Trabajos welder en Arlington, TexasCrear alertas

Job Description Job Position: Aluminum Welder Location: ARLINGTON, TX 76010 Pay Rate: $19.00 - $22.00/hr 1st Shift: 6:00 AM - 2:30 PM Monday-Friday (OT Available) Description: Ascend Staffing is hiring experienced Aluminum Welders for our client based in Arlington, TX. The client is a national manufacturer, supplier, and installer of canopies and related components that services all sectors of the Retail Petroleum Industry, from independent oil marketers to major oil companies and large convenience store chains. Responsibilities: Interpret engineering drawings, blueprints, and welding specifications to determine welding requirements. Read and follow shop drawings and production schedules to fabricate aluminum components accurately. Select appropriate welding equipment, tools, filler metals, and materials for aluminum welding applications. Set up and adjust welding machines, including voltage, wire feed speed, gas flow, and other welding parameters. Perform MIG welding on aluminum components according to company and customer specifications. Fit, align, and assemble aluminum parts prior to welding. Monitor welding processes to ensure quality, consistency, and proper penetration. Conduct visual inspections of welds to identify defects, discontinuities, or imperfections. Inspect completed assemblies for dimensional accuracy and compliance with specifications. Perform quality control checks to ensure welded components meet structural, cosmetic, and performance standards. Make necessary adjustments and repairs to maintain production quality requirements. Maintain welding equipment and ensure proper operation and preventative maintenance. Adhere to all safety procedures and company policies to prevent accidents and injuries. Use required personal protective equipment (PPE), including welding helmets, gloves, safety glasses, and protective clothing. Maintain a clean and organized work area. Required Qualifications Minimum 2 years of aluminum MIG welding experience in a manufacturing or fabrication environment. Ability to read and interpret blueprints and fabrication drawings (required). Experience fitting and assembling aluminum components prior to welding. Knowledge of aluminum welding techniques, weld symbols, and quality standards. Ability to operate hand tools, power tools, grinders, and fabrication equipment. Experience performing visual weld inspections and maintaining quality standards. Ability to lift up to 50 pounds and stand for extended periods. Strong attention to detail and commitment to producing high-quality welds. Ability to work overtime and occasional weekends as needed. Contact Us Ascend Staffing: Irving Branch Visit Us: 4425 W. Airport Freeway Suite 475, Irving, TX Call Us: 469-284-0830 Text Us: 469-361-1600 Visit Us Online: https://www.ascendstaffing.com/irving/ ID#38211428 @9023 @IN9023 @ZR9023 @TAL9023 Company DescriptionA True Partner in Your Success: Ascend staffing has been connecting great people with great opportunities for over 50 years. Many of our talented workers stay with us for years because they like what they get from Ascend. What We Offer: Weekly Pay Direct Deposit and Debit Card Payment Options Medical, Dental, and Vision Coverage Life and Short-term Disability Insurance Our Purpose Statement: Our purpose is to partner with employees, clients, and the community to create opportunities for growth and mutual success. The Ascend Difference: We do what we say we will do. We are direct and transparent. We find real opportunities with great employers. We support our talent every step of the way. We make a difference in people’s lives. How We Help You: Our recruiters aren’t just about filling jobs. They are about helping you achieve your goals. We put thousands of people to work every year in temporary, temporary-to-hire and direct hire placements. We are always looking for great people. Apply today!A True Partner in Your Success:\r\nAscend staffing has been connecting great people with great opportunities for over 50 years. Many of our talented workers stay with us for years because they like what they get from Ascend. \r\n\r\nWhat We Offer:\r\nWeekly Pay\r\nDirect Deposit and Debit Card Payment Options\r\nMedical, Dental, and Vision Coverage\r\nLife and Short-term Disability Insurance\r\n\r\nOur Purpose Statement:\r\nOur purpose is to partner with employees, clients, and the community to create opportunities for growth and mutual success.\r\n\r\nThe Ascend Difference:\r\nWe do what we say we will do.\r\nWe are direct and transparent.\r\nWe find real opportunities with great employers.\r\nWe support our talent every step of the way.\r\nWe make a difference in people’s lives.\r\n\r\nHow We Help You:\r\nOur recruiters aren’t just about filling jobs. They are about helping you achieve your goals. We put thousands of people to work every year in temporary, temporary-to-hire and direct hire placements.\r\n\r\nWe are always looking for great people. Apply today!

Job Description For more than 80 years, Winholt Equipment has been an industry leader in the design and manufacturing of custom food-handling and food-preparation equipment for the food service industry. We pride ourselves on meeting the ever-changing customer needs through creative engineering, product development, and distribution. We are looking for experienced Stainless Steel TIG Welders to join our team. You will work with thin-gauge stainless steel (18-gauge) to weld, fit, and assemble food-grade products. This job requires strong TIG welding skills and the ability to follow drawings and quality standards. We are also looking for thin-gauge MIG Aluminum welders. What You Will Do • TIG weld stainless steel parts for food‐grade equipment., • Fit, weld, and assemble stainless steel components., • Clean and repair welds as needed., • Follow all safety rules and quality requirements., • Keep your work area clean and maintain equipment., • Work with other welders and production staff to meet daily goals., • Pay close attention to detail and produce clean, accurate welds. What You Need • High school diploma or equivalent (preferred)., • 2–3 years of stainless steel TIG welding experience, or formal welding training., • Ability to weld thin‐gauge (18‐gauge) stainless steel., • Ability to read and understand blueprints or assembly drawings., • Able to lift up to 50 lbs without assistance., • Able to use measuring tools such as a tape measure and square., • Must follow instructions, be reliable, work safely, and work well with a team., • Must produce welds that meet company and customer quality standards. Pay • $22–$24 per hour, based on experience, • Pay rate is not negotiable Winholt offers a full benefits package, including: • Medical, dental, and vision insurance, • Holiday pay is factored into overtime calculations., • Free Life insurance., • Paid time off (PTO), • 401(k) + company match Submit your resume here or apply in person at: Winholt Equipment 1169 North Great Southwest Parkway Grand Prairie, TX 75050 Company DescriptionFounded in 1946, Winholt is a leading manufacturer of Food Service, Food Handling and Material Handling Equipment. For 80 years, our broad product line, technical support, Customer Care Coordinators and multiple manufacturing/distribution facilities give us a global supply chain advantage. Winholt offers excellent quality and capacity. We provide enhanced 3D modeling design, powder coating and advanced manufacturing techniques.Founded in 1946, Winholt is a leading manufacturer of Food Service, Food Handling and Material Handling Equipment. For 80 years, our broad product line, technical support, Customer Care Coordinators and multiple manufacturing/distribution facilities give us a global supply chain advantage. Winholt offers excellent quality and capacity. We provide enhanced 3D modeling design, powder coating and advanced manufacturing techniques.

Job DescriptionTIG Welder $24/hr! (Se habla Espanol) Job Description This role focuses on precision TIG welding of stainless steel components, primarily in the 18-gauge to 14-gauge range, to produce high-quality carts, racks, and trays for commercial use. You will work from blueprints, use a thumb switch TIG setup with a silicon bronze filler rod, and perform fabrication tasks in an industrial environment. Responsibilities • Perform TIG welding on stainless steel materials ranging from 18-gauge to 14-gauge with a high level of accuracy and consistency., • Use a thumb switch TIG welding setup rather than a foot pedal to complete all welds., • Apply silicon bronze filler rod correctly and consistently to meet quality and strength requirements., • Read and interpret blueprints to understand dimensions, tolerances, and weld specifications for each project., • Fabricate carts, racks, trays, and related stainless steel products according to design and quality standards., • Use hand tools and fabrication equipment safely to prepare, fit, and finish parts before and after welding., • Inspect welds visually and dimensionally to ensure they meet internal standards and customer requirements., • Follow all safety procedures and wear appropriate personal protective equipment while working in an industrial environment., • Maintain a clean and organized work area to support efficient production and safe operations., • Collaborate with team members and supervisors to meet production schedules and adapt to changing priorities. Essential Skills • 2–3 years of experience performing TIG welding on stainless steel., • Proven ability to weld using a thumb switch rather than a pedal., • Hands-on experience welding 18-gauge to 14-gauge stainless steel materials., • Proficiency using silicon bronze filler rod in TIG welding applications., • Ability to read and interpret blueprints accurately., • Solid understanding of TIG welding techniques, weld quality, and joint preparation., • Experience with basic fabrication processes related to carts, racks, and trays., • Skilled in using hand tools safely and effectively in a fabrication setting. Additional Skills & Qualifications • Previous experience working in an industrial manufacturing or fabrication environment., • Ability to work independently and as part of a team to meet production goals., • Strong attention to detail and commitment to producing clean, precise welds., • Reliability in attendance and punctuality for assigned shifts. Why Work Here? You will join a production-focused environment where your TIG welding skills directly contribute to visible, high-usage products. The role offers stable, full-time hours on defined shifts and the opportunity to refine your craft on stainless steel fabrication work. You will work alongside experienced welders and fabricators in a setting that values consistent quality, safe work practices, and reliable teamwork. Work Environment This position is based in an industrial, non-climate-controlled facility where temperatures can become hot, especially during warmer months and near production equipment. You will work around fabrication machinery, welding equipment, and hand tools throughout your shift. Multiple openings are available across two shifts: a first shift from approximately 6:00 a.m. to 2:30 p.m., and a second shift from approximately 2:30 p.m. to 11:00 p.m., which may occasionally run from 3:30 p.m. to 12:00 a.m. You will wear appropriate personal protective equipment and attire suitable for welding and industrial work. Job Type & Location This is a Contract to Hire position based out of Grand Prairie, TX. Pay and Benefits The pay range for this position is $22.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Grand Prairie,TX. Application Deadline This position is anticipated to close on Jun 17, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: For more than 80 years, Winholt Equipment has been an industry leader in the design and manufacturing of custom food-handling and food-preparation equipment for the food service industry. We pride ourselves on meeting the ever-changing customer needs through creative engineering, product development, and distribution. We are looking for experienced Stainless Steel TIG Welders to join our team. You will work with thin-gauge stainless steel (18-gauge) to weld, fit, and assemble food-grade products. This job requires strong TIG welding skills and the ability to follow drawings and quality standards. We are also looking for thin-gauge MIG Aluminum welders. What You Will Do • TIG weld stainless steel parts for food-grade equipment., • Fit, weld, and assemble stainless steel components., • Clean and repair welds as needed., • Follow all safety rules and quality requirements., • Keep your work area clean and maintain equipment., • Work with other welders and production staff to meet daily goals., • Pay close attention to detail and produce clean, accurate welds. What You Need • High school diploma or equivalent (preferred)., • 2–3 years of stainless steel TIG welding experience or formal welding training., • Ability to weld thin-gauge (18-gauge) stainless steel., • Ability to read and understand blueprints or assembly drawings., • Able to lift up to 50 lbs without assistance., • Able to use measuring tools such as a tape measure and square., • Must follow instructions, be reliable, work safely, and work well with a team., • Must produce welds that meet company and customer quality standards. Pay • $22–$24 per hour, based on experience, • Pay rate is not negotiable Winholt offers a full benefits package, including: • Medical, dental, and vision insurance, • Holiday pay is factored into overtime calculations., • Free life insurance., • Paid time off (PTO), • 401(k) + company match Submit your resume here or apply in person at: Winholt Equipment 1169 North Great Southwest Parkway Grand Prairie, TX 75050 Requirements:

Job Description For more than 80 years, Winholt Equipment has been an industry leader in the design and manufacturing of custom food-handling and food-preparation equipment for the food service industry. We pride ourselves on meeting the ever-changing customer needs through creative engineering, product development, and distribution. We are looking for experienced Stainless Steel TIG Welders to join our team. You will work with thin-gauge stainless steel (18-gauge) to weld, fit, and assemble food-grade products. This job requires strong TIG welding skills and the ability to follow drawings and quality standards. We are also looking for thin-gauge MIG Aluminum welders. Shift: 6:00am - 2:30PM What You Will Do • TIG weld stainless steel parts for food‐grade equipment., • Fit, weld, and assemble stainless steel components., • Clean and repair welds as needed., • Follow all safety rules and quality requirements., • Keep your work area clean and maintain equipment., • Work with other welders and production staff to meet daily goals., • Pay close attention to detail and produce clean, accurate welds. What You Need • High school diploma or equivalent (preferred)., • 2–3 years of stainless steel TIG welding experience, or formal welding training., • Ability to weld thin‐gauge (18‐gauge) stainless steel., • Ability to read and understand blueprints or assembly drawings., • Able to lift up to 50 lbs without assistance., • Able to use measuring tools such as a tape measure and square., • Must follow instructions, be reliable, work safely, and work well with a team., • Must produce welds that meet company and customer quality standards. Winholt offers a full benefits package, including: • Medical, dental, and vision insurance, • Holiday pay is factored into overtime calculations., • Free Life insurance., • Paid time off (PTO), • 401(k) + company match How to Apply Submit your resume here or apply in person at: Winholt Equipment 1169 North Great Southwest Parkway Grand Prairie, TX 75050 Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insuranceCompany DescriptionFounded in 1946, Winholt is a leading manufacturer of Food Service, Food Handling and Material Handling Equipment. For 80 years, our broad product line, technical support, Customer Care Coordinators and multiple manufacturing/distribution facilities give us a global supply chain advantage. Winholt offers excellent quality and capacity. We provide enhanced 3D modeling design, powder coating and advanced manufacturing techniques.Founded in 1946, Winholt is a leading manufacturer of Food Service, Food Handling and Material Handling Equipment. For 80 years, our broad product line, technical support, Customer Care Coordinators and multiple manufacturing/distribution facilities give us a global supply chain advantage. Winholt offers excellent quality and capacity. We provide enhanced 3D modeling design, powder coating and advanced manufacturing techniques.

Job Description Position Mission Support gas turbine repair operations by fabricating and welding components to precise specifications. The TIG Welder analyzes work orders and technical drawings, executes high-quality welds, and ensures compliance with safety and quality standards to meet manufacturing and repair objectives. Schedule: • 1st Shift: Monday–Friday, 7:00 AM – 3:30 PM, • 2nd Shift: Monday–Thursday, 3:30 PM – 2:00 AM Language: English or Spanish Key Responsibilities • Analyze work orders, blueprints, and completed assemblies to determine welding requirements and appropriate techniques., • Fabricate components by cleaning, preparing, cutting, fitting, and TIG welding metal parts., • Set up and measure assemblies to ensure dimensional accuracy., • Select appropriate welding methods and materials based on project requirements., • Inspect and test completed welds to verify quality and conformance to specifications., • Document work performed and complete required production and inspection records., • Maintain a safe work environment by following company procedures and regulatory requirements., • Operate and maintain welding equipment; troubleshoot issues and coordinate repairs when necessary., • Participate in training and skill development activities to enhance welding proficiency., • Support overall manufacturing objectives by completing related duties as assigned. Knowledge / Skills / Qualifications • TIG welding experience required (weld test administered prior to employment)., • Experience in welding and fabrication within industrial or turbine repair environments preferred., • Ability to read and interpret blueprints and technical drawings., • Basic knowledge of welding safety practices and procedures., • Experience using power tools and fabrication equipment., • Strong documentation and record-keeping skills., • Dependability and ability to work independently or within a team., • Ability to lift and handle materials in a manufacturing environment. Physical Requirements • Ability to lift and move materials as required., • Ability to stand for extended periods. Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Powered by JazzHR NtQcbMWasH

Job DescriptionJob description: Overview We are seeking a highly skilled and motivated TIG Welder to join our dynamic fabrication and construction team. In this role, you will be responsible for executing precise welding tasks using Tungsten Inert Gas (TIG) techniques to create high-quality metal assemblies. Your expertise will contribute to the successful completion of diverse projects, from structural steel to ductwork and pipe systems, ensuring adherence to safety standards and engineering specifications. This position offers an exciting opportunity to work on challenging projects in a fast-paced environment, utilizing your technical skills and mechanical knowledge to deliver exceptional results. Responsibilities Perform TIG welding on various metals, including sheet metal, pipe, and structural components, following detailed blueprints and schematics. Read and interpret technical drawings, schematics, and welding symbols accurately to ensure precise fabrication. Utilize hand tools, power tools, calipers, micrometers, and other measurement devices to verify dimensions and quality of welds. Prepare materials by cleaning, cutting, and fitting components prior to welding using plasma cutters, press brake machines, or other fabrication equipment. Maintain a clean and safe work environment by adhering to OSHA standards and company safety protocols during all welding operations. Conduct inspections of welds using non-destructive testing methods when necessary; document findings for quality assurance purposes. Collaborate with team members on assembly, rigging, machining, and installation tasks related to construction or manufacturing projects. Experience Proven experience in TIG welding across various metals such as stainless steel, aluminum, or specialty alloys; experience with welding is a plus. Strong background in construction site environments with knowledge of site safety procedures and rigging techniques. Familiarity with MIG welding (Metal Inert Gas) and FCAW (Flux-Cored Arc Welding) processes is desirable. Ability to read blueprints, schematics, and technical drawings accurately; knowledge of ASME codes & standards is advantageous. Mechanical aptitude with basic math skills for measurements and calculations; experience with pipe threading and assembly is preferred. Hands-on experience operating fabrication equipment such as press brakes, plasma cutters, power tools, forklifts, and machining tools. Knowledge of ductwork fabrication, sheet metal work, soldering, plasma cutting techniques, and assembly processes in manufacturing or construction settings. Join our team if you’re eager to apply your welding expertise in a collaborative environment that values precision craftsmanship and safety! Bilingual a plus.

Job Description Must be able to perform welding procedures according to code based on project needs and specs. More information to come...

Job Description We are seeking a Welder - Immediate Need to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Interpretation of Print & Traveler: Accurately interprets pertinent data that is contain on the Print and Traveler and apply it to the task being performed., • Machine Set-Up: Ensures all machine parameters are properly adjust prior to beginning any operation., • Part Welding: Welds parts according to the print specifications, stopping after the first part is completed for First Part Quality Inspection as required., • Must be able to MIG and TIG weld steel, stainless steel and aluminum, • Product Quality Checks: Performs quality checks on as instructed to ensure that the parts are defect free., • Completes all documentation associated with the job is accurately completed prior to sending the parts to the next operation., • Performs other tasks as directed by the immediate supervisor or management. Advises immediate supervisor on all problems encountered and not resolved. Physical Requirements: • Must be able to handle parts up to 35 pounds., • May be asked to perform other tasks within reasonable exertion limits to assist other shop as required. Preferred Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload Minimal Qualifications: • High school education desired but not mandatory., • Must be thoroughly familiar with the various welding techniques and the checking of proper equipment operation., • Must be able to adjust equipment to produce quality welds on various types materials.Company DescriptionJayco Manufacturing Website: www.jaycomfg.comJayco Manufacturing\r\nWebsite: www.jaycomfg.com

Job Description POSITION SUMMARY We are seeking a skilled welder and fabricator for an hourly role at our plant. The ideal candidate will excel both independently and within a team environment. A strong work ethic and sound judgment are essential. DUTIES AND RESPONSIBILITES • Responsible for the fabrication and welding of industrial equipment, fixtures, and other custom components., • Interpret layouts, blueprints, drawings, and measurements., • Versatile in all aspects of welding, including MIG, TIG, stick, plasma, brazing, and soldering., • Cutting and assembling materials., • Torch cutting., • Use and maintain welding equipment., • Follow all safety guidelines and regulations, including proper PPE., • Perform welding and fabrication tasks with high quality and precision., • Work proactively to drive process improvements and achieve results., • Identify areas for improvement and recommend actionable solutions., • Maintain a strong attention to detail in a fast-paced, collaborative setting., • Other duties as assigned This list is not inclusive of the total scope of job functions to be performed. Duties and responsibilities may be added, deleted, or modified at any time. MINIMUM QUALIFICIATION REQUIREMENTS • Proven welding capabilities and a solid operational and technical background., • Ability to work independently and as part of a team., • Action and goal-oriented mindset., • Must be able to read, write and verbally communicate in English EDUCATION • Professional certifications from an accredited school, • High School diploma or equivalent EXPERIENCE • 5+ years as a welder/fabricator, • Knowledge of ferrous and non-ferrous metals, • 5+ years Aluminum welding, • Experience using a variety of welding equipment, machinery and procedures, • Experience in using electrical or manual tools, • Ability to read and interpret technical documents and drawings, • Attention to det, • Problem solving and time management skills, • Effectively communicate WORKING CONDITIONS The typical work area is within the factory and welding area. There are times where outside work may be required. Welding, soldering, and brazing workers often are exposed to intense light created by the arc, fumes, and very hot materials. The wearing of safety shoes, goggles, hoods with protective lenses, and other devices designed to prevent burns and eye injuries is required. ORGANIZATIONAL RELATIONSHIPS Reports to Maintenance Supervisor FLSA STATUS Non-Exempt PHYSICAL REQUIREMENTS • The physical demands include, but are not limited to sitting, standing, walking, communicating, seeing, hearing, use of hands, and lifting., • Able to lift up to 50lbs OTHER REQUIREMENTS The qualifications listed above are intended to represent the minimum skills and experience levels associated with performing the essential functions of this job. Reasonable accommodation will be made to enable individuals with disabilities to perform the essential functions. The qualifications should not be viewed as expressing absolute employment or promotional standards, but as general guidelines that should be considered along with other job-related selection or promotional criteria. Petmate is an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law.

Job Description For more than 80 years, Winholt Equipment has been an industry leader in the design and manufacturing of custom food-handling and food-preparation equipment for the food service industry. We pride ourselves on meeting the ever-changing customer needs through creative engineering, product development, and distribution. Job Overview We are looking for dependable MIG Aluminum Welders to join our team. In this job, you will fit, weld, and assemble aluminum parts using MIG welding. You will read basic drawings, set up parts, and check your work to make sure it meets our quality standards. Main Responsibilities • Weld and assemble aluminum parts using MIG welding., • Clean and repair welds when needed., • Follow all safety rules and company quality standards., • Keep your work area clean and take care of tools and equipment., • Work with other welders and production staff to meet daily goals., • Pay close attention to detail while completing your tasks. Qualifications • High school diploma or equivalent (preferred)., • 2–3 years of MIG aluminum welding experience, or formal welding training., • Ability to read simple blueprints or drawings., • Able to lift up to 50 lbs., • Able to measure materials using a tape measure, square, etc., • Must be reliable, safety-minded, and able to work well with a team. Job Requirements • Pay is $20/hr, • Must be able to work either shift., • Must have at least 1 year of thin-gauge aluminum MIG welding experience., • Must be able to work on-site in Grand Prairie, TX. Winholt offers a full benefits package, including: • Medical, dental, and vision insurance, • Holiday Pay is the time when calculating overtime, • Free Life insurance., • Paid time off (PTO), • 401(k) + company match Submit your resume here or apply in person at: Winholt Equipment 1169 N. Great Southwest Pkwy Grand Prairie, TX 75050 Company DescriptionFounded in 1946, Winholt is a leading manufacturer of Food Service, Food Handling and Material Handling Equipment. For 80 years, our broad product line, technical support, Customer Care Coordinators and multiple manufacturing/distribution facilities give us a global supply chain advantage. Winholt offers excellent quality and capacity. We provide enhanced 3D modeling design, powder coating and advanced manufacturing techniques.Founded in 1946, Winholt is a leading manufacturer of Food Service, Food Handling and Material Handling Equipment. For 80 years, our broad product line, technical support, Customer Care Coordinators and multiple manufacturing/distribution facilities give us a global supply chain advantage. Winholt offers excellent quality and capacity. We provide enhanced 3D modeling design, powder coating and advanced manufacturing techniques.

Job Description Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at www.thompsonpipegroup.com Thompson Pipe Group is currently looking for a Welder III 2nd Shift Star time at 5pm This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities • Follow all safety rules, policies, and procedures., • Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required., • Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch., • Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed., • Performs minor maintenance and repairs to welding equipment and tools., • Must properly use tools and care for equipment provided by the company to complete job tasks., • Maintain workstation by keeping it clean, organized, free from clutter and trip hazards., • Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions: • FCAW welder qualified to weld on Fittings and pipe and make repairs according to qualifications, • Follow all safety rules, policies, and procedures., • Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA/ASME standards., • Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch., • Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed., • Performs minor maintenance and repairs to welding equipment and tools., • Must properly use tools and care for equipment provided by the company to complete job tasks., • Maintain workstation by keeping it clean, organized, free from clutter and trip hazards., • Work under general supervision; will report to a crew leader and/or supervisor., • Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment., • Organizational Support: Follows all policies and procedures; Supports organization's goals and values, • Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively., • Self-Management, • Attendance/Dependability/Flexibility, • The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock, • There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site, • Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.), • An improperly illuminated or awkward and confining workspace, • Working above ground level where the possibility of falling exists (i.e.on ladders, rooftops, bucket trucks, scaffolding), • Loud (examples: metal can manufacture department, large earth-moving equipment) Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the job. • While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch., • The employee is repeatedly required to climb vertical ladders., • The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds., • The employee must regularly apply75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc., • Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. What We Offer: • Top-tier Medical, Dental, and Vision Benefits, • Life and Supplement Life, • Company Matched 401K Retirement Plan, • Paid Holidays, • Fun Events, • Training and Development, • Employee Discounts, • Career Opportunity! EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Pressure is an Equal Opportunity Employer Continue Job Types: Full-time, Contract

Job Description Polk Mechanical is looking for the best and brightest in the DFW market to join our high performing team. As a result of our unparalleled customer service and unique offerings our business is experiencing impressive growth and with growth comes great opportunity for those with the ambition to accomplish great things. A career at Polk is not just a job but an opportunity to join a family of people who care about each other and care about their customers. It’s no wonder our business and our team are growing! Are you a professional welder looking for a new opportunity?? Welders use accepted trade methods and a variety of manual welding processes, for example, several different gas torch processes, various electric are processes including inert gas shielded ones, or a number of both kinds of processes, to weld all types of commonly used metals and alloys of various sizes, shapes, and thicknesses, including dissimilar metals such as copper to steel. Welders also assure complete penetration when required as well as complete fusion of base and filler metals. They control the metals and the welding techniques to prevent distortion or burning of the metals, and to meet weld dimension, tolerance, strength, and other requirements. The welds are made in all positions including flat, horizontal, vertical, and overhead. Job Description: • In this role you will be in the non-supervisory work of welding metals and alloys., • The work requires knowledge of electric, gas, and other welding processes such as electron beam welding, and the skill to apply these processes in manufacturing, repairing, modifying, rebuilding, and assembling various types of metal and alloy parts, equipment, systems, and structures such as buildings, aircraft, and ships., • You will determine the welding techniques to use and select the proper materials such as the right size and type of welding electrodes or rods., • You will plan and lay out the work from blueprints, sketches, drawings, specifications, and work orders., • The welder will apply a variety of manual welding processes to make more difficult welds, including welds in hard to reach places that must meet close tolerance, strength, and other requirements, for example, evenness of fit and smoothness of contour. Final products are reviewed to see that welds are free from cracks, slag, or other defects, and meet specifications and accepted trade standards. Welds are subject to radiographic, magnetic particle, dye penetrant, pressure inspection, and other tests. Requirements: • Welders may be involved in the gas welding torch processes such as oxy-acetylene, and other industrial gases. The arc processes used (including inert gas-shielded ones) involve methods such as gas metal-arc, gas tungsten-arc, gas carbon-arc, plasma-arc, and atomic hydrogen welding., • Welders apply knowledge of welding standards and how various metals and alloys such as different kinds of steel, chrome, aluminum, cast iron, nickel, Monel, brass, copper, bronze, magnesium, beryllium, and titanium react to different welding processes and techniques. OSHA-10 certification is required. If you currently do not possess an OSHA-10, we will give you the opportunity to take the course prior to your employment.

Job Description Who We are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at www.thompsonpipegroup.com Thompson Pipe Group is currently looking for a Welder II. This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities • Follow all safety rules, policies, and procedures., • Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required., • Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch., • Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed., • Performs minor maintenance and repairs to welding equipment and tools., • Must properly use tools and care for equipment provided by the company to complete job tasks., • Maintain workstation by keeping it clean, organized, free from clutter and trip hazards., • Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions: • Must pass 3G with the back gouge and back weld with FCAW process, • Must be able to weld within criteria. ASM section 8 UW-51 (100% RT X-Ray), • Must be able to maintain a 92% acceptance rate with ASME section 8 UW-51 (100% RT X-Ray), • This position frequently requires standing, sitting, kneeling, stooping, crawling, climbing, use of hands to handle objects, operate controls, and tools. No limits of a range of motion., • Able to carry out instructions furnished in written, oral, and verbal form., • Must be experienced in flux-core welding, SMAW, SAW a plus., • Must be familiar with standard concepts, practices, and procedures within the welding field., • utilize the flux-core welding process, cutting torch, hand-held grinders, and whatever other tools necessary to complete these repairs. Competencies To perform the job successfully an individual should demonstrate the following competencies. • Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment., • Organizational Support: Follows all policies and procedures; Supports organization's goals and values, • Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively., • Self-Management, • Attendance/Dependability/Flexibility, • The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock, • There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site, • Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.), • An improperly illuminated or awkward and confining workspace, • Working above ground level where the possibility of falling exists (i.e. on ladders, rooftops, bucket trucks, scaffolding), • Loud (examples: metal can manufacturing department, large earth-moving equipment) Physical Demands Reasonable accommodations may be made to enable individuals with disabilities to perform the job. • While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch., • The employee is repeatedly required to climb vertical ladders., • The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds., • The employee must regularly apply 75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc., • Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. What We Offer • Top-tier Medical, Dental, and Vision Benefits, • Life and Supplement Life, • Company Matched 401K Retirement Plan, • Paid Holidays, • Fun Events, • Training and Development, • Employee Discounts, • Career Opportunity! EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Pressure is an Equal Opportunity Employer Continue

Job DescriptionJob description: Job Overview We are looking for dependable MIG Aluminum Welders to join our team. In this job, you will fit, weld, and assemble aluminum parts using MIG welding. You will read basic drawings, set up parts, and check your work to make sure it meets our quality standards. Main Responsibilities Weld and assemble aluminum parts using MIG welding. Clean and repair welds when needed. Follow all safety rules and company quality standards. Keep your work area clean and take care of tools and equipment. Work with other welders and production staff to meet daily goals. Pay close attention to detail while completing your tasks. Qualifications High school diploma or equivalent (preferred). 2-3 years of MIG aluminum welding experience, or formal welding training. Ability to read simple blueprints or drawings. Able to lift up to 50 lbs. Able to measure materials using a tape measure, square, etc. Must be reliable, safety-minded, and able to work well with a team. Job Requirements Pay is $18/hr Must be able to work either shift. Must have at least 1 year of thin-gauge aluminum MIG welding experience. Bilingual a plus.

Welder – Pembroke, NH | Global Food Processing Equipment Manufacturer | $22–32/hr + Full Benefits This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: Founded over seven decades ago and based in Pembroke, NH, with other offices and facilities worldwide, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? • Competitive Compensation: Excellent hourly pay (DOE), • 401(k), • Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, • Paid Holidays, PTO, Sick Leave, and Birthday Off, • Stable Employer: No layoffs in decades, even during downturns, • Collaborative Shop Environment: Tight-knit team with mentorship opportunities, • Consistent Day Shift: 7:00am–3:30pm schedule Job Details Key Responsibilities and Duties: • Perform TIG and MIG welding on large stainless steel industrial equipment, • Weld thin gauge stainless steel (primarily 16 GA) with attention to cosmetic and sanitary standards, • Read and interpret blueprints, drawings, and job orders to determine work requirements, • Assemble and fabricate stainless steel components for fryers, ovens, and conveyor systems, • Ensure welds meet structural and aesthetic standards required for USDA-inspected equipment, • Collaborate with fabrication and assembly teams to meet deadlines and maintain product quality, • Maintain tools, safety standards, and cleanliness in compliance with manufacturing policies You should have most of the following: • High school diploma or equivalent (technical training preferred), • Minimum 3 years of TIG and MIG welding experience (stainless steel preferred), • Experience working with thin gauge metals (16 GA or similar), • Ability to read and interpret mechanical blueprints and drawings, • Strong mechanical aptitude and attention to cosmetic weld quality, • Food or pharmaceutical industry background highly preferred, • Proven ability to meet deadlines and work collaboratively in a production environment Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Interpret blueprints, drawings, and measurements to plan layouts.Weld small and large components such as copper plumbing, beams, and pipelines.Use specialized machinery for industrial welding and oversee machines that perform the same job.Maintain and repair all machinery.Assess welded surfaces, str

Job Opportunity At Kilgore Industries.Kilgore Industries is seeking professionals who are dependable, friendly, and eager to support our expanding business.If you're a career-minded professional looking to make a new start, see what we're all about.As the leading MEP firm in Texas, we're prepared to

PrideStaff - 2080 North State Highway 360, Suite 435 - Responsibilities: Perform specialized TIG welding on thin-gauge (18-gauge) stainless steel parts for food-grade equipment; Fit, assemble, and precisely weld stainless steel components; Follow blueprints and assembly drawings to ensure all parts

Under the supervision of a lead welder, analyze engineering drawings and specifications to plan welding operations where procedural information is unavailable.

A skilled Pipe Welder is needed to join a team in Irving, Texas.

Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations per engineering direction.Reads and comprehends construction drawings and specifications.Lays out and installs piping, equipment, and other mecha

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

PrideStaff - 2080 North State Highway 360, Suite 435 - Responsibilities: Fit, weld, and assemble aluminum parts using MIG welding.Read basic drawings and set up parts.Examine work and measure pieces to ensure conformance with specifications and quality standards.Clean and repair welds when necessary

Waste Connections - - Responsibilities: Perform welding and repairing trash/compactor containers, and trash trucks metal repair; MIG & ARC welding; Maintain a clean, safe work area in compliance with OSHA standards; Performs all work in accordance with established safety procedures, documenting par

The Material Handler may fulfill multiple roles in the Distribution Center environment to help fulfill overall mission to process Inbound and/or Outbound freight accurately, timely, and safely.Performs one or more of a variety of functions in a Distribution Center environment associated with fulfill

Frito-Lay is seeking Warehouse Workers / Material Handlers to work in distribution centers loading, unloading, moving, and organizing snack products for delivery routes.Warehouse Workers are responsible for loading delivery trucks with product, unloading incoming shipments, moving product throughout

The Material Handler may fulfill multiple roles in the Distribution Center environment to help fulfill overall mission to process Inbound and/or Outbound freight accurately, timely, and safely.Performs one or more of a variety of functions in a Distribution Center environment associated with fulfill

Position Type Full Time Travel Percentage Up to 10% Category Warehouse.As a Material Handler at CEC, you'll play an important role in helping construction projects run smoothly.Your job will involve moving tools and materials around job sites and company facilities.You'll also help with deliveries,

Forklift Operator II - 2nd Shift.Find your future with Shaw Industries.Shaw Industries is a Fortune 500 multinational flooring company that employs 20,000+ associates throughout North America.Workers who join Shaw Industries often stay until retirement because we offer great pay, benefits and paid v

PIT II - Forklift Operator Grand Prairie, 2nd Shift.Title: PIT II - Forklift Operator Grand Prairie, 2nd Shift.City, State: Grand Prairie, TX, Texas (US-TX).Classification: Hourly Non-exempt.Benefits Offered: Health, Dental, Life Ins.K) with a company match, Voluntary Benefits include (Short Term Di

Join the team as a Forklift Operator, where you'll play a key role in safely moving, stacking, and tracking products throughout the warehouse.You'll operate powered industrial trucks, support shipping/receiving, and help keep inventory accurateall while maintaining high standards of safety, quality,

Candidates must complete an application at: https://jobs.At this time, CJ Logistics America is unable to offer visa sponsorship or support for work authorization.Lift Your Career to New Heights with CJ Logistics! Are you ready to take the wheel of your future and join a team that values safety, prec

Warehouse Distribution Facility Job.KGPCo is the go-to partner to Communications Service Providers.Our customers rely on our extensive range of network solutions and services to help them build, maintain, and transform networks that connect the world.The communications industry is evolving every day

The Job Center is hiring for a Material Handler 2 for temp-to-hire job openings on the 2nd shift 2:30 pm- 11 pm Monday-Friday in the Fort Worth area.Great environment and great company to work for! Compensation of Material Handler 2:.Unlimited Referral Bonus for anyone NEW who comes to apply and wor

Job Category: Warehouse Operative.Sign off bill of lading (BOL), cross check packing list, picking, put away, work on more challenging material handling equipment, cross checking vendor accuracy, checking for damaged cargo during loading, unloading, labeling cargo.Fills client orders safely, efficie

Title: Material Handler- 3rd Shift.City, State: Irving, TX, Texas (US-TX).Reports to: Production Supervisor.Department: Irving - 3rd Shift IQF Line 1.Classification: Nonexempt Position: Material Handler.Compensation: Hourly Non-exempt.Benefits Offered: Health, Dental, Life Ins.K) with a company matc

Material Handler Employee Jobs | Arlington TX.Focus Workforce Management is seeking Material Handlers for a manufacturing company near Arlington, TX.Ideal candidates will be able to work with minimal oversight but willing to follow detailed instructions.Job duties may include cleaning and preparing

Location: Arlington, TX, US, 76018 Date: May 22, 2026.Work Location Type: Arlington, TX Onsite Imperial Supplies, a Grainger Company, is a national distributor of quality maintenance products.Serving the fleet maintenance industry since 1958, Imperial has formed lasting relationships with customers

Pollo Regio has openings for warehouse workers in our Distribution center/warehouse.We are seeking for committed individuals who enjoys working in a team environment with a growing company.Loading and unloading materials.Focus on accuracy and efficiency of orders being pulled to be sent to locations