Trabajos electrical en Maidenhead - Page 2Crear alertas

The Role As Engineering Supervisor, you’ll oversee day-to-day engineering operations within a critical environment, ensuring all systems operate at peak performance. You’ll lead a team of engineers, drive compliance, and act as a key decision-maker during technical incidents. Key Responsibilities • Supervise and support a team of engineers across shift operations, • Ensure all critical infrastructure (electrical, mechanical, HVAC) is maintained to the highest standards, • Act as HV Authorised Person (AP) – managing switching operations and ensuring safety compliance, • Lead incident response and root cause analysis for critical failures, • Plan and oversee PPMs and reactive maintenance activities, • Maintain compliance with HSE, client procedures, and industry standards, • Liaise with stakeholders and provide technical reports and updates What We’re Looking For • Proven experience in a critical data centre or mission-critical environment, • HV Authorised Person (AP) certification – essential, • Strong leadership and team management experience, • Solid understanding of electrical and/or mechanical systems, • Experience with permit-to-work systems and safe systems of work, • Ability to remain calm under pressure and make decisive calls

Test Technician – RF / Electronics – £20/hr (Inside IR35) – Onsite (Maidenhead) We’re looking for a Test Technician to support the production of high-performance RF and communications equipment within a hands-on manufacturing environment. This role involves testing, fault-finding, and assembly work, ensuring products meet quality and technical standards across the production lifecycle. You’ll be working closely with the production team in a fast-paced, detail-driven setting. Skills & Experience: Essential: • Experience in electronics testing, fault finding, or assembly, • Ability to read and work from technical drawings and schematics, • Understanding of electrical principles (RF knowledge beneficial), • Comfortable using test equipment and production software, • Strong attention to detail and quality standards Desirable: • Experience within RF, telecommunications, or similar industries, • Exposure to ATE testing or module programming, • Experience working in a production or manufacturing environment Additional Information: • £20/hour (Inside IR35), • Full-time onsite (Maidenhead), • 37.5 hours per week (Mon–Fri), • Unlimited overtime paid in full, • Hands-on production environment

Job Title: Senior Systems Engineer – Hardware & Secure Systems Location: Loudwater Salary: £DOE Are you a Systems Engineer who thrives on complexity, security, and real-world impact? As a dedicated recruitment partner at ESCO Maritime, we are looking for a Senior Systems Engineer to lead the development of secure, hardware-centric systems in a highly regulated environment where precision, resilience, and innovation are critical. This is a role for someone who enjoys owning the full system lifecycle, influencing design decisions, and working at the intersection of hardware, software, and secure architectures. The Role You’ll take a lead position in delivering complex systems from concept through to in-service support, with a strong focus on secure design, hardware integration, and systems assurance. Key responsibilities include: • End-to-End Lifecycle Ownership – Define and manage system lifecycles from concept to retirement, ensuring robust governance and clear design decisions, • Requirements Engineering – Capture, analyse, and manage complex, traceable requirements, ensuring alignment across multidisciplinary teams, • System Architecture & Design – Develop secure, hardware-led architectures with full traceability from requirement to solution, • Technical Leadership – Lead cross-functional engineering teams (hardware, software, electrical), driving delivery and resolving technical challenges, • Integration, Verification & Validation – Plan and execute system integration, testing, and formal acceptance in line with stringent standards, • Interface & Configuration Management – Maintain system integrity across internal and external interfaces, • Security & Compliance – Ensure systems meet defence-grade security, regulatory, and safety requirements, • Stakeholder Engagement – Work closely with customers and senior stakeholders, influencing decisions and managing evolving requirements, • Continuous Improvement – Drive best practice across systems engineering processes, tools, and methodologies What We’re Looking For Essential: • Degree in Systems Engineering, Electrical Engineering, or similar, • Strong experience delivering complex systems engineering programmes, ideally with hardware focus, • Proven expertise in requirements management, traceability, and configuration control, • Experience across integration, verification, and validation activities, • Strong stakeholder engagement skills, with the confidence to challenge and influence, • Excellent communication skills, both written and verbal, • Experience working in secure or regulated environments, • High proficiency with data, tools, and systems (e.g. Excel, requirements tools) Desirable: • Experience designing or supporting secure systems for defence environments, • Background in electronics, hardware, or embedded systems, • Familiarity with MBSE, Jira, Jama Connect or similar tools, • Experience with ILS, reliability engineering, or technical documentation, • Knowledge of cyber security, information assurance, or secure architectures Why This Role? • Work on mission-critical, secure systems with real-world impact, • Influence architecture and design decisions at a senior level, • Be part of a collaborative, forward-thinking engineering environment, • Opportunity to shape best practices and drive innovation Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy

Job Title: Contract Systems Engineer Location: Loudwater (Hybrid Working) Term: 12 Months IR35: INSIDE Hourly Rate: £DOE Are you motivated by solving complex systems challenges and managing detailed requirements across the full lifecycle? As a dedicated recruitment partner at ESCO Maritime, this is an opportunity to join a dynamic engineering environment where your systems thinking, technical leadership, and structured approach will directly influence cutting-edge projects in a highly regulated domain. The Role As a Contract Systems Engineer, you will take ownership of system lifecycle activities from concept through to retirement, ensuring robust requirements management, architecture development, and successful system integration. You will work closely with multidisciplinary teams and stakeholders, driving clarity, traceability and technical excellence throughout. Key Responsibilities Lifecycle Management Plan and implement tailored system lifecycle models, managing all stages from concept to disposal. Lead and support design reviews, ensuring clear documentation of decisions and actions. Requirements Engineering Elicit, analyse, and define clear, traceable requirements aligned to stakeholder needs. Maintain validation, assumptions, and constraints across all levels while ensuring full lifecycle traceability. System Architecture & Design Develop and communicate system architectures, ensuring alignment to requirements, integration of subsystems, and appropriate test configurations. Interface Management Define, manage, and control system interfaces (internal and external) to maintain system integrity. Integration, Verification & Validation Plan and support integration activities, verification, and qualification testing. Lead formal system validation with acceptance authorities, ensuring traceability and compliance. Tools & Data Management Utilise requirements management tools to maintain configuration control, data integrity, and traceability across complex datasets. Essential Skills & Experience • Degree in Systems Engineering, Electrical Engineering, or a related discipline, • Proven experience in systems engineering and requirements management within complex environments, • Strong experience with requirements management tools and methodologies, • Experience handling large datasets with strong configuration and data control practices, • Solid background in system integration, verification, and test planning, • Strong analytical and problem-solving skills, • Excellent stakeholder engagement and communication skills, • Experience working in secure or sensitive environments, • High proficiency with MS Office tools (Excel, Word, Outlook, Teams) Desirable Experience • Experience in defence, aerospace, or other high-integrity sectors, • Knowledge of secure systems design / information assurance (UK MoD environments), • Familiarity with electronic/electrical systems, • Experience with integration, qualification, and system testing activities, • Exposure to Integrated Logistics Support (ILS), reliability, and technical documentation, • Experience with Agile methodologies and tools such as Jira, • Familiarity with Jama Connect or similar requirements tools, • Understanding or experience of Model-Based Systems Engineering (MBSE) If you are a Systems Engineering professional who thrives on complexity, structure, and delivering high-integrity solutions, this is for you. Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy

Installation Engineer (Medical) Location: North Manchester & Heathrow Job Type: Full Time, Permanent Salary: £35 - £50k (depending on experience) + Overtime About the Role TxP are seeking a practical and motivated Medical Installation Technician to support the delivery, installation, and positioning of high-value medical imaging equipment across the UK and Europe. This is a hands-on, varied role working closely with internal project teams, external contractors, and customers on-site to ensure successful project execution. This position requires flexibility, a strong work ethic, and a willingness to travel and stay away from home regularly. Main Responsibilities • Deliver and positioning of high-value medical equipment including CT, MRI, and X-ray systems, • Carry out on-site installation tasks such as cabling, final connections, and system cover alignment, • Work closely with project coordinators, client teams, and third-party contractors to ensure smooth project delivery, • Perform driving, loading/unloading, and manual handling duties across the UK and Europe using specialist equipment, • Complete required documentation, paperwork, and timesheets accurately Skills & Experience • A practical aptitude with a strong willingness to learn, • Experience in mechanical and/or electrical installations (field service or installation background desirable), • Experienced driver with a clean licence, DVLA check will be required, • Excellent communication skills with experience dealing directly with customer contacts, • Strong teamwork skills with a flexible, can-do attitude and the ability to work independently, • Ability to accurately complete paperwork, timesheets, and reports, • Knowledge of Microsoft Word and Excel, • Willingness to work flexible hours, • Prepared to stay away from home regularly including travel across Europe on occasions, • Salary: £35k - £50k (depending on experience), • 28 days holiday, this includes the 8 days Bank/Public Holidays, incrementally increasing after 2 years to a max of 33 days, • Auto-enrolment into Company Pension Scheme, • Dental Care (subject to qualifying period), • Employee Assistance Programme (EAP), • Access to Company Benefits Platform, • Free on-site parking

We are seeking skilled Electrical Wirers for an ongoing contract in Berkshire. The successful candidate will play a crucial role in the assembly of heavy-duty cables and will be responsible for a variety of tasks related to cable assembly and wiring. Key Responsibilities: • Build & assemble heavy-duty cables., • Working with large heavy-duty connectors, plugs & sockets., • Perform cable crimping, looming and terminating work with precision., • Conduct point-to-point wiring in accordance with provided diagrams and instructions., • Assemble harnesses as per design requirements., • Execute single and 3-phase wiring tasks effectively., • Read and interpret wiring drawings and instructions accurately., • Utilise heavy-duty crimping tools to ensure high-quality connections. Qualifications and Requirements: • Electrical qualifications, ideally to 18th Edition Level., • Proven experience in cable assembly, particularly heavy-duty and rack assembly., • Familiarity with cable crimping, looming, and terminating techniques., • Experience in point-to-point wiring and working with a range of connectors., • Ability to read and understand wiring drawings and instructions., • Proficient in using heavy-duty crimping tools., • Previous experience with outside broadcast wiring is advantageous. Hours of Work: Monday to Thursday, 8.30am to 5pm, and Friday 7.45am to 4pm

Our client is a leading international live entertainment organisation, operating a diverse portfolio of venues, productions, and creative initiatives across the UK and globally. With a strong focus on delivering outstanding live experiences, the organisation brings together audiences, artists, and communities through high-quality productions and events. The venue-operating division manages multiple sites, including prominent regional theatres and internationally recognised performance spaces. The organisation is driven by values centred around creativity, collaboration, excellence, and respect. About the Role We are seeking a Deputy Buildings & Technical Manager to play a key role within the venue’s management team. Supporting the Buildings & Technical Manager, you will help lead the technical function, ensuring the smooth delivery of all productions, events, and building operations. This is a hands-on leadership role, combining technical delivery with team management, maintenance oversight, and health & safety compliance. You will contribute to maintaining high artistic standards while ensuring a safe, efficient, and well-maintained environment for performers, staff, and audiences. Key Responsibilities Technical Operations • Act as a key point of contact for visiting companies and artists, ensuring all technical requirements are delivered to a high standard, • Support day-to-day management of the technical department, including scheduling, rota planning, and budget monitoring, • Oversee technical delivery across lighting, sound, AV, staging, and rigging, • Provide hands-on technical support during performances and events where required, • Assist with production settlements, including technical recharges, • Support delivery of a proactive Planned Preventative Maintenance (PPM) programme, • Assist in ensuring compliance with statutory regulations (e.g. lifting equipment, electrical safety, fire safety, water hygiene), • Liaise with contractors, suppliers, and relevant authorities, • Support delivery of maintenance and capital projects, ensuring works are completed safely, on time, and within budget, • Supervise and support a team of technical staff and casual crew, • Assist with recruitment, onboarding, performance management, and development planning, • Support training and skills development across the department, • Promote and implement health & safety policies and best practices, • Prepare and review risk assessments and method statements, • Contribute to health & safety meetings and wider compliance initiatives, • Support emergency planning and incident response, • Ensure safe systems of work are followed by all staff and visiting companies About You You are a proactive and detail-oriented technical professional with a passion for live events and theatre. Comfortable working both strategically and hands-on, you bring strong leadership skills and a collaborative approach to team management. You thrive in a fast-paced environment, balancing technical delivery, operational oversight, and safety compliance, while maintaining high standards of service and production quality. Experience Required • At least 2 years’ experience in a senior technical or technical management role, • Proven experience leading and developing teams, • Strong technical knowledge across lighting, sound, staging, and rigging, • Experience managing health & safety processes and compliance, • Understanding of building maintenance within a live events or venue environment, • Health & Safety qualification (e.g. IOSH or NEBOSH), • IPAF, PASMA, or Working at Height certification, • Experience managing refurbishment or capital projects, • Knowledge of counterweight flying systems, • Familiarity with industry-standard lighting, sound, and AV systems, • This role may be subject to pre-employment screening (e.g. DBS or equivalent), • Flexibility is required, including occasional additional duties aligned to the role

We are seeking a highly skilled Solderer for an ongoing contract in Berkshire. The successful candidate will play a crucial role in the production of various types of cables. Key Responsibilities • Soldering Socapex connectors (18 way, cable sizes up to 2.5?mm²) to a high and repeatable standard, • Preparing, stripping, tinning, and terminating cables accurately and efficiently, • Working from wiring diagrams, build sheets, and workshop instructions, • Maintaining clean, neat, and reliable solder joints suitable for professional power distribution equipment, • Conducting basic continuity and quality checks on completed assemblies, • Managing your own workflow to meet daily and weekly output targets, • Keeping your workstation organised, safe, and production-ready, • Collaborating with the workshop team to ensure smooth production flow Essential Skills & Experience • Proven track record of fast, accurate soldering — this is non-negotiable, • Experience soldering multi-pin connectors (Socapex experience highly preferred), • Basic knowledge of power and electrical principles (e.g., cable ratings, polarity, safe handling), • Ability to follow technical drawings and wiring documentation, • Consistency: able to produce the same high standard repeatedly, not just occasionally, • Reliability and pride in workmanship

Senior MEP Project Manager £110,000–£125,000 + 10% Car Allowance Data Centre & Mission Critical Industrial Projects UK – Leading £1bn-Turnover Main Contractor Location: Slough and surrounding areas Our client is recruiting for an MEP Project Manager with a track record delivering large-scale, high-complexity projects. Our client—a Tier 1 main contractor with a turnover exceeding £1bn—is expanding its mission critical division and seeking a Senior MEP Project Manager to lead major data centre and industrial projects across Slough and surrounding areas, The Role: As Senior MEP Project Manager, you will take full ownership of MEP delivery across high-value, high-priority projects. You will work closely with internal teams, specialist subcontractors, consultants, and the client to drive excellence in programme, cost, safety, and technical performance. Key Responsibilities: • Lead MEP strategy, coordination, procurement, installation, and commissioning on flagship data centre and mission critical industrial schemes, • Manage multidisciplinary teams and specialist supply chain partners, • Ensure projects meet commercial, quality, and technical objectives, • Oversee programme delivery, risk management, and project reporting, • Maintain strong relationships with clients, consultants, and stakeholders, • Drive innovation and best practice across MEP systems, buildability, and delivery processes About You: • Proven experience delivering MEP packages on large-scale data centres or mission critical industrial projects, • Strong technical understanding across electrical, mechanical, and critical systems, • Ability to lead teams, manage complexity, and communicate at senior level, • Comfortable working within a Tier 1 contractor environment, • Driven, commercially aware, and solutions-focused What’s on Offer: • Competitive salary £110,000–£125,000, • 10% car allowance, • Opportunity to work on multi-million-pound, next-generation mission critical projects, • Clear progression pathways within a growing specialist division, • A stable, well-resourced major contractor with long-term project pipelines If you’re ready to take the lead on some of the most exciting mission critical projects in the UK, we’d love to hear from you.

Data Centre Engineer (M&E) Location: Slough Continental Shift Pattern Salary: £53K + benefits We’re looking for a Critical Shift Engineer to join a data centre environment, supporting 24/7 operations and ensuring uptime across critical electrical and mechanical systems. This role is ideal for engineers from building services, FM, or industrial backgrounds looking to work in a mission-critical environment. The Role • PPM & reactive maintenance on critical systems (UPS, generators, HV, cooling, BMS), • Monitoring plant and responding to alarms/incidents, • Fault finding and supporting incident & change management, • Issuing permits to work and supporting safe systems (RAMS), • Working closely with contractors and site teams What We’re Looking For • Electrically qualified (apprenticeship / C&G or equivalent), • Experience in building services or critical environments, • Exposure to UPS, generators, HVAC, HV/LV or BMS systems, • Strong problem-solving skills and ability to work under pressure, • Willingness to work a continental shift pattern Data Centre Engineer (M&E) Location: Slough Continental Shift Pattern Salary: £53K + benefits

The Role Mitie is looking for a technically qualified and commercially focused Facilities Manager to oversee the delivery of both hard and soft FM services across a portfolio of sites in Slough and the Home Counties. This is a key client-facing role requiring strong operational leadership, technical expertise, and the ability to drive service excellence across a diverse estate. Key Responsibilities • Manage the end-to-end delivery of hard services (M&E, compliance, PPM, reactive maintenance) and soft services (cleaning, security, catering, waste, etc.), • Ensure all technical services are delivered in line with statutory compliance and health & safety regulations, • Act as the primary point of contact for clients, building strong, trusted relationships, • Lead, develop, and performance-manage on-site teams and specialist subcontractors, • Oversee asset management, lifecycle planning, and maintenance strategies, • Manage budgets, drive cost efficiencies, and identify value-add opportunities, • Monitor service delivery against KPIs and SLAs, implementing continuous improvement initiatives, • Produce regular reports, support audits, and ensure governance standards are met, • Support mobilisation and project delivery across the portfolio when required About You • Proven experience managing both hard and soft FM services in a client-facing environment, • Technical background essential (e.g., engineering, M&E, building services), • Relevant qualifications such as HNC/HND/Degree in Engineering or Building Services (or equivalent experience), • Strong understanding of statutory compliance, including HVAC, electrical, and building systems, • Demonstrable experience managing multi-site operations, • Excellent leadership and stakeholder management skills, • IOSH/NEBOSH qualification or equivalent (desirable), • Commercially aware with experience managing budgets and driving efficiencies, • Full UK driving licence

Shift Engineer (Electrical Biased) Slough £52,000 12hr Shifts - 4on 4off Days & Nights Our client is an industrial processing business, part of a larger group, with multiple sites in the UK. Due to an increase in headcount within their engineering team, they are looking for an experienced electrical biased shift engineer. Role & Responsibilities of a Shift Engineer: • To carry out planned preventative, predictive and breakdown maintenance, repairs, refurbishment, installation, improvement and modification or upgrade of plant, fully automated production & packaging machinery and site services., • Steam & boiler system maintenance, • Follow PPM schedules efficiently & effectively, • Electrical fault finding & modifications of PLC's, HMi's, SCADA Systems and Control Panels, • Mechanical repair and fault finding, • Working on hydraulics, pneumatics, pumps, motors, contactors, inverters, sensors, drives, valves, • Multi-Skilled Engineer - but must be electrically biased, • NVQ Level 3 Electrical Engineering - Time-served Apprenticeship, • Excellent problem solving & fault diagnosis skills, • Knowledge of production environment, continuous improvements & development, • Both strong electrical & mechanical fault finding and repair skills, • Must have worked in fast-paced environment - FMCG manufacturing/production, • Have experience of working on boilers & steam systems advantageous, • Worked on PLC systems, Control Panels, HMi's & SCADA Systems If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. Job Tenure: Permanent Salary: £50000 - £52000 per annum + Benefits Location: Slough, Berkshire

Field Service Engineers - Specialist Hydraulic equipment Locations: Southeast England - Based in Slough, Oxford, Reading, Woking, Guildford, Crawley or surrounding areas Salary: £35,000 - £40,000 per annum + Door to door paid travel On-Target Earnings (OTE): £45,000+ Are you a skilled Service Technician with a strong electrical or mechanical background? Do you enjoy working on a wide range of equipment and delivering high-quality service? We're recruiting experienced engineers to join a market-leading manufacturer whose service team is renowned for supporting household-name clients with fault-finding, repairs, maintenance, and technical support. • Provide electrical and mechanical support, prodominantly on dock levellers and specialist loading bay equipment., • Assist with installations when necessary, • Participate in an occasional on-call rota and responsibly manage company tools, vehicle, and stock, • Experience in field service or other relevant electrical or mechanical engineering., • Strong mechanical or electrical fault-finding skills., • Experience with lifting equipment or similiar (desirable), • Welding experience (desirable), • Valid certifications:, • Electrical qualifications, or relevant experience If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. Job Tenure: Permanent Salary: £35000 - £40000 per annum + Door to door paid travel Location: Slough, Berkshire

Shift Engineer Slough c£52k + Great Benefits + Overtime + Training & Development Permanent – Shifts I am currently looking for Shift Engineers to strengthen a busy Production Team based in the Slough area Working with electrical, mechanical and pneumatic equipment, your key responsi

Job title: Senior Battery Design Engineer Location: Maidenhead, Berkshire Salary Range: Negotiable The Malloy Aeronautics Team: Malloy Aeronautics Limited specializes in the development of heavy lift unmanned air vehicles (UAVs) for both civilian and military uses. Located in Berkshire, our operations are notable for their focus on in-house design and manufacturing. This vertical integration means we control the production of most aircraft components on-site, enhancing our ability to innovate and maintain high standards across all stages of development. About The Role: Malloy Aeronautics are looking for an engineer with experience working with pouch cell integration to join our concept development team. This role will focus on the development of batteries from a set of requirements to production product. This role suits an engineer who has a broad skillset across battery design elements and enjoys spending time hands-on building and testing. Ability to hold Security Clearance – 5 years residence in the UK What you’ll being doing: • Leading the physical design of Malloy’s battery platforms developing packs from a concept stage to production., • Interface with other engineering groups on collaborative projects to deconflict integration issues and execute against project plans., • Developing test and validation plans for battery packs, and analysing test data to refine pack design, • Developing prototype and/or concept battery packs with novel technologies, • Working with and supporting suppliers to ensure parts are on time and designed to best suit their needs., • Generating technical documentation, reports, and supporting build guide development Essential Skills and Experiences: • Relevant degree in engineering, • Prior in-depth experience in battery pack design and cell integration., • Experience using, designing, integrating and packaging pouch cells., • Experience with battery thermal management methodologies., • Knowledge of cell connection methodologies including laser welding., • Experience with a wide variety of production processes including but not limited to lathe, 3-5 axis machining, water jet, laser cut, punch, bending, welding, casting, various 3d printing types and injection moulding., • Experience using CAD software, ideally SolidWorks., • Experience designing for high voltage applications and relevant practical high voltage training (preferably SAP/level 3), • Knowledge of project lifecycle management, developing requirements, and working in a gated design environment. Desired Skills and Experiences: • Experience in high-performance and/or high pack factor battery applications such as motorsport, aerospace, etc., • Electrochemical knowledge & experience in lab environment, • Pack simulation using FEA/CFD packages (thermals, electrical simulation, vibration etc.), • Experience working with mass critical systems, • Experience with high vibration applications, • Familiarity with text-based programming, • Knowledge of battery testing standards Benefits you may be eligible for: • Working Environment: 9-day fortnight:, • Free parking, free lunch on working Fridays’, fruit twice a week, tea and coffee., • Company Pension Scheme, • Discretionary Employee Incentive Bonus Scheme, • Employee Share Incentive Plan (BAE Systems), • Company Sick Pay, • Maternity and Paternity enhanced Leave, • Healthcare Cash Plan including Virtual GP, Dental Cover, Vision Cover, Discounted Gym Membership, and much more! Free coverage for children under 2 years old., • 20 days Annual Leave, increasing with long service, • Employee Assistance Programme (24hr Helpline), • Mental Health First Aiders, • Cycle to Work Scheme, • Casual Dress, • Bronze Level Armed Forces Covenant which signals our commitment to supporting the Armed Forces. Why Malloy Aeronautics? Our company benefits from a streamlined process where engineering teams are involved in the entire lifecycle of our UAVs - from initial design through to production. This setup not only speeds up the development process but also improves the efficiency and effectiveness of our product launches. We value professionals who have a background in both research and development (R&D) and design for manufacture, as their expertise is crucial to our rapid and precise product development cycle. Malloy Aeronautics employees will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Malloy Aeronautics is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition that may affect your performance in certain assessments or interviewing, please speak to your recruiter about potential reasonable adjustments. Note: If you have not heard from our recruitment department within 14 days, unfortunately you have not been successful. Malloy Aeronautics and BAE Systems may process information about you that may be subject to data protection laws. For more information about how we use and protect your personal information and your rights, please refer to our Privacy Notice.

Key Skills: Coordination of Equipment Movement, Warehousing, Leadership and Support, Liaison between Account Management and end customer, Liaison with distribution teams, must have excellent communication skills.Ideally Electrical Related Experience, Lighting, Cabling, LED Screens, Audio, Etc or sim

Are you an Electrical & Instrumentation Technician looking for your next contract opportunity? If so, please read on... Electrical + Instrumentation Technician Do not pass up this chance, apply quickly if your experience and skills match what is in the following description. Hampshire: 5 days a week onsite 6 month initial contract £38-£42 per hour outside of IR35 Essential Skillset: • 5+ years maintenance experience xrnqpay on equipment related to the installed instrument and/or electrical equipment., • Experience working wit...

Shift Engineer (Electrical Bias) Slough £52,000 + Overtime ? Join a highly automated, fast-paced site with a strong engineering culture and award-winning health & safety standards. You'll be part of a close-knit team where attitude, teamwork, and reliability are just as important as technical ability. Perks include: • Days & Nights 12 hour shifts⏱️, • Enhanced overtime rates ?, • 8% pension ?, • Highly automated, modern site ?, • Strong team culture & supportive environment ?, • Ongoing continuous improvement projects ? ⚡ Looking for a hands-on, electrically biased engineer who thrives in a fast-moving, automated environment and can keep complex systems running at peak performance. ? Roles & Responsibilities • Carry out planned and reactive maintenance across a fully automated production site, • Diagnose and repair electrical & mechanical faults on a wide range of equipment, • Work on conveyors, monorails, washers, steam systems, and pneumatic and hydraulic machinery, • Support continuous improvement and reliability projects across the site, • Ensure all work is completed safely and in line with site standards ?️ What We're Looking For • Electrically biased engineer with strong fault-finding (PLC & control panels), • Experience in fast-paced production (FMCG, laundry, or similar), • Able to read electrical/pneumatic drawings and work independently when needed ? If you're interested or want to hear more, get in touch directly. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. Job Tenure: Permanent Salary: Up to £52000 per annum + BENEFITS Location: Slough, Berkshire

Shift Engineer (Electrical Bias) Slough £52,000 + Overtime 💡 Join a highly automated, fast-paced site with a strong engineering culture and award-winning health & safety standards. You'll be part of a close-knit team where attitude, teamwork, and reliability are just as important as technical ability. Perks include: * Days & Nights 12 hour shifts⏱️ * Enhanced overtime rates 💰 * 8% pension 📊 * Highly automated, modern site 🤖 * Strong team culture & supportive environment 🤝 * Ongoing continuous improvement projects 📈 ⚡ Looking for a hands-on, electrically biased engineer who thrives in a fast-moving, automated environment and can keep complex systems running at peak performance. 🔩 Roles & Responsibilities * Carry out planned and reactive maintenance across a fully automated production site * Diagnose and repair electrical & mechanical faults on a wide range of equipment * Work on conveyors, monorails, washers, steam systems, and pneumatic and hydraulic machinery * Support continuous improvement and reliability projects across the site * Ensure all work is completed safely and in line with site standards 🛠️ What We're Looking For * Electrically biased engineer with strong fault-finding (PLC & control panels) * Experience in fast-paced production (FMCG, laundry, or similar) * Able to read electrical/pne...

I am excited to partner with a leading power protection company who have an immediate requirement for a Service Engineer in the South. The successful Service Engineer must be willing to travel and stay away from home overnight occasionally. Candidates will ideally live within 50 miles of the M25 and will travel to customer sites in the South (including London) carrying out service, maintenance and repairs to the companys range of equipment. Candidates living in or close to the following locations are of particular interest, Watford, Bishops Stortford, Bletchley, Buckingham, Bedford, Luton, Slough, Reading, Swindon, Crawley, Camberley, Guildford, Horsham, Maidstone or close surrounding areas. Due to the nature of the role candidates will need to undertake and pass security checks. This is an exciting opportunity for engineers leaving the military with an electronic bias. In return you will join an established company and friendly engineering team where you will manage your own work schedule and time. The role comes with an attractive salary and benefits package. Service Engineer Requirements: • Hold a relevant recognised Electronic/Electrical engineering qualification to Level 3 as a minimum., • Proven experience of working with electronic equipment with a strong technical understanding of electronics and electrics., • Able to read and interpret electrical ...

Day Rate: £245 - for 2.5 jobs completed per day (e.g. 2x Dual & 1 Single Installation / transactional jobs) Bonus: + £35 for any jobs completed over 5 per day, - £35 for any jobs completed under 2.5 per day. Uncapped commission. Introduction • Full end to end installation of Electric & Gas smart meters, including commissioning and transactional work. • Engineers will receive a minimum on 5 jobs per day, for example x2 dual installations and x1 single installation/transactional jobs. • Engineers will have access to national help desks, using a tablet and phone to work through the commissioning process or diagnosing a fault. (MUST be confident using tech) • Big focus on safety, regular visits from managers for HSE assessments and SAE visits. Scope of work • EDI – Electric dumb install • GDI – Gas dumb install • IHD – Ppmid install or exchange • ESR/EDR Electric removal • GSR/GDR Gas removal • De-energise/Re-energise – Isolator install or exchange • ESX – Electrical smart exchange • GSX – Gas smart exchange • ESX- IHD exchange • ESF – Electric smart fault smet1 or smet2 • GSF – Gas smart fault smet1 or smet2 • ESI – Electric smart install (isolator needs fitting) • GSI – Gas smart install (cap meter, leave capped sign) • Comms h...

Steam & boiler system maintenance Follow PPM schedules efficiently & effectively Electrical fault finding & modifications of PLC's, HMi's, SCADA Systems and Control Panels Mechanical repair and fault finding Working on hydraulics, pneumatics, pumps, motors, contactors, inverters, sensors, dr

We are seeking skilled Electrical Wirers for an ongoing contract in Berkshire. The successful candidate will play a crucial role in the assembly of heavy-duty cables and will be responsible for a variety of tasks related to cable assembly and wiring. Key Responsibilities: Build & assemble heavy-duty cables. Working with large heavy-duty connectors, plugs & sockets. Perform cable crimping, looming and terminating work with precision. Conduct point-to-point wiring in accordance with provided diagrams and instructions. Assemble harnesses as per design requirements. Execute single and 3-phase wiring tasks effectively. Read and interpret wiring drawings and instructions accurately. Utilise heavy-duty crimping tools to ensure high-quality connections.Qualifications and Requirements: Electrical qualifications, ideally to 18th Edition Level. Proven experience in cable assembly, particularly heavy-duty and rack assembly. Familiarity with cable crimping, looming, and terminating techniques. Experience in point-to-point wiring and working with a range of connectors. Ability to read and understand wiring drawings and instructions. Proficient in using heavy-duty crimping tools. Previous experience with outside broadcast wiring is advantageous. Hours of Work: Monday to Thursday, 8.30am to 5pm, and Friday 7.45am to 4pm...

ELECTRICAL MAINTENANCE ENGINEER. Electrical Maintenance Engineer. Job Role of the Electrical Maintenance Engineer.

Contract: PermanentSalary: Starting salary of 22,500 per annumStart your Project Engineer career with Thames Water Kickstart your future supporting the UKs largest water and wastewater provider.Youllhelp deliver a portfolio of small to medium capital projects and learn how engineering solutions keep our services running for millions of customers. What youll do as a Project Engineer Level 4 • Support delivery of mechanical, electrical, civil, control, and instrumentation projects up to 5m., • Work with operations and contractors to scope, specify, and cost valueformoney solutions., • Promote a zerocompromise approach to health & safety and ensure CDM compliance., • Collaborate with delivery partners to keep projects on time and reduce business risk., • Draft and review RAMS, project plans, CPPs, and commissioning documents., • Oversee commissioning and handover to operational teams., • GCSE Maths and English (grade 9 - 4 / A - C), • 64 UCAS points fromany combination of acceptable level 3 qualifications, • A full UK Driving licence as you will be required to travel across Thames Water sites. If using your own vehicle, you'll need to have Business use on insurance policy, • Passionate about learning and aligned with Thames Waters goals for the future Whatsin it for you?, • Starting salary of 22,500 per annum, • Annual Leave: 24 days holiday per year increasing to 28 with the length of service (plus bank holidays), • Performance-related pay plandirectly linkedto company performance measures and targets, • Generous Pension Scheme through AON

Contract: PermanentSalary: Offering up to 42,000 per annum depending on skills and experience. plus Overtime opportunities can increase this earning potential by up to a further 8,000-10,000 per annum upon completion of essential company trainingWe are currently recruiting for an Electrical Technician to join our waste team in the Wargrave area. As the successful candidate, you will be working in a multi-disciplinary team and will be responsible for carrying out scheduled, unscheduled and emergency maintenance work on all electrical equipment in compliance with company procedures to minimise plant breakdown. This is an excellent opportunity to make a real difference to Thames Water's environmental impact, and you will be actively helping to reduce pollution from our sites. What youll be doing as the Electrical Technician • Investigate plant failures and carry out repairs as quickly and efficiently as possible to avoid interruptions to the process. This may involve investigating and diagnosing complex faults and carrying out repairs during incidents., • You will be expected to provide technical advice, refer to up-to-date technical knowledge, and provide training or support for technical trainees if required., • You should be a time-served apprentice with significant experience in electrical systems or with NVQ or C&G level 3 in electrical engineering., • 18th Edition., • A problem solver, able to identify potential issues and implement solutions, or escalate if required., • An excellent communicator, providing technical expertise to Internal and External staff and contractors., • Resilient, adapting to the pressures of work and working in a constantly changing environment., • Ability to work with minimum supervision, under own initiative to design and standards., • Knowledge and awareness of Health and Safety issues relevant to the industry., • Team player who can work in many different teams, showing respect for others, providing helpful feedback and supporting the development of others., • Offering up to 42,000 per annum, depending on skills and experience., • Standby rota payments & Overtime opportunities can increase this earning potential by up to a further 8,000-10,000 per annum upon completion of essential company training., • Performance-related pay plan directly linked to company performance measures and targets., • Annual Leave: 24 days holiday per year, increasing to 28 with the length of service (plus bank holidays)., • Generous Pension Scheme through AON.

Wiring Harness Technician Bedfordshire £35,000 Have you worked in precision environments before and want to apply all of those skills to top secret projects? This will be some of the most complex assemblies you have worked on, so bring you're 'A' game! The role; We are currently recruiting for experienced Wiring Harness Technicians to join a highly skilled manufacturing team working on complex electrical assemblies and cable harness systems. You will be responsible for working from detailed engineering drawings to IPC620 standards. The business; You will be working for a well-known name in the aerospace industry, working on high value, safety critical R&D projects. The business make one off assemblies, so each day will be different! What we need from you; IPC620 standard certification / prior experience Experienced working from engineering drawings for wiring harness assembly Use of hand tools, crimp and soldering tools Knowledge of inspecting own work Sounds good right? Click apply and Chris Smith will be in touch with the details! Even if your CV isn't fully up to date, click apply and Chris can help you fill in the blanks...

Electrical Technician £35,000 - £38,000 + Training + Overtime + Progression + Private HC + Pension + Company Benefits Slough (Fully site based) Do you have hands on electrical experience? Are you looking to join a rapidly growing business who will invest heavily in your developm

Electrical Wireman Colnbrook, Slough, SL3 £18-24 per hour ( LTD/Umbrella) Proactive Global currently have an exciting opportunity for an experienced Electrical Wireman to begin work for a leading business in Colnbrook, Slough, SL3. Key Responsibilities of the Electrical Wireman: Must have

Electrical Trainer & Assessor - Long Term Contract Remote - Southern UK based Circa £28 per hour + Training + Progression + Benefits Package + Vehicle or Car Allowance Position for an Electrical Trainer and Assessor to deliver Electrical Installation and Electrical Maintenance courses to corp

Key Responsibilities * Day-to-day management of electrical works on site * Ability to read drawings * Managing labour, subcontractors, and materials * Coordinating with the main contractors * Ensuring works are delivered safely, on programme, and to a high standard * Maintaining si

Electrical Construction Manager – Data Centres, Slough – Leading Contractor We are working with a leading M&E Contractor with a strong reputation in the data centre and commercial fit-out sectors is looking to appoint an Electrical Construction Manager to support a growing portfolio of data centre projects in Slough. With continued growth and a strong pipeline of work in the region, this is an excellent opportunity to join a well-established contractor delivering mission-critical infrastructure projects. Key Responsibilities * Managing electrical construction activities on data centre projects * Coordinating site teams and subcontractors * Overseeing critical infrastructure works, including busbar replacements * Ensuring works are delivered safely, on programme, and to specification * Liaising with project managers, design teams and clients Requirements * Experience as an Electrical Construction Manager / Electrical Supervisor * Background delivering data centre or critical infrastructure projects * Experience with busbar replacement projects * Strong electrical construction and site management experience * Able to work on-site in Slough 5 days per week Benefits * Market-leading salary * Private Healthcare * Pension Scheme * Length of Service Reward Scheme * Travel Allowance This is a great opportunity to join a highly regarded M&E contractor wor...

Location: London/ North/west of EnglandPosition is remote, traveling expectation 100% Unlock Your Potential at Eaton: Where Diversity Drives Innovation. No matter where you come from, your aspirations matter to us. We believe in the power of different perspectives, experiences, and backgrounds to ignite innovation and drive success. We're in the business of empowering people, and that includes you. Your journey here is not just about a job; it's about a shared vision for a brighter, more sustainable future.We are ethical - We are passionate - We are responsible - We are efficient - We are transparent - We are learning. We are EATON!We're now looking for a number of Power Distribution Engineers to join our growing team.Are you a skilled and safety-conscious electrical engineer with a passion for medium voltage (MV) systems? Eaton is seeking a number of EMEA Power Distribution Lead Engineers to join our dynamic team, delivering high-quality installation and maintenance services across EMEA.In this role, youll be the face of Eaton for our customers leading installation projects and oversee 3rd party providers , supporting fellow engineers, and ensuring our MV equipm...

The ideal candidate will have a strong electrical background and hold electrical qualifications such as NVQ/SVQ Level 3 in electrical installations or maintenance (or equivalent) and 18th edition as a minimum. The purpose of this role carry out planned and reactive maintenance on electrical and mech

An excellent opportunity has arisen for an experienced Maintenance Electrician to join one of the country's leading Facilities Management companies working around Slough and the surrounding areas such as Uxbridge, Watford, Windsor and Woking The ideal candidate will have a strong electrical bac

Install Electrician - Reading, Berkshire I'm working with a busy electrical installation company who work within commercial & industrial environments mainly.

Key Responsibilities: * Installation, maintenance, and repair of industrial electrical systems and equipment * Working from and interpreting electrical drawings and schematics * Supporting projects across multiple sites nationwide * Ensuring all work is completed safely and in line with indu

Electrical Installation Assessor (Full Training Provided) Langley / Berkshire (Site-Based with Travel) £37,000- £48,000 + Comprehensive Training + Career Progression + Excellent Benefits + Generous Holiday Package Are you an experienced Electrician or Electrical Assessor? Do you want to step off the tools and into a rewarding role where you can support and develop apprentices in the workplace, while enjoying excellent benefits, career progression, and job satisfaction? Join a highly regarded College with a strong reputation for delivering high-quality Apprenticeships and supporting both staff and learners. With a focus on employer engagement and learner success, this is a fantastic opportunity to play a key role in shaping future electrical professionals. As an Electrical Assessor, you'll manage a caseload of apprentices, supporting them through their apprenticeship journey with regular site visits, coaching, and assessments. You'll work closely with both learners and employers to ensure progress, track development, and guide apprentices through to End Point Assessment. The ideal candidate will be an experienced and organised electrical professional who is passionate about developing others. You must hold an NVQ Level 3 (or equivalent), 18th Edition, and AM2. An assessor qualification (A1/CAVA) is highly desirable, though training can be provided. You'll be confident working independently, managing your o...

Pump Engineer £42,500 Upto £50,000 depending on experience on a 40 hour contract + Up to double time overtime Slough/Reading/London & surrounding areas. Full Time | Permanent | Monday to Friday Are you an experienced Pump Engineer? Are you commutable to Maidenhead to collect supplies? Attega Group is currently partnering exclusively with our client in recruiting a Pump Engineer to join the team. The main purpose of this role is to perform general electrical and mechanical engineering duties to ensure that the pump systems and associated equipment are operating as specified and performing on-site repairs, maintenance and installations of equipment and machinery. In return, our client is offering a salary of up to £50,000, depending on experience, plus company van, fuel card, up to double time over time, 25 days annual leave. This is a full-time, permanent The hours of work will be 07:00 – 15:30 Monday – Friday. Reporting to the Hiring Manager your responsibilities will include: Carry out maintenance, repairs, commissioning and installations of pump systems and associated equipment. Conducting preventive maintenance checks and routine inspections to identify potential issues and ensure equipment reliability. Could include equipment installations, upgrades and fault finding/diagnosing equipment problems and providing timely and effective solutions. Participate in our Emerg...

A really great opportunity to work with a commercial catering equipment contractor that covers across the south east and midlands area. They reward their engineers by providing great benefits and always looking after their employees. This shows.... their engineers are well trained and their clients are always happy. They are owned by a large company which also gives them great buying power to further give their clients a great price and service Salary and Benefits of a COMCAT Commercial Catering Engineer * 51k basic salary * Bonuses for extra jobs performed and unsociable hours – 64-66k OTE * Van, phone, fuel card, uniform, full benefits package * No call out rota As a commercial catering equipment service engineer you will be:- * Covering London, mostly around the west and north side as well central * Providing service and maintenance on commercial catering equipment (COMCAT and electrical) * Working on combi ovens, grills, burners, fryers, and other gas and electrical catering equipment * Working with clients such as commercial properties, pub chains, restaurants, hotels and blue chip companies Skills Needed to be a COMCAT engineer * Experience doing service and maintenance on commercial catering equipment * COMCAT’s 1 and 3 as a minimum with COMCAT 5 and LPG being beneficial * Living in or around the North, west, or south west London area, Middlesex, Hertfordshire, or Buc...

Job Title: Senior Systems Engineer - Hardware & Secure Systems Location: Loudwater Salary: £DOE Are you a Systems Engineer who thrives on complexity, security, and real-world impact? As a dedicated recruitment partner at ESCO Maritime, we are looking for a Senior Systems Engineer to lead the development of secure, hardware-centric systems in a highly regulated environment where precision, resilience, and innovation are critical. This is a role for someone who enjoys owning the full system lifecycle, influencing design decisions, and working at the intersection of hardware, software, and secure architectures. The Role You'll take a lead position in delivering complex systems from concept through to in-service support, with a strong focus on secure design, hardware integration, and systems assurance. Key responsibilities include: End-to-End Lifecycle Ownership - Define and manage system lifecycles from concept to retirement, ensuring robust governance and clear design decisions Requirements Engineering - Capture, analyse, and manage complex, traceable requirements, ensuring alignment across multidisciplinary teams System Architecture & Design - Develop secure, hardware-led architectures with full traceability from requirement to solution Technical Leadership - Lead cross-functional engineering teams (hardware, software, electrical), driving delivery and resolving technical challenges Integration, Verification & Valida...

Carry out full MET (Mechanical, Electrical & Trim) stripping and refitting of vehicles. Job Title: MET Technician (Mechanical, Electrical & Trim). Our client, a leading name within the automotive accident repair and bodyshop industry, is looking for an experienced MET Technician to join their busy a

Job Title: Electrical Supervisor Job Type: Temporary Location: Maidenhead Rate of pay: £320 per day Are you an Electrical Supervisor looking for work? ARC are currently looking for an Electrical Supervisor. BENEFITS OF WORKING FOR ARC Working with one of the leading Recruitment agencies

Mechanical Construction Manager Slough £70,000 - £75,000 + Travel Allowance + Company Car + Bonus + Private Healthcare + Pension + Holidays + Clear Progression + Major Data Centre Projects Take on the role of Mechanical Construction Manager with a Tier 1 contractor, rapidly developing in the data centre industry. This is a unique opportunity to work for one of the largest construction companies in the world. By joining their Building services team, you will be able to deliver high-quality solutions and projects. This role is perfectly suited to someone with a mechanical background You'll be supported, developed, and given real responsibility on live projects, with a clear route for progression. You will be based in Slough, with a long pipeline of projects in this area. This contractor is known for investing heavily in its people and promoting from within. Your Role as a Mechanical Construction Manager Will Include: • Supporting and overseeing the on-site delivery of mechanical and/or electrical packages on complex construction projects., • Coordinating subcontractors, suppliers, and site teams to ensure works are delivered safely, on time, and to specification., • Assisting with day-to-day site management, progress tracking, and programme reporting., • Working closely with senior construction manager...

Electrical Site Supervisor (CAT 3) 6 month contract Slough £350 per day (OUTSIDE IR35) Grenn Scout have engaged exclusively with Industry leader withing the Energy division, who provide solutions across private networks, renewable energy, battery energy storage solutions (BESS), data centr

Electrical Engineer Sector: FMCG Manufacturing Salary: £45,(Apply online only) Shift: Days Location: Gerrards Cross, Buckinghamshire I am currently working with a FMCG manufacturer that is investing heavily in its people, equipment, and future growth. Due to continued expansion, they are looking to recruit an Electrical Engineer for one of their UK manufacturing sites. This is a great opportunity for an Electrical Engineer ideally from a manufacturing background to join a growing FMCG business that offers extensive training and development, clear progression, and a supportive engineering culture. As an Electrical Engineer, you will be responsible for electrical maintenance, fault-finding, and continuous improvement across production and machinery, supporting both planned maintenance and reactive breakdowns in a fast-paced environment. Sector – Factory Maintenance Non-Negotiable Requirements for the Multi Skilled Maintenance Engineer: Multi Skilled Maintenance Engineer Electrical Bias Requirements for the Multi Skilled Maintenance Engineer: Industrial/ Manufacturing experience Desirable Requirements for the Multi Skilled Maintenance Engineer: Previous experience working as a Multi Skilled Maintenance Engineer in the UK. If you are interested in this role and feel that you have the right skills then please click apply at the bottom of this advert. For further details contact Nathan Davis a...

Your new employer is a leading global facilities management provider, and they are looking for a skilled Data Centre Shift Leader to join their team inSlough, West London. This is an excellent opportunity to step into a leadership role within a critical environment, offering long-term stability, progression, and exposure to high-value infrastructure. What you'll be doing: • Leading and coordinating shift activities to ensure all maintenance tasks are completed safely and efficiently, • Supervising planned, reactive, and corrective maintenance across electrical and mechanical systems, • Acting as a point of escalation for engineers and supporting the shift team in day-to-day operations, • Operating and isolating systems safely, ensuring compliance with site procedures and risk controls, • Managing subcontractors on site, ensuring works are delivered to the required standards, • Reviewing permits to work, RAMS, and ensuring full compliance with QHSE procedures, • Completing shift handovers, reports, and maintaining accurate maintenance records, • Role - Data Centre Shift Lead, • Paying Up to £55,100 per annum, • Continental shift pattern (days and nights)

Test Technician – RF / Electronics – £20/hr (Inside IR35) – Onsite (Maidenhead) We’re looking for a Test Technician to support the production of high-performance RF and communications equipment within a hands-on manufacturing environment. This role involves testing, fault-finding, and assembly work, ensuring products meet quality and technical standards across the production lifecycle. You’ll be working closely with the production team in a fast-paced, detail-driven setting. Skills & Experience: Essential: • Experience in electronics testing, fault finding, or assembly, • Ability to read and work from technical drawings and schematics, • Understanding of electrical principles (RF knowledge beneficial), • Comfortable using test equipment and production software, • Strong attention to detail and quality standards Desirable: • Experience within RF, telecommunications, or similar industries, • Exposure to ATE testing or module programming, • Experience working in a production or manufacturing environment Additional Information: • £20/hour (Inside IR35), • Full-time onsite (Maidenhead), • 37.5 hours per week (Mon–Fri), • Unlimited overtime paid in full, • Hands-on production environment