Veterans jobs in Los Angeles, California - Page 13Create job alerts

Job Description Hydraulics International, Inc (HII) seeks a Painter II responsible to apply paint to products. Experience: • Prepare and clean surfaces by sanding and wiping them with solvent, • Mask different surfaces as needed, • Load and off-load parts on/from paint racks, • Mix and prepare primer and paint per manufactures’ instruction, • Check appropriate surface treatment and preparation prior to painting, • Spray primer and paint on a wide variety of parts with different sizes, shapes, and contours, • Operate curing oven and monitor temperature and curing cycle time, • Perform visual inspection on painted parts to ensure final quality, • Clean and maintain all paint booth apparatus such as paint guns, filters, etc., • Makes an effort for continuous improvement to work processes for production and/or quality control, • Responsible for following rules & regulations stated in the company handbook, notices & postings., • Responsible for following the written and verbal directions of leads, supervisor and management, • Responsible for maintaining a safe and clean work environment as well as follow the Code of Safe Work Practices., • 3-5 years of experience working in paint shop environment preferably aerospace or automotive industry, • Be detail-oriented and meticulous, • Be able to mix and prepare wide variety of paint and primer product (gloss, semi-gloss, flat) with different formulations, • Basic understanding of blueprint and engineering drawing, • Experience working with work order (job order) document, • Be able to pass respiratory fit test and pulmonary test if required, • Lift up to 40 lbs. Competencies Customer Focus - Anticipating, meeting and/or exceeding customer needs, wants and expectations. Interpersonal Skills - Effectively communicating, building rapport and relating well to all kinds of people. Planning and Organizing - Establishing courses of action to ensure that work is completed effectively. Problem Solving - Defining, analyzing and diagnosing key components of a problem to formulate a solution Salary Expectations: $19.00-$20.00 HR. We offer competitive compensation & benefits package: • 401(k), • Dental insurance, • Health insurance (Dental, Vision, & Life Insurance) HII headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors worldwide. Focused on defense and commercial technology, the Company develops manufactures and supports a broad range of systems for over one hundred industries as well as mission critical and military sustainment requirements worldwide. We are extremely proud of the fact that our extensive design capabilities enable us to produce the most sophisticated units known to today's technology. Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet. Our manufacturing facility is equipped with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices. HII has combined the greatest talent, skill, and equipment to best service our customers' demands. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination and harassment against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability (including physical, emotional, and mental health), or status as a protected veteran. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact (818) 998-1231x2200 for assistance.

Job Description Overview If You’re the Best at Sales, You Have a Place with the Best in Pests As part of the Orkin Commercial sales team, you get the advantage of a highly persuasive pitch: top-notch service from an iconic brand name and the industry leader with almost 125 years of protecting homes and businesses. That’s backed by award-winning training that ensures the professionalism and expertise of all Orkin Pros and the Orkin Guarantee that demonstrates our commitment to customer satisfaction. This role combines your competitive drive and your desire to be part of a talented team. You’ll have the opportunity to maximize your financial potential with high-performance sales skills and contribute to the overall success of the business. And you can earn your way to an annual rewards trip honoring top performers, not to mention chart a path to leadership opportunities. You’ll have more than a job—you’ll have a career with growth potential and benefits that go beyond the basics. This includes a company vehicle, competitive pay and a 401(k) program. Not to mention, you’ll receive opportunities to volunteer and give back so that everyone has a safe place to live, work, and play. Work alongside a team that values safety, professionalism, empathy, integrity and innovation in pursuit of our mission to deliver the peace of mind only an Orkin Pro can provide. With Orkin’s award-winning training program, you’ll receive all the tools you need to succeed. That means no industry experience required to start building your career. Plus, if there’s one thing we know at Orkin, it’s that pests keep coming back, and that makes our industry recession resistant. Ready to start a career with staying power? Apply now! Responsibilities As an Outside Sales Rep, you’ll be responsible for understanding Orkin’s products and services and how to sell them to a variety of industries. You’ll make strategic recommendations to new and existing customers to help prevent pests, uphold quality and safety, and satisfy their regulatory standards. You’ll solve problems and build trusted relationships as an essential partner protecting their business. Adept at listening to needs and clearly explaining practical solutions, you can win over customers with confidence and care. You will… • Prioritize safety in all responsibilities, • Conduct yourself with the utmost professionalism and integrity with customers and coworkers., • Serve as an empathetic problem solver for commercial customers by utilizing the in-depth training provided to recommend the best innovative overall solution for each customer's needs., • Achieve sales goals through prospecting new business and assigned leads., • Utilizing marketing tools to drive new business development., • Conduct an inspection of the interior and exterior of the customer’s commercial property—don’t worry, we teach you how!, • Make recommendations to customers based on your inspection and issues identified by addressing any questions, explaining the solution, and setting expectations so they have peace of mind about their pest program., • Use the iPad we provide to prepare sales agreements and help you stay organized—we will provide training on this too! We Offer… • Estimated first-year earnings: $60,000 - $120,000 USD annually, • Base plus uncapped commission, • Company vehicle with gas card after training is completed, • Company provided iPhone and iPad with sales software, • Comprehensive benefits package including medical, dental, vision, maternity, & life Insurance, • 401(k) plan with company match, employee stock purchase plan, • Paid vacation, holidays, and sick leave, • Employee discounts, tuition reimbursement, dependent scholarship awards, • Industry leading, quality, comprehensive training program Why Orkin? • You’re seeking an opportunity with career potential in a reliable, recession-resistant industry, • You have a service-oriented mindset that leads you to build loyalty and trust with customers, • You hold yourself responsible to commitments, • You value being part of a team, • You want to keep learning, improving and developing as a leader, • You want to join a company that supports the community, • You want a career with a purpose at a mission-driven company that values, • Safety, • Professionalism, • Empathy, • Integrity, • Innovation Qualifications Minimum Requirements: • No Experience Required!! Sales experience preferred, • High School Diploma or equivalent required, • Valid driver’s license required, • Ability to obtain the appropriate pesticide license/certification if required (company paid), • Ability to work in the field independently and interact with our great clients Physical Demands / Working Conditions: Candidates must meet physical job requirements and safely perform the job duties with or without accommodations: • Safely use a ladder within the manufacturer's weight capacity, • Occasionally lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, roof tops, etc. including the ability to climb or balance and stoop, kneel, crouch, or crawl, • Wear personal protective equipment (PPE) which sometimes requires an OSHA-compliant respirator, • Willing to work in different types of weather conditions Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer

Job Description Overview Want to Join the Best in Pest? Go Pro with Orkin. As an Orkin Pro, you’ll put the "pro” in protecting what businesses value most. You’ll have more than a job—you’ll have a career with growth potential and benefits that go beyond the basics. This includes a company vehicle, competitive pay and a 401(k) program. Not to mention, you’ll receive opportunities to volunteer and give back. You’ll join a team backed by more than 120 years of delivering top-notch service, and you’ll be a key player in maintaining our reputation as the best in pests. With Orkin’s award-winning training program, you’ll receive all the tools you need to succeed. That means no industry experience required to start building your career as an Orkin Pro. Plus, if there’s one thing we know at Orkin, it’s that pests keep coming back, and that makes our industry recession resistant. Ready to start a career with staying power? Apply now! Responsibilities The Orkin Pro commits to safely and professionally providing the highest level of protection and service to their customers on a designated service route. Their career starts with in-depth, award-winning training that prepares them with the skills needed to succeed in the responsibility of daily route operations, scheduling, issue diagnosis and treatment planning. With each customer, Orkin Pros work to understand problems and do the right thing to resolve them. You will... • Complete our award-winning training to learn the skills and knowledge required to serve our customers, • Prioritize safety in all responsibilities, • Follow a route schedule and daily operation schedule within an assigned territory and ensure timely and safe arrival at each customer’s location, • Operate a company vehicle safely and ensure cleanliness of the vehicle and equipment, • Conduct yourself with the utmost professionalism and integrity with customers and coworkers, • Serve as a problem solver for each customer with empathy by listening to and understanding their needs and utilizing Orkin Pro expertise to recommend the most efficient and innovative solution, • Meet with customers in their businesses or homes to explain actions taken, ensure satisfaction, and discuss additional services that would give them peace of mind about their pest management, • Inspect the interior and exterior of the customer’s property—don’t worry, we teach you how!, • Communicate with customers to explain actions taken, ensure satisfaction, and discuss additional services that would give them peace of mind about their pest management program, • Complete all required service-related documentation in a handheld device provided for speed and accuracy We Offer... • Competitive earnings starting at $18.00 to $22.00 per hour, including a company vehicle with gas card upon route assignment, • Extensive paid training up front and on an ongoing basis to support continuous improvement; no prior pest control experience is required, • Career opportunities to grow and advance in the company and improve compensation, • Competitive pay with commission opportunity, • Company vehicle and gas card, • Comprehensive benefits package including medical, dental, vision & life insurance, • 401(k) plan with company match, employee stock purchase program, • Paid vacation, holidays and sick leave, • Employee discounts, tuition reimbursement and dependent scholarship awards Why Orkin? • You are interested in an opportunity with career potential in a reliable, recession-resistant industry, • You have a service-oriented mindset that leads you to build loyalty and trust with customers, • You hold yourself responsible to commitments, • You value being part of a team, • You want to keep learning, improving and developing as a leader, • You want to join a company that supports the community, • You want a career with a purpose at a mission-driven company that values, • Safety, • Professionalism, • Empathy, • Integrity, • Innovation Qualifications Minimum Requirements: • No Experience Required – we’ll train you to be a Pro!, • High School Diploma or equivalent required, • Valid driver’s license required, • Ability to obtain the appropriate pesticide license within the first 90 days of employment (company paid), • Ability to work in the field independently, manage route-based assignments and interact with our great customers inside their businesses and/or homes What will my work environment be like? Candidates must meet physical job requirements and safely perform the job duties with or without accommodations: • Safely use a ladder within the manufacturer's weight capacity, • Occasionally lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, roof tops, etc. including the ability to climb or balance and stoop, kneel, crouch, or crawl., • Wear personal protective equipment (PPE) which sometimes requires an OSHA-compliant respirator, • Willing to work in different types of weather conditions Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer #ORK719IND

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Material Planner supports production readiness by planning material requirements, releasing supply from blanket purchase orders, and managing the flow of materials through vendors. This role works closely with Production, Engineering, and Procurement to ensure materials are available to support stable, reliable schedules. The Role Material Planning & Schedule Stabilization • Develop and maintain material plans that support production schedules, minimizing production delays., • Release material from blanket purchase agreements based on demand signals, consumption trends, and agreed‑upon production schedules., • Coordinate with suppliers to ensure timely deliveries that support stable production plans., • Manage the flow of sub-components through vendors to deliver end items to support the production schedule., • Resolve shortages, supplier delays, or quality issues promptly to protect production schedules., • Contribute to cost‑reduction initiatives through improved planning accuracy and cross‑functional coordination., • Review ECOs to understand material, BOM, and process impacts., • Conduct impact analysis to determine inventory exposure, transition timing, and potential effects on production schedules., • Procurement manages strategic supplier relationships, including pricing, contracts, MOQs, and long‑term performance., • Maintain compliance with ITAR/EAR and DFARS regulations., • The Planner manages operational execution, including:, • Releasing supply from blanket purchase orders., • Confirming and tracking delivery dates., • Monitoring short‑term supply risks., • Advise the Buyer to any shortages in the negotiated supply., • Assist in the development and preparation of vendor KPIs., • Keep leadership advised of risks or opportunities that may affect the agreed upon production schedule.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Must meet the definition of a US Person, • Experience in a ITAR/DFAR environment, • Bachelor's degree., • Ability to plan into the future and execute to established plans., • Excellent exception management skills., • Ability to work with ambiguity and condensed timelines., • Must have strong analytical skills and the ability to extract and communicate fact patterns impacting supply., • Experience with Outlook, Excel and ERP systems., • Ability to work in a cross functional group.Preferred Qualifications, • Bachelor or masters degree in mechanical or industrial engineering, business and/or with supply chain related major., • 5+ years of previous supply chain related experience., • Experience in the automotive arena., • Advanced Excel and Power BI., • Experience with Oracle Fusion ERP, • APICS Certification (CPIM, CSCP)Work Environment, • This role operates in both office and manufacturing floor environments, requiring occasional interaction with production teams to address planning and operational needs., • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Econolite® is an innovator of Intelligent Transportation System (ITS) solutions, products, and services. Our technology is helping save lives and making the Smart City a reality. If you want to be at the forefront of this intelligent technology revolution, we want to talk to you about being part of our team. Econolite is committed to employing the best talent that will make significant contributions to building a safer, connected world. Econolite’s ITS solutions ease traffic congestion, provide safer mobility, and improve quality of life. As the one-stop-shop leader for traffic management systems, sensor products, and services, Econolite is committed to the advancement of connected and autonomous vehicles, smart cities, and cybersecurity. Under the direction of the Senior Manager of Test and Support Engineering, the Senior Traffic Applications Engineer serves as a subject matter expert in traffic engineering, traffic operations, and detection technologies, leading testing and validation efforts for Econolite’s traffic control and detection products. This role is responsible for testing advanced systems, analyzing complex customer applications, troubleshooting field issues, and ensuring products meet industry standards and operational requirements. This role will collaborate closely with development, product management, and systems engineering teams to influence product direction and feature implementation. With a strong background in traffic signal operations and detection system performance, the ideal candidate will also drive continuous improvement in testing methodologies and application support, helping to shape the future of Econolite’s traffic management and detection solutions. DUTIES: • Lead the creation and execution of comprehensive test plans and test cases for embedded software across Econolite’s traffic controller and detection product lines., • Apply expert knowledge of traffic engineering principles, signal operations, and user behavior to develop realistic and high-impact test scenarios., • Evaluate and troubleshoot detection product performance, including radar and video-based systems, using a strong understanding of analog/digital signals and network topologies., • Work closely with engineers, product managers, project/program managers, and other team members throughout all stages of product development., • Review customer specifications and field configurations, identifying gaps and proposing design-level solutions to meet or exceed performance and operational requirements., • Bachelor’s degree in Civil Engineering (Transportation), Electrical Engineering, or a related technical discipline, or equivalent demonstrated technical experience., • 7+ years of hands-on experience in traffic engineering, traffic signal operations, or detection systems, with progressive responsibility in technical roles., • Proven expertise in traffic controllers, sensor technologies (radar and video), and signal turn-on/configuration procedures., • Strong working knowledge of interpreting and troubleshooting electronic schematics, wiring diagrams, and field network topologies (including TCP/IP, VLANs, and routing/switching environments)., • Proficiency in Linux and Windows environments, with experience using diagnostic tools such as Wireshark, logic analyzers, or serial/network monitors., • Experience working directly with customers or agencies, providing field support, troubleshooting, and technical resolution., • Experience in test automation and scripting (e.g., Python, C, or C++) is a significant plus. COMPENSATION The base pay range for this full-time exempt position is $100,000.00 - $125,000.00 per year plus benefits. Pay ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire base pay rates for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training. PHYSICAL REQUIREMENTS Primarily an office-based role with occasional work in lab or field environments. Must be able to lift up to 25 pounds and travel to customer or company sites as needed. BENEFITS This role is eligible for benefits: weekly pay, weekly PTO accrual, paid holidays. Various medical plans, dental, vision, flexible spending accounts, direct deposit. Basic life, LTD, 401k discretionary match. Pet insurance, identity theft protection. DISCLAIMER The above statements are intended to indicate the general nature and level of work performed by employees within this classification. They are not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, skills, and qualifications required of employees assigned to this job. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, marital status, lactation, ancestry/national origin, citizenship, age, disability, arrest and court records, military & veteran's status, Genetic Information & Testing, Family & Medical Leave, or any other classification protected by state or federal law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. An Equal Opportunity Employer - Non-Smoking Facility

Job DescriptionCompany Description RRD provides marketing, packaging, print, and business services to the world’s most respected brands. The company’s proprietary technology, advanced data analytics, and expertise fuel organizational decision-making from strategy through execution, delivering sustainable solutions with the lowest possible environmental impact. Global organizations and regulated industries trust RRD to reduce complexity and drive audience connections across the entire customer journey. Job Description Position summary The Office Services Associate is responsible for adding value in providing daily back office services for our client and teams. Services include but are not limited to reprographics (copy) and mail services in both physical and digital environments, with support for services in hospitality, facilities, audio/visual, reception, and other Williams Lea service lines as needed. Job duties (* denotes an “essential function”) • *Utilize appropriate logs for all office services work., • *Ensure that job tickets are properly filled out before beginning work., • *Perform work in office services, primarily reprographics, mail and intake functions according to established procedures., • *Follow procedures to run jobs in proper order., • *Communicate with supervisor or client on job or deadline issues., • *Meet contracted deadlines for accepting, completing, and delivering all work., • *Troubleshoot basic equipment problems., • Be able to lift up to 50 lbs. on a regular basis., • Prioritize workflow., • Performs Quality Assurance on own and work of others., • Load machines with various paper, toner, supplies., • Answer telephone, emails, and place service calls when needed., • Interact with clients in person, over the phone or electronically., • Adhere to Williams Lea policies in addition to client site policies., • Position operates at sites with maximum of 24/7 operations. Individual shift requirements will vary by site., • Ability to work overtime as needed., • Work is performed in a professional work environment., • Professional attire required., • Hazards include working with office machines (copiers, faxes, scanners, bindery equipment, paper cutters) and cleaning supplies and toner., • Must be able to work standing up all or most of the timeQualifications Job qualifications • High school diploma or equivalent., • Minimum (1) year office services experience preferably in a legal, banking or large corporate environment., • Skilled in the use of mail, phone, email, digital reprographics and mail equipment., • Familiar with general back office procedures to meet and maintain client satisfaction., • Proven customer service skills are required in order to create, maintain and enhance customer relationships., • Good written and verbal communication skills, including professional telephone and email etiquette., • Attention to detail with good organizational skills., • Must be able to meet deadlines and complete all projects in a timely manner., • Ability to handle sensitive and/or confidential documents and information., • Able to make independent decisions that conform to business needs and policy., • Good problem-solving skills, with the ability and understanding of when to escalate a problem to a supervisory level., • Must work well in a team environment., • Must be able to interact effectively with multi-functional and diverse backgrounds., • Ability to work in a fast-paced environment., • Must be self-motivated with positive can-do attitude. Additional Information The rate of pay for this role at the noted RRD location is $21.00/ hour. Typically, roles follow step progressions to a target rate or set increments over time. Depending on the role, in addition to the hourly rate of pay, the total compensation package may also include overtime, shift differential, call-in, and/or stand-by pay. RRD’s benefit offerings include medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with company match, life insurance and other voluntary supplemental insurance coverages, plus parental leave, adoption assistance, tuition assistance and employer/partner discounts. Shift: Monday - Friday, 8am to 5pm #GOC #LI-0925 #li-onsite #WLNAT All employment offers are contingent upon the successful completion of both a pre-employment background and drug screen. RRD is an Equal Opportunity Employer, including disability/veterans

Job DescriptionCome make your mark with Watermark!🎖️ FOUNDED BY USAF VETERANS in 2007, we are proud to be a Service-Disabled Veteran Owned Small Business. 🌎 SUBJECT MATTER EXPERTS specializing in security and risk management. We’re intimately familiar with DOD security programs and mission requirements. ⭐ OUR CORE VALUES drive every action we take as a company. We strive to exhibit PERSPECTIVE, PASSION, COMMUNICATION, INTEGRITY AND ETHICS, and BALANCE in all we do. 💲 COMPETITIVE BENEFITS PACKAGE to address our employees’ physical, mental, emotional, and financial well-being. This includes 100% employer- paid medical insurance, ample paid leave, a free employee assistance program, and a competitive 401k savings plan. At Watermark, our people come first! Emergency Management Specialist – Federal Coordinating Center Support The Emergency Management Specialist provides comprehensive all-hazards emergency management support to the Bureau of Medicine and Surgery (BUMED) N45 Mission Assurance Office. This role supports Continuity of Operations (COOP), Defense Support to Civil Authorities (DSCA), and National Disaster Medical System (NDMS) operations, with a primary focus on Federal Coordinating Center (FCC) patient reception and interagency coordination. The specialist serves as the primary liaison to assigned FCC locations and supports readiness, training, exercises, and operational reporting. In this role you will…. • Manage all-hazards emergency management programs, including Continuity of Operations (COOP) and Defense Support to Civil Authorities (DSCA)., • Support BUMED Operations Center and Crisis Action Team (CAT) training and operations., • Maintain emergency notification systems across all platforms., • Develop and update SOPs and training modules for the Federal Coordinating Center (FCC)., • Facilitate interagency meetings, manage action tracking, and report on resource requests., • Plan, participate in, and assess exercises such as Ultimate Caduceus and Citadel Shield/Solid Curtain, including planning, execution, and post-exercise reporting., • Utilize systems such as TRAC2ES, JPATS, and the BUMED PREP portal to ensure access, data integrity, and information sharing., • Travel as required to FCCs and related sites to support exercises and other operational activities., • Additional duties as assignedExperience Requirements:, • Minimum five (5) years of experience supporting federal or Department of Defense emergency management programs or 10 years of progressively responsible experience in lieu of a degree., • Demonstrated experience supporting:, • Continuity of Operations planning and execution, • Defense Support to Civil Authorities missions, • National Disaster Medical System patient reception operations, • Federal Coordinating Center or Patient Reception Station activities, • Completion of Federal Coordinating Center Course through the Defense Medical Readiness Training Institute within the past three (3) years, • Experience with TRANSCOM Regulating and Command and Control Evacuation System (TRAC2ES), GEO-Health, Joint Patient Assessment and Tracking System (JPATS), National Disaster Medical System databases, and Bureau of Medicine and Surgery Portal for Readiness and Emergency Preparedness (PREP), • Experience supporting DSCA, COOP, and NDMS operations., • Proficiency with Microsoft Office Suite and collaboration tools., • Strong written and oral communication skills.Education Requirements:, • Bachelor’s degree in emergency management, Homeland Security, Public Health, Public Administration, or a related discipline, • OR ten (10) years of progressively responsible emergency management experience in lieu of a degreeDesired Requirements:, • Federal Emergency Management Agency Incident Command System training (ICS-100, ICS-200, ICS-300, ICS-400), • Homeland Security Exercise and Evaluation Program practitioner training, • National Disaster Medical System or Department of Health and Human Services emergency operations training, • Prior support to:, • Navy Medicine or Defense Health Agency emergency management programs, • Bureau of Medicine and Surgery Operations Center, • Crisis Action Team operations, • Participation in large-scale exercises such as Ultimate Caduceus or Citadel Shield/Solid Curtain, • Experience coordinating with:, • United States Transportation Command, • Department of Health and Human Services, • Naval Medical Forces Atlantic or Naval Medical Forces Pacific, • Familiarity with naval medical treatment facility operationsSecurity Clearance Requirements:, • Active Secret clearanceOther Requirements:, • May be required to move equipment/files weighing up to 50 pounds, • May require sedentary work at least 50% of the time, • Reports to a physical location which occasionally requires the ability to traverse between buildings, • Ability to manage stress with a high degree of maturity/professionalism, • Demonstrated critical thinking and leadership skills and the ability to work well with others The anticipated compensation range for this position is $85,000-125,000. Multiple considerations are taken into account when determining the final salary/hour rate, including but not limited to, Contract Wage Determination, education and certifications, relevant work experience, related skills and competencies, as well as Federal Government Contract Labor categories. Central to Watermark’s employment philosophy is the wellbeing of our employees which is why we offer a robust benefits package and wellness program alongside of annual base compensation.) Watermark is an equal opportunity employer. All terms and conditions of employment are established without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, veteran status, or any other protected category under applicable federal, state, and local laws. Powered by JazzHR DnLae8I9He

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose We're seeking a Full‑Stack Software Engineer with solid experience in application development, data modeling, and feature implementation to join our growing team. In this role you will write clean, efficient code, help evolve our platforms, and collaborate closely with product, design, and other engineers to deliver high‑quality features on schedule. The Role • Full‑stack Development: Design, develop, and maintain scalable applications using modern web technologies, with a primary focus on TypeScript (Node.js and front‑end frameworks such as React or similar)., • Data Modeling & Persistence: Create and evolve relational and NoSQL data models that support new functionality and improve existing features., • Feature Delivery: Own individual features from specification through implementation, testing, deployment, and post‑release monitoring., • Code Quality: Participate in peer code reviews, write unit/integration tests, and follow best practices to ensure maintainable, high‑quality code., • Technical Documentation: Produce clear design specs, API documentation, and other artifacts that aid knowledge sharing across the team., • Collaboration: Work with product managers, designers, and other engineers to translate business requirements into technical solutions., • Agile Participation: Contribute to sprint planning, backlog grooming, and estimation sessions as an active member of the development team.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • 5–8 years of experience in full‑stack development, • Fluency in TypeScript with solid experience in Node.js and modern front‑end frameworks (React, Vue, Angular, etc.), • Strong knowledge of relational and NoSQL data modeling, • Demonstrated ability to design and build scalable, maintainable application components, • Proven ability to write clear, concise design and technical documentation, • Excellent communication and collaboration skills; comfortable engaging with non‑technical stakeholders, • Experience delivering features end‑to‑end, including planning, coding, testing, and deployment Preferred Qualifications • Familiarity with manufacturing, aerospace, or defense domains., • Experience with CI/CD pipelines, automated testing, and code‑quality tooling., • Experience mentoring junior developers or providing peer guidance.Work Environment, • E04/ Engineer II - $122,430 - $168,340, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Flexible schedule, • Free food & snacks, • Health insurance, • Paid time off, • Vision insurance PURPOSE AND SCOPE: Provides psychosocial services to patients treated by the facility including in-center and home dialysis patients (if applicable) utilizing Social Work Theory of Human Behavior and accepted methods of social work practice. Works with the health care team to promote positive adjustment, rehabilitation and improved quality of life for our patients. In collaboration with the interdisciplinary team, informs, educates and supports staff in understanding the emotional, psychological and behavioral impact of Chronic Kidney Disease on the patient and family to ensure comprehensive quality care of our patients. Supports the company and their commitment to the Quality Indicators and Outcomes and Quality Assessment and Improvement (QAI) Activities, including those related to patient satisfaction and quality of life and actively participates in process improvement activities that enhance the likelihood that patients will achieve Quality Goals. This is an entry level MSW role. PRINCIPAL DUTIES AND RESPONSIBILITIES: • Patient Assessment / Care Planning / Counseling, • As a member of the interdisciplinary team, assesses patients' psychosocial status, strengths and areas of need that may affect rehabilitation and optimal treatment outcomes as part of the comprehensive patient assessment., • Participates in care planning in collaboration with the patient and healthcare team to identify effective interventions that will help the patient meet rehabilitation, treatment goals, and improve quality of life., • Utilizes patient education programs, established social work theory and methods, social work focused interventions, and quality of life measurement instruments as part of assessment and care planning to address barriers and meet patient treatment goals., • Provides monitoring and interventions for the patient to adjust to dialysis and achieve optimal psychosocial status and quality of life., • Provides supportive counseling services to patients as permitted within the scope of their clinical training and state license., • Provides educational and goal directed counseling to patients who are seeking transplant. Provides information and assists the team and patient with referral to community resources (home health services, vocational rehabilitation, etc.) to facilitate optimal treatment outcomes., • Maintains current knowledge regarding local vocational/educational rehabilitation programs and assist patients with referral and access to vocational rehabilitation to enable them to remain employed, become employed or receive education., • Assesses patient awareness of advance directives; assists with accessing advance directive forms/information and facilitates discussion of advance directive wishes, if necessary, with the healthcare team and the patient's family/support persons., • In collaboration with the physician and nurse, participates in the discussion of patient DNR status in the facility to ensure patient and/or family understand and make an informed decision about their care., • Knowledgeable of and adheres to Social Work Policy and Measuring Patient Physical and Mental Function Policy, including documentation., • Documents based on MSW interaction and interventions provided to patient and/or family., • Quality, • Provides psychosocial support and/or Social Work Focused Interventions to address non-adherence, quality outcome, and quality of life concerns for all patients based on acuity level., • Participates in monthly Quality review meetings with the interdisciplinary team. Reports on quality indicators related to adherence, such as Missed and Shortened Treatments, Quality of Life Trends, and Service Recovery., • Patient Education, • Assesses patient knowledge of kidney disease for barriers that may affect adherence to treatment. Works with patient, family and health care team to provide education tailored to the patients learning style, communication barriers, and needs., • With other members of the interdisciplinary team, provides appropriate information about all treatment modalities., • Facilitates the transplant referral process and collaborates with interdisciplinary team on transplant waitlist management., • Provides ongoing education to patient/family regarding psychosocial issues related to End Stage Renal Disease (ESRD) and all support services that are available., • Reviews patient rights and responsibilities, grievance information (company and network) and other facilities policies with patient and/or the patients representative to ensure patients understanding of the rights and expectations of them., • Collaborates with the team on appropriate QAI activities, • Patient Admission and Continuity of Care, • Reviews Patient Rights and Responsibilities, Grievance Procedure & Important Numbers Handout, Non-discrimination policy, DNR Statement (if applicable) and address any immediate needs/concerns., • Understands the referral and admission process and supports the clinic in regard to the patient needs for scheduling to maximize adherence and adjustment., • The Social Worker will interview the patient to identify root causes or concerns for the discharge request, (i.e. transfer to hospice, relocation, dissatisfaction with services or staff) and share causes/concerns with operational leadership., • Insurance and Financial Assistance, • Collaborates and functions as a liaison for patient with Insurance Coordinators to address issues related to insurance., • In collaboration with Insurance Coordinators, provides information and education to patients about payment to dialysis (federal, state, commercial insurance, state renal programs, AKF HIPP, and entitlement programs)., • Collaborates with the Insurance Coordinator of any changes to patient state that impacts insurance i.e. transplantation, discharged, loss of coverage, or extended travel., • Refers patients to patient billing solutions (PBS) department for questions/concerns in regard to treatment related bills, • Staff Related, • Assists with interview process and decision to hire new personnel if requested by SW Manager/Senior Manager., • Works with the administrative support staff to maintain updated patient resource lists (e.g. maintain updated list of transportation resources)., • Provides training to staff pertaining to psychosocial topics as needed., • Contributes and participates with weekly team huddles. Discusses any urgent patient issues with staff., • Adheres to work defined caseload guidelines based on state regulatory requirements., • Performs other related duties as assigned.PHYSICAL DEMANDS AND WORKING CONDITIONS:, • The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Travel required (if multiple facilities or home visits, if applicable)SUPERVISION:, • Can be accommodatedEDUCATION AND REQUIRED CREDENTIALS:, • Master's degree from an accredited school of social work (MSW)., • Current state licensure (e.g. LCSW, LMSW), requirements for the state of practice., • Current CPR certification preferred.EXPERIENCE AND SKILLS:, • 0 2 years related experienceThe rate of pay for this position will depend on the successful candidates work location and qualifications, including relevant education, work experience, skills, and competencies. Annual Rate: $75,000.00 - $85,000 Benefit Overview: This position offers a comprehensive benefits package including medical, dental, and vision insurance, a 401(k), paid time off, parental leave. EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity Centro De Cuidado maintains a drug-free workplace in accordance with applicable federal and state laws.

Job Description The Quality Engineer will evaluate and/or appraise supplier's manufacturing capabilities to baseline their processes for conformance to various documented commodity checklists, and/or QMS special processes. Establishes part quality evaluation plans from materials requests through material receipt (full life-cycle). Provides resolution and disposition of non-conformance materials to ensure adequate corrective action. • The Quality Engineer is highly supplier-focused, requiring excellent interpersonal and communication skills (oral and written) to manage supplier quality assurance responsibilities and ensure compliance across and at all levels of the organization on major programs from design through production stages., • Evaluation of manufacturing functions and processes to ensure Quality Standards are in place, • Evaluation of inspection and testing processes, mechanisms and equipment; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications., • Participate in QMS Audits for process deficiency and correction., • Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements., • Interact in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality., • Involved in lean and six-sigma quality engineering methodologies., • Will have 'hands-on' knowledge and experience of mechanical (Machine Shop) components, assembly, subsystem and system level concepts., • Strong emphasis on RCCA and CAPA experience., • Minimum 3-5 years with LEAN Manufacturing Application experience., • 3-5 years' experience in areas of Quality Engineering such as: FMEA, SPC, RCCA, Process Control, Product Evaluation and Auditing, • 2-3 years' working knowledge and experience with ISO9100 and AS9100 QMS Processes, especially in Production and Quality Engineering, • 2-3 years' working knowledge and experience with Aircraft Parts and Material Conformity Inspections, • 3-5 years FAI experience with AS9102 (FAI) Protocol, • 3-5 years' knowledge and experience with inspection methods, techniques and protocols., • 3-5 years' experience in understanding and the application of Engineering Mechanical Processes, Standard Drawings Conventions, Interpreting Drawing Specifications (ANSI 14.5) and GD&T, • 3-5 years' experience in understanding and the application of Electronic Assembly Process and Inspection, Standard Conventions (IPC-610, J-Std-1000), Interpreting Schematic Diagrams and Specifications, • Airframe experience required, • AVMS electronic experience required, • Strong English verbal and written communication skills, • Reliable transportation must have current/active drivers' license, • Valid drivers license and auto insurance required, • In lieu of a Degree, 6+ years of hands-on experience as a Quality Engineering in an Aerospace Manufacturing Environment, • Bachelor's degree is preferred from an accredited college in technical discipline (e.g., Industrial Engineering, Mechanical Engineering, Quality Management), • Proficient with Microsoft Office Products (Excel, Outlook, PowerPoint, Word), • Compatible certifications or related college courses, • Team-minded, communicative, proactive, stress-resistant, assertive Benefits: • TRIGO AERO GROUP provides a 2% vacation bonus (2% of salary, excluding reimbursable expenses) for employees who meet the following conditions:, • One year of continuous employment, • Minimum of 1,400 hours worked in the year, • The hours calculation resets after every year, • 401k with employer match – available after 90 days of employment Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR uh2CQULmlF

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Divergent is transforming manufacturing through our Adaptive Production System (DAPS), revolutionizing how complex structures are designed, built, and assembled. We are seeking a highly experienced Senior Metrology & Inspection Specialist to lead inspection strategy and quality assurance across advanced manufacturing processes. This role requires independent judgment, deep expertise in metrology and GD&T, and the ability to influence inspection standards across teams. In addition to executing complex inspections, this position will drive process improvement initiatives and serve as a mentor across disciplines. The Role Precision Inspection & Measurement Execution • Execute visual, dimensional, and functional inspections on complex machined and additively manufactured components using advanced metrology tools., • Interpret engineering drawings and GD&T (ASME Y14.5) to develop and apply robust, fit-for-purpose inspection strategies., • Independently determine and implement inspection methodologies across first article, in-process, and final inspections., • Document and escalate non-conformances in compliance with AS9102, internal quality procedures, and regulatory standards., • Define and refine inspection strategies for additive-to-machined transitions, custom fixturing, and complex geometries., • Serve as a cross-functional partner to production and engineering teams, providing actionable insights to improve part quality and upstream processes., • Contribute to root cause analyses, corrective/preventive actions (CAPA), and internal audits., • Lead initiatives that enhance inspection consistency, reduce variability, and increase efficiency., • Mentor inspectors, machinists, and engineers in blueprint interpretation, metrology best practices, and GD&T application., • Promote a culture of quality and precision through structured coaching and knowledge sharing., • Lead onboarding or training initiatives to strengthen the technical capabilities of the inspection team. Basic Qualifications, • 7+ years of experience in high-precision manufacturing (e.g., aerospace, defense, automotive), • Demonstrated mastery of GD&T (ASME Y14.5) and real-world application of inspection techniques, • Expert proficiency in using and selecting metrology tools based on part geometry and tolerances, • Track record of mentoring others and elevating team inspection standards, • Experience with AS9102 FAI documentation, NCRs, and quality system protocols, • Proven ability to influence process improvements and inspection methodology, • Ability to lawfully access information and technology that is subject to US export controls Preferred Qualifications, • Familiarity with non-contact metrology systems (e.g., laser scanners, structured light), • Working knowledge of QMS standards (AS9100, ISO 9001), • Experience with additive manufacturing, CNC machining, and transitioning from prototype to production, • Proficiency with digital tools like NX, Teamcenter, or equivalent PLM/CAD systems Work Environment, • This is a hands-on technical role for an inspection expert who thrives in a high-precision manufacturing environment, ensuring quality and driving continuous improvement in metrology practices. Compensation, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Automation Engineer supports the daily operations across all of our Robotic Work Centers, including Assembly, Part inspection, Anodize, & post processing lines, for Divergent's flexible robotic manufacturing systems, core to the Divergent Adaptive Production System (DAPS). The ideal candidate will use their expertise in automated systems, industrial robotics, and off-line programming to maintain & generate robotic programs for production parts and ongoing internal projects, while working with cross-functional teams to capture and implement process improvement. Divergent is pushing the boundaries of technology and we need a passionate and agile engineer to help us create the platform for sustainable manufacturing. The Role As an Automation Engineer on the Advance Manufacturing team, you will be at the forefront of implementing advanced automation and robotics systems in our production environment. You will support the day-to-day operations; help refine processes and enable scalability. This role is hands-on, fast-paced, and essential to delivering high-precision, high-reliability hardware across automotive, aerospace, and defense programs. • Create Simulation Studies in Process Simulate on Teamcenter (Tecnomatix), • Help create and maintain customer product manufacturing data for automated work centers., • Help maintain kinematic libraries of hardware systems in robotic simulations, • Generate optimal assembly sequences and validate feasibility, • Perform reach & access studies and validate assembly sequence logic and interference-free robot motions., • Program robots and automated systems to perform specific tasks and functions, • Troubleshoot and resolve any issues with existing automation systems to ensure smooth operation., • Help create and maintain documentation for all automation and robotics systems, including specifications, manuals, and training materials., • Train and mentor other team members on the operation and maintenance of automation and robotics systems, • Continuously monitor and analyze data from automation systems to identify areas for improvement and recommend solutions., • Provide insight, data, & learnings to our development team to help inform our next generation robotic platforms., • Collaborate with suppliers and vendors to procure necessary equipment and components for automation projects, • Adhere to all safety protocols and regulations while working with automation and robotics systems Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's Degree in Mechatronics or Mechanical Engineering or equivalent discipline, a Strong Foundation in Engineering Principles and Theory, • 1+ years performing Robotic Simulation studies for industrial robotic systems or 3+ years of hands-on programming of industrial robotic manipulators, • 3+ year experience operating industrial robots: Kuka, ABB, FANUC, Yaskawa, • Proficiency In CAD (preferable NX) and Simulation Tools., • Must Be Able to Identify and Resolve Issues Quickly and Efficiently, Using Data-Driven Approaches and Critical Thinking Skills., • Strong communication and collaboration skills, able to work effectively with other technicians, engineers, and project teams., • Capable of working autonomously within the focused area., • Ability to lift up to 50lbs, • Ability to climb up and down ladders Preferred Qualifications, • 3+ years of Robotics Simulation work, • Experience with generating and optimizing collision-free robotic motion paths and processes, • Experience with analysis and optimization of robotic system layouts and processes, • Experience with manufacturing automation in automotive or aerospace environments, • Applications experience with robotic material handling, assembly, vision systems, adhesive systems, material removal, welding, or fastening Work Environment, • Working near moving mechanical parts, • This is a hands-on position that will require standing for long durations of your day and working directly with hardware on the floor., • Must be comfortable stooping, bending, and standing., • Engineer II / E04: $122,430 - $168,340, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule: This is a 2nd shift position, Monday–Friday from 12:00 PM to 8:30 PM. Purpose The Robotic Assembly Technician is an essential part of the production team, responsible for operating and supporting automated robotic assembly equipment in a high-volume manufacturing environment. This role focuses on consistent production output, equipment reliability, and adherence to safety and quality standards within the Divergent Adaptive Production System (DAPS). The Role As a Robotic Assembly Technician, you will perform hands-on work operating robotic assembly cells, monitoring production processes, and keeping equipment running safely and efficiently. You will work directly on the production floor, supporting daily schedules, meeting output targets, and ensuring high-quality assemblies for automotive, aerospace, and defense products. Key Responsibilities: Operation & Production • Operate robotic assembly cells according to daily production plans., • Run start-up, dry runs, collision checks, and shut-down procedures., • Monitor part flow, cycle times, and machine performance to stay on schedule., • Make basic adjustments to equipment settings to maintain consistent operation., • Follow all work instructions, quality standards, and SOPs., • Assist with routine preventative maintenance tasks to reduce downtime., • Work with other technicians and operators to keep production running smoothly., • Support training of new team members when needed., • Follow all safety protocols around robotic equipment and moving machinery., • Help keep the work area clean, organized, and compliant with safety standards., • Report any unsafe conditions or concerns immediately. Basic Qualifications, • High school diploma or equivalent., • 1–3 years of experience operating industrial robots (Kuka, ABB, FANUC, Yaskawa) or automated equipment in a production setting., • Basic mechanical and electrical troubleshooting skills., • Experience in automotive, aerospace, or other high-precision manufacturing environments preferred., • Ability to lift up to 50 lbs and climb ladders as required., • Strong communication skills and a dependable work ethic., • Ability to follow SOPs and execute work with increasing independence., • Ability to lawfully access information and technology that is subject to US export controls Preferred Qualifications, • Experience operating Kuka 6-axis robots or similar robotic manipulators., • Familiarity with PLC-controlled equipment and HMI interfaces., • Experience with automated adhesive dispensing equipment., • Background in fast-paced, high-volume manufacturing. Work Environment, • Work near moving mechanical and robotic equipment., • Standing, bending, and hands-on tasks for most of the shift., • Occasional overtime or weekend work based on production needs., • TCH 01: $30.00 - $41.00/hour, • TCH 02: $35.00 - $48.00/hour, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Divergent is hiring an Advanced Manufacturing Production Specialist to coordinate materials, tooling, and workflows across the production floor, ensuring efficient operations, minimal downtime, and on-schedule output in a high-precision aerospace environment. The role acts as a link between machining, engineering, quality, and supply chain teams, resolving constraints and prioritizing work orders while monitoring production status, tracking inventory and tooling, and identifying bottlenecks The Role • Help coordinate daily production activities to ensure alignment with manufacturing schedules and on-time delivery commitments., • Ensure the availability of tooling, materials, and work instructions prior to job release to minimize downtime and production interruptions., • Assist with managing and tracking work orders through ERP/MRP systems, maintaining accurate and up-to-date production status., • Monitor tooling inventory and usage, support tool crib operations, and initiating replenishment or replacement as needed., • Identify and proactively help address production bottlenecks., • Assist with production planning activities, including job sequencing, capacity considerations, and resource allocation., • Maintain accurate documentation, including digital travelers, inspection records, and production logs, in accordance with company requirements., • Contribute to continuous improvement initiatives by identifying inefficiencies and supporting process optimization efforts. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • High school diploma (or equivalent) or relevant aerospace/precision machining experience, • 1+ year of administrative or production support experience minimum in a manufacturing environment, • Strong organizational, multitasking, communication, and problem-solving skills with attention to detail, • Ability to work in fast-paced, deadline-driven production settings, • Familiarity with CNC machining, blueprint reading, tooling, and production workflows, • Basic knowledge of aerospace standards (AS9100) and FAA regulations, • Experience with ERP/MRP systems and proficiency in Microsoft Excel for scheduling, tracking, and data analysis, • Ability to manage and track work orders, inventory, and tooling availability Preferred Qualifications, • Experience in aerospace manufacturing environments (tight tolerances), • Knowledge of First Article Inspection (FAI) & Lean Manufacturing / Six Sigma principles, • Certification or training in:, • APICS / supply chain fundamentals, • Prior experience in:, • Tool crib management, • Production control, • Inventory systems Work Environment, • This role operates in a fast-paced, high-mix production environment where priorities can shift rapidly based on engineering changes, supply chain constraints and Program milestones. The environment demands tight cross-functional collaboration with engineering, manufacturing, quality, logistics and Program teams to ensure daily execution aligns with long-term build plans., • Success in this environment requires hands-on engagement on the shop floor, strong system's knowledge, and the ability to anticipate and resolve scheduling risks before they impact key deliverables., • The culture emphasizes proactive communication, data-driven decision making, and continuous improvement to meet aggressive program timelines while maintaining high standards for quality, safety, and efficiency., • Ability to safely lift and carry up to 50 pounds as part of daily job duties, including loading, unloading, and moving materials. Demonstrate proper lifting techniques to prevent injury, maintain physical stamina for repetitive tasks, and follow all workplace safety guidelines when handling heavy items. Pay Range$36—$50 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose As an Additive Manufacturing (AM) Manufacturing Engineer, you will contribute to manufacturing engineering efforts across the development, build, and production lifecycle of advanced laser powder bed fusion (LPBF) and manufacturing systems. You will partner with cross-functional teams to optimize manufacturability, improve build reliability, and ensure our capital equipment systems meet cost, quality, throughput, and production targets. You will serve as the primary engineering support for multiple subsystems and support critical processes, tools, and workflows that scale us from prototype through production. The Role • Contribute to manufacturing engineering support across multiple LPBF subsystems (e.g., optics, recoater, gas flow, fluid systems) and/or advanced manufacturing modules., • Develop and continuously improve comprehensive work instructions and standard operating procedures for internal and external manufacturing., • Collaborate with design and R&D teams to enhance manufacturability at the component, assembly, and system level., • Conduct design for manufacturing (DFM) analyses to reduce cost and improve cycle time., • Support design changes through PLM, configurations, and change implementation., • Refine manufacturing processes, including assembly, integration, and test operations., • Design, evaluate, and optimize tooling, fixtures, and assembly jigs., • Lead root cause and corrective action (RCCA) activities for manufacturing-related issues., • Improve machine uptime by supporting preventive maintenance strategies., • Partner with supply chain to bring up production lines, support sourcing activities, and resolve supplier technical issues., • Contribute to associated and peripheral factory modules that complement the LPBF printer., • Support the implementation and adoption of enterprise tools like PLM, ERP, and MES systems., • Champion continuous improvement efforts across manufacturing documentation, process control, and product transitions. Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls., • Bachelor's in Mechanical Engineering or related discipline., • 2+ years (Engineer II) or 5+ years (Sr. Engineer) of experience in mechanical engineering, electrical engineering, systems engineering, or manufacturing engineering, preferably in additive manufacturing, capital equipment, or low-volume/high-mix production environments., • Proficient in 3D CAD modeling and drawing creation., • Demonstrated expertise in work instruction development, process documentation, and tooling design., • Familiar with GD&T, tolerance analysis, and basic fabrication/assembly practices., • Experience with PLM systems (e.g., Teamcenter), ERP, and MES tools., • Strong cross-functional collaboration skills across engineering, production, and supply chain., • Adaptable and effective in a fast-paced, dynamic environment., • Hands-on skills in basic fabrication or assembly, • Ability to effectively operate and adapt in a fast-paced, open environment, • Strong communication skills, both verbal and written, • Ability to lift 50 lbs Preferred Qualifications, • Experience with NX CAD and Teamcenter PLM., • Exposure to LPBF additive manufacturing systems., • Understanding of configuration management for complex assemblies., • Background in supplier bring-up and technical issue resolution., • Familiarity with factory layout design and industrial engineering principles., • Experience working with MRP and MES systems. Work Environment, • This role is an on-site role at our Torrance office, manufacturing floor, and laboratory spaces. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels Engineer II - Senior Engineer as evaluated through our interview process. • Engineer II / E04: $111,300 - $153,040, • Senior / E05: $128,520 - $176,720 Pay Range$111,300—$176,720 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact: The Quality Inspector is responsible for performing inspections of raw materials, in-process components, and finished products to ensure compliance with engineering drawings, customer specifications, and quality standards within a precision manufacturing environment. This role supports production and quality objectives through accurate inspection, documentation, problem-solving, and collaboration with cross-functional teams. Depending on experience and level, the Quality Inspector may support or lead advanced inspection activities, quality investigations, continuous improvement initiatives, and mentoring of junior personnel. What you’ll be doing as a Quality Inspector: • Working a full-time, onsite position at our Chatsworth, CA location., • Perform dimensional and visual inspections on raw materials, in-process parts, assemblies, and finished components using precision measurement tools and standard inspection techniques., • Interpret engineering drawings, blueprints, models, specifications, manufacturing plans, and work instructions in accordance with ASME Y14.5 GD&T requirements., • Verify product conformity to customer, regulatory, and internal quality requirements including AS9100 and ISO standards., • Utilize inspection equipment including micrometers, calipers, bore gauges, height gauges, surface plates, optical comparators, and other precision instruments., • Verify calibration status and proper handling of inspection tools and equipment., • Complete and maintain accurate inspection records, traceability documentation, range forms, FAIRs, and other quality documentation as required., • Support or perform First Article Inspection (FAI) activities and AS9102 documentation., • Identify, document, and communicate nonconforming conditions while collaborating with Production, Engineering, and Quality teams on containment and resolution activities., • Participate in root cause analysis, corrective actions, preventive actions, and continuous improvement initiatives., • Maintain inspection staging areas, documentation control, and part traceability throughout the inspection process., • Communicate inspection findings, production status, and quality concerns clearly and professionally to internal teams and customers as needed., • Support audits, customer visits, and quality system compliance activities when assigned., • Train, mentor, or provide technical guidance to other inspectors based on experience and level., • Adhere to all company safety policies and maintain a clean, organized work environment., • Experience in quality inspection within aerospace, precision machining, or manufacturing environments., • Ability to read and interpret engineering drawings, blueprints, specifications, and technical documentation., • Working knowledge of AS9100 and/or ISO 9001 quality management systems., • Familiarity with ASME Y14.5 geometric dimensioning and tolerancing (GD&T)., • Proficiency using standard inspection equipment including micrometers, calipers, bore gauges, height gauges, and related precision tools., • Understanding of inspection methods, measurement techniques, and basic shop math/trigonometry., • Ability to accurately complete inspection and quality documentation., • Strong attention to detail, organizational skills, and problem-solving abilities., • Effective verbal and written communication skills with the ability to work independently and within cross-functional teams., • Experience with First Article Inspection Reports (FAIRs) and AS9102 documentation., • Experience with Coordinate Measuring Machines (CMM) and related software such as Calypso, Mitutoyo MCOSMOS, Verisurf, or similar systems., • Knowledge of advanced inspection methods, statistical process control (SPC), Lean manufacturing, or Six Sigma methodologies., • Experience supporting audits, corrective action investigations, or continuous improvement initiatives., • Technical certification, ASQ certification, or post-secondary education in Quality, Manufacturing, Engineering, or a related field., • Medical, dental, and vision insurance coverage., • Choice of medical plan options, including a no-cost employee-only coverage plan, • HSA-eligible health plan with employer contributions, • Basic and supplemental life insurance, • Long-term disability coverage, • 401(k) plan with up to a 6% QACA company match, • Paid time off including vacation, sick time, and nine (9) paid company holidays, • Shift differentials for applicable off-shifts Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including sexual orientation and gender identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or those requiring a reasonable accommodation to participate in the application or interview process, should contact the RTCA Human Resources Department. Qualified individuals with disabilities or disabled veterans who are unable or limited in their ability to access or use our career center due to a disability may request a reasonable accommodation by contacting Human Resources. Candidates will receive consideration without discrimination in accordance with Article 9, Chapter XVIII of the City of Los Angeles Municipal Code and applicable federal, state, and local laws.

Job Description SUMMARY Perform welding and fitting of the product to meet or exceed the Customer and Quality requirements. Manage time, equipment, and resources with guidance from the Weld Shop Supervisor. The Welder Fitter must be able to explain the respective role within the QMS and how their role contributes to quality. The Welder Fitter shall contribute to product conformity as apart to their daily job function and shall contribute to product safety The Fabrication Welder shall also be aware of ethical behavior and conduct themselves accordingly to Karman policies and procedures. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBILITIES · Maintain and Realize AS 9100 procedures and continuous improvement efforts. · Maintain a clean and organized work environment. · Schedule time and equipment in support of current work assignment. · Provide training and methods of fitting and welding as required by the Weld Shop Supervisor. · Develop shop aids and weld fixtures to assist in daily requirements. · Notify Weld Shop Supervisor when equipment is in need of repair. · Report to Weld Shop Supervisor improvements and recommendations that effect quality and / or schedule. · Must understand how customer products are impacted in the event of failure. · Any other duties as assigned. KNOWLEDGE AND SKILL REQUIREMENTS: · Must be detail oriented, extremely organized, posses excellent communication skills. · Must have excellent blue print interpretation skills. · Must be able to use inspection hand tools. · Must be able to fit both simple and complex assemblies. · Must have direct communication with internal customers. · Must be trained of applicable changes & customer requirements. · Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION & EXPERIENCE · High School Graduation or equivalent. · Adequate years of welding experience determined by Karman. (MIG, TIG, FLUX CORE) · Must have a thorough understanding of weld procedures and specifications. · Must have a thorough understanding of weld machines, preps / set-ups and practices. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. TRAVEL REQUIREMENTS: No travel required for this position. PHYSICAL REQUIREMENTS: As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose We are seeking an early-career Instructional Designer / Learning Experience Designer to help build and scale high-impact learning experiences that drive performance. This role is designed for someone who is curious, hands-on, and motivated to develop craft across the full learning lifecycle—from concept through delivery and iteration. You will contribute to both the design and execution of learning solutions that enable technical teams to learn quickly, apply effectively, and continuously improve. Working at the intersection of content, systems, and operations, you will help translate complex information into clear, practical learning experiences while supporting the infrastructure that makes learning accessible and scalable. This role is an opportunity to build foundational expertise in learning design while contributing to a fast-paced, high-performance environment where learning is directly tied to real-world outcomes. The Role Learning Experience Design • Support the design and development of engaging learning experiences (e.g., e-learning, microlearning, instructor-led, blended programs), • Translate technical or subject matter expert (SME) content into clear, learner-friendly materials, • Assist in applying instructional design principles (e.g., adult learning theory, learning objectives, assessment design), • Create and edit learning assets such as job aids, guides, slide decks, and digital modules, • Support content reviews, updates, and version control processes, • Assist with Learning Management System (LMS) administration (e.g., course setup, user management, reporting), • Help organize and improve learning content structure, tagging, and navigation within the LMS, • Help curate role-based or skill-based learning pathways, • Map learning content to competencies, job roles, or career stages, • Document learning processes, workflows, and best practices, • Coordinate with cross-functional stakeholders (e.g., engineering, manufacturing, HR), • Assist with intake, prioritization, and project tracking for learning requests Basic Qualifications, • Bachelor's degree in Instructional Design, Learning Experience Design, Education, Psychology, Communications, or a related field (or equivalent experience), • Foundational understanding of instructional design principles and adult learning theory, • Strong written and visual communication skills, • Comfort working with digital tools and learning technologies, • Strong organizational skills and attention to detail, • Ability to lawfully access information and technology that is subject to US export controls Preferred Qualifications, • Master's degree in Instructional Design, Learning Experience Design, Education, Learning Sciences, Organizational Psychology, or Industrial / Organizational Psychology, or a related field, • Experience (academic, internship, or project-based) in creating learning content or training materials, • Familiarity with authoring tools (e.g., Articulate, Rise, Captivate, or similar), • Exposure to LMS platforms, • Experience working with subject matter experts, • Interest in technology, engineering, or manufacturing environments Work Environment, • This position is based onsite in our Torrance, CA office, • Hands-on ownership of real learning projects with meaningful impact, • A fast-paced, evolving environment with opportunities to learn quickly, • A mix of creative, analytical, and operational responsibilities across the learning lifecycle, • Collaboration with technical teams and cross-functional stakeholders, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Why Nikon Metrology? You would be joining a global company and becoming part of the future, giving you the opportunity to enter a career where you can help to shape and define innovation. Job Purpose: The Business Development Manager plays a key role in driving growth by leading customer interactions for our industrial X-ray imaging and CT scanning services. This position oversees the full lifecycle of inspection service projects—from first customer contact and proposal creation to project completion and follow-up. The Business Development Manager role is a commission-qualified position offering base pay plus commission. Key Areas of Responsibility: Will include, but not limited to the following: • Develop targeted campaigns to reach existing and new customers in defined geography., • Full owner of revenue growth in defined territory., • Outbound strategic prospecting includes calls, emails, & social media., • Effectively communicate technical information to prospects across multiple industries., • Provide forecasting for the territory as well as identify resources needed to maintain or gain customers., • Voice of customer communications – ensure team knows what to deliver., • Work with Nikon Metrology prospects and customers to evaluate their applications & projects., • Propose scanning solutions to meet customer’s needs., • Respond to all inquiries and customer request in a timely manner., • Become immersed in digital X-ray and CT technology use, trends and applications., • Educate customers & prospects in person and via web meeting about X-ray and CT scanning technology., • Manage and input accurate CRM data in a timely manner., • Other duties as assigned. Ancillary Responsibilities: • Assist in distributing pertinent technical information to sales personnel., • Professionally Represent Nikon at all Times. Qualifications: Essential Required Knowledge, Skills, and Abilities: • A two-year technical degree or bachelor’s degree., • Three years’ experience in technical or industrial sales., • General knowledge of manufacturing processes including but not limited to aerospace, electronics, medical devices, additive manufacturing, automotive manufacturing., • Strong understanding of industrial x-ray & CT imaging systems and components, or other equivalent technical experience., • Ability to effectively communicate with Nikon Metrology employees, customers and members of management in a professional manner., • Ability to provide technical solutions to customers with a high degree of professionalism., • Willing and able to travel up to 20%-25% of the time., • Strong computer skills., • Self-motivated and well organized. Certificates, License, Registrations: • Valid driver’s license and ability to be insured., • Valid passport and ability to travel outside of the United States. Desirable: • Previous industrial X-ray / CT experience., • Previous entrepreneurial experience., • Aerospace industry experience. Functional Competencies: • Ability to observe, monitor, collect and record data., • Ability to manage people and multiple projects in a fast-paced environment., • Ability to review data and identify trends and draw conclusions., • Ability to communicate effectively as an individual and within a team. Direct Reports: N/A Budget Responsibility: N/A Direct Reports: N/A Budget Responsibility: N/A Working Environment/Physical Requirements: • Flexible travel availability on short notice, • 20-25% domestic and international travel required., • Occasional weekend and evening work, as needed. How We Take Care of Our Team Culture Spirit • Work as a Team, Act as a Family! We believe in bringing our team members together in a diverse and friendly company atmosphere to celebrate and socialize to inspire each other and keep our community strong and close inside and out of the office. Work Life Balance • We understand the hustle and bustle of everyday life and the importance of work life balance, which is why we offer in office and hybrid working dynamics + refresh days! Personal Development • We want you to grow with us and be the best version of yourself, which is why we offer competitive compensation, training/advancement opportunities and tuition reimbursement. Amazing Medical Benefits & Perks • We’ll take care of you with industry leading medical, dental, vision plans and many more benefits that allow us and you to continue to be AMAZING! As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or national origin or because he or she is an individual with a disability or disabled veteran, Armed Forces service medal veteran, recently separated veteran, or active duty wartime or campaign badge veteran, or therein after referred collectively as “protected veterans”.

Job Description WHY WORK FOR US? We are mission and values driven and your contributions will make a difference. We make a positive difference in people's lives and help an average of 23 people per week to find a place to live. If you join us, you will be able to advocate for change while also working with influential people who effect changes in policy and devote time to issues of racial and social justice. We prioritize your work/life balance and provide various scheduling options in addition to generous time off, health, and wellness benefits and we're committed to helping you reach your potential by providing opportunities for professional growth across the state. JR 5403 Substance Abuse Specialist Los Angeles, CA 90004 Salary: $24.78 - $30.20 per hour plus $2.41/hr pay differential Pay Frequency: 24 Pay Periods Per Year Full Time Monday thru Friday 3:00AM to 11:30AM Non-Exempt Driving Required Lower end of range will apply to candidates who meet minimum experience or have limited years of relevant experience. The higher end of range will apply to seasoned candidates with considerable years of relevant experience. PATH is seeking candidates passionate about helping others make a positive change in their lives to join our Metro Rail Outreach Services team as the Substance Abuse Specialist at the Union Station location. ABOUT PATH Since its foundation in 1984, PATH (People Assisting The Homeless) has pioneered bold and effective approaches to assist people experiencing homelessness. PATH operates services throughout California, connecting our clients to a comprehensive continuum of homelessness prevention, street outreach, employment preparation and placement assistance, individualized case management, supportive services, interim housing, and permanent supportive housing. ABOUT OUR TEAM We believe our mission to end homelessness can be achieved by providing permanent housing and highly individualized supportive services. Every program in our growing range of services is designed to holistically address barriers to long-term housing stability, implementing evidenced-based practices to promote improved wellbeing beyond housing alone. We are committed to improving the quality of our services by creating a diverse work environment for the community at large. ABOUT THE JOB As part of the Metro Rail Outreach team the Substance Abuse Specialist will participate in daily street outreach to homeless clients on the MTA (Metro) system in the metropolitan Los Angeles region. Using the PATH Street Outreach Integrated Care approach, the Substance Abuse Specialist will provide outreach and engagement services to conduct interventions to quickly assess and link clients to long-term housing, health, mental health and other supportive services. The Substance Abuse Specialist may attend community meetings and develop relationships with local businesses, organizations, and service providers. Substance Abuse Specialist will refer clients for necessary services and offer transportation assistance. Position Responsibilities include: • Conduct nightly outreach at Metro stations, bus stops, and aboard trains to develop relationships and build rapport with clients in order to assist them with finding a home., • Conduct VI-SPDAT (Vulnerability Index- Service Prioritization Decision Assistance Tool) assessments for all new clients in order to connect them to proper intervention and services and document results in the HMIS., • Conduct substance abuse assessments and provide referrals as necessary., • Provide street-based case management services that are designed to prepare and connect homeless clients to long-term supportive services and achieve their goals including: Assistance with the establishment of personal benefits including (GR, SSI, TANF, Veterans Pension, etc.). Assistance with obtaining various forms of identification, including birth certificates and social security cards. Provision of employment assistance, housing referrals, and health related assistance, as identified on the ISP. Assistance with applications for supportive and subsidized housing and prospect potential locations for affordable rental housing. Provision of and/or assistance with connection and access to any other services that assist with improving quality of life, such as mental and physical health services., • Meet with established clients on a regular basis to review, evaluate, and support goal completion., • Respond within specific contract timeframes to requests for street outreach services and send follow-up information to the requestor and the supervisor., • Collaborate with community substance abuse and mental health providers to ensure seamless referral services., • Work with local law enforcement and interim service providers to ensure a smooth transition from street living to interim housing., • Provide ongoing information, referrals, linkages, and advocacy for all other identified needs., • Creatively use and develop community resources to broker and link clients to services., • Provide a high-quality customer service environment for all clients., • Participate in staff meetings and training as assigned by the supervisor., • Complete all necessary paperwork to track client progress (daily logs, ISP, etc.)., • Maintain documentation standards as set forth by the program contract and PATH policies., • Complete paperwork on each face to face and telephone contact with the client, or with any collateral contact, by close-of-business on the next working day., • Ensure all program data is accurate and entered into the appropriate program documentation system as required contractually (i.e. HMIS, internal spreadsheet, CES, etc.), • Prepare case-related reports, including but not limited to, demographics, outcomes, successes and challenges., • Generate client data for reporting., • Analytical Skills and Attention to Detail: Gather and interpret data, identifying trends, patterns, and insights to inform decision-making. Ability to consistently produce high-quality work, ensuring accuracy and precision in all tasks., • Collaboration and Teamwork: Work effectively with others, seeking out and building positive working relationships with colleagues, participants, and stakeholders. Work effectively with others, contributing to team goals and recognizing the strengths and contributions of others., • Communication: Convey information clearly and effectively (both verbally and in writing) to individuals and groups in a manner that informs, engages and maintains their attention., • Creativity and Initiative: Take action and make decisions without being prompted, demonstrating a proactive approach to work and a willingness to take on additional responsibilities. Think outside the box, generating innovative solutions to problems or challenges., • Critical Thinking and Problem Solving: Analyze and evaluate information and situations, identify key issues, consider alternatives, and make logical decisions based on sound reasoning that will achieve the desired outcome., • Bachelor's Degree in a related field., • Have employment eligibility verification, • Have or be able and willing to obtain CPR/First Aid training, • Successfully complete the following as a condition of hire:, • Tuberculosis Test, • Background Screening, • Have reliable transportation, • A valid driver's license, • Proof of insurance and ownership for personal vehicles used during work duties PATH is committed to maintaining the highest standards of professionalism and objectivity in our services and employment practices. To avoid potential conflicts of interest and ensure the integrity of our programs, we are unable to employ individuals who are currently receiving services from PATH or have received services within the past two years. CALIFORNIA-BASED WORK EXPECTATIONS We are a California employer. Therefore, all regular and customary work must be performed within the state. Approval for work outside of the office, does not establish approval for work to be conducted outside of California. PATH does not offer fully remote positions. While some roles may include a schedule that involves multiple designated worksites or approved off-site locations (e.g., hybrid schedules), this does not imply that work will be performed from home. Many positions are fully on-site with no off-site work. All work schedules are determined by the responsibilities of the role and operational requirements, and may be adjusted at any time. WHAT WE OFFER In addition to a rewarding work environment, we offer our employees a competitive benefits package that includes medical, dental and vision coverage, vacation and sick time, paid holidays, and a retirement plan. READY TO MAKE A DIFFERENCE THROUGH ACTION? If this position sounds like a fit, please submit your application today. A resume is required. PATH provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, PATH complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. PATH will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. PATH is dedicated to racial and social justice by centering equity in our service delivery and maintaining a diverse and inclusive work environment for the communities we serve. We seek awareness and insight from witnessing the stories of our clients and learning from the experiences of our staff to ensure impactful systems change. If people are empowered, they can bring their authentic, whole selves to work and when people feel like they belong, they can become part of a unified effort of ending homelessness for all.

Job Description SUMMARY: We are seeking an experienced VTL Machinist for our 1st shift based in Brea, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Maintain and Realize AS 9100 procedures and continuous improvement efforts., • Maintain a clean and organized work environment., • Keep the CNC clean and general maintenance up to date., • Keep machine fixtures clean and stored properly., • Work with Management to prioritize machine schedule., • Work with programmers in order to minimize set-up and manufacture time., • Order cutters and tooling as required to support manufacturing., • Operate the CNC., • Report to Management recommendations and / or concerns that will affect quality or time management., • Must understand how customer products are impacted in the event of failure., • Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management., • Must have experience with Siemens 840D and Fanuc 31i – B5 Controls., • Must have excellent blueprint interpretation skills., • Must have thorough understanding of machine set-ups, tooling, and cutters., • Must have direct communication with internal customers., • Must be trained of applicable changes & customer requirements., • High school graduate or equivalent work experience., • Adequate years of operating CNC equipment determined by Karman.PHYSICAL REQUIREMENTS, • Constant standing/walking/sitting for at least 8 hours., • Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs., • Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment., • Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement., • Prolonged periods of repetitive movement are required., • Constant holding, grasping, turning, or otherwise working with the hand(s)., • Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. ITAR REQUIREMENTS • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. WORK ENVIRONMENT • This position operates in a warehouse/shop/manufacturing environment. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. Monday- Friday 4:30pm- 3:15am

Job Description SUMMARY: This person is primarily responsible for executing, verifying and implementing contractual, engineering and business planning requirements in accordance with customer requirements and company QMS. They utilize statistical thinking and methodologies to identify opportunities, plan improvements, execute those plans, and then follow up to ensure business results have been statistically improved and sustained, especially with regard to meeting customer expectations. They are in-house consultants to all departments to facilitate and lead improvement activities. They support engineering efforts that relate to quality improvement. ABOUT US: Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* ESSENTIAL DUTIES & RESPONSIBLITIES • Jr. Quality Engineer supporting Aerospace programs ensuring the build, assembly, and test of all hardware meet quality requirements., • Review and approval of Drawing Changes Task, Test Procedure reviews, manufacturing work instructions reviews and PO instructions to External Providers., • Responsible for ensuring all engineering requirements are met prior to performing Product Acceptance., • Responsible for generating and maintaining FAI reports for complete product including fabricating applicable required mechanical and physical test reports., • Collaborate with engineering and manufacturing functions to ensure quality standards are in place., • Support constraint reviews for manufacturing operations and applicable test protocols, assuring all constraints are captured and communicated in a professional timely manner., • May analyze inspection and testing processes, mechanisms and equipment; conducts quality control tests., • Provide Frequent Activity Reports to Management, highlighting critical activities and major occurrences., • Engages in product failure investigations, material review board decisions and corrective/preventive action., • Work may include support of Quality metrics generation KNOWLEDGE AND SKILL REQUIREMENTS: • Bachelor’s degree in engineering or equivalent specialized experience., • 2+ years’ experience with Quality Assurance programs in a corporate environment preferred., • Must be detail orientated, extremely organized; possess excellent communication skills and be able to interact well with all levels of Staff and Management., • Must have working knowledge of ISO9001:2000 and AS9100(Current Revision), • Must have working knowledge of Customer and Supplier audits., • Must be familiar with Customer specifications and processes., • Must have direct communication with internal customers., • Must be able to conduct formal training of changes & customer requirements., • Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: • Four (4) year degree or equivalent in work experience., • Adequate years of experience in Quality Control / Assurance in a manufacturing environment and or training in a related field determined by Karman, • Adequate years of experience implementing and or managing ISO Quality systems determined by Karman. WORK ENVIRONMENT: • This position operates in a professional office environment., • This position routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. TRAVEL REQUIREMENTS: • No travel is required for this position. LICENSING & CERTIFICATION • Quality/statistical related certifications advantageous (ASQ, Six Sigma, Lean)., • Professional auditing experience preferable. Quality certification, or RAB certification, preferred ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. Monday - Friday: 7am to 4pm | Saturdays as needed

Job DescriptionSalary: $22 per hour Lead BHT Location: Palos Verdes Estates, California Position Type: Part-Time, In-Person, Hourly Wednesday through Sunday Build Your Expertise. Guide Recovery. Join a Mission That Matters. At Throttle & Thrive, we provide focused, trauma-informed care to First Responders and Veterans in our inpatient detox and residential treatment program. Were looking for a dedicated and driven Lead BHTto take the lead in daily operations including managing the BHTs, compliance, facilities maintenance and more. If youre passionate about recovery, not afraid of hard work, and thrive in a fast-paced, high-intensity and purpose-filled environmentthis is the role for you. Your Role at a Glance: • Manage and train the Behavioral Health Technicians, • Oversee all compliance and regulatory items to ensure the standards are met, • Ensuring the facility runs on time for all program items., • Document all necessary items in Kipu, • Other duties include: medication pass, taking vitals, CIWAS/COWS, computer work, group notes documentation, group facilitation, transportation, food ordering and food management, facility maintenance, vehicle inspections and more., • You need to have a good understanding of how to use a computer and various software systems (Microsoft Office, Email and various online platforms), • Complete all related documentation in Kipu EMR, onsite and within required timelines, • Respond to clinical crises and client needs with professionalism and therapeutic integrity, • Collaborate with a tight-knit, multidisciplinary team, including medical staff and clinical leadership, to support client progress Why This Opportunity Stands Out: This is a rare opportunity to grow in a deeply rewardingrole thats both hands-on and mission-driven. Youll be helping our staff provide the best care to First Responders and Veterans. What You Bring to the Table: Youre someone who shows up with heart, structure, and a strong work ethic. Youre confident in your technical skillsor eager to develop themand ready to contribute to a fast-paced environment with high standards and a high level of support. Were looking for someone who: • Holds active RADT or CADC, • Has prior BHT and Management experience, ideally in a residential or substance use treatment setting, • Is skilled at balancing clinical care, documentation, and teamwork, • Feels comfortable managing others, overseeing vehicle maintenance, • Understands the unique experiences and emotional needs of First Responders and Veterans, • Has strong communication, time management, and problem-solving skills, • Brings a positive, collaborative attitudeand isnt afraid of working hard Ready to Join the Team? Submit your resume to: Youll work hardbut youll be supported every step of the way. Apply today to start making a real differencefor your clients and your career.

Job Description The Staff Attorney provides consultation & professional representation at hearings or courts on issues such as protection orders, family law, immigration, housing/tenancy, public benefits, education and employment; provides legal training and Know Your Rights Workshops to staff and clients. SJCH serves largely disenfranchised communities – individuals and families living in poverty: immigrants (both documented and undocumented); Black, Latinx, Indigenous, and other People of Color; LGBTQ+; victims of human trafficking and domestic violence; individuals and families affected by the criminal justice system; and disenfranchised youth. Staff Attorneys are hired to provide legal representation to patients served under various grant funded programs, and are expected to hold specific and general expertise in one or more areas of civil law, or in assisting patients with the lingering effects of involvement with the criminal justice system during and post incarceration. BENEFITS: • Free Medical, Dental & Vision, • 13 Paid Holidays + PTO, • 403 (B) retirement match, • Life Insurance, EAP, • Tuition Reimbursement, • Flexible Spending Account, • Continued workforce development & training Performs a combination, but not necessarily all, of the following duties • Provide counsel, advice and representation to veterans at risk of homelessness., • Work with social service teams to provide comprehensive care to clients of the LSP., • Assist veterans by representing them in discharge upgrades, removal of license suspensions, or any other factors making them at risk of homelessness., • Assist clients with legal service needs related to parentage, dissolution, child or spousal support, or any factor in family law setting impacting their risk of homelessness., • Assist clients in pro per or represent, as appropriate., • Assist clients with employment or housing issues making them at risk for homelessness., • Assist with the development of an outreach plan to the St. John’s patient community, government organizations, non-government organizations and surrounding communities regarding the services offered by St. John’s., • Extended networking with NGO’s for the purposes of establishing MOU’s and long term relationships., • Draft forms, briefs and prepare filings as needed., • Attend meetings of various St. John’s partners and advocacy organizations., • Attend meetings, trainings, and other work-related events as needed., • As an exempt position, evening and/or weekend hours may be required to ensure the fulfillment of all duties and responsibilities., • Work evenings at least twice a month for the LSP free legal clinics;, • Work closely with support staff to streamline administrative processes and enhance overall client support., • Prepare reporting measures on a regular schedule including but not limited to building out the case management systems that track such data., • Conduct local area travel for outreach purposes, connecting with the community and ensuring that individuals are aware of available legal services., • Provide Legal Services education to SJCH clinic staff and program staff., • Track time and grant related activities as required by grant or position., • Given capacity limits, also provide legal services to patients of St John’s not qualified for grant services., • Juris Doctor (JD) from an accredited law school., • Admission to the California State Bar and be in good standing., • Fluency in Spanish is ideal, but not essential., • Strong knowledge of trauma-informed care to address the unique needs of the vulnerable population served., • A mixed focus on housing, family law, and/or civil matters as well as administrative matters related to licensing issues affecting ability to work or qualify for work opportunities., • Strong interpersonal and communication skills: Ability to engage with diverse community members and convey complex legal concepts in an understandable manner., • Commitment to public interest law: Passion for serving vulnerable populations and promoting social justice., • Strong organizational skills with the ability to handle multiple tasks and prioritize effectively., • Excellent communication and interpersonal skills, with the ability to work with individuals from diverse backgrounds and cultures., • Empathy and compassion for individuals facing legal challenges and a commitment to providing high-quality services., • Flexibility to travel to various outreach locations and work occasional evenings or weekends is required., • Proficiency in legal research, document preparation, and case management software is necessary., • Knowledge of community resources and experience in community outreach is beneficial.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Divergent aims to revolutionize industrial manufacturing in the aerospace and defense industries through our DAPS (Divergent Adaptive Production System) technology. Our patented production system incorporates Nodes™ – 3D-printed metal connectors – with lightweight materials to create strong and efficient complex structures. Divergent's technology eliminates tooling and drives radical innovation, capital reduction, and sustainability in vehicle manufacturing. Divergent is seeking a skilled and motivated engineer to support the next generation of industry-leading aerospace vehicle development. We're committed to transforming vehicles' structural systems away from traditional manufacturing by using new materials and new technologies. To do this, we need a forward-looking and innovative engineer who will help shape the future of automotive structures. Structures Engineer will be responsible for the product development through entire product life cycle, from program kick-off to start of production. In this role, you will create and manage CAD models, FEA models and BOM's for individual Nodes™ as well as full structures. You will develop and maintain engineering documentation, including system level DFMEA and DVP and collaborate with cross-functional teams to understand manufacturing/design capabilities and limitations and to ensure proposed design changes can be efficiently produced and assembled. As DAPS Product Engineer, you will also act as technical liaison between Divergent and its customers, to ensure product requirements are concurred, tracked and achieved. The Role • Create and manage CAD designs of the components, as well as the BOM structure., • Build up and analyze FE Models of Node™-based vehicle structures applications including validation using hand calculations and optimization., • Present design summary/reports efficiently at meetings and to other relevant engineers or external parties., • Create, refine, and execute new technical solutions for automotive structures to support external customer programs and joint development efforts., • Work collaboratively in a team environment within the DAPS Product Engineering team and cross-functionally with other disciplines to efficiently design and release structures that are optimized for mass, efficient production, and assembly., • Work cross-functionally to implement cost reduction, methods and product improvements, and support prototype and production build activities., • Maintain technical documentation, including best practices and lesson learned., • Support vehicle builds and product development testing and troubleshooting.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • BS or MS in Mechanical Engineering or equivalent., • Experience in structure design., • CAD experience creating detailed models. Siemens NX is a plus., • PLM experience. Teamcenter is a plus., • Experience in structural analysis., • Experience in analysis software packages such as Nastran, Optistruct, and/or LS-Dyna., • Solid understanding of linear/nonlinear behaviors of advanced materials (composites, adhesives, metals) to achieve lightweight structural solutions., • Experience with aerospace load applications and MIL-STDs., • Outstanding comprehension of solid mechanics., • Solid interpersonal skills and motivated self-starter who can manage personal workload and execution to tight schedule.Preferred Qualifications, • Experience interfacing with engineering, testing, and manufacturing groups to understand system designs and the associated constraints., • Experience with DFMEA, DVP, control plans, PPAP and APQP., • Knowledge of overall vehicle systems/sub-systems and requirements., • Experience supporting analysis and completing documentations for product approval and launch., • Experience supporting structural design and analysis throughout the design, build, and test phases of a development cycle., • Experience with fast iteration prototyping programs., • Experiencing with managing system configurations and managing changes to size, weight, and cost constraints., • Supported or engaged directly with DoD airworthiness stakeholders such as Air Force Test Center (AFTC) or FAA.Work Environment, • Work is performed in an office environment and requires the ability to operate standard office equipment and keyboards. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels E03 - E07 as evaluated through our interview process. • Engineer / E03: $100,980 - $138,820, • Engineer / E04: $116,600 - $160,325, • Senior Engineer / E05: $134,640 - $185,130, • Lead Engineer / E06: $155,540 - 213,840, • Principal Engineer / E07: $179,630 - 247,005 Pay Range$100,980—$247,005 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose As an Oracle Fusion Solution Architect, you will be responsible for designing, implementing, and overseeing the technical aspects of the Oracle Fusion Cloud applications, with a specific focus on the Finance business capability. You will collaborate closely with stakeholders from the business, IT peers, internal and external functional consultants, and developers, to ensure the successful delivery of Oracle Fusion Cloud solutions that enable our business requirements. Your expertise will be critical in guiding the technical design, development, and integration of Oracle Fusion Cloud applications to achieve optimal performance and scalability. The Role • Lead the technical design and architecture of Oracle Fusion Cloud solutions withing the Finance business, • Collaborate with business stakeholders and functional consultants to understand business requirements and translate them into technical designs, • Provide guidance and expertise on the configuration, customization, and extension of Oracle Fusion Cloud applications to meet specific user needs, • Configure, test, and deploy Oracle Cloud Financials modules, supporting all phases of the project lifecycle, • Guide business process optimization and transformation in the context of Oracle Cloud, • Develop solution blueprints, process flows, gap analysis, and technical documentation, • Conduct technical feasibility assessments and provide recommendations for system enhancements, upgrades, and migrations, • Collaborate with development, integration, and security teams to ensure adherence to architectural designs and standards during the development lifecycle, • Troubleshoot complex technical issues related to Oracle Fusion Cloud applications and provide timely resolutions, • Stay up to date with the latest Oracle Fusion Cloud releases, features, and industry trends to provide proactive recommendations and enhancements, • Support cutover, UAT, and production deployment, ensuring business readinessBasic Qualifications, • Ability to lawfully access information and technology that is subject to US export control, • 15+ years in Oracle ERP experience with 7+ years in Finance, • Expertise and consulting field experience across several Oracle Fusion Financial modules, such as:, • General Ledger, • Payables/Receivables/Fixed Assets, • Cash Management & Expenses, • Tax Automation & Configuration, • Financial Reporting (SmartView, Financial Reporting Studio, Fusion Analytics Warehouse), • Accounting Hub and Subledger Integrations, • Demonstrated ability to design scalable, future-ready Oracle Cloud ERP Financials solutions aligned to industry and Oracle leading practices, • Proficiency with relevant Oracle utilities, tools and middleware, • Excellent communication, documentation, and client management skills, • Comfortable working in the defense industryPreferred Qualifications, • Bachelor's degree, • Oracle certifications in Oracle Fusion Cloud technologies, • Experience with Oracle Fusion Cloud implementation methodologies, such as Oracle Unified Method (OUM) or Oracle Application Implementation Methodology (AIM), • Background in aerospace, automotive, defense, or manufacturing industries, • Familiarity with other enterprise systems including MES, PLMWork Environment, • Onsite Pay Range$127,260—$209,070 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionSalary: $18-$20 per hour DOE POSITION TITLE: Bilingual Job Developer (Spanish) CLASSIFICATION: Non-Exempt REPORTS TO: Employment Services Director SALARY RANGE: $18.00 - $20.00 per hour SUMMARY The Job Developer is under the direction and supervision of the Program Manager and is responsible for the development of and placement in employment opportunities for DCRC members. ESSENTIAL FUNCTIONS Responsibilities: Conduct an initial intake and employment assessment with each new member referred from the Department of Rehabilitation (DOR). Develop employment goals with the member based on the members skills, interests, income requirements, city of residence and other relevant factors. Provide employment preparation to members, both individually and in groups, on the topics of: Interviewing Techniques Resume Development Application Preparation Appropriate Work Behaviors Grooming and Hygiene Provide job development services to members. This includes direct contact with employers to develop job leads. Maintain ongoing file of employer contacts and activities. Provide job placement services to a member that includes short-term follow-up services up to 90 days after employment. Assist employers and members with barriers to job retention. Participate in job development activities coordinated by the DOR (Diversity Employment Source, Jobs in Motion, etc.). Provide a weekly Job Club for members receiving services. Prepare required reports for submission to the Department of Rehabilitation. QUALIFICATIONS Experience in job development and working with persons with disabilities (physical, neurodivergent/mental health, intellectual and/or developmental). Familiarity with employment related issues facing people with disabilities including accommodations and adaptive equipment/assistive technology. Knowledge of Equal Employment Opportunity (EEO) requirements and accessibility standards for people with disabilities in the workplace required. Demonstrated experience in all facets of employment including resume preparation, interviewing, business expectations, and major job categories. Demonstrated ability to do employer outreach. Demonstrated interpersonal skills needed to interact effectively with a variety of staff, volunteers and members of the community. Demonstrated ability to communicate effectively (oral/written). Demonstrated ability in basic computer literacy. Must be able to travel as required. Bilingual skills (Spanish or American Sign Language) required. PREFERRED QUALIFICATIONS Life experience with disability as well as knowledge of the Independent Living Movement philosophy preferred. Experience in Domestic violence/ Sexual assault preferred. POSITION TYPE/HOURS OF WORK This is a full-time position that reports to the Program Manager. The Job Developer is expected to work the typical work week at DCRC- 40 hours a week with an unpaid hour reserved for lunch. EEO/AAP STATEMENT The Disability Community Resource Centeran equal opportunity employer committed to a professional, non-discriminatory, and non-retaliatory workplace. In compliance with federal and California law, we do not discriminate based on race (including hair texture/protective hairstyles), color, religion, creed, national origin, ancestry, disability, medical condition, genetic information, marital status, reproductive health decisions, sex, gender (identity/expression), sexual orientation, age, or veteran status. The Disability Community Resource Center is committed to taking affirmative action to employ qualified individuals with disabilities and protected veterans. Personnel actionshiring, promotion, training, compensationare administered without regard to these statuses, and employees are protected from retaliation for filing complaints or assisting in investigations. DISCLAIMER This job description is not intended to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other activities, duties and/or responsibilities may change or be assigned.

Job Description SUMMARY: The Machine Maintenance Technician maintains production and quality by ensuring operation of machinery and mechanical equipment. Responsible for day-to-day service, diagnostics, maintenance, repair and movement of company-owned machines. Reports to the Maintenance Manager. ABOUT US: Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. Compensation & Benefits • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Ensures operation of mechanical/electro-mechanical equipment, machinery, material processing & cutting machines, basic pneumatic tools/lines, • Assesses and completes diagnostics and preventive maintenance, • Oversees new installations, movement of machines, calibration, set up and leveling, • Coordinates services with outside vendors as needed, • Responsible for tracking, scheduling and documenting all preventative maintenance in accordance with company policy, • Performs other duties as assigned WHAT WE ARE LOOKING FOR • Required Education: High School Diploma, • Preferred Experience: 5+ years installing, maintaining and/or repairing a variety of machinery, • Strong diagnostic troubleshooting and repair skills, • Knowledge of associated tools and test equipment, • Proficient at reading and following diagrams, manufacturer’s instructions and engineering specifications, • Excellent verbal and written communication skills, strong time management skills, • Basic computer skills (Microsoft Office and Outlook a plus), • This position requires the use of stairs, and occasionally lifting objects up to 50lbs, • Must be a U.S. Citizen PHYSICAL REQUIREMENTS This position requires the use of stairs, and occasionally lifting objects up to 95 lbs ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. 2nd shift

Job Description Inside Sales Representative Quinn Company, your local Caterpillar dealer City of Industry, California $70,000 – $90,000 (Hourly Rate + Commission) Are you a driven, customer‐focused sales professional who thrives in a fast‐paced environment? Do you enjoy working closely with service teams, providing accurate quotations, and supporting customers through exceptional communication and follow‐through? Quinn Company — one of the top‐performing Caterpillar dealers in the world — is hiring an Inside Sales Representative in City of Industry, California. In this role, you will sell Caterpillar parts, service, and insurance products while building strong customer relationships, generating service leads, and contributing to overall business performance and customer satisfaction. Founded in 1919, Quinn Company sells, services, and rents a full line of construction, agricultural, and material‐handling equipment, as well as diesel and natural gas engines. As a Caterpillar dealer, Quinn blends entrepreneurial agility with the global support of a Fortune 50 company. This position offers an hourly rate plus commission, with total annual compensation ranging from $70,000 to $90,000. The Quinn Advantage: Your Total Rewards Compensation & Financial Future • Competitive hourly pay + commission, • Quinn’s Profit Sharing Program, • Medical, Dental, and Vision Plans, • Health & Dependent Care Flexible Spending Accounts, • Holidays, Vacation Pay, and Sick Pay, • Life & Accident Insurance, • Cross‐divisional advancement opportunities, • Employee recognition programs Join Quinn Company and help deliver the exceptional support our customers rely on. Your Mission, Should You Choose to Accept It: • Collaborate With Service Teams: Work closely with supervisors, technicians, and coordinators to identify requirements, promote upsell opportunities, and schedule repairs and PMs., • Prepare Accurate Quotations: Review service reports and photographs to create detailed and accurate quotes; conduct job walks; coordinate quotes through internal or external vendors., • Influence Customer Decisions: Promote recommended repairs, service needs, and CSA inspection findings to support customer equipment reliability., • Upsell Electrical/Engineering Services: Recommend Advanced Electrical Services and bundled solutions within CSA contracts., • Pursue Business Opportunities: Seek private and government bid opportunities; identify leads using new customer reports, warranty expirations, PIP/Safety letters, CSA data, and product population reports., • Resolve Customer Issues: Investigate customer concerns assigned by management and support timely resolution., • Act as a Service Liaison: Facilitate communication between customers, technicians, service supervisors, and sales representatives., • Ensure Accurate Quoting: Work with technical quoters, management, and company experts to confirm all materials, labor, and support requirements., • Build Internal Relationships: Maintain positive, accountable working relationships with sales, service, parts, engineering, vendors, and internal departments., • Minimum 2 years of related experience and training, or equivalent combination of education and experience, • Knowledge of Caterpillar or competitor products in the commercial engine market, • Ability to learn and perform dealer operations using DBS, TMI, CWS, SalesLink, and IMACS, • Strong PC skills in Word, Access, Excel, PowerPoint, Adobe, and internet applications, • Strong communication, organization, customer service, and follow‐through skills, • High school diploma or equivalent required (technical trade certification or degree preferred), • Valid California driver’s license in good standing, • Highly motivated self‐starter with strong planning and delegation abilities APPLY LINK: Quinn is an Equal Opportunity Employer M/F/V/DV Quinn Group, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, national origin, physical or mental disability, all applicable veteran status or disabled veteran status. Quinn Group, Inc. has established an Affirmative Action Plan to promote the employment and advancement of members of those covered groups identified by statute and regulations, including minorities, women, qualified disabled individuals and all Veterans and disabled Veterans. #LI-Onsite Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description Systems & Network Administrator Location: City of Industry, CA Work Schedule: On-site, 5 days a week Travel: Approximately 40% Salary Range: $105,000 – $115,000 Who is Quinn? Quinn Company is an authorized Caterpillar dealership founded in 1919. We sell, service, and rent a full line of new and used construction, agricultural, and material handling equipment, as well as diesel and natural gas engines. As a Caterpillar dealership, Quinn Company offers the agility and entrepreneurial spirit of a local company while leveraging the global strength and resources of a Fortune 50 organization. We proudly rank among the top-performing Caterpillar dealers worldwide — a testament to our competitive, performance-driven culture. About the Role Are you an IT professional ready to ensure peak performance, security, and reliability across a growing enterprise network? This role goes beyond technical support — it’s an opportunity to drive the success of our infrastructure. We’re seeking a Systems & Network Administrator to oversee servers, network hardware, and connectivity solutions while ensuring optimal uptime, security, and scalability. If you thrive on problem-solving, innovation, and hands-on technical work, we want to meet you. Key Responsibilities • Deploy, configure, and maintain Cisco LAN/Wireless and VeloCloud SD-WAN technologies., • Manage Fortinet and Palo Alto firewalls for secure, high-performance network operations., • Design, implement, and monitor SSL and IPSEC VPN connections., • Manage network equipment firmware, updates, and upgrades., • Troubleshoot complex network and server issues to minimize downtime., • Implement and maintain security measures to protect sensitive data and network integrity., • Perform production operations including log reviews, backups, and system maintenance., • Maintain configuration management and software version control., • Design advanced network solutions, including segmentation and infrastructure planning., • Participate in the Change Management Board to ensure standardization and compliance., • Document operational procedures, best practices, and network architecture., • Collaborate with IT Management, Development teams, and vendors to resolve critical issues., • Lead network-related projects across local and remote data center environments., • Conduct system audits and recommend upgrades to support business needs., • Develop, implement, and test disaster recovery procedures., • Participate in a rotating on-call schedule to ensure system availability., • Support business applications by monitoring error logs and coordinating with third-party providers. What You Bring • Hands-on experience with Cisco Catalyst and Nexus route/switch configuration and management., • Proficiency with Cisco Meraki wireless and firewall solutions., • Deep knowledge of TCP/IP networking, DNS, DHCP, LDAP, Active Directory, and related technologies., • Excellent troubleshooting, documentation, communication, and project management skills., • Proactive, detail-oriented, and able to work both independently and collaboratively. Education & Experience • Bachelor’s degree in Computer Science or related field and 5+ years of experience administering networks and servers (50+ servers), or, • Associate degree/certification in Computer Systems and 8+ years of professional IT experience. Preferred Certifications • CCNA / CCNP, • VMware SD-WAN Foundations, • MCSE (Windows Server) APPLY LINK: Benefits • Medical, Dental, and Vision Plans, • Vacation and Sick Pay, • Quinn’s Profit Sharing Program, • 401(k) Plan, • Health & Dependent Care Flexible Spending Accounts, • Federal Credit Union, • Life & Accident Insurance, • Long-Term Disability Insurance, • Employee Assistance Programs, • Company-Supplied Uniforms, • Wellness Programs, • Advanced Technical Training, • Employee Recognition Programs Quinn Group, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, national origin, physical or mental disability, all applicable veteran status or disabled veteran status. Quinn Group, Inc. has established an Affirmative Action Plan to promote the employment and advancement of members of those covered groups identified by statute and regulations, including minorities, women, qualified disabled individuals and all Veterans and disabled Veterans #LI-Onsite Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact: The Quality Specialist plays a vital role in ensuring that the manufactured products meet customer and industry standards. This position involves managing certifications, resolving quality issues, and maintaining documentation in compliance with AS9100 and ISO9001 standards. The role requires strong attention to detail, analytical skills, and effective collaboration with cross-departmental teams to uphold quality standards. What you’ll be doing as a Quality Specialist: • Working a full-time, onsite position at our Chatsworth, CA location., • Maintain the inspection stamp log, including assignment tracking and conducting annual audits., • Manage vendor, material, and hardware certifications, configuring them into Certificates of Conformance., • Handle AS9102 First Article Inspection Reports using CAD Software such as SolidWorks or similar tools., • Understand and interpret blueprints, GD&T, and customer specifications to determine product requirements., • Resolve non-conformance issues by collaborating with planning and other departments to determine next steps., • Process and document Return Merchandise Authorizations (RMA), including investigation, disposition, rework, and reshipment., • Ensure timely follow-up and resolution of open non-conformances, customer complaints, and RMAs in Quality Management System or similar systems., • Generate and maintain quality documentation packages, including inspection records and certifications., • Retrieve, review, and organize process and inspection documents for quality compliance., • Ensure accuracy and currency of all documentation, including engineering revisions., • Provide parts and documentation for source inspections as required., • Assist with the upkeep of cleanliness and organization in compliance with 6S principles., • Collaborate with cross-functional teams to delegate and oversee rework processes., • Perform data entry, research processes, and find job locations in MRP/ERP systems., • High School Diploma or GED., • Advanced computer skills, including Microsoft Office (Word, Excel, Outlook, and SharePoint)., • Familiarity with MRP/ERP systems (e.g., JobBoss, GlobalShop, etc.)., • Knowledge of blueprint reading, shop math, and GD&T., • Basic knowledge and familiarity with customer purchase orders., • Strong attention to detail and analytical abilities., • Proven ability to handle and prioritize multiple tasks in a fast-paced environment., • Industry experience in aerospace manufacturing., • Familiarity with AS9102 First Article Inspection Report processes., • Experience using Blueprint Reading Software such as Q-Pulse, DISCUS or similar., • Knowledge of CNC machining and manufacturing processes., • Experience with customer interactions., • Understanding of inspection techniques and certification codes., • Medical, dental, and vision insurance coverage., • Choice of medical plan options, including a no-cost employee-only coverage plan, • HSA-eligible health plan with employer contributions, • Basic and supplemental life insurance, • Long-term disability coverage, • 401(k) plan with up to a 6% QACA company match, • Paid time off including vacation, sick time, and nine (9) paid company holidays, • Shift differentials for applicable off-shifts Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including sexual orientation and gender identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or those requiring a reasonable accommodation to participate in the application or interview process, should contact the RTCA Human Resources Department. Qualified individuals with disabilities or disabled veterans who are unable or limited in their ability to access or use our career center due to a disability may request a reasonable accommodation by contacting Human Resources. Candidates will receive consideration without discrimination in accordance with Article 9, Chapter XVIII of the City of Los Angeles Municipal Code and applicable federal, state, and local laws.

Job Description THE BASICS • Role Summary: This role partners directly with Sales Consultants to source, sell, and deliver custom products to clients worldwide. The ideal candidate is confident collaborating with the marketing and creative teams of high-profile clients, providing ideas, feedback, and recommendations. Strong project management skills are essential to manage multiple projects, meet tight deadlines, maintain client relationships, and keep production teams on track. This role involves brainstorming, ordering, and shipping projects, with a strong attention to detail and a high level of professionalism when handling time-sensitive information. The ideal candidate is proactive in improving processes, exploring new tools, and supporting team collaboration, with the flexibility to work across and adapt to multiple teams as needed., • Location: In-office at our Encino, CA location - 16133 Ventura Boulevard, Encino, CA 91436., • Compensation: $26-$33 per hour depending on experience level WHAT YOU'LL DO: • Handle all orders from order placement until the product is in the client's hands. This includes but is not limited to, verifying pricing, following up with manufacturers, and tracking orders through delivery., • Under the direction of the Sales Consultant, place and follow up on sample orders, project specifications, and client requests., • Assist Sales Consultants as needed and provide self-directed, backup client contact when Sales Consultant is out of the office or unavailable., • Work directly with Sales Consultants, internal e-commerce team, Clients, and Vendors to ensure proper creation of websites, ongoing customer service, and inventory management., • Manage inventory by ensuring quantities on hand are accurate, setting up “triggers” to identify products with low stock, and working with Sales Consultants for approval on product reorders., • Constantly monitor product sales and inventory numbers, analyze trends and draw conclusions to determine product reorders, best-selling categories, determine invoicing on purchases and warehousing fees, and other actions by running and analyzing month-end reports., • Develop materials such as sales letters, PowerPoint presentations, and Microsoft Word proposals for presentation to clients., • Drive product research., • Maintain great customer service and pleasant communication with all new and existing clients., • Manage fulfillment projects as needed., • Coordinate with corporate staff (Billing, Accounts Receivable, Accounts Payable, etc.) on client accounts (invoices, aging, etc), billing, and technical issues and confirm Client expectations are being met., • Deliver professional, friendly, and timely service to Clients and their employees, addressing any issues and providing problem resolution. WHAT WE'RE LOOKING FOR: • Proven ability to work independently in a fast-paced environment ., • Ability to think critically and demonstrate a self-starter attitude., • Strong project management experience, along with ability to manage multiple tasks while adhering to strict deadlines., • Superior customer service skills., • Must be highly detail-oriented and very organized with the ability to adapt to a changing environment while following tasks through to completion., • Reliable, positive, and professional attitude., • Proactive with a team-player outlook., • An outgoing, friendly, and approachable personality., • Excellent phone skills with strong email and writing etiquette., • Proficient with Microsoft Word, Excel, and PowerPoint., • Skills in Adobe Photoshop and Illustrator a plus. Nadel is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at . By submitting your application, you acknowledge and confirm that you have received, read and understand Nadel’s Applicant Privacy Notice and hereby authorize and consent to the Company's use of the personal information and sensitive personal information it collects, receives or maintains for the business purposes identified in disclosure. Powered by JazzHR zEsSox9Whr

Job DescriptionCertified Payroll Specialist Location: Pasadena, CA Pay Rate: $33-37/hour, based on experience Employment Type: Contract-to-Hire Schedule: Monday-Friday | 7:00 AM-4:00 PM or 8:00 AM-5:00 PM We are looking for a detail-driven Certified Payroll Specialist to support construction-related certified payroll operations. This role plays a key part in ensuring payroll accuracy, compliance, and timely reporting while partnering with internal teams, contractors, and subcontractors. Primary Responsibilities • Process weekly certified payroll for employees, including uploads, validations, and report distribution, • Review and process subcontractor certified payroll submissions for compliance and completeness, • Maintain organized certified payroll records and project documentation, • Serve as a primary contact for certified payroll inquiries from prime contractors and subcontractors, • Monitor and manage incoming emails related to contracts, payroll reporting, and project details, • Track and update project information using Excel spreadsheets, • Assist with certified payroll project start-up documentation and onboarding, • Support preparation of union reports, status letters, and compliance-related documentation, • Provide backup assistance for certified payroll reporting and distribution as needed, • Perform general administrative tasks such as filing, copying, and record management, • Complete additional duties as assigned by the Certified Payroll ManagerQualifications & Experience, • Minimum of 2+ years of union payroll experience (construction payroll experience preferred), • Prior certified payroll experience strongly preferred but not required, • At least 2 years of high-volume data entry experience with a strong emphasis on accuracy, • Advanced proficiency in Microsoft Excel and working knowledge of Microsoft Word, • Strong 10-key skills with demonstrated accuracy, • Proven customer service skills with professional and courteous communication, • Ability to manage multiple priorities with overlapping deadlines, • Comfortable working in a fast-paced, deadline-driven environment, • Excellent verbal, written, and interpersonal communication skills, • Strong ability to learn new systems and adapt quickly, • Willingness to work overtime or weekends as business needs requirePreferred Systems Experience, • Familiarity with LCP Tracker and DIR reportingPay Details: $33.00 to $37.00 per hour Search managed by: Allison Lau Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionWe’re looking for a detail-oriented Quality Inspector to ensure our aerospace components meet strict quality and regulatory standards. This role performs visual and dimensional inspections, documents findings, and supports continuous improvement efforts. -Perform visual and dimensional inspections for receiving, in-process, first article (AS9102), and final checks -Use precision tools such as micrometers, calipers, and gauges -Maintain accurate inspection records, reports, and documentation -Ensure compliance with AS9100, FAA requirements, and internal quality systems -Identify defects, document non-conformities, and support corrective actions -Assist with continuous improvement initiatives -Help train new inspectors and warehouse staff on quality procedures -Follow all safety protocols and operational standards -Support warehouse tasks including inventory, receiving, and occasional lifting up to 25 lbs GREAT benefits, friendly team environment Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: The pay transparency policy is available here: For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. AppleOne participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #1005 Company DescriptionThis company offers growth and a great group of people to work with.This company offers growth and a great group of people to work with.

Job DescriptionDescription: As part of the JVS So Cal Veterans Service Team, the SSVF Case Manager will be part of a dedicated, specialized, and passionate team focused on improving the lives of veterans experiencing homelessness. Utilizing a client-driven approach, the SSVF Case Manager leverages their experience, drive, and training to provide housing relocation and stabilization services. The SSVF Case Manager connects clients with services, provides problem-solving support, and helps clients develop the skills necessary to live independently. SSVF Case Manager will support Veterans through Los Angeles County, focusing on assisting Veterans and their families in securing and retaining housing and linking clients to community resources and other service providers. Requirements: • BA or BS degree in Social Work, Career Counseling, or other related fields (may be substituted for experience)., • Four years of case management or housing navigation experience may be substituted for the educational requirementMust have a passion for working and connecting with Veterans., • A vital customer service and counseling expertise to multi-task is required., • Must have excellent communication skills., • Timeliness and attention to detail are essential., • Must take the initiative; must think outside the box and simultaneously be able to work as part of a team towards unit goals., • Three or more years of experience working with priority populations., • A background, experience in Case Management and/or Career Counseling, prior military experience, and experience in homeless services is preferred., • Proficient in Microsoft Office products, including Outlook, Word, Excel, and PowerPoint., • Be assertive, friendly, and willing to work flexible hours to meet objectives and goals., • A valid Driver’s License is required. KEY RESPONSIBILITIES • Through formal and informal assessment strategies, evaluate homeless veterans and families’ housing barriers and other social determinant needs., • Provide comprehensive case management services and support to homeless veterans., • Assists veterans in articulating housing goals and developing an action plan to secure or retain housing., • Assist veterans in building social skills to enhance safe and affordable housing acquisition and retention., • Identify, create linkages to, advocate for, and coordinate services for veterans., • Responsible for timely and accurate data collection and reporting into HMIS. Ensures that all work assigned is completed professionally and timely with high levels of data integrity., • Determine veterans’ eligibility for VA HUD VASH/SSVF, DMH, CoC, and other housing programs., • Assess veterans’ and families’ housing needs and preferences and assist in the search for appropriate housing, including filling out rental applications, interpreting leases, and understanding tenant rights and responsibilities., • Assist veterans and families in obtaining decent and affordable housing in the most integrated, independent, and least intrusive or restrictive environment by taking them out to view housing., • Monitor and evaluate veterans’ progress, maintaining records in HMIS and other applicable program databases and paper records by adhering to program data collection and reporting requirements., • Maintain compliance with agency and funder protocols and procedures and maintain confidentiality in accordance with Health Insurance Portability and Accountability Act (HIPAA) standards., • Maintain compliance with funder and company Waste, Fraud, and Abuse policy., • Performs all other duties assigned as needed for the efficient operation of the program., • Responsible for meeting individual performance goals. PHYSICAL DEMANDS Will work in an office environment and travel to community partners and housing sites. Must be able to lift 15 lbs. with a fair amount of sitting, answering telephone calls, and movement within the office. May be required to work some evenings and an occasional weekend day. Must be able to operate standard office equipment. ABOUT JVS SOCAL Founded in 1931, JVS-SoCal is a nonprofit, non-sectarian social service agency providing job training, education, career services, mentoring, and placement assistance to diverse and multicultural populations, transforming lives and empowering individuals to achieve sustainable employment and financial independence. JVS SoCal currently serves over 30,000 clients annually at over 20 locations throughout Southern California. As JVS SoCal continues to grow, we continue to look for qualified, dedicated staff to join us and play a role in transforming lives and bettering our communities throughout SoCal and beyond! Salary $25.00- 26.00 / per hour JVS SoCal will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if JVS SoCal is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating or rehabilitative evidence, or challenge the accuracy of the background check report. Find out more about the Fair Chance Act by visiting .

Job Description HII is seeking a detail-oriented QA Admin Specialist to support our Quality Assurance team. This role involves assisting with inspections, documenting non-conformances, tracking corrective actions, and performing administrative and data-related tasks. The ideal candidate is organized, reliable, and comfortable collaborating across production, engineering, and customer support functions. Key Responsibilities • Assist with quality inspections, document and track non-conformances, and support resolution with production/engineering teams., • Perform data entry, collect and analyze quality data, and prepare reports for management review., • Generate and review work orders, test records, logs, 1st Article Reports (AS9102), and rejection reports for electronic record purposes., • Support QA Management with interdepartmental communication, training coordination, and customer support., • Reliable self-starter with strong attention to detail, accuracy, and quality., • Strong organizational, teamwork, and verbal/written communication skills., • Able to handle multiple tasks and responsibilities simultaneously., • 3–5 years of relevant experience in QA tasks and customer support functions., • Health insurance (Dental, Vision, & Life Insurance), • 401(k) About HII: HII headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors worldwide. Focused on defense and commercial technology, the Company develops manufactures and supports a broad range of systems for over one hundred industries as well as mission critical and military sustainment requirements worldwide. We are extremely proud of the fact that our extensive design capabilities enable us to produce the most sophisticated units known to today's technology. Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet. Our manufacturing facility is equipped with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices. HII has combined the greatest talent, skill, and equipment to best service our customers' demands. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination and harassment against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability (including physical, emotional, and mental health), or status as a protected veteran. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact (818) 998-1231x2200 for assistance.

Job DescriptionCompany Description International SOS Government Services is seeking an experienced Ultrasound Technologist to support Veterans through high-quality diagnostic imaging at the VA Long Beach Healthcare System. This mission-driven role is ideal for a skilled sonographer who values accuracy, patient care, and working in a collaborative federal healthcare environment. Location: VA Long Beach Healthcare System — Long Beach, CA Why Join Us Join International SOS Government Services and use your sonography expertise to support Veterans in a structured, mission-focused healthcare setting. Full-time roles may include medical, dental, vision, basic life insurance, 401(k), paid time off, and annual bonus eligibility. About International SOS Government Services International SOS Government Services supports government, defense, civil agency, and contractor missions by delivering healthcare staffing and medical support in mission-driven environments worldwide. Job Description Position Overview The Ultrasound Technologist, also classified as a Medical Instrument Technician, independently performs complex diagnostic ultrasound examinations, prepares and positions patients, captures and documents images, and supports radiology operations in accordance with VALBHS policies, procedures, and medical staff protocols. Key Responsibilities • Prepare patients for ultrasound procedures, explain exams, obtain relevant medical history, and position patients safely and comfortably., • Operate ultrasound equipment independently to perform complex diagnostic exams and capture high-quality images., • Select technical parameters, apply coupling gel, maneuver transducers, and adjust accessory equipment as needed., • Document, label, archive, and send images to PACS; complete post-processing, case editing, and required reporting., • Enter and maintain patient information in Radiology Vista, CPRS, and related systems., • Set up exam rooms, verify supplies and equipment, and maintain a clean, organized work area., • Collaborate with radiologists, physicians, and interdisciplinary healthcare team members to support accurate diagnosis., • Follow VALBHS policies, OSHA guidelines, health and safety requirements, and required compliance training., • Maintain professional appearance, computer proficiency, and readiness to support additional related duties as assigned.Qualifications Requirements & Qualifications • Minimum of two years of current work experience in medical sonography., • Associate’s degree in diagnostic medical sonography or related field, or bachelor’s degree in diagnostic medical sonography., • American Heart Association Basic Life Support certification., • Must meet Medical Instrument Technician requirements and VALBHS credentialing and privileging standards., • Proficiency with Radiology Vista, CPRS, imaging technology, and general office systems., • Ability to read, write, and speak English effectively., • U.S. Citizen or Permanent Resident Card holder required., • Must pass or possess VA Public Trust Clearance., • Must meet pre-assignment medical exam, immunization, OSHA, and onboarding/compliance requirements., • ARDMS certification preferred but not required., • PACS experience preferred; AGFA PACS training may be provided., • VA, federal healthcare, hospital, or radiology service experience helpful. Additional Information SEO Keywords Ultrasound Technologist, Ultrasound Technician, Diagnostic Medical Sonographer, Sonographer, Ultrasound Tech, ARDMS, Medical Instrument Technician, MIT, Radiology Technologist, VA Sonographer, Long Beach CA Ultrasound Jobs, PACS, AGFA PACS, CPRS, Radiology Vista, BLS, Diagnostic Imaging, Federal Healthcare Jobs. Privacy Disclaimer: Policy Link By clicking “I’m Interested” and submitting your application, you acknowledge that you have read and understood the applicable Privacy Policy (available via the link above) and agree that International SOS Government Medical Services, may collect, use, store, transfer, and otherwise process your personal information in accordance with that Privacy Policy for recruitment and hiring purposes. Compensation Disclaimer: Pay range is based on several factors and may vary in addition to a full range of medical, financial, and/or other benefits. Final salary and offer will be determined by the applicant’s background, experience, skills, internal equity, and alignment with geographical market data. Benefits Language (FTE roles): Full-time positions are eligible for our comprehensive and competitive benefits package including medical, dental, vision, and basic life insurance. Additional benefits include a 401k plan, paid time off, and an annual bonus. International SOS Government Medical Services complies with all federal, state, and local minimum wage laws. Equal Opportunity Employer (EEO) Statement: International SOS Government Medical Services is an equal opportunity employer and does not discriminate against employees or job applicants on the basis of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws.

Job Description Overview Want to Join the Best in Pest? Go Pro with Orkin. As an Orkin Pro, you’ll put the "pro” in protecting what businesses value most. You’ll have more than a job—you’ll have a career with growth potential and benefits that go beyond the basics. This includes a company vehicle, competitive pay and a 401(k) program. Not to mention, you’ll receive opportunities to volunteer and give back. You’ll join a team backed by more than 120 years of delivering top-notch service, and you’ll be a key player in maintaining our reputation as the best in pests. With Orkin’s award-winning training program, you’ll receive all the tools you need to succeed. That means no industry experience required to start building your career as an Orkin Pro. Plus, if there’s one thing we know at Orkin, it’s that pests keep coming back, and that makes our industry recession resistant. Ready to start a career with staying power? Apply now! Responsibilities The Orkin Pro commits to safely and professionally providing the highest level of protection and service to their customers on a designated service route. Their career starts with in-depth, award-winning training that prepares them with the skills needed to succeed in the responsibility of daily route operations, scheduling, issue diagnosis and treatment planning. With each customer, Orkin Pros work to understand problems and do the right thing to resolve them. You will... • Complete our award-winning training to learn the skills and knowledge required to serve our customers, • Prioritize safety in all responsibilities, • Follow a route schedule and daily operation schedule within an assigned territory and ensure timely and safe arrival at each customer’s location, • Operate a company vehicle safely and ensure cleanliness of the vehicle and equipment, • Conduct yourself with the utmost professionalism and integrity with customers and coworkers, • Serve as a problem solver for each customer with empathy by listening to and understanding their needs and utilizing Orkin Pro expertise to recommend the most efficient and innovative solution, • Meet with customers in their businesses or homes to explain actions taken, ensure satisfaction, and discuss additional services that would give them peace of mind about their pest management, • Inspect the interior and exterior of the customer’s property—don’t worry, we teach you how!, • Communicate with customers to explain actions taken, ensure satisfaction, and discuss additional services that would give them peace of mind about their pest management program, • Complete all required service-related documentation in a handheld device provided for speed and accuracy We Offer... • Competitive earnings starting at $20.00 to $31.25 per hour, including a company vehicle with gas card upon route assignment, • Extensive paid training up front and on an ongoing basis to support continuous improvement; no prior pest control experience is required, • Career opportunities to grow and advance in the company and improve compensation, • Competitive pay with commission opportunity, • Company vehicle and gas card, • Comprehensive benefits package including medical, dental, vision & life insurance, • 401(k) plan with company match, employee stock purchase program, • Paid vacation, holidays and sick leave, • Employee discounts, tuition reimbursement and dependent scholarship awards Why Orkin? • You are interested in an opportunity with career potential in a reliable, recession-resistant industry, • You have a service-oriented mindset that leads you to build loyalty and trust with customers, • You hold yourself responsible to commitments, • You value being part of a team, • You want to keep learning, improving and developing as a leader, • You want to join a company that supports the community, • You want a career with a purpose at a mission-driven company that values, • Safety, • Professionalism, • Empathy, • Integrity, • Innovation Qualifications Minimum Requirements: • No Experience Required – we’ll train you to be a Pro!, • High School Diploma or equivalent required, • Valid driver’s license required, • Ability to obtain the appropriate pesticide license within the first 90 days of employment (company paid), • Ability to work in the field independently, manage route-based assignments and interact with our great customers inside their businesses and/or homes What will my work environment be like? Candidates must meet physical job requirements and safely perform the job duties with or without accommodations: • Safely use a ladder within the manufacturer's weight capacity, • Occasionally lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, roof tops, etc. including the ability to climb or balance and stoop, kneel, crouch, or crawl., • Wear personal protective equipment (PPE) which sometimes requires an OSHA-compliant respirator, • Willing to work in different types of weather conditions Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier., • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionBenefits: • Company car, • Flexible schedule Schedule 8 Hour shifts: Day Swing Graveyard 6:00 am-2:00 pm 8:00 pm-4:00 pm 9:00 am-5:00 pm 5:00 pm-1:00 am 12:00 pm-8:00 am 1:00 am-9:00 am Responsibilities: • Drive vehicle/ Patrol around community, • Provide exceptional security services to residents., • Maintain a vigilant presence and ensure the safety and well-being of all personnel and property., • Conduct regular patrols and inspections to identify and address any potential security risks., • Respond promptly and effectively to any security incidents or emergencies., • Collaborate with team members to maintain a secure environment. Requirements: • Valid guard card issued by the BSIS., • Exposed permit, • Valid Driver License, • Clean Driving Record, • Strong communication and interpersonal skills., • Excellent problem-solving abilities and attention to detail., • Ability to work independently and as part of a team., • Military veterans are highly encouraged to apply. Weekly Pay* To Apply: If you meet the requirements and are interested in joining our team, please submit Resume. We look forward to reviewing your application and potentially welcoming you to our Elite Asset Protection team.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance General Engineer (Immediate Need) Location: Long Beach, CA Schedule: MondayFriday, Full-Time Salary Range: $100,000 $145,000 annually About the Role We are seeking an experienced General Engineer to support complex healthcarerelated engineering, design, construction, and facilities management projects. This role requires advanced technical expertise, strong project management capabilities, and the ability to provide professional engineering guidance in a highly regulated healthcare environment. Essential Duties & Responsibilities Development & Planning • Determine project requirements, conduct reconnaissance, and prepare engineering designs, specifications, and cost estimates., • Apply broad engineering knowledge to resolve complex technical challenges requiring innovative solutions., • Perform or direct surveys and investigations to establish baseline data for design., • Evaluate design objectives, perform complex calculations, and identify efficient and economical design procedures.Professional Engineering Oversight, • Provide professional engineering advice to peers, subordinates, and nontechnical managers., • Review or direct the review of engineering plans, specifications, and design analyses., • Recommend improvements, direct necessary changes, and support subordinate personnel on highly complex studies., • Provide oversight and/or project management for construction and maintenance activities.Construction, Maintenance & Project Administration, • Perform scheduling, layout, inspection, and surveillance of construction operations, materials, and equipment., • Prepare detailed cost estimates for funding and bid evaluation., • Produce technical reports, correspondence, fact sheets, schedules, and status updates., • Collaborate with contractors to resolve unforeseen issues and latent conditions., • Review and evaluate shop drawings, samples, and material certifications for compliance.InHouse Design & AE (Architect/Engineer) Management, • Develop inhouse designs, drawings, specifications, and cost estimates compliant with building and safety codes., • Establish design criteria for AE firms and prepare scopes of work., • Oversee, review, approve, or reject AE design deliverables., • Direct AE teams in preparing change order documentation., • Ensure adherence to VA and regulatory design and construction standards.Environment of Care & Safety Compliance, • Implement and monitor OSHA Life Safety, environmental, and health procedures., • Report safety hazards, accidents, and injuries., • Manage hazardous materials, SDS documentation, waste management, and fire protection compliance., • Support emergency preparedness and security policy implementation., • Ensure compliance with federal, state, and local environmental regulations.Customer Service, • Provide courteous, respectful, and consistent communication with veterans, visitors, staff, contractors, and stakeholders., • Resolve conflicts constructively and support VA mission objectives.Infection Control, • Follow infection control practices, including hand hygiene, universal precautions, and isolation procedures.ADP Security, • Protect sensitive printed and electronic data in accordance with the Privacy Act of 1974 and VA/VHA policies., • Follow all regulations regarding access to computerized systems and safeguarding access codes.Minimum Qualifications, • Bachelors degree in Engineering from an accredited institution., • Minimum 7 years of General Engineering experience., • Familiarity with Patient-Centered Care Culture in healthcare environments., • Knowledge of healthcare design, fire codes, building codes, barrierfree codes, systems, components, ergonomics, and safety criteria., • Ability to read, interpret, and review blueprints and specifications., • Strong written and verbal communication skills for interaction with contractors, management, vendors, Contracting Officers, and staff., • Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Access, Outlook)., • Experience with Microsoft Project and Revit beneficial but not required., • Experience with VISTA (Veterans Health Information & Technology Architecture) beneficial but not required.Preferred Qualifications, • Professional Engineer (PE) license strongly preferred.Physical Requirements, • Ability to walk construction sites, climb ladders, and access mechanical spaces., • Ability to lift up to 25 lbs occasionally., • Ability to work in environments with noise, dust, or temperature variations typical of construction and facility operations.Work Environment, • Primarily officebased with frequent onsite inspections in active construction or healthcare facility environments., • May require occasional travel between facilities or project sites.Equal Employment Opportunity We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status, or any other characteristic protected under applicable federal, state, or local law. How to Apply Submit your resume and cover letter detailing your relevant experience and qualifications.

Job Description ABOUT US | HR&A Advisors, Inc. (HR&A) is an employee-owned company advising public, private, non-profit, and philanthropic clients on how to increase opportunity and advance quality of life in cities. We believe in creating vital places, building equitable and resilient communities, and improving people’s lives. From Brooklyn to London, Medellin to Hong Kong, we have guided hundreds of clients in transforming real estate and economic development concepts, and public infrastructure, first into actionable plans and then into job-producing, community-strengthening assets. Our clients include real estate owners and investors, hospitals and universities, cultural institutions and philanthropies, community development organizations, and governments. HR&A has offices in Atlanta, Dallas, Los Angeles, New York, Raleigh, and Washington D.C. We come from diverse backgrounds, have a breadth of lived experience, and share a passion for cities. We are former city officials, executive directors, planners, lawyers, architects, and economists. Hear more about the HR&A experience from our staff. Learn more about careers at HR&A on our website here. THE PRACTICE | HR&A’s Inclusive Cities practice leverages our deep understanding of government, knowledge of local and private economic forces, and analytical rigor to promote social and economic justice. Our practice area centers racial equity and economic justice in economic development, policy, and planning. We help our clients identify who will benefit from economic development initiatives and show them how to design and execute more equitable projects, neighborhoods, and cities. By engaging communities and grassroots organizations in meaningful, non-extractive ways, we build new trust and durable partnerships. We launch new programs and community-driven projects to increase awareness and participation in our civic discourse, which is essential to shifting traditional economic development paradigms. Our team emboldens visionary public servants with the tools they need to embed equity into their policy and practice. We serve as a bridge between ideas and implementation, truly changing systems from workforce development to criminal legal system reform, so that lives are changed for the better. THE ROLE | HR&A’s Inclusive Cities Practice is seeking a full-time Analyst to be based in an HR&A office in New York, Los Angeles, the Bay Area, Dallas, Raleigh, Atlanta, or Washington D.C Our analytical staff form the foundation of our team-oriented and collaborative structure and help to drive our data-driven approach to city building. Analysts are early career professionals with 2-4 years of professional experience and draft the substance of our client work products. Depending on the project, Analysts may expect their work to include: * Substantial public policy research and analysis * Strategic communications, including developing press releases, memos, talking points, and messaging frameworks for policy initiatives * Organizational and governance strategy development for local government agencies * Power mapping and political landscape analysis, identifying key decision-makers, interest groups, and influencers who shape policy and program implementation inside and outside of government. * Municipal budget analysis and evaluation * Community and stakeholder engagement; including designing and facilitating engagement events * Case study research Analysts also help prepare written reports, presentations in PowerPoint, and Excel models for clients, as well as firm marketing materials and proposals for new projects. EXPERIENCE REQUIRED | We are looking for candidates with strong quantitative and qualitative analytical skills, a passion for urban policy and governance, and a deep curiosity about the challenges and opportunities facing cities today. Ideal Analysts will bring a demonstrated capacity for active project team participation, leadership, critical thinking, creativity, and other capabilities aligned with the roles and responsibilities described above, including: * 2-4 years of professional experience in public policy research and analysis, economic development, governance, community engagement, or a related field—ideally in a government, nonprofit, or advocacy setting. * Commitment to advancing equity, with an understanding of how policy, governance, and economic systems impact historically marginalized communities and a desire to develop solutions that promote racial and economic justice. * Understanding of urban systems and policy frameworks, with experience in areas such as city governance, economic inclusion, workforce development, public services, housing, small business support, or civic engagement. * Strong research, analysis, and problem-solving skills, including quantitative and qualitative approaches, policy evaluation, and stakeholder engagement. * Excellent written and verbal communication, with the ability to synthesize complex ideas for policymakers, advocates, and community stakeholders. * Proficiency in common AI tools (i.e., LLMs like ChatGPT) and understanding of best practices for responsible use, citation and incorporation into research and other tasks * Understanding of limitations of AI tools and demonstrated ability to independently verify data and AI outputs * Demonstrated interest in using emerging AI tools to accelerate data analysis, deliverable production and other specialized methodologies * Ability to manage multiple projects in a fast-paced, team-oriented environment. * Bachelor’s degree in Public Policy, Urban Planning, Economics, Political Science, or a related field or a Master’s degree (MPA, MBA, Urban Planning, etc.) or related field. HYBRID WORK POLICY | HR&A fosters a collaborative and flexible work environment through our hybrid work policy. Employees work from the office at least three days a week, which allows individuals the freedom to balance their professional and personal lives while maintaining a strong connection to their teams. COMPENSATION | The base salary range for this position is $83,200 - $95,700 plus the opportunity for a discretionary year-end bonus. Where an offer falls inside this pay range is dependent on experience. We offer competitive compensation packages, based on qualifications and experience. We are an employee-owned company, meaning you will have the opportunity to benefit from the firm’s growth over time through participation in our Employee Stock Ownership Plan. Each year, the firm will contribute funds to this long-term wealth-building account and may make contributions to other retirement accounts. We also provide a comprehensive benefits package that goes well beyond coverage of 90-95% of healthcare premiums, including dental and vision coverage. HOW TO APPLY | HR&A is committed to attracting and retaining a talented, diverse, competitive team of professionals dedicated to solving the challenges of urban life. Women, people of color, members of the LGBTQ community, individuals with disabilities, and veterans are strongly encouraged to apply. To apply, click here. Please submit your cover letter and your resume as a single PDF document. Applications without this requested cover letter will not be reviewed. As part of our ongoing work to build a hiring system that mitigates bias and is based on candidate merit and performance, we ask that you submit a version of your resume and resume that has your school information removed. Please list your degree, e.g., B.A. Economics; however, remove all references to undergraduate and graduate schools you have attended. All qualified candidates will receive consideration for employment without regard to their race, religion, ancestry, national origin, sex, sexual orientation, gender identity or expression, age, disability, marital status, medical condition, veteran status or any other basis as protected by federal, state, or local law. For more information, please contact us at . Powered by JazzHR TAm8N2k8Xm

Job Description A growing logistics company is seeking an experienced Inventory Staff Accountant to join their accounting team. This role will be responsible for inventory tracking, reconciliations, cost analysis, and supporting month-end close processes in a fast-paced environment. Responsibilities: • Monitor and reconcile inventory balances across multiple locations, • Prepare inventory journal entries and account reconciliations, • Assist with month-end and year-end close related to inventory and cost accounting, • Analyze inventory variances, adjustments, and discrepancies, • Partner with operations and warehouse teams to ensure inventory accuracy, • Support cycle counts and physical inventory processes, • Maintain accurate inventory records within the ERP system, • Assist with reporting and ad hoc financial analysis Qualifications: • Bachelor's degree in Accounting, Finance, or related field preferred, • 2+ years of inventory accounting or cost accounting experience preferred, • Experience within logistics, distribution, manufacturing, or supply chain environments highly preferred, • Strong Excel skills required, • ERP system experience preferred, • Detail-oriented with strong analytical and problem-solving skills Beacon Hill is an equal opportunity employer and individuals with disabilities and/or protected veterans are encouraged to apply. California residents: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. If you would like to complete our voluntary self-identification form, please click here or copy and paste the following link into an open window in your browser: Completion of this form is voluntary and will not affect your opportunity for employment, or the terms or conditions of your employment. This form will be used for reporting purposes only and will be kept separate from all other records. Company Profile: Founded by industry leaders to set a new standard in search, career placement and flexible staffing, we deliver coordinated staffing solutions with unparalleled service, a commitment to project completion and success and a passion for innovation, creativity and continuous improvement. Our niche brands offer a complete suite of staffing services to emerging growth companies and the Fortune 500 across market sectors, career specialties/disciplines and industries. Over time, office locations, specialty practice areas and service offerings will be added to address ever changing constituent needs. Learn more about Beacon Hill and our specialty divisions, Beacon Hill Associates, Beacon Hill Financial, Beacon Hill HR, Beacon Hill Legal, Beacon Hill Life Sciences and Beacon Hill Technologies by visiting . Benefits Information: Beacon Hill offers a robust benefit package including, but not limited to, medical, dental, vision, and federal and state leave programs as required by applicable agency regulations to those that meet eligibility. Upon successfully being hired, details will be provided related to our benefit offerings. We look forward to working with you. Beacon Hill. Employing the Future™

Job Description Overview The Director of Preclinical & Clinical Science is the scientific and medical executive responsible for guiding Critical Innovations' scientific strategy, translational direction, clinical development, and medical oversight across all stages of the product lifecycle. This includes scientific leadership of preclinical research, development of translational and biomarker strategies, design and oversight of clinical studies, and medical contributions to the development of the Company's medical products. As a licensed physician, the Director of Preclinical & Clinical Science manages the Company's medical science, providing clinical justification for development decisions, overseeing medical safety during clinical studies, and ensuring that device usability, human factors considerations, risk management, and product performance align with clinical needs and patient safety requirements. The Director of Preclinical & Clinical Science ensures all scientific, preclinical, translational, and clinical work is aligned with applicable regulatory expectations for pharmaceuticals, medical devices, and combination products. The Director of Preclinical & Clinical Science also serves as Principal Investigator (PI) or as Co-Principal Investigator (Co-PI) for select grants/contracts, providing scientific and medical leadership for externally funded programs, overseeing technical direction, and serving as the scientific and clinical point of contact for sponsoring agencies. This position requires a comprehensive understanding of preclinical research, translational medicine, and early-phase clinical development. The role also requires familiarity with relevant quality and regulatory requirements such as FDA's Quality System Regulation (21 CFR Part 820), cGMP for drug products (21 CFR Parts 210 and 211), combination product regulations (21 CFR Part 4), GLP, GCP, and applicable ISO standards (e.g., ISO 13485). The Director of Preclinical & Clinical Science must be able to work independently while participating in cross-functional leadership and executive decision-making. This position is designated as a full-time on-site role and is expected to be performed primarily at the Company's assigned work location. Any work-from-home, hybrid, telecommuting, or other flexible work arrangement is available only if approved under applicable Company policies and business needs, and may be modified, suspended, or discontinued by the Company at any time, consistent with applicable law. Time at 80% (with benefits) may be considered to accommodate for part-time clinical work. Reports to: CEO Duties and Responsibilities: The responsibilities of the Director of Preclinical & Clinical Science typically include the following. Principal Investigator Responsibilities • Serving as PI or Co-PI for federally funded grants and contracts., • Leading the scientific, technical, and clinical direction of funded programs., • Assisting with the development of proposals, statements of work, technical reports, and milestone deliverables and their oversight., • Representing the Company in communications with sponsoring agencies and funders., • Overseeing and supporting scientific research activities performed by or for Critical Innovations, including preclinical studies, translational research, and biomarker development., • Providing management support to personnel within the Scientific & Clinical department., • Ensuring preclinical research, including benchtop work and animal studies, is aligned with clinical feasibility and regulatory expectations., • Designing, overseeing, and medically guiding early-phase clinical studies., • Assisting with the development of clinical protocols, investigator's brochures, informed consent forms, and clinical sections of regulatory submissions., • Providing medical input for device usability, human factors engineering, training materials, and clinical-use risk assessments., • Ensuring proper oversight of outsourced GCP studies in accordance with regulatory requirements., • Contributing scientific, preclinical, and clinical content to regulatory submissions., • Participating in regulatory meetings as one of the Company's medical and scientific representatives. The Director of Preclinical & Clinical Science should possess the following abilities to support medical technology development through clinical evaluation: • 5+ years of experience in biotech, pharmaceutical, and/or medical device clinical development preferred., • Experience serving as a Principal Investigator (clinical, translational, or grant-funded programs) preferred., • Excellent written and oral communication skills., • Demonstrated creativity to conceptualize scientific hypotheses, clinical strategies, and translational approaches., • Strong clinical judgment and ability to interpret medical and scientific data., • Ability to identify and mitigate product-related clinical and usability risks., • Strong leadership capabilities., • Proficiency in analyzing clinical and preclinical data, • Ability to work cross-functionally with scientific, engineering, manufacturing, and quality/regulatory teams., • Self-motivated with strong time management and organization skills to ensure completion of tasks within strict timelines., • Ability to work independently, prioritize multiple projects, address complex issues, and operate within a fast-paced hands-on environment., • M.D. or D.O. degree required; board certification in a clinically relevant specialty (e.g., Emergency Medicine) preferred. To conform to U.S. Government Department of Defense regulations, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Benefits: • 401(k) Safe Harbor Plan, • Healthcare Insurance: Medical, Dental and Vision, • Other Insurance: Life Insurance and Long-Term Disability (LTD) Insurance, • Time Off: Paid Time Off (PTO), Paid Sick Leave, Paid Holidays, and Paid Bereavement Leave, • Tuition Reimbursement Program, • Performance Bonus, • Incentive Unit Plan, • Flexible Schedule Salary: $200,000 - $260,000 per year Privacy Policy | Critical Innovations

Job DescriptionPosition: Job Cost Accountant (JCA) Reports To: General Manager What does a JCA with Paul Davis do? • Manage all phases of job costing within RMS and QuickBooks Accounting Software, • Manage the daily operations of the franchise as needed when the owner is not available, • Maintain all accounting, computer and financial records for franchise in conjunction with a CPA Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider our JCA position is pivotal to the success of the franchise. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Why The Team Needs You? At Paul Davis, we help homeowners put their lives together after a traumatic event. If you can perform in stressful situations, have excellent communication skills, knowledge of accounting, debits and credits, QuickBooks and would enjoy the reward of working in a fast-paced environment, come join us. Everyone within Paul Davis needs to have a world-class work ethic, serious attention to detail and love to help people. The JCA works with owners and the office staff to ensure that all jobs are costed properly, accurately, and follow the guidelines for Job Cost Accountant. You will be practicing continuous improvement every day as you establish rapport with insurance carriers, customers, vendors, subcontractors, adjusters, agents and fellow team members! Team Compensation and Benefits: • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time., • Paid training, • Health, dental and vision insurance, • Referral program, • Great culture and team dynamic, • Desire to join a world-class team and contribute a positive attitude, • Dedication to customer service, • Organized but flexible. Must be able to prioritize and manage time, • Excellent communication skills, • Fluent in English, • Valid driver's license with a clean record, • Have the ability to work nights/weekends and overtime, if needed, • Public Relations-establish a rapport with insurance carriers, customers, vendors, subcontractors, adjusters, agents and fellow employees, • Focus and dedication to providing excellent customer service., • Assist other team members when needed and foster a positive working relationship with other departments., • Be a great representative of our brand!, • Collecting information-possess strong listening and communication skills, ask questions and monitor various aspects of the business to detect problems, • Manage all phases of job costing, • Manage the daily operations of the franchise as needed when the owner is not available, • Maintain all accounting, computer and financial records, • Request and maintain updated Workplace Safety certificates & insurance coverage for subcontractors We support and hire Veterans and we are an Equal Opportunity Employer!

Job Description Beacon Hill is partnering with a growing healthcare services organization seeking a Revenue Analyst to support billing operations, reimbursement analysis, reporting, and process improvement initiatives. This role works closely with Finance and Operations teams to manage accounts receivable activity, analyze revenue trends, and improve visibility across the revenue cycle. This is a highly analytical role ideal for someone with strong healthcare revenue cycle experience, advanced Excel capabilities, and exposure to reporting tools such as Power BI and SQL. Key Responsibilities • Manage billing, payment posting, reconciliations, and accounts receivable activities across multiple payors and client accounts, • Analyze denials, underpayments, reimbursement trends, and billing discrepancies to identify root causes and recommend solutions, • Support revenue-related reconciliations, adjustments, and write-off analysis in partnership with Finance and Operations, • Build and maintain reporting, dashboards, and financial models to monitor KPIs, billing activity, and reimbursement performance, • Utilize advanced Excel skills to analyze large datasets and support operational and financial decision-making, • Partner cross-functionally on process improvement initiatives, reporting enhancements, and automation projects, • Evaluate financial impact of reimbursement or rate changes and assist with strategic recommendations, • Assist with oversight and coordination of support resources related to billing and collections activities, • Support audit readiness and maintain accuracy across revenue cycle workflows Qualifications • Bachelor's degree in Business, Accounting, Finance, Economics, or related field, • 3+ years of healthcare revenue cycle or related financial analysis experience, • Experience with billing, collections, reconciliations, and reimbursement analysis, • Exposure to multi-site or multi-entity healthcare environments preferred, • Familiarity with revenue recognition concepts and audit support processes, • Experience with ERP systems such as NetSuite preferred Preferred Technical Skills • Advanced Excel skills including large dataset analysis and financial modeling, • Power BI experience including dashboard creation and reporting visualization, • Basic SQL knowledge including joins, filtering, and data grouping, • Strong analytical, organizational, and problem-solving skills, • Ability to manage multiple priorities in a fast-paced environment Additional Details California residents: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. If you would like to complete our voluntary self-identification form, please click here or copy and paste the following link into an open window in your browser: Completion of this form is voluntary and will not affect your opportunity for employment, or the terms or conditions of your employment. This form will be used for reporting purposes only and will be kept separate from all other records. Company Profile: Founded by industry leaders to set a new standard in search, career placement and flexible staffing, we deliver coordinated staffing solutions with unparalleled service, a commitment to project completion and success and a passion for innovation, creativity and continuous improvement. Our niche brands offer a complete suite of staffing services to emerging growth companies and the Fortune 500 across market sectors, career specialties/disciplines and industries. Over time, office locations, specialty practice areas and service offerings will be added to address ever changing constituent needs. Learn more about Beacon Hill and our specialty divisions, Beacon Hill Associates, Beacon Hill Financial, Beacon Hill HR, Beacon Hill Legal, Beacon Hill Life Sciences and Beacon Hill Technologies by visiting . Benefits Information: Beacon Hill offers a robust benefit package including, but not limited to, medical, dental, vision, and federal and state leave programs as required by applicable agency regulations to those that meet eligibility. Upon successfully being hired, details will be provided related to our benefit offerings. We look forward to working with you. Beacon Hill. Employing the Future™

Job Description Rental Branch Manager Quinn Company, Caterpillar Rentals Carson, California $92,659 – $116,130 Are you a leader who thrives on building strong customer relationships, driving business results, and guiding high‐performing teams? Are you ready to take ownership of a branch and lead it to success? Quinn Company — a top-performing Caterpillar dealership founded in 1919 — is hiring a Rental Branch Manager in Carson, California. In this role, you will lead a multi‐functional team, strengthen customer partnerships, and maximize business performance within your branch territory. You’ll be the face of Quinn in your region, driving growth, operational excellence, and continuous improvement. Quinn Company sells, services, and rents a full line of construction, agricultural, and material handling equipment, as well as diesel and natural gas engines. As part of the Caterpillar network, Quinn offers the agility of a local business paired with the global strength of a Fortune 50 company. Starting wage will depend on experience and education. $92,659 – $116,130 The Quinn Advantage: Your Total Rewards Compensation & Financial Future • Competitive Base Salary, • Quinn’s Profit Sharing Program, • Medical, Dental, and Vision Plans, • Health & Dependent Care Flexible Spending Accounts, • Holidays, Vacation Pay, and Sick Pay, • Life & Accident Insurance, • Cross‐divisional career advancement opportunities, • Employee recognition programs Join Quinn Company and take charge of a high‐impact leadership role. Your Mission, Should You Choose to Accept It: • Drive Branch Performance: Lead a multi-functional team to maximize financial results, market share, and customer satisfaction within your branch territory., • Build Strategic Relationships: Develop and maintain strong internal partnerships and high‐level relationships with key customers., • Lead & Inspire: Motivate, develop, and retain a high‐performing team with strong leadership and coaching., • Manage Profitability: Take full responsibility for the branch P&L and business portfolio., • Promote Alignment: Communicate effectively across departments to support strategic and tactical business initiatives., • Stay Connected: Visit customers regularly and travel with sales team members to mentor and support them., • Teach and reinforce “value selling” strategies to both customers and internal teams., • Analyze competitor strengths, weaknesses, opportunities, and threats within the territory., • Identify opportunities for business improvement and lead initiatives to enhance company performance., • Promote and reinforce Quinn’s strategic plan and core values., • Serve as the local company leader for your branch territory., • Identify, coach, and develop high‐potential employees for future growth., • Bachelor’s degree from a four‐year college or university, • Minimum of 5 years of industry experience, or an equivalent combination of education and experience, • Management or supervisory experience required, • Strong leadership, communication, and relationship‐building skills, • Ability to manage financial performance and drive operational excellence APPLY LINK: Quinn is an Equal Opportunity Employer M/F/V/DV Quinn Group, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, national origin, physical or mental disability, all applicable veteran status or disabled veteran status. Quinn Group, Inc. has established an Affirmative Action Plan to promote the employment and advancement of members of those covered groups identified by statute and regulations, including minorities, women, qualified disabled individuals and all Veterans and disabled Veterans #LI-Onsite Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.