Trade school jobs in Dallas, TexasCreate job alerts

Compensation Type: Hourly Highgate Hotels: Highgate is a premier real estate investment and hospitality management company widely recognized as an innovator in the industry. Highgate is the dominant player in U.S. gateway markets including New York, Boston, Miami, San Francisco and Honolulu, with a rapidly expanding presence in Europe, Latin America, and the Caribbean. Highgate’s portfolio of global properties represents an aggregate asset value exceeding $20B and generates over $5B in cumulative revenues. The company provides expert guidance through all stages of the hospitality property cycle, from planning and development through recapitalization or disposition. Highgate also has the creativity and bandwidth to develop bespoke hotel brands and utilizes industry-leading proprietary revenue management tools that identify and predict evolving market dynamics to drive out performance and maximize asset value. With an executive team consisting of some of the industry’s most experienced hotel management leaders, the company is a trusted partner for top ownership groups and major hotel brands. Highgate maintains corporate offices in London, New York, Dallas, and Seattle. Location: Residence Inn Addison 14975 Quorum DrDallas, TX 75254 Responsibilities: • Assist with the operation maintenance and repair of equipment., • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair touch up paint minor furniture repair tub caulking tile repairs etc., • Perform preventative maintenance for ice machines refrigerators kitchen equipment laundry equipment HVAC guestrooms meeting rooms the swimming pool and hot tub., • Perform plumbing repair laundry equipment repair preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request., • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings., • Perform other tasks/jobs as assigned by the supervisor or manager. Qualifications:, • Experience in a hotel or a related field preferred., • High School diploma or equivalent required., • Licensed in a trade preferred (plumbing electrical HVAC carpentry etc.)., • Must have a valid driver’s license for the applicable state., • Must have an acceptable MVR (Motor Vehicle Driving Record) property specific.

Job Description Become a vital part of the Dallas Market Center team as a Building Maintenance Technician! In this role, you'll play a key role in ensuring our vast facilities remain comfortable, safe, and operate efficiently. Your expertise in maintenance will contribute significantly to the daily experiences of our exhibitors, buyers, and employees, making our market center a standout venue in Dallas. Join us and take pride in maintaining a bustling hub of commerce and innovation. Key Responsibilities: • Perform repairs, routine maintenance, and preventive inspections on HVAC, electrical, and lighting systems to ensure optimal performance., • Conduct detailed inspections of HVAC components including chillers, air handlers, and cooling towers to preemptively identify issues., • Collaborate on installing new HVAC units and major equipment overhauls., • Address and resolve hot/cold complaints and other issues promptly to ensure customer satisfaction., • Rotate duties to monitor startup and shutdown of chillers, lights, and escalators., • Maintain accurate records of maintenance activities using the work order system., • Assist in planning and executing building maintenance projects., • Respond to service requests and provide support during afterhours events., • Work closely with a supportive team on various maintenance projects, including routine inspections and preventive maintenance., • High School Diploma or equivalent., • Level 3 HVAC Certification or HVAC License., • EPA Section 608 Certification for handling refrigerant.Company DescriptionDallas Market Center is a global business-to-business trade center and the leading wholesale marketplace in North America connecting retailers and interior designers with top manufacturers in home decor, furniture, gifts, lighting and fashion. Inside its dynamic, five million square foot campus near downtown Dallas, nearly 200,000 customers from all 50 states and 85 countries seek industry trends, business education and new products via open-daily showrooms and from exhibitors participating in trade events held throughout the year. Benefits -\tMedical, Dental, Vision, and Pet Insurance -\tLife and AD&D Insurance at no cost -\t401(k) with company match -\tPaid time off and holidays -\tEmployee discounts at food outlets onsite, including Starbucks -\tWellness offerings such as flu shot clinics and CPR certification -\tFree, covered parking with secure card access -\tAccess to private events such as trade shows, sample sales, and seminarsDallas Market Center is a global business-to-business trade center and the leading wholesale marketplace in North America connecting retailers and interior designers with top manufacturers in home decor, furniture, gifts, lighting and fashion. Inside its dynamic, five million square foot campus near downtown Dallas, nearly 200,000 customers from all 50 states and 85 countries seek industry trends, business education and new products via open-daily showrooms and from exhibitors participating in trade events held throughout the year.\r\n\r\nBenefits\r\n•\tMedical, Dental, Vision, and Pet Insurance\r\n•\tLife and AD&D Insurance at no cost\r\n•\t401(k) with company match\r\n•\tPaid time off and holidays\r\n•\tEmployee discounts at food outlets onsite, including Starbucks\r\n•\tWellness offerings such as flu shot clinics and CPR certification\r\n•\tFree, covered parking with secure card access\r\n•\tAccess to private events such as trade shows, sample sales, and seminars

Job Description JOB SUMMARY The incumbent in this role will float as needed between two hospitals, East Houston and River Oaks. The role requires a working knowledge of maintenance principles, theories, and operations. Knowledge of basic hand and power tools. Good oral and written communications skills. Ability to work with peers in a team situation. This position provides for the ongoing operation of all main hospital and outlying clinic systems, utilities, facilities and equipment. The incumbent maintains all hospital and clinic properties through repair, preventative maintenance, groundskeeping and safety inspections in accordance with Hospital standards. DUTIES AND RESPONSIBILITIES • This position will be primarily responsible for minor maintenance repair duties i.e., performing duties necessary to keep the physical structure and associated equipment of the facility in good repair/condition. The incumbent will be responsible for performing:, • Preventive Maintenance (PM) duties to all physical structures of facilities, complying with all safety codes., • May perform general facility floor/wall repairs and painting as needed., • Performing routine maintenance around the building such as fixing structural damage, for example, window, door or wall repair., • Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures., • Working on damaged electrical wiring when a shortage or severed wire occurs., • Maintaining the building HVAC equipment to keep climate control in the facility functioning properly., • Responds to customers’ comments or informal complaints about hospitals systems or operations and has recommendation to supervisor within 24 hours., • Applying preventative measures to the building to reduce the risk of future problems, such as using a sealant on a flat roof., • Fixing potential safety hazards to avoid injuries., • Painting the building when old paint has become faded or chipped., • Pressure Washing and Floor Maintenance duties., • Must conduct oneself in a professional and ethical manner; maintain good rapport with fellow workers, supervisors, administrations, nursing staff, patients, visitors, and other hospital personnel; must be relied upon to work independently and unsupervised exercising good judgment., • Other duties assigned. REQUIREMENTS • High School Diploma or GED, • Two (2) years maintenance related experience and/or training, hospital experience preferred., • Must have valid Driver's License and Insurance, and Good Driving Record., • Experience in trade, HVAC, mechanical, plumbing, electrical, refrigeration, carpentry, electronics, wastewater treatment, painting. Advanced skills in the building trades or construction preferred., • Verbal and written abilities are required to accept and comprehend orders; must complete tasks despite frequent interruptions. EDUCATION • High School Diploma or GED CERTIFICATION, LICENSURE • N/A Required, • Any related KNOWLEDGE SKILS AND ABILITIES • Strong knowledge of healthcare facility systems and equipment., • Team player with a positive personality and strong commitment to employer, • Strong organizational, communications and interpersonal skills., • To pay attention to detail to ensure all jobs are completed in an exemplary manner and any potential hazards or to ensure warning signs of problems are not overlooked.

Job Description Start a hands-on career in a growing industry! Hose Tech USA, the leader in onsite service and industrial/hydraulic hose products, is celebrating 25 years of excellence with 8 locations across Texas—and we’re growing! Our Irving location is hiring a Full-Time Shop Helper to join our team. If you’re mechanically inclined and eager to learn a new trade, this is your opportunity to build a long-term career with a company that values hard work, teamwork, and growth. Benefits: • Medical, Dental, Vision, & Life Insurance, • 401(k) with company match, • Paid Holidays & PTO, • Performance rewards, • Uniforms provided, • Assemble hose products based on work orders, • Assist with shipping/receiving and inventory (pulling, stocking, verifying inbound shipments), • Handle material movement and occasional delivery or pickup of parts, • Maintain shop, warehouse, and outdoor areas in clean, safe condition, • Keep company vehicles clean and organized, • 1–3 years of general work experience (mechanical aptitude a plus!), • Strong communication and customer service skills, • “All hands on deck” team mentality, • High school diploma or equivalent, • Valid driver’s license with clear driving record, • Able to pass a pre-employment drug screening, • Legally authorized to work in the U.S., • Career growth: We invest in hands-on training and promote from within, • Competitive pay + full-time hours (40 hours/week, Monday–Friday)

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: Competitive pay from$30-$50 hourly., • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectations, • Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner., • Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base., • Test malfunctioning systems and components using electrical and/or mechanical skills., • Maintain legible corporate and personal records of work history., • Provides department support by processing job tickets, and work orders to the necessary department promptly., • Provide support by picking up, delivering, and installing cases., • Perform work on minor construction and remodeling projects including startups of new installations., • Drives company vehicle in a safe manner., • Performs other related duties and projects as assigned by management. Qualifications:, • High school diploma/GED., • EPA certification., • Certification from an accredited vocational-technical or trade school is a plus!, • Minimum 3+ years of commercial refrigeration experience required., • Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus., • Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful., • Must have a good driving record and be able to work independently., • Emergency on-call availability is a basic requirement., • Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job Description Bane Machinery is the authorized distributor for several major construction equipment manufacturers including Kobelco, Link-Belt Excavators, Hitachi, Dynapac, Terex Trucks and Liebherr. We provide dedicated sales, rentals, parts and service support for our customers. For more information about Bane Machinery log on to . Job Types: Full Time Location: Ability to commute daily to Dallas, TX. Availability required: Must be available Monday – Friday; 7:00 a.m. – 5:00 p.m. and one to two Saturdays per month 7:00 a.m. – 12:00 p.m. Bane Machinery, Inc. has an immediate need for a Parts Associate for their Parts Department supporting the Heavy Equipment Industry. This role would provide customer support for the sale and fulfillment of parts orders for internal and external customers. Basic Responsibilities: • Ordering parts for customers, ensuring accuracy of the order and following up until parts are delivered to the customer, • Responding promptly to customer phone calls and inquiries to fulfill customers’ needs, • Maintaining a clean and safe work environment, • Keeping parts and service manuals and reference materials organized for easy access, • Demonstrating proactive communication with internal and external customers regarding parts order timing and receiving, • Ensuring all quantities of parts are accurately and timely received and shipped based on customers’ needs Requirements • Ability to communicate effectively, utilizing both verbal and writing skills., • Demonstrates effective communication, interpersonal skills, organizational ability, • Proficiency in Microsoft Office and ability to use and adapt to new technology systems and tools, • Knowledge of heavy equipment industry, construction machinery parts, or related field, • Ability to follow and interpret OEM documentation via various manufacturer websites and systems, • Must be able to speak, read and write the English language, • Must be available to work some overtime and one to two Saturdays per month, to accommodate business needs Education • HS Diploma or GED (Required), • 6 months to 1-year previous parts experience, preferably in the construction machinery field, • Trade or Technical School, mechanically inclined (Preferred), • Must pass MVR (Motor Vehicle Record) background check and have a valid State issued Driver License Experience • Ability to navigate and understand parts breakdowns to order parts correctly: 1+ years (preferred), • Customer service: 1+ years · Benefits package which includes medical, dental & vision, 401(k) · Paid time off via Vacation, PTO and Holiday Pay · Training and development · Career growth opportunities Bane Machinery, Inc. is an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description Summary: Employee’s level and pay will be dependent on their level of experience, knowledge, and capabilities. The Counter Sales Representative is a resource for immediate service and product knowledge for our customers. Provides excellent customer service by assisting customers promptly and courteously with their purchases and efficient processing of their orders. Works closely with the branch team to assist in receiving, shipping, and stocking. What You'll Do: • Provide excellent customer service by assisting customers promptly and courteously with their purchases and processing of their orders or returns, • Assist in driving electrical distribution sales for our counter business and developing new and existing customer relationships, • Assist with daily restocking, showroom maintenance, and keeping showroom and counter clean and organized, • Assist with warehouse functions as needed, including receiving, shipping, stocking, and deliveries, • Stay informed and educated on product knowledge, • Assist inside sales as needed, • Inform manager of any potentially hazard or elevated situation pertaining to safety or the satisfaction of a customer, • Perform other duties as assignedQualifications, • High School or GED - Required, • Electrical product knowledge and experience, including lighting, switchgear, controls, and electrical commodities preferred, • Demonstrated knowledge and experience of electrical distribution or other electrical sales environments preferred, • Familiarity with automated order entry systems & PCs running Windows-based software preferred, • Strong negotiation and interpersonal skills, including the ability to communicate on all levels within internal and external groups, • Strong written and verbal communication skills, • Good team player, • Strong organizational skills, • Ability to work efficiently and meet tight deadlines, • Ability to type on a computer keyboard, • Great attitude, • Desire to improve electrical product knowledge Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Frequently – 21% to 50%, • Walk: Must be able to move about inside/outside office or work location - Constantly – at least 51%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Constantly – at least 51%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Talk, hear, taste, smell: Must be able to use senses to effectively communicate with co-workers and clients and detect hazardous conditions - Constantly – at least 51% Weight and Force Demands: • Up to 10 pounds - Constantly – at least 51%, • Up to 25 pounds - Frequently – 21% to 50%, • Up to 50 pounds - Occasionally – up to 20% Working Environment: • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Occasionally – up to 20% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job DescriptionDescription: Job purpose: Reporting to the VP of Asset Management, the Used Equipment Sales Representative will be responsible for prospecting, soliciting, and acquiring new customers leveraging all used equipment part of C.A.T. North America’s group of companies. This individual will build and maintain strong customer relationships, evaluate trade-ins, manage inventory, and ensure an excellent customer experience. His/her first mandate is to sell used equipment, mainly heavy-duty highway trucks, 53’ trailers including dry vans, heated trailers, flat decks, and others, to new and existing customers in support of profitability objectives. Part of the role is to develop a pricing strategy aligned with the ever-evolving used equipment market in North America, and sourcing solutions for both short term and long-term opportunities. Navigate sale cycle from lead, prospect, develop, quote and close. Responsibilities: • Prospect for leads to building a solid recurrent customer base, including heavy cold calling., • Find new customers and drive new sales opportunities by identifying key decision makers and determining the appropriate approach., • Identify and pursue new sales opportunities through cold calling, referrals, and networking., • Contact and conduct initial discoveries with customers via phone and email., • Facilitate face-to-face meetings, present proposals and solutions, close business., • Maintain close relationships with new and existing customers to ensure recurrent sales and continuous engagement., • Translate business opportunities into incremental revenues for growth. Manage multiple requests simultaneously with organized skill., • Collaborate internally with various teams from various divisions regarding pricing and marketing strategies, equipment preparation, and account implementation plans., • Collaborate with the inventory manager to maintain accurate records of available used equipment., • Evaluate and appraise trade-in vehicles for resale value., • Coordinate with service and reconditioning departments to prepare equipment for resale., • Maintain and update inventory listing and website., • Works with the executive team to ensure alignment with opportunity development, planning and forecasting., • 2-5 Years of prior sales experience in any field., • High school diploma or equivalent required; associate or bachelor’s degree is a plus., • Valid driver’s license; CDL is a plus., • Technical knowledge related to heavy trucks and trailers., • Ability to navigate through internal CRM software., • Ability to work well with others in a fast paced, dynamic environment., • Ability to work independently., • Excellent communication skills, both written and verbal., • Must be able to inspect and walk around equipment in varying weather conditions., • Demonstrated ability to effectively network and build relationships with key internal and external stakeholders., • Demonstrated ability to multi-task and follow through

Job Description Overview The South Dallas Sales Representative is responsible for developing and executing targeted marketing campaigns to attract new clients and improve retention. This role builds strong relationships with contracted vendors and providers to ensure high-quality service and care through regular patient interactions. The Sales Rep also engages with the community to promote services, identify individuals with potential care coordination or case management needs, and support referrals. Working closely with internal teams, this role helps align outreach efforts with organizational goals while monitoring market trends and performance metrics. This position requires strong communication skills, a proactive mindset, and a commitment to improving healthcare access in the South Dallas area. Responsibilities: * Meet with patients and families to discuss HCP of Texas home health services. * Act as the liaison for HCP of Texas between our referral sources, patients and their families, and the office. * Submit any required documents to vendors for required credentialing to enter facilities. * Devise a marketing campaign with the goal of increasing client base and generations of referrals. * Plan, Organize, and execute marketing programs. * Trade shows and events to market services. * Attend mandatory company meetings. * Manage individual marketing budget. * Communicate with Intake to verify and confirm clear receipt of referrals. * Review the Intake log throughout the day to accurately follow pending referrals and the admission or non-admit of referrals. * Keep abreast of health industry trends, competition and new opportunities. * Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Skills and Requirements: * A proven track record in the Home Health industry. * A desire to provide the highest level of customer service. * Ability to persuade referral sources by presenting the benefits of HCP of Texas. * Strong verbal and written communication skills. * Education: High School Diploma or equivalent Powered by JazzHR I4EjgSJyvy

Job Description Position Summary: Maintains the cleanliness and safety of the DMC buildings Position Description: • Ensures that restrooms are clean, stocked and sanitized, • Ensures that meeting and event rooms are clean and orderly, • Effectively maintains all public space throughout DMC campus, • Removes and properly disposes of trash throughout DMC campus, • Maintains carpeted areas; vacuums and spot cleans as necessary Required Experience: Previous custodial experience preferred, but not required Physical Requirements: • Walk and stand for vast majority of shift, • Able to lift up to 50 lbs Company DescriptionDallas Market Center is a global business-to-business trade center and the leading wholesale marketplace in North America connecting retailers and interior designers with top manufacturers in home decor, furniture, gifts, lighting and fashion. Inside its dynamic, five million square foot campus near downtown Dallas, nearly 200,000 customers from all 50 states and 85 countries seek industry trends, business education and new products via open-daily showrooms and from exhibitors participating in trade events held throughout the year. Benefits -\tMedical, Dental, Vision, and Pet Insurance -\tLife and AD&D Insurance at no cost -\t401(k) with company match -\tPaid time off and holidays -\tEmployee discounts at food outlets onsite, including Starbucks -\tWellness offerings such as flu shot clinics and CPR certification -\tFree, covered parking with secure card access -\tAccess to private events such as trade shows, sample sales, and seminarsDallas Market Center is a global business-to-business trade center and the leading wholesale marketplace in North America connecting retailers and interior designers with top manufacturers in home decor, furniture, gifts, lighting and fashion. Inside its dynamic, five million square foot campus near downtown Dallas, nearly 200,000 customers from all 50 states and 85 countries seek industry trends, business education and new products via open-daily showrooms and from exhibitors participating in trade events held throughout the year.\r\n\r\nBenefits\r\n•\tMedical, Dental, Vision, and Pet Insurance\r\n•\tLife and AD&D Insurance at no cost\r\n•\t401(k) with company match\r\n•\tPaid time off and holidays\r\n•\tEmployee discounts at food outlets onsite, including Starbucks\r\n•\tWellness offerings such as flu shot clinics and CPR certification\r\n•\tFree, covered parking with secure card access\r\n•\tAccess to private events such as trade shows, sample sales, and seminars

Job Description Title:MIG Welder 2nd Shift Location:Sunnyvale TX Hours:2nd Shift M-F 3:30pm - 12am (OT on Saturdays as needed) Please send resumes to: Type:Temp-to-Perm Pay Rate: $16.00 - $18.00/hr. Starting Pay Rate based on previous job experience and test results. Our client is seeking experienced welders/fitters in fabrication and/or assembly of heavy structural weldments and/or construction industry equipment. Duties/Responsibilities: -Perform welding duties using wire welding FCAW (Flux Core Arc Welding) and GMAW (Gas Metal Arc Welding). -Perform welding in various positions. -Weld steel components on equipment with appropriate welding equipment in accordance with the material(s) required for the blueprints, diagrams, work orders, instruction (oral and written), process, specified procedures, layouts, and all other quality requirements. -Individual welds range from simple tack welds to complex welds, performed in varying positions and spaces. Welding work involves set-up and laying out work using templates and fixtures to modify, fabricate, or repair equipment parts and/or products. -Operate or use various air, power, hand tools including Air Arc, welding gun, grinders, wrenches, hammers, cutting torches, drills, punches, scrapers, and others. Also operate or use forklifts, and cranes and overhead hoists with associated rigging equipment. -Keep welding equipment and tools operational by completing preventive maintenance requirements, troubleshoot malfunctions, follow manufacturer’s instructions, call for repairs, and complete daily check sheets. -AWS 4G qualification skills are the minimum requirement for all Vince Hagan Welder positions. -Inspect, clean, and improve welds as necessary to meet rigorous Vince Hagan product and quality specifications. Continuously strive to improve your work-related skills, efficiency, and the quality of output. -Use a computer to access and open/close computer documents, perform data entry in Company’s ERP software, and other basic computer skills. -Fulfill work requirements according to Vince Hagan quality standards determined for the assigned work tasks, including incoming and outgoing quality checks, and other quality inspections as required by management. Document actions by completing production and quality forms. -Maintain a safe, organized, and clean working environment following the Company’s guidelines and Hazardous Waste Management programs. -Conserve resources by appropriately and efficiently using equipment and supplies as needed to accomplish work tasks. -Use Vince Hagan property with care and respect, help maintain it in good working condition, and retain it on premises. -Interact with fellow Vince Hagan employees, customers, and management in a cooperative, supportive, and courteous manner; comply with Vince Hagan policies, procedures, rules, and regulations. -Perform or assist in other assigned duties as qualified and trained. -Must complete and maintain forklift operation certification and be able to safely operate a forklift when necessary. Education/Experience: -Must pass administered weld test to be considered for this position. -High School Diploma or General Education Degree (GED) preferred. -2 years of MIG welding experience required.TIG not necessary. -Relevant trade school or college course work desired. -Ability to correctly use and read a tape measure, and read/understand job-related blueprints, required. -Heavy equipment manufacturing experience desired. -Computer experience desired. -Bilingual speakers are desired. -Must be dependable, dedicated to completing work assignments correctly, and use time wisely. -Adaptable at solving problems, to new situations and challenges, potential policy changes, and new ideas. -Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision. -Ability to work with others respectfully and professionally in a team environment. -Ability to communicate clearly and completely, expressing needs, and asking questions. -Ability to apply common sense understanding to carry out detailed and written and/or oral instructions. -Ability to handle the stress that accompanies production standards and deadlines. You should be proficient in: • Soldering, • MIG Welder, • TIG Welder, • Stick Welder, • Flux-Cored Arc Welder $16 - $22 / hr

Job Description Title:MIG Welder 2nd Shift Location:Sunnyvale TX Hours:2nd Shift M-F 3:30pm - 12am (OT on Saturdays as needed) Please send resumes to: Type:Temp-to-Perm Pay Rate: $16.00 - $18.00/hr. Starting Pay Rate based on previous job experience and test results. Our client is seeking experienced welders/fitters in fabrication and/or assembly of heavy structural weldments and/or construction industry equipment. Duties/Responsibilities: -Perform welding duties using wire welding FCAW (Flux Core Arc Welding) and GMAW (Gas Metal Arc Welding). -Perform welding in various positions. -Weld steel components on equipment with appropriate welding equipment in accordance with the material(s) required for the blueprints, diagrams, work orders, instruction (oral and written), process, specified procedures, layouts, and all other quality requirements. -Individual welds range from simple tack welds to complex welds, performed in varying positions and spaces. Welding work involves set-up and laying out work using templates and fixtures to modify, fabricate, or repair equipment parts and/or products. -Operate or use various air, power, hand tools including Air Arc, welding gun, grinders, wrenches, hammers, cutting torches, drills, punches, scrapers, and others. Also operate or use forklifts, and cranes and overhead hoists with associated rigging equipment. -Keep welding equipment and tools operational by completing preventive maintenance requirements, troubleshoot malfunctions, follow manufacturer’s instructions, call for repairs, and complete daily check sheets. -AWS 4G qualification skills are the minimum requirement for all Vince Hagan Welder positions. -Inspect, clean, and improve welds as necessary to meet rigorous Vince Hagan product and quality specifications. Continuously strive to improve your work-related skills, efficiency, and the quality of output. -Use a computer to access and open/close computer documents, perform data entry in Company’s ERP software, and other basic computer skills. -Fulfill work requirements according to Vince Hagan quality standards determined for the assigned work tasks, including incoming and outgoing quality checks, and other quality inspections as required by management. Document actions by completing production and quality forms. -Maintain a safe, organized, and clean working environment following the Company’s guidelines and Hazardous Waste Management programs. -Conserve resources by appropriately and efficiently using equipment and supplies as needed to accomplish work tasks. -Use Vince Hagan property with care and respect, help maintain it in good working condition, and retain it on premises. -Interact with fellow Vince Hagan employees, customers, and management in a cooperative, supportive, and courteous manner; comply with Vince Hagan policies, procedures, rules, and regulations. -Perform or assist in other assigned duties as qualified and trained. -Must complete and maintain forklift operation certification and be able to safely operate a forklift when necessary. Education/Experience: -Must pass administered weld test to be considered for this position. -High School Diploma or General Education Degree (GED) preferred. -2 years of MIG welding experience required.TIG not necessary. -Relevant trade school or college course work desired. -Ability to correctly use and read a tape measure, and read/understand job-related blueprints, required. -Heavy equipment manufacturing experience desired. -Computer experience desired. -Bilingual speakers are desired. -Must be dependable, dedicated to completing work assignments correctly, and use time wisely. -Adaptable at solving problems, to new situations and challenges, potential policy changes, and new ideas. -Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision. -Ability to work with others respectfully and professionally in a team environment. -Ability to communicate clearly and completely, expressing needs, and asking questions. -Ability to apply common sense understanding to carry out detailed and written and/or oral instructions. -Ability to handle the stress that accompanies production standards and deadlines. You should be proficient in: • Soldering, • MIG Welder, • TIG Welder, • Stick Welder, • Flux-Cored Arc Welder, • Laser Welder

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. As a trusted leader in systems integration and alarm monitoring, we bring the Securitas Technology Difference to life— delivering a comprehensive suite of video surveillance, access control, intrusion detection, fire safety, and integrated security solutions. As we continue to experience rapid growth in our Electronic Security division, we are seeking an Account Executive to drive new business development in our Core Commercial division. This role focuses on lead generation, relationship building, and presenting our commercial electronic security products and services to prospective clients. Job Responsibilities: • Manage a defined territory using CRM tools, skilled in cold calling, networking, lead generation, and negotiation., • Demonstrate ability to develop and implement comprehensive service/account outsourcing strategies, • Identify and pursue new business opportunities within the core commercial market segment., • Prepare and present tailored proposals and solutions based on client needs and industry trends., • Collaborate with internal specialists to design and deliver custom solutions for complex client needs., • Participate in networking events, trade shows, and industry forums to build brand presence and identify prospects., • Conduct a minimum of 10 in-person client meetings per week within the assigned territory to foster relationships, drive engagement and new business., • High School diploma or GED required; Bachelor’s degree preferred, • At least 2 years of experience in B2B sales with a consultative approach., • Minimum 2 years of experience attaining or exceeding high sales quotas in comparable accounts and/or markets, • Proficient in leveraging Office Suite and CRM platforms to streamline workflows, increase productivity, and enhance client interactions., • Travel is required across assigned geographic areas, • Highly organized, detail-oriented, and an effective communicator, • Background in electronic security sales is strongly preferred, • Base salary plus competitive commission on product and recurring revenue sales, • Monthly auto allowance, • Paid company training and development, • Medical, Dental, Vision, Life, and Critical Illness Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Tuition Reimbursement, • Exceptional career advancement opportunities, • Exclusive employee discounts on travel, electronics, and more We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our clients and the communities we service.

Job Description SPRINKLER CONSTRUCTION HELPER JOB DESCRIPTION Job Responsibilities include but are not limited to: • Learn by paying attention and participating with all that is being asked within all aspects of the fire sprinkler trade, • Assist foreman and/or fitter with installation, service, and trouble-shooting of automatic fire sprinkler systems along with all its related equipment, • Assist foreman and/or fitter with installation of fire sprinkler systems in residential, commercial, and industrial buildings, • Learn and use project drawings to accurately and entirely interpret and installation requirement details and layout as needed, • Learn to thread and groove pipe, cut hanger rods, frequently climb ladders, hang pipe, read blueprints, layout, keep clean work area, and use appropriate equipment for any specific job such as tools, lifts, etc., • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Basic Math and Reading, • Ability to take direction from upper management, • Must have valid state driver's license and good driving record, • Self-motivated, Ambitious, Interactive, Communicative, Detail-oriented and Organized, • Demonstrate ability to accurately read measurements from tape or scales

Job Description Cirks Construction Inc. (CCI), dba KDC Construction is a leader in the construction industry with diverse individuals dedicated to our people, customers, projects, and community. We are maintaining a strong focus on building a culture that encourages our employees to grow personally and professionally. KDC is also a proud recipient of the Top Workplaces 2022, 2023, and 2024, presented by the Orange County Register. KDC offers a competitive salary/hourly range $25.50 to $38.50- while considering the candidate’s experience and a comprehensive benefits package for full-time employees: Performance Expectations Striving to be the leader in construction and facilities services by exceeding customer expectations begins with each employee. Through the individual contributions of our employees, we can support our core values. For you to help us accomplish this goal, we ask for you to SMILE. Synergy – bring a cooperative spirit to your team and neighboring departments. Marketing – understanding that through your contributions, you aid in the overall success of our Company. Innovation – continuous efforts to see beyond current business modes and methods. Longevity – understanding that tenure with the organization is achievable as a committed team member. Excellence – bring your whole self to work. Applying your knowledge, skills, and abilities to ensure that every task you perform is performed at the highest level. Job Description 1. Services work orders at various customer locations., 2. Performs requested minor equipment and building repairs., 3. Respond to Priority 1 emergency safety concern requests for employees or customers, health department shut-down, city official shut-down, or substantial impact on sales., 4. Responsible for daily updates detailing store visits, on-site times, and schedule changes., 5. Documents daily work activity, appropriately photographs existing job site conditions/work completion, and responds to management team inquiries., 6. Assists with updating store-level facility records by submitting all completed paperwork as required., 7. Maintains personal tool inventory., 8. Responsible for maintaining company vehicle and parts inventory., 9. Inspect and troubleshoot systems to identify necessary repairs., 10. Travels to different worksites to complete required tasks and projects., 11. Responsible for working safely, adhering to all aspects of our Health, Safety, and Environmental Program, and supporting all Company safety efforts., 12. Other duties as assigned. • Medical insurance, • Dental HMO and PPO insurance, • Vision insurance, • Life/AD&D insurance, • Flexible Spending Accounts – Unreimbursed Medical and Dependent Care, • 401(k) retirement plan, • Vacation and Sick Time, • Holidays, • Additional Job Description 1. Must have a flexible schedule and work some nights and weekends., 2. High school diploma or equivalent., 3. General trade or Handyman experience with basic electrical, plumbing, carpentry, flooring, and drywall., 4. Possess the vehicle and tools required to perform job functions., 5. Ability to interact with a diverse customer roster., 6. Carefully consider cost/benefits., 7. Demonstrates attention to detail, creative problem-solving, and analytical skills., 8. Self-motivated and works independently., 9. Able to deliver a positive experience to the customer., 10. Follows all Company and customer policies and procedures., 11. Has passion, energy, persistence, positive attitude, and enthusiasm., 12. Proficient with computers and familiar with Microsoft Software Suite., 13. Must possess or obtain an appropriate state driver’s license before employment, a clean driving record, and reliable transportation.

Job Description ALARM HELPER JOB DESCRIPTION Job Responsibilities include but are not limited to: • Learn by paying attention and participating with all that is being asked within all aspects of the fire alarm trade, • Assist technician with installation, service, and troubleshooting of fire alarm systems along with all its related equipment, • Assist technician with installation of fire alarm systems in residential, commercial, and industrial buildings, • Learn and use project drawings to accurately and entirely interpret and installation requirement details and layout as needed, • Learn to pull wire, mount back boxes, terminate devices, frequently climb ladders, read blueprints, layout, keep clean work area, and use appropriate equipment for any specific job such as powered hand tools, tools, lifts, etc., • Other duties as assigned Expectations: • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Basic Math and Reading, • Understand and follow basic Safety procedures, • Physical stamina and ability to perform laborious and strenuous work for extended hours, including overtime up to 20 hours per week, if necessary, • Good communication skills, • Sense of pride, integrity, and organizational ability, • Must enjoy working independently and outdoors

Job Description Primoris Gas Operations which consist of companies such as Q3 Contracting, ARB, Primoris Distribution Services, Snelson and Pipejacking Trenchless has over 60 years of experience working in the natural gas distribution industry. Over this time, we have maintained numerous customer relationships spanning more than two decades. Providing a safe environment, quality workmanship, and exceptional value to our customers is the foremost focus of our operations Are you ready for a “POWER-FULL-TIME” career change? If yes, Primoris Power Delivery is looking for YOU! The Total Rewards Proposition: SHOP MECHANICS NEEDED, Balch Springs, TX • Competitive compensation paid weekly. Starting at $28 per hour, based on experience., • Best-in-class; Medical, Dental, Vision, and LTD/STD., • 401(k) with company match, vested day-one., • Employee Stock Purchase Plan [ESPP]., • Tuition Reimbursement., • Paid Time Off, Holiday Pay, and Community Service Paid Time Off., • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage, • Award winning safety programs., • Overtime opportunities., • Growth Opportunities., • Practice safety rules., • Follow verbal and written instructions., • Safe use of hand & power tools., • Report to and assist immediate supervisor., • Perform quality work as determined by project specifications., • Accountable for all tools and materials at the end of your shift., • Must work well as part of a team., • High school diploma or GED, • A two-year technical, vocational or trade school diploma or degree in auto, truck, and/or heavy equipment is desired, • Fluid Power Society and/or ASE certifications desired, • Must possess ability to utilize various electronic diagnostic equipment and make minor and major repairs to electrical, hydraulic, air conditioning, gasoline and diesel systems., • Work will primarily be performed in shop conditions, although mobile work may be required from time to time. In this case, this position may involve some overnight travel as well as travel out of state and the employee will be expected to travel as needs and job requirements dictate., • Employee will be expected to work overtime as the company determines based upon job requirements., • Individual selected must be able to work in a team environment as well as independently with minimal supervision., • Candidate must be highly motivated and customer service driven. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement.

Job Description I. Position Identification Job Title PCLT Territory Manager (Texas) Job Function Sales Report to Regional Director II. Job Purpose As Hankook Tire's brand awareness grows, it is an exciting time to join our sales team as a Territory Manager representing one of the fastest growing tire brands in America. The Territory Manager strives to achieve assigned territory sales goals through partnerships with tire wholesalers, distributors and dealers. III. Key Accountabilities Act as primary contact for Hankook Tire America to dealer network within geographic area as assigned Inform dealers of all essential Hankook programs, policies and new products Handle all dealer issues and concerns, maintaining excellent customer service Train and work with dealer personnel as required Obtain current market information and trends in order to maintain awareness of competition Establish Hankook Tire brand awareness Prospect new business Monitor territory sales performance Submit all reports as required Attend industry trade shows as needed Any other duties/responsibilities as assigned by Management IV. Level of Accountabilities Responsible for managing sales for a specific geographic territory Builds relationships with decision makers at wholesalers, distributors, and dealers V. Core Competencies Computer skills Communication skills Organizational and follow-up skills VI. Qualification High School diploma required, college preferred Minimum 5 years outside sales experience Valid driver's license Industry experience required Must be able to travel 70% of the time within the territory. Must Live in Texas, preferably in the Dallas/Fort Worth area.

Job Description Gojob is hiring Electrical Technicians for a multinational company located in Red Oak, TX. This role requires you to speak English. You will be responsible for conducting electrical installations as part of the assembly process, performing integration solutions work within the facility, and assisting in the start-up and commissioning of modular data centers. This is a production environment. As a Gojobber, you will enjoy weekly pay, excellent communication from recruiters, the opportunity to build a career, health insurance and more! Shift & Pay: • Monday - Wednesday or Thursday - Saturday, 6:00 am to 6:00 pm, • Pay: $27 per hour (work 36 / paid 40), • Installs, repairs, and maintains the electrical parts of industrial equipment., • Works individually or as part of a team to successfully complete projects., • Follows safety procedures and adheres to electrical codes., • Correctly interprets technical documents for proper execution of assignments., • Conducts quality assurance measures and inspections., • Ensure that all administrative processes, including torque sheets, 5S (Five S), and tool inventory/tracking., • High school diploma or equivalent (GED), • Associate degree/trade school certification in a related field, • Certificate of completion in an apprenticeship program, or journeyman experience, • Knowledgeable in pertinent electrical codes and regulations, • Industrial electrical experience strongly preferred; commercial electrical experience accepted – residential electrical experience does not apply to setting, • Ability to bend conduit and installation of large cables, • Lift up to 50lbs and ability to work on ladders., • Must be able to stand, walk, kneel, bend, and sit for extended periods of time. To read our Candidate Privacy Information Statement, click here: Company DescriptionGojob is the #1 Workforce-As-A-Service platform that leverages Tech and Data to make the labor market more fluid & accessible, and empower workers with dignity.Gojob is the #1 Workforce-As-A-Service platform that leverages Tech and Data to make the labor market more fluid & accessible, and empower workers with dignity.

Job DescriptionDescription: Join Our Team at Steward + Helm – Where Community Meets Opportunity! Company Overview: At Steward + Helm, we are part of a larger movement dedicated to enhancing lives by creating exceptional living environments. We believe that every great home contributes to a great life, which is why we focus on transforming apartment communities with significant investments, turning them into comfortable, high-quality residences that enrich both the lives of their residents and the surrounding neighborhoods. We believe stewardship is a fundamental attitude that should permeate every role, characterized by trust, intentionality, and diligence. Our team represents our brand, caring for residents, building vibrant communities, and ensuring our properties thrive. In return, our leaders act as stewards, empowering, supporting, and guiding our staff. As an owner-operated company, our core expectation is straightforward yet impactful: Embrace stewardship. Why Join Us? · Skill-Building & Development – We empower our employees, whether you’re growing your trade expertise or looking for opportunities to move up. · Hands-On, Impactful Work – Your day-to-day efforts directly improve the quality of life for our residents and the performance of our properties. · Supportive Team Environment – You’ll work alongside experienced professionals who value collaboration, communication, and having each other’s backs. · Competitive Compensation & Benefits – Your skills and reliability matter, and we make sure you’re recognized and rewarded for them. Job Overview: The Maintenance Technician plays a vital role in maintaining and repairing the physical elements of the property to meet the company’s established standards and legal requirements. The position involves diagnosing and addressing issues in areas such as HVAC, electrical, plumbing, carpentry, dry wall, exterior structures, and household appliances. The Service Technician also supports the Resident Service Director by assisting with preventative maintenance and ensuring the timely completion of apartment make-readies, while delivering high-quality customer service. Key Responsibilities: Maintenance Operations: • Perform repairs and maintenance on HVAC systems, electrical wiring, plumbing fixtures, appliances, drywall, carpentry, flooring, exterior structures, and other essential property components., • Monitor, prioritize, and complete service requests while ensuring high levels of customer satisfaction., • Assist in apartment make-readies, ensuring all units meet company standards for move-ins., • Work alongside the Resident Service Director to implement preventative maintenance programs and ensure compliance with safety protocols., • Repair and replace apartment materials or address maintenance requests, including HVAC, electrical, plumbing, carpentry, drywall, interior and exterior structures, appliances, and apartment make-readies., • Paint interior and exterior structures, repair sheetrock, and woodwork with carpenter's tools., • Respond promptly to all on-call pages/requests., • Maintain and organize tools, equipment, and maintenance supplies in accordance with company policies., • Assist in inventory tracking and recommend improvements to enhance repair efficiency., • Ensure all maintenance activities are completed following safety standards and company guidelines., • Complete necessary documentation, logs, and checklists related to maintenance tasks and inventory tracking. Physical Demands and Work Environment: • Physical Demands: While performing duties, the employee is required to stand, walk, sit, use tools or controls, reach with hands and arms, and communicate effectively. Occasionally, the employee must lift/move up to 25 pounds. Vision requirements include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • High School Diploma or GED required., • Minimum of 2 years of experience in residential or commercial maintenance or related fields., • HVAC or EPA Certification required., • Valid Driver’s License., • Professional appearance and demeanor., • Ability to multitask and adapt to a fast-paced environment., • Expertise in maintenance areas, including pools, landscaping, plumbing, electrical, and HVAC., • Strong customer service orientation and communication skills., • Commitment to promoting safety and adhering to established safety protocols., • Attention to detail and quality, ensuring work meets procedural and company standards. At Steward + Helm, we believe in supporting our team members with a comprehensive benefits package that promotes health, well-being, and work-life balance. Here’s what you can expect: • Medical, Dental, and Vision Insurance: Comprehensive coverage to keep you and your family healthy., • 401(k) Plan: Competitive company match to help you plan for your future., • Paid Time Off (PTO): Enjoy 22 days of PTO annually to recharge and take care of personal matters., • Paid Holidays: 15 paid holidays throughout the year to celebrate and relax.

Job Description This job is offered at Arlington Independent School District in Arlington, TX. PRIMARY PURPOSE: • High school diploma or equivalent from an accredited institution, • Must have valid Texas Journeyman Plumber license, • Must have valid Texas driver's license, • A satisfactory driving record, • Four years experience in the plumbing trade area with working knowledge of commercial plumbing equipment, • Perform scheduled maintenance service on plumbing systems and fixtures, • Apply all codes to installations, repair, and maintenance, • Ensure all requirements as specified by the manufacturer of systems and fixtures are met, • Ensure all installations, repairs and maintenance are properly sized, aligned supported graded, • Ensure all installations, repairs and maintenance meet the requirements of the appropriate codes, • Ensure all installations, repairs and maintenance meet environment protection requirements, • The Plumber may spend long hours outside and in awkward position which can cause physical discomfort and strain., • The Plumber will be lifting and adjusting heavy objects, and will come in contact with sharp, hot and/or very cold supplies and equipment., • The Plumber must maintain safety procedure at all times to avoid injury., • Plumbers may also come in contact with potential poisons and gases that could cause injury or illness.

Job Description Unleash your potential with the Johnson Controls team! As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Join the Johnson Controls family and thrive in a culture that values your voice and ideas. Your next incredible opportunity is just a few clicks away! Here's what we have to offer: * Competitive Pay * Paid vacation, holidays, and sick time. * Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one. * Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources. * Encouraging and collaborative team environment. * Dedication to safety through our Zero Harm policy. * JCI Employee discount programs (The Loop by Perk Spot). * Check us out: A Day in the Life of the Building of the Future - What you will do: Perform service and new installation commissioning activities on fire alarm, access control, CCTV, intrusion alarm and intercom systems. How you will do it: * Supervise and inspect the installation of equipment to meet customer expectations and manufacturer specifications. Field coordination and communication, system programming, commissioning, AHJ testing and training on new system installations * Evaluate and diagnose equipment that requires servicing as well as troubleshooting potential field wiring problems * Provide specific solutions and recommendations to customers on the most efficient and cost effective method in restoring a specific system back to normal condition * Manage assigned Electronic Systems service calls in regards to field labor hours estimated * Customer satisfaction through coordination, response to customer requests and problems and clear communication skills * Prepare reports on daily activities * May be required to work overtime * Read and understand complicated blueprints, diagrams, schematics, submittals, software/system programs, and operation/product manuals * Required to lift and or carry equipment and tools, which may be over forty (40) pounds Working environment may involve climbing ladders and scaffoldings with equipment, upwards to forty (40) feet Capable of working in cramped workspaces such as ducts, crawl spaces, above ceilings, etc. * Must adhere to all OSHA and JCI safety policies and procedures * Complete mileage and monthly vehicle report in a timely manner What we look for: * 2-5 years’ experience with installation and service of fire alarm, access control, CCTV, intrusion and intercom systems * Demonstrate working knowledge of electricity and electronics In addition, demonstrate an aptitude for troubleshooting systems and performing necessary repairs * Security experience with P2000 or C-Cure 9000 required. * Fire alarm Experience preferable with Edwards and Notifier * Ability to effectively work independently * Demonstrate a high level of customer service * Be able to carry and move equipment/tools weighing up to 40 pounds * Minimum high school/trade school graduate, military, or two-year Associate degree in a technical field involving electronics or computers * Working knowledge of personal computers (Windows 2000, XP, Windows 7) and Microsoft's suite of Office software * Working knowledge of IT network systems * Ability to use hand and power tools and test equipment such as multi-meters, oscilloscopes, digital analyzers, battery analyzers, frequency meters, decibel meters and communication devices as required * Excellent verbal and written communication skills * Ability to read and understand complex building architectural, mechanical and electrical documents, as well as project plans, specifications, schedules and equipment installation/operation/troubleshooting manual. HIRING HOURLY RANGE: $19.23-$24.51 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide. #techhiring

Job Description Pacesetter Personnel Services is currently seeking HVAC commercial service technicians for the Dallas- Forth Worth areas. Job Summary: Performs inspections, testing, repairs, servicing, and planned maintenance of HVAC Systems. Essential Duties: • Diagnoses HVAC system performance through observation, testing and setup as required by trade/position and type/size of equipment to include split systems up to 25 tons, mini split systems, RTUS up to 25 tons, WSHP up to 25 tons, self contained systems, CRAC units, airside, AHUs and EFs. Proficiently operates hand tools, power tools, gauges and measuring equipment., • Performs disassembly and reassembly of large or small commercial HVAC equipment to perform troubleshooting and planned maintenance as indicated in the service agreement., • Completes service contracts, quoted projects and demand service calls with high quality while maintaining profitability. Develops long-term relationships with customers and explains work performed to the customer's satisfaction., • Participates in technician on-call-stand-by rotation as dictated by business unit policies and procedures., • Safely operates motor vehicles and trailers as evidenced by past driving performance record. Meets requirements of fleet safety and driving policy and adheres to all company safety requirements., • Purchases materials and issues purchase order numbers to suppliers., • Maintains equipment, tools, and inventory stock on service vehicle., • High School Diploma or GED., • 2- 5 years experience., • Must possess required registrations, and Type II or Universal EPA certification as required by the position., • Two year technical degree in related field is preferred.

Job Description This job is offered at Arlington Independent School District in Arlington, TX. ROLE AND PURPOSE: To serve as HVAC Technician QUALIFICATIONS: Minimum Qualifications: • Valid Texas drivers license and satisfactory driving record, • High school diploma required, • Four years of experience with commercial building HVAC systems or technical certification from approved trade school or college., • Knowledge of facility mechanical and electrical systems, • Strong organizational, communication, and interpersonal skills INSTRUCTIONAL MANAGEMENT • Models behavior that promotes a positive organizational climate, • Provides assistance in implementation of maintenance department goals and initiatives, • Assists in advancing the mission, vision, goals, and strategic plan for the district, • Performs programming and on-site repairs to improve the learning environment, • Actively supports the efforts of others to achieve the district's goals and implement the strategic plan, • Maintains an effective system of communication among department staff and individual school staff, • Provides support to HVAC Foreman and Supervisor to address departmental functions, • Provide support to campuses to address facility maintenance, • Troubleshoots mechanical and automation problems, • Assists in repairs to make HVAC more effective, • Maintains a working knowledge of district policies, procedures, and practices, • Helps facilitate communication and coordination with campuses, • Seeks, accepts, and responds to evaluative feedback from subordinates, peers, and supervisors, • Assumes personal responsibility for enhancing competencies through staff development, • Exhibits good judgment and logical thinking, • Continually improves and updates knowledge of the District's facilities and maintenance initiatives PHYSICAL DEMANDS: • Frequent walking, standing, crouching, stooping, lifting, pushing, pulling, bending, reaching overhead and horizontally, • Occasionally move objects up to 75 pounds; ascend/descend ladders, scaffolding ramps, poles, • Use of tools/equipment requiring a high degree of dexterity, • Regularly operate a light truck or van EQUIPMENT USED: • Power tools, • Hand and pneumatic tools, • Drills, • Saws, • Shears, • Snips, • Refrigerant pressure gauges, • Multi-meters, • Testers, • Leak detectors, • Man lifts, • Scaffolds and ladders, • Two-way communication devices.

Job Description HVAC Service Manager Job Responsibilities: The HVAC (heating, ventilation, and air conditioning) Service Manager leads staff members who install, repair, and maintain heating and air conditioning systems in both residential and commercial buildings. This manager routinely works directly with service and install technicians, dispatch personnel and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting himself as a senior company representative, the HVAC Service Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements. Job Duties: The HVAC Service Manager directs daily operations of the HVAC Service Department by successfully performing the following tasks, duties and responsibilities: * Schedules, directs, and provides technical support for HVAC technicians to meet service demands and customers’ expectations * Recruits, interviews, hires, and trains HVAC technicians as required to meet workload demands, and company or customer expectations and requirements * Supervises and directs the HVAC technicians to effectively perform the functions of equipment repair, installation, start-up, operation, and other duties as required to ensure customer satisfaction * Reviews technicians’ work to ensure quality meets established standards, techniques and safety requirements; makes recommendations as requirements to improve quality and productivity * Responsible for HVAC technicians’ performance appraisals, reviews and for setting improvement goals per company requirements * Establishes and maintains a regular training program to ensure that HVAC technicians are properly trained on latest service techniques and safety procedures for equipment and general working conditions * Conducts group and one-on-one meetings with technicians as required for training, evaluation and general communication; participates and/or conducts regularly scheduled departmental safety/informational meetings * Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency and training requirements * Communicates daily with dispatch reporting on project information, estimated time to complete jobs, labor hours and parts or material used * Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational problems with products, premature failures and other issues as they apply to products and equipment sold and serviced by the HVAC Service Department * Develops and monitors budgets, goals and objectives to insure departmental profitability * Reviews work orders, invoices and time reports for accuracy, and to ensure timely cash flow and maintain minimal account receivables * Specifies and makes sure that required parts are ordered in timely fashion to ensure work deadlines are met * Ensures that all company/department policies are being followed by all HVAC technicians * Oversees assigned HVAC service vehicles, monitors vehicles to ensure they are being maintained and operated as required and used according to company policy * Monitors HVAC service vehicles to ensure they are in an acceptable condition to allow technicians to efficiently work out of the vehicle, and that an adequate inventory of parts and material are maintained * Keeps current with latest factory OEM training on current products, coordinates HVAC technician training and maintains training records to ensure personnel maintain proficiency in preventive maintenance, start-up, trouble-shooting, and repair of supported equipment * Generate sales leads; and promotes and develops maintenance/service agreements; estimates and generates bids for contract projects/work * Manages larger installation, start-up and commissioning projects; coordinates and directs a team of technicians and/or installing contractors; performs prestart-up inspections and completes turnover of equipment to owner * Work with other departmental managers to meet company and departmental goals and objectives * Other tasks and responsibilities as required to maintain efficient department operations Minimum Job Requirements: The HVAC Service Manager should possess the following skills, characteristics and abilities: * Excellent customer service and sales skills * Five years HVAC Management related experience; or an equivalent combination of education and experience * Some post-high school education from college, trade school or military * Exhibit an in-depth knowledge and understanding of HVAC and refrigeration systems * Has the ability to read, interpret, utilize, and train on manuals, schematics and control circuits related to HVAC and refrigeration systems * Technical aptitude with knowledge of local codes and an ability to use resources at hand to find solutions * Excellent leadership skills to enhance team productivity and standards of work produced * Excellent verbal and written communication skills; and strong conflict management skills * Detail oriented and highly organized with the ability to handle multiple tasks and assignments * Good computer skills: knowledge of and proficiency in common office applications such as MS Word, Excel, Outlook and general software navigation * Possess a strong personal desire for improvement; and the desire to motivate HVAC technicians to be better tomorrow than they are today * Have a clean, neat and professional appearance; a top performer who can instill pride of workmanship in himself and in others * Valid driver’s license with a clean driving record and background * Ability and willingness to work non-standard schedule: nights, weekends and holidays as/if required Join our team as an HVAC Supervisor where you can make a significant impact by leading skilled professionals while ensuring top-notch service delivery. Job Type: Full-time Benefits: * 401(k) * 6% Match on 401(k) * Company truck * Dental insurance * Fuel card * Health insurance * Life insurance * Paid time off * Professional development assistance * Vision insurance Schedule: * Monday to Friday * Year round work Supplemental Pay: * Bonus opportunities * Performance bonus Company DescriptionWe specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar’s mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.

Job Description HVAC Technician – Residential & Commercial Company: Bell Mechanical Services About the Job: Bell Mechanical Services is seeking a skilled HVAC Technician to perform inspections, maintenance, repairs, and installations for both residential and commercial customers. We’re looking for someone who takes pride in their work, communicates well with customers, and can troubleshoot a wide variety of HVAC systems. Responsibilities: • Install, maintain, and repair heating, ventilation, and cooling systems, • Diagnose and fix electronic and mechanical components, • Ensure equipment is clean, efficient, and operating safely, • Travel to job sites within the service area and maintain communication with dispatch, • Rotate on-call shifts for nights/weekends as scheduled, • Maintain company vehicle, tools, and safety equipment, • Deliver excellent customer service and generate invoices when needed, • Experience in the phone application XOi preferred, • Passing background check and drug screen, • Clean driving record is a MUST (We provide truck/van), • High school diploma or GED required; trade school preferred, • 3+ years of HVAC installation, maintenance, and troubleshooting experience preferred, • EPA certification (or willingness to obtain) required; NATE certification a plus, • Valid driver’s license with clean driving record, • Competitive pay, • Company vehicle provided for job use, • Ongoing training and career development, • Opportunities to work on both residential and commercial projects, • 401(k) - company match, • Cover all employees with short term disability

Job Description Trinity Knights Consulting is an exciting, fast-growing company that specializes in working with Fortune 100 and 500 companies. We pride ourselves on our fun, family-oriented culture, and we are dedicated to fostering a diverse and inclusive workplace. We believe in providing our employees with opportunities for growth and development, and we reward hard work and success with executive-level positions. We are currently seeking a motivated and enthusiastic Entry Level Sales Representative to join our expanding team. If you have a passion for sales, a desire to grow professionally, and a commitment to contributing to a positive work environment, we want to hear from you! Responsibilities: • Generate leads and establish new business relationships, • Conduct sales presentations and product demonstrations, • Meet and exceed sales targets and performance goals, • Provide exceptional customer service and maintain client relationships, • Attend company-sponsored events and trade shows, • Competitive base pay with uncapped commission potential, • Opportunity to grow within the company and earn executive-level positions, • Fun and family-oriented work environment, • Paid travel for business trips, conferences, and company events, • Work with prestigious Fortune 100 and 500 clients, • Holidays off to enjoy time with family and friends, • Choose your own schedule for optimal work-life balance, • Excellent communication and interpersonal skills, • Self-motivated, goal-oriented, and driven to succeed, • Strong organizational and time management abilities, • Team player with a positive attitude, • Willingness to learn and adapt to new sales techniques Click to apply above or; Please submit your resume and cover letter to . In your cover letter, explain why you think you would be a great fit for our team and what excites you about this opportunity. We look forward to reviewing your application and discussing your potential for growth with Trinity Knights Consulting! Trinity Knights Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Company DescriptionAt Trinity Knights Consulting, our mission is to empower future entrepreneurs with the essential tools for financial growth and literacy. We are dedicated to nurturing their focus, drive, and understanding of time management and financial acumen while upholding professionalism as our hallmark. Our vision is to foster a new generation of firm owners, shaping the future of business and innovation.At Trinity Knights Consulting, our mission is to empower future entrepreneurs with the essential tools for financial growth and literacy. We are dedicated to nurturing their focus, drive, and understanding of time management and financial acumen while upholding professionalism as our hallmark. Our vision is to foster a new generation of firm owners, shaping the future of business and innovation.

Job DescriptionBenefits: • Dental insurance, • Health insurance Summary The Maintenance Technician will be able to provide technical solutions to automation-related tasks including troubleshooting, determining root case, implementation of fix and documentation of solutions. Responsible for designing SOPs, installing, maintaining and troubleshooting automation equipment including logic controllers and HMI devices used in production equipment. Must have a broad range of knowledge and understanding of process machinery, electrical controls, as well as mechanical, pneumatic and hydraulic systems essential to plant and production related equipment. Assists in the procurement of parts and planning of repairs Leads complex projects, preventive maintenance activities and repairs across the facility Able to operate CMMS systems and demonstrate 100% functionality in order to complete work orders as well as log corrective maintenance issues in the system Effectively communicate with internal and/or external Technical Support, production personnel and other techs to identify problematic areas of concern, advance circuits and grounding, interpret diagrams, and test equipment Perform electrical repairs and troubleshoot for the following: PLC controls, AC&DC motor controls, solid state motor controls, advance circuits and grounds, interpret diagrams, and test equipment Read schematics, drawings and manuals to establish facts and draw valid conclusions Must demonstrate an understanding of the companys objectives including productivity, yields, food safety, quality, customer service and cost goals; daily work activities should support achieving those goals Oversee or perform daily inspections, emergency repairs, routine adjustments and follow periodic preventive maintenance schedule Maintain organized documentation and inspection records; be prepared for a facility audit of such records and related processes Model professional workplace conduct and adherence to company policies such as the GMP compliance, attendance, punctuality, efficient and productive work habits and good personal hygiene Provide support to Process Improvement (PI) projects and participate on safety teams Must possess proficient mechanical, electrical, hydraulic and pneumatic troubleshooting skills (logic and control circuits) and emergency repair skills; ability to identify and repair problematic issues concerning all equipment and machinery, including finding innovative solutions to recurrent problems Ability to use multimeter and other measurable instruments Knowledge of National Electrical Code Ability to work with single and three phase voltage Must be capable of reading/mechanical blueprints Capable of troubleshooting and making the repairs on AB PLCs (programmable logic controllers) Ability to understand schematics, drawings, and manuals to establish facts and draw conclusions Ability to demonstrate math skills as part of the daily activities such as fractions, decimals, percentages and the metric system; efficient with ratios, metric system and formulas Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments. Must follow all Company Safety policies, as well as all GMP and FSQA regulations and all lock-out/tag-out requirements according to OSHA requirements. Food Processing Industry experience, but not a must NECESSARY 3 years Industrial Controls experience High School Diploma or GED equivalency Experience in a manufacturing environment required Certificate in trade school or equivalent work experience related to a specific trade or general facilities and/or maintenance background Must be able to take direction as well as ownership of given tasks Working knowledge of Microsoft Office, Gmail, Basic Excel ABILITIES Ability to prioritize and manage multi-functional tasks Ability to work effectively under pressure, and against strict time constraints Ability to use standard powered and non-powered tools Ability to accurately assess mechanical and electrical problems, make recommendations, communicate effectively and resolve issues quickly Must be able to walk, bend, stand and reach for extended periods of time Must be able to lift 49 lbs.

Job DescriptionCompany Description MAKE GREAT PIZZA — AND MORE — POSSIBLE Be a part of the world's #1 Pizza company and watch your career grow! Job Description Domino's Supply Chain Center is seeking a Industrial Maintenance Technician to join our team. This critical position demands advanced technical skills in designing, evaluating, troubleshooting, repairing, and installing production equipment. Proficiency in Electrical, Mechanical, Plumbing, Hydraulics, Pneumatics, and Computer Controls is essential. The Maintenance Technician will be entrusted with the vital responsibility of maintaining our distribution and manufacturing facility, including executing preventive maintenance, conducting thorough troubleshooting, performing precise repairs, and overseeing the installation of machinery related to food processing equipment, physical structures, and mechanical and electrical systems. Furthermore, the Maintenance Technician must demonstrate a comprehensive understanding of safety protocols and their stringent application when working with mechanical and electrical equipment in a high-stakes production environment. Mid Shift: Tuesday - Friday: 12pm - 7:30pm; Saturday: 8am - 8:30pm Hourly pay: $36/hr. Core Responsibilities and Duties (40%) Equipment Inspection, Troubleshooting, and Maintenance • Conduct rigorous monitoring of equipment to detect and prevent malfunctions, • Industrial equipment electric control voltage trouble shooting, • Engage in critical discussions with supervisors and team members to accurately diagnose complex issues and implement effective machine repairs, • Execute precise installation, repair, or replacement of electrical devices, including transformers, relays, circuit breakers, starters, and safety and limit switches, • Perform meticulous layout, assembly, installation, and maintenance of pipe systems and related hydraulic and pneumatic equipment, • Implement, program, and troubleshoot sophisticated automated machinery and Programmable Logic Controllers, • Oversee the installation, troubleshooting, and repair of critical refrigeration and Heating Ventilation Air Conditioning (HVAC) equipment, • Ensure optimal performance of material handling equipment through regular service and repairs, • Maintain vigilant monitoring of the main electrical panel and conduct immediate troubleshooting as necessary, • Diligently perform all necessary maintenance tasks and meticulously update logs, • Execute precise repairs and maintain the physical structure of the establishment, • Proactively identify potential safety issues with machines; thoroughly document concerns; develop comprehensive action plans for resolution; rigorously follow up to ensure complete problem resolution, • Provide crucial assistance in the control and scheduling of projects, • Maintain vigilant monitoring of inventory levels and initiate timely orders for essential parts, • Conduct comprehensive monitoring of energy usage and provide strategic recommendations for improved efficiency Qualifications Certificates, Licenses, Regulations (Preferred) To perform this job successfully, an individual must be proactive and self-motivated, have the ability to evaluate and repair all types of mechanical and electrical equipment, and is able to perform under extreme stress when there is equipment failure. Core Competencies should include: • Refrigeration, • Electrical Systems, • Controls, • Mechanical Systems, • Basic Maintenance skills, • HS Diploma, and/or Technical School Training two years, and/or 3 to 4 years related experience, and/or licensed journeyman of a skilled trade., • Basic level computer skills for word processing and spreadsheets, • Able to read and interpret blueprints, mechanical and electrical schematic diagrams, • Able to effectively present information to peers, upper management, and team members in oral and written form, • Define problems and draw conclusions, • Interpret technical instructions and diagrams Additional Information The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function. While performing the duties of this job, the team member is frequently exposed to moving mechanical parts. The team member is occasionally exposed to wet and/or humid conditions, outside weather conditions, extreme cold, extreme heat, and risk of electrical shock, explosion, and vibration. The noise level in the work environment is usually moderate but can be high. The team member must have a strong safety awareness to ensure a safe and healthy workplace. Domino's offers: * Paid Holidays and Vacation * Positive work environment * Benefits on first day of employment! * 401k matching contributions * 15% off the purchase price of stock * Company bonus * Referral bonuses * Career growth! All your information will be kept confidential according to EEO guidelines.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off Key Responsibilities: Unit Turnovers • Complete repairs and improvements to prepare vacant units for move-in., • Address plumbing, electrical, HVAC, flooring, painting, and cosmetic needs., • Ensure all work meets property standards and deadlines.Painting & Finishing, • Apply paint and touch-ups to walls, ceilings, and trim with attention to detail., • Match colors and finishes consistently across all unit surfaces.Cleaning & Sanitization, • Deep-clean kitchens, bathrooms, windows, and all living areas., • Remove dust, dirt, and debris to present units in pristine condition.Appliance & Fixture Prep, • Test and inspect appliances for proper function; perform basic repairs or replacements., • Install or replace fixtures, hardware, blinds, and accessories as needed.Time Management, • Organize workload and prioritize tasks to meet turnover schedules., • Coordinate with property staff to align make-ready timelines with leasing needs.Safety & Documentation, • Use personal protective equipment and adhere to safety procedures., • Maintain accurate records of materials used, hours worked, and tasks completed. Key Qualities: • Previous experience in make-ready, general maintenance, or construction., • Hands-on skills in plumbing, electrical, flooring, painting, and general repairs., • Strong time management and organizational skills to meet tight deadlines., • Clear and professional communication with team members and supervisors., • Ability to work independently and adapt to fast-paced environments., • Valid drivers license and reliable transportation required. Education & Experience: • High school diploma or equivalent required., • Trade or vocational training in maintenance or building systems is a plus. Physical Requirements: • Frequent walking, standing, bending, stooping, and climbing stairs or ladders., • Regular lifting of tools and materials up to 25 lbs; occasional lifting up to 75 lbs (with assistance)., • Vision and hearing abilities required to identify issues, communicate, and follow safety guidelines., • Manual dexterity to operate tools, handle materials, and complete maintenance tasks. Schedule & Travel: • May include weekday, evening, and weekend shifts based on business needs., • Occasional travel between properties or for supply runs may be required., • Participation in on-call rotation may be requested. Join a team that values your trade skills, supports your growth, and keeps safety and quality top of mind.

Job DescriptionBenefits: • Dental insurance, • Health insurance Location: Lancaster, TX Shifts: Sunday - Thursday 7:00 am -3:30 pm Days!! Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • High school diploma or GED preferred., • 2+ years of experience troubleshooting, repair, and maintenance of processing, packaging, and material handling equipment, ideally in a food manufacturing/production environment, • Certificate in trade school or equivalent work experience related to a specific trade or general facilities and/or maintennace background, • Ability to work cooperatively with a team., • Must be able to physically lift 25-50 lbs.

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Level C Industrial Maintenance Technician Job Type: Full-time Pay: $26.00 - $28.00 per hour Job Purpose The Level C Maintenance Technician is responsible for the maintenance, troubleshooting, and repair of packaging and warehouse equipment at Quality Packaging. This includes horizontal form-fill-seal machines, shrink wrap tunnels, forklifts, stretch wrappers, and registered bundle wrappers, as well as handling general building and electrical maintenance. The role requires hands-on technical expertise, timely response to maintenance issues, and effective communication across various channels (phone, email, and in person). Key Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (e.g., forklifts, pallet jacks, sweepers)., • Diagnose and repair equipment malfunctions involving mechanical, electrical, pneumatic, and hydraulic systems., • Maintain and repair batteries and chargers., • Conduct minor welding, brazing, soldering, and fabrication tasks as required., • Address mechanical damage to warehouse infrastructure, including racking, flooring, and piping., • Interpret equipment manuals, blueprints, and work orders to perform scheduled maintenance and service tasks., • Maintain accurate records of inspections, repairs, and preventive maintenance tasks., • Operate mechanical hand tools and measurement instruments (tape measures, micrometers, etc.)., • Support production efficiency by ensuring minimal downtime through prompt maintenance actions. Technical Requirements • Strong mechanical aptitude and electrical troubleshooting skills., • Ability to work with high-voltage systems, including 480V 3-phase motors., • Multi-disciplinary repair experience (mechanical, electrical, pneumatic, hydraulic)., • Familiarity with Variable Frequency Drives (VFDs), Servo motors and drives, encoders, and equipment timing., • Basic understanding of PLC systems, sensors (photo eyes, proximity sensors), and logic software., • Customer Service Orientation: Ability to communicate effectively with team members at all levels., • Flexibility: Ability to shift priorities and remain calm under pressure in a fast-paced environment., • Self-Motivation: Capable of working independently and taking initiative in troubleshooting and maintenance tasks., • High School Diploma or GED required; technical certifications or trade school training preferred., • Minimum of 5 years’ relevant hands-on maintenance experience in a production or packaging environment., • Some college coursework is desirable. Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Job Description Title: Service Engineer Apprentice Reports to: Service Manager, (Assigned Technical Center) Location: DMG MORI USA, Technical Center Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 75% Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Essential Job Functions: Service Apprentice will participate in training and development where the incumbent learns to repair, install and move all DMG MORI machines. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Complete all Classroom, factory training and online classes, and pass with 80% or higher scores., • Shadow Service Engineers on service calls, which require traveling with the Service Engineer to customer sites, • Learning through observation, while assisting Service Engineers on the call., • Progression in the apprentice program is competency based, participants are generally enrolled for 2 to 3 years before they receive certification and promotion to Service Engineer., • High School diploma or GED., • Demonstrated mechanical, pneumatic, hydraulic, electrical, or electronic, aptitude., • Experience in CNC manufacturing, maintenance, a related field, a journeyman certificate and/or extensive experience (5+Years) in machine/manufacturing maintenance or related field - such as military maintenance training and experience preferred., • Analytical/problem solving abilities to define, troubleshoot, and repair a machine without assistance, • High interpersonal and social skills required to successfully complete assignments in stressful situations, • Ability to communicate professionally and create positive relationships with customers, • Verbal skills to effectively communicate varying levels of internal technical staff and customers, • Time management skills to plan work and travel schedules to minimize downtime/nonproductive time, • Adaptability to abrupt changes in work schedule and travel arrangements, • Proven written skills and discipline to complete required Technical documents and Reports in a timely fashion., • Ability to travel domestic and/or internationally to visit customer locations and/or trade shows, • Ability to follow complex written and verbal instructions correctly., • Other duties as assigned. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job DescriptionSensaria+ Circle Graphics is the world’s foremost producer of grand and large-format digital graphics. We are an industry leader in creating innovative products for outdoor advertising, business signage, wall decor, art reproduction, and the professional photography and art communities. Our combined 407,000 square feet of manufacturing facilities across the United States house over 88 grand and large format digital printers, custom automated finishing equipment, and coating capabilities to produce printed recyclable materials up to 16 ft wide. Our prepress department processes more than 20,000 files per day with the aid of proprietary software automation tools. We operate around-the-clock, 7 days a week to deliver extraordinary customer service, and print over 431 million square feet of material annually. We specialize in industry leading innovations accompanied by world class service. Job Description Overview: Maintenance Technician I. Position Mission The primary responsibility of the Maintenance Technician is to maintain production machinery and equipment. This entails hands-on troubleshooting and repair procedures. The Tech provides reactionary and emergency maintenance on shift which includes week-end and after-hours call-outs. The Technician performs routine maintenance under CG’s Preventative Maintenance Programs as well as all work orders in the Emaint system. The Maintenance Technician helps control spare parts inventories and requisitions repair parts. The Maintenance Technician must develop a strong working knowledge of all production equipment; its operation and expertise in troubleshooting, set-up, and safety. The Technician participates in facilities maintenance and housekeeping. The Maintenance Technician must become certified in Lock Out/Tag Out and as an operator of forklifts, manlifts and tuggers. II. Working Environment and Physical Demands The Maintenance Technician works throughout the plant and grounds in the performance of their duties. The plant is climate controlled but the Maintenance Technician may be required to work in areas during periods of extreme temperatures where the work area will become uncomfortably hot or cold. This position works five 8 hour day shifts. The work often requires reaching, bending, kneeling, and working in awkward positions. Requires prolonged standing, bending, stooping, lifting and stretching. Requires eye-hand coordination and manual dexterity sufficient to safely operate and work on or with tools and equipment. Requires a normal range of hearing and vision. Requires the ability to safely lift and load material of up to 50 lbs. Ability to work in a variety of environmental conditions. Ability to work on ladders and scissor lifts. III. Tasks description – Essential Duties and Responsibilities: Reactionary and Emergency Maintenance: 60% of position responsibility • Troubleshooting and repair of production equipment, • Sense of urgency in responding to maintenance requests, • Maintain spare equipment in a ‘plug and play’ condition, • Expedite and requisition repair parts, • Log issues of controlled inventory spares, • Control and requisition maintenance supplies, • Conducting periodic inspection and preventative maintenance of all plant machinery and equipment, • Control and requisition janitorial supplies, • Maintain floor machine, • Work with Landlord in addressing any maintenance issues involving Celtic Media or shared space, • Assist in physical inventories and control of maintenance supplies and spare parts, • Participate in EH&S audits and remedies, • Manage outside contractors working in Circle lease space, • Certified Forklift, Tugger and Manlift Operator, • Certified LOTO, • Knowledgeable of proper Hazardous Waste handling and storage, • Familiarity with GHST (formerly MSDS) and request data sheets as required, • Knowledgeable of Sensaria EH&S policies, procedures and SOPs, • High School Diploma and technical experience, • Completion of Secondary Technical Training (Trade Apprenticeship, Military, Vocational), • Associate Degree in Industrial or Mechanical Technology, • KNOWLEDGE, SKILLS, AND ABILITY:, • INTELLECTUAL DEMANDS:, • Ability to troubleshoot and repair mechanical, hydraulic, and pneumatic systems, • Basic knowledge of electrical and electronic circuitry, • Ability to read and work off of Blueprints, schematics, wiring diagrams, IPBs, etc., • Troubleshoot and program PLCs, • Ability to follow detailed instructions and procedures, • Troubleshoot operating software and hardware, • Good Organizational Skills, • PC proficient, • Attention to detail, • Ability to communicate effectively, • Safely work with hand, power, and specialized tools, • Comfortably work off of ladders EEO Statement: Sensaria, Formerly Circle Graphics Decor, and it's subsidiaries and acquired companies, (The Company) is an equal employment opportunity employer. The Company’s policy is to not unlawfully discriminate against any applicant or employee on the basis of race, color, sex, religion, national origin, age, disability, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any protected category, characteristic or status. It is also the Company’s policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. The Company complies with the ADA, the ADAAA and applicable state law and considers reasonable accommodation measures that may be necessary for qualified applicants/employees to perform the essential functions of the job. Hire may be contingent upon a post-offer medical examination, and skill and agility tests, as appropriate for the position. Assistance For the Disabled Alternative formats of this Privacy Policy are available to individuals with a disability. Please contact for assistance. Please review our Applicant Privacy Notice for information about how we handle applicants’ personal information. Sensaria Applicant Privacy Notice Powered by JazzHR QVB6Npcc6n

DSV - Global transport and logistics In 1976, ten independent haulers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at Location: Lancaster, TX Summary We are seeking an experienced and highly motivated lawyer to join DSV Group Legal to take on challenges in a fast-paced environment. This position reports to the Head of Legal, North America and has primary responsibility for providing comprehensive legal guidance to various business units and senior management on a wide range of matters, including complex legal and regulatory issues, negotiating complex contracts, and serving as the first point of contact for all material legal queries and matters pertaining to DSV’s Air & Sea and Contract Logistics divisions in the U.S. and Canada. Duties and Responsibilities • Draft, review, and negotiate legal documents, including customer and vendor agreements related to air and ocean transportation services, NVOCC services, warehousing services, 3PL and 4PL services, ocean service contracts, truck brokerage and road transportation; real estate related documents including lease agreements; equipment financing agreements., • Actively manage all aspects of litigation and pre-litigation matters in an efficient, practical and cost-effective manner., • Advise executive and senior management in business matters to ensure operations are conducted in a legally compliant manner, identify risks and compliance issues and advise on necessary risk mitigation measures., • Support corporate compliance with internal policies, provide training to internal stakeholders., • Assist with corporate governance matters, including the preparation and maintenance of business entity documents, company formation, preparing resolutions and consents, and managing annual shareholder meetings., • Provide support for human resources on a range of labor and employment matters, including policy implementation and training., • Interface and partner with various Group functions and key stakeholders in the U.S. and globally., • Advise stakeholders on legal trends, developing areas of the law, industry trends and related risks that may impact the Company’s operations and/or services., • Other duties and responsibilities as assigned. Educational Background / Work Experience • Juris Doctor degree from an accredited law school, • Licensed to practice law and a member in good standing in the state/jurisdiction in which the position is based or otherwise in compliance with the in-house counsel registration rules of that state/jurisdiction., • At least five years of legal experience, ideally with an in-house legal team or law firm experience working with in-house legal teams., • Experience in the maritime, logistics, supply chain and/or transportation industry Required Skills and Qualifications • Experience with drafting, reviewing and negotiating various contracts related to logistics, transportation, procurement and complex commercial transactions, and substantive experience with industry-related regulatory matters., • Experience in building, updating and refining contract templates customized to meet specific needs and requirements of business, while incorporating experience-informed negotiating positions., • Ability to triage a heavy workflow, meet deadlines, prioritize workload, adapt to changing conditions, set appropriate priorities with clients and deliver results efficiently., • Highly effective communications style, translating complex legal issues into readily understandable assessments and actionable recommendations that deliver business value in the context of global business strategies., • Strong analytical, communication, negotiation, presentation, and strategic decision-making skills., • Ability to work independently with minimal supervision while working collaboratively within a local and global team environment., • Ability to problem solve with creative solutions for complicated problems that require careful analysis and good judgement., • A passion for continuously identifying improvement areas and driving change., • Positive attitude and forward thinking., • Self-starter, results-oriented, driven to meet and exceed goals., • Attention to detail and delivery of high-quality work product., • Excellent interpersonal skills, an inquisitive mind, and the ability to work effectively with multiple, diverse, cross-functional stakeholders. Preferred Experience & Skills • Knowledge of and experience in the following areas: regulatory knowledge relating to the logistics and transportation industry, including FMC regulations and compliance, global trade compliance, including export controls, sanctions, export licensing, product diversion, deemed exports, anti-boycott laws, embargos, product classifications, global trade contract provisions, and customs matters, U.S. Foreign Corrupt Practices Act, U.K. Bribery Act, and other anti-bribery and anti-corruption law, data privacy and data protection laws and compliance (e.g., GDPR, CCPA)., • At least two years of managerial experience within an in-house legal department or at a law firm. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee uses his/her hands to finger, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, or crouch; talk or hear. The employee uses computer and telephone equipment. Specific vision requirements of this job include close vision and distance vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee rarely is exposed to fumes or airborne particles, toxic or caustic chemicals. The noise level in the work environment is usually low to moderate. For this position, the expected base pay is: $148,000- $184,000 / Annual. Actual base compensation will be determined based on various factors including job-related knowledge, skills, experience, and other objective business considerations. DSV provides a comprehensive package of health benefits including: medical, prescription, dental, vision, and life insurance, along with flexible and health spending accounts, short and long-term disability coverage, and wellness resources to support your overall well-being. In addition, our 401(k) plan offers company-matching contributions up to 5% to help you build a secure financial future. To support a healthy work-life balance, DSV also offers generous paid time off, paid holidays, and additional floating holidays. DSV does not accept unsolicited agency resumes. Please do not forward unsolicited resumes to our website, employees, or Human Resources. DSV will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of DSV and will be processed accordingly without fees. DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at . If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time.

Project Manager - Commercial Audio Visual • 21146, • IES Communications, • Austin, Texas Job Description Job Summary: The Project Manager - Audio Visual is the overall manager for assigned project(s). The Project Manager ensures that all contracted work is developed, implemented, installed and managed in accordance with the Company’s requirements, including but not limited to, safety, quality, management and financial performance requirements. All aspects of the assigned project(s) must be carried out as efficiently as possible with respect to staffing, materials management, financial management, customer care and customer delivery goals. Job Duties and Responsibilities: • The Project Manager - Audio Visual will manage the workload distribution and monitor the customer delivery and job installation progress., • The Project Manager - Audio Visual will plan for, manage, monitor and maintain project profitability to achieve Company goals., • The Project Manager - Audio Visual reviews all job cost postings for accuracy and completeness, including but not limited to, the preparation of invoices, customer collections and periodic financial reporting to the customer and management., • The Project Manager - Audio Visual will manage all related quality and safety issues on customer work., • The Project Manager - Audio Visual will participate in and/or facilitate the bid process., • The Project Manager - Audio Visual acts as the Company liaison for interface with customer representative(s)., • The Project Manager - Audio Visual will create, develop and implement account process improvement(s)., • Other responsibilities as assigned. Min USD $80,000.00/Yr. Max USD $115,000.00/Yr. Qualifications Physical and Mental Requirements: • The Project Manager - Audio Visual must be self-motivated, positive in approach, professional and lead others to create, develop and implement project process improvement(s)., • Must promote the Company culture and mission to all employees, vendors, clients and business partners., • Must have proven problem solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s)., • Must have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements., • Must able to travel within branch territory and/or regional territory as needed., • Must have the ability to learn Company and customer project management systems. The Security Systems Foreman must also have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements., • Must be able to secure and maintain a Company sponsored American Express Card., • Must possess at least a High School diploma or GED equivalency; Bachelor’s Degree preferred., • Must have experience in customer interface, such as liaison between the customer and the Company., • Must possess a minimum of five (5) years of supervisory or managerial experience., • Must have a minimum of five (5) years of experience in leading commercial audio vidsual projectsfield., • Must be proficient with Microsoft Office (Word, Excel and MS Project)., • Must meet Company minimum driving standards., • Must be able to manage multiple tasks/projects simultaneously., • Must have demonstrated verifiable ability to define a project, create a project scope of work, develop detailed associated tasks and manage these to final completion and customer turnover. Minimum Years of Experience 6+ License Required No Minimum Education High School Overview IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES’s 2024 fiscal year ending September 30, 2024, IES produced over $2.8+ billion in revenue and employed over 9,485 employees at over 131 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply EEO Statement PLEASE NO AGENCY CALLS. NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid. EEO & Affirmative Action The IES policy on equal employment opportunity prohibits discrimination based on race, color, religion, national origin, sex, age, gender identity, sexual orientation, individuals with disabilities, protected veterans, or any other protected status or characteristic. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment, and also states that retaliation against any employee who files a complaint regarding possible violations of this policy will not be tolerated. IES is also committed to taking affirmative steps to promote the employment of minorities, women, individuals with disabilities, and protected veterans. IES develops affirmative action programs to support its commitment to equal employment opportunity, consistent with company policy and the company’s obligations as a contractor to the United States government. View Your Equal Employment Opportunity rights under the law. "EEO is the Law" poster | "EEO is the Law" poster supplement View IES' policy on Pay Transparency Pay Transparency NonDiscrimination Poster Disability Accommodation IES is an Equal Opportunity/Affirmative Action Employer. IES provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contact the IES corporate office at (713) 860-1500 or any IES office to request assistance. IES Participates in E-Verify E-Verify Information English/Spanish Right to Work English Spanish #LI-Onsite

Job Description Position Overview We’re seeking a hands-on Manufacturing Process Technician to support the daily operation and upkeep of complex production and facility equipment in an industrial setting. This technician will be responsible for installing, maintaining, troubleshooting, and repairing a variety of machinery used in the manufacturing process. This is not a remote position—all work will be performed onsite in a dynamic production environment. Primary Responsibilities • Perform diagnostics and repairs on equipment used in production processes such as extrusion lines, CNC machines, electric and pneumatic presses, and systems incorporating hydraulics, pneumatics, robotics, and PLCs, • Conduct scheduled preventative maintenance and support continuous improvement initiatives to reduce machine downtime, • Occasionally coordinate with external contractors on building systems like chillers, compressors, HVAC units, pumps, and blowers, • Use judgment and hands-on skill to identify faults, disassemble machinery, source or fabricate parts, and test completed repairs, • Maintain a focus on safety in every task and encourage the same of others working nearby Key Skills & Capabilities • Ability to diagnose mechanical systems (gears, belts, bearings, etc.) and electrical circuits using appropriate tools, • Hands-on experience with precision measuring tools (e.g., calipers, micrometers), • Confident using various shop equipment like saws, grinders, hydraulic presses, and band saws, • Able to interpret technical drawings and manuals written in English, • Working knowledge of basic electrical systems and ability to use digital multimeters to identify voltage issues, faulty components, fuses, etc., • Strong problem-solving skills with a collaborative and team-focused attitude, • Competency in using Microsoft Office tools (Word, Excel, Outlook), • Comfortable working with Lean Manufacturing concepts and participating in improvement projects, • Familiar with industry quality and safety standards (e.g., ISO or AS/QMS frameworks) Physical Requirements • Frequently required to lift up to 50 lbs, stand for long durations, climb ladders, squat, bend, and work in confined areas, • Must have the ability to use sight, hearing, touch, and smell to identify issues with equipment, • Work is regularly conducted in environments that may be noisy, hot, humid, or cold Preferred Experience & Education • High School diploma or equivalent required, • 2-year technical or trade school certification preferred, • 2–5 years of relevant experience in equipment maintenance or industrial manufacturing, • Experience with PLC programming, AC/DC drives, or motor controls is considered an advantage, • Basic math skills and proficiency in English (reading, writing, speaking) required, • Must pass a background check and drug screening, • Valid state-issued driver’s license required (Texas license preferred if working in-state) Additional Notes • Will be expected to attend all required team training and safety meetings, • Must support production engineering efforts in yield improvement and process optimization, • May assist in revising SOPs and work instructions as part of ongoing process development, • Must maintain a clean and organized workspace in accordance with 6S standards

* Travel required between Austin and Dallas * At Frontier Energy, we’re more than just engineers and professionals—we’re a team of innovators, problem-solvers, and visionaries dedicated to advancing clean energy solutions. Our mission is to pioneer the intelligent use of energy for a sustainable and resilient future. We offer a collaborative and dynamic workplace where your ideas are heard, nurtured, and transformed into impactful solutions. With a flat hierarchy and open-door policy, every team member is empowered to experiment, take ownership, and make a real difference. Beyond fostering an inspiring culture, we provide competitive compensation, comprehensive benefits, and opportunities for growth. Join us and be part of a team that’s shaping the future of energy while leaving a positive impact on the world. The Energy Efficiency Community Outreach will work directly with end users to document energy-efficient equipment upgrades (i.e. lighting, HVAC, motors, controls) within Frontier Energy’s Texas service area. This role will require regular travel and may require multiple days in the field. The Energy Efficiency Community Outreach will process energy efficiency rebates and communicate regularly with customers and contractors while building and maintaining professional relationships to continuously bring in new projects. Key Responsibilities • Conduct in person and virtual outreach to secure new program participants, • Work directly with end use customers and trade allies to identify, calculate, and communicate energy conservation opportunities, • Coordinate and conduct facility site visits and energy audits, • Conduct pre- and post-verification site visits at project sites to validate project completion, • Provide periodic reports of key metrics to program leads regarding project status and/or outreach performance, such as participation rates, stakeholder feedback, and outreach effectiveness, • Ensure excellent customer service and satisfaction through regular communication and program delivery, • Identify barriers to participation and develop successful, community-relevant resolutions, • Regularly travel by car to customer sites throughout Frontier Energy’s Texas service area, • Other activities related to energy conservation, analysis, reporting, and customer service as requested Required Skills Description • High school diploma or GED (General Educational Development) equivalent, • 1-2 years of work experience in a related field, • Strong verbal and written communication skills with the ability to convey complex information clearly and persuasively to a variety of audiences both face to face and virtually, • Adaptive learner with a high level of creativity, communication, and problem-solving skills, • Ability to work independently and as part of a collaborative team, • Self-motivated with exceptional attention to detail and ability to manage multiple deadlines, • As this position requires driving, the candidate must have an active, valid, appropriate driver’s license and regular access to a personal vehicle Preferred Skills Description • Knowledge of the energy efficiency field, • Experience conducting outreach for program participation, • Experience working with diverse stakeholders such as contractors, trade associations, community organizations, and/or government entities, • Excellent skills with MS Word®, MS Excel®, MS PowerPoint®, MS Outlook®, and Windows® operating systems

POSITION SUMMARY This position is accountable for performing safety and health activities in construction job sites, industrial plants, or at environmental sites to evaluate and control exposure to physical or environmental hazards. This position requires 90% travel within Texas with occasional trips to CXT and Dallas TAS offices/job sites. The incumbent must have the ability and flexibility to work varying shifts, long hours (8-12 hours) and weekend hours (Saturdays and/or Sundays) according to project needs. The incumbent must also work in different weather conditions (heat, cold, rain, etc.) and office settings (project trailer, job site, office, etc.) The incumbent must support the guiding beliefs and core values of the Company, which are centered on Quality, Safety, Production, and Customer Satisfaction (each of equal weight and importance) but, most importantly, with each built upon the all-important foundation of Integrity. SPECIFIC RESPONSIBILITIES • Conducts job audits by visiting job sites to identify existing or potential hazards., • Ensures all employees are working safely and following safety guidelines/standards per company and state and/or federal laws., • Investigates accidents and prepares accident reports., • Identifies potential causes for accidents and recommends changes in policies and procedures to prevent accidents and illnesses., • Transports, or accompanies injured employees to medical treatment facilities. Coordinates follow-up visits and work restrictions with medical providers for injured employees., • Develops reports enumerating hazards found, including documentation and verification of proper abatement steps. Assists field personnel in the abatement of hazards., • Measures noise levels and air quality using a variety of equipment or instruments., • Maintains and calibrates instruments of the trade., • Inspects respirators and trains employees on how to use., • Coordinates distribution of personal protective equipment such as vests, gloves, hard hats, harnesses, etc., • Coordinates respirator fit tests at clinic for employees., • Enforces use of safety equipment, including personal protective equipment., • Trains operators of earth and / or material moving equipment such as backhoes, front-end loaders, forklifts, scissor lifts, telescoping boom lifts, among others to qualify for operating authorization., • Trains employees (on-the-job or in classroom settings) on safety and health requirements to ensure compliance with regulations, including new hire orientation., • Conducts new hire training on a weekly basis., • Oversees field activities and monitors for health and safety violations., • Monitors decontamination of personnel leaving hazardous work zones., • Issues and monitors hot work permits, confined space entries, and lockout/tag out permits., • Develops and monitors emergency action plans., • Assists management to prepare safety and health budget., • Ensures and remains accountable for the safety of himself/herself, as well as any others the incumbent encounters. This includes executing their stop work authority on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed., • All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary or trade secret information belonging to the Company. EMPLOYEE SAFETY AND COMPLIANCE • Responsible and accountable for incumbent’s own personal safety., • Responsible and accountable for the safety of all co-workers and any others incumbent comes in contact with., • Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed., • Complies with all applicable laws, regulations and Company policies and procedures, and is subject to appropriate disciplinary action (including dismissal) for failure to do so., • Reports any and all violations of applicable laws, regulations or Company policies and procedures promptly, and is subject to appropriate disciplinary action (including dismissal) for failure to do so. A minimum of 3 years of safety related experience in the construction industry. Associates or Bachelors Degree in Safety or Certificate from technical school/college or related field or combination of equivalent work experience and education is required. Bilingual in English and Spanish is required. Safety professional certifications such as STS-C, CHST, OHST highly desired. In addition, the incumbent must have: • Excellent computer skills including Microsoft Office suite (Word, Excel, PowerPoint), Adobe, and mobile devices (tablets)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Advanced training skills with the ability to speak effectively before groups of customers or employees at all levels., • Current driver's license., • Ability to travel to different job sites in the region’s geographic area approximately 90% of the time., • OSHA 510 and/or 30 required., • First-aid/CPR Instructor is helpful. The Company expects and requires incumbent and each of its other employees to observe and fulfill the above and all other safety responsibilities and actively work toward maintaining a safe workplace. PHYSICAL/MENTAL REQUIREMENTS The incumbent must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. This individual must also have the ability to identify critical issues and formulate action plans with all levels of management, including corporate and executive. The incumbent must possess the ability to remain calm during emergencies and respond appropriately as dictated by the circumstance of the incident and as directed by the Safety Representative or other management personnel. Must be capable of evacuating the work area in a timely manner should an emergency situation arise.

About the company An award-winning commercial general contractor that has been building the state of Texas since 1967. From preconstruction to final close-out, this firm operates on the basis of safety, integrity, leadership, and excellence in every project it builds. The company is a major player in the ground-up market in the K12, retail, and industrial sectors. Come join an organization that truly values their employees while delivering award-winning projects to repeat clients in the DFW Metroplex. About the role The senior project manager will be responsible for delivering a new $300M high school project to completion. Working hand-in-hand with the superintendent, you will be tasked with crafting the master build schedule, RFIs, budgets, vendor and trade partner coordination, and client communication. The ideal candidate will have 10+ years of project management experience leading projects over $80M in valuation. You will report to the business unit leader in the DFW market. Qualifications • A minimum of 10 years of lead project management experience, • Experience managing new construction projects valued at $80M+, • The ability to lead and direct an entire project team of supers, assistants, and project engineers, • Excellent problem solving and client communication skills, • Financial analysis, budgeting, and construction project scheduling skills, • Proficiency in Procore Compensation & Benefits • $140k-$160k base salary, • Monthly vehicle allowance, • Company iPad and phone, • Health and life insurance coverage, • Vacation and 401k match, • Annual bonus program To be considered for this role, apply today with your updated resume and projects list!

Job Description Full Time Dallas, TX Network Connex has been serving the telecom industry for more than 20 years, Network Connex accelerates the performance of fiber and wireless network service providers, data center operators, hyperscale cloud companies, cable MSOs, utilities, government entities, and Fortune 500 enterprises. We offer a full range of turnkey capabilities through seasoned professionals in all ranks to provide our customers with a competitive edge in today’s rapidly evolving markets. Our services include state-of-the-art design and engineering; wireless and fiber construction; fiber placement, testing, and acceptance; construction management; and integration. In addition to competitive base pay, Network Connex offers a robust set of benefits from health, dental, vision, short & long-term disability and more. What sets us apart is you are eligible to participate in our benefits programs the first of the month following your start date. One of the shortest benefits eligibility waiting periods in the industry! Our Vanguard 401(k) plan comes with a 5% company match, which you are immediately vested in, and you can start participating at the same time as all the other benefits! We have 10 (ten) paid company holidays, a generous PTO (Paid Time-Off) accrual schedule, and robust health & wellness programs that can help you earn discounts on your health premiums and more! We go beyond base compensation and give you total rewards! Primary Job Responsibilities: • Provide leadership to the crew from the beginning of a project through completion, ensuring safety and quality standards, budget, and timelines are met, • Review documentation with the crew to prepare for the build, assemble the necessary materials, and determine the required installation methods, • Supervise the tracking of all on-site inventory and materials, • Collect, review, and submit all on-site closeout documentation per the deliverable timelines, • Training crew members on proper safety/quality standards to align with CCDP (Crew Career Development Program), • Verify that the crew members have proper certifications and skillsets to perform the scope of work, • Maintain issued equipment and report deficiencies as needed, • Submit daily reports on-site progress with any potential schedule delays and or needed / missing materials Qualifications and Experience: • Advanced knowledge of installation methods with raw land construction, tower foundations, rebar installation, site layouts, road construction, conduit installation, and ground rings, • 1-3 years supervisory experience, • Computer proficient, • Ability to operate mini-x, skid steers, and other heavy equipment as needed, • Strong verbal communication skills, • Ability to multi-task and work in a fast-paced environment while adhering to the schedule set forth, • Highly organized and detail-oriented, • Ability to motivate, lead, teach, and train on proper work and safety procedures, • High school diploma, general education degree (G.E.D.), or related trade school education, • Must be able to pass pre-employment screening that includes background and drug testing, • Must have a valid driver’s license and a driving record that meets Company requirements, • Must be in good physical condition, • Ability to travel away from home, including weekends, • Ability to work outdoors in all types of weather conditions Network Connex provides a comprehensive benefits package including 401(k), health, dental, vision, life, and disability insurance. Network Connex is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, or national origin. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Job Description Primoris Distribution Services has over 60 years of experience working in the natural gas distribution industry. Over this time, we have maintained numerous customer relationships spanning more than two decades. Providing a safe environment, quality workmanship, and exceptional value to our customers is the foremost focus of our operations Summary: General Foreman position: Needs to have the knowledge of fusing poly pipe, poly pipe installation, meter installation, operating equipment (mini, backhoe), locus view, qualified Atmos OQs is a plus. At least 2 years of experience in Gas distribution work is a must. Description: Perform all task associated with the Gas operation and directs the work for the crew in the performance of the various tasks associated with the operation. Coordinates and inspects gas work to ensure quality control, conformance to company standards and compliance of written legal contracts. Fills out timesheets. Checks personal and vehicle safety equipment and operation of vehicle/equipment daily. Acts as company representative and must effectively communicate with the customer, inspector, superintendent, etc. • Directs the work of the crew in the performance of various tasks associated with the operation, maintenance construction, • Use a variety of tools and machines, such as power drills, grinders, saws, Fusion Equipment, and water spraying equipment, • Able to run projects independently. Evaluate and individual’s ability to perform covered task and to recognize and react to abnormal operating conditions, • Knows, understand and complies with OSHA Safety regulations CDL a plus but not necessary. Education & Minimum Requirements: • High school diploma or GED - Preferred, • Vocational training in a trade – Preferred Experience, • 1 year of experience in the inside and/or outside gas contracting sector – Preferred, • Skilled with various hand and power tools – Required., • Knowledge of gas lines, • Competent operating excavators, backhoe, trencher, etc., • Understands how to use hand and power tools Shoring Installation, • Use company phone /tablet, • Make decisions in an emergency situation Licenses and Certifications- Valid driver license and driving record in compliance with our policy OQs Certification EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any

Job Description Primoris Distribution Services has over 60 years of experience working in the natural gas distribution industry. Over this time, we have maintained numerous customer relationships spanning more than two decades. Providing a safe environment, quality workmanship, and exceptional value to our customers is the foremost focus of our operations Summary: Foreman position: Needs to have the knowledge of fusing poly pipe, poly pipe installation, meter installation, operating equipment (mini, backhoe), locus view, qualified Atmos OQs is a plus. At least 2 years of experience in Gas distribution work is a must. Description: Perform all task associated with the Gas operation and directs the work for the crew in the performance of the various tasks associated with the operation. Coordinates and inspects gas work to ensure quality control, conformance to company standards and compliance of written legal contracts. Fills out timesheets. Checks personal and vehicle safety equipment and operation of vehicle/equipment daily. Acts as company representative and must effectively communicate with the customer, inspector, superintendent, etc. • Directs the work of the crew in the performance of various tasks associated with the operation, maintenance construction, • Use a variety of tools and machines, such as power drills, grinders, saws, Fusion Equipment, and water spraying equipment, • Able to run projects independently. Evaluate and individual’s ability to perform covered task and to recognize and react to abnormal operating conditions, • Knows, understand and complies with OSHA Safety regulations CDL a plus but not necessary. Education & Minimum Requirements: • High school diploma or GED - Preferred, • Vocational training in a trade – Preferred Experience, • 1 year of experience in the inside and/or outside gas contracting sector – Preferred, • Skilled with various hand and power tools – Required., • Knowledge of gas lines, • Competent operating excavators, backhoe, trencher, etc., • Understands how to use hand and power tools Shoring Installation, • Use company phone /tablet, • Make decisions in an emergency situation Licenses and Certifications- Valid driver license and driving record in compliance with our policy OQs Certification EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any

Job DescriptionJoin the Snyder Environmental Family as a Construction Supervisor - Demo & Abatement Are you ready to make a real difference while building a rewarding career in a skilled trade? At Snyder Environmental, the premier environmental remediation firm of the central south, our Construction Workers are the first on site for commercial demolition and renovation projects-removing hazardous materials and making public spaces safer for everyone. From schools and hospitals to military installations and critical infrastructure, our work matters. We believe in doing well by doing good. That's why we offer competitive pay plus $40 per diem and paid lodging when traveling. Our team members enjoy competitive benefits, paid time off, and are treated like family. We invest in your well-being with up to 90% employer-paid health insurance, dental, vision, and company-paid life insurance. As a growing company, we foster advancement and provide opportunities for you to build your future with us. This position requires an asbestos abatement license, which we will provide at company expense if you do not already have one. To join our team, you must have reliable transportation, valid authorization to work in the United States, and the ability to obtain clearances for access to sensitive government facilities. If you have the skills, certifications, and drive to work in challenging environments-and want to be part of a company that values your contribution-Snyder Environmental is the place for you. Business Group/Dept: Operations FLSA: Exempt Reports To: Project Manager Date: February 14, 2022 Purpose of the Position Supervises and coordinates activities of assigned team of workers while demonstrating a commitment to safety, teamwork, and quality work with a high degree of managerial discretion. Reviews job specifications, inspects work site, and confers with contracting agent to evaluate removal project. Essential Position Responsibilities • Estimates length of time, number of workers, and equipment and supplies required to accomplish project., • Assigns and supervises workers in specific tasks, such as setup of equipment and removal and clean-up of asbestos., • Monitors and inspects quality of work during project., • Examines workers' equipment, such as respirator systems, air evacuation and filtration systems, and air quality testing devices, to ensure that they meet company and government safety standards., • May maintain project records and order supplies., • May assist workers in removal activities (see Asbestos Worker Position Description), • Counsels and disciplines workers regarding undesirable performance or behavioral issues in collaboration with Human Resources as applicable., • Responsible for scheduling, tracking attendance, and communicating time off requests and absences to the Project Manager or Human Resources, • Promotes safe and productive work environment with superior employee morale and engagement. Personal Protective Equipment (PPE): Half-face respirator; full-face respirator; steel toed footwear; hard hat; safety vest; protective eyewear; gloves; Tyvek suit Safety Sensitive: Yes Travel: 25% to 100% Licenses/Certifications Required: Asbestos Supervisor Initial Certification; Current Asbestos Supervisor Refresher; Current State Specific Asbestos Supervisor License; Current Valid Physician's Assessment; Current Respirator Fit Test Preferred Education: High School Diploma or GED; Bilingual English/Spanish; OSHA 30; CPR/First Aid Certification

Job Description At Compu Dynamics, we don't just build infrastructure—we create the backbone of the digital future. As North America's premier technology infrastructure design-build partner, we design, construct, and maintain mission-critical data centers for some of the world's most innovative companies. With roots in one of the fastest-growing data center markets in the world, our growth is as intentional as our impact. Summary/Objective: The Traveling Electrical Superintendent is responsible for planning, supervising, and coordinating all in-house manpower and the activities of one or more construction projects across various job sites. This position plays a vital role in ensuring work is performed in accordance with the customer contract, project documents, budget, and schedule. The Superintendent will travel to project sites as needed, primarily supporting mission-critical and commercial electrical projects. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Lays out project work and ensures that materials, tools, equipment, and manpower are scheduled in a timely manner to meet scope, budget, and construction schedules. * Monitors worksite safety and ensures all work is completed with zero accidents. * Coordinates with client personnel and internal project teams to ensure compliance with site-specific security, safety, and access protocols. * Communicates design changes, RFIs, and submittals to the field team and ensures alignment across stakeholders. * Schedules and oversees inspections as required by local and state codes and arranges final inspections. * Prepares daily logs documenting site conditions, manpower, and activities. * Collaborates with the Director of Operations, Operations Manager, and foremen to maintain project momentum. * Oversees punch list completion and project closeout efforts. * Generates pre-construction material and tool lists and develops lookahead schedules for foremen. * Directly supervises assigned field personnel and trade contractors to ensure quality, timeline, and budget expectations are met. * Assists in the recruitment, onboarding, and training of field employees; promotes a safe and growth-oriented work environment. * Evaluates staff performance, coaches team members, and supports ongoing employee development. * Conducts timely and comprehensive performance evaluations. * Operates company vehicles and equipment in compliance with safety protocols and traffic laws. * Submits weekly workforce schedules for field and temp labor to support operations planning. * Maintains and updates staffing forecasts to support proactive workforce planning. * Participates in weekly operations meetings and project lifecycle touchpoints (kickoff, updates, closeout). * Leads on-site commissioning activities and supports successful turnover. * Supports estimating efforts, site surveys, and customer walk-throughs as needed. Competencies: * Strong problem-solving abilities * Excellent communication and time management skills * Ability to multi-task and manage priorities under pressure * Proficiency with Microsoft Office Suite and Bluebeam * Team leadership and mentorship Supervisory Responsibility: This role has direct supervisory responsibility over subcontractors, vendors, foremen, and other electrical field staff. Work Environment: This role operates in a field environment and involves exposure to construction-related hazards, weather conditions, and potential high-voltage systems. Work may be required outside normal hours, including evenings, weekends, and holidays. Physical Demands: While performing this role, the employee may be required to stand, walk, climb ladders, use hands, reach, push/pull, and lift equipment up to 50 pounds. Travel: Extensive travel is required, including overnight stays based on project location. Position Type: This is a full-time position. Required Education and Experience: * High School Diploma or GED * 15+ years of commercial electrical experience, including 5 years in a supervisory capacity * Master Electrician license * Valid driver's license in good standing Preferred Education and Experience: * Experience in data center construction * Previous experience working in multiple jurisdictions or jobsite travel roles #PM23 Compu Dynamics Pay Range$85,000—$139,000 USD Compu Dynamics offers a comprehensive benefits package to include: Medical, Dental, Vision, 401k with dollar-for-dollar company match up to 4%, various voluntary benefits, Employer paid life insurance, 7 Holidays, paid Parental Leave, Volunteer Time Off, up to 4 weeks PTO after 60 days and you get your birthday off! Compu Dynamics, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed, and employees are treated during employment without regard to any of these characteristics. All employment offers are contingent upon successful completion of our pre-employment drug screening, background/criminal check, and motor vehicle check.