Compliance engineer jobs in BradfordCreate job alerts

We are seeking a qualified and experienced F-Gas Air Conditioning Engineer to carry out servicing, maintenance, fault finding, and repair works across a range of systems including Air Source Heat Pumps (ASHP), split air conditioning systems, and commercial HVAC installations within both residential and commercial environments.\n\nThe role requires a proactive and customer-focused engineer capable of delivering high-quality workmanship, ensuring compliance with all relevant regulations, and achieving first-time fix where possible.\n\nWhat We Offer\n\nCompetitive salary (based on experience)\nCompany vehicle, fuel card, and tools\nOngoing training and development (including renewables and ASHP systems)\nOpportunity to work across high-profile commercial and social housing contracts\n24/7 support structure and well-organised operations team\n\nLocation:\nYorkshire & Humberside (with travel across the region)\n\nKey Responsibilities\n\nCarry out planned preventative maintenance (PPM) on:\n\nAir Source Heat Pumps (ASHP)\nSplit, multi-split, and VRF/VRV air conditioning systems\n\nDiagnose faults and undertake reactive maintenance and repairs across domestic and commercial systems\nCommission, test, and inspect systems to ensure optimal performance and energy efficiency\nComplete all relevant service documentation, including digital job sheets, compliance certificates, and asset reports\nIdentify and report remedial works, providing clear technical recommendations and quotations where required\nEnsure all works are carried out in line with:\n\nF-Gas regulations\nHealth & Safety legislation\nCompany procedures and client-specific compliance requirements\n\nMaintain effective communication with clients, tenants, and internal teams, ensuring excellent customer service at all times\nParticipate in out-of-hours call-out rota where required\nSystems & Equipment Experience\n\nAir Source Heat Pumps (ASHP)\nSplit and multi-split air conditioning systems\nVRF/VRV systems (e.g., Daikin, Mitsubishi, Panasonic)\nCommercial HVAC plant and controls\nRefrigeration circuits and associated components\nQualifications & Certification\n\nEssential:\n\nValid F-Gas Category 1 Certification\nNVQ Level 2 or 3 in Air Conditioning & Refrigeration (or equivalent)\nFull UK Driving Licence\nDesirable:\n\nExperience working with ASHP systems (MCS-aligned environments beneficial)\nManufacturer training (e.g., Daikin, Mitsubishi Electric)\nIPAF / PASMA\nHealth & Safety qualifications (e.g., CSCS)\nSkills & Experience\n\nProven experience in servicing and maintaining AC and heat pump systems\nStrong fault-finding and diagnostic ability\nAbility to work independently and manage workload effectively\nExperience working in:\n\nSocial housing\nCommercial buildings (schools, offices, retail)\nResidential properties\n\nStrong understanding of compliance, reporting, and KPI-driven environments\nPersonal Attributes\n\nReliable and punctual with a strong work ethic\nProfessional and customer-focused approach\nCommitted to high standards of workmanship and safety\nFlexible and adaptable to meet client and business needs

More About The Role: Our sites are ever-demanding, complex and in some cases operate 24 hours a day - so it's vital we have a strong Engineering team who ensure our machines work to the best of their ability. So we can continue to provide great products to our customers, whilst still ensuring speediness. As a Multi Skilled Maintenance Engineer, you will play a vital role in ensuring the smooth operation of our Manufacturing site. You will be responsible for the maintenance, repair, and improvement of our machinery and equipment, ensuring minimal downtime and maximum efficiency. This is a hands-on role that requires strong technical skills and the ability to troubleshoot and solve problems quickly. Reporting to the Site Engineering Manager your responsibilities will include: • Conduct routine inspections and preventive maintenance on production equipment, identifying and resolving any potential issues before they cause disruptions, • Respond promptly to machinery breakdowns, diagnose the problem, and perform repairs or coordinate with external specialists when necessary, • Carry out machine adjustments and changeovers to support production line efficiency and minimise downtime, • Monitor and calibrate equipment to ensure accuracy, quality, and safety standards are met, • Collaborate with production teams to identify opportunities for process improvement and provide technical expertise to enhance productivity, • Keep accurate records of maintenance activities, including maintenance schedules, repairs, and spare parts inventory, • Adhere to health and safety guidelines and ensure compliance with company policies and procedures, • Stay updated with industry advancements and new technologies relevant to the role About You: • As well as the ability to work at pace, we're also looking for someone who has:, • Qualifications to NVQ level 3 (or equivalent, ONC mechanical/electrical engineering, BTEC level 3 in mechanical & electrical/electronic engineering), • Strong knowledge of mechanical and electrical systems used in FMCG industry, • Proficient in troubleshooting and repairing industrial machinery, including conveyors, motors, pumps, and packaging equipment, • Proactive approach to maintenance and a commitment to ensuring the highest levels of equipment reliability, • A good understanding of HACCP principles and ideally IEE qualification up to 17th edition wiring regulations would be advantageous, • Excellent communication skills, • Assertiveness with the ability to make decisions on the spot, • A can do attitude and a strong work ethic In return for your hard work we will offer you: • Six weeks holiday (including bank holidays), • 15% discount in our stores available from the day you join us, • Additional 10% discount card for a friend or family member, • Career progression and development opportunities, • Subsidised staff canteen, • Free parking, • Market leading pension and life assurance, • Healthcare/Well-being benefits including Aviva Digital GP, • Morrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more, • Long Service Awards, • Optional Payroll charity donations, • Enhanced Family/maternity/parental leave About The Company: You’ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets. At Myton Food Group, we have a legacy to be proud of. We’re British farming’s biggest single direct customer. We buy from highly valued suppliers. And we’re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more. We really do stand out in the world of food manufacturing. But what we’re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain.

• One half-day early finish each week (usually a Friday), • Cycle to Work Scheme, • Service Award Scheme with increasing annual leave and long service payments, • 33 days annual leave entitlement, inclusive of statutory bank holidays, • Fixed contribution pension scheme, • Group life related benefits, • Employee Assistance Programme access, • Free On-site parking We are seeking a proactive and resilient Health, Safety & Environmental (HSE) Engineer to join our manufacturing team in Bradford. This is a hands-on role for someone who thrives on challenge and wants to make a genuine impact. Our HSE and Quality systems are currently undergoing significant improvement. We are looking for someone with tenacity, practical problem-solving ability, and the confidence to challenge the status quo. The successful candidate will play a key role in bringing structure, accountability, and continuous improvement to our safety and environmental practices. This role would suit someone who enjoys building systems, driving cultural change, and working closely with operational teams to embed strong HSE standards across the organisation. Key Requirements: • Lead the implementation and continuous improvement of health and safety policies, procedures, and systems across the manufacturing site., • Conduct risk assessments, safe systems of work, and method statements., • Investigate accidents, incidents, and near misses, identifying root causes and implementing corrective actions., • Support and drive behavioural safety initiatives to build a proactive safety culture., • Conduct internal HSE audits and site inspections, ensuring compliance with UK legislation., • Ensure compliance with environmental regulations and permits., • Support initiatives to reduce environmental impact including waste management, emissions, and resource use., • Maintain environmental records and reporting requirements., • Help bring structure and organisation to the HSE systems., • Support development and maintenance of management systems aligned with ISO 45001 and ISO 14001 (experience with ISO 9001 is beneficial)., • Maintain documentation, procedures, and records., • Deliver HSE training and toolbox talks across the business., • Work closely with supervisors and managers to improve HSE awareness and accountability., • Act as a visible and approachable HSE presence on the shop floor., • Identify gaps in existing HSE processes and implement practical solutions., • Develop clear action plans and follow through to completion., • Support the wider business in embedding a culture of safety, compliance, and operational excellence. We are looking for someone who is practical, determined, and not afraid to roll up their sleeves, with: • Experience in an HSE role within manufacturing, engineering, or industrial environments., • Strong working knowledge of UK HSE legislation and compliance requirements., • Experience conducting risk assessments and incident investigations., • Excellent organisational and communication skills., • A proactive attitude with the resilience to work through complex or underdeveloped systems., • NEBOSH Certificate or Diploma (or equivalent)., • Experience with ISO 45001 / ISO 14001 management systems., • Experience improving or rebuilding HSE systems in a developing environment., • Internal auditor qualification.

Geo-Environmental Engineer \nLocation: Yorkshire Region (site and office based) \nEmployment Type: Full-time \n \nJob Overview \n \nMy client is seeking a motivated Geo-Environmental Engineer to support and supervise ground investigation projects across sites primarily within the Yorkshire region. The role will involve coordinating site investigations, ensuring high standards of health and safety, and assisting with the collection, management, and reporting of environmental and geotechnical data. The successful candidate will work closely with contractors, project managers, and clients to deliver high-quality ground investigation and environmental assessments. \n \nKey Responsibilities \n \n·Supervise ground investigation works, including drilling, sampling, and in-situ testing. \n·Undertake and oversee geological and soil logging during site investigations. \n·Manage day-to-day site activities, ensuring compliance with health & safety procedures and quality standards. \n·Coordinate sample collection, scheduling, and laboratory testing. \n·Support the preparation of factual ground investigation and geo-environmental reports. \n·Liaise with contractors, project managers, and clients throughout fieldwork. \n·Maintain accurate site records, logs, and field documentation. \n·Assist in delivering projects in line with programme, budget, and technical requirements. \n \nPerson Specification \n \n·Experience in ground investigation and geological/soil logging. \n·Strong communication and organisational skills. \n·Ability to manage fieldwork activities and collaborate effectively with project teams. \n·Full UK driving licence and willingness to work on various sites, primarily across the Yorkshire region. \n·Proactive approach to health, safety, and quality management

Dutton Recruitment (Sheffield Engineering) are currently recruiting:\n\nWe are looking for a Multi Skilled Maintenance Engineer for a permanent position based with our client in Bradford.\n\nImmediate start available (subject to interview process)\n\nA salary of circa £40,000 to £45,000 (depending on experience)\n\nThis will be working a 2-shift pattern:\n\nShift 1: Monday to Thursday 6:30am till 2:00pm & Friday 6:30am till 12:30pm\n\nShift 2: Monday to Thursday 2:00pm till 9:45pm & Friday 12:30pm till 5:30pm\n\nKey Responsibilities:\n\nConduct preventative, reactive, and predictive maintenance on mechanical and electrical systems.\nDiagnose, troubleshoot, and repair machinery, production equipment, and building services.\nInstall, test, and maintain mechanical components, electrical circuits, and control systems.\nWork with production teams to optimise machine performance and reduce downtime.\nEnsure compliance with health and safety regulations and maintain a safe working environment.\nKeep accurate records of all maintenance work using a CMMSSkills\n\nRecognized qualification in Electrical, Mechanical, or Multi-Skilled Engineering.\nStrong fault-finding skills in mechanical, electrical, hydraulics, and pneumatics systems.\nAbility to work independently and collaboratively in a fast-paced manufacturing environment.\nExperience with PLCs, automation systems, and industrial maintenance.\nProactive problem solver with a hands-on approach to maintenance.In the first instance, send CV's to (url removed) or call (phone number removed) (option 1) for Engineering.\n\nDutton Recruitment are working as an Employment Business on behalf of our client

Job Title: Water Hygiene Engineer\n\nLocation: Bradford, West Yorkshire\n\nSalary/Benefits: £26k - £35k + Training & Benefits\n\nA national player within the Water Hygiene / Legionella industry is seeking an experienced Water Hygiene Engineer to cover sites around Yorkshire and the North West of England. Applicants must have a good grasp of industry guidelines (ACOP L8 and HSG 274) and will be able to integrate smoothly into a busy and successful team. You will be carrying out a variety of water hygiene compliance tasks, and smaller legionella risk assessments where required. Due to the locations of work, our client can consider candidates based in the North of England, provided they are happy to travel and have good access to major routes. Salaries on offer are competitive and benefits packages include: company vehicle, overtime opportunities and training.\n\nLocations of work include: Bradford, Leeds, Pudsey, Halifax, Dewsbury, Huddersfield, Wakefield, Barnsley, Castleford, Pontefract, Garforth, Tadcaster, Wetherby, Harrogate, Knaresborough, Keighley, Brighouse, Sheffield, Rotherham, Doncaster, Oldham, Manchester, Rochdale, Bury, Bolton, Accrington, Burnley, Clitheroe, Wilmslow, Wigan, Leigh, Ashton-in-Makerfield.\n\nExperience / Qualifications:\n\n * Experience working as a Water Hygiene Engineer\n\n * Ideally will have some experience with conducting Legionella Risk Assessments\n\n * Will preferrably hold the City and Guilds (WMSoc) in Legionella Risk Assessing\n\n * Fully conversant in ACOP L8 and HSG 274 guidelines\n\n * Flexible to travel in line with company needs\n\n * Good literacy, numeracy and IT skills\n\nThe Role:\n\n * Showerhead descales\n\n * TMV servicing and failsafe checks\n\n * Flushing on little used outlets\n\n * Tank inspections, cleans and disinfections\n\n * Performing legionella risk assessments on smaller, domestic hot and cold water systems\n\n * Routine water sampling and temperature monitoring\n\n * Keeping accurate records of works undertaken\n\n * Producing reports to highlight any found risks and recommendations to rectify\n\n * Working to agreed deadlines and personal targets\n\nAlternative job titles: Environmental Service Technician, Legionella Technician, Legionella Risk Assessor, Water Hygiene Operative, Legionella Consultant.\n\nFuture Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market.\n\nWe would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level.\n\nWe are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills.\n\nFuture Select Copyright 2026

More About The Role\nOur sites are ever-demanding, complex and in some cases operate 24 hours a day - so it's vital we have a strong Engineering team who ensure our machines work to the best of their ability. So we can continue to provide great products to our customers, whilst still ensuring speediness. As a Multi Skilled Maintenance Engineer, you will play a vital role in ensuring the smooth operation of our Manufacturing site. You will be responsible for the maintenance, repair, and improvement of our machinery and equipment, ensuring minimal downtime and maximum efficiency. This is a hands-on role that requires strong technical skills and the ability to troubleshoot and solve problems quickly.\nReporting to the Site Engineering Manager your responsibilities will include:\nConduct routine inspections and preventive maintenance on production equipment, identifying and resolving any potential issues before they cause disruptions\nRespond promptly to machinery breakdowns, diagnose the problem, and perform repairs or coordinate with external specialists when necessary\nCarry out machine adjustments and changeovers to support production line efficiency and minimise downtime\nMonitor and calibrate equipment to ensure accuracy, quality, and safety standards are met\nCollaborate with production teams to identify opportunities for process improvement and provide technical expertise to enhance productivity\nKeep accurate records of maintenance activities, including maintenance schedules, repairs, and spare parts inventory\nAdhere to health and safety guidelines and ensure compliance with company policies and procedures\nStay updated with industry advancements and new technologies relevant to the role\nWhy not take a look around one of our Manufacturing sites? Click here.\n\nAbout You\nAs well as the ability to work at pace, we're also looking for someone who has:\nQualifications to NVQ level 3 (or equivalent, ONC mechanical/electrical engineering, BTEC level 3 in mechanical & electrical/electronic engineering)\nStrong knowledge of mechanical and electrical systems used in FMCG industry\nProficient in troubleshooting and repairing industrial machinery, including conveyors, motors, pumps, and packaging equipment\nProactive approach to maintenance and a commitment to ensuring the highest levels of equipment reliability\nA good understanding of HACCP principles and ideally IEE qualification up to 17th edition wiring regulations would be advantageous\nExcellent communication skills\nAssertiveness with the ability to make decisions on the spot\nA can do attitude and a strong work ethic\nIn return for your hard work we will offer you:\n\nSix weeks holiday (including bank holidays)\n15% discount in our stores available from the day you join us \nAdditional 10% discount card for a friend or family member\nCareer progression and development opportunities\nSubsidised staff canteen \nFree parking\nMarket leading pension and life assurance\nHealthcare/Well-being benefits including Aviva Digital GP\nMorrisons MyPerks with discounts at high street shops, cinemas and gyms, and lots more\nLong Service Awards \nOptional Payroll charity donations \nEnhanced Family/maternity/parental leave\n\nAbout The Company\nYou’ll find a great big welcome here at Myton Food Group - the part of our business that looks after manufacturing, whilst maintaining strong roots within Morrisons Supermarkets.\nAt Myton Food Group, we have a legacy to be proud of. We’re British farming’s biggest single direct customer. We buy from highly valued suppliers. And we’re passionate about the quality of our food. Today, we have 19 manufacturing sites across the UK, where we pack and process fresh meats and fish, savoury and sweet pies, fruit and veg, flower bouquets, bread and lots more.\nWe really do stand out in the world of food manufacturing. But what we’re especially proud of is the way we all get stuck in and work as a team, in partnership across our supply chain. Read more about what we do at our Myton Food Group website

Electrically Biased Maintenance Engineer – Manufacturer – Bradford\nSalary: £55,000 - £60,000 + Overtime (Time & a Half)\nShift: 4 on / 4 off 12 hours, Days and Nights\n\nWe’re looking for a highly skilled Electrically Biased Maintenance Engineer to join a leading manufacturing business in Bradford. This is an excellent opportunity to work on a 4 on/4 off shift pattern, earning a competitive salary with a strong benefits package.\n\nWhat’s on offer:\n\n * \n\n £55,000 per year\n\n * \n\n Overtime at time and a half\n\n * \n\n Good pension scheme\n\n * \n\n Comprehensive benefits package\n\nThe Role:\nAs an Electrically Biased Maintenance Engineer, you’ll take ownership of electrical maintenance across the site, ensuring machinery and equipment are running efficiently. You’ll also support mechanical maintenance tasks, making this a perfect role for a multi-skilled engineer with a strong electrical focus.\n\nKey Responsibilities:\n\n * \n\n Carry out electrical fault finding, repairs, and preventative maintenance\n\n * \n\n Assist with mechanical maintenance when required\n\n * \n\n Ensure compliance with health and safety standards\n\n * \n\n Support continuous improvement initiatives\n\nSkills & Experience Required:\n\n * \n\n Strong electrical maintenance background in a manufacturing environment\n\n * \n\n Ability to fault find across PLCs, drives, motors, and control systems\n\n * \n\n Multi-skilled with some mechanical experience\n\n * \n\n Flexible and willing to work a 4 on/4 off shift pattern\n\nThis is a fantastic opportunity to join a well-established manufacturer with a rewarding shift pattern, strong salary, and excellent benefits.\n\nINDENG

Exciting opportunity to work as an EC&I Engineer for a multi-billion-pound market-leading company, offering a competitive salary of up to £44,900 plus an attractive benefits package, including annual bonus, enhanced pension, private medical insurance, life assurance, cycle scheme, and more. Progression is a genuine opportunity with this company given their ambitious but stable growth and ongoing investment strategy.\n\nAs the EC&I Engineer you will be responsible for supporting reliability and plant integrity across an Upper Tier COMAH site. You will play a key role in ensuring compliance with related regulations, while focusing on continuous improvement, fault finding, and maintaining safe and efficient operations.\n\nResponsibilities\n\nEnsure compliance with safety standards for all systems, supporting plant integrity through inspections, preventative maintenance, and best practice.\nSupport RCA failures, driving corrective and preventative actions, assisting with breakdown response, and helping to deliver sustainable solutions.\nSupport site reliability by identifying and implementing improvement opportunities aligned with maintenance and engineering strategy.\nAssist in managing spares and supply chain to minimise downtime risk and ensure critical equipment availability.\nSupport small-scale CAPEX projects, planning, and coordination with contractors and internal stakeholders.\nUtilise SAP to analyse maintenance data, track asset performance, and contribute to long-term maintenance and reliability planning.Requirements \n\nHold a HNC/HND or Degree in Electrical, EC&I, Controls and Instrumentation, or a related subject (essential).\nPossess a solid understanding of control systems, instrumentation, and electrical systems.\nHave experience with SAP and familiarity with reliability tools such as RCA or FMEA (advantageous).Please apply directly for this EC&I Engineer role or contact Sean Turner for further details regarding this opportunity

Calibration Engineer Location: Bradford, BD4 Hours: Full-time, 40 hours per week (Monday–Friday) Salary: Up to £32,000 Contract Type: Permanent About the Role We are recruiting a hands‑on Calibration Engineer to join a well‑established engineering organisation in Bradford. This is a practical, shop‑floor‑focused role, suited to someone with strong experience calibrating machines and measurement equipment in a manufacturing environment. You will take ownership of on‑site calibration activities, ensuring all machinery, measuring tools and test equipment are accurately calibrated, compliant and fit for purpose. Alongside the practical work, you will support the Quality function by maintaining calibration records and ensuring audit readiness. Key Responsibilities Hands‑On Calibration & Engineering Carry out hands‑on calibration of machines, measuring and test equipment across the production environment Perform on‑time calibration in line with internal schedules and external standards Fault‑find, adjust and verify equipment to ensure accuracy and reliability Measure and record production samples as required Support engineers and production teams with calibration‑related issues Calibration Control & Quality Compliance Maintain and update the site calibration database with accurate records Coordi...

Engineering Team Lead Remember to check your CV before applying Also, ensure you read through all the requirements related to this role. Location: Wakefield, W. Yorkshire Salary: Up to £60,000 + benefits Morson are proud to be partnering with a leading UK food manufacturer to support the build of their new site in Wakefield. We're now looking for a Lead Engineer (Shifts) to join the engineering team, playing a key role in supporting plant reliability, leading shift-based engineering activity and helping shape the site as it ramps up. This is a great opportunity to step into a hands-on leadership role, where you'll not only support day-to-day engineering operations but also have real input into how the site performs longer term. The Role As Lead Engineer, you'll be a key part of the shift team, supporting a group of Multi-Skilled Engineers and ensuring all maintenance activity is delivered safely, efficiently and to a high standard. You'll be responsible for both planned and reactive maintenance, as well as coordinating engineering activity on shift and supporting overall site performance. Key Responsibilities • Lead and support a team of shift-based engineers (typically 4–5 per shift), • Ensure all maintenance activity is completed safely and in line with standards, • Allocate and prioritise tasks to maximise plant reliability and performance, • Support both planned (PPM) and reactive maintenance activities, • Ensure accurate recording of engineering activity via SAP / CMMS systems, • Manage contractor activity on shift, ensuring compliance with site procedures, • Maintain clear communication and handovers between shifts, • Support root cause analysis and continuous improvement activity, • Deputise for the Reliability Manager where required What We're Looking For • Strong engineering background within FMCG or similar fast-paced environments, • Multi-skilled experience (mechanical and electrical), • Previous experience leading or supporting engineering teams on shift, • Recognised engineering qualification (Apprenticeship / HNC / Degree or equivalent) xrnqpay, • Good understanding of health & safety and food safety standards (IOSH desirable), • Experience using CMMS systems (SAP preferred), • Strong problem-solving skills and a proactive approach to maintenance Why Apply • Opportunity to join a new, growing site and play a key role from an early stage, • Hands-on leadership role with real responsibility and visibility across the site, • Chance to influence engineering standards, ways of working and team performance, • Backed by a well-established, stable business with long-term opportunities, • Competitive package including profit share, pension and additional benefits

Company description: At Warburtons, family is at the heart of our business. Five generations'? worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. The information below covers the role requirements, expected candidate experience, and accompanying qualifications. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Job description: Role:Multi-Skilled Engineer Location: Wakefield Shift Pattern: 4 on 4 off | Days and Nights Salary: Circa £57,000 + Annual Profit-Related Bonus Were excited to be recruiting Multi-Skilled Manufacturing Engineers to join our team at Bakery 41, our new Bakery in Wakefield. With brand-new equipment, next-generation automation and plenty of opportunity to shape how things are done, this is a role where you can really make your mark from day one. The Recipe As a Multi-Skilled Manufacturing Engineer at Warburtons, youll work collaboratively with production, safety and hygiene teams on shift, taking pride in how things are done. Youll deliver planned and preventative maintenance while developing reliable, future-proof engineering solutions that help set the standard for the site. The Role Youll be part of our skilled engineering family, working together to spot issues, fix faults and keep our bakery performing at its best. From planned maintenance to hands-on fault-finding, youll work across a wide range of equipment - from bulk handling through to packaging, site services and PLCs helping us do things the Warburtons way. You'll: • Keep our plant running at its best through high-quality preventative maintenance and fast, effective breakdown response, • Drive improvements in asset reliability and performance, reducing losses through RCM and CBM activities, • Use SAP PM effectively to plan, track and improve maintenance activities, • Put safety first, ensuring all engineering work meets Health & Safety legislation, company policies and site standards, • Maintain full compliance with quality and food safety standards, protecting product quality and our reputation, • Champion a proactive engineering continuous improvement culture, improving maintenance activities and standard operating procedures Essential Ingredients, • Electrical and Mechanical engineering experience, • Fault Finding and Route Cause Analysis skills, • Structured and practical engineering training (e.g. apprenticeship/HNC/degree)., • Knowledge and experience of maintenance preferably in an FMCG or manufacturing environment., • H&S knowledge e.g., PUWER, IOSH able to ensure a safe working environment., • A slice of the annual profits (discretionary profit share), • Family time is important to us so as well as your holiday entitlement of 6.6 weeks, we'll give you the opportunity to purchase additional days, • Award winning pension scheme with company contributions up to a maximum of 12%, • Life assurance, • Products you will love along with deals and discounts for you and the family through our Extra Dough website including savings on meals out, holidays, retail and much more!, • Continued investment in your personal development, • Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew!

Flexible working hours, monthly bonuses up to £300, clean, modern & organised facilities, and a 7% combined pension scheme are just a few of the perks that the Facilities Engineer will enjoy whilst working with this impressive, globally operating manufacturing business. Supplying a variety of high-profile industries including Oil & Gas and Automotive, this manufacturing giant employ over 20,000 people globally turn over €5B per year. Because of continued demand of their services and products, they are looking to increase headcount at their Bradford facility by recruiting a Facilities Engineer to their team on a permanent basis. As the company is based in Bradford, the Facilities Engineer will easily be able to commute from surrounding towns & cities including Leeds, Halifax, Huddersfield and Wakefield. Key Responsibilities of the Facilities Engineer will include: Carry out planned preventative maintenance (PPM) and reactive repairs across building services and facilities equipment, responding promptly to faults and emergencies Maintain, repair and replace electrical and basic mechanical systems, ensuring compliance with Health & Safety and site?specific procedures Support facilities projects including equipment replacement, minor installations, workspace moves and small?scale building works Liaise with facilities managers, occupants, contractors and suppliers; coordinate specialist procurement and supervise subcontractors o...

MsE Project Engineer (Electrical Bias) , Baildon We are looking for an experienced MCE Project Engineer to join our team based in Baildon, West Yorkshire. This is a hands-on role for someone with a strong electrical bias, who is equally comfortable overseeing the full lifecycle of MCE project delivery. We operate a lead engineer model, meaning you’ll take ownership of your projects from start to finish, including: * Reviewing and re-evaluating projects against initial estimates prior to commencement * Procuring materials and managing buying processes * Developing and maintaining project programmes * Overseeing site delivery, ensuring quality and efficiency * Managing health C safety compliance * Preparing valuations and managing variations, including pricing * Driving projects through to final account and handover At times, you may also support the estimating function during busy periods, so a commercial awareness and willingness to step in where needed is important. What we’re looking for * Strong electrical background with a solid understanding of full MCE delivery * Proven experience managing projects end-to-end * Commercially aware, with confidence in valuations and variations * Organised, proactive, and comfortable taking ownership * A flexible, team-focused approach; willing to support across the business when required Why join ? facilities management ...

EDSB Compliance Solutions are national providers of Fire & Security, Electrical, Mechanical and Building Services. From Design and Specification through to Installation and Maintenance, our focus is to deliver compliance, alongside an unbeatable level of service. We work nationally across the UK and we pride ourselves on being a flexible, client focused organisation responding quickly and efficiently to our clients needs. Our aim is to work closely with our valued clients to ensure our service delivery is exceptional at all times. We are now looking to recruit Fire Door Joiners throughout the UK, who will be responsible for travelling regionally to a variety to sites to carry out joinery work. This is a field based full time role. Working in line with the current standards, the Engineer will also be expected to build professional relationships with our clients. This role will include but not limited to the items below: -Travelling regionally to a variety of sites. -Carrying out inspection of fire doors at each site in a timely, efficient and cost effective manner. -Using an app on the PDA (tablet) to follow a check list to report on the status of each fire door. -Building professional relationships with all clients. -Maintaining accurate and precise documentation of works compl...

Quality Engineer West Yorkshire £30,000 - £35,000 base salary + 28 days holiday, 4% matched pension The Company We are supporting a multinational special purpose machinery manufacturer with a substantial presence in West Yorkshire. Established over 20 years' ago, the business is trusted by major global manufacturers to provide specialised machinery. With a strong focus on investing in its people, this business supports the next generation of engineers through apprenticeships, ongoing training and multi-skilling opportunities. They are now looking to recruit a Quality Engineer with immediate effect. The Role The role of Quality Engineer will be the first in the expansion of the quality department. Supporting the Quality Manager, you will be involved in all areas of quality and compliance for a manufacturing business. The Quality Engineer will: • Ensure supplier and manufacturing quality and compliance, • Be involved in continuous improvement, customer satisfaction, audit readiness, and developing the integrated management system, • Investigate non-conformance, ensuring corrective and preventative measures, • Conduct 8D investigations and 5 Why root cause analysis To be successful in your application for this Quality En...

Are you an experienced Quality Engineer looking to take ownership of customer quality, drive continuous improvement, and play a pivotal role in a fast-paced manufacturing environment? Do you thrive on structured problem-solving, stakeholder engagement, and ensuring robust quality standards from concept through to production? Make sure to apply with all the requested information, as laid out in the job overview below. DENSO is a $47.2 billion global mobility supplier developing advanced technology and components for nearly every vehicle on the road. At DENSO Marston Ltd in Shipley, West Yorkshire, we design and manufacture high-performance heat exchange units and cooling modules for leading OEMs across off-highway construction, agricultural and engine power markets. Working Hours & Benefits Working Hours: • Monday Thursday: 08:30am 5:00pm, • Friday: 08:30am 1:30pmBenefits include:, • Stakeholder pension scheme (10% employee contribution), • Life assurance (4x salary), • Permanent Health Insurance, • Onsite parking, • Subsidised canteen, • Discounted gym membership, • Discounts across 100s of UK retailers Key Responsibilities • Lead Advanced Product Quality Planning (APQP) activities in line with IATF 16949, • Prepare and submit PPAP documentation, ensuring compliance and timely approvals, • Manage customer complaints and warranty claims as the primary quality contact, • Conduct root cause analysis using tools such as 8D, 5 Why, and Ishikawa, • Implement and verify corrective and preventive actions (CAPA), • Support cross-functional problem-solving and containment activities, • Build and maintain strong customer relationships, including audit support, • Support New Product Introduction (NPI) and Approval to Ship processes, • Analyse quality data using SPC and statistical tools to drive improvement, • Ensure compliance with quality standards and customer-specific requirements, • Liaise with suppliers on quality performance and continuous improvement initiativesWhat Were Looking For, • Minimum 5 years experience xrnqpay as a Quality Engineer within manufacturing (automotive preferred), • Strong working knowledge of IATF 16949 and customer-specific requirements, • Proven experience with APQP and PPAP processes, • Hands-on experience with core quality tools (FMEA, SPC, MSA, Control Plans), • Strong root cause analysis and problem-solving capability, • Experience managing customer quality concerns and reporting (e.g. 8D), • Degree in Engineering or equivalent experience, • Excellent communication and stakeholder management skills

Job Title: Water Hygiene / Remedial EngineerLocation: Leeds, West YorkshireSalary/Benefits: £26k - £39k + Training & Benefits Want to apply Read all the information about this position below, then hit the apply button. We are seeking a multi-skilled Water Hygiene / Remedial Engineer to cover sites across Yorkshire and areas of the North of England. You will be conducting reactive and pre-planned compliance duties, interpreting legionella risk assessments to determine any required remedial works. For easier travel, it would be beneficial to have good access to the M1 and / or M62. Our client is a growing name within the Water Hygiene / Legionella industry, who have a mixed portfolio of clients, including commercial, domestic and public sector. Salaries on offer are competitive and benefits include: company vehicle, overtime, pension scheme and annual leave.Locations of work include: Leeds, Morley, Bradford, Batley, Huddersfield, Halifax, Wakefield, Castleford, Pontefract, Barnsley, Doncaster, Rotherham, Garforth, Wetherby, Selby, Thorne, Goole, Sheffield, Brighouse, Keighley, Harrogate, Knaresborough, York, Skipton, Worksop, Chesterfield, Dronfield, Rochdale, Bury, Manchester, Rochdale, Oldham. Experience / Qualifications:-Hands-on experience working as a Water Hygiene / Remedial Engineer-Will hold the NVQ Level 1 and 2 in Plumbing in addition to the G3 Unvented ticket-It would be advantageous to hold the NVQ Level 3 in Plumbing-Ideally will hold: Confined Spaces and Legionella Awareness training-Strong working knowledge of ACOP L8 and HSG 274 guidelines-Flexible to travel in line with company needs-Good literacy, numeracy and IT skills The Role:-Undertaking a wide range of reactive and PPM compliance duties-Deadleg removals-Flexihose removals-CWST cleans and disinfections-Tank reburbishments, replacements and installations-Pipework adjustments and replacements-Showerhead descales-Liaising with legionella risk assessors to identify required remedial works-Completing regular service reports-Ordering parts and materials as required Alternative job titles: Legionella Plumber, Water Hygiene Engineer, Water Hygiene Operative, Remedial Plumber, Remedial Engineer, Environmental Service Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. xrnqpay Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Mobile Electrical Engineer Is this the next step in your career Find out if you are the right candidate by reading through the complete overview below. Covering Leeds, Bradford, York and surrounding areas Role Purpose: The Mobile Electrical Engineer to carry out PPM and Reactive Activities in a variety of commercial premises, candidates will ideally be located in the required area. Applicants will have Commercial Experience. The applicant would be expected to assist with various reactive and PPM tasks. Some installation work will be expected although the core part of the role is maintenance. The role is predominantly electrical skillset bias of strong multi-skilled background with experience of Building Services. This is a hands-on role and would suit an individual that can work using their own initiative and have a proactive approach to undertake all tasks required. A conscientious and reliable team player and someone that has excellent interpersonal and communication skills due to this being a client facing role. The ability to produce quotes for additional works by obtaining materials costs and writing up a description of the works required. What this job involves: * To carry out reactive maintenance repairs across various buildings. * To assess and order parts and equipment necessary for individual tasks. * To work to recognised industry standards at all times. * To participate in flexible working hours and out-of-hours emergency cover as required by the contract. * To undertake training as required to perform the duties of the role, including health and safety courses and further trade development, to maintain current knowledge and professional qualifications (Continued Professional Development). * To assist other trades as/when required. * To update/close completed Reactive & PPM tasks on our CAFM System * Ensure engineering standards are maintained in order to maximise efficient operation and reliability of plant. * To ensure company QA and site procedures are adhered to in all aspects. * To ensure that both Client and Integrals Health and Safety procedures are followed at all times. * To inspect the condition of services and proactively deal with call outs/repairs as required and/or requested by management. * To attend emergencies, inside and outside of normal working hours. * Keep and maintain all company issued tools in a safe and working condition. * To assess and order parts and equipment necessary for individual tasks. * To work to recognised industry standards at all times. * To undertake training as required to perform the duties of the role, including health and safety courses and further trade development, to maintain current knowledge and professional qualifications (Continued Professional Development). * To undertake any other duties as directed by Managers within the remit of the role. * Provide detailed and accurate reports for any remedial works required whilst attending site * Produce technical and situational reports as required * Updating of on-site log books for compliance purposes * Electrical testing and completion of any certificates or documentation for works completed * Complete on site Method Statements and Risk Assessments as necessary * This job description sets out the main duties of the post at the date it was completed. Such duties may vary from time to time without changing the general character of the post or the level of responsibility entailed. * To carry out electrical works, such as electrical wiring fault finding and repair, door entry and auto door control systems, emergency & non emergency lighting fault finding/repair and replacement, lamp changing, replacement socket outlets and other face plates, BMS and heating controls fault finding and repair, immersion heater and instantaneous water heater fault finding/repair and replacement, * Carry out PPM tasks, such as emergency light testing, fire alarm testing, distribution board checks, RCBO/RCD testing, fixed wire testing, tap temperature testing and flushing, Fan Coil servicing, AC/AHU filter replacement and cleaning, functional testing and visual inspection of equipment. What your day-to-day will look like: * Pro-actively develop and manage relevant stakeholder relationships ensuring that expected service levels are achieved. * Comply with all requirements of the Client contract and meet or exceed Key Performance Indicators * Deliver an exceptional quality of service to the Client, as reflected by Client feedback * Ensure the delivery of all operational requirements as per the client scope of works at the Client Site * Develop and implement operational procedures and performance measures to ensure simplification and accuracy of work methods, reliability of systems and consistency * Lead initiatives such as user experience programs, JLL system rollouts, regional training programs/workshops and other initiatives as appropriate, through driving implementation and consistency across the Region * Drive Client specific initiatives such technology rollouts, benchmarking, best practices etc. * Ensure site financial operations are meeting or exceeding targets and financial processes as well as controls are always adhered to. * Ensure compliance with JLL and client Health, Safety, Environment and Risk Management policies and procedures * Ensure data integrity of all systems across the Region and perform audits from time to time * Ensure meeting or exceeding SLA/KPI scores Ensuring up to date information on Clients Property Services SharePoint * Resolve user's complaints and concerns with solutions and follow up * Review and spot-check suppliers/service providers performance to ensure contractual obligations are delivered * Schedule detailed floor inspections conducted regularly * Implement service tasks, procedures and policies and measure performance * Ensure that an effective Work Order system is maintained for rectification of any defective items/services & ensure that these are addressed in a timely manner * Support with critical out-of-hours issues & participate as a key team member in responses to emergency situations * Coordinate churn work and minor project works requested by users * Implement and manage the change control process * Report building incident following with set escalation channels with measures and solutions * Manage Vendor Contract database to ensure they are up to date at all times * Manage vendor procurement processes and ensure timely contract execution, negotiation, including preparation of tender documentation and preparation of contracts in accordance with agreed guidelines * Generate reports and conduct presentations as per the service delivery requirements and overall account management. Required Skills and Experience: * NVQ 3 Electrical Installation * C&G Level 2 and 3 Diploma Electrical Installation * C&G 2360 Parts 1 & 2 or 2330 Levels 2 & 3 * C&G 2391 or 2394 & 2395 * 18th edition certificate * Extensive Knowledge of commercial electrical systems * Strong Electrical & Mechanical Maintenance experience * Knowledge of heating and air conditioning systems * Basic plumbing, carpentry and fabric skills would be an advantage. * Full UK Driving License * Knowledge of building fabric and experience in carrying out basic fabric reactive repairs when required * Extensive Knowledge of Health & Safety Regulations. * Ability to act on own initiative. * Smart appearance, presentable * Must be available for call outs * Good written and verbal communication skills * Able to work from a smartphone and PDA * Comfortable working within a team environment. Able to contribute to teams success whilst willingly following instructions * Self-motivated and able to work unsupervised * Adaptable and flexible approach to work requirements, willing to accept change. * The candidate will be required to adopt a flexible approach to working hours to suit the needs of the sector. This will require work at weekends and in the evenings. * IPAF 3a&3b * Pasma If this job description resonates with you, we encourage you to apply, even if you dont meet all the requirements. xrnqpay Were interested in getting to know you and what you bring to the table!

A national player within the Water Hygiene / Legionella industry is seeking an experienced Water Hygiene Engineer to cover sites around Yorkshire and the North West of England. Job Title: Water Hygiene Engineer. You will be carrying out a variety of water hygiene compliance tasks, and smaller legion

Service Delivery Consultant. Leeds Scroll down the page to see all associated job requirements, and any responsibilities successful candidates can expect. Were looking for a skilled and proactive Service Delivery Engineer to join our Managed Services team. This is a senior technical role where youll take ownership of service performance, reliability, and continuous improvement across customer environments. Youll act as a key technical escalation point, working closely with customers, internal teams, and stakeholders to deliver high-quality managed services that exceed expectations. This role blends deep technical expertise with strong communication and service management skills. What Youll Be Doing: • Proactively monitor and optimise customer platforms to ensure performance, availability, and capacity targets are met, • Act as the final escalation point for complex incidents, providing advanced troubleshooting and resolution, • Collaborate with customers and internal teams to drive continuous service improvement, • Support onboarding and transition of new managed service customers, including setup of monitoring, connectivity, and management tools, • Review and manage network changes, ensuring compliance with logging, monitoring, and security standards, • Maintain accurate technical documentation, including diagrams and operational processes, • Work alongside Account Managers and Sales teams to scope and support new opportunities Essential Skills & Experience • Strong 3rd Line / Infrastructure experience (35 years minimum), • Experience in a Managed Services environment, • Expertise in networking technologies including:, • Juniper (Mist), Aruba, or Cisco (switching, routing, wireless) xrnqpay, • VLANs, DNS, DHCP, and certificate services, • Firewalls (Fortinet, Cisco, Palo Alto, Check Point), • ESX / virtualisation experience, • Network Access Control (Cisco ISE / Aruba ClearPass), • Familiarity with ITSM tools (e.g. ServiceNow), • Cisco CCNP (or equivalent), • ITIL v4 Foundation, • Knowledge of Cyber Essentials / ISO 27001, • Experience with Infoblox DDI, • Experience managing change, problem, and major incidents

Job Description Please read the information in this job post thoroughly to understand exactly what is expected of potential candidates. Sysco are currently recruiting for a onsite Services Engineer to join the Belfast, Ireland Technology team reporting to the Services Engineer Manager. This position will be responsible for delivering Sysco technology services support located at sites within their designated region. The primary responsibilities of this position are related to the ongoing support of technology in the field to include, but not limited to workstations, output devices, (Printers and Multifunction Printers), software license compliance, security compliance, and hands-on support of IT infrastructure in the field in an overall objective to ensure a consistent technology experience across their region. Key Accountabilities & Responsibilities: • Provide technical support to Sysco operating sites across the designated region., • Ensure adherence to IT standards and provide the highest level of overall customer satisfaction., • Assist in ensuring accurate inventory of IT assets across their region., • Responsible for keeping business and IT management informed and escalating impactful issues on a timely basis as required., • Maintain accurate asset inventory of IT hardware, including but not limited to Laptops, Desktops, Printers, Networking hardware including switches, routers and access points, mobile phones, tablet devices, UPS and Comms Room Air Conditioning, • Maintains documentation of support related issues., • Responsible for their continual improvement including uptake of training opportunities for professional and career development. To be successful in this role you will have considerable customer service experience in Computer Technologyand be proficient at technical troubleshooting of desktop and laptop computers, mobile technology devices, Microsoft Windows, Office 365, MacOS, VMWare Workspace One and other desktop software.You will be able to use remote support tools to be able to troubleshoot remote computer devices and must be available for after hour support and weekend on-call support as needed. xrnqpay You will be a resourceful, reliable and trustworthy person whos accurate with numbers and able to use mathematical formulas within spreadsheets with excellent communication skills, (both written and verbal), organisational, presentation and problem-solving skills.

FM33268 The experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below. Electrical Generation Engineer - CHP Up to £50,000 (DOE) South of England Alecto Recruitment is working with a leading power generation and energy company who are seeking an Electrical Generation Engineer to support electrical maintenance, commissioning, and system optimisation across sites in the South of England. Key Responsibilities & Tasks • Carry out electrical maintenance, fault finding, and repair on generation assets and control systems., • Support commissioning, testing, and integration of new plant and facilities into operations., • Diagnose control system faults, including PLC logic and signal issues, and implement solutions., • Inspect, maintain, and operate LV/HV electrical equipment (subject to competency)., • Upgrade and replace control systems and electrical components where required., • Support and develop Operations staff through training, guidance, and supervision., • Ensure compliance with company procedures, NICEIC standards, and H&S legislation., • Manage electrical projects, including scoping works and supporting project delivery., • Maintain accurate documentation, reports, and commissioning records., • Strong experience in electrical maintenance, control systems, and commissioning., • Experience with CHP, gas engines, and/or solar systems., • Knowledge of generator control systems (e.g. CAT, MAN, MTU, etc)., • Experience with electrical systems (12V DC - 415V AC, 3-phase)., • Proven fault finding and PLC diagnostic skills., • 18th Edition and testing/inspection qualifications (2391 desirable)., • HV AP/SAP (desirable). To apply for this role please send your CV to or call ext 220 to discuss. xrnqpay Equally if this role would not be of interest to you but may be suitable friend or colleague, we can offer paid referral fees for successful placements.

Company description: Skills, Experience, Qualifications, If you have the right match for this opportunity, then make sure to apply today. Water Utility Company based in Yorkshire region of England. Job description: Solution Development Engineer Chemical & Process Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: • We offer a competitive salary, depending on experience, 4a, £53,444 - £62,876, • A company car benefit, • Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year), • Attractive pension scheme (up to 12% company contribution), • Development opportunities in line with the Solution Development Engineer progression plan, • 25 days annual leave plus bank holidays plus two extra wellness days!, • Life assurance cover of 4 times pensionable salary, • A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover., • Retail savings scheme Work type: Permanent. 37 hours per week, Monday Friday. We have an exciting opportunities for multiple Solution Development Engineers to join the Chemical and Process Engineering team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and themillions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. The Engineering teams are a key part of how we plan to meet the changing expectations of customers and regulators. This role offers the chance to apply your chemical/process engineering expertise to ensure safety and compliance across our operations. Youll lead investigations, review designs, and guide remediation work, balancing technical effectiveness with cost. Youll also help shape our engineering standards, stay ahead of industry developments, and support the growth of junior engineersall while playing a key role in our change management process. Where you fit in: The Chemical and Process Engineering Team focuses on: • DSEAR and COSHH compliance., • Carry out and review DSEAR risk assessments, Hazardous Area Classifications and COSHH Risk Assessments, • Evaluating treatment and pumping processes to inform operational and maintenance strategies., • Identifying, promoting and leading opportunities to improve treatment effectiveness and efficiency, • Defining technical scopes of work to support treatment improvement and compliance., • Critically appraise output from partners prior to document acceptance and actively engage with them to drive performance and standards, • Assess remedial requirements and provide cost effective process design intent specifications, • Provide technical support and guidance to the internal project delivery team and procurement., • Contributing to the development and governance of Yorkshire Waters Engineering Standards., • Coaching and mentoring team members and graduates to build internal technical capability., • Championing health and safety, conducting on-site audits, and ensuring compliance with company policies., • Supporting change management processes and acting as a subject matter expert., • A BEng or MEng degree in Chemical or Process Engineering, • Process engineering experience, preferably within the water / wastewater sector, including chemical handling, manufacture, dosing, and storage, • A strong understanding of major water and wastewater treatment processes and the role and impact of MEICA equipment, • Knowledge of environmental protection and water-quality-related legislation, • Proficiency in writing clear engineering standards and specifications, • Commercial awareness with a strong understanding of risk and value, • Experience developing technically and economically robust engineering solutions aligned with TOTEX and whole-life cost and carbon principles, • Strong communication skills, with the ability to explain technical concepts to non-engineers, • Experience working with external contractors and cross-functional teams, • Confidence in leading and facilitating multi-disciplinary groups, • Ability to train others and gain stakeholder buy-in, • A proven ability to build strong relationships with teams and partners, • Experience providing leadership, mentoring, and technical guidance to junior engineers and graduates, contributing to engineering capability development, • Physically fit to undertake confined space entry and work at height, • Background in water, wastewater, utilities, or manufacturing sectors, • Training and experience in Hazardous Area Classification, • Training and experience in leading hazard studies, • Competence with drawing creation using AutoCAD, • Asset management broad experience in engineering or process industries, • Chartered Engineer (IChemE) or working towards Chartership, • Experienced in leading Hazard Studies, QRAs & LOPA studies, • A Functional safety qualification (e.g. TV FS Eng), • Proven ability to lead change and influence culture and behaviours, • Familiar with ISO55000/PAS 55 quality systems Do we sound like your cup of tea? If youve got experience in Process and/or Chemical Engineering and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. xrnqpay No agencies please.

Company description: Are you the right candidate for this opportunity Make sure to read the full description below. Water Utility Company based in Yorkshire region of England. Job description: Senior Engineer ICA (Control & Automation) Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: • We offer a competitive salary, depending on experience, (4a), £48,250 £60,313, • A company car benefit, • Annual incentive related bonus (£1000 maximum Bonus Opportunity for the Performance Year), • Attractive pension scheme (up to 12% company contribution), • Life assurance cover of 4 times pensionable salary, • 25 days annual leave plus bank holidays - plus an extra wellness day!, • A great benefits package - choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover., • Retail savings scheme Work type: Permanent. 37 hours per week, Monday - Friday We have an exciting opportunity for a?Senior Engineer ICA to join the Asset Management team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, it's so much more than this. We look after communities, protect the environment, and plan to look after Yorkshire's water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the region's health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. The Asset Management team are a key part of how we plan to meet the changing expectations of customers and regulators. The Engineering Team provide technical expertise in the business to ensure compliance with regulation, legislation and to ensure efficiency in the full asset management lifecycle. As an ICA expert you will become part of the Engineering governance to ensure sustainability in a rapidly changing world of technology to meet our environmental and sustainability challenges. Where you fit in: As our Senior Engineer you will; • Provide technical supervision and line management of a team of Project Engineers, Graduates and Apprentices, • Provide technical expertise and knowledge within Control & Automation (C&I) discipline to lead or support on proactive and planned technical, engineering and investigations to develop detailed solutions., • Be responsible for delivering and developing robust engineering work packages work scopes which will then be delivered or transferred to a delivery team. Part of this role will provide Engineering Standards support to the ICA Principal Engineer, together with support to the capital teams for integration of new assets., • Attend YW Functional Work Group as a Subject Matter Expert in own specialist discipline/skills for developing maintenance plans, Engineering Specifications etc, particularly around automation and commissioning., • Lead Technical Governance Working Groups in control & automation application to support the capital delivery programme., • Provide engineering standards support to the ICA Principal Engineers in way of the development of the Engineering Specifications, WIMES and design guidance, • Provide on-site process and operational expertise in relation to the interrogation of control and process automation systems, instrumentation, PLC, and associated networks to determine the functional performance of safety systems/layers of protection etc., • Provide coaching and mentoring to team members to support the transfer of specialist knowledge and succession planning within Yorkshire Water., • You will hold an HNC/HND Degree or equivalent in Electrical/Electronic/Control & Instrumentation Engineering., • You will have previous experience in developing and writing engineering standards and specifications. In addition, you will have previous experience of developing engineering solutions and incorporating these into a work package/specification for delivery., • Experience of integrated PLC systems, deterministic communication networks and Systems Integration., • You will have excellent written and verbal communication skills including the ability to communicate complex technical concepts/strategies into more readily understood information suitable for a wider business audience and be able to influence people across multifunctional teams throughout the business., • You will have previous data management experience, and you will have strong analytical skills, be proficient in IT as you will be using a range of Company IT systems, Microsoft Office including Word and Excel and Office 365., • You will have the ability to engage with customers internally and externally, developing and maintaining strong positive business relationships to understand their needs and recognise opportunities., • A Degree in Engineering or equivalent, and preferably membership (or working towards membership) of a recognised Engineering Institution at Chartered or Incorporated Engineer status., • Plant optimisation and reliability engineering experience, • Experience of control systems used in automation within the process industry., • Asset management experience within a large-scale engineering or process related industry., • Experience of Safety Critical Systems, high integrity Safety Instrumented Systems (SIS) and IEC61511 Functional Safety In The Process Industry Although we operate 24 hours a day, 365 days a year, it's important to us that we support flexible working patterns and job share options (when we can), to help you make the best of both your work and home life. We know that juggling childcare responsibilities or getting that ideal work/life balance isn't always easy! Do we sound like your cup of tea? If youre an experienced Senior Engineering professional and want to help us deliver exceptional service for our customers whilst protecting the environment, then apply today to find out what a career with Yorkshire Water can offer for you. Accessibility We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Just a heads-up! We might start interviewing as soon as a suitable applicant is found. To make sure youre considered, please send in your application as soon as you can. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. xrnqpay All our roles are subject to a medical questionnaire, and further medicals when required. No agencies please

Electrical Project / Contracts Manager Applying for this role is straight forward Scroll down and click on Apply to be considered for this position. Job Description As an Electrical Project / Contracts Manager, you will take ownership of electrical and building services projects across a national portfolio of commercial sites, predominantly within supermarket and retail environments. Working closely with FM teams, site management and engineers, you will oversee a range of works including electrical upgrades, plant replacements, compliance works and lifecycle projects, all within live operational environments. Key Responsibilities • Managing electrical and building services projects from initial planning through to completion, • Delivering works within live retail and commercial environments while ensuring minimal disruption to operations, • Overseeing electrical systems including power distribution, lighting, control systems, BMS interfaces and associated building services, • Coordinating subcontractors, electrical engineers and suppliers to ensure projects are delivered safely, on time and within budget, • Managing and supporting engineers on site, ensuring high standards of workmanship and performance, • Acting as the key point of contact for client FM teams, site managers and internal stakeholders, • Producing and maintaining project programmes, cost trackers and progress reports, • Managing project variations and ensuring additional works are captured, costed and approved, • Ensuring materials, plant and labour resources are effectively planned and available, • Overseeing commissioning, testing and handover documentation, including certification, • Proven experience in an Electrical Project Manager, Contracts Manager or Area Manager role, • Strong electrical background (ideally qualified electrician or electrically biased engineer), • Solid technical knowledge of electrical systems including LV distribution, lighting, control systems and compliance works, • Experience delivering projects within live environments such as retail, supermarkets or large commercial estates, • Background within facilities management, building services or electrical contracting, • Experience managing engineers, subcontractors and multiple stakeholders across multiple sites, • Strong commercial awareness with the ability to manage project costs, programmes and variations, • Relevant qualification in Electrical Engineering, Building Services or Project Management preferred This is an opportunity to join a growing and forward-thinking building services and FM contractor with a strong national client base and a healthy pipeline of secured works. In return, the company offers: • Competitive salary, • Company vehicle or car allowance, • Pension scheme, • Ongoing professional development, • Supportive and collaborative working environment, • Clear progression opportunities within a growing business The company is committed to creating an inclusive and supportive workplace where employees are encouraged to develop, contribute ideas and build long-term careers. xrnqpay Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.

CS 501 LEV Engineers Needed! £35,000 - £40,000 UK Are you a P601-qualified LEV Engineer who's tired of being underpaid, overbooked, and overlooked? Do you want proper support, realistic workloads, top-tier equipment, and pay that reflects your expertise? If you hold the BOHS P601 - Thorough Examination and Testing of Local Exhaust Ventilation Systems, we want to talk to you. What's In It For You? • £35,000 - £40,000 + DOE (no vague promises), • Paid travel time, • Company vehicle + fuel card, • Overtime at enhanced rates, • Annual bonus, • Ongoing training & paid certifications, • Clear progression into Senior / Technical Lead roles You'll carry out Thorough Examination & Testing (TExT) of LEV systems across manufacturing, engineering, food production, and pharmaceutical sites. You'll: • Conduct LEV testing in line with HSG258, • Produce clear, compliant reports, • Identify defects and recommend remedial actions, • Liaise professionally with clients on-site Are you ready to apply Make sure you understand all the responsibilities and tasks associated with this role before proceeding. No being sent in blind. No unrealistic targets. Just professional LEV engineering done properly. You Must Have: • P601 qualification (essential), • Experience testing LEV systems, • Strong knowledge of COSHH & HSG258, • Full UK driving licence Why Engineers Join Us (And Stay) Because we actually understand LEV. We don't treat you like a number. We don't overload your diary. We don't cut corners. You'll be part of a specialist compliance team that values technical accuracy, safety, and long-term relationships - not rushed reports. Ready to Talk? If you're P601 qualified and even slightly curious about earning more while working smarter: Apply now. Or message us confidentially for an informal chat. No CV ready? No problem. Let's start with a conversation. P601 LEV Engineers are in demand. The question is - are you in the right company? xrnqpay To apply for this position send your CV to or call ext 202 for more information. INDW

Job Title: Refrigeration Engineer Location: Yorkshire and Lancashire Pay Range/details: £46,791.53 per annum(incl.13 standby payments) Contract Type: Permanent Omega are supporting a leading facilities management provider in their search for a Refrigeration Engineer work on a major UK supermarket contract. The right Refrigeration Engineer will be the first line in all service and maintenance throughout allocated sites. They will also effectively maintain service and repair Refrigeration Equipment in customer locations and aid HVAC equipment containing refrigeration circuits. Key Responsibilities - Refrigeration Engineer • Carry out reactive and planned refrigeration maintenance within agreed timescales., • Diagnose faults, identify non-repairable issues and recommend replacements., • Complete all PPM, technical and compliance paperwork accurately and on time., • Order and fit parts in line with company procedures., • Respond promptly to Helpdesk service calls and complete repairs efficiently., • Communicate issues affecting store operations to GSMs and build strong working relationships., • Complete surveys, reports and job documentation as required., • Participate in the out-of-hours standby rota and arrange cover when needed., • Working with CO? refrigeration pack systems., • Time-served apprenticeship with NVQ/C&G refrigeration qualification., • C&G 2079 / CITB refrigerant handling certificate / F Gas Category 1, • Strong refrigeration, electrical, mechanical and diagnostic skills., • Ability to read technical drawings and apply relevant H&S legislation., • Good communication and customer-facing skills., • Self-motivated, professional and able to work at heights using access equipment., • 33 Days Holiday (Inc. Bank Holidays)., • Private Pension., • HealthShield Cashback Plan - Reclaim part of your dental/optical costs., • OneCity - Employee Discount Platform., • Employee Value Awards up to the value of £250., • Access to Costco Personal Membership Subscription., • Mental and Physical Health Services (Wisdom, Thrive, SkinVision)., • Electric Car Scheme (Criteria Applies). Candidates who are currently a Refrigeration Engineer, HVAC Engineer, Air Conditioning Engineer, Maintenance Engineer or Service Engineer may be suitable for this position. xrnqpay For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Check out the role overview below If you are confident you have got the right skills and experience, apply today.

HV Project Engineer Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. Leeds (Hybrid) £65 an hour - Outside IR35 12 Month Contract Essential Skillset: • End-to-end delivery of HV renewable/grid projects (400kV), • Coordination of civil, electrical, P&C, SCADA, and OEM interfaces, • Strong DNO/TNO /Grid Operator experience, • Development and control of ITPs, QA/QC, and commissioning documentation, • Oversight of subcontractors and multi-disciplinary delivery teams, • Preparation and completion of full O&M and handover documentation packs, • Support to procurement, FAT witnessing, and technical compliance checks, • Risk management across design, construction, and commissioning phases, • Strong understanding of CDM, xrnqpay Grid Code, G99/G100, BS EN standards

Outside & inside IR35 contract options available. Hybrid working opportunities. This Environmental Engineering is with one of the world's largest and most reputable manufacturing companies. Operating on a state of the art, 600+ headcount site in Leeds, the company is continuing to invest millions of pounds on site into brand new innovative equipment, focussed on automation and robotics. Check below to see if you have what is needed for this opportunity, and if so, make an application asap. The company manufactures some of the world's most recognisable brands from their site. Strong investment into this site has led to the development of a world leading team, regularly tasked with multi-million-pound deliverables. This Environmental Engineer is based on a 6 month contract initially, with a possibility to extend. Dimensions of the Environmental Engineer role; • Communicating with external stakeholders, such as waste management and energy suppliers., • Conducting audit's of waste contractor's., • First point of contact with EA with all reference's to Env permit's. Please apply directly for further information regarding this Environmental Engineer position.

Submit your CV and any additional required information after you have read this description by clicking on the application button. Refrigeration Service Engineer - M62 Corridor £40,000 - £45,000 Basic | Excellent Benefits An excellent opportunity has arisen for an experienced Refrigeration Service Engineer to join a well-established contractor covering The M62 Corridor. This role offers a strong basic salary, long-term stability, and genuine opportunities for career progression. The Role * Service, maintenance, and fault finding on supermarket refrigeration pack systems * Working across Reading * Delivering high standards of service and compliance across client sites * Participating in an on-call rota (1 in 4) Qualifications & Experience * Time-served apprenticeship * NVQ / City & Guilds in Refrigeration & Air Conditioning * Refrigerant Handling - C&G 2079 or CITB equivalent * Experience working on commercial refrigeration systems * Full UK Driving Licence Package * £40,000 - £45,000 basic salary * 40-hour working week * 33 days holiday * On-call rota - 1 in 4 * Company van & fuel card (private use permitted) * Smartphone, laptop & uniform provided * Ongoing training and development If you're interested in hearing more about this opportunity, please get in touch for further details. xrnqpay Location: M62 Corridor Relevant Skills: Refrigeration Engineer, Service Engineer, Refrigeration Technician, Commercial Refrigeration, Supermarket Refrigeration, F-Gas Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.

Job Title: Legionella Remedial PlumberLocation: Leeds, West YorkshireSalary/Benefits: £26k - £38k + Training & Benefits Apply (by clicking the relevant button) after checking through all the related job information below. Our client has recently won new water hygiene / legionella contracts in Yorkshire and the North of England. They are seeking a professional and hardworking Legionella Remedial Plumber, with a diverse skillset and robust technical knowledge. You will be attending client sites to conduct routine and reactive plumbing repairs and installations, ensuring works are completed to a high standard and within agreed project scopes. This is an excellent opportunity to join a privately owned and growing outfit, who are able to offer competitive salaries and benefits packages. Locations of work include: Leeds, Bradford, Halifax, Huddersfield, Pudsey, Mirfield, Keighley, Wakefield, Barnsley, Garforth, Harrogate, Knaresborough, Tadcaster, Dewsbury, Batley, Barnsley, Castleford, Pontefract, Normanton, Doncaster, Snaith, Selby, York, Conisborough, Mexborough, Sheffield, Rotherham, Thorne, Goole, Rochdale, Oldham, Manchester, Bury, Heywood. Experience / Qualifications:-Track record working as a Legionella Remedial Plumber-Must hold the NVQ Level 2 in Plumbing as a minimum-Ideally will hold the NVQ Level 3 in Plumbing and / or G3 Unvented ticket-Robust knowledge of HSG 274 and ACOP L8 compliance guidelines-Experience working across a range of premises (including: commercial, domestic and industrial sites)-Good literacy, numeracy and IT skills The Role:-TMV servicing, replacements and installations-CWST replacements, refurbishments and installations-Re-routing and adjusting pipework-Valve and tap installations-Performing hot and cold water system upgrades-Deadleg removals-Assisting with chlorinations, cleans and disinfections where required-Identifying faults and making appropriate recommendations for repair / replacements-Producing detailed technical reports-Providing detailed technical advice and updates to clients Alternative job titles: Legionella Plumber, Water Hygiene Plumber, Plumber, Remedial Engineer, Remedial Technician, Environmental Service Technician. Future Select are recruiting in the Water Treatment/Hygiene industry; we work with the best clients & candidates and supply the majority of permanent jobs in the market. We would be interested in speaking to candidates with experience in any disciplines from Risk Assessors, Service Engineers, Account Managers and Business Development/Operational Managers through to Director level. We are inundated with applications, we will endeavour to get back in touch, however if you have applied to Future Select and you have not heard from us after a week, on this occasion, you will not have been successful. xrnqpay Your details will be saved on our system and you will be contacted in the future if a vacancy matches your skills. Future Select Copyright 2026

Company description: Experience, qualification, and soft skills, have you got everything required to succeed in this opportunity Find out below. Water Utility Company based in Yorkshire region of England. Job description: Solution Development Engineer - ICA (Control & Automation) Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: • We offer a competitive salary, (4a), £48,250 - £60,313, depending on experience, • A company car benefit, • Annual incentive related bonus (£1000 maximum Bonus Opportunity for the Performance Year), • Attractive pension scheme (up to 12% company contribution), • Life assurance cover of 4 times pensionable salary, • 25 days annual leave plus bank holidays plus an extra wellness day!, • A great benefits package choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover., • Retail savings scheme Work type:?Permanent. 37 hours per week, Monday Friday We have an exciting opportunity for a Solution Development Engineer - ICA to join us in the Asset Management team and be a part of helping us give the very best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, its so much more than this. We look after communities, protect the environment, and plan to look after Yorkshires water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the regions health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. The Asset Management team are a key part of how we plan to meet the changing expectations of customers and regulators. The Engineering Team provide technical expertise in the business to ensure compliance with regulation, legislation and to ensure efficiency in the full asset management lifecycle. As an ICA expert you will become part of the Engineering governance to ensure sustainability in a rapidly changing world of technology to meet our environmental and sustainability challenges. Where you fit in: As our Solution Development Engineer ICA you will: • Provide technical expertise and knowledge within Control & Automation (C&I) discipline to lead or support on proactive and planned technical, engineering and investigations to develop detailed solutions., • Be responsible for delivering and developing robust engineering work packages work scopes which will then be delivered or transferred to a delivery team. Part of this role will provide Engineering Standards support to the ICA Principal Engineer, together with support to the capital teams for integration of new assets., • Attend YW Functional Work Group as a Subject Matter Expert in own specialist discipline/skills for developing maintenance plans, Engineering Specifications etc, particularly around automation and commissioning., • Lead Technical Governance Working Groupsin control & automation application to support the capital delivery programme., • Provide engineering standards support to the ICA Principal Engineers in way of the development of the Engineering Specifications, WIMES and design guidance, • Provide on-site process and operational expertise in relation to the interrogation of control and process automation systems, instrumentation, PLC, and associated networks to determine the functional performance of safety systems/layers of protection etc., • Provide coaching and mentoring to team members to support the transfer of specialist knowledge and succession planning within Yorkshire Water, • You will hold an HNC/HND Degree or equivalent in Electrical/Electronic /Control & Instrumentation Engineering., • You will have previous experience in developing and writing engineering standards and specifications. In addition, you will have previous experience of developing engineering solutions and incorporating these into a work package/specification for delivery., • Experience of integrated PLC systems,deterministic communication networks and Systems Integration., • You will have excellent written and verbal communication skills including the ability to communicate complex technical concepts/strategies into more readily understood information suitable for a wider business audience and be able to influence people across multifunctional teams throughout the business., • You will have previous data management experience and you will have strong analytical skills, be proficient in IT as you will be using a range of Company IT systems, Microsoft Office including Word and Excel and Office 365., • You will have the ability to engage with customers internally and externally, developing and maintaining strong positive business relationships to understand their needs and recognise opportunities., • A Degree in Engineering or equivalent, and preferably membership (or working towards membership) of a recognised Engineering Institution at Chartered or Incorporated Engineer status., • Plant optimisation and reliability engineering experience, • Experience of control systems used in automation within the process industry., • Asset management experience within a large-scale engineering or process related industry. Do we sound like your cup of tea? If youve got experience in Solution Development Engineering, Control & Automation Engineering or Instrumentation and want to help us deliver great service for our customers whilst looking after the environment, then be sure to apply today to find out what a career with Yorkshire Water can offer you. Accessibility We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Just a heads-up! We might start interviewing as soon as a suitable applicant is found. To make sure youre considered, please send in your application as soon as you can. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. xrnqpay No agencies please.

Location: Leeds The following information provides an overview of the skills, qualities, and qualifications needed for this role. Emtec Building Services North is strengthening its delivery leadership team as we mobilise new projects and build on a strong, secured pipeline of work across the region. As part of this continued growth, were looking for an experienced Mechanical Project Manager to join us in Leeds. This is a key leadership role where youll take full ownership of mechanical projects from pre-construction through to handover. You'll be leading site teams, developing strong client relationships, and playing an active role in shaping our expanding presence in the North. Emtec Building Services is a leading M&E contractor delivering end-to-end mechanical and electrical solutions across commercial, industrial, and public sector projects, from early design and pre-construction through to installation, commissioning, and ongoing support. The Role As Mechanical Project Manager, youll be responsible for the safe, efficient, and successful delivery of mechanical packages across a range of commercial construction projects, while supporting the development of your teams and identifying opportunities to grow the business. What Youll Be Doing: * Leading site and project teams, ensuring compliance with Health & Safety, environmental, and quality standards. * Managing project budgets, reporting, and ensuring projects are delivered on time and within scope. * Overseeing variations and tendering additional works where required. * Providing technical support to clients and site teams throughout the project lifecycle. * Mentoring and developing your team, driving performance and encouraging professional growth. * Building strong client relationships that lead to repeat business and long-term partnerships. * Supporting commercial, design, and delivery coordination across contracts. What Youll Bring * Youll be a qualified Mechanical Engineer with Extensive experience in commercial and Industrial construction and fit out sectors. * Proven M&E Project Management experience. * Strong commercial, design, financial, and delivery knowledge across construction contracts. * Confident leadership style with excellent communication and organisational skills. * A proactive, client-focused approach with a genuine passion for quality and delivery excellence. * SMSTS What's In It for You * Attractive Salary Package: Based on skills and experience * Generous Holidays: 33 days of holiday (inclusive of public holidays), increasing with length of service. * Holiday Purchase/Sell Scheme: Additional flexibility to suit your needs. * Contributory Pension Scheme: Secure your future with our contributory pension plan. * Life Assurance: Peace of mind for you and your family. * Development Opportunities: Excellent training and support for career growth. * Wellness Support: Access to our Employee Assistance Programme and wellness portal. * Exclusive Discounts: Benefit from our Employee Discounts Platform. * Convenience: Free parking at our offices and a cycle scheme. In return, youll become part of a dedicated and passionate team that values and rewards commitment and success. If this feels like the right opportunity for you, wed love to hear from you. Emtec Group is proud to be an equal opportunities Employer. We are committed to fostering a workplace that is inclusive, free from discrimination and empowers everyone to bring their whole self to work, reaching their full potential. At Emtec, we understand that a diverse team is key to our growth and success. xrnqpay We hire exceptional people from all backgrounds, not just because its the right thing to do, but because it strengthens our company.

About The Role Ensure you read the information regarding this opportunity thoroughly before making an application. Engineered to Protect, thats our promise, we protect what matters - our nations, our waters, our land, our cities, our people, our environment, our world.Provides electrical drafting support using Zuken E3 to produce accurate schematics, wiring diagrams and layouts, maintain high-quality ECAD documentation, follow defined standards, and contribute to consistent drafting outputs within the ECAD drafting team. Electrical Design / Drafting Engineer will be based at one of our Barnstaple, Beckington or Bristol sites. This role allows for flexible Home working. The salary for this role is up to £44k, depending on experience. Whatyoullbedoing • Produce accurate electrical schematics, wiring diagrams and panel layouts using Zuken E3. Maintain compliance with drafting standards and support the creation and updating of ECAD documentation. Assist in sustaining the electrical parts library, ensuring data consistency and supporting project delivery needs, • Interpret engineering inputs and translate them into clear drafting deliverables. Support configuration control processes for drawings and library items. Collaborate with electrical design, manufacturing and build teams to resolve documentation queries and ensure clarity in electrical definition, • Hybrid/flexible working arrangements, • 25 days annual leave, plus buy and sell, • Up to 16 days flexi leave accrual, • Half day Fridays, • Reservists in theArmedForces receive special paid leaveFamily & wellbeing, • Private medical health insurance & Employee Assistance Program, • All Staff Bonus, • Group Pension Plan of up to 7% employer contribution, • Cycle to work scheme, • Wellbeing Centre, • Sports & Social activities, • Employee Discounts portal - online and in-store discounts, travel savings, • Life assurance policy, • Publication and recruitment bonus rewards, • Development opportunities, including LinkedIn learningFacilities & resources, • Electric vehicle charging points at all sites, • Private seated lunch areas, • Onsite bistro (Barnstaple office) and free hot and cold beverages, • Onsite showers and toiletries provision, • Free onsite parkingTheskills you need, • Experience in using Zuken E3 for creating electrical schematics, wiring diagrams and layouts, • Electrical drafting ability, producing clear, accurate and standards-compliant documentation, • Understanding of electrical parts library usage, including the ability to update and maintain existing library items under guidance, • Experience contributing to drafting process improvements or supporting standardisation activities, • Awareness of electrical manufacturing and assembly practices, improving documentation clarity and build friendliness

Monday Friday We have an exciting opportunity for a Reliability Engineer to join the Maintenance Design and Assurance Team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Your work will directly contribute to enhancing Compliance, reliability

Location:UK-wide (major rail hubs considered) Making sure you fit the guidelines as an applicant for this role is essential, please read the below carefully. Employer:Award-Winning Technical Consultancy Technical Assurance Engineer (Rail) - A role designed for someone who thrives at the intersection of engineering integrity, safety, and project delivery supporting rail and infrastructure programmes across the UK and internationally. The Opportunity Our client is a respected, award-winning consultancy known for delivering high-quality engineering and assurance expertise across major rail and infrastructure projects. They are expanding their Technical Assurance capability and are seeking aTechnical Assurance Engineerwho can bring structure, clarity, and technical confidence to complex, multi-disciplinary programmes. This position plays a pivotal role in ensuring that designs, systems, and assets meet the required standards, regulations, and safety expectations throughout the project lifecycle. Key Responsibilities • Leading and coordinating technical assurance activities across rail and infrastructure projects., • Developing and maintaining assurance strategies, plans, and compliance documentation., • Ensuring engineering requirements are met, evidenced, and traceable from design through to commissioning., • Supporting audits, technical reviews, and safety assessments., • Working collaboratively with design, engineering, construction, and testing teams., • Providing guidance on standards, governance, and assurance frameworks (e.g., NR/L2, CSM-RA, ROGS). The role coversall aspects of rail assurance, but candidates with signalling experience (whether in design, testing, systems, or integration) will bring additional insight that is highly advantageous. Not essential, but a strong differentiator. What Youll Bring • Experience in technical assurance within the rail or wider infrastructure sector., • Understanding of assurance frameworks, safety processes, and regulatory requirements., • Ability to interpret complex engineering information and translate it into clear assurance evidence., • Strong communication skills and confidence working with multi-disciplinary teams., • A structured, methodical approach with the ability to challenge constructively., • The chance to work on high-profile UK and international rail projects., • A supportive consultancy environment that values technical excellence and professional growth., • Opportunities to develop your assurance expertise across multiple disciplines. xrnqpay If youre ready to take the next step in your assurance career and want to contribute to projects that shape the future of rail and infrastructure, wed love to hear from you. Send your CV or get in touch for a confidential conversation.

E3 Recruitment is looking for a Facilities Engineer to join a global manufacturing business in Dudley Hill, UK.The role includes performing planned maintenance and repairs, ensuring safety compliance, and supporting facilities projects.Benefits include a starting salary of £40,007.The position offe

A leading water services provider is seeking a Project Engineer to join the Specialist Projects Team. This role involves delivering engineering solutions, managing project designs, and ensuring compliance with regulations. Ideal candidates will have a degree in engineering or equivalent, practical e

Mectrical Jobs is seeking an experienced MsE Project Engineer (Electrical Bias) to join the team in Baildon, West Yorkshire.The role involves overseeing full MCE project delivery, including managing project estimates, procurement, and site delivery while ensuring compliance with health and safety st

Senior Electronics Engineer Location: Pudsey, West Yorkshire Salary: Up to £70,000 DOE KO2's client is a specialist engineering business based in the Bradford area, developing and designing bespoke electronic equipment for a range of applications. Due to continued growth, they are looking to add an experienced Electronics Engineer to their engineering team. This is a hands on role suited to an engineer with a strong electronics skill set who enjoys working on custom designs from concept through to production. The Role Design and develop bespoke electronic systems and circuits Work across the full product lifecycle: requirements, design, prototyping, testing, and production support Create schematics, PCB layouts, and technical documentation Debug, fault-find, and improve existing designs Support products through EMC testing and regulatory approval Collaborate closely with mechanical, software, and manufacturing teams Key Skills & Experience Strong background in analogue and digital electronics design Experience designing bespoke or low-volume electronic products Schematic capture and PCB design using Altium Designer, Eagle, or KiCad Proven experience with EMC and regulatory compliance (e.g. CE, UKCA, FCC) Confident with debugging, testing, and fault-finding at board level Ability to work independently and take ownership of designs Relevant degree or equivalent industry experienceDesirable (but not essential) Knowledge of wireless technologies Embedded systems and microcontroller development Knowledge of sensor systems, signal conditioning, and low‑power electronics.What's on Offer Opportunity to work on interesting, custom-engineered products A technically focused role with real design ownership Supportive, engineering-led environment Competitive salary and benefits packageApply today with an up to date CV and a member of the KO2 team will be in touch to progress your application. *KO2 specialises in the embedded and electronics design sector. If this role isn't right for you but you know someone who may be interested, please let us know - we offer a referral bonus for successful introductions

Futures are looking to appoint a Service Engineer to join our clients growing team, supporting high precision 3–5 axis CNC machine tools across the UK and internationally. This is an exciting opportunity for an experienced engineer with a strong background in CNC machinery, precision engineering, and customer support to work with advanced machining technologies in a fast-paced and customer-focused environment. The successful candidate will be responsible for the installation, commissioning, servicing, maintenance, fault diagnosis, and repair of high-specification CNC machine tools at customer sites worldwide. Key Responsibilities • Install and commission high precision 3–5 axis CNC machine tools at customer facilities. • Carry out preventative maintenance, breakdown response, and repair activities. • Diagnose electrical, mechanical, pneumatic, hydraulic, and CNC control faults efficiently. • Provide technical support and troubleshooting both on-site and remotely. • Calibrate and align machines to ensure optimal precision and performance. • Support machine upgrades, retrofits, and software updates where required. • Deliver customer training on machine operation and maintenance best practices. • Complete detailed service reports and maintain accurate documentation. • Work closely with internal engineering and technical support teams to resolve complex issues. • Maintain high standards of customer service and professionalism at all times. • Ensure compliance with all health & safety procedures and company policies. • Travel extensively throughout the UK and internationally as required. Skills & Experience • Proven experience servicing CNC machine tools, ideally 3–5 axis machining centres. • Strong understanding of CNC controls such as Siemens, Heidenhain, Fanuc, or Mazatrol. • Excellent fault-finding skills across electrical and mechanical systems. • Ability to read and interpret engineering drawings, schematics, and technical documentation. • Strong customer-facing and communication skills. • Self-motivated with the ability to work independently. • Full UK driving licence. • Willingness and ability to travel extensively within the UK and globally. • HNC/HND or equivalent qualification in Mechanical, Electrical, or Mechatronic Engineering

Multi-Skilled Maintenance Engineer (Electrical Bias Preferred) Bingley | Mon–Fri 08:00–16:30 + Alternating On-Call £37,000 – £40,000 + Overtime + Call-Out Allowance Exclusively represented by AQUMEN Recruitment AQUMEN Recruitment is proud to be recruiting for a skilled Multi-Skilled Maintenance Engineer on behalf of a well-established manufacturing business based in Bingley. This is a fantastic opportunity to join a stable production environment where you'll play a key role in maintaining machinery reliability, supporting production output, and ensuring a safe working environment across the site. If you're an engineer who enjoys ownership, responsibility, and variety in your day-to-day role — this position offers exactly that. ? The Role You will be responsible for maintaining machinery, facilities, and site safety systems to support efficient production operations and minimise downtime. Key responsibilities include: • Responding quickly and effectively to production machinery breakdowns • Carrying out planned preventative maintenance activities • Ensuring machinery and factory areas remain safe for use • Inspecting safety devices including guards, alarms, sensors, and exits • Isolating unsafe machinery or work areas where required • Supporting continuous improvement and reliability initiatives • Coordinating maintenance planning with supervisors and site leadership • Monitoring contractors and visitors to ensure safe working standards • Maintaining accurate maintenance records and compliance documentation • Supporting site Health & Safety and BRC requirements • Keeping workshop areas organised and audit-ready at all times About You AQUMEN Recruitment is keen to speak with engineers who: • Are fully qualified to carry out maintenance engineering work • Ideally hold electrical qualifications (preferred) • Have experience within a manufacturing or production environment • Are proactive problem-solvers with strong fault-finding ability • Work safely and follow structured maintenance procedures • Are self-motivated and reliable • Are willing to participate in alternating evening call-out cover Working Hours & Benefits ? Monday–Friday 08:00–16:30 ? Alternating evening call-out cover (overtime rates apply) ? Competitive salary: £37,000–£40,000 ? Day-shift engineering role with strong work–life balance ? Opportunity to contribute to machinery upgrades and reliability improvements ? Long-term opportunity within a stable manufacturing environment Why Apply Through AQUMEN Recruitment? AQUMEN Recruitment specialises in placing high-quality engineering professionals into long-term career opportunities across Yorkshire and the wider region. We provide full support throughout the application process and act as your advocate from first conversation through to placement. Interested? Apply today or contact AQUMEN Recruitment for a confidential discussion about the role. Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

M&E Project Engineer (Electrical Bias) Baildon, West Yorkshire Salary - £30-£35k We are seeking an experienced M&E Project Engineer (Electrical Bias) to join a growing team based in Baildon. This is a hands-on role suited to someone with a strong electrical background who is equally comfortable overseeing the full lifecycle of M&E project delivery. This role operates within a lead engineer model, giving you full ownership of your projects from initial review through to final account and handover. Key Responsibilities Review and re-evaluate projects against initial estimates prior to commencement Procure materials and manage buying processes efficiently Develop, manage, and maintain detailed project programmes Oversee site delivery, ensuring quality, compliance, and efficiency Manage and enforce health & safety standards on site Prepare valuations and manage variations, including pricing and negotiation Drive projects through to completion, including final account agreement and handoverYou may also support the estimating function during busy periods, so commercial awareness and a collaborative approach are essential. What We're Looking For Strong electrical background with a solid understanding of full M&E project delivery Proven experience managing projects end-to-end Commercially aware, confident in valuations, cost control, and variations Highly organised, proactive, and comfortable taking ownership Flexible and team-oriented, with a willingness to support across the businessRG Setsquare is acting as an Employment Agency in relation to this vacancy

Site Engineer | Main Contractor | Yorkshire | £50k - £55k + Package I’m currently recruiting for a Site Engineer to join a well-established, forward-thinking main contractor with a strong regional presence and diverse project portfolio across commercial, education and public sector schemes This is a key role within the production team, responsible for setting out, quality control and ensuring works are delivered safely, accurately and in line with programme The Role: Take responsibility for setting out and engineering control on site Ensure works are delivered in line with drawings, specifications and QA standards Maintain accurate site records, as-builts and weekly measurements Support cost control through clear record keeping of variations and progress Liaise with project managers, designers and consultants to resolve technical issues Contribute to high standards of health, safety and environmental compliance Support or undertake duties such as Temporary Works or Lifting Operations (training provided where required) About You: Degree / HNC in Construction or Civil Engineering (or similar) Experience as a Site Engineer on building or civil engineering projects Confident using total stations and survey equipment Strong understanding of QA processes and site documentation Technically strong with the ability to read and interpret design information Proactive, organised and able to work independently or as part of a team This is an excellent opportunity to join a contractor with a strong pipeline of secured work and a reputation for quality delivery and professional development If you're a Site Engineer looking for your next move, apply now or get in touch for a confidential discussion

M&E Project Engineer (Electrical Bias) | Building Services / FM | West Yorkshire | £45k - £60k + Package We’re working with a growing building services contractor to appoint an M&E Project Engineer with a strong electrical bias to support project delivery across Yorkshire and the wider region. This is a hands-on role within a close-knit team, where you’ll take ownership of projects from pre-start through to completion. Schemes are typically small works, refurbishments, and M&E upgrades, delivered in fast-paced environments with a strong focus on quality and client service. They are looking for someone who can manage both the technical and commercial aspects of projects, not just site coordination. What You’ll Be Doing. Managing projects from initial review through to final account Procuring materials and coordinating suppliers Producing and managing project programmes Overseeing site delivery and ensuring quality standards Managing H&S compliance Preparing valuations and handling variations Supporting estimating when required What You Will Need. Strong electrical background with M&E understanding Proven experience delivering projects end-to-end Commercial awareness (valuations, variations) Organised, proactive, and able to take ownership Strong communication and team collaboration skills Why Apply? Opportunity to take full ownership of projects Join a growing, well-regarded contractor Varied workload across multiple sectors Supportive team with progression potential If you’re an M&E Project Engineer looking for a role with real responsibility and growth potential, this is a great opportunity. Apply now for a confidential discussion

Traffic Engineer Contract: Initial 6 months Rate: £40-45 per hour I am recruiting for an experienced Traffic Engineer to support the delivery of Traffic Regulation Orders (TROs) and small traffic management schemes. This role would suit a self-sufficient engineer who can manage schemes with minimal supervision and is confident working across the full design and delivery process. Key Responsibilities: ·Design and delivery of TROs and small traffic measure schemes ·Production of drawings using KeySIGN and KeyLINES ·Managing schemes from concept through to implementation ·Liaising with internal teams and external stakeholders ·Ensuring compliance with relevant standards and legislation Essential Experience: ·Strong background in TROs and small traffic schemes ·Very experienced user of KeySIGN and KeyLINES ·Able to work independently with little supervision ·Local authority highways experience preferred This is an excellent opportunity to join a busy highways team where demand is high and projects are ongoing. For a full description and further information on the role, please call Jason Kohle at Carrington West on (phone number removed). FOOTNOTE: If you feel that you are right for this role technically, but the rate, location or seniority does not suit you specifically then please still feel free to send us your CV. We constantly recruit for roles very similar to this one at all levels UK Wide. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highways, Traffic & Transportation professionals keen to make their introductions for future months or years. Our specialist team has a combined 40+ years' experience in this market. Please call Jason at Carrington West on (phone number removed) for more information. By applying for this position you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third party clients specifically relevant to any roles you have applied for. If at any stage you wish to withdraw your consent please email

Our Client is a pioneering engineering company at the heart of the green economy, with a bold vision and a proven delivery record. With innovation, sustainability, and technical excellence at their core, they are looking for a Lead Electrical Design Engineer to help spearhead the next phase of growth. As the Lead Electrical Design Engineer you will play a critical leadership role within integrated mechanical, electrical, and building services design functions. Reporting directly to the MEP Design Manager, you'll take full responsibility for the design and delivery of electrical systems across complex projects — setting design direction, mentoring junior engineers, and driving innovation in low carbon technologies. This position requires an experienced and confident Engineer who can combine deep technical knowledge with strong commercial awareness. You’ll bring strategic thinking to the table, shape early stage concepts, and ensure robust, regulation-compliant systems are delivered to the highest standards. Key Responsibilities: • Lead the end-to-end electrical design process from feasibility to detailed execution, across high profile HVAC and refrigeration projects, • Provide senior-level technical guidance and mentoring to intermediate and junior engineers, • Collaborate with the estimating and sales team to review enquiries and develop competitive, compliant concept solutions, • Oversee site surveys and evaluate existing systems, identifying integration opportunities and retrofit solutions, • Champion best practices in energy-efficient design — including power load calculations, energy modelling, and controls integration, • Review and approve all electrical engineering documentation, from schematics to commissioning plans, ensuring clarity and compliance, • Act as technical authority in client meetings, representing the company with confidence and offering clear solutions to complex design challenges, • Liaise closely with the Projects Team during design handover, providing technical assurance throughout the build phase, • Lead post-project reviews to drive continuous improvement, knowledge sharing, and innovation across the team What You Bring: • Extensive experience in electrical design within building services, ideally in refrigeration or HVAC, • Track record of managing or leading multi-disciplinary design teams, • Degree qualified in Electrical Engineering or related discipline, • Strong knowledge of BS7671:2018 + A2 and other relevant standards and regulations, • Proficient in software such as AutoCAD, Amtech, Dialux, Trimble, • Effective communicator, both technically and commercially, with clients and colleagues alike, • Full UK driving licence for travel to client sites Applications are invited from experienced Electrical Building Services Design Engineers interested in supporting the NetZero and decarbonisations ambitions of high profile property owners including retail giants, public sector institutions and leisure chains