with the 3rd largest home remodeling company in the country. We value customer-facing experience in any industry. While backgrounds in areas such as sales, hospitality, retail, food service, education, or service are common examples, we welcome experience from any role that involves strong communication, adaptability, and interpersonal skills—qualities that are essential for success in this position. While direct event marketing experience is a plus, it is not required. Typical Event Day Overview: - Location/Transportation Requirements: Event Sales Representative must travel to various event locations such as home shows, community festivals, craft shows, and other local events with high foot traffic; typically, within a designated region. Reliable transportation is essential to ensure timely and consistent attendance. - Setup & Physical Requirements: Event Sales Representative are expected to set up branded booths or displays, which may include signage, promotional materials, and product samples. This role requires the ability to lift and transport items weighing up to 50 pounds as part of the setup and teardown process. - Engagement: Throughout the event, representatives actively approach attendees or shoppers, initiate conversations, and introduce the company’s products or services. - Lead Capture: Gather customer information, answer questions, and qualify leads for follow-up by the sales team. - Brand Representation: Representatives maintain a professional, friendly demeanor and ensure the brand is positively represented. - Duration: Events typically last several hours, often requiring agents to stand and interact continuously for up to 8 hours. - Schedule: Most events occur on weekends or evenings to align with peak attendance times. We're hiring in the Dallas metro region and surrounding areas, including Grand Prairie TX, Irving TX, Arlington TX, Fort Worth TX, Red Oak TX, Palmer TX, Plano TX and Richland Hills TX.Core Role Responsibilities • Enthusiastic communication with a customer audience to generate complimentary in-home appointments for homeowners to help generate revenue for the company., • Create on-site event buzz and promote brand knowledge by following prescribed Window Nation procedures and messaging., • Use qualifying sheets and scripts to resolve customer questions and concerns., • Adjust on-site event marketing and sales tactics according to current KPI targets and results as needed., • Daily set-up, maintenance, operation, and presentation of on-site event marketing programs to ensure maximum exposure of the Window Nation brand., • Work is performed in an event environment (Home Shows; Craft Shows; Local Farmer Markets, etc.) which requires the ability to stand for long periods of time., • These events are at various places in the local area; it is expected that you can be at the event on time to set up the marketing collateral and stay through the event and breakdown the same marketing collateral., • This role is a part-time event agent role that requires you to work a schedule consisting of weekdays and weekends. Basic Qualifications, • High school diploma or GED, • Ability to lift up to 50 pounds., • Requires the ability to stand for long periods of time; up to 6 hours during event.Preferred Qualifications, • 1+ years’ experience of sales, lead generation, or similar experience, • Ability to effectively present information to customers and employees of the organization in one-on-one, small, and large group settings., • This role involves standing for extended periods (up to 8 hours) during events and requires availability to work evenings and weekends as part of regular business operations. Reliable transportation is necessary to travel to and from event locations., • Candidates should be available to work approximately 10-30 hours per week. While actual hours may vary based on business needs, applicants must be available for a minimum of two weekends per month (Friday through Sunday). What We Offer:, • Paid training, • Competitive pay starting plus, uncapped commissions (up to $50 per lead), • Growth opportunities within a rapidly expanding company, • A supportive team culture where your contributions matter, • Mileage reimbursement at 49 cents per mile. (Mileage is reimbursed for round-trip travel from your home address to the event location.) In addition to a competitive hourly wage, this role offers commission opportunities to boost your earnings and mileage reimbursement to help cover travel expenses. These added benefits are designed to provide flexibility and reward your efforts. This job is similar to: Retail Sales Associate, Brand Ambassador, Field Marketing Representative, Event Coordinator, Product Demonstrator, Retail Sales Associate, Store Promotions Coordinator, Customer Engagement Specialist, Trade Show Representative. Ready to connect with customers and grow your career? Apply today! #LI-NB1 Window Nation cultivates a culture of inclusion that respects our employees' individual strengths, views, and experiences. We believe our differences make us a better team – one that makes good decisions, drives innovation, and delivers better business results. At this time, Window Nation is unable to provide sponsorship for employment visas now or in the future. Candidates must be authorized to work in the United States on a permanent basis without the need for current or future visa sponsorship. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: Why Pref-Tech? Voted "Top Workplaces" by Houston Chronicle and Austin American Statesman, 2 years in a row! We aim to make family a core reason we attract incredible people, retain them, and collectively deliver unequaled quality and service to customers. If your heart and mind are pushing you to join a team who deeply desires to be the best in the world, has a long-game approach to business, prides itself on doing exceptional work, celebrates service to others, and is willing to invest in you, you should consider Pref-Tech. Position Overview: A Project Manager at Pref-Tech will be responsible for everything their team does or fails to do, must inspire his or her team to provide customers with unparalleled service in a profitable manner, must manage multiple, complex projects simultaneously and ensure that all customers are completely satisfied. Only hard-working, self-starting, intelligent leaders succeed as Project Managers at Pref-Tech. Key Responsibilities: • Must meet or exceed Pref-Tech installation standards., • Must complete projects on time and within budget., • Must train and develop his or her team and take ownership of team members morale and welfare., • Must maintain accountability of assigned tools and equipment and keep them in good working order., • Must commit to continuously helping Pref-Tech refine and improve the way the company operates., • Conduct a Project Handover Meeting with the Sales Team to officially assume responsibility of the project., • Obtain a comprehensive understanding of the projects contract documents:, • Scope of Work outlined in contract, proposal and/or purchase order, • Drawings, • Specifications, • Invoicing Requirements, • Certified Payroll Requirements., • Lead a Project Kick-Off Meeting with the customer., • Build the Pre-Construction Submittal Package:, • Material Data Sheets, • Shop Drawings, • Project Schedule, • Schedule of Values, • Permit Drawings, • Ensure that the Project Team and Pref-Tech meet all project compliance requirements:, • Certificates of Insurance, • Safety Requirements, • License Requirements., • Refine the Bill of Materials, plan purchasing, and issue Purchase Orders to vendors., • Organize the Project Team and refine the installation plan., • Coordinate the installation plan with the Owner, General Contractor, Other Trades, and Subcontractors., • Participate in and oversee the installation., • Conduct regular quality control inspections of the work., • Conduct regular safety meetings and inspections., • Educate, train, and retrain Project Team to ensure high standards and continuous development., • Receive change orders, participate in building proposals for the change orders, incorporate approved change orders into the project, and maintain an accurate accounting of all changes., • Identify, write, submit, and track Requests for Information., • Build invoice requests, submit invoice packages to the Accounts Receivable Manager, and ensure accurate and comprehensive invoices go to the customer., • Manage costs throughout the project., • Coordinate software programming effort and training with the Programming Team and Owner., • Conduct pre-testing and final commissioning of projects., • Manage the build-out of the Post-Construction Submittal Package:, • As-Built Drawings, • Commissioning Sheets, • Programming Matrix, • Operations and Maintenance Manuals, • Warranty Letters., • High School Diploma or GED Equivalent., • At least 5 years of project management experience, with at least 2 of those years spent managing in the general construction and/or specialty trade contracting industries., • Must be at least 18 years of age., • Must possess a valid TX drivers license, successfully pass an MVR (Motor Vehicle Record) check, and maintain a clean driving record as a condition of continued use of a company vehicle., • Think critically, reason, and solve problems., • Plan, organize, and manage resources., • Make timely and accurate decisions., • Communicate effectively in oral and written formats., • Mitigate risks and problems and resolve any conflicts that arise., • Motivate team members to accomplish tasks., • Proficiently use MS Word, MS Excel, MS Project, MS Visio, Adobe, BlueBeam., • Be a subject matter expert on installing and servicing access control, intrusion detection, and video surveillance systems., • Understand the basics of IP networking and IP-based equipment., • Know and enforce Occupational Safety and Health Administration (OSHA) standards and requirements., • Bachelors degree in Business Administration, Engineering, or a related field., • PMP or similar project management certification., • Low Voltage industry certifications from ASIS, BICSI, ESA etc. Benefits: • Competitive Salary, • Company Vehicle, • Inclusion in Operational Incentive Program, which shares excess profits as bonuses 401K Safe Harbor Plan with matching dollar-for-dollar up to 4% of annual gross salary (Traditional and Roth options available) • Health, Dental, and other elective insurances, • World-class training and professional development Work Hours & Travel: • Office hours are Monday through Friday 8am 5pm., • As a part of overseeing the teams the required work hours may extend outside of office hours to be available during hours required to support specific jobsite hours, including nights and weekends., • Project Managers should expect to spend 25-50% of their working hours mobile/on jobsites. Physical Requirements: This position is primarily office-based and requires the ability to sit for extended periods, operate a computer and standard office equipment, and communicate effectively in person and electronically. Must have the ability to: • Ability to safely lift and carry up to 50 lbs., • Comfortable working outdoors in various weather conditions, including heat and rain., • Capable of ascending and descending ladders (614 feet) and stairs of varying heights with minimal restrictions., • Willingness to work from a bucket truck as required for installations and maintenance. Core Values: First and foremost, at Pref-Tech, you must understand, internalize, and represent our PGRIT Core Values: • Professionalism: Our expectations are high, we take great pride in our work, and we communicate well., • Grit: We thrive on challenges. We do what it takes to get the job done., • Right: We know what right is and do it every time., • Intelligent Thought: We plan meticulously, execute decisively, and resolve issues effectively., • Trusted Advisors: We are experts. We continuously develop our knowledge and transfer that knowledge to each other, our customers, and our vendors. You must also fulfill our purpose statement within all decisions and actions in the performance of your job and when representing Pref-Tech: Within a family culture, nurture and inspire our employees to creatively resolve customer pain using the highest level of craftsmanship and service. EEO Statement: Preferred Technologies, LLC is an Equal Opportunity Employer who is committed to workforce diversity. Minorities/Females/Disabled/Veterans are encouraged to apply. Qualified applicants will receive consideration without regard to age, race, color, religion, sex, sexual orientation, disability, or national origin. We offer a smoke-free and drug-free workplace. Candidate Screening: Employment is contingent upon successful completion of background investigation and pre-employment drug screen, as well as successfully pass an MVR (Motor Vehicle Record) check. Pref-Tech maintains a drug-free workplace and conducts random drug screenings as part of our commitment to safety and compliance. All applications and resumes are held in confidence. Only candidates whose profiles closely match requirements will be contacted for an interview. ADA Accommodation Statement If you require reasonable accommodation to apply for a position or to participate in the interview process, please contact Recruiting at .

Job DescriptionBenefits: • Bonus based on performance, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off Benefits include: Competitive Pay, Multiple Locations, Paid Vacation, Holiday Pay, 5 day work week, closed Sundays, Safety boot reimbursement, Company matching retirement, Medical/Dental plans, Apprentice tool program, paid training (online, ASE, Vendor), supplied Uniforms and a positive & honest work environment. Qualifications: • Some experience in vehicle maintenance and minor repairs, including the use of appropriate air and power tools., • Required to have or obtain basic set of hand tools and air tools or qualify for our tool program ($500 free tools)., • Must have or be able to obtain state inspectors license., • Some or limited training in automotive repair, with demonstrated ability and desire to learn and develop further in this area., • Ability to receive instruction and to follow rules and procedures. High School Diploma or equivalent preferred. Technical Degree a definite plus. Pay is based on experience and work history. If you want to work, learn a trade and be team player, we will compensate you for your efforts. Locations in Grapevine, Euless, and Arlington.

Job Description Job Brief: We are looking for a WAREHOUSE ASSOCIATE / PICKER PACKER to ensure the accurate and timely building and packing of orders. We are a small business with a family friendly culture which accommodates flexible working and new technology. The work environment includes preparing wholesale cufflink and jewelry accessory orders and Amazon FBA shipments in a climate-controlled preparation area, and apparel orders in the warehouse. There are opportunities to advance into office-based order processing roles over time. There are two shifts 1) Morning from 8:30am to 12:30pm, and 2) Afternoon from 1:00pm to 5:00pm. We are flexible on work hours posting shifts weekly, allowing employees to choose and trade shifts. We expect you to be detail orientated when it comes to ensuring the quality of orders. An ability to identify and report on small details and good color perception is required. Our website may be found at Responsibilities: • Build orders and position them on shipping table, • Pack orders before shipping and take size and weight, • Experience as order picker or other warehouse position preferred, • Able to read and write in English is required, • Great attention to detail and good color perception is required, • Diligent and punctual, • High school diploma or equivalent is preferredCompany DescriptionDubal Brothers is a menswear brand selling on Amazon and other platforms and to retail stores across the USA.Dubal Brothers is a menswear brand selling on Amazon and other platforms and to retail stores across the USA.

Job DescriptionJob Summary A successful campus Custodian is responsible for the cleanliness, upkeep, and presentation of the campus facilities. The successful candidate will effectively maintain the facility, help to create a positive environment, and have a strong customer service focus, both for students and staff. Key Responsibilities * Manage and maintain all Custodial needs * Cleaning * Restocking of supplies * Manage supply use and identify need for/submit orders as required * Take on or assist with projects as needed at the direction of the Executive Director * Follow oral and/or written instructions * Communicate effectively in both oral and written form * Establish and maintain cooperative and effective working relationships with those contacted in the course of work assignments. * Perform preventative maintenance * Follow and comply with all safety and work rules and regulations. * Other duties as assigned Experience and Education Required • Working knowledge of the Custodial trade, • Sufficient strength and physical dexterity to perform the duties and responsibilities of the job, including heavy liftingExperience and Education Preferred, • High School Diploma or GED, • 5 years of varied custodial/maintenance experience Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Prolonged periods sitting at a desk and working on a computer. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is usually not exposed to weather conditions. The noise level in the work environment is usually moderate. Note This is not necessarily an exhaustive list of all responsibilities, skills, duties, or requirements associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or require that other or different tasks be performed when circumstances change. I have read and understand the above job description. I further understand that this is not an all-inclusive list and does not constitute a contract. My employment remains at will as with all employees of Ancora Education.

Job DescriptionDescription: Job Summary The Service Technician is responsible providing exceptional service to our customers while performing on-site diagnostic, troubleshooting, preventive and corrective maintenance on a variety of gate and door systems. Essential Duties and Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Provides a positive, collaborative, and informative customer service experience to both residential and commercial customers. Diagnoses the nature of the issue triggering the service call. Confirms authorization to perform the repair, scope, and warranty-related issues are resolved before beginning work., • Performs all necessary preventative and corrective maintenance. Welds, wires, and programs customer equipment as required by the nature of the service call. Ensures all workplace health and safety requirements are met. Maintains housekeeping and security of customer locations and job sites., • Ensures device operates as intended and as desired by the customer. Closes out the call in Service Titan. Documents the scope of work completed and identifies any other malfunctioning customer equipment or opportunities for additional work., • Manages truck inventory and partners with support team to order or purchase specialized equipment, missing parts, and other components and tools. Please note this job description is not designed to over or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time without notice. Requirements: Required Education and Experience • Education and/or experience equivalent a High School diploma and 3 or more years working with gate operators, electronic controls, or other low-voltage electrical systems, or similar trade-related experience. Associates degree or vocational program with a focus on electro-mechanical systems preferred., • Familiarity with basic welding principles preferred., • At least 2 years of field service-related experience working on-site at customer locations and interacting with customers., • Communications: Able to communicate effectively in written and oral format with diverse individuals. Able to present information and respond to questions with peers, managers, clients, customers, and the general public on technical subjects. Able to read and comprehend written work instructions, technical documents, blueprints, manufacturer instruction manuals and other materials in English., • Math: Able to perform simple addition, subtraction, multiplication and division using standard units of measure and weight., • Reasoning: Able to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to develop logical troubleshooting techniques based on an understanding of the product performance and test requirements., • Time Management: Able to track and prioritize tasks in a fast-paced environment with several simultaneous projects/work orders. Able to work with minimal supervision., • Technology: Knowledge of email, texting, and work order systems sufficient for basic communication, reporting, and notes., • Physical Requirements: Able to push/pull/lift up to 50 lbs. frequently throughout the day. Able to stand, climb, walk, kneel, and crouch frequently, as required at a variety of customer locations/work sites. The physical environment for this position includes construction sites, warehouses, and outdoor customer locations. Frequently required to use and promote use of personal protective equipment to prevent injury. Travel Required Frequent day travel to and from job sites, vendor locations, and offices.

Job Description Salary: $33.00 to $36.00 per hour Facilities Electrician - Texas Health Harris Methodist Hurst-Euless-Bedford - 1st Shift Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at . Job Summary Electricians are responsible for inspecting, testing, repairing, installing, and modifying electrical components and systems. RESPONSIBILITIES: • Installing, maintaining, and repairing electrical control, wiring, and lighting systems., • Comfortable reading and understanding electrical blueprints, schematics, and diagrams, • Preform preventative maintenance on electrical systems and components, • Troubleshooting electrical issues using appropriate testing devices and making timely repairs., • Following National Electrical Code state and local building regulations., • Complete required documentation of repairs and service information, • Demonstrated ability to operate hand and power tools associated with electrical work safely, • Working knowledge of electrical theory, and the associated principles, materials, and equipment, • 3-5+ years of experience within commercial, industrial or healthcare setting, • Customer service/interpersonal skills, • Problem solving skills, • Analytical- computer skills, • Supervisory skills, • Financial acumen, • Presentation skills, • Journeyman's Electrical License, • Valid unencumbered Driver’s License Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1512947 Crothall Healthcare Abigail Van Eman [[req_classification]]

Job Description Summary: Graphic designer is responsible for the creative design and production of assigned projects to include, but not limited to ecommerce digital graphics, product packaging, product merchandising displays, planogram layouts, logos, and retail signage. The designer should have up to date skills and experience in the areas of design techniques and design technology, as well as be able to work in an organized project-oriented manner, with attention to both quality of design and project deadlines. Graphic Designer role will be located onsite at the Corporate Office in Arlington, TX Working hybrid model, 4 days/wk. onsite; 1 day/wk. remote Essential Duties and Responsibilities include the following. Other duties may be assigned. • Responsible for original design solutions, implementation, and execution. Use creative design to help solve complex messaging challenges on packaging, point of purchase materials, displays, and presentation materials, and maintain any current brand guidelines., • Support sales, marketing and product management with designs including but not limited to packaging, sell sheets, presentation templates, displays, catalogs, photography, digital, motion & static assets, trade show artwork and other needs., • As needed, revise existing package designs when product information or branding message changes., • Collaborate with cross-functional teams to develop strategy and communicate with appropriate individuals and departments concerning project updates, changes, timelines, and deadlines., • Work with the team to maintain the proofing and approval process in Lytho Workflow, • Research packaging and multimedia tactics are being used in the pet industry and in other related industries to stay on top of emerging trends., • Proof all/applicable artwork from the printer and vendors. Supervise the production of color-printed work for best quality on POP labels, packaging, and sales support literature., • Research and recommend cost-effective production alternatives for each project and management of the creative production process, from timeline development to finished materials and work with vendors to gain multiple print quotes per project to ensure the lowest costs possible., • Attend and prepare for department meetings. Come prepared to discuss current projects, challenges, ideas, and missing items needed to complete project on time and correctly., • Participate in project management meetings., • When applicable, work with outside designers, photographers, and other vendors in a productive and professional manner. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: Bachelor of Fine Arts degree (BFA) or equivalent from four-year college or technical school; and 3 years related experience working in graphic design in a consumer goods environment, brand, agency, manufacturer. A strong working knowledge of 4 color process and digital printing, and preparation of artwork for process printing & digital delivery for the ecommerce channel. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Must have systematic analytical skills. Computer Skills: To perform this job successfully, an individual should have competent knowledge of Current Apple OSX platform, Adobe Creative Cloud, Microsoft Office Suite, experience and knowledge with AI, 3D, video & motion software a plus. Petmate is an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law.